-/* Target-machine dependent code for Hitachi H8/300, for GDB.
+/* Target-machine dependent code for Renesas H8/300, for GDB.
- Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,
- 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2005, 2007 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/*
Contributed by Steve Chamberlain
*/
#include "defs.h"
-#include "frame.h"
-#include "symtab.h"
-#include "dis-asm.h"
-#include "gdbcmd.h"
-#include "gdbtypes.h"
-#include "gdbcore.h"
-#include "gdb_string.h"
#include "value.h"
+#include "arch-utils.h"
#include "regcache.h"
+#include "gdbcore.h"
+#include "objfiles.h"
+#include "gdb_assert.h"
+#include "dis-asm.h"
+#include "dwarf2-frame.h"
+#include "frame-base.h"
+#include "frame-unwind.h"
-extern int h8300hmode, h8300smode;
-
-#undef NUM_REGS
-#define NUM_REGS (h8300smode?12:11)
+enum gdb_regnum
+{
+ E_R0_REGNUM, E_ER0_REGNUM = E_R0_REGNUM, E_ARG0_REGNUM = E_R0_REGNUM,
+ E_RET0_REGNUM = E_R0_REGNUM,
+ E_R1_REGNUM, E_ER1_REGNUM = E_R1_REGNUM, E_RET1_REGNUM = E_R1_REGNUM,
+ E_R2_REGNUM, E_ER2_REGNUM = E_R2_REGNUM, E_ARGLAST_REGNUM = E_R2_REGNUM,
+ E_R3_REGNUM, E_ER3_REGNUM = E_R3_REGNUM,
+ E_R4_REGNUM, E_ER4_REGNUM = E_R4_REGNUM,
+ E_R5_REGNUM, E_ER5_REGNUM = E_R5_REGNUM,
+ E_R6_REGNUM, E_ER6_REGNUM = E_R6_REGNUM, E_FP_REGNUM = E_R6_REGNUM,
+ E_SP_REGNUM,
+ E_CCR_REGNUM,
+ E_PC_REGNUM,
+ E_CYCLES_REGNUM,
+ E_TICK_REGNUM, E_EXR_REGNUM = E_TICK_REGNUM,
+ E_INST_REGNUM, E_TICKS_REGNUM = E_INST_REGNUM,
+ E_INSTS_REGNUM,
+ E_MACH_REGNUM,
+ E_MACL_REGNUM,
+ E_SBR_REGNUM,
+ E_VBR_REGNUM
+};
-#define UNSIGNED_SHORT(X) ((X) & 0xffff)
+#define H8300_MAX_NUM_REGS 18
-#define IS_PUSH(x) ((x & 0xfff0)==0x6df0)
-#define IS_PUSH_FP(x) (x == 0x6df6)
-#define IS_MOVE_FP(x) (x == 0x0d76 || x == 0x0ff6)
-#define IS_MOV_SP_FP(x) (x == 0x0d76 || x == 0x0ff6)
-#define IS_SUB2_SP(x) (x==0x1b87)
-#define IS_SUB4_SP(x) (x==0x1b97)
-#define IS_SUBL_SP(x) (x==0x7a37)
-#define IS_MOVK_R5(x) (x==0x7905)
-#define IS_SUB_R5SP(x) (x==0x1957)
+#define E_PSEUDO_CCR_REGNUM (gdbarch_num_regs (current_gdbarch))
+#define E_PSEUDO_EXR_REGNUM (gdbarch_num_regs (current_gdbarch)+1)
-/* The register names change depending on whether the h8300h processor
- type is selected. */
+struct h8300_frame_cache
+{
+ /* Base address. */
+ CORE_ADDR base;
+ CORE_ADDR sp_offset;
+ CORE_ADDR pc;
-static char *original_register_names[] = REGISTER_NAMES;
+ /* Flag showing that a frame has been created in the prologue code. */
+ int uses_fp;
-static char *h8300h_register_names[] = {
- "er0", "er1", "er2", "er3", "er4", "er5", "er6",
- "sp", "ccr", "pc", "cycles", "exr", "tick", "inst"
+ /* Saved registers. */
+ CORE_ADDR saved_regs[H8300_MAX_NUM_REGS];
+ CORE_ADDR saved_sp;
};
-char **h8300_register_names = original_register_names;
+enum
+{
+ h8300_reg_size = 2,
+ h8300h_reg_size = 4,
+ h8300_max_reg_size = 4,
+};
-/* Local function declarations. */
+static int is_h8300hmode (struct gdbarch *gdbarch);
+static int is_h8300smode (struct gdbarch *gdbarch);
+static int is_h8300sxmode (struct gdbarch *gdbarch);
+static int is_h8300_normal_mode (struct gdbarch *gdbarch);
-static CORE_ADDR examine_prologue ();
-static void set_machine_hook (char *filename);
+#define BINWORD ((is_h8300hmode (current_gdbarch) \
+ && !is_h8300_normal_mode (current_gdbarch)) \
+ ? h8300h_reg_size : h8300_reg_size)
-CORE_ADDR
-h8300_skip_prologue (CORE_ADDR start_pc)
+static CORE_ADDR
+h8300_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- short int w;
- int adjust = 0;
-
- /* Skip past all push and stm insns. */
- while (1)
- {
- w = read_memory_unsigned_integer (start_pc, 2);
- /* First look for push insns. */
- if (w == 0x0100 || w == 0x0110 || w == 0x0120 || w == 0x0130)
- {
- w = read_memory_unsigned_integer (start_pc + 2, 2);
- adjust = 2;
- }
+ return frame_unwind_register_unsigned (next_frame, E_PC_REGNUM);
+}
- if (IS_PUSH (w))
- {
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
- continue;
- }
- adjust = 0;
- break;
- }
+static CORE_ADDR
+h8300_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_unsigned (next_frame, E_SP_REGNUM);
+}
- /* Skip past a move to FP, either word or long sized */
- w = read_memory_unsigned_integer (start_pc, 2);
- if (w == 0x0100)
- {
- w = read_memory_unsigned_integer (start_pc + 2, 2);
- adjust += 2;
- }
+static struct frame_id
+h8300_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (h8300_unwind_sp (gdbarch, next_frame),
+ frame_pc_unwind (next_frame));
+}
- if (IS_MOVE_FP (w))
- {
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
- }
+/* Normal frames. */
- /* Check for loading either a word constant into r5;
- long versions are handled by the SUBL_SP below. */
- if (IS_MOVK_R5 (w))
- {
- start_pc += 2;
- w = read_memory_unsigned_integer (start_pc, 2);
- }
+/* Allocate and initialize a frame cache. */
- /* Now check for subtracting r5 from sp, word sized only. */
- if (IS_SUB_R5SP (w))
- {
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
- }
+static void
+h8300_init_frame_cache (struct h8300_frame_cache *cache)
+{
+ int i;
- /* Check for subs #2 and subs #4. */
- while (IS_SUB2_SP (w) || IS_SUB4_SP (w))
- {
- start_pc += 2 + adjust;
- w = read_memory_unsigned_integer (start_pc, 2);
- }
+ /* Base address. */
+ cache->base = 0;
+ cache->sp_offset = 0;
+ cache->pc = 0;
- /* Check for a 32bit subtract. */
- if (IS_SUBL_SP (w))
- start_pc += 6 + adjust;
+ /* Frameless until proven otherwise. */
+ cache->uses_fp = 0;
- return start_pc;
+ /* Saved registers. We initialize these to -1 since zero is a valid
+ offset (that's where %fp is supposed to be stored). */
+ for (i = 0; i < gdbarch_num_regs (current_gdbarch); i++)
+ cache->saved_regs[i] = -1;
}
-int
-gdb_print_insn_h8300 (bfd_vma memaddr, disassemble_info * info)
+#define IS_MOVB_RnRm(x) (((x) & 0xff88) == 0x0c88)
+#define IS_MOVW_RnRm(x) (((x) & 0xff88) == 0x0d00)
+#define IS_MOVL_RnRm(x) (((x) & 0xff88) == 0x0f80)
+#define IS_MOVB_Rn16_SP(x) (((x) & 0xfff0) == 0x6ee0)
+#define IS_MOVB_EXT(x) ((x) == 0x7860)
+#define IS_MOVB_Rn24_SP(x) (((x) & 0xfff0) == 0x6aa0)
+#define IS_MOVW_Rn16_SP(x) (((x) & 0xfff0) == 0x6fe0)
+#define IS_MOVW_EXT(x) ((x) == 0x78e0)
+#define IS_MOVW_Rn24_SP(x) (((x) & 0xfff0) == 0x6ba0)
+/* Same instructions as mov.w, just prefixed with 0x0100 */
+#define IS_MOVL_PRE(x) ((x) == 0x0100)
+#define IS_MOVL_Rn16_SP(x) (((x) & 0xfff0) == 0x6fe0)
+#define IS_MOVL_EXT(x) ((x) == 0x78e0)
+#define IS_MOVL_Rn24_SP(x) (((x) & 0xfff0) == 0x6ba0)
+
+#define IS_PUSHFP_MOVESPFP(x) ((x) == 0x6df60d76)
+#define IS_PUSH_FP(x) ((x) == 0x01006df6)
+#define IS_MOV_SP_FP(x) ((x) == 0x0ff6)
+#define IS_SUB2_SP(x) ((x) == 0x1b87)
+#define IS_SUB4_SP(x) ((x) == 0x1b97)
+#define IS_ADD_IMM_SP(x) ((x) == 0x7a1f)
+#define IS_SUB_IMM_SP(x) ((x) == 0x7a3f)
+#define IS_SUBL4_SP(x) ((x) == 0x1acf)
+#define IS_MOV_IMM_Rn(x) (((x) & 0xfff0) == 0x7905)
+#define IS_SUB_RnSP(x) (((x) & 0xff0f) == 0x1907)
+#define IS_ADD_RnSP(x) (((x) & 0xff0f) == 0x0907)
+#define IS_PUSH(x) (((x) & 0xfff0) == 0x6df0)
+
+/* If the instruction at PC is an argument register spill, return its
+ length. Otherwise, return zero.
+
+ An argument register spill is an instruction that moves an argument
+ from the register in which it was passed to the stack slot in which
+ it really lives. It is a byte, word, or longword move from an
+ argument register to a negative offset from the frame pointer.
+
+ CV, 2003-06-16: Or, in optimized code or when the `register' qualifier
+ is used, it could be a byte, word or long move to registers r3-r5. */
+
+static int
+h8300_is_argument_spill (CORE_ADDR pc)
{
- if (h8300smode)
- return print_insn_h8300s (memaddr, info);
- else if (h8300hmode)
- return print_insn_h8300h (memaddr, info);
- else
- return print_insn_h8300 (memaddr, info);
-}
-
-/* Given a GDB frame, determine the address of the calling function's frame.
- This will be used to create a new GDB frame struct, and then
- INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+ int w = read_memory_unsigned_integer (pc, 2);
- For us, the frame address is its stack pointer value, so we look up
- the function prologue to determine the caller's sp value, and return it. */
+ if ((IS_MOVB_RnRm (w) || IS_MOVW_RnRm (w) || IS_MOVL_RnRm (w))
+ && (w & 0x70) <= 0x20 /* Rs is R0, R1 or R2 */
+ && (w & 0x7) >= 0x3 && (w & 0x7) <= 0x5) /* Rd is R3, R4 or R5 */
+ return 2;
-CORE_ADDR
-h8300_frame_chain (struct frame_info *thisframe)
-{
- if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
- { /* initialize the from_pc now */
- thisframe->from_pc = generic_read_register_dummy (thisframe->pc,
- thisframe->frame,
- PC_REGNUM);
- return thisframe->frame;
+ if (IS_MOVB_Rn16_SP (w)
+ && 8 <= (w & 0xf) && (w & 0xf) <= 10) /* Rs is R0L, R1L, or R2L */
+ {
+ if (read_memory_integer (pc + 2, 2) < 0) /* ... and d:16 is negative. */
+ return 4;
}
- h8300_frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0);
- return thisframe->fsr->regs[SP_REGNUM];
-}
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame.
-
- We cache the result of doing this in the frame_obstack, since it is
- fairly expensive. */
-
-void
-h8300_frame_find_saved_regs (struct frame_info *fi,
- struct frame_saved_regs *fsr)
-{
- register struct frame_saved_regs *cache_fsr;
- CORE_ADDR ip;
- struct symtab_and_line sal;
- CORE_ADDR limit;
+ else if (IS_MOVB_EXT (w))
+ {
+ if (IS_MOVB_Rn24_SP (read_memory_unsigned_integer (pc + 2, 2)))
+ {
+ LONGEST disp = read_memory_integer (pc + 4, 4);
- if (!fi->fsr)
+ /* ... and d:24 is negative. */
+ if (disp < 0 && disp > 0xffffff)
+ return 8;
+ }
+ }
+ else if (IS_MOVW_Rn16_SP (w)
+ && (w & 0xf) <= 2) /* Rs is R0, R1, or R2 */
+ {
+ /* ... and d:16 is negative. */
+ if (read_memory_integer (pc + 2, 2) < 0)
+ return 4;
+ }
+ else if (IS_MOVW_EXT (w))
{
- cache_fsr = (struct frame_saved_regs *)
- frame_obstack_alloc (sizeof (struct frame_saved_regs));
- memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
+ if (IS_MOVW_Rn24_SP (read_memory_unsigned_integer (pc + 2, 2)))
+ {
+ LONGEST disp = read_memory_integer (pc + 4, 4);
- fi->fsr = cache_fsr;
+ /* ... and d:24 is negative. */
+ if (disp < 0 && disp > 0xffffff)
+ return 8;
+ }
+ }
+ else if (IS_MOVL_PRE (w))
+ {
+ int w2 = read_memory_integer (pc + 2, 2);
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- { /* no more to do. */
- if (fsr)
- *fsr = *fi->fsr;
- return;
+ if (IS_MOVL_Rn16_SP (w2)
+ && (w2 & 0xf) <= 2) /* Rs is ER0, ER1, or ER2 */
+ {
+ /* ... and d:16 is negative. */
+ if (read_memory_integer (pc + 4, 2) < 0)
+ return 6;
}
- /* Find the start and end of the function prologue. If the PC
- is in the function prologue, we only consider the part that
- has executed already. */
+ else if (IS_MOVL_EXT (w2))
+ {
+ int w3 = read_memory_integer (pc + 4, 2);
- ip = get_pc_function_start (fi->pc);
- sal = find_pc_line (ip, 0);
- limit = (sal.end && sal.end < fi->pc) ? sal.end : fi->pc;
+ if (IS_MOVL_Rn24_SP (read_memory_integer (pc + 4, 2)))
+ {
+ LONGEST disp = read_memory_integer (pc + 6, 4);
- /* This will fill in fields in *fi as well as in cache_fsr. */
- examine_prologue (ip, limit, fi->frame, cache_fsr, fi);
+ /* ... and d:24 is negative. */
+ if (disp < 0 && disp > 0xffffff)
+ return 10;
+ }
+ }
}
- if (fsr)
- *fsr = *fi->fsr;
+ return 0;
}
-/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
- is not the address of a valid instruction, the address of the next
- instruction beyond ADDR otherwise. *PWORD1 receives the first word
- of the instruction. */
+/* Do a full analysis of the prologue at PC and update CACHE
+ accordingly. Bail out early if CURRENT_PC is reached. Return the
+ address where the analysis stopped.
-CORE_ADDR
-NEXT_PROLOGUE_INSN (CORE_ADDR addr, CORE_ADDR lim, INSN_WORD * pword1)
-{
- char buf[2];
- if (addr < lim + 8)
- {
- read_memory (addr, buf, 2);
- *pword1 = extract_signed_integer (buf, 2);
+ We handle all cases that can be generated by gcc.
- return addr + 2;
- }
- return 0;
-}
+ For allocating a stack frame:
-/* Examine the prologue of a function. `ip' points to the first instruction.
- `limit' is the limit of the prologue (e.g. the addr of the first
- linenumber, or perhaps the program counter if we're stepping through).
- `frame_sp' is the stack pointer value in use in this frame.
- `fsr' is a pointer to a frame_saved_regs structure into which we put
- info about the registers saved by this frame.
- `fi' is a struct frame_info pointer; we fill in various fields in it
- to reflect the offsets of the arg pointer and the locals pointer. */
+ mov.w r6,@-sp
+ mov.w sp,r6
+ mov.w #-n,rN
+ add.w rN,sp
-static CORE_ADDR
-examine_prologue (register CORE_ADDR ip, register CORE_ADDR limit,
- CORE_ADDR after_prolog_fp, struct frame_saved_regs *fsr,
- struct frame_info *fi)
-{
- register CORE_ADDR next_ip;
- int r;
- int have_fp = 0;
- INSN_WORD insn_word;
- /* Number of things pushed onto stack, starts at 2/4, 'cause the
- PC is already there */
- unsigned int reg_save_depth = h8300hmode ? 4 : 2;
+ mov.w r6,@-sp
+ mov.w sp,r6
+ subs #2,sp
+ (repeat)
- unsigned int auto_depth = 0; /* Number of bytes of autos */
+ mov.l er6,@-sp
+ mov.l sp,er6
+ add.l #-n,sp
- char in_frame[11]; /* One for each reg */
+ mov.w r6,@-sp
+ mov.w sp,r6
+ subs #4,sp
+ (repeat)
- int adjust = 0;
+ For saving registers:
- memset (in_frame, 1, 11);
- for (r = 0; r < 8; r++)
- {
- fsr->regs[r] = 0;
- }
- if (after_prolog_fp == 0)
- {
- after_prolog_fp = read_register (SP_REGNUM);
- }
+ mov.w rN,@-sp
+ mov.l erN,@-sp
+ stm.l reglist,@-sp
- /* If the PC isn't valid, quit now. */
- if (ip == 0 || ip & (h8300hmode ? ~0xffffff : ~0xffff))
- return 0;
+ */
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+static CORE_ADDR
+h8300_analyze_prologue (CORE_ADDR pc, CORE_ADDR current_pc,
+ struct h8300_frame_cache *cache)
+{
+ unsigned int op;
+ int regno, i, spill_size;
- if (insn_word == 0x0100)
- {
- insn_word = read_memory_unsigned_integer (ip + 2, 2);
- adjust = 2;
- }
+ cache->sp_offset = 0;
- /* Skip over any fp push instructions */
- fsr->regs[6] = after_prolog_fp;
- while (next_ip && IS_PUSH_FP (insn_word))
- {
- ip = next_ip + adjust;
+ if (pc >= current_pc)
+ return current_pc;
- in_frame[insn_word & 0x7] = reg_save_depth;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- reg_save_depth += 2 + adjust;
- }
+ op = read_memory_unsigned_integer (pc, 4);
- /* Is this a move into the fp */
- if (next_ip && IS_MOV_SP_FP (insn_word))
+ if (IS_PUSHFP_MOVESPFP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- have_fp = 1;
+ cache->saved_regs[E_FP_REGNUM] = 0;
+ cache->uses_fp = 1;
+ pc += 4;
}
-
- /* Skip over any stack adjustment, happens either with a number of
- sub#2,sp or a mov #x,r5 sub r5,sp */
-
- if (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+ else if (IS_PUSH_FP (op))
{
- while (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+ cache->saved_regs[E_FP_REGNUM] = 0;
+ pc += 4;
+ if (pc >= current_pc)
+ return current_pc;
+ op = read_memory_unsigned_integer (pc, 2);
+ if (IS_MOV_SP_FP (op))
{
- auto_depth += IS_SUB2_SP (insn_word) ? 2 : 4;
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ cache->uses_fp = 1;
+ pc += 2;
}
}
- else
+
+ while (pc < current_pc)
{
- if (next_ip && IS_MOVK_R5 (insn_word))
+ op = read_memory_unsigned_integer (pc, 2);
+ if (IS_SUB2_SP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- auto_depth += insn_word;
-
- next_ip = NEXT_PROLOGUE_INSN (next_ip, limit, &insn_word);
- auto_depth += insn_word;
+ cache->sp_offset += 2;
+ pc += 2;
}
- if (next_ip && IS_SUBL_SP (insn_word))
+ else if (IS_SUB4_SP (op))
{
- ip = next_ip;
- auto_depth += read_memory_unsigned_integer (ip, 4);
- ip += 4;
-
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+ cache->sp_offset += 4;
+ pc += 2;
}
- }
-
- /* Now examine the push insns to determine where everything lives
- on the stack. */
- while (1)
- {
- adjust = 0;
- if (!next_ip)
- break;
-
- if (insn_word == 0x0100)
+ else if (IS_ADD_IMM_SP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- adjust = 2;
+ cache->sp_offset += -read_memory_integer (pc + 2, 2);
+ pc += 4;
}
-
- if (IS_PUSH (insn_word))
+ else if (IS_SUB_IMM_SP (op))
{
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- fsr->regs[r] = after_prolog_fp + auto_depth;
- auto_depth += 2 + adjust;
- continue;
+ cache->sp_offset += read_memory_integer (pc + 2, 2);
+ pc += 4;
}
-
- /* Now check for push multiple insns. */
- if (insn_word == 0x0110 || insn_word == 0x0120 || insn_word == 0x0130)
+ else if (IS_SUBL4_SP (op))
{
- int count = ((insn_word >> 4) & 0xf) + 1;
- int start, i;
-
- ip = next_ip;
- next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
- start = insn_word & 0x7;
-
- for (i = start; i <= start + count; i++)
+ cache->sp_offset += 4;
+ pc += 2;
+ }
+ else if (IS_MOV_IMM_Rn (op))
+ {
+ int offset = read_memory_integer (pc + 2, 2);
+ regno = op & 0x000f;
+ op = read_memory_unsigned_integer (pc + 4, 2);
+ if (IS_ADD_RnSP (op) && (op & 0x00f0) == regno)
+ {
+ cache->sp_offset -= offset;
+ pc += 6;
+ }
+ else if (IS_SUB_RnSP (op) && (op & 0x00f0) == regno)
{
- fsr->regs[i] = after_prolog_fp + auto_depth;
- auto_depth += 4;
+ cache->sp_offset += offset;
+ pc += 6;
}
+ else
+ break;
}
- break;
- }
-
- /* The args are always reffed based from the stack pointer */
- fi->args_pointer = after_prolog_fp;
- /* Locals are always reffed based from the fp */
- fi->locals_pointer = after_prolog_fp;
- /* The PC is at a known place */
- fi->from_pc =
- read_memory_unsigned_integer (after_prolog_fp + BINWORD, BINWORD);
-
- /* Rememeber any others too */
- in_frame[PC_REGNUM] = 0;
-
- if (have_fp)
- /* We keep the old FP in the SP spot */
- fsr->regs[SP_REGNUM] =
- read_memory_unsigned_integer (fsr->regs[6], BINWORD);
- else
- fsr->regs[SP_REGNUM] = after_prolog_fp + auto_depth;
-
- return (ip);
-}
-
-void
-h8300_init_extra_frame_info (int fromleaf, struct frame_info *fi)
-{
- fi->fsr = 0; /* Not yet allocated */
- fi->args_pointer = 0; /* Unknown */
- fi->locals_pointer = 0; /* Unknown */
- fi->from_pc = 0;
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- { /* anything special to do? */
- return;
+ else if (IS_PUSH (op))
+ {
+ regno = op & 0x000f;
+ cache->sp_offset += 2;
+ cache->saved_regs[regno] = cache->sp_offset;
+ pc += 2;
+ }
+ else if (op == 0x0100)
+ {
+ op = read_memory_unsigned_integer (pc + 2, 2);
+ if (IS_PUSH (op))
+ {
+ regno = op & 0x000f;
+ cache->sp_offset += 4;
+ cache->saved_regs[regno] = cache->sp_offset;
+ pc += 4;
+ }
+ else
+ break;
+ }
+ else if ((op & 0xffcf) == 0x0100)
+ {
+ int op1;
+ op1 = read_memory_unsigned_integer (pc + 2, 2);
+ if (IS_PUSH (op1))
+ {
+ /* Since the prefix is 0x01x0, this is not a simple pushm but a
+ stm.l reglist,@-sp */
+ i = ((op & 0x0030) >> 4) + 1;
+ regno = op1 & 0x000f;
+ for (; i > 0; regno++, --i)
+ {
+ cache->sp_offset += 4;
+ cache->saved_regs[regno] = cache->sp_offset;
+ }
+ pc += 4;
+ }
+ else
+ break;
+ }
+ else
+ break;
}
-}
-
-/* Return the saved PC from this frame.
- If the frame has a memory copy of SRP_REGNUM, use that. If not,
- just use the register SRP_REGNUM itself. */
+ /* Check for spilling an argument register to the stack frame.
+ This could also be an initializing store from non-prologue code,
+ but I don't think there's any harm in skipping that. */
+ while ((spill_size = h8300_is_argument_spill (pc)) > 0
+ && pc + spill_size <= current_pc)
+ pc += spill_size;
-CORE_ADDR
-h8300_frame_saved_pc (struct frame_info *frame)
-{
- if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
- return generic_read_register_dummy (frame->pc, frame->frame, PC_REGNUM);
- else
- return frame->from_pc;
+ return pc;
}
-CORE_ADDR
-h8300_frame_locals_address (struct frame_info *fi)
+static struct h8300_frame_cache *
+h8300_frame_cache (struct frame_info *next_frame, void **this_cache)
{
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return (CORE_ADDR) 0; /* Not sure what else to do... */
- if (!fi->locals_pointer)
- {
- struct frame_saved_regs ignore;
+ struct h8300_frame_cache *cache;
+ char buf[4];
+ int i;
+ CORE_ADDR current_pc;
- get_frame_saved_regs (fi, &ignore);
+ if (*this_cache)
+ return *this_cache;
- }
- return fi->locals_pointer;
-}
+ cache = FRAME_OBSTACK_ZALLOC (struct h8300_frame_cache);
+ h8300_init_frame_cache (cache);
+ *this_cache = cache;
-/* Return the address of the argument block for the frame
- described by FI. Returns 0 if the address is unknown. */
+ /* In principle, for normal frames, %fp holds the frame pointer,
+ which holds the base address for the current stack frame.
+ However, for functions that don't need it, the frame pointer is
+ optional. For these "frameless" functions the frame pointer is
+ actually the frame pointer of the calling frame. */
-CORE_ADDR
-h8300_frame_args_address (struct frame_info *fi)
-{
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return (CORE_ADDR) 0; /* Not sure what else to do... */
- if (!fi->args_pointer)
- {
- struct frame_saved_regs ignore;
+ cache->base = frame_unwind_register_unsigned (next_frame, E_FP_REGNUM);
+ if (cache->base == 0)
+ return cache;
- get_frame_saved_regs (fi, &ignore);
+ cache->saved_regs[E_PC_REGNUM] = -BINWORD;
- }
+ cache->pc = frame_func_unwind (next_frame, NORMAL_FRAME);
+ current_pc = frame_pc_unwind (next_frame);
+ if (cache->pc != 0)
+ h8300_analyze_prologue (cache->pc, current_pc, cache);
- return fi->args_pointer;
-}
-
-/* Function: push_arguments
- Setup the function arguments for calling a function in the inferior.
-
- On the Hitachi H8/300 architecture, there are three registers (R0 to R2)
- which are dedicated for passing function arguments. Up to the first
- three arguments (depending on size) may go into these registers.
- The rest go on the stack.
-
- Arguments that are smaller than WORDSIZE bytes will still take up a
- whole register or a whole WORDSIZE word on the stack, and will be
- right-justified in the register or the stack word. This includes
- chars and small aggregate types. Note that WORDSIZE depends on the
- cpu type.
-
- Arguments that are larger than WORDSIZE bytes will be split between
- two or more registers as available, but will NOT be split between a
- register and the stack.
-
- An exceptional case exists for struct arguments (and possibly other
- aggregates such as arrays) -- if the size is larger than WORDSIZE
- bytes but not a multiple of WORDSIZE bytes. In this case the
- argument is never split between the registers and the stack, but
- instead is copied in its entirety onto the stack, AND also copied
- into as many registers as there is room for. In other words, space
- in registers permitting, two copies of the same argument are passed
- in. As far as I can tell, only the one on the stack is used,
- although that may be a function of the level of compiler
- optimization. I suspect this is a compiler bug. Arguments of
- these odd sizes are left-justified within the word (as opposed to
- arguments smaller than WORDSIZE bytes, which are right-justified).
-
- If the function is to return an aggregate type such as a struct,
- the caller must allocate space into which the callee will copy the
- return value. In this case, a pointer to the return value location
- is passed into the callee in register R0, which displaces one of
- the other arguments passed in via registers R0 to R2. */
-
-CORE_ADDR
-h8300_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- unsigned char struct_return, CORE_ADDR struct_addr)
-{
- int stack_align, stack_alloc, stack_offset;
- int wordsize;
- int argreg;
- int argnum;
- struct type *type;
- CORE_ADDR regval;
- char *val;
- char valbuf[4];
- int len;
-
- if (h8300hmode || h8300smode)
+ if (!cache->uses_fp)
{
- stack_align = 3;
- wordsize = 4;
+ /* We didn't find a valid frame, which means that CACHE->base
+ currently holds the frame pointer for our calling frame. If
+ we're at the start of a function, or somewhere half-way its
+ prologue, the function's frame probably hasn't been fully
+ setup yet. Try to reconstruct the base address for the stack
+ frame by looking at the stack pointer. For truly "frameless"
+ functions this might work too. */
+
+ cache->base = frame_unwind_register_unsigned (next_frame, E_SP_REGNUM)
+ + cache->sp_offset;
+ cache->saved_sp = cache->base + BINWORD;
+ cache->saved_regs[E_PC_REGNUM] = 0;
}
else
{
- stack_align = 1;
- wordsize = 2;
+ cache->saved_sp = cache->base + 2 * BINWORD;
+ cache->saved_regs[E_PC_REGNUM] = -BINWORD;
}
- /* first force sp to a n-byte alignment */
- sp = sp & ~stack_align;
+ /* Adjust all the saved registers such that they contain addresses
+ instead of offsets. */
+ for (i = 0; i < gdbarch_num_regs (get_frame_arch (next_frame)); i++)
+ if (cache->saved_regs[i] != -1)
+ cache->saved_regs[i] = cache->base - cache->saved_regs[i];
- /* Now make sure there's space on the stack */
- for (argnum = 0, stack_alloc = 0; argnum < nargs; argnum++)
- stack_alloc += ((TYPE_LENGTH (VALUE_TYPE (args[argnum])) + stack_align)
- & ~stack_align);
- sp -= stack_alloc; /* make room on stack for args */
- /* we may over-allocate a little here, but that won't hurt anything */
+ return cache;
+}
- argreg = ARG0_REGNUM;
- if (struct_return) /* "struct return" pointer takes up one argreg */
+static void
+h8300_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct h8300_frame_cache *cache =
+ h8300_frame_cache (next_frame, this_cache);
+
+ /* This marks the outermost frame. */
+ if (cache->base == 0)
+ return;
+
+ *this_id = frame_id_build (cache->saved_sp, cache->pc);
+}
+
+static void
+h8300_frame_prev_register (struct frame_info *next_frame, void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *valuep)
+{
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct h8300_frame_cache *cache =
+ h8300_frame_cache (next_frame, this_cache);
+
+ gdb_assert (regnum >= 0);
+
+ if (regnum == E_SP_REGNUM && cache->saved_sp)
{
- write_register (argreg++, struct_addr);
+ *optimizedp = 0;
+ *lvalp = not_lval;
+ *addrp = 0;
+ *realnump = -1;
+ if (valuep)
+ store_unsigned_integer (valuep, BINWORD, cache->saved_sp);
+ return;
}
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. There are 3N bytes
- in three registers available. Loop thru args from first to last. */
-
- for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+ if (regnum < gdbarch_num_regs (gdbarch)
+ && cache->saved_regs[regnum] != -1)
{
- type = VALUE_TYPE (args[argnum]);
- len = TYPE_LENGTH (type);
- memset (valbuf, 0, sizeof (valbuf));
- if (len < wordsize)
- {
- /* the purpose of this is to right-justify the value within the word */
- memcpy (valbuf + (wordsize - len),
- (char *) VALUE_CONTENTS (args[argnum]), len);
- val = valbuf;
- }
- else
- val = (char *) VALUE_CONTENTS (args[argnum]);
-
- if (len >
- (ARGLAST_REGNUM + 1 - argreg) * REGISTER_RAW_SIZE (ARG0_REGNUM)
- || (len > wordsize && (len & stack_align) != 0))
- { /* passed on the stack */
- write_memory (sp + stack_offset, val,
- len < wordsize ? wordsize : len);
- stack_offset += (len + stack_align) & ~stack_align;
- }
- /* NOTE WELL!!!!! This is not an "else if" clause!!!
- That's because some *&^%$ things get passed on the stack
- AND in the registers! */
- if (len <=
- (ARGLAST_REGNUM + 1 - argreg) * REGISTER_RAW_SIZE (ARG0_REGNUM))
- while (len > 0)
- { /* there's room in registers */
- regval = extract_address (val, wordsize);
- write_register (argreg, regval);
- len -= wordsize;
- val += wordsize;
- argreg++;
- }
+ *optimizedp = 0;
+ *lvalp = lval_memory;
+ *addrp = cache->saved_regs[regnum];
+ *realnump = -1;
+ if (valuep)
+ read_memory (*addrp, valuep, register_size (gdbarch, regnum));
+ return;
}
- return sp;
+
+ *optimizedp = 0;
+ *lvalp = lval_register;
+ *addrp = 0;
+ *realnump = regnum;
+ if (valuep)
+ frame_unwind_register (next_frame, *realnump, valuep);
}
-/* Function: push_return_address
- Setup the return address for a dummy frame, as called by
- call_function_by_hand. Only necessary when you are using an
- empty CALL_DUMMY, ie. the target will not actually be executing
- a JSR/BSR instruction. */
+static const struct frame_unwind h8300_frame_unwind = {
+ NORMAL_FRAME,
+ h8300_frame_this_id,
+ h8300_frame_prev_register
+};
-CORE_ADDR
-h8300_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+static const struct frame_unwind *
+h8300_frame_sniffer (struct frame_info *next_frame)
{
- unsigned char buf[4];
- int wordsize;
-
- if (h8300hmode || h8300smode)
- wordsize = 4;
- else
- wordsize = 2;
+ return &h8300_frame_unwind;
+}
- sp -= wordsize;
- store_unsigned_integer (buf, wordsize, CALL_DUMMY_ADDRESS ());
- write_memory (sp, buf, wordsize);
- return sp;
+static CORE_ADDR
+h8300_frame_base_address (struct frame_info *next_frame, void **this_cache)
+{
+ struct h8300_frame_cache *cache = h8300_frame_cache (next_frame, this_cache);
+ return cache->base;
}
-/* Function: h8300_pop_frame
- Restore the machine to the state it had before the current frame
- was created. Usually used either by the "RETURN" command, or by
- call_function_by_hand after the dummy_frame is finished. */
+static const struct frame_base h8300_frame_base = {
+ &h8300_frame_unwind,
+ h8300_frame_base_address,
+ h8300_frame_base_address,
+ h8300_frame_base_address
+};
-void
-h8300_pop_frame (void)
+static CORE_ADDR
+h8300_skip_prologue (CORE_ADDR pc)
{
- unsigned regnum;
- struct frame_saved_regs fsr;
- struct frame_info *frame = get_current_frame ();
+ CORE_ADDR func_addr = 0 , func_end = 0;
- if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
- generic_pop_dummy_frame ();
+ struct symtab_and_line sal;
+ struct h8300_frame_cache cache;
+
+ /* Found a function. */
+ sal = find_pc_line (func_addr, 0);
+ if (sal.end && sal.end < func_end)
+ /* Found a line number, use it as end of prologue. */
+ return sal.end;
+
+ /* No useable line symbol. Use prologue parsing method. */
+ h8300_init_frame_cache (&cache);
+ return h8300_analyze_prologue (func_addr, func_end, &cache);
}
- else
+
+ /* No function symbol -- just return the PC. */
+ return (CORE_ADDR) pc;
+}
+
+/* Function: push_dummy_call
+ Setup the function arguments for calling a function in the inferior.
+ In this discussion, a `word' is 16 bits on the H8/300s, and 32 bits
+ on the H8/300H.
+
+ There are actually two ABI's here: -mquickcall (the default) and
+ -mno-quickcall. With -mno-quickcall, all arguments are passed on
+ the stack after the return address, word-aligned. With
+ -mquickcall, GCC tries to use r0 -- r2 to pass registers. Since
+ GCC doesn't indicate in the object file which ABI was used to
+ compile it, GDB only supports the default --- -mquickcall.
+
+ Here are the rules for -mquickcall, in detail:
+
+ Each argument, whether scalar or aggregate, is padded to occupy a
+ whole number of words. Arguments smaller than a word are padded at
+ the most significant end; those larger than a word are padded at
+ the least significant end.
+
+ The initial arguments are passed in r0 -- r2. Earlier arguments go in
+ lower-numbered registers. Multi-word arguments are passed in
+ consecutive registers, with the most significant end in the
+ lower-numbered register.
+
+ If an argument doesn't fit entirely in the remaining registers, it
+ is passed entirely on the stack. Stack arguments begin just after
+ the return address. Once an argument has overflowed onto the stack
+ this way, all subsequent arguments are passed on the stack.
+
+ The above rule has odd consequences. For example, on the h8/300s,
+ if a function takes two longs and an int as arguments:
+ - the first long will be passed in r0/r1,
+ - the second long will be passed entirely on the stack, since it
+ doesn't fit in r2,
+ - and the int will be passed on the stack, even though it could fit
+ in r2.
+
+ A weird exception: if an argument is larger than a word, but not a
+ whole number of words in length (before padding), it is passed on
+ the stack following the rules for stack arguments above, even if
+ there are sufficient registers available to hold it. Stranger
+ still, the argument registers are still `used up' --- even though
+ there's nothing in them.
+
+ So, for example, on the h8/300s, if a function expects a three-byte
+ structure and an int, the structure will go on the stack, and the
+ int will go in r2, not r0.
+
+ If the function returns an aggregate type (struct, union, or class)
+ by value, the caller must allocate space to hold the return value,
+ and pass the callee a pointer to this space as an invisible first
+ argument, in R0.
+
+ For varargs functions, the last fixed argument and all the variable
+ arguments are always passed on the stack. This means that calls to
+ varargs functions don't work properly unless there is a prototype
+ in scope.
+
+ Basically, this ABI is not good, for the following reasons:
+ - You can't call vararg functions properly unless a prototype is in scope.
+ - Structure passing is inconsistent, to no purpose I can see.
+ - It often wastes argument registers, of which there are only three
+ to begin with. */
+
+static CORE_ADDR
+h8300_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int stack_alloc = 0, stack_offset = 0;
+ int wordsize = BINWORD;
+ int reg = E_ARG0_REGNUM;
+ int argument;
+
+ /* First, make sure the stack is properly aligned. */
+ sp = align_down (sp, wordsize);
+
+ /* Now make sure there's space on the stack for the arguments. We
+ may over-allocate a little here, but that won't hurt anything. */
+ for (argument = 0; argument < nargs; argument++)
+ stack_alloc += align_up (TYPE_LENGTH (value_type (args[argument])),
+ wordsize);
+ sp -= stack_alloc;
+
+ /* Now load as many arguments as possible into registers, and push
+ the rest onto the stack.
+ If we're returning a structure by value, then we must pass a
+ pointer to the buffer for the return value as an invisible first
+ argument. */
+ if (struct_return)
+ regcache_cooked_write_unsigned (regcache, reg++, struct_addr);
+
+ for (argument = 0; argument < nargs; argument++)
{
- get_frame_saved_regs (frame, &fsr);
+ struct type *type = value_type (args[argument]);
+ int len = TYPE_LENGTH (type);
+ char *contents = (char *) value_contents (args[argument]);
+
+ /* Pad the argument appropriately. */
+ int padded_len = align_up (len, wordsize);
+ gdb_byte *padded = alloca (padded_len);
+
+ memset (padded, 0, padded_len);
+ memcpy (len < wordsize ? padded + padded_len - len : padded,
+ contents, len);
- for (regnum = 0; regnum < 8; regnum++)
+ /* Could the argument fit in the remaining registers? */
+ if (padded_len <= (E_ARGLAST_REGNUM - reg + 1) * wordsize)
{
- /* Don't forget SP_REGNUM is a frame_saved_regs struct is the
- actual value we want, not the address of the value we want. */
- if (fsr.regs[regnum] && regnum != SP_REGNUM)
- write_register (regnum,
- read_memory_integer (fsr.regs[regnum], BINWORD));
- else if (fsr.regs[regnum] && regnum == SP_REGNUM)
- write_register (regnum, frame->frame + 2 * BINWORD);
+ /* Are we going to pass it on the stack anyway, for no good
+ reason? */
+ if (len > wordsize && len % wordsize)
+ {
+ /* I feel so unclean. */
+ write_memory (sp + stack_offset, padded, padded_len);
+ stack_offset += padded_len;
+
+ /* That's right --- even though we passed the argument
+ on the stack, we consume the registers anyway! Love
+ me, love my dog. */
+ reg += padded_len / wordsize;
+ }
+ else
+ {
+ /* Heavens to Betsy --- it's really going in registers!
+ It would be nice if we could use write_register_bytes
+ here, but on the h8/300s, there are gaps between
+ the registers in the register file. */
+ int offset;
+
+ for (offset = 0; offset < padded_len; offset += wordsize)
+ {
+ ULONGEST word = extract_unsigned_integer (padded + offset,
+ wordsize);
+ regcache_cooked_write_unsigned (regcache, reg++, word);
+ }
+ }
}
+ else
+ {
+ /* It doesn't fit in registers! Onto the stack it goes. */
+ write_memory (sp + stack_offset, padded, padded_len);
+ stack_offset += padded_len;
- /* Don't forget the update the PC too! */
- write_pc (frame->from_pc);
+ /* Once one argument has spilled onto the stack, all
+ subsequent arguments go on the stack. */
+ reg = E_ARGLAST_REGNUM + 1;
+ }
}
- flush_cached_frames ();
+
+ /* Store return address. */
+ sp -= wordsize;
+ write_memory_unsigned_integer (sp, wordsize, bp_addr);
+
+ /* Update stack pointer. */
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
+
+ /* Return the new stack pointer minus the return address slot since
+ that's what DWARF2/GCC uses as the frame's CFA. */
+ return sp + wordsize;
}
/* Function: extract_return_value
Figure out where in REGBUF the called function has left its return value.
Copy that into VALBUF. Be sure to account for CPU type. */
-void
-h8300_extract_return_value (struct type *type, char *regbuf, char *valbuf)
+static void
+h8300_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
{
- int wordsize, len;
-
- if (h8300smode || h8300hmode)
- wordsize = 4;
- else
- wordsize = 2;
-
- len = TYPE_LENGTH (type);
+ int len = TYPE_LENGTH (type);
+ ULONGEST c, addr;
switch (len)
{
- case 1: /* (char) */
- case 2: /* (short), (int) */
- memcpy (valbuf, regbuf + REGISTER_BYTE (0) + (wordsize - len), len);
+ case 1:
+ case 2:
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, len, c);
+ break;
+ case 4: /* Needs two registers on plain H8/300 */
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, 2, c);
+ regcache_cooked_read_unsigned (regcache, E_RET1_REGNUM, &c);
+ store_unsigned_integer ((void *) ((char *) valbuf + 2), 2, c);
break;
- case 4: /* (long), (float) */
- if (h8300smode || h8300hmode)
+ case 8: /* long long is now 8 bytes. */
+ if (TYPE_CODE (type) == TYPE_CODE_INT)
{
- memcpy (valbuf, regbuf + REGISTER_BYTE (0), 4);
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &addr);
+ c = read_memory_unsigned_integer ((CORE_ADDR) addr, len);
+ store_unsigned_integer (valbuf, len, c);
}
else
{
- memcpy (valbuf, regbuf + REGISTER_BYTE (0), 2);
- memcpy (valbuf + 2, regbuf + REGISTER_BYTE (1), 2);
+ error ("I don't know how this 8 byte value is returned.");
}
break;
- case 8: /* (double) (doesn't seem to happen, which is good,
- because this almost certainly isn't right. */
- error ("I don't know how a double is returned.");
- break;
}
}
-/* Function: store_return_value
- Place the appropriate value in the appropriate registers.
- Primarily used by the RETURN command. */
-
-void
-h8300_store_return_value (struct type *type, char *valbuf)
+static void
+h8300h_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
{
- int wordsize, len, regval;
-
- if (h8300hmode || h8300smode)
- wordsize = 4;
- else
- wordsize = 2;
+ int len = TYPE_LENGTH (type);
+ ULONGEST c, addr;
- len = TYPE_LENGTH (type);
switch (len)
{
- case 1: /* char */
- case 2: /* short, int */
- regval = extract_address (valbuf, len);
- write_register (0, regval);
+ case 1:
+ case 2:
+ case 4:
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, len, c);
break;
- case 4: /* long, float */
- regval = extract_address (valbuf, len);
- if (h8300smode || h8300hmode)
+ case 8: /* long long is now 8 bytes. */
+ if (TYPE_CODE (type) == TYPE_CODE_INT)
{
- write_register (0, regval);
+ regcache_cooked_read_unsigned (regcache, E_RET0_REGNUM, &c);
+ store_unsigned_integer (valbuf, 4, c);
+ regcache_cooked_read_unsigned (regcache, E_RET1_REGNUM, &c);
+ store_unsigned_integer ((void *) ((char *) valbuf + 4), 4, c);
}
else
{
- write_register (0, regval >> 16);
- write_register (1, regval & 0xffff);
+ error ("I don't know how this 8 byte value is returned.");
}
break;
- case 8: /* presumeably double, but doesn't seem to happen */
- error ("I don't know how to return a double.");
- break;
}
}
-struct cmd_list_element *setmemorylist;
-
-static void
-set_register_names (void)
+int
+h8300_use_struct_convention (struct type *value_type)
{
- if (h8300hmode != 0)
- h8300_register_names = h8300h_register_names;
- else
- h8300_register_names = original_register_names;
+ /* Types of 1, 2 or 4 bytes are returned in R0/R1, everything else on the
+ stack. */
+
+ if (TYPE_CODE (value_type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (value_type) == TYPE_CODE_UNION)
+ return 1;
+ return !(TYPE_LENGTH (value_type) == 1
+ || TYPE_LENGTH (value_type) == 2
+ || TYPE_LENGTH (value_type) == 4);
}
-static void
-h8300_command (char *args, int from_tty)
+int
+h8300h_use_struct_convention (struct type *value_type)
{
- extern int h8300hmode;
- h8300hmode = 0;
- h8300smode = 0;
- set_register_names ();
+ /* Types of 1, 2 or 4 bytes are returned in R0, INT types of 8 bytes are
+ returned in R0/R1, everything else on the stack. */
+ if (TYPE_CODE (value_type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (value_type) == TYPE_CODE_UNION)
+ return 1;
+ return !(TYPE_LENGTH (value_type) == 1
+ || TYPE_LENGTH (value_type) == 2
+ || TYPE_LENGTH (value_type) == 4
+ || (TYPE_LENGTH (value_type) == 8
+ && TYPE_CODE (value_type) == TYPE_CODE_INT));
}
+/* Function: store_return_value
+ Place the appropriate value in the appropriate registers.
+ Primarily used by the RETURN command. */
+
static void
-h8300h_command (char *args, int from_tty)
+h8300_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
{
- extern int h8300hmode;
- h8300hmode = 1;
- h8300smode = 0;
- set_register_names ();
+ int len = TYPE_LENGTH (type);
+ ULONGEST val;
+
+ switch (len)
+ {
+ case 1:
+ case 2: /* short... */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM, val);
+ break;
+ case 4: /* long, float */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM,
+ (val >> 16) & 0xffff);
+ regcache_cooked_write_unsigned (regcache, E_RET1_REGNUM, val & 0xffff);
+ break;
+ case 8: /* long long, double and long double are all defined
+ as 4 byte types so far so this shouldn't happen. */
+ error ("I don't know how to return an 8 byte value.");
+ break;
+ }
}
static void
-h8300s_command (char *args, int from_tty)
+h8300h_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
{
- extern int h8300smode;
- extern int h8300hmode;
- h8300smode = 1;
- h8300hmode = 1;
- set_register_names ();
+ int len = TYPE_LENGTH (type);
+ ULONGEST val;
+
+ switch (len)
+ {
+ case 1:
+ case 2:
+ case 4: /* long, float */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM, val);
+ break;
+ case 8:
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, E_RET0_REGNUM,
+ (val >> 32) & 0xffffffff);
+ regcache_cooked_write_unsigned (regcache, E_RET1_REGNUM,
+ val & 0xffffffff);
+ break;
+ }
}
-static void
-set_machine (char *args, int from_tty)
+static enum return_value_convention
+h8300_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
- printf_unfiltered ("\"set machine\" must be followed by h8300, h8300h");
- printf_unfiltered ("or h8300s");
- help_list (setmemorylist, "set memory ", -1, gdb_stdout);
+ if (h8300_use_struct_convention (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ if (writebuf)
+ h8300_store_return_value (type, regcache, writebuf);
+ else if (readbuf)
+ h8300_extract_return_value (type, regcache, readbuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-/* set_machine_hook is called as the exec file is being opened, but
- before the symbol file is opened. This allows us to set the
- h8300hmode flag based on the machine type specified in the exec
- file. This in turn will cause subsequently defined pointer types
- to be 16 or 32 bits as appropriate for the machine. */
-
-static void
-set_machine_hook (char *filename)
+static enum return_value_convention
+h8300h_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
- if (bfd_get_mach (exec_bfd) == bfd_mach_h8300s)
- {
- h8300smode = 1;
- h8300hmode = 1;
- }
- else if (bfd_get_mach (exec_bfd) == bfd_mach_h8300h)
+ if (h8300h_use_struct_convention (type))
{
- h8300smode = 0;
- h8300hmode = 1;
+ if (readbuf)
+ {
+ ULONGEST addr;
+
+ regcache_raw_read_unsigned (regcache, E_R0_REGNUM, &addr);
+ read_memory (addr, readbuf, TYPE_LENGTH (type));
+ }
+
+ return RETURN_VALUE_ABI_RETURNS_ADDRESS;
}
+ if (writebuf)
+ h8300h_store_return_value (type, regcache, writebuf);
+ else if (readbuf)
+ h8300h_extract_return_value (type, regcache, readbuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
+
+static struct cmd_list_element *setmachinelist;
+
+static const char *
+h8300_register_name (struct gdbarch *gdbarch, int regno)
+{
+ /* The register names change depending on which h8300 processor
+ type is selected. */
+ static char *register_names[] = {
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6",
+ "sp", "", "pc", "cycles", "tick", "inst",
+ "ccr", /* pseudo register */
+ };
+ if (regno < 0
+ || regno >= (sizeof (register_names) / sizeof (*register_names)))
+ internal_error (__FILE__, __LINE__,
+ "h8300_register_name: illegal register number %d", regno);
else
- {
- h8300smode = 0;
- h8300hmode = 0;
- }
- set_register_names ();
+ return register_names[regno];
}
-void
-_initialize_h8300m (void)
+static const char *
+h8300s_register_name (struct gdbarch *gdbarch, int regno)
{
- add_prefix_cmd ("machine", no_class, set_machine,
- "set the machine type",
- &setmemorylist, "set machine ", 0, &setlist);
+ static char *register_names[] = {
+ "er0", "er1", "er2", "er3", "er4", "er5", "er6",
+ "sp", "", "pc", "cycles", "", "tick", "inst",
+ "mach", "macl",
+ "ccr", "exr" /* pseudo registers */
+ };
+ if (regno < 0
+ || regno >= (sizeof (register_names) / sizeof (*register_names)))
+ internal_error (__FILE__, __LINE__,
+ "h8300s_register_name: illegal register number %d",
+ regno);
+ else
+ return register_names[regno];
+}
- add_cmd ("h8300", class_support, h8300_command,
- "Set machine to be H8/300.", &setmemorylist);
+static const char *
+h8300sx_register_name (struct gdbarch *gdbarch, int regno)
+{
+ static char *register_names[] = {
+ "er0", "er1", "er2", "er3", "er4", "er5", "er6",
+ "sp", "", "pc", "cycles", "", "tick", "inst",
+ "mach", "macl", "sbr", "vbr",
+ "ccr", "exr" /* pseudo registers */
+ };
+ if (regno < 0
+ || regno >= (sizeof (register_names) / sizeof (*register_names)))
+ internal_error (__FILE__, __LINE__,
+ "h8300sx_register_name: illegal register number %d",
+ regno);
+ else
+ return register_names[regno];
+}
- add_cmd ("h8300h", class_support, h8300h_command,
- "Set machine to be H8/300H.", &setmemorylist);
+static void
+h8300_print_register (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regno)
+{
+ LONGEST rval;
+ const char *name = gdbarch_register_name (gdbarch, regno);
- add_cmd ("h8300s", class_support, h8300s_command,
- "Set machine to be H8/300S.", &setmemorylist);
+ if (!name || !*name)
+ return;
- /* Add a hook to set the machine type when we're loading a file. */
+ rval = get_frame_register_signed (frame, regno);
- specify_exec_file_hook (set_machine_hook);
-}
-
-void
-h8300_print_register_hook (int regno)
-{
- if (regno == CCR_REGNUM)
+ fprintf_filtered (file, "%-14s ", name);
+ if ((regno == E_PSEUDO_CCR_REGNUM) || \
+ (regno == E_PSEUDO_EXR_REGNUM && is_h8300smode (gdbarch)))
+ {
+ fprintf_filtered (file, "0x%02x ", (unsigned char) rval);
+ print_longest (file, 'u', 1, rval);
+ }
+ else
+ {
+ fprintf_filtered (file, "0x%s ", phex ((ULONGEST) rval, BINWORD));
+ print_longest (file, 'd', 1, rval);
+ }
+ if (regno == E_PSEUDO_CCR_REGNUM)
{
/* CCR register */
int C, Z, N, V;
- unsigned char b[REGISTER_SIZE];
- unsigned char l;
- frame_register_read (selected_frame, regno, b);
- l = b[REGISTER_VIRTUAL_SIZE (CCR_REGNUM) - 1];
- printf_unfiltered ("\t");
- printf_unfiltered ("I-%d ", (l & 0x80) != 0);
- printf_unfiltered ("UI-%d ", (l & 0x40) != 0);
- printf_unfiltered ("H-%d ", (l & 0x20) != 0);
- printf_unfiltered ("U-%d ", (l & 0x10) != 0);
+ unsigned char l = rval & 0xff;
+ fprintf_filtered (file, "\t");
+ fprintf_filtered (file, "I-%d ", (l & 0x80) != 0);
+ fprintf_filtered (file, "UI-%d ", (l & 0x40) != 0);
+ fprintf_filtered (file, "H-%d ", (l & 0x20) != 0);
+ fprintf_filtered (file, "U-%d ", (l & 0x10) != 0);
N = (l & 0x8) != 0;
Z = (l & 0x4) != 0;
V = (l & 0x2) != 0;
C = (l & 0x1) != 0;
- printf_unfiltered ("N-%d ", N);
- printf_unfiltered ("Z-%d ", Z);
- printf_unfiltered ("V-%d ", V);
- printf_unfiltered ("C-%d ", C);
+ fprintf_filtered (file, "N-%d ", N);
+ fprintf_filtered (file, "Z-%d ", Z);
+ fprintf_filtered (file, "V-%d ", V);
+ fprintf_filtered (file, "C-%d ", C);
if ((C | Z) == 0)
- printf_unfiltered ("u> ");
+ fprintf_filtered (file, "u> ");
if ((C | Z) == 1)
- printf_unfiltered ("u<= ");
+ fprintf_filtered (file, "u<= ");
if ((C == 0))
- printf_unfiltered ("u>= ");
+ fprintf_filtered (file, "u>= ");
if (C == 1)
- printf_unfiltered ("u< ");
+ fprintf_filtered (file, "u< ");
if (Z == 0)
- printf_unfiltered ("!= ");
+ fprintf_filtered (file, "!= ");
if (Z == 1)
- printf_unfiltered ("== ");
+ fprintf_filtered (file, "== ");
if ((N ^ V) == 0)
- printf_unfiltered (">= ");
+ fprintf_filtered (file, ">= ");
if ((N ^ V) == 1)
- printf_unfiltered ("< ");
+ fprintf_filtered (file, "< ");
if ((Z | (N ^ V)) == 0)
- printf_unfiltered ("> ");
+ fprintf_filtered (file, "> ");
if ((Z | (N ^ V)) == 1)
- printf_unfiltered ("<= ");
+ fprintf_filtered (file, "<= ");
}
-
- if (regno == EXR_REGNUM && h8300smode)
+ else if (regno == E_PSEUDO_EXR_REGNUM && is_h8300smode (gdbarch))
{
/* EXR register */
- unsigned char b[REGISTER_SIZE];
- unsigned char l;
- frame_register_read (selected_frame, regno, b);
- l = b[REGISTER_VIRTUAL_SIZE (EXR_REGNUM) - 1];
- printf_unfiltered ("\t");
- printf_unfiltered ("T-%d - - - ", (l & 0x80) != 0);
- printf_unfiltered ("I2-%d ", (l & 4) != 0);
- printf_unfiltered ("I1-%d ", (l & 2) != 0);
- printf_unfiltered ("I0-%d", (l & 1) != 0);
+ unsigned char l = rval & 0xff;
+ fprintf_filtered (file, "\t");
+ fprintf_filtered (file, "T-%d - - - ", (l & 0x80) != 0);
+ fprintf_filtered (file, "I2-%d ", (l & 4) != 0);
+ fprintf_filtered (file, "I1-%d ", (l & 2) != 0);
+ fprintf_filtered (file, "I0-%d", (l & 1) != 0);
}
+ fprintf_filtered (file, "\n");
}
+static void
+h8300_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, int regno, int cpregs)
+{
+ if (regno < 0)
+ {
+ for (regno = E_R0_REGNUM; regno <= E_SP_REGNUM; ++regno)
+ h8300_print_register (gdbarch, file, frame, regno);
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_CCR_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_PC_REGNUM);
+ if (is_h8300smode (gdbarch))
+ {
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_EXR_REGNUM);
+ if (is_h8300sxmode (gdbarch))
+ {
+ h8300_print_register (gdbarch, file, frame, E_SBR_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_VBR_REGNUM);
+ }
+ h8300_print_register (gdbarch, file, frame, E_MACH_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_MACL_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_CYCLES_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_TICKS_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_INSTS_REGNUM);
+ }
+ else
+ {
+ h8300_print_register (gdbarch, file, frame, E_CYCLES_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_TICK_REGNUM);
+ h8300_print_register (gdbarch, file, frame, E_INST_REGNUM);
+ }
+ }
+ else
+ {
+ if (regno == E_CCR_REGNUM)
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_CCR_REGNUM);
+ else if (regno == E_PSEUDO_EXR_REGNUM
+ && is_h8300smode (gdbarch))
+ h8300_print_register (gdbarch, file, frame, E_PSEUDO_EXR_REGNUM);
+ else
+ h8300_print_register (gdbarch, file, frame, regno);
+ }
+}
+
+static struct type *
+h8300_register_type (struct gdbarch *gdbarch, int regno)
+{
+ if (regno < 0 || regno >= gdbarch_num_regs (gdbarch)
+ + gdbarch_num_pseudo_regs (gdbarch))
+ internal_error (__FILE__, __LINE__,
+ "h8300_register_type: illegal register number %d", regno);
+ else
+ {
+ switch (regno)
+ {
+ case E_PC_REGNUM:
+ return builtin_type_void_func_ptr;
+ case E_SP_REGNUM:
+ case E_FP_REGNUM:
+ return builtin_type_void_data_ptr;
+ default:
+ if (regno == E_PSEUDO_CCR_REGNUM)
+ return builtin_type_uint8;
+ else if (regno == E_PSEUDO_EXR_REGNUM)
+ return builtin_type_uint8;
+ else if (is_h8300hmode (gdbarch))
+ return builtin_type_int32;
+ else
+ return builtin_type_int16;
+ }
+ }
+}
+
+static void
+h8300_pseudo_register_read (struct gdbarch *gdbarch,
+ struct regcache *regcache, int regno,
+ gdb_byte *buf)
+{
+ if (regno == E_PSEUDO_CCR_REGNUM)
+ regcache_raw_read (regcache, E_CCR_REGNUM, buf);
+ else if (regno == E_PSEUDO_EXR_REGNUM)
+ regcache_raw_read (regcache, E_EXR_REGNUM, buf);
+ else
+ regcache_raw_read (regcache, regno, buf);
+}
+
+static void
+h8300_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache, int regno,
+ const gdb_byte *buf)
+{
+ if (regno == E_PSEUDO_CCR_REGNUM)
+ regcache_raw_write (regcache, E_CCR_REGNUM, buf);
+ else if (regno == E_PSEUDO_EXR_REGNUM)
+ regcache_raw_write (regcache, E_EXR_REGNUM, buf);
+ else
+ regcache_raw_write (regcache, regno, buf);
+}
+
+static int
+h8300_dbg_reg_to_regnum (int regno)
+{
+ if (regno == E_CCR_REGNUM)
+ return E_PSEUDO_CCR_REGNUM;
+ return regno;
+}
+
+static int
+h8300s_dbg_reg_to_regnum (int regno)
+{
+ if (regno == E_CCR_REGNUM)
+ return E_PSEUDO_CCR_REGNUM;
+ if (regno == E_EXR_REGNUM)
+ return E_PSEUDO_EXR_REGNUM;
+ return regno;
+}
+
+const static unsigned char *
+h8300_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr,
+ int *lenptr)
+{
+ /*static unsigned char breakpoint[] = { 0x7A, 0xFF }; *//* ??? */
+ static unsigned char breakpoint[] = { 0x01, 0x80 }; /* Sleep */
+
+ *lenptr = sizeof (breakpoint);
+ return breakpoint;
+}
+
+static void
+h8300_print_float_info (struct gdbarch *gdbarch, struct ui_file *file,
+ struct frame_info *frame, const char *args)
+{
+ fprintf_filtered (file, "\
+No floating-point info available for this processor.\n");
+}
+
+static struct gdbarch *
+h8300_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ struct gdbarch_tdep *tdep = NULL;
+ struct gdbarch *gdbarch;
+
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (arches != NULL)
+ return arches->gdbarch;
+
+#if 0
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+#endif
+
+ if (info.bfd_arch_info->arch != bfd_arch_h8300)
+ return NULL;
+
+ gdbarch = gdbarch_alloc (&info, 0);
+
+ switch (info.bfd_arch_info->mach)
+ {
+ case bfd_mach_h8300:
+ set_gdbarch_num_regs (gdbarch, 13);
+ set_gdbarch_num_pseudo_regs (gdbarch, 1);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300_register_name);
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_return_value (gdbarch, h8300_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300);
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300hn:
+ set_gdbarch_num_regs (gdbarch, 13);
+ set_gdbarch_num_pseudo_regs (gdbarch, 1);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300_register_name);
+ if (info.bfd_arch_info->mach != bfd_mach_h8300hn)
+ {
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ }
+ else
+ {
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ }
+ set_gdbarch_return_value (gdbarch, h8300h_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300h);
+ break;
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ set_gdbarch_num_regs (gdbarch, 16);
+ set_gdbarch_num_pseudo_regs (gdbarch, 2);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300s_register_name);
+ if (info.bfd_arch_info->mach != bfd_mach_h8300sn)
+ {
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ }
+ else
+ {
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ }
+ set_gdbarch_return_value (gdbarch, h8300h_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300s);
+ break;
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ set_gdbarch_num_regs (gdbarch, 18);
+ set_gdbarch_num_pseudo_regs (gdbarch, 2);
+ set_gdbarch_ecoff_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, h8300s_dbg_reg_to_regnum);
+ set_gdbarch_register_name (gdbarch, h8300sx_register_name);
+ if (info.bfd_arch_info->mach != bfd_mach_h8300sxn)
+ {
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ }
+ else
+ {
+ set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ }
+ set_gdbarch_return_value (gdbarch, h8300h_return_value);
+ set_gdbarch_print_insn (gdbarch, print_insn_h8300s);
+ break;
+ }
+
+ set_gdbarch_pseudo_register_read (gdbarch, h8300_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, h8300_pseudo_register_write);
+
+ /*
+ * Basic register fields and methods.
+ */
+
+ set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
+ set_gdbarch_register_type (gdbarch, h8300_register_type);
+ set_gdbarch_print_registers_info (gdbarch, h8300_print_registers_info);
+ set_gdbarch_print_float_info (gdbarch, h8300_print_float_info);
+
+ /*
+ * Frame Info
+ */
+ set_gdbarch_skip_prologue (gdbarch, h8300_skip_prologue);
+
+ /* Frame unwinder. */
+ set_gdbarch_unwind_pc (gdbarch, h8300_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, h8300_unwind_sp);
+ set_gdbarch_unwind_dummy_id (gdbarch, h8300_unwind_dummy_id);
+ frame_base_set_default (gdbarch, &h8300_frame_base);
+
+ /*
+ * Miscelany
+ */
+ /* Stack grows up. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+
+ set_gdbarch_breakpoint_from_pc (gdbarch, h8300_breakpoint_from_pc);
+ set_gdbarch_push_dummy_call (gdbarch, h8300_push_dummy_call);
+
+ set_gdbarch_char_signed (gdbarch, 0);
+ set_gdbarch_int_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+
+ /* Hook in the DWARF CFI frame unwinder. */
+ frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, h8300_frame_sniffer);
+
+ return gdbarch;
+
+}
+
+extern initialize_file_ftype _initialize_h8300_tdep; /* -Wmissing-prototypes */
+
void
_initialize_h8300_tdep (void)
{
- tm_print_insn = gdb_print_insn_h8300;
+ register_gdbarch_init (bfd_arch_h8300, h8300_gdbarch_init);
+}
+
+static int
+is_h8300hmode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sx
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300s
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300h
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300hn;
+}
+
+static int
+is_h8300smode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sx
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300s
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sn;
+}
+
+static int
+is_h8300sxmode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sx
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn;
+}
+
+static int
+is_h8300_normal_mode (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sxn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300sn
+ || gdbarch_bfd_arch_info (gdbarch)->mach == bfd_mach_h8300hn;
}