-# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-# 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+# Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+# Free Software Foundation, Inc.
# This file is part of GDB.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
prefix = @prefix@
exec_prefix = @exec_prefix@
includedir = @includedir@
SHELL = /bin/sh
+EXEEXT = @EXEEXT@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
+LDFLAGS = @LDFLAGS@
+INTERNAL_LDFLAGS = $(LDFLAGS) @RDYNAMIC@
# Perhaps should come from parent Makefile
VERSION = gdbserver-4.12.3
# All source files that go into linking GDB remote server.
-SFILES = $(srcdir)/low-hppabsd.c $(srcdir)/low-linux.c $(srcdir)/low-lynx.c \
- $(srcdir)/low-nbsd.c $(srcdir)/low-sim.c $(srcdir)/low-sparc.c \
- $(srcdir)/low-sun3.c $(srcdir)/utils.c $(srcdir)/server.c \
- $(srcdir)/remote-utils.c
+SFILES= $(srcdir)/gdbreplay.c $(srcdir)/inferiors.c \
+ $(srcdir)/mem-break.c $(srcdir)/proc-service.c $(srcdir)/regcache.c \
+ $(srcdir)/remote-utils.c $(srcdir)/server.c $(srcdir)/target.c \
+ $(srcdir)/thread-db.c $(srcdir)/utils.c \
+ $(srcdir)/linux-arm-low.c $(srcdir)/linux-cris-low.c \
+ $(srcdir)/linux-crisv32-low.c $(srcdir)/linux-i386-low.c \
+ $(srcdir)/i387-fp.c \
+ $(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \
+ $(srcdir)/linux-m32r-low.c \
+ $(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \
+ $(srcdir)/linux-ppc-low.c $(srcdir)/linux-ppc64-low.c \
+ $(srcdir)/linux-s390-low.c \
+ $(srcdir)/linux-sh-low.c $(srcdir)/linux-x86-64-low.c
DEPFILES = @GDBSERVER_DEPFILES@
TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
OBS = inferiors.o regcache.o remote-utils.o server.o signals.o target.o \
- utils.o \
+ utils.o version.o \
+ mem-break.o \
+ $(XML_BUILTIN) \
$(DEPFILES)
+GDBSERVER_LIBS = @GDBSERVER_LIBS@
+XM_CLIBS = @LIBS@
+
+# XML files to compile in to gdbserver, if any.
+XML_DIR = $(srcdir)/../features
+XML_TARGET = @srv_xmltarget@
+XML_FILES = @srv_xmlfiles@
+XML_BUILTIN = @srv_xmlbuiltin@
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
install-only:
n=`echo gdbserver | sed '$(program_transform_name)'`; \
if [ x$$n = x ]; then n=gdbserver; else true; fi; \
- $(INSTALL_PROGRAM) gdbserver $(bindir)/$$n; \
- $(INSTALL_DATA) $(srcdir)/gdbserver.1 $(man1dir)/$$n.1
+ $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir); \
+ $(INSTALL_PROGRAM) gdbserver $(DESTDIR)$(bindir)/$$n; \
+ $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(man1dir); \
+ $(INSTALL_DATA) $(srcdir)/gdbserver.1 $(DESTDIR)$(man1dir)/$$n.1
uninstall: force
n=`echo gdbserver | sed '$(program_transform_name)'`; \
if [ x$$n = x ]; then n=gdbserver; else true; fi; \
- rm -f $(bindir)/$$n $(man1dir)/$$n.1
+ rm -f $(bindir)/$$n $(DESTDIR)$(man1dir)/$$n.1
installcheck:
check:
gdbserver: $(OBS) ${ADD_DEPS} ${CDEPS}
rm -f gdbserver
- ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbserver $(OBS) \
+ ${CC-LD} $(INTERNAL_CFLAGS) $(INTERNAL_LDFLAGS) -o gdbserver $(OBS) \
$(GDBSERVER_LIBS) $(XM_CLIBS)
gdbreplay: gdbreplay.o
rm -f gdbreplay
- ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbreplay gdbreplay.o \
+ ${CC-LD} $(INTERNAL_CFLAGS) $(INTERNAL_LDFLAGS) -o gdbreplay gdbreplay.o \
$(XM_CLIBS)
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine.
# The xyzzy stuff below deals with empty DEPFILES
TAGS: ${TAGFILES}
- etags `find ${srcdir}/../config -name $(TM_FILE) -print` \
+ etags `find ${srcdir}/../config -name $(DEPRECATED_TM_FILE) -print` \
`find ${srcdir}/../config -name ${XM_FILE} -print` \
`find ${srcdir}/../config -name ${NAT_FILE} -print` \
`for i in yzzy ${DEPFILES}; do \
clean:
rm -f *.o ${ADD_FILES} *~
- rm -f gdbserver gdbreplay core make.log
- rm -f reg-arm.c reg-i386.c reg-ia64.c reg-m68k.c reg-mips.c
- rm -f reg-ppc.c reg-sh.c reg-x86-64.c reg-i386-linux.c
-
-distclean: clean
- rm -f nm.h tm.h xm.h config.status
+ rm -f version.c
+ rm -f gdbserver$(EXEEXT) gdbreplay$(EXEEXT) core make.log
+ rm -f reg-arm.c reg-i386.c reg-ia64.c reg-m32r.c reg-m68k.c reg-mips.c
+ rm -f reg-ppc.c reg-sh.c reg-spu.c reg-x86-64.c reg-i386-linux.c
+ rm -f reg-cris.c reg-crisv32.c reg-x86-64-linux.c reg-mips64.c
+ rm -f arm-with-iwmmxt.c
+ rm -f xml-builtin.c stamp-xml target.xml
+
+maintainer-clean realclean distclean: clean
+ rm -f nm.h tm.h xm.h config.status config.h stamp-h config.log
rm -f Makefile
-maintainer-clean realclean: clean
- rm -f nm.h tm.h xm.h config.status
- rm -f Makefile
-
-STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
-
-config.h: config.in config.status
- CONFIG_FILES="" $(SHELL) ./config.status
+config.h: stamp-h ; @true
+stamp-h: config.in config.status
+ CONFIG_FILES="" CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
Makefile: Makefile.in config.status
CONFIG_HEADERS="" $(SHELL) ./config.status
force:
-version.c: Makefile
- echo 'char *version = "$(VERSION)";' >version.c
+version.c: Makefile $(srcdir)/../version.in
+ rm -f version.c-tmp version.c
+ echo '#include "server.h"' >> version.c-tmp
+ echo 'const char version[] = "'"`sed q ${srcdir}/../version.in`"'";' >> version.c-tmp
+ echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
+ mv version.c-tmp version.c
+version.o: version.c $(server_h)
+
+target.xml: $(XML_TARGET)
+ rm -f target.xml
+ cp $(XML_TARGET) target.xml
+
+xml-builtin.c: stamp-xml; @true
+stamp-xml: $(XML_DIR)/feature_to_c.sh Makefile $(XML_FILES)
+ rm -f xml-builtin.tmp
+ $(SHELL) $(XML_DIR)/feature_to_c.sh xml-builtin.tmp $(XML_FILES)
+ $(SHELL) $(srcdir)/../../move-if-change xml-builtin.tmp xml-builtin.c
+ echo stamp > stamp-xml
+
+.PRECIOUS: target.xml xml-builtin.c
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# will remove them.
MAKEOVERRIDES=
-## This is ugly, but I don't want GNU make to put these variables in
-## the environment. Older makes will see this as a set of targets
-## with no dependencies and no actions.
-unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
-
+gdb_proc_service_h = $(srcdir)/gdb_proc_service.h
regdat_sh = $(srcdir)/../regformats/regdat.sh
regdef_h = $(srcdir)/../regformats/regdef.h
regcache_h = $(srcdir)/regcache.h
-server_h = $(srcdir)/server.h $(regcache_h) config.h $(srcdir)/target.h
+server_h = $(srcdir)/server.h $(regcache_h) config.h $(srcdir)/target.h \
+ $(srcdir)/mem-break.h
inferiors.o: inferiors.c $(server_h)
+mem-break.o: mem-break.c $(server_h)
+proc-service.o: proc-service.c $(server_h) $(gdb_proc_service_h)
regcache.o: regcache.c $(server_h) $(regdef_h)
remote-utils.o: remote-utils.c terminal.h $(server_h)
server.o: server.c $(server_h)
target.o: target.c $(server_h)
+thread-db.o: thread-db.c $(server_h) $(gdb_proc_service_h)
utils.o: utils.c $(server_h)
signals.o: ../signals/signals.c $(server_h)
linux_low_h = $(srcdir)/linux-low.h
linux-low.o: linux-low.c $(linux_low_h) $(server_h)
-linux-arm-low.o: linux-arm-low.c $(linux_low_h) $(server_h)
-linux-i386-low.o: linux-i386-low.c $(linux_low_h) $(server_h)
+ $(CC) -c $(CPPFLAGS) $(INTERNAL_CFLAGS) $< @USE_THREAD_DB@
+
+linux-arm-low.o: linux-arm-low.c $(linux_low_h) $(server_h) \
+ $(gdb_proc_service_h)
+linux-cris-low.o: linux-cris-low.c $(linux_low_h) $(server_h)
+linux-crisv32-low.o: linux-crisv32-low.c $(linux_low_h) $(server_h)
+linux-i386-low.o: linux-i386-low.c $(linux_low_h) $(server_h) \
+ $(gdb_proc_service_h)
linux-ia64-low.o: linux-ia64-low.c $(linux_low_h) $(server_h)
-linux-mips-low.o: linux-mips-low.c $(linux_low_h) $(server_h)
+linux-m32r-low.o: linux-m32r-low.c $(linux_low_h) $(server_h)
+linux-mips-low.o: linux-mips-low.c $(linux_low_h) $(server_h) \
+ $(gdb_proc_service_h)
linux-ppc-low.o: linux-ppc-low.c $(linux_low_h) $(server_h)
+linux-ppc64-low.o: linux-ppc64-low.c $(linux_low_h) $(server_h)
linux-s390-low.o: linux-s390-low.c $(linux_low_h) $(server_h)
linux-sh-low.o: linux-sh-low.c $(linux_low_h) $(server_h)
-linux-x86-64-low.o: linux-x86-64-low.c $(linux_low_h) $(server_h)
+linux-x86-64-low.o: linux-x86-64-low.c $(linux_low_h) $(server_h) \
+ $(gdb_proc_service_h)
+
+win32-i386-low.o: win32-i386-low.c $(server_h) $(regdef_h) $(regcache_h)
-# OBSOLETE TARGETS
-# OBSOLETE # low-lynx.o : ${srcdir}/low-lynx.c ${srcdir}/server.h
-# OBSOLETE # low-nbsd.o : ${srcdir}/low-nbsd.c ${srcdir}/server.h
-# OBSOLETE # low-sim.o : ${srcdir}/low-sim.c ${srcdir}/server.h
-# OBSOLETE # low-sparc.o : $(srcdir)/low-sparc.c $(srcdir)/server.h
-# OBSOLETE # low-sun3.o : $(srcdir)/low-sun3.c $(srcdir)/server.h
-# OBSOLETE # low-hppabsd.o : $(srcdir)/low-hppabsd.c $(srcdir)/server.h
+spu-low.o: spu-low.c $(server_h)
reg-arm.o : reg-arm.c $(regdef_h)
reg-arm.c : $(srcdir)/../regformats/reg-arm.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-arm.dat reg-arm.c
+arm-with-iwmmxt.o : arm-with-iwmmxt.c $(regdef_h)
+arm-with-iwmmxt.c : $(srcdir)/../regformats/arm-with-iwmmxt.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/arm-with-iwmmxt.dat arm-with-iwmmxt.c
+reg-cris.o : reg-cris.c $(regdef_h)
+reg-cris.c : $(srcdir)/../regformats/reg-cris.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-cris.dat reg-cris.c
+reg-crisv32.o : reg-crisv32.c $(regdef_h)
+reg-crisv32.c : $(srcdir)/../regformats/reg-crisv32.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-crisv32.dat reg-crisv32.c
reg-i386.o : reg-i386.c $(regdef_h)
reg-i386.c : $(srcdir)/../regformats/reg-i386.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-i386.dat reg-i386.c
reg-ia64.o : reg-ia64.c $(regdef_h)
reg-ia64.c : $(srcdir)/../regformats/reg-ia64.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-ia64.dat reg-ia64.c
+reg-m32r.o : reg-m32r.c $(regdef_h)
+reg-m32r.c : $(srcdir)/../regformats/reg-m32r.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-m32r.dat reg-m32r.c
reg-m68k.o : reg-m68k.c $(regdef_h)
reg-m68k.c : $(srcdir)/../regformats/reg-m68k.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-m68k.dat reg-m68k.c
reg-mips.o : reg-mips.c $(regdef_h)
reg-mips.c : $(srcdir)/../regformats/reg-mips.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-mips.dat reg-mips.c
+reg-mips64.o : reg-mips64.c $(regdef_h)
+reg-mips64.c : $(srcdir)/../regformats/reg-mips64.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-mips64.dat reg-mips64.c
reg-ppc.o : reg-ppc.c $(regdef_h)
reg-ppc.c : $(srcdir)/../regformats/reg-ppc.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-ppc.dat reg-ppc.c
+reg-ppc64.o : reg-ppc64.c $(regdef_h)
+reg-ppc64.c : $(srcdir)/../regformats/reg-ppc64.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-ppc64.dat reg-ppc64.c
reg-s390.o : reg-s390.c $(regdef_h)
reg-s390.c : $(srcdir)/../regformats/reg-s390.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-s390.dat reg-s390.c
reg-sh.o : reg-sh.c $(regdef_h)
reg-sh.c : $(srcdir)/../regformats/reg-sh.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-sh.dat reg-sh.c
+reg-spu.o : reg-spu.c $(regdef_h)
+reg-spu.c : $(srcdir)/../regformats/reg-spu.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-spu.dat reg-spu.c
reg-x86-64.o : reg-x86-64.c $(regdef_h)
reg-x86-64.c : $(srcdir)/../regformats/reg-x86-64.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-x86-64.dat reg-x86-64.c
+reg-x86-64-linux.o : reg-x86-64-linux.c $(regdef_h)
+reg-x86-64-linux.c : $(srcdir)/../regformats/reg-x86-64-linux.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-x86-64-linux.dat reg-x86-64-linux.c
# This is the end of "Makefile.in".