Use memmove to copy overlap memory.
[deliverable/binutils-gdb.git] / gdb / i386-tdep.h
index 6013bdf1e090b20c4aa4a07a90941a12b68e6964..72c634e6b7df42249a01b7bb3a9b26de52d2996a 100644 (file)
@@ -53,6 +53,20 @@ enum struct_return
   reg_struct_return            /* Return "short" structures in registers.  */
 };
 
+/* Register classes as defined in the AMD x86-64 psABI.  */
+
+enum amd64_reg_class
+{
+  AMD64_INTEGER,
+  AMD64_SSE,
+  AMD64_SSEUP,
+  AMD64_X87,
+  AMD64_X87UP,
+  AMD64_COMPLEX_X87,
+  AMD64_NO_CLASS,
+  AMD64_MEMORY
+};
+
 /* i386 architecture specific information.  */
 struct gdbarch_tdep
 {
@@ -62,6 +76,35 @@ struct gdbarch_tdep
   int gregset_num_regs;
   size_t sizeof_gregset;
 
+  /* The general-purpose registers used to pass integers when making
+     function calls.  This only applies to amd64, as all parameters
+     are passed through the stack on x86.  */
+  int call_dummy_num_integer_regs;
+  int *call_dummy_integer_regs;
+
+  /* Used on amd64 only.  Classify TYPE according to calling conventions,
+     and store the result in CLASS.  */
+  void (*classify) (struct type *type, enum amd64_reg_class class[2]);
+
+  /* Used on amd64 only.  Non-zero if the first few MEMORY arguments
+     should be passed by pointer.
+
+     More precisely, MEMORY arguments are passed through the stack.
+     But certain architectures require that their address be passed
+     by register as well, if there are still some integer registers
+     available for argument passing.  */
+  int memory_args_by_pointer;
+
+  /* Used on amd64 only.
+
+     If non-zero, then the callers of a function are expected to reserve
+     some space in the stack just before the area where the PC is saved
+     so that the callee may save the integer-parameter registers there.
+     The amount of space is dependent on the list of registers used for
+     integer parameter passing (see component call_dummy_num_integer_regs
+     above).  */
+  int integer_param_regs_saved_in_caller_frame;
+
   /* Floating-point registers.  */
   struct regset *fpregset;
   size_t sizeof_fpregset;
@@ -71,13 +114,47 @@ struct gdbarch_tdep
      absence of an FPU.  */
   int st0_regnum;
 
+  /* Number of MMX registers.  */
+  int num_mmx_regs;
+
   /* Register number for %mm0.  Set this to -1 to indicate the absence
      of MMX support.  */
   int mm0_regnum;
 
+  /* Number of byte registers.  */
+  int num_byte_regs;
+
+  /* Register pseudo number for %al.  */
+  int al_regnum;
+
+  /* Number of pseudo word registers.  */
+  int num_word_regs;
+
+  /* Register number for %ax.  */
+  int ax_regnum;
+
+  /* Number of pseudo dword registers.  */
+  int num_dword_regs;
+
+  /* Register number for %eax.  Set this to -1 to indicate the absence
+     of pseudo dword register support.  */
+  int eax_regnum;
+
+  /* Number of core registers.  */
+  int num_core_regs;
+
   /* Number of SSE registers.  */
   int num_xmm_regs;
 
+  /* Register names.  */
+  const char **register_names;
+
+  /* Target description.  */
+  const struct target_desc *tdesc;
+
+  /* Register group function.  */
+  const void *register_reggroup_p;
+
   /* Offset of saved PC in jmp_buf.  */
   int jb_pc_offset;
 
@@ -104,10 +181,7 @@ struct gdbarch_tdep
   int sc_sp_offset;
 
   /* ISA-specific data types.  */
-  struct type *i386_eflags_type;
-  struct type *i386_mxcsr_type;
   struct type *i386_mmx_type;
-  struct type *i386_sse_type;
   struct type *i387_ext_type;
 
   /* Process record/replay target.  */
@@ -153,7 +227,8 @@ enum i386_regnum
   I386_ES_REGNUM,              /* %es */
   I386_FS_REGNUM,              /* %fs */
   I386_GS_REGNUM,              /* %gs */
-  I386_ST0_REGNUM              /* %st(0) */
+  I386_ST0_REGNUM,             /* %st(0) */
+  I386_MXCSR_REGNUM = 40       /* %mxcsr */ 
 };
 
 /* Register numbers of RECORD_REGMAP.  */
@@ -187,22 +262,31 @@ enum record_i386_regnum
 };
 
 #define I386_NUM_GREGS 16
-#define I386_NUM_FREGS 16
 #define I386_NUM_XREGS  9
 
-#define I386_SSE_NUM_REGS      (I386_NUM_GREGS + I386_NUM_FREGS \
-                                + I386_NUM_XREGS)
+#define I386_SSE_NUM_REGS      (I386_MXCSR_REGNUM + 1)
 
 /* Size of the largest register.  */
 #define I386_MAX_REGISTER_SIZE 16
 
 /* Types for i386-specific registers.  */
-extern struct type *i386_eflags_type (struct gdbarch *gdbarch);
-extern struct type *i386_mxcsr_type (struct gdbarch *gdbarch);
-extern struct type *i386_mmx_type (struct gdbarch *gdbarch);
-extern struct type *i386_sse_type (struct gdbarch *gdbarch);
 extern struct type *i387_ext_type (struct gdbarch *gdbarch);
 
+/* Checks of different pseudo-registers.  */
+extern int i386_byte_regnum_p (struct gdbarch *gdbarch, int regnum);
+extern int i386_word_regnum_p (struct gdbarch *gdbarch, int regnum);
+extern int i386_dword_regnum_p (struct gdbarch *gdbarch, int regnum);
+
+extern const char *i386_pseudo_register_name (struct gdbarch *gdbarch,
+                                             int regnum);
+
+extern void i386_pseudo_register_read (struct gdbarch *gdbarch,
+                                      struct regcache *regcache,
+                                      int regnum, gdb_byte *buf);
+extern void i386_pseudo_register_write (struct gdbarch *gdbarch,
+                                       struct regcache *regcache,
+                                       int regnum, const gdb_byte *buf);
+
 /* Segment selectors.  */
 #define I386_SEL_RPL   0x0003  /* Requester's Privilege Level mask.  */
 #define I386_SEL_UPL   0x0003  /* User Privilige Level. */
@@ -220,9 +304,6 @@ extern CORE_ADDR i386_skip_main_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
 /* Return whether the THIS_FRAME corresponds to a sigtramp routine.  */
 extern int i386_sigtramp_p (struct frame_info *this_frame);
 
-/* Return the name of register REGNUM.  */
-extern char const *i386_register_name (struct gdbarch * gdbarch, int regnum);
-
 /* Return non-zero if REGNUM is a member of the specified group.  */
 extern int i386_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
                                     struct reggroup *group);
This page took 0.025491 seconds and 4 git commands to generate.