/* GNU/Linux/ARM specific low level interface, for the remote server for GDB.
- Copyright (C) 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+ Copyright (C) 1995-2015 Free Software Foundation, Inc.
This file is part of GDB.
#include "server.h"
#include "linux-low.h"
+#include "arch/arm.h"
+#include "linux-aarch32-low.h"
+#include <sys/uio.h>
/* Don't include elf.h if linux/elf.h got included by gdb_proc_service.h.
On Bionic elf.h and linux/elf.h have conflicting definitions. */
#ifndef ELFMAG0
#include <elf.h>
#endif
-#include <sys/ptrace.h>
+#include "nat/gdb_ptrace.h"
+#include <signal.h>
+
+#include "arch/arm.h"
/* Defined in auto-generated files. */
void init_registers_arm (void);
+extern const struct target_desc *tdesc_arm;
+
void init_registers_arm_with_iwmmxt (void);
+extern const struct target_desc *tdesc_arm_with_iwmmxt;
+
void init_registers_arm_with_vfpv2 (void);
+extern const struct target_desc *tdesc_arm_with_vfpv2;
+
void init_registers_arm_with_vfpv3 (void);
-void init_registers_arm_with_neon (void);
+extern const struct target_desc *tdesc_arm_with_vfpv3;
#ifndef PTRACE_GET_THREAD_AREA
#define PTRACE_GET_THREAD_AREA 22
# define PTRACE_SETVFPREGS 28
#endif
-static unsigned long arm_hwcap;
+#ifndef PTRACE_GETHBPREGS
+#define PTRACE_GETHBPREGS 29
+#define PTRACE_SETHBPREGS 30
+#endif
+
+/* Information describing the hardware breakpoint capabilities. */
+static struct
+{
+ unsigned char arch;
+ unsigned char max_wp_length;
+ unsigned char wp_count;
+ unsigned char bp_count;
+} arm_linux_hwbp_cap;
+
+/* Enum describing the different types of ARM hardware break-/watch-points. */
+typedef enum
+{
+ arm_hwbp_break = 0,
+ arm_hwbp_load = 1,
+ arm_hwbp_store = 2,
+ arm_hwbp_access = 3
+} arm_hwbp_type;
+
+/* Enum describing the different kinds of breakpoints. */
+enum arm_breakpoint_kinds
+{
+ ARM_BP_KIND_THUMB = 2,
+ ARM_BP_KIND_THUMB2 = 3,
+ ARM_BP_KIND_ARM = 4,
+};
+
+/* Type describing an ARM Hardware Breakpoint Control register value. */
+typedef unsigned int arm_hwbp_control_t;
+
+/* Structure used to keep track of hardware break-/watch-points. */
+struct arm_linux_hw_breakpoint
+{
+ /* Address to break on, or being watched. */
+ unsigned int address;
+ /* Control register for break-/watch- point. */
+ arm_hwbp_control_t control;
+};
+
+/* Since we cannot dynamically allocate subfields of arch_process_info,
+ assume a maximum number of supported break-/watchpoints. */
+#define MAX_BPTS 32
+#define MAX_WPTS 32
+
+/* Per-process arch-specific data we want to keep. */
+struct arch_process_info
+{
+ /* Hardware breakpoints for this process. */
+ struct arm_linux_hw_breakpoint bpts[MAX_BPTS];
+ /* Hardware watchpoints for this process. */
+ struct arm_linux_hw_breakpoint wpts[MAX_WPTS];
+};
+
+/* Per-thread arch-specific data we want to keep. */
+struct arch_lwp_info
+{
+ /* Non-zero if our copy differs from what's recorded in the thread. */
+ char bpts_changed[MAX_BPTS];
+ char wpts_changed[MAX_WPTS];
+ /* Cached stopped data address. */
+ CORE_ADDR stopped_data_address;
+};
/* These are in <asm/elf.h> in current kernels. */
#define HWCAP_VFP 64
return (regno >= arm_num_regs);
}
-static void
-arm_fill_gregset (struct regcache *regcache, void *buf)
-{
- int i;
-
- for (i = 0; i < arm_num_regs; i++)
- if (arm_regmap[i] != -1)
- collect_register (regcache, i, ((char *) buf) + arm_regmap[i]);
-}
-
-static void
-arm_store_gregset (struct regcache *regcache, const void *buf)
-{
- int i;
- char zerobuf[8];
-
- memset (zerobuf, 0, 8);
- for (i = 0; i < arm_num_regs; i++)
- if (arm_regmap[i] != -1)
- supply_register (regcache, i, ((char *) buf) + arm_regmap[i]);
- else
- supply_register (regcache, i, zerobuf);
-}
-
static void
arm_fill_wmmxregset (struct regcache *regcache, void *buf)
{
int i;
- if (!(arm_hwcap & HWCAP_IWMMXT))
+ if (regcache->tdesc != tdesc_arm_with_iwmmxt)
return;
for (i = 0; i < 16; i++)
{
int i;
- if (!(arm_hwcap & HWCAP_IWMMXT))
+ if (regcache->tdesc != tdesc_arm_with_iwmmxt)
return;
for (i = 0; i < 16; i++)
static void
arm_fill_vfpregset (struct regcache *regcache, void *buf)
{
- int i, num, base;
-
- if (!(arm_hwcap & HWCAP_VFP))
- return;
+ int num;
- if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
+ if (regcache->tdesc == tdesc_arm_with_neon
+ || regcache->tdesc == tdesc_arm_with_vfpv3)
num = 32;
- else
+ else if (regcache->tdesc == tdesc_arm_with_vfpv2)
num = 16;
+ else
+ return;
- base = find_regno ("d0");
- for (i = 0; i < num; i++)
- collect_register (regcache, base + i, (char *) buf + i * 8);
-
- collect_register_by_name (regcache, "fpscr", (char *) buf + 32 * 8);
+ arm_fill_vfpregset_num (regcache, buf, num);
}
static void
arm_store_vfpregset (struct regcache *regcache, const void *buf)
{
- int i, num, base;
+ int num;
- if (!(arm_hwcap & HWCAP_VFP))
- return;
-
- if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
+ if (regcache->tdesc == tdesc_arm_with_neon
+ || regcache->tdesc == tdesc_arm_with_vfpv3)
num = 32;
- else
+ else if (regcache->tdesc == tdesc_arm_with_vfpv2)
num = 16;
+ else
+ return;
- base = find_regno ("d0");
- for (i = 0; i < num; i++)
- supply_register (regcache, base + i, (char *) buf + i * 8);
-
- supply_register_by_name (regcache, "fpscr", (char *) buf + 32 * 8);
+ arm_store_vfpregset_num (regcache, buf, num);
}
extern int debug_threads;
unsigned long pc;
collect_register_by_name (regcache, "pc", &pc);
if (debug_threads)
- fprintf (stderr, "stop pc is %08lx\n", pc);
+ debug_printf ("stop pc is %08lx\n", pc);
return pc;
}
}
/* Correct in either endianness. */
-static const unsigned long arm_breakpoint = 0xef9f0001;
-#define arm_breakpoint_len 4
-static const unsigned short thumb_breakpoint = 0xde01;
-#define thumb_breakpoint_len 2
+#define arm_abi_breakpoint 0xef9f0001UL
/* For new EABI binaries. We recognize it regardless of which ABI
is used for gdbserver, so single threaded debugging should work
OK, but for multi-threaded debugging we only insert the current
ABI's breakpoint instruction. For now at least. */
-static const unsigned long arm_eabi_breakpoint = 0xe7f001f0;
+#define arm_eabi_breakpoint 0xe7f001f0UL
+
+#ifndef __ARM_EABI__
+static const unsigned long arm_breakpoint = arm_abi_breakpoint;
+#else
+static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
+#endif
+
+#define arm_breakpoint_len 4
+static const unsigned short thumb_breakpoint = 0xde01;
+#define thumb_breakpoint_len 2
+static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
+#define thumb2_breakpoint_len 4
static int
arm_breakpoint_at (CORE_ADDR where)
{
- struct regcache *regcache = get_thread_regcache (current_inferior, 1);
+ struct regcache *regcache = get_thread_regcache (current_thread, 1);
unsigned long cpsr;
collect_register_by_name (regcache, "cpsr", &cpsr);
(*the_target->read_memory) (where, (unsigned char *) &insn, 2);
if (insn == thumb_breakpoint)
return 1;
+
+ if (insn == thumb2_breakpoint[0])
+ {
+ (*the_target->read_memory) (where + 2, (unsigned char *) &insn, 2);
+ if (insn == thumb2_breakpoint[1])
+ return 1;
+ }
}
else
{
unsigned long insn;
(*the_target->read_memory) (where, (unsigned char *) &insn, 4);
- if (insn == arm_breakpoint)
+ if (insn == arm_abi_breakpoint)
return 1;
if (insn == arm_eabi_breakpoint)
static CORE_ADDR
arm_reinsert_addr (void)
{
- struct regcache *regcache = get_thread_regcache (current_inferior, 1);
+ struct regcache *regcache = get_thread_regcache (current_thread, 1);
unsigned long pc;
collect_register_by_name (regcache, "lr", &pc);
return pc;
return PS_OK;
}
+
+/* Query Hardware Breakpoint information for the target we are attached to
+ (using PID as ptrace argument) and set up arm_linux_hwbp_cap. */
+static void
+arm_linux_init_hwbp_cap (int pid)
+{
+ unsigned int val;
+
+ if (ptrace (PTRACE_GETHBPREGS, pid, 0, &val) < 0)
+ return;
+
+ arm_linux_hwbp_cap.arch = (unsigned char)((val >> 24) & 0xff);
+ if (arm_linux_hwbp_cap.arch == 0)
+ return;
+
+ arm_linux_hwbp_cap.max_wp_length = (unsigned char)((val >> 16) & 0xff);
+ arm_linux_hwbp_cap.wp_count = (unsigned char)((val >> 8) & 0xff);
+ arm_linux_hwbp_cap.bp_count = (unsigned char)(val & 0xff);
+
+ if (arm_linux_hwbp_cap.wp_count > MAX_WPTS)
+ internal_error (__FILE__, __LINE__, "Unsupported number of watchpoints");
+ if (arm_linux_hwbp_cap.bp_count > MAX_BPTS)
+ internal_error (__FILE__, __LINE__, "Unsupported number of breakpoints");
+}
+
+/* How many hardware breakpoints are available? */
+static int
+arm_linux_get_hw_breakpoint_count (void)
+{
+ return arm_linux_hwbp_cap.bp_count;
+}
+
+/* How many hardware watchpoints are available? */
+static int
+arm_linux_get_hw_watchpoint_count (void)
+{
+ return arm_linux_hwbp_cap.wp_count;
+}
+
+/* Maximum length of area watched by hardware watchpoint. */
+static int
+arm_linux_get_hw_watchpoint_max_length (void)
+{
+ return arm_linux_hwbp_cap.max_wp_length;
+}
+
+/* Initialize an ARM hardware break-/watch-point control register value.
+ BYTE_ADDRESS_SELECT is the mask of bytes to trigger on; HWBP_TYPE is the
+ type of break-/watch-point; ENABLE indicates whether the point is enabled.
+ */
+static arm_hwbp_control_t
+arm_hwbp_control_initialize (unsigned byte_address_select,
+ arm_hwbp_type hwbp_type,
+ int enable)
+{
+ gdb_assert ((byte_address_select & ~0xffU) == 0);
+ gdb_assert (hwbp_type != arm_hwbp_break
+ || ((byte_address_select & 0xfU) != 0));
+
+ return (byte_address_select << 5) | (hwbp_type << 3) | (3 << 1) | enable;
+}
+
+/* Does the breakpoint control value CONTROL have the enable bit set? */
+static int
+arm_hwbp_control_is_enabled (arm_hwbp_control_t control)
+{
+ return control & 0x1;
+}
+
+/* Is the breakpoint control value CONTROL initialized? */
+static int
+arm_hwbp_control_is_initialized (arm_hwbp_control_t control)
+{
+ return control != 0;
+}
+
+/* Change a breakpoint control word so that it is in the disabled state. */
+static arm_hwbp_control_t
+arm_hwbp_control_disable (arm_hwbp_control_t control)
+{
+ return control & ~0x1;
+}
+
+/* Are two break-/watch-points equal? */
+static int
+arm_linux_hw_breakpoint_equal (const struct arm_linux_hw_breakpoint *p1,
+ const struct arm_linux_hw_breakpoint *p2)
+{
+ return p1->address == p2->address && p1->control == p2->control;
+}
+
+/* Convert a raw breakpoint type to an enum arm_hwbp_type. */
+
+static arm_hwbp_type
+raw_bkpt_type_to_arm_hwbp_type (enum raw_bkpt_type raw_type)
+{
+ switch (raw_type)
+ {
+ case raw_bkpt_type_hw:
+ return arm_hwbp_break;
+ case raw_bkpt_type_write_wp:
+ return arm_hwbp_store;
+ case raw_bkpt_type_read_wp:
+ return arm_hwbp_load;
+ case raw_bkpt_type_access_wp:
+ return arm_hwbp_access;
+ default:
+ gdb_assert_not_reached ("unhandled raw type");
+ }
+}
+
+/* Initialize the hardware breakpoint structure P for a breakpoint or
+ watchpoint at ADDR to LEN. The type of watchpoint is given in TYPE.
+ Returns -1 if TYPE is unsupported, or -2 if the particular combination
+ of ADDR and LEN cannot be implemented. Otherwise, returns 0 if TYPE
+ represents a breakpoint and 1 if type represents a watchpoint. */
+static int
+arm_linux_hw_point_initialize (enum raw_bkpt_type raw_type, CORE_ADDR addr,
+ int len, struct arm_linux_hw_breakpoint *p)
+{
+ arm_hwbp_type hwbp_type;
+ unsigned mask;
+
+ hwbp_type = raw_bkpt_type_to_arm_hwbp_type (raw_type);
+
+ if (hwbp_type == arm_hwbp_break)
+ {
+ /* For breakpoints, the length field encodes the mode. */
+ switch (len)
+ {
+ case 2: /* 16-bit Thumb mode breakpoint */
+ case 3: /* 32-bit Thumb mode breakpoint */
+ mask = 0x3;
+ addr &= ~1;
+ break;
+ case 4: /* 32-bit ARM mode breakpoint */
+ mask = 0xf;
+ addr &= ~3;
+ break;
+ default:
+ /* Unsupported. */
+ return -2;
+ }
+ }
+ else
+ {
+ CORE_ADDR max_wp_length = arm_linux_get_hw_watchpoint_max_length ();
+ CORE_ADDR aligned_addr;
+
+ /* Can not set watchpoints for zero or negative lengths. */
+ if (len <= 0)
+ return -2;
+ /* The current ptrace interface can only handle watchpoints that are a
+ power of 2. */
+ if ((len & (len - 1)) != 0)
+ return -2;
+
+ /* Test that the range [ADDR, ADDR + LEN) fits into the largest address
+ range covered by a watchpoint. */
+ aligned_addr = addr & ~(max_wp_length - 1);
+ if (aligned_addr + max_wp_length < addr + len)
+ return -2;
+
+ mask = (1 << len) - 1;
+ }
+
+ p->address = (unsigned int) addr;
+ p->control = arm_hwbp_control_initialize (mask, hwbp_type, 1);
+
+ return hwbp_type != arm_hwbp_break;
+}
+
+/* Callback to mark a watch-/breakpoint to be updated in all threads of
+ the current process. */
+
+struct update_registers_data
+{
+ int watch;
+ int i;
+};
+
+static int
+update_registers_callback (struct inferior_list_entry *entry, void *arg)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ struct update_registers_data *data = (struct update_registers_data *) arg;
+
+ /* Only update the threads of the current process. */
+ if (pid_of (thread) == pid_of (current_thread))
+ {
+ /* The actual update is done later just before resuming the lwp,
+ we just mark that the registers need updating. */
+ if (data->watch)
+ lwp->arch_private->wpts_changed[data->i] = 1;
+ else
+ lwp->arch_private->bpts_changed[data->i] = 1;
+
+ /* If the lwp isn't stopped, force it to momentarily pause, so
+ we can update its breakpoint registers. */
+ if (!lwp->stopped)
+ linux_stop_lwp (lwp);
+ }
+
+ return 0;
+}
+
+static int
+arm_supports_z_point_type (char z_type)
+{
+ switch (z_type)
+ {
+ case Z_PACKET_SW_BP:
+ case Z_PACKET_HW_BP:
+ case Z_PACKET_WRITE_WP:
+ case Z_PACKET_READ_WP:
+ case Z_PACKET_ACCESS_WP:
+ return 1;
+ default:
+ /* Leave the handling of sw breakpoints with the gdb client. */
+ return 0;
+ }
+}
+
+/* Insert hardware break-/watchpoint. */
+static int
+arm_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
+ int len, struct raw_breakpoint *bp)
+{
+ struct process_info *proc = current_process ();
+ struct arm_linux_hw_breakpoint p, *pts;
+ int watch, i, count;
+
+ watch = arm_linux_hw_point_initialize (type, addr, len, &p);
+ if (watch < 0)
+ {
+ /* Unsupported. */
+ return watch == -1 ? 1 : -1;
+ }
+
+ if (watch)
+ {
+ count = arm_linux_get_hw_watchpoint_count ();
+ pts = proc->priv->arch_private->wpts;
+ }
+ else
+ {
+ count = arm_linux_get_hw_breakpoint_count ();
+ pts = proc->priv->arch_private->bpts;
+ }
+
+ for (i = 0; i < count; i++)
+ if (!arm_hwbp_control_is_enabled (pts[i].control))
+ {
+ struct update_registers_data data = { watch, i };
+ pts[i] = p;
+ find_inferior (&all_threads, update_registers_callback, &data);
+ return 0;
+ }
+
+ /* We're out of watchpoints. */
+ return -1;
+}
+
+/* Remove hardware break-/watchpoint. */
+static int
+arm_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
+ int len, struct raw_breakpoint *bp)
+{
+ struct process_info *proc = current_process ();
+ struct arm_linux_hw_breakpoint p, *pts;
+ int watch, i, count;
+
+ watch = arm_linux_hw_point_initialize (type, addr, len, &p);
+ if (watch < 0)
+ {
+ /* Unsupported. */
+ return -1;
+ }
+
+ if (watch)
+ {
+ count = arm_linux_get_hw_watchpoint_count ();
+ pts = proc->priv->arch_private->wpts;
+ }
+ else
+ {
+ count = arm_linux_get_hw_breakpoint_count ();
+ pts = proc->priv->arch_private->bpts;
+ }
+
+ for (i = 0; i < count; i++)
+ if (arm_linux_hw_breakpoint_equal (&p, pts + i))
+ {
+ struct update_registers_data data = { watch, i };
+ pts[i].control = arm_hwbp_control_disable (pts[i].control);
+ find_inferior (&all_threads, update_registers_callback, &data);
+ return 0;
+ }
+
+ /* No watchpoint matched. */
+ return -1;
+}
+
+/* Return whether current thread is stopped due to a watchpoint. */
+static int
+arm_stopped_by_watchpoint (void)
+{
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+ siginfo_t siginfo;
+
+ /* We must be able to set hardware watchpoints. */
+ if (arm_linux_get_hw_watchpoint_count () == 0)
+ return 0;
+
+ /* Retrieve siginfo. */
+ errno = 0;
+ ptrace (PTRACE_GETSIGINFO, lwpid_of (current_thread), 0, &siginfo);
+ if (errno != 0)
+ return 0;
+
+ /* This must be a hardware breakpoint. */
+ if (siginfo.si_signo != SIGTRAP
+ || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */)
+ return 0;
+
+ /* If we are in a positive slot then we're looking at a breakpoint and not
+ a watchpoint. */
+ if (siginfo.si_errno >= 0)
+ return 0;
+
+ /* Cache stopped data address for use by arm_stopped_data_address. */
+ lwp->arch_private->stopped_data_address
+ = (CORE_ADDR) (uintptr_t) siginfo.si_addr;
+
+ return 1;
+}
+
+/* Return data address that triggered watchpoint. Called only if
+ arm_stopped_by_watchpoint returned true. */
+static CORE_ADDR
+arm_stopped_data_address (void)
+{
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+ return lwp->arch_private->stopped_data_address;
+}
+
+/* Called when a new process is created. */
+static struct arch_process_info *
+arm_new_process (void)
+{
+ struct arch_process_info *info = XCNEW (struct arch_process_info);
+ return info;
+}
+
+/* Called when a new thread is detected. */
+static void
+arm_new_thread (struct lwp_info *lwp)
+{
+ struct arch_lwp_info *info = XCNEW (struct arch_lwp_info);
+ int i;
+
+ for (i = 0; i < MAX_BPTS; i++)
+ info->bpts_changed[i] = 1;
+ for (i = 0; i < MAX_WPTS; i++)
+ info->wpts_changed[i] = 1;
+
+ lwp->arch_private = info;
+}
+
+static void
+arm_new_fork (struct process_info *parent, struct process_info *child)
+{
+ struct arch_process_info *parent_proc_info;
+ struct arch_process_info *child_proc_info;
+ struct lwp_info *child_lwp;
+ struct arch_lwp_info *child_lwp_info;
+ int i;
+
+ /* These are allocated by linux_add_process. */
+ gdb_assert (parent->priv != NULL
+ && parent->priv->arch_private != NULL);
+ gdb_assert (child->priv != NULL
+ && child->priv->arch_private != NULL);
+
+ parent_proc_info = parent->priv->arch_private;
+ child_proc_info = child->priv->arch_private;
+
+ /* Linux kernel before 2.6.33 commit
+ 72f674d203cd230426437cdcf7dd6f681dad8b0d
+ will inherit hardware debug registers from parent
+ on fork/vfork/clone. Newer Linux kernels create such tasks with
+ zeroed debug registers.
+
+ GDB core assumes the child inherits the watchpoints/hw
+ breakpoints of the parent, and will remove them all from the
+ forked off process. Copy the debug registers mirrors into the
+ new process so that all breakpoints and watchpoints can be
+ removed together. The debug registers mirror will become zeroed
+ in the end before detaching the forked off process, thus making
+ this compatible with older Linux kernels too. */
+
+ *child_proc_info = *parent_proc_info;
+
+ /* Mark all the hardware breakpoints and watchpoints as changed to
+ make sure that the registers will be updated. */
+ child_lwp = find_lwp_pid (ptid_of (child));
+ child_lwp_info = child_lwp->arch_private;
+ for (i = 0; i < MAX_BPTS; i++)
+ child_lwp_info->bpts_changed[i] = 1;
+ for (i = 0; i < MAX_WPTS; i++)
+ child_lwp_info->wpts_changed[i] = 1;
+}
+
+/* Called when resuming a thread.
+ If the debug regs have changed, update the thread's copies. */
+static void
+arm_prepare_to_resume (struct lwp_info *lwp)
+{
+ struct thread_info *thread = get_lwp_thread (lwp);
+ int pid = lwpid_of (thread);
+ struct process_info *proc = find_process_pid (pid_of (thread));
+ struct arch_process_info *proc_info = proc->priv->arch_private;
+ struct arch_lwp_info *lwp_info = lwp->arch_private;
+ int i;
+
+ for (i = 0; i < arm_linux_get_hw_breakpoint_count (); i++)
+ if (lwp_info->bpts_changed[i])
+ {
+ errno = 0;
+
+ if (arm_hwbp_control_is_enabled (proc_info->bpts[i].control))
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_TYPE_ARG3) ((i << 1) + 1),
+ &proc_info->bpts[i].address) < 0)
+ perror_with_name ("Unexpected error setting breakpoint address");
+
+ if (arm_hwbp_control_is_initialized (proc_info->bpts[i].control))
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_TYPE_ARG3) ((i << 1) + 2),
+ &proc_info->bpts[i].control) < 0)
+ perror_with_name ("Unexpected error setting breakpoint");
+
+ lwp_info->bpts_changed[i] = 0;
+ }
+
+ for (i = 0; i < arm_linux_get_hw_watchpoint_count (); i++)
+ if (lwp_info->wpts_changed[i])
+ {
+ errno = 0;
+
+ if (arm_hwbp_control_is_enabled (proc_info->wpts[i].control))
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_TYPE_ARG3) -((i << 1) + 1),
+ &proc_info->wpts[i].address) < 0)
+ perror_with_name ("Unexpected error setting watchpoint address");
+
+ if (arm_hwbp_control_is_initialized (proc_info->wpts[i].control))
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_TYPE_ARG3) -((i << 1) + 2),
+ &proc_info->wpts[i].control) < 0)
+ perror_with_name ("Unexpected error setting watchpoint");
+
+ lwp_info->wpts_changed[i] = 0;
+ }
+}
+
+
static int
arm_get_hwcap (unsigned long *valp)
{
- unsigned char *data = alloca (8);
+ unsigned char *data = (unsigned char *) alloca (8);
int offset = 0;
while ((*the_target->read_auxv) (offset, data, 8) == 8)
return 0;
}
-static void
-arm_arch_setup (void)
+static const struct target_desc *
+arm_read_description (void)
{
- arm_hwcap = 0;
+ int pid = lwpid_of (current_thread);
+ unsigned long arm_hwcap = 0;
+
+ /* Query hardware watchpoint/breakpoint capabilities. */
+ arm_linux_init_hwbp_cap (pid);
+
if (arm_get_hwcap (&arm_hwcap) == 0)
- {
- init_registers_arm ();
- return;
- }
+ return tdesc_arm;
if (arm_hwcap & HWCAP_IWMMXT)
- {
- init_registers_arm_with_iwmmxt ();
- return;
- }
+ return tdesc_arm_with_iwmmxt;
if (arm_hwcap & HWCAP_VFP)
{
- int pid;
+ const struct target_desc *result;
char *buf;
/* NEON implies either no VFP, or VFPv3-D32. We only support
it with VFP. */
if (arm_hwcap & HWCAP_NEON)
- init_registers_arm_with_neon ();
+ result = tdesc_arm_with_neon;
else if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
- init_registers_arm_with_vfpv3 ();
+ result = tdesc_arm_with_vfpv3;
else
- init_registers_arm_with_vfpv2 ();
+ result = tdesc_arm_with_vfpv2;
/* Now make sure that the kernel supports reading these
registers. Support was added in 2.6.30. */
- pid = lwpid_of (get_thread_lwp (current_inferior));
errno = 0;
- buf = malloc (32 * 8 + 4);
+ buf = (char *) xmalloc (32 * 8 + 4);
if (ptrace (PTRACE_GETVFPREGS, pid, 0, buf) < 0
&& errno == EIO)
- {
- arm_hwcap = 0;
- init_registers_arm ();
- }
+ result = tdesc_arm;
+
free (buf);
- return;
+ return result;
}
/* The default configuration uses legacy FPA registers, probably
simulated. */
- init_registers_arm ();
+ return tdesc_arm;
+}
+
+static void
+arm_arch_setup (void)
+{
+ int tid = lwpid_of (current_thread);
+ int gpregs[18];
+ struct iovec iov;
+
+ current_process ()->tdesc = arm_read_description ();
+
+ iov.iov_base = gpregs;
+ iov.iov_len = sizeof (gpregs);
+
+ /* Check if PTRACE_GETREGSET works. */
+ if (ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iov) == 0)
+ have_ptrace_getregset = 1;
+ else
+ have_ptrace_getregset = 0;
}
-struct regset_info target_regsets[] = {
- { PTRACE_GETREGS, PTRACE_SETREGS, 18 * 4,
+/* Register sets without using PTRACE_GETREGSET. */
+
+static struct regset_info arm_regsets[] = {
+ { PTRACE_GETREGS, PTRACE_SETREGS, 0, 18 * 4,
GENERAL_REGS,
arm_fill_gregset, arm_store_gregset },
- { PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS, 16 * 8 + 6 * 4,
+ { PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS, 0, 16 * 8 + 6 * 4,
EXTENDED_REGS,
arm_fill_wmmxregset, arm_store_wmmxregset },
- { PTRACE_GETVFPREGS, PTRACE_SETVFPREGS, 32 * 8 + 4,
+ { PTRACE_GETVFPREGS, PTRACE_SETVFPREGS, 0, 32 * 8 + 4,
EXTENDED_REGS,
arm_fill_vfpregset, arm_store_vfpregset },
- { 0, 0, -1, -1, NULL, NULL }
+ NULL_REGSET
};
-struct linux_target_ops the_low_target = {
- arm_arch_setup,
- arm_num_regs,
- arm_regmap,
- arm_cannot_fetch_register,
- arm_cannot_store_register,
- arm_get_pc,
- arm_set_pc,
+static struct regsets_info arm_regsets_info =
+ {
+ arm_regsets, /* regsets */
+ 0, /* num_regsets */
+ NULL, /* disabled_regsets */
+ };
+
+static struct usrregs_info arm_usrregs_info =
+ {
+ arm_num_regs,
+ arm_regmap,
+ };
+
+static struct regs_info regs_info_arm =
+ {
+ NULL, /* regset_bitmap */
+ &arm_usrregs_info,
+ &arm_regsets_info
+ };
+
+static const struct regs_info *
+arm_regs_info (void)
+{
+ const struct target_desc *tdesc = current_process ()->tdesc;
+
+ if (have_ptrace_getregset == 1
+ && (tdesc == tdesc_arm_with_neon || tdesc == tdesc_arm_with_vfpv3))
+ return ®s_info_aarch32;
+ else
+ return ®s_info_arm;
+}
+
+/* Implementation of linux_target_ops method "breakpoint_kind_from_pc".
+
+ Determine the type and size of breakpoint to insert at PCPTR. Uses the
+ program counter value to determine whether a 16-bit or 32-bit breakpoint
+ should be used. It returns the breakpoint's kind, and adjusts the program
+ counter (if necessary) to point to the actual memory location where the
+ breakpoint should be inserted. */
+static int
+arm_breakpoint_kind_from_pc (CORE_ADDR *pcptr)
+{
+ if (IS_THUMB_ADDR (*pcptr))
+ {
+ gdb_byte buf[2];
+
+ *pcptr = UNMAKE_THUMB_ADDR (*pcptr);
+
+ /* Check whether we are replacing a thumb2 32-bit instruction. */
+ if ((*the_target->read_memory) (*pcptr, buf, 2) == 0)
+ {
+ unsigned short inst1 = 0;
+
+ (*the_target->read_memory) (*pcptr, (gdb_byte *) &inst1, 2);
+ if (thumb_insn_size (inst1) == 4)
+ return ARM_BP_KIND_THUMB2;
+ }
+ return ARM_BP_KIND_THUMB;
+ }
+ else
+ return ARM_BP_KIND_ARM;
+}
+
+/* Implementation of the linux_target_ops method "sw_breakpoint_from_kind". */
+
+static const gdb_byte *
+arm_sw_breakpoint_from_kind (int kind , int *size)
+{
+ *size = arm_breakpoint_len;
/* Define an ARM-mode breakpoint; we only set breakpoints in the C
library, which is most likely to be ARM. If the kernel supports
clone events, we will never insert a breakpoint, so even a Thumb
C library will work; so will mixing EABI/non-EABI gdbserver and
application. */
-#ifndef __ARM_EABI__
- (const unsigned char *) &arm_breakpoint,
-#else
- (const unsigned char *) &arm_eabi_breakpoint,
-#endif
- arm_breakpoint_len,
+ switch (kind)
+ {
+ case ARM_BP_KIND_THUMB:
+ *size = thumb_breakpoint_len;
+ return (gdb_byte *) &thumb_breakpoint;
+ case ARM_BP_KIND_THUMB2:
+ *size = thumb2_breakpoint_len;
+ return (gdb_byte *) &thumb2_breakpoint;
+ case ARM_BP_KIND_ARM:
+ *size = arm_breakpoint_len;
+ return (const gdb_byte *) &arm_breakpoint;
+ default:
+ return NULL;
+ }
+ return NULL;
+}
+
+struct linux_target_ops the_low_target = {
+ arm_arch_setup,
+ arm_regs_info,
+ arm_cannot_fetch_register,
+ arm_cannot_store_register,
+ NULL, /* fetch_register */
+ arm_get_pc,
+ arm_set_pc,
+ arm_breakpoint_kind_from_pc,
+ arm_sw_breakpoint_from_kind,
arm_reinsert_addr,
0,
arm_breakpoint_at,
+ arm_supports_z_point_type,
+ arm_insert_point,
+ arm_remove_point,
+ arm_stopped_by_watchpoint,
+ arm_stopped_data_address,
+ NULL, /* collect_ptrace_register */
+ NULL, /* supply_ptrace_register */
+ NULL, /* siginfo_fixup */
+ arm_new_process,
+ arm_new_thread,
+ arm_new_fork,
+ arm_prepare_to_resume,
};
+
+void
+initialize_low_arch (void)
+{
+ /* Initialize the Linux target descriptions. */
+ init_registers_arm ();
+ init_registers_arm_with_iwmmxt ();
+ init_registers_arm_with_vfpv2 ();
+ init_registers_arm_with_vfpv3 ();
+
+ initialize_low_arch_aarch32 ();
+
+ initialize_regsets_info (&arm_regsets_info);
+}