-/* Target-machine dependent code for Hitachi H8/300, for GDB.
+/* Target-machine dependent code for Renesas H8/300, for GDB.
Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,
- 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
This file is part of GDB.
*/
#include "defs.h"
-#include "frame.h"
-#include "obstack.h"
-#include "symtab.h"
-#include "dis-asm.h"
-#include "gdbcmd.h"
-#include "gdbtypes.h"
-#include "gdbcore.h"
-#include "gdb_string.h"
#include "value.h"
+#include "arch-utils.h"
#include "regcache.h"
+#include "gdbcore.h"
+#include "objfiles.h"
+#include "gdb_assert.h"
+#include "dis-asm.h"
+#include "dwarf2-frame.h"
+#include "frame-base.h"
+#include "frame-unwind.h"
-extern int h8300hmode, h8300smode;
-
-#undef NUM_REGS
-#define NUM_REGS 11
+enum gdb_regnum
+{
+ E_R0_REGNUM, E_ER0_REGNUM = E_R0_REGNUM, E_ARG0_REGNUM = E_R0_REGNUM,
+ E_RET0_REGNUM = E_R0_REGNUM,
+ E_R1_REGNUM, E_ER1_REGNUM = E_R1_REGNUM, E_RET1_REGNUM = E_R1_REGNUM,
+ E_R2_REGNUM, E_ER2_REGNUM = E_R2_REGNUM, E_ARGLAST_REGNUM = E_R2_REGNUM,
+ E_R3_REGNUM, E_ER3_REGNUM = E_R3_REGNUM,
+ E_R4_REGNUM, E_ER4_REGNUM = E_R4_REGNUM,
+ E_R5_REGNUM, E_ER5_REGNUM = E_R5_REGNUM,
+ E_R6_REGNUM, E_ER6_REGNUM = E_R6_REGNUM, E_FP_REGNUM = E_R6_REGNUM,
+ E_SP_REGNUM,
+ E_CCR_REGNUM,
+ E_PC_REGNUM,
+ E_CYCLES_REGNUM,
+ E_TICK_REGNUM, E_EXR_REGNUM = E_TICK_REGNUM,
+ E_INST_REGNUM, E_TICKS_REGNUM = E_INST_REGNUM,
+ E_INSTS_REGNUM,
+ E_MACH_REGNUM,
+ E_MACL_REGNUM,
+ E_SBR_REGNUM,
+ E_VBR_REGNUM
+};
+
+#define H8300_MAX_NUM_REGS 18
+
+#define E_PSEUDO_CCR_REGNUM (NUM_REGS)
+#define E_PSEUDO_EXR_REGNUM (NUM_REGS+1)
+
+struct h8300_frame_cache
+{
+ /* Base address. */
+ CORE_ADDR base;
+ CORE_ADDR sp_offset;
+ CORE_ADDR pc;
-#define UNSIGNED_SHORT(X) ((X) & 0xffff)
+ /* Flag showing that a frame has been created in the prologue code. */
+ int uses_fp;
-#define IS_PUSH(x) ((x & 0xfff0)==0x6df0)
-#define IS_PUSH_FP(x) (x == 0x6df6)
-#define IS_MOVE_FP(x) (x == 0x0d76 || x == 0x0ff6)
-#define IS_MOV_SP_FP(x) (x == 0x0d76 || x == 0x0ff6)
-#define IS_SUB2_SP(x) (x==0x1b87)
-#define IS_SUB4_SP(x) (x==0x1b97)
-#define IS_SUBL_SP(x) (x==0x7a37)
-#define IS_MOVK_R5(x) (x==0x7905)
-#define IS_SUB_R5SP(x) (x==0x1957)
+ /* Saved registers. */
+ CORE_ADDR saved_regs[H8300_MAX_NUM_REGS];
+ CORE_ADDR saved_sp;
+};
+enum
+{
+ h8300_reg_size = 2,
+ h8300h_reg_size = 4,
+ h8300_max_reg_size = 4,
+};
-/* The register names change depending on whether the h8300h processor
- type is selected. */
+static int is_h8300hmode (struct gdbarch *gdbarch);
+static int is_h8300smode (struct gdbarch *gdbarch);
+static int is_h8300sxmode (struct gdbarch *gdbarch);
+static int is_h8300_normal_mode (struct gdbarch *gdbarch);
-static char *original_register_names[] = REGISTER_NAMES;
+#define BINWORD ((is_h8300hmode (current_gdbarch) \
+ && !is_h8300_normal_mode (current_gdbarch)) \
+ ? h8300h_reg_size : h8300_reg_size)
-static char *h8300h_register_names[] =
-{"er0", "er1", "er2", "er3", "er4", "er5", "er6",
- "sp", "ccr", "pc", "cycles", "tick", "inst"};
+static CORE_ADDR
+h8300_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_unsigned (next_frame, E_PC_REGNUM);
+}
-char **h8300_register_names = original_register_names;
+static CORE_ADDR
+h8300_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_unsigned (next_frame, E_SP_REGNUM);
+}
+static struct frame_id
+h8300_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (h8300_unwind_sp (gdbarch, next_frame),
+ frame_pc_unwind (next_frame));
+}
-/* Local function declarations. */
+/* Normal frames. */
-static CORE_ADDR examine_prologue ();
-static void set_machine_hook (char *filename);
+/* Allocate and initialize a frame cache. */
-CORE_ADDR
-h8300_skip_prologue (CORE_ADDR start_pc)
+static void
+h8300_init_frame_cache (struct h8300_frame_cache *cache)
{
- short int w;
- int adjust = 0;
+ int i;
- /* Skip past all push and stm insns. */
- while (1)
- {
- w = read_memory_unsigned_integer (start_pc, 2);
- /* First look for push insns. */
- if (w == 0x0100 || w == 0x0110 || w == 0x0120 || w == 0x0130)
- {
- w = read_memory_unsigned_integer (start_pc + 2, 2);
- adjust = 2;
- }
+ /* Base address. */
+ cache->base = 0;
+ cache->sp_offset = 0;
+ cache->pc = 0;
- if (IS_PUSH (w))
- {
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
- continue;
- }
- adjust = 0;
- break;
- }
+ /* Frameless until proven otherwise. */
+ cache->uses_fp = 0;
- /* Skip past a move to FP, either word or long sized */
- w = read_memory_unsigned_integer (start_pc, 2);
- if (w == 0x0100)
- {
- w = read_memory_unsigned_integer (start_pc + 2, 2);
- adjust += 2;
- }
+ /* Saved registers. We initialize these to -1 since zero is a valid
+ offset (that's where %fp is supposed to be stored). */
+ for (i = 0; i < NUM_REGS; i++)
+ cache->saved_regs[i] = -1;
+}
- if (IS_MOVE_FP (w))
- {
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
- }
+#define IS_MOVB_RnRm(x) (((x) & 0xff88) == 0x0c88)
+#define IS_MOVW_RnRm(x) (((x) & 0xff88) == 0x0d00)
+#define IS_MOVL_RnRm(x) (((x) & 0xff88) == 0x0f80)
+#define IS_MOVB_Rn16_SP(x) (((x) & 0xfff0) == 0x6ee0)
+#define IS_MOVB_EXT(x) ((x) == 0x7860)
+#define IS_MOVB_Rn24_SP(x) (((x) & 0xfff0) == 0x6aa0)
+#define IS_MOVW_Rn16_SP(x) (((x) & 0xfff0) == 0x6fe0)
+#define IS_MOVW_EXT(x) ((x) == 0x78e0)
+#define IS_MOVW_Rn24_SP(x) (((x) & 0xfff0) == 0x6ba0)
+/* Same instructions as mov.w, just prefixed with 0x0100 */
+#define IS_MOVL_PRE(x) ((x) == 0x0100)
+#define IS_MOVL_Rn16_SP(x) (((x) & 0xfff0) == 0x6fe0)
+#define IS_MOVL_EXT(x) ((x) == 0x78e0)
+#define IS_MOVL_Rn24_SP(x) (((x) & 0xfff0) == 0x6ba0)
+
+#define IS_PUSHFP_MOVESPFP(x) ((x) == 0x6df60d76)
+#define IS_PUSH_FP(x) ((x) == 0x01006df6)
+#define IS_MOV_SP_FP(x) ((x) == 0x0ff6)
+#define IS_SUB2_SP(x) ((x) == 0x1b87)
+#define IS_SUB4_SP(x) ((x) == 0x1b97)
+#define IS_ADD_IMM_SP(x) ((x) == 0x7a1f)
+#define IS_SUB_IMM_SP(x) ((x) == 0x7a3f)
+#define IS_SUBL4_SP(x) ((x) == 0x1acf)
+#define IS_MOV_IMM_Rn(x) (((x) & 0xfff0) == 0x7905)
+#define IS_SUB_RnSP(x) (((x) & 0xff0f) == 0x1907)
+#define IS_ADD_RnSP(x) (((x) & 0xff0f) == 0x0907)
+#define IS_PUSH(x) (((x) & 0xfff0) == 0x6df0)
+
+/* If the instruction at PC is an argument register spill, return its
+ length. Otherwise, return zero.
+
+ An argument register spill is an instruction that moves an argument
+ from the register in which it was passed to the stack slot in which
+ it really lives. It is a byte, word, or longword move from an
+ argument register to a negative offset from the frame pointer.
+
+ CV, 2003-06-16: Or, in optimized code or when the `register' qualifier
+ is used, it could be a byte, word or long move to registers r3-r5. */
+
+static int
+h8300_is_argument_spill (CORE_ADDR pc)
+{
+ int w = read_memory_unsigned_integer (pc, 2);
- /* Check for loading either a word constant into r5;
- long versions are handled by the SUBL_SP below. */
- if (IS_MOVK_R5 (w))
- {
- start_pc += 2;
- w = read_memory_unsigned_integer (start_pc, 2);
- }
+ if ((IS_MOVB_RnRm (w) || IS_MOVW_RnRm (w) || IS_MOVL_RnRm (w))
+ && (w & 0x70) <= 0x20 /* Rs is R0, R1 or R2 */
+ && (w & 0x7) >= 0x3 && (w & 0x7) <= 0x5) /* Rd is R3, R4 or R5 */
+ return 2;
- /* Now check for subtracting r5 from sp, word sized only. */
- if (IS_SUB_R5SP (w))
+ if (IS_MOVB_Rn16_SP (w)
+ && 8 <= (w & 0xf) && (w & 0xf) <= 10) /* Rs is R0L, R1L, or R2L */
{
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
+ if (read_memory_integer (pc + 2, 2) < 0) /* ... and d:16 is negative. */
+ return 4;
}
+ else if (IS_MOVB_EXT (w))
+ {
+ if (IS_MOVB_Rn24_SP (read_memory_unsigned_integer (pc + 2, 2)))
+ {
+ LONGEST disp = read_memory_integer (pc + 4, 4);
- /* Check for subs #2 and subs #4. */
- while (IS_SUB2_SP (w) || IS_SUB4_SP (w))
+ /* ... and d:24 is negative. */
+ if (disp < 0 && disp > 0xffffff)
+ return 8;
+ }
+ }
+ else if (IS_MOVW_Rn16_SP (w)
+ && (w & 0xf) <= 2) /* Rs is R0, R1, or R2 */
{
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
+ /* ... and d:16 is negative. */
+ if (read_memory_integer (pc + 2, 2) < 0)
+ return 4;
}
+ else if (IS_MOVW_EXT (w))
+ {
+ if (IS_MOVW_Rn24_SP (read_memory_unsigned_integer (pc + 2, 2)))
+ {
+ LONGEST disp = read_memory_integer (pc + 4, 4);
- /* Check for a 32bit subtract. */
- if (IS_SUBL_SP (w))
- start_pc += 6 + adjust;
-
- return start_pc;
-}
-
-int
-gdb_print_insn_h8300 (bfd_vma memaddr, disassemble_info *info)
-{
- if (h8300smode)
- return print_insn_h8300s (memaddr, info);
- else if (h8300hmode)
- return print_insn_h8300h (memaddr, info);
- else
- return print_insn_h8300 (memaddr, info);
-}
-
-/* Given a GDB frame, determine the address of the calling function's frame.
- This will be used to create a new GDB frame struct, and then
- INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
-
- For us, the frame address is its stack pointer value, so we look up
- the function prologue to determine the caller's sp value, and return it. */
-
-CORE_ADDR
-h8300_frame_chain (struct frame_info *thisframe)
-{
- if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
- { /* initialize the from_pc now */
- thisframe->from_pc = generic_read_register_dummy (thisframe->pc,
- thisframe->frame,
- PC_REGNUM);
- return thisframe->frame;
+ /* ... and d:24 is negative. */
+ if (disp < 0 && disp > 0xffffff)
+ return 8;
+ }
}
- h8300_frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0);
- return thisframe->fsr->regs[SP_REGNUM];
-}
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame.
-
- We cache the result of doing this in the frame_obstack, since it is
- fairly expensive. */
-
-void
-h8300_frame_find_saved_regs (struct frame_info *fi,
- struct frame_saved_regs *fsr)
-{
- register struct frame_saved_regs *cache_fsr;
- CORE_ADDR ip;
- struct symtab_and_line sal;
- CORE_ADDR limit;
-
- if (!fi->fsr)
+ else if (IS_MOVL_PRE (w))
{
- cache_fsr = (struct frame_saved_regs *)
- frame_obstack_alloc (sizeof (struct frame_saved_regs));
- memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
-
- fi->fsr = cache_fsr;
+ int w2 = read_memory_integer (pc + 2, 2);
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- { /* no more to do. */
- if (fsr)
- *fsr = *fi->fsr;
- return;
+ if (IS_MOVL_Rn16_SP (w2)
+ && (w2 & 0xf) <= 2) /* Rs is ER0, ER1, or ER2 */
+ {
+ /* ... and d:16 is negative. */
+ if (read_memory_integer (pc + 4, 2) < 0)
+ return 6;
}
- /* Find the start and end of the function prologue. If the PC
- is in the function prologue, we only consider the part that
- has executed already. */
+ else if (IS_MOVL_EXT (w2))
+ {
+ int w3 = read_memory_integer (pc + 4, 2);
- ip = get_pc_function_start (fi->pc);
- sal = find_pc_line (ip, 0);
- limit = (sal.end && sal.end < fi->pc) ? sal.end : fi->pc;
+ if (IS_MOVL_Rn24_SP (read_memory_integer (pc + 4, 2)))
+ {
+ LONGEST disp = read_memory_integer (pc + 6, 4);
- /* This will fill in fields in *fi as well as in cache_fsr. */
- examine_prologue (ip, limit, fi->frame, cache_fsr, fi);
+ /* ... and d:24 is negative. */
+ if (disp < 0 && disp > 0xffffff)
+ return 10;
+ }
+ }
}
- if (fsr)
- *fsr = *fi->fsr;
+ return 0;
}
-/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
- is not the address of a valid instruction, the address of the next
- instruction beyond ADDR otherwise. *PWORD1 receives the first word
- of the instruction. */
+/* Do a full analysis of the prologue at PC and update CACHE
+ accordingly. Bail out early if CURRENT_PC is reached. Return the
+ address where the analysis stopped.
-CORE_ADDR
-NEXT_PROLOGUE_INSN (CORE_ADDR addr, CORE_ADDR lim, INSN_WORD *pword1)
-{
- char buf[2];
- if (addr < lim + 8)
- {
- read_memory (addr, buf, 2);
- *pword1 = extract_signed_integer (buf, 2);
+ We handle all cases that can be generated by gcc.
- return addr + 2;
- }
- return 0;
-}
+ For allocating a stack frame:
-/* Examine the prologue of a function. `ip' points to the first instruction.
- `limit' is the limit of the prologue (e.g. the addr of the first
- linenumber, or perhaps the program counter if we're stepping through).
- `frame_sp' is the stack pointer value in use in this frame.
- `fsr' is a pointer to a frame_saved_regs structure into which we put
- info about the registers saved by this frame.
- `fi' is a struct frame_info pointer; we fill in various fields in it
- to reflect the offsets of the arg pointer and the locals pointer. */
+ mov.w r6,@-sp
+ mov.w sp,r6
+ mov.w #-n,rN
+ add.w rN,sp
-static CORE_ADDR
-examine_prologue (register CORE_ADDR ip, register CORE_ADDR limit,
- CORE_ADDR after_prolog_fp, struct frame_saved_regs *fsr,
- struct frame_info *fi)
-{
- register CORE_ADDR next_ip;
- int r;
- int have_fp = 0;
- INSN_WORD insn_word;
- /* Number of things pushed onto stack, starts at 2/4, 'cause the
- PC is already there */
- unsigned int reg_save_depth = h8300hmode ? 4 : 2;
+ mov.w r6,@-sp
+ mov.w sp,r6
+ subs #2,sp
+ (repeat)
- unsigned int auto_depth = 0; /* Number of bytes of autos */
+ mov.l er6,@-sp
+ mov.l sp,er6
+ add.l #-n,sp
- char in_frame[11]; /* One for each reg */
+ mov.w r6,@-sp
+ mov.w sp,r6
+ subs #4,sp
+ (repeat)
- int adjust = 0;
+ For saving registers:
- memset (in_frame, 1, 11);
- for (r = 0; r < 8; r++)
- {
- fsr->regs[r] = 0;
- }
- if (after_prolog_fp == 0)
- {
- after_prolog_fp = read_register (SP_REGNUM);
- }
+ mov.w rN,@-sp
+ mov.l erN,@-sp
+ stm.l reglist,@-sp
- /* If the PC isn't valid, quit now. */
- if (ip == 0 || ip & (h8300hmode ? ~0xffffff : ~0xffff))
- return 0;
+ */
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+static CORE_ADDR
+h8300_analyze_prologue (CORE_ADDR pc, CORE_ADDR current_pc,
+ struct h8300_frame_cache *cache)
+{
+ unsigned int op;
+ int regno, i, spill_size;
- if (insn_word == 0x0100)
- {
- insn_word = read_memory_unsigned_integer (ip + 2, 2);
- adjust = 2;
- }
+ cache->sp_offset = 0;
- /* Skip over any fp push instructions */
- fsr->regs[6] = after_prolog_fp;
- while (next_ip && IS_PUSH_FP (insn_word))
- {
- ip = next_ip + adjust;
+ if (pc >= current_pc)
+ return current_pc;
- in_frame[insn_word & 0x7] = reg_save_depth;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- reg_save_depth += 2 + adjust;
- }
+ op = read_memory_unsigned_integer (pc, 4);
- /* Is this a move into the fp */
- if (next_ip && IS_MOV_SP_FP (insn_word))
+ if (IS_PUSHFP_MOVESPFP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- have_fp = 1;
+ cache->saved_regs[E_FP_REGNUM] = 0;
+ cache->uses_fp = 1;
+ pc += 4;
}
-
- /* Skip over any stack adjustment, happens either with a number of
- sub#2,sp or a mov #x,r5 sub r5,sp */
-
- if (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+ else if (IS_PUSH_FP (op))
{
- while (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+ cache->saved_regs[E_FP_REGNUM] = 0;
+ pc += 4;
+ if (pc >= current_pc)
+ return current_pc;
+ op = read_memory_unsigned_integer (pc, 2);
+ if (IS_MOV_SP_FP (op))
{
- auto_depth += IS_SUB2_SP (insn_word) ? 2 : 4;
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ cache->uses_fp = 1;
+ pc += 2;
}
}
- else
+
+ while (pc < current_pc)
{
- if (next_ip && IS_MOVK_R5 (insn_word))
+ op = read_memory_unsigned_integer (pc, 2);
+ if (IS_SUB2_SP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- auto_depth += insn_word;
-
- next_ip = NEXT_PROLOGUE_INSN (next_ip, limit, &insn_word);
- auto_depth += insn_word;
+ cache->sp_offset += 2;
+ pc += 2;
}
- if (next_ip && IS_SUBL_SP (insn_word))
+ else if (IS_SUB4_SP (op))
{
- ip = next_ip;
- auto_depth += read_memory_unsigned_integer (ip, 4);
- ip += 4;
-
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ cache->sp_offset += 4;
+ pc += 2;
}
- }
-
- /* Now examine the push insns to determine where everything lives
- on the stack. */
- while (1)
- {
- adjust = 0;
- if (!next_ip)
- break;
-
- if (insn_word == 0x0100)
+ else if (IS_ADD_IMM_SP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- adjust = 2;
+ cache->sp_offset += -read_memory_integer (pc + 2, 2);
+ pc += 4;
}
-
- if (IS_PUSH (insn_word))
+ else if (IS_SUB_IMM_SP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- fsr->regs[r] = after_prolog_fp + auto_depth;
- auto_depth += 2 + adjust;
- continue;
+ cache->sp_offset += read_memory_integer (pc + 2, 2);
+ pc += 4;
}
-
- /* Now check for push multiple insns. */
- if (insn_word == 0x0110 || insn_word == 0x0120 || insn_word == 0x0130)
+ else if (IS_SUBL4_SP (op))
{
- int count = ((insn_word >> 4) & 0xf) + 1;
- int start, i;
-
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- start = insn_word & 0x7;
-
- for (i = start; i <= start + count; i++)
+ cache->sp_offset += 4;
+ pc += 2;
+ }
+ else if (IS_MOV_IMM_Rn (op))
+ {
+ int offset = read_memory_integer (pc + 2, 2);
+ regno = op & 0x000f;
+ op = read_memory_unsigned_integer (pc + 4, 2);
+ if (IS_ADD_RnSP (op) && (op & 0x00f0) == regno)
{
- fsr->regs[i] = after_prolog_fp + auto_depth;
- auto_depth += 4;
+ cache->sp_offset -= offset;
+ pc += 6;
}
+ else if (IS_SUB_RnSP (op) && (op & 0x00f0) == regno)
+ {
+ cache->sp_offset += offset;
+ pc += 6;
+ }
+ else
+ break;
}
- break;
+ else if (IS_PUSH (op))
+ {
+ regno = op & 0x000f;
+ cache->sp_offset += 2;
+ cache->saved_regs[regno] = cache->sp_offset;
+ pc += 2;
+ }
+ else if (op == 0x0100)
+ {
+ op = read_memory_unsigned_integer (pc + 2, 2);
+ if (IS_PUSH (op))
+ {
+ regno = op & 0x000f;
+ cache->sp_offset += 4;
+ cache->saved_regs[regno] = cache->sp_offset;
+ pc += 4;
+ }
+ else
+ break;
+ }
+ else if ((op & 0xffcf) == 0x0100)
+ {
+ int op1;
+ op1 = read_memory_unsigned_integer (pc + 2, 2);
+ if (IS_PUSH (op1))
+ {
+ /* Since the prefix is 0x01x0, this is not a simple pushm but a
+ stm.l reglist,@-sp */
+ i = ((op & 0x0030) >> 4) + 1;
+ regno = op1 & 0x000f;
+ for (; i > 0; regno++, --i)
+ {
+ cache->sp_offset += 4;
+ cache->saved_regs[regno] = cache->sp_offset;
+ }
+ pc += 4;
+ }
+ else
+ break;
+ }
+ else
+ break;
}
- /* The args are always reffed based from the stack pointer */
- fi->args_pointer = after_prolog_fp;
- /* Locals are always reffed based from the fp */
- fi->locals_pointer = after_prolog_fp;
- /* The PC is at a known place */
- fi->from_pc = read_memory_unsigned_integer (after_prolog_fp + BINWORD, BINWORD);
+ /* Check for spilling an argument register to the stack frame.
+ This could also be an initializing store from non-prologue code,
+ but I don't think there's any harm in skipping that. */
+ while ((spill_size = h8300_is_argument_spill (pc)) > 0
+ && pc + spill_size <= current_pc)
+ pc += spill_size;
- /* Rememeber any others too */
- in_frame[PC_REGNUM] = 0;
+ return pc;
+}
- if (have_fp)
- /* We keep the old FP in the SP spot */
- fsr->regs[SP_REGNUM] = read_memory_unsigned_integer (fsr->regs[6], BINWORD);
- else
- fsr->regs[SP_REGNUM] = after_prolog_fp + auto_depth;
+static struct h8300_frame_cache *
+h8300_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ struct h8300_frame_cache *cache;
+ char buf[4];
+ int i;
+ CORE_ADDR current_pc;
- return (ip);
-}
+ if (*this_cache)
+ return *this_cache;
-void
-h8300_init_extra_frame_info (int fromleaf, struct frame_info *fi)
-{
- fi->fsr = 0; /* Not yet allocated */
- fi->args_pointer = 0; /* Unknown */
- fi->locals_pointer = 0; /* Unknown */
- fi->from_pc = 0;
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- { /* anything special to do? */
- return;
- }
-}
+ cache = FRAME_OBSTACK_ZALLOC (struct h8300_frame_cache);
+ h8300_init_frame_cache (cache);
+ *this_cache = cache;
-/* Return the saved PC from this frame.
+ /* In principle, for normal frames, %fp holds the frame pointer,
+ which holds the base address for the current stack frame.
+ However, for functions that don't need it, the frame pointer is
+ optional. For these "frameless" functions the frame pointer is
+ actually the frame pointer of the calling frame. */
- If the frame has a memory copy of SRP_REGNUM, use that. If not,
- just use the register SRP_REGNUM itself. */
+ cache->base = frame_unwind_register_unsigned (next_frame, E_FP_REGNUM);
+ if (cache->base == 0)
+ return cache;
-CORE_ADDR
-h8300_frame_saved_pc (struct frame_info *frame)
-{
- if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
- return generic_read_register_dummy (frame->pc, frame->frame, PC_REGNUM);
- else
- return frame->from_pc;
-}
+ cache->saved_regs[E_PC_REGNUM] = -BINWORD;
-CORE_ADDR
-h8300_frame_locals_address (struct frame_info *fi)
-{
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return (CORE_ADDR) 0; /* Not sure what else to do... */
- if (!fi->locals_pointer)
+ cache->pc = frame_func_unwind (next_frame);
+ current_pc = frame_pc_unwind (next_frame);
+ if (cache->pc != 0)
+ h8300_analyze_prologue (cache->pc, current_pc, cache);
+
+ if (!cache->uses_fp)
{
- struct frame_saved_regs ignore;
+ /* We didn't find a valid frame, which means that CACHE->base
+ currently holds the frame pointer for our calling frame. If
+ we're at the start of a function, or somewhere half-way its
+ prologue, the function's frame probably hasn't been fully
+ setup yet. Try to reconstruct the base address for the stack
+ frame by looking at the stack pointer. For truly "frameless"
+ functions this might work too. */
+
+ cache->base = frame_unwind_register_unsigned (next_frame, E_SP_REGNUM)
+ + cache->sp_offset;
+ cache->saved_sp = cache->base + BINWORD;
+ cache->saved_regs[E_PC_REGNUM] = 0;
+ }
+ else
+ {
+ cache->saved_sp = cache->base + 2 * BINWORD;
+ cache->saved_regs[E_PC_REGNUM] = -BINWORD;
+ }
- get_frame_saved_regs (fi, &ignore);
+ /* Adjust all the saved registers such that they contain addresses
+ instead of offsets. */
+ for (i = 0; i < NUM_REGS; i++)
+ if (cache->saved_regs[i] != -1)
+ cache->saved_regs[i] = cache->base - cache->saved_regs[i];
- }
- return fi->locals_pointer;
+ return cache;
}
-/* Return the address of the argument block for the frame
- described by FI. Returns 0 if the address is unknown. */
-
-CORE_ADDR
-h8300_frame_args_address (struct frame_info *fi)
+static void
+h8300_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return (CORE_ADDR) 0; /* Not sure what else to do... */
- if (!fi->args_pointer)
- {
- struct frame_saved_regs ignore;
-
- get_frame_saved_regs (fi, &ignore);
+ struct h8300_frame_cache *cache =
+ h8300_frame_cache (next_frame, this_cache);
- }
+ /* This marks the outermost frame. */
+ if (cache->base == 0)
+ return;
- return fi->args_pointer;
+ *this_id = frame_id_build (cache->saved_sp, cache->pc);
}
-/* Function: push_arguments
- Setup the function arguments for calling a function in the inferior.
-
- On the Hitachi H8/300 architecture, there are three registers (R0 to R2)
- which are dedicated for passing function arguments. Up to the first
- three arguments (depending on size) may go into these registers.
- The rest go on the stack.
-
- Arguments that are smaller than WORDSIZE bytes will still take up a
- whole register or a whole WORDSIZE word on the stack, and will be
- right-justified in the register or the stack word. This includes
- chars and small aggregate types. Note that WORDSIZE depends on the
- cpu type.
-
- Arguments that are larger than WORDSIZE bytes will be split between
- two or more registers as available, but will NOT be split between a
- register and the stack.
-
- An exceptional case exists for struct arguments (and possibly other
- aggregates such as arrays) -- if the size is larger than WORDSIZE
- bytes but not a multiple of WORDSIZE bytes. In this case the
- argument is never split between the registers and the stack, but
- instead is copied in its entirety onto the stack, AND also copied
- into as many registers as there is room for. In other words, space
- in registers permitting, two copies of the same argument are passed
- in. As far as I can tell, only the one on the stack is used,
- although that may be a function of the level of compiler
- optimization. I suspect this is a compiler bug. Arguments of
- these odd sizes are left-justified within the word (as opposed to
- arguments smaller than WORDSIZE bytes, which are right-justified).
-
- If the function is to return an aggregate type such as a struct,
- the caller must allocate space into which the callee will copy the
- return value. In this case, a pointer to the return value location
- is passed into the callee in register R0, which displaces one of
- the other arguments passed in via registers R0 to R2. */
-
-CORE_ADDR
-h8300_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- unsigned char struct_return, CORE_ADDR struct_addr)
-{
- int stack_align, stack_alloc, stack_offset;
- int wordsize;
- int argreg;
- int argnum;
- struct type *type;
- CORE_ADDR regval;
- char *val;
- char valbuf[4];
- int len;
-
- if (h8300hmode || h8300smode)
- {
- stack_align = 3;
- wordsize = 4;
- }
- else
- {
- stack_align = 1;
- wordsize = 2;
- }
-
- /* first force sp to a n-byte alignment */
- sp = sp & ~stack_align;
+static void
+h8300_frame_prev_register (struct frame_info *next_frame, void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, void *valuep)
+{
+ struct h8300_frame_cache *cache =
+ h8300_frame_cache (next_frame, this_cache);
- /* Now make sure there's space on the stack */
- for (argnum = 0, stack_alloc = 0;
- argnum < nargs; argnum++)
- stack_alloc += ((TYPE_LENGTH (VALUE_TYPE (args[argnum])) + stack_align)
- & ~stack_align);
- sp -= stack_alloc; /* make room on stack for args */
- /* we may over-allocate a little here, but that won't hurt anything */
+ gdb_assert (regnum >= 0);
- argreg = ARG0_REGNUM;
- if (struct_return) /* "struct return" pointer takes up one argreg */
+ if (regnum == E_SP_REGNUM && cache->saved_sp)
{
- write_register (argreg++, struct_addr);
+ *optimizedp = 0;
+ *lvalp = not_lval;
+ *addrp = 0;
+ *realnump = -1;
+ if (valuep)
+ store_unsigned_integer (valuep, BINWORD, cache->saved_sp);
+ return;
}
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. There are 3N bytes
- in three registers available. Loop thru args from first to last. */
-
- for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+ if (regnum < NUM_REGS && cache->saved_regs[regnum] != -1)
{
- type = VALUE_TYPE (args[argnum]);
- len = TYPE_LENGTH (type);
- memset (valbuf, 0, sizeof (valbuf));
- if (len < wordsize)
- {
- /* the purpose of this is to right-justify the value within the word */
- memcpy (valbuf + (wordsize - len),
- (char *) VALUE_CONTENTS (args[argnum]), len);
- val = valbuf;
- }
- else
- val = (char *) VALUE_CONTENTS (args[argnum]);
-
- if (len > (ARGLAST_REGNUM + 1 - argreg) * REGISTER_RAW_SIZE (ARG0_REGNUM) ||
- (len > wordsize && (len & stack_align) != 0))
- { /* passed on the stack */
- write_memory (sp + stack_offset, val,
- len < wordsize ? wordsize : len);
- stack_offset += (len + stack_align) & ~stack_align;
- }
- /* NOTE WELL!!!!! This is not an "else if" clause!!!
- That's because some *&^%$ things get passed on the stack
- AND in the registers! */
- if (len <= (ARGLAST_REGNUM + 1 - argreg) * REGISTER_RAW_SIZE (ARG0_REGNUM))
- while (len > 0)
- { /* there's room in registers */
- regval = extract_address (val, wordsize);
- write_register (argreg, regval);
- len -= wordsize;
- val += wordsize;
- argreg++;
- }
+ *optimizedp = 0;
+ *lvalp = lval_memory;
+ *addrp = cache->saved_regs[regnum];
+ *realnump = -1;
+ if (valuep)
+ read_memory (*addrp, valuep, register_size (current_gdbarch, regnum));
+ return;
}
- return sp;
+
+ frame_register_unwind (next_frame, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
-/* Function: push_return_address
- Setup the return address for a dummy frame, as called by
- call_function_by_hand. Only necessary when you are using an
- empty CALL_DUMMY, ie. the target will not actually be executing
- a JSR/BSR instruction. */
+static const struct frame_unwind h8300_frame_unwind = {
+ NORMAL_FRAME,
+ h8300_frame_this_id,
+ h8300_frame_prev_register
+};
-CORE_ADDR
-h8300_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+static const struct frame_unwind *
+h8300_frame_sniffer (struct frame_info *next_frame)
{
- unsigned char buf[4];
- int wordsize;
-
- if (h8300hmode || h8300smode)
- wordsize = 4;
- else
- wordsize = 2;
+ return &h8300_frame_unwind;
+}
- sp -= wordsize;
- store_unsigned_integer (buf, wordsize, CALL_DUMMY_ADDRESS ());
- write_memory (sp, buf, wordsize);
- return sp;
+static CORE_ADDR
+h8300_frame_base_address (struct frame_info *next_frame, void **this_cache)
+{
+ struct h8300_frame_cache *cache = h8300_frame_cache (next_frame, this_cache);
+ return cache->base;
}
-/* Function: h8300_pop_frame
- Restore the machine to the state it had before the current frame
- was created. Usually used either by the "RETURN" command, or by
- call_function_by_hand after the dummy_frame is finished. */
+static const struct frame_base h8300_frame_base = {
+ &h8300_frame_unwind,
+ h8300_frame_base_address,
+ h8300_frame_base_address,
+ h8300_frame_base_address
+};
-void
-h8300_pop_frame (void)
+static CORE_ADDR
+h8300_skip_prologue (CORE_ADDR pc)
{
- unsigned regnum;
- struct frame_saved_regs fsr;
- struct frame_info *frame = get_current_frame ();
+ CORE_ADDR func_addr = 0 , func_end = 0;
- if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
- generic_pop_dummy_frame ();
+ struct symtab_and_line sal;
+ struct h8300_frame_cache cache;
+
+ /* Found a function. */
+ sal = find_pc_line (func_addr, 0);
+ if (sal.end && sal.end < func_end)
+ /* Found a line number, use it as end of prologue. */
+ return sal.end;
+
+ /* No useable line symbol. Use prologue parsing method. */
+ h8300_init_frame_cache (&cache);
+ return h8300_analyze_prologue (func_addr, func_end, &cache);
}
- else
+
+ /* No function symbol -- just return the PC. */
+ return (CORE_ADDR) pc;
+}
+
+/* Function: push_dummy_call
+ Setup the function arguments for calling a function in the inferior.
+ In this discussion, a `word' is 16 bits on the H8/300s, and 32 bits
+ on the H8/300H.
+
+ There are actually two ABI's here: -mquickcall (the default) and
+ -mno-quickcall. With -mno-quickcall, all arguments are passed on
+ the stack after the return address, word-aligned. With
+ -mquickcall, GCC tries to use r0 -- r2 to pass registers. Since
+ GCC doesn't indicate in the object file which ABI was used to
+ compile it, GDB only supports the default --- -mquickcall.
+
+ Here are the rules for -mquickcall, in detail:
+
+ Each argument, whether scalar or aggregate, is padded to occupy a
+ whole number of words. Arguments smaller than a word are padded at
+ the most significant end; those larger than a word are padded at
+ the least significant end.
+
+ The initial arguments are passed in r0 -- r2. Earlier arguments go in
+ lower-numbered registers. Multi-word arguments are passed in
+ consecutive registers, with the most significant end in the
+ lower-numbered register.
+
+ If an argument doesn't fit entirely in the remaining registers, it
+ is passed entirely on the stack. Stack arguments begin just after
+ the return address. Once an argument has overflowed onto the stack
+ this way, all subsequent arguments are passed on the stack.
+
+ The above rule has odd consequences. For example, on the h8/300s,
+ if a function takes two longs and an int as arguments:
+ - the first long will be passed in r0/r1,
+ - the second long will be passed entirely on the stack, since it
+ doesn't fit in r2,
+ - and the int will be passed on the stack, even though it could fit
+ in r2.
+
+ A weird exception: if an argument is larger than a word, but not a
+ whole number of words in length (before padding), it is passed on
+ the stack following the rules for stack arguments above, even if
+ there are sufficient registers available to hold it. Stranger
+ still, the argument registers are still `used up' --- even though
+ there's nothing in them.
+
+ So, for example, on the h8/300s, if a function expects a three-byte
+ structure and an int, the structure will go on the stack, and the
+ int will go in r2, not r0.
+
+ If the function returns an aggregate type (struct, union, or class)
+ by value, the caller must allocate space to hold the return value,
+ and pass the callee a pointer to this space as an invisible first
+ argument, in R0.
+
+ For varargs functions, the last fixed argument and all the variable
+ arguments are always passed on the stack. This means that calls to
+ varargs functions don't work properly unless there is a prototype
+ in scope.
+
+ Basically, this ABI is not good, for the following reasons:
+ - You can't call vararg functions properly unless a prototype is in scope.
+ - Structure passing is inconsistent, to no purpose I can see.
+ - It often wastes argument registers, of which there are only three
+ to begin with. */
+
+static CORE_ADDR
+h8300_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int stack_alloc = 0, stack_offset = 0;
+ int wordsize = BINWORD;
+ int reg = E_ARG0_REGNUM;
+ int argument;
+
+ /* First, make sure the stack is properly aligned. */
+ sp = align_down (sp, wordsize);
+
+ /* Now make sure there's space on the stack for the arguments. We
+ may over-allocate a little here, but that won't hurt anything. */
+ for (argument = 0; argument < nargs; argument++)
+ stack_alloc += align_up (TYPE_LENGTH (value_type (args[argument])),
+ wordsize);
+ sp -= stack_alloc;
+
+ /* Now load as many arguments as possible into registers, and push
+ the rest onto the stack.
+ If we're returning a structure by value, then we must pass a
+ pointer to the buffer for the return value as an invisible first
+ argument. */
+ if (struct_return)
+ regcache_cooked_write_unsigned (regcache, reg++, struct_addr);
+
+ for (argument = 0; argument < nargs; argument++)
{
- get_frame_saved_regs (frame, &fsr);
+ struct type *type = value_type (args[argument]);
+ int len = TYPE_LENGTH (type);
+ char *contents = (char *) value_contents (args[argument]);
+
+ /* Pad the argument appropriately. */
+ int padded_len = align_up (len, wordsize);
+ char *padded = alloca (padded_len);
+
+ memset (padded, 0, padded_len);
+ memcpy (len < wordsize ? padded + padded_len - len : padded,
+ contents, len);
- for (regnum = 0; regnum < 8; regnum++)
+ /* Could the argument fit in the remaining registers? */
+ if (padded_len <= (E_ARGLAST_REGNUM - reg + 1) * wordsize)
{
- /* Don't forget SP_REGNUM is a frame_saved_regs struct is the
- actual value we want, not the address of the value we want. */
- if (fsr.regs[regnum] && regnum != SP_REGNUM)
- write_register (regnum,
- read_memory_integer (fsr.regs[regnum], BINWORD));
- else if (fsr.regs[regnum] && regnum == SP_REGNUM)
- write_register (regnum, frame->frame + 2 * BINWORD);
+ /* Are we going to pass it on the stack anyway, for no good
+ reason? */
+ if (len > wordsize && len % wordsize)
+ {
+ /* I feel so unclean. */
+ write_memory (sp + stack_offset, padded, padded_len);
+ stack_offset += padded_len;
+
+ /* That's right --- even though we passed the argument
+ on the stack, we consume the registers anyway! Love
+ me, love my dog. */
+ reg += padded_len / wordsize;
+ }
+ else
+ {
+ /* Heavens to Betsy --- it's really going in registers!
+ It would be nice if we could use write_register_bytes
+ here, but on the h8/300s, there are gaps between
+ the registers in the register file. */
+ int offset;
+
+ for (offset = 0; offset < padded_len; offset += wordsize)
+ {
+ ULONGEST word = extract_unsigned_integer (padded + offset,
+ wordsize);
+ regcache_cooked_write_unsigned (regcache, reg++, word);
+ }
+ }
}
+ else
+ {
+ /* It doesn't fit in registers! Onto the stack it goes. */
+ write_memory (sp + stack_offset, padded, padded_len);
+ stack_offset += padded_len;
- /* Don't forget the update the PC too! */
- write_pc (frame->from_pc);
+ /* Once one argument has spilled onto the stack, all
+ subsequent arguments go on the stack. */
+ reg = E_ARGLAST_REGNUM + 1;
+ }
}
- flush_cached_frames ();
+
+ /* Store return address. */
+ sp -= wordsize;
+ write_memory_unsigned_integer (sp, wordsize, bp_addr);
+
+ /* Update stack pointer. */
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
+
+ /* Return the new stack pointer minus the return address slot since
+ that's what DWARF2/GCC uses as the frame's CFA. */
+ return sp + wordsize;
}
/* Function: extract_return_value
Figure out where in REGBUF the called function has left its return value.
Copy that into VALBUF. Be sure to account for CPU type. */
-void
-h8300_extract_return_value (struct type *type, char *regbuf, char *valbuf)
+static void
+h8300_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
{
- int wordsize, len;
-
- if (h8300smode || h8300hmode)
- wordsize = 4;
- else
- wordsize = 2;
-
- len = TYPE_LENGTH (type);
+ int len = TYPE_LENGTH (type);
+ ULONGEST c, addr;
switch (len)
{
- case 1: /* (char) */
- case 2: /* (short), (int) */
- memcpy (valbuf, regbuf + REGISTER_BYTE (0) + (wordsize - len), len);
+ case 1:
+ case 2:
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, len, c);
+ break;
+ case 4: /* Needs two registers on plain H8/300 */
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, 2, c);
+ regcache_cooked_read_unsigned (regcache, E_RET1_REGNUM, &c);
+ store_unsigned_integer ((void *) ((char *) valbuf + 2), 2, c);
break;
- case 4: /* (long), (float) */
- if (h8300smode || h8300hmode)
+ case 8: /* long long is now 8 bytes. */
+ if (TYPE_CODE (type) == TYPE_CODE_INT)
{
- memcpy (valbuf, regbuf + REGISTER_BYTE (0), 4);
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &addr);
+ c = read_memory_unsigned_integer ((CORE_ADDR) addr, len);
+ store_unsigned_integer (valbuf, len, c);
}
else
{
- memcpy (valbuf, regbuf + REGISTER_BYTE (0), 2);
- memcpy (valbuf + 2, regbuf + REGISTER_BYTE (1), 2);
+ error ("I don't know how this 8 byte value is returned.");
}
break;
- case 8: /* (double) (doesn't seem to happen, which is good,
- because this almost certainly isn't right. */
- error ("I don't know how a double is returned.");
- break;
}
}
-/* Function: store_return_value
- Place the appropriate value in the appropriate registers.
- Primarily used by the RETURN command. */
-
-void
-h8300_store_return_value (struct type *type, char *valbuf)
+static void
+h8300h_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
{
- int wordsize, len, regval;
-
- if (h8300hmode || h8300smode)
- wordsize = 4;
- else
- wordsize = 2;
+ int len = TYPE_LENGTH (type);
+ ULONGEST c, addr;
- len = TYPE_LENGTH (type);
switch (len)
{
- case 1: /* char */
- case 2: /* short, int */
- regval = extract_address (valbuf, len);
- write_register (0, regval);
+ case 1:
+ case 2:
+ case 4:
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, len, c);
break;
- case 4: /* long, float */
- regval = extract_address (valbuf, len);
- if (h8300smode || h8300hmode)
+ case 8: /* long long is now 8 bytes. */
+ if (TYPE_CODE (type) == TYPE_CODE_INT)
{
- write_register (0, regval);
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, 4, c);
+ regcache_cooked_read_unsigned (regcache, E_RET1_REGNUM, &c);
+ store_unsigned_integer ((void *) ((char *) valbuf + 4), 4, c);
}
else
{
- write_register (0, regval >> 16);
- write_register (1, regval & 0xffff);
+ error ("I don't know how this 8 byte value is returned.");
}
break;
- case 8: /* presumeably double, but doesn't seem to happen */
- error ("I don't know how to return a double.");
- break;
}
}
-struct cmd_list_element *setmemorylist;
-
-static void
-set_register_names (void)
+int
+h8300_use_struct_convention (struct type *value_type)
{
- if (h8300hmode != 0)
- h8300_register_names = h8300h_register_names;
- else
- h8300_register_names = original_register_names;
+ /* Types of 1, 2 or 4 bytes are returned in R0/R1, everything else on the
+ stack. */
+
+ if (TYPE_CODE (value_type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (value_type) == TYPE_CODE_UNION)
+ return 1;
+ return !(TYPE_LENGTH (value_type) == 1
+ || TYPE_LENGTH (value_type) == 2
+ || TYPE_LENGTH (value_type) == 4);
}
-static void
-h8300_command (char *args, int from_tty)
+int
+h8300h_use_struct_convention (struct type *value_type)
{
- extern int h8300hmode;
- h8300hmode = 0;
- h8300smode = 0;
- set_register_names ();
+ /* Types of 1, 2 or 4 bytes are returned in R0, INT types of 8 bytes are
+ returned in R0/R1, everything else on the stack. */
+ if (TYPE_CODE (value_type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (value_type) == TYPE_CODE_UNION)
+ return 1;
+ return !(TYPE_LENGTH (value_type) == 1
+ || TYPE_LENGTH (value_type) == 2
+ || TYPE_LENGTH (value_type) == 4
+ || (TYPE_LENGTH (value_type) == 8
+ && TYPE_CODE (value_type) == TYPE_CODE_INT));
}
-static void
-h8300h_command (char *args, int from_tty)
-{
- extern int h8300hmode;
- h8300hmode = 1;
- h8300smode = 0;
- set_register_names ();
-}
+/* Function: store_return_value
+ Place the appropriate value in the appropriate registers.
+ Primarily used by the RETURN command. */
static void
-h8300s_command (char *args, int from_tty)
+h8300_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
{
- extern int h8300smode;
- extern int h8300hmode;
- h8300smode = 1;
- h8300hmode = 1;
- set_register_names ();
-}
-
+ int len = TYPE_LENGTH (type);
+ ULONGEST val;
-static void
-set_machine (char *args, int from_tty)
-{
- printf_unfiltered ("\"set machine\" must be followed by h8300, h8300h");
- printf_unfiltered ("or h8300s");
- help_list (setmemorylist, "set memory ", -1, gdb_stdout);
+ switch (len)
+ {
+ case 1:
+ case 2: /* short... */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM, val);
+ break;
+ case 4: /* long, float */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM,
+ (val >> 16) & 0xffff);
+ regcache_cooked_write_unsigned (regcache, E_RET1_REGNUM, val & 0xffff);
+ break;
+ case 8: /* long long, double and long double are all defined
+ as 4 byte types so far so this shouldn't happen. */
+ error ("I don't know how to return an 8 byte value.");
+ break;
+ }
}
-/* set_machine_hook is called as the exec file is being opened, but
- before the symbol file is opened. This allows us to set the
- h8300hmode flag based on the machine type specified in the exec
- file. This in turn will cause subsequently defined pointer types
- to be 16 or 32 bits as appropriate for the machine. */
-
static void
-set_machine_hook (char *filename)
+h8300h_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
{
- if (bfd_get_mach (exec_bfd) == bfd_mach_h8300s)
- {
- h8300smode = 1;
- h8300hmode = 1;
- }
- else if (bfd_get_mach (exec_bfd) == bfd_mach_h8300h)
- {
- h8300smode = 0;
- h8300hmode = 1;
- }
- else
+ int len = TYPE_LENGTH (type);
+ ULONGEST val;
+
+ switch (len)
{
- h8300smode = 0;
- h8300hmode = 0;
+ case 1:
+ case 2:
+ case 4: /* long, float */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM, val);
+ break;
+ case 8:
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM,
+ (val >> 32) & 0xffffffff);
+ regcache_cooked_write_unsigned (regcache, E_RET1_REGNUM,
+ val & 0xffffffff);
+ break;
}
- set_register_names ();
}
-void
-_initialize_h8300m (void)
+static enum return_value_convention
+h8300_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ void *readbuf, const void *writebuf)
{
- add_prefix_cmd ("machine", no_class, set_machine,
- "set the machine type",
- &setmemorylist, "set machine ", 0,
- &setlist);
+ if (h8300_use_struct_convention (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ if (writebuf)
+ h8300_store_return_value (type, regcache, writebuf);
+ else if (readbuf)
+ h8300_extract_return_value (type, regcache, readbuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
- add_cmd ("h8300", class_support, h8300_command,
- "Set machine to be H8/300.", &setmemorylist);
+static enum return_value_convention
+h8300h_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ void *readbuf, const void *writebuf)
+{
+ if (h8300h_use_struct_convention (type))
+ {
+ if (readbuf)
+ {
+ ULONGEST addr;
- add_cmd ("h8300h", class_support, h8300h_command,
- "Set machine to be H8/300H.", &setmemorylist);
+ regcache_raw_read_unsigned (regcache, E_R0_REGNUM, &addr);
+ read_memory (addr, readbuf, TYPE_LENGTH (type));
+ }
- add_cmd ("h8300s", class_support, h8300s_command,
- "Set machine to be H8/300S.", &setmemorylist);
+ return RETURN_VALUE_ABI_RETURNS_ADDRESS;
+ }
+ if (writebuf)
+ h8300h_store_return_value (type, regcache, writebuf);
+ else if (readbuf)
+ h8300h_extract_return_value (type, regcache, readbuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
- /* Add a hook to set the machine type when we're loading a file. */
+static struct cmd_list_element *setmachinelist;
- specify_exec_file_hook (set_machine_hook);
+static const char *
+h8300_register_name (int regno)
+{
+ /* The register names change depending on which h8300 processor
+ type is selected. */
+ static char *register_names[] = {
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6",
+ "sp", "", "pc", "cycles", "tick", "inst",
+ "ccr", /* pseudo register */
+ };
+ if (regno < 0
+ || regno >= (sizeof (register_names) / sizeof (*register_names)))
+ internal_error (__FILE__, __LINE__,
+ "h8300_register_name: illegal register number %d", regno);
+ else
+ return register_names[regno];
}
+static const char *
+h8300s_register_name (int regno)
+{
+ static char *register_names[] = {
+ "er0", "er1", "er2", "er3", "er4", "er5", "er6",
+ "sp", "", "pc", "cycles", "", "tick", "inst",
+ "mach", "macl",
+ "ccr", "exr" /* pseudo registers */
+ };
+ if (regno < 0
+ || regno >= (sizeof (register_names) / sizeof (*register_names)))
+ internal_error (__FILE__, __LINE__,
+ "h8300s_register_name: illegal register number %d",
+ regno);
+ else
+ return register_names[regno];
+}
+static const char *
+h8300sx_register_name (int regno)
+{
+ static char *register_names[] = {
+ "er0", "er1", "er2", "er3", "er4", "er5", "er6",
+ "sp", "", "pc", "cycles", "", "tick", "inst",
+ "mach", "macl", "sbr", "vbr",
+ "ccr", "exr" /* pseudo registers */
+ };
+ if (regno < 0
+ || regno >= (sizeof (register_names) / sizeof (*register_names)))
+ internal_error (__FILE__, __LINE__,
+ "h8300sx_register_name: illegal register number %d",
+ regno);
+ else
+ return register_names[regno];
+}
-void
-h8300_print_register_hook (int regno)
+static void
+h8300_print_register (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regno)
{
- if (regno == CCR_REGNUM)
+ LONGEST rval;
+ const char *name = gdbarch_register_name (gdbarch, regno);
+
+ if (!name || !*name)
+ return;
+
+ rval = get_frame_register_signed (frame, regno);
+
+ fprintf_filtered (file, "%-14s ", name);
+ if ((regno == E_PSEUDO_CCR_REGNUM) || \
+ (regno == E_PSEUDO_EXR_REGNUM && is_h8300smode (current_gdbarch)))
+ {
+ fprintf_filtered (file, "0x%02x ", (unsigned char) rval);
+ print_longest (file, 'u', 1, rval);
+ }
+ else
+ {
+ fprintf_filtered (file, "0x%s ", phex ((ULONGEST) rval, BINWORD));
+ print_longest (file, 'd', 1, rval);
+ }
+ if (regno == E_PSEUDO_CCR_REGNUM)
{
/* CCR register */
int C, Z, N, V;
- unsigned char b[REGISTER_SIZE];
- unsigned char l;
- frame_register_read (selected_frame, regno, b);
- l = b[REGISTER_VIRTUAL_SIZE (CCR_REGNUM) - 1];
- printf_unfiltered ("\t");
- printf_unfiltered ("I-%d ", (l & 0x80) != 0);
- printf_unfiltered ("UI-%d ", (l & 0x40) != 0);
- printf_unfiltered ("H-%d ", (l & 0x20) != 0);
- printf_unfiltered ("U-%d ", (l & 0x10) != 0);
+ unsigned char l = rval & 0xff;
+ fprintf_filtered (file, "\t");
+ fprintf_filtered (file, "I-%d ", (l & 0x80) != 0);
+ fprintf_filtered (file, "UI-%d ", (l & 0x40) != 0);
+ fprintf_filtered (file, "H-%d ", (l & 0x20) != 0);
+ fprintf_filtered (file, "U-%d ", (l & 0x10) != 0);
N = (l & 0x8) != 0;
Z = (l & 0x4) != 0;
V = (l & 0x2) != 0;
C = (l & 0x1) != 0;
- printf_unfiltered ("N-%d ", N);
- printf_unfiltered ("Z-%d ", Z);
- printf_unfiltered ("V-%d ", V);
- printf_unfiltered ("C-%d ", C);
+ fprintf_filtered (file, "N-%d ", N);
+ fprintf_filtered (file, "Z-%d ", Z);
+ fprintf_filtered (file, "V-%d ", V);
+ fprintf_filtered (file, "C-%d ", C);
if ((C | Z) == 0)
- printf_unfiltered ("u> ");
+ fprintf_filtered (file, "u> ");
if ((C | Z) == 1)
- printf_unfiltered ("u<= ");
+ fprintf_filtered (file, "u<= ");
if ((C == 0))
- printf_unfiltered ("u>= ");
+ fprintf_filtered (file, "u>= ");
if (C == 1)
- printf_unfiltered ("u< ");
+ fprintf_filtered (file, "u< ");
if (Z == 0)
- printf_unfiltered ("!= ");
+ fprintf_filtered (file, "!= ");
if (Z == 1)
- printf_unfiltered ("== ");
+ fprintf_filtered (file, "== ");
if ((N ^ V) == 0)
- printf_unfiltered (">= ");
+ fprintf_filtered (file, ">= ");
if ((N ^ V) == 1)
- printf_unfiltered ("< ");
+ fprintf_filtered (file, "< ");
if ((Z | (N ^ V)) == 0)
- printf_unfiltered ("> ");
+ fprintf_filtered (file, "> ");
if ((Z | (N ^ V)) == 1)
- printf_unfiltered ("<= ");
+ fprintf_filtered (file, "<= ");
+ }
+ else if (regno == E_PSEUDO_EXR_REGNUM && is_h8300smode (current_gdbarch))
+ {
+ /* EXR register */
+ unsigned char l = rval & 0xff;
+ fprintf_filtered (file, "\t");
+ fprintf_filtered (file, "T-%d - - - ", (l & 0x80) != 0);
+ fprintf_filtered (file, "I2-%d ", (l & 4) != 0);
+ fprintf_filtered (file, "I1-%d ", (l & 2) != 0);
+ fprintf_filtered (file, "I0-%d", (l & 1) != 0);
+ }
+ fprintf_filtered (file, "\n");
+}
+
+static void
+h8300_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regno, int cpregs)
+{
+ if (regno < 0)
+ {
+ for (regno = E_R0_REGNUM; regno <= E_SP_REGNUM; ++regno)
+ h8300_print_register (gdbarch, file, frame, regno);
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_CCR_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_PC_REGNUM);
+ if (is_h8300smode (current_gdbarch))
+ {
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_EXR_REGNUM);
+ if (is_h8300sxmode (current_gdbarch))
+ {
+ h8300_print_register (gdbarch, file, frame, E_SBR_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_VBR_REGNUM);
+ }
+ h8300_print_register (gdbarch, file, frame, E_MACH_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_MACL_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_CYCLES_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_TICKS_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_INSTS_REGNUM);
+ }
+ else
+ {
+ h8300_print_register (gdbarch, file, frame, E_CYCLES_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_TICK_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_INST_REGNUM);
+ }
+ }
+ else
+ {
+ if (regno == E_CCR_REGNUM)
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_CCR_REGNUM);
+ else if (regno == E_PSEUDO_EXR_REGNUM
+ && is_h8300smode (current_gdbarch))
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_EXR_REGNUM);
+ else
+ h8300_print_register (gdbarch, file, frame, regno);
}
}
+static struct type *
+h8300_register_type (struct gdbarch *gdbarch, int regno)
+{
+ if (regno < 0 || regno >= NUM_REGS + NUM_PSEUDO_REGS)
+ internal_error (__FILE__, __LINE__,
+ "h8300_register_type: illegal register number %d", regno);
+ else
+ {
+ switch (regno)
+ {
+ case E_PC_REGNUM:
+ return builtin_type_void_func_ptr;
+ case E_SP_REGNUM:
+ case E_FP_REGNUM:
+ return builtin_type_void_data_ptr;
+ default:
+ if (regno == E_PSEUDO_CCR_REGNUM)
+ return builtin_type_uint8;
+ else if (regno == E_PSEUDO_EXR_REGNUM)
+ return builtin_type_uint8;
+ else if (is_h8300hmode (current_gdbarch))
+ return builtin_type_int32;
+ else
+ return builtin_type_int16;
+ }
+ }
+}
+
+static void
+h8300_pseudo_register_read (struct gdbarch *gdbarch,
+ struct regcache *regcache, int regno, void *buf)
+{
+ if (regno == E_PSEUDO_CCR_REGNUM)
+ regcache_raw_read (regcache, E_CCR_REGNUM, buf);
+ else if (regno == E_PSEUDO_EXR_REGNUM)
+ regcache_raw_read (regcache, E_EXR_REGNUM, buf);
+ else
+ regcache_raw_read (regcache, regno, buf);
+}
+
+static void
+h8300_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache, int regno,
+ const void *buf)
+{
+ if (regno == E_PSEUDO_CCR_REGNUM)
+ regcache_raw_write (regcache, E_CCR_REGNUM, buf);
+ else if (regno == E_PSEUDO_EXR_REGNUM)
+ regcache_raw_write (regcache, E_EXR_REGNUM, buf);
+ else
+ regcache_raw_write (regcache, regno, buf);
+}
+
+static int
+h8300_dbg_reg_to_regnum (int regno)
+{
+ if (regno == E_CCR_REGNUM)
+ return E_PSEUDO_CCR_REGNUM;
+ return regno;
+}
+
+static int
+h8300s_dbg_reg_to_regnum (int regno)
+{
+ if (regno == E_CCR_REGNUM)
+ return E_PSEUDO_CCR_REGNUM;
+ if (regno == E_EXR_REGNUM)
+ return E_PSEUDO_EXR_REGNUM;
+ return regno;
+}
+
+const static unsigned char *
+h8300_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+{
+ /*static unsigned char breakpoint[] = { 0x7A, 0xFF }; *//* ??? */
+ static unsigned char breakpoint[] = { 0x01, 0x80 }; /* Sleep */
+
+ *lenptr = sizeof (breakpoint);
+ return breakpoint;
+}
+
+static void
+h8300_print_float_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, const char *args)
+{
+ fprintf_filtered (file, "\
+No floating-point info available for this processor.\n");
+}
+
+static struct gdbarch *
+h8300_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ struct gdbarch_tdep *tdep = NULL;
+ struct gdbarch *gdbarch;
+
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (arches != NULL)
+ return arches->gdbarch;
+
+#if 0
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+#endif
+
+ if (info.bfd_arch_info->arch != bfd_arch_h8300)
+ return NULL;
+
+ gdbarch = gdbarch_alloc (&info, 0);
+
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_h8300:
+ set_gdbarch_num_regs (gdbarch, 13);
+ set_gdbarch_num_pseudo_regs (gdbarch, 1);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300_register_name);
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_return_value (gdbarch, h8300_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300);
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300hn:
+ set_gdbarch_num_regs (gdbarch, 13);
+ set_gdbarch_num_pseudo_regs (gdbarch, 1);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300_register_name);
+ if (info.bfd_arch_info->mach != bfd_mach_h8300hn)
+ {
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ }
+ else
+ {
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ }
+ set_gdbarch_return_value (gdbarch, h8300h_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300h);
+ break;
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ set_gdbarch_num_regs (gdbarch, 16);
+ set_gdbarch_num_pseudo_regs (gdbarch, 2);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300s_register_name);
+ if (info.bfd_arch_info->mach != bfd_mach_h8300sn)
+ {
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ }
+ else
+ {
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ }
+ set_gdbarch_return_value (gdbarch, h8300h_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300s);
+ break;
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ set_gdbarch_num_regs (gdbarch, 18);
+ set_gdbarch_num_pseudo_regs (gdbarch, 2);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300sx_register_name);
+ if (info.bfd_arch_info->mach != bfd_mach_h8300sxn)
+ {
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ }
+ else
+ {
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ }
+ set_gdbarch_return_value (gdbarch, h8300h_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300s);
+ break;
+ }
+
+ set_gdbarch_pseudo_register_read (gdbarch, h8300_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, h8300_pseudo_register_write);
+
+ /*
+ * Basic register fields and methods.
+ */
+
+ set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
+ set_gdbarch_register_type (gdbarch, h8300_register_type);
+ set_gdbarch_print_registers_info (gdbarch, h8300_print_registers_info);
+ set_gdbarch_print_float_info (gdbarch, h8300_print_float_info);
+
+ /*
+ * Frame Info
+ */
+ set_gdbarch_skip_prologue (gdbarch, h8300_skip_prologue);
+
+ /* Frame unwinder. */
+ set_gdbarch_unwind_pc (gdbarch, h8300_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, h8300_unwind_sp);
+ set_gdbarch_unwind_dummy_id (gdbarch, h8300_unwind_dummy_id);
+ frame_base_set_default (gdbarch, &h8300_frame_base);
+
+ /*
+ * Miscelany
+ */
+ /* Stack grows up. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+
+ set_gdbarch_breakpoint_from_pc (gdbarch, h8300_breakpoint_from_pc);
+ set_gdbarch_push_dummy_call (gdbarch, h8300_push_dummy_call);
+
+ set_gdbarch_char_signed (gdbarch, 0);
+ set_gdbarch_int_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+
+ /* Hook in the DWARF CFI frame unwinder. */
+ frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, h8300_frame_sniffer);
+
+ return gdbarch;
+
+}
+
+extern initialize_file_ftype _initialize_h8300_tdep; /* -Wmissing-prototypes */
+
void
_initialize_h8300_tdep (void)
{
- tm_print_insn = gdb_print_insn_h8300;
+ register_gdbarch_init (bfd_arch_h8300, h8300_gdbarch_init);
+}
+
+static int
+is_h8300hmode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sx
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300s
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300h
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300hn;
+}
+
+static int
+is_h8300smode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sx
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300s
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sn;
+}
+
+static int
+is_h8300sxmode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sx
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn;
+}
+
+static int
+is_h8300_normal_mode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300hn;
}