-/* Native-dependent code for Linux/x86.
- Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
+/* Native-dependent code for GNU/Linux x86.
+
+ Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "regcache.h"
+#include "gdb_assert.h"
+#include "gdb_string.h"
#include <sys/ptrace.h>
#include <sys/user.h>
#include <sys/procfs.h>
#include <sys/reg.h>
#endif
+#ifdef HAVE_SYS_DEBUGREG_H
+#include <sys/debugreg.h>
+#endif
+
+#ifndef DR_FIRSTADDR
+#define DR_FIRSTADDR 0
+#endif
+
+#ifndef DR_LASTADDR
+#define DR_LASTADDR 3
+#endif
+
+#ifndef DR_STATUS
+#define DR_STATUS 6
+#endif
+
+#ifndef DR_CONTROL
+#define DR_CONTROL 7
+#endif
+
/* Prototypes for supply_gregset etc. */
#include "gregset.h"
/* Prototypes for i387_supply_fsave etc. */
-#include "i387-nat.h"
+#include "i387-tdep.h"
+
+/* Defines for XMM0_REGNUM etc. */
+#include "i386-tdep.h"
+
+/* Defines I386_LINUX_ORIG_EAX_REGNUM. */
+#include "i386-linux-tdep.h"
/* Prototypes for local functions. */
static void dummy_sse_values (void);
-/* On Linux, threads are implemented as pseudo-processes, in which
- case we may be tracing more than one process at a time. In that
- case, inferior_pid will contain the main process ID and the
- individual thread (process) ID mashed together. These macros are
- used to separate them out. These definitions should be overridden
- if thread support is included. */
-
-#if !defined (PIDGET) /* Default definition for PIDGET/TIDGET. */
-#define PIDGET(PID) PID
-#define TIDGET(PID) 0
-#endif
\f
-/* The register sets used in Linux ELF core-dumps are identical to the
- register sets in `struct user' that is used for a.out core-dumps,
- and is also used by `ptrace'. The corresponding types are
- `elf_gregset_t' for the general-purpose registers (with
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets in `struct user' that is used for a.out
+ core-dumps, and is also used by `ptrace'. The corresponding types
+ are `elf_gregset_t' for the general-purpose registers (with
`elf_greg_t' the type of a single GP register) and `elf_fpregset_t'
for the floating-point registers.
/* Which ptrace request retrieves which registers?
These apply to the corresponding SET requests as well. */
#define GETREGS_SUPPLIES(regno) \
- (0 <= (regno) && (regno) <= 15)
+ ((0 <= (regno) && (regno) <= 15) || (regno) == I386_LINUX_ORIG_EAX_REGNUM)
#define GETFPREGS_SUPPLIES(regno) \
(FP0_REGNUM <= (regno) && (regno) <= LAST_FPU_CTRL_REGNUM)
#define GETFPXREGS_SUPPLIES(regno) \
;
\f
+/* Support for the user struct. */
+
+/* Return the address of register REGNUM. BLOCKEND is the value of
+ u.u_ar0, which should point to the registers. */
+
+CORE_ADDR
+register_u_addr (CORE_ADDR blockend, int regnum)
+{
+ return (blockend + 4 * regmap[regnum]);
+}
+
+/* Return the size of the user struct. */
+
+int
+kernel_u_size (void)
+{
+ return (sizeof (struct user));
+}
+\f
+
/* Fetching registers directly from the U area, one at a time. */
/* FIXME: kettenis/2000-03-05: This duplicates code from `inptrace.c'.
#endif
/* Registers we shouldn't try to fetch. */
-#define OLD_CANNOT_FETCH_REGISTER(regno) ((regno) >= NUM_GREGS)
+#define OLD_CANNOT_FETCH_REGISTER(regno) ((regno) >= I386_NUM_GREGS)
/* Fetch one register. */
}
/* Overload thread id onto process id */
- if ((tid = TIDGET (inferior_pid)) == 0)
- tid = inferior_pid; /* no thread id, just use process id */
+ if ((tid = TIDGET (inferior_ptid)) == 0)
+ tid = PIDGET (inferior_ptid); /* no thread id, just use process id */
offset = U_REGS_OFFSET;
}
else
{
- for (regno = 0; regno < ARCH_NUM_REGS; regno++)
+ for (regno = 0; regno < NUM_REGS; regno++)
{
fetch_register (regno);
}
}
/* Registers we shouldn't try to store. */
-#define OLD_CANNOT_STORE_REGISTER(regno) ((regno) >= NUM_GREGS)
+#define OLD_CANNOT_STORE_REGISTER(regno) ((regno) >= I386_NUM_GREGS)
/* Store one register. */
}
/* Overload thread id onto process id */
- if ((tid = TIDGET (inferior_pid)) == 0)
- tid = inferior_pid; /* no thread id, just use process id */
+ if ((tid = TIDGET (inferior_ptid)) == 0)
+ tid = PIDGET (inferior_ptid); /* no thread id, just use process id */
offset = U_REGS_OFFSET;
}
else
{
- for (regno = 0; regno < ARCH_NUM_REGS; regno++)
+ for (regno = 0; regno < NUM_REGS; regno++)
{
store_register (regno);
}
elf_greg_t *regp = (elf_greg_t *) gregsetp;
int i;
- for (i = 0; i < NUM_GREGS; i++)
+ for (i = 0; i < I386_NUM_GREGS; i++)
supply_register (i, (char *) (regp + regmap[i]));
+
+ if (I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
+ supply_register (I386_LINUX_ORIG_EAX_REGNUM, (char *) (regp + ORIG_EAX));
}
/* Fill register REGNO (if it is a general-purpose register) in
elf_greg_t *regp = (elf_greg_t *) gregsetp;
int i;
- for (i = 0; i < NUM_GREGS; i++)
- if ((regno == -1 || regno == i))
- *(regp + regmap[i]) = *(elf_greg_t *) ®isters[REGISTER_BYTE (i)];
+ for (i = 0; i < I386_NUM_GREGS; i++)
+ if (regno == -1 || regno == i)
+ regcache_collect (i, regp + regmap[i]);
+
+ if ((regno == -1 || regno == I386_LINUX_ORIG_EAX_REGNUM)
+ && I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
+ regcache_collect (I386_LINUX_ORIG_EAX_REGNUM, regp + ORIG_EAX);
}
#ifdef HAVE_PTRACE_GETREGS
/* Fill GDB's register array with the floating-point and SSE register
values in *FPXREGSETP. */
-static void
+void
supply_fpxregset (elf_fpxregset_t *fpxregsetp)
{
i387_supply_fxsave ((char *) fpxregsetp);
*FPXREGSETP with the value in GDB's register array. If REGNO is
-1, do this for all registers. */
-static void
+void
fill_fpxregset (elf_fpxregset_t *fpxregsetp, int regno)
{
i387_fill_fxsave ((char *) fpxregsetp, regno);
static void
dummy_sse_values (void)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* C doesn't have a syntax for NaN's, so write it out as an array of
longs. */
static long dummy[4] = { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff };
static long mxcsr = 0x1f80;
int reg;
- for (reg = 0; reg < 8; reg++)
+ for (reg = 0; reg < tdep->num_xmm_regs; reg++)
supply_register (XMM0_REGNUM + reg, (char *) dummy);
- supply_register (MXCSR_REGNUM, (char *) &mxcsr);
+ if (tdep->num_xmm_regs > 0)
+ supply_register (MXCSR_REGNUM, (char *) &mxcsr);
}
#else
return;
}
- /* Linux LWP ID's are process ID's. */
- if ((tid = TIDGET (inferior_pid)) == 0)
- tid = inferior_pid; /* Not a threaded program. */
+ /* GNU/Linux LWP ID's are process ID's. */
+ if ((tid = TIDGET (inferior_ptid)) == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
/* Use the PTRACE_GETFPXREGS request whenever possible, since it
transfers more registers in one system call, and we'll cache the
return;
}
- /* Linux LWP ID's are process ID's. */
- if ((tid = TIDGET (inferior_pid)) == 0)
- tid = inferior_pid; /* Not a threaded program. */
+ /* GNU/Linux LWP ID's are process ID's. */
+ if ((tid = TIDGET (inferior_ptid)) == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
/* Use the PTRACE_SETFPXREGS requests whenever possible, since it
transfers more registers in one system call. But remember that
}
\f
+static unsigned long
+i386_linux_dr_get (int regnum)
+{
+ int tid;
+ unsigned long value;
+
+ /* FIXME: kettenis/2001-01-29: It's not clear what we should do with
+ multi-threaded processes here. For now, pretend there is just
+ one thread. */
+ tid = PIDGET (inferior_ptid);
+
+ /* FIXME: kettenis/2001-03-27: Calling perror_with_name if the
+ ptrace call fails breaks debugging remote targets. The correct
+ way to fix this is to add the hardware breakpoint and watchpoint
+ stuff to the target vectore. For now, just return zero if the
+ ptrace call fails. */
+ errno = 0;
+ value = ptrace (PT_READ_U, tid,
+ offsetof (struct user, u_debugreg[regnum]), 0);
+ if (errno != 0)
+#if 0
+ perror_with_name ("Couldn't read debug register");
+#else
+ return 0;
+#endif
+
+ return value;
+}
+
+static void
+i386_linux_dr_set (int regnum, unsigned long value)
+{
+ int tid;
+
+ /* FIXME: kettenis/2001-01-29: It's not clear what we should do with
+ multi-threaded processes here. For now, pretend there is just
+ one thread. */
+ tid = PIDGET (inferior_ptid);
+
+ errno = 0;
+ ptrace (PT_WRITE_U, tid,
+ offsetof (struct user, u_debugreg[regnum]), value);
+ if (errno != 0)
+ perror_with_name ("Couldn't write debug register");
+}
+
+void
+i386_linux_dr_set_control (unsigned long control)
+{
+ i386_linux_dr_set (DR_CONTROL, control);
+}
+
+void
+i386_linux_dr_set_addr (int regnum, CORE_ADDR addr)
+{
+ gdb_assert (regnum >= 0 && regnum <= DR_LASTADDR - DR_FIRSTADDR);
+
+ i386_linux_dr_set (DR_FIRSTADDR + regnum, addr);
+}
+
+void
+i386_linux_dr_reset_addr (int regnum)
+{
+ gdb_assert (regnum >= 0 && regnum <= DR_LASTADDR - DR_FIRSTADDR);
+
+ i386_linux_dr_set (DR_FIRSTADDR + regnum, 0L);
+}
+
+unsigned long
+i386_linux_dr_get_status (void)
+{
+ return i386_linux_dr_get (DR_STATUS);
+}
+\f
+
/* Interpreting register set info found in core files. */
/* Provide registers to GDB from a core file.
(We can't use the generic version of this function in
- core-regset.c, because Linux has *three* different kinds of
+ core-regset.c, because GNU/Linux has *three* different kinds of
register set notes. core-regset.c would have to call
supply_fpxregset, which most platforms don't have.)
2 --- the floating-point register set, in elf_fpregset_t format
3 --- the extended floating-point register set, in elf_fpxregset_t format
- REG_ADDR isn't used on Linux. */
+ REG_ADDR isn't used on GNU/Linux. */
static void
fetch_core_registers (char *core_reg_sect, unsigned core_reg_size,
}
\f
-/* The instruction for a Linux system call is:
+/* The instruction for a GNU/Linux system call is:
int $0x80
or 0xcd 0x80. */
If SIGNAL is nonzero, give it that signal. */
void
-child_resume (int pid, int step, enum target_signal signal)
+child_resume (ptid_t ptid, int step, enum target_signal signal)
{
+ int pid = PIDGET (ptid);
+
int request = PTRACE_CONT;
if (pid == -1)
/* Resume all threads. */
/* I think this only gets used in the non-threaded case, where "resume
- all threads" and "resume inferior_pid" are the same. */
- pid = inferior_pid;
+ all threads" and "resume inferior_ptid" are the same. */
+ pid = PIDGET (inferior_ptid);
if (step)
{
- CORE_ADDR pc = read_pc_pid (pid);
+ CORE_ADDR pc = read_pc_pid (pid_to_ptid (pid));
unsigned char buf[LINUX_SYSCALL_LEN];
request = PTRACE_SINGLESTEP;
if (read_memory_nobpt (pc, (char *) buf, LINUX_SYSCALL_LEN) == 0
&& memcmp (buf, linux_syscall, LINUX_SYSCALL_LEN) == 0)
{
- int syscall = read_register_pid (LINUX_SYSCALL_REGNUM, pid);
+ int syscall = read_register_pid (LINUX_SYSCALL_REGNUM,
+ pid_to_ptid (pid));
/* Then check the system call number. */
if (syscall == SYS_sigreturn || syscall == SYS_rt_sigreturn)
CORE_ADDR sp = read_register (SP_REGNUM);
CORE_ADDR addr = sp;
unsigned long int eflags;
-
+
if (syscall == SYS_rt_sigreturn)
addr = read_memory_integer (sp + 8, 4) + 20;
}
\f
-/* Register that we are able to handle Linux ELF core file formats. */
+/* Register that we are able to handle GNU/Linux ELF core file
+ formats. */
static struct core_fns linux_elf_core_fns =
{