-#include <stdio.h>
-#include "defs.h"
+/* Target-machine dependent code for Hitachi H8/300, for GDB.
+ Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-/* an easy to debug H8 stack frame looks like:
-0x6df2 push r2
-0x6df3 push r3
-0x6df6 push r6
-0x mov.w r7,r6
- subs stuff,sp mov.w #x,r5
- subs r5,sp
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+/*
+ Contributed by Steve Chamberlain
+ sac@cygnus.com
*/
-#define IS_PUSH(x) ((x & 0xff00)==0x6d00)
-CORE_ADDR h8300_skip_prologue(start_pc)
-CORE_ADDR start_pc;
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "dis-asm.h"
+#include "gdbcmd.h"
+#include "gdbtypes.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include "value.h"
+
+extern int h8300hmode, h8300smode;
+
+#undef NUM_REGS
+#define NUM_REGS 11
+
+#define UNSIGNED_SHORT(X) ((X) & 0xffff)
+
+#define IS_PUSH(x) ((x & 0xfff0)==0x6df0)
+#define IS_PUSH_FP(x) (x == 0x6df6)
+#define IS_MOVE_FP(x) (x == 0x0d76 || x == 0x0ff6)
+#define IS_MOV_SP_FP(x) (x == 0x0d76 || x == 0x0ff6)
+#define IS_SUB2_SP(x) (x==0x1b87)
+#define IS_SUB4_SP(x) (x==0x1b97)
+#define IS_SUBL_SP(x) (x==0x7a37)
+#define IS_MOVK_R5(x) (x==0x7905)
+#define IS_SUB_R5SP(x) (x==0x1957)
+
+/* Local function declarations. */
+
+static CORE_ADDR examine_prologue ();
+static void set_machine_hook PARAMS ((char *filename));
+
+void h8300_frame_find_saved_regs ();
+
+CORE_ADDR
+h8300_skip_prologue (start_pc)
+ CORE_ADDR start_pc;
{
- /* Skip past all push insns */
short int w;
+ int adjust = 0;
+
+ /* Skip past all push and stm insns. */
+ while (1)
+ {
+ w = read_memory_unsigned_integer (start_pc, 2);
+ /* First look for push insns. */
+ if (w == 0x0100 || w == 0x0110 || w == 0x0120 || w == 0x0130)
+ {
+ w = read_memory_unsigned_integer (start_pc + 2, 2);
+ adjust = 2;
+ }
+
+ if (IS_PUSH (w))
+ {
+ start_pc += 2 + adjust;
+ w = read_memory_unsigned_integer (start_pc, 2);
+ continue;
+ }
+ adjust = 0;
+ break;
+ }
+
+ /* Skip past a move to FP, either word or long sized */
+ w = read_memory_unsigned_integer (start_pc, 2);
+ if (w == 0x0100)
+ {
+ w = read_memory_unsigned_integer (start_pc + 2, 2);
+ adjust += 2;
+ }
+
+ if (IS_MOVE_FP (w))
+ {
+ start_pc += 2 + adjust;
+ w = read_memory_unsigned_integer (start_pc, 2);
+ }
+
+ /* Check for loading either a word constant into r5;
+ long versions are handled by the SUBL_SP below. */
+ if (IS_MOVK_R5 (w))
+ {
+ start_pc += 2;
+ w = read_memory_unsigned_integer (start_pc, 2);
+ }
+
+ /* Now check for subtracting r5 from sp, word sized only. */
+ if (IS_SUB_R5SP (w))
+ {
+ start_pc += 2 + adjust;
+ w = read_memory_unsigned_integer (start_pc, 2);
+ }
+
+ /* Check for subs #2 and subs #4. */
+ while (IS_SUB2_SP (w) || IS_SUB4_SP (w))
+ {
+ start_pc += 2 + adjust;
+ w = read_memory_unsigned_integer (start_pc, 2);
+ }
+
+ /* Check for a 32bit subtract. */
+ if (IS_SUBL_SP (w))
+ start_pc += 6 + adjust;
+
+ return start_pc;
+}
+
+int
+gdb_print_insn_h8300 (memaddr, info)
+ bfd_vma memaddr;
+ disassemble_info *info;
+{
+ if (h8300smode)
+ return print_insn_h8300s (memaddr, info);
+ else if (h8300hmode)
+ return print_insn_h8300h (memaddr, info);
+ else
+ return print_insn_h8300 (memaddr, info);
+}
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+ This will be used to create a new GDB frame struct, and then
+ INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+ For us, the frame address is its stack pointer value, so we look up
+ the function prologue to determine the caller's sp value, and return it. */
+
+CORE_ADDR
+h8300_frame_chain (thisframe)
+ struct frame_info *thisframe;
+{
+ if (PC_IN_CALL_DUMMY(thisframe->pc, thisframe->frame, thisframe->frame))
+ { /* initialize the from_pc now */
+ thisframe->from_pc = generic_read_register_dummy (thisframe->pc,
+ thisframe->frame,
+ PC_REGNUM);
+ return thisframe->frame;
+ }
+ h8300_frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0);
+ return thisframe->fsr->regs[SP_REGNUM];
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+ the addresses of the saved registers of frame described by FRAME_INFO.
+ This includes special registers such as pc and fp saved in special
+ ways in the stack frame. sp is even more special:
+ the address we return for it IS the sp for the next frame.
+
+ We cache the result of doing this in the frame_obstack, since it is
+ fairly expensive. */
+
+void
+h8300_frame_find_saved_regs (fi, fsr)
+ struct frame_info *fi;
+ struct frame_saved_regs *fsr;
+{
+ register struct frame_saved_regs *cache_fsr;
+ CORE_ADDR ip;
+ struct symtab_and_line sal;
+ CORE_ADDR limit;
+
+ if (!fi->fsr)
+ {
+ cache_fsr = (struct frame_saved_regs *)
+ frame_obstack_alloc (sizeof (struct frame_saved_regs));
+ memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
+
+ fi->fsr = cache_fsr;
+
+ if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+ { /* no more to do. */
+ if (fsr)
+ *fsr = *fi->fsr;
+ return;
+ }
+ /* Find the start and end of the function prologue. If the PC
+ is in the function prologue, we only consider the part that
+ has executed already. */
+
+ ip = get_pc_function_start (fi->pc);
+ sal = find_pc_line (ip, 0);
+ limit = (sal.end && sal.end < fi->pc) ? sal.end : fi->pc;
+
+ /* This will fill in fields in *fi as well as in cache_fsr. */
+ examine_prologue (ip, limit, fi->frame, cache_fsr, fi);
+ }
+
+ if (fsr)
+ *fsr = *fi->fsr;
+}
+
+/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+ is not the address of a valid instruction, the address of the next
+ instruction beyond ADDR otherwise. *PWORD1 receives the first word
+ of the instruction.*/
+
+CORE_ADDR
+NEXT_PROLOGUE_INSN (addr, lim, pword1)
+ CORE_ADDR addr;
+ CORE_ADDR lim;
+ INSN_WORD *pword1;
+{
+ char buf[2];
+ if (addr < lim + 8)
+ {
+ read_memory (addr, buf, 2);
+ *pword1 = extract_signed_integer (buf, 2);
+
+ return addr + 2;
+ }
+ return 0;
+}
+
+/* Examine the prologue of a function. `ip' points to the first instruction.
+ `limit' is the limit of the prologue (e.g. the addr of the first
+ linenumber, or perhaps the program counter if we're stepping through).
+ `frame_sp' is the stack pointer value in use in this frame.
+ `fsr' is a pointer to a frame_saved_regs structure into which we put
+ info about the registers saved by this frame.
+ `fi' is a struct frame_info pointer; we fill in various fields in it
+ to reflect the offsets of the arg pointer and the locals pointer. */
+
+static CORE_ADDR
+examine_prologue (ip, limit, after_prolog_fp, fsr, fi)
+ register CORE_ADDR ip;
+ register CORE_ADDR limit;
+ CORE_ADDR after_prolog_fp;
+ struct frame_saved_regs *fsr;
+ struct frame_info *fi;
+{
+ register CORE_ADDR next_ip;
+ int r;
+ int have_fp = 0;
+ INSN_WORD insn_word;
+ /* Number of things pushed onto stack, starts at 2/4, 'cause the
+ PC is already there */
+ unsigned int reg_save_depth = h8300hmode ? 4 : 2;
+
+ unsigned int auto_depth = 0; /* Number of bytes of autos */
+
+ char in_frame[11]; /* One for each reg */
+
+ int adjust = 0;
+
+ memset (in_frame, 1, 11);
+ for (r = 0; r < 8; r++)
+ {
+ fsr->regs[r] = 0;
+ }
+ if (after_prolog_fp == 0)
+ {
+ after_prolog_fp = read_register (SP_REGNUM);
+ }
+
+ /* If the PC isn't valid, quit now. */
+ if (ip == 0 || ip & (h8300hmode ? ~0xffffff : ~0xffff))
+ return 0;
+
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+
+ if (insn_word == 0x0100)
+ {
+ insn_word = read_memory_unsigned_integer (ip + 2, 2);
+ adjust = 2;
+ }
+
+ /* Skip over any fp push instructions */
+ fsr->regs[6] = after_prolog_fp;
+ while (next_ip && IS_PUSH_FP (insn_word))
+ {
+ ip = next_ip + adjust;
+
+ in_frame[insn_word & 0x7] = reg_save_depth;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ reg_save_depth += 2 + adjust;
+ }
+
+ /* Is this a move into the fp */
+ if (next_ip && IS_MOV_SP_FP (insn_word))
+ {
+ ip = next_ip;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ have_fp = 1;
+ }
+
+ /* Skip over any stack adjustment, happens either with a number of
+ sub#2,sp or a mov #x,r5 sub r5,sp */
+
+ if (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+ {
+ while (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+ {
+ auto_depth += IS_SUB2_SP (insn_word) ? 2 : 4;
+ ip = next_ip;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ }
+ }
+ else
+ {
+ if (next_ip && IS_MOVK_R5 (insn_word))
+ {
+ ip = next_ip;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ auto_depth += insn_word;
+
+ next_ip = NEXT_PROLOGUE_INSN (next_ip, limit, &insn_word);
+ auto_depth += insn_word;
+ }
+ if (next_ip && IS_SUBL_SP (insn_word))
+ {
+ ip = next_ip;
+ auto_depth += read_memory_unsigned_integer (ip, 4);
+ ip += 4;
+
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ }
+ }
+
+ /* Now examine the push insns to determine where everything lives
+ on the stack. */
+ while (1)
+ {
+ adjust = 0;
+ if (!next_ip)
+ break;
+
+ if (insn_word == 0x0100)
+ {
+ ip = next_ip;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ adjust = 2;
+ }
+
+ if (IS_PUSH (insn_word))
+ {
+ ip = next_ip;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ fsr->regs[r] = after_prolog_fp + auto_depth;
+ auto_depth += 2 + adjust;
+ continue;
+ }
+
+ /* Now check for push multiple insns. */
+ if (insn_word == 0x0110 || insn_word == 0x0120 || insn_word == 0x0130)
+ {
+ int count = ((insn_word >> 4) & 0xf) + 1;
+ int start, i;
+
+ ip = next_ip;
+ next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ start = insn_word & 0x7;
+
+ for (i = start; i <= start + count; i++)
+ {
+ fsr->regs[i] = after_prolog_fp + auto_depth;
+ auto_depth += 4;
+ }
+ }
+ break;
+ }
+
+ /* The args are always reffed based from the stack pointer */
+ fi->args_pointer = after_prolog_fp;
+ /* Locals are always reffed based from the fp */
+ fi->locals_pointer = after_prolog_fp;
+ /* The PC is at a known place */
+ fi->from_pc = read_memory_unsigned_integer (after_prolog_fp + BINWORD, BINWORD);
+
+ /* Rememeber any others too */
+ in_frame[PC_REGNUM] = 0;
- w = read_memory_integer(start_pc, 2);
- while (IS_PUSH(w))
- {
- start_pc+=2;
- w = read_memory_integer(start_pc, 2);
+ if (have_fp)
+ /* We keep the old FP in the SP spot */
+ fsr->regs[SP_REGNUM] = read_memory_unsigned_integer (fsr->regs[6], BINWORD);
+ else
+ fsr->regs[SP_REGNUM] = after_prolog_fp + auto_depth;
+
+ return (ip);
+}
+
+void
+h8300_init_extra_frame_info (fromleaf, fi)
+ int fromleaf;
+ struct frame_info *fi;
+{
+ fi->fsr = 0; /* Not yet allocated */
+ fi->args_pointer = 0; /* Unknown */
+ fi->locals_pointer = 0; /* Unknown */
+ fi->from_pc = 0;
+ if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+ { /* anything special to do? */
+ return;
+ }
+}
+
+/* Return the saved PC from this frame.
+
+ If the frame has a memory copy of SRP_REGNUM, use that. If not,
+ just use the register SRP_REGNUM itself. */
+
+CORE_ADDR
+h8300_frame_saved_pc (frame)
+ struct frame_info *frame;
+{
+ if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+ return generic_read_register_dummy (frame->pc, frame->frame, PC_REGNUM);
+ else
+ return frame->from_pc;
+}
+
+CORE_ADDR
+frame_locals_address (fi)
+ struct frame_info *fi;
+{
+ if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+ return (CORE_ADDR) 0; /* Not sure what else to do... */
+ if (!fi->locals_pointer)
+ {
+ struct frame_saved_regs ignore;
+
+ get_frame_saved_regs (fi, &ignore);
+
+ }
+ return fi->locals_pointer;
+}
+
+/* Return the address of the argument block for the frame
+ described by FI. Returns 0 if the address is unknown. */
+
+CORE_ADDR
+frame_args_address (fi)
+ struct frame_info *fi;
+{
+ if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+ return (CORE_ADDR) 0; /* Not sure what else to do... */
+ if (!fi->args_pointer)
+ {
+ struct frame_saved_regs ignore;
+
+ get_frame_saved_regs (fi, &ignore);
+
+ }
+
+ return fi->args_pointer;
+}
+
+/* Function: push_arguments
+ Setup the function arguments for calling a function in the inferior.
+
+ On the Hitachi H8/300 architecture, there are three registers (R0 to R2)
+ which are dedicated for passing function arguments. Up to the first
+ three arguments (depending on size) may go into these registers.
+ The rest go on the stack.
+
+ Arguments that are smaller than WORDSIZE bytes will still take up a
+ whole register or a whole WORDSIZE word on the stack, and will be
+ right-justified in the register or the stack word. This includes
+ chars and small aggregate types. Note that WORDSIZE depends on the
+ cpu type.
+
+ Arguments that are larger than WORDSIZE bytes will be split between
+ two or more registers as available, but will NOT be split between a
+ register and the stack.
+
+ An exceptional case exists for struct arguments (and possibly other
+ aggregates such as arrays) -- if the size is larger than WORDSIZE
+ bytes but not a multiple of WORDSIZE bytes. In this case the
+ argument is never split between the registers and the stack, but
+ instead is copied in its entirety onto the stack, AND also copied
+ into as many registers as there is room for. In other words, space
+ in registers permitting, two copies of the same argument are passed
+ in. As far as I can tell, only the one on the stack is used,
+ although that may be a function of the level of compiler
+ optimization. I suspect this is a compiler bug. Arguments of
+ these odd sizes are left-justified within the word (as opposed to
+ arguments smaller than WORDSIZE bytes, which are right-justified).
+
+ If the function is to return an aggregate type such as a struct,
+ the caller must allocate space into which the callee will copy the
+ return value. In this case, a pointer to the return value location
+ is passed into the callee in register R0, which displaces one of
+ the other arguments passed in via registers R0 to R2. */
+
+CORE_ADDR
+h8300_push_arguments(nargs, args, sp, struct_return, struct_addr)
+ int nargs;
+ struct value **args;
+ CORE_ADDR sp;
+ unsigned char struct_return;
+ CORE_ADDR struct_addr;
+{
+ int stack_align, stack_alloc, stack_offset;
+ int wordsize;
+ int argreg;
+ int argnum;
+ struct type *type;
+ CORE_ADDR regval;
+ char *val;
+ char valbuf[4];
+ int len;
+
+ if (h8300hmode || h8300smode)
+ {
+ stack_align = 3;
+ wordsize = 4;
+ }
+ else
+ {
+ stack_align = 1;
+ wordsize = 2;
+ }
+
+ /* first force sp to a n-byte alignment */
+ sp = sp & ~stack_align;
+
+ /* Now make sure there's space on the stack */
+ for (argnum = 0, stack_alloc = 0;
+ argnum < nargs; argnum++)
+ stack_alloc += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + stack_align)
+ & ~stack_align);
+ sp -= stack_alloc; /* make room on stack for args */
+ /* we may over-allocate a little here, but that won't hurt anything */
+
+ argreg = ARG0_REGNUM;
+ if (struct_return) /* "struct return" pointer takes up one argreg */
+ {
+ write_register (argreg++, struct_addr);
+ }
+
+ /* Now load as many as possible of the first arguments into
+ registers, and push the rest onto the stack. There are 3N bytes
+ in three registers available. Loop thru args from first to last. */
+
+ for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+ {
+ type = VALUE_TYPE (args[argnum]);
+ len = TYPE_LENGTH (type);
+ memset(valbuf, 0, sizeof(valbuf));
+ if (len < wordsize)
+ {
+ /* the purpose of this is to right-justify the value within the word */
+ memcpy(valbuf + (wordsize - len),
+ (char *) VALUE_CONTENTS (args[argnum]), len);
+ val = valbuf;
+ }
+ else
+ val = (char *) VALUE_CONTENTS (args[argnum]);
+
+ if (len > (ARGLAST_REGNUM+1 - argreg) * REGISTER_RAW_SIZE(ARG0_REGNUM) ||
+ (len > wordsize && (len & stack_align) != 0))
+ { /* passed on the stack */
+ write_memory (sp + stack_offset, val,
+ len < wordsize ? wordsize : len);
+ stack_offset += (len + stack_align) & ~stack_align;
+ }
+ /* NOTE WELL!!!!! This is not an "else if" clause!!!
+ That's because some *&^%$ things get passed on the stack
+ AND in the registers! */
+ if (len <= (ARGLAST_REGNUM+1 - argreg) * REGISTER_RAW_SIZE(ARG0_REGNUM))
+ while (len > 0)
+ { /* there's room in registers */
+ regval = extract_address (val, wordsize);
+ write_register (argreg, regval);
+ len -= wordsize;
+ val += wordsize;
+ argreg++;
+ }
+ }
+ return sp;
+}
+
+/* Function: push_return_address
+ Setup the return address for a dummy frame, as called by
+ call_function_by_hand. Only necessary when you are using an
+ empty CALL_DUMMY, ie. the target will not actually be executing
+ a JSR/BSR instruction. */
+
+CORE_ADDR
+h8300_push_return_address (pc, sp)
+ CORE_ADDR pc;
+ CORE_ADDR sp;
+{
+ unsigned char buf[4];
+ int wordsize;
+
+ if (h8300hmode || h8300smode)
+ wordsize = 4;
+ else
+ wordsize = 2;
+
+ sp -= wordsize;
+ store_unsigned_integer (buf, wordsize, CALL_DUMMY_ADDRESS ());
+ write_memory (sp, buf, wordsize);
+ return sp;
+}
+
+/* Function: pop_frame
+ Restore the machine to the state it had before the current frame
+ was created. Usually used either by the "RETURN" command, or by
+ call_function_by_hand after the dummy_frame is finished. */
+
+void
+h8300_pop_frame ()
+{
+ unsigned regnum;
+ struct frame_saved_regs fsr;
+ struct frame_info *frame = get_current_frame ();
+
+ if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+ {
+ generic_pop_dummy_frame();
+ }
+ else
+ {
+ get_frame_saved_regs (frame, &fsr);
+
+ for (regnum = 0; regnum < 8; regnum++)
+ {
+ /* Don't forget SP_REGNUM is a frame_saved_regs struct is the
+ actual value we want, not the address of the value we want. */
+ if (fsr.regs[regnum] && regnum != SP_REGNUM)
+ write_register (regnum,
+ read_memory_integer(fsr.regs[regnum], BINWORD));
+ else if (fsr.regs[regnum] && regnum == SP_REGNUM)
+ write_register (regnum, frame->frame + 2 * BINWORD);
+ }
+
+ /* Don't forget the update the PC too! */
+ write_pc (frame->from_pc);
+ }
+ flush_cached_frames ();
+}
+
+/* Function: extract_return_value
+ Figure out where in REGBUF the called function has left its return value.
+ Copy that into VALBUF. Be sure to account for CPU type. */
+
+void
+h8300_extract_return_value (type, regbuf, valbuf)
+ struct type *type;
+ char *regbuf;
+ char *valbuf;
+{
+ int wordsize, len;
+
+ if (h8300smode || h8300hmode)
+ wordsize = 4;
+ else
+ wordsize = 2;
+
+ len = TYPE_LENGTH(type);
+
+ switch (len) {
+ case 1: /* (char) */
+ case 2: /* (short), (int) */
+ memcpy (valbuf, regbuf + REGISTER_BYTE(0) + (wordsize - len), len);
+ break;
+ case 4: /* (long), (float) */
+ if (h8300smode || h8300hmode)
+ {
+ memcpy (valbuf, regbuf + REGISTER_BYTE(0), 4);
+ }
+ else
+ {
+ memcpy (valbuf, regbuf + REGISTER_BYTE(0), 2);
+ memcpy (valbuf+2, regbuf + REGISTER_BYTE(1), 2);
+ }
+ break;
+ case 8: /* (double) (doesn't seem to happen, which is good,
+ because this almost certainly isn't right. */
+ error ("I don't know how a double is returned.");
+ break;
}
-return start_pc;
-
}
-h8300_pop_frame()
+/* Function: store_return_value
+ Place the appropriate value in the appropriate registers.
+ Primarily used by the RETURN command. */
+
+void
+h8300_store_return_value (type, valbuf)
+ struct type *type;
+ char *valbuf;
{
- printf("pop frame\n");
+ int wordsize, len, regval;
+ if (h8300hmode || h8300smode)
+ wordsize = 4;
+ else
+ wordsize = 2;
+
+ len = TYPE_LENGTH(type);
+ switch (len) {
+ case 1: /* char */
+ case 2: /* short, int */
+ regval = extract_address(valbuf, len);
+ write_register (0, regval);
+ break;
+ case 4: /* long, float */
+ regval = extract_address(valbuf, len);
+ if (h8300smode || h8300hmode)
+ {
+ write_register (0, regval);
+ }
+ else
+ {
+ write_register (0, regval >> 16);
+ write_register (1, regval & 0xffff);
+ }
+ break;
+ case 8: /* presumeably double, but doesn't seem to happen */
+ error ("I don't know how to return a double.");
+ break;
+ }
}
-int
-print_insn(memaddr, stream)
-CORE_ADDR memaddr;
-FILE *stream;
-{
- /* Nothing is bigger than 8 bytes */
- char data[8];
- read_memory (memaddr, data, sizeof(data));
- return print_insn_h8300(memaddr, data , stream);
-
-
-}
-
-
-
- FRAME_CHAIN()
- {
-
- printf("Frame chain\n");
-
- }
-
-
+/* Function: get_saved_register
+ Just call the generic_get_saved_register function. */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+ char *raw_buffer;
+ int *optimized;
+ CORE_ADDR *addrp;
+ struct frame_info *frame;
+ int regnum;
+ enum lval_type *lval;
+{
+ generic_get_saved_register (raw_buffer, optimized, addrp,
+ frame, regnum, lval);
+}
+
+struct cmd_list_element *setmemorylist;
+
+static void
+h8300_command(args, from_tty)
+{
+ extern int h8300hmode;
+ h8300hmode = 0;
+ h8300smode = 0;
+}
+
+static void
+h8300h_command(args, from_tty)
+{
+ extern int h8300hmode;
+ h8300hmode = 1;
+ h8300smode = 0;
+}
+static void
+h8300s_command(args, from_tty)
+{
+ extern int h8300smode;
+ extern int h8300hmode;
+ h8300smode = 1;
+ h8300hmode = 1;
+}
+
+
+static void
+set_machine (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered ("\"set machine\" must be followed by h8300, h8300h");
+ printf_unfiltered ("or h8300s");
+ help_list (setmemorylist, "set memory ", -1, gdb_stdout);
+}
+
+/* set_machine_hook is called as the exec file is being opened, but
+ before the symbol file is opened. This allows us to set the
+ h8300hmode flag based on the machine type specified in the exec
+ file. This in turn will cause subsequently defined pointer types
+ to be 16 or 32 bits as appropriate for the machine. */
+
+static void
+set_machine_hook (filename)
+ char *filename;
+{
+ if (bfd_get_mach (exec_bfd) == bfd_mach_h8300s)
+ {
+ h8300smode = 1;
+ h8300hmode = 1;
+ }
+ else
+ if (bfd_get_mach (exec_bfd) == bfd_mach_h8300h)
+ {
+ h8300smode = 0;
+ h8300hmode = 1;
+ }
+ else
+ {
+ h8300smode = 0;
+ h8300hmode = 0;
+ }
+}
+
+void
+_initialize_h8300m ()
+{
+ add_prefix_cmd ("machine", no_class, set_machine,
+ "set the machine type",
+ &setmemorylist, "set machine ", 0,
+ &setlist);
+
+ add_cmd ("h8300", class_support, h8300_command,
+ "Set machine to be H8/300.", &setmemorylist);
+
+ add_cmd ("h8300h", class_support, h8300h_command,
+ "Set machine to be H8/300H.", &setmemorylist);
+
+ add_cmd ("h8300s", class_support, h8300s_command,
+ "Set machine to be H8/300S.", &setmemorylist);
+
+ /* Add a hook to set the machine type when we're loading a file. */
+
+ specify_exec_file_hook(set_machine_hook);
+}
+
+
+
+void
+print_register_hook (regno)
+{
+ if (regno == 8)
+ {
+ /* CCR register */
+ int C, Z, N, V;
+ unsigned char b[4];
+ unsigned char l;
+ read_relative_register_raw_bytes (regno, b);
+ l = b[REGISTER_VIRTUAL_SIZE(8) -1];
+ printf_unfiltered ("\t");
+ printf_unfiltered ("I-%d - ", (l & 0x80) != 0);
+ printf_unfiltered ("H-%d - ", (l & 0x20) != 0);
+ N = (l & 0x8) != 0;
+ Z = (l & 0x4) != 0;
+ V = (l & 0x2) != 0;
+ C = (l & 0x1) != 0;
+ printf_unfiltered ("N-%d ", N);
+ printf_unfiltered ("Z-%d ", Z);
+ printf_unfiltered ("V-%d ", V);
+ printf_unfiltered ("C-%d ", C);
+ if ((C | Z) == 0)
+ printf_unfiltered ("u> ");
+ if ((C | Z) == 1)
+ printf_unfiltered ("u<= ");
+ if ((C == 0))
+ printf_unfiltered ("u>= ");
+ if (C == 1)
+ printf_unfiltered ("u< ");
+ if (Z == 0)
+ printf_unfiltered ("!= ");
+ if (Z == 1)
+ printf_unfiltered ("== ");
+ if ((N ^ V) == 0)
+ printf_unfiltered (">= ");
+ if ((N ^ V) == 1)
+ printf_unfiltered ("< ");
+ if ((Z | (N ^ V)) == 0)
+ printf_unfiltered ("> ");
+ if ((Z | (N ^ V)) == 1)
+ printf_unfiltered ("<= ");
+ }
+}
+
+void
+_initialize_h8300_tdep ()
+{
+ tm_print_insn = gdb_print_insn_h8300;
+}