-/* Target-dependent code for GNU/Linux running on i386's, for GDB.
+/* Target-dependent code for GNU/Linux i386.
- Copyright 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 2000-2015 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdbcore.h"
#include "frame.h"
#include "value.h"
#include "regcache.h"
+#include "regset.h"
#include "inferior.h"
-
-/* For i386_linux_skip_solib_resolver. */
+#include "osabi.h"
+#include "reggroups.h"
+#include "dwarf2-frame.h"
+#include "i386-tdep.h"
+#include "i386-linux-tdep.h"
+#include "linux-tdep.h"
+#include "glibc-tdep.h"
+#include "solib-svr4.h"
#include "symtab.h"
-#include "symfile.h"
-#include "objfiles.h"
+#include "arch-utils.h"
+#include "xml-syscall.h"
-#include "solib-svr4.h" /* For struct link_map_offsets. */
+#include "i387-tdep.h"
+#include "x86-xstate.h"
-#include "i386-tdep.h"
-#include "i386-linux-tdep.h"
+/* The syscall's XML filename for i386. */
+#define XML_SYSCALL_FILENAME_I386 "syscalls/i386-linux.xml"
-/* Return the name of register REG. */
+#include "record-full.h"
+#include "linux-record.h"
+#include "features/i386/i386-linux.c"
+#include "features/i386/i386-mmx-linux.c"
+#include "features/i386/i386-mpx-linux.c"
+#include "features/i386/i386-avx-linux.c"
+#include "features/i386/i386-avx512-linux.c"
-static const char *
-i386_linux_register_name (int reg)
+/* Return non-zero, when the register is in the corresponding register
+ group. Put the LINUX_ORIG_EAX register in the system group. */
+static int
+i386_linux_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group)
{
- /* Deal with the extra "orig_eax" pseudo register. */
- if (reg == I386_LINUX_ORIG_EAX_REGNUM)
- return "orig_eax";
-
- return i386_register_name (reg);
+ if (regnum == I386_LINUX_ORIG_EAX_REGNUM)
+ return (group == system_reggroup
+ || group == save_reggroup
+ || group == restore_reggroup);
+ return i386_register_reggroup_p (gdbarch, regnum, group);
}
+
\f
/* Recognizing signal handler frames. */
The instruction sequence for normal signals is
pop %eax
- mov $0x77,%eax
+ mov $0x77, %eax
int $0x80
or 0x58 0xb8 0x77 0x00 0x00 0x00 0xcd 0x80.
Checking for the code sequence should be somewhat reliable, because
the effect is to call the system call sigreturn. This is unlikely
- to occur anywhere other than a signal trampoline.
+ to occur anywhere other than in a signal trampoline.
It kind of sucks that we have to read memory from the process in
order to identify a signal trampoline, but there doesn't seem to be
- any other way. The PC_IN_SIGTRAMP macro in tm-linux.h arranges to
- only call us if no function name could be identified, which should
- be the case since the code is on the stack.
+ any other way. Therefore we only do the memory reads if no
+ function name could be identified, which should be the case since
+ the code is on the stack.
Detection of signal trampolines for handlers that set the
SA_RESTORER flag is in general not possible. Unfortunately this is
to the ones used by the kernel. Therefore, these trampolines are
supported too. */
-#define LINUX_SIGTRAMP_INSN0 (0x58) /* pop %eax */
-#define LINUX_SIGTRAMP_OFFSET0 (0)
-#define LINUX_SIGTRAMP_INSN1 (0xb8) /* mov $NNNN,%eax */
-#define LINUX_SIGTRAMP_OFFSET1 (1)
-#define LINUX_SIGTRAMP_INSN2 (0xcd) /* int */
-#define LINUX_SIGTRAMP_OFFSET2 (6)
+#define LINUX_SIGTRAMP_INSN0 0x58 /* pop %eax */
+#define LINUX_SIGTRAMP_OFFSET0 0
+#define LINUX_SIGTRAMP_INSN1 0xb8 /* mov $NNNN, %eax */
+#define LINUX_SIGTRAMP_OFFSET1 1
+#define LINUX_SIGTRAMP_INSN2 0xcd /* int */
+#define LINUX_SIGTRAMP_OFFSET2 6
-static const unsigned char linux_sigtramp_code[] =
+static const gdb_byte linux_sigtramp_code[] =
{
LINUX_SIGTRAMP_INSN0, /* pop %eax */
- LINUX_SIGTRAMP_INSN1, 0x77, 0x00, 0x00, 0x00, /* mov $0x77,%eax */
+ LINUX_SIGTRAMP_INSN1, 0x77, 0x00, 0x00, 0x00, /* mov $0x77, %eax */
LINUX_SIGTRAMP_INSN2, 0x80 /* int $0x80 */
};
#define LINUX_SIGTRAMP_LEN (sizeof linux_sigtramp_code)
-/* If PC is in a sigtramp routine, return the address of the start of
- the routine. Otherwise, return 0. */
+/* If THIS_FRAME is a sigtramp routine, return the address of the
+ start of the routine. Otherwise, return 0. */
static CORE_ADDR
-i386_linux_sigtramp_start (CORE_ADDR pc)
+i386_linux_sigtramp_start (struct frame_info *this_frame)
{
- unsigned char buf[LINUX_SIGTRAMP_LEN];
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ gdb_byte buf[LINUX_SIGTRAMP_LEN];
/* We only recognize a signal trampoline if PC is at the start of
one of the three instructions. We optimize for finding the PC at
PC is not at the start of the instruction sequence, there will be
a few trailing readable bytes on the stack. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, LINUX_SIGTRAMP_LEN))
return 0;
if (buf[0] != LINUX_SIGTRAMP_INSN0)
pc -= adjust;
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, LINUX_SIGTRAMP_LEN))
return 0;
}
/* This function does the same for RT signals. Here the instruction
sequence is
- mov $0xad,%eax
+ mov $0xad, %eax
int $0x80
or 0xb8 0xad 0x00 0x00 0x00 0xcd 0x80.
The effect is to call the system call rt_sigreturn. */
-#define LINUX_RT_SIGTRAMP_INSN0 (0xb8) /* mov $NNNN,%eax */
-#define LINUX_RT_SIGTRAMP_OFFSET0 (0)
-#define LINUX_RT_SIGTRAMP_INSN1 (0xcd) /* int */
-#define LINUX_RT_SIGTRAMP_OFFSET1 (5)
+#define LINUX_RT_SIGTRAMP_INSN0 0xb8 /* mov $NNNN, %eax */
+#define LINUX_RT_SIGTRAMP_OFFSET0 0
+#define LINUX_RT_SIGTRAMP_INSN1 0xcd /* int */
+#define LINUX_RT_SIGTRAMP_OFFSET1 5
-static const unsigned char linux_rt_sigtramp_code[] =
+static const gdb_byte linux_rt_sigtramp_code[] =
{
- LINUX_RT_SIGTRAMP_INSN0, 0xad, 0x00, 0x00, 0x00, /* mov $0xad,%eax */
+ LINUX_RT_SIGTRAMP_INSN0, 0xad, 0x00, 0x00, 0x00, /* mov $0xad, %eax */
LINUX_RT_SIGTRAMP_INSN1, 0x80 /* int $0x80 */
};
#define LINUX_RT_SIGTRAMP_LEN (sizeof linux_rt_sigtramp_code)
-/* If PC is in a RT sigtramp routine, return the address of the start
- of the routine. Otherwise, return 0. */
+/* If THIS_FRAME is an RT sigtramp routine, return the address of the
+ start of the routine. Otherwise, return 0. */
static CORE_ADDR
-i386_linux_rt_sigtramp_start (CORE_ADDR pc)
+i386_linux_rt_sigtramp_start (struct frame_info *this_frame)
{
- unsigned char buf[LINUX_RT_SIGTRAMP_LEN];
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ gdb_byte buf[LINUX_RT_SIGTRAMP_LEN];
/* We only recognize a signal trampoline if PC is at the start of
one of the two instructions. We optimize for finding the PC at
PC is not at the start of the instruction sequence, there will be
a few trailing readable bytes on the stack. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, LINUX_RT_SIGTRAMP_LEN))
return 0;
if (buf[0] != LINUX_RT_SIGTRAMP_INSN0)
pc -= LINUX_RT_SIGTRAMP_OFFSET1;
- if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (this_frame, pc, buf,
+ LINUX_RT_SIGTRAMP_LEN))
return 0;
}
return pc;
}
-/* Return whether PC is in a GNU/Linux sigtramp routine. */
+/* Return whether THIS_FRAME corresponds to a GNU/Linux sigtramp
+ routine. */
static int
-i386_linux_pc_in_sigtramp (CORE_ADDR pc, char *name)
+i386_linux_sigtramp_p (struct frame_info *this_frame)
{
- if (name)
- return STREQ ("__restore", name) || STREQ ("__restore_rt", name);
-
- return (i386_linux_sigtramp_start (pc) != 0
- || i386_linux_rt_sigtramp_start (pc) != 0);
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ const char *name;
+
+ find_pc_partial_function (pc, &name, NULL, NULL);
+
+ /* If we have NAME, we can optimize the search. The trampolines are
+ named __restore and __restore_rt. However, they aren't dynamically
+ exported from the shared C library, so the trampoline may appear to
+ be part of the preceding function. This should always be sigaction,
+ __sigaction, or __libc_sigaction (all aliases to the same function). */
+ if (name == NULL || strstr (name, "sigaction") != NULL)
+ return (i386_linux_sigtramp_start (this_frame) != 0
+ || i386_linux_rt_sigtramp_start (this_frame) != 0);
+
+ return (strcmp ("__restore", name) == 0
+ || strcmp ("__restore_rt", name) == 0);
}
-/* Assuming FRAME is for a GNU/Linux sigtramp routine, return the
+/* Return one if the PC of THIS_FRAME is in a signal trampoline which
+ may have DWARF-2 CFI. */
+
+static int
+i386_linux_dwarf_signal_frame_p (struct gdbarch *gdbarch,
+ struct frame_info *this_frame)
+{
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ const char *name;
+
+ find_pc_partial_function (pc, &name, NULL, NULL);
+
+ /* If a vsyscall DSO is in use, the signal trampolines may have these
+ names. */
+ if (name && (strcmp (name, "__kernel_sigreturn") == 0
+ || strcmp (name, "__kernel_rt_sigreturn") == 0))
+ return 1;
+
+ return 0;
+}
+
+/* Offset to struct sigcontext in ucontext, from <asm/ucontext.h>. */
+#define I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET 20
+
+/* Assuming THIS_FRAME is a GNU/Linux sigtramp routine, return the
address of the associated sigcontext structure. */
static CORE_ADDR
-i386_linux_sigcontext_addr (struct frame_info *frame)
+i386_linux_sigcontext_addr (struct frame_info *this_frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR pc;
+ CORE_ADDR sp;
+ gdb_byte buf[4];
- pc = i386_linux_sigtramp_start (frame->pc);
+ get_frame_register (this_frame, I386_ESP_REGNUM, buf);
+ sp = extract_unsigned_integer (buf, 4, byte_order);
+
+ pc = i386_linux_sigtramp_start (this_frame);
if (pc)
{
- CORE_ADDR sp;
-
- if (frame->next)
- /* If this isn't the top frame, the next frame must be for the
- signal handler itself. The sigcontext structure lives on
- the stack, right after the signum argument. */
- return frame->next->frame + 12;
-
- /* This is the top frame. We'll have to find the address of the
- sigcontext structure by looking at the stack pointer. Keep
- in mind that the first instruction of the sigtramp code is
- "pop %eax". If the PC is at this instruction, adjust the
- returned value accordingly. */
- sp = read_register (SP_REGNUM);
- if (pc == frame->pc)
+ /* The sigcontext structure lives on the stack, right after
+ the signum argument. We determine the address of the
+ sigcontext structure by looking at the frame's stack
+ pointer. Keep in mind that the first instruction of the
+ sigtramp code is "pop %eax". If the PC is after this
+ instruction, adjust the returned value accordingly. */
+ if (pc == get_frame_pc (this_frame))
return sp + 4;
return sp;
}
- pc = i386_linux_rt_sigtramp_start (frame->pc);
+ pc = i386_linux_rt_sigtramp_start (this_frame);
if (pc)
{
- if (frame->next)
- /* If this isn't the top frame, the next frame must be for the
- signal handler itself. The sigcontext structure is part of
- the user context. A pointer to the user context is passed
- as the third argument to the signal handler. */
- return read_memory_integer (frame->next->frame + 16, 4) + 20;
-
- /* This is the top frame. Again, use the stack pointer to find
- the address of the sigcontext structure. */
- return read_memory_integer (read_register (SP_REGNUM) + 8, 4) + 20;
+ CORE_ADDR ucontext_addr;
+
+ /* The sigcontext structure is part of the user context. A
+ pointer to the user context is passed as the third argument
+ to the signal handler. */
+ read_memory (sp + 8, buf, 4);
+ ucontext_addr = extract_unsigned_integer (buf, 4, byte_order);
+ return ucontext_addr + I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET;
}
- error ("Couldn't recognize signal trampoline.");
+ error (_("Couldn't recognize signal trampoline."));
return 0;
}
/* Set the program counter for process PTID to PC. */
static void
-i386_linux_write_pc (CORE_ADDR pc, ptid_t ptid)
+i386_linux_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
- write_register_pid (PC_REGNUM, pc, ptid);
+ regcache_cooked_write_unsigned (regcache, I386_EIP_REGNUM, pc);
/* We must be careful with modifying the program counter. If we
just interrupted a system call, the kernel might try to restart
when we resume the inferior on return from a function call from
within GDB. In all other cases the system call will not be
restarted. */
- write_register_pid (I386_LINUX_ORIG_EAX_REGNUM, -1, ptid);
+ regcache_cooked_write_unsigned (regcache, I386_LINUX_ORIG_EAX_REGNUM, -1);
+}
+
+/* Record all registers but IP register for process-record. */
+
+static int
+i386_all_but_ip_registers_record (struct regcache *regcache)
+{
+ if (record_full_arch_list_add_reg (regcache, I386_EAX_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_ECX_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_EDX_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_EBX_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_ESP_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_EBP_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_ESI_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_EDI_REGNUM))
+ return -1;
+ if (record_full_arch_list_add_reg (regcache, I386_EFLAGS_REGNUM))
+ return -1;
+
+ return 0;
+}
+
+/* i386_canonicalize_syscall maps from the native i386 Linux set
+ of syscall ids into a canonical set of syscall ids used by
+ process record (a mostly trivial mapping, since the canonical
+ set was originally taken from the i386 set). */
+
+static enum gdb_syscall
+i386_canonicalize_syscall (int syscall)
+{
+ enum { i386_syscall_max = 499 };
+
+ if (syscall <= i386_syscall_max)
+ return (enum gdb_syscall) syscall;
+ else
+ return gdb_sys_no_syscall;
+}
+
+/* Parse the arguments of current system call instruction and record
+ the values of the registers and memory that will be changed into
+ "record_arch_list". This instruction is "int 0x80" (Linux
+ Kernel2.4) or "sysenter" (Linux Kernel 2.6).
+
+ Return -1 if something wrong. */
+
+static struct linux_record_tdep i386_linux_record_tdep;
+
+static int
+i386_linux_intx80_sysenter_syscall_record (struct regcache *regcache)
+{
+ int ret;
+ LONGEST syscall_native;
+ enum gdb_syscall syscall_gdb;
+
+ regcache_raw_read_signed (regcache, I386_EAX_REGNUM, &syscall_native);
+
+ syscall_gdb = i386_canonicalize_syscall (syscall_native);
+
+ if (syscall_gdb < 0)
+ {
+ printf_unfiltered (_("Process record and replay target doesn't "
+ "support syscall number %s\n"),
+ plongest (syscall_native));
+ return -1;
+ }
+
+ if (syscall_gdb == gdb_sys_sigreturn
+ || syscall_gdb == gdb_sys_rt_sigreturn)
+ {
+ if (i386_all_but_ip_registers_record (regcache))
+ return -1;
+ return 0;
+ }
+
+ ret = record_linux_system_call (syscall_gdb, regcache,
+ &i386_linux_record_tdep);
+ if (ret)
+ return ret;
+
+ /* Record the return value of the system call. */
+ if (record_full_arch_list_add_reg (regcache, I386_EAX_REGNUM))
+ return -1;
+
+ return 0;
+}
+
+#define I386_LINUX_xstate 270
+#define I386_LINUX_frame_size 732
+
+static int
+i386_linux_record_signal (struct gdbarch *gdbarch,
+ struct regcache *regcache,
+ enum gdb_signal signal)
+{
+ ULONGEST esp;
+
+ if (i386_all_but_ip_registers_record (regcache))
+ return -1;
+
+ if (record_full_arch_list_add_reg (regcache, I386_EIP_REGNUM))
+ return -1;
+
+ /* Record the change in the stack. */
+ regcache_raw_read_unsigned (regcache, I386_ESP_REGNUM, &esp);
+ /* This is for xstate.
+ sp -= sizeof (struct _fpstate); */
+ esp -= I386_LINUX_xstate;
+ /* This is for frame_size.
+ sp -= sizeof (struct rt_sigframe); */
+ esp -= I386_LINUX_frame_size;
+ if (record_full_arch_list_add_mem (esp,
+ I386_LINUX_xstate + I386_LINUX_frame_size))
+ return -1;
+
+ if (record_full_arch_list_add_end ())
+ return -1;
+
+ return 0;
}
\f
-/* Calling functions in shared libraries. */
-/* Find the minimal symbol named NAME, and return both the minsym
- struct and its objfile. This probably ought to be in minsym.c, but
- everything there is trying to deal with things like C++ and
- SOFUN_ADDRESS_MAYBE_TURQUOISE, ... Since this is so simple, it may
- be considered too special-purpose for general consumption. */
+/* Core of the implementation for gdbarch get_syscall_number. Get pending
+ syscall number from REGCACHE. If there is no pending syscall -1 will be
+ returned. Pending syscall means ptrace has stepped into the syscall but
+ another ptrace call will step out. PC is right after the int $0x80
+ / syscall / sysenter instruction in both cases, PC does not change during
+ the second ptrace step. */
-static struct minimal_symbol *
-find_minsym_and_objfile (char *name, struct objfile **objfile_p)
+static LONGEST
+i386_linux_get_syscall_number_from_regcache (struct regcache *regcache)
{
- struct objfile *objfile;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ /* The content of a register. */
+ gdb_byte buf[4];
+ /* The result. */
+ LONGEST ret;
+
+ /* Getting the system call number from the register.
+ When dealing with x86 architecture, this information
+ is stored at %eax register. */
+ regcache_cooked_read (regcache, I386_LINUX_ORIG_EAX_REGNUM, buf);
+
+ ret = extract_signed_integer (buf, 4, byte_order);
- ALL_OBJFILES (objfile)
+ return ret;
+}
+
+/* Wrapper for i386_linux_get_syscall_number_from_regcache to make it
+ compatible with gdbarch get_syscall_number method prototype. */
+
+static LONGEST
+i386_linux_get_syscall_number (struct gdbarch *gdbarch,
+ ptid_t ptid)
+{
+ struct regcache *regcache = get_thread_regcache (ptid);
+
+ return i386_linux_get_syscall_number_from_regcache (regcache);
+}
+
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets in `struct user' that are used for a.out
+ core-dumps. These are also used by ptrace(2). The corresponding
+ types are `elf_gregset_t' for the general-purpose registers (with
+ `elf_greg_t' the type of a single GP register) and `elf_fpregset_t'
+ for the floating-point registers.
+
+ Those types used to be available under the names `gregset_t' and
+ `fpregset_t' too, and GDB used those names in the past. But those
+ names are now used for the register sets used in the `mcontext_t'
+ type, which have a different size and layout. */
+
+/* Mapping between the general-purpose registers in `struct user'
+ format and GDB's register cache layout. */
+
+/* From <sys/reg.h>. */
+int i386_linux_gregset_reg_offset[] =
+{
+ 6 * 4, /* %eax */
+ 1 * 4, /* %ecx */
+ 2 * 4, /* %edx */
+ 0 * 4, /* %ebx */
+ 15 * 4, /* %esp */
+ 5 * 4, /* %ebp */
+ 3 * 4, /* %esi */
+ 4 * 4, /* %edi */
+ 12 * 4, /* %eip */
+ 14 * 4, /* %eflags */
+ 13 * 4, /* %cs */
+ 16 * 4, /* %ss */
+ 7 * 4, /* %ds */
+ 8 * 4, /* %es */
+ 9 * 4, /* %fs */
+ 10 * 4, /* %gs */
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, /* MPX registers BND0 ... BND3. */
+ -1, -1, /* MPX registers BNDCFGU, BNDSTATUS. */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* k0 ... k7 (AVX512) */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* zmm0 ... zmm7 (AVX512) */
+ 11 * 4, /* "orig_eax" */
+};
+
+/* Mapping between the general-purpose registers in `struct
+ sigcontext' format and GDB's register cache layout. */
+
+/* From <asm/sigcontext.h>. */
+static int i386_linux_sc_reg_offset[] =
+{
+ 11 * 4, /* %eax */
+ 10 * 4, /* %ecx */
+ 9 * 4, /* %edx */
+ 8 * 4, /* %ebx */
+ 7 * 4, /* %esp */
+ 6 * 4, /* %ebp */
+ 5 * 4, /* %esi */
+ 4 * 4, /* %edi */
+ 14 * 4, /* %eip */
+ 16 * 4, /* %eflags */
+ 15 * 4, /* %cs */
+ 18 * 4, /* %ss */
+ 3 * 4, /* %ds */
+ 2 * 4, /* %es */
+ 1 * 4, /* %fs */
+ 0 * 4 /* %gs */
+};
+
+/* Get XSAVE extended state xcr0 from core dump. */
+
+uint64_t
+i386_linux_core_read_xcr0 (bfd *abfd)
+{
+ asection *xstate = bfd_get_section_by_name (abfd, ".reg-xstate");
+ uint64_t xcr0;
+
+ if (xstate)
{
- struct minimal_symbol *msym;
+ size_t size = bfd_section_size (abfd, xstate);
- ALL_OBJFILE_MSYMBOLS (objfile, msym)
+ /* Check extended state size. */
+ if (size < X86_XSTATE_AVX_SIZE)
+ xcr0 = X86_XSTATE_SSE_MASK;
+ else
{
- if (SYMBOL_NAME (msym)
- && STREQ (SYMBOL_NAME (msym), name))
+ char contents[8];
+
+ if (! bfd_get_section_contents (abfd, xstate, contents,
+ I386_LINUX_XSAVE_XCR0_OFFSET,
+ 8))
{
- *objfile_p = objfile;
- return msym;
+ warning (_("Couldn't read `xcr0' bytes from "
+ "`.reg-xstate' section in core file."));
+ return 0;
}
+
+ xcr0 = bfd_get_64 (abfd, contents);
}
}
+ else
+ xcr0 = 0;
- return 0;
+ return xcr0;
}
-static CORE_ADDR
-skip_hurd_resolver (CORE_ADDR pc)
-{
- /* The HURD dynamic linker is part of the GNU C library, so many
- GNU/Linux distributions use it. (All ELF versions, as far as I
- know.) An unresolved PLT entry points to "_dl_runtime_resolve",
- which calls "fixup" to patch the PLT, and then passes control to
- the function.
-
- We look for the symbol `_dl_runtime_resolve', and find `fixup' in
- the same objfile. If we are at the entry point of `fixup', then
- we set a breakpoint at the return address (at the top of the
- stack), and continue.
-
- It's kind of gross to do all these checks every time we're
- called, since they don't change once the executable has gotten
- started. But this is only a temporary hack --- upcoming versions
- of GNU/Linux will provide a portable, efficient interface for
- debugging programs that use shared libraries. */
+/* Get Linux/x86 target description from core dump. */
- struct objfile *objfile;
- struct minimal_symbol *resolver
- = find_minsym_and_objfile ("_dl_runtime_resolve", &objfile);
+static const struct target_desc *
+i386_linux_core_read_description (struct gdbarch *gdbarch,
+ struct target_ops *target,
+ bfd *abfd)
+{
+ /* Linux/i386. */
+ uint64_t xcr0 = i386_linux_core_read_xcr0 (abfd);
- if (resolver)
+ switch ((xcr0 & X86_XSTATE_ALL_MASK))
{
- struct minimal_symbol *fixup
- = lookup_minimal_symbol ("fixup", NULL, objfile);
-
- if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc)
- return (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ case X86_XSTATE_MPX_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
+ return tdesc_i386_avx512_linux;
+ case X86_XSTATE_MPX_MASK:
+ return tdesc_i386_mpx_linux;
+ case X86_XSTATE_AVX_MASK:
+ return tdesc_i386_avx_linux;
+ case X86_XSTATE_SSE_MASK:
+ return tdesc_i386_linux;
+ case X86_XSTATE_X87_MASK:
+ return tdesc_i386_mmx_linux;
+ default:
+ break;
}
- return 0;
-}
+ if (bfd_get_section_by_name (abfd, ".reg-xfp") != NULL)
+ return tdesc_i386_linux;
+ else
+ return tdesc_i386_mmx_linux;
+}
-/* See the comments for SKIP_SOLIB_RESOLVER at the top of infrun.c.
- This function:
- 1) decides whether a PLT has sent us into the linker to resolve
- a function reference, and
- 2) if so, tells us where to set a temporary breakpoint that will
- trigger when the dynamic linker is done. */
+/* Similar to i386_supply_fpregset, but use XSAVE extended state. */
-CORE_ADDR
-i386_linux_skip_solib_resolver (CORE_ADDR pc)
+static void
+i386_linux_supply_xstateregset (const struct regset *regset,
+ struct regcache *regcache, int regnum,
+ const void *xstateregs, size_t len)
{
- CORE_ADDR result;
+ i387_supply_xsave (regcache, regnum, xstateregs);
+}
- /* Plug in functions for other kinds of resolvers here. */
- result = skip_hurd_resolver (pc);
- if (result)
- return result;
+/* Similar to i386_collect_fpregset, but use XSAVE extended state. */
- return 0;
+static void
+i386_linux_collect_xstateregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *xstateregs, size_t len)
+{
+ i387_collect_xsave (regcache, regnum, xstateregs, 1);
}
-/* Fetch (and possibly build) an appropriate link_map_offsets
- structure for native GNU/Linux x86 targets using the struct offsets
- defined in link.h (but without actual reference to that file).
+/* Register set definitions. */
- This makes it possible to access GNU/Linux x86 shared libraries
- from a GDB that was not built on an GNU/Linux x86 host (for cross
- debugging). */
+static const struct regset i386_linux_xstateregset =
+ {
+ NULL,
+ i386_linux_supply_xstateregset,
+ i386_linux_collect_xstateregset
+ };
-static struct link_map_offsets *
-i386_linux_svr4_fetch_link_map_offsets (void)
-{
- static struct link_map_offsets lmo;
- static struct link_map_offsets *lmp = NULL;
+/* Iterate over core file register note sections. */
- if (lmp == NULL)
- {
- lmp = &lmo;
+static void
+i386_linux_iterate_over_regset_sections (struct gdbarch *gdbarch,
+ iterate_over_regset_sections_cb *cb,
+ void *cb_data,
+ const struct regcache *regcache)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- lmo.r_debug_size = 8; /* The actual size is 20 bytes, but
- this is all we need. */
- lmo.r_map_offset = 4;
- lmo.r_map_size = 4;
+ cb (".reg", 68, &i386_gregset, NULL, cb_data);
- lmo.link_map_size = 20; /* The actual size is 552 bytes, but
- this is all we need. */
- lmo.l_addr_offset = 0;
- lmo.l_addr_size = 4;
+ if (tdep->xcr0 & X86_XSTATE_AVX)
+ cb (".reg-xstate", X86_XSTATE_SIZE (tdep->xcr0),
+ &i386_linux_xstateregset, "XSAVE extended state", cb_data);
+ else if (tdep->xcr0 & X86_XSTATE_SSE)
+ cb (".reg-xfp", 512, &i386_fpregset, "extended floating-point",
+ cb_data);
+ else
+ cb (".reg2", 108, &i386_fpregset, NULL, cb_data);
+}
- lmo.l_name_offset = 4;
- lmo.l_name_size = 4;
+/* Linux kernel shows PC value after the 'int $0x80' instruction even if
+ inferior is still inside the syscall. On next PTRACE_SINGLESTEP it will
+ finish the syscall but PC will not change.
+
+ Some vDSOs contain 'int $0x80; ret' and during stepping out of the syscall
+ i386_displaced_step_fixup would keep PC at the displaced pad location.
+ As PC is pointing to the 'ret' instruction before the step
+ i386_displaced_step_fixup would expect inferior has just executed that 'ret'
+ and PC should not be adjusted. In reality it finished syscall instead and
+ PC should get relocated back to its vDSO address. Hide the 'ret'
+ instruction by 'nop' so that i386_displaced_step_fixup is not confused.
+
+ It is not fully correct as the bytes in struct displaced_step_closure will
+ not match the inferior code. But we would need some new flag in
+ displaced_step_closure otherwise to keep the state that syscall is finishing
+ for the later i386_displaced_step_fixup execution as the syscall execution
+ is already no longer detectable there. The new flag field would mean
+ i386-linux-tdep.c needs to wrap all the displacement methods of i386-tdep.c
+ which does not seem worth it. The same effect is achieved by patching that
+ 'nop' instruction there instead. */
+
+static struct displaced_step_closure *
+i386_linux_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
+{
+ struct displaced_step_closure *closure;
+
+ closure = i386_displaced_step_copy_insn (gdbarch, from, to, regs);
- lmo.l_next_offset = 12;
- lmo.l_next_size = 4;
+ if (i386_linux_get_syscall_number_from_regcache (regs) != -1)
+ {
+ /* Since we use simple_displaced_step_copy_insn, our closure is a
+ copy of the instruction. */
+ gdb_byte *insn = (gdb_byte *) closure;
- lmo.l_prev_offset = 16;
- lmo.l_prev_size = 4;
+ /* Fake nop. */
+ insn[0] = 0x90;
}
- return lmp;
+ return closure;
}
-\f
static void
i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ const struct target_desc *tdesc = info.target_desc;
+ struct tdesc_arch_data *tdesc_data
+ = (struct tdesc_arch_data *) info.tdep_info;
+ const struct tdesc_feature *feature;
+ int valid_p;
+
+ gdb_assert (tdesc_data);
+
+ linux_init_abi (info, gdbarch);
/* GNU/Linux uses ELF. */
i386_elf_init_abi (info, gdbarch);
- /* We support the SSE registers on GNU/Linux. */
- tdep->num_xmm_regs = I386_NUM_XREGS - 1;
- /* set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS); */
+ /* Reserve a number for orig_eax. */
+ set_gdbarch_num_regs (gdbarch, I386_LINUX_NUM_REGS);
- /* Since we have the extra "orig_eax" register on GNU/Linux, we have
- to adjust a few things. */
+ if (! tdesc_has_registers (tdesc))
+ tdesc = tdesc_i386_linux;
+ tdep->tdesc = tdesc;
+ feature = tdesc_find_feature (tdesc, "org.gnu.gdb.i386.linux");
+ if (feature == NULL)
+ return;
+
+ valid_p = tdesc_numbered_register (feature, tdesc_data,
+ I386_LINUX_ORIG_EAX_REGNUM,
+ "orig_eax");
+ if (!valid_p)
+ return;
+
+ /* Add the %orig_eax register used for syscall restarting. */
set_gdbarch_write_pc (gdbarch, i386_linux_write_pc);
- set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS + 1);
- set_gdbarch_register_name (gdbarch, i386_linux_register_name);
- set_gdbarch_register_bytes (gdbarch, I386_SSE_SIZEOF_REGS + 4);
- tdep->jb_pc_offset = 20; /* From <bits/setjmp.h>. */
+ tdep->register_reggroup_p = i386_linux_register_reggroup_p;
- tdep->sigcontext_addr = i386_linux_sigcontext_addr;
- tdep->sc_pc_offset = 14 * 4; /* From <asm/sigcontext.h>. */
- tdep->sc_sp_offset = 7 * 4;
+ tdep->gregset_reg_offset = i386_linux_gregset_reg_offset;
+ tdep->gregset_num_regs = ARRAY_SIZE (i386_linux_gregset_reg_offset);
+ tdep->sizeof_gregset = 17 * 4;
- /* When the i386 Linux kernel calls a signal handler, the return
- address points to a bit of code on the stack. This function is
- used to identify this bit of code as a signal trampoline in order
- to support backtracing through calls to signal handlers. */
- set_gdbarch_pc_in_sigtramp (gdbarch, i386_linux_pc_in_sigtramp);
+ tdep->jb_pc_offset = 20; /* From <bits/setjmp.h>. */
- set_solib_svr4_fetch_link_map_offsets (gdbarch,
- i386_linux_svr4_fetch_link_map_offsets);
+ tdep->sigtramp_p = i386_linux_sigtramp_p;
+ tdep->sigcontext_addr = i386_linux_sigcontext_addr;
+ tdep->sc_reg_offset = i386_linux_sc_reg_offset;
+ tdep->sc_num_regs = ARRAY_SIZE (i386_linux_sc_reg_offset);
+
+ tdep->xsave_xcr0_offset = I386_LINUX_XSAVE_XCR0_OFFSET;
+
+ set_gdbarch_process_record (gdbarch, i386_process_record);
+ set_gdbarch_process_record_signal (gdbarch, i386_linux_record_signal);
+
+ /* Initialize the i386_linux_record_tdep. */
+ /* These values are the size of the type that will be used in a system
+ call. They are obtained from Linux Kernel source. */
+ i386_linux_record_tdep.size_pointer
+ = gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
+ i386_linux_record_tdep.size__old_kernel_stat = 32;
+ i386_linux_record_tdep.size_tms = 16;
+ i386_linux_record_tdep.size_loff_t = 8;
+ i386_linux_record_tdep.size_flock = 16;
+ i386_linux_record_tdep.size_oldold_utsname = 45;
+ i386_linux_record_tdep.size_ustat = 20;
+ i386_linux_record_tdep.size_old_sigaction = 16;
+ i386_linux_record_tdep.size_old_sigset_t = 4;
+ i386_linux_record_tdep.size_rlimit = 8;
+ i386_linux_record_tdep.size_rusage = 72;
+ i386_linux_record_tdep.size_timeval = 8;
+ i386_linux_record_tdep.size_timezone = 8;
+ i386_linux_record_tdep.size_old_gid_t = 2;
+ i386_linux_record_tdep.size_old_uid_t = 2;
+ i386_linux_record_tdep.size_fd_set = 128;
+ i386_linux_record_tdep.size_old_dirent = 268;
+ i386_linux_record_tdep.size_statfs = 64;
+ i386_linux_record_tdep.size_statfs64 = 84;
+ i386_linux_record_tdep.size_sockaddr = 16;
+ i386_linux_record_tdep.size_int
+ = gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT;
+ i386_linux_record_tdep.size_long
+ = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
+ i386_linux_record_tdep.size_ulong
+ = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
+ i386_linux_record_tdep.size_msghdr = 28;
+ i386_linux_record_tdep.size_itimerval = 16;
+ i386_linux_record_tdep.size_stat = 88;
+ i386_linux_record_tdep.size_old_utsname = 325;
+ i386_linux_record_tdep.size_sysinfo = 64;
+ i386_linux_record_tdep.size_msqid_ds = 88;
+ i386_linux_record_tdep.size_shmid_ds = 84;
+ i386_linux_record_tdep.size_new_utsname = 390;
+ i386_linux_record_tdep.size_timex = 128;
+ i386_linux_record_tdep.size_mem_dqinfo = 24;
+ i386_linux_record_tdep.size_if_dqblk = 68;
+ i386_linux_record_tdep.size_fs_quota_stat = 68;
+ i386_linux_record_tdep.size_timespec = 8;
+ i386_linux_record_tdep.size_pollfd = 8;
+ i386_linux_record_tdep.size_NFS_FHSIZE = 32;
+ i386_linux_record_tdep.size_knfsd_fh = 132;
+ i386_linux_record_tdep.size_TASK_COMM_LEN = 16;
+ i386_linux_record_tdep.size_sigaction = 20;
+ i386_linux_record_tdep.size_sigset_t = 8;
+ i386_linux_record_tdep.size_siginfo_t = 128;
+ i386_linux_record_tdep.size_cap_user_data_t = 12;
+ i386_linux_record_tdep.size_stack_t = 12;
+ i386_linux_record_tdep.size_off_t = i386_linux_record_tdep.size_long;
+ i386_linux_record_tdep.size_stat64 = 96;
+ i386_linux_record_tdep.size_gid_t = 4;
+ i386_linux_record_tdep.size_uid_t = 4;
+ i386_linux_record_tdep.size_PAGE_SIZE = 4096;
+ i386_linux_record_tdep.size_flock64 = 24;
+ i386_linux_record_tdep.size_user_desc = 16;
+ i386_linux_record_tdep.size_io_event = 32;
+ i386_linux_record_tdep.size_iocb = 64;
+ i386_linux_record_tdep.size_epoll_event = 12;
+ i386_linux_record_tdep.size_itimerspec
+ = i386_linux_record_tdep.size_timespec * 2;
+ i386_linux_record_tdep.size_mq_attr = 32;
+ i386_linux_record_tdep.size_termios = 36;
+ i386_linux_record_tdep.size_termios2 = 44;
+ i386_linux_record_tdep.size_pid_t = 4;
+ i386_linux_record_tdep.size_winsize = 8;
+ i386_linux_record_tdep.size_serial_struct = 60;
+ i386_linux_record_tdep.size_serial_icounter_struct = 80;
+ i386_linux_record_tdep.size_hayes_esp_config = 12;
+ i386_linux_record_tdep.size_size_t = 4;
+ i386_linux_record_tdep.size_iovec = 8;
+ i386_linux_record_tdep.size_time_t = 4;
+
+ /* These values are the second argument of system call "sys_ioctl".
+ They are obtained from Linux Kernel source. */
+ i386_linux_record_tdep.ioctl_TCGETS = 0x5401;
+ i386_linux_record_tdep.ioctl_TCSETS = 0x5402;
+ i386_linux_record_tdep.ioctl_TCSETSW = 0x5403;
+ i386_linux_record_tdep.ioctl_TCSETSF = 0x5404;
+ i386_linux_record_tdep.ioctl_TCGETA = 0x5405;
+ i386_linux_record_tdep.ioctl_TCSETA = 0x5406;
+ i386_linux_record_tdep.ioctl_TCSETAW = 0x5407;
+ i386_linux_record_tdep.ioctl_TCSETAF = 0x5408;
+ i386_linux_record_tdep.ioctl_TCSBRK = 0x5409;
+ i386_linux_record_tdep.ioctl_TCXONC = 0x540A;
+ i386_linux_record_tdep.ioctl_TCFLSH = 0x540B;
+ i386_linux_record_tdep.ioctl_TIOCEXCL = 0x540C;
+ i386_linux_record_tdep.ioctl_TIOCNXCL = 0x540D;
+ i386_linux_record_tdep.ioctl_TIOCSCTTY = 0x540E;
+ i386_linux_record_tdep.ioctl_TIOCGPGRP = 0x540F;
+ i386_linux_record_tdep.ioctl_TIOCSPGRP = 0x5410;
+ i386_linux_record_tdep.ioctl_TIOCOUTQ = 0x5411;
+ i386_linux_record_tdep.ioctl_TIOCSTI = 0x5412;
+ i386_linux_record_tdep.ioctl_TIOCGWINSZ = 0x5413;
+ i386_linux_record_tdep.ioctl_TIOCSWINSZ = 0x5414;
+ i386_linux_record_tdep.ioctl_TIOCMGET = 0x5415;
+ i386_linux_record_tdep.ioctl_TIOCMBIS = 0x5416;
+ i386_linux_record_tdep.ioctl_TIOCMBIC = 0x5417;
+ i386_linux_record_tdep.ioctl_TIOCMSET = 0x5418;
+ i386_linux_record_tdep.ioctl_TIOCGSOFTCAR = 0x5419;
+ i386_linux_record_tdep.ioctl_TIOCSSOFTCAR = 0x541A;
+ i386_linux_record_tdep.ioctl_FIONREAD = 0x541B;
+ i386_linux_record_tdep.ioctl_TIOCINQ = i386_linux_record_tdep.ioctl_FIONREAD;
+ i386_linux_record_tdep.ioctl_TIOCLINUX = 0x541C;
+ i386_linux_record_tdep.ioctl_TIOCCONS = 0x541D;
+ i386_linux_record_tdep.ioctl_TIOCGSERIAL = 0x541E;
+ i386_linux_record_tdep.ioctl_TIOCSSERIAL = 0x541F;
+ i386_linux_record_tdep.ioctl_TIOCPKT = 0x5420;
+ i386_linux_record_tdep.ioctl_FIONBIO = 0x5421;
+ i386_linux_record_tdep.ioctl_TIOCNOTTY = 0x5422;
+ i386_linux_record_tdep.ioctl_TIOCSETD = 0x5423;
+ i386_linux_record_tdep.ioctl_TIOCGETD = 0x5424;
+ i386_linux_record_tdep.ioctl_TCSBRKP = 0x5425;
+ i386_linux_record_tdep.ioctl_TIOCTTYGSTRUCT = 0x5426;
+ i386_linux_record_tdep.ioctl_TIOCSBRK = 0x5427;
+ i386_linux_record_tdep.ioctl_TIOCCBRK = 0x5428;
+ i386_linux_record_tdep.ioctl_TIOCGSID = 0x5429;
+ i386_linux_record_tdep.ioctl_TCGETS2 = 0x802c542a;
+ i386_linux_record_tdep.ioctl_TCSETS2 = 0x402c542b;
+ i386_linux_record_tdep.ioctl_TCSETSW2 = 0x402c542c;
+ i386_linux_record_tdep.ioctl_TCSETSF2 = 0x402c542d;
+ i386_linux_record_tdep.ioctl_TIOCGPTN = 0x80045430;
+ i386_linux_record_tdep.ioctl_TIOCSPTLCK = 0x40045431;
+ i386_linux_record_tdep.ioctl_FIONCLEX = 0x5450;
+ i386_linux_record_tdep.ioctl_FIOCLEX = 0x5451;
+ i386_linux_record_tdep.ioctl_FIOASYNC = 0x5452;
+ i386_linux_record_tdep.ioctl_TIOCSERCONFIG = 0x5453;
+ i386_linux_record_tdep.ioctl_TIOCSERGWILD = 0x5454;
+ i386_linux_record_tdep.ioctl_TIOCSERSWILD = 0x5455;
+ i386_linux_record_tdep.ioctl_TIOCGLCKTRMIOS = 0x5456;
+ i386_linux_record_tdep.ioctl_TIOCSLCKTRMIOS = 0x5457;
+ i386_linux_record_tdep.ioctl_TIOCSERGSTRUCT = 0x5458;
+ i386_linux_record_tdep.ioctl_TIOCSERGETLSR = 0x5459;
+ i386_linux_record_tdep.ioctl_TIOCSERGETMULTI = 0x545A;
+ i386_linux_record_tdep.ioctl_TIOCSERSETMULTI = 0x545B;
+ i386_linux_record_tdep.ioctl_TIOCMIWAIT = 0x545C;
+ i386_linux_record_tdep.ioctl_TIOCGICOUNT = 0x545D;
+ i386_linux_record_tdep.ioctl_TIOCGHAYESESP = 0x545E;
+ i386_linux_record_tdep.ioctl_TIOCSHAYESESP = 0x545F;
+ i386_linux_record_tdep.ioctl_FIOQSIZE = 0x5460;
+
+ /* These values are the second argument of system call "sys_fcntl"
+ and "sys_fcntl64". They are obtained from Linux Kernel source. */
+ i386_linux_record_tdep.fcntl_F_GETLK = 5;
+ i386_linux_record_tdep.fcntl_F_GETLK64 = 12;
+ i386_linux_record_tdep.fcntl_F_SETLK64 = 13;
+ i386_linux_record_tdep.fcntl_F_SETLKW64 = 14;
+
+ i386_linux_record_tdep.arg1 = I386_EBX_REGNUM;
+ i386_linux_record_tdep.arg2 = I386_ECX_REGNUM;
+ i386_linux_record_tdep.arg3 = I386_EDX_REGNUM;
+ i386_linux_record_tdep.arg4 = I386_ESI_REGNUM;
+ i386_linux_record_tdep.arg5 = I386_EDI_REGNUM;
+ i386_linux_record_tdep.arg6 = I386_EBP_REGNUM;
+
+ tdep->i386_intx80_record = i386_linux_intx80_sysenter_syscall_record;
+ tdep->i386_sysenter_record = i386_linux_intx80_sysenter_syscall_record;
+ tdep->i386_syscall_record = i386_linux_intx80_sysenter_syscall_record;
+
+ /* N_FUN symbols in shared libaries have 0 for their values and need
+ to be relocated. */
+ set_gdbarch_sofun_address_maybe_missing (gdbarch, 1);
+
+ /* GNU/Linux uses SVR4-style shared libraries. */
+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, svr4_ilp32_fetch_link_map_offsets);
+
+ /* GNU/Linux uses the dynamic linker included in the GNU C Library. */
+ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);
+
+ dwarf2_frame_set_signal_frame_p (gdbarch, i386_linux_dwarf_signal_frame_p);
+
+ /* Enable TLS support. */
+ set_gdbarch_fetch_tls_load_module_address (gdbarch,
+ svr4_fetch_objfile_link_map);
+
+ /* Core file support. */
+ set_gdbarch_iterate_over_regset_sections
+ (gdbarch, i386_linux_iterate_over_regset_sections);
+ set_gdbarch_core_read_description (gdbarch,
+ i386_linux_core_read_description);
+
+ /* Displaced stepping. */
+ set_gdbarch_displaced_step_copy_insn (gdbarch,
+ i386_linux_displaced_step_copy_insn);
+ set_gdbarch_displaced_step_fixup (gdbarch, i386_displaced_step_fixup);
+ set_gdbarch_displaced_step_free_closure (gdbarch,
+ simple_displaced_step_free_closure);
+ set_gdbarch_displaced_step_location (gdbarch,
+ linux_displaced_step_location);
+
+ /* Functions for 'catch syscall'. */
+ set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_I386);
+ set_gdbarch_get_syscall_number (gdbarch,
+ i386_linux_get_syscall_number);
}
/* Provide a prototype to silence -Wmissing-prototypes. */
void
_initialize_i386_linux_tdep (void)
{
- gdbarch_register_osabi (bfd_arch_i386, GDB_OSABI_LINUX,
+ gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_LINUX,
i386_linux_init_abi);
+
+ /* Initialize the Linux target description. */
+ initialize_tdesc_i386_linux ();
+ initialize_tdesc_i386_mmx_linux ();
+ initialize_tdesc_i386_avx_linux ();
+ initialize_tdesc_i386_mpx_linux ();
+ initialize_tdesc_i386_avx512_linux ();
}