/* Native-dependent code for GNU/Linux x86.
- Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GDB.
#include "inferior.h"
#include "gdbcore.h"
#include "regcache.h"
+#include "linux-nat.h"
#include "gdb_assert.h"
#include "gdb_string.h"
/* Defines I386_LINUX_ORIG_EAX_REGNUM. */
#include "i386-linux-tdep.h"
+/* Defines ps_err_e, struct ps_prochandle. */
+#include "gdb_proc_service.h"
+
/* Prototypes for local functions. */
static void dummy_sse_values (void);
-
\f
/* The register sets used in GNU/Linux ELF core-dumps are identical to
int i;
for (i = 0; i < I386_NUM_GREGS; i++)
- supply_register (i, (char *) (regp + regmap[i]));
+ supply_register (i, regp + regmap[i]);
if (I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
- supply_register (I386_LINUX_ORIG_EAX_REGNUM, (char *) (regp + ORIG_EAX));
+ supply_register (I386_LINUX_ORIG_EAX_REGNUM, regp + ORIG_EAX);
}
/* Fill register REGNO (if it is a general-purpose register) in
void
supply_fpregset (elf_fpregset_t *fpregsetp)
{
- i387_supply_fsave ((char *) fpregsetp);
+ i387_supply_fsave (current_regcache, -1, fpregsetp);
dummy_sse_values ();
}
void
supply_fpxregset (elf_fpxregset_t *fpxregsetp)
{
- i387_supply_fxsave ((char *) fpxregsetp);
+ i387_supply_fxsave (current_regcache, -1, fpxregsetp);
}
/* Fill register REGNO (if it is a floating-point or SSE register) in
}
\f
+/* Support for debug registers. */
+
static unsigned long
i386_linux_dr_get (int regnum)
{
}
\f
-/* Interpreting register set info found in core files. */
-
-/* Provide registers to GDB from a core file.
-
- (We can't use the generic version of this function in
- core-regset.c, because GNU/Linux has *three* different kinds of
- register set notes. core-regset.c would have to call
- supply_fpxregset, which most platforms don't have.)
-
- CORE_REG_SECT points to an array of bytes, which are the contents
- of a `note' from a core file which BFD thinks might contain
- register contents. CORE_REG_SIZE is its size.
-
- WHICH says which register set corelow suspects this is:
- 0 --- the general-purpose register set, in elf_gregset_t format
- 2 --- the floating-point register set, in elf_fpregset_t format
- 3 --- the extended floating-point register set, in elf_fpxregset_t format
-
- REG_ADDR isn't used on GNU/Linux. */
-
-static void
-fetch_core_registers (char *core_reg_sect, unsigned core_reg_size,
- int which, CORE_ADDR reg_addr)
-{
- elf_gregset_t gregset;
- elf_fpregset_t fpregset;
-
- switch (which)
- {
- case 0:
- if (core_reg_size != sizeof (gregset))
- warning ("Wrong size gregset in core file.");
- else
- {
- memcpy (&gregset, core_reg_sect, sizeof (gregset));
- supply_gregset (&gregset);
- }
- break;
-
- case 2:
- if (core_reg_size != sizeof (fpregset))
- warning ("Wrong size fpregset in core file.");
- else
- {
- memcpy (&fpregset, core_reg_sect, sizeof (fpregset));
- supply_fpregset (&fpregset);
- }
- break;
-
-#ifdef HAVE_PTRACE_GETFPXREGS
- {
- elf_fpxregset_t fpxregset;
-
- case 3:
- if (core_reg_size != sizeof (fpxregset))
- warning ("Wrong size fpxregset in core file.");
- else
- {
- memcpy (&fpxregset, core_reg_sect, sizeof (fpxregset));
- supply_fpxregset (&fpxregset);
- }
- break;
- }
+/* Called by libthread_db. Returns a pointer to the thread local
+ storage (or its descriptor). */
+
+ps_err_e
+ps_get_thread_area (const struct ps_prochandle *ph,
+ lwpid_t lwpid, int idx, void **base)
+{
+ /* NOTE: cagney/2003-08-26: The definition of this buffer is found
+ in the kernel header <asm-i386/ldt.h>. It, after padding, is 4 x
+ 4 byte integers in size: `entry_number', `base_addr', `limit',
+ and a bunch of status bits.
+
+ The values returned by this ptrace call should be part of the
+ regcache buffer, and ps_get_thread_area should channel its
+ request through the regcache. That way remote targets could
+ provide the value using the remote protocol and not this direct
+ call.
+
+ Is this function needed? I'm guessing that the `base' is the
+ address of a a descriptor that libthread_db uses to find the
+ thread local address base that GDB needs. Perhaphs that
+ descriptor is defined by the ABI. Anyway, given that
+ libthread_db calls this function without prompting (gdb
+ requesting tls base) I guess it needs info in there anyway. */
+ unsigned int desc[4];
+ gdb_assert (sizeof (int) == 4);
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
#endif
- default:
- /* We've covered all the kinds of registers we know about here,
- so this must be something we wouldn't know what to do with
- anyway. Just ignore it. */
- break;
- }
+ if (ptrace (PTRACE_GET_THREAD_AREA, lwpid,
+ (void *) idx, (unsigned long) &desc) < 0)
+ return PS_ERR;
+
+ *(int *)base = desc[1];
+ return PS_OK;
}
\f
/* Then check the system call number. */
if (syscall == SYS_sigreturn || syscall == SYS_rt_sigreturn)
{
- CORE_ADDR sp = read_register (SP_REGNUM);
+ CORE_ADDR sp = read_register (I386_ESP_REGNUM);
CORE_ADDR addr = sp;
unsigned long int eflags;
if (ptrace (request, pid, 0, target_signal_to_host (signal)) == -1)
perror_with_name ("ptrace");
}
-\f
-
-/* Register that we are able to handle GNU/Linux ELF core file
- formats. */
-
-static struct core_fns linux_elf_core_fns =
-{
- bfd_target_elf_flavour, /* core_flavour */
- default_check_format, /* check_format */
- default_core_sniffer, /* core_sniffer */
- fetch_core_registers, /* core_read_registers */
- NULL /* next */
-};
void
-_initialize_i386_linux_nat (void)
+child_post_startup_inferior (ptid_t ptid)
{
- add_core_fns (&linux_elf_core_fns);
+ i386_cleanup_dregs ();
+ linux_child_post_startup_inferior (ptid);
}
projects / deliverable / binutils-gdb.git / blobdiff