-/* Machine-dependent code which would otherwise be in inflow.c and core.c,
- for GDB, the GNU debugger. This code is for the HP PA-RISC cpu.
- Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+/* Target-dependent code for the HP PA architecture, for GDB.
+ Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995
+ Free Software Foundation, Inc.
Contributed by the Center for Software Science at the
University of Utah (pa-gdb-bugs@cs.utah.edu).
#endif
#include <sys/param.h>
-#include <sys/dir.h>
#include <signal.h>
-#include <sys/ioctl.h>
#ifdef COFF_ENCAPSULATE
#include "a.out.encap.h"
#else
-#include <a.out.h>
#endif
#ifndef N_SET_MAGIC
#define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
/*#include <sys/user.h> After a.out.h */
#include <sys/file.h>
#include <sys/stat.h>
-#include <machine/psl.h>
#include "wait.h"
#include "gdbcore.h"
#include "symfile.h"
#include "objfiles.h"
-static int restore_pc_queue PARAMS ((struct frame_saved_regs *fsr));
-static int hppa_alignof PARAMS ((struct type *arg));
+static int restore_pc_queue PARAMS ((struct frame_saved_regs *));
+
+static int hppa_alignof PARAMS ((struct type *));
+
+CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *));
+
+static int prologue_inst_adjust_sp PARAMS ((unsigned long));
+
+static int is_branch PARAMS ((unsigned long));
+
+static int inst_saves_gr PARAMS ((unsigned long));
+
+static int inst_saves_fr PARAMS ((unsigned long));
+
+static int pc_in_interrupt_handler PARAMS ((CORE_ADDR));
+
+static int pc_in_linker_stub PARAMS ((CORE_ADDR));
+
+static int compare_unwind_entries PARAMS ((const struct unwind_table_entry *,
+ const struct unwind_table_entry *));
+
+static void read_unwind_info PARAMS ((struct objfile *));
+
+static void internalize_unwinds PARAMS ((struct objfile *,
+ struct unwind_table_entry *,
+ asection *, unsigned int,
+ unsigned int, CORE_ADDR));
+static void pa_print_registers PARAMS ((char *, int, int));
+static void pa_print_fp_reg PARAMS ((int));
\f
/* Routines to extract various sized constants out of hppa
(word & 0x1) << 11, 12) << 2;
}
+/* Deposit a 17 bit constant in an instruction (like bl). */
+
+unsigned int
+deposit_17 (opnd, word)
+ unsigned opnd, word;
+{
+ word |= GET_FIELD (opnd, 15 + 0, 15 + 0); /* w */
+ word |= GET_FIELD (opnd, 15 + 1, 15 + 5) << 16; /* w1 */
+ word |= GET_FIELD (opnd, 15 + 6, 15 + 6) << 2; /* w2[10] */
+ word |= GET_FIELD (opnd, 15 + 7, 15 + 16) << 3; /* w2[0..9] */
+
+ return word;
+}
+
/* extract a 17 bit constant from branch instructions, returning the
19 bit signed value. */
(word & 0x1) << 16, 17) << 2;
}
\f
-static int use_unwind = 0;
+
+/* Compare the start address for two unwind entries returning 1 if
+ the first address is larger than the second, -1 if the second is
+ larger than the first, and zero if they are equal. */
+
+static int
+compare_unwind_entries (a, b)
+ const struct unwind_table_entry *a;
+ const struct unwind_table_entry *b;
+{
+ if (a->region_start > b->region_start)
+ return 1;
+ else if (a->region_start < b->region_start)
+ return -1;
+ else
+ return 0;
+}
+
+static void
+internalize_unwinds (objfile, table, section, entries, size, text_offset)
+ struct objfile *objfile;
+ struct unwind_table_entry *table;
+ asection *section;
+ unsigned int entries, size;
+ CORE_ADDR text_offset;
+{
+ /* We will read the unwind entries into temporary memory, then
+ fill in the actual unwind table. */
+ if (size > 0)
+ {
+ unsigned long tmp;
+ unsigned i;
+ char *buf = alloca (size);
+
+ bfd_get_section_contents (objfile->obfd, section, buf, 0, size);
+
+ /* Now internalize the information being careful to handle host/target
+ endian issues. */
+ for (i = 0; i < entries; i++)
+ {
+ table[i].region_start = bfd_get_32 (objfile->obfd,
+ (bfd_byte *)buf);
+ table[i].region_start += text_offset;
+ buf += 4;
+ table[i].region_end = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
+ table[i].region_end += text_offset;
+ buf += 4;
+ tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
+ buf += 4;
+ table[i].Cannot_unwind = (tmp >> 31) & 0x1;
+ table[i].Millicode = (tmp >> 30) & 0x1;
+ table[i].Millicode_save_sr0 = (tmp >> 29) & 0x1;
+ table[i].Region_description = (tmp >> 27) & 0x3;
+ table[i].reserved1 = (tmp >> 26) & 0x1;
+ table[i].Entry_SR = (tmp >> 25) & 0x1;
+ table[i].Entry_FR = (tmp >> 21) & 0xf;
+ table[i].Entry_GR = (tmp >> 16) & 0x1f;
+ table[i].Args_stored = (tmp >> 15) & 0x1;
+ table[i].Variable_Frame = (tmp >> 14) & 0x1;
+ table[i].Separate_Package_Body = (tmp >> 13) & 0x1;
+ table[i].Frame_Extension_Millicode = (tmp >> 12 ) & 0x1;
+ table[i].Stack_Overflow_Check = (tmp >> 11) & 0x1;
+ table[i].Two_Instruction_SP_Increment = (tmp >> 10) & 0x1;
+ table[i].Ada_Region = (tmp >> 9) & 0x1;
+ table[i].reserved2 = (tmp >> 5) & 0xf;
+ table[i].Save_SP = (tmp >> 4) & 0x1;
+ table[i].Save_RP = (tmp >> 3) & 0x1;
+ table[i].Save_MRP_in_frame = (tmp >> 2) & 0x1;
+ table[i].extn_ptr_defined = (tmp >> 1) & 0x1;
+ table[i].Cleanup_defined = tmp & 0x1;
+ tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
+ buf += 4;
+ table[i].MPE_XL_interrupt_marker = (tmp >> 31) & 0x1;
+ table[i].HP_UX_interrupt_marker = (tmp >> 30) & 0x1;
+ table[i].Large_frame = (tmp >> 29) & 0x1;
+ table[i].reserved4 = (tmp >> 27) & 0x3;
+ table[i].Total_frame_size = tmp & 0x7ffffff;
+ }
+ }
+}
+
+/* Read in the backtrace information stored in the `$UNWIND_START$' section of
+ the object file. This info is used mainly by find_unwind_entry() to find
+ out the stack frame size and frame pointer used by procedures. We put
+ everything on the psymbol obstack in the objfile so that it automatically
+ gets freed when the objfile is destroyed. */
+
+static void
+read_unwind_info (objfile)
+ struct objfile *objfile;
+{
+ asection *unwind_sec, *elf_unwind_sec, *stub_unwind_sec;
+ unsigned unwind_size, elf_unwind_size, stub_unwind_size, total_size;
+ unsigned index, unwind_entries, elf_unwind_entries;
+ unsigned stub_entries, total_entries;
+ CORE_ADDR text_offset;
+ struct obj_unwind_info *ui;
+
+ text_offset = ANOFFSET (objfile->section_offsets, 0);
+ ui = (struct obj_unwind_info *)obstack_alloc (&objfile->psymbol_obstack,
+ sizeof (struct obj_unwind_info));
+
+ ui->table = NULL;
+ ui->cache = NULL;
+ ui->last = -1;
+
+ /* Get hooks to all unwind sections. Note there is no linker-stub unwind
+ section in ELF at the moment. */
+ unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_START$");
+ elf_unwind_sec = bfd_get_section_by_name (objfile->obfd, ".PARISC.unwind");
+ stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$");
+
+ /* Get sizes and unwind counts for all sections. */
+ if (unwind_sec)
+ {
+ unwind_size = bfd_section_size (objfile->obfd, unwind_sec);
+ unwind_entries = unwind_size / UNWIND_ENTRY_SIZE;
+ }
+ else
+ {
+ unwind_size = 0;
+ unwind_entries = 0;
+ }
+
+ if (elf_unwind_sec)
+ {
+ elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec);
+ elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE;
+ }
+ else
+ {
+ elf_unwind_size = 0;
+ elf_unwind_entries = 0;
+ }
+
+ if (stub_unwind_sec)
+ {
+ stub_unwind_size = bfd_section_size (objfile->obfd, stub_unwind_sec);
+ stub_entries = stub_unwind_size / STUB_UNWIND_ENTRY_SIZE;
+ }
+ else
+ {
+ stub_unwind_size = 0;
+ stub_entries = 0;
+ }
+
+ /* Compute total number of unwind entries and their total size. */
+ total_entries = unwind_entries + elf_unwind_entries + stub_entries;
+ total_size = total_entries * sizeof (struct unwind_table_entry);
+
+ /* Allocate memory for the unwind table. */
+ ui->table = obstack_alloc (&objfile->psymbol_obstack, total_size);
+ ui->last = total_entries - 1;
+
+ /* Internalize the standard unwind entries. */
+ index = 0;
+ internalize_unwinds (objfile, &ui->table[index], unwind_sec,
+ unwind_entries, unwind_size, text_offset);
+ index += unwind_entries;
+ internalize_unwinds (objfile, &ui->table[index], elf_unwind_sec,
+ elf_unwind_entries, elf_unwind_size, text_offset);
+ index += elf_unwind_entries;
+
+ /* Now internalize the stub unwind entries. */
+ if (stub_unwind_size > 0)
+ {
+ unsigned int i;
+ char *buf = alloca (stub_unwind_size);
+
+ /* Read in the stub unwind entries. */
+ bfd_get_section_contents (objfile->obfd, stub_unwind_sec, buf,
+ 0, stub_unwind_size);
+
+ /* Now convert them into regular unwind entries. */
+ for (i = 0; i < stub_entries; i++, index++)
+ {
+ /* Clear out the next unwind entry. */
+ memset (&ui->table[index], 0, sizeof (struct unwind_table_entry));
+
+ /* Convert offset & size into region_start and region_end.
+ Stuff away the stub type into "reserved" fields. */
+ ui->table[index].region_start = bfd_get_32 (objfile->obfd,
+ (bfd_byte *) buf);
+ ui->table[index].region_start += text_offset;
+ buf += 4;
+ ui->table[index].stub_type = bfd_get_8 (objfile->obfd,
+ (bfd_byte *) buf);
+ buf += 2;
+ ui->table[index].region_end
+ = ui->table[index].region_start + 4 *
+ (bfd_get_16 (objfile->obfd, (bfd_byte *) buf) - 1);
+ buf += 2;
+ }
+
+ }
+
+ /* Unwind table needs to be kept sorted. */
+ qsort (ui->table, total_entries, sizeof (struct unwind_table_entry),
+ compare_unwind_entries);
+
+ /* Keep a pointer to the unwind information. */
+ objfile->obj_private = (PTR) ui;
+}
/* Lookup the unwind (stack backtrace) info for the given PC. We search all
of the objfiles seeking the unwind table entry for this PC. Each objfile
ui = OBJ_UNWIND_INFO (objfile);
if (!ui)
- continue;
+ {
+ read_unwind_info (objfile);
+ ui = OBJ_UNWIND_INFO (objfile);
+ }
/* First, check the cache */
return NULL;
}
+/* Return the adjustment necessary to make for addresses on the stack
+ as presented by hpread.c.
+
+ This is necessary because of the stack direction on the PA and the
+ bizarre way in which someone (?) decided they wanted to handle
+ frame pointerless code in GDB. */
+int
+hpread_adjust_stack_address (func_addr)
+ CORE_ADDR func_addr;
+{
+ struct unwind_table_entry *u;
+
+ u = find_unwind_entry (func_addr);
+ if (!u)
+ return 0;
+ else
+ return u->Total_frame_size << 3;
+}
+
+/* Called to determine if PC is in an interrupt handler of some
+ kind. */
+
+static int
+pc_in_interrupt_handler (pc)
+ CORE_ADDR pc;
+{
+ struct unwind_table_entry *u;
+ struct minimal_symbol *msym_us;
+
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
+
+ /* Oh joys. HPUX sets the interrupt bit for _sigreturn even though
+ its frame isn't a pure interrupt frame. Deal with this. */
+ msym_us = lookup_minimal_symbol_by_pc (pc);
+
+ return u->HP_UX_interrupt_marker && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us));
+}
+
+/* Called when no unwind descriptor was found for PC. Returns 1 if it
+ appears that PC is in a linker stub. */
+
+static int
+pc_in_linker_stub (pc)
+ CORE_ADDR pc;
+{
+ int found_magic_instruction = 0;
+ int i;
+ char buf[4];
+
+ /* If unable to read memory, assume pc is not in a linker stub. */
+ if (target_read_memory (pc, buf, 4) != 0)
+ return 0;
+
+ /* We are looking for something like
+
+ ; $$dyncall jams RP into this special spot in the frame (RP')
+ ; before calling the "call stub"
+ ldw -18(sp),rp
+
+ ldsid (rp),r1 ; Get space associated with RP into r1
+ mtsp r1,sp ; Move it into space register 0
+ be,n 0(sr0),rp) ; back to your regularly scheduled program
+ */
+
+ /* Maximum known linker stub size is 4 instructions. Search forward
+ from the given PC, then backward. */
+ for (i = 0; i < 4; i++)
+ {
+ /* If we hit something with an unwind, stop searching this direction. */
+
+ if (find_unwind_entry (pc + i * 4) != 0)
+ break;
+
+ /* Check for ldsid (rp),r1 which is the magic instruction for a
+ return from a cross-space function call. */
+ if (read_memory_integer (pc + i * 4, 4) == 0x004010a1)
+ {
+ found_magic_instruction = 1;
+ break;
+ }
+ /* Add code to handle long call/branch and argument relocation stubs
+ here. */
+ }
+
+ if (found_magic_instruction != 0)
+ return 1;
+
+ /* Now look backward. */
+ for (i = 0; i < 4; i++)
+ {
+ /* If we hit something with an unwind, stop searching this direction. */
+
+ if (find_unwind_entry (pc - i * 4) != 0)
+ break;
+
+ /* Check for ldsid (rp),r1 which is the magic instruction for a
+ return from a cross-space function call. */
+ if (read_memory_integer (pc - i * 4, 4) == 0x004010a1)
+ {
+ found_magic_instruction = 1;
+ break;
+ }
+ /* Add code to handle long call/branch and argument relocation stubs
+ here. */
+ }
+ return found_magic_instruction;
+}
+
static int
find_return_regnum(pc)
CORE_ADDR pc;
return RP_REGNUM;
}
+/* Return size of frame, or -1 if we should use a frame pointer. */
int
-find_proc_framesize(pc)
+find_proc_framesize (pc)
CORE_ADDR pc;
{
struct unwind_table_entry *u;
-
- if (!use_unwind)
- return -1;
+ struct minimal_symbol *msym_us;
u = find_unwind_entry (pc);
if (!u)
+ {
+ if (pc_in_linker_stub (pc))
+ /* Linker stubs have a zero size frame. */
+ return 0;
+ else
+ return -1;
+ }
+
+ msym_us = lookup_minimal_symbol_by_pc (pc);
+
+ /* If Save_SP is set, and we're not in an interrupt or signal caller,
+ then we have a frame pointer. Use it. */
+ if (u->Save_SP && !pc_in_interrupt_handler (pc)
+ && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us)))
return -1;
return u->Total_frame_size << 3;
}
-int
-rp_saved(pc)
+/* Return offset from sp at which rp is saved, or 0 if not saved. */
+static int rp_saved PARAMS ((CORE_ADDR));
+
+static int
+rp_saved (pc)
+ CORE_ADDR pc;
{
struct unwind_table_entry *u;
u = find_unwind_entry (pc);
if (!u)
- return 0;
+ {
+ if (pc_in_linker_stub (pc))
+ /* This is the so-called RP'. */
+ return -24;
+ else
+ return 0;
+ }
if (u->Save_RP)
- return 1;
+ return -20;
+ else if (u->stub_type != 0)
+ {
+ switch (u->stub_type)
+ {
+ case EXPORT:
+ case IMPORT:
+ return -24;
+ case PARAMETER_RELOCATION:
+ return -8;
+ default:
+ return 0;
+ }
+ }
else
return 0;
}
\f
+int
+frameless_function_invocation (frame)
+ struct frame_info *frame;
+{
+ struct unwind_table_entry *u;
+
+ u = find_unwind_entry (frame->pc);
+
+ if (u == 0)
+ return 0;
+
+ return (u->Total_frame_size == 0 && u->stub_type == 0);
+}
+
CORE_ADDR
saved_pc_after_call (frame)
- FRAME frame;
+ struct frame_info *frame;
{
int ret_regnum;
+ CORE_ADDR pc;
+ struct unwind_table_entry *u;
ret_regnum = find_return_regnum (get_frame_pc (frame));
-
- return read_register (ret_regnum) & ~0x3;
+ pc = read_register (ret_regnum) & ~0x3;
+
+ /* If PC is in a linker stub, then we need to dig the address
+ the stub will return to out of the stack. */
+ u = find_unwind_entry (pc);
+ if (u && u->stub_type != 0)
+ return frame_saved_pc (frame);
+ else
+ return pc;
}
\f
CORE_ADDR
frame_saved_pc (frame)
- FRAME frame;
+ struct frame_info *frame;
{
CORE_ADDR pc = get_frame_pc (frame);
+ struct unwind_table_entry *u;
+
+ /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
+ at the base of the frame in an interrupt handler. Registers within
+ are saved in the exact same order as GDB numbers registers. How
+ convienent. */
+ if (pc_in_interrupt_handler (pc))
+ return read_memory_integer (frame->frame + PC_REGNUM * 4, 4) & ~0x3;
+
+#ifdef FRAME_SAVED_PC_IN_SIGTRAMP
+ /* Deal with signal handler caller frames too. */
+ if (frame->signal_handler_caller)
+ {
+ CORE_ADDR rp;
+ FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp);
+ return rp & ~0x3;
+ }
+#endif
- if (frameless_look_for_prologue (frame))
+ if (frameless_function_invocation (frame))
{
int ret_regnum;
ret_regnum = find_return_regnum (pc);
- return read_register (ret_regnum) & ~0x3;
+ /* If the next frame is an interrupt frame or a signal
+ handler caller, then we need to look in the saved
+ register area to get the return pointer (the values
+ in the registers may not correspond to anything useful). */
+ if (frame->next
+ && (frame->next->signal_handler_caller
+ || pc_in_interrupt_handler (frame->next->pc)))
+ {
+ struct frame_saved_regs saved_regs;
+
+ get_frame_saved_regs (frame->next, &saved_regs);
+ if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
+ {
+ pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
+
+ /* Syscalls are really two frames. The syscall stub itself
+ with a return pointer in %rp and the kernel call with
+ a return pointer in %r31. We return the %rp variant
+ if %r31 is the same as frame->pc. */
+ if (pc == frame->pc)
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ }
+ else
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ }
+ else
+ pc = read_register (ret_regnum) & ~0x3;
}
- else if (rp_saved (pc))
- return read_memory_integer (frame->frame - 20, 4) & ~0x3;
else
- return read_register (RP_REGNUM) & ~0x3;
+ {
+ int rp_offset;
+
+restart:
+ rp_offset = rp_saved (pc);
+ /* Similar to code in frameless function case. If the next
+ frame is a signal or interrupt handler, then dig the right
+ information out of the saved register info. */
+ if (rp_offset == 0
+ && frame->next
+ && (frame->next->signal_handler_caller
+ || pc_in_interrupt_handler (frame->next->pc)))
+ {
+ struct frame_saved_regs saved_regs;
+
+ get_frame_saved_regs (frame->next, &saved_regs);
+ if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
+ {
+ pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
+
+ /* Syscalls are really two frames. The syscall stub itself
+ with a return pointer in %rp and the kernel call with
+ a return pointer in %r31. We return the %rp variant
+ if %r31 is the same as frame->pc. */
+ if (pc == frame->pc)
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ }
+ else
+ pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+ }
+ else if (rp_offset == 0)
+ pc = read_register (RP_REGNUM) & ~0x3;
+ else
+ pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3;
+ }
+
+ /* If PC is inside a linker stub, then dig out the address the stub
+ will return to. */
+ u = find_unwind_entry (pc);
+ if (u && u->stub_type != 0)
+ {
+ unsigned int insn;
+
+ /* If this is a dynamic executable, and we're in a signal handler,
+ then the call chain will eventually point us into the stub for
+ _sigreturn. Unlike most cases, we'll be pointed to the branch
+ to the real sigreturn rather than the code after the real branch!.
+
+ Else, try to dig the address the stub will return to in the normal
+ fashion. */
+ insn = read_memory_integer (pc, 4);
+ if ((insn & 0xfc00e000) == 0xe8000000)
+ return (pc + extract_17 (insn) + 8) & ~0x3;
+ else
+ goto restart;
+ }
+
+ return pc;
}
\f
/* We need to correct the PC and the FP for the outermost frame when we are
int flags;
int framesize;
- if (frame->next) /* Only do this for outermost frame */
+ if (frame->next && !fromleaf)
return;
+ /* If the next frame represents a frameless function invocation
+ then we have to do some adjustments that are normally done by
+ FRAME_CHAIN. (FRAME_CHAIN is not called in this case.) */
+ if (fromleaf)
+ {
+ /* Find the framesize of *this* frame without peeking at the PC
+ in the current frame structure (it isn't set yet). */
+ framesize = find_proc_framesize (FRAME_SAVED_PC (get_next_frame (frame)));
+
+ /* Now adjust our base frame accordingly. If we have a frame pointer
+ use it, else subtract the size of this frame from the current
+ frame. (we always want frame->frame to point at the lowest address
+ in the frame). */
+ if (framesize == -1)
+ frame->frame = read_register (FP_REGNUM);
+ else
+ frame->frame -= framesize;
+ return;
+ }
+
flags = read_register (FLAGS_REGNUM);
if (flags & 2) /* In system call? */
frame->pc = read_register (31) & ~0x3;
- /* The outermost frame is always derived from PC-framesize */
+ /* The outermost frame is always derived from PC-framesize
+
+ One might think frameless innermost frames should have
+ a frame->frame that is the same as the parent's frame->frame.
+ That is wrong; frame->frame in that case should be the *high*
+ address of the parent's frame. It's complicated as hell to
+ explain, but the parent *always* creates some stack space for
+ the child. So the child actually does have a frame of some
+ sorts, and its base is the high address in its parent's frame. */
framesize = find_proc_framesize(frame->pc);
if (framesize == -1)
frame->frame = read_register (FP_REGNUM);
else
frame->frame = read_register (SP_REGNUM) - framesize;
-
- if (!frameless_look_for_prologue (frame)) /* Frameless? */
- return; /* No, quit now */
-
- /* For frameless functions, we need to look at the caller's frame */
- framesize = find_proc_framesize(FRAME_SAVED_PC(frame));
- if (framesize != -1)
- frame->frame -= framesize;
}
\f
-FRAME_ADDR
+/* Given a GDB frame, determine the address of the calling function's frame.
+ This will be used to create a new GDB frame struct, and then
+ INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+ This may involve searching through prologues for several functions
+ at boundaries where GCC calls HP C code, or where code which has
+ a frame pointer calls code without a frame pointer. */
+
+CORE_ADDR
frame_chain (frame)
struct frame_info *frame;
{
- int framesize;
+ int my_framesize, caller_framesize;
+ struct unwind_table_entry *u;
+ CORE_ADDR frame_base;
+ struct frame_info *tmp_frame;
+
+ /* Handle HPUX, BSD, and OSF1 style interrupt frames first. These
+ are easy; at *sp we have a full save state strucutre which we can
+ pull the old stack pointer from. Also see frame_saved_pc for
+ code to dig a saved PC out of the save state structure. */
+ if (pc_in_interrupt_handler (frame->pc))
+ frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, 4);
+#ifdef FRAME_BASE_BEFORE_SIGTRAMP
+ else if (frame->signal_handler_caller)
+ {
+ FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base);
+ }
+#endif
+ else
+ frame_base = frame->frame;
+
+ /* Get frame sizes for the current frame and the frame of the
+ caller. */
+ my_framesize = find_proc_framesize (frame->pc);
+ caller_framesize = find_proc_framesize (FRAME_SAVED_PC(frame));
+
+ /* If caller does not have a frame pointer, then its frame
+ can be found at current_frame - caller_framesize. */
+ if (caller_framesize != -1)
+ return frame_base - caller_framesize;
+
+ /* Both caller and callee have frame pointers and are GCC compiled
+ (SAVE_SP bit in unwind descriptor is on for both functions.
+ The previous frame pointer is found at the top of the current frame. */
+ if (caller_framesize == -1 && my_framesize == -1)
+ return read_memory_integer (frame_base, 4);
+
+ /* Caller has a frame pointer, but callee does not. This is a little
+ more difficult as GCC and HP C lay out locals and callee register save
+ areas very differently.
+
+ The previous frame pointer could be in a register, or in one of
+ several areas on the stack.
+
+ Walk from the current frame to the innermost frame examining
+ unwind descriptors to determine if %r3 ever gets saved into the
+ stack. If so return whatever value got saved into the stack.
+ If it was never saved in the stack, then the value in %r3 is still
+ valid, so use it.
+
+ We use information from unwind descriptors to determine if %r3
+ is saved into the stack (Entry_GR field has this information). */
+
+ tmp_frame = frame;
+ while (tmp_frame)
+ {
+ u = find_unwind_entry (tmp_frame->pc);
+
+ if (!u)
+ {
+ /* We could find this information by examining prologues. I don't
+ think anyone has actually written any tools (not even "strip")
+ which leave them out of an executable, so maybe this is a moot
+ point. */
+ warning ("Unable to find unwind for PC 0x%x -- Help!", tmp_frame->pc);
+ return 0;
+ }
+
+ /* Entry_GR specifies the number of callee-saved general registers
+ saved in the stack. It starts at %r3, so %r3 would be 1. */
+ if (u->Entry_GR >= 1 || u->Save_SP
+ || tmp_frame->signal_handler_caller
+ || pc_in_interrupt_handler (tmp_frame->pc))
+ break;
+ else
+ tmp_frame = tmp_frame->next;
+ }
+
+ if (tmp_frame)
+ {
+ /* We may have walked down the chain into a function with a frame
+ pointer. */
+ if (u->Save_SP
+ && !tmp_frame->signal_handler_caller
+ && !pc_in_interrupt_handler (tmp_frame->pc))
+ return read_memory_integer (tmp_frame->frame, 4);
+ /* %r3 was saved somewhere in the stack. Dig it out. */
+ else
+ {
+ struct frame_saved_regs saved_regs;
- framesize = find_proc_framesize(FRAME_SAVED_PC(frame));
+ /* Sick.
- if (framesize != -1)
- return frame->frame - framesize;
+ For optimization purposes many kernels don't have the
+ callee saved registers into the save_state structure upon
+ entry into the kernel for a syscall; the optimization
+ is usually turned off if the process is being traced so
+ that the debugger can get full register state for the
+ process.
+
+ This scheme works well except for two cases:
- return read_memory_integer (frame->frame, 4);
+ * Attaching to a process when the process is in the
+ kernel performing a system call (debugger can't get
+ full register state for the inferior process since
+ the process wasn't being traced when it entered the
+ system call).
+
+ * Register state is not complete if the system call
+ causes the process to core dump.
+
+
+ The following heinous code is an attempt to deal with
+ the lack of register state in a core dump. It will
+ fail miserably if the function which performs the
+ system call has a variable sized stack frame. */
+
+ get_frame_saved_regs (tmp_frame, &saved_regs);
+
+ /* Abominable hack. */
+ if (current_target.to_has_execution == 0
+ && saved_regs.regs[FLAGS_REGNUM]
+ && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2))
+ {
+ u = find_unwind_entry (FRAME_SAVED_PC (frame));
+ if (!u)
+ return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ else
+ return frame_base - (u->Total_frame_size << 3);
+ }
+
+ return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ }
+ }
+ else
+ {
+ /* The value in %r3 was never saved into the stack (thus %r3 still
+ holds the value of the previous frame pointer). */
+ return read_register (FP_REGNUM);
+ }
}
+
\f
/* To see if a frame chain is valid, see if the caller looks like it
was compiled with gcc. */
int
frame_chain_valid (chain, thisframe)
- FRAME_ADDR chain;
- FRAME thisframe;
+ CORE_ADDR chain;
+ struct frame_info *thisframe;
{
- struct minimal_symbol *msym;
+ struct minimal_symbol *msym_us;
+ struct minimal_symbol *msym_start;
+ struct unwind_table_entry *u, *next_u = NULL;
+ struct frame_info *next;
if (!chain)
return 0;
- msym = lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe));
+ u = find_unwind_entry (thisframe->pc);
+
+ if (u == NULL)
+ return 1;
- if (msym
- && (strcmp (SYMBOL_NAME (msym), "_start") == 0))
+ /* We can't just check that the same of msym_us is "_start", because
+ someone idiotically decided that they were going to make a Ltext_end
+ symbol with the same address. This Ltext_end symbol is totally
+ indistinguishable (as nearly as I can tell) from the symbol for a function
+ which is (legitimately, since it is in the user's namespace)
+ named Ltext_end, so we can't just ignore it. */
+ msym_us = lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe));
+ msym_start = lookup_minimal_symbol ("_start", NULL, NULL);
+ if (msym_us
+ && msym_start
+ && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
return 0;
- else
+
+ next = get_next_frame (thisframe);
+ if (next)
+ next_u = find_unwind_entry (next->pc);
+
+ /* If this frame does not save SP, has no stack, isn't a stub,
+ and doesn't "call" an interrupt routine or signal handler caller,
+ then its not valid. */
+ if (u->Save_SP || u->Total_frame_size || u->stub_type != 0
+ || (thisframe->next && thisframe->next->signal_handler_caller)
+ || (next_u && next_u->HP_UX_interrupt_marker))
+ return 1;
+
+ if (pc_in_linker_stub (thisframe->pc))
return 1;
+
+ return 0;
}
/*
* to be aligned to a 64-byte boundary.
*/
-int
-push_dummy_frame ()
+void
+push_dummy_frame (inf_status)
+ struct inferior_status *inf_status;
{
- register CORE_ADDR sp;
+ CORE_ADDR sp, pc, pcspace;
register int regnum;
int int_buffer;
double freg_buffer;
+ /* Oh, what a hack. If we're trying to perform an inferior call
+ while the inferior is asleep, we have to make sure to clear
+ the "in system call" bit in the flag register (the call will
+ start after the syscall returns, so we're no longer in the system
+ call!) This state is kept in "inf_status", change it there.
+
+ We also need a number of horrid hacks to deal with lossage in the
+ PC queue registers (apparently they're not valid when the in syscall
+ bit is set). */
+ pc = target_read_pc (inferior_pid);
+ int_buffer = read_register (FLAGS_REGNUM);
+ if (int_buffer & 0x2)
+ {
+ unsigned int sid;
+ int_buffer &= ~0x2;
+ memcpy (inf_status->registers, &int_buffer, 4);
+ memcpy (inf_status->registers + REGISTER_BYTE (PCOQ_HEAD_REGNUM), &pc, 4);
+ pc += 4;
+ memcpy (inf_status->registers + REGISTER_BYTE (PCOQ_TAIL_REGNUM), &pc, 4);
+ pc -= 4;
+ sid = (pc >> 30) & 0x3;
+ if (sid == 0)
+ pcspace = read_register (SR4_REGNUM);
+ else
+ pcspace = read_register (SR4_REGNUM + 4 + sid);
+ memcpy (inf_status->registers + REGISTER_BYTE (PCSQ_HEAD_REGNUM),
+ &pcspace, 4);
+ memcpy (inf_status->registers + REGISTER_BYTE (PCSQ_TAIL_REGNUM),
+ &pcspace, 4);
+ }
+ else
+ pcspace = read_register (PCSQ_HEAD_REGNUM);
+
/* Space for "arguments"; the RP goes in here. */
sp = read_register (SP_REGNUM) + 48;
int_buffer = read_register (RP_REGNUM) | 0x3;
}
sp = push_word (sp, read_register (IPSW_REGNUM));
sp = push_word (sp, read_register (SAR_REGNUM));
- sp = push_word (sp, read_register (PCOQ_HEAD_REGNUM));
- sp = push_word (sp, read_register (PCSQ_HEAD_REGNUM));
- sp = push_word (sp, read_register (PCOQ_TAIL_REGNUM));
- sp = push_word (sp, read_register (PCSQ_TAIL_REGNUM));
+ sp = push_word (sp, pc);
+ sp = push_word (sp, pcspace);
+ sp = push_word (sp, pc + 4);
+ sp = push_word (sp, pcspace);
write_register (SP_REGNUM, sp);
}
+void
find_dummy_frame_regs (frame, frame_saved_regs)
struct frame_info *frame;
struct frame_saved_regs *frame_saved_regs;
frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 20;
}
-int
+void
hppa_pop_frame ()
{
- register FRAME frame = get_current_frame ();
- register CORE_ADDR fp;
+ register struct frame_info *frame = get_current_frame ();
+ register CORE_ADDR fp, npc, target_pc;
register int regnum;
struct frame_saved_regs fsr;
- struct frame_info *fi;
double freg_buffer;
- fi = get_frame_info (frame);
- fp = fi->frame;
- get_frame_saved_regs (fi, &fsr);
+ fp = FRAME_FP (frame);
+ get_frame_saved_regs (frame, &fsr);
+#ifndef NO_PC_SPACE_QUEUE_RESTORE
if (fsr.regs[IPSW_REGNUM]) /* Restoring a call dummy frame */
restore_pc_queue (&fsr);
+#endif
for (regnum = 31; regnum > 0; regnum--)
if (fsr.regs[regnum])
write_register (SAR_REGNUM,
read_memory_integer (fsr.regs[SAR_REGNUM], 4));
+ /* If the PC was explicitly saved, then just restore it. */
if (fsr.regs[PCOQ_TAIL_REGNUM])
- write_register (PCOQ_TAIL_REGNUM,
- read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], 4));
+ {
+ npc = read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], 4);
+ write_register (PCOQ_TAIL_REGNUM, npc);
+ }
+ /* Else use the value in %rp to set the new PC. */
+ else
+ {
+ npc = read_register (RP_REGNUM);
+ target_write_pc (npc, 0);
+ }
write_register (FP_REGNUM, read_memory_integer (fp, 4));
else
write_register (SP_REGNUM, fp);
- flush_cached_frames ();
- set_current_frame (create_new_frame (read_register (FP_REGNUM),
- read_pc ()));
-}
+ /* The PC we just restored may be inside a return trampoline. If so
+ we want to restart the inferior and run it through the trampoline.
-/*
+ Do this by setting a momentary breakpoint at the location the
+ trampoline returns to.
+
+ Don't skip through the trampoline if we're popping a dummy frame. */
+ target_pc = SKIP_TRAMPOLINE_CODE (npc & ~0x3) & ~0x3;
+ if (target_pc && !fsr.regs[IPSW_REGNUM])
+ {
+ struct symtab_and_line sal;
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+
+ /* Set up our breakpoint. Set it to be silent as the MI code
+ for "return_command" will print the frame we returned to. */
+ sal = find_pc_line (target_pc, 0);
+ sal.pc = target_pc;
+ breakpoint = set_momentary_breakpoint (sal, NULL, bp_finish);
+ breakpoint->silent = 1;
+
+ /* So we can clean things up. */
+ old_chain = make_cleanup (delete_breakpoint, breakpoint);
+
+ /* Start up the inferior. */
+ proceed_to_finish = 1;
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+
+ /* Perform our cleanups. */
+ do_cleanups (old_chain);
+ }
+ flush_cached_frames ();
+}
+
+/*
* After returning to a dummy on the stack, restore the instruction
* queue space registers. */
{
CORE_ADDR pc = read_pc ();
CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM], 4);
- int pid;
- WAITTYPE w;
+ struct target_waitstatus w;
int insn_count;
/* Advance past break instruction in the call dummy. */
for (insn_count = 0; insn_count < 3; insn_count++)
{
+ /* FIXME: What if the inferior gets a signal right now? Want to
+ merge this into wait_for_inferior (as a special kind of
+ watchpoint? By setting a breakpoint at the end? Is there
+ any other choice? Is there *any* way to do this stuff with
+ ptrace() or some equivalent?). */
resume (1, 0);
- target_wait(&w);
+ target_wait (inferior_pid, &w);
- if (!WIFSTOPPED (w))
+ if (w.kind == TARGET_WAITKIND_SIGNALLED)
{
- stop_signal = WTERMSIG (w);
+ stop_signal = w.value.sig;
terminal_ours_for_output ();
- printf ("\nProgram terminated with signal %d, %s\n",
- stop_signal, safe_strsignal (stop_signal));
- fflush (stdout);
+ printf_unfiltered ("\nProgram terminated with signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+ gdb_flush (gdb_stdout);
return 0;
}
}
- fetch_inferior_registers (-1);
+ target_terminal_ours ();
+ target_fetch_registers (-1);
return 1;
}
CORE_ADDR
hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
int nargs;
- value *args;
+ value_ptr *args;
CORE_ADDR sp;
int struct_return;
CORE_ADDR struct_addr;
{
/* array of arguments' offsets */
- int *offset = (int *)alloca(nargs);
+ int *offset = (int *)alloca(nargs * sizeof (int));
int cum = 0;
int i, alignment;
for (i = 0; i < nargs; i++)
{
- /* Coerce chars to int & float to double if necessary */
- args[i] = value_arg_coerce (args[i]);
-
cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
/* value must go at proper alignment. Assume alignment is a
cum = (cum + alignment) & -alignment;
offset[i] = -cum;
}
- sp += min ((cum + 7) & -8, 16);
+ sp += max ((cum + 7) & -8, 16);
for (i = 0; i < nargs; i++)
write_memory (sp + offset[i], VALUE_CONTENTS (args[i]),
CORE_ADDR
hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
- REGISTER_TYPE *dummy;
+ char *dummy;
CORE_ADDR pc;
CORE_ADDR fun;
int nargs;
- value *args;
+ value_ptr *args;
struct type *type;
int gcc_p;
{
- CORE_ADDR dyncall_addr, sr4export_addr;
+ CORE_ADDR dyncall_addr;
struct minimal_symbol *msymbol;
+ int flags = read_register (FLAGS_REGNUM);
+ struct unwind_table_entry *u;
- msymbol = lookup_minimal_symbol ("$$dyncall", (struct objfile *) NULL);
+ msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
if (msymbol == NULL)
error ("Can't find an address for $$dyncall trampoline");
dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol);
- msymbol = lookup_minimal_symbol ("_sr4export", (struct objfile *) NULL);
- if (msymbol == NULL)
- error ("Can't find an address for _sr4export trampoline");
+ /* FUN could be a procedure label, in which case we have to get
+ its real address and the value of its GOT/DP. */
+ if (fun & 0x2)
+ {
+ /* Get the GOT/DP value for the target function. It's
+ at *(fun+4). Note the call dummy is *NOT* allowed to
+ trash %r19 before calling the target function. */
+ write_register (19, read_memory_integer ((fun & ~0x3) + 4, 4));
+
+ /* Now get the real address for the function we are calling, it's
+ at *fun. */
+ fun = (CORE_ADDR) read_memory_integer (fun & ~0x3, 4);
+ }
+ else
+ {
+
+#ifndef GDB_TARGET_IS_PA_ELF
+ /* FUN could be either an export stub, or the real address of a
+ function in a shared library. We must call an import stub
+ rather than the export stub or real function for lazy binding
+ to work correctly. */
+ if (som_solib_get_got_by_pc (fun))
+ {
+ struct objfile *objfile;
+ struct minimal_symbol *funsymbol, *stub_symbol;
+ CORE_ADDR newfun = 0;
+
+ funsymbol = lookup_minimal_symbol_by_pc (fun);
+ if (!funsymbol)
+ error ("Unable to find minimal symbol for target fucntion.\n");
+
+ /* Search all the object files for an import symbol with the
+ right name. */
+ ALL_OBJFILES (objfile)
+ {
+ stub_symbol = lookup_minimal_symbol (SYMBOL_NAME (funsymbol),
+ NULL, objfile);
+ /* Found a symbol with the right name. */
+ if (stub_symbol)
+ {
+ struct unwind_table_entry *u;
+ /* It must be a shared library trampoline. */
+ if (SYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
+ continue;
+
+ /* It must also be an import stub. */
+ u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
+ if (!u || u->stub_type != IMPORT)
+ continue;
+
+ /* OK. Looks like the correct import stub. */
+ newfun = SYMBOL_VALUE (stub_symbol);
+ fun = newfun;
+ }
+ }
+ if (newfun == 0)
+ write_register (19, som_solib_get_got_by_pc (fun));
+ }
+#endif
+ }
+
+ /* If we are calling an import stub (eg calling into a dynamic library)
+ then have sr4export call the magic __d_plt_call routine which is linked
+ in from end.o. (You can't use _sr4export to call the import stub as
+ the value in sp-24 will get fried and you end up returning to the
+ wrong location. You can't call the import stub directly as the code
+ to bind the PLT entry to a function can't return to a stack address.) */
+ u = find_unwind_entry (fun);
+ if (u && u->stub_type == IMPORT)
+ {
+ CORE_ADDR new_fun;
+ msymbol = lookup_minimal_symbol ("__d_plt_call", NULL, NULL);
+ if (msymbol == NULL)
+ msymbol = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL);
- sr4export_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+ if (msymbol == NULL)
+ error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline");
- dummy[9] = deposit_21 (fun >> 11, dummy[9]);
- dummy[10] = deposit_14 (fun & MASK_11, dummy[10]);
- dummy[12] = deposit_21 (sr4export_addr >> 11, dummy[12]);
- dummy[13] = deposit_14 (sr4export_addr & MASK_11, dummy[13]);
+ /* This is where sr4export will jump to. */
+ new_fun = SYMBOL_VALUE_ADDRESS (msymbol);
+
+ if (strcmp (SYMBOL_NAME (msymbol), "__d_plt_call"))
+ write_register (22, fun);
+ else
+ {
+ /* We have to store the address of the stub in __shlib_funcptr. */
+ msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
+ (struct objfile *)NULL);
+ if (msymbol == NULL)
+ error ("Can't find an address for __shlib_funcptr");
+
+ target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&fun, 4);
+ }
+ fun = new_fun;
+ }
+
+/* Store upper 21 bits of function address into ldil */
+
+ store_unsigned_integer
+ (&dummy[FUNC_LDIL_OFFSET],
+ INSTRUCTION_SIZE,
+ deposit_21 (fun >> 11,
+ extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET],
+ INSTRUCTION_SIZE)));
+
+/* Store lower 11 bits of function address into ldo */
+
+ store_unsigned_integer
+ (&dummy[FUNC_LDO_OFFSET],
+ INSTRUCTION_SIZE,
+ deposit_14 (fun & MASK_11,
+ extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET],
+ INSTRUCTION_SIZE)));
+#ifdef SR4EXPORT_LDIL_OFFSET
+
+ {
+ CORE_ADDR sr4export_addr;
+
+ /* We still need sr4export's address too. */
+
+ msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+ if (msymbol == NULL)
+ error ("Can't find an address for _sr4export trampoline");
+
+ sr4export_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+/* Store upper 21 bits of sr4export's address into ldil */
+
+ store_unsigned_integer
+ (&dummy[SR4EXPORT_LDIL_OFFSET],
+ INSTRUCTION_SIZE,
+ deposit_21 (sr4export_addr >> 11,
+ extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET],
+ INSTRUCTION_SIZE)));
+/* Store lower 11 bits of sr4export's address into ldo */
+
+ store_unsigned_integer
+ (&dummy[SR4EXPORT_LDO_OFFSET],
+ INSTRUCTION_SIZE,
+ deposit_14 (sr4export_addr & MASK_11,
+ extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET],
+ INSTRUCTION_SIZE)));
+ }
+#endif
write_register (22, pc);
- return dyncall_addr;
+ /* If we are in a syscall, then we should call the stack dummy
+ directly. $$dyncall is not needed as the kernel sets up the
+ space id registers properly based on the value in %r31. In
+ fact calling $$dyncall will not work because the value in %r22
+ will be clobbered on the syscall exit path.
+
+ Similarly if the current PC is in a shared library. Note however,
+ this scheme won't work if the shared library isn't mapped into
+ the same space as the stack. */
+ if (flags & 2)
+ return pc;
+#ifndef GDB_TARGET_IS_PA_ELF
+ else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid)))
+ return pc;
+#endif
+ else
+ return dyncall_addr;
+
+}
+
+/* Get the PC from %r31 if currently in a syscall. Also mask out privilege
+ bits. */
+
+CORE_ADDR
+target_read_pc (pid)
+ int pid;
+{
+ int flags = read_register (FLAGS_REGNUM);
+
+ if (flags & 2) {
+ return read_register (31) & ~0x3;
+ }
+ return read_register (PC_REGNUM) & ~0x3;
+}
+
+/* Write out the PC. If currently in a syscall, then also write the new
+ PC value into %r31. */
+
+void
+target_write_pc (v, pid)
+ CORE_ADDR v;
+ int pid;
+{
+ int flags = read_register (FLAGS_REGNUM);
+
+ /* If in a syscall, then set %r31. Also make sure to get the
+ privilege bits set correctly. */
+ if (flags & 2)
+ write_register (31, (long) (v | 0x3));
+
+ write_register (PC_REGNUM, (long) v);
+ write_register (NPC_REGNUM, (long) v + 4);
}
/* return the alignment of a type in bytes. Structures have the maximum
/* Print the register regnum, or all registers if regnum is -1 */
+void
pa_do_registers_info (regnum, fpregs)
int regnum;
int fpregs;
if (regnum == -1)
pa_print_registers (raw_regs, regnum, fpregs);
else if (regnum < FP0_REGNUM)
- printf ("%s %x\n", reg_names[regnum], *(long *)(raw_regs +
+ printf_unfiltered ("%s %x\n", reg_names[regnum], *(long *)(raw_regs +
REGISTER_BYTE (regnum)));
else
pa_print_fp_reg (regnum);
}
+static void
pa_print_registers (raw_regs, regnum, fpregs)
char *raw_regs;
int regnum;
int fpregs;
{
- int i;
+ int i,j;
+ long val;
for (i = 0; i < 18; i++)
- printf ("%8.8s: %8x %8.8s: %8x %8.8s: %8x %8.8s: %8x\n",
- reg_names[i],
- *(int *)(raw_regs + REGISTER_BYTE (i)),
- reg_names[i + 18],
- *(int *)(raw_regs + REGISTER_BYTE (i + 18)),
- reg_names[i + 36],
- *(int *)(raw_regs + REGISTER_BYTE (i + 36)),
- reg_names[i + 54],
- *(int *)(raw_regs + REGISTER_BYTE (i + 54)));
-
+ {
+ for (j = 0; j < 4; j++)
+ {
+ val =
+ extract_signed_integer (raw_regs + REGISTER_BYTE (i+(j*18)), 4);
+ printf_unfiltered ("%8.8s: %8x ", reg_names[i+(j*18)], val);
+ }
+ printf_unfiltered ("\n");
+ }
+
if (fpregs)
for (i = 72; i < NUM_REGS; i++)
pa_print_fp_reg (i);
}
+static void
pa_print_fp_reg (i)
int i;
{
unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
unsigned char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
- REGISTER_TYPE val;
- /* Get the data in raw format, then convert also to virtual format. */
+ /* Get 32bits of data. */
read_relative_register_raw_bytes (i, raw_buffer);
- REGISTER_CONVERT_TO_VIRTUAL (i, raw_buffer, virtual_buffer);
- fputs_filtered (reg_names[i], stdout);
- print_spaces_filtered (15 - strlen (reg_names[i]), stdout);
+ /* Put it in the buffer. No conversions are ever necessary. */
+ memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i));
+
+ fputs_filtered (reg_names[i], gdb_stdout);
+ print_spaces_filtered (8 - strlen (reg_names[i]), gdb_stdout);
+ fputs_filtered ("(single precision) ", gdb_stdout);
- val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, stdout, 0,
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, gdb_stdout, 0,
1, 0, Val_pretty_default);
printf_filtered ("\n");
+
+ /* If "i" is even, then this register can also be a double-precision
+ FP register. Dump it out as such. */
+ if ((i % 2) == 0)
+ {
+ /* Get the data in raw format for the 2nd half. */
+ read_relative_register_raw_bytes (i + 1, raw_buffer);
+
+ /* Copy it into the appropriate part of the virtual buffer. */
+ memcpy (virtual_buffer + REGISTER_RAW_SIZE (i), raw_buffer,
+ REGISTER_RAW_SIZE (i));
+
+ /* Dump it as a double. */
+ fputs_filtered (reg_names[i], gdb_stdout);
+ print_spaces_filtered (8 - strlen (reg_names[i]), gdb_stdout);
+ fputs_filtered ("(double precision) ", gdb_stdout);
+
+ val_print (builtin_type_double, virtual_buffer, 0, gdb_stdout, 0,
+ 1, 0, Val_pretty_default);
+ printf_filtered ("\n");
+ }
}
-/* Function calls that pass into a new compilation unit must pass through a
- small piece of code that does long format (`external' in HPPA parlance)
- jumps. We figure out where the trampoline is going to end up, and return
- the PC of the final destination. If we aren't in a trampoline, we just
- return NULL.
+/* Return one if PC is in the call path of a trampoline, else return zero.
+
+ Note we return one for *any* call trampoline (long-call, arg-reloc), not
+ just shared library trampolines (import, export). */
+
+int
+in_solib_call_trampoline (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ struct minimal_symbol *minsym;
+ struct unwind_table_entry *u;
+ static CORE_ADDR dyncall = 0;
+ static CORE_ADDR sr4export = 0;
- For computed calls, we just extract the new PC from r22. */
+/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+ new exec file */
+
+ /* First see if PC is in one of the two C-library trampolines. */
+ if (!dyncall)
+ {
+ minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
+ if (minsym)
+ dyncall = SYMBOL_VALUE_ADDRESS (minsym);
+ else
+ dyncall = -1;
+ }
+
+ if (!sr4export)
+ {
+ minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+ if (minsym)
+ sr4export = SYMBOL_VALUE_ADDRESS (minsym);
+ else
+ sr4export = -1;
+ }
+
+ if (pc == dyncall || pc == sr4export)
+ return 1;
+
+ /* Get the unwind descriptor corresponding to PC, return zero
+ if no unwind was found. */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
+
+ /* If this isn't a linker stub, then return now. */
+ if (u->stub_type == 0)
+ return 0;
+
+ /* By definition a long-branch stub is a call stub. */
+ if (u->stub_type == LONG_BRANCH)
+ return 1;
+
+ /* The call and return path execute the same instructions within
+ an IMPORT stub! So an IMPORT stub is both a call and return
+ trampoline. */
+ if (u->stub_type == IMPORT)
+ return 1;
+
+ /* Parameter relocation stubs always have a call path and may have a
+ return path. */
+ if (u->stub_type == PARAMETER_RELOCATION
+ || u->stub_type == EXPORT)
+ {
+ CORE_ADDR addr;
+
+ /* Search forward from the current PC until we hit a branch
+ or the end of the stub. */
+ for (addr = pc; addr <= u->region_end; addr += 4)
+ {
+ unsigned long insn;
+
+ insn = read_memory_integer (addr, 4);
+
+ /* Does it look like a bl? If so then it's the call path, if
+ we find a bv or be first, then we're on the return path. */
+ if ((insn & 0xfc00e000) == 0xe8000000)
+ return 1;
+ else if ((insn & 0xfc00e001) == 0xe800c000
+ || (insn & 0xfc000000) == 0xe0000000)
+ return 0;
+ }
+
+ /* Should never happen. */
+ warning ("Unable to find branch in parameter relocation stub.\n");
+ return 0;
+ }
+
+ /* Unknown stub type. For now, just return zero. */
+ return 0;
+}
+
+/* Return one if PC is in the return path of a trampoline, else return zero.
+
+ Note we return one for *any* call trampoline (long-call, arg-reloc), not
+ just shared library trampolines (import, export). */
+
+int
+in_solib_return_trampoline (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ struct unwind_table_entry *u;
+
+ /* Get the unwind descriptor corresponding to PC, return zero
+ if no unwind was found. */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
+
+ /* If this isn't a linker stub or it's just a long branch stub, then
+ return zero. */
+ if (u->stub_type == 0 || u->stub_type == LONG_BRANCH)
+ return 0;
+
+ /* The call and return path execute the same instructions within
+ an IMPORT stub! So an IMPORT stub is both a call and return
+ trampoline. */
+ if (u->stub_type == IMPORT)
+ return 1;
+
+ /* Parameter relocation stubs always have a call path and may have a
+ return path. */
+ if (u->stub_type == PARAMETER_RELOCATION
+ || u->stub_type == EXPORT)
+ {
+ CORE_ADDR addr;
+
+ /* Search forward from the current PC until we hit a branch
+ or the end of the stub. */
+ for (addr = pc; addr <= u->region_end; addr += 4)
+ {
+ unsigned long insn;
+
+ insn = read_memory_integer (addr, 4);
+
+ /* Does it look like a bl? If so then it's the call path, if
+ we find a bv or be first, then we're on the return path. */
+ if ((insn & 0xfc00e000) == 0xe8000000)
+ return 0;
+ else if ((insn & 0xfc00e001) == 0xe800c000
+ || (insn & 0xfc000000) == 0xe0000000)
+ return 1;
+ }
+
+ /* Should never happen. */
+ warning ("Unable to find branch in parameter relocation stub.\n");
+ return 0;
+ }
+
+ /* Unknown stub type. For now, just return zero. */
+ return 0;
+
+}
+
+/* Figure out if PC is in a trampoline, and if so find out where
+ the trampoline will jump to. If not in a trampoline, return zero.
+
+ Simple code examination probably is not a good idea since the code
+ sequences in trampolines can also appear in user code.
+
+ We use unwinds and information from the minimal symbol table to
+ determine when we're in a trampoline. This won't work for ELF
+ (yet) since it doesn't create stub unwind entries. Whether or
+ not ELF will create stub unwinds or normal unwinds for linker
+ stubs is still being debated.
+
+ This should handle simple calls through dyncall or sr4export,
+ long calls, argument relocation stubs, and dyncall/sr4export
+ calling an argument relocation stub. It even handles some stubs
+ used in dynamic executables. */
CORE_ADDR
skip_trampoline_code (pc, name)
CORE_ADDR pc;
char *name;
{
- long inst0, inst1;
+ long orig_pc = pc;
+ long prev_inst, curr_inst, loc;
static CORE_ADDR dyncall = 0;
+ static CORE_ADDR sr4export = 0;
struct minimal_symbol *msym;
+ struct unwind_table_entry *u;
-/* FIXME XXX - dyncall must be initialized whenever we get a new exec file */
+/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+ new exec file */
if (!dyncall)
{
- msym = lookup_minimal_symbol ("$$dyncall", NULL);
+ msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
if (msym)
dyncall = SYMBOL_VALUE_ADDRESS (msym);
else
dyncall = -1;
}
+ if (!sr4export)
+ {
+ msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+ if (msym)
+ sr4export = SYMBOL_VALUE_ADDRESS (msym);
+ else
+ sr4export = -1;
+ }
+
+ /* Addresses passed to dyncall may *NOT* be the actual address
+ of the function. So we may have to do something special. */
if (pc == dyncall)
- return (CORE_ADDR)(read_register (22) & ~0x3);
+ {
+ pc = (CORE_ADDR) read_register (22);
- inst0 = read_memory_integer (pc, 4);
- inst1 = read_memory_integer (pc+4, 4);
+ /* If bit 30 (counting from the left) is on, then pc is the address of
+ the PLT entry for this function, not the address of the function
+ itself. Bit 31 has meaning too, but only for MPE. */
+ if (pc & 0x2)
+ pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
+ }
+ else if (pc == sr4export)
+ pc = (CORE_ADDR) (read_register (22));
- if ( (inst0 & 0xffe00000) == 0x20200000 /* ldil xxx, r1 */
- && (inst1 & 0xffe0e002) == 0xe0202002) /* be,n yyy(sr4, r1) */
- pc = extract_21 (inst0) + extract_17 (inst1);
- else
- pc = (CORE_ADDR)NULL;
+ /* Get the unwind descriptor corresponding to PC, return zero
+ if no unwind was found. */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
- return pc;
+ /* If this isn't a linker stub, then return now. */
+ if (u->stub_type == 0)
+ return orig_pc == pc ? 0 : pc & ~0x3;
+
+ /* It's a stub. Search for a branch and figure out where it goes.
+ Note we have to handle multi insn branch sequences like ldil;ble.
+ Most (all?) other branches can be determined by examining the contents
+ of certain registers and the stack. */
+ loc = pc;
+ curr_inst = 0;
+ prev_inst = 0;
+ while (1)
+ {
+ /* Make sure we haven't walked outside the range of this stub. */
+ if (u != find_unwind_entry (loc))
+ {
+ warning ("Unable to find branch in linker stub");
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+
+ prev_inst = curr_inst;
+ curr_inst = read_memory_integer (loc, 4);
+
+ /* Does it look like a branch external using %r1? Then it's the
+ branch from the stub to the actual function. */
+ if ((curr_inst & 0xffe0e000) == 0xe0202000)
+ {
+ /* Yup. See if the previous instruction loaded
+ a value into %r1. If so compute and return the jump address. */
+ if ((prev_inst & 0xffe00000) == 0x20200000)
+ return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3;
+ else
+ {
+ warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+ }
+
+ /* Does it look like a be 0(sr0,%r21)? That's the branch from an
+ import stub to an export stub.
+
+ It is impossible to determine the target of the branch via
+ simple examination of instructions and/or data (consider
+ that the address in the plabel may be the address of the
+ bind-on-reference routine in the dynamic loader).
+
+ So we have try an alternative approach.
+
+ Get the name of the symbol at our current location; it should
+ be a stub symbol with the same name as the symbol in the
+ shared library.
+
+ Then lookup a minimal symbol with the same name; we should
+ get the minimal symbol for the target routine in the shared
+ library as those take precedence of import/export stubs. */
+ if (curr_inst == 0xe2a00000)
+ {
+ struct minimal_symbol *stubsym, *libsym;
+
+ stubsym = lookup_minimal_symbol_by_pc (loc);
+ if (stubsym == NULL)
+ {
+ warning ("Unable to find symbol for 0x%x", loc);
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+
+ libsym = lookup_minimal_symbol (SYMBOL_NAME (stubsym), NULL, NULL);
+ if (libsym == NULL)
+ {
+ warning ("Unable to find library symbol for %s\n",
+ SYMBOL_NAME (stubsym));
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+
+ return SYMBOL_VALUE (libsym);
+ }
+
+ /* Does it look like bl X,%rp or bl X,%r0? Another way to do a
+ branch from the stub to the actual function. */
+ else if ((curr_inst & 0xffe0e000) == 0xe8400000
+ || (curr_inst & 0xffe0e000) == 0xe8000000)
+ return (loc + extract_17 (curr_inst) + 8) & ~0x3;
+
+ /* Does it look like bv (rp)? Note this depends on the
+ current stack pointer being the same as the stack
+ pointer in the stub itself! This is a branch on from the
+ stub back to the original caller. */
+ else if ((curr_inst & 0xffe0e000) == 0xe840c000)
+ {
+ /* Yup. See if the previous instruction loaded
+ rp from sp - 8. */
+ if (prev_inst == 0x4bc23ff1)
+ return (read_memory_integer
+ (read_register (SP_REGNUM) - 8, 4)) & ~0x3;
+ else
+ {
+ warning ("Unable to find restore of %%rp before bv (%%rp).");
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+ }
+
+ /* What about be,n 0(sr0,%rp)? It's just another way we return to
+ the original caller from the stub. Used in dynamic executables. */
+ else if (curr_inst == 0xe0400002)
+ {
+ /* The value we jump to is sitting in sp - 24. But that's
+ loaded several instructions before the be instruction.
+ I guess we could check for the previous instruction being
+ mtsp %r1,%sr0 if we want to do sanity checking. */
+ return (read_memory_integer
+ (read_register (SP_REGNUM) - 24, 4)) & ~0x3;
+ }
+
+ /* Haven't found the branch yet, but we're still in the stub.
+ Keep looking. */
+ loc += 4;
+ }
+}
+
+/* For the given instruction (INST), return any adjustment it makes
+ to the stack pointer or zero for no adjustment.
+
+ This only handles instructions commonly found in prologues. */
+
+static int
+prologue_inst_adjust_sp (inst)
+ unsigned long inst;
+{
+ /* This must persist across calls. */
+ static int save_high21;
+
+ /* The most common way to perform a stack adjustment ldo X(sp),sp */
+ if ((inst & 0xffffc000) == 0x37de0000)
+ return extract_14 (inst);
+
+ /* stwm X,D(sp) */
+ if ((inst & 0xffe00000) == 0x6fc00000)
+ return extract_14 (inst);
+
+ /* addil high21,%r1; ldo low11,(%r1),%r30)
+ save high bits in save_high21 for later use. */
+ if ((inst & 0xffe00000) == 0x28200000)
+ {
+ save_high21 = extract_21 (inst);
+ return 0;
+ }
+
+ if ((inst & 0xffff0000) == 0x343e0000)
+ return save_high21 + extract_14 (inst);
+
+ /* fstws as used by the HP compilers. */
+ if ((inst & 0xffffffe0) == 0x2fd01220)
+ return extract_5_load (inst);
+
+ /* No adjustment. */
+ return 0;
+}
+
+/* Return nonzero if INST is a branch of some kind, else return zero. */
+
+static int
+is_branch (inst)
+ unsigned long inst;
+{
+ switch (inst >> 26)
+ {
+ case 0x20:
+ case 0x21:
+ case 0x22:
+ case 0x23:
+ case 0x28:
+ case 0x29:
+ case 0x2a:
+ case 0x2b:
+ case 0x30:
+ case 0x31:
+ case 0x32:
+ case 0x33:
+ case 0x38:
+ case 0x39:
+ case 0x3a:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+/* Return the register number for a GR which is saved by INST or
+ zero it INST does not save a GR. */
+
+static int
+inst_saves_gr (inst)
+ unsigned long inst;
+{
+ /* Does it look like a stw? */
+ if ((inst >> 26) == 0x1a)
+ return extract_5R_store (inst);
+
+ /* Does it look like a stwm? GCC & HPC may use this in prologues. */
+ if ((inst >> 26) == 0x1b)
+ return extract_5R_store (inst);
+
+ /* Does it look like sth or stb? HPC versions 9.0 and later use these
+ too. */
+ if ((inst >> 26) == 0x19 || (inst >> 26) == 0x18)
+ return extract_5R_store (inst);
+
+ return 0;
+}
+
+/* Return the register number for a FR which is saved by INST or
+ zero it INST does not save a FR.
+
+ Note we only care about full 64bit register stores (that's the only
+ kind of stores the prologue will use).
+
+ FIXME: What about argument stores with the HP compiler in ANSI mode? */
+
+static int
+inst_saves_fr (inst)
+ unsigned long inst;
+{
+ if ((inst & 0xfc00dfc0) == 0x2c001200)
+ return extract_5r_store (inst);
+ return 0;
}
/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
+ to reach some "real" code.
-/* skip (stw rp, -20(0,sp)); copy 4,1; copy sp, 4; stwm 1,framesize(sp)
- for gcc, or (stw rp, -20(0,sp); stwm 1, framesize(sp) for hcc */
+ Use information in the unwind table to determine what exactly should
+ be in the prologue. */
CORE_ADDR
-skip_prologue(pc)
+skip_prologue (pc)
CORE_ADDR pc;
{
- int inst;
- int status;
+ char buf[4];
+ unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
+ unsigned long args_stored, status, i;
+ struct unwind_table_entry *u;
+
+ u = find_unwind_entry (pc);
+ if (!u)
+ return pc;
- status = target_read_memory (pc, (char *)&inst, 4);
- SWAP_TARGET_AND_HOST (&inst, sizeof (inst));
- if (status != 0)
+ /* If we are not at the beginning of a function, then return now. */
+ if ((pc & ~0x3) != u->region_start)
return pc;
- if (inst == 0x6BC23FD9) /* stw rp,-20(sp) */
+ /* This is how much of a frame adjustment we need to account for. */
+ stack_remaining = u->Total_frame_size << 3;
+
+ /* Magic register saves we want to know about. */
+ save_rp = u->Save_RP;
+ save_sp = u->Save_SP;
+
+ /* An indication that args may be stored into the stack. Unfortunately
+ the HPUX compilers tend to set this in cases where no args were
+ stored too!. */
+ args_stored = u->Args_stored;
+
+ /* Turn the Entry_GR field into a bitmask. */
+ save_gr = 0;
+ for (i = 3; i < u->Entry_GR + 3; i++)
{
- if (read_memory_integer (pc + 4, 4) == 0x8040241) /* copy r4,r1 */
- pc += 16;
- else if ((read_memory_integer (pc + 4, 4) & ~MASK_14) == 0x68810000) /* stw r1,(r4) */
- pc += 8;
+ /* Frame pointer gets saved into a special location. */
+ if (u->Save_SP && i == FP_REGNUM)
+ continue;
+
+ save_gr |= (1 << i);
+ }
+
+ /* Turn the Entry_FR field into a bitmask too. */
+ save_fr = 0;
+ for (i = 12; i < u->Entry_FR + 12; i++)
+ save_fr |= (1 << i);
+
+ /* Loop until we find everything of interest or hit a branch.
+
+ For unoptimized GCC code and for any HP CC code this will never ever
+ examine any user instructions.
+
+ For optimzied GCC code we're faced with problems. GCC will schedule
+ its prologue and make prologue instructions available for delay slot
+ filling. The end result is user code gets mixed in with the prologue
+ and a prologue instruction may be in the delay slot of the first branch
+ or call.
+
+ Some unexpected things are expected with debugging optimized code, so
+ we allow this routine to walk past user instructions in optimized
+ GCC code. */
+ while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0
+ || args_stored)
+ {
+ unsigned int reg_num;
+ unsigned long old_stack_remaining, old_save_gr, old_save_fr;
+ unsigned long old_save_rp, old_save_sp, next_inst;
+
+ /* Save copies of all the triggers so we can compare them later
+ (only for HPC). */
+ old_save_gr = save_gr;
+ old_save_fr = save_fr;
+ old_save_rp = save_rp;
+ old_save_sp = save_sp;
+ old_stack_remaining = stack_remaining;
+
+ status = target_read_memory (pc, buf, 4);
+ inst = extract_unsigned_integer (buf, 4);
+
+ /* Yow! */
+ if (status != 0)
+ return pc;
+
+ /* Note the interesting effects of this instruction. */
+ stack_remaining -= prologue_inst_adjust_sp (inst);
+
+ /* There is only one instruction used for saving RP into the stack. */
+ if (inst == 0x6bc23fd9)
+ save_rp = 0;
+
+ /* This is the only way we save SP into the stack. At this time
+ the HP compilers never bother to save SP into the stack. */
+ if ((inst & 0xffffc000) == 0x6fc10000)
+ save_sp = 0;
+
+ /* Account for general and floating-point register saves. */
+ reg_num = inst_saves_gr (inst);
+ save_gr &= ~(1 << reg_num);
+
+ /* Ugh. Also account for argument stores into the stack.
+ Unfortunately args_stored only tells us that some arguments
+ where stored into the stack. Not how many or what kind!
+
+ This is a kludge as on the HP compiler sets this bit and it
+ never does prologue scheduling. So once we see one, skip past
+ all of them. We have similar code for the fp arg stores below.
+
+ FIXME. Can still die if we have a mix of GR and FR argument
+ stores! */
+ if (reg_num >= 23 && reg_num <= 26)
+ {
+ while (reg_num >= 23 && reg_num <= 26)
+ {
+ pc += 4;
+ status = target_read_memory (pc, buf, 4);
+ inst = extract_unsigned_integer (buf, 4);
+ if (status != 0)
+ return pc;
+ reg_num = inst_saves_gr (inst);
+ }
+ args_stored = 0;
+ continue;
+ }
+
+ reg_num = inst_saves_fr (inst);
+ save_fr &= ~(1 << reg_num);
+
+ status = target_read_memory (pc + 4, buf, 4);
+ next_inst = extract_unsigned_integer (buf, 4);
+
+ /* Yow! */
+ if (status != 0)
+ return pc;
+
+ /* We've got to be read to handle the ldo before the fp register
+ save. */
+ if ((inst & 0xfc000000) == 0x34000000
+ && inst_saves_fr (next_inst) >= 4
+ && inst_saves_fr (next_inst) <= 7)
+ {
+ /* So we drop into the code below in a reasonable state. */
+ reg_num = inst_saves_fr (next_inst);
+ pc -= 4;
+ }
+
+ /* Ugh. Also account for argument stores into the stack.
+ This is a kludge as on the HP compiler sets this bit and it
+ never does prologue scheduling. So once we see one, skip past
+ all of them. */
+ if (reg_num >= 4 && reg_num <= 7)
+ {
+ while (reg_num >= 4 && reg_num <= 7)
+ {
+ pc += 8;
+ status = target_read_memory (pc, buf, 4);
+ inst = extract_unsigned_integer (buf, 4);
+ if (status != 0)
+ return pc;
+ if ((inst & 0xfc000000) != 0x34000000)
+ break;
+ status = target_read_memory (pc + 4, buf, 4);
+ next_inst = extract_unsigned_integer (buf, 4);
+ if (status != 0)
+ return pc;
+ reg_num = inst_saves_fr (next_inst);
+ }
+ args_stored = 0;
+ continue;
+ }
+
+ /* Quit if we hit any kind of branch. This can happen if a prologue
+ instruction is in the delay slot of the first call/branch. */
+ if (is_branch (inst))
+ break;
+
+ /* What a crock. The HP compilers set args_stored even if no
+ arguments were stored into the stack (boo hiss). This could
+ cause this code to then skip a bunch of user insns (up to the
+ first branch).
+
+ To combat this we try to identify when args_stored was bogusly
+ set and clear it. We only do this when args_stored is nonzero,
+ all other resources are accounted for, and nothing changed on
+ this pass. */
+ if (args_stored
+ && ! (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
+ && old_save_gr == save_gr && old_save_fr == save_fr
+ && old_save_rp == save_rp && old_save_sp == save_sp
+ && old_stack_remaining == stack_remaining)
+ break;
+
+ /* Bump the PC. */
+ pc += 4;
}
- else if (read_memory_integer (pc, 4) == 0x8040241) /* copy r4,r1 */
- pc += 12;
- else if ((read_memory_integer (pc, 4) & ~MASK_14) == 0x68810000) /* stw r1,(r4) */
- pc += 4;
return pc;
}
+/* Put here the code to store, into a struct frame_saved_regs,
+ the addresses of the saved registers of frame described by FRAME_INFO.
+ This includes special registers such as pc and fp saved in special
+ ways in the stack frame. sp is even more special:
+ the address we return for it IS the sp for the next frame. */
+
+void
+hppa_frame_find_saved_regs (frame_info, frame_saved_regs)
+ struct frame_info *frame_info;
+ struct frame_saved_regs *frame_saved_regs;
+{
+ CORE_ADDR pc;
+ struct unwind_table_entry *u;
+ unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
+ int status, i, reg;
+ char buf[4];
+ int fp_loc = -1;
+
+ /* Zero out everything. */
+ memset (frame_saved_regs, '\0', sizeof (struct frame_saved_regs));
+
+ /* Call dummy frames always look the same, so there's no need to
+ examine the dummy code to determine locations of saved registers;
+ instead, let find_dummy_frame_regs fill in the correct offsets
+ for the saved registers. */
+ if ((frame_info->pc >= frame_info->frame
+ && frame_info->pc <= (frame_info->frame + CALL_DUMMY_LENGTH
+ + 32 * 4 + (NUM_REGS - FP0_REGNUM) * 8
+ + 6 * 4)))
+ find_dummy_frame_regs (frame_info, frame_saved_regs);
+
+ /* Interrupt handlers are special too. They lay out the register
+ state in the exact same order as the register numbers in GDB. */
+ if (pc_in_interrupt_handler (frame_info->pc))
+ {
+ for (i = 0; i < NUM_REGS; i++)
+ {
+ /* SP is a little special. */
+ if (i == SP_REGNUM)
+ frame_saved_regs->regs[SP_REGNUM]
+ = read_memory_integer (frame_info->frame + SP_REGNUM * 4, 4);
+ else
+ frame_saved_regs->regs[i] = frame_info->frame + i * 4;
+ }
+ return;
+ }
+
+#ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP
+ /* Handle signal handler callers. */
+ if (frame_info->signal_handler_caller)
+ {
+ FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs);
+ return;
+ }
+#endif
+
+ /* Get the starting address of the function referred to by the PC
+ saved in frame. */
+ pc = get_pc_function_start (frame_info->pc);
+
+ /* Yow! */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return;
+
+ /* This is how much of a frame adjustment we need to account for. */
+ stack_remaining = u->Total_frame_size << 3;
+
+ /* Magic register saves we want to know about. */
+ save_rp = u->Save_RP;
+ save_sp = u->Save_SP;
+
+ /* Turn the Entry_GR field into a bitmask. */
+ save_gr = 0;
+ for (i = 3; i < u->Entry_GR + 3; i++)
+ {
+ /* Frame pointer gets saved into a special location. */
+ if (u->Save_SP && i == FP_REGNUM)
+ continue;
+
+ save_gr |= (1 << i);
+ }
+
+ /* Turn the Entry_FR field into a bitmask too. */
+ save_fr = 0;
+ for (i = 12; i < u->Entry_FR + 12; i++)
+ save_fr |= (1 << i);
+
+ /* The frame always represents the value of %sp at entry to the
+ current function (and is thus equivalent to the "saved" stack
+ pointer. */
+ frame_saved_regs->regs[SP_REGNUM] = frame_info->frame;
+
+ /* Loop until we find everything of interest or hit a branch.
+
+ For unoptimized GCC code and for any HP CC code this will never ever
+ examine any user instructions.
+
+ For optimzied GCC code we're faced with problems. GCC will schedule
+ its prologue and make prologue instructions available for delay slot
+ filling. The end result is user code gets mixed in with the prologue
+ and a prologue instruction may be in the delay slot of the first branch
+ or call.
+
+ Some unexpected things are expected with debugging optimized code, so
+ we allow this routine to walk past user instructions in optimized
+ GCC code. */
+ while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
+ {
+ status = target_read_memory (pc, buf, 4);
+ inst = extract_unsigned_integer (buf, 4);
+
+ /* Yow! */
+ if (status != 0)
+ return;
+
+ /* Note the interesting effects of this instruction. */
+ stack_remaining -= prologue_inst_adjust_sp (inst);
+
+ /* There is only one instruction used for saving RP into the stack. */
+ if (inst == 0x6bc23fd9)
+ {
+ save_rp = 0;
+ frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20;
+ }
+
+ /* Just note that we found the save of SP into the stack. The
+ value for frame_saved_regs was computed above. */
+ if ((inst & 0xffffc000) == 0x6fc10000)
+ save_sp = 0;
+
+ /* Account for general and floating-point register saves. */
+ reg = inst_saves_gr (inst);
+ if (reg >= 3 && reg <= 18
+ && (!u->Save_SP || reg != FP_REGNUM))
+ {
+ save_gr &= ~(1 << reg);
+
+ /* stwm with a positive displacement is a *post modify*. */
+ if ((inst >> 26) == 0x1b
+ && extract_14 (inst) >= 0)
+ frame_saved_regs->regs[reg] = frame_info->frame;
+ else
+ {
+ /* Handle code with and without frame pointers. */
+ if (u->Save_SP)
+ frame_saved_regs->regs[reg]
+ = frame_info->frame + extract_14 (inst);
+ else
+ frame_saved_regs->regs[reg]
+ = frame_info->frame + (u->Total_frame_size << 3)
+ + extract_14 (inst);
+ }
+ }
+
+
+ /* GCC handles callee saved FP regs a little differently.
+
+ It emits an instruction to put the value of the start of
+ the FP store area into %r1. It then uses fstds,ma with
+ a basereg of %r1 for the stores.
+
+ HP CC emits them at the current stack pointer modifying
+ the stack pointer as it stores each register. */
+
+ /* ldo X(%r3),%r1 or ldo X(%r30),%r1. */
+ if ((inst & 0xffffc000) == 0x34610000
+ || (inst & 0xffffc000) == 0x37c10000)
+ fp_loc = extract_14 (inst);
+
+ reg = inst_saves_fr (inst);
+ if (reg >= 12 && reg <= 21)
+ {
+ /* Note +4 braindamage below is necessary because the FP status
+ registers are internally 8 registers rather than the expected
+ 4 registers. */
+ save_fr &= ~(1 << reg);
+ if (fp_loc == -1)
+ {
+ /* 1st HP CC FP register store. After this instruction
+ we've set enough state that the GCC and HPCC code are
+ both handled in the same manner. */
+ frame_saved_regs->regs[reg + FP4_REGNUM + 4] = frame_info->frame;
+ fp_loc = 8;
+ }
+ else
+ {
+ frame_saved_regs->regs[reg + FP0_REGNUM + 4]
+ = frame_info->frame + fp_loc;
+ fp_loc += 8;
+ }
+ }
+
+ /* Quit if we hit any kind of branch. This can happen if a prologue
+ instruction is in the delay slot of the first call/branch. */
+ if (is_branch (inst))
+ break;
+
+ /* Bump the PC. */
+ pc += 4;
+ }
+}
+
+#ifdef MAINTENANCE_CMDS
+
static void
unwind_command (exp, from_tty)
char *exp;
int from_tty;
{
CORE_ADDR address;
- union
- {
- int *foo;
- struct unwind_table_entry *u;
- } xxx;
+ struct unwind_table_entry *u;
/* If we have an expression, evaluate it and use it as the address. */
else
return;
- xxx.u = find_unwind_entry (address);
+ u = find_unwind_entry (address);
- if (!xxx.u)
+ if (!u)
{
- printf ("Can't find unwind table entry for PC 0x%x\n", address);
+ printf_unfiltered ("Can't find unwind table entry for %s\n", exp);
return;
}
- printf ("%08x\n%08X\n%08X\n%08X\n", xxx.foo[0], xxx.foo[1], xxx.foo[2],
- xxx.foo[3]);
+ printf_unfiltered ("unwind_table_entry (0x%x):\n", u);
+
+ printf_unfiltered ("\tregion_start = ");
+ print_address (u->region_start, gdb_stdout);
+
+ printf_unfiltered ("\n\tregion_end = ");
+ print_address (u->region_end, gdb_stdout);
+
+#ifdef __STDC__
+#define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD);
+#else
+#define pif(FLD) if (u->FLD) printf_unfiltered (" FLD");
+#endif
+
+ printf_unfiltered ("\n\tflags =");
+ pif (Cannot_unwind);
+ pif (Millicode);
+ pif (Millicode_save_sr0);
+ pif (Entry_SR);
+ pif (Args_stored);
+ pif (Variable_Frame);
+ pif (Separate_Package_Body);
+ pif (Frame_Extension_Millicode);
+ pif (Stack_Overflow_Check);
+ pif (Two_Instruction_SP_Increment);
+ pif (Ada_Region);
+ pif (Save_SP);
+ pif (Save_RP);
+ pif (Save_MRP_in_frame);
+ pif (extn_ptr_defined);
+ pif (Cleanup_defined);
+ pif (MPE_XL_interrupt_marker);
+ pif (HP_UX_interrupt_marker);
+ pif (Large_frame);
+
+ putchar_unfiltered ('\n');
+
+#ifdef __STDC__
+#define pin(FLD) printf_unfiltered ("\t"#FLD" = 0x%x\n", u->FLD);
+#else
+#define pin(FLD) printf_unfiltered ("\tFLD = 0x%x\n", u->FLD);
+#endif
+
+ pin (Region_description);
+ pin (Entry_FR);
+ pin (Entry_GR);
+ pin (Total_frame_size);
}
+#endif /* MAINTENANCE_CMDS */
void
-_initialize_hppah_tdep ()
-{
- add_com ("unwind", class_obscure, unwind_command, "Print unwind info\n");
- add_show_from_set
- (add_set_cmd ("use_unwind", class_obscure, var_boolean,
- (char *)&use_unwind,
- "Set the usage of unwind info", &setlist),
- &showlist);
+_initialize_hppa_tdep ()
+{
+ tm_print_insn = print_insn_hppa;
+
+#ifdef MAINTENANCE_CMDS
+ add_cmd ("unwind", class_maintenance, unwind_command,
+ "Print unwind table entry at given address.",
+ &maintenanceprintlist);
+#endif /* MAINTENANCE_CMDS */
}