length in bytes. Otherwise, return zero. */
static int
-i386_syscall_p (const gdb_byte *insn, ULONGEST *lengthp)
+i386_syscall_p (const gdb_byte *insn, int *lengthp)
{
if (insn[0] == 0xcd)
{
return 0;
}
+/* Some kernels may run one past a syscall insn, so we have to cope.
+ Otherwise this is just simple_displaced_step_copy_insn. */
+
+struct displaced_step_closure *
+i386_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
+{
+ size_t len = gdbarch_max_insn_length (gdbarch);
+ gdb_byte *buf = xmalloc (len);
+
+ read_memory (from, buf, len);
+
+ /* GDB may get control back after the insn after the syscall.
+ Presumably this is a kernel bug.
+ If this is a syscall, make sure there's a nop afterwards. */
+ {
+ int syscall_length;
+ gdb_byte *insn;
+
+ insn = i386_skip_prefixes (buf, len);
+ if (insn != NULL && i386_syscall_p (insn, &syscall_length))
+ insn[syscall_length] = NOP_OPCODE;
+ }
+
+ write_memory (to, buf, len);
+
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog, "displaced: copy %s->%s: ",
+ paddress (gdbarch, from), paddress (gdbarch, to));
+ displaced_step_dump_bytes (gdb_stdlog, buf, len);
+ }
+
+ return (struct displaced_step_closure *) buf;
+}
+
/* Fix up the state of registers and memory after having single-stepped
a displaced instruction. */
&& ! i386_ret_p (insn))
{
ULONGEST orig_eip;
- ULONGEST insn_len;
+ int insn_len;
regcache_cooked_read_unsigned (regs, I386_EIP_REGNUM, &orig_eip);
it unrelocated. Goodness help us if there are PC-relative
system calls. */
if (i386_syscall_p (insn, &insn_len)
- && orig_eip != to + (insn - insn_start) + insn_len)
+ && orig_eip != to + (insn - insn_start) + insn_len
+ /* GDB can get control back after the insn after the syscall.
+ Presumably this is a kernel bug.
+ i386_displaced_step_copy_insn ensures its a nop,
+ we add one to the length for it. */
+ && orig_eip != to + (insn - insn_start) + insn_len + 1)
{
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
paddress (gdbarch, retaddr));
}
}
+
+static void
+append_insns (CORE_ADDR *to, ULONGEST len, const gdb_byte *buf)
+{
+ target_write_memory (*to, buf, len);
+ *to += len;
+}
+
+static void
+i386_relocate_instruction (struct gdbarch *gdbarch,
+ CORE_ADDR *to, CORE_ADDR oldloc)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ gdb_byte buf[I386_MAX_INSN_LEN];
+ int offset = 0, rel32, newrel;
+ int insn_length;
+ gdb_byte *insn = buf;
+
+ read_memory (oldloc, buf, I386_MAX_INSN_LEN);
+
+ insn_length = gdb_buffered_insn_length (gdbarch, insn,
+ I386_MAX_INSN_LEN, oldloc);
+
+ /* Get past the prefixes. */
+ insn = i386_skip_prefixes (insn, I386_MAX_INSN_LEN);
+
+ /* Adjust calls with 32-bit relative addresses as push/jump, with
+ the address pushed being the location where the original call in
+ the user program would return to. */
+ if (insn[0] == 0xe8)
+ {
+ gdb_byte push_buf[16];
+ unsigned int ret_addr;
+
+ /* Where "ret" in the original code will return to. */
+ ret_addr = oldloc + insn_length;
+ push_buf[0] = 0x68; /* pushq $... */
+ memcpy (&push_buf[1], &ret_addr, 4);
+ /* Push the push. */
+ append_insns (to, 5, push_buf);
+
+ /* Convert the relative call to a relative jump. */
+ insn[0] = 0xe9;
+
+ /* Adjust the destination offset. */
+ rel32 = extract_signed_integer (insn + 1, 4, byte_order);
+ newrel = (oldloc - *to) + rel32;
+ store_signed_integer (insn + 1, 4, newrel, byte_order);
+
+ /* Write the adjusted jump into its displaced location. */
+ append_insns (to, 5, insn);
+ return;
+ }
+
+ /* Adjust jumps with 32-bit relative addresses. Calls are already
+ handled above. */
+ if (insn[0] == 0xe9)
+ offset = 1;
+ /* Adjust conditional jumps. */
+ else if (insn[0] == 0x0f && (insn[1] & 0xf0) == 0x80)
+ offset = 2;
+
+ if (offset)
+ {
+ rel32 = extract_signed_integer (insn + offset, 4, byte_order);
+ newrel = (oldloc - *to) + rel32;
+ store_signed_integer (insn + offset, 4, newrel, byte_order);
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "Adjusted insn rel32=0x%s at 0x%s to"
+ " rel32=0x%s at 0x%s\n",
+ hex_string (rel32), paddress (gdbarch, oldloc),
+ hex_string (newrel), paddress (gdbarch, *to));
+ }
+
+ /* Write the adjusted instructions into their displaced
+ location. */
+ append_insns (to, insn_length, buf);
+}
+
\f
#ifdef I386_REGNO_TO_SYMMETRY
#error "The Sequent Symmetry is no longer supported."
struct regcache *regcache, int regnum,
const void *xstateregs, size_t len)
{
- const struct gdbarch_tdep *tdep = gdbarch_tdep (regset->arch);
i387_supply_xsave (regcache, regnum, xstateregs);
}
const struct regcache *regcache,
int regnum, void *xstateregs, size_t len)
{
- const struct gdbarch_tdep *tdep = gdbarch_tdep (regset->arch);
i387_collect_xsave (regcache, regnum, xstateregs, 1);
}
if (irp->override >= 0)
{
- warning (_("Process record ignores the memory change "
- "of instruction at address %s because it "
- "can't get the value of the segment register."),
- paddress (gdbarch, irp->orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, irp->orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
+
return 0;
}
case 0xa3:
if (ir.override >= 0)
{
- warning (_("Process record ignores the memory change "
- "of instruction at address %s because "
- "it can't get the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
if (ir.aflag && (es != ds))
{
/* addr += ((uint32_t) read_register (I386_ES_REGNUM)) << 4; */
- warning (_("Process record ignores the memory "
- "change of instruction at address %s "
- "because it can't get the value of the "
- "ES segment register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
}
if (ir.override >= 0)
{
- warning (_("Process record ignores the memory "
- "change of instruction at "
- "address %s because it can't get "
- "the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
/* sidt */
if (ir.override >= 0)
{
- warning (_("Process record ignores the memory "
- "change of instruction at "
- "address %s because it can't get "
- "the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
tdesc_data = tdesc_data_alloc ();
+ set_gdbarch_relocate_instruction (gdbarch, i386_relocate_instruction);
+
/* Hook in ABI-specific overrides, if they have been registered. */
info.tdep_info = (void *) tdesc_data;
gdbarch_init_osabi (info, gdbarch);