/* Intel 386 target-dependent stuff.
- Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
- 2010, 2011 Free Software Foundation, Inc.
+ Copyright (C) 1988-2012 Free Software Foundation, Inc.
This file is part of GDB.
#include "features/i386/i386-avx.c"
#include "features/i386/i386-mmx.c"
+#include "ax.h"
+#include "ax-gdb.h"
+
/* Register names. */
static const char *i386_register_names[] =
its legitimate values. */
static const char att_flavor[] = "att";
static const char intel_flavor[] = "intel";
-static const char *valid_flavors[] =
+static const char *const valid_flavors[] =
{
att_flavor,
intel_flavor,
static int
i386_syscall_p (const gdb_byte *insn, int *lengthp)
{
- if (insn[0] == 0xcd)
+ /* Is it 'int $0x80'? */
+ if ((insn[0] == 0xcd && insn[1] == 0x80)
+ /* Or is it 'sysenter'? */
+ || (insn[0] == 0x0f && insn[1] == 0x34)
+ /* Or is it 'syscall'? */
+ || (insn[0] == 0x0f && insn[1] == 0x05))
{
*lengthp = 2;
return 1;
get_frame_register (this_frame, I386_EBP_REGNUM, buf);
cache->base = extract_unsigned_integer (buf, 4, byte_order);
if (cache->base == 0)
- return;
+ {
+ cache->base_p = 1;
+ return;
+ }
/* For normal frames, %eip is stored at 4(%ebp). */
cache->saved_regs[I386_EIP_REGNUM] = 4;
i386_in_stack_tramp_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
gdb_byte insn;
- char *name;
+ const char *name;
/* A stack trampoline is detected if no name is associated
to the current pc and if it points inside a trampoline
i386_stack_tramp_frame_sniffer
};
\f
+/* Generate a bytecode expression to get the value of the saved PC. */
+
+static void
+i386_gen_return_address (struct gdbarch *gdbarch,
+ struct agent_expr *ax, struct axs_value *value,
+ CORE_ADDR scope)
+{
+ /* The following sequence assumes the traditional use of the base
+ register. */
+ ax_reg (ax, I386_EBP_REGNUM);
+ ax_const_l (ax, 4);
+ ax_simple (ax, aop_add);
+ value->type = register_type (gdbarch, I386_EIP_REGNUM);
+ value->kind = axs_lvalue_memory;
+}
+\f
/* Signal trampolines. */
/* See the end of i386_push_dummy_call. */
return frame_id_build (fp + 8, get_frame_pc (this_frame));
}
+
+/* _Decimal128 function return values need 16-byte alignment on the
+ stack. */
+
+static CORE_ADDR
+i386_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
+{
+ return sp & -(CORE_ADDR)16;
+}
\f
/* Figure out where the longjmp will land. Slurp the args out of the
static const char default_struct_convention[] = "default";
static const char pcc_struct_convention[] = "pcc";
static const char reg_struct_convention[] = "reg";
-static const char *valid_conventions[] =
+static const char *const valid_conventions[] =
{
default_struct_convention,
pcc_struct_convention,
read_memory_unsigned_integer (pc + 2, 4, byte_order);
struct minimal_symbol *indsym =
indirect ? lookup_minimal_symbol_by_pc (indirect) : 0;
- char *symname = indsym ? SYMBOL_LINKAGE_NAME (indsym) : 0;
+ const char *symname = indsym ? SYMBOL_LINKAGE_NAME (indsym) : 0;
if (symname)
{
i386_sigtramp_p (struct frame_info *this_frame)
{
CORE_ADDR pc = get_frame_pc (this_frame);
- char *name;
+ const char *name;
find_pc_partial_function (pc, &name, NULL, NULL);
return (name && strcmp ("_sigtramp", name) == 0);
i386_svr4_sigtramp_p (struct frame_info *this_frame)
{
CORE_ADDR pc = get_frame_pc (this_frame);
- char *name;
+ const char *name;
/* UnixWare uses _sigacthandler. The origin of the other symbols is
currently unknown. */
};
/* Check that the given address appears suitable for a fast
- tracepoint, which on x86 means that we need an instruction of at
+ tracepoint, which on x86-64 means that we need an instruction of at
least 5 bytes, so that we can overwrite it with a 4-byte-offset
jump and not have to worry about program jumps to an address in the
- middle of the tracepoint jump. Returns 1 if OK, and writes a size
+ middle of the tracepoint jump. On x86, it may be possible to use
+ 4-byte jumps with a 2-byte offset to a trampoline located in the
+ bottom 64 KiB of memory. Returns 1 if OK, and writes a size
of instruction to replace, and 0 if not, plus an explanatory
string. */
int len, jumplen;
static struct ui_file *gdb_null = NULL;
- /* This is based on the target agent using a 4-byte relative jump.
- Alternate future possibilities include 8-byte offset for x86-84,
- or 3-byte jumps if the program has trampoline space close by. */
- jumplen = 5;
+ /* Ask the target for the minimum instruction length supported. */
+ jumplen = target_get_min_fast_tracepoint_insn_len ();
+
+ if (jumplen < 0)
+ {
+ /* If the target does not support the get_min_fast_tracepoint_insn_len
+ operation, assume that fast tracepoints will always be implemented
+ using 4-byte relative jumps on both x86 and x86-64. */
+ jumplen = 5;
+ }
+ else if (jumplen == 0)
+ {
+ /* If the target does support get_min_fast_tracepoint_insn_len but
+ returns zero, then the IPA has not loaded yet. In this case,
+ we optimistically assume that truncated 2-byte relative jumps
+ will be available on x86, and compensate later if this assumption
+ turns out to be incorrect. On x86-64 architectures, 4-byte relative
+ jumps will always be used. */
+ jumplen = (register_size (gdbarch, 0) == 8) ? 5 : 4;
+ }
/* Dummy file descriptor for the disassembler. */
if (!gdb_null)
/* Check for fit. */
len = gdb_print_insn (gdbarch, addr, gdb_null, NULL);
+ if (isize)
+ *isize = len;
+
if (len < jumplen)
{
/* Return a bit of target-specific detail to add to the caller's
len, jumplen);
return 0;
}
-
- if (isize)
- *isize = len;
- if (msg)
- *msg = NULL;
- return 1;
+ else
+ {
+ if (msg)
+ *msg = NULL;
+ return 1;
+ }
}
static int
tdep->record_regmap = i386_record_regmap;
+ set_gdbarch_long_long_align_bit (gdbarch, 32);
+
/* The format used for `long double' on almost all i386 targets is
the i387 extended floating-point format. In fact, of all targets
in the GCC 2.95 tree, only OSF/1 does it different, and insists
/* Call dummy code. */
set_gdbarch_push_dummy_call (gdbarch, i386_push_dummy_call);
+ set_gdbarch_frame_align (gdbarch, i386_frame_align);
set_gdbarch_convert_register_p (gdbarch, i386_convert_register_p);
set_gdbarch_register_to_value (gdbarch, i386_register_to_value);
set_gdbarch_relocate_instruction (gdbarch, i386_relocate_instruction);
+ set_gdbarch_gen_return_address (gdbarch, i386_gen_return_address);
+
/* Hook in ABI-specific overrides, if they have been registered. */
info.tdep_info = (void *) tdesc_data;
gdbarch_init_osabi (info, gdbarch);
projects / deliverable / binutils-gdb.git / blobdiff