-/* Target-dependent code for GDB, the GNU debugger.
- Copyright 2001, 2002
- Free Software Foundation, Inc.
+/* Target-dependent code for the i386.
+
+ Copyright 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
This file is part of GDB.
#ifndef I386_TDEP_H
#define I386_TDEP_H
-#include "osabi.h"
+struct frame_info;
+struct gdbarch;
+struct reggroup;
+struct regset;
+struct regcache;
/* GDB's i386 target supports both the 32-bit Intel Architecture
(IA-32) and the 64-bit AMD x86-64 architecture. Internally it uses
/* i386 architecture specific information. */
struct gdbarch_tdep
{
- /* ABI. */
- enum gdb_osabi osabi;
+ /* General-purpose registers. */
+ struct regset *gregset;
+ int *gregset_reg_offset;
+ int gregset_num_regs;
+ size_t sizeof_gregset;
+
+ /* Floating-point registers. */
+ struct regset *fpregset;
+ size_t sizeof_fpregset;
+
+ /* Register number for %st(0). The register numbers for the other
+ registers follow from this one. Set this to -1 to indicate the
+ absence of an FPU. */
+ int st0_regnum;
+
+ /* Register number for %mm0. Set this to -1 to indicate the absence
+ of MMX support. */
+ int mm0_regnum;
/* Number of SSE registers. */
int num_xmm_regs;
CORE_ADDR sigtramp_start;
CORE_ADDR sigtramp_end;
+ /* Detect sigtramp. */
+ int (*sigtramp_p) (struct frame_info *);
+
/* Get address of sigcontext for sigtramp. */
CORE_ADDR (*sigcontext_addr) (struct frame_info *);
- /* Offset of saved PC and SP in `struct sigcontext'. */
+ /* Offset of registers in `struct sigcontext'. */
+ int *sc_reg_offset;
+ int sc_num_regs;
+
+ /* Offset of saved PC and SP in `struct sigcontext'. Usage of these
+ is deprecated, please use `sc_reg_offset' instead. */
int sc_pc_offset;
int sc_sp_offset;
};
/* Floating-point registers. */
-#define FPU_REG_RAW_SIZE 10
-
/* All FPU control regusters (except for FIOFF and FOOFF) are 16-bit
(at most) in the FPU, but are zero-extended to 32 bits in GDB's
register cache. */
-/* "Generic" floating point control register. */
-#define FPC_REGNUM (FP0_REGNUM + 8)
-
-/* FPU control word. */
-#define FCTRL_REGNUM FPC_REGNUM
-
-/* FPU status word. */
-#define FSTAT_REGNUM (FPC_REGNUM + 1)
-
-/* FPU register tag word. */
-#define FTAG_REGNUM (FPC_REGNUM + 2)
-
-/* FPU instruction's code segment selector, called "FPU Instruction
- Pointer Selector" in the IA-32 manuals. */
-#define FISEG_REGNUM (FPC_REGNUM + 3)
-
-/* FPU instruction's offset within segment. */
-#define FIOFF_REGNUM (FPC_REGNUM + 4)
-
-/* FPU operand's data segment. */
-#define FOSEG_REGNUM (FPC_REGNUM + 5)
+/* Return non-zero if REGNUM matches the FP register and the FP
+ register set is active. */
+extern int i386_fp_regnum_p (int regnum);
+extern int i386_fpc_regnum_p (int regnum);
-/* FPU operand's offset within segment */
-#define FOOFF_REGNUM (FPC_REGNUM + 6)
+/* Register numbers of various important registers. */
-/* FPU opcode, bottom eleven bits. */
-#define FOP_REGNUM (FPC_REGNUM + 7)
-
-/* Return non-zero if N corresponds to a FPU data registers. */
-#define FP_REGNUM_P(n) (FP0_REGNUM <= (n) && (n) < FPC_REGNUM)
-
-/* Return non-zero if N corresponds to a FPU control register. */
-#define FPC_REGNUM_P(n) (FPC_REGNUM <= (n) && (n) < XMM0_REGNUM)
-
-/* SSE registers. */
-
-/* First SSE data register. */
-#define XMM0_REGNUM (FPC_REGNUM + 8)
-
-/* SSE control/status register. */
-#define MXCSR_REGNUM \
- (XMM0_REGNUM + gdbarch_tdep (current_gdbarch)->num_xmm_regs)
-
-/* Return non-zero if N corresponds to a SSE data register. */
-#define SSE_REGNUM_P(n) (XMM0_REGNUM <= (n) && (n) < MXCSR_REGNUM)
-
-/* FIXME: kettenis/2001-11-24: Obsolete macro's. */
-#define FCS_REGNUM FISEG_REGNUM
-#define FCOFF_REGNUM FIOFF_REGNUM
-#define FDS_REGNUM FOSEG_REGNUM
-#define FDOFF_REGNUM FOOFF_REGNUM
-#define IS_FP_REGNUM(n) FP_REGNUM_P (n)
-#define IS_FPU_CTRL_REGNUM(n) FPC_REGNUM_P (n)
-#define IS_SSE_REGNUM(n) SSE_REGNUM_P (n)
+enum i386_regnum
+{
+ I386_EAX_REGNUM, /* %eax */
+ I386_ECX_REGNUM, /* %ecx */
+ I386_EDX_REGNUM, /* %edx */
+ I386_EBX_REGNUM, /* %ebx */
+ I386_ESP_REGNUM, /* %esp */
+ I386_EBP_REGNUM, /* %ebp */
+ I386_ESI_REGNUM, /* %esi */
+ I386_EDI_REGNUM, /* %edi */
+ I386_EIP_REGNUM, /* %eip */
+ I386_EFLAGS_REGNUM, /* %eflags */
+ I386_CS_REGNUM, /* %cs */
+ I386_SS_REGNUM, /* %ss */
+ I386_DS_REGNUM, /* %ds */
+ I386_ES_REGNUM, /* %es */
+ I386_FS_REGNUM, /* %fs */
+ I386_GS_REGNUM, /* %gs */
+ I386_ST0_REGNUM /* %st(0) */
+};
#define I386_NUM_GREGS 16
#define I386_NUM_FREGS 16
#define I386_SSE_NUM_REGS (I386_NUM_GREGS + I386_NUM_FREGS \
+ I386_NUM_XREGS)
-/* Sizes of individual register sets. These cover the entire register
- file, so summing up the sizes of those portions actually present
- yields REGISTER_BYTES. */
-#define I386_SIZEOF_GREGS (I386_NUM_GREGS * 4)
-#define I386_SIZEOF_FREGS (8 * 10 + 8 * 4)
-#define I386_SIZEOF_XREGS (8 * 16 + 4)
+/* Size of the largest register. */
+#define I386_MAX_REGISTER_SIZE 16
-#define I386_SSE_SIZEOF_REGS (I386_SIZEOF_GREGS + I386_SIZEOF_FREGS \
- + I386_SIZEOF_XREGS)
+/* Functions exported from i386-tdep.c. */
+extern CORE_ADDR i386_pe_skip_trampoline_code (CORE_ADDR pc, char *name);
-/* Return the name of register REG. */
-extern char const *i386_register_name (int reg);
+/* Return the name of register REGNUM. */
+extern char const *i386_register_name (int regnum);
-/* Return the offset into the register array of the start of register
- number REG. */
-extern int i386_register_byte (int reg);
+/* Return non-zero if REGNUM is a member of the specified group. */
+extern int i386_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group);
-/* Return the number of bytes of storage in GDB's register array
- occupied by register REG. */
-extern int i386_register_raw_size (int reg);
+/* Supply register REGNUM from the general-purpose register set REGSET
+ to register cache REGCACHE. If REGNUM is -1, do this for all
+ registers in REGSET. */
+extern void i386_supply_gregset (const struct regset *regset,
+ struct regcache *regcache, int regnum,
+ const void *gregs, size_t len);
+
+/* Return the appropriate register set for the core section identified
+ by SECT_NAME and SECT_SIZE. */
+extern const struct regset *
+ i386_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name, size_t sect_size);
/* Initialize a basic ELF architecture variant. */
extern void i386_elf_init_abi (struct gdbarch_info, struct gdbarch *);
/* Initialize a SVR4 architecture variant. */
extern void i386_svr4_init_abi (struct gdbarch_info, struct gdbarch *);
-
-/* Functions exported from i386bsd-tdep.c. */
-
-extern CORE_ADDR i386bsd_sigcontext_addr (struct frame_info *frame);
+\f
+
+/* Functions and variables exported from i386bsd-tdep.c. */
+
+extern void i386bsd_init_abi (struct gdbarch_info, struct gdbarch *);
+extern CORE_ADDR i386fbsd_sigtramp_start_addr;
+extern CORE_ADDR i386fbsd_sigtramp_end_addr;
+extern CORE_ADDR i386obsd_sigtramp_start_addr;
+extern CORE_ADDR i386obsd_sigtramp_end_addr;
+extern int i386fbsd4_sc_reg_offset[];
+extern int i386fbsd_sc_reg_offset[];
+extern int i386nbsd_sc_reg_offset[];
+extern int i386obsd_sc_reg_offset[];
+extern int i386bsd_sc_reg_offset[];
#endif /* i386-tdep.h */