-/* Target-dependent code for Linux running on i386's, for GDB.
- Copyright (C) 2000 Free Software Foundation, Inc.
+/* Target-dependent code for GNU/Linux i386.
+
+ Copyright 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "frame.h"
#include "value.h"
+#include "regcache.h"
+#include "inferior.h"
+#include "osabi.h"
+#include "reggroups.h"
+#include "dwarf2-frame.h"
+#include "gdb_string.h"
+
+#include "i386-tdep.h"
+#include "i386-linux-tdep.h"
+#include "glibc-tdep.h"
+#include "solib-svr4.h"
+
+/* Return the name of register REG. */
+
+static const char *
+i386_linux_register_name (int reg)
+{
+ /* Deal with the extra "orig_eax" pseudo register. */
+ if (reg == I386_LINUX_ORIG_EAX_REGNUM)
+ return "orig_eax";
+
+ return i386_register_name (reg);
+}
+
+/* Return non-zero, when the register is in the corresponding register
+ group. Put the LINUX_ORIG_EAX register in the system group. */
+static int
+i386_linux_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group)
+{
+ if (regnum == I386_LINUX_ORIG_EAX_REGNUM)
+ return (group == system_reggroup
+ || group == save_reggroup
+ || group == restore_reggroup);
+ return i386_register_reggroup_p (gdbarch, regnum, group);
+}
\f
/* Recognizing signal handler frames. */
-/* Linux has two flavors of signals. Normal signal handlers, and
+/* GNU/Linux has two flavors of signals. Normal signal handlers, and
"realtime" (RT) signals. The RT signals can provide additional
information to the signal handler if the SA_SIGINFO flag is set
when establishing a signal handler using `sigaction'. It is not
- unlikely that future versions of Linux will support SA_SIGINFO for
- normal signals too. */
+ unlikely that future versions of GNU/Linux will support SA_SIGINFO
+ for normal signals too. */
/* When the i386 Linux kernel calls a signal handler and the
SA_RESTORER flag isn't set, the return address points to a bit of
The instruction sequence for normal signals is
pop %eax
- mov $0x77,%eax
+ mov $0x77, %eax
int $0x80
or 0x58 0xb8 0x77 0x00 0x00 0x00 0xcd 0x80.
Checking for the code sequence should be somewhat reliable, because
the effect is to call the system call sigreturn. This is unlikely
- to occur anywhere other than a signal trampoline.
+ to occur anywhere other than in a signal trampoline.
It kind of sucks that we have to read memory from the process in
order to identify a signal trampoline, but there doesn't seem to be
- any other way. The IN_SIGTRAMP macro in tm-linux.h arranges to
- only call us if no function name could be identified, which should
- be the case since the code is on the stack.
+ any other way. Therefore we only do the memory reads if no
+ function name could be identified, which should be the case since
+ the code is on the stack.
Detection of signal trampolines for handlers that set the
SA_RESTORER flag is in general not possible. Unfortunately this is
to the ones used by the kernel. Therefore, these trampolines are
supported too. */
-#define LINUX_SIGTRAMP_INSN0 (0x58) /* pop %eax */
-#define LINUX_SIGTRAMP_OFFSET0 (0)
-#define LINUX_SIGTRAMP_INSN1 (0xb8) /* mov $NNNN,%eax */
-#define LINUX_SIGTRAMP_OFFSET1 (1)
-#define LINUX_SIGTRAMP_INSN2 (0xcd) /* int */
-#define LINUX_SIGTRAMP_OFFSET2 (6)
+#define LINUX_SIGTRAMP_INSN0 0x58 /* pop %eax */
+#define LINUX_SIGTRAMP_OFFSET0 0
+#define LINUX_SIGTRAMP_INSN1 0xb8 /* mov $NNNN, %eax */
+#define LINUX_SIGTRAMP_OFFSET1 1
+#define LINUX_SIGTRAMP_INSN2 0xcd /* int */
+#define LINUX_SIGTRAMP_OFFSET2 6
static const unsigned char linux_sigtramp_code[] =
{
LINUX_SIGTRAMP_INSN0, /* pop %eax */
- LINUX_SIGTRAMP_INSN1, 0x77, 0x00, 0x00, 0x00, /* mov $0x77,%eax */
+ LINUX_SIGTRAMP_INSN1, 0x77, 0x00, 0x00, 0x00, /* mov $0x77, %eax */
LINUX_SIGTRAMP_INSN2, 0x80 /* int $0x80 */
};
#define LINUX_SIGTRAMP_LEN (sizeof linux_sigtramp_code)
-/* If PC is in a sigtramp routine, return the address of the start of
- the routine. Otherwise, return 0. */
+/* If NEXT_FRAME unwinds into a sigtramp routine, return the address
+ of the start of the routine. Otherwise, return 0. */
static CORE_ADDR
-i386_linux_sigtramp_start (CORE_ADDR pc)
+i386_linux_sigtramp_start (struct frame_info *next_frame)
{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
unsigned char buf[LINUX_SIGTRAMP_LEN];
/* We only recognize a signal trampoline if PC is at the start of
PC is not at the start of the instruction sequence, there will be
a few trailing readable bytes on the stack. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, LINUX_SIGTRAMP_LEN))
return 0;
if (buf[0] != LINUX_SIGTRAMP_INSN0)
pc -= adjust;
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, LINUX_SIGTRAMP_LEN))
return 0;
}
/* This function does the same for RT signals. Here the instruction
sequence is
- mov $0xad,%eax
+ mov $0xad, %eax
int $0x80
or 0xb8 0xad 0x00 0x00 0x00 0xcd 0x80.
The effect is to call the system call rt_sigreturn. */
-#define LINUX_RT_SIGTRAMP_INSN0 (0xb8) /* mov $NNNN,%eax */
-#define LINUX_RT_SIGTRAMP_OFFSET0 (0)
-#define LINUX_RT_SIGTRAMP_INSN1 (0xcd) /* int */
-#define LINUX_RT_SIGTRAMP_OFFSET1 (5)
+#define LINUX_RT_SIGTRAMP_INSN0 0xb8 /* mov $NNNN, %eax */
+#define LINUX_RT_SIGTRAMP_OFFSET0 0
+#define LINUX_RT_SIGTRAMP_INSN1 0xcd /* int */
+#define LINUX_RT_SIGTRAMP_OFFSET1 5
static const unsigned char linux_rt_sigtramp_code[] =
{
- LINUX_RT_SIGTRAMP_INSN0, 0xad, 0x00, 0x00, 0x00, /* mov $0xad,%eax */
+ LINUX_RT_SIGTRAMP_INSN0, 0xad, 0x00, 0x00, 0x00, /* mov $0xad, %eax */
LINUX_RT_SIGTRAMP_INSN1, 0x80 /* int $0x80 */
};
#define LINUX_RT_SIGTRAMP_LEN (sizeof linux_rt_sigtramp_code)
-/* If PC is in a RT sigtramp routine, return the address of the start
- of the routine. Otherwise, return 0. */
+/* If NEXT_FRAME unwinds into an RT sigtramp routine, return the
+ address of the start of the routine. Otherwise, return 0. */
static CORE_ADDR
-i386_linux_rt_sigtramp_start (CORE_ADDR pc)
+i386_linux_rt_sigtramp_start (struct frame_info *next_frame)
{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
unsigned char buf[LINUX_RT_SIGTRAMP_LEN];
/* We only recognize a signal trampoline if PC is at the start of
PC is not at the start of the instruction sequence, there will be
a few trailing readable bytes on the stack. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, LINUX_RT_SIGTRAMP_LEN))
return 0;
if (buf[0] != LINUX_RT_SIGTRAMP_INSN0)
pc -= LINUX_RT_SIGTRAMP_OFFSET1;
- if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0)
+ if (!safe_frame_unwind_memory (next_frame, pc, buf,
+ LINUX_RT_SIGTRAMP_LEN))
return 0;
}
return pc;
}
-/* Return whether PC is in a Linux sigtramp routine. */
+/* Return whether the frame preceding NEXT_FRAME corresponds to a
+ GNU/Linux sigtramp routine. */
-int
-i386_linux_in_sigtramp (CORE_ADDR pc, char *name)
+static int
+i386_linux_sigtramp_p (struct frame_info *next_frame)
{
- if (name)
- return STREQ ("__restore", name) || STREQ ("__restore_rt", name);
-
- return (i386_linux_sigtramp_start (pc) != 0
- || i386_linux_rt_sigtramp_start (pc) != 0);
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ char *name;
+
+ find_pc_partial_function (pc, &name, NULL, NULL);
+
+ /* If we have NAME, we can optimize the search. The trampolines are
+ named __restore and __restore_rt. However, they aren't dynamically
+ exported from the shared C library, so the trampoline may appear to
+ be part of the preceding function. This should always be sigaction,
+ __sigaction, or __libc_sigaction (all aliases to the same function). */
+ if (name == NULL || strstr (name, "sigaction") != NULL)
+ return (i386_linux_sigtramp_start (next_frame) != 0
+ || i386_linux_rt_sigtramp_start (next_frame) != 0);
+
+ return (strcmp ("__restore", name) == 0
+ || strcmp ("__restore_rt", name) == 0);
}
-/* Assuming FRAME is for a Linux sigtramp routine, return the address
- of the associated sigcontext structure. */
+/* Return one if the unwound PC from NEXT_FRAME is in a signal trampoline
+ which may have DWARF-2 CFI. */
-CORE_ADDR
-i386_linux_sigcontext_addr (struct frame_info *frame)
+static int
+i386_linux_dwarf_signal_frame_p (struct gdbarch *gdbarch,
+ struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ char *name;
+
+ find_pc_partial_function (pc, &name, NULL, NULL);
+
+ /* If a vsyscall DSO is in use, the signal trampolines may have these
+ names. */
+ if (name && (strcmp (name, "__kernel_sigreturn") == 0
+ || strcmp (name, "__kernel_rt_sigreturn") == 0))
+ return 1;
+
+ return 0;
+}
+
+/* Offset to struct sigcontext in ucontext, from <asm/ucontext.h>. */
+#define I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET 20
+
+/* Assuming NEXT_FRAME is a frame following a GNU/Linux sigtramp
+ routine, return the address of the associated sigcontext structure. */
+
+static CORE_ADDR
+i386_linux_sigcontext_addr (struct frame_info *next_frame)
{
CORE_ADDR pc;
+ CORE_ADDR sp;
+ char buf[4];
- pc = i386_linux_sigtramp_start (frame->pc);
+ frame_unwind_register (next_frame, I386_ESP_REGNUM, buf);
+ sp = extract_unsigned_integer (buf, 4);
+
+ pc = i386_linux_sigtramp_start (next_frame);
if (pc)
{
- CORE_ADDR sp;
-
- if (frame->next)
- /* If this isn't the top frame, the next frame must be for the
- signal handler itself. The sigcontext structure lives on
- the stack, right after the signum argument. */
- return frame->next->frame + 12;
-
- /* This is the top frame. We'll have to find the address of the
- sigcontext structure by looking at the stack pointer. Keep
- in mind that the first instruction of the sigtramp code is
- "pop %eax". If the PC is at this instruction, adjust the
- returned value accordingly. */
- sp = read_register (SP_REGNUM);
- if (pc == frame->pc)
+ /* The sigcontext structure lives on the stack, right after
+ the signum argument. We determine the address of the
+ sigcontext structure by looking at the frame's stack
+ pointer. Keep in mind that the first instruction of the
+ sigtramp code is "pop %eax". If the PC is after this
+ instruction, adjust the returned value accordingly. */
+ if (pc == frame_pc_unwind (next_frame))
return sp + 4;
return sp;
}
- pc = i386_linux_rt_sigtramp_start (frame->pc);
+ pc = i386_linux_rt_sigtramp_start (next_frame);
if (pc)
{
- if (frame->next)
- /* If this isn't the top frame, the next frame must be for the
- signal handler itself. The sigcontext structure is part of
- the user context. A pointer to the user context is passed
- as the third argument to the signal handler. */
- return read_memory_integer (frame->next->frame + 16, 4) + 20;
-
- /* This is the top frame. Again, use the stack pointer to find
- the address of the sigcontext structure. */
- return read_memory_integer (read_register (SP_REGNUM) + 8, 4) + 20;
+ CORE_ADDR ucontext_addr;
+
+ /* The sigcontext structure is part of the user context. A
+ pointer to the user context is passed as the third argument
+ to the signal handler. */
+ read_memory (sp + 8, buf, 4);
+ ucontext_addr = extract_unsigned_integer (buf, 4);
+ return ucontext_addr + I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET;
}
error ("Couldn't recognize signal trampoline.");
return 0;
}
-/* Offset to saved PC in sigcontext, from <asm/sigcontext.h>. */
-#define LINUX_SIGCONTEXT_PC_OFFSET (56)
-
-/* Assuming FRAME is for a Linux sigtramp routine, return the saved
- program counter. */
+/* Set the program counter for process PTID to PC. */
-CORE_ADDR
-i386_linux_sigtramp_saved_pc (struct frame_info *frame)
+static void
+i386_linux_write_pc (CORE_ADDR pc, ptid_t ptid)
{
- CORE_ADDR addr;
- addr = i386_linux_sigcontext_addr (frame);
- return read_memory_integer (addr + LINUX_SIGCONTEXT_PC_OFFSET, 4);
+ write_register_pid (I386_EIP_REGNUM, pc, ptid);
+
+ /* We must be careful with modifying the program counter. If we
+ just interrupted a system call, the kernel might try to restart
+ it when we resume the inferior. On restarting the system call,
+ the kernel will try backing up the program counter even though it
+ no longer points at the system call. This typically results in a
+ SIGSEGV or SIGILL. We can prevent this by writing `-1' in the
+ "orig_eax" pseudo-register.
+
+ Note that "orig_eax" is saved when setting up a dummy call frame.
+ This means that it is properly restored when that frame is
+ popped, and that the interrupted system call will be restarted
+ when we resume the inferior on return from a function call from
+ within GDB. In all other cases the system call will not be
+ restarted. */
+ write_register_pid (I386_LINUX_ORIG_EAX_REGNUM, -1, ptid);
}
+\f
+
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets in `struct user' that are used for a.out
+ core-dumps. These are also used by ptrace(2). The corresponding
+ types are `elf_gregset_t' for the general-purpose registers (with
+ `elf_greg_t' the type of a single GP register) and `elf_fpregset_t'
+ for the floating-point registers.
-/* Offset to saved SP in sigcontext, from <asm/sigcontext.h>. */
-#define LINUX_SIGCONTEXT_SP_OFFSET (28)
+ Those types used to be available under the names `gregset_t' and
+ `fpregset_t' too, and GDB used those names in the past. But those
+ names are now used for the register sets used in the `mcontext_t'
+ type, which have a different size and layout. */
-/* Assuming FRAME is for a Linux sigtramp routine, return the saved
- stack pointer. */
+/* Mapping between the general-purpose registers in `struct user'
+ format and GDB's register cache layout. */
-CORE_ADDR
-i386_linux_sigtramp_saved_sp (struct frame_info *frame)
+/* From <sys/reg.h>. */
+static int i386_linux_gregset_reg_offset[] =
{
- CORE_ADDR addr;
- addr = i386_linux_sigcontext_addr (frame);
- return read_memory_integer (addr + LINUX_SIGCONTEXT_SP_OFFSET, 4);
-}
+ 6 * 4, /* %eax */
+ 1 * 4, /* %ecx */
+ 2 * 4, /* %edx */
+ 0 * 4, /* %ebx */
+ 15 * 4, /* %esp */
+ 5 * 4, /* %ebp */
+ 3 * 4, /* %esi */
+ 4 * 4, /* %edi */
+ 12 * 4, /* %eip */
+ 14 * 4, /* %eflags */
+ 13 * 4, /* %cs */
+ 16 * 4, /* %ss */
+ 7 * 4, /* %ds */
+ 8 * 4, /* %es */
+ 9 * 4, /* %fs */
+ 10 * 4, /* %gs */
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1,
+ 11 * 4 /* "orig_eax" */
+};
+
+/* Mapping between the general-purpose registers in `struct
+ sigcontext' format and GDB's register cache layout. */
-/* Immediately after a function call, return the saved pc. */
+/* From <asm/sigcontext.h>. */
+static int i386_linux_sc_reg_offset[] =
+{
+ 11 * 4, /* %eax */
+ 10 * 4, /* %ecx */
+ 9 * 4, /* %edx */
+ 8 * 4, /* %ebx */
+ 7 * 4, /* %esp */
+ 6 * 4, /* %ebp */
+ 5 * 4, /* %esi */
+ 4 * 4, /* %edi */
+ 14 * 4, /* %eip */
+ 16 * 4, /* %eflags */
+ 15 * 4, /* %cs */
+ 18 * 4, /* %ss */
+ 3 * 4, /* %ds */
+ 2 * 4, /* %es */
+ 1 * 4, /* %fs */
+ 0 * 4 /* %gs */
+};
-CORE_ADDR
-i386_linux_saved_pc_after_call (struct frame_info *frame)
+static void
+i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
- if (frame->signal_handler_caller)
- return i386_linux_sigtramp_saved_pc (frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* GNU/Linux uses ELF. */
+ i386_elf_init_abi (info, gdbarch);
+
+ /* Since we have the extra "orig_eax" register on GNU/Linux, we have
+ to adjust a few things. */
+
+ set_gdbarch_write_pc (gdbarch, i386_linux_write_pc);
+ set_gdbarch_num_regs (gdbarch, I386_LINUX_NUM_REGS);
+ set_gdbarch_register_name (gdbarch, i386_linux_register_name);
+ set_gdbarch_register_reggroup_p (gdbarch, i386_linux_register_reggroup_p);
- return read_memory_integer (read_register (SP_REGNUM), 4);
+ tdep->gregset_reg_offset = i386_linux_gregset_reg_offset;
+ tdep->gregset_num_regs = ARRAY_SIZE (i386_linux_gregset_reg_offset);
+ tdep->sizeof_gregset = 17 * 4;
+
+ tdep->jb_pc_offset = 20; /* From <bits/setjmp.h>. */
+
+ tdep->sigtramp_p = i386_linux_sigtramp_p;
+ tdep->sigcontext_addr = i386_linux_sigcontext_addr;
+ tdep->sc_reg_offset = i386_linux_sc_reg_offset;
+ tdep->sc_num_regs = ARRAY_SIZE (i386_linux_sc_reg_offset);
+
+ /* GNU/Linux uses SVR4-style shared libraries. */
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, svr4_ilp32_fetch_link_map_offsets);
+
+ /* GNU/Linux uses the dynamic linker included in the GNU C Library. */
+ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);
+
+ dwarf2_frame_set_signal_frame_p (gdbarch, i386_linux_dwarf_signal_frame_p);
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern void _initialize_i386_linux_tdep (void);
+
+void
+_initialize_i386_linux_tdep (void)
+{
+ gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_LINUX,
+ i386_linux_init_abi);
}