/* Remote utility routines for the remote server for GDB.
- Copyright (C) 1986-2014 Free Software Foundation, Inc.
+ Copyright (C) 1986-2017 Free Software Foundation, Inc.
This file is part of GDB.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "server.h"
-#include "terminal.h"
+#if HAVE_TERMIOS_H
+#include <termios.h>
+#endif
#include "target.h"
#include "gdbthread.h"
#include "tdesc.h"
#include "dll.h"
#include "rsp-low.h"
+#include "gdbthread.h"
#include <ctype.h>
#if HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#if HAVE_FCNTL_H
#include <fcntl.h>
#endif
-#include <sys/time.h>
+#include "gdb_sys_time.h"
#include <unistd.h>
#if HAVE_ARPA_INET_H
#include <arpa/inet.h>
NAME is the filename used for communication. */
void
-remote_prepare (char *name)
+remote_prepare (const char *name)
{
- char *port_str;
+ const char *port_str;
#ifdef USE_WIN32API
static int winsock_initialized;
#endif
NAME is the filename used for communication. */
void
-remote_open (char *name)
+remote_open (const char *name)
{
- char *port_str;
+ const char *port_str;
port_str = strchr (name, ':');
#ifdef USE_WIN32API
if (remote_desc < 0)
perror_with_name ("Could not open remote device");
-#ifdef HAVE_TERMIOS
+#if HAVE_TERMIOS_H
{
struct termios termios;
tcgetattr (remote_desc, &termios);
}
#endif
-#ifdef HAVE_TERMIO
- {
- struct termio termio;
- ioctl (remote_desc, TCGETA, &termio);
-
- termio.c_iflag = 0;
- termio.c_oflag = 0;
- termio.c_lflag = 0;
- termio.c_cflag &= ~(CSIZE | PARENB);
- termio.c_cflag |= CLOCAL | CS8;
- termio.c_cc[VMIN] = 1;
- termio.c_cc[VTIME] = 0;
-
- ioctl (remote_desc, TCSETA, &termio);
- }
-#endif
-
-#ifdef HAVE_SGTTY
- {
- struct sgttyb sg;
-
- ioctl (remote_desc, TIOCGETP, &sg);
- sg.sg_flags = RAW;
- ioctl (remote_desc, TIOCSETP, &sg);
- }
-#endif
-
fprintf (stderr, "Remote debugging using %s\n", name);
enable_async_notification (remote_desc);
{
delete_file_handler (remote_desc);
+#ifndef USE_WIN32API
+ /* Remove SIGIO handler. */
+ signal (SIGIO, SIG_IGN);
+#endif
+
#ifdef USE_WIN32API
closesocket (remote_desc);
#else
return buf;
}
-ULONGEST
-hex_or_minus_one (char *buf, char **obuf)
+static ULONGEST
+hex_or_minus_one (const char *buf, const char **obuf)
{
ULONGEST ret;
- if (strncmp (buf, "-1", 2) == 0)
+ if (startswith (buf, "-1"))
{
ret = (ULONGEST) -1;
buf += 2;
/* Extract a PTID from BUF. If non-null, OBUF is set to the to one
passed the last parsed char. Returns null_ptid on error. */
ptid_t
-read_ptid (char *buf, char **obuf)
+read_ptid (const char *buf, const char **obuf)
{
- char *p = buf;
- char *pp;
+ const char *p = buf;
+ const char *pp;
ULONGEST pid = 0, tid = 0;
if (*p == 'p')
/* No multi-process. Just a tid. */
tid = hex_or_minus_one (p, &pp);
- /* Since the stub is not sending a process id, then default to
- what's in the current inferior. */
- pid = ptid_get_pid (current_ptid);
+ /* Since GDB is not sending a process id (multi-process extensions
+ are off), then there's only one process. Default to the first in
+ the list. */
+ pid = pid_of (get_first_process ());
if (obuf)
*obuf = pp;
char *p;
int cc;
- buf2 = xmalloc (strlen ("$") + cnt + strlen ("#nn") + 1);
+ buf2 = (char *) xmalloc (strlen ("$") + cnt + strlen ("#nn") + 1);
/* Copy the packet into buffer BUF2, encapsulating it
and giving it a checksum. */
if (remote_debug)
{
if (is_notif)
- fprintf (stderr, "putpkt (\"%s\"); [notif]\n", buf2);
+ debug_printf ("putpkt (\"%s\"); [notif]\n", buf2);
else
- fprintf (stderr, "putpkt (\"%s\"); [noack mode]\n", buf2);
- fflush (stderr);
+ debug_printf ("putpkt (\"%s\"); [noack mode]\n", buf2);
+ debug_flush ();
}
break;
}
if (remote_debug)
{
- fprintf (stderr, "putpkt (\"%s\"); [looking for ack]\n", buf2);
- fflush (stderr);
+ debug_printf ("putpkt (\"%s\"); [looking for ack]\n", buf2);
+ debug_flush ();
}
cc = readchar ();
if (remote_debug)
{
- fprintf (stderr, "[received '%c' (0x%x)]\n", cc, cc);
- fflush (stderr);
+ debug_printf ("[received '%c' (0x%x)]\n", cc, cc);
+ debug_flush ();
}
/* Check for an input interrupt while we're here. */
fprintf (stderr, "client connection closed\n");
return;
}
- else if (cc != 1 || c != '\003' || current_thread == NULL)
+ else if (cc != 1 || c != '\003')
{
fprintf (stderr, "input_interrupt, count = %d c = %d ", cc, c);
if (isprint (c))
input_interrupt (0);
}
-/* Asynchronous I/O support. SIGIO must be enabled when waiting, in order to
- accept Control-C from the client, and must be disabled when talking to
- the client. */
+/* Asynchronous I/O support. SIGIO must be unblocked when waiting,
+ in order to accept Control-C from the client, and must be blocked
+ when talking to the client. */
static void
-unblock_async_io (void)
+block_unblock_async_io (int block)
{
#ifndef USE_WIN32API
sigset_t sigio_set;
sigemptyset (&sigio_set);
sigaddset (&sigio_set, SIGIO);
- sigprocmask (SIG_UNBLOCK, &sigio_set, NULL);
+ sigprocmask (block ? SIG_BLOCK : SIG_UNBLOCK, &sigio_set, NULL);
#endif
}
if (async_io_enabled)
return;
-#ifndef USE_WIN32API
- signal (SIGIO, input_interrupt);
-#endif
+ block_unblock_async_io (0);
+
async_io_enabled = 1;
#ifdef __QNX__
nto_comctrl (1);
if (!async_io_enabled)
return;
-#ifndef USE_WIN32API
- signal (SIGIO, SIG_IGN);
-#endif
+ block_unblock_async_io (1);
+
async_io_enabled = 0;
#ifdef __QNX__
nto_comctrl (0);
void
initialize_async_io (void)
{
- /* Make sure that async I/O starts disabled. */
+ /* Make sure that async I/O starts blocked. */
async_io_enabled = 1;
disable_async_io ();
- /* Make sure the signal is unblocked. */
- unblock_async_io ();
+ /* Install the signal handler. */
+#ifndef USE_WIN32API
+ signal (SIGIO, input_interrupt);
+#endif
}
/* Internal buffer used by readchar.
if (readchar_bufcnt <= 0)
{
if (readchar_bufcnt == 0)
- fprintf (stderr, "readchar: Got EOF\n");
+ {
+ if (remote_debug)
+ debug_printf ("readchar: Got EOF\n");
+ }
else
perror ("readchar");
while (1)
{
c = readchar ();
+
+ /* The '\003' may appear before or after each packet, so
+ check for an input interrupt. */
+ if (c == '\003')
+ {
+ (*the_target->request_interrupt) ();
+ continue;
+ }
+
if (c == '$')
break;
if (remote_debug)
{
- fprintf (stderr, "[getpkt: discarding char '%c']\n", c);
- fflush (stderr);
+ debug_printf ("[getpkt: discarding char '%c']\n", c);
+ debug_flush ();
}
if (c < 0)
{
if (remote_debug)
{
- fprintf (stderr, "getpkt (\"%s\"); [sending ack] \n", buf);
- fflush (stderr);
+ debug_printf ("getpkt (\"%s\"); [sending ack] \n", buf);
+ debug_flush ();
}
if (write_prim ("+", 1) != 1)
if (remote_debug)
{
- fprintf (stderr, "[sent ack]\n");
- fflush (stderr);
+ debug_printf ("[sent ack]\n");
+ debug_flush ();
}
}
else
{
if (remote_debug)
{
- fprintf (stderr, "getpkt (\"%s\"); [no ack sent] \n", buf);
- fflush (stderr);
+ debug_printf ("getpkt (\"%s\"); [no ack sent] \n", buf);
+ debug_flush ();
}
}
+ /* The readchar above may have already read a '\003' out of the socket
+ and moved it to the local buffer. For example, when GDB sends
+ vCont;c immediately followed by interrupt (see
+ gdb.base/interrupt-noterm.exp). As soon as we see the vCont;c, we'll
+ resume the inferior and wait. Since we've already moved the '\003'
+ to the local buffer, SIGIO won't help. In that case, if we don't
+ check for interrupt after the vCont;c packet, the interrupt character
+ would stay in the buffer unattended until after the next (unrelated)
+ stop. */
+ while (readchar_bufcnt > 0 && *readchar_bufp == '\003')
+ {
+ /* Consume the interrupt character in the buffer. */
+ readchar ();
+ (*the_target->request_interrupt) ();
+ }
+
return bp - buf;
}
return buf;
}
-void
-new_thread_notify (int id)
-{
- char own_buf[256];
-
- /* The `n' response is not yet part of the remote protocol. Do nothing. */
- if (1)
- return;
-
- if (server_waiting == 0)
- return;
-
- sprintf (own_buf, "n%x", id);
- disable_async_io ();
- putpkt (own_buf);
- enable_async_io ();
-}
-
-void
-dead_thread_notify (int id)
-{
- char own_buf[256];
-
- /* The `x' response is not yet part of the remote protocol. Do nothing. */
- if (1)
- return;
-
- sprintf (own_buf, "x%x", id);
- disable_async_io ();
- putpkt (own_buf);
- enable_async_io ();
-}
-
void
prepare_resume_reply (char *buf, ptid_t ptid,
struct target_waitstatus *status)
switch (status->kind)
{
case TARGET_WAITKIND_STOPPED:
+ case TARGET_WAITKIND_FORKED:
+ case TARGET_WAITKIND_VFORKED:
+ case TARGET_WAITKIND_VFORK_DONE:
+ case TARGET_WAITKIND_EXECD:
+ case TARGET_WAITKIND_THREAD_CREATED:
+ case TARGET_WAITKIND_SYSCALL_ENTRY:
+ case TARGET_WAITKIND_SYSCALL_RETURN:
{
struct thread_info *saved_thread;
const char **regp;
struct regcache *regcache;
- sprintf (buf, "T%02x", status->value.sig);
+ if ((status->kind == TARGET_WAITKIND_FORKED && report_fork_events)
+ || (status->kind == TARGET_WAITKIND_VFORKED && report_vfork_events))
+ {
+ enum gdb_signal signal = GDB_SIGNAL_TRAP;
+ const char *event = (status->kind == TARGET_WAITKIND_FORKED
+ ? "fork" : "vfork");
+
+ sprintf (buf, "T%02x%s:", signal, event);
+ buf += strlen (buf);
+ buf = write_ptid (buf, status->value.related_pid);
+ strcat (buf, ";");
+ }
+ else if (status->kind == TARGET_WAITKIND_VFORK_DONE && report_vfork_events)
+ {
+ enum gdb_signal signal = GDB_SIGNAL_TRAP;
+
+ sprintf (buf, "T%02xvforkdone:;", signal);
+ }
+ else if (status->kind == TARGET_WAITKIND_EXECD && report_exec_events)
+ {
+ enum gdb_signal signal = GDB_SIGNAL_TRAP;
+ const char *event = "exec";
+ char hexified_pathname[PATH_MAX * 2];
+
+ sprintf (buf, "T%02x%s:", signal, event);
+ buf += strlen (buf);
+
+ /* Encode pathname to hexified format. */
+ bin2hex ((const gdb_byte *) status->value.execd_pathname,
+ hexified_pathname,
+ strlen (status->value.execd_pathname));
+
+ sprintf (buf, "%s;", hexified_pathname);
+ xfree (status->value.execd_pathname);
+ status->value.execd_pathname = NULL;
+ buf += strlen (buf);
+ }
+ else if (status->kind == TARGET_WAITKIND_THREAD_CREATED
+ && report_thread_events)
+ {
+ enum gdb_signal signal = GDB_SIGNAL_TRAP;
+
+ sprintf (buf, "T%02xcreate:;", signal);
+ }
+ else if (status->kind == TARGET_WAITKIND_SYSCALL_ENTRY
+ || status->kind == TARGET_WAITKIND_SYSCALL_RETURN)
+ {
+ enum gdb_signal signal = GDB_SIGNAL_TRAP;
+ const char *event = (status->kind == TARGET_WAITKIND_SYSCALL_ENTRY
+ ? "syscall_entry" : "syscall_return");
+
+ sprintf (buf, "T%02x%s:%x;", signal, event,
+ status->value.syscall_number);
+ }
+ else
+ sprintf (buf, "T%02x", status->value.sig);
+
buf += strlen (buf);
saved_thread = current_thread;
- current_thread = find_thread_ptid (ptid);
+ switch_to_thread (ptid);
regp = current_target_desc ()->expedite_regs;
*buf++ = tohex ((addr >> (i - 1) * 4) & 0xf);
*buf++ = ';';
}
+ else if (swbreak_feature && target_stopped_by_sw_breakpoint ())
+ {
+ sprintf (buf, "swbreak:;");
+ buf += strlen (buf);
+ }
+ else if (hwbreak_feature && target_stopped_by_hw_breakpoint ())
+ {
+ sprintf (buf, "hwbreak:;");
+ buf += strlen (buf);
+ }
while (*regp)
{
else
sprintf (buf, "X%02x", status->value.sig);
break;
+ case TARGET_WAITKIND_THREAD_EXITED:
+ sprintf (buf, "w%x;", status->value.integer);
+ buf += strlen (buf);
+ buf = write_ptid (buf, ptid);
+ break;
+ case TARGET_WAITKIND_NO_RESUMED:
+ sprintf (buf, "N");
+ break;
default:
error ("unhandled waitkind");
break;
}
if (*to_p == NULL)
- *to_p = xmalloc (*len_ptr);
+ *to_p = (unsigned char *) xmalloc (*len_ptr);
hex2bin (&from[i++], *to_p, *len_ptr);
}
}
if (*to_p == NULL)
- *to_p = xmalloc (*len_ptr);
+ *to_p = (unsigned char *) xmalloc (*len_ptr);
if (remote_unescape_input ((const gdb_byte *) &from[i], packet_len - i,
*to_p, *len_ptr) != *len_ptr)
int
look_up_one_symbol (const char *name, CORE_ADDR *addrp, int may_ask_gdb)
{
- char own_buf[266], *p, *q;
+ char *p, *q;
int len;
struct sym_cache *sym;
struct process_info *proc;
/* We ought to handle pretty much any packet at this point while we
wait for the qSymbol "response". That requires re-entering the
main loop. For now, this is an adequate approximation; allow
- GDB to read from memory while it figures out the address of the
- symbol. */
- while (own_buf[0] == 'm')
+ GDB to read from memory and handle 'v' packets (for vFile transfers)
+ while it figures out the address of the symbol. */
+ while (1)
{
- CORE_ADDR mem_addr;
- unsigned char *mem_buf;
- unsigned int mem_len;
+ if (own_buf[0] == 'm')
+ {
+ CORE_ADDR mem_addr;
+ unsigned char *mem_buf;
+ unsigned int mem_len;
- decode_m_packet (&own_buf[1], &mem_addr, &mem_len);
- mem_buf = xmalloc (mem_len);
- if (read_inferior_memory (mem_addr, mem_buf, mem_len) == 0)
- bin2hex (mem_buf, own_buf, mem_len);
+ decode_m_packet (&own_buf[1], &mem_addr, &mem_len);
+ mem_buf = (unsigned char *) xmalloc (mem_len);
+ if (read_inferior_memory (mem_addr, mem_buf, mem_len) == 0)
+ bin2hex (mem_buf, own_buf, mem_len);
+ else
+ write_enn (own_buf);
+ free (mem_buf);
+ if (putpkt (own_buf) < 0)
+ return -1;
+ }
+ else if (own_buf[0] == 'v')
+ {
+ int new_len = -1;
+ handle_v_requests (own_buf, len, &new_len);
+ if (new_len != -1)
+ putpkt_binary (own_buf, new_len);
+ else
+ putpkt (own_buf);
+ }
else
- write_enn (own_buf);
- free (mem_buf);
- if (putpkt (own_buf) < 0)
- return -1;
+ break;
len = getpkt (own_buf);
if (len < 0)
return -1;
}
- if (strncmp (own_buf, "qSymbol:", strlen ("qSymbol:")) != 0)
+ if (!startswith (own_buf, "qSymbol:"))
{
warning ("Malformed response to qSymbol, ignoring: %s\n", own_buf);
return -1;
decode_address (addrp, p, q - p);
/* Save the symbol in our cache. */
- sym = xmalloc (sizeof (*sym));
+ sym = XNEW (struct sym_cache);
sym->name = xstrdup (name);
sym->addr = *addrp;
sym->next = proc->symbol_cache;
int
relocate_instruction (CORE_ADDR *to, CORE_ADDR oldloc)
{
- char own_buf[266];
int len;
ULONGEST written = 0;
/* Send the request. */
- strcpy (own_buf, "qRelocInsn:");
sprintf (own_buf, "qRelocInsn:%s;%s", paddress (oldloc),
paddress (*to));
if (putpkt (own_buf) < 0)
if (own_buf[0] == 'm')
{
decode_m_packet (&own_buf[1], &mem_addr, &mem_len);
- mem_buf = xmalloc (mem_len);
+ mem_buf = (unsigned char *) xmalloc (mem_len);
if (read_inferior_memory (mem_addr, mem_buf, mem_len) == 0)
bin2hex (mem_buf, own_buf, mem_len);
else
return -1;
}
- if (strncmp (own_buf, "qRelocInsn:", strlen ("qRelocInsn:")) != 0)
+ if (!startswith (own_buf, "qRelocInsn:"))
{
warning ("Malformed response to qRelocInsn, ignoring: %s\n",
own_buf);
monitor_output (const char *msg)
{
int len = strlen (msg);
- char *buf = xmalloc (len * 2 + 2);
+ char *buf = (char *) xmalloc (len * 2 + 2);
buf[0] = 'O';
bin2hex ((const gdb_byte *) msg, buf + 1, len);