#include "gdbcore.h"
#include "gdb_wait.h"
#include "regcache.h"
+#include "gdb_string.h"
#include <signal.h>
-extern CORE_ADDR text_end;
+extern int hpux_has_forked (int pid, int *childpid);
+extern int hpux_has_vforked (int pid, int *childpid);
+extern int hpux_has_execd (int pid, char **execd_pathname);
+extern int hpux_has_syscall_event (int pid, enum target_waitkind *kind,
+ int *syscall_id);
+
+static CORE_ADDR text_end;
+
+void
+deprecated_hpux_text_end (struct target_ops *exec_ops)
+{
+ struct section_table *p;
+
+ /* Set text_end to the highest address of the end of any readonly
+ code section. */
+ /* FIXME: The comment above does not match the code. The code
+ checks for sections with are either code *or* readonly. */
+ text_end = (CORE_ADDR) 0;
+ for (p = exec_ops->to_sections; p < exec_ops->to_sections_end; p++)
+ if (bfd_get_section_flags (p->bfd, p->the_bfd_section)
+ & (SEC_CODE | SEC_READONLY))
+ {
+ if (text_end < p->endaddr)
+ text_end = p->endaddr;
+ }
+}
+
static void fetch_register (int);
void
store_inferior_registers (int regno)
{
- register unsigned int regaddr;
+ unsigned int regaddr;
char buf[80];
- register int i;
+ int i;
unsigned int offset = U_REGS_OFFSET;
int scratch;
return;
offset = 0;
- len = REGISTER_RAW_SIZE (regno);
+ len = DEPRECATED_REGISTER_RAW_SIZE (regno);
/* Requests for register zero actually want the save_state's
ss_flags member. As RM says: "Oh, what a hack!" */
len = sizeof (ss.ss_flags);
/* Note that ss_flags is always an int, no matter what
- REGISTER_RAW_SIZE(0) says. Assuming all HP-UX PA machines
- are big-endian, put it at the least significant end of the
- value, and zap the rest of the buffer. */
- offset = REGISTER_RAW_SIZE (0) - len;
+ DEPRECATED_REGISTER_RAW_SIZE(0) says. Assuming all HP-UX
+ PA machines are big-endian, put it at the least
+ significant end of the value, and zap the rest of the
+ buffer. */
+ offset = DEPRECATED_REGISTER_RAW_SIZE (0) - len;
}
/* Floating-point registers come from the ss_fpblock area. */
else if (regno >= FP0_REGNUM)
addr = (HPPAH_OFFSETOF (save_state_t, ss_fpblock)
- + (REGISTER_BYTE (regno) - REGISTER_BYTE (FP0_REGNUM)));
+ + (DEPRECATED_REGISTER_BYTE (regno) - DEPRECATED_REGISTER_BYTE (FP0_REGNUM)));
/* Wide registers come from the ss_wide area.
I think it's more PC to test (ss_flags & SS_WIDEREGS) to select
every register reference. Bleah. */
else if (len == 8)
addr = (HPPAH_OFFSETOF (save_state_t, ss_wide)
- + REGISTER_BYTE (regno));
+ + DEPRECATED_REGISTER_BYTE (regno));
/* Narrow registers come from the ss_narrow area. Note that
ss_narrow starts with gr1, not gr0. */
else if (len == 4)
addr = (HPPAH_OFFSETOF (save_state_t, ss_narrow)
- + (REGISTER_BYTE (regno) - REGISTER_BYTE (1)));
+ + (DEPRECATED_REGISTER_BYTE (regno) - DEPRECATED_REGISTER_BYTE (1)));
else
internal_error (__FILE__, __LINE__,
"hppah-nat.c (write_register): unexpected register size");
{
CORE_ADDR temp;
- temp = *(CORE_ADDR *)®isters[REGISTER_BYTE (regno)];
+ temp = *(CORE_ADDR *)&deprecated_registers[DEPRECATED_REGISTER_BYTE (regno)];
/* Set the priv level (stored in the low two bits of the PC. */
temp |= 0x3;
the high part of IPSW. What will it take for HP to catch a
clue about building sensible interfaces? */
if (regno == IPSW_REGNUM && len == 8)
- *(int *)®isters[REGISTER_BYTE (regno)] = 0;
+ *(int *)&deprecated_registers[DEPRECATED_REGISTER_BYTE (regno)] = 0;
#endif
for (i = 0; i < len; i += sizeof (int))
errno = 0;
call_ptrace (PT_WUREGS, PIDGET (inferior_ptid),
(PTRACE_ARG3_TYPE) addr + i,
- *(int *) ®isters[REGISTER_BYTE (regno) + i]);
+ *(int *) &deprecated_registers[DEPRECATED_REGISTER_BYTE (regno) + i]);
if (errno != 0)
{
/* Warning, not error, in case we are attached; sometimes
static void
fetch_register (int regno)
{
- char buf[MAX_REGISTER_RAW_SIZE];
+ char buf[MAX_REGISTER_SIZE];
unsigned int addr, len, offset;
int i;
offset = 0;
- len = REGISTER_RAW_SIZE (regno);
+ len = DEPRECATED_REGISTER_RAW_SIZE (regno);
/* Requests for register zero actually want the save_state's
ss_flags member. As RM says: "Oh, what a hack!" */
len = sizeof (ss.ss_flags);
/* Note that ss_flags is always an int, no matter what
- REGISTER_RAW_SIZE(0) says. Assuming all HP-UX PA machines
- are big-endian, put it at the least significant end of the
- value, and zap the rest of the buffer. */
- offset = REGISTER_RAW_SIZE (0) - len;
+ DEPRECATED_REGISTER_RAW_SIZE(0) says. Assuming all HP-UX PA
+ machines are big-endian, put it at the least significant end
+ of the value, and zap the rest of the buffer. */
+ offset = DEPRECATED_REGISTER_RAW_SIZE (0) - len;
memset (buf, 0, sizeof (buf));
}
/* Floating-point registers come from the ss_fpblock area. */
else if (regno >= FP0_REGNUM)
addr = (HPPAH_OFFSETOF (save_state_t, ss_fpblock)
- + (REGISTER_BYTE (regno) - REGISTER_BYTE (FP0_REGNUM)));
+ + (DEPRECATED_REGISTER_BYTE (regno) - DEPRECATED_REGISTER_BYTE (FP0_REGNUM)));
/* Wide registers come from the ss_wide area.
I think it's more PC to test (ss_flags & SS_WIDEREGS) to select
every register reference. Bleah. */
else if (len == 8)
addr = (HPPAH_OFFSETOF (save_state_t, ss_wide)
- + REGISTER_BYTE (regno));
+ + DEPRECATED_REGISTER_BYTE (regno));
/* Narrow registers come from the ss_narrow area. Note that
ss_narrow starts with gr1, not gr0. */
else if (len == 4)
addr = (HPPAH_OFFSETOF (save_state_t, ss_narrow)
- + (REGISTER_BYTE (regno) - REGISTER_BYTE (1)));
+ + (DEPRECATED_REGISTER_BYTE (regno) - DEPRECATED_REGISTER_BYTE (1)));
else
internal_error (__FILE__, __LINE__,
struct mem_attrib *mem,
struct target_ops *target)
{
- register int i;
+ int i;
/* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & - (CORE_ADDR)(sizeof (int));
+ CORE_ADDR addr = memaddr & - (CORE_ADDR)(sizeof (int));
/* Round ending address up; get number of longwords that makes. */
- register int count
+ int count
= (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
/* Allocate buffer of that many longwords.
this (in effect) would pile up all those alloca requests until a call
to alloca was made from a point higher than this routine in the
call chain. */
- register int *buffer = (int *) xmalloc (count * sizeof (int));
+ int *buffer = (int *) xmalloc (count * sizeof (int));
if (write)
{
return len;
}
+char *saved_child_execd_pathname = NULL;
+int saved_vfork_pid;
+enum {
+ STATE_NONE,
+ STATE_GOT_CHILD,
+ STATE_GOT_EXEC,
+ STATE_GOT_PARENT,
+ STATE_FAKE_EXEC
+} saved_vfork_state = STATE_NONE;
-void
-child_post_follow_inferior_by_clone (void)
+int
+child_follow_fork (int follow_child)
{
- int status;
+ ptid_t last_ptid;
+ struct target_waitstatus last_status;
+ int has_vforked;
+ int parent_pid, child_pid;
+
+ get_last_target_status (&last_ptid, &last_status);
+ has_vforked = (last_status.kind == TARGET_WAITKIND_VFORKED);
+ parent_pid = ptid_get_pid (last_ptid);
+ child_pid = last_status.value.related_pid;
+
+ /* At this point, if we are vforking, breakpoints were already
+ detached from the child in child_wait; and the child has already
+ called execve(). If we are forking, both the parent and child
+ have breakpoints inserted. */
+
+ if (! follow_child)
+ {
+ if (! has_vforked)
+ {
+ detach_breakpoints (child_pid);
+#ifdef SOLIB_REMOVE_INFERIOR_HOOK
+ SOLIB_REMOVE_INFERIOR_HOOK (child_pid);
+#endif
+ }
- /* This function is used when following both the parent and child
- of a fork. In this case, the debugger clones itself. The original
- debugger follows the parent, the clone follows the child. The
- original detaches from the child, delivering a SIGSTOP to it to
- keep it from running away until the clone can attach itself.
+ /* Detach from the child. */
+ printf_unfiltered ("Detaching after fork from %s\n",
+ target_pid_to_str (pid_to_ptid (child_pid)));
+ hppa_require_detach (child_pid, 0);
+
+ /* The parent and child of a vfork share the same address space.
+ Also, on some targets the order in which vfork and exec events
+ are received for parent in child requires some delicate handling
+ of the events.
+
+ For instance, on ptrace-based HPUX we receive the child's vfork
+ event first, at which time the parent has been suspended by the
+ OS and is essentially untouchable until the child's exit or second
+ exec event arrives. At that time, the parent's vfork event is
+ delivered to us, and that's when we see and decide how to follow
+ the vfork. But to get to that point, we must continue the child
+ until it execs or exits. To do that smoothly, all breakpoints
+ must be removed from the child, in case there are any set between
+ the vfork() and exec() calls. But removing them from the child
+ also removes them from the parent, due to the shared-address-space
+ nature of a vfork'd parent and child. On HPUX, therefore, we must
+ take care to restore the bp's to the parent before we continue it.
+ Else, it's likely that we may not stop in the expected place. (The
+ worst scenario is when the user tries to step over a vfork() call;
+ the step-resume bp must be restored for the step to properly stop
+ in the parent after the call completes!)
+
+ Sequence of events, as reported to gdb from HPUX:
+
+ Parent Child Action for gdb to take
+ -------------------------------------------------------
+ 1 VFORK Continue child
+ 2 EXEC
+ 3 EXEC or EXIT
+ 4 VFORK
+
+ Now that the child has safely exec'd or exited, we must restore
+ the parent's breakpoints before we continue it. Else, we may
+ cause it run past expected stopping points. */
+
+ if (has_vforked)
+ reattach_breakpoints (parent_pid);
+ }
+ else
+ {
+ /* Needed to keep the breakpoint lists in sync. */
+ if (! has_vforked)
+ detach_breakpoints (child_pid);
- At this point, the clone has attached to the child. Because of
- the SIGSTOP, we must now deliver a SIGCONT to the child, or it
- won't behave properly. */
- status = kill (PIDGET (inferior_ptid), SIGCONT);
-}
+ /* Before detaching from the parent, remove all breakpoints from it. */
+ remove_breakpoints ();
+ /* Also reset the solib inferior hook from the parent. */
+#ifdef SOLIB_REMOVE_INFERIOR_HOOK
+ SOLIB_REMOVE_INFERIOR_HOOK (PIDGET (inferior_ptid));
+#endif
-void
-child_post_follow_vfork (int parent_pid, int followed_parent, int child_pid,
- int followed_child)
-{
- /* Are we a debugger that followed the parent of a vfork? If so,
- then recall that the child's vfork event was delivered to us
- first. And, that the parent was suspended by the OS until the
- child's exec or exit events were received.
-
- Upon receiving that child vfork, then, we were forced to remove
- all breakpoints in the child and continue it so that it could
- reach the exec or exit point.
-
- But also recall that the parent and child of a vfork share the
- same address space. Thus, removing bp's in the child also
- removed them from the parent.
-
- Now that the child has safely exec'd or exited, we must restore
- the parent's breakpoints before we continue it. Else, we may
- cause it run past expected stopping points. */
- if (followed_parent)
- {
- reattach_breakpoints (parent_pid);
+ /* Detach from the parent. */
+ target_detach (NULL, 1);
+
+ /* Attach to the child. */
+ printf_unfiltered ("Attaching after fork to %s\n",
+ target_pid_to_str (pid_to_ptid (child_pid)));
+ hppa_require_attach (child_pid);
+ inferior_ptid = pid_to_ptid (child_pid);
+
+ /* If we vforked, then we've also execed by now. The exec will be
+ reported momentarily. follow_exec () will handle breakpoints, so
+ we don't have to.. */
+ if (!has_vforked)
+ follow_inferior_reset_breakpoints ();
}
- /* Are we a debugger that followed the child of a vfork? If so,
- then recall that we don't actually acquire control of the child
- until after it has exec'd or exited. */
- if (followed_child)
+ if (has_vforked)
{
- /* If the child has exited, then there's nothing for us to do.
- In the case of an exec event, we'll let that be handled by
- the normal mechanism that notices and handles exec events, in
- resume(). */
+ /* If we followed the parent, don't try to follow the child's exec. */
+ if (saved_vfork_state != STATE_GOT_PARENT
+ && saved_vfork_state != STATE_FAKE_EXEC)
+ fprintf_unfiltered (gdb_stdout,
+ "hppa: post follow vfork: confused state\n");
+
+ if (! follow_child || saved_vfork_state == STATE_GOT_PARENT)
+ saved_vfork_state = STATE_NONE;
+ else
+ return 1;
}
+ return 0;
}
/* Format a process id, given PID. Be sure to terminate
static char buf[30];
pid_t pid = PIDGET (ptid);
- /* Extra NULLs for paranoia's sake */
- sprintf (buf, "process %d\0\0\0\0", pid);
+ /* Extra NUL for paranoia's sake */
+ sprintf (buf, "process %d%c", pid, '\0');
return buf;
}
pid_t tid = PIDGET (ptid);
/* Extra NULLs for paranoia's sake */
- sprintf (buf, "system thread %d\0\0\0\0", tid);
+ sprintf (buf, "system thread %d%c", tid, '\0');
return buf;
}
+/*## */
+/* Enable HACK for ttrace work. In
+ * infttrace.c/require_notification_of_events,
+ * this is set to 0 so that the loop in child_wait
+ * won't loop.
+ */
+int not_same_real_pid = 1;
+/*## */
+
+/* Wait for child to do something. Return pid of child, or -1 in case
+ of error; store status through argument pointer OURSTATUS. */
+
+ptid_t
+child_wait (ptid_t ptid, struct target_waitstatus *ourstatus)
+{
+ int save_errno;
+ int status;
+ char *execd_pathname = NULL;
+ int exit_status;
+ int related_pid;
+ int syscall_id;
+ enum target_waitkind kind;
+ int pid;
+
+ if (saved_vfork_state == STATE_FAKE_EXEC)
+ {
+ saved_vfork_state = STATE_NONE;
+ ourstatus->kind = TARGET_WAITKIND_EXECD;
+ ourstatus->value.execd_pathname = saved_child_execd_pathname;
+ return inferior_ptid;
+ }
+
+ do
+ {
+ set_sigint_trap (); /* Causes SIGINT to be passed on to the
+ attached process. */
+ set_sigio_trap ();
+
+ pid = ptrace_wait (inferior_ptid, &status);
+
+ save_errno = errno;
+
+ clear_sigio_trap ();
+
+ clear_sigint_trap ();
+
+ if (pid == -1)
+ {
+ if (save_errno == EINTR)
+ continue;
+
+ fprintf_unfiltered (gdb_stderr, "Child process unexpectedly missing: %s.\n",
+ safe_strerror (save_errno));
+
+ /* Claim it exited with unknown signal. */
+ ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+ ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+ return pid_to_ptid (-1);
+ }
+
+ /* Did it exit?
+ */
+ if (target_has_exited (pid, status, &exit_status))
+ {
+ /* ??rehrauer: For now, ignore this. */
+ continue;
+ }
+
+ if (!target_thread_alive (pid_to_ptid (pid)))
+ {
+ ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
+ return pid_to_ptid (pid);
+ }
+
+ if (hpux_has_forked (pid, &related_pid))
+ {
+ /* Ignore the parent's fork event. */
+ if (pid == PIDGET (inferior_ptid))
+ {
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ return inferior_ptid;
+ }
+
+ /* If this is the child's fork event, report that the
+ process has forked. */
+ if (related_pid == PIDGET (inferior_ptid))
+ {
+ ourstatus->kind = TARGET_WAITKIND_FORKED;
+ ourstatus->value.related_pid = pid;
+ return inferior_ptid;
+ }
+ }
+
+ if (hpux_has_vforked (pid, &related_pid))
+ {
+ if (pid == PIDGET (inferior_ptid))
+ {
+ if (saved_vfork_state == STATE_GOT_CHILD)
+ saved_vfork_state = STATE_GOT_PARENT;
+ else if (saved_vfork_state == STATE_GOT_EXEC)
+ saved_vfork_state = STATE_FAKE_EXEC;
+ else
+ fprintf_unfiltered (gdb_stdout,
+ "hppah: parent vfork: confused\n");
+ }
+ else if (related_pid == PIDGET (inferior_ptid))
+ {
+ if (saved_vfork_state == STATE_NONE)
+ saved_vfork_state = STATE_GOT_CHILD;
+ else
+ fprintf_unfiltered (gdb_stdout,
+ "hppah: child vfork: confused\n");
+ }
+ else
+ fprintf_unfiltered (gdb_stdout,
+ "hppah: unknown vfork: confused\n");
+
+ if (saved_vfork_state == STATE_GOT_CHILD)
+ {
+ child_post_startup_inferior (pid_to_ptid (pid));
+ detach_breakpoints (pid);
+#ifdef SOLIB_REMOVE_INFERIOR_HOOK
+ SOLIB_REMOVE_INFERIOR_HOOK (pid);
+#endif
+ child_resume (pid_to_ptid (pid), 0, TARGET_SIGNAL_0);
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ return pid_to_ptid (related_pid);
+ }
+ else if (saved_vfork_state == STATE_FAKE_EXEC)
+ {
+ ourstatus->kind = TARGET_WAITKIND_VFORKED;
+ ourstatus->value.related_pid = related_pid;
+ return pid_to_ptid (pid);
+ }
+ else
+ {
+ /* We saw the parent's vfork, but we haven't seen the exec yet.
+ Wait for it, for simplicity's sake. It should be pending. */
+ saved_vfork_pid = related_pid;
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ return pid_to_ptid (pid);
+ }
+ }
+
+ if (hpux_has_execd (pid, &execd_pathname))
+ {
+ /* On HP-UX, events associated with a vforking inferior come in
+ threes: a vfork event for the child (always first), followed
+ a vfork event for the parent and an exec event for the child.
+ The latter two can come in either order. Make sure we get
+ both. */
+ if (saved_vfork_state != STATE_NONE)
+ {
+ if (saved_vfork_state == STATE_GOT_CHILD)
+ {
+ saved_vfork_state = STATE_GOT_EXEC;
+ /* On HP/UX with ptrace, the child must be resumed before
+ the parent vfork event is delivered. A single-step
+ suffices. */
+ if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK ())
+ target_resume (pid_to_ptid (pid), 1, TARGET_SIGNAL_0);
+ ourstatus->kind = TARGET_WAITKIND_IGNORE;
+ }
+ else if (saved_vfork_state == STATE_GOT_PARENT)
+ {
+ saved_vfork_state = STATE_FAKE_EXEC;
+ ourstatus->kind = TARGET_WAITKIND_VFORKED;
+ ourstatus->value.related_pid = saved_vfork_pid;
+ }
+ else
+ fprintf_unfiltered (gdb_stdout,
+ "hppa: exec: unexpected state\n");
+
+ saved_child_execd_pathname = execd_pathname;
+
+ return inferior_ptid;
+ }
+
+ /* Are we ignoring initial exec events? (This is likely because
+ we're in the process of starting up the inferior, and another
+ (older) mechanism handles those.) If so, we'll report this
+ as a regular stop, not an exec.
+ */
+ if (inferior_ignoring_startup_exec_events)
+ {
+ inferior_ignoring_startup_exec_events--;
+ }
+ else
+ {
+ ourstatus->kind = TARGET_WAITKIND_EXECD;
+ ourstatus->value.execd_pathname = execd_pathname;
+ return pid_to_ptid (pid);
+ }
+ }
+
+ /* All we must do with these is communicate their occurrence
+ to wait_for_inferior...
+ */
+ if (hpux_has_syscall_event (pid, &kind, &syscall_id))
+ {
+ ourstatus->kind = kind;
+ ourstatus->value.syscall_id = syscall_id;
+ return pid_to_ptid (pid);
+ }
+
+ /*## } while (pid != PIDGET (inferior_ptid)); ## *//* Some other child died or stopped */
+/* hack for thread testing */
+ }
+ while ((pid != PIDGET (inferior_ptid)) && not_same_real_pid);
+/*## */
+
+ store_waitstatus (ourstatus, status);
+ return pid_to_ptid (pid);
+}
+
#if !defined (GDB_NATIVE_HPUX_11)
/* The following code is a substitute for the infttrace.c versions used
static startup_semaphore_t startup_semaphore;
-extern int parent_attach_all (int, PTRACE_ARG3_TYPE, int);
-
#ifdef PT_SETTRC
/* This function causes the caller's process to be traced by its
parent. This is intended to be called after GDB forks itself,
}
int
-hppa_remove_hw_watchpoint (int pid, CORE_ADDR start, LONGEST len,
- enum bptype type)
+hppa_remove_hw_watchpoint (int pid, CORE_ADDR start, LONGEST len, int type)
{
error ("Hardware watchpoints not implemented on this platform.");
}
int
-hppa_can_use_hw_watchpoint (enum bptype type, int cnt, enum bptype ot)
+hppa_can_use_hw_watchpoint (int type, int cnt, int ot)
{
return 0;
}
return child_pid_to_str (id);
}
-/* This function has no meaning in a non-threaded world. Thus, we
- return 0 (FALSE). See the use of "hppa_prepare_to_proceed" in
- hppa-tdep.c. */
-
-pid_t
-hppa_switched_threads (pid_t pid)
-{
- return (pid_t) 0;
-}
-
void
hppa_ensure_vforking_parent_remains_stopped (int pid)
{
}
int
-child_has_forked (int pid, int *childpid)
+hpux_has_forked (int pid, int *childpid)
{
/* This request is only available on HPUX 10.0 and later. */
#if !defined(PT_GET_PROCESS_STATE)
}
int
-child_has_vforked (int pid, int *childpid)
+hpux_has_vforked (int pid, int *childpid)
{
/* This request is only available on HPUX 10.0 and later. */
#if !defined(PT_GET_PROCESS_STATE)
#endif
}
-int
-child_can_follow_vfork_prior_to_exec (void)
-{
- /* ptrace doesn't allow this. */
- return 0;
-}
-
int
child_insert_exec_catchpoint (int pid)
{
}
int
-child_has_execd (int pid, char **execd_pathname)
+hpux_has_execd (int pid, char **execd_pathname)
{
/* This request is only available on HPUX 10.0 and later. */
#if !defined(PT_GET_PROCESS_STATE)
}
int
-child_has_syscall_event (int pid, enum target_waitkind *kind, int *syscall_id)
+hpux_has_syscall_event (int pid, enum target_waitkind *kind, int *syscall_id)
{
/* This request is only available on HPUX 10.30 and later, via
the ttrace interface. */
int name_index;
int i;
ptid_t saved_inferior_ptid;
- boolean done;
+ int done;
#ifdef PT_GET_PROCESS_PATHNAME
/* As of 10.x HP-UX, there's an explicit request to get the pathname. */