Arch-specific remote follow fork
[deliverable/binutils-gdb.git] / gdb / gdbserver / linux-arm-low.c
index f873b071a812c8e73b0d425312c8ef5b13d0b1e0..3420dea73ac8c9d6a49a0cdeb38d59386bb6dddc 100644 (file)
@@ -1,12 +1,11 @@
 /* GNU/Linux/ARM specific low level interface, for the remote server for GDB.
-   Copyright 1995, 1996, 1998, 1999, 2000, 2001, 2002
-   Free Software Foundation, Inc.
+   Copyright (C) 1995-2015 Free Software Foundation, Inc.
 
    This file is part of GDB.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
+   the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.
 
    This program is distributed in the hope that it will be useful,
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 #include "server.h"
 #include "linux-low.h"
 
+/* Don't include elf.h if linux/elf.h got included by gdb_proc_service.h.
+   On Bionic elf.h and linux/elf.h have conflicting definitions.  */
+#ifndef ELFMAG0
+#include <elf.h>
+#endif
+#include <sys/ptrace.h>
+#include <signal.h>
+
+/* Defined in auto-generated files.  */
+void init_registers_arm (void);
+extern const struct target_desc *tdesc_arm;
+
+void init_registers_arm_with_iwmmxt (void);
+extern const struct target_desc *tdesc_arm_with_iwmmxt;
+
+void init_registers_arm_with_vfpv2 (void);
+extern const struct target_desc *tdesc_arm_with_vfpv2;
+
+void init_registers_arm_with_vfpv3 (void);
+extern const struct target_desc *tdesc_arm_with_vfpv3;
+
+void init_registers_arm_with_neon (void);
+extern const struct target_desc *tdesc_arm_with_neon;
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 22
+#endif
+
+#ifndef PTRACE_GETWMMXREGS
+# define PTRACE_GETWMMXREGS 18
+# define PTRACE_SETWMMXREGS 19
+#endif
+
+#ifndef PTRACE_GETVFPREGS
+# define PTRACE_GETVFPREGS 27
+# define PTRACE_SETVFPREGS 28
+#endif
+
+#ifndef PTRACE_GETHBPREGS
+#define PTRACE_GETHBPREGS 29
+#define PTRACE_SETHBPREGS 30
+#endif
+
+/* Information describing the hardware breakpoint capabilities.  */
+static struct
+{
+  unsigned char arch;
+  unsigned char max_wp_length;
+  unsigned char wp_count;
+  unsigned char bp_count;
+} arm_linux_hwbp_cap;
+
+/* Enum describing the different types of ARM hardware break-/watch-points.  */
+typedef enum
+{
+  arm_hwbp_break = 0,
+  arm_hwbp_load = 1,
+  arm_hwbp_store = 2,
+  arm_hwbp_access = 3
+} arm_hwbp_type;
+
+/* Type describing an ARM Hardware Breakpoint Control register value.  */
+typedef unsigned int arm_hwbp_control_t;
+
+/* Structure used to keep track of hardware break-/watch-points.  */
+struct arm_linux_hw_breakpoint
+{
+  /* Address to break on, or being watched.  */
+  unsigned int address;
+  /* Control register for break-/watch- point.  */
+  arm_hwbp_control_t control;
+};
+
+/* Since we cannot dynamically allocate subfields of arch_process_info,
+   assume a maximum number of supported break-/watchpoints.  */
+#define MAX_BPTS 32
+#define MAX_WPTS 32
+
+/* Per-process arch-specific data we want to keep.  */
+struct arch_process_info
+{
+  /* Hardware breakpoints for this process.  */
+  struct arm_linux_hw_breakpoint bpts[MAX_BPTS];
+  /* Hardware watchpoints for this process.  */
+  struct arm_linux_hw_breakpoint wpts[MAX_WPTS];
+};
+
+/* Per-thread arch-specific data we want to keep.  */
+struct arch_lwp_info
+{
+  /* Non-zero if our copy differs from what's recorded in the thread.  */
+  char bpts_changed[MAX_BPTS];
+  char wpts_changed[MAX_WPTS];
+  /* Cached stopped data address.  */
+  CORE_ADDR stopped_data_address;
+};
+
+static unsigned long arm_hwcap;
+
+/* These are in <asm/elf.h> in current kernels.  */
+#define HWCAP_VFP       64
+#define HWCAP_IWMMXT    512
+#define HWCAP_NEON      4096
+#define HWCAP_VFPv3     8192
+#define HWCAP_VFPv3D16  16384
+
 #ifdef HAVE_SYS_REG_H
 #include <sys/reg.h>
 #endif
 
-int num_regs = 16;
+#define arm_num_regs 26
 
-int regmap[] = {
+static int arm_regmap[] = {
   0, 4, 8, 12, 16, 20, 24, 28,
   32, 36, 40, 44, 48, 52, 56, 60,
+  -1, -1, -1, -1, -1, -1, -1, -1, -1,
+  64
 };
 
-int
-cannot_store_register (int regno)
+static int
+arm_cannot_store_register (int regno)
+{
+  return (regno >= arm_num_regs);
+}
+
+static int
+arm_cannot_fetch_register (int regno)
+{
+  return (regno >= arm_num_regs);
+}
+
+static void
+arm_fill_gregset (struct regcache *regcache, void *buf)
+{
+  int i;
+
+  for (i = 0; i < arm_num_regs; i++)
+    if (arm_regmap[i] != -1)
+      collect_register (regcache, i, ((char *) buf) + arm_regmap[i]);
+}
+
+static void
+arm_store_gregset (struct regcache *regcache, const void *buf)
+{
+  int i;
+  char zerobuf[8];
+
+  memset (zerobuf, 0, 8);
+  for (i = 0; i < arm_num_regs; i++)
+    if (arm_regmap[i] != -1)
+      supply_register (regcache, i, ((char *) buf) + arm_regmap[i]);
+    else
+      supply_register (regcache, i, zerobuf);
+}
+
+static void
+arm_fill_wmmxregset (struct regcache *regcache, void *buf)
+{
+  int i;
+
+  if (!(arm_hwcap & HWCAP_IWMMXT))
+    return;
+
+  for (i = 0; i < 16; i++)
+    collect_register (regcache, arm_num_regs + i, (char *) buf + i * 8);
+
+  /* We only have access to wcssf, wcasf, and wcgr0-wcgr3.  */
+  for (i = 0; i < 6; i++)
+    collect_register (regcache, arm_num_regs + i + 16,
+                     (char *) buf + 16 * 8 + i * 4);
+}
+
+static void
+arm_store_wmmxregset (struct regcache *regcache, const void *buf)
+{
+  int i;
+
+  if (!(arm_hwcap & HWCAP_IWMMXT))
+    return;
+
+  for (i = 0; i < 16; i++)
+    supply_register (regcache, arm_num_regs + i, (char *) buf + i * 8);
+
+  /* We only have access to wcssf, wcasf, and wcgr0-wcgr3.  */
+  for (i = 0; i < 6; i++)
+    supply_register (regcache, arm_num_regs + i + 16,
+                    (char *) buf + 16 * 8 + i * 4);
+}
+
+static void
+arm_fill_vfpregset (struct regcache *regcache, void *buf)
+{
+  int i, num, base;
+
+  if (!(arm_hwcap & HWCAP_VFP))
+    return;
+
+  if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
+    num = 32;
+  else
+    num = 16;
+
+  base = find_regno (regcache->tdesc, "d0");
+  for (i = 0; i < num; i++)
+    collect_register (regcache, base + i, (char *) buf + i * 8);
+
+  collect_register_by_name (regcache, "fpscr", (char *) buf + 32 * 8);
+}
+
+static void
+arm_store_vfpregset (struct regcache *regcache, const void *buf)
+{
+  int i, num, base;
+
+  if (!(arm_hwcap & HWCAP_VFP))
+    return;
+
+  if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
+    num = 32;
+  else
+    num = 16;
+
+  base = find_regno (regcache->tdesc, "d0");
+  for (i = 0; i < num; i++)
+    supply_register (regcache, base + i, (char *) buf + i * 8);
+
+  supply_register_by_name (regcache, "fpscr", (char *) buf + 32 * 8);
+}
+
+extern int debug_threads;
+
+static CORE_ADDR
+arm_get_pc (struct regcache *regcache)
 {
-  return (regno >= num_regs);
+  unsigned long pc;
+  collect_register_by_name (regcache, "pc", &pc);
+  if (debug_threads)
+    debug_printf ("stop pc is %08lx\n", pc);
+  return pc;
 }
 
-int
-cannot_fetch_register (int regno)
+static void
+arm_set_pc (struct regcache *regcache, CORE_ADDR pc)
 {
-  return (regno >= num_regs);
+  unsigned long newpc = pc;
+  supply_register_by_name (regcache, "pc", &newpc);
 }
 
+/* Correct in either endianness.  */
+static const unsigned long arm_breakpoint = 0xef9f0001;
+#define arm_breakpoint_len 4
+static const unsigned short thumb_breakpoint = 0xde01;
+static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
+
+/* For new EABI binaries.  We recognize it regardless of which ABI
+   is used for gdbserver, so single threaded debugging should work
+   OK, but for multi-threaded debugging we only insert the current
+   ABI's breakpoint instruction.  For now at least.  */
+static const unsigned long arm_eabi_breakpoint = 0xe7f001f0;
+
+static int
+arm_breakpoint_at (CORE_ADDR where)
+{
+  struct regcache *regcache = get_thread_regcache (current_thread, 1);
+  unsigned long cpsr;
+
+  collect_register_by_name (regcache, "cpsr", &cpsr);
+
+  if (cpsr & 0x20)
+    {
+      /* Thumb mode.  */
+      unsigned short insn;
+
+      (*the_target->read_memory) (where, (unsigned char *) &insn, 2);
+      if (insn == thumb_breakpoint)
+       return 1;
+
+      if (insn == thumb2_breakpoint[0])
+       {
+         (*the_target->read_memory) (where + 2, (unsigned char *) &insn, 2);
+         if (insn == thumb2_breakpoint[1])
+           return 1;
+       }
+    }
+  else
+    {
+      /* ARM mode.  */
+      unsigned long insn;
+
+      (*the_target->read_memory) (where, (unsigned char *) &insn, 4);
+      if (insn == arm_breakpoint)
+       return 1;
+
+      if (insn == arm_eabi_breakpoint)
+       return 1;
+    }
+
+  return 0;
+}
+
+/* We only place breakpoints in empty marker functions, and thread locking
+   is outside of the function.  So rather than importing software single-step,
+   we can just run until exit.  */
+static CORE_ADDR
+arm_reinsert_addr (void)
+{
+  struct regcache *regcache = get_thread_regcache (current_thread, 1);
+  unsigned long pc;
+  collect_register_by_name (regcache, "lr", &pc);
+  return pc;
+}
+
+/* Fetch the thread-local storage pointer for libthread_db.  */
+
+ps_err_e
+ps_get_thread_area (const struct ps_prochandle *ph,
+                   lwpid_t lwpid, int idx, void **base)
+{
+  if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0)
+    return PS_ERR;
+
+  /* IDX is the bias from the thread pointer to the beginning of the
+     thread descriptor.  It has to be subtracted due to implementation
+     quirks in libthread_db.  */
+  *base = (void *) ((char *)*base - idx);
+
+  return PS_OK;
+}
+
+
+/* Query Hardware Breakpoint information for the target we are attached to
+   (using PID as ptrace argument) and set up arm_linux_hwbp_cap.  */
+static void
+arm_linux_init_hwbp_cap (int pid)
+{
+  unsigned int val;
+
+  if (ptrace (PTRACE_GETHBPREGS, pid, 0, &val) < 0)
+    return;
+
+  arm_linux_hwbp_cap.arch = (unsigned char)((val >> 24) & 0xff);
+  if (arm_linux_hwbp_cap.arch == 0)
+    return;
+
+  arm_linux_hwbp_cap.max_wp_length = (unsigned char)((val >> 16) & 0xff);
+  arm_linux_hwbp_cap.wp_count = (unsigned char)((val >> 8) & 0xff);
+  arm_linux_hwbp_cap.bp_count = (unsigned char)(val & 0xff);
+
+  if (arm_linux_hwbp_cap.wp_count > MAX_WPTS)
+    internal_error (__FILE__, __LINE__, "Unsupported number of watchpoints");
+  if (arm_linux_hwbp_cap.bp_count > MAX_BPTS)
+    internal_error (__FILE__, __LINE__, "Unsupported number of breakpoints");
+}
+
+/* How many hardware breakpoints are available?  */
+static int
+arm_linux_get_hw_breakpoint_count (void)
+{
+  return arm_linux_hwbp_cap.bp_count;
+}
+
+/* How many hardware watchpoints are available?  */
+static int
+arm_linux_get_hw_watchpoint_count (void)
+{
+  return arm_linux_hwbp_cap.wp_count;
+}
+
+/* Maximum length of area watched by hardware watchpoint.  */
+static int
+arm_linux_get_hw_watchpoint_max_length (void)
+{
+  return arm_linux_hwbp_cap.max_wp_length;
+}
+
+/* Initialize an ARM hardware break-/watch-point control register value.
+   BYTE_ADDRESS_SELECT is the mask of bytes to trigger on; HWBP_TYPE is the
+   type of break-/watch-point; ENABLE indicates whether the point is enabled.
+   */
+static arm_hwbp_control_t
+arm_hwbp_control_initialize (unsigned byte_address_select,
+                            arm_hwbp_type hwbp_type,
+                            int enable)
+{
+  gdb_assert ((byte_address_select & ~0xffU) == 0);
+  gdb_assert (hwbp_type != arm_hwbp_break
+             || ((byte_address_select & 0xfU) != 0));
+
+  return (byte_address_select << 5) | (hwbp_type << 3) | (3 << 1) | enable;
+}
+
+/* Does the breakpoint control value CONTROL have the enable bit set?  */
+static int
+arm_hwbp_control_is_enabled (arm_hwbp_control_t control)
+{
+  return control & 0x1;
+}
+
+/* Is the breakpoint control value CONTROL initialized?  */
+static int
+arm_hwbp_control_is_initialized (arm_hwbp_control_t control)
+{
+  return control != 0;
+}
+
+/* Change a breakpoint control word so that it is in the disabled state.  */
+static arm_hwbp_control_t
+arm_hwbp_control_disable (arm_hwbp_control_t control)
+{
+  return control & ~0x1;
+}
+
+/* Are two break-/watch-points equal?  */
+static int
+arm_linux_hw_breakpoint_equal (const struct arm_linux_hw_breakpoint *p1,
+                              const struct arm_linux_hw_breakpoint *p2)
+{
+  return p1->address == p2->address && p1->control == p2->control;
+}
+
+/* Convert a raw breakpoint type to an enum arm_hwbp_type.  */
+
+static int
+raw_bkpt_type_to_arm_hwbp_type (enum raw_bkpt_type raw_type)
+{
+  switch (raw_type)
+    {
+    case raw_bkpt_type_hw:
+      return arm_hwbp_break;
+    case raw_bkpt_type_write_wp:
+      return arm_hwbp_store;
+    case raw_bkpt_type_read_wp:
+      return arm_hwbp_load;
+    case raw_bkpt_type_access_wp:
+      return arm_hwbp_access;
+    default:
+      gdb_assert_not_reached ("unhandled raw type");
+    }
+}
+
+/* Initialize the hardware breakpoint structure P for a breakpoint or
+   watchpoint at ADDR to LEN.  The type of watchpoint is given in TYPE.
+   Returns -1 if TYPE is unsupported, or -2 if the particular combination
+   of ADDR and LEN cannot be implemented.  Otherwise, returns 0 if TYPE
+   represents a breakpoint and 1 if type represents a watchpoint.  */
+static int
+arm_linux_hw_point_initialize (enum raw_bkpt_type raw_type, CORE_ADDR addr,
+                              int len, struct arm_linux_hw_breakpoint *p)
+{
+  arm_hwbp_type hwbp_type;
+  unsigned mask;
+
+  hwbp_type = raw_bkpt_type_to_arm_hwbp_type (raw_type);
+
+  if (hwbp_type == arm_hwbp_break)
+    {
+      /* For breakpoints, the length field encodes the mode.  */
+      switch (len)
+       {
+       case 2:  /* 16-bit Thumb mode breakpoint */
+       case 3:  /* 32-bit Thumb mode breakpoint */
+         mask = 0x3;
+         addr &= ~1;
+         break;
+       case 4:  /* 32-bit ARM mode breakpoint */
+         mask = 0xf;
+         addr &= ~3;
+         break;
+       default:
+         /* Unsupported. */
+         return -2;
+       }
+    }
+  else
+    {
+      CORE_ADDR max_wp_length = arm_linux_get_hw_watchpoint_max_length ();
+      CORE_ADDR aligned_addr;
+
+      /* Can not set watchpoints for zero or negative lengths.  */
+      if (len <= 0)
+       return -2;
+      /* The current ptrace interface can only handle watchpoints that are a
+        power of 2.  */
+      if ((len & (len - 1)) != 0)
+       return -2;
+
+      /* Test that the range [ADDR, ADDR + LEN) fits into the largest address
+        range covered by a watchpoint.  */
+      aligned_addr = addr & ~(max_wp_length - 1);
+      if (aligned_addr + max_wp_length < addr + len)
+       return -2;
+
+      mask = (1 << len) - 1;
+    }
+
+  p->address = (unsigned int) addr;
+  p->control = arm_hwbp_control_initialize (mask, hwbp_type, 1);
+
+  return hwbp_type != arm_hwbp_break;
+}
+
+/* Callback to mark a watch-/breakpoint to be updated in all threads of
+   the current process.  */
+
+struct update_registers_data
+{
+  int watch;
+  int i;
+};
+
+static int
+update_registers_callback (struct inferior_list_entry *entry, void *arg)
+{
+  struct thread_info *thread = (struct thread_info *) entry;
+  struct lwp_info *lwp = get_thread_lwp (thread);
+  struct update_registers_data *data = (struct update_registers_data *) arg;
+
+  /* Only update the threads of the current process.  */
+  if (pid_of (thread) == pid_of (current_thread))
+    {
+      /* The actual update is done later just before resuming the lwp,
+         we just mark that the registers need updating.  */
+      if (data->watch)
+       lwp->arch_private->wpts_changed[data->i] = 1;
+      else
+       lwp->arch_private->bpts_changed[data->i] = 1;
+
+      /* If the lwp isn't stopped, force it to momentarily pause, so
+         we can update its breakpoint registers.  */
+      if (!lwp->stopped)
+        linux_stop_lwp (lwp);
+    }
+
+  return 0;
+}
+
+static int
+arm_supports_z_point_type (char z_type)
+{
+  switch (z_type)
+    {
+    case Z_PACKET_HW_BP:
+    case Z_PACKET_WRITE_WP:
+    case Z_PACKET_READ_WP:
+    case Z_PACKET_ACCESS_WP:
+      return 1;
+    default:
+      /* Leave the handling of sw breakpoints with the gdb client.  */
+      return 0;
+    }
+}
+
+/* Insert hardware break-/watchpoint.  */
+static int
+arm_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
+                 int len, struct raw_breakpoint *bp)
+{
+  struct process_info *proc = current_process ();
+  struct arm_linux_hw_breakpoint p, *pts;
+  int watch, i, count;
+
+  watch = arm_linux_hw_point_initialize (type, addr, len, &p);
+  if (watch < 0)
+    {
+      /* Unsupported.  */
+      return watch == -1 ? 1 : -1;
+    }
+
+  if (watch)
+    {
+      count = arm_linux_get_hw_watchpoint_count ();
+      pts = proc->priv->arch_private->wpts;
+    }
+  else
+    {
+      count = arm_linux_get_hw_breakpoint_count ();
+      pts = proc->priv->arch_private->bpts;
+    }
+
+  for (i = 0; i < count; i++)
+    if (!arm_hwbp_control_is_enabled (pts[i].control))
+      {
+       struct update_registers_data data = { watch, i };
+       pts[i] = p;
+       find_inferior (&all_threads, update_registers_callback, &data);
+       return 0;
+      }
+
+  /* We're out of watchpoints.  */
+  return -1;
+}
+
+/* Remove hardware break-/watchpoint.  */
+static int
+arm_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
+                 int len, struct raw_breakpoint *bp)
+{
+  struct process_info *proc = current_process ();
+  struct arm_linux_hw_breakpoint p, *pts;
+  int watch, i, count;
+
+  watch = arm_linux_hw_point_initialize (type, addr, len, &p);
+  if (watch < 0)
+    {
+      /* Unsupported.  */
+      return -1;
+    }
+
+  if (watch)
+    {
+      count = arm_linux_get_hw_watchpoint_count ();
+      pts = proc->priv->arch_private->wpts;
+    }
+  else
+    {
+      count = arm_linux_get_hw_breakpoint_count ();
+      pts = proc->priv->arch_private->bpts;
+    }
+
+  for (i = 0; i < count; i++)
+    if (arm_linux_hw_breakpoint_equal (&p, pts + i))
+      {
+       struct update_registers_data data = { watch, i };
+       pts[i].control = arm_hwbp_control_disable (pts[i].control);
+       find_inferior (&all_threads, update_registers_callback, &data);
+       return 0;
+      }
+
+  /* No watchpoint matched.  */
+  return -1;
+}
+
+/* Return whether current thread is stopped due to a watchpoint.  */
+static int
+arm_stopped_by_watchpoint (void)
+{
+  struct lwp_info *lwp = get_thread_lwp (current_thread);
+  siginfo_t siginfo;
+
+  /* We must be able to set hardware watchpoints.  */
+  if (arm_linux_get_hw_watchpoint_count () == 0)
+    return 0;
+
+  /* Retrieve siginfo.  */
+  errno = 0;
+  ptrace (PTRACE_GETSIGINFO, lwpid_of (current_thread), 0, &siginfo);
+  if (errno != 0)
+    return 0;
+
+  /* This must be a hardware breakpoint.  */
+  if (siginfo.si_signo != SIGTRAP
+      || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */)
+    return 0;
+
+  /* If we are in a positive slot then we're looking at a breakpoint and not
+     a watchpoint.  */
+  if (siginfo.si_errno >= 0)
+    return 0;
+
+  /* Cache stopped data address for use by arm_stopped_data_address.  */
+  lwp->arch_private->stopped_data_address
+    = (CORE_ADDR) (uintptr_t) siginfo.si_addr;
+
+  return 1;
+}
+
+/* Return data address that triggered watchpoint.  Called only if
+   arm_stopped_by_watchpoint returned true.  */
+static CORE_ADDR
+arm_stopped_data_address (void)
+{
+  struct lwp_info *lwp = get_thread_lwp (current_thread);
+  return lwp->arch_private->stopped_data_address;
+}
+
+/* Called when a new process is created.  */
+static struct arch_process_info *
+arm_new_process (void)
+{
+  struct arch_process_info *info = xcalloc (1, sizeof (*info));
+  return info;
+}
+
+/* Called when a new thread is detected.  */
+static void
+arm_new_thread (struct lwp_info *lwp)
+{
+  struct arch_lwp_info *info = xcalloc (1, sizeof (*info));
+  int i;
+
+  for (i = 0; i < MAX_BPTS; i++)
+    info->bpts_changed[i] = 1;
+  for (i = 0; i < MAX_WPTS; i++)
+    info->wpts_changed[i] = 1;
+
+  lwp->arch_private = info;
+}
+
+static void
+arm_new_fork (struct process_info *parent, struct process_info *child)
+{
+  struct arch_process_info *parent_proc_info = parent->private->arch_private;
+  struct arch_process_info *child_proc_info = child->private->arch_private;
+  struct lwp_info *child_lwp;
+  struct arch_lwp_info *child_lwp_info;
+  int i;
+
+  /* These are allocated by linux_add_process.  */
+  gdb_assert (parent->private != NULL
+             && parent->private->arch_private != NULL);
+  gdb_assert (child->private != NULL
+             && child->private->arch_private != NULL);
+
+  /* Linux kernel before 2.6.33 commit
+     72f674d203cd230426437cdcf7dd6f681dad8b0d
+     will inherit hardware debug registers from parent
+     on fork/vfork/clone.  Newer Linux kernels create such tasks with
+     zeroed debug registers.
+
+     GDB core assumes the child inherits the watchpoints/hw
+     breakpoints of the parent, and will remove them all from the
+     forked off process.  Copy the debug registers mirrors into the
+     new process so that all breakpoints and watchpoints can be
+     removed together.  The debug registers mirror will become zeroed
+     in the end before detaching the forked off process, thus making
+     this compatible with older Linux kernels too.  */
+
+  *child_proc_info = *parent_proc_info;
+
+  /* Mark all the hardware breakpoints and watchpoints as changed to
+     make sure that the registers will be updated.  */
+  child_lwp = find_lwp_pid (ptid_of (child));
+  child_lwp_info = child_lwp->arch_private;
+  for (i = 0; i < MAX_BPTS; i++)
+    child_lwp_info->bpts_changed[i] = 1;
+  for (i = 0; i < MAX_WPTS; i++)
+    child_lwp_info->wpts_changed[i] = 1;
+}
+
+/* Called when resuming a thread.
+   If the debug regs have changed, update the thread's copies.  */
+static void
+arm_prepare_to_resume (struct lwp_info *lwp)
+{
+  struct thread_info *thread = get_lwp_thread (lwp);
+  int pid = lwpid_of (thread);
+  struct process_info *proc = find_process_pid (pid_of (thread));
+  struct arch_process_info *proc_info = proc->priv->arch_private;
+  struct arch_lwp_info *lwp_info = lwp->arch_private;
+  int i;
+
+  for (i = 0; i < arm_linux_get_hw_breakpoint_count (); i++)
+    if (lwp_info->bpts_changed[i])
+      {
+       errno = 0;
+
+       if (arm_hwbp_control_is_enabled (proc_info->bpts[i].control))
+         if (ptrace (PTRACE_SETHBPREGS, pid,
+                     (PTRACE_TYPE_ARG3) ((i << 1) + 1),
+                     &proc_info->bpts[i].address) < 0)
+           perror_with_name ("Unexpected error setting breakpoint address");
+
+       if (arm_hwbp_control_is_initialized (proc_info->bpts[i].control))
+         if (ptrace (PTRACE_SETHBPREGS, pid,
+                     (PTRACE_TYPE_ARG3) ((i << 1) + 2),
+                     &proc_info->bpts[i].control) < 0)
+           perror_with_name ("Unexpected error setting breakpoint");
+
+       lwp_info->bpts_changed[i] = 0;
+      }
+
+  for (i = 0; i < arm_linux_get_hw_watchpoint_count (); i++)
+    if (lwp_info->wpts_changed[i])
+      {
+       errno = 0;
+
+       if (arm_hwbp_control_is_enabled (proc_info->wpts[i].control))
+         if (ptrace (PTRACE_SETHBPREGS, pid,
+                     (PTRACE_TYPE_ARG3) -((i << 1) + 1),
+                     &proc_info->wpts[i].address) < 0)
+           perror_with_name ("Unexpected error setting watchpoint address");
+
+       if (arm_hwbp_control_is_initialized (proc_info->wpts[i].control))
+         if (ptrace (PTRACE_SETHBPREGS, pid,
+                     (PTRACE_TYPE_ARG3) -((i << 1) + 2),
+                     &proc_info->wpts[i].control) < 0)
+           perror_with_name ("Unexpected error setting watchpoint");
+
+       lwp_info->wpts_changed[i] = 0;
+      }
+}
+
+
+static int
+arm_get_hwcap (unsigned long *valp)
+{
+  unsigned char *data = alloca (8);
+  int offset = 0;
+
+  while ((*the_target->read_auxv) (offset, data, 8) == 8)
+    {
+      unsigned int *data_p = (unsigned int *)data;
+      if (data_p[0] == AT_HWCAP)
+       {
+         *valp = data_p[1];
+         return 1;
+       }
+
+      offset += 8;
+    }
+
+  *valp = 0;
+  return 0;
+}
+
+static const struct target_desc *
+arm_read_description (void)
+{
+  int pid = lwpid_of (current_thread);
+
+  /* Query hardware watchpoint/breakpoint capabilities.  */
+  arm_linux_init_hwbp_cap (pid);
+
+  arm_hwcap = 0;
+  if (arm_get_hwcap (&arm_hwcap) == 0)
+    return tdesc_arm;
+
+  if (arm_hwcap & HWCAP_IWMMXT)
+    return tdesc_arm_with_iwmmxt;
+
+  if (arm_hwcap & HWCAP_VFP)
+    {
+      const struct target_desc *result;
+      char *buf;
+
+      /* NEON implies either no VFP, or VFPv3-D32.  We only support
+        it with VFP.  */
+      if (arm_hwcap & HWCAP_NEON)
+       result = tdesc_arm_with_neon;
+      else if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
+       result = tdesc_arm_with_vfpv3;
+      else
+       result = tdesc_arm_with_vfpv2;
+
+      /* Now make sure that the kernel supports reading these
+        registers.  Support was added in 2.6.30.  */
+      errno = 0;
+      buf = xmalloc (32 * 8 + 4);
+      if (ptrace (PTRACE_GETVFPREGS, pid, 0, buf) < 0
+         && errno == EIO)
+       {
+         arm_hwcap = 0;
+         result = tdesc_arm;
+       }
+      free (buf);
+
+      return result;
+    }
+
+  /* The default configuration uses legacy FPA registers, probably
+     simulated.  */
+  return tdesc_arm;
+}
+
+static void
+arm_arch_setup (void)
+{
+  current_process ()->tdesc = arm_read_description ();
+}
+
+static struct regset_info arm_regsets[] = {
+  { PTRACE_GETREGS, PTRACE_SETREGS, 0, 18 * 4,
+    GENERAL_REGS,
+    arm_fill_gregset, arm_store_gregset },
+  { PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS, 0, 16 * 8 + 6 * 4,
+    EXTENDED_REGS,
+    arm_fill_wmmxregset, arm_store_wmmxregset },
+  { PTRACE_GETVFPREGS, PTRACE_SETVFPREGS, 0, 32 * 8 + 4,
+    EXTENDED_REGS,
+    arm_fill_vfpregset, arm_store_vfpregset },
+  { 0, 0, 0, -1, -1, NULL, NULL }
+};
+
+static struct regsets_info arm_regsets_info =
+  {
+    arm_regsets, /* regsets */
+    0, /* num_regsets */
+    NULL, /* disabled_regsets */
+  };
+
+static struct usrregs_info arm_usrregs_info =
+  {
+    arm_num_regs,
+    arm_regmap,
+  };
+
+static struct regs_info regs_info =
+  {
+    NULL, /* regset_bitmap */
+    &arm_usrregs_info,
+    &arm_regsets_info
+  };
+
+static const struct regs_info *
+arm_regs_info (void)
+{
+  return &regs_info;
+}
+
+struct linux_target_ops the_low_target = {
+  arm_arch_setup,
+  arm_regs_info,
+  arm_cannot_fetch_register,
+  arm_cannot_store_register,
+  NULL, /* fetch_register */
+  arm_get_pc,
+  arm_set_pc,
+
+  /* Define an ARM-mode breakpoint; we only set breakpoints in the C
+     library, which is most likely to be ARM.  If the kernel supports
+     clone events, we will never insert a breakpoint, so even a Thumb
+     C library will work; so will mixing EABI/non-EABI gdbserver and
+     application.  */
+#ifndef __ARM_EABI__
+  (const unsigned char *) &arm_breakpoint,
+#else
+  (const unsigned char *) &arm_eabi_breakpoint,
+#endif
+  arm_breakpoint_len,
+  arm_reinsert_addr,
+  0,
+  arm_breakpoint_at,
+  arm_supports_z_point_type,
+  arm_insert_point,
+  arm_remove_point,
+  arm_stopped_by_watchpoint,
+  arm_stopped_data_address,
+  NULL, /* collect_ptrace_register */
+  NULL, /* supply_ptrace_register */
+  NULL, /* siginfo_fixup */
+  arm_new_process,
+  arm_new_thread,
+  arm_new_fork,
+  arm_prepare_to_resume,
+};
+
+void
+initialize_low_arch (void)
+{
+  /* Initialize the Linux target descriptions.  */
+  init_registers_arm ();
+  init_registers_arm_with_iwmmxt ();
+  init_registers_arm_with_vfpv2 ();
+  init_registers_arm_with_vfpv3 ();
+  init_registers_arm_with_neon ();
+
+  initialize_regsets_info (&arm_regsets_info);
+}
This page took 0.032135 seconds and 4 git commands to generate.