# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Make certain that the script is running in an internationalized
+# environment.
+LANG=c ; export LANG
+LC_ALL=c ; export LC_ALL
+
+
compare_new ()
{
file=$1
# Number of bits in a double for the target machine.
v::TARGET_DOUBLE_BIT:int:double_bit::::8 * sizeof (double):8*TARGET_CHAR_BIT::0
# Number of bits in a long double for the target machine.
-v::TARGET_LONG_DOUBLE_BIT:int:long_double_bit::::8 * sizeof (long double):2*TARGET_DOUBLE_BIT::0
+v::TARGET_LONG_DOUBLE_BIT:int:long_double_bit::::8 * sizeof (long double):8*TARGET_CHAR_BIT::0
# For most targets, a pointer on the target and its representation as an
# address in GDB have the same size and "look the same". For such a
# target, you need only set TARGET_PTR_BIT / ptr_bit and TARGET_ADDR_BIT
f::TARGET_READ_PC:CORE_ADDR:read_pc:ptid_t ptid:ptid::0:generic_target_read_pc::0
f::TARGET_WRITE_PC:void:write_pc:CORE_ADDR val, ptid_t ptid:val, ptid::0:generic_target_write_pc::0
f::TARGET_READ_FP:CORE_ADDR:read_fp:void:::0:generic_target_read_fp::0
-f::TARGET_WRITE_FP:void:write_fp:CORE_ADDR val:val::0:generic_target_write_fp::0
f::TARGET_READ_SP:CORE_ADDR:read_sp:void:::0:generic_target_read_sp::0
f::TARGET_WRITE_SP:void:write_sp:CORE_ADDR val:val::0:generic_target_write_sp::0
# Function for getting target's idea of a frame pointer. FIXME: GDB's
# These pseudo-registers may be aliases for other registers,
# combinations of other registers, or they may be computed by GDB.
v:2:NUM_PSEUDO_REGS:int:num_pseudo_regs::::0:0::0:::
-v:2:SP_REGNUM:int:sp_regnum::::0:-1
-v:2:FP_REGNUM:int:fp_regnum::::0:-1
-v:2:PC_REGNUM:int:pc_regnum::::0:-1
+
+# GDB's standard (or well known) register numbers. These can map onto
+# a real register or a pseudo (computed) register or not be defined at
+# all (-1).
+v:2:SP_REGNUM:int:sp_regnum::::-1:-1::0
+v:2:FP_REGNUM:int:fp_regnum::::-1:-1::0
+v:2:PC_REGNUM:int:pc_regnum::::-1:-1::0
+v:2:PS_REGNUM:int:ps_regnum::::-1:-1::0
v:2:FP0_REGNUM:int:fp0_regnum::::0:-1::0
v:2:NPC_REGNUM:int:npc_regnum::::0:-1::0
v:2:NNPC_REGNUM:int:nnpc_regnum::::0:-1::0
F:2:REGISTER_BYTES_OK:int:register_bytes_ok:long nr_bytes:nr_bytes::0:0
f:2:CANNOT_FETCH_REGISTER:int:cannot_fetch_register:int regnum:regnum:::cannot_register_not::0
f:2:CANNOT_STORE_REGISTER:int:cannot_store_register:int regnum:regnum:::cannot_register_not::0
+# setjmp/longjmp support.
+F:2:GET_LONGJMP_TARGET:int:get_longjmp_target:CORE_ADDR *pc:pc::0:0
#
+# Non multi-arch DUMMY_FRAMES are a mess (multi-arch ones are not that
+# much better but at least they are vaguely consistent). The headers
+# and body contain convoluted #if/#else sequences for determine how
+# things should be compiled. Instead of trying to mimic that
+# behaviour here (and hence entrench it further) gdbarch simply
+# reqires that these methods be set up from the word go. This also
+# avoids any potential problems with moving beyond multi-arch partial.
v:1:USE_GENERIC_DUMMY_FRAMES:int:use_generic_dummy_frames::::0:-1
v:1:CALL_DUMMY_LOCATION:int:call_dummy_location::::0:0
f:2:CALL_DUMMY_ADDRESS:CORE_ADDR:call_dummy_address:void:::0:0::gdbarch->call_dummy_location == AT_ENTRY_POINT && gdbarch->call_dummy_address == 0
v:2:BELIEVE_PCC_PROMOTION:int:believe_pcc_promotion:::::::
v:2:BELIEVE_PCC_PROMOTION_TYPE:int:believe_pcc_promotion_type:::::::
f:2:COERCE_FLOAT_TO_DOUBLE:int:coerce_float_to_double:struct type *formal, struct type *actual:formal, actual:::default_coerce_float_to_double::0
+# GET_SAVED_REGISTER is like DUMMY_FRAMES. It is at level one as the
+# old code has strange #ifdef interaction. So far no one has found
+# that default_get_saved_register() is the default they are after.
f:1:GET_SAVED_REGISTER:void:get_saved_register:char *raw_buffer, int *optimized, CORE_ADDR *addrp, struct frame_info *frame, int regnum, enum lval_type *lval:raw_buffer, optimized, addrp, frame, regnum, lval::generic_get_saved_register:0
#
f:2:REGISTER_CONVERTIBLE:int:register_convertible:int nr:nr:::generic_register_convertible_not::0
f:2:SKIP_PROLOGUE:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip::0:0
f:2:PROLOGUE_FRAMELESS_P:int:prologue_frameless_p:CORE_ADDR ip:ip::0:generic_prologue_frameless_p::0
f:2:INNER_THAN:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs::0:0
-f:2:BREAKPOINT_FROM_PC:unsigned char *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr:::legacy_breakpoint_from_pc::0
+f:2:BREAKPOINT_FROM_PC:const unsigned char *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr:::legacy_breakpoint_from_pc::0
f:2:MEMORY_INSERT_BREAKPOINT:int:memory_insert_breakpoint:CORE_ADDR addr, char *contents_cache:addr, contents_cache::0:default_memory_insert_breakpoint::0
f:2:MEMORY_REMOVE_BREAKPOINT:int:memory_remove_breakpoint:CORE_ADDR addr, char *contents_cache:addr, contents_cache::0:default_memory_remove_breakpoint::0
v:2:DECR_PC_AFTER_BREAK:CORE_ADDR:decr_pc_after_break::::0:-1
v:2:FRAME_ARGS_SKIP:CORE_ADDR:frame_args_skip::::0:-1
f:2:FRAMELESS_FUNCTION_INVOCATION:int:frameless_function_invocation:struct frame_info *fi:fi:::generic_frameless_function_invocation_not::0
f:2:FRAME_CHAIN:CORE_ADDR:frame_chain:struct frame_info *frame:frame::0:0
-f:1:FRAME_CHAIN_VALID:int:frame_chain_valid:CORE_ADDR chain, struct frame_info *thisframe:chain, thisframe::0:0
+# Define a default FRAME_CHAIN_VALID, in the form that is suitable for
+# most targets. If FRAME_CHAIN_VALID returns zero it means that the
+# given frame is the outermost one and has no caller.
+#
+# XXXX - both default and alternate frame_chain_valid functions are
+# deprecated. New code should use dummy frames and one of the generic
+# functions.
+f:2:FRAME_CHAIN_VALID:int:frame_chain_valid:CORE_ADDR chain, struct frame_info *thisframe:chain, thisframe:::func_frame_chain_valid::0
f:2:FRAME_SAVED_PC:CORE_ADDR:frame_saved_pc:struct frame_info *fi:fi::0:0
f:2:FRAME_ARGS_ADDRESS:CORE_ADDR:frame_args_address:struct frame_info *fi:fi::0:0
f:2:FRAME_LOCALS_ADDRESS:CORE_ADDR:frame_locals_address:struct frame_info *fi:fi::0:0
# trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
# to nonzero if we are current stopped in one of these.
f:2:IN_SOLIB_CALL_TRAMPOLINE:int:in_solib_call_trampoline:CORE_ADDR pc, char *name:pc, name:::generic_in_solib_call_trampoline::0
+# Sigtramp is a routine that the kernel calls (which then calls the
+# signal handler). On most machines it is a library routine that is
+# linked into the executable.
+#
+# This macro, given a program counter value and the name of the
+# function in which that PC resides (which can be null if the name is
+# not known), returns nonzero if the PC and name show that we are in
+# sigtramp.
+#
+# On most machines just see if the name is sigtramp (and if we have
+# no name, assume we are not in sigtramp).
+#
+# FIXME: cagney/2002-04-21: The function find_pc_partial_function
+# calls find_pc_sect_partial_function() which calls PC_IN_SIGTRAMP.
+# This means PC_IN_SIGTRAMP function can't be implemented by doing its
+# own local NAME lookup.
+#
+# FIXME: cagney/2002-04-21: PC_IN_SIGTRAMP is something of a mess.
+# Some code also depends on SIGTRAMP_START and SIGTRAMP_END but other
+# does not.
+f:2:PC_IN_SIGTRAMP:int:pc_in_sigtramp:CORE_ADDR pc, char *name:pc, name:::legacy_pc_in_sigtramp::0
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
# as the first action in a funtion's epilogue. in_function_epilogue_p()
#include "dis-asm.h" /* Get defs for disassemble_info, which unfortunately is a typedef. */
#if !GDB_MULTI_ARCH
+/* Pull in function declarations refered to, indirectly, via macros. */
#include "value.h" /* For default_coerce_float_to_double which is referenced by a macro. */
+#include "inferior.h" /* For unsigned_address_to_pointer(). */
#endif
struct frame_info;
printf "\n"
printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
printf "/* set_gdbarch_${function}() - not applicable - pre-initialized. */\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) && defined (${macro})\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) && defined (${macro})\n"
printf "#error \"Non multi-arch definition of ${macro}\"\n"
printf "#endif\n"
printf "#if GDB_MULTI_ARCH\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (${macro})\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) || !defined (${macro})\n"
printf "#define ${macro} (gdbarch_${function} (current_gdbarch))\n"
printf "#endif\n"
printf "#endif\n"
printf "#endif\n"
printf "\n"
printf "extern int gdbarch_${function}_p (struct gdbarch *gdbarch);\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) && defined (${macro}_P)\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) && defined (${macro}_P)\n"
printf "#error \"Non multi-arch definition of ${macro}\"\n"
printf "#endif\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (${macro}_P)\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) || !defined (${macro}_P)\n"
printf "#define ${macro}_P() (gdbarch_${function}_p (current_gdbarch))\n"
printf "#endif\n"
fi
printf "\n"
printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, ${returntype} ${function});\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) && defined (${macro})\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) && defined (${macro})\n"
printf "#error \"Non multi-arch definition of ${macro}\"\n"
printf "#endif\n"
printf "#if GDB_MULTI_ARCH\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (${macro})\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) || !defined (${macro})\n"
printf "#define ${macro} (gdbarch_${function} (current_gdbarch))\n"
printf "#endif\n"
printf "#endif\n"
printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, gdbarch_${function}_ftype *${function});\n"
if class_is_multiarch_p ; then :
else
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) && defined (${macro})\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) && defined (${macro})\n"
printf "#error \"Non multi-arch definition of ${macro}\"\n"
printf "#endif\n"
printf "#if GDB_MULTI_ARCH\n"
- printf "#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (${macro})\n"
+ printf "#if (GDB_MULTI_ARCH ${gt_level}) || !defined (${macro})\n"
if [ "x${actual}" = "x" ]
then
printf "#define ${macro}() (gdbarch_${function} (current_gdbarch))\n"
architecture; ARCHES which is a list of the previously created
\`\`struct gdbarch'' for this architecture.
- The INIT function parameter INFO shall, as far as possible, be
- pre-initialized with information obtained from INFO.ABFD or
- previously selected architecture (if similar).
+ The INFO parameter is, as far as possible, be pre-initialized with
+ information obtained from INFO.ABFD or the previously selected
+ architecture.
+
+ The ARCHES parameter is a linked list (sorted most recently used)
+ of all the previously created architures for this architecture
+ family. The (possibly NULL) ARCHES->gdbarch can used to access
+ values from the previously selected architecture for this
+ architecture family. The global \`\`current_gdbarch'' shall not be
+ used.
The INIT function shall return any of: NULL - indicating that it
doesn't recognize the selected architecture; an existing \`\`struct
static void swapout_gdbarch_swap (struct gdbarch *);
static void swapin_gdbarch_swap (struct gdbarch *);
-/* Convenience macro for allocting typesafe memory. */
-
-#ifndef XMALLOC
-#define XMALLOC(TYPE) (TYPE*) xmalloc (sizeof (TYPE))
-#endif
-
-
/* Non-zero if we want to trace architecture code. */
#ifndef GDBARCH_DEBUG
initialize_non_multiarch ()
{
alloc_gdbarch_data (&startup_gdbarch);
+ init_gdbarch_swap (&startup_gdbarch);
init_gdbarch_data (&startup_gdbarch);
}
EOF
gdbarch_update_p (struct gdbarch_info info)
{
struct gdbarch *new_gdbarch;
- struct gdbarch_list **list;
struct gdbarch_registration *rego;
/* Fill in missing parts of the INFO struct using a number of
/* Swap all data belonging to the old target out */
swapout_gdbarch_swap (current_gdbarch);
- /* Is this a pre-existing architecture? Yes. Swap it in. */
- for (list = ®o->arches;
- (*list) != NULL;
- list = &(*list)->next)
- {
- if ((*list)->gdbarch == new_gdbarch)
- {
- if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: Previous architecture 0x%08lx (%s) selected\\n",
- (long) new_gdbarch,
- new_gdbarch->bfd_arch_info->printable_name);
- current_gdbarch = new_gdbarch;
- swapin_gdbarch_swap (new_gdbarch);
- architecture_changed_event ();
- return 1;
- }
- }
-
- /* Append this new architecture to this targets list. */
- (*list) = XMALLOC (struct gdbarch_list);
- (*list)->next = NULL;
- (*list)->gdbarch = new_gdbarch;
+ /* Is this a pre-existing architecture? Yes. Move it to the front
+ of the list of architectures (keeping the list sorted Most
+ Recently Used) and then copy it in. */
+ {
+ struct gdbarch_list **list;
+ for (list = ®o->arches;
+ (*list) != NULL;
+ list = &(*list)->next)
+ {
+ if ((*list)->gdbarch == new_gdbarch)
+ {
+ struct gdbarch_list *this;
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "gdbarch_update: Previous architecture 0x%08lx (%s) selected\n",
+ (long) new_gdbarch,
+ new_gdbarch->bfd_arch_info->printable_name);
+ /* Unlink this. */
+ this = (*list);
+ (*list) = this->next;
+ /* Insert in the front. */
+ this->next = rego->arches;
+ rego->arches = this;
+ /* Copy the new architecture in. */
+ current_gdbarch = new_gdbarch;
+ swapin_gdbarch_swap (new_gdbarch);
+ architecture_changed_event ();
+ return 1;
+ }
+ }
+ }
+
+ /* Prepend this new architecture to the architecture list (keep the
+ list sorted Most Recently Used). */
+ {
+ struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
+ this->next = rego->arches;
+ this->gdbarch = new_gdbarch;
+ rego->arches = this;
+ }
/* Switch to this new architecture. Dump it out. */
current_gdbarch = new_gdbarch;