/* Multi-process/thread control defs for GDB, the GNU debugger.
- Copyright 1987, 88, 89, 90, 91, 92, 1993, 1998
-
+ Copyright (C) 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1997, 1998, 1999,
+ 2000, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
Contributed by Lynx Real-Time Systems, Inc. Los Gatos, CA.
- Free Software Foundation, Inc.
+
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef GDBTHREAD_H
#define GDBTHREAD_H
-extern void init_thread_list PARAMS ((void));
+struct symtab;
+
+#include "breakpoint.h"
+#include "frame.h"
+#include "ui-out.h"
+#include "inferior.h"
+
+/* Frontend view of the thread state. Possible extensions: stepping,
+ finishing, until(ling),... */
+enum thread_state
+{
+ THREAD_STOPPED,
+ THREAD_RUNNING,
+ THREAD_EXITED,
+};
+
+/* Inferior thread specific part of `struct infcall_control_state'.
+
+ Inferior process counterpart is `struct inferior_control_state'. */
+
+struct thread_control_state
+{
+ /* User/external stepping state. */
+
+ /* Step-resume or longjmp-resume breakpoint. */
+ struct breakpoint *step_resume_breakpoint;
+
+ /* Exception-resume breakpoint. */
+ struct breakpoint *exception_resume_breakpoint;
+
+ /* Range to single step within.
+
+ If this is nonzero, respond to a single-step signal by continuing
+ to step if the pc is in this range.
+
+ If step_range_start and step_range_end are both 1, it means to
+ step for a single instruction (FIXME: it might clean up
+ wait_for_inferior in a minor way if this were changed to the
+ address of the instruction and that address plus one. But maybe
+ not). */
+ CORE_ADDR step_range_start; /* Inclusive */
+ CORE_ADDR step_range_end; /* Exclusive */
+
+ /* Stack frame address as of when stepping command was issued.
+ This is how we know when we step into a subroutine call, and how
+ to set the frame for the breakpoint used to step out. */
+ struct frame_id step_frame_id;
+
+ /* Similarly, the frame ID of the underlying stack frame (skipping
+ any inlined frames). */
+ struct frame_id step_stack_frame_id;
+
+ /* Nonzero if we are presently stepping over a breakpoint.
+
+ If we hit a breakpoint or watchpoint, and then continue, we need
+ to single step the current thread with breakpoints disabled, to
+ avoid hitting the same breakpoint or watchpoint again. And we
+ should step just a single thread and keep other threads stopped,
+ so that other threads don't miss breakpoints while they are
+ removed.
+
+ So, this variable simultaneously means that we need to single
+ step the current thread, keep other threads stopped, and that
+ breakpoints should be removed while we step.
+
+ This variable is set either:
+ - in proceed, when we resume inferior on user's explicit request
+ - in keep_going, if handle_inferior_event decides we need to
+ step over breakpoint.
+
+ The variable is cleared in normal_stop. The proceed calls
+ wait_for_inferior, which calls handle_inferior_event in a loop,
+ and until wait_for_inferior exits, this variable is changed only
+ by keep_going. */
+ int trap_expected;
+
+ /* Nonzero if the thread is being proceeded for a "finish" command
+ or a similar situation when stop_registers should be saved. */
+ int proceed_to_finish;
+
+ /* Nonzero if the thread is being proceeded for an inferior function
+ call. */
+ int in_infcall;
+
+ enum step_over_calls_kind step_over_calls;
+
+ /* Nonzero if stopped due to a step command. */
+ int stop_step;
+
+ /* Chain containing status of breakpoint(s) the thread stopped
+ at. */
+ bpstat stop_bpstat;
+};
+
+/* Inferior thread specific part of `struct infcall_suspend_state'.
+
+ Inferior process counterpart is `struct inferior_suspend_state'. */
+
+struct thread_suspend_state
+{
+ /* Last signal that the inferior received (why it stopped). */
+ enum target_signal stop_signal;
+};
+
+struct thread_info
+{
+ struct thread_info *next;
+ ptid_t ptid; /* "Actual process id";
+ In fact, this may be overloaded with
+ kernel thread id, etc. */
+ int num; /* Convenient handle (GDB thread id) */
+
+ /* The name of the thread, as specified by the user. This is NULL
+ if the thread does not have a user-given name. */
+ char *name;
+
+ /* Non-zero means the thread is executing. Note: this is different
+ from saying that there is an active target and we are stopped at
+ a breakpoint, for instance. This is a real indicator whether the
+ thread is off and running. */
+ int executing;
+
+ /* Frontend view of the thread state. Note that the RUNNING/STOPPED
+ states are different from EXECUTING. When the thread is stopped
+ internally while handling an internal event, like a software
+ single-step breakpoint, EXECUTING will be false, but running will
+ still be true. As a possible future extension, this could turn
+ into enum { stopped, exited, stepping, finishing, until(ling),
+ running ... } */
+ int state;
+
+ /* If this is > 0, then it means there's code out there that relies
+ on this thread being listed. Don't delete it from the lists even
+ if we detect it exiting. */
+ int refcount;
+
+ /* State of GDB control of inferior thread execution.
+ See `struct thread_control_state'. */
+ struct thread_control_state control;
+
+ /* State of inferior thread to restore after GDB is done with an inferior
+ call. See `struct thread_suspend_state'. */
+ struct thread_suspend_state suspend;
+
+ int current_line;
+ struct symtab *current_symtab;
+
+ /* Internal stepping state. */
+
+ /* Record the pc of the thread the last time it stopped. This is
+ maintained by proceed and keep_going, and used in
+ adjust_pc_after_break to distinguish a hardware single-step
+ SIGTRAP from a breakpoint SIGTRAP. */
+ CORE_ADDR prev_pc;
+
+ /* Should we step over breakpoint next time keep_going is called? */
+ int stepping_over_breakpoint;
+
+ /* Set to TRUE if we should finish single-stepping over a breakpoint
+ after hitting the current step-resume breakpoint. The context here
+ is that GDB is to do `next' or `step' while signal arrives.
+ When stepping over a breakpoint and signal arrives, GDB will attempt
+ to skip signal handler, so it inserts a step_resume_breakpoint at the
+ signal return address, and resume inferior.
+ step_after_step_resume_breakpoint is set to TRUE at this moment in
+ order to keep GDB in mind that there is still a breakpoint to step over
+ when GDB gets back SIGTRAP from step_resume_breakpoint. */
+ int step_after_step_resume_breakpoint;
+
+ /* Per-thread command support. */
+
+ /* Pointer to what is left to do for an execution command after the
+ target stops. Used only in asynchronous mode, by targets that
+ support async execution. Several execution commands use it. */
+ struct continuation *continuations;
+
+ /* Similar to the above, but used when a single execution command
+ requires several resume/stop iterations. Used by the step
+ command. */
+ struct continuation *intermediate_continuations;
+
+ /* If stepping, nonzero means step count is > 1 so don't print frame
+ next time inferior stops if it stops due to stepping. */
+ int step_multi;
+
+ /* This is used to remember when a fork or vfork event was caught by
+ a catchpoint, and thus the event is to be followed at the next
+ resume of the thread, and not immediately. */
+ struct target_waitstatus pending_follow;
-extern void add_thread PARAMS ((int pid));
+ /* True if this thread has been explicitly requested to stop. */
+ int stop_requested;
-extern void delete_thread PARAMS ((int));
-
-extern int thread_id_to_pid PARAMS ((int));
+ /* The initiating frame of a nexting operation, used for deciding
+ which exceptions to intercept. */
+ struct frame_id initiating_frame;
-extern int in_thread_list PARAMS ((int pid));
+ /* Private data used by the target vector implementation. */
+ struct private_thread_info *private;
-extern int pid_to_thread_id PARAMS ((int pid));
+ /* Function that is called to free PRIVATE. If this is NULL, then
+ xfree will be called on PRIVATE. */
+ void (*private_dtor) (struct private_thread_info *);
+};
-extern int valid_thread_id PARAMS ((int thread));
+/* Create an empty thread list, or empty the existing one. */
+extern void init_thread_list (void);
-extern void load_infrun_state PARAMS ((int, CORE_ADDR *, CORE_ADDR *, char **,
- int *, struct breakpoint **,
- struct breakpoint **, CORE_ADDR *,
- CORE_ADDR *, CORE_ADDR *, int *, int *));
+/* Add a thread to the thread list, print a message
+ that a new thread is found, and return the pointer to
+ the new thread. Caller my use this pointer to
+ initialize the private thread data. */
+extern struct thread_info *add_thread (ptid_t ptid);
-extern void save_infrun_state PARAMS ((int, CORE_ADDR, CORE_ADDR, char *,
- int, struct breakpoint *,
- struct breakpoint *, CORE_ADDR,
- CORE_ADDR, CORE_ADDR, int, int));
+/* Same as add_thread, but does not print a message
+ about new thread. */
+extern struct thread_info *add_thread_silent (ptid_t ptid);
+
+/* Same as add_thread, and sets the private info. */
+extern struct thread_info *add_thread_with_info (ptid_t ptid,
+ struct private_thread_info *);
+
+/* Delete an existing thread list entry. */
+extern void delete_thread (ptid_t);
+
+/* Delete an existing thread list entry, and be quiet about it. Used
+ after the process this thread having belonged to having already
+ exited, for example. */
+extern void delete_thread_silent (ptid_t);
+
+/* Delete a step_resume_breakpoint from the thread database. */
+extern void delete_step_resume_breakpoint (struct thread_info *);
+
+/* Delete an exception_resume_breakpoint from the thread database. */
+extern void delete_exception_resume_breakpoint (struct thread_info *);
+
+/* Translate the integer thread id (GDB's homegrown id, not the system's)
+ into a "pid" (which may be overloaded with extra thread information). */
+extern ptid_t thread_id_to_pid (int);
+
+/* Translate a 'pid' (which may be overloaded with extra thread information)
+ into the integer thread id (GDB's homegrown id, not the system's). */
+extern int pid_to_thread_id (ptid_t ptid);
+
+/* Boolean test for an already-known pid (which may be overloaded with
+ extra thread information). */
+extern int in_thread_list (ptid_t ptid);
+
+/* Boolean test for an already-known thread id (GDB's homegrown id,
+ not the system's). */
+extern int valid_thread_id (int thread);
+
+/* Search function to lookup a thread by 'pid'. */
+extern struct thread_info *find_thread_ptid (ptid_t ptid);
+
+/* Find thread by GDB user-visible thread number. */
+struct thread_info *find_thread_id (int num);
+
+/* Finds the first thread of the inferior given by PID. If PID is -1,
+ returns the first thread in the list. */
+struct thread_info *first_thread_of_process (int pid);
+
+/* Returns any thread of process PID. */
+extern struct thread_info *any_thread_of_process (int pid);
+
+/* Returns any non-exited thread of process PID, giving preference for
+ not executing threads. */
+extern struct thread_info *any_live_thread_of_process (int pid);
+
+/* Change the ptid of thread OLD_PTID to NEW_PTID. */
+void thread_change_ptid (ptid_t old_ptid, ptid_t new_ptid);
+
+/* Iterator function to call a user-provided callback function
+ once for each known thread. */
+typedef int (*thread_callback_func) (struct thread_info *, void *);
+extern struct thread_info *iterate_over_threads (thread_callback_func, void *);
+
+extern int thread_count (void);
+
+/* Switch from one thread to another. */
+extern void switch_to_thread (ptid_t ptid);
+
+/* Marks thread PTID is running, or stopped.
+ If PIDGET (PTID) is -1, marks all threads. */
+extern void set_running (ptid_t ptid, int running);
+
+/* Marks or clears thread(s) PTID as having been requested to stop.
+ If PTID is MINUS_ONE_PTID, applies to all threads. If
+ ptid_is_pid(PTID) is true, applies to all threads of the process
+ pointed at by PTID. If STOP, then the THREAD_STOP_REQUESTED
+ observer is called with PTID as argument. */
+extern void set_stop_requested (ptid_t ptid, int stop);
+
+/* NOTE: Since the thread state is not a boolean, most times, you do
+ not want to check it with negation. If you really want to check if
+ the thread is stopped,
+
+ use (good):
+
+ if (is_stopped (ptid))
+
+ instead of (bad):
+
+ if (!is_running (ptid))
+
+ The latter also returns true on exited threads, most likelly not
+ what you want. */
+
+/* Reports if in the frontend's perpective, thread PTID is running. */
+extern int is_running (ptid_t ptid);
+
+/* Is this thread listed, but known to have exited? We keep it listed
+ (but not visible) until it's safe to delete. */
+extern int is_exited (ptid_t ptid);
+
+/* In the frontend's perpective, is this thread stopped? */
+extern int is_stopped (ptid_t ptid);
+
+/* In the frontend's perpective is there any thread running? */
+extern int any_running (void);
+
+/* Marks thread PTID as executing, or not. If PIDGET (PTID) is -1,
+ marks all threads.
+
+ Note that this is different from the running state. See the
+ description of state and executing fields of struct
+ thread_info. */
+extern void set_executing (ptid_t ptid, int executing);
+
+/* Reports if thread PTID is executing. */
+extern int is_executing (ptid_t ptid);
+
+/* Merge the executing property of thread PTID over to its thread
+ state property (frontend running/stopped view).
+
+ "not executing" -> "stopped"
+ "executing" -> "running"
+ "exited" -> "exited"
+
+ If PIDGET (PTID) is -1, go over all threads.
+
+ Notifications are only emitted if the thread state did change. */
+extern void finish_thread_state (ptid_t ptid);
+
+/* Same as FINISH_THREAD_STATE, but with an interface suitable to be
+ registered as a cleanup. PTID_P points to the ptid_t that is
+ passed to FINISH_THREAD_STATE. */
+extern void finish_thread_state_cleanup (void *ptid_p);
/* Commands with a prefix of `thread'. */
extern struct cmd_list_element *thread_cmd_list;
-#endif /* GDBTHREAD_H */
+/* Print notices on thread events (attach, detach, etc.), set with
+ `set print thread-events'. */
+extern int print_thread_events;
+
+extern void print_thread_info (struct ui_out *uiout, char *threads,
+ int pid);
+
+extern struct cleanup *make_cleanup_restore_current_thread (void);
+
+/* Returns a pointer into the thread_info corresponding to
+ INFERIOR_PTID. INFERIOR_PTID *must* be in the thread list. */
+extern struct thread_info* inferior_thread (void);
+
+extern void update_thread_list (void);
+
+#endif /* GDBTHREAD_H */