/* Low level interface to ptrace, for the remote server for GDB.
- Copyright (C) 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+ Copyright (C) 1995-2015 Free Software Foundation, Inc.
This file is part of GDB.
#include "server.h"
#include "linux-low.h"
+#include "nat/linux-osdata.h"
+#include "agent.h"
+#include "tdesc.h"
-#include <sys/wait.h>
-#include <stdio.h>
-#include <sys/param.h>
+#include "nat/linux-nat.h"
+#include "nat/linux-waitpid.h"
+#include "gdb_wait.h"
#include <sys/ptrace.h>
+#include "nat/linux-ptrace.h"
+#include "nat/linux-procfs.h"
+#include "nat/linux-personality.h"
#include <signal.h>
#include <sys/ioctl.h>
#include <fcntl.h>
-#include <string.h>
-#include <stdlib.h>
#include <unistd.h>
-#include <errno.h>
#include <sys/syscall.h>
#include <sched.h>
#include <ctype.h>
#include <dirent.h>
#include <sys/stat.h>
#include <sys/vfs.h>
+#include <sys/uio.h>
+#include "filestuff.h"
+#include "tracepoint.h"
+#include "hostio.h"
#ifndef ELFMAG0
/* Don't include <linux/elf.h> here. If it got included by gdb_proc_service.h
then ELFMAG0 will have been defined. If it didn't get included by
#define SPUFS_MAGIC 0x23c9b64e
#endif
-#ifndef PTRACE_GETSIGINFO
-# define PTRACE_GETSIGINFO 0x4202
-# define PTRACE_SETSIGINFO 0x4203
+#ifdef HAVE_PERSONALITY
+# include <sys/personality.h>
+# if !HAVE_DECL_ADDR_NO_RANDOMIZE
+# define ADDR_NO_RANDOMIZE 0x0040000
+# endif
#endif
#ifndef O_LARGEFILE
#define O_LARGEFILE 0
#endif
-/* If the system headers did not provide the constants, hard-code the normal
- values. */
-#ifndef PTRACE_EVENT_FORK
-
-#define PTRACE_SETOPTIONS 0x4200
-#define PTRACE_GETEVENTMSG 0x4201
-
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-#define PTRACE_O_TRACEFORK 0x00000002
-#define PTRACE_O_TRACEVFORK 0x00000004
-#define PTRACE_O_TRACECLONE 0x00000008
-#define PTRACE_O_TRACEEXEC 0x00000010
-#define PTRACE_O_TRACEVFORKDONE 0x00000020
-#define PTRACE_O_TRACEEXIT 0x00000040
-
-/* Wait extended result codes for the above trace options. */
-#define PTRACE_EVENT_FORK 1
-#define PTRACE_EVENT_VFORK 2
-#define PTRACE_EVENT_CLONE 3
-#define PTRACE_EVENT_EXEC 4
-#define PTRACE_EVENT_VFORK_DONE 5
-#define PTRACE_EVENT_EXIT 6
-
-#endif /* PTRACE_EVENT_FORK */
-
-/* We can't always assume that this flag is available, but all systems
- with the ptrace event handlers also have __WALL, so it's safe to use
- in some contexts. */
-#ifndef __WALL
-#define __WALL 0x40000000 /* Wait for any child. */
-#endif
-
#ifndef W_STOPCODE
#define W_STOPCODE(sig) ((sig) << 8 | 0x7f)
#endif
-#ifdef __UCLIBC__
-#if !(defined(__UCLIBC_HAS_MMU__) || defined(__ARCH_HAS_MMU__))
-#define HAS_NOMMU
+/* This is the kernel's hard limit. Not to be confused with
+ SIGRTMIN. */
+#ifndef __SIGRTMIN
+#define __SIGRTMIN 32
+#endif
+
+/* Some targets did not define these ptrace constants from the start,
+ so gdbserver defines them locally here. In the future, these may
+ be removed after they are added to asm/ptrace.h. */
+#if !(defined(PT_TEXT_ADDR) \
+ || defined(PT_DATA_ADDR) \
+ || defined(PT_TEXT_END_ADDR))
+#if defined(__mcoldfire__)
+/* These are still undefined in 3.10 kernels. */
+#define PT_TEXT_ADDR 49*4
+#define PT_DATA_ADDR 50*4
+#define PT_TEXT_END_ADDR 51*4
+/* BFIN already defines these since at least 2.6.32 kernels. */
+#elif defined(BFIN)
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+/* These are still undefined in 3.10 kernels. */
+#elif defined(__TMS320C6X__)
+#define PT_TEXT_ADDR (0x10000*4)
+#define PT_DATA_ADDR (0x10004*4)
+#define PT_TEXT_END_ADDR (0x10008*4)
+#endif
+#endif
+
+#ifdef HAVE_LINUX_BTRACE
+# include "nat/linux-btrace.h"
+# include "btrace-common.h"
+#endif
+
+#ifndef HAVE_ELF32_AUXV_T
+/* Copied from glibc's elf.h. */
+typedef struct
+{
+ uint32_t a_type; /* Entry type */
+ union
+ {
+ uint32_t a_val; /* Integer value */
+ /* We use to have pointer elements added here. We cannot do that,
+ though, since it does not work when using 32-bit definitions
+ on 64-bit platforms and vice versa. */
+ } a_un;
+} Elf32_auxv_t;
#endif
+
+#ifndef HAVE_ELF64_AUXV_T
+/* Copied from glibc's elf.h. */
+typedef struct
+{
+ uint64_t a_type; /* Entry type */
+ union
+ {
+ uint64_t a_val; /* Integer value */
+ /* We use to have pointer elements added here. We cannot do that,
+ though, since it does not work when using 32-bit definitions
+ on 64-bit platforms and vice versa. */
+ } a_un;
+} Elf64_auxv_t;
#endif
-/* ``all_threads'' is keyed by the LWP ID, which we use as the GDB protocol
- representation of the thread ID.
+/* LWP accessors. */
+
+/* See nat/linux-nat.h. */
+
+ptid_t
+ptid_of_lwp (struct lwp_info *lwp)
+{
+ return ptid_of (get_lwp_thread (lwp));
+}
+
+/* See nat/linux-nat.h. */
+
+void
+lwp_set_arch_private_info (struct lwp_info *lwp,
+ struct arch_lwp_info *info)
+{
+ lwp->arch_private = info;
+}
+
+/* See nat/linux-nat.h. */
+
+struct arch_lwp_info *
+lwp_arch_private_info (struct lwp_info *lwp)
+{
+ return lwp->arch_private;
+}
+
+/* See nat/linux-nat.h. */
- ``all_lwps'' is keyed by the process ID - which on Linux is (presently)
- the same as the LWP ID.
+int
+lwp_is_stopped (struct lwp_info *lwp)
+{
+ return lwp->stopped;
+}
+
+/* See nat/linux-nat.h. */
+
+enum target_stop_reason
+lwp_stop_reason (struct lwp_info *lwp)
+{
+ return lwp->stop_reason;
+}
+
+/* A list of all unknown processes which receive stop signals. Some
+ other process will presumably claim each of these as forked
+ children momentarily. */
+
+struct simple_pid_list
+{
+ /* The process ID. */
+ int pid;
+
+ /* The status as reported by waitpid. */
+ int status;
+
+ /* Next in chain. */
+ struct simple_pid_list *next;
+};
+struct simple_pid_list *stopped_pids;
+
+/* Trivial list manipulation functions to keep track of a list of new
+ stopped processes. */
+
+static void
+add_to_pid_list (struct simple_pid_list **listp, int pid, int status)
+{
+ struct simple_pid_list *new_pid = xmalloc (sizeof (struct simple_pid_list));
+
+ new_pid->pid = pid;
+ new_pid->status = status;
+ new_pid->next = *listp;
+ *listp = new_pid;
+}
+
+static int
+pull_pid_from_list (struct simple_pid_list **listp, int pid, int *statusp)
+{
+ struct simple_pid_list **p;
+
+ for (p = listp; *p != NULL; p = &(*p)->next)
+ if ((*p)->pid == pid)
+ {
+ struct simple_pid_list *next = (*p)->next;
- ``all_processes'' is keyed by the "overall process ID", which
- GNU/Linux calls tgid, "thread group ID". */
+ *statusp = (*p)->status;
+ xfree (*p);
+ *p = next;
+ return 1;
+ }
+ return 0;
+}
-struct inferior_list all_lwps;
+enum stopping_threads_kind
+ {
+ /* Not stopping threads presently. */
+ NOT_STOPPING_THREADS,
-/* A list of all unknown processes which receive stop signals. Some other
- process will presumably claim each of these as forked children
- momentarily. */
+ /* Stopping threads. */
+ STOPPING_THREADS,
-struct inferior_list stopped_pids;
+ /* Stopping and suspending threads. */
+ STOPPING_AND_SUSPENDING_THREADS
+ };
-/* FIXME this is a bit of a hack, and could be removed. */
-int stopping_threads;
+/* This is set while stop_all_lwps is in effect. */
+enum stopping_threads_kind stopping_threads = NOT_STOPPING_THREADS;
/* FIXME make into a target method? */
int using_threads = 1;
-/* This flag is true iff we've just created or attached to our first
- inferior but it has not stopped yet. As soon as it does, we need
- to call the low target's arch_setup callback. Doing this only on
- the first inferior avoids reinializing the architecture on every
- inferior, and avoids messing with the register caches of the
- already running inferiors. NOTE: this assumes all inferiors under
- control of gdbserver have the same architecture. */
-static int new_inferior;
+/* True if we're presently stabilizing threads (moving them out of
+ jump pads). */
+static int stabilizing_threads;
static void linux_resume_one_lwp (struct lwp_info *lwp,
int step, int signal, siginfo_t *info);
static void linux_resume (struct thread_resume *resume_info, size_t n);
-static void stop_all_lwps (void);
+static void stop_all_lwps (int suspend, struct lwp_info *except);
+static void unstop_all_lwps (int unsuspend, struct lwp_info *except);
+static int linux_wait_for_event_filtered (ptid_t wait_ptid, ptid_t filter_ptid,
+ int *wstat, int options);
static int linux_wait_for_event (ptid_t ptid, int *wstat, int options);
-static int check_removed_breakpoint (struct lwp_info *event_child);
-static void *add_lwp (ptid_t ptid);
+static struct lwp_info *add_lwp (ptid_t ptid);
static int linux_stopped_by_watchpoint (void);
static void mark_lwp_dead (struct lwp_info *lwp, int wstat);
-static int linux_core_of_thread (ptid_t ptid);
+static void proceed_all_lwps (void);
+static int finish_step_over (struct lwp_info *lwp);
+static int kill_lwp (unsigned long lwpid, int signo);
+
+/* When the event-loop is doing a step-over, this points at the thread
+ being stepped. */
+ptid_t step_over_bkpt;
+
+/* True if the low target can hardware single-step. Such targets
+ don't need a BREAKPOINT_REINSERT_ADDR callback. */
+
+static int
+can_hardware_single_step (void)
+{
+ return (the_low_target.breakpoint_reinsert_addr == NULL);
+}
+
+/* True if the low target supports memory breakpoints. If so, we'll
+ have a GET_PC implementation. */
+
+static int
+supports_breakpoints (void)
+{
+ return (the_low_target.get_pc != NULL);
+}
+
+/* Returns true if this target can support fast tracepoints. This
+ does not mean that the in-process agent has been loaded in the
+ inferior. */
+
+static int
+supports_fast_tracepoints (void)
+{
+ return the_low_target.install_fast_tracepoint_jump_pad != NULL;
+}
+
+/* True if LWP is stopped in its stepping range. */
+
+static int
+lwp_in_step_range (struct lwp_info *lwp)
+{
+ CORE_ADDR pc = lwp->stop_pc;
+
+ return (pc >= lwp->step_range_start && pc < lwp->step_range_end);
+}
struct pending_signals
{
struct pending_signals *prev;
};
-#define PTRACE_ARG3_TYPE void *
-#define PTRACE_ARG4_TYPE void *
-#define PTRACE_XFER_TYPE long
-
-#ifdef HAVE_LINUX_REGSETS
-static char *disabled_regsets;
-static int num_regsets;
-#endif
-
/* The read/write ends of the pipe registered as waitable file in the
event loop. */
static int linux_event_pipe[2] = { -1, -1 };
/* True if we're currently in async mode. */
#define target_is_async_p() (linux_event_pipe[0] != -1)
-static void send_sigstop (struct inferior_list_entry *entry);
-static void wait_for_sigstop (struct inferior_list_entry *entry);
-
-/* Accepts an integer PID; Returns a string representing a file that
- can be opened to get info for the child process.
- Space for the result is malloc'd, caller must free. */
-
-char *
-linux_child_pid_to_exec_file (int pid)
-{
- char *name1, *name2;
-
- name1 = xmalloc (MAXPATHLEN);
- name2 = xmalloc (MAXPATHLEN);
- memset (name2, 0, MAXPATHLEN);
-
- sprintf (name1, "/proc/%d/exe", pid);
- if (readlink (name1, name2, MAXPATHLEN) > 0)
- {
- free (name1);
- return name2;
- }
- else
- {
- free (name2);
- return name1;
- }
-}
+static void send_sigstop (struct lwp_info *lwp);
+static void wait_for_sigstop (void);
/* Return non-zero if HEADER is a 64-bit ELF file. */
static int
-elf_64_header_p (const Elf64_Ehdr *header)
+elf_64_header_p (const Elf64_Ehdr *header, unsigned int *machine)
{
- return (header->e_ident[EI_MAG0] == ELFMAG0
- && header->e_ident[EI_MAG1] == ELFMAG1
- && header->e_ident[EI_MAG2] == ELFMAG2
- && header->e_ident[EI_MAG3] == ELFMAG3
- && header->e_ident[EI_CLASS] == ELFCLASS64);
+ if (header->e_ident[EI_MAG0] == ELFMAG0
+ && header->e_ident[EI_MAG1] == ELFMAG1
+ && header->e_ident[EI_MAG2] == ELFMAG2
+ && header->e_ident[EI_MAG3] == ELFMAG3)
+ {
+ *machine = header->e_machine;
+ return header->e_ident[EI_CLASS] == ELFCLASS64;
+
+ }
+ *machine = EM_NONE;
+ return -1;
}
/* Return non-zero if FILE is a 64-bit ELF file,
zero if the file is not a 64-bit ELF file,
and -1 if the file is not accessible or doesn't exist. */
-int
-elf_64_file_p (const char *file)
+static int
+elf_64_file_p (const char *file, unsigned int *machine)
{
Elf64_Ehdr header;
int fd;
}
close (fd);
- return elf_64_header_p (&header);
+ return elf_64_header_p (&header, machine);
+}
+
+/* Accepts an integer PID; Returns true if the executable PID is
+ running is a 64-bit ELF file.. */
+
+int
+linux_pid_exe_is_elf_64_file (int pid, unsigned int *machine)
+{
+ char file[PATH_MAX];
+
+ sprintf (file, "/proc/%d/exe", pid);
+ return elf_64_file_p (file, machine);
}
static void
delete_lwp (struct lwp_info *lwp)
{
- remove_thread (get_lwp_thread (lwp));
- remove_inferior (&all_lwps, &lwp->head);
+ struct thread_info *thr = get_lwp_thread (lwp);
+
+ if (debug_threads)
+ debug_printf ("deleting %ld\n", lwpid_of (thr));
+
+ remove_thread (thr);
free (lwp->arch_private);
free (lwp);
}
{
struct process_info *proc;
- /* Is this the first process? If so, then set the arch. */
- if (all_processes.head == NULL)
- new_inferior = 1;
-
proc = add_process (pid, attached);
- proc->private = xcalloc (1, sizeof (*proc->private));
+ proc->priv = xcalloc (1, sizeof (*proc->priv));
+
+ /* Set the arch when the first LWP stops. */
+ proc->priv->new_inferior = 1;
if (the_low_target.new_process != NULL)
- proc->private->arch_private = the_low_target.new_process ();
+ proc->priv->arch_private = the_low_target.new_process ();
return proc;
}
-/* Remove a process from the common process list,
- also freeing all private data. */
-
-static void
-linux_remove_process (struct process_info *process)
-{
- struct process_info_private *priv = process->private;
-
- free (priv->arch_private);
- free (priv);
- remove_process (process);
-}
-
-/* Wrapper function for waitpid which handles EINTR, and emulates
- __WALL for systems where that is not available. */
-
-static int
-my_waitpid (int pid, int *status, int flags)
-{
- int ret, out_errno;
-
- if (debug_threads)
- fprintf (stderr, "my_waitpid (%d, 0x%x)\n", pid, flags);
-
- if (flags & __WALL)
- {
- sigset_t block_mask, org_mask, wake_mask;
- int wnohang;
-
- wnohang = (flags & WNOHANG) != 0;
- flags &= ~(__WALL | __WCLONE);
- flags |= WNOHANG;
-
- /* Block all signals while here. This avoids knowing about
- LinuxThread's signals. */
- sigfillset (&block_mask);
- sigprocmask (SIG_BLOCK, &block_mask, &org_mask);
-
- /* ... except during the sigsuspend below. */
- sigemptyset (&wake_mask);
-
- while (1)
- {
- /* Since all signals are blocked, there's no need to check
- for EINTR here. */
- ret = waitpid (pid, status, flags);
- out_errno = errno;
-
- if (ret == -1 && out_errno != ECHILD)
- break;
- else if (ret > 0)
- break;
-
- if (flags & __WCLONE)
- {
- /* We've tried both flavors now. If WNOHANG is set,
- there's nothing else to do, just bail out. */
- if (wnohang)
- break;
-
- if (debug_threads)
- fprintf (stderr, "blocking\n");
-
- /* Block waiting for signals. */
- sigsuspend (&wake_mask);
- }
-
- flags ^= __WCLONE;
- }
-
- sigprocmask (SIG_SETMASK, &org_mask, NULL);
- }
- else
- {
- do
- ret = waitpid (pid, status, flags);
- while (ret == -1 && errno == EINTR);
- out_errno = errno;
- }
-
- if (debug_threads)
- fprintf (stderr, "my_waitpid (%d, 0x%x): status(%x), %d\n",
- pid, flags, status ? *status : -1, ret);
-
- errno = out_errno;
- return ret;
-}
+static CORE_ADDR get_pc (struct lwp_info *lwp);
/* Handle a GNU/Linux extended wait response. If we see a clone
- event, we need to add the new LWP to our list (and not report the
- trap to higher layers). */
+ event, we need to add the new LWP to our list (and return 0 so as
+ not to report the trap to higher layers). */
-static void
-handle_extended_wait (struct lwp_info *event_child, int wstat)
+static int
+handle_extended_wait (struct lwp_info *event_lwp, int wstat)
{
- int event = wstat >> 16;
+ int event = linux_ptrace_get_extended_event (wstat);
+ struct thread_info *event_thr = get_lwp_thread (event_lwp);
struct lwp_info *new_lwp;
- if (event == PTRACE_EVENT_CLONE)
+ if ((event == PTRACE_EVENT_FORK) || (event == PTRACE_EVENT_CLONE))
{
ptid_t ptid;
unsigned long new_pid;
- int ret, status = W_STOPCODE (SIGSTOP);
+ int ret, status;
- ptrace (PTRACE_GETEVENTMSG, lwpid_of (event_child), 0, &new_pid);
+ /* Get the pid of the new lwp. */
+ ptrace (PTRACE_GETEVENTMSG, lwpid_of (event_thr), (PTRACE_TYPE_ARG3) 0,
+ &new_pid);
/* If we haven't already seen the new PID stop, wait for it now. */
- if (! pull_pid_from_list (&stopped_pids, new_pid))
+ if (!pull_pid_from_list (&stopped_pids, new_pid, &status))
{
/* The new child has a pending SIGSTOP. We can't affect it until it
hits the SIGSTOP, but we're already attached. */
warning ("wait returned unexpected status 0x%x", status);
}
- ptrace (PTRACE_SETOPTIONS, new_pid, 0, (PTRACE_ARG4_TYPE) PTRACE_O_TRACECLONE);
+ if (event == PTRACE_EVENT_FORK)
+ {
+ struct process_info *parent_proc;
+ struct process_info *child_proc;
+ struct lwp_info *child_lwp;
+ struct target_desc *tdesc;
+
+ ptid = ptid_build (new_pid, new_pid, 0);
+
+ if (debug_threads)
+ {
+ debug_printf ("HEW: Got fork event from LWP %ld, "
+ "new child is %d\n",
+ ptid_get_lwp (ptid_of (event_thr)),
+ ptid_get_pid (ptid));
+ }
+
+ /* Add the new process to the tables and clone the breakpoint
+ lists of the parent. We need to do this even if the new process
+ will be detached, since we will need the process object and the
+ breakpoints to remove any breakpoints from memory when we
+ detach, and the client side will access registers. */
+ child_proc = linux_add_process (new_pid, 0);
+ gdb_assert (child_proc != NULL);
+ child_lwp = add_lwp (ptid);
+ gdb_assert (child_lwp != NULL);
+ child_lwp->stopped = 1;
+ parent_proc = get_thread_process (event_thr);
+ child_proc->attached = parent_proc->attached;
+ clone_all_breakpoints (&child_proc->breakpoints,
+ &child_proc->raw_breakpoints,
+ parent_proc->breakpoints);
+
+ tdesc = xmalloc (sizeof (struct target_desc));
+ copy_target_description (tdesc, parent_proc->tdesc);
+ child_proc->tdesc = tdesc;
+ child_lwp->must_set_ptrace_flags = 1;
+
+ /* Clone arch-specific process data. */
+ if (the_low_target.new_fork != NULL)
+ the_low_target.new_fork (parent_proc, child_proc);
+
+ /* Save fork info in the parent thread. */
+ event_lwp->waitstatus.kind = TARGET_WAITKIND_FORKED;
+ event_lwp->waitstatus.value.related_pid = ptid;
+ /* The status_pending field contains bits denoting the
+ extended event, so when the pending event is handled,
+ the handler will look at lwp->waitstatus. */
+ event_lwp->status_pending_p = 1;
+ event_lwp->status_pending = wstat;
+
+ /* Report the event. */
+ return 0;
+ }
+
+ if (debug_threads)
+ debug_printf ("HEW: Got clone event "
+ "from LWP %ld, new child is LWP %ld\n",
+ lwpid_of (event_thr), new_pid);
- ptid = ptid_build (pid_of (event_child), new_pid, 0);
- new_lwp = (struct lwp_info *) add_lwp (ptid);
- add_thread (ptid, new_lwp);
+ ptid = ptid_build (pid_of (event_thr), new_pid, 0);
+ new_lwp = add_lwp (ptid);
/* Either we're going to immediately resume the new thread
or leave it stopped. linux_resume_one_lwp is a nop if it
before calling linux_resume_one_lwp. */
new_lwp->stopped = 1;
+ /* If we're suspending all threads, leave this one suspended
+ too. */
+ if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS)
+ new_lwp->suspended = 1;
+
/* Normally we will get the pending SIGSTOP. But in some cases
we might get another signal delivered to the group first.
If we do get another signal, be sure not to lose it. */
- if (WSTOPSIG (status) == SIGSTOP)
- {
- if (! stopping_threads)
- linux_resume_one_lwp (new_lwp, 0, 0, NULL);
- }
- else
+ if (WSTOPSIG (status) != SIGSTOP)
{
new_lwp->stop_expected = 1;
- if (stopping_threads)
- {
- new_lwp->status_pending_p = 1;
- new_lwp->status_pending = status;
- }
- else
- /* Pass the signal on. This is what GDB does - except
- shouldn't we really report it instead? */
- linux_resume_one_lwp (new_lwp, 0, WSTOPSIG (status), NULL);
+ new_lwp->status_pending_p = 1;
+ new_lwp->status_pending = status;
}
- /* Always resume the current thread. If we are stopping
- threads, it will have a pending SIGSTOP; we may as well
- collect it now. */
- linux_resume_one_lwp (event_child, event_child->stepping, 0, NULL);
+ /* Don't report the event. */
+ return 1;
}
+
+ internal_error (__FILE__, __LINE__, _("unknown ptrace event %d"), event);
+}
+
+/* Return the PC as read from the regcache of LWP, without any
+ adjustment. */
+
+static CORE_ADDR
+get_pc (struct lwp_info *lwp)
+{
+ struct thread_info *saved_thread;
+ struct regcache *regcache;
+ CORE_ADDR pc;
+
+ if (the_low_target.get_pc == NULL)
+ return 0;
+
+ saved_thread = current_thread;
+ current_thread = get_lwp_thread (lwp);
+
+ regcache = get_thread_regcache (current_thread, 1);
+ pc = (*the_low_target.get_pc) (regcache);
+
+ if (debug_threads)
+ debug_printf ("pc is 0x%lx\n", (long) pc);
+
+ current_thread = saved_thread;
+ return pc;
}
-/* This function should only be called if the process got a SIGTRAP.
+/* This function should only be called if LWP got a SIGTRAP.
The SIGTRAP could mean several things.
On i386, where decr_pc_after_break is non-zero:
- If we were single-stepping this process using PTRACE_SINGLESTEP,
- we will get only the one SIGTRAP (even if the instruction we
- stepped over was a breakpoint). The value of $eip will be the
- next instruction.
+
+ If we were single-stepping this process using PTRACE_SINGLESTEP, we
+ will get only the one SIGTRAP. The value of $eip will be the next
+ instruction. If the instruction we stepped over was a breakpoint,
+ we need to decrement the PC.
+
If we continue the process using PTRACE_CONT, we will get a
SIGTRAP when we hit a breakpoint. The value of $eip will be
the instruction after the breakpoint (i.e. needs to be
decremented). If we report the SIGTRAP to GDB, we must also
- report the undecremented PC. If we cancel the SIGTRAP, we
+ report the undecremented PC. If the breakpoint is removed, we
must resume at the decremented PC.
- (Presumably, not yet tested) On a non-decr_pc_after_break machine
- with hardware or kernel single-step:
- If we single-step over a breakpoint instruction, our PC will
- point at the following instruction. If we continue and hit a
- breakpoint instruction, our PC will point at the breakpoint
+ On a non-decr_pc_after_break machine with hardware or kernel
+ single-step:
+
+ If we either single-step a breakpoint instruction, or continue and
+ hit a breakpoint instruction, our PC will point at the breakpoint
instruction. */
-static CORE_ADDR
-get_stop_pc (void)
+static int
+check_stopped_by_breakpoint (struct lwp_info *lwp)
{
- struct regcache *regcache = get_thread_regcache (current_inferior, 1);
- CORE_ADDR stop_pc = (*the_low_target.get_pc) (regcache);
+ CORE_ADDR pc;
+ CORE_ADDR sw_breakpoint_pc;
+ struct thread_info *saved_thread;
+#if USE_SIGTRAP_SIGINFO
+ siginfo_t siginfo;
+#endif
- if (! get_thread_lwp (current_inferior)->stepping)
- stop_pc -= the_low_target.decr_pc_after_break;
+ if (the_low_target.get_pc == NULL)
+ return 0;
- if (debug_threads)
- fprintf (stderr, "stop pc is 0x%lx\n", (long) stop_pc);
+ pc = get_pc (lwp);
+ sw_breakpoint_pc = pc - the_low_target.decr_pc_after_break;
+
+ /* breakpoint_at reads from the current thread. */
+ saved_thread = current_thread;
+ current_thread = get_lwp_thread (lwp);
+
+#if USE_SIGTRAP_SIGINFO
+ if (ptrace (PTRACE_GETSIGINFO, lwpid_of (current_thread),
+ (PTRACE_TYPE_ARG3) 0, &siginfo) == 0)
+ {
+ if (siginfo.si_signo == SIGTRAP)
+ {
+ if (siginfo.si_code == GDB_ARCH_TRAP_BRKPT)
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
+
+ debug_printf ("CSBB: %s stopped by software breakpoint\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
+
+ /* Back up the PC if necessary. */
+ if (pc != sw_breakpoint_pc)
+ {
+ struct regcache *regcache
+ = get_thread_regcache (current_thread, 1);
+ (*the_low_target.set_pc) (regcache, sw_breakpoint_pc);
+ }
+
+ lwp->stop_pc = sw_breakpoint_pc;
+ lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
+ current_thread = saved_thread;
+ return 1;
+ }
+ else if (siginfo.si_code == TRAP_HWBKPT)
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
+
+ debug_printf ("CSBB: %s stopped by hardware "
+ "breakpoint/watchpoint\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
+
+ lwp->stop_pc = pc;
+ lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT;
+ current_thread = saved_thread;
+ return 1;
+ }
+ else if (siginfo.si_code == TRAP_TRACE)
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
+
+ debug_printf ("CSBB: %s stopped by trace\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
+ }
+ }
+ }
+#else
+ /* We may have just stepped a breakpoint instruction. E.g., in
+ non-stop mode, GDB first tells the thread A to step a range, and
+ then the user inserts a breakpoint inside the range. In that
+ case we need to report the breakpoint PC. */
+ if ((!lwp->stepping || lwp->stop_pc == sw_breakpoint_pc)
+ && (*the_low_target.breakpoint_at) (sw_breakpoint_pc))
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
+
+ debug_printf ("CSBB: %s stopped by software breakpoint\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
+
+ /* Back up the PC if necessary. */
+ if (pc != sw_breakpoint_pc)
+ {
+ struct regcache *regcache
+ = get_thread_regcache (current_thread, 1);
+ (*the_low_target.set_pc) (regcache, sw_breakpoint_pc);
+ }
- return stop_pc;
+ lwp->stop_pc = sw_breakpoint_pc;
+ lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT;
+ current_thread = saved_thread;
+ return 1;
+ }
+
+ if (hardware_breakpoint_inserted_here (pc))
+ {
+ if (debug_threads)
+ {
+ struct thread_info *thr = get_lwp_thread (lwp);
+
+ debug_printf ("CSBB: %s stopped by hardware breakpoint\n",
+ target_pid_to_str (ptid_of (thr)));
+ }
+
+ lwp->stop_pc = pc;
+ lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT;
+ current_thread = saved_thread;
+ return 1;
+ }
+#endif
+
+ current_thread = saved_thread;
+ return 0;
}
-static void *
+static struct lwp_info *
add_lwp (ptid_t ptid)
{
struct lwp_info *lwp;
lwp = (struct lwp_info *) xmalloc (sizeof (*lwp));
memset (lwp, 0, sizeof (*lwp));
- lwp->head.id = ptid;
-
if (the_low_target.new_thread != NULL)
- lwp->arch_private = the_low_target.new_thread ();
+ the_low_target.new_thread (lwp);
- add_inferior_to_list (&all_lwps, &lwp->head);
+ lwp->thread = add_thread (ptid, lwp);
return lwp;
}
struct lwp_info *new_lwp;
int pid;
ptid_t ptid;
+ struct cleanup *restore_personality
+ = maybe_disable_address_space_randomization (disable_randomization);
#if defined(__UCLIBC__) && defined(HAS_NOMMU)
pid = vfork ();
if (pid == 0)
{
- ptrace (PTRACE_TRACEME, 0, 0, 0);
+ close_most_fds ();
+ ptrace (PTRACE_TRACEME, 0, (PTRACE_TYPE_ARG3) 0, (PTRACE_TYPE_ARG4) 0);
-#ifdef __SIGRTMIN /* Bionic doesn't use SIGRTMIN the way glibc does. */
+#ifndef __ANDROID__ /* Bionic doesn't use SIGRTMIN the way glibc does. */
signal (__SIGRTMIN + 1, SIG_DFL);
#endif
setpgid (0, 0);
+ /* If gdbserver is connected to gdb via stdio, redirect the inferior's
+ stdout to stderr so that inferior i/o doesn't corrupt the connection.
+ Also, redirect stdin to /dev/null. */
+ if (remote_connection_is_stdio ())
+ {
+ close (0);
+ open ("/dev/null", O_RDONLY);
+ dup2 (2, 1);
+ if (write (2, "stdin/stdout redirected\n",
+ sizeof ("stdin/stdout redirected\n") - 1) < 0)
+ {
+ /* Errors ignored. */;
+ }
+ }
+
execv (program, allargs);
if (errno == ENOENT)
execvp (program, allargs);
_exit (0177);
}
+ do_cleanups (restore_personality);
+
linux_add_process (pid, 0);
ptid = ptid_build (pid, pid, 0);
new_lwp = add_lwp (ptid);
- add_thread (ptid, new_lwp);
new_lwp->must_set_ptrace_flags = 1;
return pid;
}
-/* Attach to an inferior process. */
+/* Attach to an inferior process. Returns 0 on success, ERRNO on
+ error. */
-static void
-linux_attach_lwp_1 (unsigned long lwpid, int initial)
+int
+linux_attach_lwp (ptid_t ptid)
{
- ptid_t ptid;
struct lwp_info *new_lwp;
+ int lwpid = ptid_get_lwp (ptid);
- if (ptrace (PTRACE_ATTACH, lwpid, 0, 0) != 0)
- {
- if (!initial)
- {
- /* If we fail to attach to an LWP, just warn. */
- fprintf (stderr, "Cannot attach to lwp %ld: %s (%d)\n", lwpid,
- strerror (errno), errno);
- fflush (stderr);
- return;
- }
- else
- /* If we fail to attach to a process, report an error. */
- error ("Cannot attach to lwp %ld: %s (%d)\n", lwpid,
- strerror (errno), errno);
- }
-
- if (initial)
- /* NOTE/FIXME: This lwp might have not been the tgid. */
- ptid = ptid_build (lwpid, lwpid, 0);
- else
- {
- /* Note that extracting the pid from the current inferior is
- safe, since we're always called in the context of the same
- process as this new thread. */
- int pid = pid_of (get_thread_lwp (current_inferior));
- ptid = ptid_build (pid, lwpid, 0);
- }
+ if (ptrace (PTRACE_ATTACH, lwpid, (PTRACE_TYPE_ARG3) 0, (PTRACE_TYPE_ARG4) 0)
+ != 0)
+ return errno;
- new_lwp = (struct lwp_info *) add_lwp (ptid);
- add_thread (ptid, new_lwp);
+ new_lwp = add_lwp (ptid);
/* We need to wait for SIGSTOP before being able to make the next
ptrace call on this LWP. */
new_lwp->must_set_ptrace_flags = 1;
+ if (linux_proc_pid_is_stopped (lwpid))
+ {
+ if (debug_threads)
+ debug_printf ("Attached to a stopped process\n");
+
+ /* The process is definitely stopped. It is in a job control
+ stop, unless the kernel predates the TASK_STOPPED /
+ TASK_TRACED distinction, in which case it might be in a
+ ptrace stop. Make sure it is in a ptrace stop; from there we
+ can kill it, signal it, et cetera.
+
+ First make sure there is a pending SIGSTOP. Since we are
+ already attached, the process can not transition from stopped
+ to running without a PTRACE_CONT; so we know this signal will
+ go into the queue. The SIGSTOP generated by PTRACE_ATTACH is
+ probably already in the queue (unless this kernel is old
+ enough to use TASK_STOPPED for ptrace stops); but since
+ SIGSTOP is not an RT signal, it can only be queued once. */
+ kill_lwp (lwpid, SIGSTOP);
+
+ /* Finally, resume the stopped process. This will deliver the
+ SIGSTOP (or a higher priority signal, just like normal
+ PTRACE_ATTACH), which we'll catch later on. */
+ ptrace (PTRACE_CONT, lwpid, (PTRACE_TYPE_ARG3) 0, (PTRACE_TYPE_ARG4) 0);
+ }
+
/* The next time we wait for this LWP we'll see a SIGSTOP as PTRACE_ATTACH
brings it to a halt.
1) gdbserver has already attached to the process and is being notified
of a new thread that is being created.
- In this case we should ignore that SIGSTOP and resume the process.
- This is handled below by setting stop_expected = 1.
+ In this case we should ignore that SIGSTOP and resume the
+ process. This is handled below by setting stop_expected = 1,
+ and the fact that add_thread sets last_resume_kind ==
+ resume_continue.
2) This is the first thread (the process thread), and we're attaching
to it via attach_inferior.
In this case we want the process thread to stop.
- This is handled by having linux_attach clear stop_expected after
- we return.
- ??? If the process already has several threads we leave the other
- threads running.
+ This is handled by having linux_attach set last_resume_kind ==
+ resume_stop after we return.
+
+ If the pid we are attaching to is also the tgid, we attach to and
+ stop all the existing threads. Otherwise, we attach to pid and
+ ignore any other threads in the same group as this pid.
3) GDB is connecting to gdbserver and is requesting an enumeration of all
existing threads.
because we are guaranteed that the add_lwp call above added us to the
end of the list, and so the new thread has not yet reached
wait_for_sigstop (but will). */
- if (! stopping_threads)
- new_lwp->stop_expected = 1;
+ new_lwp->stop_expected = 1;
+
+ return 0;
}
-void
-linux_attach_lwp (unsigned long lwpid)
+/* Callback for linux_proc_attach_tgid_threads. Attach to PTID if not
+ already attached. Returns true if a new LWP is found, false
+ otherwise. */
+
+static int
+attach_proc_task_lwp_callback (ptid_t ptid)
{
- linux_attach_lwp_1 (lwpid, 0);
+ /* Is this a new thread? */
+ if (find_thread_ptid (ptid) == NULL)
+ {
+ int lwpid = ptid_get_lwp (ptid);
+ int err;
+
+ if (debug_threads)
+ debug_printf ("Found new lwp %d\n", lwpid);
+
+ err = linux_attach_lwp (ptid);
+
+ /* Be quiet if we simply raced with the thread exiting. EPERM
+ is returned if the thread's task still exists, and is marked
+ as exited or zombie, as well as other conditions, so in that
+ case, confirm the status in /proc/PID/status. */
+ if (err == ESRCH
+ || (err == EPERM && linux_proc_pid_is_gone (lwpid)))
+ {
+ if (debug_threads)
+ {
+ debug_printf ("Cannot attach to lwp %d: "
+ "thread is gone (%d: %s)\n",
+ lwpid, err, strerror (err));
+ }
+ }
+ else if (err != 0)
+ {
+ warning (_("Cannot attach to lwp %d: %s"),
+ lwpid,
+ linux_ptrace_attach_fail_reason_string (ptid, err));
+ }
+
+ return 1;
+ }
+ return 0;
}
-int
+/* Attach to PID. If PID is the tgid, attach to it and all
+ of its threads. */
+
+static int
linux_attach (unsigned long pid)
{
- struct lwp_info *lwp;
+ ptid_t ptid = ptid_build (pid, pid, 0);
+ int err;
- linux_attach_lwp_1 (pid, 1);
+ /* Attach to PID. We will check for other threads
+ soon. */
+ err = linux_attach_lwp (ptid);
+ if (err != 0)
+ error ("Cannot attach to process %ld: %s",
+ pid, linux_ptrace_attach_fail_reason_string (ptid, err));
linux_add_process (pid, 1);
if (!non_stop)
{
- /* Don't ignore the initial SIGSTOP if we just attached to this
- process. It will be collected by wait shortly. */
- lwp = (struct lwp_info *) find_inferior_id (&all_lwps,
- ptid_build (pid, pid, 0));
- lwp->stop_expected = 0;
+ struct thread_info *thread;
+
+ /* Don't ignore the initial SIGSTOP if we just attached to this
+ process. It will be collected by wait shortly. */
+ thread = find_thread_ptid (ptid_build (pid, pid, 0));
+ thread->last_resume_kind = resume_stop;
}
+ /* We must attach to every LWP. If /proc is mounted, use that to
+ find them now. On the one hand, the inferior may be using raw
+ clone instead of using pthreads. On the other hand, even if it
+ is using pthreads, GDB may not be connected yet (thread_db needs
+ to do symbol lookups, through qSymbol). Also, thread_db walks
+ structures in the inferior's address space to find the list of
+ threads/LWPs, and those structures may well be corrupted. Note
+ that once thread_db is loaded, we'll still use it to list threads
+ and associate pthread info with each LWP. */
+ linux_proc_attach_tgid_threads (pid, attach_proc_task_lwp_callback);
return 0;
}
}
static int
-last_thread_of_process_p (struct thread_info *thread)
+last_thread_of_process_p (int pid)
{
- ptid_t ptid = ((struct inferior_list_entry *)thread)->id;
- int pid = ptid_get_pid (ptid);
struct counter counter = { pid , 0 };
return (find_inferior (&all_threads,
second_thread_of_pid_p, &counter) == NULL);
}
-/* Kill the inferior lwp. */
+/* Kill LWP. */
+
+static void
+linux_kill_one_lwp (struct lwp_info *lwp)
+{
+ struct thread_info *thr = get_lwp_thread (lwp);
+ int pid = lwpid_of (thr);
+
+ /* PTRACE_KILL is unreliable. After stepping into a signal handler,
+ there is no signal context, and ptrace(PTRACE_KILL) (or
+ ptrace(PTRACE_CONT, SIGKILL), pretty much the same) acts like
+ ptrace(CONT, pid, 0,0) and just resumes the tracee. A better
+ alternative is to kill with SIGKILL. We only need one SIGKILL
+ per process, not one for each thread. But since we still support
+ linuxthreads, and we also support debugging programs using raw
+ clone without CLONE_THREAD, we send one for each thread. For
+ years, we used PTRACE_KILL only, so we're being a bit paranoid
+ about some old kernels where PTRACE_KILL might work better
+ (dubious if there are any such, but that's why it's paranoia), so
+ we try SIGKILL first, PTRACE_KILL second, and so we're fine
+ everywhere. */
+
+ errno = 0;
+ kill_lwp (pid, SIGKILL);
+ if (debug_threads)
+ {
+ int save_errno = errno;
+
+ debug_printf ("LKL: kill_lwp (SIGKILL) %s, 0, 0 (%s)\n",
+ target_pid_to_str (ptid_of (thr)),
+ save_errno ? strerror (save_errno) : "OK");
+ }
+
+ errno = 0;
+ ptrace (PTRACE_KILL, pid, (PTRACE_TYPE_ARG3) 0, (PTRACE_TYPE_ARG4) 0);
+ if (debug_threads)
+ {
+ int save_errno = errno;
+
+ debug_printf ("LKL: PTRACE_KILL %s, 0, 0 (%s)\n",
+ target_pid_to_str (ptid_of (thr)),
+ save_errno ? strerror (save_errno) : "OK");
+ }
+}
+
+/* Kill LWP and wait for it to die. */
+
+static void
+kill_wait_lwp (struct lwp_info *lwp)
+{
+ struct thread_info *thr = get_lwp_thread (lwp);
+ int pid = ptid_get_pid (ptid_of (thr));
+ int lwpid = ptid_get_lwp (ptid_of (thr));
+ int wstat;
+ int res;
+
+ if (debug_threads)
+ debug_printf ("kwl: killing lwp %d, for pid: %d\n", lwpid, pid);
+
+ do
+ {
+ linux_kill_one_lwp (lwp);
+
+ /* Make sure it died. Notes:
+
+ - The loop is most likely unnecessary.
+
+ - We don't use linux_wait_for_event as that could delete lwps
+ while we're iterating over them. We're not interested in
+ any pending status at this point, only in making sure all
+ wait status on the kernel side are collected until the
+ process is reaped.
+
+ - We don't use __WALL here as the __WALL emulation relies on
+ SIGCHLD, and killing a stopped process doesn't generate
+ one, nor an exit status.
+ */
+ res = my_waitpid (lwpid, &wstat, 0);
+ if (res == -1 && errno == ECHILD)
+ res = my_waitpid (lwpid, &wstat, __WCLONE);
+ } while (res > 0 && WIFSTOPPED (wstat));
+
+ gdb_assert (res > 0);
+}
+
+/* Callback for `find_inferior'. Kills an lwp of a given process,
+ except the leader. */
static int
-linux_kill_one_lwp (struct inferior_list_entry *entry, void *args)
+kill_one_lwp_callback (struct inferior_list_entry *entry, void *args)
{
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lwp = get_thread_lwp (thread);
- int wstat;
int pid = * (int *) args;
if (ptid_get_pid (entry->id) != pid)
the children get a chance to be reaped, it will remain a zombie
forever. */
- if (lwpid_of (lwp) == pid)
+ if (lwpid_of (thread) == pid)
{
if (debug_threads)
- fprintf (stderr, "lkop: is last of process %s\n",
- target_pid_to_str (entry->id));
+ debug_printf ("lkop: is last of process %s\n",
+ target_pid_to_str (entry->id));
return 0;
}
- /* If we're killing a running inferior, make sure it is stopped
- first, as PTRACE_KILL will not work otherwise. */
- if (!lwp->stopped)
- send_sigstop (&lwp->head);
-
- do
- {
- ptrace (PTRACE_KILL, lwpid_of (lwp), 0, 0);
-
- /* Make sure it died. The loop is most likely unnecessary. */
- pid = linux_wait_for_event (lwp->head.id, &wstat, __WALL);
- } while (pid > 0 && WIFSTOPPED (wstat));
-
+ kill_wait_lwp (lwp);
return 0;
}
{
struct process_info *process;
struct lwp_info *lwp;
- struct thread_info *thread;
- int wstat;
- int lwpid;
process = find_process_pid (pid);
if (process == NULL)
return -1;
- find_inferior (&all_threads, linux_kill_one_lwp, &pid);
+ /* If we're killing a running inferior, make sure it is stopped
+ first, as PTRACE_KILL will not work otherwise. */
+ stop_all_lwps (0, NULL);
+
+ find_inferior (&all_threads, kill_one_lwp_callback , &pid);
/* See the comment in linux_kill_one_lwp. We did not kill the first
thread in the list, so do so now. */
lwp = find_lwp_pid (pid_to_ptid (pid));
- thread = get_lwp_thread (lwp);
-
- if (debug_threads)
- fprintf (stderr, "lk_1: killing lwp %ld, for pid: %d\n",
- lwpid_of (lwp), pid);
-
- /* If we're killing a running inferior, make sure it is stopped
- first, as PTRACE_KILL will not work otherwise. */
- if (!lwp->stopped)
- send_sigstop (&lwp->head);
- do
+ if (lwp == NULL)
{
- ptrace (PTRACE_KILL, lwpid_of (lwp), 0, 0);
+ if (debug_threads)
+ debug_printf ("lk_1: cannot find lwp for pid: %d\n",
+ pid);
+ }
+ else
+ kill_wait_lwp (lwp);
- /* Make sure it died. The loop is most likely unnecessary. */
- lwpid = linux_wait_for_event (lwp->head.id, &wstat, __WALL);
- } while (lwpid > 0 && WIFSTOPPED (wstat));
+ the_target->mourn (process);
-#ifdef USE_THREAD_DB
- thread_db_free (process, 0);
-#endif
- delete_lwp (lwp);
- linux_remove_process (process);
+ /* Since we presently can only stop all lwps of all processes, we
+ need to unstop lwps of other processes. */
+ unstop_all_lwps (0, NULL);
return 0;
}
+/* Get pending signal of THREAD, for detaching purposes. This is the
+ signal the thread last stopped for, which we need to deliver to the
+ thread when detaching, otherwise, it'd be suppressed/lost. */
+
static int
-linux_detach_one_lwp (struct inferior_list_entry *entry, void *args)
+get_detach_signal (struct thread_info *thread)
{
- struct thread_info *thread = (struct thread_info *) entry;
- struct lwp_info *lwp = get_thread_lwp (thread);
- int pid = * (int *) args;
+ enum gdb_signal signo = GDB_SIGNAL_0;
+ int status;
+ struct lwp_info *lp = get_thread_lwp (thread);
- if (ptid_get_pid (entry->id) != pid)
- return 0;
+ if (lp->status_pending_p)
+ status = lp->status_pending;
+ else
+ {
+ /* If the thread had been suspended by gdbserver, and it stopped
+ cleanly, then it'll have stopped with SIGSTOP. But we don't
+ want to deliver that SIGSTOP. */
+ if (thread->last_status.kind != TARGET_WAITKIND_STOPPED
+ || thread->last_status.value.sig == GDB_SIGNAL_0)
+ return 0;
- /* If we're detaching from a running inferior, make sure it is
- stopped first, as PTRACE_DETACH will not work otherwise. */
- if (!lwp->stopped)
+ /* Otherwise, we may need to deliver the signal we
+ intercepted. */
+ status = lp->last_status;
+ }
+
+ if (!WIFSTOPPED (status))
+ {
+ if (debug_threads)
+ debug_printf ("GPS: lwp %s hasn't stopped: no pending signal\n",
+ target_pid_to_str (ptid_of (thread)));
+ return 0;
+ }
+
+ /* Extended wait statuses aren't real SIGTRAPs. */
+ if (WSTOPSIG (status) == SIGTRAP && linux_is_extended_waitstatus (status))
{
- int lwpid = lwpid_of (lwp);
+ if (debug_threads)
+ debug_printf ("GPS: lwp %s had stopped with extended "
+ "status: no pending signal\n",
+ target_pid_to_str (ptid_of (thread)));
+ return 0;
+ }
- stopping_threads = 1;
- send_sigstop (&lwp->head);
+ signo = gdb_signal_from_host (WSTOPSIG (status));
- /* If this detects a new thread through a clone event, the new
- thread is appended to the end of the lwp list, so we'll
- eventually detach from it. */
- wait_for_sigstop (&lwp->head);
- stopping_threads = 0;
+ if (program_signals_p && !program_signals[signo])
+ {
+ if (debug_threads)
+ debug_printf ("GPS: lwp %s had signal %s, but it is in nopass state\n",
+ target_pid_to_str (ptid_of (thread)),
+ gdb_signal_to_string (signo));
+ return 0;
+ }
+ else if (!program_signals_p
+ /* If we have no way to know which signals GDB does not
+ want to have passed to the program, assume
+ SIGTRAP/SIGINT, which is GDB's default. */
+ && (signo == GDB_SIGNAL_TRAP || signo == GDB_SIGNAL_INT))
+ {
+ if (debug_threads)
+ debug_printf ("GPS: lwp %s had signal %s, "
+ "but we don't know if we should pass it. "
+ "Default to not.\n",
+ target_pid_to_str (ptid_of (thread)),
+ gdb_signal_to_string (signo));
+ return 0;
+ }
+ else
+ {
+ if (debug_threads)
+ debug_printf ("GPS: lwp %s has pending signal %s: delivering it.\n",
+ target_pid_to_str (ptid_of (thread)),
+ gdb_signal_to_string (signo));
- /* If LWP exits while we're trying to stop it, there's nothing
- left to do. */
- lwp = find_lwp_pid (pid_to_ptid (lwpid));
- if (lwp == NULL)
- return 0;
+ return WSTOPSIG (status);
}
+}
+
+static int
+linux_detach_one_lwp (struct inferior_list_entry *entry, void *args)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ int pid = * (int *) args;
+ int sig;
- /* Make sure the process isn't stopped at a breakpoint that's
- no longer there. */
- check_removed_breakpoint (lwp);
+ if (ptid_get_pid (entry->id) != pid)
+ return 0;
- /* If this process is stopped but is expecting a SIGSTOP, then make
- sure we take care of that now. This isn't absolutely guaranteed
- to collect the SIGSTOP, but is fairly likely to. */
+ /* If there is a pending SIGSTOP, get rid of it. */
if (lwp->stop_expected)
{
- int wstat;
- /* Clear stop_expected, so that the SIGSTOP will be reported. */
+ if (debug_threads)
+ debug_printf ("Sending SIGCONT to %s\n",
+ target_pid_to_str (ptid_of (thread)));
+
+ kill_lwp (lwpid_of (thread), SIGCONT);
lwp->stop_expected = 0;
- if (lwp->stopped)
- linux_resume_one_lwp (lwp, 0, 0, NULL);
- linux_wait_for_event (lwp->head.id, &wstat, __WALL);
}
/* Flush any pending changes to the process's registers. */
- regcache_invalidate_one ((struct inferior_list_entry *)
- get_lwp_thread (lwp));
+ regcache_invalidate_thread (thread);
+
+ /* Pass on any pending signal for this thread. */
+ sig = get_detach_signal (thread);
/* Finally, let it resume. */
- ptrace (PTRACE_DETACH, lwpid_of (lwp), 0, 0);
+ if (the_low_target.prepare_to_resume != NULL)
+ the_low_target.prepare_to_resume (lwp);
+ if (ptrace (PTRACE_DETACH, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
+ (PTRACE_TYPE_ARG4) (long) sig) < 0)
+ error (_("Can't detach %s: %s"),
+ target_pid_to_str (ptid_of (thread)),
+ strerror (errno));
delete_lwp (lwp);
return 0;
}
-static int
-any_thread_of (struct inferior_list_entry *entry, void *args)
-{
- int *pid_p = args;
-
- if (ptid_get_pid (entry->id) == *pid_p)
- return 1;
-
- return 0;
-}
-
static int
linux_detach (int pid)
{
if (process == NULL)
return -1;
+ /* Stop all threads before detaching. First, ptrace requires that
+ the thread is stopped to sucessfully detach. Second, thread_db
+ may need to uninstall thread event breakpoints from memory, which
+ only works with a stopped process anyway. */
+ stop_all_lwps (0, NULL);
+
#ifdef USE_THREAD_DB
- thread_db_free (process, 1);
+ thread_db_detach (process);
#endif
- current_inferior =
- (struct thread_info *) find_inferior (&all_threads, any_thread_of, &pid);
+ /* Stabilize threads (move out of jump pads). */
+ stabilize_threads ();
- delete_all_breakpoints ();
find_inferior (&all_threads, linux_detach_one_lwp, &pid);
- linux_remove_process (process);
+
+ the_target->mourn (process);
+
+ /* Since we presently can only stop all lwps of all processes, we
+ need to unstop lwps of other processes. */
+ unstop_all_lwps (0, NULL);
+ return 0;
+}
+
+/* Remove all LWPs that belong to process PROC from the lwp list. */
+
+static int
+delete_lwp_callback (struct inferior_list_entry *entry, void *proc)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ struct process_info *process = proc;
+
+ if (pid_of (thread) == pid_of (process))
+ delete_lwp (lwp);
+
return 0;
}
+static void
+linux_mourn (struct process_info *process)
+{
+ struct process_info_private *priv;
+
+#ifdef USE_THREAD_DB
+ thread_db_mourn (process);
+#endif
+
+ find_inferior (&all_threads, delete_lwp_callback, process);
+
+ /* Freeing all private data. */
+ priv = process->priv;
+ free (priv->arch_private);
+ free (priv);
+ process->priv = NULL;
+
+ remove_process (process);
+}
+
static void
linux_join (int pid)
{
int status, ret;
- struct process_info *process;
-
- process = find_process_pid (pid);
- if (process == NULL)
- return;
do {
ret = my_waitpid (pid, &status, 0);
return 0;
}
-/* Return nonzero if this process stopped at a breakpoint which
- no longer appears to be inserted. Also adjust the PC
- appropriately to resume where the breakpoint used to be. */
+/* Return 1 if this lwp still has an interesting status pending. If
+ not (e.g., it had stopped for a breakpoint that is gone), return
+ false. */
+
static int
-check_removed_breakpoint (struct lwp_info *event_child)
+thread_still_has_status_pending_p (struct thread_info *thread)
{
- CORE_ADDR stop_pc;
- struct thread_info *saved_inferior;
- struct regcache *regcache;
+ struct lwp_info *lp = get_thread_lwp (thread);
- if (event_child->pending_is_breakpoint == 0)
+ if (!lp->status_pending_p)
return 0;
- if (debug_threads)
- fprintf (stderr, "Checking for breakpoint in lwp %ld.\n",
- lwpid_of (event_child));
-
- saved_inferior = current_inferior;
- current_inferior = get_lwp_thread (event_child);
- regcache = get_thread_regcache (current_inferior, 1);
- stop_pc = get_stop_pc ();
+ /* If we got a `vCont;t', but we haven't reported a stop yet, do
+ report any status pending the LWP may have. */
+ if (thread->last_resume_kind == resume_stop
+ && thread->last_status.kind != TARGET_WAITKIND_IGNORE)
+ return 0;
- /* If the PC has changed since we stopped, then we shouldn't do
- anything. This happens if, for instance, GDB handled the
- decr_pc_after_break subtraction itself. */
- if (stop_pc != event_child->pending_stop_pc)
+ if (thread->last_resume_kind != resume_stop
+ && (lp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
+ || lp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT))
{
- if (debug_threads)
- fprintf (stderr, "Ignoring, PC was changed. Old PC was 0x%08llx\n",
- event_child->pending_stop_pc);
+ struct thread_info *saved_thread;
+ CORE_ADDR pc;
+ int discard = 0;
- event_child->pending_is_breakpoint = 0;
- current_inferior = saved_inferior;
- return 0;
- }
+ gdb_assert (lp->last_status != 0);
- /* If the breakpoint is still there, we will report hitting it. */
- if ((*the_low_target.breakpoint_at) (stop_pc))
- {
- if (debug_threads)
- fprintf (stderr, "Ignoring, breakpoint is still present.\n");
- current_inferior = saved_inferior;
- return 0;
- }
+ pc = get_pc (lp);
- if (debug_threads)
- fprintf (stderr, "Removed breakpoint.\n");
+ saved_thread = current_thread;
+ current_thread = thread;
- /* For decr_pc_after_break targets, here is where we perform the
- decrement. We go immediately from this function to resuming,
- and can not safely call get_stop_pc () again. */
- if (the_low_target.set_pc != NULL)
- {
- if (debug_threads)
- fprintf (stderr, "Set pc to 0x%lx\n", (long) stop_pc);
- (*the_low_target.set_pc) (regcache, stop_pc);
- }
+ if (pc != lp->stop_pc)
+ {
+ if (debug_threads)
+ debug_printf ("PC of %ld changed\n",
+ lwpid_of (thread));
+ discard = 1;
+ }
+
+#if !USE_SIGTRAP_SIGINFO
+ else if (lp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
+ && !(*the_low_target.breakpoint_at) (pc))
+ {
+ if (debug_threads)
+ debug_printf ("previous SW breakpoint of %ld gone\n",
+ lwpid_of (thread));
+ discard = 1;
+ }
+ else if (lp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT
+ && !hardware_breakpoint_inserted_here (pc))
+ {
+ if (debug_threads)
+ debug_printf ("previous HW breakpoint of %ld gone\n",
+ lwpid_of (thread));
+ discard = 1;
+ }
+#endif
- /* We consumed the pending SIGTRAP. */
- event_child->pending_is_breakpoint = 0;
- event_child->status_pending_p = 0;
- event_child->status_pending = 0;
+ current_thread = saved_thread;
+
+ if (discard)
+ {
+ if (debug_threads)
+ debug_printf ("discarding pending breakpoint status\n");
+ lp->status_pending_p = 0;
+ return 0;
+ }
+ }
- current_inferior = saved_inferior;
return 1;
}
-/* Return 1 if this lwp has an interesting status pending. This
- function may silently resume an inferior lwp. */
+/* Return 1 if this lwp has an interesting status pending. */
static int
-status_pending_p (struct inferior_list_entry *entry, void *arg)
+status_pending_p_callback (struct inferior_list_entry *entry, void *arg)
{
- struct lwp_info *lwp = (struct lwp_info *) entry;
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lp = get_thread_lwp (thread);
ptid_t ptid = * (ptid_t *) arg;
/* Check if we're only interested in events from a specific process
- or its lwps. */
- if (!ptid_equal (minus_one_ptid, ptid)
- && ptid_get_pid (ptid) != ptid_get_pid (lwp->head.id))
+ or a specific LWP. */
+ if (!ptid_match (ptid_of (thread), ptid))
return 0;
- if (lwp->status_pending_p && !lwp->suspended)
- if (check_removed_breakpoint (lwp))
- {
- /* This thread was stopped at a breakpoint, and the breakpoint
- is now gone. We were told to continue (or step...) all threads,
- so GDB isn't trying to single-step past this breakpoint.
- So instead of reporting the old SIGTRAP, pretend we got to
- the breakpoint just after it was removed instead of just
- before; resume the process. */
- linux_resume_one_lwp (lwp, 0, 0, NULL);
- return 0;
- }
+ if (lp->status_pending_p
+ && !thread_still_has_status_pending_p (thread))
+ {
+ linux_resume_one_lwp (lp, lp->stepping, GDB_SIGNAL_0, NULL);
+ return 0;
+ }
- return (lwp->status_pending_p && !lwp->suspended);
+ return lp->status_pending_p;
}
static int
struct lwp_info *
find_lwp_pid (ptid_t ptid)
{
- return (struct lwp_info*) find_inferior (&all_lwps, same_lwp, &ptid);
+ struct inferior_list_entry *thread
+ = find_inferior (&all_threads, same_lwp, &ptid);
+
+ if (thread == NULL)
+ return NULL;
+
+ return get_thread_lwp ((struct thread_info *) thread);
}
-static struct lwp_info *
-linux_wait_for_lwp (ptid_t ptid, int *wstatp, int options)
+/* Return the number of known LWPs in the tgid given by PID. */
+
+static int
+num_lwps (int pid)
{
- int ret;
- int to_wait_for = -1;
- struct lwp_info *child = NULL;
+ struct inferior_list_entry *inf, *tmp;
+ int count = 0;
- if (debug_threads)
- fprintf (stderr, "linux_wait_for_lwp: %s\n", target_pid_to_str (ptid));
+ ALL_INFERIORS (&all_threads, inf, tmp)
+ {
+ if (ptid_get_pid (inf->id) == pid)
+ count++;
+ }
- if (ptid_equal (ptid, minus_one_ptid))
- to_wait_for = -1; /* any child */
- else
- to_wait_for = ptid_get_lwp (ptid); /* this lwp only */
+ return count;
+}
- options |= __WALL;
+/* The arguments passed to iterate_over_lwps. */
-retry:
+struct iterate_over_lwps_args
+{
+ /* The FILTER argument passed to iterate_over_lwps. */
+ ptid_t filter;
- ret = my_waitpid (to_wait_for, wstatp, options);
- if (ret == 0 || (ret == -1 && errno == ECHILD && (options & WNOHANG)))
- return NULL;
- else if (ret == -1)
- perror_with_name ("waitpid");
+ /* The CALLBACK argument passed to iterate_over_lwps. */
+ iterate_over_lwps_ftype *callback;
- if (debug_threads
- && (!WIFSTOPPED (*wstatp)
- || (WSTOPSIG (*wstatp) != 32
- && WSTOPSIG (*wstatp) != 33)))
- fprintf (stderr, "Got an event from %d (%x)\n", ret, *wstatp);
+ /* The DATA argument passed to iterate_over_lwps. */
+ void *data;
+};
- child = find_lwp_pid (pid_to_ptid (ret));
+/* Callback for find_inferior used by iterate_over_lwps to filter
+ calls to the callback supplied to that function. Returning a
+ nonzero value causes find_inferiors to stop iterating and return
+ the current inferior_list_entry. Returning zero indicates that
+ find_inferiors should continue iterating. */
- /* If we didn't find a process, one of two things presumably happened:
- - A process we started and then detached from has exited. Ignore it.
- - A process we are controlling has forked and the new child's stop
- was reported to us by the kernel. Save its PID. */
- if (child == NULL && WIFSTOPPED (*wstatp))
+static int
+iterate_over_lwps_filter (struct inferior_list_entry *entry, void *args_p)
+{
+ struct iterate_over_lwps_args *args
+ = (struct iterate_over_lwps_args *) args_p;
+
+ if (ptid_match (entry->id, args->filter))
{
- add_pid_to_list (&stopped_pids, ret);
- goto retry;
+ struct thread_info *thr = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thr);
+
+ return (*args->callback) (lwp, args->data);
}
- else if (child == NULL)
- goto retry;
- child->stopped = 1;
- child->pending_is_breakpoint = 0;
+ return 0;
+}
- child->last_status = *wstatp;
+/* See nat/linux-nat.h. */
- /* Architecture-specific setup after inferior is running.
- This needs to happen after we have attached to the inferior
- and it is stopped for the first time, but before we access
- any inferior registers. */
- if (new_inferior)
- {
- the_low_target.arch_setup ();
-#ifdef HAVE_LINUX_REGSETS
- memset (disabled_regsets, 0, num_regsets);
-#endif
- new_inferior = 0;
- }
+struct lwp_info *
+iterate_over_lwps (ptid_t filter,
+ iterate_over_lwps_ftype callback,
+ void *data)
+{
+ struct iterate_over_lwps_args args = {filter, callback, data};
+ struct inferior_list_entry *entry;
+
+ entry = find_inferior (&all_threads, iterate_over_lwps_filter, &args);
+ if (entry == NULL)
+ return NULL;
+
+ return get_thread_lwp ((struct thread_info *) entry);
+}
- if (debug_threads
- && WIFSTOPPED (*wstatp)
- && the_low_target.get_pc != NULL)
+/* Detect zombie thread group leaders, and "exit" them. We can't reap
+ their exits until all other threads in the group have exited. */
+
+static void
+check_zombie_leaders (void)
+{
+ struct process_info *proc, *tmp;
+
+ ALL_PROCESSES (proc, tmp)
{
- struct thread_info *saved_inferior = current_inferior;
- struct regcache *regcache = get_thread_regcache (current_inferior, 1);
- CORE_ADDR pc;
+ pid_t leader_pid = pid_of (proc);
+ struct lwp_info *leader_lp;
+
+ leader_lp = find_lwp_pid (pid_to_ptid (leader_pid));
+
+ if (debug_threads)
+ debug_printf ("leader_pid=%d, leader_lp!=NULL=%d, "
+ "num_lwps=%d, zombie=%d\n",
+ leader_pid, leader_lp!= NULL, num_lwps (leader_pid),
+ linux_proc_pid_is_zombie (leader_pid));
+
+ if (leader_lp != NULL
+ /* Check if there are other threads in the group, as we may
+ have raced with the inferior simply exiting. */
+ && !last_thread_of_process_p (leader_pid)
+ && linux_proc_pid_is_zombie (leader_pid))
+ {
+ /* A leader zombie can mean one of two things:
+
+ - It exited, and there's an exit status pending
+ available, or only the leader exited (not the whole
+ program). In the latter case, we can't waitpid the
+ leader's exit status until all other threads are gone.
+
+ - There are 3 or more threads in the group, and a thread
+ other than the leader exec'd. On an exec, the Linux
+ kernel destroys all other threads (except the execing
+ one) in the thread group, and resets the execing thread's
+ tid to the tgid. No exit notification is sent for the
+ execing thread -- from the ptracer's perspective, it
+ appears as though the execing thread just vanishes.
+ Until we reap all other threads except the leader and the
+ execing thread, the leader will be zombie, and the
+ execing thread will be in `D (disc sleep)'. As soon as
+ all other threads are reaped, the execing thread changes
+ it's tid to the tgid, and the previous (zombie) leader
+ vanishes, giving place to the "new" leader. We could try
+ distinguishing the exit and exec cases, by waiting once
+ more, and seeing if something comes out, but it doesn't
+ sound useful. The previous leader _does_ go away, and
+ we'll re-add the new one once we see the exec event
+ (which is just the same as what would happen if the
+ previous leader did exit voluntarily before some other
+ thread execs). */
+
+ if (debug_threads)
+ fprintf (stderr,
+ "CZL: Thread group leader %d zombie "
+ "(it exited, or another thread execd).\n",
+ leader_pid);
- current_inferior = (struct thread_info *)
- find_inferior_id (&all_threads, child->head.id);
- pc = (*the_low_target.get_pc) (regcache);
- fprintf (stderr, "linux_wait_for_lwp: pc is 0x%lx\n", (long) pc);
- current_inferior = saved_inferior;
+ delete_lwp (leader_lp);
+ }
}
+}
- return child;
+/* Callback for `find_inferior'. Returns the first LWP that is not
+ stopped. ARG is a PTID filter. */
+
+static int
+not_stopped_callback (struct inferior_list_entry *entry, void *arg)
+{
+ struct thread_info *thr = (struct thread_info *) entry;
+ struct lwp_info *lwp;
+ ptid_t filter = *(ptid_t *) arg;
+
+ if (!ptid_match (ptid_of (thr), filter))
+ return 0;
+
+ lwp = get_thread_lwp (thr);
+ if (!lwp->stopped)
+ return 1;
+
+ return 0;
}
-/* Wait for an event from child PID. If PID is -1, wait for any
- child. Store the stop status through the status pointer WSTAT.
- OPTIONS is passed to the waitpid call. Return 0 if no child stop
- event was found and OPTIONS contains WNOHANG. Return the PID of
- the stopped child otherwise. */
+/* This function should only be called if the LWP got a SIGTRAP.
+
+ Handle any tracepoint steps or hits. Return true if a tracepoint
+ event was handled, 0 otherwise. */
static int
-linux_wait_for_event_1 (ptid_t ptid, int *wstat, int options)
+handle_tracepoints (struct lwp_info *lwp)
{
- CORE_ADDR stop_pc;
- struct lwp_info *event_child = NULL;
- int bp_status;
- struct lwp_info *requested_child = NULL;
+ struct thread_info *tinfo = get_lwp_thread (lwp);
+ int tpoint_related_event = 0;
- /* Check for a lwp with a pending status. */
- /* It is possible that the user changed the pending task's registers since
- it stopped. We correctly handle the change of PC if we hit a breakpoint
- (in check_removed_breakpoint); signals should be reported anyway. */
+ gdb_assert (lwp->suspended == 0);
- if (ptid_equal (ptid, minus_one_ptid)
- || ptid_equal (pid_to_ptid (ptid_get_pid (ptid)), ptid))
- {
- event_child = (struct lwp_info *)
- find_inferior (&all_lwps, status_pending_p, &ptid);
- if (debug_threads && event_child)
- fprintf (stderr, "Got a pending child %ld\n", lwpid_of (event_child));
- }
- else
- {
- requested_child = find_lwp_pid (ptid);
- if (requested_child->status_pending_p
- && !check_removed_breakpoint (requested_child))
- event_child = requested_child;
- }
+ /* If this tracepoint hit causes a tracing stop, we'll immediately
+ uninsert tracepoints. To do this, we temporarily pause all
+ threads, unpatch away, and then unpause threads. We need to make
+ sure the unpausing doesn't resume LWP too. */
+ lwp->suspended++;
- if (event_child != NULL)
+ /* And we need to be sure that any all-threads-stopping doesn't try
+ to move threads out of the jump pads, as it could deadlock the
+ inferior (LWP could be in the jump pad, maybe even holding the
+ lock.) */
+
+ /* Do any necessary step collect actions. */
+ tpoint_related_event |= tracepoint_finished_step (tinfo, lwp->stop_pc);
+
+ tpoint_related_event |= handle_tracepoint_bkpts (tinfo, lwp->stop_pc);
+
+ /* See if we just hit a tracepoint and do its main collect
+ actions. */
+ tpoint_related_event |= tracepoint_was_hit (tinfo, lwp->stop_pc);
+
+ lwp->suspended--;
+
+ gdb_assert (lwp->suspended == 0);
+ gdb_assert (!stabilizing_threads || lwp->collecting_fast_tracepoint);
+
+ if (tpoint_related_event)
{
if (debug_threads)
- fprintf (stderr, "Got an event from pending child %ld (%04x)\n",
- lwpid_of (event_child), event_child->status_pending);
- *wstat = event_child->status_pending;
- event_child->status_pending_p = 0;
- event_child->status_pending = 0;
- current_inferior = get_lwp_thread (event_child);
- return lwpid_of (event_child);
+ debug_printf ("got a tracepoint event\n");
+ return 1;
}
- /* We only enter this loop if no process has a pending wait status. Thus
- any action taken in response to a wait status inside this loop is
- responding as soon as we detect the status, not after any pending
- events. */
- while (1)
- {
- event_child = linux_wait_for_lwp (ptid, wstat, options);
+ return 0;
+}
- if ((options & WNOHANG) && event_child == NULL)
- return 0;
+/* Convenience wrapper. Returns true if LWP is presently collecting a
+ fast tracepoint. */
+
+static int
+linux_fast_tracepoint_collecting (struct lwp_info *lwp,
+ struct fast_tpoint_collect_status *status)
+{
+ CORE_ADDR thread_area;
+ struct thread_info *thread = get_lwp_thread (lwp);
+
+ if (the_low_target.get_thread_area == NULL)
+ return 0;
+
+ /* Get the thread area address. This is used to recognize which
+ thread is which when tracing with the in-process agent library.
+ We don't read anything from the address, and treat it as opaque;
+ it's the address itself that we assume is unique per-thread. */
+ if ((*the_low_target.get_thread_area) (lwpid_of (thread), &thread_area) == -1)
+ return 0;
+
+ return fast_tracepoint_collecting (thread_area, lwp->stop_pc, status);
+}
+
+/* The reason we resume in the caller, is because we want to be able
+ to pass lwp->status_pending as WSTAT, and we need to clear
+ status_pending_p before resuming, otherwise, linux_resume_one_lwp
+ refuses to resume. */
- if (event_child == NULL)
- error ("event from unknown child");
+static int
+maybe_move_out_of_jump_pad (struct lwp_info *lwp, int *wstat)
+{
+ struct thread_info *saved_thread;
+
+ saved_thread = current_thread;
+ current_thread = get_lwp_thread (lwp);
+
+ if ((wstat == NULL
+ || (WIFSTOPPED (*wstat) && WSTOPSIG (*wstat) != SIGTRAP))
+ && supports_fast_tracepoints ()
+ && agent_loaded_p ())
+ {
+ struct fast_tpoint_collect_status status;
+ int r;
+
+ if (debug_threads)
+ debug_printf ("Checking whether LWP %ld needs to move out of the "
+ "jump pad.\n",
+ lwpid_of (current_thread));
- current_inferior = get_lwp_thread (event_child);
+ r = linux_fast_tracepoint_collecting (lwp, &status);
- /* Check for thread exit. */
- if (! WIFSTOPPED (*wstat))
+ if (wstat == NULL
+ || (WSTOPSIG (*wstat) != SIGILL
+ && WSTOPSIG (*wstat) != SIGFPE
+ && WSTOPSIG (*wstat) != SIGSEGV
+ && WSTOPSIG (*wstat) != SIGBUS))
{
- if (debug_threads)
- fprintf (stderr, "LWP %ld exiting\n", lwpid_of (event_child));
+ lwp->collecting_fast_tracepoint = r;
- /* If the last thread is exiting, just return. */
- if (last_thread_of_process_p (current_inferior))
+ if (r != 0)
{
+ if (r == 1 && lwp->exit_jump_pad_bkpt == NULL)
+ {
+ /* Haven't executed the original instruction yet.
+ Set breakpoint there, and wait till it's hit,
+ then single-step until exiting the jump pad. */
+ lwp->exit_jump_pad_bkpt
+ = set_breakpoint_at (status.adjusted_insn_addr, NULL);
+ }
+
if (debug_threads)
- fprintf (stderr, "LWP %ld is last lwp of process\n",
- lwpid_of (event_child));
- return lwpid_of (event_child);
+ debug_printf ("Checking whether LWP %ld needs to move out of "
+ "the jump pad...it does\n",
+ lwpid_of (current_thread));
+ current_thread = saved_thread;
+
+ return 1;
}
+ }
+ else
+ {
+ /* If we get a synchronous signal while collecting, *and*
+ while executing the (relocated) original instruction,
+ reset the PC to point at the tpoint address, before
+ reporting to GDB. Otherwise, it's an IPA lib bug: just
+ report the signal to GDB, and pray for the best. */
- delete_lwp (event_child);
+ lwp->collecting_fast_tracepoint = 0;
- if (!non_stop)
+ if (r != 0
+ && (status.adjusted_insn_addr <= lwp->stop_pc
+ && lwp->stop_pc < status.adjusted_insn_addr_end))
{
- current_inferior = (struct thread_info *) all_threads.head;
- if (debug_threads)
- fprintf (stderr, "Current inferior is now %ld\n",
- lwpid_of (get_thread_lwp (current_inferior)));
+ siginfo_t info;
+ struct regcache *regcache;
+
+ /* The si_addr on a few signals references the address
+ of the faulting instruction. Adjust that as
+ well. */
+ if ((WSTOPSIG (*wstat) == SIGILL
+ || WSTOPSIG (*wstat) == SIGFPE
+ || WSTOPSIG (*wstat) == SIGBUS
+ || WSTOPSIG (*wstat) == SIGSEGV)
+ && ptrace (PTRACE_GETSIGINFO, lwpid_of (current_thread),
+ (PTRACE_TYPE_ARG3) 0, &info) == 0
+ /* Final check just to make sure we don't clobber
+ the siginfo of non-kernel-sent signals. */
+ && (uintptr_t) info.si_addr == lwp->stop_pc)
+ {
+ info.si_addr = (void *) (uintptr_t) status.tpoint_addr;
+ ptrace (PTRACE_SETSIGINFO, lwpid_of (current_thread),
+ (PTRACE_TYPE_ARG3) 0, &info);
+ }
+
+ regcache = get_thread_regcache (current_thread, 1);
+ (*the_low_target.set_pc) (regcache, status.tpoint_addr);
+ lwp->stop_pc = status.tpoint_addr;
+
+ /* Cancel any fast tracepoint lock this thread was
+ holding. */
+ force_unlock_trace_buffer ();
}
- else
+
+ if (lwp->exit_jump_pad_bkpt != NULL)
{
- current_inferior = NULL;
if (debug_threads)
- fprintf (stderr, "Current inferior is now <NULL>\n");
- }
+ debug_printf ("Cancelling fast exit-jump-pad: removing bkpt. "
+ "stopping all threads momentarily.\n");
- /* If we were waiting for this particular child to do something...
- well, it did something. */
- if (requested_child != NULL)
- return lwpid_of (event_child);
+ stop_all_lwps (1, lwp);
- /* Wait for a more interesting event. */
- continue;
- }
-
- if (event_child->must_set_ptrace_flags)
- {
- ptrace (PTRACE_SETOPTIONS, lwpid_of (event_child),
- 0, (PTRACE_ARG4_TYPE) PTRACE_O_TRACECLONE);
- event_child->must_set_ptrace_flags = 0;
- }
+ delete_breakpoint (lwp->exit_jump_pad_bkpt);
+ lwp->exit_jump_pad_bkpt = NULL;
- if (WIFSTOPPED (*wstat)
- && WSTOPSIG (*wstat) == SIGSTOP
- && event_child->stop_expected)
- {
- if (debug_threads)
- fprintf (stderr, "Expected stop.\n");
- event_child->stop_expected = 0;
- linux_resume_one_lwp (event_child, event_child->stepping, 0, NULL);
- continue;
- }
+ unstop_all_lwps (1, lwp);
- if (WIFSTOPPED (*wstat) && WSTOPSIG (*wstat) == SIGTRAP
- && *wstat >> 16 != 0)
- {
- handle_extended_wait (event_child, *wstat);
- continue;
+ gdb_assert (lwp->suspended >= 0);
+ }
}
+ }
- /* If GDB is not interested in this signal, don't stop other
- threads, and don't report it to GDB. Just resume the
- inferior right away. We do this for threading-related
- signals as well as any that GDB specifically requested we
- ignore. But never ignore SIGSTOP if we sent it ourselves,
- and do not ignore signals when stepping - they may require
- special handling to skip the signal handler. */
- /* FIXME drow/2002-06-09: Get signal numbers from the inferior's
- thread library? */
- if (WIFSTOPPED (*wstat)
- && !event_child->stepping
- && (
-#if defined (USE_THREAD_DB) && defined (__SIGRTMIN)
- (current_process ()->private->thread_db != NULL
- && (WSTOPSIG (*wstat) == __SIGRTMIN
- || WSTOPSIG (*wstat) == __SIGRTMIN + 1))
- ||
-#endif
- (pass_signals[target_signal_from_host (WSTOPSIG (*wstat))]
- && (WSTOPSIG (*wstat) != SIGSTOP || !stopping_threads))))
- {
- siginfo_t info, *info_p;
+ if (debug_threads)
+ debug_printf ("Checking whether LWP %ld needs to move out of the "
+ "jump pad...no\n",
+ lwpid_of (current_thread));
- if (debug_threads)
- fprintf (stderr, "Ignored signal %d for LWP %ld.\n",
- WSTOPSIG (*wstat), lwpid_of (event_child));
+ current_thread = saved_thread;
+ return 0;
+}
- if (ptrace (PTRACE_GETSIGINFO, lwpid_of (event_child), 0, &info) == 0)
- info_p = &info;
- else
- info_p = NULL;
- linux_resume_one_lwp (event_child,
- event_child->stepping,
- WSTOPSIG (*wstat), info_p);
- continue;
- }
+/* Enqueue one signal in the "signals to report later when out of the
+ jump pad" list. */
- /* If this event was not handled above, and is not a SIGTRAP, report
- it. */
- if (!WIFSTOPPED (*wstat) || WSTOPSIG (*wstat) != SIGTRAP)
- return lwpid_of (event_child);
+static void
+enqueue_one_deferred_signal (struct lwp_info *lwp, int *wstat)
+{
+ struct pending_signals *p_sig;
+ struct thread_info *thread = get_lwp_thread (lwp);
- /* If this target does not support breakpoints, we simply report the
- SIGTRAP; it's of no concern to us. */
- if (the_low_target.get_pc == NULL)
- return lwpid_of (event_child);
+ if (debug_threads)
+ debug_printf ("Deferring signal %d for LWP %ld.\n",
+ WSTOPSIG (*wstat), lwpid_of (thread));
- stop_pc = get_stop_pc ();
+ if (debug_threads)
+ {
+ struct pending_signals *sig;
- /* bp_reinsert will only be set if we were single-stepping.
- Notice that we will resume the process after hitting
- a gdbserver breakpoint; single-stepping to/over one
- is not supported (yet). */
- if (event_child->bp_reinsert != 0)
- {
- if (debug_threads)
- fprintf (stderr, "Reinserted breakpoint.\n");
- reinsert_breakpoint (event_child->bp_reinsert);
- event_child->bp_reinsert = 0;
+ for (sig = lwp->pending_signals_to_report;
+ sig != NULL;
+ sig = sig->prev)
+ debug_printf (" Already queued %d\n",
+ sig->signal);
- /* Clear the single-stepping flag and SIGTRAP as we resume. */
- linux_resume_one_lwp (event_child, 0, 0, NULL);
- continue;
- }
+ debug_printf (" (no more currently queued signals)\n");
+ }
- bp_status = check_breakpoints (stop_pc);
+ /* Don't enqueue non-RT signals if they are already in the deferred
+ queue. (SIGSTOP being the easiest signal to see ending up here
+ twice) */
+ if (WSTOPSIG (*wstat) < __SIGRTMIN)
+ {
+ struct pending_signals *sig;
- if (bp_status != 0)
+ for (sig = lwp->pending_signals_to_report;
+ sig != NULL;
+ sig = sig->prev)
{
- if (debug_threads)
- fprintf (stderr, "Hit a gdbserver breakpoint.\n");
-
- /* We hit one of our own breakpoints. We mark it as a pending
- breakpoint, so that check_removed_breakpoint () will do the PC
- adjustment for us at the appropriate time. */
- event_child->pending_is_breakpoint = 1;
- event_child->pending_stop_pc = stop_pc;
-
- /* We may need to put the breakpoint back. We continue in the event
- loop instead of simply replacing the breakpoint right away,
- in order to not lose signals sent to the thread that hit the
- breakpoint. Unfortunately this increases the window where another
- thread could sneak past the removed breakpoint. For the current
- use of server-side breakpoints (thread creation) this is
- acceptable; but it needs to be considered before this breakpoint
- mechanism can be used in more general ways. For some breakpoints
- it may be necessary to stop all other threads, but that should
- be avoided where possible.
-
- If breakpoint_reinsert_addr is NULL, that means that we can
- use PTRACE_SINGLESTEP on this platform. Uninsert the breakpoint,
- mark it for reinsertion, and single-step.
-
- Otherwise, call the target function to figure out where we need
- our temporary breakpoint, create it, and continue executing this
- process. */
-
- /* NOTE: we're lifting breakpoints in non-stop mode. This
- is currently only used for thread event breakpoints, so
- it isn't that bad as long as we have PTRACE_EVENT_CLONE
- events. */
- if (bp_status == 2)
- /* No need to reinsert. */
- linux_resume_one_lwp (event_child, 0, 0, NULL);
- else if (the_low_target.breakpoint_reinsert_addr == NULL)
- {
- event_child->bp_reinsert = stop_pc;
- uninsert_breakpoint (stop_pc);
- linux_resume_one_lwp (event_child, 1, 0, NULL);
- }
- else
+ if (sig->signal == WSTOPSIG (*wstat))
{
- reinsert_breakpoint_by_bp
- (stop_pc, (*the_low_target.breakpoint_reinsert_addr) ());
- linux_resume_one_lwp (event_child, 0, 0, NULL);
+ if (debug_threads)
+ debug_printf ("Not requeuing already queued non-RT signal %d"
+ " for LWP %ld\n",
+ sig->signal,
+ lwpid_of (thread));
+ return;
}
-
- continue;
}
+ }
- if (debug_threads)
- fprintf (stderr, "Hit a non-gdbserver breakpoint.\n");
+ p_sig = xmalloc (sizeof (*p_sig));
+ p_sig->prev = lwp->pending_signals_to_report;
+ p_sig->signal = WSTOPSIG (*wstat);
+ memset (&p_sig->info, 0, sizeof (siginfo_t));
+ ptrace (PTRACE_GETSIGINFO, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
+ &p_sig->info);
+
+ lwp->pending_signals_to_report = p_sig;
+}
+
+/* Dequeue one signal from the "signals to report later when out of
+ the jump pad" list. */
+
+static int
+dequeue_one_deferred_signal (struct lwp_info *lwp, int *wstat)
+{
+ struct thread_info *thread = get_lwp_thread (lwp);
+
+ if (lwp->pending_signals_to_report != NULL)
+ {
+ struct pending_signals **p_sig;
+
+ p_sig = &lwp->pending_signals_to_report;
+ while ((*p_sig)->prev != NULL)
+ p_sig = &(*p_sig)->prev;
+
+ *wstat = W_STOPCODE ((*p_sig)->signal);
+ if ((*p_sig)->info.si_signo != 0)
+ ptrace (PTRACE_SETSIGINFO, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
+ &(*p_sig)->info);
+ free (*p_sig);
+ *p_sig = NULL;
- /* If we were single-stepping, we definitely want to report the
- SIGTRAP. Although the single-step operation has completed,
- do not clear clear the stepping flag yet; we need to check it
- in wait_for_sigstop. */
- if (event_child->stepping)
- return lwpid_of (event_child);
+ if (debug_threads)
+ debug_printf ("Reporting deferred signal %d for LWP %ld.\n",
+ WSTOPSIG (*wstat), lwpid_of (thread));
- /* A SIGTRAP that we can't explain. It may have been a breakpoint.
- Check if it is a breakpoint, and if so mark the process information
- accordingly. This will handle both the necessary fiddling with the
- PC on decr_pc_after_break targets and suppressing extra threads
- hitting a breakpoint if two hit it at once and then GDB removes it
- after the first is reported. Arguably it would be better to report
- multiple threads hitting breakpoints simultaneously, but the current
- remote protocol does not allow this. */
- if ((*the_low_target.breakpoint_at) (stop_pc))
+ if (debug_threads)
{
- event_child->pending_is_breakpoint = 1;
- event_child->pending_stop_pc = stop_pc;
+ struct pending_signals *sig;
+
+ for (sig = lwp->pending_signals_to_report;
+ sig != NULL;
+ sig = sig->prev)
+ debug_printf (" Still queued %d\n",
+ sig->signal);
+
+ debug_printf (" (no more queued signals)\n");
}
- return lwpid_of (event_child);
+ return 1;
}
- /* NOTREACHED */
return 0;
}
+/* Fetch the possibly triggered data watchpoint info and store it in
+ CHILD.
+
+ On some archs, like x86, that use debug registers to set
+ watchpoints, it's possible that the way to know which watched
+ address trapped, is to check the register that is used to select
+ which address to watch. Problem is, between setting the watchpoint
+ and reading back which data address trapped, the user may change
+ the set of watchpoints, and, as a consequence, GDB changes the
+ debug registers in the inferior. To avoid reading back a stale
+ stopped-data-address when that happens, we cache in LP the fact
+ that a watchpoint trapped, and the corresponding data address, as
+ soon as we see CHILD stop with a SIGTRAP. If GDB changes the debug
+ registers meanwhile, we have the cached data we can rely on. */
+
static int
-linux_wait_for_event (ptid_t ptid, int *wstat, int options)
+check_stopped_by_watchpoint (struct lwp_info *child)
{
- ptid_t wait_ptid;
-
- if (ptid_is_pid (ptid))
- {
- /* A request to wait for a specific tgid. This is not possible
- with waitpid, so instead, we wait for any child, and leave
- children we're not interested in right now with a pending
- status to report later. */
- wait_ptid = minus_one_ptid;
- }
- else
- wait_ptid = ptid;
-
- while (1)
+ if (the_low_target.stopped_by_watchpoint != NULL)
{
- int event_pid;
+ struct thread_info *saved_thread;
- event_pid = linux_wait_for_event_1 (wait_ptid, wstat, options);
+ saved_thread = current_thread;
+ current_thread = get_lwp_thread (child);
- if (event_pid > 0
- && ptid_is_pid (ptid) && ptid_get_pid (ptid) != event_pid)
+ if (the_low_target.stopped_by_watchpoint ())
{
- struct lwp_info *event_child = find_lwp_pid (pid_to_ptid (event_pid));
+ child->stop_reason = TARGET_STOPPED_BY_WATCHPOINT;
- if (! WIFSTOPPED (*wstat))
- mark_lwp_dead (event_child, *wstat);
+ if (the_low_target.stopped_data_address != NULL)
+ child->stopped_data_address
+ = the_low_target.stopped_data_address ();
else
- {
- event_child->status_pending_p = 1;
- event_child->status_pending = *wstat;
- }
+ child->stopped_data_address = 0;
}
- else
- return event_pid;
+
+ current_thread = saved_thread;
}
+
+ return child->stop_reason == TARGET_STOPPED_BY_WATCHPOINT;
}
-/* Wait for process, returns status. */
+/* Return the ptrace options that we want to try to enable. */
-static ptid_t
-linux_wait_1 (ptid_t ptid,
- struct target_waitstatus *ourstatus, int target_options)
+static int
+linux_low_ptrace_options (int attached)
{
- int w;
- struct thread_info *thread = NULL;
- struct lwp_info *lwp = NULL;
- int options;
- int pid;
+ int options = 0;
- /* Translate generic target options into linux options. */
- options = __WALL;
- if (target_options & TARGET_WNOHANG)
- options |= WNOHANG;
+ if (!attached)
+ options |= PTRACE_O_EXITKILL;
-retry:
- ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ if (report_fork_events)
+ options |= PTRACE_O_TRACEFORK;
- /* If we were only supposed to resume one thread, only wait for
- that thread - if it's still alive. If it died, however - which
- can happen if we're coming from the thread death case below -
- then we need to make sure we restart the other threads. We could
- pick a thread at random or restart all; restarting all is less
- arbitrary. */
- if (!non_stop
- && !ptid_equal (cont_thread, null_ptid)
- && !ptid_equal (cont_thread, minus_one_ptid))
- {
- thread = (struct thread_info *) find_inferior_id (&all_threads,
- cont_thread);
+ return options;
+}
- /* No stepping, no signal - unless one is pending already, of course. */
- if (thread == NULL)
- {
- struct thread_resume resume_info;
- resume_info.thread = minus_one_ptid;
- resume_info.kind = resume_continue;
- resume_info.sig = 0;
- linux_resume (&resume_info, 1);
- }
- else
- ptid = cont_thread;
- }
+/* Do low-level handling of the event, and check if we should go on
+ and pass it to caller code. Return the affected lwp if we are, or
+ NULL otherwise. */
+
+static struct lwp_info *
+linux_low_filter_event (int lwpid, int wstat)
+{
+ struct lwp_info *child;
+ struct thread_info *thread;
+ int have_stop_pc = 0;
+
+ child = find_lwp_pid (pid_to_ptid (lwpid));
- pid = linux_wait_for_event (ptid, &w, options);
- if (pid == 0) /* only if TARGET_WNOHANG */
- return null_ptid;
+ /* If we didn't find a process, one of two things presumably happened:
+ - A process we started and then detached from has exited. Ignore it.
+ - A process we are controlling has forked and the new child's stop
+ was reported to us by the kernel. Save its PID. */
+ if (child == NULL && WIFSTOPPED (wstat))
+ {
+ add_to_pid_list (&stopped_pids, lwpid, wstat);
+ return NULL;
+ }
+ else if (child == NULL)
+ return NULL;
- lwp = get_thread_lwp (current_inferior);
+ thread = get_lwp_thread (child);
- /* If we are waiting for a particular child, and it exited,
- linux_wait_for_event will return its exit status. Similarly if
- the last child exited. If this is not the last child, however,
- do not report it as exited until there is a 'thread exited' response
- available in the remote protocol. Instead, just wait for another event.
- This should be safe, because if the thread crashed we will already
- have reported the termination signal to GDB; that should stop any
- in-progress stepping operations, etc.
+ child->stopped = 1;
- Report the exit status of the last thread to exit. This matches
- LinuxThreads' behavior. */
+ child->last_status = wstat;
- if (last_thread_of_process_p (current_inferior))
+ /* Check if the thread has exited. */
+ if ((WIFEXITED (wstat) || WIFSIGNALED (wstat)))
{
- if (WIFEXITED (w) || WIFSIGNALED (w))
+ if (debug_threads)
+ debug_printf ("LLFE: %d exited.\n", lwpid);
+ if (num_lwps (pid_of (thread)) > 1)
{
- int pid = pid_of (lwp);
- struct process_info *process = find_process_pid (pid);
-#ifdef USE_THREAD_DB
- thread_db_free (process, 0);
-#endif
- delete_lwp (lwp);
- linux_remove_process (process);
+ /* If there is at least one more LWP, then the exit signal was
+ not the end of the debugged application and should be
+ ignored. */
+ delete_lwp (child);
+ return NULL;
+ }
+ else
+ {
+ /* This was the last lwp in the process. Since events are
+ serialized to GDB core, and we can't report this one
+ right now, but GDB core and the other target layers will
+ want to be notified about the exit code/signal, leave the
+ status pending for the next time we're able to report
+ it. */
+ mark_lwp_dead (child, wstat);
+ return child;
+ }
+ }
- current_inferior = NULL;
+ gdb_assert (WIFSTOPPED (wstat));
- if (WIFEXITED (w))
- {
- ourstatus->kind = TARGET_WAITKIND_EXITED;
- ourstatus->value.integer = WEXITSTATUS (w);
+ if (WIFSTOPPED (wstat))
+ {
+ struct process_info *proc;
+
+ /* Architecture-specific setup after inferior is running. This
+ needs to happen after we have attached to the inferior and it
+ is stopped for the first time, but before we access any
+ inferior registers. */
+ proc = find_process_pid (pid_of (thread));
+ if (proc->priv->new_inferior)
+ {
+ struct thread_info *saved_thread;
- if (debug_threads)
- fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
- }
- else
- {
- ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
- ourstatus->value.sig = target_signal_from_host (WTERMSIG (w));
+ saved_thread = current_thread;
+ current_thread = thread;
- if (debug_threads)
- fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
+ the_low_target.arch_setup ();
- }
+ current_thread = saved_thread;
- return pid_to_ptid (pid);
+ proc->priv->new_inferior = 0;
}
}
- else
- {
- if (!WIFSTOPPED (w))
- goto retry;
- }
-
- /* In all-stop, stop all threads. Be careful to only do this if
- we're about to report an event to GDB. */
- if (!non_stop)
- stop_all_lwps ();
-
- ourstatus->kind = TARGET_WAITKIND_STOPPED;
- if (lwp->suspended && WSTOPSIG (w) == SIGSTOP)
+ if (WIFSTOPPED (wstat) && child->must_set_ptrace_flags)
{
- /* A thread that has been requested to stop by GDB with vCont;t,
- and it stopped cleanly, so report as SIG0. The use of
- SIGSTOP is an implementation detail. */
- ourstatus->value.sig = TARGET_SIGNAL_0;
+ struct process_info *proc = find_process_pid (pid_of (thread));
+ int options = linux_low_ptrace_options (proc->attached);
+
+ linux_enable_event_reporting (lwpid, options);
+ child->must_set_ptrace_flags = 0;
}
- else if (lwp->suspended && WSTOPSIG (w) != SIGSTOP)
+
+ /* Be careful to not overwrite stop_pc until
+ check_stopped_by_breakpoint is called. */
+ if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGTRAP
+ && linux_is_extended_waitstatus (wstat))
{
- /* A thread that has been requested to stop by GDB with vCont;t,
- but, it stopped for other reasons. Set stop_expected so the
- pending SIGSTOP is ignored and the LWP is resumed. */
- lwp->stop_expected = 1;
- ourstatus->value.sig = target_signal_from_host (WSTOPSIG (w));
+ child->stop_pc = get_pc (child);
+ if (handle_extended_wait (child, wstat))
+ {
+ /* The event has been handled, so just return without
+ reporting it. */
+ return NULL;
+ }
}
- else
+
+ /* Check first whether this was a SW/HW breakpoint before checking
+ watchpoints, because at least s390 can't tell the data address of
+ hardware watchpoint hits, and returns stopped-by-watchpoint as
+ long as there's a watchpoint set. */
+ if (WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat))
{
- ourstatus->value.sig = target_signal_from_host (WSTOPSIG (w));
+ if (check_stopped_by_breakpoint (child))
+ have_stop_pc = 1;
}
- if (debug_threads)
- fprintf (stderr, "linux_wait ret = %s, %d, %d\n",
- target_pid_to_str (lwp->head.id),
- ourstatus->kind,
- ourstatus->value.sig);
+ /* Note that TRAP_HWBKPT can indicate either a hardware breakpoint
+ or hardware watchpoint. Check which is which if we got
+ TARGET_STOPPED_BY_HW_BREAKPOINT. */
+ if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGTRAP
+ && (child->stop_reason == TARGET_STOPPED_BY_NO_REASON
+ || child->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT))
+ check_stopped_by_watchpoint (child);
- return lwp->head.id;
-}
+ if (!have_stop_pc)
+ child->stop_pc = get_pc (child);
-/* Get rid of any pending event in the pipe. */
-static void
-async_file_flush (void)
-{
- int ret;
- char buf;
+ if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGSTOP
+ && child->stop_expected)
+ {
+ if (debug_threads)
+ debug_printf ("Expected stop.\n");
+ child->stop_expected = 0;
- do
- ret = read (linux_event_pipe[0], &buf, 1);
- while (ret >= 0 || (ret == -1 && errno == EINTR));
+ if (thread->last_resume_kind == resume_stop)
+ {
+ /* We want to report the stop to the core. Treat the
+ SIGSTOP as a normal event. */
+ if (debug_threads)
+ debug_printf ("LLW: resume_stop SIGSTOP caught for %s.\n",
+ target_pid_to_str (ptid_of (thread)));
+ }
+ else if (stopping_threads != NOT_STOPPING_THREADS)
+ {
+ /* Stopping threads. We don't want this SIGSTOP to end up
+ pending. */
+ if (debug_threads)
+ debug_printf ("LLW: SIGSTOP caught for %s "
+ "while stopping threads.\n",
+ target_pid_to_str (ptid_of (thread)));
+ return NULL;
+ }
+ else
+ {
+ /* This is a delayed SIGSTOP. Filter out the event. */
+ if (debug_threads)
+ debug_printf ("LLW: %s %s, 0, 0 (discard delayed SIGSTOP)\n",
+ child->stepping ? "step" : "continue",
+ target_pid_to_str (ptid_of (thread)));
+
+ linux_resume_one_lwp (child, child->stepping, 0, NULL);
+ return NULL;
+ }
+ }
+
+ child->status_pending_p = 1;
+ child->status_pending = wstat;
+ return child;
}
-/* Put something in the pipe, so the event loop wakes up. */
+/* Resume LWPs that are currently stopped without any pending status
+ to report, but are resumed from the core's perspective. */
+
static void
-async_file_mark (void)
+resume_stopped_resumed_lwps (struct inferior_list_entry *entry)
{
- int ret;
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lp = get_thread_lwp (thread);
- async_file_flush ();
+ if (lp->stopped
+ && !lp->status_pending_p
+ && thread->last_resume_kind != resume_stop
+ && thread->last_status.kind == TARGET_WAITKIND_IGNORE)
+ {
+ int step = thread->last_resume_kind == resume_step;
- do
- ret = write (linux_event_pipe[1], "+", 1);
- while (ret == 0 || (ret == -1 && errno == EINTR));
+ if (debug_threads)
+ debug_printf ("RSRL: resuming stopped-resumed LWP %s at %s: step=%d\n",
+ target_pid_to_str (ptid_of (thread)),
+ paddress (lp->stop_pc),
+ step);
- /* Ignore EAGAIN. If the pipe is full, the event loop will already
- be awakened anyway. */
+ linux_resume_one_lwp (lp, step, GDB_SIGNAL_0, NULL);
+ }
}
-static ptid_t
-linux_wait (ptid_t ptid,
- struct target_waitstatus *ourstatus, int target_options)
+/* Wait for an event from child(ren) WAIT_PTID, and return any that
+ match FILTER_PTID (leaving others pending). The PTIDs can be:
+ minus_one_ptid, to specify any child; a pid PTID, specifying all
+ lwps of a thread group; or a PTID representing a single lwp. Store
+ the stop status through the status pointer WSTAT. OPTIONS is
+ passed to the waitpid call. Return 0 if no event was found and
+ OPTIONS contains WNOHANG. Return -1 if no unwaited-for children
+ was found. Return the PID of the stopped child otherwise. */
+
+static int
+linux_wait_for_event_filtered (ptid_t wait_ptid, ptid_t filter_ptid,
+ int *wstatp, int options)
{
- ptid_t event_ptid;
+ struct thread_info *event_thread;
+ struct lwp_info *event_child, *requested_child;
+ sigset_t block_mask, prev_mask;
- if (debug_threads)
- fprintf (stderr, "linux_wait: [%s]\n", target_pid_to_str (ptid));
+ retry:
+ /* N.B. event_thread points to the thread_info struct that contains
+ event_child. Keep them in sync. */
+ event_thread = NULL;
+ event_child = NULL;
+ requested_child = NULL;
- /* Flush the async file first. */
- if (target_is_async_p ())
- async_file_flush ();
+ /* Check for a lwp with a pending status. */
- event_ptid = linux_wait_1 (ptid, ourstatus, target_options);
+ if (ptid_equal (filter_ptid, minus_one_ptid) || ptid_is_pid (filter_ptid))
+ {
+ event_thread = (struct thread_info *)
+ find_inferior (&all_threads, status_pending_p_callback, &filter_ptid);
+ if (event_thread != NULL)
+ event_child = get_thread_lwp (event_thread);
+ if (debug_threads && event_thread)
+ debug_printf ("Got a pending child %ld\n", lwpid_of (event_thread));
+ }
+ else if (!ptid_equal (filter_ptid, null_ptid))
+ {
+ requested_child = find_lwp_pid (filter_ptid);
- /* If at least one stop was reported, there may be more. A single
- SIGCHLD can signal more than one child stop. */
- if (target_is_async_p ()
- && (target_options & TARGET_WNOHANG) != 0
- && !ptid_equal (event_ptid, null_ptid))
- async_file_mark ();
+ if (stopping_threads == NOT_STOPPING_THREADS
+ && requested_child->status_pending_p
+ && requested_child->collecting_fast_tracepoint)
+ {
+ enqueue_one_deferred_signal (requested_child,
+ &requested_child->status_pending);
+ requested_child->status_pending_p = 0;
+ requested_child->status_pending = 0;
+ linux_resume_one_lwp (requested_child, 0, 0, NULL);
+ }
- return event_ptid;
-}
+ if (requested_child->suspended
+ && requested_child->status_pending_p)
+ {
+ internal_error (__FILE__, __LINE__,
+ "requesting an event out of a"
+ " suspended child?");
+ }
-/* Send a signal to an LWP. */
+ if (requested_child->status_pending_p)
+ {
+ event_child = requested_child;
+ event_thread = get_lwp_thread (event_child);
+ }
+ }
-static int
-kill_lwp (unsigned long lwpid, int signo)
-{
- /* Use tkill, if possible, in case we are using nptl threads. If tkill
- fails, then we are not using nptl threads and we should be using kill. */
+ if (event_child != NULL)
+ {
+ if (debug_threads)
+ debug_printf ("Got an event from pending child %ld (%04x)\n",
+ lwpid_of (event_thread), event_child->status_pending);
+ *wstatp = event_child->status_pending;
+ event_child->status_pending_p = 0;
+ event_child->status_pending = 0;
+ current_thread = event_thread;
+ return lwpid_of (event_thread);
+ }
-#ifdef __NR_tkill
- {
- static int tkill_failed;
+ /* But if we don't find a pending event, we'll have to wait.
- if (!tkill_failed)
- {
- int ret;
+ We only enter this loop if no process has a pending wait status.
+ Thus any action taken in response to a wait status inside this
+ loop is responding as soon as we detect the status, not after any
+ pending events. */
- errno = 0;
- ret = syscall (__NR_tkill, lwpid, signo);
- if (errno != ENOSYS)
- return ret;
- tkill_failed = 1;
- }
- }
-#endif
+ /* Make sure SIGCHLD is blocked until the sigsuspend below. Block
+ all signals while here. */
+ sigfillset (&block_mask);
+ sigprocmask (SIG_BLOCK, &block_mask, &prev_mask);
- return kill (lwpid, signo);
-}
+ /* Always pull all events out of the kernel. We'll randomly select
+ an event LWP out of all that have events, to prevent
+ starvation. */
+ while (event_child == NULL)
+ {
+ pid_t ret = 0;
-static void
-send_sigstop (struct inferior_list_entry *entry)
-{
- struct lwp_info *lwp = (struct lwp_info *) entry;
- int pid;
+ /* Always use -1 and WNOHANG, due to couple of a kernel/ptrace
+ quirks:
- if (lwp->stopped)
- return;
+ - If the thread group leader exits while other threads in the
+ thread group still exist, waitpid(TGID, ...) hangs. That
+ waitpid won't return an exit status until the other threads
+ in the group are reaped.
- pid = lwpid_of (lwp);
+ - When a non-leader thread execs, that thread just vanishes
+ without reporting an exit (so we'd hang if we waited for it
+ explicitly in that case). The exec event is reported to
+ the TGID pid (although we don't currently enable exec
+ events). */
+ errno = 0;
+ ret = my_waitpid (-1, wstatp, options | WNOHANG);
- /* If we already have a pending stop signal for this process, don't
- send another. */
- if (lwp->stop_expected)
- {
if (debug_threads)
- fprintf (stderr, "Have pending sigstop for lwp %d\n", pid);
+ debug_printf ("LWFE: waitpid(-1, ...) returned %d, %s\n",
+ ret, errno ? strerror (errno) : "ERRNO-OK");
- /* We clear the stop_expected flag so that wait_for_sigstop
- will receive the SIGSTOP event (instead of silently resuming and
- waiting again). It'll be reset below. */
- lwp->stop_expected = 0;
- return;
+ if (ret > 0)
+ {
+ if (debug_threads)
+ {
+ debug_printf ("LLW: waitpid %ld received %s\n",
+ (long) ret, status_to_str (*wstatp));
+ }
+
+ /* Filter all events. IOW, leave all events pending. We'll
+ randomly select an event LWP out of all that have events
+ below. */
+ linux_low_filter_event (ret, *wstatp);
+ /* Retry until nothing comes out of waitpid. A single
+ SIGCHLD can indicate more than one child stopped. */
+ continue;
+ }
+
+ /* Now that we've pulled all events out of the kernel, resume
+ LWPs that don't have an interesting event to report. */
+ if (stopping_threads == NOT_STOPPING_THREADS)
+ for_each_inferior (&all_threads, resume_stopped_resumed_lwps);
+
+ /* ... and find an LWP with a status to report to the core, if
+ any. */
+ event_thread = (struct thread_info *)
+ find_inferior (&all_threads, status_pending_p_callback, &filter_ptid);
+ if (event_thread != NULL)
+ {
+ event_child = get_thread_lwp (event_thread);
+ *wstatp = event_child->status_pending;
+ event_child->status_pending_p = 0;
+ event_child->status_pending = 0;
+ break;
+ }
+
+ /* Check for zombie thread group leaders. Those can't be reaped
+ until all other threads in the thread group are. */
+ check_zombie_leaders ();
+
+ /* If there are no resumed children left in the set of LWPs we
+ want to wait for, bail. We can't just block in
+ waitpid/sigsuspend, because lwps might have been left stopped
+ in trace-stop state, and we'd be stuck forever waiting for
+ their status to change (which would only happen if we resumed
+ them). Even if WNOHANG is set, this return code is preferred
+ over 0 (below), as it is more detailed. */
+ if ((find_inferior (&all_threads,
+ not_stopped_callback,
+ &wait_ptid) == NULL))
+ {
+ if (debug_threads)
+ debug_printf ("LLW: exit (no unwaited-for LWP)\n");
+ sigprocmask (SIG_SETMASK, &prev_mask, NULL);
+ return -1;
+ }
+
+ /* No interesting event to report to the caller. */
+ if ((options & WNOHANG))
+ {
+ if (debug_threads)
+ debug_printf ("WNOHANG set, no event found\n");
+
+ sigprocmask (SIG_SETMASK, &prev_mask, NULL);
+ return 0;
+ }
+
+ /* Block until we get an event reported with SIGCHLD. */
+ if (debug_threads)
+ debug_printf ("sigsuspend'ing\n");
+
+ sigsuspend (&prev_mask);
+ sigprocmask (SIG_SETMASK, &prev_mask, NULL);
+ goto retry;
}
- if (debug_threads)
- fprintf (stderr, "Sending sigstop to lwp %d\n", pid);
+ sigprocmask (SIG_SETMASK, &prev_mask, NULL);
- kill_lwp (pid, SIGSTOP);
+ current_thread = event_thread;
+
+ /* Check for thread exit. */
+ if (! WIFSTOPPED (*wstatp))
+ {
+ gdb_assert (last_thread_of_process_p (pid_of (event_thread)));
+
+ if (debug_threads)
+ debug_printf ("LWP %d is the last lwp of process. "
+ "Process %ld exiting.\n",
+ pid_of (event_thread), lwpid_of (event_thread));
+ return lwpid_of (event_thread);
+ }
+
+ return lwpid_of (event_thread);
}
-static void
-mark_lwp_dead (struct lwp_info *lwp, int wstat)
+/* Wait for an event from child(ren) PTID. PTIDs can be:
+ minus_one_ptid, to specify any child; a pid PTID, specifying all
+ lwps of a thread group; or a PTID representing a single lwp. Store
+ the stop status through the status pointer WSTAT. OPTIONS is
+ passed to the waitpid call. Return 0 if no event was found and
+ OPTIONS contains WNOHANG. Return -1 if no unwaited-for children
+ was found. Return the PID of the stopped child otherwise. */
+
+static int
+linux_wait_for_event (ptid_t ptid, int *wstatp, int options)
{
- /* It's dead, really. */
- lwp->dead = 1;
+ return linux_wait_for_event_filtered (ptid, ptid, wstatp, options);
+}
- /* Store the exit status for later. */
- lwp->status_pending_p = 1;
- lwp->status_pending = wstat;
+/* Count the LWP's that have had events. */
- /* So that check_removed_breakpoint doesn't try to figure out if
- this is stopped at a breakpoint. */
- lwp->pending_is_breakpoint = 0;
+static int
+count_events_callback (struct inferior_list_entry *entry, void *data)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lp = get_thread_lwp (thread);
+ int *count = data;
- /* Prevent trying to stop it. */
- lwp->stopped = 1;
+ gdb_assert (count != NULL);
- /* No further stops are expected from a dead lwp. */
- lwp->stop_expected = 0;
+ /* Count only resumed LWPs that have an event pending. */
+ if (thread->last_status.kind == TARGET_WAITKIND_IGNORE
+ && lp->status_pending_p)
+ (*count)++;
+
+ return 0;
}
-static void
-wait_for_sigstop (struct inferior_list_entry *entry)
-{
- struct lwp_info *lwp = (struct lwp_info *) entry;
- struct thread_info *saved_inferior;
- int wstat;
- ptid_t saved_tid;
- ptid_t ptid;
+/* Select the LWP (if any) that is currently being single-stepped. */
- if (lwp->stopped)
- return;
+static int
+select_singlestep_lwp_callback (struct inferior_list_entry *entry, void *data)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lp = get_thread_lwp (thread);
- saved_inferior = current_inferior;
- if (saved_inferior != NULL)
- saved_tid = ((struct inferior_list_entry *) saved_inferior)->id;
+ if (thread->last_status.kind == TARGET_WAITKIND_IGNORE
+ && thread->last_resume_kind == resume_step
+ && lp->status_pending_p)
+ return 1;
else
- saved_tid = null_ptid; /* avoid bogus unused warning */
+ return 0;
+}
+
+/* Select the Nth LWP that has had an event. */
+
+static int
+select_event_lwp_callback (struct inferior_list_entry *entry, void *data)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lp = get_thread_lwp (thread);
+ int *selector = data;
+
+ gdb_assert (selector != NULL);
- ptid = lwp->head.id;
+ /* Select only resumed LWPs that have an event pending. */
+ if (thread->last_status.kind == TARGET_WAITKIND_IGNORE
+ && lp->status_pending_p)
+ if ((*selector)-- == 0)
+ return 1;
+
+ return 0;
+}
- linux_wait_for_event (ptid, &wstat, __WALL);
+/* Select one LWP out of those that have events pending. */
- /* If we stopped with a non-SIGSTOP signal, save it for later
- and record the pending SIGSTOP. If the process exited, just
- return. */
- if (WIFSTOPPED (wstat)
- && WSTOPSIG (wstat) != SIGSTOP)
+static void
+select_event_lwp (struct lwp_info **orig_lp)
+{
+ int num_events = 0;
+ int random_selector;
+ struct thread_info *event_thread = NULL;
+
+ /* In all-stop, give preference to the LWP that is being
+ single-stepped. There will be at most one, and it's the LWP that
+ the core is most interested in. If we didn't do this, then we'd
+ have to handle pending step SIGTRAPs somehow in case the core
+ later continues the previously-stepped thread, otherwise we'd
+ report the pending SIGTRAP, and the core, not having stepped the
+ thread, wouldn't understand what the trap was for, and therefore
+ would report it to the user as a random signal. */
+ if (!non_stop)
{
- if (debug_threads)
- fprintf (stderr, "LWP %ld stopped with non-sigstop status %06x\n",
- lwpid_of (lwp), wstat);
-
- /* Do not leave a pending single-step finish to be reported to
- the client. The client will give us a new action for this
- thread, possibly a continue request --- otherwise, the client
- would consider this pending SIGTRAP reported later a spurious
- signal. */
- if (WSTOPSIG (wstat) == SIGTRAP
- && lwp->stepping
- && !linux_stopped_by_watchpoint ())
+ event_thread
+ = (struct thread_info *) find_inferior (&all_threads,
+ select_singlestep_lwp_callback,
+ NULL);
+ if (event_thread != NULL)
{
if (debug_threads)
- fprintf (stderr, " single-step SIGTRAP ignored\n");
+ debug_printf ("SEL: Select single-step %s\n",
+ target_pid_to_str (ptid_of (event_thread)));
}
- else
- {
- lwp->status_pending_p = 1;
- lwp->status_pending = wstat;
- }
- lwp->stop_expected = 1;
}
- else if (!WIFSTOPPED (wstat))
+ if (event_thread == NULL)
{
- if (debug_threads)
- fprintf (stderr, "Process %ld exited while stopping LWPs\n",
- lwpid_of (lwp));
-
- /* Leave this status pending for the next time we're able to
- report it. In the mean time, we'll report this lwp as dead
- to GDB, so GDB doesn't try to read registers and memory from
- it. */
- mark_lwp_dead (lwp, wstat);
+ /* No single-stepping LWP. Select one at random, out of those
+ which have had events. */
+
+ /* First see how many events we have. */
+ find_inferior (&all_threads, count_events_callback, &num_events);
+ gdb_assert (num_events > 0);
+
+ /* Now randomly pick a LWP out of those that have had
+ events. */
+ random_selector = (int)
+ ((num_events * (double) rand ()) / (RAND_MAX + 1.0));
+
+ if (debug_threads && num_events > 1)
+ debug_printf ("SEL: Found %d SIGTRAP events, selecting #%d\n",
+ num_events, random_selector);
+
+ event_thread
+ = (struct thread_info *) find_inferior (&all_threads,
+ select_event_lwp_callback,
+ &random_selector);
}
- if (saved_inferior == NULL || linux_thread_alive (saved_tid))
- current_inferior = saved_inferior;
- else
+ if (event_thread != NULL)
{
- if (debug_threads)
- fprintf (stderr, "Previously current thread died.\n");
+ struct lwp_info *event_lp = get_thread_lwp (event_thread);
- if (non_stop)
- {
- /* We can't change the current inferior behind GDB's back,
- otherwise, a subsequent command may apply to the wrong
- process. */
- current_inferior = NULL;
- }
- else
- {
- /* Set a valid thread as current. */
- set_desired_inferior (0);
- }
+ /* Switch the event LWP. */
+ *orig_lp = event_lp;
}
}
-static void
-stop_all_lwps (void)
+/* Decrement the suspend count of an LWP. */
+
+static int
+unsuspend_one_lwp (struct inferior_list_entry *entry, void *except)
{
- stopping_threads = 1;
- for_each_inferior (&all_lwps, send_sigstop);
- for_each_inferior (&all_lwps, wait_for_sigstop);
- stopping_threads = 0;
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ /* Ignore EXCEPT. */
+ if (lwp == except)
+ return 0;
+
+ lwp->suspended--;
+
+ gdb_assert (lwp->suspended >= 0);
+ return 0;
}
-/* Resume execution of the inferior process.
- If STEP is nonzero, single-step it.
- If SIGNAL is nonzero, give it that signal. */
+/* Decrement the suspend count of all LWPs, except EXCEPT, if non
+ NULL. */
static void
-linux_resume_one_lwp (struct lwp_info *lwp,
- int step, int signal, siginfo_t *info)
+unsuspend_all_lwps (struct lwp_info *except)
{
- struct thread_info *saved_inferior;
+ find_inferior (&all_threads, unsuspend_one_lwp, except);
+}
- if (lwp->stopped == 0)
- return;
+static void move_out_of_jump_pad_callback (struct inferior_list_entry *entry);
+static int stuck_in_jump_pad_callback (struct inferior_list_entry *entry,
+ void *data);
+static int lwp_running (struct inferior_list_entry *entry, void *data);
+static ptid_t linux_wait_1 (ptid_t ptid,
+ struct target_waitstatus *ourstatus,
+ int target_options);
+
+/* Stabilize threads (move out of jump pads).
+
+ If a thread is midway collecting a fast tracepoint, we need to
+ finish the collection and move it out of the jump pad before
+ reporting the signal.
+
+ This avoids recursion while collecting (when a signal arrives
+ midway, and the signal handler itself collects), which would trash
+ the trace buffer. In case the user set a breakpoint in a signal
+ handler, this avoids the backtrace showing the jump pad, etc..
+ Most importantly, there are certain things we can't do safely if
+ threads are stopped in a jump pad (or in its callee's). For
+ example:
+
+ - starting a new trace run. A thread still collecting the
+ previous run, could trash the trace buffer when resumed. The trace
+ buffer control structures would have been reset but the thread had
+ no way to tell. The thread could even midway memcpy'ing to the
+ buffer, which would mean that when resumed, it would clobber the
+ trace buffer that had been set for a new run.
+
+ - we can't rewrite/reuse the jump pads for new tracepoints
+ safely. Say you do tstart while a thread is stopped midway while
+ collecting. When the thread is later resumed, it finishes the
+ collection, and returns to the jump pad, to execute the original
+ instruction that was under the tracepoint jump at the time the
+ older run had been started. If the jump pad had been rewritten
+ since for something else in the new run, the thread would now
+ execute the wrong / random instructions. */
- /* If we have pending signals or status, and a new signal, enqueue the
- signal. Also enqueue the signal if we are waiting to reinsert a
- breakpoint; it will be picked up again below. */
- if (signal != 0
- && (lwp->status_pending_p || lwp->pending_signals != NULL
- || lwp->bp_reinsert != 0))
+static void
+linux_stabilize_threads (void)
+{
+ struct thread_info *saved_thread;
+ struct thread_info *thread_stuck;
+
+ thread_stuck
+ = (struct thread_info *) find_inferior (&all_threads,
+ stuck_in_jump_pad_callback,
+ NULL);
+ if (thread_stuck != NULL)
{
- struct pending_signals *p_sig;
- p_sig = xmalloc (sizeof (*p_sig));
- p_sig->prev = lwp->pending_signals;
- p_sig->signal = signal;
- if (info == NULL)
- memset (&p_sig->info, 0, sizeof (siginfo_t));
- else
- memcpy (&p_sig->info, info, sizeof (siginfo_t));
- lwp->pending_signals = p_sig;
+ if (debug_threads)
+ debug_printf ("can't stabilize, LWP %ld is stuck in jump pad\n",
+ lwpid_of (thread_stuck));
+ return;
}
- if (lwp->status_pending_p && !check_removed_breakpoint (lwp))
- return;
-
- saved_inferior = current_inferior;
- current_inferior = get_lwp_thread (lwp);
+ saved_thread = current_thread;
- if (debug_threads)
- fprintf (stderr, "Resuming lwp %ld (%s, signal %d, stop %s)\n",
- lwpid_of (lwp), step ? "step" : "continue", signal,
- lwp->stop_expected ? "expected" : "not expected");
+ stabilizing_threads = 1;
- /* This bit needs some thinking about. If we get a signal that
- we must report while a single-step reinsert is still pending,
- we often end up resuming the thread. It might be better to
- (ew) allow a stack of pending events; then we could be sure that
- the reinsert happened right away and not lose any signals.
+ /* Kick 'em all. */
+ for_each_inferior (&all_threads, move_out_of_jump_pad_callback);
- Making this stack would also shrink the window in which breakpoints are
- uninserted (see comment in linux_wait_for_lwp) but not enough for
- complete correctness, so it won't solve that problem. It may be
- worthwhile just to solve this one, however. */
- if (lwp->bp_reinsert != 0)
+ /* Loop until all are stopped out of the jump pads. */
+ while (find_inferior (&all_threads, lwp_running, NULL) != NULL)
{
- if (debug_threads)
- fprintf (stderr, " pending reinsert at %08lx", (long)lwp->bp_reinsert);
- if (step == 0)
- fprintf (stderr, "BAD - reinserting but not stepping.\n");
- step = 1;
+ struct target_waitstatus ourstatus;
+ struct lwp_info *lwp;
+ int wstat;
- /* Postpone any pending signal. It was enqueued above. */
- signal = 0;
- }
+ /* Note that we go through the full wait even loop. While
+ moving threads out of jump pad, we need to be able to step
+ over internal breakpoints and such. */
+ linux_wait_1 (minus_one_ptid, &ourstatus, 0);
- check_removed_breakpoint (lwp);
+ if (ourstatus.kind == TARGET_WAITKIND_STOPPED)
+ {
+ lwp = get_thread_lwp (current_thread);
- if (debug_threads && the_low_target.get_pc != NULL)
- {
- struct regcache *regcache = get_thread_regcache (current_inferior, 1);
- CORE_ADDR pc = (*the_low_target.get_pc) (regcache);
- fprintf (stderr, " resuming from pc 0x%lx\n", (long) pc);
- }
+ /* Lock it. */
+ lwp->suspended++;
- /* If we have pending signals, consume one unless we are trying to reinsert
- a breakpoint. */
- if (lwp->pending_signals != NULL && lwp->bp_reinsert == 0)
- {
- struct pending_signals **p_sig;
-
- p_sig = &lwp->pending_signals;
- while ((*p_sig)->prev != NULL)
- p_sig = &(*p_sig)->prev;
-
- signal = (*p_sig)->signal;
- if ((*p_sig)->info.si_signo != 0)
- ptrace (PTRACE_SETSIGINFO, lwpid_of (lwp), 0, &(*p_sig)->info);
-
- free (*p_sig);
- *p_sig = NULL;
+ if (ourstatus.value.sig != GDB_SIGNAL_0
+ || current_thread->last_resume_kind == resume_stop)
+ {
+ wstat = W_STOPCODE (gdb_signal_to_host (ourstatus.value.sig));
+ enqueue_one_deferred_signal (lwp, &wstat);
+ }
+ }
}
- if (the_low_target.prepare_to_resume != NULL)
- the_low_target.prepare_to_resume (lwp);
+ find_inferior (&all_threads, unsuspend_one_lwp, NULL);
- regcache_invalidate_one ((struct inferior_list_entry *)
- get_lwp_thread (lwp));
- errno = 0;
- lwp->stopped = 0;
- lwp->stepping = step;
- ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (lwp), 0,
- /* Coerce to a uintptr_t first to avoid potential gcc warning
- of coercing an 8 byte integer to a 4 byte pointer. */
- (PTRACE_ARG4_TYPE) (uintptr_t) signal);
+ stabilizing_threads = 0;
- current_inferior = saved_inferior;
- if (errno)
- {
- /* ESRCH from ptrace either means that the thread was already
- running (an error) or that it is gone (a race condition). If
- it's gone, we will get a notification the next time we wait,
- so we can ignore the error. We could differentiate these
- two, but it's tricky without waiting; the thread still exists
- as a zombie, so sending it signal 0 would succeed. So just
- ignore ESRCH. */
- if (errno == ESRCH)
- return;
+ current_thread = saved_thread;
- perror_with_name ("ptrace");
+ if (debug_threads)
+ {
+ thread_stuck
+ = (struct thread_info *) find_inferior (&all_threads,
+ stuck_in_jump_pad_callback,
+ NULL);
+ if (thread_stuck != NULL)
+ debug_printf ("couldn't stabilize, LWP %ld got stuck in jump pad\n",
+ lwpid_of (thread_stuck));
}
}
-struct thread_resume_array
-{
- struct thread_resume *resume;
- size_t n;
-};
+static void async_file_mark (void);
-/* This function is called once per thread. We look up the thread
- in RESUME_PTR, and mark the thread with a pointer to the appropriate
- resume request.
+/* Convenience function that is called when the kernel reports an
+ event that is not passed out to GDB. */
- This algorithm is O(threads * resume elements), but resume elements
- is small (and will remain small at least until GDB supports thread
- suspension). */
-static int
-linux_set_resume_request (struct inferior_list_entry *entry, void *arg)
+static ptid_t
+ignore_event (struct target_waitstatus *ourstatus)
{
- struct lwp_info *lwp;
- struct thread_info *thread;
- int ndx;
- struct thread_resume_array *r;
-
- thread = (struct thread_info *) entry;
- lwp = get_thread_lwp (thread);
- r = arg;
-
- for (ndx = 0; ndx < r->n; ndx++)
- {
- ptid_t ptid = r->resume[ndx].thread;
- if (ptid_equal (ptid, minus_one_ptid)
- || ptid_equal (ptid, entry->id)
- || (ptid_is_pid (ptid)
- && (ptid_get_pid (ptid) == pid_of (lwp)))
- || (ptid_get_lwp (ptid) == -1
- && (ptid_get_pid (ptid) == pid_of (lwp))))
- {
- lwp->resume = &r->resume[ndx];
- return 0;
- }
- }
-
- /* No resume action for this thread. */
- lwp->resume = NULL;
+ /* If we got an event, there may still be others, as a single
+ SIGCHLD can indicate more than one child stopped. This forces
+ another target_wait call. */
+ async_file_mark ();
- return 0;
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ return null_ptid;
}
+/* Return non-zero if WAITSTATUS reflects an extended linux
+ event. Otherwise, return zero. */
-/* Set *FLAG_P if this lwp has an interesting status pending. */
static int
-resume_status_pending_p (struct inferior_list_entry *entry, void *flag_p)
+extended_event_reported (const struct target_waitstatus *waitstatus)
{
- struct lwp_info *lwp = (struct lwp_info *) entry;
-
- /* LWPs which will not be resumed are not interesting, because
- we might not wait for them next time through linux_wait. */
- if (lwp->resume == NULL)
+ if (waitstatus == NULL)
return 0;
- /* If this thread has a removed breakpoint, we won't have any
- events to report later, so check now. check_removed_breakpoint
- may clear status_pending_p. We avoid calling check_removed_breakpoint
- for any thread that we are not otherwise going to resume - this
- lets us preserve stopped status when two threads hit a breakpoint.
- GDB removes the breakpoint to single-step a particular thread
- past it, then re-inserts it and resumes all threads. We want
- to report the second thread without resuming it in the interim. */
- if (lwp->status_pending_p)
- check_removed_breakpoint (lwp);
+ return (waitstatus->kind == TARGET_WAITKIND_FORKED);
+}
- if (lwp->status_pending_p)
- * (int *) flag_p = 1;
+/* Wait for process, returns status. */
- return 0;
-}
+static ptid_t
+linux_wait_1 (ptid_t ptid,
+ struct target_waitstatus *ourstatus, int target_options)
+{
+ int w;
+ struct lwp_info *event_child;
+ int options;
+ int pid;
+ int step_over_finished;
+ int bp_explains_trap;
+ int maybe_internal_trap;
+ int report_to_gdb;
+ int trace_event;
+ int in_step_range;
-/* This function is called once per thread. We check the thread's resume
- request, which will tell us whether to resume, step, or leave the thread
- stopped; and what signal, if any, it should be sent.
+ if (debug_threads)
+ {
+ debug_enter ();
+ debug_printf ("linux_wait_1: [%s]\n", target_pid_to_str (ptid));
+ }
- For threads which we aren't explicitly told otherwise, we preserve
- the stepping flag; this is used for stepping over gdbserver-placed
- breakpoints.
+ /* Translate generic target options into linux options. */
+ options = __WALL;
+ if (target_options & TARGET_WNOHANG)
+ options |= WNOHANG;
- If pending_flags was set in any thread, we queue any needed
- signals, since we won't actually resume. We already have a pending
- event to report, so we don't need to preserve any step requests;
- they should be re-issued if necessary. */
+ bp_explains_trap = 0;
+ trace_event = 0;
+ in_step_range = 0;
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
-static int
-linux_resume_one_thread (struct inferior_list_entry *entry, void *arg)
-{
- struct lwp_info *lwp;
- struct thread_info *thread;
- int step;
- int pending_flag = * (int *) arg;
+ if (ptid_equal (step_over_bkpt, null_ptid))
+ pid = linux_wait_for_event (ptid, &w, options);
+ else
+ {
+ if (debug_threads)
+ debug_printf ("step_over_bkpt set [%s], doing a blocking wait\n",
+ target_pid_to_str (step_over_bkpt));
+ pid = linux_wait_for_event (step_over_bkpt, &w, options & ~WNOHANG);
+ }
- thread = (struct thread_info *) entry;
- lwp = get_thread_lwp (thread);
+ if (pid == 0)
+ {
+ gdb_assert (target_options & TARGET_WNOHANG);
- if (lwp->resume == NULL)
- return 0;
+ if (debug_threads)
+ {
+ debug_printf ("linux_wait_1 ret = null_ptid, "
+ "TARGET_WAITKIND_IGNORE\n");
+ debug_exit ();
+ }
- if (lwp->resume->kind == resume_stop)
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ return null_ptid;
+ }
+ else if (pid == -1)
{
if (debug_threads)
- fprintf (stderr, "suspending LWP %ld\n", lwpid_of (lwp));
+ {
+ debug_printf ("linux_wait_1 ret = null_ptid, "
+ "TARGET_WAITKIND_NO_RESUMED\n");
+ debug_exit ();
+ }
- if (!lwp->stopped)
+ ourstatus->kind = TARGET_WAITKIND_NO_RESUMED;
+ return null_ptid;
+ }
+
+ event_child = get_thread_lwp (current_thread);
+
+ /* linux_wait_for_event only returns an exit status for the last
+ child of a process. Report it. */
+ if (WIFEXITED (w) || WIFSIGNALED (w))
+ {
+ if (WIFEXITED (w))
{
- if (debug_threads)
- fprintf (stderr, "running -> suspending LWP %ld\n", lwpid_of (lwp));
+ ourstatus->kind = TARGET_WAITKIND_EXITED;
+ ourstatus->value.integer = WEXITSTATUS (w);
- lwp->suspended = 1;
- send_sigstop (&lwp->head);
+ if (debug_threads)
+ {
+ debug_printf ("linux_wait_1 ret = %s, exited with "
+ "retcode %d\n",
+ target_pid_to_str (ptid_of (current_thread)),
+ WEXITSTATUS (w));
+ debug_exit ();
+ }
}
else
{
+ ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+ ourstatus->value.sig = gdb_signal_from_host (WTERMSIG (w));
+
if (debug_threads)
{
- if (lwp->suspended)
- fprintf (stderr, "already stopped/suspended LWP %ld\n",
- lwpid_of (lwp));
- else
- fprintf (stderr, "already stopped/not suspended LWP %ld\n",
- lwpid_of (lwp));
+ debug_printf ("linux_wait_1 ret = %s, terminated with "
+ "signal %d\n",
+ target_pid_to_str (ptid_of (current_thread)),
+ WTERMSIG (w));
+ debug_exit ();
}
-
- /* Make sure we leave the LWP suspended, so we don't try to
- resume it without GDB telling us to. FIXME: The LWP may
- have been stopped in an internal event that was not meant
- to be notified back to GDB (e.g., gdbserver breakpoint),
- so we should be reporting a stop event in that case
- too. */
- lwp->suspended = 1;
}
- /* For stop requests, we're done. */
- lwp->resume = NULL;
- return 0;
+ return ptid_of (current_thread);
}
- else
- lwp->suspended = 0;
-
- /* If this thread which is about to be resumed has a pending status,
- then don't resume any threads - we can just report the pending
- status. Make sure to queue any signals that would otherwise be
- sent. In all-stop mode, we do this decision based on if *any*
- thread has a pending status. */
- if (non_stop)
- resume_status_pending_p (&lwp->head, &pending_flag);
- if (!pending_flag)
+ /* If step-over executes a breakpoint instruction, it means a
+ gdb/gdbserver breakpoint had been planted on top of a permanent
+ breakpoint. The PC has been adjusted by
+ check_stopped_by_breakpoint to point at the breakpoint address.
+ Advance the PC manually past the breakpoint, otherwise the
+ program would keep trapping the permanent breakpoint forever. */
+ if (!ptid_equal (step_over_bkpt, null_ptid)
+ && event_child->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT)
{
+ unsigned int increment_pc = the_low_target.breakpoint_len;
+
if (debug_threads)
- fprintf (stderr, "resuming LWP %ld\n", lwpid_of (lwp));
+ {
+ debug_printf ("step-over for %s executed software breakpoint\n",
+ target_pid_to_str (ptid_of (current_thread)));
+ }
- if (ptid_equal (lwp->resume->thread, minus_one_ptid)
- && lwp->stepping
- && lwp->pending_is_breakpoint)
- step = 1;
- else
- step = (lwp->resume->kind == resume_step);
+ if (increment_pc != 0)
+ {
+ struct regcache *regcache
+ = get_thread_regcache (current_thread, 1);
- linux_resume_one_lwp (lwp, step, lwp->resume->sig, NULL);
+ event_child->stop_pc += increment_pc;
+ (*the_low_target.set_pc) (regcache, event_child->stop_pc);
+
+ if (!(*the_low_target.breakpoint_at) (event_child->stop_pc))
+ event_child->stop_reason = TARGET_STOPPED_BY_NO_REASON;
+ }
+ }
+
+ /* If this event was not handled before, and is not a SIGTRAP, we
+ report it. SIGILL and SIGSEGV are also treated as traps in case
+ a breakpoint is inserted at the current PC. If this target does
+ not support internal breakpoints at all, we also report the
+ SIGTRAP without further processing; it's of no concern to us. */
+ maybe_internal_trap
+ = (supports_breakpoints ()
+ && (WSTOPSIG (w) == SIGTRAP
+ || ((WSTOPSIG (w) == SIGILL
+ || WSTOPSIG (w) == SIGSEGV)
+ && (*the_low_target.breakpoint_at) (event_child->stop_pc))));
+
+ if (maybe_internal_trap)
+ {
+ /* Handle anything that requires bookkeeping before deciding to
+ report the event or continue waiting. */
+
+ /* First check if we can explain the SIGTRAP with an internal
+ breakpoint, or if we should possibly report the event to GDB.
+ Do this before anything that may remove or insert a
+ breakpoint. */
+ bp_explains_trap = breakpoint_inserted_here (event_child->stop_pc);
+
+ /* We have a SIGTRAP, possibly a step-over dance has just
+ finished. If so, tweak the state machine accordingly,
+ reinsert breakpoints and delete any reinsert (software
+ single-step) breakpoints. */
+ step_over_finished = finish_step_over (event_child);
+
+ /* Now invoke the callbacks of any internal breakpoints there. */
+ check_breakpoints (event_child->stop_pc);
+
+ /* Handle tracepoint data collecting. This may overflow the
+ trace buffer, and cause a tracing stop, removing
+ breakpoints. */
+ trace_event = handle_tracepoints (event_child);
+
+ if (bp_explains_trap)
+ {
+ /* If we stepped or ran into an internal breakpoint, we've
+ already handled it. So next time we resume (from this
+ PC), we should step over it. */
+ if (debug_threads)
+ debug_printf ("Hit a gdbserver breakpoint.\n");
+
+ if (breakpoint_here (event_child->stop_pc))
+ event_child->need_step_over = 1;
+ }
}
else
+ {
+ /* We have some other signal, possibly a step-over dance was in
+ progress, and it should be cancelled too. */
+ step_over_finished = finish_step_over (event_child);
+ }
+
+ /* We have all the data we need. Either report the event to GDB, or
+ resume threads and keep waiting for more. */
+
+ /* If we're collecting a fast tracepoint, finish the collection and
+ move out of the jump pad before delivering a signal. See
+ linux_stabilize_threads. */
+
+ if (WIFSTOPPED (w)
+ && WSTOPSIG (w) != SIGTRAP
+ && supports_fast_tracepoints ()
+ && agent_loaded_p ())
{
if (debug_threads)
- fprintf (stderr, "leaving LWP %ld stopped\n", lwpid_of (lwp));
+ debug_printf ("Got signal %d for LWP %ld. Check if we need "
+ "to defer or adjust it.\n",
+ WSTOPSIG (w), lwpid_of (current_thread));
- /* If we have a new signal, enqueue the signal. */
- if (lwp->resume->sig != 0)
+ /* Allow debugging the jump pad itself. */
+ if (current_thread->last_resume_kind != resume_step
+ && maybe_move_out_of_jump_pad (event_child, &w))
{
- struct pending_signals *p_sig;
- p_sig = xmalloc (sizeof (*p_sig));
- p_sig->prev = lwp->pending_signals;
- p_sig->signal = lwp->resume->sig;
- memset (&p_sig->info, 0, sizeof (siginfo_t));
+ enqueue_one_deferred_signal (event_child, &w);
- /* If this is the same signal we were previously stopped by,
- make sure to queue its siginfo. We can ignore the return
- value of ptrace; if it fails, we'll skip
- PTRACE_SETSIGINFO. */
- if (WIFSTOPPED (lwp->last_status)
- && WSTOPSIG (lwp->last_status) == lwp->resume->sig)
- ptrace (PTRACE_GETSIGINFO, lwpid_of (lwp), 0, &p_sig->info);
+ if (debug_threads)
+ debug_printf ("Signal %d for LWP %ld deferred (in jump pad)\n",
+ WSTOPSIG (w), lwpid_of (current_thread));
- lwp->pending_signals = p_sig;
+ linux_resume_one_lwp (event_child, 0, 0, NULL);
+
+ return ignore_event (ourstatus);
}
}
- lwp->resume = NULL;
- return 0;
-}
+ if (event_child->collecting_fast_tracepoint)
+ {
+ if (debug_threads)
+ debug_printf ("LWP %ld was trying to move out of the jump pad (%d). "
+ "Check if we're already there.\n",
+ lwpid_of (current_thread),
+ event_child->collecting_fast_tracepoint);
-static void
-linux_resume (struct thread_resume *resume_info, size_t n)
-{
- int pending_flag;
- struct thread_resume_array array = { resume_info, n };
+ trace_event = 1;
- find_inferior (&all_threads, linux_set_resume_request, &array);
+ event_child->collecting_fast_tracepoint
+ = linux_fast_tracepoint_collecting (event_child, NULL);
- /* If there is a thread which would otherwise be resumed, which
- has a pending status, then don't resume any threads - we can just
- report the pending status. Make sure to queue any signals
- that would otherwise be sent. In non-stop mode, we'll apply this
- logic to each thread individually. */
- pending_flag = 0;
- if (!non_stop)
- find_inferior (&all_lwps, resume_status_pending_p, &pending_flag);
+ if (event_child->collecting_fast_tracepoint != 1)
+ {
+ /* No longer need this breakpoint. */
+ if (event_child->exit_jump_pad_bkpt != NULL)
+ {
+ if (debug_threads)
+ debug_printf ("No longer need exit-jump-pad bkpt; removing it."
+ "stopping all threads momentarily.\n");
- if (debug_threads)
- {
- if (pending_flag)
- fprintf (stderr, "Not resuming, pending status\n");
- else
- fprintf (stderr, "Resuming, no pending status\n");
- }
+ /* Other running threads could hit this breakpoint.
+ We don't handle moribund locations like GDB does,
+ instead we always pause all threads when removing
+ breakpoints, so that any step-over or
+ decr_pc_after_break adjustment is always taken
+ care of while the breakpoint is still
+ inserted. */
+ stop_all_lwps (1, event_child);
- find_inferior (&all_threads, linux_resume_one_thread, &pending_flag);
-}
+ delete_breakpoint (event_child->exit_jump_pad_bkpt);
+ event_child->exit_jump_pad_bkpt = NULL;
-#ifdef HAVE_LINUX_USRREGS
+ unstop_all_lwps (1, event_child);
-int
-register_addr (int regnum)
-{
- int addr;
+ gdb_assert (event_child->suspended >= 0);
+ }
+ }
- if (regnum < 0 || regnum >= the_low_target.num_regs)
- error ("Invalid register number %d.", regnum);
+ if (event_child->collecting_fast_tracepoint == 0)
+ {
+ if (debug_threads)
+ debug_printf ("fast tracepoint finished "
+ "collecting successfully.\n");
- addr = the_low_target.regmap[regnum];
+ /* We may have a deferred signal to report. */
+ if (dequeue_one_deferred_signal (event_child, &w))
+ {
+ if (debug_threads)
+ debug_printf ("dequeued one signal.\n");
+ }
+ else
+ {
+ if (debug_threads)
+ debug_printf ("no deferred signals.\n");
- return addr;
-}
+ if (stabilizing_threads)
+ {
+ ourstatus->kind = TARGET_WAITKIND_STOPPED;
+ ourstatus->value.sig = GDB_SIGNAL_0;
-/* Fetch one register. */
-static void
-fetch_register (struct regcache *regcache, int regno)
-{
- CORE_ADDR regaddr;
- int i, size;
- char *buf;
- int pid;
+ if (debug_threads)
+ {
+ debug_printf ("linux_wait_1 ret = %s, stopped "
+ "while stabilizing threads\n",
+ target_pid_to_str (ptid_of (current_thread)));
+ debug_exit ();
+ }
- if (regno >= the_low_target.num_regs)
- return;
- if ((*the_low_target.cannot_fetch_register) (regno))
- return;
+ return ptid_of (current_thread);
+ }
+ }
+ }
+ }
- regaddr = register_addr (regno);
- if (regaddr == -1)
- return;
+ /* Check whether GDB would be interested in this event. */
+
+ /* If GDB is not interested in this signal, don't stop other
+ threads, and don't report it to GDB. Just resume the inferior
+ right away. We do this for threading-related signals as well as
+ any that GDB specifically requested we ignore. But never ignore
+ SIGSTOP if we sent it ourselves, and do not ignore signals when
+ stepping - they may require special handling to skip the signal
+ handler. Also never ignore signals that could be caused by a
+ breakpoint. */
+ /* FIXME drow/2002-06-09: Get signal numbers from the inferior's
+ thread library? */
+ if (WIFSTOPPED (w)
+ && current_thread->last_resume_kind != resume_step
+ && (
+#if defined (USE_THREAD_DB) && !defined (__ANDROID__)
+ (current_process ()->priv->thread_db != NULL
+ && (WSTOPSIG (w) == __SIGRTMIN
+ || WSTOPSIG (w) == __SIGRTMIN + 1))
+ ||
+#endif
+ (pass_signals[gdb_signal_from_host (WSTOPSIG (w))]
+ && !(WSTOPSIG (w) == SIGSTOP
+ && current_thread->last_resume_kind == resume_stop)
+ && !linux_wstatus_maybe_breakpoint (w))))
+ {
+ siginfo_t info, *info_p;
- pid = lwpid_of (get_thread_lwp (current_inferior));
- size = ((register_size (regno) + sizeof (PTRACE_XFER_TYPE) - 1)
- & - sizeof (PTRACE_XFER_TYPE));
- buf = alloca (size);
- for (i = 0; i < size; i += sizeof (PTRACE_XFER_TYPE))
+ if (debug_threads)
+ debug_printf ("Ignored signal %d for LWP %ld.\n",
+ WSTOPSIG (w), lwpid_of (current_thread));
+
+ if (ptrace (PTRACE_GETSIGINFO, lwpid_of (current_thread),
+ (PTRACE_TYPE_ARG3) 0, &info) == 0)
+ info_p = &info;
+ else
+ info_p = NULL;
+ linux_resume_one_lwp (event_child, event_child->stepping,
+ WSTOPSIG (w), info_p);
+ return ignore_event (ourstatus);
+ }
+
+ /* Note that all addresses are always "out of the step range" when
+ there's no range to begin with. */
+ in_step_range = lwp_in_step_range (event_child);
+
+ /* If GDB wanted this thread to single step, and the thread is out
+ of the step range, we always want to report the SIGTRAP, and let
+ GDB handle it. Watchpoints should always be reported. So should
+ signals we can't explain. A SIGTRAP we can't explain could be a
+ GDB breakpoint --- we may or not support Z0 breakpoints. If we
+ do, we're be able to handle GDB breakpoints on top of internal
+ breakpoints, by handling the internal breakpoint and still
+ reporting the event to GDB. If we don't, we're out of luck, GDB
+ won't see the breakpoint hit. */
+ report_to_gdb = (!maybe_internal_trap
+ || (current_thread->last_resume_kind == resume_step
+ && !in_step_range)
+ || event_child->stop_reason == TARGET_STOPPED_BY_WATCHPOINT
+ || (!step_over_finished && !in_step_range
+ && !bp_explains_trap && !trace_event)
+ || (gdb_breakpoint_here (event_child->stop_pc)
+ && gdb_condition_true_at_breakpoint (event_child->stop_pc)
+ && gdb_no_commands_at_breakpoint (event_child->stop_pc))
+ || extended_event_reported (&event_child->waitstatus));
+
+ run_breakpoint_commands (event_child->stop_pc);
+
+ /* We found no reason GDB would want us to stop. We either hit one
+ of our own breakpoints, or finished an internal step GDB
+ shouldn't know about. */
+ if (!report_to_gdb)
{
- errno = 0;
- *(PTRACE_XFER_TYPE *) (buf + i) =
- ptrace (PTRACE_PEEKUSER, pid,
- /* Coerce to a uintptr_t first to avoid potential gcc warning
- of coercing an 8 byte integer to a 4 byte pointer. */
- (PTRACE_ARG3_TYPE) (uintptr_t) regaddr, 0);
- regaddr += sizeof (PTRACE_XFER_TYPE);
- if (errno != 0)
+ if (debug_threads)
{
- /* Warning, not error, in case we are attached; sometimes the
- kernel doesn't let us at the registers. */
- char *err = strerror (errno);
- char *msg = alloca (strlen (err) + 128);
- sprintf (msg, "reading register %d: %s", regno, err);
- error (msg);
- goto error_exit;
+ if (bp_explains_trap)
+ debug_printf ("Hit a gdbserver breakpoint.\n");
+ if (step_over_finished)
+ debug_printf ("Step-over finished.\n");
+ if (trace_event)
+ debug_printf ("Tracepoint event.\n");
+ if (lwp_in_step_range (event_child))
+ debug_printf ("Range stepping pc 0x%s [0x%s, 0x%s).\n",
+ paddress (event_child->stop_pc),
+ paddress (event_child->step_range_start),
+ paddress (event_child->step_range_end));
+ if (extended_event_reported (&event_child->waitstatus))
+ {
+ char *str = target_waitstatus_to_string (ourstatus);
+ debug_printf ("LWP %ld: extended event with waitstatus %s\n",
+ lwpid_of (get_lwp_thread (event_child)), str);
+ xfree (str);
+ }
}
- }
- if (the_low_target.supply_ptrace_register)
- the_low_target.supply_ptrace_register (regcache, regno, buf);
- else
- supply_register (regcache, regno, buf);
-
-error_exit:;
-}
-
-/* Fetch all registers, or just one, from the child process. */
-static void
-usr_fetch_inferior_registers (struct regcache *regcache, int regno)
-{
- if (regno == -1)
- for (regno = 0; regno < the_low_target.num_regs; regno++)
- fetch_register (regcache, regno);
- else
- fetch_register (regcache, regno);
-}
-
-/* Store our register values back into the inferior.
- If REGNO is -1, do this for all registers.
- Otherwise, REGNO specifies which register (so we can save time). */
-static void
-usr_store_inferior_registers (struct regcache *regcache, int regno)
-{
- CORE_ADDR regaddr;
- int i, size;
- char *buf;
- int pid;
+ /* We're not reporting this breakpoint to GDB, so apply the
+ decr_pc_after_break adjustment to the inferior's regcache
+ ourselves. */
- if (regno >= 0)
- {
- if (regno >= the_low_target.num_regs)
- return;
+ if (the_low_target.set_pc != NULL)
+ {
+ struct regcache *regcache
+ = get_thread_regcache (current_thread, 1);
+ (*the_low_target.set_pc) (regcache, event_child->stop_pc);
+ }
- if ((*the_low_target.cannot_store_register) (regno) == 1)
- return;
+ /* We may have finished stepping over a breakpoint. If so,
+ we've stopped and suspended all LWPs momentarily except the
+ stepping one. This is where we resume them all again. We're
+ going to keep waiting, so use proceed, which handles stepping
+ over the next breakpoint. */
+ if (debug_threads)
+ debug_printf ("proceeding all threads.\n");
- regaddr = register_addr (regno);
- if (regaddr == -1)
- return;
- errno = 0;
- size = (register_size (regno) + sizeof (PTRACE_XFER_TYPE) - 1)
- & - sizeof (PTRACE_XFER_TYPE);
- buf = alloca (size);
- memset (buf, 0, size);
+ if (step_over_finished)
+ unsuspend_all_lwps (event_child);
- if (the_low_target.collect_ptrace_register)
- the_low_target.collect_ptrace_register (regcache, regno, buf);
- else
- collect_register (regcache, regno, buf);
+ proceed_all_lwps ();
+ return ignore_event (ourstatus);
+ }
- pid = lwpid_of (get_thread_lwp (current_inferior));
- for (i = 0; i < size; i += sizeof (PTRACE_XFER_TYPE))
+ if (debug_threads)
+ {
+ if (current_thread->last_resume_kind == resume_step)
{
- errno = 0;
- ptrace (PTRACE_POKEUSER, pid,
- /* Coerce to a uintptr_t first to avoid potential gcc warning
- about coercing an 8 byte integer to a 4 byte pointer. */
- (PTRACE_ARG3_TYPE) (uintptr_t) regaddr,
- (PTRACE_ARG4_TYPE) *(PTRACE_XFER_TYPE *) (buf + i));
- if (errno != 0)
- {
- /* At this point, ESRCH should mean the process is
- already gone, in which case we simply ignore attempts
- to change its registers. See also the related
- comment in linux_resume_one_lwp. */
- if (errno == ESRCH)
- return;
-
- if ((*the_low_target.cannot_store_register) (regno) == 0)
- {
- char *err = strerror (errno);
- char *msg = alloca (strlen (err) + 128);
- sprintf (msg, "writing register %d: %s",
- regno, err);
- error (msg);
- return;
- }
- }
- regaddr += sizeof (PTRACE_XFER_TYPE);
+ if (event_child->step_range_start == event_child->step_range_end)
+ debug_printf ("GDB wanted to single-step, reporting event.\n");
+ else if (!lwp_in_step_range (event_child))
+ debug_printf ("Out of step range, reporting event.\n");
}
+ if (event_child->stop_reason == TARGET_STOPPED_BY_WATCHPOINT)
+ debug_printf ("Stopped by watchpoint.\n");
+ else if (gdb_breakpoint_here (event_child->stop_pc))
+ debug_printf ("Stopped by GDB breakpoint.\n");
+ if (debug_threads)
+ debug_printf ("Hit a non-gdbserver trap event.\n");
}
- else
- for (regno = 0; regno < the_low_target.num_regs; regno++)
- usr_store_inferior_registers (regcache, regno);
-}
-#endif /* HAVE_LINUX_USRREGS */
+ /* Alright, we're going to report a stop. */
+ if (!stabilizing_threads)
+ {
+ /* In all-stop, stop all threads. */
+ if (!non_stop)
+ stop_all_lwps (0, NULL);
+
+ /* If we're not waiting for a specific LWP, choose an event LWP
+ from among those that have had events. Giving equal priority
+ to all LWPs that have had events helps prevent
+ starvation. */
+ if (ptid_equal (ptid, minus_one_ptid))
+ {
+ event_child->status_pending_p = 1;
+ event_child->status_pending = w;
-#ifdef HAVE_LINUX_REGSETS
-
-static int
-regsets_fetch_inferior_registers (struct regcache *regcache)
-{
- struct regset_info *regset;
- int saw_general_regs = 0;
- int pid;
-
- regset = target_regsets;
+ select_event_lwp (&event_child);
- pid = lwpid_of (get_thread_lwp (current_inferior));
- while (regset->size >= 0)
- {
- void *buf;
- int res;
+ /* current_thread and event_child must stay in sync. */
+ current_thread = get_lwp_thread (event_child);
- if (regset->size == 0 || disabled_regsets[regset - target_regsets])
- {
- regset ++;
- continue;
+ event_child->status_pending_p = 0;
+ w = event_child->status_pending;
}
- buf = xmalloc (regset->size);
-#ifndef __sparc__
- res = ptrace (regset->get_request, pid, 0, buf);
-#else
- res = ptrace (regset->get_request, pid, buf, 0);
-#endif
- if (res < 0)
+ if (step_over_finished)
{
- if (errno == EIO)
+ if (!non_stop)
{
- /* If we get EIO on a regset, do not try it again for
- this process. */
- disabled_regsets[regset - target_regsets] = 1;
- free (buf);
- continue;
+ /* If we were doing a step-over, all other threads but
+ the stepping one had been paused in start_step_over,
+ with their suspend counts incremented. We don't want
+ to do a full unstop/unpause, because we're in
+ all-stop mode (so we want threads stopped), but we
+ still need to unsuspend the other threads, to
+ decrement their `suspended' count back. */
+ unsuspend_all_lwps (event_child);
}
else
{
- char s[256];
- sprintf (s, "ptrace(regsets_fetch_inferior_registers) PID=%d",
- pid);
- perror (s);
+ /* If we just finished a step-over, then all threads had
+ been momentarily paused. In all-stop, that's fine,
+ we want threads stopped by now anyway. In non-stop,
+ we need to re-resume threads that GDB wanted to be
+ running. */
+ unstop_all_lwps (1, event_child);
}
}
- else if (regset->type == GENERAL_REGS)
- saw_general_regs = 1;
- regset->store_function (regcache, buf);
- regset ++;
- free (buf);
+
+ /* Stabilize threads (move out of jump pads). */
+ if (!non_stop)
+ stabilize_threads ();
}
- if (saw_general_regs)
- return 0;
else
- return 1;
-}
-
-static int
-regsets_store_inferior_registers (struct regcache *regcache)
-{
- struct regset_info *regset;
- int saw_general_regs = 0;
- int pid;
-
- regset = target_regsets;
-
- pid = lwpid_of (get_thread_lwp (current_inferior));
- while (regset->size >= 0)
{
- void *buf;
- int res;
+ /* If we just finished a step-over, then all threads had been
+ momentarily paused. In all-stop, that's fine, we want
+ threads stopped by now anyway. In non-stop, we need to
+ re-resume threads that GDB wanted to be running. */
+ if (step_over_finished)
+ unstop_all_lwps (1, event_child);
+ }
- if (regset->size == 0 || disabled_regsets[regset - target_regsets])
- {
- regset ++;
- continue;
- }
+ if (extended_event_reported (&event_child->waitstatus))
+ {
+ /* If the reported event is a fork, vfork or exec, let GDB know. */
+ ourstatus->kind = event_child->waitstatus.kind;
+ ourstatus->value = event_child->waitstatus.value;
- buf = xmalloc (regset->size);
+ /* Clear the event lwp's waitstatus since we handled it already. */
+ event_child->waitstatus.kind = TARGET_WAITKIND_IGNORE;
+ }
+ else
+ ourstatus->kind = TARGET_WAITKIND_STOPPED;
- /* First fill the buffer with the current register set contents,
- in case there are any items in the kernel's regset that are
- not in gdbserver's regcache. */
-#ifndef __sparc__
- res = ptrace (regset->get_request, pid, 0, buf);
-#else
- res = ptrace (regset->get_request, pid, buf, 0);
-#endif
+ /* Now that we've selected our final event LWP, un-adjust its PC if
+ it was a software breakpoint, and the client doesn't know we can
+ adjust the breakpoint ourselves. */
+ if (event_child->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
+ && !swbreak_feature)
+ {
+ int decr_pc = the_low_target.decr_pc_after_break;
- if (res == 0)
+ if (decr_pc != 0)
{
- /* Then overlay our cached registers on that. */
- regset->fill_function (regcache, buf);
-
- /* Only now do we write the register set. */
-#ifndef __sparc__
- res = ptrace (regset->set_request, pid, 0, buf);
-#else
- res = ptrace (regset->set_request, pid, buf, 0);
-#endif
+ struct regcache *regcache
+ = get_thread_regcache (current_thread, 1);
+ (*the_low_target.set_pc) (regcache, event_child->stop_pc + decr_pc);
}
+ }
- if (res < 0)
- {
- if (errno == EIO)
- {
- /* If we get EIO on a regset, do not try it again for
- this process. */
- disabled_regsets[regset - target_regsets] = 1;
- free (buf);
- continue;
- }
- else if (errno == ESRCH)
- {
- /* At this point, ESRCH should mean the process is
- already gone, in which case we simply ignore attempts
- to change its registers. See also the related
- comment in linux_resume_one_lwp. */
- free (buf);
- return 0;
- }
- else
- {
- perror ("Warning: ptrace(regsets_store_inferior_registers)");
- }
- }
- else if (regset->type == GENERAL_REGS)
- saw_general_regs = 1;
- regset ++;
- free (buf);
+ if (current_thread->last_resume_kind == resume_stop
+ && WSTOPSIG (w) == SIGSTOP)
+ {
+ /* A thread that has been requested to stop by GDB with vCont;t,
+ and it stopped cleanly, so report as SIG0. The use of
+ SIGSTOP is an implementation detail. */
+ ourstatus->value.sig = GDB_SIGNAL_0;
+ }
+ else if (current_thread->last_resume_kind == resume_stop
+ && WSTOPSIG (w) != SIGSTOP)
+ {
+ /* A thread that has been requested to stop by GDB with vCont;t,
+ but, it stopped for other reasons. */
+ ourstatus->value.sig = gdb_signal_from_host (WSTOPSIG (w));
+ }
+ else if (ourstatus->kind == TARGET_WAITKIND_STOPPED)
+ {
+ ourstatus->value.sig = gdb_signal_from_host (WSTOPSIG (w));
}
- if (saw_general_regs)
- return 0;
- else
- return 1;
- return 0;
-}
-#endif /* HAVE_LINUX_REGSETS */
+ gdb_assert (ptid_equal (step_over_bkpt, null_ptid));
+ if (debug_threads)
+ {
+ debug_printf ("linux_wait_1 ret = %s, %d, %d\n",
+ target_pid_to_str (ptid_of (current_thread)),
+ ourstatus->kind, ourstatus->value.sig);
+ debug_exit ();
+ }
-void
-linux_fetch_registers (struct regcache *regcache, int regno)
-{
-#ifdef HAVE_LINUX_REGSETS
- if (regsets_fetch_inferior_registers (regcache) == 0)
- return;
-#endif
-#ifdef HAVE_LINUX_USRREGS
- usr_fetch_inferior_registers (regcache, regno);
-#endif
+ return ptid_of (current_thread);
}
-void
-linux_store_registers (struct regcache *regcache, int regno)
+/* Get rid of any pending event in the pipe. */
+static void
+async_file_flush (void)
{
-#ifdef HAVE_LINUX_REGSETS
- if (regsets_store_inferior_registers (regcache) == 0)
- return;
-#endif
-#ifdef HAVE_LINUX_USRREGS
- usr_store_inferior_registers (regcache, regno);
-#endif
+ int ret;
+ char buf;
+
+ do
+ ret = read (linux_event_pipe[0], &buf, 1);
+ while (ret >= 0 || (ret == -1 && errno == EINTR));
}
+/* Put something in the pipe, so the event loop wakes up. */
+static void
+async_file_mark (void)
+{
+ int ret;
-/* Copy LEN bytes from inferior's memory starting at MEMADDR
- to debugger memory starting at MYADDR. */
+ async_file_flush ();
-static int
-linux_read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
-{
- register int i;
- /* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_XFER_TYPE);
- /* Round ending address up; get number of longwords that makes. */
- register int count
- = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
- / sizeof (PTRACE_XFER_TYPE);
- /* Allocate buffer of that many longwords. */
- register PTRACE_XFER_TYPE *buffer
- = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
- int fd;
- char filename[64];
- int pid = lwpid_of (get_thread_lwp (current_inferior));
+ do
+ ret = write (linux_event_pipe[1], "+", 1);
+ while (ret == 0 || (ret == -1 && errno == EINTR));
- /* Try using /proc. Don't bother for one word. */
- if (len >= 3 * sizeof (long))
- {
- /* We could keep this file open and cache it - possibly one per
- thread. That requires some juggling, but is even faster. */
- sprintf (filename, "/proc/%d/mem", pid);
- fd = open (filename, O_RDONLY | O_LARGEFILE);
- if (fd == -1)
- goto no_proc;
+ /* Ignore EAGAIN. If the pipe is full, the event loop will already
+ be awakened anyway. */
+}
- /* If pread64 is available, use it. It's faster if the kernel
- supports it (only one syscall), and it's 64-bit safe even on
- 32-bit platforms (for instance, SPARC debugging a SPARC64
- application). */
-#ifdef HAVE_PREAD64
- if (pread64 (fd, myaddr, len, memaddr) != len)
-#else
- if (lseek (fd, memaddr, SEEK_SET) == -1 || read (fd, myaddr, len) != len)
-#endif
- {
- close (fd);
- goto no_proc;
- }
+static ptid_t
+linux_wait (ptid_t ptid,
+ struct target_waitstatus *ourstatus, int target_options)
+{
+ ptid_t event_ptid;
- close (fd);
- return 0;
- }
+ /* Flush the async file first. */
+ if (target_is_async_p ())
+ async_file_flush ();
- no_proc:
- /* Read all the longwords */
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+ do
{
- errno = 0;
- /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
- about coercing an 8 byte integer to a 4 byte pointer. */
- buffer[i] = ptrace (PTRACE_PEEKTEXT, pid,
- (PTRACE_ARG3_TYPE) (uintptr_t) addr, 0);
- if (errno)
- return errno;
+ event_ptid = linux_wait_1 (ptid, ourstatus, target_options);
}
+ while ((target_options & TARGET_WNOHANG) == 0
+ && ptid_equal (event_ptid, null_ptid)
+ && ourstatus->kind == TARGET_WAITKIND_IGNORE);
- /* Copy appropriate bytes out of the buffer. */
- memcpy (myaddr,
- (char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
- len);
+ /* If at least one stop was reported, there may be more. A single
+ SIGCHLD can signal more than one child stop. */
+ if (target_is_async_p ()
+ && (target_options & TARGET_WNOHANG) != 0
+ && !ptid_equal (event_ptid, null_ptid))
+ async_file_mark ();
- return 0;
+ return event_ptid;
}
-/* Copy LEN bytes of data from debugger memory at MYADDR
- to inferior's memory at MEMADDR.
- On failure (cannot write the inferior)
- returns the value of errno. */
+/* Send a signal to an LWP. */
static int
-linux_write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len)
+kill_lwp (unsigned long lwpid, int signo)
{
- register int i;
+ /* Use tkill, if possible, in case we are using nptl threads. If tkill
+ fails, then we are not using nptl threads and we should be using kill. */
+
+#ifdef __NR_tkill
+ {
+ static int tkill_failed;
+
+ if (!tkill_failed)
+ {
+ int ret;
+
+ errno = 0;
+ ret = syscall (__NR_tkill, lwpid, signo);
+ if (errno != ENOSYS)
+ return ret;
+ tkill_failed = 1;
+ }
+ }
+#endif
+
+ return kill (lwpid, signo);
+}
+
+void
+linux_stop_lwp (struct lwp_info *lwp)
+{
+ send_sigstop (lwp);
+}
+
+static void
+send_sigstop (struct lwp_info *lwp)
+{
+ int pid;
+
+ pid = lwpid_of (get_lwp_thread (lwp));
+
+ /* If we already have a pending stop signal for this process, don't
+ send another. */
+ if (lwp->stop_expected)
+ {
+ if (debug_threads)
+ debug_printf ("Have pending sigstop for lwp %d\n", pid);
+
+ return;
+ }
+
+ if (debug_threads)
+ debug_printf ("Sending sigstop to lwp %d\n", pid);
+
+ lwp->stop_expected = 1;
+ kill_lwp (pid, SIGSTOP);
+}
+
+static int
+send_sigstop_callback (struct inferior_list_entry *entry, void *except)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ /* Ignore EXCEPT. */
+ if (lwp == except)
+ return 0;
+
+ if (lwp->stopped)
+ return 0;
+
+ send_sigstop (lwp);
+ return 0;
+}
+
+/* Increment the suspend count of an LWP, and stop it, if not stopped
+ yet. */
+static int
+suspend_and_send_sigstop_callback (struct inferior_list_entry *entry,
+ void *except)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ /* Ignore EXCEPT. */
+ if (lwp == except)
+ return 0;
+
+ lwp->suspended++;
+
+ return send_sigstop_callback (entry, except);
+}
+
+static void
+mark_lwp_dead (struct lwp_info *lwp, int wstat)
+{
+ /* It's dead, really. */
+ lwp->dead = 1;
+
+ /* Store the exit status for later. */
+ lwp->status_pending_p = 1;
+ lwp->status_pending = wstat;
+
+ /* Prevent trying to stop it. */
+ lwp->stopped = 1;
+
+ /* No further stops are expected from a dead lwp. */
+ lwp->stop_expected = 0;
+}
+
+/* Wait for all children to stop for the SIGSTOPs we just queued. */
+
+static void
+wait_for_sigstop (void)
+{
+ struct thread_info *saved_thread;
+ ptid_t saved_tid;
+ int wstat;
+ int ret;
+
+ saved_thread = current_thread;
+ if (saved_thread != NULL)
+ saved_tid = saved_thread->entry.id;
+ else
+ saved_tid = null_ptid; /* avoid bogus unused warning */
+
+ if (debug_threads)
+ debug_printf ("wait_for_sigstop: pulling events\n");
+
+ /* Passing NULL_PTID as filter indicates we want all events to be
+ left pending. Eventually this returns when there are no
+ unwaited-for children left. */
+ ret = linux_wait_for_event_filtered (minus_one_ptid, null_ptid,
+ &wstat, __WALL);
+ gdb_assert (ret == -1);
+
+ if (saved_thread == NULL || linux_thread_alive (saved_tid))
+ current_thread = saved_thread;
+ else
+ {
+ if (debug_threads)
+ debug_printf ("Previously current thread died.\n");
+
+ if (non_stop)
+ {
+ /* We can't change the current inferior behind GDB's back,
+ otherwise, a subsequent command may apply to the wrong
+ process. */
+ current_thread = NULL;
+ }
+ else
+ {
+ /* Set a valid thread as current. */
+ set_desired_thread (0);
+ }
+ }
+}
+
+/* Returns true if LWP ENTRY is stopped in a jump pad, and we can't
+ move it out, because we need to report the stop event to GDB. For
+ example, if the user puts a breakpoint in the jump pad, it's
+ because she wants to debug it. */
+
+static int
+stuck_in_jump_pad_callback (struct inferior_list_entry *entry, void *data)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ gdb_assert (lwp->suspended == 0);
+ gdb_assert (lwp->stopped);
+
+ /* Allow debugging the jump pad, gdb_collect, etc.. */
+ return (supports_fast_tracepoints ()
+ && agent_loaded_p ()
+ && (gdb_breakpoint_here (lwp->stop_pc)
+ || lwp->stop_reason == TARGET_STOPPED_BY_WATCHPOINT
+ || thread->last_resume_kind == resume_step)
+ && linux_fast_tracepoint_collecting (lwp, NULL));
+}
+
+static void
+move_out_of_jump_pad_callback (struct inferior_list_entry *entry)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ int *wstat;
+
+ gdb_assert (lwp->suspended == 0);
+ gdb_assert (lwp->stopped);
+
+ wstat = lwp->status_pending_p ? &lwp->status_pending : NULL;
+
+ /* Allow debugging the jump pad, gdb_collect, etc. */
+ if (!gdb_breakpoint_here (lwp->stop_pc)
+ && lwp->stop_reason != TARGET_STOPPED_BY_WATCHPOINT
+ && thread->last_resume_kind != resume_step
+ && maybe_move_out_of_jump_pad (lwp, wstat))
+ {
+ if (debug_threads)
+ debug_printf ("LWP %ld needs stabilizing (in jump pad)\n",
+ lwpid_of (thread));
+
+ if (wstat)
+ {
+ lwp->status_pending_p = 0;
+ enqueue_one_deferred_signal (lwp, wstat);
+
+ if (debug_threads)
+ debug_printf ("Signal %d for LWP %ld deferred "
+ "(in jump pad)\n",
+ WSTOPSIG (*wstat), lwpid_of (thread));
+ }
+
+ linux_resume_one_lwp (lwp, 0, 0, NULL);
+ }
+ else
+ lwp->suspended++;
+}
+
+static int
+lwp_running (struct inferior_list_entry *entry, void *data)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ if (lwp->dead)
+ return 0;
+ if (lwp->stopped)
+ return 0;
+ return 1;
+}
+
+/* Stop all lwps that aren't stopped yet, except EXCEPT, if not NULL.
+ If SUSPEND, then also increase the suspend count of every LWP,
+ except EXCEPT. */
+
+static void
+stop_all_lwps (int suspend, struct lwp_info *except)
+{
+ /* Should not be called recursively. */
+ gdb_assert (stopping_threads == NOT_STOPPING_THREADS);
+
+ if (debug_threads)
+ {
+ debug_enter ();
+ debug_printf ("stop_all_lwps (%s, except=%s)\n",
+ suspend ? "stop-and-suspend" : "stop",
+ except != NULL
+ ? target_pid_to_str (ptid_of (get_lwp_thread (except)))
+ : "none");
+ }
+
+ stopping_threads = (suspend
+ ? STOPPING_AND_SUSPENDING_THREADS
+ : STOPPING_THREADS);
+
+ if (suspend)
+ find_inferior (&all_threads, suspend_and_send_sigstop_callback, except);
+ else
+ find_inferior (&all_threads, send_sigstop_callback, except);
+ wait_for_sigstop ();
+ stopping_threads = NOT_STOPPING_THREADS;
+
+ if (debug_threads)
+ {
+ debug_printf ("stop_all_lwps done, setting stopping_threads "
+ "back to !stopping\n");
+ debug_exit ();
+ }
+}
+
+/* Resume execution of LWP. If STEP is nonzero, single-step it. If
+ SIGNAL is nonzero, give it that signal. */
+
+static void
+linux_resume_one_lwp_throw (struct lwp_info *lwp,
+ int step, int signal, siginfo_t *info)
+{
+ struct thread_info *thread = get_lwp_thread (lwp);
+ struct thread_info *saved_thread;
+ int fast_tp_collecting;
+
+ if (lwp->stopped == 0)
+ return;
+
+ fast_tp_collecting = lwp->collecting_fast_tracepoint;
+
+ gdb_assert (!stabilizing_threads || fast_tp_collecting);
+
+ /* Cancel actions that rely on GDB not changing the PC (e.g., the
+ user used the "jump" command, or "set $pc = foo"). */
+ if (lwp->stop_pc != get_pc (lwp))
+ {
+ /* Collecting 'while-stepping' actions doesn't make sense
+ anymore. */
+ release_while_stepping_state_list (thread);
+ }
+
+ /* If we have pending signals or status, and a new signal, enqueue the
+ signal. Also enqueue the signal if we are waiting to reinsert a
+ breakpoint; it will be picked up again below. */
+ if (signal != 0
+ && (lwp->status_pending_p
+ || lwp->pending_signals != NULL
+ || lwp->bp_reinsert != 0
+ || fast_tp_collecting))
+ {
+ struct pending_signals *p_sig;
+ p_sig = xmalloc (sizeof (*p_sig));
+ p_sig->prev = lwp->pending_signals;
+ p_sig->signal = signal;
+ if (info == NULL)
+ memset (&p_sig->info, 0, sizeof (siginfo_t));
+ else
+ memcpy (&p_sig->info, info, sizeof (siginfo_t));
+ lwp->pending_signals = p_sig;
+ }
+
+ if (lwp->status_pending_p)
+ {
+ if (debug_threads)
+ debug_printf ("Not resuming lwp %ld (%s, signal %d, stop %s);"
+ " has pending status\n",
+ lwpid_of (thread), step ? "step" : "continue", signal,
+ lwp->stop_expected ? "expected" : "not expected");
+ return;
+ }
+
+ saved_thread = current_thread;
+ current_thread = thread;
+
+ if (debug_threads)
+ debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
+ lwpid_of (thread), step ? "step" : "continue", signal,
+ lwp->stop_expected ? "expected" : "not expected");
+
+ /* This bit needs some thinking about. If we get a signal that
+ we must report while a single-step reinsert is still pending,
+ we often end up resuming the thread. It might be better to
+ (ew) allow a stack of pending events; then we could be sure that
+ the reinsert happened right away and not lose any signals.
+
+ Making this stack would also shrink the window in which breakpoints are
+ uninserted (see comment in linux_wait_for_lwp) but not enough for
+ complete correctness, so it won't solve that problem. It may be
+ worthwhile just to solve this one, however. */
+ if (lwp->bp_reinsert != 0)
+ {
+ if (debug_threads)
+ debug_printf (" pending reinsert at 0x%s\n",
+ paddress (lwp->bp_reinsert));
+
+ if (can_hardware_single_step ())
+ {
+ if (fast_tp_collecting == 0)
+ {
+ if (step == 0)
+ fprintf (stderr, "BAD - reinserting but not stepping.\n");
+ if (lwp->suspended)
+ fprintf (stderr, "BAD - reinserting and suspended(%d).\n",
+ lwp->suspended);
+ }
+
+ step = 1;
+ }
+
+ /* Postpone any pending signal. It was enqueued above. */
+ signal = 0;
+ }
+
+ if (fast_tp_collecting == 1)
+ {
+ if (debug_threads)
+ debug_printf ("lwp %ld wants to get out of fast tracepoint jump pad"
+ " (exit-jump-pad-bkpt)\n",
+ lwpid_of (thread));
+
+ /* Postpone any pending signal. It was enqueued above. */
+ signal = 0;
+ }
+ else if (fast_tp_collecting == 2)
+ {
+ if (debug_threads)
+ debug_printf ("lwp %ld wants to get out of fast tracepoint jump pad"
+ " single-stepping\n",
+ lwpid_of (thread));
+
+ if (can_hardware_single_step ())
+ step = 1;
+ else
+ {
+ internal_error (__FILE__, __LINE__,
+ "moving out of jump pad single-stepping"
+ " not implemented on this target");
+ }
+
+ /* Postpone any pending signal. It was enqueued above. */
+ signal = 0;
+ }
+
+ /* If we have while-stepping actions in this thread set it stepping.
+ If we have a signal to deliver, it may or may not be set to
+ SIG_IGN, we don't know. Assume so, and allow collecting
+ while-stepping into a signal handler. A possible smart thing to
+ do would be to set an internal breakpoint at the signal return
+ address, continue, and carry on catching this while-stepping
+ action only when that breakpoint is hit. A future
+ enhancement. */
+ if (thread->while_stepping != NULL
+ && can_hardware_single_step ())
+ {
+ if (debug_threads)
+ debug_printf ("lwp %ld has a while-stepping action -> forcing step.\n",
+ lwpid_of (thread));
+ step = 1;
+ }
+
+ if (the_low_target.get_pc != NULL)
+ {
+ struct regcache *regcache = get_thread_regcache (current_thread, 1);
+
+ lwp->stop_pc = (*the_low_target.get_pc) (regcache);
+
+ if (debug_threads)
+ {
+ debug_printf (" %s from pc 0x%lx\n", step ? "step" : "continue",
+ (long) lwp->stop_pc);
+ }
+ }
+
+ /* If we have pending signals, consume one unless we are trying to
+ reinsert a breakpoint or we're trying to finish a fast tracepoint
+ collect. */
+ if (lwp->pending_signals != NULL
+ && lwp->bp_reinsert == 0
+ && fast_tp_collecting == 0)
+ {
+ struct pending_signals **p_sig;
+
+ p_sig = &lwp->pending_signals;
+ while ((*p_sig)->prev != NULL)
+ p_sig = &(*p_sig)->prev;
+
+ signal = (*p_sig)->signal;
+ if ((*p_sig)->info.si_signo != 0)
+ ptrace (PTRACE_SETSIGINFO, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
+ &(*p_sig)->info);
+
+ free (*p_sig);
+ *p_sig = NULL;
+ }
+
+ if (the_low_target.prepare_to_resume != NULL)
+ the_low_target.prepare_to_resume (lwp);
+
+ regcache_invalidate_thread (thread);
+ errno = 0;
+ lwp->stepping = step;
+ ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (thread),
+ (PTRACE_TYPE_ARG3) 0,
+ /* Coerce to a uintptr_t first to avoid potential gcc warning
+ of coercing an 8 byte integer to a 4 byte pointer. */
+ (PTRACE_TYPE_ARG4) (uintptr_t) signal);
+
+ current_thread = saved_thread;
+ if (errno)
+ perror_with_name ("resuming thread");
+
+ /* Successfully resumed. Clear state that no longer makes sense,
+ and mark the LWP as running. Must not do this before resuming
+ otherwise if that fails other code will be confused. E.g., we'd
+ later try to stop the LWP and hang forever waiting for a stop
+ status. Note that we must not throw after this is cleared,
+ otherwise handle_zombie_lwp_error would get confused. */
+ lwp->stopped = 0;
+ lwp->stop_reason = TARGET_STOPPED_BY_NO_REASON;
+}
+
+/* Called when we try to resume a stopped LWP and that errors out. If
+ the LWP is no longer in ptrace-stopped state (meaning it's zombie,
+ or about to become), discard the error, clear any pending status
+ the LWP may have, and return true (we'll collect the exit status
+ soon enough). Otherwise, return false. */
+
+static int
+check_ptrace_stopped_lwp_gone (struct lwp_info *lp)
+{
+ struct thread_info *thread = get_lwp_thread (lp);
+
+ /* If we get an error after resuming the LWP successfully, we'd
+ confuse !T state for the LWP being gone. */
+ gdb_assert (lp->stopped);
+
+ /* We can't just check whether the LWP is in 'Z (Zombie)' state,
+ because even if ptrace failed with ESRCH, the tracee may be "not
+ yet fully dead", but already refusing ptrace requests. In that
+ case the tracee has 'R (Running)' state for a little bit
+ (observed in Linux 3.18). See also the note on ESRCH in the
+ ptrace(2) man page. Instead, check whether the LWP has any state
+ other than ptrace-stopped. */
+
+ /* Don't assume anything if /proc/PID/status can't be read. */
+ if (linux_proc_pid_is_trace_stopped_nowarn (lwpid_of (thread)) == 0)
+ {
+ lp->stop_reason = TARGET_STOPPED_BY_NO_REASON;
+ lp->status_pending_p = 0;
+ return 1;
+ }
+ return 0;
+}
+
+/* Like linux_resume_one_lwp_throw, but no error is thrown if the LWP
+ disappears while we try to resume it. */
+
+static void
+linux_resume_one_lwp (struct lwp_info *lwp,
+ int step, int signal, siginfo_t *info)
+{
+ TRY
+ {
+ linux_resume_one_lwp_throw (lwp, step, signal, info);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ if (!check_ptrace_stopped_lwp_gone (lwp))
+ throw_exception (ex);
+ }
+ END_CATCH
+}
+
+struct thread_resume_array
+{
+ struct thread_resume *resume;
+ size_t n;
+};
+
+/* This function is called once per thread via find_inferior.
+ ARG is a pointer to a thread_resume_array struct.
+ We look up the thread specified by ENTRY in ARG, and mark the thread
+ with a pointer to the appropriate resume request.
+
+ This algorithm is O(threads * resume elements), but resume elements
+ is small (and will remain small at least until GDB supports thread
+ suspension). */
+
+static int
+linux_set_resume_request (struct inferior_list_entry *entry, void *arg)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ int ndx;
+ struct thread_resume_array *r;
+
+ r = arg;
+
+ for (ndx = 0; ndx < r->n; ndx++)
+ {
+ ptid_t ptid = r->resume[ndx].thread;
+ if (ptid_equal (ptid, minus_one_ptid)
+ || ptid_equal (ptid, entry->id)
+ /* Handle both 'pPID' and 'pPID.-1' as meaning 'all threads
+ of PID'. */
+ || (ptid_get_pid (ptid) == pid_of (thread)
+ && (ptid_is_pid (ptid)
+ || ptid_get_lwp (ptid) == -1)))
+ {
+ if (r->resume[ndx].kind == resume_stop
+ && thread->last_resume_kind == resume_stop)
+ {
+ if (debug_threads)
+ debug_printf ("already %s LWP %ld at GDB's request\n",
+ (thread->last_status.kind
+ == TARGET_WAITKIND_STOPPED)
+ ? "stopped"
+ : "stopping",
+ lwpid_of (thread));
+
+ continue;
+ }
+
+ lwp->resume = &r->resume[ndx];
+ thread->last_resume_kind = lwp->resume->kind;
+
+ lwp->step_range_start = lwp->resume->step_range_start;
+ lwp->step_range_end = lwp->resume->step_range_end;
+
+ /* If we had a deferred signal to report, dequeue one now.
+ This can happen if LWP gets more than one signal while
+ trying to get out of a jump pad. */
+ if (lwp->stopped
+ && !lwp->status_pending_p
+ && dequeue_one_deferred_signal (lwp, &lwp->status_pending))
+ {
+ lwp->status_pending_p = 1;
+
+ if (debug_threads)
+ debug_printf ("Dequeueing deferred signal %d for LWP %ld, "
+ "leaving status pending.\n",
+ WSTOPSIG (lwp->status_pending),
+ lwpid_of (thread));
+ }
+
+ return 0;
+ }
+ }
+
+ /* No resume action for this thread. */
+ lwp->resume = NULL;
+
+ return 0;
+}
+
+/* find_inferior callback for linux_resume.
+ Set *FLAG_P if this lwp has an interesting status pending. */
+
+static int
+resume_status_pending_p (struct inferior_list_entry *entry, void *flag_p)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ /* LWPs which will not be resumed are not interesting, because
+ we might not wait for them next time through linux_wait. */
+ if (lwp->resume == NULL)
+ return 0;
+
+ if (thread_still_has_status_pending_p (thread))
+ * (int *) flag_p = 1;
+
+ return 0;
+}
+
+/* Return 1 if this lwp that GDB wants running is stopped at an
+ internal breakpoint that we need to step over. It assumes that any
+ required STOP_PC adjustment has already been propagated to the
+ inferior's regcache. */
+
+static int
+need_step_over_p (struct inferior_list_entry *entry, void *dummy)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ struct thread_info *saved_thread;
+ CORE_ADDR pc;
+
+ /* LWPs which will not be resumed are not interesting, because we
+ might not wait for them next time through linux_wait. */
+
+ if (!lwp->stopped)
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? Ignoring, not stopped\n",
+ lwpid_of (thread));
+ return 0;
+ }
+
+ if (thread->last_resume_kind == resume_stop)
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? Ignoring, should remain"
+ " stopped\n",
+ lwpid_of (thread));
+ return 0;
+ }
+
+ gdb_assert (lwp->suspended >= 0);
+
+ if (lwp->suspended)
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? Ignoring, suspended\n",
+ lwpid_of (thread));
+ return 0;
+ }
+
+ if (!lwp->need_step_over)
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? No\n", lwpid_of (thread));
+ }
+
+ if (lwp->status_pending_p)
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? Ignoring, has pending"
+ " status.\n",
+ lwpid_of (thread));
+ return 0;
+ }
+
+ /* Note: PC, not STOP_PC. Either GDB has adjusted the PC already,
+ or we have. */
+ pc = get_pc (lwp);
+
+ /* If the PC has changed since we stopped, then don't do anything,
+ and let the breakpoint/tracepoint be hit. This happens if, for
+ instance, GDB handled the decr_pc_after_break subtraction itself,
+ GDB is OOL stepping this thread, or the user has issued a "jump"
+ command, or poked thread's registers herself. */
+ if (pc != lwp->stop_pc)
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? Cancelling, PC was changed. "
+ "Old stop_pc was 0x%s, PC is now 0x%s\n",
+ lwpid_of (thread),
+ paddress (lwp->stop_pc), paddress (pc));
+
+ lwp->need_step_over = 0;
+ return 0;
+ }
+
+ saved_thread = current_thread;
+ current_thread = thread;
+
+ /* We can only step over breakpoints we know about. */
+ if (breakpoint_here (pc) || fast_tracepoint_jump_here (pc))
+ {
+ /* Don't step over a breakpoint that GDB expects to hit
+ though. If the condition is being evaluated on the target's side
+ and it evaluate to false, step over this breakpoint as well. */
+ if (gdb_breakpoint_here (pc)
+ && gdb_condition_true_at_breakpoint (pc)
+ && gdb_no_commands_at_breakpoint (pc))
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? yes, but found"
+ " GDB breakpoint at 0x%s; skipping step over\n",
+ lwpid_of (thread), paddress (pc));
+
+ current_thread = saved_thread;
+ return 0;
+ }
+ else
+ {
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? yes, "
+ "found breakpoint at 0x%s\n",
+ lwpid_of (thread), paddress (pc));
+
+ /* We've found an lwp that needs stepping over --- return 1 so
+ that find_inferior stops looking. */
+ current_thread = saved_thread;
+
+ /* If the step over is cancelled, this is set again. */
+ lwp->need_step_over = 0;
+ return 1;
+ }
+ }
+
+ current_thread = saved_thread;
+
+ if (debug_threads)
+ debug_printf ("Need step over [LWP %ld]? No, no breakpoint found"
+ " at 0x%s\n",
+ lwpid_of (thread), paddress (pc));
+
+ return 0;
+}
+
+/* Start a step-over operation on LWP. When LWP stopped at a
+ breakpoint, to make progress, we need to remove the breakpoint out
+ of the way. If we let other threads run while we do that, they may
+ pass by the breakpoint location and miss hitting it. To avoid
+ that, a step-over momentarily stops all threads while LWP is
+ single-stepped while the breakpoint is temporarily uninserted from
+ the inferior. When the single-step finishes, we reinsert the
+ breakpoint, and let all threads that are supposed to be running,
+ run again.
+
+ On targets that don't support hardware single-step, we don't
+ currently support full software single-stepping. Instead, we only
+ support stepping over the thread event breakpoint, by asking the
+ low target where to place a reinsert breakpoint. Since this
+ routine assumes the breakpoint being stepped over is a thread event
+ breakpoint, it usually assumes the return address of the current
+ function is a good enough place to set the reinsert breakpoint. */
+
+static int
+start_step_over (struct lwp_info *lwp)
+{
+ struct thread_info *thread = get_lwp_thread (lwp);
+ struct thread_info *saved_thread;
+ CORE_ADDR pc;
+ int step;
+
+ if (debug_threads)
+ debug_printf ("Starting step-over on LWP %ld. Stopping all threads\n",
+ lwpid_of (thread));
+
+ stop_all_lwps (1, lwp);
+ gdb_assert (lwp->suspended == 0);
+
+ if (debug_threads)
+ debug_printf ("Done stopping all threads for step-over.\n");
+
+ /* Note, we should always reach here with an already adjusted PC,
+ either by GDB (if we're resuming due to GDB's request), or by our
+ caller, if we just finished handling an internal breakpoint GDB
+ shouldn't care about. */
+ pc = get_pc (lwp);
+
+ saved_thread = current_thread;
+ current_thread = thread;
+
+ lwp->bp_reinsert = pc;
+ uninsert_breakpoints_at (pc);
+ uninsert_fast_tracepoint_jumps_at (pc);
+
+ if (can_hardware_single_step ())
+ {
+ step = 1;
+ }
+ else
+ {
+ CORE_ADDR raddr = (*the_low_target.breakpoint_reinsert_addr) ();
+ set_reinsert_breakpoint (raddr);
+ step = 0;
+ }
+
+ current_thread = saved_thread;
+
+ linux_resume_one_lwp (lwp, step, 0, NULL);
+
+ /* Require next event from this LWP. */
+ step_over_bkpt = thread->entry.id;
+ return 1;
+}
+
+/* Finish a step-over. Reinsert the breakpoint we had uninserted in
+ start_step_over, if still there, and delete any reinsert
+ breakpoints we've set, on non hardware single-step targets. */
+
+static int
+finish_step_over (struct lwp_info *lwp)
+{
+ if (lwp->bp_reinsert != 0)
+ {
+ if (debug_threads)
+ debug_printf ("Finished step over.\n");
+
+ /* Reinsert any breakpoint at LWP->BP_REINSERT. Note that there
+ may be no breakpoint to reinsert there by now. */
+ reinsert_breakpoints_at (lwp->bp_reinsert);
+ reinsert_fast_tracepoint_jumps_at (lwp->bp_reinsert);
+
+ lwp->bp_reinsert = 0;
+
+ /* Delete any software-single-step reinsert breakpoints. No
+ longer needed. We don't have to worry about other threads
+ hitting this trap, and later not being able to explain it,
+ because we were stepping over a breakpoint, and we hold all
+ threads but LWP stopped while doing that. */
+ if (!can_hardware_single_step ())
+ delete_reinsert_breakpoints ();
+
+ step_over_bkpt = null_ptid;
+ return 1;
+ }
+ else
+ return 0;
+}
+
+/* This function is called once per thread. We check the thread's resume
+ request, which will tell us whether to resume, step, or leave the thread
+ stopped; and what signal, if any, it should be sent.
+
+ For threads which we aren't explicitly told otherwise, we preserve
+ the stepping flag; this is used for stepping over gdbserver-placed
+ breakpoints.
+
+ If pending_flags was set in any thread, we queue any needed
+ signals, since we won't actually resume. We already have a pending
+ event to report, so we don't need to preserve any step requests;
+ they should be re-issued if necessary. */
+
+static int
+linux_resume_one_thread (struct inferior_list_entry *entry, void *arg)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ int step;
+ int leave_all_stopped = * (int *) arg;
+ int leave_pending;
+
+ if (lwp->resume == NULL)
+ return 0;
+
+ if (lwp->resume->kind == resume_stop)
+ {
+ if (debug_threads)
+ debug_printf ("resume_stop request for LWP %ld\n", lwpid_of (thread));
+
+ if (!lwp->stopped)
+ {
+ if (debug_threads)
+ debug_printf ("stopping LWP %ld\n", lwpid_of (thread));
+
+ /* Stop the thread, and wait for the event asynchronously,
+ through the event loop. */
+ send_sigstop (lwp);
+ }
+ else
+ {
+ if (debug_threads)
+ debug_printf ("already stopped LWP %ld\n",
+ lwpid_of (thread));
+
+ /* The LWP may have been stopped in an internal event that
+ was not meant to be notified back to GDB (e.g., gdbserver
+ breakpoint), so we should be reporting a stop event in
+ this case too. */
+
+ /* If the thread already has a pending SIGSTOP, this is a
+ no-op. Otherwise, something later will presumably resume
+ the thread and this will cause it to cancel any pending
+ operation, due to last_resume_kind == resume_stop. If
+ the thread already has a pending status to report, we
+ will still report it the next time we wait - see
+ status_pending_p_callback. */
+
+ /* If we already have a pending signal to report, then
+ there's no need to queue a SIGSTOP, as this means we're
+ midway through moving the LWP out of the jumppad, and we
+ will report the pending signal as soon as that is
+ finished. */
+ if (lwp->pending_signals_to_report == NULL)
+ send_sigstop (lwp);
+ }
+
+ /* For stop requests, we're done. */
+ lwp->resume = NULL;
+ thread->last_status.kind = TARGET_WAITKIND_IGNORE;
+ return 0;
+ }
+
+ /* If this thread which is about to be resumed has a pending status,
+ then don't resume any threads - we can just report the pending
+ status. Make sure to queue any signals that would otherwise be
+ sent. In all-stop mode, we do this decision based on if *any*
+ thread has a pending status. If there's a thread that needs the
+ step-over-breakpoint dance, then don't resume any other thread
+ but that particular one. */
+ leave_pending = (lwp->status_pending_p || leave_all_stopped);
+
+ if (!leave_pending)
+ {
+ if (debug_threads)
+ debug_printf ("resuming LWP %ld\n", lwpid_of (thread));
+
+ step = (lwp->resume->kind == resume_step);
+ linux_resume_one_lwp (lwp, step, lwp->resume->sig, NULL);
+ }
+ else
+ {
+ if (debug_threads)
+ debug_printf ("leaving LWP %ld stopped\n", lwpid_of (thread));
+
+ /* If we have a new signal, enqueue the signal. */
+ if (lwp->resume->sig != 0)
+ {
+ struct pending_signals *p_sig;
+ p_sig = xmalloc (sizeof (*p_sig));
+ p_sig->prev = lwp->pending_signals;
+ p_sig->signal = lwp->resume->sig;
+ memset (&p_sig->info, 0, sizeof (siginfo_t));
+
+ /* If this is the same signal we were previously stopped by,
+ make sure to queue its siginfo. We can ignore the return
+ value of ptrace; if it fails, we'll skip
+ PTRACE_SETSIGINFO. */
+ if (WIFSTOPPED (lwp->last_status)
+ && WSTOPSIG (lwp->last_status) == lwp->resume->sig)
+ ptrace (PTRACE_GETSIGINFO, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0,
+ &p_sig->info);
+
+ lwp->pending_signals = p_sig;
+ }
+ }
+
+ thread->last_status.kind = TARGET_WAITKIND_IGNORE;
+ lwp->resume = NULL;
+ return 0;
+}
+
+static void
+linux_resume (struct thread_resume *resume_info, size_t n)
+{
+ struct thread_resume_array array = { resume_info, n };
+ struct thread_info *need_step_over = NULL;
+ int any_pending;
+ int leave_all_stopped;
+
+ if (debug_threads)
+ {
+ debug_enter ();
+ debug_printf ("linux_resume:\n");
+ }
+
+ find_inferior (&all_threads, linux_set_resume_request, &array);
+
+ /* If there is a thread which would otherwise be resumed, which has
+ a pending status, then don't resume any threads - we can just
+ report the pending status. Make sure to queue any signals that
+ would otherwise be sent. In non-stop mode, we'll apply this
+ logic to each thread individually. We consume all pending events
+ before considering to start a step-over (in all-stop). */
+ any_pending = 0;
+ if (!non_stop)
+ find_inferior (&all_threads, resume_status_pending_p, &any_pending);
+
+ /* If there is a thread which would otherwise be resumed, which is
+ stopped at a breakpoint that needs stepping over, then don't
+ resume any threads - have it step over the breakpoint with all
+ other threads stopped, then resume all threads again. Make sure
+ to queue any signals that would otherwise be delivered or
+ queued. */
+ if (!any_pending && supports_breakpoints ())
+ need_step_over
+ = (struct thread_info *) find_inferior (&all_threads,
+ need_step_over_p, NULL);
+
+ leave_all_stopped = (need_step_over != NULL || any_pending);
+
+ if (debug_threads)
+ {
+ if (need_step_over != NULL)
+ debug_printf ("Not resuming all, need step over\n");
+ else if (any_pending)
+ debug_printf ("Not resuming, all-stop and found "
+ "an LWP with pending status\n");
+ else
+ debug_printf ("Resuming, no pending status or step over needed\n");
+ }
+
+ /* Even if we're leaving threads stopped, queue all signals we'd
+ otherwise deliver. */
+ find_inferior (&all_threads, linux_resume_one_thread, &leave_all_stopped);
+
+ if (need_step_over)
+ start_step_over (get_thread_lwp (need_step_over));
+
+ if (debug_threads)
+ {
+ debug_printf ("linux_resume done\n");
+ debug_exit ();
+ }
+}
+
+/* This function is called once per thread. We check the thread's
+ last resume request, which will tell us whether to resume, step, or
+ leave the thread stopped. Any signal the client requested to be
+ delivered has already been enqueued at this point.
+
+ If any thread that GDB wants running is stopped at an internal
+ breakpoint that needs stepping over, we start a step-over operation
+ on that particular thread, and leave all others stopped. */
+
+static int
+proceed_one_lwp (struct inferior_list_entry *entry, void *except)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+ int step;
+
+ if (lwp == except)
+ return 0;
+
+ if (debug_threads)
+ debug_printf ("proceed_one_lwp: lwp %ld\n", lwpid_of (thread));
+
+ if (!lwp->stopped)
+ {
+ if (debug_threads)
+ debug_printf (" LWP %ld already running\n", lwpid_of (thread));
+ return 0;
+ }
+
+ if (thread->last_resume_kind == resume_stop
+ && thread->last_status.kind != TARGET_WAITKIND_IGNORE)
+ {
+ if (debug_threads)
+ debug_printf (" client wants LWP to remain %ld stopped\n",
+ lwpid_of (thread));
+ return 0;
+ }
+
+ if (lwp->status_pending_p)
+ {
+ if (debug_threads)
+ debug_printf (" LWP %ld has pending status, leaving stopped\n",
+ lwpid_of (thread));
+ return 0;
+ }
+
+ gdb_assert (lwp->suspended >= 0);
+
+ if (lwp->suspended)
+ {
+ if (debug_threads)
+ debug_printf (" LWP %ld is suspended\n", lwpid_of (thread));
+ return 0;
+ }
+
+ if (thread->last_resume_kind == resume_stop
+ && lwp->pending_signals_to_report == NULL
+ && lwp->collecting_fast_tracepoint == 0)
+ {
+ /* We haven't reported this LWP as stopped yet (otherwise, the
+ last_status.kind check above would catch it, and we wouldn't
+ reach here. This LWP may have been momentarily paused by a
+ stop_all_lwps call while handling for example, another LWP's
+ step-over. In that case, the pending expected SIGSTOP signal
+ that was queued at vCont;t handling time will have already
+ been consumed by wait_for_sigstop, and so we need to requeue
+ another one here. Note that if the LWP already has a SIGSTOP
+ pending, this is a no-op. */
+
+ if (debug_threads)
+ debug_printf ("Client wants LWP %ld to stop. "
+ "Making sure it has a SIGSTOP pending\n",
+ lwpid_of (thread));
+
+ send_sigstop (lwp);
+ }
+
+ step = thread->last_resume_kind == resume_step;
+ linux_resume_one_lwp (lwp, step, 0, NULL);
+ return 0;
+}
+
+static int
+unsuspend_and_proceed_one_lwp (struct inferior_list_entry *entry, void *except)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ if (lwp == except)
+ return 0;
+
+ lwp->suspended--;
+ gdb_assert (lwp->suspended >= 0);
+
+ return proceed_one_lwp (entry, except);
+}
+
+/* When we finish a step-over, set threads running again. If there's
+ another thread that may need a step-over, now's the time to start
+ it. Eventually, we'll move all threads past their breakpoints. */
+
+static void
+proceed_all_lwps (void)
+{
+ struct thread_info *need_step_over;
+
+ /* If there is a thread which would otherwise be resumed, which is
+ stopped at a breakpoint that needs stepping over, then don't
+ resume any threads - have it step over the breakpoint with all
+ other threads stopped, then resume all threads again. */
+
+ if (supports_breakpoints ())
+ {
+ need_step_over
+ = (struct thread_info *) find_inferior (&all_threads,
+ need_step_over_p, NULL);
+
+ if (need_step_over != NULL)
+ {
+ if (debug_threads)
+ debug_printf ("proceed_all_lwps: found "
+ "thread %ld needing a step-over\n",
+ lwpid_of (need_step_over));
+
+ start_step_over (get_thread_lwp (need_step_over));
+ return;
+ }
+ }
+
+ if (debug_threads)
+ debug_printf ("Proceeding, no step-over needed\n");
+
+ find_inferior (&all_threads, proceed_one_lwp, NULL);
+}
+
+/* Stopped LWPs that the client wanted to be running, that don't have
+ pending statuses, are set to run again, except for EXCEPT, if not
+ NULL. This undoes a stop_all_lwps call. */
+
+static void
+unstop_all_lwps (int unsuspend, struct lwp_info *except)
+{
+ if (debug_threads)
+ {
+ debug_enter ();
+ if (except)
+ debug_printf ("unstopping all lwps, except=(LWP %ld)\n",
+ lwpid_of (get_lwp_thread (except)));
+ else
+ debug_printf ("unstopping all lwps\n");
+ }
+
+ if (unsuspend)
+ find_inferior (&all_threads, unsuspend_and_proceed_one_lwp, except);
+ else
+ find_inferior (&all_threads, proceed_one_lwp, except);
+
+ if (debug_threads)
+ {
+ debug_printf ("unstop_all_lwps done\n");
+ debug_exit ();
+ }
+}
+
+
+#ifdef HAVE_LINUX_REGSETS
+
+#define use_linux_regsets 1
+
+/* Returns true if REGSET has been disabled. */
+
+static int
+regset_disabled (struct regsets_info *info, struct regset_info *regset)
+{
+ return (info->disabled_regsets != NULL
+ && info->disabled_regsets[regset - info->regsets]);
+}
+
+/* Disable REGSET. */
+
+static void
+disable_regset (struct regsets_info *info, struct regset_info *regset)
+{
+ int dr_offset;
+
+ dr_offset = regset - info->regsets;
+ if (info->disabled_regsets == NULL)
+ info->disabled_regsets = xcalloc (1, info->num_regsets);
+ info->disabled_regsets[dr_offset] = 1;
+}
+
+static int
+regsets_fetch_inferior_registers (struct regsets_info *regsets_info,
+ struct regcache *regcache)
+{
+ struct regset_info *regset;
+ int saw_general_regs = 0;
+ int pid;
+ struct iovec iov;
+
+ pid = lwpid_of (current_thread);
+ for (regset = regsets_info->regsets; regset->size >= 0; regset++)
+ {
+ void *buf, *data;
+ int nt_type, res;
+
+ if (regset->size == 0 || regset_disabled (regsets_info, regset))
+ continue;
+
+ buf = xmalloc (regset->size);
+
+ nt_type = regset->nt_type;
+ if (nt_type)
+ {
+ iov.iov_base = buf;
+ iov.iov_len = regset->size;
+ data = (void *) &iov;
+ }
+ else
+ data = buf;
+
+#ifndef __sparc__
+ res = ptrace (regset->get_request, pid,
+ (PTRACE_TYPE_ARG3) (long) nt_type, data);
+#else
+ res = ptrace (regset->get_request, pid, data, nt_type);
+#endif
+ if (res < 0)
+ {
+ if (errno == EIO)
+ {
+ /* If we get EIO on a regset, do not try it again for
+ this process mode. */
+ disable_regset (regsets_info, regset);
+ }
+ else if (errno == ENODATA)
+ {
+ /* ENODATA may be returned if the regset is currently
+ not "active". This can happen in normal operation,
+ so suppress the warning in this case. */
+ }
+ else
+ {
+ char s[256];
+ sprintf (s, "ptrace(regsets_fetch_inferior_registers) PID=%d",
+ pid);
+ perror (s);
+ }
+ }
+ else
+ {
+ if (regset->type == GENERAL_REGS)
+ saw_general_regs = 1;
+ regset->store_function (regcache, buf);
+ }
+ free (buf);
+ }
+ if (saw_general_regs)
+ return 0;
+ else
+ return 1;
+}
+
+static int
+regsets_store_inferior_registers (struct regsets_info *regsets_info,
+ struct regcache *regcache)
+{
+ struct regset_info *regset;
+ int saw_general_regs = 0;
+ int pid;
+ struct iovec iov;
+
+ pid = lwpid_of (current_thread);
+ for (regset = regsets_info->regsets; regset->size >= 0; regset++)
+ {
+ void *buf, *data;
+ int nt_type, res;
+
+ if (regset->size == 0 || regset_disabled (regsets_info, regset)
+ || regset->fill_function == NULL)
+ continue;
+
+ buf = xmalloc (regset->size);
+
+ /* First fill the buffer with the current register set contents,
+ in case there are any items in the kernel's regset that are
+ not in gdbserver's regcache. */
+
+ nt_type = regset->nt_type;
+ if (nt_type)
+ {
+ iov.iov_base = buf;
+ iov.iov_len = regset->size;
+ data = (void *) &iov;
+ }
+ else
+ data = buf;
+
+#ifndef __sparc__
+ res = ptrace (regset->get_request, pid,
+ (PTRACE_TYPE_ARG3) (long) nt_type, data);
+#else
+ res = ptrace (regset->get_request, pid, data, nt_type);
+#endif
+
+ if (res == 0)
+ {
+ /* Then overlay our cached registers on that. */
+ regset->fill_function (regcache, buf);
+
+ /* Only now do we write the register set. */
+#ifndef __sparc__
+ res = ptrace (regset->set_request, pid,
+ (PTRACE_TYPE_ARG3) (long) nt_type, data);
+#else
+ res = ptrace (regset->set_request, pid, data, nt_type);
+#endif
+ }
+
+ if (res < 0)
+ {
+ if (errno == EIO)
+ {
+ /* If we get EIO on a regset, do not try it again for
+ this process mode. */
+ disable_regset (regsets_info, regset);
+ }
+ else if (errno == ESRCH)
+ {
+ /* At this point, ESRCH should mean the process is
+ already gone, in which case we simply ignore attempts
+ to change its registers. See also the related
+ comment in linux_resume_one_lwp. */
+ free (buf);
+ return 0;
+ }
+ else
+ {
+ perror ("Warning: ptrace(regsets_store_inferior_registers)");
+ }
+ }
+ else if (regset->type == GENERAL_REGS)
+ saw_general_regs = 1;
+ free (buf);
+ }
+ if (saw_general_regs)
+ return 0;
+ else
+ return 1;
+}
+
+#else /* !HAVE_LINUX_REGSETS */
+
+#define use_linux_regsets 0
+#define regsets_fetch_inferior_registers(regsets_info, regcache) 1
+#define regsets_store_inferior_registers(regsets_info, regcache) 1
+
+#endif
+
+/* Return 1 if register REGNO is supported by one of the regset ptrace
+ calls or 0 if it has to be transferred individually. */
+
+static int
+linux_register_in_regsets (const struct regs_info *regs_info, int regno)
+{
+ unsigned char mask = 1 << (regno % 8);
+ size_t index = regno / 8;
+
+ return (use_linux_regsets
+ && (regs_info->regset_bitmap == NULL
+ || (regs_info->regset_bitmap[index] & mask) != 0));
+}
+
+#ifdef HAVE_LINUX_USRREGS
+
+int
+register_addr (const struct usrregs_info *usrregs, int regnum)
+{
+ int addr;
+
+ if (regnum < 0 || regnum >= usrregs->num_regs)
+ error ("Invalid register number %d.", regnum);
+
+ addr = usrregs->regmap[regnum];
+
+ return addr;
+}
+
+/* Fetch one register. */
+static void
+fetch_register (const struct usrregs_info *usrregs,
+ struct regcache *regcache, int regno)
+{
+ CORE_ADDR regaddr;
+ int i, size;
+ char *buf;
+ int pid;
+
+ if (regno >= usrregs->num_regs)
+ return;
+ if ((*the_low_target.cannot_fetch_register) (regno))
+ return;
+
+ regaddr = register_addr (usrregs, regno);
+ if (regaddr == -1)
+ return;
+
+ size = ((register_size (regcache->tdesc, regno)
+ + sizeof (PTRACE_XFER_TYPE) - 1)
+ & -sizeof (PTRACE_XFER_TYPE));
+ buf = alloca (size);
+
+ pid = lwpid_of (current_thread);
+ for (i = 0; i < size; i += sizeof (PTRACE_XFER_TYPE))
+ {
+ errno = 0;
+ *(PTRACE_XFER_TYPE *) (buf + i) =
+ ptrace (PTRACE_PEEKUSER, pid,
+ /* Coerce to a uintptr_t first to avoid potential gcc warning
+ of coercing an 8 byte integer to a 4 byte pointer. */
+ (PTRACE_TYPE_ARG3) (uintptr_t) regaddr, (PTRACE_TYPE_ARG4) 0);
+ regaddr += sizeof (PTRACE_XFER_TYPE);
+ if (errno != 0)
+ error ("reading register %d: %s", regno, strerror (errno));
+ }
+
+ if (the_low_target.supply_ptrace_register)
+ the_low_target.supply_ptrace_register (regcache, regno, buf);
+ else
+ supply_register (regcache, regno, buf);
+}
+
+/* Store one register. */
+static void
+store_register (const struct usrregs_info *usrregs,
+ struct regcache *regcache, int regno)
+{
+ CORE_ADDR regaddr;
+ int i, size;
+ char *buf;
+ int pid;
+
+ if (regno >= usrregs->num_regs)
+ return;
+ if ((*the_low_target.cannot_store_register) (regno))
+ return;
+
+ regaddr = register_addr (usrregs, regno);
+ if (regaddr == -1)
+ return;
+
+ size = ((register_size (regcache->tdesc, regno)
+ + sizeof (PTRACE_XFER_TYPE) - 1)
+ & -sizeof (PTRACE_XFER_TYPE));
+ buf = alloca (size);
+ memset (buf, 0, size);
+
+ if (the_low_target.collect_ptrace_register)
+ the_low_target.collect_ptrace_register (regcache, regno, buf);
+ else
+ collect_register (regcache, regno, buf);
+
+ pid = lwpid_of (current_thread);
+ for (i = 0; i < size; i += sizeof (PTRACE_XFER_TYPE))
+ {
+ errno = 0;
+ ptrace (PTRACE_POKEUSER, pid,
+ /* Coerce to a uintptr_t first to avoid potential gcc warning
+ about coercing an 8 byte integer to a 4 byte pointer. */
+ (PTRACE_TYPE_ARG3) (uintptr_t) regaddr,
+ (PTRACE_TYPE_ARG4) *(PTRACE_XFER_TYPE *) (buf + i));
+ if (errno != 0)
+ {
+ /* At this point, ESRCH should mean the process is
+ already gone, in which case we simply ignore attempts
+ to change its registers. See also the related
+ comment in linux_resume_one_lwp. */
+ if (errno == ESRCH)
+ return;
+
+ if ((*the_low_target.cannot_store_register) (regno) == 0)
+ error ("writing register %d: %s", regno, strerror (errno));
+ }
+ regaddr += sizeof (PTRACE_XFER_TYPE);
+ }
+}
+
+/* Fetch all registers, or just one, from the child process.
+ If REGNO is -1, do this for all registers, skipping any that are
+ assumed to have been retrieved by regsets_fetch_inferior_registers,
+ unless ALL is non-zero.
+ Otherwise, REGNO specifies which register (so we can save time). */
+static void
+usr_fetch_inferior_registers (const struct regs_info *regs_info,
+ struct regcache *regcache, int regno, int all)
+{
+ struct usrregs_info *usr = regs_info->usrregs;
+
+ if (regno == -1)
+ {
+ for (regno = 0; regno < usr->num_regs; regno++)
+ if (all || !linux_register_in_regsets (regs_info, regno))
+ fetch_register (usr, regcache, regno);
+ }
+ else
+ fetch_register (usr, regcache, regno);
+}
+
+/* Store our register values back into the inferior.
+ If REGNO is -1, do this for all registers, skipping any that are
+ assumed to have been saved by regsets_store_inferior_registers,
+ unless ALL is non-zero.
+ Otherwise, REGNO specifies which register (so we can save time). */
+static void
+usr_store_inferior_registers (const struct regs_info *regs_info,
+ struct regcache *regcache, int regno, int all)
+{
+ struct usrregs_info *usr = regs_info->usrregs;
+
+ if (regno == -1)
+ {
+ for (regno = 0; regno < usr->num_regs; regno++)
+ if (all || !linux_register_in_regsets (regs_info, regno))
+ store_register (usr, regcache, regno);
+ }
+ else
+ store_register (usr, regcache, regno);
+}
+
+#else /* !HAVE_LINUX_USRREGS */
+
+#define usr_fetch_inferior_registers(regs_info, regcache, regno, all) do {} while (0)
+#define usr_store_inferior_registers(regs_info, regcache, regno, all) do {} while (0)
+
+#endif
+
+
+void
+linux_fetch_registers (struct regcache *regcache, int regno)
+{
+ int use_regsets;
+ int all = 0;
+ const struct regs_info *regs_info = (*the_low_target.regs_info) ();
+
+ if (regno == -1)
+ {
+ if (the_low_target.fetch_register != NULL
+ && regs_info->usrregs != NULL)
+ for (regno = 0; regno < regs_info->usrregs->num_regs; regno++)
+ (*the_low_target.fetch_register) (regcache, regno);
+
+ all = regsets_fetch_inferior_registers (regs_info->regsets_info, regcache);
+ if (regs_info->usrregs != NULL)
+ usr_fetch_inferior_registers (regs_info, regcache, -1, all);
+ }
+ else
+ {
+ if (the_low_target.fetch_register != NULL
+ && (*the_low_target.fetch_register) (regcache, regno))
+ return;
+
+ use_regsets = linux_register_in_regsets (regs_info, regno);
+ if (use_regsets)
+ all = regsets_fetch_inferior_registers (regs_info->regsets_info,
+ regcache);
+ if ((!use_regsets || all) && regs_info->usrregs != NULL)
+ usr_fetch_inferior_registers (regs_info, regcache, regno, 1);
+ }
+}
+
+void
+linux_store_registers (struct regcache *regcache, int regno)
+{
+ int use_regsets;
+ int all = 0;
+ const struct regs_info *regs_info = (*the_low_target.regs_info) ();
+
+ if (regno == -1)
+ {
+ all = regsets_store_inferior_registers (regs_info->regsets_info,
+ regcache);
+ if (regs_info->usrregs != NULL)
+ usr_store_inferior_registers (regs_info, regcache, regno, all);
+ }
+ else
+ {
+ use_regsets = linux_register_in_regsets (regs_info, regno);
+ if (use_regsets)
+ all = regsets_store_inferior_registers (regs_info->regsets_info,
+ regcache);
+ if ((!use_regsets || all) && regs_info->usrregs != NULL)
+ usr_store_inferior_registers (regs_info, regcache, regno, 1);
+ }
+}
+
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+ to debugger memory starting at MYADDR. */
+
+static int
+linux_read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
+{
+ int pid = lwpid_of (current_thread);
+ register PTRACE_XFER_TYPE *buffer;
+ register CORE_ADDR addr;
+ register int count;
+ char filename[64];
+ register int i;
+ int ret;
+ int fd;
+
+ /* Try using /proc. Don't bother for one word. */
+ if (len >= 3 * sizeof (long))
+ {
+ int bytes;
+
+ /* We could keep this file open and cache it - possibly one per
+ thread. That requires some juggling, but is even faster. */
+ sprintf (filename, "/proc/%d/mem", pid);
+ fd = open (filename, O_RDONLY | O_LARGEFILE);
+ if (fd == -1)
+ goto no_proc;
+
+ /* If pread64 is available, use it. It's faster if the kernel
+ supports it (only one syscall), and it's 64-bit safe even on
+ 32-bit platforms (for instance, SPARC debugging a SPARC64
+ application). */
+#ifdef HAVE_PREAD64
+ bytes = pread64 (fd, myaddr, len, memaddr);
+#else
+ bytes = -1;
+ if (lseek (fd, memaddr, SEEK_SET) != -1)
+ bytes = read (fd, myaddr, len);
+#endif
+
+ close (fd);
+ if (bytes == len)
+ return 0;
+
+ /* Some data was read, we'll try to get the rest with ptrace. */
+ if (bytes > 0)
+ {
+ memaddr += bytes;
+ myaddr += bytes;
+ len -= bytes;
+ }
+ }
+
+ no_proc:
+ /* Round starting address down to longword boundary. */
+ addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_XFER_TYPE);
+ /* Round ending address up; get number of longwords that makes. */
+ count = ((((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
+ / sizeof (PTRACE_XFER_TYPE));
+ /* Allocate buffer of that many longwords. */
+ buffer = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
+
+ /* Read all the longwords */
+ errno = 0;
+ for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+ {
+ /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
+ about coercing an 8 byte integer to a 4 byte pointer. */
+ buffer[i] = ptrace (PTRACE_PEEKTEXT, pid,
+ (PTRACE_TYPE_ARG3) (uintptr_t) addr,
+ (PTRACE_TYPE_ARG4) 0);
+ if (errno)
+ break;
+ }
+ ret = errno;
+
+ /* Copy appropriate bytes out of the buffer. */
+ if (i > 0)
+ {
+ i *= sizeof (PTRACE_XFER_TYPE);
+ i -= memaddr & (sizeof (PTRACE_XFER_TYPE) - 1);
+ memcpy (myaddr,
+ (char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
+ i < len ? i : len);
+ }
+
+ return ret;
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
+ memory at MEMADDR. On failure (cannot write to the inferior)
+ returns the value of errno. Always succeeds if LEN is zero. */
+
+static int
+linux_write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len)
+{
+ register int i;
/* Round starting address down to longword boundary. */
register CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_XFER_TYPE);
/* Round ending address up; get number of longwords that makes. */
register int count
- = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1) / sizeof (PTRACE_XFER_TYPE);
+ = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
+ / sizeof (PTRACE_XFER_TYPE);
+
/* Allocate buffer of that many longwords. */
- register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
- int pid = lwpid_of (get_thread_lwp (current_inferior));
+ register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *)
+ alloca (count * sizeof (PTRACE_XFER_TYPE));
+
+ int pid = lwpid_of (current_thread);
+
+ if (len == 0)
+ {
+ /* Zero length write always succeeds. */
+ return 0;
+ }
+
+ if (debug_threads)
+ {
+ /* Dump up to four bytes. */
+ unsigned int val = * (unsigned int *) myaddr;
+ if (len == 1)
+ val = val & 0xff;
+ else if (len == 2)
+ val = val & 0xffff;
+ else if (len == 3)
+ val = val & 0xffffff;
+ debug_printf ("Writing %0*x to 0x%08lx in process %d\n",
+ 2 * ((len < 4) ? len : 4), val, (long)memaddr, pid);
+ }
+
+ /* Fill start and end extra bytes of buffer with existing memory data. */
+
+ errno = 0;
+ /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
+ about coercing an 8 byte integer to a 4 byte pointer. */
+ buffer[0] = ptrace (PTRACE_PEEKTEXT, pid,
+ (PTRACE_TYPE_ARG3) (uintptr_t) addr,
+ (PTRACE_TYPE_ARG4) 0);
+ if (errno)
+ return errno;
+
+ if (count > 1)
+ {
+ errno = 0;
+ buffer[count - 1]
+ = ptrace (PTRACE_PEEKTEXT, pid,
+ /* Coerce to a uintptr_t first to avoid potential gcc warning
+ about coercing an 8 byte integer to a 4 byte pointer. */
+ (PTRACE_TYPE_ARG3) (uintptr_t) (addr + (count - 1)
+ * sizeof (PTRACE_XFER_TYPE)),
+ (PTRACE_TYPE_ARG4) 0);
+ if (errno)
+ return errno;
+ }
+
+ /* Copy data to be written over corresponding part of buffer. */
+
+ memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
+ myaddr, len);
+
+ /* Write the entire buffer. */
+
+ for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+ {
+ errno = 0;
+ ptrace (PTRACE_POKETEXT, pid,
+ /* Coerce to a uintptr_t first to avoid potential gcc warning
+ about coercing an 8 byte integer to a 4 byte pointer. */
+ (PTRACE_TYPE_ARG3) (uintptr_t) addr,
+ (PTRACE_TYPE_ARG4) buffer[i]);
+ if (errno)
+ return errno;
+ }
+
+ return 0;
+}
+
+static void
+linux_look_up_symbols (void)
+{
+#ifdef USE_THREAD_DB
+ struct process_info *proc = current_process ();
+
+ if (proc->priv->thread_db != NULL)
+ return;
+
+ /* If the kernel supports tracing clones, then we don't need to
+ use the magic thread event breakpoint to learn about
+ threads. */
+ thread_db_init (!linux_supports_traceclone ());
+#endif
+}
+
+static void
+linux_request_interrupt (void)
+{
+ extern unsigned long signal_pid;
+
+ /* Send a SIGINT to the process group. This acts just like the user
+ typed a ^C on the controlling terminal. */
+ kill (-signal_pid, SIGINT);
+}
+
+/* Copy LEN bytes from inferior's auxiliary vector starting at OFFSET
+ to debugger memory starting at MYADDR. */
+
+static int
+linux_read_auxv (CORE_ADDR offset, unsigned char *myaddr, unsigned int len)
+{
+ char filename[PATH_MAX];
+ int fd, n;
+ int pid = lwpid_of (current_thread);
+
+ xsnprintf (filename, sizeof filename, "/proc/%d/auxv", pid);
+
+ fd = open (filename, O_RDONLY);
+ if (fd < 0)
+ return -1;
+
+ if (offset != (CORE_ADDR) 0
+ && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
+ n = -1;
+ else
+ n = read (fd, myaddr, len);
+
+ close (fd);
+
+ return n;
+}
+
+/* These breakpoint and watchpoint related wrapper functions simply
+ pass on the function call if the target has registered a
+ corresponding function. */
+
+static int
+linux_supports_z_point_type (char z_type)
+{
+ return (the_low_target.supports_z_point_type != NULL
+ && the_low_target.supports_z_point_type (z_type));
+}
+
+static int
+linux_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
+ int size, struct raw_breakpoint *bp)
+{
+ if (type == raw_bkpt_type_sw)
+ return insert_memory_breakpoint (bp);
+ else if (the_low_target.insert_point != NULL)
+ return the_low_target.insert_point (type, addr, size, bp);
+ else
+ /* Unsupported (see target.h). */
+ return 1;
+}
+
+static int
+linux_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
+ int size, struct raw_breakpoint *bp)
+{
+ if (type == raw_bkpt_type_sw)
+ return remove_memory_breakpoint (bp);
+ else if (the_low_target.remove_point != NULL)
+ return the_low_target.remove_point (type, addr, size, bp);
+ else
+ /* Unsupported (see target.h). */
+ return 1;
+}
+
+/* Implement the to_stopped_by_sw_breakpoint target_ops
+ method. */
+
+static int
+linux_stopped_by_sw_breakpoint (void)
+{
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+
+ return (lwp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT);
+}
+
+/* Implement the to_supports_stopped_by_sw_breakpoint target_ops
+ method. */
+
+static int
+linux_supports_stopped_by_sw_breakpoint (void)
+{
+ return USE_SIGTRAP_SIGINFO;
+}
+
+/* Implement the to_stopped_by_hw_breakpoint target_ops
+ method. */
+
+static int
+linux_stopped_by_hw_breakpoint (void)
+{
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+
+ return (lwp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT);
+}
+
+/* Implement the to_supports_stopped_by_hw_breakpoint target_ops
+ method. */
+
+static int
+linux_supports_stopped_by_hw_breakpoint (void)
+{
+ return USE_SIGTRAP_SIGINFO;
+}
+
+/* Implement the supports_conditional_breakpoints target_ops
+ method. */
+
+static int
+linux_supports_conditional_breakpoints (void)
+{
+ /* GDBserver needs to step over the breakpoint if the condition is
+ false. GDBserver software single step is too simple, so disable
+ conditional breakpoints if the target doesn't have hardware single
+ step. */
+ return can_hardware_single_step ();
+}
+
+static int
+linux_stopped_by_watchpoint (void)
+{
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+
+ return lwp->stop_reason == TARGET_STOPPED_BY_WATCHPOINT;
+}
+
+static CORE_ADDR
+linux_stopped_data_address (void)
+{
+ struct lwp_info *lwp = get_thread_lwp (current_thread);
+
+ return lwp->stopped_data_address;
+}
+
+#if defined(__UCLIBC__) && defined(HAS_NOMMU) \
+ && defined(PT_TEXT_ADDR) && defined(PT_DATA_ADDR) \
+ && defined(PT_TEXT_END_ADDR)
+
+/* This is only used for targets that define PT_TEXT_ADDR,
+ PT_DATA_ADDR and PT_TEXT_END_ADDR. If those are not defined, supposedly
+ the target has different ways of acquiring this information, like
+ loadmaps. */
+
+/* Under uClinux, programs are loaded at non-zero offsets, which we need
+ to tell gdb about. */
+
+static int
+linux_read_offsets (CORE_ADDR *text_p, CORE_ADDR *data_p)
+{
+ unsigned long text, text_end, data;
+ int pid = lwpid_of (current_thread);
+
+ errno = 0;
+
+ text = ptrace (PTRACE_PEEKUSER, pid, (PTRACE_TYPE_ARG3) PT_TEXT_ADDR,
+ (PTRACE_TYPE_ARG4) 0);
+ text_end = ptrace (PTRACE_PEEKUSER, pid, (PTRACE_TYPE_ARG3) PT_TEXT_END_ADDR,
+ (PTRACE_TYPE_ARG4) 0);
+ data = ptrace (PTRACE_PEEKUSER, pid, (PTRACE_TYPE_ARG3) PT_DATA_ADDR,
+ (PTRACE_TYPE_ARG4) 0);
+
+ if (errno == 0)
+ {
+ /* Both text and data offsets produced at compile-time (and so
+ used by gdb) are relative to the beginning of the program,
+ with the data segment immediately following the text segment.
+ However, the actual runtime layout in memory may put the data
+ somewhere else, so when we send gdb a data base-address, we
+ use the real data base address and subtract the compile-time
+ data base-address from it (which is just the length of the
+ text segment). BSS immediately follows data in both
+ cases. */
+ *text_p = text;
+ *data_p = data - (text_end - text);
+
+ return 1;
+ }
+ return 0;
+}
+#endif
+
+static int
+linux_qxfer_osdata (const char *annex,
+ unsigned char *readbuf, unsigned const char *writebuf,
+ CORE_ADDR offset, int len)
+{
+ return linux_common_xfer_osdata (annex, readbuf, offset, len);
+}
+
+/* Convert a native/host siginfo object, into/from the siginfo in the
+ layout of the inferiors' architecture. */
+
+static void
+siginfo_fixup (siginfo_t *siginfo, void *inf_siginfo, int direction)
+{
+ int done = 0;
+
+ if (the_low_target.siginfo_fixup != NULL)
+ done = the_low_target.siginfo_fixup (siginfo, inf_siginfo, direction);
+
+ /* If there was no callback, or the callback didn't do anything,
+ then just do a straight memcpy. */
+ if (!done)
+ {
+ if (direction == 1)
+ memcpy (siginfo, inf_siginfo, sizeof (siginfo_t));
+ else
+ memcpy (inf_siginfo, siginfo, sizeof (siginfo_t));
+ }
+}
+
+static int
+linux_xfer_siginfo (const char *annex, unsigned char *readbuf,
+ unsigned const char *writebuf, CORE_ADDR offset, int len)
+{
+ int pid;
+ siginfo_t siginfo;
+ char inf_siginfo[sizeof (siginfo_t)];
+
+ if (current_thread == NULL)
+ return -1;
+
+ pid = lwpid_of (current_thread);
if (debug_threads)
+ debug_printf ("%s siginfo for lwp %d.\n",
+ readbuf != NULL ? "Reading" : "Writing",
+ pid);
+
+ if (offset >= sizeof (siginfo))
+ return -1;
+
+ if (ptrace (PTRACE_GETSIGINFO, pid, (PTRACE_TYPE_ARG3) 0, &siginfo) != 0)
+ return -1;
+
+ /* When GDBSERVER is built as a 64-bit application, ptrace writes into
+ SIGINFO an object with 64-bit layout. Since debugging a 32-bit
+ inferior with a 64-bit GDBSERVER should look the same as debugging it
+ with a 32-bit GDBSERVER, we need to convert it. */
+ siginfo_fixup (&siginfo, inf_siginfo, 0);
+
+ if (offset + len > sizeof (siginfo))
+ len = sizeof (siginfo) - offset;
+
+ if (readbuf != NULL)
+ memcpy (readbuf, inf_siginfo + offset, len);
+ else
{
- /* Dump up to four bytes. */
- unsigned int val = * (unsigned int *) myaddr;
- if (len == 1)
- val = val & 0xff;
- else if (len == 2)
- val = val & 0xffff;
- else if (len == 3)
- val = val & 0xffffff;
- fprintf (stderr, "Writing %0*x to 0x%08lx\n", 2 * ((len < 4) ? len : 4),
- val, (long)memaddr);
+ memcpy (inf_siginfo + offset, writebuf, len);
+
+ /* Convert back to ptrace layout before flushing it out. */
+ siginfo_fixup (&siginfo, inf_siginfo, 1);
+
+ if (ptrace (PTRACE_SETSIGINFO, pid, (PTRACE_TYPE_ARG3) 0, &siginfo) != 0)
+ return -1;
}
- /* Fill start and end extra bytes of buffer with existing memory data. */
+ return len;
+}
- /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
- about coercing an 8 byte integer to a 4 byte pointer. */
- buffer[0] = ptrace (PTRACE_PEEKTEXT, pid,
- (PTRACE_ARG3_TYPE) (uintptr_t) addr, 0);
+/* SIGCHLD handler that serves two purposes: In non-stop/async mode,
+ so we notice when children change state; as the handler for the
+ sigsuspend in my_waitpid. */
- if (count > 1)
+static void
+sigchld_handler (int signo)
+{
+ int old_errno = errno;
+
+ if (debug_threads)
{
- buffer[count - 1]
- = ptrace (PTRACE_PEEKTEXT, pid,
- /* Coerce to a uintptr_t first to avoid potential gcc warning
- about coercing an 8 byte integer to a 4 byte pointer. */
- (PTRACE_ARG3_TYPE) (uintptr_t) (addr + (count - 1)
- * sizeof (PTRACE_XFER_TYPE)),
- 0);
+ do
+ {
+ /* fprintf is not async-signal-safe, so call write
+ directly. */
+ if (write (2, "sigchld_handler\n",
+ sizeof ("sigchld_handler\n") - 1) < 0)
+ break; /* just ignore */
+ } while (0);
}
- /* Copy data to be written over corresponding part of buffer */
+ if (target_is_async_p ())
+ async_file_mark (); /* trigger a linux_wait */
- memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)), myaddr, len);
+ errno = old_errno;
+}
- /* Write the entire buffer. */
+static int
+linux_supports_non_stop (void)
+{
+ return 1;
+}
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+static int
+linux_async (int enable)
+{
+ int previous = target_is_async_p ();
+
+ if (debug_threads)
+ debug_printf ("linux_async (%d), previous=%d\n",
+ enable, previous);
+
+ if (previous != enable)
{
- errno = 0;
- ptrace (PTRACE_POKETEXT, pid,
- /* Coerce to a uintptr_t first to avoid potential gcc warning
- about coercing an 8 byte integer to a 4 byte pointer. */
- (PTRACE_ARG3_TYPE) (uintptr_t) addr,
- (PTRACE_ARG4_TYPE) buffer[i]);
- if (errno)
- return errno;
+ sigset_t mask;
+ sigemptyset (&mask);
+ sigaddset (&mask, SIGCHLD);
+
+ sigprocmask (SIG_BLOCK, &mask, NULL);
+
+ if (enable)
+ {
+ if (pipe (linux_event_pipe) == -1)
+ {
+ linux_event_pipe[0] = -1;
+ linux_event_pipe[1] = -1;
+ sigprocmask (SIG_UNBLOCK, &mask, NULL);
+
+ warning ("creating event pipe failed.");
+ return previous;
+ }
+
+ fcntl (linux_event_pipe[0], F_SETFL, O_NONBLOCK);
+ fcntl (linux_event_pipe[1], F_SETFL, O_NONBLOCK);
+
+ /* Register the event loop handler. */
+ add_file_handler (linux_event_pipe[0],
+ handle_target_event, NULL);
+
+ /* Always trigger a linux_wait. */
+ async_file_mark ();
+ }
+ else
+ {
+ delete_file_handler (linux_event_pipe[0]);
+
+ close (linux_event_pipe[0]);
+ close (linux_event_pipe[1]);
+ linux_event_pipe[0] = -1;
+ linux_event_pipe[1] = -1;
+ }
+
+ sigprocmask (SIG_UNBLOCK, &mask, NULL);
+ }
+
+ return previous;
+}
+
+static int
+linux_start_non_stop (int nonstop)
+{
+ /* Register or unregister from event-loop accordingly. */
+ linux_async (nonstop);
+
+ if (target_is_async_p () != (nonstop != 0))
+ return -1;
+
+ return 0;
+}
+
+static int
+linux_supports_multi_process (void)
+{
+ return 1;
+}
+
+/* Check if fork events are supported. */
+
+static int
+linux_supports_fork_events (void)
+{
+ return linux_supports_tracefork ();
+}
+
+/* Check if vfork events are supported. */
+
+static int
+linux_supports_vfork_events (void)
+{
+ return linux_supports_tracefork ();
+}
+
+/* Callback for 'find_inferior'. Set the (possibly changed) ptrace
+ options for the specified lwp. */
+
+static int
+reset_lwp_ptrace_options_callback (struct inferior_list_entry *entry,
+ void *args)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+ struct lwp_info *lwp = get_thread_lwp (thread);
+
+ if (!lwp->stopped)
+ {
+ /* Stop the lwp so we can modify its ptrace options. */
+ lwp->must_set_ptrace_flags = 1;
+ linux_stop_lwp (lwp);
+ }
+ else
+ {
+ /* Already stopped; go ahead and set the ptrace options. */
+ struct process_info *proc = find_process_pid (pid_of (thread));
+ int options = linux_low_ptrace_options (proc->attached);
+
+ linux_enable_event_reporting (lwpid_of (thread), options);
+ lwp->must_set_ptrace_flags = 0;
+ }
+
+ return 0;
+}
+
+/* Target hook for 'handle_new_gdb_connection'. Causes a reset of the
+ ptrace flags for all inferiors. This is in case the new GDB connection
+ doesn't support the same set of events that the previous one did. */
+
+static void
+linux_handle_new_gdb_connection (void)
+{
+ pid_t pid;
+
+ /* Request that all the lwps reset their ptrace options. */
+ find_inferior (&all_threads, reset_lwp_ptrace_options_callback , &pid);
+}
+
+static int
+linux_supports_disable_randomization (void)
+{
+#ifdef HAVE_PERSONALITY
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+static int
+linux_supports_agent (void)
+{
+ return 1;
+}
+
+static int
+linux_supports_range_stepping (void)
+{
+ if (*the_low_target.supports_range_stepping == NULL)
+ return 0;
+
+ return (*the_low_target.supports_range_stepping) ();
+}
+
+/* Enumerate spufs IDs for process PID. */
+static int
+spu_enumerate_spu_ids (long pid, unsigned char *buf, CORE_ADDR offset, int len)
+{
+ int pos = 0;
+ int written = 0;
+ char path[128];
+ DIR *dir;
+ struct dirent *entry;
+
+ sprintf (path, "/proc/%ld/fd", pid);
+ dir = opendir (path);
+ if (!dir)
+ return -1;
+
+ rewinddir (dir);
+ while ((entry = readdir (dir)) != NULL)
+ {
+ struct stat st;
+ struct statfs stfs;
+ int fd;
+
+ fd = atoi (entry->d_name);
+ if (!fd)
+ continue;
+
+ sprintf (path, "/proc/%ld/fd/%d", pid, fd);
+ if (stat (path, &st) != 0)
+ continue;
+ if (!S_ISDIR (st.st_mode))
+ continue;
+
+ if (statfs (path, &stfs) != 0)
+ continue;
+ if (stfs.f_type != SPUFS_MAGIC)
+ continue;
+
+ if (pos >= offset && pos + 4 <= offset + len)
+ {
+ *(unsigned int *)(buf + pos - offset) = fd;
+ written += 4;
+ }
+ pos += 4;
+ }
+
+ closedir (dir);
+ return written;
+}
+
+/* Implements the to_xfer_partial interface for the TARGET_OBJECT_SPU
+ object type, using the /proc file system. */
+static int
+linux_qxfer_spu (const char *annex, unsigned char *readbuf,
+ unsigned const char *writebuf,
+ CORE_ADDR offset, int len)
+{
+ long pid = lwpid_of (current_thread);
+ char buf[128];
+ int fd = 0;
+ int ret = 0;
+
+ if (!writebuf && !readbuf)
+ return -1;
+
+ if (!*annex)
+ {
+ if (!readbuf)
+ return -1;
+ else
+ return spu_enumerate_spu_ids (pid, readbuf, offset, len);
}
- return 0;
-}
+ sprintf (buf, "/proc/%ld/fd/%s", pid, annex);
+ fd = open (buf, writebuf? O_WRONLY : O_RDONLY);
+ if (fd <= 0)
+ return -1;
-static int linux_supports_tracefork_flag;
+ if (offset != 0
+ && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
+ {
+ close (fd);
+ return 0;
+ }
-/* Helper functions for linux_test_for_tracefork, called via clone (). */
+ if (writebuf)
+ ret = write (fd, writebuf, (size_t) len);
+ else
+ ret = read (fd, readbuf, (size_t) len);
-static int
-linux_tracefork_grandchild (void *arg)
-{
- _exit (0);
+ close (fd);
+ return ret;
}
-#define STACK_SIZE 4096
-
-static int
-linux_tracefork_child (void *arg)
+#if defined PT_GETDSBT || defined PTRACE_GETFDPIC
+struct target_loadseg
{
- ptrace (PTRACE_TRACEME, 0, 0, 0);
- kill (getpid (), SIGSTOP);
-#ifdef __ia64__
- __clone2 (linux_tracefork_grandchild, arg, STACK_SIZE,
- CLONE_VM | SIGCHLD, NULL);
-#else
- clone (linux_tracefork_grandchild, arg + STACK_SIZE,
- CLONE_VM | SIGCHLD, NULL);
-#endif
- _exit (0);
-}
-
-/* Determine if PTRACE_O_TRACEFORK can be used to follow fork events. Make
- sure that we can enable the option, and that it had the desired
- effect. */
+ /* Core address to which the segment is mapped. */
+ Elf32_Addr addr;
+ /* VMA recorded in the program header. */
+ Elf32_Addr p_vaddr;
+ /* Size of this segment in memory. */
+ Elf32_Word p_memsz;
+};
-static void
-linux_test_for_tracefork (void)
+# if defined PT_GETDSBT
+struct target_loadmap
{
- int child_pid, ret, status;
- long second_pid;
- char *stack = xmalloc (STACK_SIZE * 4);
-
- linux_supports_tracefork_flag = 0;
-
- /* Use CLONE_VM instead of fork, to support uClinux (no MMU). */
-#ifdef __ia64__
- child_pid = __clone2 (linux_tracefork_child, stack, STACK_SIZE,
- CLONE_VM | SIGCHLD, stack + STACK_SIZE * 2);
-#else
- child_pid = clone (linux_tracefork_child, stack + STACK_SIZE,
- CLONE_VM | SIGCHLD, stack + STACK_SIZE * 2);
-#endif
- if (child_pid == -1)
- perror_with_name ("clone");
-
- ret = my_waitpid (child_pid, &status, 0);
- if (ret == -1)
- perror_with_name ("waitpid");
- else if (ret != child_pid)
- error ("linux_test_for_tracefork: waitpid: unexpected result %d.", ret);
- if (! WIFSTOPPED (status))
- error ("linux_test_for_tracefork: waitpid: unexpected status %d.", status);
+ /* Protocol version number, must be zero. */
+ Elf32_Word version;
+ /* Pointer to the DSBT table, its size, and the DSBT index. */
+ unsigned *dsbt_table;
+ unsigned dsbt_size, dsbt_index;
+ /* Number of segments in this map. */
+ Elf32_Word nsegs;
+ /* The actual memory map. */
+ struct target_loadseg segs[/*nsegs*/];
+};
+# define LINUX_LOADMAP PT_GETDSBT
+# define LINUX_LOADMAP_EXEC PTRACE_GETDSBT_EXEC
+# define LINUX_LOADMAP_INTERP PTRACE_GETDSBT_INTERP
+# else
+struct target_loadmap
+{
+ /* Protocol version number, must be zero. */
+ Elf32_Half version;
+ /* Number of segments in this map. */
+ Elf32_Half nsegs;
+ /* The actual memory map. */
+ struct target_loadseg segs[/*nsegs*/];
+};
+# define LINUX_LOADMAP PTRACE_GETFDPIC
+# define LINUX_LOADMAP_EXEC PTRACE_GETFDPIC_EXEC
+# define LINUX_LOADMAP_INTERP PTRACE_GETFDPIC_INTERP
+# endif
- ret = ptrace (PTRACE_SETOPTIONS, child_pid, 0,
- (PTRACE_ARG4_TYPE) PTRACE_O_TRACEFORK);
- if (ret != 0)
- {
- ret = ptrace (PTRACE_KILL, child_pid, 0, 0);
- if (ret != 0)
- {
- warning ("linux_test_for_tracefork: failed to kill child");
- return;
- }
+static int
+linux_read_loadmap (const char *annex, CORE_ADDR offset,
+ unsigned char *myaddr, unsigned int len)
+{
+ int pid = lwpid_of (current_thread);
+ int addr = -1;
+ struct target_loadmap *data = NULL;
+ unsigned int actual_length, copy_length;
+
+ if (strcmp (annex, "exec") == 0)
+ addr = (int) LINUX_LOADMAP_EXEC;
+ else if (strcmp (annex, "interp") == 0)
+ addr = (int) LINUX_LOADMAP_INTERP;
+ else
+ return -1;
- ret = my_waitpid (child_pid, &status, 0);
- if (ret != child_pid)
- warning ("linux_test_for_tracefork: failed to wait for killed child");
- else if (!WIFSIGNALED (status))
- warning ("linux_test_for_tracefork: unexpected wait status 0x%x from "
- "killed child", status);
+ if (ptrace (LINUX_LOADMAP, pid, addr, &data) != 0)
+ return -1;
- return;
- }
+ if (data == NULL)
+ return -1;
- ret = ptrace (PTRACE_CONT, child_pid, 0, 0);
- if (ret != 0)
- warning ("linux_test_for_tracefork: failed to resume child");
+ actual_length = sizeof (struct target_loadmap)
+ + sizeof (struct target_loadseg) * data->nsegs;
- ret = my_waitpid (child_pid, &status, 0);
+ if (offset < 0 || offset > actual_length)
+ return -1;
- if (ret == child_pid && WIFSTOPPED (status)
- && status >> 16 == PTRACE_EVENT_FORK)
- {
- second_pid = 0;
- ret = ptrace (PTRACE_GETEVENTMSG, child_pid, 0, &second_pid);
- if (ret == 0 && second_pid != 0)
- {
- int second_status;
+ copy_length = actual_length - offset < len ? actual_length - offset : len;
+ memcpy (myaddr, (char *) data + offset, copy_length);
+ return copy_length;
+}
+#else
+# define linux_read_loadmap NULL
+#endif /* defined PT_GETDSBT || defined PTRACE_GETFDPIC */
- linux_supports_tracefork_flag = 1;
- my_waitpid (second_pid, &second_status, 0);
- ret = ptrace (PTRACE_KILL, second_pid, 0, 0);
- if (ret != 0)
- warning ("linux_test_for_tracefork: failed to kill second child");
- my_waitpid (second_pid, &status, 0);
- }
- }
- else
- warning ("linux_test_for_tracefork: unexpected result from waitpid "
- "(%d, status 0x%x)", ret, status);
+static void
+linux_process_qsupported (const char *query)
+{
+ if (the_low_target.process_qsupported != NULL)
+ the_low_target.process_qsupported (query);
+}
- do
- {
- ret = ptrace (PTRACE_KILL, child_pid, 0, 0);
- if (ret != 0)
- warning ("linux_test_for_tracefork: failed to kill child");
- my_waitpid (child_pid, &status, 0);
- }
- while (WIFSTOPPED (status));
+static int
+linux_supports_tracepoints (void)
+{
+ if (*the_low_target.supports_tracepoints == NULL)
+ return 0;
- free (stack);
+ return (*the_low_target.supports_tracepoints) ();
}
-
-static void
-linux_look_up_symbols (void)
+static CORE_ADDR
+linux_read_pc (struct regcache *regcache)
{
-#ifdef USE_THREAD_DB
- struct process_info *proc = current_process ();
-
- if (proc->private->thread_db != NULL)
- return;
+ if (the_low_target.get_pc == NULL)
+ return 0;
- thread_db_init (!linux_supports_tracefork_flag);
-#endif
+ return (*the_low_target.get_pc) (regcache);
}
static void
-linux_request_interrupt (void)
+linux_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
- extern unsigned long signal_pid;
-
- if (!ptid_equal (cont_thread, null_ptid)
- && !ptid_equal (cont_thread, minus_one_ptid))
- {
- struct lwp_info *lwp;
- int lwpid;
+ gdb_assert (the_low_target.set_pc != NULL);
- lwp = get_thread_lwp (current_inferior);
- lwpid = lwpid_of (lwp);
- kill_lwp (lwpid, SIGINT);
- }
- else
- kill_lwp (signal_pid, SIGINT);
+ (*the_low_target.set_pc) (regcache, pc);
}
-/* Copy LEN bytes from inferior's auxiliary vector starting at OFFSET
- to debugger memory starting at MYADDR. */
-
static int
-linux_read_auxv (CORE_ADDR offset, unsigned char *myaddr, unsigned int len)
+linux_thread_stopped (struct thread_info *thread)
{
- char filename[PATH_MAX];
- int fd, n;
- int pid = lwpid_of (get_thread_lwp (current_inferior));
-
- snprintf (filename, sizeof filename, "/proc/%d/auxv", pid);
+ return get_thread_lwp (thread)->stopped;
+}
- fd = open (filename, O_RDONLY);
- if (fd < 0)
- return -1;
+/* This exposes stop-all-threads functionality to other modules. */
- if (offset != (CORE_ADDR) 0
- && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
- n = -1;
- else
- n = read (fd, myaddr, len);
+static void
+linux_pause_all (int freeze)
+{
+ stop_all_lwps (freeze, NULL);
+}
- close (fd);
+/* This exposes unstop-all-threads functionality to other gdbserver
+ modules. */
- return n;
+static void
+linux_unpause_all (int unfreeze)
+{
+ unstop_all_lwps (unfreeze, NULL);
}
-/* These breakpoint and watchpoint related wrapper functions simply
- pass on the function call if the target has registered a
- corresponding function. */
-
static int
-linux_insert_point (char type, CORE_ADDR addr, int len)
+linux_prepare_to_access_memory (void)
{
- if (the_low_target.insert_point != NULL)
- return the_low_target.insert_point (type, addr, len);
- else
- /* Unsupported (see target.h). */
- return 1;
+ /* Neither ptrace nor /proc/PID/mem allow accessing memory through a
+ running LWP. */
+ if (non_stop)
+ linux_pause_all (1);
+ return 0;
}
-static int
-linux_remove_point (char type, CORE_ADDR addr, int len)
+static void
+linux_done_accessing_memory (void)
{
- if (the_low_target.remove_point != NULL)
- return the_low_target.remove_point (type, addr, len);
- else
- /* Unsupported (see target.h). */
- return 1;
+ /* Neither ptrace nor /proc/PID/mem allow accessing memory through a
+ running LWP. */
+ if (non_stop)
+ linux_unpause_all (1);
}
static int
-linux_stopped_by_watchpoint (void)
+linux_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint, CORE_ADDR tpaddr,
+ CORE_ADDR collector,
+ CORE_ADDR lockaddr,
+ ULONGEST orig_size,
+ CORE_ADDR *jump_entry,
+ CORE_ADDR *trampoline,
+ ULONGEST *trampoline_size,
+ unsigned char *jjump_pad_insn,
+ ULONGEST *jjump_pad_insn_size,
+ CORE_ADDR *adjusted_insn_addr,
+ CORE_ADDR *adjusted_insn_addr_end,
+ char *err)
{
- if (the_low_target.stopped_by_watchpoint != NULL)
- return the_low_target.stopped_by_watchpoint ();
- else
- return 0;
+ return (*the_low_target.install_fast_tracepoint_jump_pad)
+ (tpoint, tpaddr, collector, lockaddr, orig_size,
+ jump_entry, trampoline, trampoline_size,
+ jjump_pad_insn, jjump_pad_insn_size,
+ adjusted_insn_addr, adjusted_insn_addr_end,
+ err);
}
-static CORE_ADDR
-linux_stopped_data_address (void)
+static struct emit_ops *
+linux_emit_ops (void)
{
- if (the_low_target.stopped_data_address != NULL)
- return the_low_target.stopped_data_address ();
+ if (the_low_target.emit_ops != NULL)
+ return (*the_low_target.emit_ops) ();
else
- return 0;
+ return NULL;
}
-#if defined(__UCLIBC__) && defined(HAS_NOMMU)
-#if defined(__mcoldfire__)
-/* These should really be defined in the kernel's ptrace.h header. */
-#define PT_TEXT_ADDR 49*4
-#define PT_DATA_ADDR 50*4
-#define PT_TEXT_END_ADDR 51*4
-#endif
+static int
+linux_get_min_fast_tracepoint_insn_len (void)
+{
+ return (*the_low_target.get_min_fast_tracepoint_insn_len) ();
+}
-/* Under uClinux, programs are loaded at non-zero offsets, which we need
- to tell gdb about. */
+/* Extract &phdr and num_phdr in the inferior. Return 0 on success. */
static int
-linux_read_offsets (CORE_ADDR *text_p, CORE_ADDR *data_p)
+get_phdr_phnum_from_proc_auxv (const int pid, const int is_elf64,
+ CORE_ADDR *phdr_memaddr, int *num_phdr)
{
-#if defined(PT_TEXT_ADDR) && defined(PT_DATA_ADDR) && defined(PT_TEXT_END_ADDR)
- unsigned long text, text_end, data;
- int pid = lwpid_of (get_thread_lwp (current_inferior));
+ char filename[PATH_MAX];
+ int fd;
+ const int auxv_size = is_elf64
+ ? sizeof (Elf64_auxv_t) : sizeof (Elf32_auxv_t);
+ char buf[sizeof (Elf64_auxv_t)]; /* The larger of the two. */
- errno = 0;
+ xsnprintf (filename, sizeof filename, "/proc/%d/auxv", pid);
- text = ptrace (PTRACE_PEEKUSER, pid, (long)PT_TEXT_ADDR, 0);
- text_end = ptrace (PTRACE_PEEKUSER, pid, (long)PT_TEXT_END_ADDR, 0);
- data = ptrace (PTRACE_PEEKUSER, pid, (long)PT_DATA_ADDR, 0);
+ fd = open (filename, O_RDONLY);
+ if (fd < 0)
+ return 1;
- if (errno == 0)
+ *phdr_memaddr = 0;
+ *num_phdr = 0;
+ while (read (fd, buf, auxv_size) == auxv_size
+ && (*phdr_memaddr == 0 || *num_phdr == 0))
{
- /* Both text and data offsets produced at compile-time (and so
- used by gdb) are relative to the beginning of the program,
- with the data segment immediately following the text segment.
- However, the actual runtime layout in memory may put the data
- somewhere else, so when we send gdb a data base-address, we
- use the real data base address and subtract the compile-time
- data base-address from it (which is just the length of the
- text segment). BSS immediately follows data in both
- cases. */
- *text_p = text;
- *data_p = data - (text_end - text);
+ if (is_elf64)
+ {
+ Elf64_auxv_t *const aux = (Elf64_auxv_t *) buf;
- return 1;
+ switch (aux->a_type)
+ {
+ case AT_PHDR:
+ *phdr_memaddr = aux->a_un.a_val;
+ break;
+ case AT_PHNUM:
+ *num_phdr = aux->a_un.a_val;
+ break;
+ }
+ }
+ else
+ {
+ Elf32_auxv_t *const aux = (Elf32_auxv_t *) buf;
+
+ switch (aux->a_type)
+ {
+ case AT_PHDR:
+ *phdr_memaddr = aux->a_un.a_val;
+ break;
+ case AT_PHNUM:
+ *num_phdr = aux->a_un.a_val;
+ break;
+ }
+ }
}
-#endif
- return 0;
-}
-#endif
-static int
-compare_ints (const void *xa, const void *xb)
-{
- int a = *(const int *)xa;
- int b = *(const int *)xb;
+ close (fd);
+
+ if (*phdr_memaddr == 0 || *num_phdr == 0)
+ {
+ warning ("Unexpected missing AT_PHDR and/or AT_PHNUM: "
+ "phdr_memaddr = %ld, phdr_num = %d",
+ (long) *phdr_memaddr, *num_phdr);
+ return 2;
+ }
- return a - b;
+ return 0;
}
-static int *
-unique (int *b, int *e)
+/* Return &_DYNAMIC (via PT_DYNAMIC) in the inferior, or 0 if not present. */
+
+static CORE_ADDR
+get_dynamic (const int pid, const int is_elf64)
{
- int *d = b;
- while (++b != e)
- if (*d != *b)
- *++d = *b;
- return ++d;
-}
+ CORE_ADDR phdr_memaddr, relocation;
+ int num_phdr, i;
+ unsigned char *phdr_buf;
+ const int phdr_size = is_elf64 ? sizeof (Elf64_Phdr) : sizeof (Elf32_Phdr);
-/* Given PID, iterates over all threads in that process.
+ if (get_phdr_phnum_from_proc_auxv (pid, is_elf64, &phdr_memaddr, &num_phdr))
+ return 0;
- Information about each thread, in a format suitable for qXfer:osdata:thread
- is printed to BUFFER, if it's not NULL. BUFFER is assumed to be already
- initialized, and the caller is responsible for finishing and appending '\0'
- to it.
+ gdb_assert (num_phdr < 100); /* Basic sanity check. */
+ phdr_buf = alloca (num_phdr * phdr_size);
- The list of cores that threads are running on is assigned to *CORES, if it
- is not NULL. If no cores are found, *CORES will be set to NULL. Caller
- should free *CORES. */
+ if (linux_read_memory (phdr_memaddr, phdr_buf, num_phdr * phdr_size))
+ return 0;
-static void
-list_threads (int pid, struct buffer *buffer, char **cores)
-{
- int count = 0;
- int allocated = 10;
- int *core_numbers = xmalloc (sizeof (int) * allocated);
- char pathname[128];
- DIR *dir;
- struct dirent *dp;
- struct stat statbuf;
+ /* Compute relocation: it is expected to be 0 for "regular" executables,
+ non-zero for PIE ones. */
+ relocation = -1;
+ for (i = 0; relocation == -1 && i < num_phdr; i++)
+ if (is_elf64)
+ {
+ Elf64_Phdr *const p = (Elf64_Phdr *) (phdr_buf + i * phdr_size);
- sprintf (pathname, "/proc/%d/task", pid);
- if (stat (pathname, &statbuf) == 0 && S_ISDIR (statbuf.st_mode))
- {
- dir = opendir (pathname);
- if (!dir)
- {
- free (core_numbers);
- return;
- }
+ if (p->p_type == PT_PHDR)
+ relocation = phdr_memaddr - p->p_vaddr;
+ }
+ else
+ {
+ Elf32_Phdr *const p = (Elf32_Phdr *) (phdr_buf + i * phdr_size);
- while ((dp = readdir (dir)) != NULL)
- {
- unsigned long lwp = strtoul (dp->d_name, NULL, 10);
+ if (p->p_type == PT_PHDR)
+ relocation = phdr_memaddr - p->p_vaddr;
+ }
- if (lwp != 0)
- {
- unsigned core = linux_core_of_thread (ptid_build (pid, lwp, 0));
+ if (relocation == -1)
+ {
+ /* PT_PHDR is optional, but necessary for PIE in general. Fortunately
+ any real world executables, including PIE executables, have always
+ PT_PHDR present. PT_PHDR is not present in some shared libraries or
+ in fpc (Free Pascal 2.4) binaries but neither of those have a need for
+ or present DT_DEBUG anyway (fpc binaries are statically linked).
- if (core != -1)
- {
- char s[sizeof ("4294967295")];
- sprintf (s, "%u", core);
+ Therefore if there exists DT_DEBUG there is always also PT_PHDR.
- if (count == allocated)
- {
- allocated *= 2;
- core_numbers = realloc (core_numbers,
- sizeof (int) * allocated);
- }
- core_numbers[count++] = core;
- if (buffer)
- buffer_xml_printf (buffer,
- "<item>"
- "<column name=\"pid\">%d</column>"
- "<column name=\"tid\">%s</column>"
- "<column name=\"core\">%s</column>"
- "</item>", pid, dp->d_name, s);
- }
- else
- {
- if (buffer)
- buffer_xml_printf (buffer,
- "<item>"
- "<column name=\"pid\">%d</column>"
- "<column name=\"tid\">%s</column>"
- "</item>", pid, dp->d_name);
- }
- }
- }
+ GDB could find RELOCATION also from AT_ENTRY - e_entry. */
+
+ return 0;
}
- if (cores)
+ for (i = 0; i < num_phdr; i++)
{
- *cores = NULL;
- if (count > 0)
+ if (is_elf64)
{
- struct buffer buffer2;
- int *b;
- int *e;
- qsort (core_numbers, count, sizeof (int), compare_ints);
+ Elf64_Phdr *const p = (Elf64_Phdr *) (phdr_buf + i * phdr_size);
- /* Remove duplicates. */
- b = core_numbers;
- e = unique (b, core_numbers + count);
-
- buffer_init (&buffer2);
-
- for (b = core_numbers; b != e; ++b)
- {
- char number[sizeof ("4294967295")];
- sprintf (number, "%u", *b);
- buffer_xml_printf (&buffer2, "%s%s",
- (b == core_numbers) ? "" : ",", number);
- }
- buffer_grow_str0 (&buffer2, "");
+ if (p->p_type == PT_DYNAMIC)
+ return p->p_vaddr + relocation;
+ }
+ else
+ {
+ Elf32_Phdr *const p = (Elf32_Phdr *) (phdr_buf + i * phdr_size);
- *cores = buffer_finish (&buffer2);
+ if (p->p_type == PT_DYNAMIC)
+ return p->p_vaddr + relocation;
}
}
- free (core_numbers);
+
+ return 0;
}
-static void
-show_process (int pid, const char *username, struct buffer *buffer)
+/* Return &_r_debug in the inferior, or -1 if not present. Return value
+ can be 0 if the inferior does not yet have the library list initialized.
+ We look for DT_MIPS_RLD_MAP first. MIPS executables use this instead of
+ DT_DEBUG, although they sometimes contain an unused DT_DEBUG entry too. */
+
+static CORE_ADDR
+get_r_debug (const int pid, const int is_elf64)
{
- char pathname[128];
- FILE *f;
- char cmd[MAXPATHLEN + 1];
+ CORE_ADDR dynamic_memaddr;
+ const int dyn_size = is_elf64 ? sizeof (Elf64_Dyn) : sizeof (Elf32_Dyn);
+ unsigned char buf[sizeof (Elf64_Dyn)]; /* The larger of the two. */
+ CORE_ADDR map = -1;
- sprintf (pathname, "/proc/%d/cmdline", pid);
+ dynamic_memaddr = get_dynamic (pid, is_elf64);
+ if (dynamic_memaddr == 0)
+ return map;
- if ((f = fopen (pathname, "r")) != NULL)
+ while (linux_read_memory (dynamic_memaddr, buf, dyn_size) == 0)
{
- size_t len = fread (cmd, 1, sizeof (cmd) - 1, f);
- if (len > 0)
+ if (is_elf64)
{
- char *cores = 0;
- int i;
- for (i = 0; i < len; i++)
- if (cmd[i] == '\0')
- cmd[i] = ' ';
- cmd[len] = '\0';
-
- buffer_xml_printf (buffer,
- "<item>"
- "<column name=\"pid\">%d</column>"
- "<column name=\"user\">%s</column>"
- "<column name=\"command\">%s</column>",
- pid,
- username,
- cmd);
-
- /* This only collects core numbers, and does not print threads. */
- list_threads (pid, NULL, &cores);
+ Elf64_Dyn *const dyn = (Elf64_Dyn *) buf;
+#ifdef DT_MIPS_RLD_MAP
+ union
+ {
+ Elf64_Xword map;
+ unsigned char buf[sizeof (Elf64_Xword)];
+ }
+ rld_map;
- if (cores)
+ if (dyn->d_tag == DT_MIPS_RLD_MAP)
{
- buffer_xml_printf (buffer,
- "<column name=\"cores\">%s</column>", cores);
- free (cores);
+ if (linux_read_memory (dyn->d_un.d_val,
+ rld_map.buf, sizeof (rld_map.buf)) == 0)
+ return rld_map.map;
+ else
+ break;
}
+#endif /* DT_MIPS_RLD_MAP */
- buffer_xml_printf (buffer, "</item>");
- }
- fclose (f);
- }
-}
+ if (dyn->d_tag == DT_DEBUG && map == -1)
+ map = dyn->d_un.d_val;
-static int
-linux_qxfer_osdata (const char *annex,
- unsigned char *readbuf, unsigned const char *writebuf,
- CORE_ADDR offset, int len)
-{
- /* We make the process list snapshot when the object starts to be
- read. */
- static const char *buf;
- static long len_avail = -1;
- static struct buffer buffer;
- int processes = 0;
- int threads = 0;
+ if (dyn->d_tag == DT_NULL)
+ break;
+ }
+ else
+ {
+ Elf32_Dyn *const dyn = (Elf32_Dyn *) buf;
+#ifdef DT_MIPS_RLD_MAP
+ union
+ {
+ Elf32_Word map;
+ unsigned char buf[sizeof (Elf32_Word)];
+ }
+ rld_map;
- DIR *dirp;
+ if (dyn->d_tag == DT_MIPS_RLD_MAP)
+ {
+ if (linux_read_memory (dyn->d_un.d_val,
+ rld_map.buf, sizeof (rld_map.buf)) == 0)
+ return rld_map.map;
+ else
+ break;
+ }
+#endif /* DT_MIPS_RLD_MAP */
- if (strcmp (annex, "processes") == 0)
- processes = 1;
- else if (strcmp (annex, "threads") == 0)
- threads = 1;
- else
- return 0;
+ if (dyn->d_tag == DT_DEBUG && map == -1)
+ map = dyn->d_un.d_val;
- if (!readbuf || writebuf)
- return 0;
+ if (dyn->d_tag == DT_NULL)
+ break;
+ }
- if (offset == 0)
- {
- if (len_avail != -1 && len_avail != 0)
- buffer_free (&buffer);
- len_avail = 0;
- buf = NULL;
- buffer_init (&buffer);
- if (processes)
- buffer_grow_str (&buffer, "<osdata type=\"processes\">");
- else if (threads)
- buffer_grow_str (&buffer, "<osdata type=\"threads\">");
-
- dirp = opendir ("/proc");
- if (dirp)
- {
- struct dirent *dp;
- while ((dp = readdir (dirp)) != NULL)
- {
- struct stat statbuf;
- char procentry[sizeof ("/proc/4294967295")];
-
- if (!isdigit (dp->d_name[0])
- || strlen (dp->d_name) > sizeof ("4294967295") - 1)
- continue;
-
- sprintf (procentry, "/proc/%s", dp->d_name);
- if (stat (procentry, &statbuf) == 0
- && S_ISDIR (statbuf.st_mode))
- {
- int pid = (int) strtoul (dp->d_name, NULL, 10);
-
- if (processes)
- {
- struct passwd *entry = getpwuid (statbuf.st_uid);
- show_process (pid, entry ? entry->pw_name : "?", &buffer);
- }
- else if (threads)
- {
- list_threads (pid, &buffer, NULL);
- }
- }
- }
-
- closedir (dirp);
- }
- buffer_grow_str0 (&buffer, "</osdata>\n");
- buf = buffer_finish (&buffer);
- len_avail = strlen (buf);
- }
-
- if (offset >= len_avail)
- {
- /* Done. Get rid of the data. */
- buffer_free (&buffer);
- buf = NULL;
- len_avail = 0;
- return 0;
+ dynamic_memaddr += dyn_size;
}
- if (len > len_avail - offset)
- len = len_avail - offset;
- memcpy (readbuf, buf + offset, len);
-
- return len;
+ return map;
}
-/* Convert a native/host siginfo object, into/from the siginfo in the
- layout of the inferiors' architecture. */
+/* Read one pointer from MEMADDR in the inferior. */
-static void
-siginfo_fixup (struct siginfo *siginfo, void *inf_siginfo, int direction)
+static int
+read_one_ptr (CORE_ADDR memaddr, CORE_ADDR *ptr, int ptr_size)
{
- int done = 0;
+ int ret;
- if (the_low_target.siginfo_fixup != NULL)
- done = the_low_target.siginfo_fixup (siginfo, inf_siginfo, direction);
+ /* Go through a union so this works on either big or little endian
+ hosts, when the inferior's pointer size is smaller than the size
+ of CORE_ADDR. It is assumed the inferior's endianness is the
+ same of the superior's. */
+ union
+ {
+ CORE_ADDR core_addr;
+ unsigned int ui;
+ unsigned char uc;
+ } addr;
- /* If there was no callback, or the callback didn't do anything,
- then just do a straight memcpy. */
- if (!done)
+ ret = linux_read_memory (memaddr, &addr.uc, ptr_size);
+ if (ret == 0)
{
- if (direction == 1)
- memcpy (siginfo, inf_siginfo, sizeof (struct siginfo));
+ if (ptr_size == sizeof (CORE_ADDR))
+ *ptr = addr.core_addr;
+ else if (ptr_size == sizeof (unsigned int))
+ *ptr = addr.ui;
else
- memcpy (inf_siginfo, siginfo, sizeof (struct siginfo));
+ gdb_assert_not_reached ("unhandled pointer size");
}
+ return ret;
}
-static int
-linux_xfer_siginfo (const char *annex, unsigned char *readbuf,
- unsigned const char *writebuf, CORE_ADDR offset, int len)
-{
- int pid;
- struct siginfo siginfo;
- char inf_siginfo[sizeof (struct siginfo)];
-
- if (current_inferior == NULL)
- return -1;
-
- pid = lwpid_of (get_thread_lwp (current_inferior));
-
- if (debug_threads)
- fprintf (stderr, "%s siginfo for lwp %d.\n",
- readbuf != NULL ? "Reading" : "Writing",
- pid);
-
- if (offset > sizeof (siginfo))
- return -1;
-
- if (ptrace (PTRACE_GETSIGINFO, pid, 0, &siginfo) != 0)
- return -1;
+struct link_map_offsets
+ {
+ /* Offset and size of r_debug.r_version. */
+ int r_version_offset;
- /* When GDBSERVER is built as a 64-bit application, ptrace writes into
- SIGINFO an object with 64-bit layout. Since debugging a 32-bit
- inferior with a 64-bit GDBSERVER should look the same as debugging it
- with a 32-bit GDBSERVER, we need to convert it. */
- siginfo_fixup (&siginfo, inf_siginfo, 0);
+ /* Offset and size of r_debug.r_map. */
+ int r_map_offset;
- if (offset + len > sizeof (siginfo))
- len = sizeof (siginfo) - offset;
+ /* Offset to l_addr field in struct link_map. */
+ int l_addr_offset;
- if (readbuf != NULL)
- memcpy (readbuf, inf_siginfo + offset, len);
- else
- {
- memcpy (inf_siginfo + offset, writebuf, len);
+ /* Offset to l_name field in struct link_map. */
+ int l_name_offset;
- /* Convert back to ptrace layout before flushing it out. */
- siginfo_fixup (&siginfo, inf_siginfo, 1);
+ /* Offset to l_ld field in struct link_map. */
+ int l_ld_offset;
- if (ptrace (PTRACE_SETSIGINFO, pid, 0, &siginfo) != 0)
- return -1;
- }
+ /* Offset to l_next field in struct link_map. */
+ int l_next_offset;
- return len;
-}
+ /* Offset to l_prev field in struct link_map. */
+ int l_prev_offset;
+ };
-/* SIGCHLD handler that serves two purposes: In non-stop/async mode,
- so we notice when children change state; as the handler for the
- sigsuspend in my_waitpid. */
+/* Construct qXfer:libraries-svr4:read reply. */
-static void
-sigchld_handler (int signo)
+static int
+linux_qxfer_libraries_svr4 (const char *annex, unsigned char *readbuf,
+ unsigned const char *writebuf,
+ CORE_ADDR offset, int len)
{
- int old_errno = errno;
+ char *document;
+ unsigned document_len;
+ struct process_info_private *const priv = current_process ()->priv;
+ char filename[PATH_MAX];
+ int pid, is_elf64;
- if (debug_threads)
- /* fprintf is not async-signal-safe, so call write directly. */
- write (2, "sigchld_handler\n", sizeof ("sigchld_handler\n") - 1);
+ static const struct link_map_offsets lmo_32bit_offsets =
+ {
+ 0, /* r_version offset. */
+ 4, /* r_debug.r_map offset. */
+ 0, /* l_addr offset in link_map. */
+ 4, /* l_name offset in link_map. */
+ 8, /* l_ld offset in link_map. */
+ 12, /* l_next offset in link_map. */
+ 16 /* l_prev offset in link_map. */
+ };
+
+ static const struct link_map_offsets lmo_64bit_offsets =
+ {
+ 0, /* r_version offset. */
+ 8, /* r_debug.r_map offset. */
+ 0, /* l_addr offset in link_map. */
+ 8, /* l_name offset in link_map. */
+ 16, /* l_ld offset in link_map. */
+ 24, /* l_next offset in link_map. */
+ 32 /* l_prev offset in link_map. */
+ };
+ const struct link_map_offsets *lmo;
+ unsigned int machine;
+ int ptr_size;
+ CORE_ADDR lm_addr = 0, lm_prev = 0;
+ int allocated = 1024;
+ char *p;
+ CORE_ADDR l_name, l_addr, l_ld, l_next, l_prev;
+ int header_done = 0;
- if (target_is_async_p ())
- async_file_mark (); /* trigger a linux_wait */
+ if (writebuf != NULL)
+ return -2;
+ if (readbuf == NULL)
+ return -1;
- errno = old_errno;
-}
+ pid = lwpid_of (current_thread);
+ xsnprintf (filename, sizeof filename, "/proc/%d/exe", pid);
+ is_elf64 = elf_64_file_p (filename, &machine);
+ lmo = is_elf64 ? &lmo_64bit_offsets : &lmo_32bit_offsets;
+ ptr_size = is_elf64 ? 8 : 4;
-static int
-linux_supports_non_stop (void)
-{
- return 1;
-}
+ while (annex[0] != '\0')
+ {
+ const char *sep;
+ CORE_ADDR *addrp;
+ int len;
+
+ sep = strchr (annex, '=');
+ if (sep == NULL)
+ break;
+
+ len = sep - annex;
+ if (len == 5 && startswith (annex, "start"))
+ addrp = &lm_addr;
+ else if (len == 4 && startswith (annex, "prev"))
+ addrp = &lm_prev;
+ else
+ {
+ annex = strchr (sep, ';');
+ if (annex == NULL)
+ break;
+ annex++;
+ continue;
+ }
-static int
-linux_async (int enable)
-{
- int previous = (linux_event_pipe[0] != -1);
+ annex = decode_address_to_semicolon (addrp, sep + 1);
+ }
- if (previous != enable)
+ if (lm_addr == 0)
{
- sigset_t mask;
- sigemptyset (&mask);
- sigaddset (&mask, SIGCHLD);
+ int r_version = 0;
- sigprocmask (SIG_BLOCK, &mask, NULL);
+ if (priv->r_debug == 0)
+ priv->r_debug = get_r_debug (pid, is_elf64);
- if (enable)
+ /* We failed to find DT_DEBUG. Such situation will not change
+ for this inferior - do not retry it. Report it to GDB as
+ E01, see for the reasons at the GDB solib-svr4.c side. */
+ if (priv->r_debug == (CORE_ADDR) -1)
+ return -1;
+
+ if (priv->r_debug != 0)
{
- if (pipe (linux_event_pipe) == -1)
- fatal ("creating event pipe failed.");
+ if (linux_read_memory (priv->r_debug + lmo->r_version_offset,
+ (unsigned char *) &r_version,
+ sizeof (r_version)) != 0
+ || r_version != 1)
+ {
+ warning ("unexpected r_debug version %d", r_version);
+ }
+ else if (read_one_ptr (priv->r_debug + lmo->r_map_offset,
+ &lm_addr, ptr_size) != 0)
+ {
+ warning ("unable to read r_map from 0x%lx",
+ (long) priv->r_debug + lmo->r_map_offset);
+ }
+ }
+ }
- fcntl (linux_event_pipe[0], F_SETFL, O_NONBLOCK);
- fcntl (linux_event_pipe[1], F_SETFL, O_NONBLOCK);
+ document = xmalloc (allocated);
+ strcpy (document, "<library-list-svr4 version=\"1.0\"");
+ p = document + strlen (document);
+
+ while (lm_addr
+ && read_one_ptr (lm_addr + lmo->l_name_offset,
+ &l_name, ptr_size) == 0
+ && read_one_ptr (lm_addr + lmo->l_addr_offset,
+ &l_addr, ptr_size) == 0
+ && read_one_ptr (lm_addr + lmo->l_ld_offset,
+ &l_ld, ptr_size) == 0
+ && read_one_ptr (lm_addr + lmo->l_prev_offset,
+ &l_prev, ptr_size) == 0
+ && read_one_ptr (lm_addr + lmo->l_next_offset,
+ &l_next, ptr_size) == 0)
+ {
+ unsigned char libname[PATH_MAX];
- /* Register the event loop handler. */
- add_file_handler (linux_event_pipe[0],
- handle_target_event, NULL);
+ if (lm_prev != l_prev)
+ {
+ warning ("Corrupted shared library list: 0x%lx != 0x%lx",
+ (long) lm_prev, (long) l_prev);
+ break;
+ }
- /* Always trigger a linux_wait. */
- async_file_mark ();
+ /* Ignore the first entry even if it has valid name as the first entry
+ corresponds to the main executable. The first entry should not be
+ skipped if the dynamic loader was loaded late by a static executable
+ (see solib-svr4.c parameter ignore_first). But in such case the main
+ executable does not have PT_DYNAMIC present and this function already
+ exited above due to failed get_r_debug. */
+ if (lm_prev == 0)
+ {
+ sprintf (p, " main-lm=\"0x%lx\"", (unsigned long) lm_addr);
+ p = p + strlen (p);
}
else
{
- delete_file_handler (linux_event_pipe[0]);
+ /* Not checking for error because reading may stop before
+ we've got PATH_MAX worth of characters. */
+ libname[0] = '\0';
+ linux_read_memory (l_name, libname, sizeof (libname) - 1);
+ libname[sizeof (libname) - 1] = '\0';
+ if (libname[0] != '\0')
+ {
+ /* 6x the size for xml_escape_text below. */
+ size_t len = 6 * strlen ((char *) libname);
+ char *name;
- close (linux_event_pipe[0]);
- close (linux_event_pipe[1]);
- linux_event_pipe[0] = -1;
- linux_event_pipe[1] = -1;
+ if (!header_done)
+ {
+ /* Terminate `<library-list-svr4'. */
+ *p++ = '>';
+ header_done = 1;
+ }
+
+ while (allocated < p - document + len + 200)
+ {
+ /* Expand to guarantee sufficient storage. */
+ uintptr_t document_len = p - document;
+
+ document = xrealloc (document, 2 * allocated);
+ allocated *= 2;
+ p = document + document_len;
+ }
+
+ name = xml_escape_text ((char *) libname);
+ p += sprintf (p, "<library name=\"%s\" lm=\"0x%lx\" "
+ "l_addr=\"0x%lx\" l_ld=\"0x%lx\"/>",
+ name, (unsigned long) lm_addr,
+ (unsigned long) l_addr, (unsigned long) l_ld);
+ free (name);
+ }
}
- sigprocmask (SIG_UNBLOCK, &mask, NULL);
+ lm_prev = lm_addr;
+ lm_addr = l_next;
}
- return previous;
-}
+ if (!header_done)
+ {
+ /* Empty list; terminate `<library-list-svr4'. */
+ strcpy (p, "/>");
+ }
+ else
+ strcpy (p, "</library-list-svr4>");
-static int
-linux_start_non_stop (int nonstop)
-{
- /* Register or unregister from event-loop accordingly. */
- linux_async (nonstop);
- return 0;
-}
+ document_len = strlen (document);
+ if (offset < document_len)
+ document_len -= offset;
+ else
+ document_len = 0;
+ if (len > document_len)
+ len = document_len;
-static int
-linux_supports_multi_process (void)
-{
- return 1;
+ memcpy (readbuf, document + offset, len);
+ xfree (document);
+
+ return len;
}
+#ifdef HAVE_LINUX_BTRACE
-/* Enumerate spufs IDs for process PID. */
-static int
-spu_enumerate_spu_ids (long pid, unsigned char *buf, CORE_ADDR offset, int len)
+/* See to_enable_btrace target method. */
+
+static struct btrace_target_info *
+linux_low_enable_btrace (ptid_t ptid, const struct btrace_config *conf)
{
- int pos = 0;
- int written = 0;
- char path[128];
- DIR *dir;
- struct dirent *entry;
+ struct btrace_target_info *tinfo;
- sprintf (path, "/proc/%ld/fd", pid);
- dir = opendir (path);
- if (!dir)
- return -1;
+ tinfo = linux_enable_btrace (ptid, conf);
- rewinddir (dir);
- while ((entry = readdir (dir)) != NULL)
+ if (tinfo != NULL && tinfo->ptr_bits == 0)
{
- struct stat st;
- struct statfs stfs;
- int fd;
+ struct thread_info *thread = find_thread_ptid (ptid);
+ struct regcache *regcache = get_thread_regcache (thread, 0);
- fd = atoi (entry->d_name);
- if (!fd)
- continue;
+ tinfo->ptr_bits = register_size (regcache->tdesc, 0) * 8;
+ }
- sprintf (path, "/proc/%ld/fd/%d", pid, fd);
- if (stat (path, &st) != 0)
- continue;
- if (!S_ISDIR (st.st_mode))
- continue;
+ return tinfo;
+}
- if (statfs (path, &stfs) != 0)
- continue;
- if (stfs.f_type != SPUFS_MAGIC)
- continue;
+/* See to_disable_btrace target method. */
- if (pos >= offset && pos + 4 <= offset + len)
- {
- *(unsigned int *)(buf + pos - offset) = fd;
- written += 4;
- }
- pos += 4;
- }
+static int
+linux_low_disable_btrace (struct btrace_target_info *tinfo)
+{
+ enum btrace_error err;
- closedir (dir);
- return written;
+ err = linux_disable_btrace (tinfo);
+ return (err == BTRACE_ERR_NONE ? 0 : -1);
}
-/* Implements the to_xfer_partial interface for the TARGET_OBJECT_SPU
- object type, using the /proc file system. */
+/* See to_read_btrace target method. */
+
static int
-linux_qxfer_spu (const char *annex, unsigned char *readbuf,
- unsigned const char *writebuf,
- CORE_ADDR offset, int len)
+linux_low_read_btrace (struct btrace_target_info *tinfo, struct buffer *buffer,
+ int type)
{
- long pid = lwpid_of (get_thread_lwp (current_inferior));
- char buf[128];
- int fd = 0;
- int ret = 0;
+ struct btrace_data btrace;
+ struct btrace_block *block;
+ enum btrace_error err;
+ int i;
- if (!writebuf && !readbuf)
- return -1;
+ btrace_data_init (&btrace);
- if (!*annex)
+ err = linux_read_btrace (&btrace, tinfo, type);
+ if (err != BTRACE_ERR_NONE)
{
- if (!readbuf)
- return -1;
+ if (err == BTRACE_ERR_OVERFLOW)
+ buffer_grow_str0 (buffer, "E.Overflow.");
else
- return spu_enumerate_spu_ids (pid, readbuf, offset, len);
- }
+ buffer_grow_str0 (buffer, "E.Generic Error.");
- sprintf (buf, "/proc/%ld/fd/%s", pid, annex);
- fd = open (buf, writebuf? O_WRONLY : O_RDONLY);
- if (fd <= 0)
- return -1;
+ btrace_data_fini (&btrace);
+ return -1;
+ }
- if (offset != 0
- && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
+ switch (btrace.format)
{
- close (fd);
- return 0;
- }
+ case BTRACE_FORMAT_NONE:
+ buffer_grow_str0 (buffer, "E.No Trace.");
+ break;
- if (writebuf)
- ret = write (fd, writebuf, (size_t) len);
- else
- ret = read (fd, readbuf, (size_t) len);
+ case BTRACE_FORMAT_BTS:
+ buffer_grow_str (buffer, "<!DOCTYPE btrace SYSTEM \"btrace.dtd\">\n");
+ buffer_grow_str (buffer, "<btrace version=\"1.0\">\n");
- close (fd);
- return ret;
+ for (i = 0;
+ VEC_iterate (btrace_block_s, btrace.variant.bts.blocks, i, block);
+ i++)
+ buffer_xml_printf (buffer, "<block begin=\"0x%s\" end=\"0x%s\"/>\n",
+ paddress (block->begin), paddress (block->end));
+
+ buffer_grow_str0 (buffer, "</btrace>\n");
+ break;
+
+ default:
+ buffer_grow_str0 (buffer, "E.Unknown Trace Format.");
+
+ btrace_data_fini (&btrace);
+ return -1;
+ }
+
+ btrace_data_fini (&btrace);
+ return 0;
}
+/* See to_btrace_conf target method. */
+
static int
-linux_core_of_thread (ptid_t ptid)
+linux_low_btrace_conf (const struct btrace_target_info *tinfo,
+ struct buffer *buffer)
{
- char filename[sizeof ("/proc//task//stat")
- + 2 * 20 /* decimal digits for 2 numbers, max 2^64 bit each */
- + 1];
- FILE *f;
- char *content = NULL;
- char *p;
- char *ts = 0;
- int content_read = 0;
- int i;
- int core;
+ const struct btrace_config *conf;
- sprintf (filename, "/proc/%d/task/%ld/stat",
- ptid_get_pid (ptid), ptid_get_lwp (ptid));
- f = fopen (filename, "r");
- if (!f)
- return -1;
+ buffer_grow_str (buffer, "<!DOCTYPE btrace-conf SYSTEM \"btrace-conf.dtd\">\n");
+ buffer_grow_str (buffer, "<btrace-conf version=\"1.0\">\n");
- for (;;)
+ conf = linux_btrace_conf (tinfo);
+ if (conf != NULL)
{
- int n;
- content = realloc (content, content_read + 1024);
- n = fread (content + content_read, 1, 1024, f);
- content_read += n;
- if (n < 1024)
+ switch (conf->format)
{
- content[content_read] = '\0';
+ case BTRACE_FORMAT_NONE:
+ break;
+
+ case BTRACE_FORMAT_BTS:
+ buffer_xml_printf (buffer, "<bts");
+ buffer_xml_printf (buffer, " size=\"0x%x\"", conf->bts.size);
+ buffer_xml_printf (buffer, " />\n");
break;
}
}
- p = strchr (content, '(');
- p = strchr (p, ')') + 2; /* skip ")" and a whitespace. */
-
- p = strtok_r (p, " ", &ts);
- for (i = 0; i != 36; ++i)
- p = strtok_r (NULL, " ", &ts);
-
- if (sscanf (p, "%d", &core) == 0)
- core = -1;
+ buffer_grow_str0 (buffer, "</btrace-conf>\n");
+ return 0;
+}
+#endif /* HAVE_LINUX_BTRACE */
- free (content);
- fclose (f);
+/* See nat/linux-nat.h. */
- return core;
+ptid_t
+current_lwp_ptid (void)
+{
+ return ptid_of (current_thread);
}
static struct target_ops linux_target_ops = {
linux_attach,
linux_kill,
linux_detach,
+ linux_mourn,
linux_join,
linux_thread_alive,
linux_resume,
linux_wait,
linux_fetch_registers,
linux_store_registers,
+ linux_prepare_to_access_memory,
+ linux_done_accessing_memory,
linux_read_memory,
linux_write_memory,
linux_look_up_symbols,
linux_request_interrupt,
linux_read_auxv,
+ linux_supports_z_point_type,
linux_insert_point,
linux_remove_point,
+ linux_stopped_by_sw_breakpoint,
+ linux_supports_stopped_by_sw_breakpoint,
+ linux_stopped_by_hw_breakpoint,
+ linux_supports_stopped_by_hw_breakpoint,
+ linux_supports_conditional_breakpoints,
linux_stopped_by_watchpoint,
linux_stopped_data_address,
-#if defined(__UCLIBC__) && defined(HAS_NOMMU)
+#if defined(__UCLIBC__) && defined(HAS_NOMMU) \
+ && defined(PT_TEXT_ADDR) && defined(PT_DATA_ADDR) \
+ && defined(PT_TEXT_END_ADDR)
linux_read_offsets,
#else
NULL,
linux_async,
linux_start_non_stop,
linux_supports_multi_process,
+ linux_supports_fork_events,
+ linux_supports_vfork_events,
+ linux_handle_new_gdb_connection,
#ifdef USE_THREAD_DB
thread_db_handle_monitor_command,
#else
NULL,
#endif
- linux_core_of_thread
+ linux_common_core_of_thread,
+ linux_read_loadmap,
+ linux_process_qsupported,
+ linux_supports_tracepoints,
+ linux_read_pc,
+ linux_write_pc,
+ linux_thread_stopped,
+ NULL,
+ linux_pause_all,
+ linux_unpause_all,
+ linux_stabilize_threads,
+ linux_install_fast_tracepoint_jump_pad,
+ linux_emit_ops,
+ linux_supports_disable_randomization,
+ linux_get_min_fast_tracepoint_insn_len,
+ linux_qxfer_libraries_svr4,
+ linux_supports_agent,
+#ifdef HAVE_LINUX_BTRACE
+ linux_supports_btrace,
+ linux_low_enable_btrace,
+ linux_low_disable_btrace,
+ linux_low_read_btrace,
+ linux_low_btrace_conf,
+#else
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+#endif
+ linux_supports_range_stepping,
+ linux_proc_pid_to_exec_file,
};
static void
{
/* FIXME drow/2002-06-09: As above, we should check with LinuxThreads
to find what the cancel signal actually is. */
-#ifdef __SIGRTMIN /* Bionic doesn't use SIGRTMIN the way glibc does. */
+#ifndef __ANDROID__ /* Bionic doesn't use SIGRTMIN the way glibc does. */
signal (__SIGRTMIN+1, SIG_IGN);
#endif
}
+#ifdef HAVE_LINUX_REGSETS
+void
+initialize_regsets_info (struct regsets_info *info)
+{
+ for (info->num_regsets = 0;
+ info->regsets[info->num_regsets].size >= 0;
+ info->num_regsets++)
+ ;
+}
+#endif
+
void
initialize_low (void)
{
set_breakpoint_data (the_low_target.breakpoint,
the_low_target.breakpoint_len);
linux_init_signals ();
- linux_test_for_tracefork ();
-#ifdef HAVE_LINUX_REGSETS
- for (num_regsets = 0; target_regsets[num_regsets].size >= 0; num_regsets++)
- ;
- disabled_regsets = xmalloc (num_regsets);
-#endif
+ linux_ptrace_init_warnings ();
sigchld_action.sa_handler = sigchld_handler;
sigemptyset (&sigchld_action.sa_mask);
sigchld_action.sa_flags = SA_RESTART;
sigaction (SIGCHLD, &sigchld_action, NULL);
+
+ initialize_low_arch ();
+
+ linux_check_ptrace_features ();
}
projects / deliverable / binutils-gdb.git / blobdiff