-/* Native-dependent code for GNU/Linux x86.
+/* Native-dependent code for GNU/Linux i386.
- Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
This file is part of GDB.
/* Defines ps_err_e, struct ps_prochandle. */
#include "gdb_proc_service.h"
-
-/* Prototypes for local functions. */
-static void dummy_sse_values (void);
\f
/* The register sets used in GNU/Linux ELF core-dumps are identical to
gdb_assert (!have_ptrace_getregs);
if (cannot_fetch_register (regno))
{
- supply_register (regno, NULL);
+ regcache_raw_supply (current_regcache, regno, NULL);
return;
}
error ("Couldn't read register %s (#%d): %s.", REGISTER_NAME (regno),
regno, safe_strerror (errno));
- supply_register (regno, &val);
+ regcache_raw_supply (current_regcache, regno, &val);
}
/* Store one register. */
tid = PIDGET (inferior_ptid); /* Not a threaded program. */
errno = 0;
- regcache_collect (regno, &val);
+ regcache_raw_collect (current_regcache, regno, &val);
ptrace (PTRACE_POKEUSER, tid, register_addr (regno, 0), val);
if (errno != 0)
error ("Couldn't write register %s (#%d): %s.", REGISTER_NAME (regno),
int i;
for (i = 0; i < I386_NUM_GREGS; i++)
- supply_register (i, regp + regmap[i]);
+ regcache_raw_supply (current_regcache, i, regp + regmap[i]);
if (I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
- supply_register (I386_LINUX_ORIG_EAX_REGNUM, regp + ORIG_EAX);
+ regcache_raw_supply (current_regcache, I386_LINUX_ORIG_EAX_REGNUM,
+ regp + ORIG_EAX);
}
/* Fill register REGNO (if it is a general-purpose register) in
for (i = 0; i < I386_NUM_GREGS; i++)
if (regno == -1 || regno == i)
- regcache_collect (i, regp + regmap[i]);
+ regcache_raw_collect (current_regcache, i, regp + regmap[i]);
if ((regno == -1 || regno == I386_LINUX_ORIG_EAX_REGNUM)
&& I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
- regcache_collect (I386_LINUX_ORIG_EAX_REGNUM, regp + ORIG_EAX);
+ regcache_raw_collect (current_regcache, I386_LINUX_ORIG_EAX_REGNUM,
+ regp + ORIG_EAX);
}
#ifdef HAVE_PTRACE_GETREGS
supply_fpregset (elf_fpregset_t *fpregsetp)
{
i387_supply_fsave (current_regcache, -1, fpregsetp);
- dummy_sse_values ();
}
/* Fill register REGNO (if it is a floating-point register) in
return 1;
}
-/* Fill the XMM registers in the register array with dummy values. For
- cases where we don't have access to the XMM registers. I think
- this is cleaner than printing a warning. For a cleaner solution,
- we should gdbarchify the i386 family. */
-
-static void
-dummy_sse_values (void)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- /* C doesn't have a syntax for NaN's, so write it out as an array of
- longs. */
- static long dummy[4] = { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff };
- static long mxcsr = 0x1f80;
- int reg;
-
- for (reg = 0; reg < tdep->num_xmm_regs; reg++)
- supply_register (XMM0_REGNUM + reg, (char *) dummy);
- if (tdep->num_xmm_regs > 0)
- supply_register (MXCSR_REGNUM, (char *) &mxcsr);
-}
-
#else
static int fetch_fpxregs (int tid) { return 0; }
static int store_fpxregs (int tid, int regno) { return 0; }
-static void dummy_sse_values (void) {}
#endif /* HAVE_PTRACE_GETFPXREGS */
\f
}
\f
+/* Support for debug registers. */
+
static unsigned long
i386_linux_dr_get (int regnum)
{
/* FIXME: kettenis/2001-03-27: Calling perror_with_name if the
ptrace call fails breaks debugging remote targets. The correct
way to fix this is to add the hardware breakpoint and watchpoint
- stuff to the target vectore. For now, just return zero if the
+ stuff to the target vector. For now, just return zero if the
ptrace call fails. */
errno = 0;
value = ptrace (PTRACE_PEEKUSER, tid,
Is this function needed? I'm guessing that the `base' is the
address of a a descriptor that libthread_db uses to find the
- thread local address base that GDB needs. Perhaphs that
+ thread local address base that GDB needs. Perhaps that
descriptor is defined by the ABI. Anyway, given that
libthread_db calls this function without prompting (gdb
requesting tls base) I guess it needs info in there anyway. */
}
\f
-/* Interpreting register set info found in core files. */
-
-/* Provide registers to GDB from a core file.
-
- (We can't use the generic version of this function in
- core-regset.c, because GNU/Linux has *three* different kinds of
- register set notes. core-regset.c would have to call
- supply_fpxregset, which most platforms don't have.)
-
- CORE_REG_SECT points to an array of bytes, which are the contents
- of a `note' from a core file which BFD thinks might contain
- register contents. CORE_REG_SIZE is its size.
-
- WHICH says which register set corelow suspects this is:
- 0 --- the general-purpose register set, in elf_gregset_t format
- 2 --- the floating-point register set, in elf_fpregset_t format
- 3 --- the extended floating-point register set, in elf_fpxregset_t format
-
- REG_ADDR isn't used on GNU/Linux. */
-
-static void
-fetch_core_registers (char *core_reg_sect, unsigned core_reg_size,
- int which, CORE_ADDR reg_addr)
-{
- elf_gregset_t gregset;
- elf_fpregset_t fpregset;
-
- switch (which)
- {
- case 0:
- if (core_reg_size != sizeof (gregset))
- warning ("Wrong size gregset in core file.");
- else
- {
- memcpy (&gregset, core_reg_sect, sizeof (gregset));
- supply_gregset (&gregset);
- }
- break;
-
- case 2:
- if (core_reg_size != sizeof (fpregset))
- warning ("Wrong size fpregset in core file.");
- else
- {
- memcpy (&fpregset, core_reg_sect, sizeof (fpregset));
- supply_fpregset (&fpregset);
- }
- break;
-
-#ifdef HAVE_PTRACE_GETFPXREGS
- {
- elf_fpxregset_t fpxregset;
-
- case 3:
- if (core_reg_size != sizeof (fpxregset))
- warning ("Wrong size fpxregset in core file.");
- else
- {
- memcpy (&fpxregset, core_reg_sect, sizeof (fpxregset));
- supply_fpxregset (&fpxregset);
- }
- break;
- }
-#endif
-
- default:
- /* We've covered all the kinds of registers we know about here,
- so this must be something we wouldn't know what to do with
- anyway. Just ignore it. */
- break;
- }
-}
-\f
-
/* The instruction for a GNU/Linux system call is:
int $0x80
or 0xcd 0x80. */
#define LINUX_SYSCALL_LEN (sizeof linux_syscall)
/* The system call number is stored in the %eax register. */
-#define LINUX_SYSCALL_REGNUM 0 /* %eax */
+#define LINUX_SYSCALL_REGNUM I386_EAX_REGNUM
/* We are specifically interested in the sigreturn and rt_sigreturn
system calls. */
that's about to be restored, and set the trace flag there. */
/* First check if PC is at a system call. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SYSCALL_LEN) == 0
+ if (deprecated_read_memory_nobpt (pc, (char *) buf, LINUX_SYSCALL_LEN) == 0
&& memcmp (buf, linux_syscall, LINUX_SYSCALL_LEN) == 0)
{
int syscall = read_register_pid (LINUX_SYSCALL_REGNUM,
i386_cleanup_dregs ();
linux_child_post_startup_inferior (ptid);
}
-\f
-
-/* Register that we are able to handle GNU/Linux ELF core file
- formats. */
-
-static struct core_fns linux_elf_core_fns =
-{
- bfd_target_elf_flavour, /* core_flavour */
- default_check_format, /* check_format */
- default_core_sniffer, /* core_sniffer */
- fetch_core_registers, /* core_read_registers */
- NULL /* next */
-};
-
-void
-_initialize_i386_linux_nat (void)
-{
- add_core_fns (&linux_elf_core_fns);
-}