/* Target-dependent code for the HP PA architecture, for GDB.
- Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 1999
- Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
Contributed by the Center for Software Science at the
University of Utah (pa-gdb-bugs@cs.utah.edu).
#include "bfd.h"
#include "inferior.h"
#include "value.h"
+#include "regcache.h"
/* For argument passing to the inferior */
#include "symtab.h"
/*#include <sys/user.h> After a.out.h */
#include <sys/file.h>
#include "gdb_stat.h"
-#include "wait.h"
+#include "gdb_wait.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#define THREAD_INITIAL_FRAME_SYMBOL "__pthread_exit"
#define THREAD_INITIAL_FRAME_SYM_LEN sizeof(THREAD_INITIAL_FRAME_SYMBOL)
-static int extract_5_load PARAMS ((unsigned int));
+static int extract_5_load (unsigned int);
-static unsigned extract_5R_store PARAMS ((unsigned int));
+static unsigned extract_5R_store (unsigned int);
-static unsigned extract_5r_store PARAMS ((unsigned int));
+static unsigned extract_5r_store (unsigned int);
-static void find_dummy_frame_regs PARAMS ((struct frame_info *,
- struct frame_saved_regs *));
+static void find_dummy_frame_regs (struct frame_info *,
+ struct frame_saved_regs *);
-static int find_proc_framesize PARAMS ((CORE_ADDR));
+static int find_proc_framesize (CORE_ADDR);
-static int find_return_regnum PARAMS ((CORE_ADDR));
+static int find_return_regnum (CORE_ADDR);
-struct unwind_table_entry *find_unwind_entry PARAMS ((CORE_ADDR));
+struct unwind_table_entry *find_unwind_entry (CORE_ADDR);
-static int extract_17 PARAMS ((unsigned int));
+static int extract_17 (unsigned int);
-static unsigned deposit_21 PARAMS ((unsigned int, unsigned int));
+static unsigned deposit_21 (unsigned int, unsigned int);
-static int extract_21 PARAMS ((unsigned));
+static int extract_21 (unsigned);
-static unsigned deposit_14 PARAMS ((int, unsigned int));
+static unsigned deposit_14 (int, unsigned int);
-static int extract_14 PARAMS ((unsigned));
+static int extract_14 (unsigned);
-static void unwind_command PARAMS ((char *, int));
+static void unwind_command (char *, int);
-static int low_sign_extend PARAMS ((unsigned int, unsigned int));
+static int low_sign_extend (unsigned int, unsigned int);
-static int sign_extend PARAMS ((unsigned int, unsigned int));
+static int sign_extend (unsigned int, unsigned int);
-static int restore_pc_queue PARAMS ((struct frame_saved_regs *));
+static int restore_pc_queue (struct frame_saved_regs *);
-static int hppa_alignof PARAMS ((struct type *));
+static int hppa_alignof (struct type *);
/* To support multi-threading and stepping. */
-int hppa_prepare_to_proceed PARAMS (());
+int hppa_prepare_to_proceed ();
-static int prologue_inst_adjust_sp PARAMS ((unsigned long));
+static int prologue_inst_adjust_sp (unsigned long);
-static int is_branch PARAMS ((unsigned long));
+static int is_branch (unsigned long);
-static int inst_saves_gr PARAMS ((unsigned long));
+static int inst_saves_gr (unsigned long);
-static int inst_saves_fr PARAMS ((unsigned long));
+static int inst_saves_fr (unsigned long);
-static int pc_in_interrupt_handler PARAMS ((CORE_ADDR));
+static int pc_in_interrupt_handler (CORE_ADDR);
-static int pc_in_linker_stub PARAMS ((CORE_ADDR));
+static int pc_in_linker_stub (CORE_ADDR);
-static int compare_unwind_entries PARAMS ((const void *, const void *));
+static int compare_unwind_entries (const void *, const void *);
-static void read_unwind_info PARAMS ((struct objfile *));
+static void read_unwind_info (struct objfile *);
-static void internalize_unwinds PARAMS ((struct objfile *,
- struct unwind_table_entry *,
- asection *, unsigned int,
- unsigned int, CORE_ADDR));
-static void pa_print_registers PARAMS ((char *, int, int));
-static void pa_strcat_registers PARAMS ((char *, int, int, GDB_FILE *));
-static void pa_register_look_aside PARAMS ((char *, int, long *));
-static void pa_print_fp_reg PARAMS ((int));
-static void pa_strcat_fp_reg PARAMS ((int, GDB_FILE *, enum precision_type));
-static void record_text_segment_lowaddr PARAMS ((bfd *, asection *, void *));
+static void internalize_unwinds (struct objfile *,
+ struct unwind_table_entry *,
+ asection *, unsigned int,
+ unsigned int, CORE_ADDR);
+static void pa_print_registers (char *, int, int);
+static void pa_strcat_registers (char *, int, int, struct ui_file *);
+static void pa_register_look_aside (char *, int, long *);
+static void pa_print_fp_reg (int);
+static void pa_strcat_fp_reg (int, struct ui_file *, enum precision_type);
+static void record_text_segment_lowaddr (bfd *, asection *, void *);
typedef struct
{
extern int exception_catchpoints_are_fragile;
/* This is defined in valops.c. */
-extern value_ptr
- find_function_in_inferior PARAMS ((char *));
+extern struct value *find_function_in_inferior (char *);
/* Should call_function allocate stack space for a struct return? */
int
-hppa_use_struct_convention (gcc_p, type)
- int gcc_p;
- struct type *type;
+hppa_use_struct_convention (int gcc_p, struct type *type)
{
return (TYPE_LENGTH (type) > 2 * REGISTER_SIZE);
}
value. */
static int
-sign_extend (val, bits)
- unsigned val, bits;
+sign_extend (unsigned val, unsigned bits)
{
return (int) (val >> (bits - 1) ? (-1 << bits) | val : val);
}
/* For many immediate values the sign bit is the low bit! */
static int
-low_sign_extend (val, bits)
- unsigned val, bits;
+low_sign_extend (unsigned val, unsigned bits)
{
return (int) ((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
}
/* extract the immediate field from a ld{bhw}s instruction */
static int
-extract_5_load (word)
- unsigned word;
+extract_5_load (unsigned word)
{
return low_sign_extend (word >> 16 & MASK_5, 5);
}
/* extract the immediate field from a break instruction */
static unsigned
-extract_5r_store (word)
- unsigned word;
+extract_5r_store (unsigned word)
{
return (word & MASK_5);
}
/* extract the immediate field from a {sr}sm instruction */
static unsigned
-extract_5R_store (word)
- unsigned word;
+extract_5R_store (unsigned word)
{
return (word >> 16 & MASK_5);
}
/* extract a 14 bit immediate field */
static int
-extract_14 (word)
- unsigned word;
+extract_14 (unsigned word)
{
return low_sign_extend (word & MASK_14, 14);
}
/* deposit a 14 bit constant in a word */
static unsigned
-deposit_14 (opnd, word)
- int opnd;
- unsigned word;
+deposit_14 (int opnd, unsigned word)
{
unsigned sign = (opnd < 0 ? 1 : 0);
/* extract a 21 bit constant */
static int
-extract_21 (word)
- unsigned word;
+extract_21 (unsigned word)
{
int val;
the low 21 bits of opnd are relevant */
static unsigned
-deposit_21 (opnd, word)
- unsigned opnd, word;
+deposit_21 (unsigned opnd, unsigned word)
{
unsigned val = 0;
19 bit signed value. */
static int
-extract_17 (word)
- unsigned word;
+extract_17 (unsigned word)
{
return sign_extend (GET_FIELD (word, 19, 28) |
GET_FIELD (word, 29, 29) << 10 |
larger than the first, and zero if they are equal. */
static int
-compare_unwind_entries (arg1, arg2)
- const void *arg1;
- const void *arg2;
+compare_unwind_entries (const void *arg1, const void *arg2)
{
const struct unwind_table_entry *a = arg1;
const struct unwind_table_entry *b = arg2;
static CORE_ADDR low_text_segment_address;
static void
-record_text_segment_lowaddr (abfd, section, ignored)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *section;
- PTR ignored ATTRIBUTE_UNUSED;
+record_text_segment_lowaddr (bfd *abfd, asection *section, void *ignored)
{
if ((section->flags & (SEC_ALLOC | SEC_LOAD | SEC_READONLY)
== (SEC_ALLOC | SEC_LOAD | SEC_READONLY))
}
static void
-internalize_unwinds (objfile, table, section, entries, size, text_offset)
- struct objfile *objfile;
- struct unwind_table_entry *table;
- asection *section;
- unsigned int entries, size;
- CORE_ADDR text_offset;
+internalize_unwinds (struct objfile *objfile, struct unwind_table_entry *table,
+ asection *section, unsigned int entries, unsigned int size,
+ CORE_ADDR text_offset)
{
/* We will read the unwind entries into temporary memory, then
fill in the actual unwind table. */
low_text_segment_address = -1;
/* If addresses are 64 bits wide, then unwinds are supposed to
- be segment relative offsets instead of absolute addresses. */
- if (TARGET_PTR_BIT == 64)
+ be segment relative offsets instead of absolute addresses.
+
+ Note that when loading a shared library (text_offset != 0) the
+ unwinds are already relative to the text_offset that will be
+ passed in. */
+ if (TARGET_PTR_BIT == 64 && text_offset == 0)
{
bfd_map_over_sections (objfile->obfd,
record_text_segment_lowaddr, (PTR) NULL);
gets freed when the objfile is destroyed. */
static void
-read_unwind_info (objfile)
- struct objfile *objfile;
+read_unwind_info (struct objfile *objfile)
{
- asection *unwind_sec, *elf_unwind_sec, *stub_unwind_sec;
- unsigned unwind_size, elf_unwind_size, stub_unwind_size, total_size;
- unsigned index, unwind_entries, elf_unwind_entries;
+ asection *unwind_sec, *stub_unwind_sec;
+ unsigned unwind_size, stub_unwind_size, total_size;
+ unsigned index, unwind_entries;
unsigned stub_entries, total_entries;
CORE_ADDR text_offset;
struct obj_unwind_info *ui;
ui->cache = NULL;
ui->last = -1;
- /* Get hooks to all unwind sections. Note there is no linker-stub unwind
- section in ELF at the moment. */
- unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_START$");
- elf_unwind_sec = bfd_get_section_by_name (objfile->obfd, ".PARISC.unwind");
- stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$");
-
- /* Get sizes and unwind counts for all sections. */
- if (unwind_sec)
+ /* For reasons unknown the HP PA64 tools generate multiple unwinder
+ sections in a single executable. So we just iterate over every
+ section in the BFD looking for unwinder sections intead of trying
+ to do a lookup with bfd_get_section_by_name.
+
+ First determine the total size of the unwind tables so that we
+ can allocate memory in a nice big hunk. */
+ total_entries = 0;
+ for (unwind_sec = objfile->obfd->sections;
+ unwind_sec;
+ unwind_sec = unwind_sec->next)
{
- unwind_size = bfd_section_size (objfile->obfd, unwind_sec);
- unwind_entries = unwind_size / UNWIND_ENTRY_SIZE;
- }
- else
- {
- unwind_size = 0;
- unwind_entries = 0;
- }
+ if (strcmp (unwind_sec->name, "$UNWIND_START$") == 0
+ || strcmp (unwind_sec->name, ".PARISC.unwind") == 0)
+ {
+ unwind_size = bfd_section_size (objfile->obfd, unwind_sec);
+ unwind_entries = unwind_size / UNWIND_ENTRY_SIZE;
- if (elf_unwind_sec)
- {
- elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec);
- elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE;
- }
- else
- {
- elf_unwind_size = 0;
- elf_unwind_entries = 0;
+ total_entries += unwind_entries;
+ }
}
+ /* Now compute the size of the stub unwinds. Note the ELF tools do not
+ use stub unwinds at the curren time. */
+ stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$");
+
if (stub_unwind_sec)
{
stub_unwind_size = bfd_section_size (objfile->obfd, stub_unwind_sec);
}
/* Compute total number of unwind entries and their total size. */
- total_entries = unwind_entries + elf_unwind_entries + stub_entries;
+ total_entries += stub_entries;
total_size = total_entries * sizeof (struct unwind_table_entry);
/* Allocate memory for the unwind table. */
obstack_alloc (&objfile->psymbol_obstack, total_size);
ui->last = total_entries - 1;
- /* Internalize the standard unwind entries. */
+ /* Now read in each unwind section and internalize the standard unwind
+ entries. */
index = 0;
- internalize_unwinds (objfile, &ui->table[index], unwind_sec,
- unwind_entries, unwind_size, text_offset);
- index += unwind_entries;
- internalize_unwinds (objfile, &ui->table[index], elf_unwind_sec,
- elf_unwind_entries, elf_unwind_size, text_offset);
- index += elf_unwind_entries;
-
- /* Now internalize the stub unwind entries. */
+ for (unwind_sec = objfile->obfd->sections;
+ unwind_sec;
+ unwind_sec = unwind_sec->next)
+ {
+ if (strcmp (unwind_sec->name, "$UNWIND_START$") == 0
+ || strcmp (unwind_sec->name, ".PARISC.unwind") == 0)
+ {
+ unwind_size = bfd_section_size (objfile->obfd, unwind_sec);
+ unwind_entries = unwind_size / UNWIND_ENTRY_SIZE;
+
+ internalize_unwinds (objfile, &ui->table[index], unwind_sec,
+ unwind_entries, unwind_size, text_offset);
+ index += unwind_entries;
+ }
+ }
+
+ /* Now read in and internalize the stub unwind entries. */
if (stub_unwind_size > 0)
{
unsigned int i;
search of the unwind tables, we depend upon them to be sorted. */
struct unwind_table_entry *
-find_unwind_entry (pc)
- CORE_ADDR pc;
+find_unwind_entry (CORE_ADDR pc)
{
int first, middle, last;
struct objfile *objfile;
bizarre way in which someone (?) decided they wanted to handle
frame pointerless code in GDB. */
int
-hpread_adjust_stack_address (func_addr)
- CORE_ADDR func_addr;
+hpread_adjust_stack_address (CORE_ADDR func_addr)
{
struct unwind_table_entry *u;
kind. */
static int
-pc_in_interrupt_handler (pc)
- CORE_ADDR pc;
+pc_in_interrupt_handler (CORE_ADDR pc)
{
struct unwind_table_entry *u;
struct minimal_symbol *msym_us;
?!? Need to handle stubs which appear in PA64 code. */
static int
-pc_in_linker_stub (pc)
- CORE_ADDR pc;
+pc_in_linker_stub (CORE_ADDR pc)
{
int found_magic_instruction = 0;
int i;
}
static int
-find_return_regnum (pc)
- CORE_ADDR pc;
+find_return_regnum (CORE_ADDR pc)
{
struct unwind_table_entry *u;
/* Return size of frame, or -1 if we should use a frame pointer. */
static int
-find_proc_framesize (pc)
- CORE_ADDR pc;
+find_proc_framesize (CORE_ADDR pc)
{
struct unwind_table_entry *u;
struct minimal_symbol *msym_us;
}
/* Return offset from sp at which rp is saved, or 0 if not saved. */
-static int rp_saved PARAMS ((CORE_ADDR));
+static int rp_saved (CORE_ADDR);
static int
-rp_saved (pc)
- CORE_ADDR pc;
+rp_saved (CORE_ADDR pc)
{
struct unwind_table_entry *u;
}
\f
int
-frameless_function_invocation (frame)
- struct frame_info *frame;
+frameless_function_invocation (struct frame_info *frame)
{
struct unwind_table_entry *u;
}
CORE_ADDR
-saved_pc_after_call (frame)
- struct frame_info *frame;
+saved_pc_after_call (struct frame_info *frame)
{
int ret_regnum;
CORE_ADDR pc;
}
\f
CORE_ADDR
-hppa_frame_saved_pc (frame)
- struct frame_info *frame;
+hppa_frame_saved_pc (struct frame_info *frame)
{
CORE_ADDR pc = get_frame_pc (frame);
struct unwind_table_entry *u;
in a system call. */
void
-init_extra_frame_info (fromleaf, frame)
- int fromleaf;
- struct frame_info *frame;
+init_extra_frame_info (int fromleaf, struct frame_info *frame)
{
int flags;
int framesize;
a frame pointer calls code without a frame pointer. */
CORE_ADDR
-frame_chain (frame)
- struct frame_info *frame;
+frame_chain (struct frame_info *frame)
{
int my_framesize, caller_framesize;
struct unwind_table_entry *u;
CORE_ADDR frame_base;
struct frame_info *tmp_frame;
+ /* A frame in the current frame list, or zero. */
+ struct frame_info *saved_regs_frame = 0;
+ /* Where the registers were saved in saved_regs_frame.
+ If saved_regs_frame is zero, this is garbage. */
+ struct frame_saved_regs saved_regs;
+
CORE_ADDR caller_pc;
struct minimal_symbol *min_frame_symbol;
We use information from unwind descriptors to determine if %r3
is saved into the stack (Entry_GR field has this information). */
- tmp_frame = frame;
- while (tmp_frame)
+ for (tmp_frame = frame; tmp_frame; tmp_frame = tmp_frame->next)
{
u = find_unwind_entry (tmp_frame->pc);
return (CORE_ADDR) 0;
}
- /* Entry_GR specifies the number of callee-saved general registers
- saved in the stack. It starts at %r3, so %r3 would be 1. */
- if (u->Entry_GR >= 1 || u->Save_SP
+ if (u->Save_SP
|| tmp_frame->signal_handler_caller
|| pc_in_interrupt_handler (tmp_frame->pc))
break;
- else
- tmp_frame = tmp_frame->next;
+
+ /* Entry_GR specifies the number of callee-saved general registers
+ saved in the stack. It starts at %r3, so %r3 would be 1. */
+ if (u->Entry_GR >= 1)
+ {
+ /* The unwind entry claims that r3 is saved here. However,
+ in optimized code, GCC often doesn't actually save r3.
+ We'll discover this if we look at the prologue. */
+ get_frame_saved_regs (tmp_frame, &saved_regs);
+ saved_regs_frame = tmp_frame;
+
+ /* If we have an address for r3, that's good. */
+ if (saved_regs.regs[FP_REGNUM])
+ break;
+ }
}
if (tmp_frame)
/* %r3 was saved somewhere in the stack. Dig it out. */
else
{
- struct frame_saved_regs saved_regs;
-
/* Sick.
For optimization purposes many kernels don't have the
fail miserably if the function which performs the
system call has a variable sized stack frame. */
- get_frame_saved_regs (tmp_frame, &saved_regs);
+ if (tmp_frame != saved_regs_frame)
+ get_frame_saved_regs (tmp_frame, &saved_regs);
/* Abominable hack. */
if (current_target.to_has_execution == 0
}
else
{
- struct frame_saved_regs saved_regs;
-
/* Get the innermost frame. */
tmp_frame = frame;
while (tmp_frame->next != NULL)
tmp_frame = tmp_frame->next;
- get_frame_saved_regs (tmp_frame, &saved_regs);
+ if (tmp_frame != saved_regs_frame)
+ get_frame_saved_regs (tmp_frame, &saved_regs);
+
/* Abominable hack. See above. */
if (current_target.to_has_execution == 0
&& ((saved_regs.regs[FLAGS_REGNUM]
was compiled with gcc. */
int
-hppa_frame_chain_valid (chain, thisframe)
- CORE_ADDR chain;
- struct frame_info *thisframe;
+hppa_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe)
{
struct minimal_symbol *msym_us;
struct minimal_symbol *msym_start;
to be aligned to a 64-byte boundary. */
void
-push_dummy_frame (inf_status)
- struct inferior_status *inf_status;
+push_dummy_frame (struct inferior_status *inf_status)
{
CORE_ADDR sp, pc, pcspace;
register int regnum;
We also need a number of horrid hacks to deal with lossage in the
PC queue registers (apparently they're not valid when the in syscall
bit is set). */
- pc = target_read_pc (inferior_pid);
+ pc = target_read_pc (inferior_ptid);
int_buffer = read_register (FLAGS_REGNUM);
if (int_buffer & 0x2)
{
}
static void
-find_dummy_frame_regs (frame, frame_saved_regs)
- struct frame_info *frame;
- struct frame_saved_regs *frame_saved_regs;
+find_dummy_frame_regs (struct frame_info *frame,
+ struct frame_saved_regs *frame_saved_regs)
{
CORE_ADDR fp = frame->frame;
int i;
}
void
-hppa_pop_frame ()
+hppa_pop_frame (void)
{
register struct frame_info *frame = get_current_frame ();
register CORE_ADDR fp, npc, target_pc;
breakpoint->silent = 1;
/* So we can clean things up. */
- old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
/* Start up the inferior. */
clear_proceed_status ();
proceed_to_finish = 1;
- proceed ((CORE_ADDR) - 1, TARGET_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
/* Perform our cleanups. */
do_cleanups (old_chain);
queue space registers. */
static int
-restore_pc_queue (fsr)
- struct frame_saved_regs *fsr;
+restore_pc_queue (struct frame_saved_regs *fsr)
{
CORE_ADDR pc = read_pc ();
CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM],
any other choice? Is there *any* way to do this stuff with
ptrace() or some equivalent?). */
resume (1, 0);
- target_wait (inferior_pid, &w);
+ target_wait (inferior_ptid, &w);
if (w.kind == TARGET_WAITKIND_SIGNALLED)
{
return 1;
}
+
+#ifdef PA20W_CALLING_CONVENTIONS
+
/* This function pushes a stack frame with arguments as part of the
inferior function calling mechanism.
- For PAs the stack always grows to higher addresses. However the arguments
- may grow to either higher or lower addresses depending on which ABI is
- currently in use.
+ This is the version for the PA64, in which later arguments appear
+ at higher addresses. (The stack always grows towards higher
+ addresses.)
We simply allocate the appropriate amount of stack space and put
arguments into their proper slots. The call dummy code will copy
arguments into registers as needed by the ABI.
- Note for the PA64 ABI we load up the argument pointer since the caller
- must provide the argument pointer to the callee. */
+ This ABI also requires that the caller provide an argument pointer
+ to the callee, so we do that too. */
CORE_ADDR
-hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
/* array of arguments' offsets */
int *offset = (int *) alloca (nargs * sizeof (int));
/* Iterate over each argument provided by the user. */
for (i = 0; i < nargs; i++)
{
- lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
+ struct type *arg_type = VALUE_TYPE (args[i]);
+
+ /* Integral scalar values smaller than a register are padded on
+ the left. We do this by promoting them to full-width,
+ although the ABI says to pad them with garbage. */
+ if (is_integral_type (arg_type)
+ && TYPE_LENGTH (arg_type) < REGISTER_SIZE)
+ {
+ args[i] = value_cast ((TYPE_UNSIGNED (arg_type)
+ ? builtin_type_unsigned_long
+ : builtin_type_long),
+ args[i]);
+ arg_type = VALUE_TYPE (args[i]);
+ }
+
+ lengths[i] = TYPE_LENGTH (arg_type);
/* Align the size of the argument to the word size for this
target. */
bytes_reserved = (lengths[i] + REGISTER_SIZE - 1) & -REGISTER_SIZE;
-#ifdef ARGS_GROW_DOWNWARD
- offset[i] = cum_bytes_reserved + lengths[i];
-#else
- /* If the arguments grow towards lower addresses, then we want
- offset[i] to point to the start of the argument rather than
- the end of the argument. */
offset[i] = cum_bytes_reserved;
- offset[i] += (lengths[i] < REGISTER_SIZE
- ? REGISTER_SIZE - lengths[i] : 0);
-#endif
+ /* Aggregates larger than eight bytes (the only types larger
+ than eight bytes we have) are aligned on a 16-byte boundary,
+ possibly padded on the right with garbage. This may leave an
+ empty word on the stack, and thus an unused register, as per
+ the ABI. */
+ if (bytes_reserved > 8)
+ {
+ /* Round up the offset to a multiple of two slots. */
+ int new_offset = ((offset[i] + 2*REGISTER_SIZE-1)
+ & -(2*REGISTER_SIZE));
- /* If the argument is a double word argument, then it needs to be
- double word aligned.
+ /* Note the space we've wasted, if any. */
+ bytes_reserved += new_offset - offset[i];
+ offset[i] = new_offset;
+ }
+
+ cum_bytes_reserved += bytes_reserved;
+ }
+
+ /* CUM_BYTES_RESERVED already accounts for all the arguments
+ passed by the user. However, the ABIs mandate minimum stack space
+ allocations for outgoing arguments.
+
+ The ABIs also mandate minimum stack alignments which we must
+ preserve. */
+ cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved);
+ sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
+
+ /* Now write each of the args at the proper offset down the stack. */
+ for (i = 0; i < nargs; i++)
+ write_memory (orig_sp + offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
+
+ /* If a structure has to be returned, set up register 28 to hold its
+ address */
+ if (struct_return)
+ write_register (28, struct_addr);
+
+ /* For the PA64 we must pass a pointer to the outgoing argument list.
+ The ABI mandates that the pointer should point to the first byte of
+ storage beyond the register flushback area.
+
+ However, the call dummy expects the outgoing argument pointer to
+ be passed in register %r4. */
+ write_register (4, orig_sp + REG_PARM_STACK_SPACE);
+
+ /* ?!? This needs further work. We need to set up the global data
+ pointer for this procedure. This assumes the same global pointer
+ for every procedure. The call dummy expects the dp value to
+ be passed in register %r6. */
+ write_register (6, read_register (27));
+
+ /* The stack will have 64 bytes of additional space for a frame marker. */
+ return sp + 64;
+}
+
+#else
+
+/* This function pushes a stack frame with arguments as part of the
+ inferior function calling mechanism.
+
+ This is the version of the function for the 32-bit PA machines, in
+ which later arguments appear at lower addresses. (The stack always
+ grows towards higher addresses.)
+
+ We simply allocate the appropriate amount of stack space and put
+ arguments into their proper slots. The call dummy code will copy
+ arguments into registers as needed by the ABI. */
+
+CORE_ADDR
+hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ /* array of arguments' offsets */
+ int *offset = (int *) alloca (nargs * sizeof (int));
+
+ /* array of arguments' lengths: real lengths in bytes, not aligned to
+ word size */
+ int *lengths = (int *) alloca (nargs * sizeof (int));
+
+ /* The number of stack bytes occupied by the current argument. */
+ int bytes_reserved;
+
+ /* The total number of bytes reserved for the arguments. */
+ int cum_bytes_reserved = 0;
+
+ /* Similarly, but aligned. */
+ int cum_bytes_aligned = 0;
+ int i;
+
+ /* Iterate over each argument provided by the user. */
+ for (i = 0; i < nargs; i++)
+ {
+ lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
+
+ /* Align the size of the argument to the word size for this
+ target. */
+ bytes_reserved = (lengths[i] + REGISTER_SIZE - 1) & -REGISTER_SIZE;
+
+ offset[i] = cum_bytes_reserved + lengths[i];
- ?!? I do not think this code is correct when !ARGS_GROW_DOWNWAR. */
+ /* If the argument is a double word argument, then it needs to be
+ double word aligned. */
if ((bytes_reserved == 2 * REGISTER_SIZE)
- && (offset[i] % 2 * REGISTER_SIZE))
+ && (offset[i] % 2 * REGISTER_SIZE))
{
int new_offset = 0;
/* BYTES_RESERVED is already aligned to the word, so we put
}
- /* CUM_BYTES_RESERVED already accounts for all the arguments
- passed by the user. However, the ABIs mandate minimum stack space
+ /* CUM_BYTES_RESERVED already accounts for all the arguments passed
+ by the user. However, the ABI mandates minimum stack space
allocations for outgoing arguments.
- The ABIs also mandate minimum stack alignments which we must
+ The ABI also mandates minimum stack alignments which we must
preserve. */
cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved);
sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
/* Now write each of the args at the proper offset down the stack.
-
- The two ABIs write arguments in different directions using different
- starting points. What fun.
-
?!? We need to promote values to a full register instead of skipping
words in the stack. */
-#ifndef ARGS_GROW_DOWNWARD
- for (i = 0; i < nargs; i++)
- write_memory (orig_sp + offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
-#else
for (i = 0; i < nargs; i++)
write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
-#endif
/* If a structure has to be returned, set up register 28 to hold its
address */
if (struct_return)
write_register (28, struct_addr);
-#ifndef ARGS_GROW_DOWNWARD
- /* For the PA64 we must pass a pointer to the outgoing argument list.
- The ABI mandates that the pointer should point to the first byte of
- storage beyond the register flushback area.
-
- However, the call dummy expects the outgoing argument pointer to
- be passed in register %r4. */
- write_register (4, orig_sp + REG_PARM_STACK_SPACE);
-
- /* ?!? This needs further work. We need to set up the global data
- pointer for this procedure. This assumes the same global pointer
- for every procedure. The call dummy expects the dp value to
- be passed in register %r6. */
- write_register (6, read_register (27));
-#endif
-
/* The stack will have 32 bytes of additional space for a frame marker. */
return sp + 32;
}
+#endif
/* elz: this function returns a value which is built looking at the given address.
It is called from call_function_by_hand, in case we need to return a
This function does the same stuff as value_being_returned in values.c, but
gets the value from the stack rather than from the buffer where all the
registers were saved when the function called completed. */
-value_ptr
-hppa_value_returned_from_stack (valtype, addr)
- register struct type *valtype;
- CORE_ADDR addr;
+struct value *
+hppa_value_returned_from_stack (register struct type *valtype, CORE_ADDR addr)
{
- register value_ptr val;
+ register struct value *val;
val = allocate_value (valtype);
CHECK_TYPEDEF (valtype);
man entry for shl_findsym */
CORE_ADDR
-find_stub_with_shl_get (function, handle)
- struct minimal_symbol *function;
- CORE_ADDR handle;
+find_stub_with_shl_get (struct minimal_symbol *function, CORE_ADDR handle)
{
struct symbol *get_sym, *symbol2;
struct minimal_symbol *buff_minsym, *msymbol;
struct type *ftype;
- value_ptr *args;
- value_ptr funcval, val;
+ struct value **args;
+ struct value *funcval;
+ struct value *val;
int x, namelen, err_value, tmp = -1;
CORE_ADDR endo_buff_addr, value_return_addr, errno_return_addr;
CORE_ADDR stub_addr;
- args = (value_ptr *) alloca (sizeof (value_ptr) * 8); /* 6 for the arguments and one null one??? */
+ args = alloca (sizeof (struct value *) * 8); /* 6 for the arguments and one null one??? */
funcval = find_function_in_inferior ("__d_shl_get");
get_sym = lookup_symbol ("__d_shl_get", NULL, VAR_NAMESPACE, NULL, NULL);
buff_minsym = lookup_minimal_symbol ("__buffer", NULL, NULL);
/* now prepare the arguments for the call */
args[0] = value_from_longest (TYPE_FIELD_TYPE (ftype, 0), 12);
- args[1] = value_from_longest (TYPE_FIELD_TYPE (ftype, 1), SYMBOL_VALUE_ADDRESS (msymbol));
- args[2] = value_from_longest (TYPE_FIELD_TYPE (ftype, 2), endo_buff_addr);
+ args[1] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 1), SYMBOL_VALUE_ADDRESS (msymbol));
+ args[2] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 2), endo_buff_addr);
args[3] = value_from_longest (TYPE_FIELD_TYPE (ftype, 3), TYPE_PROCEDURE);
- args[4] = value_from_longest (TYPE_FIELD_TYPE (ftype, 4), value_return_addr);
- args[5] = value_from_longest (TYPE_FIELD_TYPE (ftype, 5), errno_return_addr);
+ args[4] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 4), value_return_addr);
+ args[5] = value_from_pointer (TYPE_FIELD_TYPE (ftype, 5), errno_return_addr);
/* now call the function */
Please contact Jeff Law (law@cygnus.com) before changing this code. */
CORE_ADDR
-hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
- char *dummy;
- CORE_ADDR pc;
- CORE_ADDR fun;
- int nargs;
- value_ptr *args;
- struct type *type;
- int gcc_p;
+hppa_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
+ struct value **args, struct type *type, int gcc_p)
{
CORE_ADDR dyncall_addr;
struct minimal_symbol *msymbol;
CORE_ADDR solib_handle = 0;
/* Nonzero if we will use GCC's PLT call routine. This routine must be
- passed an import stub, not a PLABEL. It is also necessary to set %r19
- (the PIC register) before performing the call.
+ passed an import stub, not a PLABEL. It is also necessary to set %r19
+ (the PIC register) before performing the call.
If zero, then we are using __d_plt_call (HP's PLT call routine) or we
are calling the target directly. When using __d_plt_call we want to
such that it points to the PC value written immediately above
(ie the call dummy). */
resume (1, 0);
- target_wait (inferior_pid, &w);
+ target_wait (inferior_ptid, &w);
resume (1, 0);
- target_wait (inferior_pid, &w);
+ target_wait (inferior_ptid, &w);
/* Restore the two instructions at the old PC locations. */
*((int *) buf) = inst1;
write_register (5, fun);
/* We need to see if this objfile has a different DP value than our
- own (it could be a shared library for example. */
+ own (it could be a shared library for example). */
ALL_OBJFILES (objfile)
{
struct obj_section *s;
stub rather than the export stub or real function for lazy binding
to work correctly
- /* If we are using the gcc PLT call routine, then we need to
+ If we are using the gcc PLT call routine, then we need to
get the import stub for the target function. */
if (using_gcc_plt_call && som_solib_get_got_by_pc (fun))
{
funsymbol = lookup_minimal_symbol_by_pc (fun);
if (!funsymbol)
- error ("Unable to find minimal symbol for target fucntion.\n");
+ error ("Unable to find minimal symbol for target function.\n");
/* Search all the object files for an import symbol with the
right name. */
/* It must also be an import stub. */
u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
- if (!u
- || (u->stub_unwind.stub_type != IMPORT)
- && u->stub_unwind.stub_type != IMPORT_SHLIB)
+ if (u == NULL
+ || (u->stub_unwind.stub_type != IMPORT
+#ifdef GDB_NATIVE_HPUX_11
+ /* Sigh. The hpux 10.20 dynamic linker will blow
+ chunks if we perform a call to an unbound function
+ via the IMPORT_SHLIB stub. The hpux 11.00 dynamic
+ linker will blow chunks if we do not call the
+ unbound function via the IMPORT_SHLIB stub.
+
+ We currently have no way to select bevahior on just
+ the target. However, we only support HPUX/SOM in
+ native mode. So we conditinalize on a native
+ #ifdef. Ugly. Ugly. Ugly */
+ && u->stub_unwind.stub_type != IMPORT_SHLIB
+#endif
+ ))
continue;
/* OK. Looks like the correct import stub. */
newfun = SYMBOL_VALUE (stub_symbol);
fun = newfun;
+
+ /* If we found an IMPORT stub, then we want to stop
+ searching now. If we found an IMPORT_SHLIB, we want
+ to continue the search in the hopes that we will find
+ an IMPORT stub. */
+ if (u->stub_unwind.stub_type == IMPORT)
+ break;
}
}
if (flags & 2)
return pc;
#ifndef GDB_TARGET_IS_PA_ELF
- else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid)))
+ else if (som_solib_get_got_by_pc (target_read_pc (inferior_ptid)))
return pc;
#endif
else
We'll return zero in that case, rather than attempting to read it
and cause a warning. */
CORE_ADDR
-target_read_fp (pid)
- int pid;
+target_read_fp (int pid)
{
int flags = read_register (FLAGS_REGNUM);
bits. */
CORE_ADDR
-target_read_pc (pid)
- int pid;
+target_read_pc (ptid_t ptid)
{
- int flags = read_register_pid (FLAGS_REGNUM, pid);
+ int flags = read_register_pid (FLAGS_REGNUM, ptid);
/* The following test does not belong here. It is OS-specific, and belongs
in native code. */
/* Test SS_INSYSCALL */
if (flags & 2)
- return read_register_pid (31, pid) & ~0x3;
+ return read_register_pid (31, ptid) & ~0x3;
- return read_register_pid (PC_REGNUM, pid) & ~0x3;
+ return read_register_pid (PC_REGNUM, ptid) & ~0x3;
}
/* Write out the PC. If currently in a syscall, then also write the new
PC value into %r31. */
void
-target_write_pc (v, pid)
- CORE_ADDR v;
- int pid;
+target_write_pc (CORE_ADDR v, ptid_t ptid)
{
- int flags = read_register_pid (FLAGS_REGNUM, pid);
+ int flags = read_register_pid (FLAGS_REGNUM, ptid);
/* The following test does not belong here. It is OS-specific, and belongs
in native code. */
privilege bits set correctly. */
/* Test SS_INSYSCALL */
if (flags & 2)
- write_register_pid (31, v | 0x3, pid);
+ write_register_pid (31, v | 0x3, ptid);
- write_register_pid (PC_REGNUM, v, pid);
- write_register_pid (NPC_REGNUM, v + 4, pid);
+ write_register_pid (PC_REGNUM, v, ptid);
+ write_register_pid (NPC_REGNUM, v + 4, ptid);
}
/* return the alignment of a type in bytes. Structures have the maximum
alignment required by their fields. */
static int
-hppa_alignof (type)
- struct type *type;
+hppa_alignof (struct type *type)
{
int max_align, align, i;
CHECK_TYPEDEF (type);
/* Print the register regnum, or all registers if regnum is -1 */
void
-pa_do_registers_info (regnum, fpregs)
- int regnum;
- int fpregs;
+pa_do_registers_info (int regnum, int fpregs)
{
char raw_regs[REGISTER_BYTES];
int i;
/********** new function ********************/
void
-pa_do_strcat_registers_info (regnum, fpregs, stream, precision)
- int regnum;
- int fpregs;
- GDB_FILE *stream;
- enum precision_type precision;
+pa_do_strcat_registers_info (int regnum, int fpregs, struct ui_file *stream,
+ enum precision_type precision)
{
char raw_regs[REGISTER_BYTES];
int i;
Note that reg_val is really expected to be an array of longs,
with two elements. */
static void
-pa_register_look_aside (raw_regs, regnum, raw_val)
- char *raw_regs;
- int regnum;
- long *raw_val;
+pa_register_look_aside (char *raw_regs, int regnum, long *raw_val)
{
static int know_which = 0; /* False */
for (i = start; i < 2; i++)
{
errno = 0;
- raw_val[i] = call_ptrace (PT_RUREGS, inferior_pid,
+ raw_val[i] = call_ptrace (PT_RUREGS, PIDGET (inferior_ptid),
(PTRACE_ARG3_TYPE) regaddr, 0);
if (errno != 0)
{
/* "Info all-reg" command */
static void
-pa_print_registers (raw_regs, regnum, fpregs)
- char *raw_regs;
- int regnum;
- int fpregs;
+pa_print_registers (char *raw_regs, int regnum, int fpregs)
{
int i, j;
/* Alas, we are compiled so that "long long" is 32 bits */
/************* new function ******************/
static void
-pa_strcat_registers (raw_regs, regnum, fpregs, stream)
- char *raw_regs;
- int regnum;
- int fpregs;
- GDB_FILE *stream;
+pa_strcat_registers (char *raw_regs, int regnum, int fpregs,
+ struct ui_file *stream)
{
int i, j;
long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */
}
static void
-pa_print_fp_reg (i)
- int i;
+pa_print_fp_reg (int i)
{
char raw_buffer[MAX_REGISTER_RAW_SIZE];
char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
/*************** new function ***********************/
static void
-pa_strcat_fp_reg (i, stream, precision)
- int i;
- GDB_FILE *stream;
- enum precision_type precision;
+pa_strcat_fp_reg (int i, struct ui_file *stream, enum precision_type precision)
{
char raw_buffer[MAX_REGISTER_RAW_SIZE];
char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
just shared library trampolines (import, export). */
int
-in_solib_call_trampoline (pc, name)
- CORE_ADDR pc;
- char *name;
+in_solib_call_trampoline (CORE_ADDR pc, char *name)
{
struct minimal_symbol *minsym;
struct unwind_table_entry *u;
static CORE_ADDR dyncall = 0;
static CORE_ADDR sr4export = 0;
-/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
- new exec file */
+#ifdef GDB_TARGET_IS_HPPA_20W
+ /* PA64 has a completely different stub/trampoline scheme. Is it
+ better? Maybe. It's certainly harder to determine with any
+ certainty that we are in a stub because we can not refer to the
+ unwinders to help.
+
+ The heuristic is simple. Try to lookup the current PC value in th
+ minimal symbol table. If that fails, then assume we are not in a
+ stub and return.
+
+ Then see if the PC value falls within the section bounds for the
+ section containing the minimal symbol we found in the first
+ step. If it does, then assume we are not in a stub and return.
+
+ Finally peek at the instructions to see if they look like a stub. */
+ {
+ struct minimal_symbol *minsym;
+ asection *sec;
+ CORE_ADDR addr;
+ int insn, i;
+
+ minsym = lookup_minimal_symbol_by_pc (pc);
+ if (! minsym)
+ return 0;
+
+ sec = SYMBOL_BFD_SECTION (minsym);
+
+ if (sec->vma <= pc
+ && sec->vma + sec->_cooked_size < pc)
+ return 0;
+
+ /* We might be in a stub. Peek at the instructions. Stubs are 3
+ instructions long. */
+ insn = read_memory_integer (pc, 4);
+
+ /* Find out where we think we are within the stub. */
+ if ((insn & 0xffffc00e) == 0x53610000)
+ addr = pc;
+ else if ((insn & 0xffffffff) == 0xe820d000)
+ addr = pc - 4;
+ else if ((insn & 0xffffc00e) == 0x537b0000)
+ addr = pc - 8;
+ else
+ return 0;
+
+ /* Now verify each insn in the range looks like a stub instruction. */
+ insn = read_memory_integer (addr, 4);
+ if ((insn & 0xffffc00e) != 0x53610000)
+ return 0;
+
+ /* Now verify each insn in the range looks like a stub instruction. */
+ insn = read_memory_integer (addr + 4, 4);
+ if ((insn & 0xffffffff) != 0xe820d000)
+ return 0;
+
+ /* Now verify each insn in the range looks like a stub instruction. */
+ insn = read_memory_integer (addr + 8, 4);
+ if ((insn & 0xffffc00e) != 0x537b0000)
+ return 0;
+
+ /* Looks like a stub. */
+ return 1;
+ }
+#endif
+
+ /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+ new exec file */
/* First see if PC is in one of the two C-library trampolines. */
if (!dyncall)
just shared library trampolines (import, export). */
int
-in_solib_return_trampoline (pc, name)
- CORE_ADDR pc;
- char *name;
+in_solib_return_trampoline (CORE_ADDR pc, char *name)
{
struct unwind_table_entry *u;
used in dynamic executables. */
CORE_ADDR
-skip_trampoline_code (pc, name)
- CORE_ADDR pc;
- char *name;
+skip_trampoline_code (CORE_ADDR pc, char *name)
{
long orig_pc = pc;
long prev_inst, curr_inst, loc;
struct minimal_symbol *msym;
struct unwind_table_entry *u;
-
-/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
- new exec file */
+ /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+ new exec file */
if (!dyncall)
{
This only handles instructions commonly found in prologues. */
static int
-prologue_inst_adjust_sp (inst)
- unsigned long inst;
+prologue_inst_adjust_sp (unsigned long inst)
{
/* This must persist across calls. */
static int save_high21;
/* std,ma X,D(sp) */
if ((inst & 0xffe00008) == 0x73c00008)
- return (inst & 0x1 ? -1 << 16 : 0) | (((inst >> 4) & 0x3ff) << 3);
+ return (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3);
/* addil high21,%r1; ldo low11,(%r1),%r30)
save high bits in save_high21 for later use. */
/* Return nonzero if INST is a branch of some kind, else return zero. */
static int
-is_branch (inst)
- unsigned long inst;
+is_branch (unsigned long inst)
{
switch (inst >> 26)
{
zero it INST does not save a GR. */
static int
-inst_saves_gr (inst)
- unsigned long inst;
+inst_saves_gr (unsigned long inst)
{
/* Does it look like a stw? */
if ((inst >> 26) == 0x1a || (inst >> 26) == 0x1b
FIXME: What about argument stores with the HP compiler in ANSI mode? */
static int
-inst_saves_fr (inst)
- unsigned long inst;
+inst_saves_fr (unsigned long inst)
{
/* is this an FSTD ? */
if ((inst & 0xfc00dfc0) == 0x2c001200)
CORE_ADDR
-skip_prologue_hard_way (pc)
- CORE_ADDR pc;
+skip_prologue_hard_way (CORE_ADDR pc)
{
char buf[4];
CORE_ADDR orig_pc = pc;
|| (inst & 0xffffc00c) == 0x73c10008)
save_sp = 0;
+ /* Are we loading some register with an offset from the argument
+ pointer? */
+ if ((inst & 0xffe00000) == 0x37a00000
+ || (inst & 0xffffffe0) == 0x081d0240)
+ {
+ pc += 4;
+ continue;
+ }
+
/* Account for general and floating-point register saves. */
reg_num = inst_saves_gr (inst);
save_gr &= ~(1 << reg_num);
FIXME. Can still die if we have a mix of GR and FR argument
stores! */
- if (reg_num >= 23 && reg_num <= 26)
+ if (reg_num >= (TARGET_PTR_BIT == 64 ? 19 : 23) && reg_num <= 26)
{
- while (reg_num >= 23 && reg_num <= 26)
+ while (reg_num >= (TARGET_PTR_BIT == 64 ? 19 : 23) && reg_num <= 26)
{
pc += 4;
status = target_read_memory (pc, buf, 4);
save. */
if ((inst & 0xfc000000) == 0x34000000
&& inst_saves_fr (next_inst) >= 4
- && inst_saves_fr (next_inst) <= 7)
+ && inst_saves_fr (next_inst) <= (TARGET_PTR_BIT == 64 ? 11 : 7))
{
/* So we drop into the code below in a reasonable state. */
reg_num = inst_saves_fr (next_inst);
This is a kludge as on the HP compiler sets this bit and it
never does prologue scheduling. So once we see one, skip past
all of them. */
- if (reg_num >= 4 && reg_num <= 7)
+ if (reg_num >= 4 && reg_num <= (TARGET_PTR_BIT == 64 ? 11 : 7))
{
- while (reg_num >= 4 && reg_num <= 7)
+ while (reg_num >= 4 && reg_num <= (TARGET_PTR_BIT == 64 ? 11 : 7))
{
pc += 8;
status = target_read_memory (pc, buf, 4);
we can determine it from the debug symbols. Else return zero. */
static CORE_ADDR
-after_prologue (pc)
- CORE_ADDR pc;
+after_prologue (CORE_ADDR pc)
{
struct symtab_and_line sal;
CORE_ADDR func_addr, func_end;
stuff some day. */
CORE_ADDR
-hppa_skip_prologue (pc)
- CORE_ADDR pc;
+hppa_skip_prologue (CORE_ADDR pc)
{
unsigned long inst;
int offset;
the address we return for it IS the sp for the next frame. */
void
-hppa_frame_find_saved_regs (frame_info, frame_saved_regs)
- struct frame_info *frame_info;
- struct frame_saved_regs *frame_saved_regs;
+hppa_frame_find_saved_regs (struct frame_info *frame_info,
+ struct frame_saved_regs *frame_saved_regs)
{
CORE_ADDR pc;
struct unwind_table_entry *u;
int status, i, reg;
char buf[4];
int fp_loc = -1;
+ int final_iteration;
/* Zero out everything. */
memset (frame_saved_regs, '\0', sizeof (struct frame_saved_regs));
Some unexpected things are expected with debugging optimized code, so
we allow this routine to walk past user instructions in optimized
GCC code. */
- while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
+ final_iteration = 0;
+ while ((save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
+ && pc <= frame_info->pc)
{
status = target_read_memory (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
/* There are limited ways to store the return pointer into the
stack. */
- if (inst == 0x6bc23fd9 || inst == 0x0fc212c1)
+ if (inst == 0x6bc23fd9) /* stw rp,-0x14(sr0,sp) */
{
save_rp = 0;
frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20;
}
+ else if (inst == 0x0fc212c1) /* std rp,-0x10(sr0,sp) */
+ {
+ save_rp = 0;
+ frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 16;
+ }
/* Note if we saved SP into the stack. This also happens to indicate
the location of the saved frame pointer. */
- if ((inst & 0xffffc000) == 0x6fc10000
- || (inst & 0xffffc00c) == 0x73c10008)
+ if ( (inst & 0xffffc000) == 0x6fc10000 /* stw,ma r1,N(sr0,sp) */
+ || (inst & 0xffffc00c) == 0x73c10008) /* std,ma r1,N(sr0,sp) */
{
frame_saved_regs->regs[FP_REGNUM] = frame_info->frame;
save_sp = 0;
CORE_ADDR offset;
if ((inst >> 26) == 0x1c)
- offset = (inst & 0x1 ? -1 << 16 : 0) | (((inst >> 4) & 0x3ff) << 3);
+ offset = (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3);
else if ((inst >> 26) == 0x03)
offset = low_sign_extend (inst & 0x1f, 5);
else
}
}
- /* Quit if we hit any kind of branch. This can happen if a prologue
- instruction is in the delay slot of the first call/branch. */
- if (is_branch (inst))
+ /* Quit if we hit any kind of branch the previous iteration. */
+ if (final_iteration)
break;
+ /* We want to look precisely one instruction beyond the branch
+ if we have not found everything yet. */
+ if (is_branch (inst))
+ final_iteration = 1;
+
/* Bump the PC. */
pc += 4;
}
0 => success
1 => failure */
int
-setup_d_pid_in_inferior ()
+setup_d_pid_in_inferior (void)
{
CORE_ADDR anaddr;
struct minimal_symbol *msymbol;
}
anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
- store_unsigned_integer (buf, 4, inferior_pid); /* FIXME 32x64? */
+ store_unsigned_integer (buf, 4, PIDGET (inferior_ptid)); /* FIXME 32x64? */
if (target_write_memory (anaddr, buf, 4)) /* FIXME 32x64? */
{
warning ("Unable to write __d_pid");
1 => success */
static int
-initialize_hp_cxx_exception_support ()
+initialize_hp_cxx_exception_support (void)
{
struct symtabs_and_lines sals;
struct cleanup *old_chain;
if (!eh_notify_callback_addr)
{
/* We can get here either if there is no plabel in the export list
- for the main image, or if something strange happened (??) */
+ for the main image, or if something strange happened (?) */
warning ("Couldn't find a plabel (indirect function label) for the exception callback.");
warning ("GDB will not be able to intercept exception events.");
return 0;
address was found. */
struct symtab_and_line *
-child_enable_exception_callback (kind, enable)
- enum exception_event_kind kind;
- int enable;
+child_enable_exception_callback (enum exception_event_kind kind, int enable)
{
char buf[4];
if (enable)
{
/* Ensure that __d_pid is set up correctly -- end.c code checks this. :-( */
- if (inferior_pid > 0)
+ if (PIDGET (inferior_ptid) > 0)
{
if (setup_d_pid_in_inferior ())
return (struct symtab_and_line *) -1;
and where it will be caught. More information may be reported
in the future */
struct exception_event_record *
-child_get_current_exception_event ()
+child_get_current_exception_event (void)
{
CORE_ADDR event_kind;
CORE_ADDR throw_addr;
}
static void
-unwind_command (exp, from_tty)
- char *exp;
- int from_tty;
+unwind_command (char *exp, int from_tty)
{
CORE_ADDR address;
struct unwind_table_entry *u;
printf_unfiltered ("\n\tregion_end = ");
print_address (u->region_end, gdb_stdout);
-#ifdef __STDC__
#define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD);
-#else
-#define pif(FLD) if (u->FLD) printf_unfiltered (" FLD");
-#endif
printf_unfiltered ("\n\tflags =");
pif (Cannot_unwind);
putchar_unfiltered ('\n');
-#ifdef __STDC__
#define pin(FLD) printf_unfiltered ("\t"#FLD" = 0x%x\n", u->FLD);
-#else
-#define pin(FLD) printf_unfiltered ("\tFLD = 0x%x\n", u->FLD);
-#endif
pin (Region_description);
pin (Entry_FR);
For these reasons, we have to violate information hiding and
call "breakpoint_here_p". If core gdb thinks there is a bpt
here, that's what counts, as core gdb is the one which is
- putting the BPT instruction in and taking it out. */
+ putting the BPT instruction in and taking it out.
+
+ Note that this implementation is potentially redundant now that
+ default_prepare_to_proceed() has been added.
+
+ FIXME This may not support switching threads after Ctrl-C
+ correctly. The default implementation does support this. */
int
-hppa_prepare_to_proceed ()
+hppa_prepare_to_proceed (void)
{
pid_t old_thread;
pid_t current_thread;
- old_thread = hppa_switched_threads (inferior_pid);
+ old_thread = hppa_switched_threads (PIDGET (inferior_ptid));
if (old_thread != 0)
{
/* Switched over from "old_thread". Try to do
/* Yuk, shouldn't use global to specify current
thread. But that's how gdb does it. */
- current_thread = inferior_pid;
- inferior_pid = old_thread;
+ current_thread = PIDGET (inferior_ptid);
+ inferior_ptid = pid_to_ptid (old_thread);
new_pc = read_pc ();
if (new_pc != old_pc /* If at same pc, no need */
registers_changed ();
#if 0
printf ("---> PREPARE_TO_PROCEED (was %d, now %d)!\n",
- current_thread, inferior_pid);
+ current_thread, PIDGET (inferior_ptid));
#endif
return 1;
}
/* Otherwise switch back to the user-chosen thread. */
- inferior_pid = current_thread;
+ inferior_ptid = pid_to_ptid (current_thread);
new_pc = read_pc (); /* Re-prime register cache */
}
#endif /* PREPARE_TO_PROCEED */
void
-_initialize_hppa_tdep ()
+hppa_skip_permanent_breakpoint (void)
+{
+ /* To step over a breakpoint instruction on the PA takes some
+ fiddling with the instruction address queue.
+
+ When we stop at a breakpoint, the IA queue front (the instruction
+ we're executing now) points at the breakpoint instruction, and
+ the IA queue back (the next instruction to execute) points to
+ whatever instruction we would execute after the breakpoint, if it
+ were an ordinary instruction. This is the case even if the
+ breakpoint is in the delay slot of a branch instruction.
+
+ Clearly, to step past the breakpoint, we need to set the queue
+ front to the back. But what do we put in the back? What
+ instruction comes after that one? Because of the branch delay
+ slot, the next insn is always at the back + 4. */
+ write_register (PCOQ_HEAD_REGNUM, read_register (PCOQ_TAIL_REGNUM));
+ write_register (PCSQ_HEAD_REGNUM, read_register (PCSQ_TAIL_REGNUM));
+
+ write_register (PCOQ_TAIL_REGNUM, read_register (PCOQ_TAIL_REGNUM) + 4);
+ /* We can leave the tail's space the same, since there's no jump. */
+}
+
+void
+_initialize_hppa_tdep (void)
{
tm_print_insn = print_insn_hppa;