-/* Native-dependent code for Linux running on i386's, for GDB.
+/* Native-dependent code for GNU/Linux i386.
-This file is part of GDB.
+ Copyright 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is part of GDB.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "inferior.h"
#include "gdbcore.h"
+#include "regcache.h"
+#include "linux-nat.h"
-/* For i386_linux_skip_solib_resolver */
-#include "symtab.h"
-#include "frame.h"
-#include "symfile.h"
-#include "objfiles.h"
-
+#include "gdb_assert.h"
+#include "gdb_string.h"
#include <sys/ptrace.h>
#include <sys/user.h>
#include <sys/procfs.h>
#include <sys/reg.h>
#endif
-/* This is a duplicate of the table in i386-xdep.c. */
+#ifndef ORIG_EAX
+#define ORIG_EAX -1
+#endif
+
+#ifdef HAVE_SYS_DEBUGREG_H
+#include <sys/debugreg.h>
+#endif
+
+#ifndef DR_FIRSTADDR
+#define DR_FIRSTADDR 0
+#endif
+
+#ifndef DR_LASTADDR
+#define DR_LASTADDR 3
+#endif
+
+#ifndef DR_STATUS
+#define DR_STATUS 6
+#endif
+
+#ifndef DR_CONTROL
+#define DR_CONTROL 7
+#endif
+
+/* Prototypes for supply_gregset etc. */
+#include "gregset.h"
+#include "i387-tdep.h"
+#include "i386-tdep.h"
+#include "i386-linux-tdep.h"
+
+/* Defines ps_err_e, struct ps_prochandle. */
+#include "gdb_proc_service.h"
+\f
+
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets in `struct user' that is used for a.out
+ core-dumps, and is also used by `ptrace'. The corresponding types
+ are `elf_gregset_t' for the general-purpose registers (with
+ `elf_greg_t' the type of a single GP register) and `elf_fpregset_t'
+ for the floating-point registers.
+
+ Those types used to be available under the names `gregset_t' and
+ `fpregset_t' too, and this file used those names in the past. But
+ those names are now used for the register sets used in the
+ `mcontext_t' type, and have a different size and layout. */
+
+/* Mapping between the general-purpose registers in `struct user'
+ format and GDB's register array layout. */
static int regmap[] =
{
EAX, ECX, EDX, EBX,
UESP, EBP, ESI, EDI,
EIP, EFL, CS, SS,
DS, ES, FS, GS,
+ -1, -1, -1, -1, /* st0, st1, st2, st3 */
+ -1, -1, -1, -1, /* st4, st5, st6, st7 */
+ -1, -1, -1, -1, /* fctrl, fstat, ftag, fiseg */
+ -1, -1, -1, -1, /* fioff, foseg, fooff, fop */
+ -1, -1, -1, -1, /* xmm0, xmm1, xmm2, xmm3 */
+ -1, -1, -1, -1, /* xmm4, xmm5, xmm6, xmm6 */
+ -1, /* mxcsr */
+ ORIG_EAX
};
+/* Which ptrace request retrieves which registers?
+ These apply to the corresponding SET requests as well. */
-/* FIXME: These routine absolutely depends upon (NUM_REGS - NUM_FREGS)
- being less than or equal to the number of registers that can be stored
- in a gregset_t. Note that with the current scheme there will typically
- be more registers actually stored in a gregset_t that what we know
- about. This is bogus and should be fixed. */
+#define GETREGS_SUPPLIES(regno) \
+ ((0 <= (regno) && (regno) <= 15) || (regno) == I386_LINUX_ORIG_EAX_REGNUM)
-/* Given a pointer to a general register set in /proc format (gregset_t *),
- unpack the register contents and supply them as gdb's idea of the current
- register values. */
+#define GETFPXREGS_SUPPLIES(regno) \
+ (I386_ST0_REGNUM <= (regno) && (regno) < I386_SSE_NUM_REGS)
-void
-supply_gregset (gregsetp)
- gregset_t *gregsetp;
+/* Does the current host support the GETREGS request? */
+int have_ptrace_getregs =
+#ifdef HAVE_PTRACE_GETREGS
+ 1
+#else
+ 0
+#endif
+;
+
+/* Does the current host support the GETFPXREGS request? The header
+ file may or may not define it, and even if it is defined, the
+ kernel will return EIO if it's running on a pre-SSE processor.
+
+ My instinct is to attach this to some architecture- or
+ target-specific data structure, but really, a particular GDB
+ process can only run on top of one kernel at a time. So it's okay
+ for this to be a simple variable. */
+int have_ptrace_getfpxregs =
+#ifdef HAVE_PTRACE_GETFPXREGS
+ 1
+#else
+ 0
+#endif
+;
+\f
+
+/* Support for the user struct. */
+
+/* Return the address of register REGNUM. BLOCKEND is the value of
+ u.u_ar0, which should point to the registers. */
+
+CORE_ADDR
+register_u_addr (CORE_ADDR blockend, int regnum)
{
- register int regi;
- register greg_t *regp = (greg_t *) gregsetp;
+ return (blockend + 4 * regmap[regnum]);
+}
+
+/* Return the size of the user struct. */
- for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
+int
+kernel_u_size (void)
+{
+ return (sizeof (struct user));
+}
+\f
+
+/* Accessing registers through the U area, one at a time. */
+
+/* Fetch one register. */
+
+static void
+fetch_register (int regno)
+{
+ int tid;
+ int val;
+
+ gdb_assert (!have_ptrace_getregs);
+ if (cannot_fetch_register (regno))
{
- supply_register (regi, (char *) (regp + regmap[regi]));
+ regcache_raw_supply (current_regcache, regno, NULL);
+ return;
}
+
+ /* GNU/Linux LWP ID's are process ID's. */
+ tid = TIDGET (inferior_ptid);
+ if (tid == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+
+ errno = 0;
+ val = ptrace (PTRACE_PEEKUSER, tid, register_addr (regno, 0), 0);
+ if (errno != 0)
+ error (_("Couldn't read register %s (#%d): %s."), REGISTER_NAME (regno),
+ regno, safe_strerror (errno));
+
+ regcache_raw_supply (current_regcache, regno, &val);
+}
+
+/* Store one register. */
+
+static void
+store_register (int regno)
+{
+ int tid;
+ int val;
+
+ gdb_assert (!have_ptrace_getregs);
+ if (cannot_store_register (regno))
+ return;
+
+ /* GNU/Linux LWP ID's are process ID's. */
+ tid = TIDGET (inferior_ptid);
+ if (tid == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+
+ errno = 0;
+ regcache_raw_collect (current_regcache, regno, &val);
+ ptrace (PTRACE_POKEUSER, tid, register_addr (regno, 0), val);
+ if (errno != 0)
+ error (_("Couldn't write register %s (#%d): %s."), REGISTER_NAME (regno),
+ regno, safe_strerror (errno));
}
+\f
+
+/* Transfering the general-purpose registers between GDB, inferiors
+ and core files. */
+
+/* Fill GDB's register array with the general-purpose register values
+ in *GREGSETP. */
+
+void
+supply_gregset (elf_gregset_t *gregsetp)
+{
+ elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ int i;
+
+ for (i = 0; i < I386_NUM_GREGS; i++)
+ regcache_raw_supply (current_regcache, i, regp + regmap[i]);
+
+ if (I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
+ regcache_raw_supply (current_regcache, I386_LINUX_ORIG_EAX_REGNUM,
+ regp + ORIG_EAX);
+}
+
+/* Fill register REGNO (if it is a general-purpose register) in
+ *GREGSETPS with the value in GDB's register array. If REGNO is -1,
+ do this for all registers. */
void
-fill_gregset (gregsetp, regno)
- gregset_t *gregsetp;
- int regno;
+fill_gregset (elf_gregset_t *gregsetp, int regno)
{
- int regi;
- register greg_t *regp = (greg_t *) gregsetp;
+ elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ int i;
- for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
+ for (i = 0; i < I386_NUM_GREGS; i++)
+ if (regno == -1 || regno == i)
+ regcache_raw_collect (current_regcache, i, regp + regmap[i]);
+
+ if ((regno == -1 || regno == I386_LINUX_ORIG_EAX_REGNUM)
+ && I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
+ regcache_raw_collect (current_regcache, I386_LINUX_ORIG_EAX_REGNUM,
+ regp + ORIG_EAX);
+}
+
+#ifdef HAVE_PTRACE_GETREGS
+
+/* Fetch all general-purpose registers from process/thread TID and
+ store their values in GDB's register array. */
+
+static void
+fetch_regs (int tid)
+{
+ elf_gregset_t regs;
+
+ if (ptrace (PTRACE_GETREGS, tid, 0, (int) ®s) < 0)
{
- if ((regno == -1) || (regno == regi))
+ if (errno == EIO)
{
- *(regp + regmap[regi]) = *(int *) ®isters[REGISTER_BYTE (regi)];
+ /* The kernel we're running on doesn't support the GETREGS
+ request. Reset `have_ptrace_getregs'. */
+ have_ptrace_getregs = 0;
+ return;
}
+
+ perror_with_name (_("Couldn't get registers"));
}
+
+ supply_gregset (®s);
+}
+
+/* Store all valid general-purpose registers in GDB's register array
+ into the process/thread specified by TID. */
+
+static void
+store_regs (int tid, int regno)
+{
+ elf_gregset_t regs;
+
+ if (ptrace (PTRACE_GETREGS, tid, 0, (int) ®s) < 0)
+ perror_with_name (_("Couldn't get registers"));
+
+ fill_gregset (®s, regno);
+
+ if (ptrace (PTRACE_SETREGS, tid, 0, (int) ®s) < 0)
+ perror_with_name (_("Couldn't write registers"));
}
+#else
+
+static void fetch_regs (int tid) {}
+static void store_regs (int tid, int regno) {}
-/* Given a pointer to a floating point register set in (fpregset_t *)
- format, unpack the register contents and supply them as gdb's
- idea of the current floating point register values. */
+#endif
+\f
+
+/* Transfering floating-point registers between GDB, inferiors and cores. */
+
+/* Fill GDB's register array with the floating-point register values in
+ *FPREGSETP. */
void
-supply_fpregset (fpregsetp)
- fpregset_t *fpregsetp;
+supply_fpregset (elf_fpregset_t *fpregsetp)
{
- register int regi;
- char *from;
- from = (char *) &(fpregsetp->st_space[0]);
- for (regi = FPSTART_REGNUM ; regi <= FPEND_REGNUM ; regi++)
- {
- supply_register(regi, from);
- from += REGISTER_RAW_SIZE(regi);
- }
+ i387_supply_fsave (current_regcache, -1, fpregsetp);
}
-/* Given a pointer to a floating point register set in (fpregset_t *)
- format, update all of the registers from gdb's idea
- of the current floating point register set. */
+/* Fill register REGNO (if it is a floating-point register) in
+ *FPREGSETP with the value in GDB's register array. If REGNO is -1,
+ do this for all registers. */
void
-fill_fpregset (fpregsetp, regno)
- fpregset_t *fpregsetp;
- int regno;
+fill_fpregset (elf_fpregset_t *fpregsetp, int regno)
{
- int regi;
- char *to;
- char *from;
+ i387_fill_fsave ((char *) fpregsetp, regno);
+}
- to = (char *) &(fpregsetp->st_space[0]);
- for (regi = FPSTART_REGNUM ; regi <= FPEND_REGNUM ; regi++)
- {
- from = (char *) ®isters[REGISTER_BYTE (regi)];
- memcpy (to, from, REGISTER_RAW_SIZE (regi));
- to += REGISTER_RAW_SIZE(regi);
- }
+#ifdef HAVE_PTRACE_GETREGS
+
+/* Fetch all floating-point registers from process/thread TID and store
+ thier values in GDB's register array. */
+
+static void
+fetch_fpregs (int tid)
+{
+ elf_fpregset_t fpregs;
+
+ if (ptrace (PTRACE_GETFPREGS, tid, 0, (int) &fpregs) < 0)
+ perror_with_name (_("Couldn't get floating point status"));
+
+ supply_fpregset (&fpregs);
}
-/*
- Get the whole floating point state of the process and
- store the floating point stack into registers[].
- */
+/* Store all valid floating-point registers in GDB's register array
+ into the process/thread specified by TID. */
+
static void
-fetch_fpregs(void)
+store_fpregs (int tid, int regno)
+{
+ elf_fpregset_t fpregs;
+
+ if (ptrace (PTRACE_GETFPREGS, tid, 0, (int) &fpregs) < 0)
+ perror_with_name (_("Couldn't get floating point status"));
+
+ fill_fpregset (&fpregs, regno);
+
+ if (ptrace (PTRACE_SETFPREGS, tid, 0, (int) &fpregs) < 0)
+ perror_with_name (_("Couldn't write floating point status"));
+}
+
+#else
+
+static void fetch_fpregs (int tid) {}
+static void store_fpregs (int tid, int regno) {}
+
+#endif
+\f
+
+/* Transfering floating-point and SSE registers to and from GDB. */
+
+#ifdef HAVE_PTRACE_GETFPXREGS
+
+/* Fill GDB's register array with the floating-point and SSE register
+ values in *FPXREGSETP. */
+
+void
+supply_fpxregset (elf_fpxregset_t *fpxregsetp)
{
- int ret, regno;
- char buf[FPREG_BYTES];
+ i387_supply_fxsave (current_regcache, -1, fpxregsetp);
+}
- ret = ptrace (PTRACE_GETFPREGS, inferior_pid, 0, (int)buf);
- if ( ret < 0 )
+/* Fill register REGNO (if it is a floating-point or SSE register) in
+ *FPXREGSETP with the value in GDB's register array. If REGNO is
+ -1, do this for all registers. */
+
+void
+fill_fpxregset (elf_fpxregset_t *fpxregsetp, int regno)
+{
+ i387_fill_fxsave ((char *) fpxregsetp, regno);
+}
+
+/* Fetch all registers covered by the PTRACE_GETFPXREGS request from
+ process/thread TID and store their values in GDB's register array.
+ Return non-zero if successful, zero otherwise. */
+
+static int
+fetch_fpxregs (int tid)
+{
+ elf_fpxregset_t fpxregs;
+
+ if (! have_ptrace_getfpxregs)
+ return 0;
+
+ if (ptrace (PTRACE_GETFPXREGS, tid, 0, (int) &fpxregs) < 0)
{
- warning ("Couldn't get floating point status");
- return;
+ if (errno == EIO)
+ {
+ have_ptrace_getfpxregs = 0;
+ return 0;
+ }
+
+ perror_with_name (_("Couldn't read floating-point and SSE registers"));
}
- for ( regno = 0; regno < NUM_FREGS; regno++ )
+ supply_fpxregset (&fpxregs);
+ return 1;
+}
+
+/* Store all valid registers in GDB's register array covered by the
+ PTRACE_SETFPXREGS request into the process/thread specified by TID.
+ Return non-zero if successful, zero otherwise. */
+
+static int
+store_fpxregs (int tid, int regno)
+{
+ elf_fpxregset_t fpxregs;
+
+ if (! have_ptrace_getfpxregs)
+ return 0;
+
+ if (ptrace (PTRACE_GETFPXREGS, tid, 0, &fpxregs) == -1)
{
- if ( regno < 7 )
- supply_register (NUM_REGS-NUM_FREGS+regno, buf + regno*4);
- else
- supply_register (NUM_REGS-NUM_FREGS+regno,
- buf + FPENV_BYTES + (regno-7)*FPREG_RAW_SIZE);
+ if (errno == EIO)
+ {
+ have_ptrace_getfpxregs = 0;
+ return 0;
+ }
+
+ perror_with_name (_("Couldn't read floating-point and SSE registers"));
}
+ fill_fpxregset (&fpxregs, regno);
+
+ if (ptrace (PTRACE_SETFPXREGS, tid, 0, &fpxregs) == -1)
+ perror_with_name (_("Couldn't write floating-point and SSE registers"));
+
+ return 1;
}
+#else
-/*
- Get the whole floating point state of the process and
- replace the contents from registers[].
- */
-static void
-store_fpregs(void)
+static int fetch_fpxregs (int tid) { return 0; }
+static int store_fpxregs (int tid, int regno) { return 0; }
+
+#endif /* HAVE_PTRACE_GETFPXREGS */
+\f
+
+/* Transferring arbitrary registers between GDB and inferior. */
+
+/* Check if register REGNO in the child process is accessible.
+ If we are accessing registers directly via the U area, only the
+ general-purpose registers are available.
+ All registers should be accessible if we have GETREGS support. */
+
+int
+cannot_fetch_register (int regno)
+{
+ gdb_assert (regno >= 0 && regno < NUM_REGS);
+ return (!have_ptrace_getregs && regmap[regno] == -1);
+}
+
+int
+cannot_store_register (int regno)
+{
+ gdb_assert (regno >= 0 && regno < NUM_REGS);
+ return (!have_ptrace_getregs && regmap[regno] == -1);
+}
+
+/* Fetch register REGNO from the child process. If REGNO is -1, do
+ this for all registers (including the floating point and SSE
+ registers). */
+
+void
+fetch_inferior_registers (int regno)
{
- int ret, regno;
- char buf[FPREG_BYTES];
+ int tid;
- ret = ptrace (PTRACE_GETFPREGS, inferior_pid, 0, (int)buf);
- if ( ret < 0 )
+ /* Use the old method of peeking around in `struct user' if the
+ GETREGS request isn't available. */
+ if (!have_ptrace_getregs)
{
- warning ("Couldn't get floating point status");
+ int i;
+
+ for (i = 0; i < NUM_REGS; i++)
+ if (regno == -1 || regno == i)
+ fetch_register (i);
+
return;
}
- for ( regno = 0; regno < NUM_FREGS; regno++ )
+ /* GNU/Linux LWP ID's are process ID's. */
+ tid = TIDGET (inferior_ptid);
+ if (tid == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+
+ /* Use the PTRACE_GETFPXREGS request whenever possible, since it
+ transfers more registers in one system call, and we'll cache the
+ results. But remember that fetch_fpxregs can fail, and return
+ zero. */
+ if (regno == -1)
{
- if ( register_valid[regno] )
+ fetch_regs (tid);
+
+ /* The call above might reset `have_ptrace_getregs'. */
+ if (!have_ptrace_getregs)
{
- if ( regno < 7 )
- {
- read_register_gen (NUM_REGS-NUM_FREGS+regno,
- buf + regno*4);
- }
- else
- {
- read_register_gen (NUM_REGS-NUM_FREGS+regno,
- buf + FPENV_BYTES + (regno-7)*FPREG_RAW_SIZE);
- }
+ fetch_inferior_registers (regno);
+ return;
}
+
+ if (fetch_fpxregs (tid))
+ return;
+ fetch_fpregs (tid);
+ return;
}
- ret = ptrace (PTRACE_SETFPREGS, inferior_pid, 0, (int)buf);
- if ( ret < 0 )
+ if (GETREGS_SUPPLIES (regno))
{
- warning ("Couldn't write floating point status");
+ fetch_regs (tid);
return;
}
-}
-
-
-/*
- Get state of all non-fp registers of the process and
- store into registers[].
- */
-static void
-fetch_regs(void)
-{
- int ret, regno;
- char buf[17*sizeof(unsigned int)];
-
- ret = ptrace (PTRACE_GETREGS, inferior_pid, 0, (int)buf);
- if ( ret < 0 )
+ if (GETFPXREGS_SUPPLIES (regno))
{
- warning ("Couldn't get registers");
+ if (fetch_fpxregs (tid))
+ return;
+
+ /* Either our processor or our kernel doesn't support the SSE
+ registers, so read the FP registers in the traditional way,
+ and fill the SSE registers with dummy values. It would be
+ more graceful to handle differences in the register set using
+ gdbarch. Until then, this will at least make things work
+ plausibly. */
+ fetch_fpregs (tid);
return;
}
- for ( regno = 0; regno < NUM_REGS-NUM_FREGS; regno++ )
- supply_register (regno, buf + register_addr (regno, U_REGS_OFFSET));
-
+ internal_error (__FILE__, __LINE__,
+ _("Got request for bad register number %d."), regno);
}
-
-/*
- Get the whole non-floating-point register state of the process and
- replace them in the process from registers[].
- */
-static void
-store_regs(void)
+/* Store register REGNO back into the child process. If REGNO is -1,
+ do this for all registers (including the floating point and SSE
+ registers). */
+void
+store_inferior_registers (int regno)
{
- int ret, regno;
- char buf[17*sizeof(unsigned int)];
+ int tid;
- ret = ptrace (PTRACE_GETREGS, inferior_pid, 0, (int)buf);
- if ( ret < 0 )
+ /* Use the old method of poking around in `struct user' if the
+ SETREGS request isn't available. */
+ if (!have_ptrace_getregs)
{
- warning ("Couldn't get registers");
+ int i;
+
+ for (i = 0; i < NUM_REGS; i++)
+ if (regno == -1 || regno == i)
+ store_register (i);
+
return;
}
- for ( regno = 0; regno < NUM_REGS-NUM_FREGS; regno++ )
+ /* GNU/Linux LWP ID's are process ID's. */
+ tid = TIDGET (inferior_ptid);
+ if (tid == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+
+ /* Use the PTRACE_SETFPXREGS requests whenever possible, since it
+ transfers more registers in one system call. But remember that
+ store_fpxregs can fail, and return zero. */
+ if (regno == -1)
{
- if ( register_valid[regno] )
- read_register_gen (regno, buf + register_addr (regno, U_REGS_OFFSET));
+ store_regs (tid, regno);
+ if (store_fpxregs (tid, regno))
+ return;
+ store_fpregs (tid, regno);
+ return;
}
- ret = ptrace (PTRACE_SETREGS, inferior_pid, 0, (int)buf);
+ if (GETREGS_SUPPLIES (regno))
+ {
+ store_regs (tid, regno);
+ return;
+ }
- if ( ret < 0 )
+ if (GETFPXREGS_SUPPLIES (regno))
{
- warning ("Couldn't write floating point status");
+ if (store_fpxregs (tid, regno))
+ return;
+
+ /* Either our processor or our kernel doesn't support the SSE
+ registers, so just write the FP registers in the traditional
+ way. */
+ store_fpregs (tid, regno);
return;
}
+ internal_error (__FILE__, __LINE__,
+ _("Got request to store bad register number %d."), regno);
}
+\f
+/* Support for debug registers. */
-/* Fetch registers from the child process.
- Fetch all if regno == -1, otherwise fetch all ordinary
- registers or all floating point registers depending
- upon the value of regno. */
-
-void
-fetch_inferior_registers (regno)
- int regno;
+static unsigned long
+i386_linux_dr_get (int regnum)
{
- if ( (regno < NUM_REGS - NUM_FREGS) || (regno == -1) )
- fetch_regs();
+ int tid;
+ unsigned long value;
+
+ /* FIXME: kettenis/2001-01-29: It's not clear what we should do with
+ multi-threaded processes here. For now, pretend there is just
+ one thread. */
+ tid = PIDGET (inferior_ptid);
+
+ /* FIXME: kettenis/2001-03-27: Calling perror_with_name if the
+ ptrace call fails breaks debugging remote targets. The correct
+ way to fix this is to add the hardware breakpoint and watchpoint
+ stuff to the target vector. For now, just return zero if the
+ ptrace call fails. */
+ errno = 0;
+ value = ptrace (PTRACE_PEEKUSER, tid,
+ offsetof (struct user, u_debugreg[regnum]), 0);
+ if (errno != 0)
+#if 0
+ perror_with_name (_("Couldn't read debug register"));
+#else
+ return 0;
+#endif
- if ( (regno >= NUM_REGS - NUM_FREGS) || (regno == -1) )
- fetch_fpregs();
+ return value;
}
+static void
+i386_linux_dr_set (int regnum, unsigned long value)
+{
+ int tid;
+
+ /* FIXME: kettenis/2001-01-29: It's not clear what we should do with
+ multi-threaded processes here. For now, pretend there is just
+ one thread. */
+ tid = PIDGET (inferior_ptid);
+
+ errno = 0;
+ ptrace (PTRACE_POKEUSER, tid,
+ offsetof (struct user, u_debugreg[regnum]), value);
+ if (errno != 0)
+ perror_with_name (_("Couldn't write debug register"));
+}
-/* Store our register values back into the inferior.
- If REGNO is -1, do this for all registers.
- Otherwise, REGNO specifies which register, which
- then determines whether we store all ordinary
- registers or all of the floating point registers. */
+void
+i386_linux_dr_set_control (unsigned long control)
+{
+ i386_linux_dr_set (DR_CONTROL, control);
+}
void
-store_inferior_registers (regno)
- int regno;
+i386_linux_dr_set_addr (int regnum, CORE_ADDR addr)
{
- if ( (regno < NUM_REGS - NUM_FREGS) || (regno == -1) )
- store_regs();
+ gdb_assert (regnum >= 0 && regnum <= DR_LASTADDR - DR_FIRSTADDR);
- if ( (regno >= NUM_REGS - NUM_FREGS) || (regno == -1) )
- store_fpregs();
+ i386_linux_dr_set (DR_FIRSTADDR + regnum, addr);
}
+void
+i386_linux_dr_reset_addr (int regnum)
+{
+ gdb_assert (regnum >= 0 && regnum <= DR_LASTADDR - DR_FIRSTADDR);
-/* Find the minimal symbol named NAME, and return both the minsym
- struct and its objfile. This probably ought to be in minsym.c, but
- everything there is trying to deal with things like C++ and
- SOFUN_ADDRESS_MAYBE_TURQUOISE, ... Since this is so simple, it may
- be considered too special-purpose for general consumption. */
+ i386_linux_dr_set (DR_FIRSTADDR + regnum, 0L);
+}
-static struct minimal_symbol *
-find_minsym_and_objfile (char *name, struct objfile **objfile_p)
+unsigned long
+i386_linux_dr_get_status (void)
{
- struct objfile *objfile;
+ return i386_linux_dr_get (DR_STATUS);
+}
+\f
- ALL_OBJFILES (objfile)
- {
- struct minimal_symbol *msym;
+/* Called by libthread_db. Returns a pointer to the thread local
+ storage (or its descriptor). */
- ALL_OBJFILE_MSYMBOLS (objfile, msym)
- {
- if (SYMBOL_NAME (msym)
- && STREQ (SYMBOL_NAME (msym), name))
- {
- *objfile_p = objfile;
- return msym;
- }
- }
- }
+ps_err_e
+ps_get_thread_area (const struct ps_prochandle *ph,
+ lwpid_t lwpid, int idx, void **base)
+{
+ /* NOTE: cagney/2003-08-26: The definition of this buffer is found
+ in the kernel header <asm-i386/ldt.h>. It, after padding, is 4 x
+ 4 byte integers in size: `entry_number', `base_addr', `limit',
+ and a bunch of status bits.
+
+ The values returned by this ptrace call should be part of the
+ regcache buffer, and ps_get_thread_area should channel its
+ request through the regcache. That way remote targets could
+ provide the value using the remote protocol and not this direct
+ call.
+
+ Is this function needed? I'm guessing that the `base' is the
+ address of a a descriptor that libthread_db uses to find the
+ thread local address base that GDB needs. Perhaps that
+ descriptor is defined by the ABI. Anyway, given that
+ libthread_db calls this function without prompting (gdb
+ requesting tls base) I guess it needs info in there anyway. */
+ unsigned int desc[4];
+ gdb_assert (sizeof (int) == 4);
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
+#endif
- return 0;
+ if (ptrace (PTRACE_GET_THREAD_AREA, lwpid,
+ (void *) idx, (unsigned long) &desc) < 0)
+ return PS_ERR;
+
+ *(int *)base = desc[1];
+ return PS_OK;
}
+\f
+/* The instruction for a GNU/Linux system call is:
+ int $0x80
+ or 0xcd 0x80. */
-static CORE_ADDR
-skip_hurd_resolver (CORE_ADDR pc)
-{
- /* The HURD dynamic linker is part of the GNU C library, so many
- GNU/Linux distributions use it. (All ELF versions, as far as I
- know.) An unresolved PLT entry points to "_dl_runtime_resolve",
- which calls "fixup" to patch the PLT, and then passes control to
- the function.
-
- We look for the symbol `_dl_runtime_resolve', and find `fixup' in
- the same objfile. If we are at the entry point of `fixup', then
- we set a breakpoint at the return address (at the top of the
- stack), and continue.
-
- It's kind of gross to do all these checks every time we're
- called, since they don't change once the executable has gotten
- started. But this is only a temporary hack --- upcoming versions
- of Linux will provide a portable, efficient interface for
- debugging programs that use shared libraries. */
+static const unsigned char linux_syscall[] = { 0xcd, 0x80 };
- struct objfile *objfile;
- struct minimal_symbol *resolver
- = find_minsym_and_objfile ("_dl_runtime_resolve", &objfile);
+#define LINUX_SYSCALL_LEN (sizeof linux_syscall)
- if (resolver)
- {
- struct minimal_symbol *fixup
- = lookup_minimal_symbol ("fixup", 0, objfile);
+/* The system call number is stored in the %eax register. */
+#define LINUX_SYSCALL_REGNUM I386_EAX_REGNUM
- if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc)
- return (SAVED_PC_AFTER_CALL (get_current_frame ()));
- }
+/* We are specifically interested in the sigreturn and rt_sigreturn
+ system calls. */
- return 0;
-}
+#ifndef SYS_sigreturn
+#define SYS_sigreturn 0x77
+#endif
+#ifndef SYS_rt_sigreturn
+#define SYS_rt_sigreturn 0xad
+#endif
+/* Offset to saved processor flags, from <asm/sigcontext.h>. */
+#define LINUX_SIGCONTEXT_EFLAGS_OFFSET (64)
-/* See the comments for SKIP_SOLIB_RESOLVER at the top of infrun.c.
- This function:
- 1) decides whether a PLT has sent us into the linker to resolve
- a function reference, and
- 2) if so, tells us where to set a temporary breakpoint that will
- trigger when the dynamic linker is done. */
+/* Resume execution of the inferior process.
+ If STEP is nonzero, single-step it.
+ If SIGNAL is nonzero, give it that signal. */
-CORE_ADDR
-i386_linux_skip_solib_resolver (CORE_ADDR pc)
+void
+child_resume (ptid_t ptid, int step, enum target_signal signal)
{
- CORE_ADDR result;
+ int pid = PIDGET (ptid);
- /* Plug in functions for other kinds of resolvers here. */
- result = skip_hurd_resolver (pc);
- if (result)
- return result;
+ int request = PTRACE_CONT;
- return 0;
+ if (pid == -1)
+ /* Resume all threads. */
+ /* I think this only gets used in the non-threaded case, where "resume
+ all threads" and "resume inferior_ptid" are the same. */
+ pid = PIDGET (inferior_ptid);
+
+ if (step)
+ {
+ CORE_ADDR pc = read_pc_pid (pid_to_ptid (pid));
+ unsigned char buf[LINUX_SYSCALL_LEN];
+
+ request = PTRACE_SINGLESTEP;
+
+ /* Returning from a signal trampoline is done by calling a
+ special system call (sigreturn or rt_sigreturn, see
+ i386-linux-tdep.c for more information). This system call
+ restores the registers that were saved when the signal was
+ raised, including %eflags. That means that single-stepping
+ won't work. Instead, we'll have to modify the signal context
+ that's about to be restored, and set the trace flag there. */
+
+ /* First check if PC is at a system call. */
+ if (deprecated_read_memory_nobpt (pc, (char *) buf, LINUX_SYSCALL_LEN) == 0
+ && memcmp (buf, linux_syscall, LINUX_SYSCALL_LEN) == 0)
+ {
+ int syscall = read_register_pid (LINUX_SYSCALL_REGNUM,
+ pid_to_ptid (pid));
+
+ /* Then check the system call number. */
+ if (syscall == SYS_sigreturn || syscall == SYS_rt_sigreturn)
+ {
+ CORE_ADDR sp = read_register (I386_ESP_REGNUM);
+ CORE_ADDR addr = sp;
+ unsigned long int eflags;
+
+ if (syscall == SYS_rt_sigreturn)
+ addr = read_memory_integer (sp + 8, 4) + 20;
+
+ /* Set the trace flag in the context that's about to be
+ restored. */
+ addr += LINUX_SIGCONTEXT_EFLAGS_OFFSET;
+ read_memory (addr, (char *) &eflags, 4);
+ eflags |= 0x0100;
+ write_memory (addr, (char *) &eflags, 4);
+ }
+ }
+ }
+
+ if (ptrace (request, pid, 0, target_signal_to_host (signal)) == -1)
+ perror_with_name (("ptrace"));
+}
+
+void
+child_post_startup_inferior (ptid_t ptid)
+{
+ i386_cleanup_dregs ();
+ linux_child_post_startup_inferior (ptid);
}