#include "defs.h"
#include "frame.h"
+#include "bfd.h"
#include "inferior.h"
#include "value.h"
#include <sys/types.h>
#endif
+#include <dl.h>
#include <sys/param.h>
#include <signal.h>
+#include <sys/ptrace.h>
+#include <machine/save_state.h>
+
#ifdef COFF_ENCAPSULATE
#include "a.out.encap.h"
#else
#endif
-#ifndef N_SET_MAGIC
-#define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
-#endif
/*#include <sys/user.h> After a.out.h */
#include <sys/file.h>
#include "symfile.h"
#include "objfiles.h"
+/* To support asking "What CPU is this?" */
+#include <unistd.h>
+
+/* To support detection of the pseudo-initial frame
+ that threads have. */
+#define THREAD_INITIAL_FRAME_SYMBOL "__pthread_exit"
+#define THREAD_INITIAL_FRAME_SYM_LEN sizeof(THREAD_INITIAL_FRAME_SYMBOL)
+
+static int extract_5_load PARAMS ((unsigned int));
+
+static unsigned extract_5R_store PARAMS ((unsigned int));
+
+static unsigned extract_5r_store PARAMS ((unsigned int));
+
+static void find_dummy_frame_regs PARAMS ((struct frame_info *,
+ struct frame_saved_regs *));
+
+static int find_proc_framesize PARAMS ((CORE_ADDR));
+
+static int find_return_regnum PARAMS ((CORE_ADDR));
+
+struct unwind_table_entry *find_unwind_entry PARAMS ((CORE_ADDR));
+
+static int extract_17 PARAMS ((unsigned int));
+
+static unsigned deposit_21 PARAMS ((unsigned int, unsigned int));
+
+static int extract_21 PARAMS ((unsigned));
+
+static unsigned deposit_14 PARAMS ((int, unsigned int));
+
+static int extract_14 PARAMS ((unsigned));
+
+static void unwind_command PARAMS ((char *, int));
+
+static int low_sign_extend PARAMS ((unsigned int, unsigned int));
+
+static int sign_extend PARAMS ((unsigned int, unsigned int));
+
static int restore_pc_queue PARAMS ((struct frame_saved_regs *));
static int hppa_alignof PARAMS ((struct type *));
-CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *));
+/* To support multi-threading and stepping. */
+int hppa_prepare_to_proceed PARAMS (());
static int prologue_inst_adjust_sp PARAMS ((unsigned long));
static int pc_in_linker_stub PARAMS ((CORE_ADDR));
-static int compare_unwind_entries PARAMS ((const struct unwind_table_entry *,
- const struct unwind_table_entry *));
+static int compare_unwind_entries PARAMS ((const void *, const void *));
static void read_unwind_info PARAMS ((struct objfile *));
asection *, unsigned int,
unsigned int, CORE_ADDR));
static void pa_print_registers PARAMS ((char *, int, int));
+static void pa_strcat_registers PARAMS ((char *, int, int, GDB_FILE *));
+static void pa_register_look_aside PARAMS ((char *, int, long *));
static void pa_print_fp_reg PARAMS ((int));
+static void pa_strcat_fp_reg PARAMS ((int, GDB_FILE *, enum precision_type));
+
+typedef struct {
+ struct minimal_symbol * msym;
+ CORE_ADDR solib_handle;
+} args_for_find_stub;
+
+static CORE_ADDR cover_find_stub_with_shl_get PARAMS ((args_for_find_stub *));
+
+static int is_pa_2 = 0; /* False */
+
+/* This is declared in symtab.c; set to 1 in hp-symtab-read.c */
+extern int hp_som_som_object_present;
+
+/* In breakpoint.c */
+extern int exception_catchpoints_are_fragile;
+
+/* This is defined in valops.c. */
+extern value_ptr
+find_function_in_inferior PARAMS((char *));
+
+/* Should call_function allocate stack space for a struct return? */
+int
+hppa_use_struct_convention (gcc_p, type)
+ int gcc_p;
+ struct type *type;
+{
+ return (TYPE_LENGTH (type) > 8);
+}
\f
/* Routines to extract various sized constants out of hppa
/* This assumes that no garbage lies outside of the lower bits of
value. */
-int
+static int
sign_extend (val, bits)
unsigned val, bits;
{
- return (int)(val >> bits - 1 ? (-1 << bits) | val : val);
+ return (int)(val >> (bits - 1) ? (-1 << bits) | val : val);
}
/* For many immediate values the sign bit is the low bit! */
-int
+static int
low_sign_extend (val, bits)
unsigned val, bits;
{
return (int)((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
}
+
/* extract the immediate field from a ld{bhw}s instruction */
+#if 0
+
unsigned
get_field (val, from, to)
unsigned val, from, to;
/* extract a 3-bit space register number from a be, ble, mtsp or mfsp */
+int
extract_3 (word)
unsigned word;
{
return GET_FIELD (word, 18, 18) << 2 | GET_FIELD (word, 16, 17);
}
-
+
+#endif
+
+static int
extract_5_load (word)
unsigned word;
{
return low_sign_extend (word >> 16 & MASK_5, 5);
}
+#if 0
+
/* extract the immediate field from a st{bhw}s instruction */
int
return low_sign_extend (word & MASK_5, 5);
}
+#endif /* 0 */
+
/* extract the immediate field from a break instruction */
-unsigned
+static unsigned
extract_5r_store (word)
unsigned word;
{
/* extract the immediate field from a {sr}sm instruction */
-unsigned
+static unsigned
extract_5R_store (word)
unsigned word;
{
/* extract an 11 bit immediate field */
+#if 0
+
int
extract_11 (word)
unsigned word;
return low_sign_extend (word & MASK_11, 11);
}
+#endif
+
/* extract a 14 bit immediate field */
-int
+static int
extract_14 (word)
unsigned word;
{
/* deposit a 14 bit constant in a word */
-unsigned
+static unsigned
deposit_14 (opnd, word)
int opnd;
unsigned word;
/* extract a 21 bit constant */
-int
+static int
extract_21 (word)
unsigned word;
{
usually the top 21 bits of a 32 bit constant, we assume that only
the low 21 bits of opnd are relevant */
-unsigned
+static unsigned
deposit_21 (opnd, word)
unsigned opnd, word;
{
/* extract a 12 bit constant from branch instructions */
+#if 0
+
int
extract_12 (word)
unsigned word;
return word;
}
+#endif
+
/* extract a 17 bit constant from branch instructions, returning the
19 bit signed value. */
-int
+static int
extract_17 (word)
unsigned word;
{
larger than the first, and zero if they are equal. */
static int
-compare_unwind_entries (a, b)
- const struct unwind_table_entry *a;
- const struct unwind_table_entry *b;
+compare_unwind_entries (arg1, arg2)
+ const void *arg1;
+ const void *arg2;
{
+ const struct unwind_table_entry *a = arg1;
+ const struct unwind_table_entry *b = arg2;
+
if (a->region_start > b->region_start)
return 1;
else if (a->region_start < b->region_start)
for (i = 0; i < entries; i++)
{
table[i].region_start = bfd_get_32 (objfile->obfd,
- (bfd_byte *)buf);
+ (bfd_byte *)buf);
table[i].region_start += text_offset;
buf += 4;
table[i].region_end = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
table[i].Args_stored = (tmp >> 15) & 0x1;
table[i].Variable_Frame = (tmp >> 14) & 0x1;
table[i].Separate_Package_Body = (tmp >> 13) & 0x1;
- table[i].Frame_Extension_Millicode = (tmp >> 12 ) & 0x1;
+ table[i].Frame_Extension_Millicode = (tmp >> 12) & 0x1;
table[i].Stack_Overflow_Check = (tmp >> 11) & 0x1;
table[i].Two_Instruction_SP_Increment = (tmp >> 10) & 0x1;
table[i].Ada_Region = (tmp >> 9) & 0x1;
- table[i].reserved2 = (tmp >> 5) & 0xf;
+ table[i].cxx_info = (tmp >> 8) & 0x1;
+ table[i].cxx_try_catch = (tmp >> 7) & 0x1;
+ table[i].sched_entry_seq = (tmp >> 6) & 0x1;
+ table[i].reserved2 = (tmp >> 5) & 0x1;
table[i].Save_SP = (tmp >> 4) & 0x1;
table[i].Save_RP = (tmp >> 3) & 0x1;
table[i].Save_MRP_in_frame = (tmp >> 2) & 0x1;
table[i].MPE_XL_interrupt_marker = (tmp >> 31) & 0x1;
table[i].HP_UX_interrupt_marker = (tmp >> 30) & 0x1;
table[i].Large_frame = (tmp >> 29) & 0x1;
- table[i].reserved4 = (tmp >> 27) & 0x3;
+ table[i].Pseudo_SP_Set = (tmp >> 28) & 0x1;
+ table[i].reserved4 = (tmp >> 27) & 0x1;
table[i].Total_frame_size = tmp & 0x7ffffff;
+
+ /* Stub unwinds are handled elsewhere. */
+ table[i].stub_unwind.stub_type = 0;
+ table[i].stub_unwind.padding = 0;
}
}
}
unsigned stub_entries, total_entries;
CORE_ADDR text_offset;
struct obj_unwind_info *ui;
+ obj_private_data_t *obj_private;
text_offset = ANOFFSET (objfile->section_offsets, 0);
ui = (struct obj_unwind_info *)obstack_alloc (&objfile->psymbol_obstack,
if (elf_unwind_sec)
{
- elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec);
- elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE;
+ elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec); /* purecov: deadcode */
+ elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE; /* purecov: deadcode */
}
else
{
total_size = total_entries * sizeof (struct unwind_table_entry);
/* Allocate memory for the unwind table. */
- ui->table = obstack_alloc (&objfile->psymbol_obstack, total_size);
- ui->last = total_entries - 1;
+ ui->table = (struct unwind_table_entry *)
+ obstack_alloc (&objfile->psymbol_obstack, total_size);
+ ui->last = total_entries - 1;
/* Internalize the standard unwind entries. */
index = 0;
(bfd_byte *) buf);
ui->table[index].region_start += text_offset;
buf += 4;
- ui->table[index].stub_type = bfd_get_8 (objfile->obfd,
- (bfd_byte *) buf);
+ ui->table[index].stub_unwind.stub_type = bfd_get_8 (objfile->obfd,
+ (bfd_byte *) buf);
buf += 2;
ui->table[index].region_end
= ui->table[index].region_start + 4 *
compare_unwind_entries);
/* Keep a pointer to the unwind information. */
- objfile->obj_private = (PTR) ui;
+ if(objfile->obj_private == NULL)
+ {
+ obj_private = (obj_private_data_t *)
+ obstack_alloc(&objfile->psymbol_obstack,
+ sizeof(obj_private_data_t));
+ obj_private->unwind_info = NULL;
+ obj_private->so_info = NULL;
+
+ objfile->obj_private = (PTR) obj_private;
+ }
+ obj_private = (obj_private_data_t *)objfile->obj_private;
+ obj_private->unwind_info = ui;
}
/* Lookup the unwind (stack backtrace) info for the given PC. We search all
int first, middle, last;
struct objfile *objfile;
+ /* A function at address 0? Not in HP-UX! */
+ if (pc == (CORE_ADDR) 0)
+ return NULL;
+
ALL_OBJFILES (objfile)
{
struct obj_unwind_info *ui;
-
- ui = OBJ_UNWIND_INFO (objfile);
+ ui = NULL;
+ if (objfile->obj_private)
+ ui = ((obj_private_data_t *)(objfile->obj_private))->unwind_info;
if (!ui)
{
read_unwind_info (objfile);
- ui = OBJ_UNWIND_INFO (objfile);
+ if (objfile->obj_private == NULL)
+ error ("Internal error reading unwind information."); /* purecov: deadcode */
+ ui = ((obj_private_data_t *)(objfile->obj_private))->unwind_info;
}
/* First, check the cache */
ldsid (rp),r1 ; Get space associated with RP into r1
mtsp r1,sp ; Move it into space register 0
- be,n 0(sr0),rp) ; back to your regularly scheduled program
- */
+ be,n 0(sr0),rp) ; back to your regularly scheduled program */
/* Maximum known linker stub size is 4 instructions. Search forward
from the given PC, then backward. */
}
/* Return size of frame, or -1 if we should use a frame pointer. */
-int
+static int
find_proc_framesize (pc)
CORE_ADDR pc;
{
struct unwind_table_entry *u;
struct minimal_symbol *msym_us;
+ /* This may indicate a bug in our callers... */
+ if (pc == (CORE_ADDR)0)
+ return -1;
+
u = find_unwind_entry (pc);
if (!u)
{
struct unwind_table_entry *u;
+ /* A function at, and thus a return PC from, address 0? Not in HP-UX! */
+ if (pc == (CORE_ADDR) 0)
+ return 0;
+
u = find_unwind_entry (pc);
if (!u)
if (u->Save_RP)
return -20;
- else if (u->stub_type != 0)
+ else if (u->stub_unwind.stub_type != 0)
{
- switch (u->stub_type)
+ switch (u->stub_unwind.stub_type)
{
case EXPORT:
case IMPORT:
if (u == 0)
return 0;
- return (u->Total_frame_size == 0 && u->stub_type == 0);
+ return (u->Total_frame_size == 0 && u->stub_unwind.stub_type == 0);
}
CORE_ADDR
/* If PC is in a linker stub, then we need to dig the address
the stub will return to out of the stack. */
u = find_unwind_entry (pc);
- if (u && u->stub_type != 0)
- return frame_saved_pc (frame);
+ if (u && u->stub_unwind.stub_type != 0)
+ return FRAME_SAVED_PC (frame);
else
return pc;
}
\f
CORE_ADDR
-frame_saved_pc (frame)
+hppa_frame_saved_pc (frame)
struct frame_info *frame;
{
CORE_ADDR pc = get_frame_pc (frame);
struct unwind_table_entry *u;
+ CORE_ADDR old_pc;
+ int spun_around_loop = 0;
+ int rp_offset = 0;
/* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
at the base of the frame in an interrupt handler. Registers within
}
else
{
- int rp_offset;
+ spun_around_loop = 0;
+ old_pc = pc;
restart:
rp_offset = rp_saved (pc);
+
/* Similar to code in frameless function case. If the next
frame is a signal or interrupt handler, then dig the right
information out of the saved register info. */
pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
}
else if (rp_offset == 0)
- pc = read_register (RP_REGNUM) & ~0x3;
+ {
+ old_pc = pc;
+ pc = read_register (RP_REGNUM) & ~0x3;
+ }
else
- pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3;
+ {
+ old_pc = pc;
+ pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3;
+ }
}
/* If PC is inside a linker stub, then dig out the address the stub
Don't do this for long branch stubs. Why? For some unknown reason
_start is marked as a long branch stub in hpux10. */
u = find_unwind_entry (pc);
- if (u && u->stub_type != 0
- && u->stub_type != LONG_BRANCH)
+ if (u && u->stub_unwind.stub_type != 0
+ && u->stub_unwind.stub_type != LONG_BRANCH)
{
unsigned int insn;
if ((insn & 0xfc00e000) == 0xe8000000)
return (pc + extract_17 (insn) + 8) & ~0x3;
else
- goto restart;
+ {
+ if (old_pc == pc)
+ spun_around_loop++;
+
+ if (spun_around_loop > 1)
+ {
+ /* We're just about to go around the loop again with
+ no more hope of success. Die. */
+ error("Unable to find return pc for this frame");
+ }
+ else
+ goto restart;
+ }
}
return pc;
frame. (we always want frame->frame to point at the lowest address
in the frame). */
if (framesize == -1)
- frame->frame = read_register (FP_REGNUM);
+ frame->frame = TARGET_READ_FP ();
else
frame->frame -= framesize;
return;
sorts, and its base is the high address in its parent's frame. */
framesize = find_proc_framesize(frame->pc);
if (framesize == -1)
- frame->frame = read_register (FP_REGNUM);
+ frame->frame = TARGET_READ_FP ();
else
frame->frame = read_register (SP_REGNUM) - framesize;
}
CORE_ADDR frame_base;
struct frame_info *tmp_frame;
+ CORE_ADDR caller_pc;
+
+ struct minimal_symbol *min_frame_symbol;
+ struct symbol *frame_symbol;
+ char *frame_symbol_name;
+
+ /* If this is a threaded application, and we see the
+ routine "__pthread_exit", treat it as the stack root
+ for this thread. */
+ min_frame_symbol = lookup_minimal_symbol_by_pc (frame->pc);
+ frame_symbol = find_pc_function(frame->pc);
+
+ if ((min_frame_symbol != 0) /* && (frame_symbol == 0) */)
+ {
+ /* The test above for "no user function name" would defend
+ against the slim likelihood that a user might define a
+ routine named "__pthread_exit" and then try to debug it.
+
+ If it weren't commented out, and you tried to debug the
+ pthread library itself, you'd get errors.
+
+ So for today, we don't make that check. */
+ frame_symbol_name = SYMBOL_NAME(min_frame_symbol);
+ if (frame_symbol_name != 0) {
+ if (0 == strncmp(frame_symbol_name,
+ THREAD_INITIAL_FRAME_SYMBOL,
+ THREAD_INITIAL_FRAME_SYM_LEN)) {
+ /* Pretend we've reached the bottom of the stack. */
+ return (CORE_ADDR) 0;
+ }
+ }
+ } /* End of hacky code for threads. */
+
/* Handle HPUX, BSD, and OSF1 style interrupt frames first. These
are easy; at *sp we have a full save state strucutre which we can
pull the old stack pointer from. Also see frame_saved_pc for
/* Get frame sizes for the current frame and the frame of the
caller. */
my_framesize = find_proc_framesize (frame->pc);
+ caller_pc = FRAME_SAVED_PC(frame);
+
+ /* If we can't determine the caller's PC, then it's not likely we can
+ really determine anything meaningful about its frame. We'll consider
+ this to be stack bottom. */
+ if (caller_pc == (CORE_ADDR) 0)
+ return (CORE_ADDR) 0;
+
caller_framesize = find_proc_framesize (FRAME_SAVED_PC(frame));
/* If caller does not have a frame pointer, then its frame
can be found at current_frame - caller_framesize. */
if (caller_framesize != -1)
- return frame_base - caller_framesize;
-
+ {
+ return frame_base - caller_framesize;
+ }
/* Both caller and callee have frame pointers and are GCC compiled
(SAVE_SP bit in unwind descriptor is on for both functions.
The previous frame pointer is found at the top of the current frame. */
if (caller_framesize == -1 && my_framesize == -1)
- return read_memory_integer (frame_base, 4);
-
+ {
+ return read_memory_integer (frame_base, 4);
+ }
/* Caller has a frame pointer, but callee does not. This is a little
more difficult as GCC and HP C lay out locals and callee register save
areas very differently.
think anyone has actually written any tools (not even "strip")
which leave them out of an executable, so maybe this is a moot
point. */
+ /* ??rehrauer: Actually, it's quite possible to stepi your way into
+ code that doesn't have unwind entries. For example, stepping into
+ the dynamic linker will give you a PC that has none. Thus, I've
+ disabled this warning. */
+#if 0
warning ("Unable to find unwind for PC 0x%x -- Help!", tmp_frame->pc);
- return 0;
+#endif
+ return (CORE_ADDR) 0;
}
/* Entry_GR specifies the number of callee-saved general registers
if (u->Save_SP
&& !tmp_frame->signal_handler_caller
&& !pc_in_interrupt_handler (tmp_frame->pc))
- return read_memory_integer (tmp_frame->frame, 4);
+ {
+ return read_memory_integer (tmp_frame->frame, 4);
+ }
/* %r3 was saved somewhere in the stack. Dig it out. */
else
{
{
u = find_unwind_entry (FRAME_SAVED_PC (frame));
if (!u)
- return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ {
+ return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ }
else
- return frame_base - (u->Total_frame_size << 3);
+ {
+ return frame_base - (u->Total_frame_size << 3);
+ }
}
return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
{
u = find_unwind_entry (FRAME_SAVED_PC (frame));
if (!u)
- return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ {
+ return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+ }
else
- return frame_base - (u->Total_frame_size << 3);
+ {
+ return frame_base - (u->Total_frame_size << 3);
+ }
}
/* The value in %r3 was never saved into the stack (thus %r3 still
holds the value of the previous frame pointer). */
- return read_register (FP_REGNUM);
+ return TARGET_READ_FP ();
}
}
was compiled with gcc. */
int
-frame_chain_valid (chain, thisframe)
+hppa_frame_chain_valid (chain, thisframe)
CORE_ADDR chain;
struct frame_info *thisframe;
{
/* If this frame does not save SP, has no stack, isn't a stub,
and doesn't "call" an interrupt routine or signal handler caller,
then its not valid. */
- if (u->Save_SP || u->Total_frame_size || u->stub_type != 0
+ if (u->Save_SP || u->Total_frame_size || u->stub_unwind.stub_type != 0
|| (thisframe->next && thisframe->next->signal_handler_caller)
|| (next_u && next_u->HP_UX_interrupt_marker))
return 1;
}
/*
- * These functions deal with saving and restoring register state
- * around a function call in the inferior. They keep the stack
- * double-word aligned; eventually, on an hp700, the stack will have
- * to be aligned to a 64-byte boundary.
- */
+ These functions deal with saving and restoring register state
+ around a function call in the inferior. They keep the stack
+ double-word aligned; eventually, on an hp700, the stack will have
+ to be aligned to a 64-byte boundary. */
void
push_dummy_frame (inf_status)
int_buffer = read_register (RP_REGNUM) | 0x3;
write_memory (sp - 20, (char *)&int_buffer, 4);
- int_buffer = read_register (FP_REGNUM);
+ int_buffer = TARGET_READ_FP ();
write_memory (sp, (char *)&int_buffer, 4);
write_register (FP_REGNUM, sp);
write_register (SP_REGNUM, sp);
}
-void
+static void
find_dummy_frame_regs (frame, frame_saved_regs)
struct frame_info *frame;
struct frame_saved_regs *frame_saved_regs;
CORE_ADDR fp = frame->frame;
int i;
- frame_saved_regs->regs[RP_REGNUM] = fp - 20 & ~0x3;
+ frame_saved_regs->regs[RP_REGNUM] = (fp - 20) & ~0x3;
frame_saved_regs->regs[FP_REGNUM] = fp;
frame_saved_regs->regs[1] = fp + 8;
else
{
npc = read_register (RP_REGNUM);
- target_write_pc (npc, 0);
+ write_pc (npc);
}
write_register (FP_REGNUM, read_memory_integer (fp, 4));
breakpoint->silent = 1;
/* So we can clean things up. */
- old_chain = make_cleanup (delete_breakpoint, breakpoint);
+ old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
/* Start up the inferior. */
clear_proceed_status ();
flush_cached_frames ();
}
-/*
- * After returning to a dummy on the stack, restore the instruction
- * queue space registers. */
+/* After returning to a dummy on the stack, restore the instruction
+ queue space registers. */
static int
restore_pc_queue (fsr)
write_register (PCOQ_HEAD_REGNUM, pc + 4);
write_register (PCOQ_TAIL_REGNUM, pc + 8);
- /*
- * HPUX doesn't let us set the space registers or the space
- * registers of the PC queue through ptrace. Boo, hiss.
- * Conveniently, the call dummy has this sequence of instructions
- * after the break:
- * mtsp r21, sr0
- * ble,n 0(sr0, r22)
- *
- * So, load up the registers and single step until we are in the
- * right place.
- */
+ /* HPUX doesn't let us set the space registers or the space
+ registers of the PC queue through ptrace. Boo, hiss.
+ Conveniently, the call dummy has this sequence of instructions
+ after the break:
+ mtsp r21, sr0
+ ble,n 0(sr0, r22)
+
+ So, load up the registers and single step until we are in the
+ right place. */
write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM], 4));
write_register (22, new_pc);
return 1;
}
+#if 0
CORE_ADDR
hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
int nargs;
for (i = 0; i < nargs; i++)
{
+ int x = 0;
+ /* cum is the sum of the lengths in bytes of
+ the arguments seen so far */
cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
/* value must go at proper alignment. Assume alignment is a
- power of two.*/
+ power of two. */
alignment = hppa_alignof (VALUE_TYPE (args[i]));
+
if (cum % alignment)
cum = (cum + alignment) & -alignment;
offset[i] = -cum;
+
}
sp += max ((cum + 7) & -8, 16);
write_register (28, struct_addr);
return sp + 32;
}
+#endif
-/*
- * Insert the specified number of args and function address
- * into a call sequence of the above form stored at DUMMYNAME.
- *
- * On the hppa we need to call the stack dummy through $$dyncall.
- * Therefore our version of FIX_CALL_DUMMY takes an extra argument,
- * real_pc, which is the location where gdb should start up the
- * inferior to do the function call.
- */
+/* elz: I am rewriting this function, because the one above is a very
+ obscure piece of code.
+ This function pushes the arguments on the stack. The stack grows up
+ on the PA.
+ Each argument goes in one (or more) word (4 bytes) on the stack.
+ The first four words for the args must be allocated, even if they
+ are not used.
+ The 'topmost' arg is arg0, the 'bottom-most' is arg3. (if you think of
+ them as 1 word long).
+ Below these there can be any number of arguments, as needed by the function.
+ If an arg is bigger than one word, it will be written on the stack
+ occupying as many words as needed. Args that are bigger than 64bits
+ are not copied on the stack, a pointer is passed instead.
+
+ On top of the arg0 word there are other 8 words (32bytes) which are used
+ for other purposes */
+
+CORE_ADDR
+hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
+ int nargs;
+ value_ptr *args;
+ CORE_ADDR sp;
+ int struct_return;
+ CORE_ADDR struct_addr;
+{
+ /* array of arguments' offsets */
+ int *offset = (int *)alloca(nargs * sizeof (int));
+ /* array of arguments' lengths: real lengths in bytes, not aligned to word size */
+ int *lengths = (int *)alloca(nargs * sizeof (int));
+
+ int bytes_reserved; /* this is the number of bytes on the stack occupied by an
+ argument. This will be always a multiple of 4 */
+
+ int cum_bytes_reserved = 0; /* this is the total number of bytes reserved by the args
+ seen so far. It is a multiple of 4 always */
+ int cum_bytes_aligned = 0; /* same as above, but aligned on 8 bytes */
+ int i;
+
+ /* When an arg does not occupy a whole word, for instance in bitfields:
+ if the arg is x bits (0<x<32), it must be written
+ starting from the (x-1)-th position down until the 0-th position.
+ It is enough to align it to the word. */
+ /* if an arg occupies 8 bytes, it must be aligned on the 64-bits
+ high order word in odd arg word. */
+ /* if an arg is larger than 64 bits, we need to pass a pointer to it, and
+ copy the actual value on the stack, so that the callee can play with it.
+ This is taken care of in valops.c in the call_function_by_hand function.
+ The argument that is received in this function here has already be converted
+ to a pointer to whatever is needed, so that it just can be pushed
+ as a word argument */
+
+ for (i = 0; i < nargs; i++)
+ {
+
+ lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
+
+ if (lengths[i] % 4)
+ bytes_reserved = (lengths[i] / 4) * 4 + 4;
+ else
+ bytes_reserved = lengths[i];
+
+ offset[i] = cum_bytes_reserved + lengths[i];
+
+ if ((bytes_reserved == 8) && (offset[i] % 8)) /* if 64-bit arg is not 64 bit aligned */
+ {
+ int new_offset=0;
+ /* bytes_reserved is already aligned to the word, so we put it at one word
+ more down the stack. This will leave one empty word on the
+ stack, and one unused register. This is OK, see the calling
+ convention doc */
+ /* the offset may have to be moved to the corresponding position
+ one word down the stack, to maintain
+ alignment. */
+ new_offset = (offset[i] / 8) * 8 + 8;
+ if ((new_offset - offset[i]) >=4)
+ {
+ bytes_reserved += 4;
+ offset[i] += 4;
+ }
+ }
+
+ cum_bytes_reserved += bytes_reserved;
+
+ }
+
+ /* now move up the sp to reserve at least 4 words required for the args,
+ or more than this if needed */
+ /* wee also need to keep the sp aligned to 8 bytes */
+ cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved);
+ sp += max (cum_bytes_aligned, 16);
+
+ /* now write each of the args at the proper offset down the stack */
+ for (i = 0; i < nargs; i++)
+ write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
+
+
+ /* if a structure has to be returned, set up register 28 to hold its address */
+ if (struct_return)
+ write_register (28, struct_addr);
+
+ /* the stack will have other 8 words on top of the args */
+ return sp + 32;
+}
+
+
+/* elz: this function returns a value which is built looking at the given address.
+ It is called from call_function_by_hand, in case we need to return a
+ value which is larger than 64 bits, and it is stored in the stack rather than
+ in the registers r28 and r29 or fr4.
+ This function does the same stuff as value_being_returned in values.c, but
+ gets the value from the stack rather than from the buffer where all the
+ registers were saved when the function called completed. */
+value_ptr
+hppa_value_returned_from_stack (valtype , addr)
+ register struct type *valtype;
+ CORE_ADDR addr;
+{
+ register value_ptr val;
+
+ val = allocate_value (valtype);
+ CHECK_TYPEDEF (valtype);
+ target_read_memory(addr, VALUE_CONTENTS_RAW (val), TYPE_LENGTH (valtype));
+
+ return val;
+}
+
+
+
+/* elz: Used to lookup a symbol in the shared libraries.
+ This function calls shl_findsym, indirectly through a
+ call to __d_shl_get. __d_shl_get is in end.c, which is always
+ linked in by the hp compilers/linkers.
+ The call to shl_findsym cannot be made directly because it needs
+ to be active in target address space.
+ inputs: - minimal symbol pointer for the function we want to look up
+ - address in target space of the descriptor for the library
+ where we want to look the symbol up.
+ This address is retrieved using the
+ som_solib_get_solib_by_pc function (somsolib.c).
+ output: - real address in the library of the function.
+ note: the handle can be null, in which case shl_findsym will look for
+ the symbol in all the loaded shared libraries.
+ files to look at if you need reference on this stuff:
+ dld.c, dld_shl_findsym.c
+ end.c
+ man entry for shl_findsym */
+
+CORE_ADDR
+find_stub_with_shl_get(function, handle)
+ struct minimal_symbol *function;
+ CORE_ADDR handle;
+{
+ struct symbol *get_sym, *symbol2;
+ struct minimal_symbol *buff_minsym, *msymbol;
+ struct type *ftype;
+ value_ptr *args;
+ value_ptr funcval, val;
+
+ int x, namelen, err_value, tmp = -1;
+ CORE_ADDR endo_buff_addr, value_return_addr, errno_return_addr;
+ CORE_ADDR stub_addr;
+
+
+ args = (value_ptr *) alloca (sizeof (value_ptr) * 8); /* 6 for the arguments and one null one??? */
+ funcval = find_function_in_inferior("__d_shl_get");
+ get_sym = lookup_symbol("__d_shl_get", NULL, VAR_NAMESPACE, NULL, NULL);
+ buff_minsym = lookup_minimal_symbol("__buffer", NULL, NULL);
+ msymbol = lookup_minimal_symbol ("__shldp", NULL, NULL);
+ symbol2 = lookup_symbol("__shldp", NULL, VAR_NAMESPACE, NULL, NULL);
+ endo_buff_addr = SYMBOL_VALUE_ADDRESS (buff_minsym);
+ namelen = strlen(SYMBOL_NAME(function));
+ value_return_addr = endo_buff_addr + namelen;
+ ftype = check_typedef(SYMBOL_TYPE(get_sym));
+
+ /* do alignment */
+ if ((x=value_return_addr % 64) !=0)
+ value_return_addr = value_return_addr + 64 - x;
+
+ errno_return_addr = value_return_addr + 64;
+
+
+ /* set up stuff needed by __d_shl_get in buffer in end.o */
+
+ target_write_memory(endo_buff_addr, SYMBOL_NAME(function), namelen);
+
+ target_write_memory(value_return_addr, (char *) &tmp, 4);
+
+ target_write_memory(errno_return_addr, (char *) &tmp, 4);
+
+ target_write_memory(SYMBOL_VALUE_ADDRESS(msymbol),
+ (char *)&handle, 4);
+
+ /* now prepare the arguments for the call */
+
+ args[0] = value_from_longest (TYPE_FIELD_TYPE(ftype, 0), 12);
+ args[1] = value_from_longest (TYPE_FIELD_TYPE(ftype, 1), SYMBOL_VALUE_ADDRESS(msymbol));
+ args[2] = value_from_longest (TYPE_FIELD_TYPE(ftype, 2), endo_buff_addr);
+ args[3] = value_from_longest (TYPE_FIELD_TYPE(ftype, 3), TYPE_PROCEDURE);
+ args[4] = value_from_longest (TYPE_FIELD_TYPE(ftype, 4), value_return_addr);
+ args[5] = value_from_longest (TYPE_FIELD_TYPE(ftype, 5), errno_return_addr);
+
+ /* now call the function */
+
+ val = call_function_by_hand(funcval, 6, args);
+
+ /* now get the results */
+
+ target_read_memory(errno_return_addr, (char *) &err_value, sizeof(err_value));
+
+ target_read_memory(value_return_addr, (char *) &stub_addr, sizeof(stub_addr));
+ if (stub_addr <= 0)
+ error("call to __d_shl_get failed, error code is %d", err_value); /* purecov: deadcode */
+
+ return(stub_addr);
+}
+
+/* Cover routine for find_stub_with_shl_get to pass to catch_errors */
+static CORE_ADDR
+cover_find_stub_with_shl_get (args)
+ args_for_find_stub * args;
+{
+ return find_stub_with_shl_get (args->msym, args->solib_handle);
+}
+
+
+/* Insert the specified number of args and function address
+ into a call sequence of the above form stored at DUMMYNAME.
+
+ On the hppa we need to call the stack dummy through $$dyncall.
+ Therefore our version of FIX_CALL_DUMMY takes an extra argument,
+ real_pc, which is the location where gdb should start up the
+ inferior to do the function call. */
CORE_ADDR
hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
struct minimal_symbol *trampoline;
int flags = read_register (FLAGS_REGNUM);
struct unwind_table_entry *u;
+ CORE_ADDR new_stub=0;
+ CORE_ADDR solib_handle=0;
trampoline = NULL;
msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
if (msymbol == NULL)
- error ("Can't find an address for $$dyncall trampoline");
+ error ("Can't find an address for $$dyncall trampoline"); /* purecov: deadcode */
dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol);
function in a shared library. We must call an import stub
rather than the export stub or real function for lazy binding
to work correctly. */
- if (som_solib_get_got_by_pc (fun))
+
+ /* elz: let's see if fun is in a shared library */
+ solib_handle = som_solib_get_solib_by_pc(fun);
+
+ /* elz: for 10.30 and 11.00 the calls via __d_plt_call cannot be made
+ via import stubs, only via plables, so this code here becomes useless.
+ On 10.20, the plables mechanism works too, so we just ignore this import
+ stub stuff */
+#if 0
+ if (solib_handle)
{
struct objfile *objfile;
struct minimal_symbol *funsymbol, *stub_symbol;
{
struct unwind_table_entry *u;
/* It must be a shared library trampoline. */
- if (SYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
+ if (MSYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
continue;
/* It must also be an import stub. */
u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
- if (!u || u->stub_type != IMPORT)
+ if (!u || u->stub_unwind.stub_type != IMPORT)
continue;
/* OK. Looks like the correct import stub. */
if (newfun == 0)
write_register (19, som_solib_get_got_by_pc (fun));
}
+#endif /* end of if 0 */
#endif
}
the value in sp-24 will get fried and you end up returning to the
wrong location. You can't call the import stub directly as the code
to bind the PLT entry to a function can't return to a stack address.) */
+
+ /* elz:
+ There does not have to be an import stub to call a routine in a
+ different load module (note: a "load module" is an a.out or a shared
+ library). If you call a routine indirectly, going through $$dyncall (or
+ $$dyncall_external), you won't go through an import stub. Import stubs
+ are only used for direct calls to an imported routine.
+
+ What you (wdb) need is to go through $$dyncall with a proper plabel for
+ the imported routine. shl_findsym() returns you the address of a plabel
+ suitable for use in making an indirect call through, e.g., through
+ $$dyncall.
+ This is taken care below with the call to find_stub_.... */
+#if 0
+ /* elz: this check here is not necessary if we are going to call stuff through
+ plabels only, we just now check whether the function we call is in a shlib */
u = find_unwind_entry (fun);
- if (u && u->stub_type == IMPORT)
+
+ if (u && u->stub_unwind.stub_type == IMPORT ||
+ (!(u && u->stub_unwind.stub_type == IMPORT) && solib_handle))
+#endif /* 0 */
+ if (solib_handle)
{
CORE_ADDR new_fun;
trampoline = lookup_minimal_symbol ("__d_plt_call", NULL, NULL);
if (trampoline == NULL)
- error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline");
-
+ {
+ error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline\nSuggest linking executable with -g (links in /opt/langtools/lib/end.o)");
+ }
/* This is where sr4export will jump to. */
new_fun = SYMBOL_VALUE_ADDRESS (trampoline);
if (strcmp (SYMBOL_NAME (trampoline), "__d_plt_call") == 0)
{
+ /* if the function is in a shared library, but we have no import sub for
+ it, we need to get the plabel from a call to __d_shl_get, which is a
+ function in end.o. To call this function we need to set up various things */
+
+ /* actually now we just use the plabel any time we make the call,
+ because on 10.30 and 11.00 this is the only acceptable way. This also
+ works fine for 10.20 */
+ /* if (!(u && u->stub_unwind.stub_type == IMPORT) && solib_handle) */
+ {
+ struct minimal_symbol *fmsymbol = lookup_minimal_symbol_by_pc(fun);
+
+ new_stub = find_stub_with_shl_get(fmsymbol, solib_handle);
+
+ if (new_stub == NULL)
+ error("Can't find an import stub for %s", SYMBOL_NAME(fmsymbol)); /* purecov: deadcode */
+ }
+
/* We have to store the address of the stub in __shlib_funcptr. */
- msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
- (struct objfile *)NULL);
- if (msymbol == NULL)
- error ("Can't find an address for __shlib_funcptr");
+ msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
+ (struct objfile *)NULL);
+ if (msymbol == NULL)
+ error ("Can't find an address for __shlib_funcptr"); /* purecov: deadcode */
- target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&fun, 4);
+ /* if (new_stub != NULL) */
+ target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&new_stub, 4);
+ /* this is no longer used */
+ /* else
+ target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&fun, 4); */
/* We want sr4export to call __d_plt_call, so we claim it is
the final target. Clear trampoline. */
- fun = new_fun;
- trampoline = NULL;
+ fun = new_fun;
+ trampoline = NULL;
}
}
{
msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL);
if (msymbol == NULL)
- error ("Can't find an address for _sr4export trampoline");
+ error ("Can't find an address for _sr4export trampoline"); /* purecov: deadcode */
trampoline_addr = SYMBOL_VALUE_ADDRESS (msymbol);
}
}
+
+
+
+/* If the pid is in a syscall, then the FP register is not readable.
+ We'll return zero in that case, rather than attempting to read it
+ and cause a warning. */
+CORE_ADDR
+target_read_fp (pid)
+ int pid;
+{
+ int flags = read_register (FLAGS_REGNUM);
+
+ if (flags & 2) {
+ return (CORE_ADDR) 0;
+ }
+
+ /* This is the only site that may directly read_register () the FP
+ register. All others must use TARGET_READ_FP (). */
+ return read_register (FP_REGNUM);
+}
+
+
/* Get the PC from %r31 if currently in a syscall. Also mask out privilege
bits. */
target_read_pc (pid)
int pid;
{
- int flags = read_register (FLAGS_REGNUM);
+ int flags = read_register_pid (FLAGS_REGNUM, pid);
- if (flags & 2) {
- return read_register (31) & ~0x3;
- }
- return read_register (PC_REGNUM) & ~0x3;
+ /* The following test does not belong here. It is OS-specific, and belongs
+ in native code. */
+ /* Test SS_INSYSCALL */
+ if (flags & 2)
+ return read_register_pid (31, pid) & ~0x3;
+
+ return read_register_pid (PC_REGNUM, pid) & ~0x3;
}
/* Write out the PC. If currently in a syscall, then also write the new
CORE_ADDR v;
int pid;
{
- int flags = read_register (FLAGS_REGNUM);
+ int flags = read_register_pid (FLAGS_REGNUM, pid);
+ /* The following test does not belong here. It is OS-specific, and belongs
+ in native code. */
/* If in a syscall, then set %r31. Also make sure to get the
privilege bits set correctly. */
+ /* Test SS_INSYSCALL */
if (flags & 2)
- write_register (31, (long) (v | 0x3));
+ write_register_pid (31, v | 0x3, pid);
- write_register (PC_REGNUM, (long) v);
- write_register (NPC_REGNUM, (long) v + 4);
+ write_register_pid (PC_REGNUM, v, pid);
+ write_register_pid (NPC_REGNUM, v + 4, pid);
}
/* return the alignment of a type in bytes. Structures have the maximum
return hppa_alignof (TYPE_FIELD_TYPE (type, 0));
case TYPE_CODE_STRUCT:
case TYPE_CODE_UNION:
- max_align = 2;
+ max_align = 1;
for (i = 0; i < TYPE_NFIELDS (type); i++)
{
/* Bit fields have no real alignment. */
- if (!TYPE_FIELD_BITPOS (type, i))
+ /* if (!TYPE_FIELD_BITPOS (type, i)) */
+ if (!TYPE_FIELD_BITSIZE (type, i)) /* elz: this should be bitsize */
{
align = hppa_alignof (TYPE_FIELD_TYPE (type, i));
max_align = max (max_align, align);
{
char raw_regs [REGISTER_BYTES];
int i;
-
+
+ /* Make a copy of gdb's save area (may cause actual
+ reads from the target). */
for (i = 0; i < NUM_REGS; i++)
read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
+
if (regnum == -1)
pa_print_registers (raw_regs, regnum, fpregs);
- else if (regnum < FP0_REGNUM)
- printf_unfiltered ("%s %x\n", reg_names[regnum], *(long *)(raw_regs +
- REGISTER_BYTE (regnum)));
+ else if (regnum < FP4_REGNUM) {
+ long reg_val[2];
+
+ /* Why is the value not passed through "extract_signed_integer"
+ as in "pa_print_registers" below? */
+ pa_register_look_aside(raw_regs, regnum, ®_val[0]);
+
+ if(!is_pa_2) {
+ printf_unfiltered ("%s %x\n", REGISTER_NAME (regnum), reg_val[1]);
+ }
+ else {
+ /* Fancy % formats to prevent leading zeros. */
+ if(reg_val[0] == 0)
+ printf_unfiltered("%s %x\n", REGISTER_NAME (regnum), reg_val[1]);
+ else
+ printf_unfiltered("%s %x%8.8x\n", REGISTER_NAME (regnum),
+ reg_val[0], reg_val[1]);
+ }
+ }
else
+ /* Note that real floating point values only start at
+ FP4_REGNUM. FP0 and up are just status and error
+ registers, which have integral (bit) values. */
pa_print_fp_reg (regnum);
}
+/********** new function ********************/
+void
+pa_do_strcat_registers_info (regnum, fpregs, stream, precision)
+ int regnum;
+ int fpregs;
+ GDB_FILE *stream;
+ enum precision_type precision;
+{
+ char raw_regs [REGISTER_BYTES];
+ int i;
+
+ /* Make a copy of gdb's save area (may cause actual
+ reads from the target). */
+ for (i = 0; i < NUM_REGS; i++)
+ read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
+
+ if (regnum == -1)
+ pa_strcat_registers (raw_regs, regnum, fpregs, stream);
+
+ else if (regnum < FP4_REGNUM) {
+ long reg_val[2];
+
+ /* Why is the value not passed through "extract_signed_integer"
+ as in "pa_print_registers" below? */
+ pa_register_look_aside(raw_regs, regnum, ®_val[0]);
+
+ if(!is_pa_2) {
+ fprintf_unfiltered (stream, "%s %x", REGISTER_NAME (regnum), reg_val[1]);
+ }
+ else {
+ /* Fancy % formats to prevent leading zeros. */
+ if(reg_val[0] == 0)
+ fprintf_unfiltered(stream, "%s %x", REGISTER_NAME (regnum),
+ reg_val[1]);
+ else
+ fprintf_unfiltered(stream, "%s %x%8.8x", REGISTER_NAME (regnum),
+ reg_val[0], reg_val[1]);
+ }
+ }
+ else
+ /* Note that real floating point values only start at
+ FP4_REGNUM. FP0 and up are just status and error
+ registers, which have integral (bit) values. */
+ pa_strcat_fp_reg (regnum, stream, precision);
+}
+
+/* If this is a PA2.0 machine, fetch the real 64-bit register
+ value. Otherwise use the info from gdb's saved register area.
+
+ Note that reg_val is really expected to be an array of longs,
+ with two elements. */
+static void
+pa_register_look_aside(raw_regs, regnum, raw_val)
+ char *raw_regs;
+ int regnum;
+ long *raw_val;
+{
+ static int know_which = 0; /* False */
+
+ int regaddr;
+ unsigned int offset;
+ register int i;
+ int start;
+
+
+ char buf[MAX_REGISTER_RAW_SIZE];
+ long long reg_val;
+
+ if(!know_which) {
+ if(CPU_PA_RISC2_0 == sysconf(_SC_CPU_VERSION)) {
+ is_pa_2 = (1==1);
+ }
+
+ know_which = 1; /* True */
+ }
+
+ raw_val[0] = 0;
+ raw_val[1] = 0;
+
+ if(!is_pa_2) {
+ raw_val[1] = *(long *)(raw_regs + REGISTER_BYTE(regnum));
+ return;
+ }
+
+ /* Code below copied from hppah-nat.c, with fixes for wide
+ registers, using different area of save_state, etc. */
+ if(regnum == FLAGS_REGNUM || regnum >= FP0_REGNUM) {
+ /* Use narrow regs area of save_state and default macro. */
+ offset = U_REGS_OFFSET;
+ regaddr = register_addr(regnum, offset);
+ start = 1;
+ }
+ else {
+ /* Use wide regs area, and calculate registers as 8 bytes wide.
+
+ We'd like to do this, but current version of "C" doesn't
+ permit "offsetof":
+
+ offset = offsetof(save_state_t, ss_wide);
+
+ Note that to avoid "C" doing typed pointer arithmetic, we
+ have to cast away the type in our offset calculation:
+ otherwise we get an offset of 1! */
+ save_state_t temp;
+ offset = ((int) &temp.ss_wide) - ((int) &temp);
+ regaddr = offset + regnum * 8;
+ start = 0;
+ }
+
+ for(i = start; i < 2; i++)
+ {
+ errno = 0;
+ raw_val[i] = call_ptrace (PT_RUREGS, inferior_pid,
+ (PTRACE_ARG3_TYPE) regaddr, 0);
+ if (errno != 0)
+ {
+ /* Warning, not error, in case we are attached; sometimes the
+ kernel doesn't let us at the registers. */
+ char *err = safe_strerror (errno);
+ char *msg = alloca (strlen (err) + 128);
+ sprintf (msg, "reading register %s: %s", REGISTER_NAME (regnum), err);
+ warning (msg);
+ goto error_exit;
+ }
+
+ regaddr += sizeof (long);
+ }
+
+ if (regnum == PCOQ_HEAD_REGNUM || regnum == PCOQ_TAIL_REGNUM)
+ raw_val[1] &= ~0x3; /* I think we're masking out space bits */
+
+error_exit:
+ ;
+}
+
+/* "Info all-reg" command */
+
static void
pa_print_registers (raw_regs, regnum, fpregs)
char *raw_regs;
int fpregs;
{
int i,j;
- long val;
+ long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */
+ long long_val;
for (i = 0; i < 18; i++)
{
for (j = 0; j < 4; j++)
{
- val =
- extract_signed_integer (raw_regs + REGISTER_BYTE (i+(j*18)), 4);
- printf_unfiltered ("%8.8s: %8x ", reg_names[i+(j*18)], val);
+ /* Q: Why is the value passed through "extract_signed_integer",
+ while above, in "pa_do_registers_info" it isn't?
+ A: ? */
+ pa_register_look_aside(raw_regs, i+(j*18), &raw_val[0]);
+
+ /* Even fancier % formats to prevent leading zeros
+ and still maintain the output in columns. */
+ if(!is_pa_2) {
+ /* Being big-endian, on this machine the low bits
+ (the ones we want to look at) are in the second longword. */
+ long_val = extract_signed_integer (&raw_val[1], 4);
+ printf_filtered ("%8.8s: %8x ",
+ REGISTER_NAME (i+(j*18)), long_val);
+ }
+ else {
+ /* raw_val = extract_signed_integer(&raw_val, 8); */
+ if(raw_val[0] == 0)
+ printf_filtered("%8.8s: %8x ",
+ REGISTER_NAME (i+(j*18)), raw_val[1]);
+ else
+ printf_filtered("%8.8s: %8x%8.8x ", REGISTER_NAME (i+(j*18)),
+ raw_val[0], raw_val[1]);
+ }
}
printf_unfiltered ("\n");
}
if (fpregs)
- for (i = 72; i < NUM_REGS; i++)
+ for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */
pa_print_fp_reg (i);
}
+/************* new function ******************/
+static void
+pa_strcat_registers (raw_regs, regnum, fpregs, stream)
+ char *raw_regs;
+ int regnum;
+ int fpregs;
+ GDB_FILE *stream;
+{
+ int i,j;
+ long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */
+ long long_val;
+ enum precision_type precision;
+
+ precision = unspecified_precision;
+
+ for (i = 0; i < 18; i++)
+ {
+ for (j = 0; j < 4; j++)
+ {
+ /* Q: Why is the value passed through "extract_signed_integer",
+ while above, in "pa_do_registers_info" it isn't?
+ A: ? */
+ pa_register_look_aside(raw_regs, i+(j*18), &raw_val[0]);
+
+ /* Even fancier % formats to prevent leading zeros
+ and still maintain the output in columns. */
+ if(!is_pa_2) {
+ /* Being big-endian, on this machine the low bits
+ (the ones we want to look at) are in the second longword. */
+ long_val = extract_signed_integer(&raw_val[1], 4);
+ fprintf_filtered (stream, "%8.8s: %8x ", REGISTER_NAME (i+(j*18)), long_val);
+ }
+ else {
+ /* raw_val = extract_signed_integer(&raw_val, 8); */
+ if(raw_val[0] == 0)
+ fprintf_filtered(stream, "%8.8s: %8x ", REGISTER_NAME (i+(j*18)),
+ raw_val[1]);
+ else
+ fprintf_filtered(stream, "%8.8s: %8x%8.8x ", REGISTER_NAME (i+(j*18)),
+ raw_val[0], raw_val[1]);
+ }
+ }
+ fprintf_unfiltered (stream, "\n");
+ }
+
+ if (fpregs)
+ for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */
+ pa_strcat_fp_reg (i, stream, precision);
+}
+
static void
pa_print_fp_reg (i)
int i;
{
- unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
- unsigned char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
/* Get 32bits of data. */
read_relative_register_raw_bytes (i, raw_buffer);
/* Put it in the buffer. No conversions are ever necessary. */
memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i));
- fputs_filtered (reg_names[i], gdb_stdout);
- print_spaces_filtered (8 - strlen (reg_names[i]), gdb_stdout);
+ fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+ print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout);
fputs_filtered ("(single precision) ", gdb_stdout);
- val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, gdb_stdout, 0,
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0,
1, 0, Val_pretty_default);
printf_filtered ("\n");
REGISTER_RAW_SIZE (i));
/* Dump it as a double. */
- fputs_filtered (reg_names[i], gdb_stdout);
- print_spaces_filtered (8 - strlen (reg_names[i]), gdb_stdout);
+ fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+ print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout);
fputs_filtered ("(double precision) ", gdb_stdout);
- val_print (builtin_type_double, virtual_buffer, 0, gdb_stdout, 0,
+ val_print (builtin_type_double, virtual_buffer, 0, 0, gdb_stdout, 0,
1, 0, Val_pretty_default);
printf_filtered ("\n");
}
}
+/*************** new function ***********************/
+static void
+pa_strcat_fp_reg (i, stream, precision)
+ int i;
+ GDB_FILE *stream;
+ enum precision_type precision;
+{
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+
+ fputs_filtered (REGISTER_NAME (i), stream);
+ print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), stream);
+
+ /* Get 32bits of data. */
+ read_relative_register_raw_bytes (i, raw_buffer);
+
+ /* Put it in the buffer. No conversions are ever necessary. */
+ memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i));
+
+ if (precision == double_precision && (i % 2) == 0)
+ {
+
+ char raw_buf[MAX_REGISTER_RAW_SIZE];
+
+ /* Get the data in raw format for the 2nd half. */
+ read_relative_register_raw_bytes (i + 1, raw_buf);
+
+ /* Copy it into the appropriate part of the virtual buffer. */
+ memcpy (virtual_buffer + REGISTER_RAW_SIZE(i), raw_buf, REGISTER_RAW_SIZE (i));
+
+ val_print (builtin_type_double, virtual_buffer, 0, 0 , stream, 0,
+ 1, 0, Val_pretty_default);
+
+ }
+ else {
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, stream, 0,
+ 1, 0, Val_pretty_default);
+ }
+
+}
+
/* Return one if PC is in the call path of a trampoline, else return zero.
Note we return one for *any* call trampoline (long-call, arg-reloc), not
return 0;
/* If this isn't a linker stub, then return now. */
- if (u->stub_type == 0)
+ if (u->stub_unwind.stub_type == 0)
return 0;
/* By definition a long-branch stub is a call stub. */
- if (u->stub_type == LONG_BRANCH)
+ if (u->stub_unwind.stub_type == LONG_BRANCH)
return 1;
/* The call and return path execute the same instructions within
an IMPORT stub! So an IMPORT stub is both a call and return
trampoline. */
- if (u->stub_type == IMPORT)
+ if (u->stub_unwind.stub_type == IMPORT)
return 1;
/* Parameter relocation stubs always have a call path and may have a
return path. */
- if (u->stub_type == PARAMETER_RELOCATION
- || u->stub_type == EXPORT)
+ if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
+ || u->stub_unwind.stub_type == EXPORT)
{
CORE_ADDR addr;
}
/* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n");
- return 0;
+ warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */
+ return 0; /* purecov: deadcode */
}
/* Unknown stub type. For now, just return zero. */
- return 0;
+ return 0; /* purecov: deadcode */
}
/* Return one if PC is in the return path of a trampoline, else return zero.
/* If this isn't a linker stub or it's just a long branch stub, then
return zero. */
- if (u->stub_type == 0 || u->stub_type == LONG_BRANCH)
+ if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH)
return 0;
/* The call and return path execute the same instructions within
an IMPORT stub! So an IMPORT stub is both a call and return
trampoline. */
- if (u->stub_type == IMPORT)
+ if (u->stub_unwind.stub_type == IMPORT)
return 1;
/* Parameter relocation stubs always have a call path and may have a
return path. */
- if (u->stub_type == PARAMETER_RELOCATION
- || u->stub_type == EXPORT)
+ if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
+ || u->stub_unwind.stub_type == EXPORT)
{
CORE_ADDR addr;
}
/* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n");
- return 0;
+ warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */
+ return 0; /* purecov: deadcode */
}
/* Unknown stub type. For now, just return zero. */
- return 0;
+ return 0; /* purecov: deadcode */
}
calling an argument relocation stub. It even handles some stubs
used in dynamic executables. */
+# if 0
+CORE_ADDR
+skip_trampoline_code (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ return find_solib_trampoline_target(pc);
+}
+
+#endif
+
CORE_ADDR
skip_trampoline_code (pc, name)
CORE_ADDR pc;
long orig_pc = pc;
long prev_inst, curr_inst, loc;
static CORE_ADDR dyncall = 0;
+ static CORE_ADDR dyncall_external = 0;
static CORE_ADDR sr4export = 0;
struct minimal_symbol *msym;
struct unwind_table_entry *u;
+
/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
new exec file */
dyncall = -1;
}
+ if (!dyncall_external)
+ {
+ msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL);
+ if (msym)
+ dyncall_external = SYMBOL_VALUE_ADDRESS (msym);
+ else
+ dyncall_external = -1;
+ }
+
if (!sr4export)
{
msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
if (pc & 0x2)
pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
}
+ if (pc == dyncall_external)
+ {
+ pc = (CORE_ADDR) read_register (22);
+ pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
+ }
else if (pc == sr4export)
pc = (CORE_ADDR) (read_register (22));
return 0;
/* If this isn't a linker stub, then return now. */
- if (u->stub_type == 0)
- return orig_pc == pc ? 0 : pc & ~0x3;
+ /* elz: attention here! (FIXME) because of a compiler/linker
+ error, some stubs which should have a non zero stub_unwind.stub_type
+ have unfortunately a value of zero. So this function would return here
+ as if we were not in a trampoline. To fix this, we go look at the partial
+ symbol information, which reports this guy as a stub.
+ (FIXME): Unfortunately, we are not that lucky: it turns out that the
+ partial symbol information is also wrong sometimes. This is because
+ when it is entered (somread.c::som_symtab_read()) it can happen that
+ if the type of the symbol (from the som) is Entry, and the symbol is
+ in a shared library, then it can also be a trampoline. This would
+ be OK, except that I believe the way they decide if we are ina shared library
+ does not work. SOOOO..., even if we have a regular function w/o trampolines
+ its minimal symbol can be assigned type mst_solib_trampoline.
+ Also, if we find that the symbol is a real stub, then we fix the unwind
+ descriptor, and define the stub type to be EXPORT.
+ Hopefully this is correct most of the times. */
+ if (u->stub_unwind.stub_type == 0)
+ {
+
+/* elz: NOTE (FIXME!) once the problem with the unwind information is fixed
+ we can delete all the code which appears between the lines */
+/*--------------------------------------------------------------------------*/
+ msym = lookup_minimal_symbol_by_pc (pc);
+
+ if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline)
+ return orig_pc == pc ? 0 : pc & ~0x3;
+
+ else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline)
+ {
+ struct objfile *objfile;
+ struct minimal_symbol *msymbol;
+ int function_found = 0;
+
+ /* go look if there is another minimal symbol with the same name as
+ this one, but with type mst_text. This would happen if the msym
+ is an actual trampoline, in which case there would be another
+ symbol with the same name corresponding to the real function */
+
+ ALL_MSYMBOLS (objfile, msymbol)
+ {
+ if (MSYMBOL_TYPE (msymbol) == mst_text
+ && STREQ (SYMBOL_NAME (msymbol) , SYMBOL_NAME (msym)))
+ {
+ function_found = 1;
+ break;
+ }
+ }
+
+ if (function_found)
+ /* the type of msym is correct (mst_solib_trampoline), but
+ the unwind info is wrong, so set it to the correct value */
+ u->stub_unwind.stub_type = EXPORT;
+ else
+ /* the stub type info in the unwind is correct (this is not a
+ trampoline), but the msym type information is wrong, it
+ should be mst_text. So we need to fix the msym, and also
+ get out of this function */
+ {
+ MSYMBOL_TYPE (msym) = mst_text;
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+ }
+
+/*--------------------------------------------------------------------------*/
+ }
/* It's a stub. Search for a branch and figure out where it goes.
Note we have to handle multi insn branch sequences like ldil;ble.
Most (all?) other branches can be determined by examining the contents
of certain registers and the stack. */
+
loc = pc;
curr_inst = 0;
prev_inst = 0;
}
}
- /* Does it look like a be 0(sr0,%r21)? That's the branch from an
+ /* Does it look like a be 0(sr0,%r21)? OR
+ Does it look like a be, n 0(sr0,%r21)? OR
+ Does it look like a bve (r21)? (this is on PA2.0)
+ Does it look like a bve, n(r21)? (this is also on PA2.0)
+ That's the branch from an
import stub to an export stub.
It is impossible to determine the target of the branch via
Then lookup a minimal symbol with the same name; we should
get the minimal symbol for the target routine in the shared
library as those take precedence of import/export stubs. */
- if (curr_inst == 0xe2a00000)
+ if ((curr_inst == 0xe2a00000) ||
+ (curr_inst == 0xe2a00002) ||
+ (curr_inst == 0xeaa0d000) ||
+ (curr_inst == 0xeaa0d002))
{
struct minimal_symbol *stubsym, *libsym;
/* Does it look like bl X,%rp or bl X,%r0? Another way to do a
branch from the stub to the actual function. */
+ /*elz*/
else if ((curr_inst & 0xffe0e000) == 0xe8400000
- || (curr_inst & 0xffe0e000) == 0xe8000000)
+ || (curr_inst & 0xffe0e000) == 0xe8000000
+ || (curr_inst & 0xffe0e000) == 0xe800A000)
return (loc + extract_17 (curr_inst) + 8) & ~0x3;
/* Does it look like bv (rp)? Note this depends on the
current stack pointer being the same as the stack
pointer in the stub itself! This is a branch on from the
stub back to the original caller. */
- else if ((curr_inst & 0xffe0e000) == 0xe840c000)
+ /*else if ((curr_inst & 0xffe0e000) == 0xe840c000)*/
+ else if ((curr_inst & 0xffe0f000) == 0xe840c000)
{
/* Yup. See if the previous instruction loaded
rp from sp - 8. */
}
}
+ /* elz: added this case to capture the new instruction
+ at the end of the return part of an export stub used by
+ the PA2.0: BVE, n (rp) */
+ else if ((curr_inst & 0xffe0f000) == 0xe840d000)
+ {
+ return (read_memory_integer
+ (read_register (SP_REGNUM) - 24, 4)) & ~0x3;
+ }
+
/* What about be,n 0(sr0,%rp)? It's just another way we return to
the original caller from the stub. Used in dynamic executables. */
else if (curr_inst == 0xe0400002)
}
}
+
/* For the given instruction (INST), return any adjustment it makes
to the stack pointer or zero for no adjustment.
inst_saves_fr (inst)
unsigned long inst;
{
+ /* is this an FSTDS ?*/
if ((inst & 0xfc00dfc0) == 0x2c001200)
return extract_5r_store (inst);
+ /* is this an FSTWS ?*/
+ if ((inst & 0xfc00df80) == 0x24001200)
+ return extract_5r_store (inst);
return 0;
}
Use information in the unwind table to determine what exactly should
be in the prologue. */
+
CORE_ADDR
-skip_prologue (pc)
+skip_prologue_hard_way (pc)
CORE_ADDR pc;
{
char buf[4];
if (!u)
return pc;
- /* If we are not at the beginning of a function, then return now. */
+ /* If we are not at the beginning of a function, then return now. */
if ((pc & ~0x3) != u->region_start)
return pc;
but never were, mask them out and restart.
This should only happen in optimized code, and should be very rare. */
- if (save_gr || save_fr
- && ! (restart_fr || restart_gr))
+ if (save_gr || (save_fr && ! (restart_fr || restart_gr)))
{
pc = orig_pc;
restart_gr = save_gr;
return pc;
}
+
+
+
+
+/* return 0 if we cannot determine the end of the prologue,
+ return the new pc value if we know where the prologue ends */
+
+static CORE_ADDR
+after_prologue (pc)
+ CORE_ADDR pc;
+{
+ struct symtab_and_line sal;
+ CORE_ADDR func_addr, func_end;
+ struct symbol *f;
+
+ if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ return 0; /* Unknown */
+
+ f = find_pc_function (pc);
+ if (!f)
+ return 0; /* no debug info, do it the hard way! */
+
+ sal = find_pc_line (func_addr, 0);
+
+ if (sal.end < func_end)
+ {
+ /* this happens when the function has no prologue, because the way
+ find_pc_line works: elz. Note: this may not be a very good
+ way to decide whether a function has a prologue or not, but
+ it is the best I can do with the info available
+ Also, this will work for functions like: int f()
+ {
+ return 2;
+ }
+ I.e. the bp will be inserted at the first open brace.
+ For functions where the body is only one line written like this:
+ int f()
+ { return 2; }
+ this will make the breakpoint to be at the last brace, after the body
+ has been executed already. What's the point of stepping through a function
+ without any variables anyway?? */
+
+ if ((SYMBOL_LINE(f) > 0) && (SYMBOL_LINE(f) < sal.line))
+ return pc; /*no adjusment will be made*/
+ else
+ return sal.end; /* this is the end of the prologue */
+ }
+ /* The line after the prologue is after the end of the function. In this
+ case, put the end of the prologue is the beginning of the function. */
+ /* This should happen only when the function is prologueless and has no
+ code in it. For instance void dumb(){} Note: this kind of function
+ is used quite a lot in the test system */
+
+ else return pc; /* no adjustment will be made */
+}
+
+/* To skip prologues, I use this predicate. Returns either PC itself
+ if the code at PC does not look like a function prologue; otherwise
+ returns an address that (if we're lucky) follows the prologue. If
+ LENIENT, then we must skip everything which is involved in setting
+ up the frame (it's OK to skip more, just so long as we don't skip
+ anything which might clobber the registers which are being saved.
+ Currently we must not skip more on the alpha, but we might the lenient
+ stuff some day. */
+
+CORE_ADDR
+skip_prologue (pc)
+ CORE_ADDR pc;
+{
+ unsigned long inst;
+ int offset;
+ CORE_ADDR post_prologue_pc;
+ char buf[4];
+
+#ifdef GDB_TARGET_HAS_SHARED_LIBS
+ /* Silently return the unaltered pc upon memory errors.
+ This could happen on OSF/1 if decode_line_1 tries to skip the
+ prologue for quickstarted shared library functions when the
+ shared library is not yet mapped in.
+ Reading target memory is slow over serial lines, so we perform
+ this check only if the target has shared libraries. */
+ if (target_read_memory (pc, buf, 4))
+ return pc;
+#endif
+
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
+
+ post_prologue_pc = after_prologue (pc);
+
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+
+
+ /* Can't determine prologue from the symbol table, (this can happen if there
+ is no debug information) so we need to fall back on the old code, which
+ looks at the instructions */
+ /* FIXME (elz) !!!!: this may create a problem if, once the bp is hit, the user says
+ where: the backtrace info is not right: this is because the point at which we
+ break is at the very first instruction of the function. At this time the stuff that
+ needs to be saved on the stack, has not been saved yet, so the backtrace
+ cannot know all it needs to know. This will need to be fixed in the
+ actual backtrace code. (Note: this is what DDE does) */
+
+ else
+
+ return (skip_prologue_hard_way(pc));
+
+#if 0
+/* elz: I am keeping this code around just in case, but remember, all the
+ instructions are for alpha: you should change all to the hppa instructions */
+
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ /* Skip the typical prologue instructions. These are the stack adjustment
+ instruction and the instructions that save registers on the stack
+ or in the gcc frame. */
+ for (offset = 0; offset < 100; offset += 4)
+ {
+ int status;
+
+ status = read_memory_nobpt (pc + offset, buf, 4);
+ if (status)
+ memory_error (status, pc + offset);
+ inst = extract_unsigned_integer (buf, 4);
+
+ /* The alpha has no delay slots. But let's keep the lenient stuff,
+ we might need it for something else in the future. */
+ if (lenient && 0)
+ continue;
+
+ if ((inst & 0xffff0000) == 0x27bb0000) /* ldah $gp,n($t12) */
+ continue;
+ if ((inst & 0xffff0000) == 0x23bd0000) /* lda $gp,n($gp) */
+ continue;
+ if ((inst & 0xffff0000) == 0x23de0000) /* lda $sp,n($sp) */
+ continue;
+ else if ((inst & 0xfc1f0000) == 0xb41e0000
+ && (inst & 0xffff0000) != 0xb7fe0000)
+ continue; /* stq reg,n($sp) */
+ /* reg != $zero */
+ else if ((inst & 0xfc1f0000) == 0x9c1e0000
+ && (inst & 0xffff0000) != 0x9ffe0000)
+ continue; /* stt reg,n($sp) */
+ /* reg != $zero */
+ else if (inst == 0x47de040f) /* bis sp,sp,fp */
+ continue;
+ else
+ break;
+ }
+ return pc + offset;
+#endif /* 0 */
+}
+
/* Put here the code to store, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
This includes special registers such as pc and fp saved in special
}
}
+
+/* Exception handling support for the HP-UX ANSI C++ compiler.
+ The compiler (aCC) provides a callback for exception events;
+ GDB can set a breakpoint on this callback and find out what
+ exception event has occurred. */
+
+/* The name of the hook to be set to point to the callback function */
+static char HP_ACC_EH_notify_hook[] = "__eh_notify_hook";
+/* The name of the function to be used to set the hook value */
+static char HP_ACC_EH_set_hook_value[] = "__eh_set_hook_value";
+/* The name of the callback function in end.o */
+static char HP_ACC_EH_notify_callback[] = "__d_eh_notify_callback";
+/* Name of function in end.o on which a break is set (called by above) */
+static char HP_ACC_EH_break[] = "__d_eh_break";
+/* Name of flag (in end.o) that enables catching throws */
+static char HP_ACC_EH_catch_throw[] = "__d_eh_catch_throw";
+/* Name of flag (in end.o) that enables catching catching */
+static char HP_ACC_EH_catch_catch[] = "__d_eh_catch_catch";
+/* The enum used by aCC */
+typedef enum {
+ __EH_NOTIFY_THROW,
+ __EH_NOTIFY_CATCH
+} __eh_notification;
+
+/* Is exception-handling support available with this executable? */
+static int hp_cxx_exception_support = 0;
+/* Has the initialize function been run? */
+int hp_cxx_exception_support_initialized = 0;
+/* Similar to above, but imported from breakpoint.c -- non-target-specific */
+extern int exception_support_initialized;
+/* Address of __eh_notify_hook */
+static CORE_ADDR eh_notify_hook_addr = NULL;
+/* Address of __d_eh_notify_callback */
+static CORE_ADDR eh_notify_callback_addr = NULL;
+/* Address of __d_eh_break */
+static CORE_ADDR eh_break_addr = NULL;
+/* Address of __d_eh_catch_catch */
+static CORE_ADDR eh_catch_catch_addr = NULL;
+/* Address of __d_eh_catch_throw */
+static CORE_ADDR eh_catch_throw_addr = NULL;
+/* Sal for __d_eh_break */
+static struct symtab_and_line * break_callback_sal = NULL;
+
+/* Code in end.c expects __d_pid to be set in the inferior,
+ otherwise __d_eh_notify_callback doesn't bother to call
+ __d_eh_break! So we poke the pid into this symbol
+ ourselves.
+ 0 => success
+ 1 => failure */
+int
+setup_d_pid_in_inferior ()
+{
+ CORE_ADDR anaddr;
+ struct minimal_symbol * msymbol;
+ char buf[4]; /* FIXME 32x64? */
+
+ /* Slam the pid of the process into __d_pid; failing is only a warning! */
+ msymbol = lookup_minimal_symbol ("__d_pid", NULL, symfile_objfile);
+ if (msymbol == NULL)
+ {
+ warning ("Unable to find __d_pid symbol in object file.");
+ warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
+ return 1;
+ }
+
+ anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+ store_unsigned_integer (buf, 4, inferior_pid); /* FIXME 32x64? */
+ if (target_write_memory (anaddr, buf, 4)) /* FIXME 32x64? */
+ {
+ warning ("Unable to write __d_pid");
+ warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
+ return 1;
+ }
+ return 0;
+}
+
+/* Initialize exception catchpoint support by looking for the
+ necessary hooks/callbacks in end.o, etc., and set the hook value to
+ point to the required debug function
+
+ Return 0 => failure
+ 1 => success */
+
+static int
+initialize_hp_cxx_exception_support ()
+{
+ struct symtabs_and_lines sals;
+ struct cleanup * old_chain;
+ struct cleanup * canonical_strings_chain = NULL;
+ int i;
+ char * addr_start;
+ char * addr_end = NULL;
+ char ** canonical = (char **) NULL;
+ int thread = -1;
+ struct symbol * sym = NULL;
+ struct minimal_symbol * msym = NULL;
+ struct objfile * objfile;
+ asection *shlib_info;
+
+ /* Detect and disallow recursion. On HP-UX with aCC, infinite
+ recursion is a possibility because finding the hook for exception
+ callbacks involves making a call in the inferior, which means
+ re-inserting breakpoints which can re-invoke this code */
+
+ static int recurse = 0;
+ if (recurse > 0)
+ {
+ hp_cxx_exception_support_initialized = 0;
+ exception_support_initialized = 0;
+ return 0;
+ }
+
+ hp_cxx_exception_support = 0;
+
+ /* First check if we have seen any HP compiled objects; if not,
+ it is very unlikely that HP's idiosyncratic callback mechanism
+ for exception handling debug support will be available!
+ This will percolate back up to breakpoint.c, where our callers
+ will decide to try the g++ exception-handling support instead. */
+ if (!hp_som_som_object_present)
+ return 0;
+
+ /* We have a SOM executable with SOM debug info; find the hooks */
+
+ /* First look for the notify hook provided by aCC runtime libs */
+ /* If we find this symbol, we conclude that the executable must
+ have HP aCC exception support built in. If this symbol is not
+ found, even though we're a HP SOM-SOM file, we may have been
+ built with some other compiler (not aCC). This results percolates
+ back up to our callers in breakpoint.c which can decide to
+ try the g++ style of exception support instead.
+ If this symbol is found but the other symbols we require are
+ not found, there is something weird going on, and g++ support
+ should *not* be tried as an alternative.
+
+ ASSUMPTION: Only HP aCC code will have __eh_notify_hook defined.
+ ASSUMPTION: HP aCC and g++ modules cannot be linked together. */
+
+ /* libCsup has this hook; it'll usually be non-debuggable */
+ msym = lookup_minimal_symbol (HP_ACC_EH_notify_hook, NULL, NULL);
+ if (msym)
+ {
+ eh_notify_hook_addr = SYMBOL_VALUE_ADDRESS (msym);
+ hp_cxx_exception_support = 1;
+ }
+ else
+ {
+ warning ("Unable to find exception callback hook (%s).", HP_ACC_EH_notify_hook);
+ warning ("Executable may not have been compiled debuggable with HP aCC.");
+ warning ("GDB will be unable to intercept exception events.");
+ eh_notify_hook_addr = 0;
+ hp_cxx_exception_support = 0;
+ return 0;
+ }
+
+#if 0 /* DEBUGGING */
+ printf ("Hook addr found is %lx\n", eh_notify_hook_addr);
+#endif
+
+ /* Next look for the notify callback routine in end.o */
+ /* This is always available in the SOM symbol dictionary if end.o is linked in */
+ msym = lookup_minimal_symbol (HP_ACC_EH_notify_callback, NULL, NULL);
+ if (msym)
+ {
+ eh_notify_callback_addr = SYMBOL_VALUE_ADDRESS (msym);
+ hp_cxx_exception_support = 1;
+ }
+ else
+ {
+ warning ("Unable to find exception callback routine (%s).", HP_ACC_EH_notify_callback);
+ warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
+ warning ("GDB will be unable to intercept exception events.");
+ eh_notify_callback_addr = 0;
+ return 0;
+ }
+
+ /* Check whether the executable is dynamically linked or archive bound */
+ /* With an archive-bound executable we can use the raw addresses we find
+ for the callback function, etc. without modification. For an executable
+ with shared libraries, we have to do more work to find the plabel, which
+ can be the target of a call through $$dyncall from the aCC runtime support
+ library (libCsup) which is linked shared by default by aCC. */
+ /* This test below was copied from somsolib.c/somread.c. It may not be a very
+ reliable one to test that an executable is linked shared. pai/1997-07-18 */
+ shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$");
+ if (shlib_info && (bfd_section_size (symfile_objfile->obfd, shlib_info) != 0))
+ {
+ /* The minsym we have has the local code address, but that's not the
+ plabel that can be used by an inter-load-module call. */
+ /* Find solib handle for main image (which has end.o), and use that
+ and the min sym as arguments to __d_shl_get() (which does the equivalent
+ of shl_findsym()) to find the plabel. */
+
+ args_for_find_stub args;
+ static char message[] = "Error while finding exception callback hook:\n";
+
+ args.solib_handle = som_solib_get_solib_by_pc (eh_notify_callback_addr);
+ args.msym = msym;
+
+ recurse++;
+ eh_notify_callback_addr = catch_errors ((int (*) PARAMS ((char *))) cover_find_stub_with_shl_get,
+ (char *) &args,
+ message, RETURN_MASK_ALL);
+ recurse--;
+
+#if 0 /* DEBUGGING */
+ printf ("found plabel for eh notify callback: %x\n", eh_notify_callback_addr);
+#endif
+
+ exception_catchpoints_are_fragile = 1;
+
+ if (!eh_notify_callback_addr)
+ {
+ /* We can get here either if there is no plabel in the export list
+ for the main image, or if something strange happened (??) */
+ warning ("Couldn't find a plabel (indirect function label) for the exception callback.");
+ warning ("GDB will not be able to intercept exception events.");
+ return 0;
+ }
+ }
+ else
+ exception_catchpoints_are_fragile = 0;
+
+#if 0 /* DEBUGGING */
+ printf ("Cb addr found is %lx\n", eh_notify_callback_addr);
+#endif
+
+ /* Now, look for the breakpointable routine in end.o */
+ /* This should also be available in the SOM symbol dict. if end.o linked in */
+ msym = lookup_minimal_symbol (HP_ACC_EH_break, NULL, NULL);
+ if (msym)
+ {
+ eh_break_addr = SYMBOL_VALUE_ADDRESS (msym);
+ hp_cxx_exception_support = 1;
+ }
+ else
+ {
+ warning ("Unable to find exception callback routine to set breakpoint (%s).", HP_ACC_EH_break);
+ warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
+ warning ("GDB will be unable to intercept exception events.");
+ eh_break_addr = 0;
+ return 0;
+ }
+
+#if 0 /* DEBUGGING */
+ printf ("break addr found is %lx\n", eh_break_addr);
+#endif
+
+ /* Next look for the catch enable flag provided in end.o */
+ sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL,
+ VAR_NAMESPACE, 0, (struct symtab **) NULL);
+ if (sym) /* sometimes present in debug info */
+ {
+ eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (sym);
+ hp_cxx_exception_support = 1;
+ }
+ else /* otherwise look in SOM symbol dict. */
+ {
+ msym = lookup_minimal_symbol (HP_ACC_EH_catch_catch, NULL, NULL);
+ if (msym)
+ {
+ eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (msym);
+ hp_cxx_exception_support = 1;
+ }
+ else
+ {
+ warning ("Unable to enable interception of exception catches.");
+ warning ("Executable may not have been compiled debuggable with HP aCC.");
+ warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
+ return 0;
+ }
+ }
+
+#if 0 /* DEBUGGING */
+ printf ("catch catch addr found is %lx\n", eh_catch_catch_addr);
+#endif
+
+ /* Next look for the catch enable flag provided end.o */
+ sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL,
+ VAR_NAMESPACE, 0, (struct symtab **) NULL);
+ if (sym) /* sometimes present in debug info */
+ {
+ eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (sym);
+ hp_cxx_exception_support = 1;
+ }
+ else /* otherwise look in SOM symbol dict. */
+ {
+ msym = lookup_minimal_symbol (HP_ACC_EH_catch_throw, NULL, NULL);
+ if (msym)
+ {
+ eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (msym);
+ hp_cxx_exception_support = 1;
+ }
+ else
+ {
+ warning ("Unable to enable interception of exception throws.");
+ warning ("Executable may not have been compiled debuggable with HP aCC.");
+ warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
+ return 0;
+ }
+ }
+
+#if 0 /* DEBUGGING */
+ printf ("catch throw addr found is %lx\n", eh_catch_throw_addr);
+#endif
+
+ /* Set the flags */
+ hp_cxx_exception_support = 2; /* everything worked so far */
+ hp_cxx_exception_support_initialized = 1;
+ exception_support_initialized = 1;
+
+ return 1;
+}
+
+/* Target operation for enabling or disabling interception of
+ exception events.
+ KIND is either EX_EVENT_THROW or EX_EVENT_CATCH
+ ENABLE is either 0 (disable) or 1 (enable).
+ Return value is NULL if no support found;
+ -1 if something went wrong,
+ or a pointer to a symtab/line struct if the breakpointable
+ address was found. */
+
+struct symtab_and_line *
+child_enable_exception_callback (kind, enable)
+ enum exception_event_kind kind;
+ int enable;
+{
+ char buf[4];
+
+ if (!exception_support_initialized || !hp_cxx_exception_support_initialized)
+ if (!initialize_hp_cxx_exception_support ())
+ return NULL;
+
+ switch (hp_cxx_exception_support)
+ {
+ case 0:
+ /* Assuming no HP support at all */
+ return NULL;
+ case 1:
+ /* HP support should be present, but something went wrong */
+ return (struct symtab_and_line *) -1; /* yuck! */
+ /* there may be other cases in the future */
+ }
+
+ /* Set the EH hook to point to the callback routine */
+ store_unsigned_integer (buf, 4, enable ? eh_notify_callback_addr : 0); /* FIXME 32x64 problem */
+ /* pai: (temp) FIXME should there be a pack operation first? */
+ if (target_write_memory (eh_notify_hook_addr, buf, 4)) /* FIXME 32x64 problem */
+ {
+ warning ("Could not write to target memory for exception event callback.");
+ warning ("Interception of exception events may not work.");
+ return (struct symtab_and_line *) -1;
+ }
+ if (enable)
+ {
+ /* Ensure that __d_pid is set up correctly -- end.c code checks this. :-(*/
+ if (inferior_pid > 0)
+ {
+ if (setup_d_pid_in_inferior ())
+ return (struct symtab_and_line *) -1;
+ }
+ else
+ {
+ warning ("Internal error: Invalid inferior pid? Cannot intercept exception events."); /* purecov: deadcode */
+ return (struct symtab_and_line *) -1; /* purecov: deadcode */
+ }
+ }
+
+ switch (kind)
+ {
+ case EX_EVENT_THROW:
+ store_unsigned_integer (buf, 4, enable ? 1 : 0);
+ if (target_write_memory (eh_catch_throw_addr, buf, 4)) /* FIXME 32x64? */
+ {
+ warning ("Couldn't enable exception throw interception.");
+ return (struct symtab_and_line *) -1;
+ }
+ break;
+ case EX_EVENT_CATCH:
+ store_unsigned_integer (buf, 4, enable ? 1 : 0);
+ if (target_write_memory (eh_catch_catch_addr, buf, 4)) /* FIXME 32x64? */
+ {
+ warning ("Couldn't enable exception catch interception.");
+ return (struct symtab_and_line *) -1;
+ }
+ break;
+ default: /* purecov: deadcode */
+ error ("Request to enable unknown or unsupported exception event."); /* purecov: deadcode */
+ }
+
+ /* Copy break address into new sal struct, malloc'ing if needed. */
+ if (!break_callback_sal)
+ {
+ break_callback_sal = (struct symtab_and_line *) xmalloc (sizeof (struct symtab_and_line));
+ }
+ INIT_SAL(break_callback_sal);
+ break_callback_sal->symtab = NULL;
+ break_callback_sal->pc = eh_break_addr;
+ break_callback_sal->line = 0;
+ break_callback_sal->end = eh_break_addr;
+
+ return break_callback_sal;
+}
+
+/* Record some information about the current exception event */
+static struct exception_event_record current_ex_event;
+/* Convenience struct */
+static struct symtab_and_line null_symtab_and_line = { NULL, 0, 0, 0 };
+
+/* Report current exception event. Returns a pointer to a record
+ that describes the kind of the event, where it was thrown from,
+ and where it will be caught. More information may be reported
+ in the future */
+struct exception_event_record *
+child_get_current_exception_event ()
+{
+ CORE_ADDR event_kind;
+ CORE_ADDR throw_addr;
+ CORE_ADDR catch_addr;
+ struct frame_info *fi, *curr_frame;
+ int level = 1;
+
+ curr_frame = get_current_frame();
+ if (!curr_frame)
+ return (struct exception_event_record *) NULL;
+
+ /* Go up one frame to __d_eh_notify_callback, because at the
+ point when this code is executed, there's garbage in the
+ arguments of __d_eh_break. */
+ fi = find_relative_frame (curr_frame, &level);
+ if (level != 0)
+ return (struct exception_event_record *) NULL;
+
+ select_frame (fi, -1);
+
+ /* Read in the arguments */
+ /* __d_eh_notify_callback() is called with 3 arguments:
+ 1. event kind catch or throw
+ 2. the target address if known
+ 3. a flag -- not sure what this is. pai/1997-07-17 */
+ event_kind = read_register (ARG0_REGNUM);
+ catch_addr = read_register (ARG1_REGNUM);
+
+ /* Now go down to a user frame */
+ /* For a throw, __d_eh_break is called by
+ __d_eh_notify_callback which is called by
+ __notify_throw which is called
+ from user code.
+ For a catch, __d_eh_break is called by
+ __d_eh_notify_callback which is called by
+ <stackwalking stuff> which is called by
+ __throw__<stuff> or __rethrow_<stuff> which is called
+ from user code. */
+ /* FIXME: Don't use such magic numbers; search for the frames */
+ level = (event_kind == EX_EVENT_THROW) ? 3 : 4;
+ fi = find_relative_frame (curr_frame, &level);
+ if (level != 0)
+ return (struct exception_event_record *) NULL;
+
+ select_frame (fi, -1);
+ throw_addr = fi->pc;
+
+ /* Go back to original (top) frame */
+ select_frame (curr_frame, -1);
+
+ current_ex_event.kind = (enum exception_event_kind) event_kind;
+ current_ex_event.throw_sal = find_pc_line (throw_addr, 1);
+ current_ex_event.catch_sal = find_pc_line (catch_addr, 1);
+
+ return ¤t_ex_event;
+}
+
+
#ifdef MAINTENANCE_CMDS
static void
}
#endif /* MAINTENANCE_CMDS */
+#ifdef PREPARE_TO_PROCEED
+
+/* If the user has switched threads, and there is a breakpoint
+ at the old thread's pc location, then switch to that thread
+ and return TRUE, else return FALSE and don't do a thread
+ switch (or rather, don't seem to have done a thread switch).
+
+ Ptrace-based gdb will always return FALSE to the thread-switch
+ query, and thus also to PREPARE_TO_PROCEED.
+
+ The important thing is whether there is a BPT instruction,
+ not how many user breakpoints there are. So we have to worry
+ about things like these:
+
+ o Non-bp stop -- NO
+
+ o User hits bp, no switch -- NO
+
+ o User hits bp, switches threads -- YES
+
+ o User hits bp, deletes bp, switches threads -- NO
+
+ o User hits bp, deletes one of two or more bps
+ at that PC, user switches threads -- YES
+
+ o Plus, since we're buffering events, the user may have hit a
+ breakpoint, deleted the breakpoint and then gotten another
+ hit on that same breakpoint on another thread which
+ actually hit before the delete. (FIXME in breakpoint.c
+ so that "dead" breakpoints are ignored?) -- NO
+
+ For these reasons, we have to violate information hiding and
+ call "breakpoint_here_p". If core gdb thinks there is a bpt
+ here, that's what counts, as core gdb is the one which is
+ putting the BPT instruction in and taking it out. */
+int
+hppa_prepare_to_proceed()
+{
+ pid_t old_thread;
+ pid_t current_thread;
+
+ old_thread = hppa_switched_threads(inferior_pid);
+ if (old_thread != 0)
+ {
+ /* Switched over from "old_thread". Try to do
+ as little work as possible, 'cause mostly
+ we're going to switch back. */
+ CORE_ADDR new_pc;
+ CORE_ADDR old_pc = read_pc();
+
+ /* Yuk, shouldn't use global to specify current
+ thread. But that's how gdb does it. */
+ current_thread = inferior_pid;
+ inferior_pid = old_thread;
+
+ new_pc = read_pc();
+ if (new_pc != old_pc /* If at same pc, no need */
+ && breakpoint_here_p (new_pc))
+ {
+ /* User hasn't deleted the BP.
+ Return TRUE, finishing switch to "old_thread". */
+ flush_cached_frames ();
+ registers_changed ();
+#if 0
+ printf("---> PREPARE_TO_PROCEED (was %d, now %d)!\n",
+ current_thread, inferior_pid);
+#endif
+
+ return 1;
+ }
+
+ /* Otherwise switch back to the user-chosen thread. */
+ inferior_pid = current_thread;
+ new_pc = read_pc(); /* Re-prime register cache */
+ }
+
+ return 0;
+}
+#endif /* PREPARE_TO_PROCEED */
+
void
_initialize_hppa_tdep ()
{