/* Main code for remote server for GDB.
Copyright (C) 1989, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2002, 2003,
- 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
#include <malloc.h>
#endif
-unsigned long cont_thread;
-unsigned long general_thread;
-unsigned long step_thread;
-unsigned long thread_from_wait;
-unsigned long old_thread_from_wait;
+ptid_t cont_thread;
+ptid_t general_thread;
+ptid_t step_thread;
+
int server_waiting;
static int extended_protocol;
-static int attached;
static int response_needed;
static int exit_requested;
+int multi_process;
+int non_stop;
+
static char **program_argv, **wrapper_argv;
/* Enable miscellaneous debugging output. The name is historical - it
was originally used to debug LinuxThreads support. */
int debug_threads;
+/* Enable debugging of h/w breakpoint/watchpoint support. */
+int debug_hw_points;
+
int pass_signals[TARGET_SIGNAL_LAST];
jmp_buf toplevel;
int disable_packet_qC;
int disable_packet_qfThreadInfo;
+/* Last status reported to GDB. */
+static struct target_waitstatus last_status;
+static ptid_t last_ptid;
+
+static char *own_buf;
+static unsigned char *mem_buf;
+
+/* Structure holding information relative to a single stop reply. We
+ keep a queue of these (really a singly-linked list) to push to GDB
+ in non-stop mode. */
+struct vstop_notif
+{
+ /* Pointer to next in list. */
+ struct vstop_notif *next;
+
+ /* Thread or process that got the event. */
+ ptid_t ptid;
+
+ /* Event info. */
+ struct target_waitstatus status;
+};
+
+/* The pending stop replies list head. */
+static struct vstop_notif *notif_queue = NULL;
+
+/* Put a stop reply to the stop reply queue. */
+
+static void
+queue_stop_reply (ptid_t ptid, struct target_waitstatus *status)
+{
+ struct vstop_notif *new_notif;
+
+ new_notif = malloc (sizeof (*new_notif));
+ new_notif->next = NULL;
+ new_notif->ptid = ptid;
+ new_notif->status = *status;
+
+ if (notif_queue)
+ {
+ struct vstop_notif *tail;
+ for (tail = notif_queue;
+ tail && tail->next;
+ tail = tail->next)
+ ;
+ tail->next = new_notif;
+ }
+ else
+ notif_queue = new_notif;
+
+ if (remote_debug)
+ {
+ int i = 0;
+ struct vstop_notif *n;
+
+ for (n = notif_queue; n; n = n->next)
+ i++;
+
+ fprintf (stderr, "pending stop replies: %d\n", i);
+ }
+}
+
+/* Place an event in the stop reply queue, and push a notification if
+ we aren't sending one yet. */
+
+void
+push_event (ptid_t ptid, struct target_waitstatus *status)
+{
+ gdb_assert (status->kind != TARGET_WAITKIND_IGNORE);
+
+ queue_stop_reply (ptid, status);
+
+ /* If this is the first stop reply in the queue, then inform GDB
+ about it, by sending a Stop notification. */
+ if (notif_queue->next == NULL)
+ {
+ char *p = own_buf;
+ strcpy (p, "Stop:");
+ p += strlen (p);
+ prepare_resume_reply (p,
+ notif_queue->ptid, ¬if_queue->status);
+ putpkt_notif (own_buf);
+ }
+}
+
+/* Get rid of the currently pending stop replies for PID. If PID is
+ -1, then apply to all processes. */
+
+static void
+discard_queued_stop_replies (int pid)
+{
+ struct vstop_notif *prev = NULL, *reply, *next;
+
+ for (reply = notif_queue; reply; reply = next)
+ {
+ next = reply->next;
+
+ if (pid == -1
+ || ptid_get_pid (reply->ptid) == pid)
+ {
+ if (reply == notif_queue)
+ notif_queue = next;
+ else
+ prev->next = reply->next;
+
+ free (reply);
+ }
+ else
+ prev = reply;
+ }
+}
+
+/* If there are more stop replies to push, push one now. */
+
+static void
+send_next_stop_reply (char *own_buf)
+{
+ if (notif_queue)
+ prepare_resume_reply (own_buf,
+ notif_queue->ptid,
+ ¬if_queue->status);
+ else
+ write_ok (own_buf);
+}
+
static int
target_running (void)
{
}
static int
-start_inferior (char **argv, char *statusptr)
+start_inferior (char **argv)
{
char **new_argv = argv;
- attached = 0;
if (wrapper_argv != NULL)
{
new_argv[count] = NULL;
}
+ if (debug_threads)
+ {
+ int i;
+ for (i = 0; new_argv[i]; ++i)
+ fprintf (stderr, "new_argv[%d] = \"%s\"\n", i, new_argv[i]);
+ fflush (stderr);
+ }
+
#ifdef SIGTTOU
signal (SIGTTOU, SIG_DFL);
signal (SIGTTIN, SIG_DFL);
if (wrapper_argv != NULL)
{
struct thread_resume resume_info;
- int sig;
+ ptid_t ptid;
- resume_info.thread = -1;
- resume_info.step = 0;
+ resume_info.thread = pid_to_ptid (signal_pid);
+ resume_info.kind = resume_continue;
resume_info.sig = 0;
- resume_info.leave_stopped = 0;
- sig = mywait (statusptr, 0);
- if (*statusptr != 'T')
- return sig;
+ ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);
+
+ if (last_status.kind != TARGET_WAITKIND_STOPPED)
+ return signal_pid;
do
{
- (*the_target->resume) (&resume_info);
+ (*the_target->resume) (&resume_info, 1);
- sig = mywait (statusptr, 0);
- if (*statusptr != 'T')
- return sig;
+ mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);
+ if (last_status.kind != TARGET_WAITKIND_STOPPED)
+ return signal_pid;
+
+ current_inferior->last_resume_kind = resume_stop;
+ current_inferior->last_status = last_status;
}
- while (sig != TARGET_SIGNAL_TRAP);
+ while (last_status.value.sig != TARGET_SIGNAL_TRAP);
+
+ current_inferior->last_resume_kind = resume_stop;
+ current_inferior->last_status = last_status;
+ return signal_pid;
+ }
+
+ /* Wait till we are at 1st instruction in program, return new pid
+ (assuming success). */
+ last_ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);
- return sig;
+ if (last_status.kind != TARGET_WAITKIND_EXITED
+ && last_status.kind != TARGET_WAITKIND_SIGNALLED)
+ {
+ current_inferior->last_resume_kind = resume_stop;
+ current_inferior->last_status = last_status;
}
- /* Wait till we are at 1st instruction in program, return signal
- number (assuming success). */
- return mywait (statusptr, 0);
+ return signal_pid;
}
static int
-attach_inferior (int pid, char *statusptr, int *sigptr)
+attach_inferior (int pid)
{
/* myattach should return -1 if attaching is unsupported,
0 if it succeeded, and call error() otherwise. */
if (myattach (pid) != 0)
return -1;
- attached = 1;
-
fprintf (stderr, "Attached; pid = %d\n", pid);
fflush (stderr);
whichever we were told to attach to. */
signal_pid = pid;
- *sigptr = mywait (statusptr, 0);
+ if (!non_stop)
+ {
+ last_ptid = mywait (pid_to_ptid (pid), &last_status, 0, 0);
+
+ /* GDB knows to ignore the first SIGSTOP after attaching to a running
+ process using the "attach" command, but this is different; it's
+ just using "target remote". Pretend it's just starting up. */
+ if (last_status.kind == TARGET_WAITKIND_STOPPED
+ && last_status.value.sig == TARGET_SIGNAL_STOP)
+ last_status.value.sig = TARGET_SIGNAL_TRAP;
- /* GDB knows to ignore the first SIGSTOP after attaching to a running
- process using the "attach" command, but this is different; it's
- just using "target remote". Pretend it's just starting up. */
- if (*statusptr == 'T' && *sigptr == TARGET_SIGNAL_STOP)
- *sigptr = TARGET_SIGNAL_TRAP;
+ current_inferior->last_resume_kind = resume_stop;
+ current_inferior->last_status = last_status;
+ }
return 0;
}
}
/* Handle all of the extended 'Q' packets. */
-void
+
+static void
handle_general_set (char *own_buf)
{
if (strncmp ("QPassSignals:", own_buf, strlen ("QPassSignals:")) == 0)
return;
}
+ if (strncmp (own_buf, "QNonStop:", 9) == 0)
+ {
+ char *mode = own_buf + 9;
+ int req = -1;
+ char *req_str;
+
+ if (strcmp (mode, "0") == 0)
+ req = 0;
+ else if (strcmp (mode, "1") == 0)
+ req = 1;
+ else
+ {
+ /* We don't know what this mode is, so complain to
+ GDB. */
+ fprintf (stderr, "Unknown non-stop mode requested: %s\n",
+ own_buf);
+ write_enn (own_buf);
+ return;
+ }
+
+ req_str = req ? "non-stop" : "all-stop";
+ if (start_non_stop (req) != 0)
+ {
+ fprintf (stderr, "Setting %s mode failed\n", req_str);
+ write_enn (own_buf);
+ return;
+ }
+
+ non_stop = req;
+
+ if (remote_debug)
+ fprintf (stderr, "[%s mode enabled]\n", req_str);
+
+ write_ok (own_buf);
+ return;
+ }
+
+ if (target_supports_tracepoints ()
+ && handle_tracepoint_general_set (own_buf))
+ return;
+
/* Otherwise we didn't know what packet it was. Say we didn't
understand it. */
own_buf[0] = 0;
{
monitor_output ("The following monitor commands are supported:\n");
monitor_output (" set debug <0|1>\n");
- monitor_output (" Enable general debugging messages\n");
+ monitor_output (" Enable general debugging messages\n");
+ monitor_output (" set debug-hw-points <0|1>\n");
+ monitor_output (" Enable h/w breakpoint/watchpoint debugging messages\n");
monitor_output (" set remote-debug <0|1>\n");
monitor_output (" Enable remote protocol debugging messages\n");
monitor_output (" exit\n");
monitor_output (" Quit GDBserver\n");
}
+/* Read trace frame or inferior memory. */
+
+static int
+gdb_read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
+{
+ int ret;
+
+ if (current_traceframe >= 0)
+ {
+ ULONGEST nbytes;
+ ULONGEST length = len;
+
+ if (traceframe_read_mem (current_traceframe,
+ memaddr, myaddr, len, &nbytes))
+ return EIO;
+ /* Data read from trace buffer, we're done. */
+ if (nbytes == length)
+ return 0;
+ if (!in_readonly_region (memaddr, length))
+ return EIO;
+ /* Otherwise we have a valid readonly case, fall through. */
+ /* (assume no half-trace half-real blocks for now) */
+ }
+
+ ret = prepare_to_access_memory ();
+ if (ret == 0)
+ {
+ ret = read_inferior_memory (memaddr, myaddr, len);
+ done_accessing_memory ();
+ }
+
+ return ret;
+}
+
+/* Write trace frame or inferior memory. Actually, writing to trace
+ frames is forbidden. */
+
+static int
+gdb_write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len)
+{
+ if (current_traceframe >= 0)
+ return EIO;
+ else
+ {
+ int ret;
+
+ ret = prepare_to_access_memory ();
+ if (ret == 0)
+ {
+ ret = write_inferior_memory (memaddr, myaddr, len);
+ done_accessing_memory ();
+ }
+ return ret;
+ }
+}
+
/* Subroutine of handle_search_memory to simplify it. */
static int
{
/* Prime the search buffer. */
- if (read_inferior_memory (start_addr, search_buf, search_buf_size) != 0)
+ if (gdb_read_memory (start_addr, search_buf, search_buf_size) != 0)
{
warning ("Unable to access target memory at 0x%lx, halting search.",
(long) start_addr);
if (search_space_len >= pattern_len)
{
unsigned keep_len = search_buf_size - chunk_size;
- CORE_ADDR read_addr = start_addr + keep_len;
+ CORE_ADDR read_addr = start_addr + chunk_size + keep_len;
int nr_to_read;
/* Copy the trailing part of the previous iteration to the front
? search_space_len - keep_len
: chunk_size);
- if (read_inferior_memory (read_addr, search_buf + keep_len,
- nr_to_read) != 0)
+ if (gdb_read_memory (read_addr, search_buf + keep_len,
+ nr_to_read) != 0)
{
warning ("Unable to access target memory at 0x%lx, halting search.",
(long) read_addr);
return; \
}
+/* Handle monitor commands not handled by target-specific handlers. */
+
+static void
+handle_monitor_command (char *mon)
+{
+ if (strcmp (mon, "set debug 1") == 0)
+ {
+ debug_threads = 1;
+ monitor_output ("Debug output enabled.\n");
+ }
+ else if (strcmp (mon, "set debug 0") == 0)
+ {
+ debug_threads = 0;
+ monitor_output ("Debug output disabled.\n");
+ }
+ else if (strcmp (mon, "set debug-hw-points 1") == 0)
+ {
+ debug_hw_points = 1;
+ monitor_output ("H/W point debugging output enabled.\n");
+ }
+ else if (strcmp (mon, "set debug-hw-points 0") == 0)
+ {
+ debug_hw_points = 0;
+ monitor_output ("H/W point debugging output disabled.\n");
+ }
+ else if (strcmp (mon, "set remote-debug 1") == 0)
+ {
+ remote_debug = 1;
+ monitor_output ("Protocol debug output enabled.\n");
+ }
+ else if (strcmp (mon, "set remote-debug 0") == 0)
+ {
+ remote_debug = 0;
+ monitor_output ("Protocol debug output disabled.\n");
+ }
+ else if (strcmp (mon, "help") == 0)
+ monitor_show_help ();
+ else if (strcmp (mon, "exit") == 0)
+ exit_requested = 1;
+ else
+ {
+ monitor_output ("Unknown monitor command.\n\n");
+ monitor_show_help ();
+ write_enn (own_buf);
+ }
+}
+
+static void
+handle_threads_qxfer_proper (struct buffer *buffer)
+{
+ struct inferior_list_entry *thread;
+
+ buffer_grow_str (buffer, "<threads>\n");
+
+ for (thread = all_threads.head; thread; thread = thread->next)
+ {
+ ptid_t ptid = thread_to_gdb_id ((struct thread_info *)thread);
+ char ptid_s[100];
+ int core = -1;
+ char core_s[21];
+
+ write_ptid (ptid_s, ptid);
+
+ if (the_target->core_of_thread)
+ core = (*the_target->core_of_thread) (ptid);
+
+ if (core != -1)
+ {
+ sprintf (core_s, "%d", core);
+ buffer_xml_printf (buffer, "<thread id=\"%s\" core=\"%s\"/>\n",
+ ptid_s, core_s);
+ }
+ else
+ {
+ buffer_xml_printf (buffer, "<thread id=\"%s\"/>\n",
+ ptid_s);
+ }
+ }
+
+ buffer_grow_str0 (buffer, "</threads>\n");
+}
+
+static int
+handle_threads_qxfer (const char *annex,
+ unsigned char *readbuf,
+ CORE_ADDR offset, int length)
+{
+ static char *result = 0;
+ static unsigned int result_length = 0;
+
+ if (annex && strcmp (annex, "") != 0)
+ return 0;
+
+ if (offset == 0)
+ {
+ struct buffer buffer;
+ /* When asked for data at offset 0, generate everything and store into
+ 'result'. Successive reads will be served off 'result'. */
+ if (result)
+ free (result);
+
+ buffer_init (&buffer);
+
+ handle_threads_qxfer_proper (&buffer);
+
+ result = buffer_finish (&buffer);
+ result_length = strlen (result);
+ buffer_free (&buffer);
+ }
+
+ if (offset >= result_length)
+ {
+ /* We're out of data. */
+ free (result);
+ result = NULL;
+ result_length = 0;
+ return 0;
+ }
+
+ if (length > result_length - offset)
+ length = result_length - offset;
+
+ memcpy (readbuf, result + offset, length);
+
+ return length;
+
+}
+
+/* Table used by the crc32 function to calcuate the checksum. */
+
+static unsigned int crc32_table[256] =
+{0, 0};
+
+/* Compute 32 bit CRC from inferior memory.
+
+ On success, return 32 bit CRC.
+ On failure, return (unsigned long long) -1. */
+
+static unsigned long long
+crc32 (CORE_ADDR base, int len, unsigned int crc)
+{
+ if (!crc32_table[1])
+ {
+ /* Initialize the CRC table and the decoding table. */
+ int i, j;
+ unsigned int c;
+
+ for (i = 0; i < 256; i++)
+ {
+ for (c = i << 24, j = 8; j > 0; --j)
+ c = c & 0x80000000 ? (c << 1) ^ 0x04c11db7 : (c << 1);
+ crc32_table[i] = c;
+ }
+ }
+
+ while (len--)
+ {
+ unsigned char byte = 0;
+
+ /* Return failure if memory read fails. */
+ if (read_inferior_memory (base, &byte, 1) != 0)
+ return (unsigned long long) -1;
+
+ crc = (crc << 8) ^ crc32_table[((crc >> 24) ^ byte) & 255];
+ base++;
+ }
+ return (unsigned long long) crc;
+}
+
/* Handle all of the extended 'q' packets. */
void
handle_query (char *own_buf, int packet_len, int *new_packet_len_p)
/* Reply the current thread id. */
if (strcmp ("qC", own_buf) == 0 && !disable_packet_qC)
{
+ ptid_t gdb_id;
require_running (own_buf);
- thread_ptr = all_threads.head;
- sprintf (own_buf, "QC%x",
- thread_to_gdb_id ((struct thread_info *)thread_ptr));
+
+ if (!ptid_equal (general_thread, null_ptid)
+ && !ptid_equal (general_thread, minus_one_ptid))
+ gdb_id = general_thread;
+ else
+ {
+ thread_ptr = all_threads.head;
+ gdb_id = thread_to_gdb_id ((struct thread_info *)thread_ptr);
+ }
+
+ sprintf (own_buf, "QC");
+ own_buf += 2;
+ own_buf = write_ptid (own_buf, gdb_id);
return;
}
if (strcmp ("qSymbol::", own_buf) == 0)
{
+ /* GDB is suggesting new symbols have been loaded. This may
+ mean a new shared library has been detected as loaded, so
+ take the opportunity to check if breakpoints we think are
+ inserted, still are. Note that it isn't guaranteed that
+ we'll see this when a shared library is loaded, and nor will
+ we see this for unloads (although breakpoints in unloaded
+ libraries shouldn't trigger), as GDB may not find symbols for
+ the library at all. We also re-validate breakpoints when we
+ see a second GDB breakpoint for the same address, and or when
+ we access breakpoint shadows. */
+ validate_breakpoints ();
+
+ if (target_supports_tracepoints ())
+ tracepoint_look_up_symbols ();
+
if (target_running () && the_target->look_up_symbols != NULL)
(*the_target->look_up_symbols) ();
{
if (strcmp ("qfThreadInfo", own_buf) == 0)
{
+ ptid_t gdb_id;
+
require_running (own_buf);
thread_ptr = all_threads.head;
- sprintf (own_buf, "m%x", thread_to_gdb_id ((struct thread_info *)thread_ptr));
+
+ *own_buf++ = 'm';
+ gdb_id = thread_to_gdb_id ((struct thread_info *)thread_ptr);
+ write_ptid (own_buf, gdb_id);
thread_ptr = thread_ptr->next;
return;
}
if (strcmp ("qsThreadInfo", own_buf) == 0)
{
+ ptid_t gdb_id;
+
require_running (own_buf);
if (thread_ptr != NULL)
{
- sprintf (own_buf, "m%x", thread_to_gdb_id ((struct thread_info *)thread_ptr));
+ *own_buf++ = 'm';
+ gdb_id = thread_to_gdb_id ((struct thread_info *)thread_ptr);
+ write_ptid (own_buf, gdb_id);
thread_ptr = thread_ptr->next;
return;
}
(long)text, (long)data, (long)data);
else
write_enn (own_buf);
-
+
return;
}
require_running (own_buf);
strcpy (own_buf, "E00");
if (decode_xfer_read (own_buf + 15, &annex, &ofs, &len) < 0)
- return;
+ return;
if (len > PBUFSIZ - 2)
len = PBUFSIZ - 2;
spu_buf = malloc (len + 1);
if (!spu_buf)
- return;
+ return;
n = (*the_target->qxfer_spu) (annex, spu_buf, NULL, ofs, len + 1);
- if (n < 0)
+ if (n < 0)
write_enn (own_buf);
else if (n > len)
- *new_packet_len_p = write_qxfer_response
- (own_buf, spu_buf, len, 1);
- else
- *new_packet_len_p = write_qxfer_response
- (own_buf, spu_buf, n, 0);
+ *new_packet_len_p = write_qxfer_response (own_buf, spu_buf, len, 1);
+ else
+ *new_packet_len_p = write_qxfer_response (own_buf, spu_buf, n, 0);
free (spu_buf);
return;
strcpy (own_buf, "E00");
spu_buf = malloc (packet_len - 15);
if (!spu_buf)
- return;
+ return;
if (decode_xfer_write (own_buf + 16, packet_len - 16, &annex,
&ofs, &len, spu_buf) < 0)
{
return;
}
- n = (*the_target->qxfer_spu)
+ n = (*the_target->qxfer_spu)
(annex, NULL, (unsigned const char *)spu_buf, ofs, len);
if (n < 0)
write_enn (own_buf);
strcpy (own_buf, "E00");
if (decode_xfer_read (own_buf + 18, &annex, &ofs, &len) < 0)
- return;
+ return;
if (len > PBUFSIZ - 2)
- len = PBUFSIZ - 2;
+ len = PBUFSIZ - 2;
workbuf = malloc (len + 1);
if (!workbuf)
- return;
+ return;
n = (*the_target->qxfer_osdata) (annex, workbuf, NULL, ofs, len + 1);
if (n < 0)
- write_enn (own_buf);
+ write_enn (own_buf);
else if (n > len)
- *new_packet_len_p = write_qxfer_response
- (own_buf, workbuf, len, 1);
+ *new_packet_len_p = write_qxfer_response (own_buf, workbuf, len, 1);
else
- *new_packet_len_p = write_qxfer_response
- (own_buf, workbuf, n, 0);
+ *new_packet_len_p = write_qxfer_response (own_buf, workbuf, n, 0);
free (workbuf);
return;
}
- /* Protocol features query. */
- if (strncmp ("qSupported", own_buf, 10) == 0
- && (own_buf[10] == ':' || own_buf[10] == '\0'))
+ if (the_target->qxfer_siginfo != NULL
+ && strncmp ("qXfer:siginfo:read:", own_buf, 19) == 0)
{
- sprintf (own_buf, "PacketSize=%x;QPassSignals+", PBUFSIZ - 1);
-
- /* We do not have any hook to indicate whether the target backend
- supports qXfer:libraries:read, so always report it. */
- strcat (own_buf, ";qXfer:libraries:read+");
-
- if (the_target->read_auxv != NULL)
- strcat (own_buf, ";qXfer:auxv:read+");
-
- if (the_target->qxfer_spu != NULL)
- strcat (own_buf, ";qXfer:spu:read+;qXfer:spu:write+");
+ unsigned char *data;
+ int n;
+ CORE_ADDR ofs;
+ unsigned int len;
+ char *annex;
- /* We always report qXfer:features:read, as targets may
- install XML files on a subsequent call to arch_setup.
- If we reported to GDB on startup that we don't support
- qXfer:feature:read at all, we will never be re-queried. */
- strcat (own_buf, ";qXfer:features:read+");
+ require_running (own_buf);
- if (transport_is_reliable)
- strcat (own_buf, ";QStartNoAckMode+");
+ /* Reject any annex; grab the offset and length. */
+ if (decode_xfer_read (own_buf + 19, &annex, &ofs, &len) < 0
+ || annex[0] != '\0')
+ {
+ strcpy (own_buf, "E00");
+ return;
+ }
- if (the_target->qxfer_osdata != NULL)
- strcat (own_buf, ";qXfer:osdata:read+");
+ /* Read one extra byte, as an indicator of whether there is
+ more. */
+ if (len > PBUFSIZ - 2)
+ len = PBUFSIZ - 2;
+ data = malloc (len + 1);
+ if (!data)
+ return;
+ n = (*the_target->qxfer_siginfo) (annex, data, NULL, ofs, len + 1);
+ if (n < 0)
+ write_enn (own_buf);
+ else if (n > len)
+ *new_packet_len_p = write_qxfer_response (own_buf, data, len, 1);
+ else
+ *new_packet_len_p = write_qxfer_response (own_buf, data, n, 0);
+ free (data);
return;
}
- /* Thread-local storage support. */
- if (the_target->get_tls_address != NULL
- && strncmp ("qGetTLSAddr:", own_buf, 12) == 0)
+ if (the_target->qxfer_siginfo != NULL
+ && strncmp ("qXfer:siginfo:write:", own_buf, 20) == 0)
{
- char *p = own_buf + 12;
- CORE_ADDR parts[3], address = 0;
- int i, err;
-
+ char *annex;
+ int n;
+ unsigned int len;
+ CORE_ADDR ofs;
+ unsigned char *data;
+
+ require_running (own_buf);
+
+ strcpy (own_buf, "E00");
+ data = malloc (packet_len - 19);
+ if (!data)
+ return;
+ if (decode_xfer_write (own_buf + 20, packet_len - 20, &annex,
+ &ofs, &len, data) < 0)
+ {
+ free (data);
+ return;
+ }
+
+ n = (*the_target->qxfer_siginfo)
+ (annex, NULL, (unsigned const char *)data, ofs, len);
+ if (n < 0)
+ write_enn (own_buf);
+ else
+ sprintf (own_buf, "%x", n);
+
+ free (data);
+ return;
+ }
+
+ if (strncmp ("qXfer:threads:read:", own_buf, 19) == 0)
+ {
+ unsigned char *data;
+ int n;
+ CORE_ADDR ofs;
+ unsigned int len;
+ char *annex;
+
+ require_running (own_buf);
+
+ /* Reject any annex; grab the offset and length. */
+ if (decode_xfer_read (own_buf + 19, &annex, &ofs, &len) < 0
+ || annex[0] != '\0')
+ {
+ strcpy (own_buf, "E00");
+ return;
+ }
+
+ /* Read one extra byte, as an indicator of whether there is
+ more. */
+ if (len > PBUFSIZ - 2)
+ len = PBUFSIZ - 2;
+ data = malloc (len + 1);
+ if (!data)
+ return;
+ n = handle_threads_qxfer (annex, data, ofs, len + 1);
+ if (n < 0)
+ write_enn (own_buf);
+ else if (n > len)
+ *new_packet_len_p = write_qxfer_response (own_buf, data, len, 1);
+ else
+ *new_packet_len_p = write_qxfer_response (own_buf, data, n, 0);
+
+ free (data);
+ return;
+ }
+
+ if (strncmp ("qXfer:statictrace:read:", own_buf,
+ sizeof ("qXfer:statictrace:read:") -1) == 0)
+ {
+ unsigned char *data;
+ CORE_ADDR ofs;
+ unsigned int len;
+ char *annex;
+ ULONGEST nbytes;
+
+ require_running (own_buf);
+
+ if (current_traceframe == -1)
+ {
+ write_enn (own_buf);
+ return;
+ }
+
+ /* Reject any annex; grab the offset and length. */
+ if (decode_xfer_read (own_buf + sizeof ("qXfer:statictrace:read:") -1,
+ &annex, &ofs, &len) < 0
+ || annex[0] != '\0')
+ {
+ strcpy (own_buf, "E00");
+ return;
+ }
+
+ /* Read one extra byte, as an indicator of whether there is
+ more. */
+ if (len > PBUFSIZ - 2)
+ len = PBUFSIZ - 2;
+ data = malloc (len + 1);
+ if (!data)
+ return;
+
+ if (traceframe_read_sdata (current_traceframe, ofs,
+ data, len + 1, &nbytes))
+ write_enn (own_buf);
+ else if (nbytes > len)
+ *new_packet_len_p = write_qxfer_response (own_buf, data, len, 1);
+ else
+ *new_packet_len_p = write_qxfer_response (own_buf, data, nbytes, 0);
+
+ free (data);
+ return;
+ }
+
+ /* Protocol features query. */
+ if (strncmp ("qSupported", own_buf, 10) == 0
+ && (own_buf[10] == ':' || own_buf[10] == '\0'))
+ {
+ char *p = &own_buf[10];
+ int gdb_supports_qRelocInsn = 0;
+
+ /* Start processing qSupported packet. */
+ target_process_qsupported (NULL);
+
+ /* Process each feature being provided by GDB. The first
+ feature will follow a ':', and latter features will follow
+ ';'. */
+ if (*p == ':')
+ {
+ char **qsupported = NULL;
+ int count = 0;
+ int i;
+
+ /* Two passes, to avoid nested strtok calls in
+ target_process_qsupported. */
+ for (p = strtok (p + 1, ";");
+ p != NULL;
+ p = strtok (NULL, ";"))
+ {
+ count++;
+ qsupported = xrealloc (qsupported, count * sizeof (char *));
+ qsupported[count - 1] = xstrdup (p);
+ }
+
+ for (i = 0; i < count; i++)
+ {
+ p = qsupported[i];
+ if (strcmp (p, "multiprocess+") == 0)
+ {
+ /* GDB supports and wants multi-process support if
+ possible. */
+ if (target_supports_multi_process ())
+ multi_process = 1;
+ }
+ else if (strcmp (p, "qRelocInsn+") == 0)
+ {
+ /* GDB supports relocate instruction requests. */
+ gdb_supports_qRelocInsn = 1;
+ }
+ else
+ target_process_qsupported (p);
+
+ free (p);
+ }
+
+ free (qsupported);
+ }
+
+ sprintf (own_buf, "PacketSize=%x;QPassSignals+", PBUFSIZ - 1);
+
+ /* We do not have any hook to indicate whether the target backend
+ supports qXfer:libraries:read, so always report it. */
+ strcat (own_buf, ";qXfer:libraries:read+");
+
+ if (the_target->read_auxv != NULL)
+ strcat (own_buf, ";qXfer:auxv:read+");
+
+ if (the_target->qxfer_spu != NULL)
+ strcat (own_buf, ";qXfer:spu:read+;qXfer:spu:write+");
+
+ if (the_target->qxfer_siginfo != NULL)
+ strcat (own_buf, ";qXfer:siginfo:read+;qXfer:siginfo:write+");
+
+ /* We always report qXfer:features:read, as targets may
+ install XML files on a subsequent call to arch_setup.
+ If we reported to GDB on startup that we don't support
+ qXfer:feature:read at all, we will never be re-queried. */
+ strcat (own_buf, ";qXfer:features:read+");
+
+ if (transport_is_reliable)
+ strcat (own_buf, ";QStartNoAckMode+");
+
+ if (the_target->qxfer_osdata != NULL)
+ strcat (own_buf, ";qXfer:osdata:read+");
+
+ if (target_supports_multi_process ())
+ strcat (own_buf, ";multiprocess+");
+
+ if (target_supports_non_stop ())
+ strcat (own_buf, ";QNonStop+");
+
+ strcat (own_buf, ";qXfer:threads:read+");
+
+ if (target_supports_tracepoints ())
+ {
+ strcat (own_buf, ";ConditionalTracepoints+");
+ strcat (own_buf, ";TraceStateVariables+");
+ strcat (own_buf, ";TracepointSource+");
+ strcat (own_buf, ";DisconnectedTracing+");
+ if (gdb_supports_qRelocInsn && target_supports_fast_tracepoints ())
+ strcat (own_buf, ";FastTracepoints+");
+ strcat (own_buf, ";StaticTracepoints+");
+ strcat (own_buf, ";qXfer:statictrace:read+");
+ }
+
+ return;
+ }
+
+ /* Thread-local storage support. */
+ if (the_target->get_tls_address != NULL
+ && strncmp ("qGetTLSAddr:", own_buf, 12) == 0)
+ {
+ char *p = own_buf + 12;
+ CORE_ADDR parts[2], address = 0;
+ int i, err;
+ ptid_t ptid = null_ptid;
+
require_running (own_buf);
for (i = 0; i < 3; i++)
p2 = NULL;
}
- decode_address (&parts[i], p, len);
+ if (i == 0)
+ ptid = read_ptid (p, NULL);
+ else
+ decode_address (&parts[i - 1], p, len);
p = p2;
}
err = 1;
else
{
- struct thread_info *thread = gdb_id_to_thread (parts[0]);
+ struct thread_info *thread = find_thread_ptid (ptid);
if (thread == NULL)
err = 2;
else
- err = the_target->get_tls_address (thread, parts[1], parts[2],
+ err = the_target->get_tls_address (thread, parts[0], parts[1],
&address);
}
if (err == 0)
{
- sprintf (own_buf, "%llx", address);
+ strcpy (own_buf, paddress(address));
return;
}
else if (err > 0)
/* Otherwise, pretend we do not understand this packet. */
}
+ /* Windows OS Thread Information Block address support. */
+ if (the_target->get_tib_address != NULL
+ && strncmp ("qGetTIBAddr:", own_buf, 12) == 0)
+ {
+ char *annex;
+ int n;
+ CORE_ADDR tlb;
+ ptid_t ptid = read_ptid (own_buf + 12, &annex);
+
+ n = (*the_target->get_tib_address) (ptid, &tlb);
+ if (n == 1)
+ {
+ strcpy (own_buf, paddress(tlb));
+ return;
+ }
+ else if (n == 0)
+ {
+ write_enn (own_buf);
+ return;
+ }
+ return;
+ }
+
/* Handle "monitor" commands. */
if (strncmp ("qRcmd,", own_buf, 6) == 0)
{
write_ok (own_buf);
- if (strcmp (mon, "set debug 1") == 0)
- {
- debug_threads = 1;
- monitor_output ("Debug output enabled.\n");
- }
- else if (strcmp (mon, "set debug 0") == 0)
- {
- debug_threads = 0;
- monitor_output ("Debug output disabled.\n");
- }
- else if (strcmp (mon, "set remote-debug 1") == 0)
+ if (the_target->handle_monitor_command == NULL
+ || (*the_target->handle_monitor_command) (mon) == 0)
+ /* Default processing. */
+ handle_monitor_command (mon);
+
+ free (mon);
+ return;
+ }
+
+ if (strncmp ("qSearch:memory:", own_buf, sizeof ("qSearch:memory:") - 1) == 0)
+ {
+ require_running (own_buf);
+ handle_search_memory (own_buf, packet_len);
+ return;
+ }
+
+ if (strcmp (own_buf, "qAttached") == 0
+ || strncmp (own_buf, "qAttached:", sizeof ("qAttached:") - 1) == 0)
+ {
+ struct process_info *process;
+
+ if (own_buf[sizeof ("qAttached") - 1])
{
- remote_debug = 1;
- monitor_output ("Protocol debug output enabled.\n");
+ int pid = strtoul (own_buf + sizeof ("qAttached:") - 1, NULL, 16);
+ process = (struct process_info *)
+ find_inferior_id (&all_processes, pid_to_ptid (pid));
}
- else if (strcmp (mon, "set remote-debug 0") == 0)
+ else
{
- remote_debug = 0;
- monitor_output ("Protocol debug output disabled.\n");
+ require_running (own_buf);
+ process = current_process ();
}
- else if (strcmp (mon, "help") == 0)
- monitor_show_help ();
- else if (strcmp (mon, "exit") == 0)
- exit_requested = 1;
- else
+
+ if (process == NULL)
{
- monitor_output ("Unknown monitor command.\n\n");
- monitor_show_help ();
write_enn (own_buf);
+ return;
}
- free (mon);
+ strcpy (own_buf, process->attached ? "1" : "0");
return;
}
- if (strncmp ("qSearch:memory:", own_buf, sizeof ("qSearch:memory:") - 1) == 0)
+ if (strncmp ("qCRC:", own_buf, 5) == 0)
{
+ /* CRC check (compare-section). */
+ char *comma;
+ CORE_ADDR base;
+ int len;
+ unsigned long long crc;
+
require_running (own_buf);
- handle_search_memory (own_buf, packet_len);
+ base = strtoul (own_buf + 5, &comma, 16);
+ if (*comma++ != ',')
+ {
+ write_enn (own_buf);
+ return;
+ }
+ len = strtoul (comma, NULL, 16);
+ crc = crc32 (base, len, 0xffffffff);
+ /* Check for memory failure. */
+ if (crc == (unsigned long long) -1)
+ {
+ write_enn (own_buf);
+ return;
+ }
+ sprintf (own_buf, "C%lx", (unsigned long) crc);
return;
}
+ if (target_supports_tracepoints () && handle_tracepoint_query (own_buf))
+ return;
+
/* Otherwise we didn't know what packet it was. Say we didn't
understand it. */
own_buf[0] = 0;
}
+static void gdb_wants_all_threads_stopped (void);
+
/* Parse vCont packets. */
void
-handle_v_cont (char *own_buf, char *status, int *signal)
+handle_v_cont (char *own_buf)
{
char *p, *q;
int n = 0, i = 0;
- struct thread_resume *resume_info, default_action;
+ struct thread_resume *resume_info;
+ struct thread_resume default_action = {{0}};
/* Count the number of semicolons in the packet. There should be one
for every action. */
p++;
p = strchr (p, ';');
}
- /* Allocate room for one extra action, for the default remain-stopped
- behavior; if no default action is in the list, we'll need the extra
- slot. */
- resume_info = malloc ((n + 1) * sizeof (resume_info[0]));
+
+ resume_info = malloc (n * sizeof (resume_info[0]));
if (resume_info == NULL)
goto err;
- default_action.thread = -1;
- default_action.leave_stopped = 1;
- default_action.step = 0;
- default_action.sig = 0;
-
p = &own_buf[5];
- i = 0;
while (*p)
{
p++;
- resume_info[i].leave_stopped = 0;
-
if (p[0] == 's' || p[0] == 'S')
- resume_info[i].step = 1;
+ resume_info[i].kind = resume_step;
else if (p[0] == 'c' || p[0] == 'C')
- resume_info[i].step = 0;
+ resume_info[i].kind = resume_continue;
+ else if (p[0] == 't')
+ resume_info[i].kind = resume_stop;
else
goto err;
if (p[0] == 0)
{
- resume_info[i].thread = -1;
+ resume_info[i].thread = minus_one_ptid;
default_action = resume_info[i];
/* Note: we don't increment i here, we'll overwrite this entry
}
else if (p[0] == ':')
{
- unsigned int gdb_id = strtoul (p + 1, &q, 16);
- unsigned long thread_id;
+ ptid_t ptid = read_ptid (p + 1, &q);
if (p == q)
goto err;
if (p[0] != ';' && p[0] != 0)
goto err;
- thread_id = gdb_id_to_thread_id (gdb_id);
- if (thread_id)
- resume_info[i].thread = thread_id;
- else
- goto err;
+ resume_info[i].thread = ptid;
i++;
}
}
- resume_info[i] = default_action;
+ if (i < n)
+ resume_info[i] = default_action;
/* Still used in occasional places in the backend. */
- if (n == 1 && resume_info[0].thread != -1)
+ if (n == 1
+ && !ptid_equal (resume_info[0].thread, minus_one_ptid)
+ && resume_info[0].kind != resume_stop)
cont_thread = resume_info[0].thread;
else
- cont_thread = -1;
+ cont_thread = minus_one_ptid;
set_desired_inferior (0);
- enable_async_io ();
- (*the_target->resume) (resume_info);
+ if (!non_stop)
+ enable_async_io ();
+
+ (*the_target->resume) (resume_info, n);
free (resume_info);
- *signal = mywait (status, 1);
- prepare_resume_reply (own_buf, *status, *signal);
- disable_async_io ();
+ if (non_stop)
+ write_ok (own_buf);
+ else
+ {
+ last_ptid = mywait (minus_one_ptid, &last_status, 0, 1);
+
+ if (last_status.kind != TARGET_WAITKIND_EXITED
+ && last_status.kind != TARGET_WAITKIND_SIGNALLED)
+ current_inferior->last_status = last_status;
+
+ /* From the client's perspective, all-stop mode always stops all
+ threads implicitly (and the target backend has already done
+ so by now). Tag all threads as "want-stopped", so we don't
+ resume them implicitly without the client telling us to. */
+ gdb_wants_all_threads_stopped ();
+ prepare_resume_reply (own_buf, last_ptid, &last_status);
+ disable_async_io ();
+
+ if (last_status.kind == TARGET_WAITKIND_EXITED
+ || last_status.kind == TARGET_WAITKIND_SIGNALLED)
+ mourn_inferior (find_process_pid (ptid_get_pid (last_ptid)));
+ }
return;
err:
/* Attach to a new program. Return 1 if successful, 0 if failure. */
int
-handle_v_attach (char *own_buf, char *status, int *signal)
+handle_v_attach (char *own_buf)
{
int pid;
pid = strtol (own_buf + 8, NULL, 16);
- if (pid != 0 && attach_inferior (pid, status, signal) == 0)
+ if (pid != 0 && attach_inferior (pid) == 0)
{
/* Don't report shared library events after attaching, even if
some libraries are preloaded. GDB will always poll the
library list. Avoids the "stopped by shared library event"
notice on the GDB side. */
dlls_changed = 0;
- prepare_resume_reply (own_buf, *status, *signal);
+
+ if (non_stop)
+ {
+ /* In non-stop, we don't send a resume reply. Stop events
+ will follow up using the normal notification
+ mechanism. */
+ write_ok (own_buf);
+ }
+ else
+ prepare_resume_reply (own_buf, last_ptid, &last_status);
+
return 1;
}
else
/* Run a new program. Return 1 if successful, 0 if failure. */
static int
-handle_v_run (char *own_buf, char *status, int *signal)
+handle_v_run (char *own_buf)
{
char *p, *next_p, **new_argv;
int i, new_argc;
/* FIXME: new_argv memory leak */
write_enn (own_buf);
return 0;
- }
+ }
}
/* Free the old argv and install the new one. */
freeargv (program_argv);
program_argv = new_argv;
- *signal = start_inferior (program_argv, status);
- if (*status == 'T')
+ start_inferior (program_argv);
+ if (last_status.kind == TARGET_WAITKIND_STOPPED)
+ {
+ prepare_resume_reply (own_buf, last_ptid, &last_status);
+
+ /* In non-stop, sending a resume reply doesn't set the general
+ thread, but GDB assumes a vRun sets it (this is so GDB can
+ query which is the main thread of the new inferior. */
+ if (non_stop)
+ general_thread = last_ptid;
+
+ return 1;
+ }
+ else
+ {
+ write_enn (own_buf);
+ return 0;
+ }
+}
+
+/* Kill process. Return 1 if successful, 0 if failure. */
+int
+handle_v_kill (char *own_buf)
+{
+ int pid;
+ char *p = &own_buf[6];
+ if (multi_process)
+ pid = strtol (p, NULL, 16);
+ else
+ pid = signal_pid;
+ if (pid != 0 && kill_inferior (pid) == 0)
{
- prepare_resume_reply (own_buf, *status, *signal);
+ last_status.kind = TARGET_WAITKIND_SIGNALLED;
+ last_status.value.sig = TARGET_SIGNAL_KILL;
+ last_ptid = pid_to_ptid (pid);
+ discard_queued_stop_replies (pid);
+ write_ok (own_buf);
return 1;
}
else
}
}
+/* Handle a 'vStopped' packet. */
+static void
+handle_v_stopped (char *own_buf)
+{
+ /* If we're waiting for GDB to acknowledge a pending stop reply,
+ consider that done. */
+ if (notif_queue)
+ {
+ struct vstop_notif *head;
+
+ if (remote_debug)
+ fprintf (stderr, "vStopped: acking %s\n",
+ target_pid_to_str (notif_queue->ptid));
+
+ head = notif_queue;
+ notif_queue = notif_queue->next;
+ free (head);
+ }
+
+ /* Push another stop reply, or if there are no more left, an OK. */
+ send_next_stop_reply (own_buf);
+}
+
/* Handle all of the extended 'v' packets. */
void
-handle_v_requests (char *own_buf, char *status, int *signal,
- int packet_len, int *new_packet_len)
+handle_v_requests (char *own_buf, int packet_len, int *new_packet_len)
{
if (!disable_packet_vCont)
{
if (strncmp (own_buf, "vCont;", 6) == 0)
{
require_running (own_buf);
- handle_v_cont (own_buf, status, signal);
+ handle_v_cont (own_buf);
return;
}
if (strncmp (own_buf, "vCont?", 6) == 0)
{
- strcpy (own_buf, "vCont;c;C;s;S");
+ strcpy (own_buf, "vCont;c;C;s;S;t");
return;
}
}
if (strncmp (own_buf, "vAttach;", 8) == 0)
{
- if (target_running ())
+ if (!multi_process && target_running ())
{
fprintf (stderr, "Already debugging a process\n");
write_enn (own_buf);
return;
}
- handle_v_attach (own_buf, status, signal);
+ handle_v_attach (own_buf);
return;
}
if (strncmp (own_buf, "vRun;", 5) == 0)
{
- if (target_running ())
+ if (!multi_process && target_running ())
{
fprintf (stderr, "Already debugging a process\n");
write_enn (own_buf);
return;
}
- handle_v_run (own_buf, status, signal);
+ handle_v_run (own_buf);
return;
}
- /* Otherwise we didn't know what packet it was. Say we didn't
- understand it. */
- own_buf[0] = 0;
- return;
-}
-
-void
-myresume (char *own_buf, int step, int *signalp, char *statusp)
-{
+ if (strncmp (own_buf, "vKill;", 6) == 0)
+ {
+ if (!target_running ())
+ {
+ fprintf (stderr, "No process to kill\n");
+ write_enn (own_buf);
+ return;
+ }
+ handle_v_kill (own_buf);
+ return;
+ }
+
+ if (strncmp (own_buf, "vStopped", 8) == 0)
+ {
+ handle_v_stopped (own_buf);
+ return;
+ }
+
+ /* Otherwise we didn't know what packet it was. Say we didn't
+ understand it. */
+ own_buf[0] = 0;
+ return;
+}
+
+/* Resume inferior and wait for another event. In non-stop mode,
+ don't really wait here, but return immediatelly to the event
+ loop. */
+static void
+myresume (char *own_buf, int step, int sig)
+{
struct thread_resume resume_info[2];
int n = 0;
- int sig = *signalp;
+ int valid_cont_thread;
set_desired_inferior (0);
- if (step || sig || (cont_thread != 0 && cont_thread != -1))
+ valid_cont_thread = (!ptid_equal (cont_thread, null_ptid)
+ && !ptid_equal (cont_thread, minus_one_ptid));
+
+ if (step || sig || valid_cont_thread)
{
resume_info[0].thread
= ((struct inferior_list_entry *) current_inferior)->id;
- resume_info[0].step = step;
+ if (step)
+ resume_info[0].kind = resume_step;
+ else
+ resume_info[0].kind = resume_continue;
resume_info[0].sig = sig;
- resume_info[0].leave_stopped = 0;
n++;
}
- resume_info[n].thread = -1;
- resume_info[n].step = 0;
- resume_info[n].sig = 0;
- resume_info[n].leave_stopped = (cont_thread != 0 && cont_thread != -1);
- enable_async_io ();
- (*the_target->resume) (resume_info);
- *signalp = mywait (statusp, 1);
- prepare_resume_reply (own_buf, *statusp, *signalp);
- disable_async_io ();
+ if (!valid_cont_thread)
+ {
+ resume_info[n].thread = minus_one_ptid;
+ resume_info[n].kind = resume_continue;
+ resume_info[n].sig = 0;
+ n++;
+ }
+
+ if (!non_stop)
+ enable_async_io ();
+
+ (*the_target->resume) (resume_info, n);
+
+ if (non_stop)
+ write_ok (own_buf);
+ else
+ {
+ last_ptid = mywait (minus_one_ptid, &last_status, 0, 1);
+
+ if (last_status.kind != TARGET_WAITKIND_EXITED
+ && last_status.kind != TARGET_WAITKIND_SIGNALLED)
+ {
+ current_inferior->last_resume_kind = resume_stop;
+ current_inferior->last_status = last_status;
+ }
+
+ prepare_resume_reply (own_buf, last_ptid, &last_status);
+ disable_async_io ();
+
+ if (last_status.kind == TARGET_WAITKIND_EXITED
+ || last_status.kind == TARGET_WAITKIND_SIGNALLED)
+ mourn_inferior (find_process_pid (ptid_get_pid (last_ptid)));
+ }
+}
+
+/* Callback for for_each_inferior. Make a new stop reply for each
+ stopped thread. */
+
+static int
+queue_stop_reply_callback (struct inferior_list_entry *entry, void *arg)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+
+ /* For now, assume targets that don't have this callback also don't
+ manage the thread's last_status field. */
+ if (the_target->thread_stopped == NULL)
+ {
+ struct target_waitstatus status;
+
+ status.kind = TARGET_WAITKIND_STOPPED;
+ status.value.sig = TARGET_SIGNAL_TRAP;
+
+ /* Pass the last stop reply back to GDB, but don't notify
+ yet. */
+ queue_stop_reply (entry->id, &thread->last_status);
+ }
+ else
+ {
+ if (thread_stopped (thread))
+ {
+ if (debug_threads)
+ fprintf (stderr, "Reporting thread %s as already stopped with %s\n",
+ target_pid_to_str (entry->id),
+ target_waitstatus_to_string (&thread->last_status));
+
+ gdb_assert (thread->last_status.kind != TARGET_WAITKIND_IGNORE);
+
+ /* Pass the last stop reply back to GDB, but don't notify
+ yet. */
+ queue_stop_reply (entry->id, &thread->last_status);
+ }
+ }
+
+ return 0;
+}
+
+/* Set this inferior threads's state as "want-stopped". We won't
+ resume this thread until the client gives us another action for
+ it. */
+
+static void
+gdb_wants_thread_stopped (struct inferior_list_entry *entry)
+{
+ struct thread_info *thread = (struct thread_info *) entry;
+
+ thread->last_resume_kind = resume_stop;
+
+ if (thread->last_status.kind == TARGET_WAITKIND_IGNORE)
+ {
+ /* Most threads are stopped implicitly (all-stop); tag that with
+ signal 0. */
+ thread->last_status.kind = TARGET_WAITKIND_STOPPED;
+ thread->last_status.value.sig = TARGET_SIGNAL_0;
+ }
+}
+
+/* Set all threads' states as "want-stopped". */
+
+static void
+gdb_wants_all_threads_stopped (void)
+{
+ for_each_inferior (&all_threads, gdb_wants_thread_stopped);
+}
+
+/* Clear the gdb_detached flag of every process. */
+
+static void
+gdb_reattached_process (struct inferior_list_entry *entry)
+{
+ struct process_info *process = (struct process_info *) entry;
+
+ process->gdb_detached = 0;
+}
+
+/* Status handler for the '?' packet. */
+
+static void
+handle_status (char *own_buf)
+{
+ /* GDB is connected, don't forward events to the target anymore. */
+ for_each_inferior (&all_processes, gdb_reattached_process);
+
+ /* In non-stop mode, we must send a stop reply for each stopped
+ thread. In all-stop mode, just send one for the first stopped
+ thread we find. */
+
+ if (non_stop)
+ {
+ discard_queued_stop_replies (-1);
+ find_inferior (&all_threads, queue_stop_reply_callback, NULL);
+
+ /* The first is sent immediatly. OK is sent if there is no
+ stopped thread, which is the same handling of the vStopped
+ packet (by design). */
+ send_next_stop_reply (own_buf);
+ }
+ else
+ {
+ pause_all (0);
+ stabilize_threads ();
+ gdb_wants_all_threads_stopped ();
+
+ if (all_threads.head)
+ {
+ struct target_waitstatus status;
+
+ status.kind = TARGET_WAITKIND_STOPPED;
+ status.value.sig = TARGET_SIGNAL_TRAP;
+ prepare_resume_reply (own_buf,
+ all_threads.head->id, &status);
+ }
+ else
+ strcpy (own_buf, "W00");
+ }
}
static void
gdbserver_version (void)
{
printf ("GNU gdbserver %s%s\n"
- "Copyright (C) 2009 Free Software Foundation, Inc.\n"
+ "Copyright (C) 2010 Free Software Foundation, Inc.\n"
"gdbserver is free software, covered by the GNU General Public License.\n"
"This gdbserver was configured as \"%s\"\n",
PKGVERSION, version, host_name);
"HOST:PORT to listen for a TCP connection.\n"
"\n"
"Options:\n"
- " --debug\t\tEnable debugging output.\n"
- " --version\t\tDisplay version information and exit.\n"
- " --wrapper WRAPPER --\tRun WRAPPER to start new programs.\n");
+ " --debug Enable general debugging output.\n"
+ " --remote-debug Enable remote protocol debugging output.\n"
+ " --version Display version information and exit.\n"
+ " --wrapper WRAPPER -- Run WRAPPER to start new programs.\n");
if (REPORT_BUGS_TO[0] && stream == stdout)
fprintf (stream, "Report bugs to \"%s\".\n", REPORT_BUGS_TO);
}
break; \
}
+static int
+first_thread_of (struct inferior_list_entry *entry, void *args)
+{
+ int pid = * (int *) args;
+
+ if (ptid_get_pid (entry->id) == pid)
+ return 1;
+
+ return 0;
+}
+
+static void
+kill_inferior_callback (struct inferior_list_entry *entry)
+{
+ struct process_info *process = (struct process_info *) entry;
+ int pid = ptid_get_pid (process->head.id);
+
+ kill_inferior (pid);
+ discard_queued_stop_replies (pid);
+}
+
+/* Callback for for_each_inferior to detach or kill the inferior,
+ depending on whether we attached to it or not.
+ We inform the user whether we're detaching or killing the process
+ as this is only called when gdbserver is about to exit. */
+
+static void
+detach_or_kill_inferior_callback (struct inferior_list_entry *entry)
+{
+ struct process_info *process = (struct process_info *) entry;
+ int pid = ptid_get_pid (process->head.id);
+
+ if (process->attached)
+ detach_inferior (pid);
+ else
+ kill_inferior (pid);
+
+ discard_queued_stop_replies (pid);
+}
+
+/* for_each_inferior callback for detach_or_kill_for_exit to print
+ the pids of started inferiors. */
+
+static void
+print_started_pid (struct inferior_list_entry *entry)
+{
+ struct process_info *process = (struct process_info *) entry;
+
+ if (! process->attached)
+ {
+ int pid = ptid_get_pid (process->head.id);
+ fprintf (stderr, " %d", pid);
+ }
+}
+
+/* for_each_inferior callback for detach_or_kill_for_exit to print
+ the pids of attached inferiors. */
+
+static void
+print_attached_pid (struct inferior_list_entry *entry)
+{
+ struct process_info *process = (struct process_info *) entry;
+
+ if (process->attached)
+ {
+ int pid = ptid_get_pid (process->head.id);
+ fprintf (stderr, " %d", pid);
+ }
+}
+
+/* Call this when exiting gdbserver with possible inferiors that need
+ to be killed or detached from. */
+
+static void
+detach_or_kill_for_exit (void)
+{
+ /* First print a list of the inferiors we will be killing/detaching.
+ This is to assist the user, for example, in case the inferior unexpectedly
+ dies after we exit: did we screw up or did the inferior exit on its own?
+ Having this info will save some head-scratching. */
+
+ if (have_started_inferiors_p ())
+ {
+ fprintf (stderr, "Killing process(es):");
+ for_each_inferior (&all_processes, print_started_pid);
+ fprintf (stderr, "\n");
+ }
+ if (have_attached_inferiors_p ())
+ {
+ fprintf (stderr, "Detaching process(es):");
+ for_each_inferior (&all_processes, print_attached_pid);
+ fprintf (stderr, "\n");
+ }
+
+ /* Now we can kill or detach the inferiors. */
+
+ for_each_inferior (&all_processes, detach_or_kill_inferior_callback);
+}
+
+static void
+join_inferiors_callback (struct inferior_list_entry *entry)
+{
+ struct process_info *process = (struct process_info *) entry;
+
+ /* If we are attached, then we can exit. Otherwise, we need to hang
+ around doing nothing, until the child is gone. */
+ if (!process->attached)
+ join_inferior (ptid_get_pid (process->head.id));
+}
+
int
main (int argc, char *argv[])
{
- char ch, status, *own_buf;
- unsigned char *mem_buf;
- int i = 0;
- int signal;
- unsigned int len;
- CORE_ADDR mem_addr;
int bad_attach;
int pid;
char *arg_end, *port;
}
else if (strcmp (*next_arg, "--debug") == 0)
debug_threads = 1;
+ else if (strcmp (*next_arg, "--remote-debug") == 0)
+ remote_debug = 1;
else if (strcmp (*next_arg, "--disable-packet") == 0)
{
gdbserver_show_disableable (stdout);
exit (1);
}
+ initialize_inferiors ();
initialize_async_io ();
initialize_low ();
+ if (target_supports_tracepoints ())
+ initialize_tracepoint ();
own_buf = xmalloc (PBUFSIZ + 1);
mem_buf = xmalloc (PBUFSIZ);
program_argv[i] = NULL;
/* Wait till we are at first instruction in program. */
- signal = start_inferior (program_argv, &status);
+ start_inferior (program_argv);
/* We are now (hopefully) stopped at the first instruction of
the target process. This assumes that the target process was
}
else if (pid != 0)
{
- if (attach_inferior (pid, &status, &signal) == -1)
+ if (attach_inferior (pid) == -1)
error ("Attaching not supported on this target");
/* Otherwise succeeded. */
}
else
{
- status = 'W';
- signal = 0;
+ last_status.kind = TARGET_WAITKIND_EXITED;
+ last_status.value.integer = 0;
+ last_ptid = minus_one_ptid;
}
/* Don't report shared library events on the initial connection,
if (setjmp (toplevel))
{
- fprintf (stderr, "Killing inferior\n");
- kill_inferior ();
+ detach_or_kill_for_exit ();
exit (1);
}
- if (status == 'W' || status == 'X')
+ if (last_status.kind == TARGET_WAITKIND_EXITED
+ || last_status.kind == TARGET_WAITKIND_SIGNALLED)
was_running = 0;
else
was_running = 1;
while (1)
{
noack_mode = 0;
+ multi_process = 0;
+ /* Be sure we're out of tfind mode. */
+ current_traceframe = -1;
+
remote_open (port);
- restart:
if (setjmp (toplevel) != 0)
{
/* An error occurred. */
}
}
- disable_async_io ();
- while (!exit_requested)
+ /* Wait for events. This will return when all event sources are
+ removed from the event loop. */
+ start_event_loop ();
+
+ /* If an exit was requested (using the "monitor exit" command),
+ terminate now. The only other way to get here is for
+ getpkt to fail; close the connection and reopen it at the
+ top of the loop. */
+
+ if (exit_requested)
{
- unsigned char sig;
- int packet_len;
- int new_packet_len = -1;
+ detach_or_kill_for_exit ();
+ exit (0);
+ }
- response_needed = 0;
- packet_len = getpkt (own_buf);
- if (packet_len <= 0)
- break;
- response_needed = 1;
+ fprintf (stderr,
+ "Remote side has terminated connection. "
+ "GDBserver will reopen the connection.\n");
- i = 0;
- ch = own_buf[i++];
- switch (ch)
+ if (tracing)
+ {
+ if (disconnected_tracing)
{
- case 'q':
- handle_query (own_buf, packet_len, &new_packet_len);
- break;
- case 'Q':
- handle_general_set (own_buf);
- break;
- case 'D':
- require_running (own_buf);
- fprintf (stderr, "Detaching from inferior\n");
- if (detach_inferior () != 0)
- write_enn (own_buf);
- else
+ /* Try to enable non-stop/async mode, so we we can both
+ wait for an async socket accept, and handle async
+ target events simultaneously. There's also no point
+ either in having the target always stop all threads,
+ when we're going to pass signals down without
+ informing GDB. */
+ if (!non_stop)
{
- write_ok (own_buf);
-
- if (extended_protocol)
- {
- /* Treat this like a normal program exit. */
- signal = 0;
- status = 'W';
- }
- else
- {
- putpkt (own_buf);
- remote_close ();
-
- /* If we are attached, then we can exit. Otherwise, we
- need to hang around doing nothing, until the child
- is gone. */
- if (!attached)
- join_inferior ();
-
- exit (0);
- }
- }
- break;
- case '!':
- extended_protocol = 1;
- write_ok (own_buf);
- break;
- case '?':
- prepare_resume_reply (own_buf, status, signal);
- break;
- case 'H':
- if (own_buf[1] == 'c' || own_buf[1] == 'g' || own_buf[1] == 's')
- {
- unsigned long gdb_id, thread_id;
-
- require_running (own_buf);
- gdb_id = strtoul (&own_buf[2], NULL, 16);
- if (gdb_id == 0 || gdb_id == -1)
- thread_id = gdb_id;
- else
- {
- thread_id = gdb_id_to_thread_id (gdb_id);
- if (thread_id == 0)
- {
- write_enn (own_buf);
- break;
- }
- }
-
- if (own_buf[1] == 'g')
- {
- general_thread = thread_id;
- set_desired_inferior (1);
- }
- else if (own_buf[1] == 'c')
- cont_thread = thread_id;
- else if (own_buf[1] == 's')
- step_thread = thread_id;
-
- write_ok (own_buf);
- }
- else
- {
- /* Silently ignore it so that gdb can extend the protocol
- without compatibility headaches. */
- own_buf[0] = '\0';
+ if (start_non_stop (1))
+ non_stop = 1;
+
+ /* Detaching implicitly resumes all threads; simply
+ disconnecting does not. */
}
+ }
+ else
+ {
+ fprintf (stderr,
+ "Disconnected tracing disabled; stopping trace run.\n");
+ stop_tracing ();
+ }
+ }
+ }
+}
+
+/* Event loop callback that handles a serial event. The first byte in
+ the serial buffer gets us here. We expect characters to arrive at
+ a brisk pace, so we read the rest of the packet with a blocking
+ getpkt call. */
+
+static int
+process_serial_event (void)
+{
+ char ch;
+ int i = 0;
+ int signal;
+ unsigned int len;
+ CORE_ADDR mem_addr;
+ int pid;
+ unsigned char sig;
+ int packet_len;
+ int new_packet_len = -1;
+
+ /* Used to decide when gdbserver should exit in
+ multi-mode/remote. */
+ static int have_ran = 0;
+
+ if (!have_ran)
+ have_ran = target_running ();
+
+ disable_async_io ();
+
+ response_needed = 0;
+ packet_len = getpkt (own_buf);
+ if (packet_len <= 0)
+ {
+ remote_close ();
+ /* Force an event loop break. */
+ return -1;
+ }
+ response_needed = 1;
+
+ i = 0;
+ ch = own_buf[i++];
+ switch (ch)
+ {
+ case 'q':
+ handle_query (own_buf, packet_len, &new_packet_len);
+ break;
+ case 'Q':
+ handle_general_set (own_buf);
+ break;
+ case 'D':
+ require_running (own_buf);
+
+ if (multi_process)
+ {
+ i++; /* skip ';' */
+ pid = strtol (&own_buf[i], NULL, 16);
+ }
+ else
+ pid =
+ ptid_get_pid (((struct inferior_list_entry *) current_inferior)->id);
+
+ if (tracing && disconnected_tracing)
+ {
+ struct thread_resume resume_info;
+ struct process_info *process = find_process_pid (pid);
+
+ if (process == NULL)
+ {
+ write_enn (own_buf);
break;
- case 'g':
- require_running (own_buf);
- set_desired_inferior (1);
- registers_to_string (own_buf);
- break;
- case 'G':
- require_running (own_buf);
- set_desired_inferior (1);
- registers_from_string (&own_buf[1]);
- write_ok (own_buf);
- break;
- case 'm':
- require_running (own_buf);
- decode_m_packet (&own_buf[1], &mem_addr, &len);
- if (read_inferior_memory (mem_addr, mem_buf, len) == 0)
- convert_int_to_ascii (mem_buf, own_buf, len);
- else
- write_enn (own_buf);
- break;
- case 'M':
- require_running (own_buf);
- decode_M_packet (&own_buf[1], &mem_addr, &len, mem_buf);
- if (write_inferior_memory (mem_addr, mem_buf, len) == 0)
- write_ok (own_buf);
- else
- write_enn (own_buf);
- break;
- case 'X':
- require_running (own_buf);
- if (decode_X_packet (&own_buf[1], packet_len - 1,
- &mem_addr, &len, mem_buf) < 0
- || write_inferior_memory (mem_addr, mem_buf, len) != 0)
- write_enn (own_buf);
- else
- write_ok (own_buf);
- break;
- case 'C':
- require_running (own_buf);
- convert_ascii_to_int (own_buf + 1, &sig, 1);
- if (target_signal_to_host_p (sig))
- signal = target_signal_to_host (sig);
- else
- signal = 0;
- myresume (own_buf, 0, &signal, &status);
- break;
- case 'S':
- require_running (own_buf);
- convert_ascii_to_int (own_buf + 1, &sig, 1);
- if (target_signal_to_host_p (sig))
- signal = target_signal_to_host (sig);
- else
- signal = 0;
- myresume (own_buf, 1, &signal, &status);
- break;
- case 'c':
- require_running (own_buf);
- signal = 0;
- myresume (own_buf, 0, &signal, &status);
- break;
- case 's':
- require_running (own_buf);
- signal = 0;
- myresume (own_buf, 1, &signal, &status);
- break;
- case 'Z':
- {
- char *lenptr;
- char *dataptr;
- CORE_ADDR addr = strtoul (&own_buf[3], &lenptr, 16);
- int len = strtol (lenptr + 1, &dataptr, 16);
- char type = own_buf[1];
-
- if (the_target->insert_watchpoint == NULL
- || (type < '2' || type > '4'))
- {
- /* No watchpoint support or not a watchpoint command;
- unrecognized either way. */
- own_buf[0] = '\0';
- }
- else
- {
- int res;
-
- require_running (own_buf);
- res = (*the_target->insert_watchpoint) (type, addr, len);
- if (res == 0)
- write_ok (own_buf);
- else if (res == 1)
- /* Unsupported. */
- own_buf[0] = '\0';
- else
- write_enn (own_buf);
- }
- break;
- }
- case 'z':
- {
- char *lenptr;
- char *dataptr;
- CORE_ADDR addr = strtoul (&own_buf[3], &lenptr, 16);
- int len = strtol (lenptr + 1, &dataptr, 16);
- char type = own_buf[1];
-
- if (the_target->remove_watchpoint == NULL
- || (type < '2' || type > '4'))
- {
- /* No watchpoint support or not a watchpoint command;
- unrecognized either way. */
- own_buf[0] = '\0';
- }
- else
- {
- int res;
-
- require_running (own_buf);
- res = (*the_target->remove_watchpoint) (type, addr, len);
- if (res == 0)
- write_ok (own_buf);
- else if (res == 1)
- /* Unsupported. */
- own_buf[0] = '\0';
- else
- write_enn (own_buf);
- }
- break;
- }
- case 'k':
- response_needed = 0;
- if (!target_running ())
- /* The packet we received doesn't make sense - but we
- can't reply to it, either. */
- goto restart;
-
- fprintf (stderr, "Killing inferior\n");
- kill_inferior ();
-
- /* When using the extended protocol, we wait with no
- program running. The traditional protocol will exit
- instead. */
- if (extended_protocol)
- {
- status = 'X';
- signal = TARGET_SIGNAL_KILL;
- was_running = 0;
- goto restart;
- }
- else
+ }
+
+ fprintf (stderr,
+ "Disconnected tracing in effect, "
+ "leaving gdbserver attached to the process\n");
+
+ /* Make sure we're in non-stop/async mode, so we we can both
+ wait for an async socket accept, and handle async target
+ events simultaneously. There's also no point either in
+ having the target stop all threads, when we're going to
+ pass signals down without informing GDB. */
+ if (!non_stop)
+ {
+ if (debug_threads)
+ fprintf (stderr, "Forcing non-stop mode\n");
+
+ non_stop = 1;
+ start_non_stop (1);
+ }
+
+ process->gdb_detached = 1;
+
+ /* Detaching implicitly resumes all threads. */
+ resume_info.thread = minus_one_ptid;
+ resume_info.kind = resume_continue;
+ resume_info.sig = 0;
+ (*the_target->resume) (&resume_info, 1);
+
+ write_ok (own_buf);
+ break; /* from switch/case */
+ }
+
+ fprintf (stderr, "Detaching from process %d\n", pid);
+ stop_tracing ();
+ if (detach_inferior (pid) != 0)
+ write_enn (own_buf);
+ else
+ {
+ discard_queued_stop_replies (pid);
+ write_ok (own_buf);
+
+ if (extended_protocol)
+ {
+ /* Treat this like a normal program exit. */
+ last_status.kind = TARGET_WAITKIND_EXITED;
+ last_status.value.integer = 0;
+ last_ptid = pid_to_ptid (pid);
+
+ current_inferior = NULL;
+ }
+ else
+ {
+ putpkt (own_buf);
+ remote_close ();
+
+ /* If we are attached, then we can exit. Otherwise, we
+ need to hang around doing nothing, until the child is
+ gone. */
+ for_each_inferior (&all_processes,
+ join_inferiors_callback);
+ exit (0);
+ }
+ }
+ break;
+ case '!':
+ extended_protocol = 1;
+ write_ok (own_buf);
+ break;
+ case '?':
+ handle_status (own_buf);
+ break;
+ case 'H':
+ if (own_buf[1] == 'c' || own_buf[1] == 'g' || own_buf[1] == 's')
+ {
+ ptid_t gdb_id, thread_id;
+ int pid;
+
+ require_running (own_buf);
+
+ gdb_id = read_ptid (&own_buf[2], NULL);
+
+ pid = ptid_get_pid (gdb_id);
+
+ if (ptid_equal (gdb_id, null_ptid)
+ || ptid_equal (gdb_id, minus_one_ptid))
+ thread_id = null_ptid;
+ else if (pid != 0
+ && ptid_equal (pid_to_ptid (pid),
+ gdb_id))
+ {
+ struct thread_info *thread =
+ (struct thread_info *) find_inferior (&all_threads,
+ first_thread_of,
+ &pid);
+ if (!thread)
{
- exit (0);
+ write_enn (own_buf);
break;
}
- case 'T':
- {
- unsigned long gdb_id, thread_id;
-
- require_running (own_buf);
- gdb_id = strtoul (&own_buf[1], NULL, 16);
- thread_id = gdb_id_to_thread_id (gdb_id);
- if (thread_id == 0)
- {
- write_enn (own_buf);
- break;
- }
-
- if (mythread_alive (thread_id))
- write_ok (own_buf);
- else
- write_enn (own_buf);
- }
- break;
- case 'R':
- response_needed = 0;
- /* Restarting the inferior is only supported in the
- extended protocol. */
- if (extended_protocol)
+ thread_id = ((struct inferior_list_entry *)thread)->id;
+ }
+ else
+ {
+ thread_id = gdb_id_to_thread_id (gdb_id);
+ if (ptid_equal (thread_id, null_ptid))
{
- if (target_running ())
- kill_inferior ();
- fprintf (stderr, "GDBserver restarting\n");
-
- /* Wait till we are at 1st instruction in prog. */
- if (program_argv != NULL)
- signal = start_inferior (program_argv, &status);
- else
- {
- status = 'X';
- signal = TARGET_SIGNAL_KILL;
- }
- goto restart;
+ write_enn (own_buf);
+ break;
}
- else
+ }
+
+ if (own_buf[1] == 'g')
+ {
+ if (ptid_equal (thread_id, null_ptid))
{
- /* It is a request we don't understand. Respond with an
- empty packet so that gdb knows that we don't support this
- request. */
- own_buf[0] = '\0';
- break;
+ /* GDB is telling us to choose any thread. Check if
+ the currently selected thread is still valid. If
+ it is not, select the first available. */
+ struct thread_info *thread =
+ (struct thread_info *) find_inferior_id (&all_threads,
+ general_thread);
+ if (thread == NULL)
+ thread_id = all_threads.head->id;
}
- case 'v':
- /* Extended (long) request. */
- handle_v_requests (own_buf, &status, &signal,
- packet_len, &new_packet_len);
- break;
- default:
- /* It is a request we don't understand. Respond with an
- empty packet so that gdb knows that we don't support this
- request. */
- own_buf[0] = '\0';
- break;
+ general_thread = thread_id;
+ set_desired_inferior (1);
}
+ else if (own_buf[1] == 'c')
+ cont_thread = thread_id;
+ else if (own_buf[1] == 's')
+ step_thread = thread_id;
+
+ write_ok (own_buf);
+ }
+ else
+ {
+ /* Silently ignore it so that gdb can extend the protocol
+ without compatibility headaches. */
+ own_buf[0] = '\0';
+ }
+ break;
+ case 'g':
+ require_running (own_buf);
+ if (current_traceframe >= 0)
+ {
+ struct regcache *regcache = new_register_cache ();
- if (new_packet_len != -1)
- putpkt_binary (own_buf, new_packet_len);
+ if (fetch_traceframe_registers (current_traceframe,
+ regcache, -1) == 0)
+ registers_to_string (regcache, own_buf);
else
- putpkt (own_buf);
+ write_enn (own_buf);
+ free_register_cache (regcache);
+ }
+ else
+ {
+ struct regcache *regcache;
+
+ set_desired_inferior (1);
+ regcache = get_thread_regcache (current_inferior, 1);
+ registers_to_string (regcache, own_buf);
+ }
+ break;
+ case 'G':
+ require_running (own_buf);
+ if (current_traceframe >= 0)
+ write_enn (own_buf);
+ else
+ {
+ struct regcache *regcache;
- response_needed = 0;
+ set_desired_inferior (1);
+ regcache = get_thread_regcache (current_inferior, 1);
+ registers_from_string (regcache, &own_buf[1]);
+ write_ok (own_buf);
+ }
+ break;
+ case 'm':
+ require_running (own_buf);
+ decode_m_packet (&own_buf[1], &mem_addr, &len);
+ if (gdb_read_memory (mem_addr, mem_buf, len) == 0)
+ convert_int_to_ascii (mem_buf, own_buf, len);
+ else
+ write_enn (own_buf);
+ break;
+ case 'M':
+ require_running (own_buf);
+ decode_M_packet (&own_buf[1], &mem_addr, &len, &mem_buf);
+ if (gdb_write_memory (mem_addr, mem_buf, len) == 0)
+ write_ok (own_buf);
+ else
+ write_enn (own_buf);
+ break;
+ case 'X':
+ require_running (own_buf);
+ if (decode_X_packet (&own_buf[1], packet_len - 1,
+ &mem_addr, &len, &mem_buf) < 0
+ || gdb_write_memory (mem_addr, mem_buf, len) != 0)
+ write_enn (own_buf);
+ else
+ write_ok (own_buf);
+ break;
+ case 'C':
+ require_running (own_buf);
+ convert_ascii_to_int (own_buf + 1, &sig, 1);
+ if (target_signal_to_host_p (sig))
+ signal = target_signal_to_host (sig);
+ else
+ signal = 0;
+ myresume (own_buf, 0, signal);
+ break;
+ case 'S':
+ require_running (own_buf);
+ convert_ascii_to_int (own_buf + 1, &sig, 1);
+ if (target_signal_to_host_p (sig))
+ signal = target_signal_to_host (sig);
+ else
+ signal = 0;
+ myresume (own_buf, 1, signal);
+ break;
+ case 'c':
+ require_running (own_buf);
+ signal = 0;
+ myresume (own_buf, 0, signal);
+ break;
+ case 's':
+ require_running (own_buf);
+ signal = 0;
+ myresume (own_buf, 1, signal);
+ break;
+ case 'Z': /* insert_ ... */
+ /* Fallthrough. */
+ case 'z': /* remove_ ... */
+ {
+ char *lenptr;
+ char *dataptr;
+ CORE_ADDR addr = strtoul (&own_buf[3], &lenptr, 16);
+ int len = strtol (lenptr + 1, &dataptr, 16);
+ char type = own_buf[1];
+ int res;
+ const int insert = ch == 'Z';
+
+ /* Default to unrecognized/unsupported. */
+ res = 1;
+ switch (type)
+ {
+ case '0': /* software-breakpoint */
+ case '1': /* hardware-breakpoint */
+ case '2': /* write watchpoint */
+ case '3': /* read watchpoint */
+ case '4': /* access watchpoint */
+ require_running (own_buf);
+ if (insert && the_target->insert_point != NULL)
+ res = (*the_target->insert_point) (type, addr, len);
+ else if (!insert && the_target->remove_point != NULL)
+ res = (*the_target->remove_point) (type, addr, len);
+ break;
+ default:
+ break;
+ }
+
+ if (res == 0)
+ write_ok (own_buf);
+ else if (res == 1)
+ /* Unsupported. */
+ own_buf[0] = '\0';
+ else
+ write_enn (own_buf);
+ break;
+ }
+ case 'k':
+ response_needed = 0;
+ if (!target_running ())
+ /* The packet we received doesn't make sense - but we can't
+ reply to it, either. */
+ return 0;
+
+ fprintf (stderr, "Killing all inferiors\n");
+ for_each_inferior (&all_processes, kill_inferior_callback);
+
+ /* When using the extended protocol, we wait with no program
+ running. The traditional protocol will exit instead. */
+ if (extended_protocol)
+ {
+ last_status.kind = TARGET_WAITKIND_EXITED;
+ last_status.value.sig = TARGET_SIGNAL_KILL;
+ return 0;
+ }
+ else
+ exit (0);
- if (was_running && (status == 'W' || status == 'X'))
- {
- was_running = 0;
+ case 'T':
+ {
+ ptid_t gdb_id, thread_id;
- if (status == 'W')
- fprintf (stderr,
- "\nChild exited with status %d\n", signal);
- if (status == 'X')
- fprintf (stderr, "\nChild terminated with signal = 0x%x (%s)\n",
- target_signal_to_host (signal),
- target_signal_to_name (signal));
-
- if (extended_protocol)
- goto restart;
- else
- {
- fprintf (stderr, "GDBserver exiting\n");
- exit (0);
- }
- }
+ require_running (own_buf);
+
+ gdb_id = read_ptid (&own_buf[1], NULL);
+ thread_id = gdb_id_to_thread_id (gdb_id);
+ if (ptid_equal (thread_id, null_ptid))
+ {
+ write_enn (own_buf);
+ break;
+ }
- if (status != 'W' && status != 'X')
- was_running = 1;
+ if (mythread_alive (thread_id))
+ write_ok (own_buf);
+ else
+ write_enn (own_buf);
+ }
+ break;
+ case 'R':
+ response_needed = 0;
+
+ /* Restarting the inferior is only supported in the extended
+ protocol. */
+ if (extended_protocol)
+ {
+ if (target_running ())
+ for_each_inferior (&all_processes,
+ kill_inferior_callback);
+ fprintf (stderr, "GDBserver restarting\n");
+
+ /* Wait till we are at 1st instruction in prog. */
+ if (program_argv != NULL)
+ start_inferior (program_argv);
+ else
+ {
+ last_status.kind = TARGET_WAITKIND_EXITED;
+ last_status.value.sig = TARGET_SIGNAL_KILL;
+ }
+ return 0;
}
+ else
+ {
+ /* It is a request we don't understand. Respond with an
+ empty packet so that gdb knows that we don't support this
+ request. */
+ own_buf[0] = '\0';
+ break;
+ }
+ case 'v':
+ /* Extended (long) request. */
+ handle_v_requests (own_buf, packet_len, &new_packet_len);
+ break;
+
+ default:
+ /* It is a request we don't understand. Respond with an empty
+ packet so that gdb knows that we don't support this
+ request. */
+ own_buf[0] = '\0';
+ break;
+ }
- /* If an exit was requested (using the "monitor exit" command),
- terminate now. The only other way to get here is for
- getpkt to fail; close the connection and reopen it at the
- top of the loop. */
+ if (new_packet_len != -1)
+ putpkt_binary (own_buf, new_packet_len);
+ else
+ putpkt (own_buf);
- if (exit_requested)
+ response_needed = 0;
+
+ if (!extended_protocol && have_ran && !target_running ())
+ {
+ /* In non-stop, defer exiting until GDB had a chance to query
+ the whole vStopped list (until it gets an OK). */
+ if (!notif_queue)
{
+ fprintf (stderr, "GDBserver exiting\n");
remote_close ();
- if (attached && target_running ())
- detach_inferior ();
- else if (target_running ())
- kill_inferior ();
exit (0);
}
+ }
+
+ if (exit_requested)
+ return -1;
+
+ return 0;
+}
+
+/* Event-loop callback for serial events. */
+
+int
+handle_serial_event (int err, gdb_client_data client_data)
+{
+ if (debug_threads)
+ fprintf (stderr, "handling possible serial event\n");
+
+ /* Really handle it. */
+ if (process_serial_event () < 0)
+ return -1;
+
+ /* Be sure to not change the selected inferior behind GDB's back.
+ Important in the non-stop mode asynchronous protocol. */
+ set_desired_inferior (1);
+
+ return 0;
+}
+
+/* Event-loop callback for target events. */
+
+int
+handle_target_event (int err, gdb_client_data client_data)
+{
+ if (debug_threads)
+ fprintf (stderr, "handling possible target event\n");
+
+ last_ptid = mywait (minus_one_ptid, &last_status,
+ TARGET_WNOHANG, 1);
+
+ if (last_status.kind != TARGET_WAITKIND_IGNORE)
+ {
+ int pid = ptid_get_pid (last_ptid);
+ struct process_info *process = find_process_pid (pid);
+ int forward_event = !gdb_connected () || process->gdb_detached;
+
+ if (last_status.kind == TARGET_WAITKIND_EXITED
+ || last_status.kind == TARGET_WAITKIND_SIGNALLED)
+ {
+ mark_breakpoints_out (process);
+ mourn_inferior (process);
+ }
else
{
- fprintf (stderr, "Remote side has terminated connection. "
- "GDBserver will reopen the connection.\n");
- remote_close ();
+ /* We're reporting this thread as stopped. Update its
+ "want-stopped" state to what the client wants, until it
+ gets a new resume action. */
+ current_inferior->last_resume_kind = resume_stop;
+ current_inferior->last_status = last_status;
+ }
+
+ if (forward_event)
+ {
+ if (!target_running ())
+ {
+ /* The last process exited. We're done. */
+ exit (0);
+ }
+
+ if (last_status.kind == TARGET_WAITKIND_STOPPED)
+ {
+ /* A thread stopped with a signal, but gdb isn't
+ connected to handle it. Pass it down to the
+ inferior, as if it wasn't being traced. */
+ struct thread_resume resume_info;
+
+ if (debug_threads)
+ fprintf (stderr,
+ "GDB not connected; forwarding event %d for [%s]\n",
+ (int) last_status.kind,
+ target_pid_to_str (last_ptid));
+
+ resume_info.thread = last_ptid;
+ resume_info.kind = resume_continue;
+ resume_info.sig = target_signal_to_host (last_status.value.sig);
+ (*the_target->resume) (&resume_info, 1);
+ }
+ else if (debug_threads)
+ fprintf (stderr, "GDB not connected; ignoring event %d for [%s]\n",
+ (int) last_status.kind,
+ target_pid_to_str (last_ptid));
+ }
+ else
+ {
+ /* Something interesting. Tell GDB about it. */
+ push_event (last_ptid, &last_status);
}
}
+
+ /* Be sure to not change the selected inferior behind GDB's back.
+ Important in the non-stop mode asynchronous protocol. */
+ set_desired_inferior (1);
+
+ return 0;
}