/* Intel 387 floating point stuff.
Copyright (C) 1988, 1989, 1991, 1992, 1993, 1994, 1998, 1999, 2000, 2001,
- 2002, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+ 2002, 2003, 2004, 2005, 2007, 2008, 2009 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "doublest.h"
gdb_assert (gdbarch == get_frame_arch (frame));
- /* Define I387_ST0_REGNUM such that we use the proper definitions
- for FRAME's architecture. */
-#define I387_ST0_REGNUM tdep->st0_regnum
-
- fctrl = get_frame_register_unsigned (frame, I387_FCTRL_REGNUM);
- fstat = get_frame_register_unsigned (frame, I387_FSTAT_REGNUM);
- ftag = get_frame_register_unsigned (frame, I387_FTAG_REGNUM);
- fiseg = get_frame_register_unsigned (frame, I387_FISEG_REGNUM);
- fioff = get_frame_register_unsigned (frame, I387_FIOFF_REGNUM);
- foseg = get_frame_register_unsigned (frame, I387_FOSEG_REGNUM);
- fooff = get_frame_register_unsigned (frame, I387_FOOFF_REGNUM);
- fop = get_frame_register_unsigned (frame, I387_FOP_REGNUM);
+ fctrl = get_frame_register_unsigned (frame, I387_FCTRL_REGNUM (tdep));
+ fstat = get_frame_register_unsigned (frame, I387_FSTAT_REGNUM (tdep));
+ ftag = get_frame_register_unsigned (frame, I387_FTAG_REGNUM (tdep));
+ fiseg = get_frame_register_unsigned (frame, I387_FISEG_REGNUM (tdep));
+ fioff = get_frame_register_unsigned (frame, I387_FIOFF_REGNUM (tdep));
+ foseg = get_frame_register_unsigned (frame, I387_FOSEG_REGNUM (tdep));
+ fooff = get_frame_register_unsigned (frame, I387_FOOFF_REGNUM (tdep));
+ fop = get_frame_register_unsigned (frame, I387_FOP_REGNUM (tdep));
top = ((fstat >> 11) & 7);
break;
}
- get_frame_register (frame, (fpreg + 8 - top) % 8 + I387_ST0_REGNUM, raw);
+ get_frame_register (frame, (fpreg + 8 - top) % 8 + I387_ST0_REGNUM (tdep),
+ raw);
fputs_filtered ("0x", file);
for (i = 9; i >= 0; i--)
fprintf_filtered (file, "%s\n", hex_string_custom (fooff, 8));
fprintf_filtered (file, "Opcode: %s\n",
hex_string_custom (fop ? (fop | 0xd800) : 0, 4));
-
-#undef I387_ST0_REGNUM
}
\f
+/* Return nonzero if a value of type TYPE stored in register REGNUM
+ needs any special handling. */
+
+int
+i387_convert_register_p (struct gdbarch *gdbarch, int regnum, struct type *type)
+{
+ if (i386_fp_regnum_p (gdbarch, regnum))
+ {
+ /* Floating point registers must be converted unless we are
+ accessing them in their hardware type. */
+ if (type == builtin_type_i387_ext)
+ return 0;
+ else
+ return 1;
+ }
+
+ return 0;
+}
+
/* Read a value of type TYPE from register REGNUM in frame FRAME, and
return its contents in TO. */
{
gdb_byte from[I386_MAX_REGISTER_SIZE];
- gdb_assert (i386_fp_regnum_p (regnum));
+ gdb_assert (i386_fp_regnum_p (get_frame_arch (frame), regnum));
/* We only support floating-point values. */
if (TYPE_CODE (type) != TYPE_CODE_FLT)
return;
}
- /* Convert to TYPE. This should be a no-op if TYPE is equivalent to
- the extended floating-point format used by the FPU. */
+ /* Convert to TYPE. */
get_frame_register (frame, regnum, from);
convert_typed_floating (from, builtin_type_i387_ext, to, type);
}
{
gdb_byte to[I386_MAX_REGISTER_SIZE];
- gdb_assert (i386_fp_regnum_p (regnum));
+ gdb_assert (i386_fp_regnum_p (get_frame_arch (frame), regnum));
/* We only support floating-point values. */
if (TYPE_CODE (type) != TYPE_CODE_FLT)
return;
}
- /* Convert from TYPE. This should be a no-op if TYPE is equivalent
- to the extended floating-point format used by the FPU. */
+ /* Convert from TYPE. */
convert_typed_floating (from, type, to, builtin_type_i387_ext);
put_frame_register (frame, regnum, to);
}
18 /* `fop' (bottom 11 bits). */
};
-#define FSAVE_ADDR(fsave, regnum) \
- (fsave + fsave_offset[regnum - I387_ST0_REGNUM])
+#define FSAVE_ADDR(tdep, fsave, regnum) \
+ (fsave + fsave_offset[regnum - I387_ST0_REGNUM (tdep)])
\f
/* Fill register REGNUM in REGCACHE with the appropriate value from
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
- /* Define I387_ST0_REGNUM and I387_NUM_XMM_REGS such that we use the
- proper definitions for REGCACHE's architecture. */
-
-#define I387_ST0_REGNUM tdep->st0_regnum
-#define I387_NUM_XMM_REGS tdep->num_xmm_regs
-
- for (i = I387_ST0_REGNUM; i < I387_XMM0_REGNUM; i++)
+ for (i = I387_ST0_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
if (regnum == -1 || regnum == i)
{
if (fsave == NULL)
/* Most of the FPU control registers occupy only 16 bits in the
fsave area. Give those a special treatment. */
- if (i >= I387_FCTRL_REGNUM
- && i != I387_FIOFF_REGNUM && i != I387_FOOFF_REGNUM)
+ if (i >= I387_FCTRL_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
{
gdb_byte val[4];
- memcpy (val, FSAVE_ADDR (regs, i), 2);
+ memcpy (val, FSAVE_ADDR (tdep, regs, i), 2);
val[2] = val[3] = 0;
- if (i == I387_FOP_REGNUM)
+ if (i == I387_FOP_REGNUM (tdep))
val[1] &= ((1 << 3) - 1);
regcache_raw_supply (regcache, i, val);
}
else
- regcache_raw_supply (regcache, i, FSAVE_ADDR (regs, i));
+ regcache_raw_supply (regcache, i, FSAVE_ADDR (tdep, regs, i));
}
/* Provide dummy values for the SSE registers. */
- for (i = I387_XMM0_REGNUM; i < I387_MXCSR_REGNUM; i++)
+ for (i = I387_XMM0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
if (regnum == -1 || regnum == i)
regcache_raw_supply (regcache, i, NULL);
- if (regnum == -1 || regnum == I387_MXCSR_REGNUM)
+ if (regnum == -1 || regnum == I387_MXCSR_REGNUM (tdep))
{
gdb_byte buf[4];
store_unsigned_integer (buf, 4, 0x1f80);
- regcache_raw_supply (regcache, I387_MXCSR_REGNUM, buf);
+ regcache_raw_supply (regcache, I387_MXCSR_REGNUM (tdep), buf);
}
-
-#undef I387_ST0_REGNUM
-#undef I387_NUM_XMM_REGS
}
/* Fill register REGNUM (if it is a floating-point register) in *FSAVE
void
i387_collect_fsave (const struct regcache *regcache, int regnum, void *fsave)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
gdb_byte *regs = fsave;
int i;
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
- /* Define I387_ST0_REGNUM such that we use the proper definitions
- for REGCACHE's architecture. */
-#define I387_ST0_REGNUM tdep->st0_regnum
-
- for (i = I387_ST0_REGNUM; i < I387_XMM0_REGNUM; i++)
+ for (i = I387_ST0_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
if (regnum == -1 || regnum == i)
{
/* Most of the FPU control registers occupy only 16 bits in
the fsave area. Give those a special treatment. */
- if (i >= I387_FCTRL_REGNUM
- && i != I387_FIOFF_REGNUM && i != I387_FOOFF_REGNUM)
+ if (i >= I387_FCTRL_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
{
gdb_byte buf[4];
regcache_raw_collect (regcache, i, buf);
- if (i == I387_FOP_REGNUM)
+ if (i == I387_FOP_REGNUM (tdep))
{
/* The opcode occupies only 11 bits. Make sure we
don't touch the other bits. */
buf[1] &= ((1 << 3) - 1);
- buf[1] |= ((FSAVE_ADDR (regs, i))[1] & ~((1 << 3) - 1));
+ buf[1] |= ((FSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
}
- memcpy (FSAVE_ADDR (regs, i), buf, 2);
+ memcpy (FSAVE_ADDR (tdep, regs, i), buf, 2);
}
else
- regcache_raw_collect (regcache, i, FSAVE_ADDR (regs, i));
+ regcache_raw_collect (regcache, i, FSAVE_ADDR (tdep, regs, i));
}
-#undef I387_ST0_REGNUM
}
\f
160 + 15 * 16, /* ... %xmm15 (128 bits each). */
};
-#define FXSAVE_ADDR(fxsave, regnum) \
- (fxsave + fxsave_offset[regnum - I387_ST0_REGNUM])
+#define FXSAVE_ADDR(tdep, fxsave, regnum) \
+ (fxsave + fxsave_offset[regnum - I387_ST0_REGNUM (tdep)])
/* We made an unfortunate choice in putting %mxcsr after the SSE
registers %xmm0-%xmm7 instead of before, since it makes supporting
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
gdb_assert (tdep->num_xmm_regs > 0);
- /* Define I387_ST0_REGNUM and I387_NUM_XMM_REGS such that we use the
- proper definitions for REGCACHE's architecture. */
-
-#define I387_ST0_REGNUM tdep->st0_regnum
-#define I387_NUM_XMM_REGS tdep->num_xmm_regs
-
- for (i = I387_ST0_REGNUM; i < I387_MXCSR_REGNUM; i++)
+ for (i = I387_ST0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
if (regnum == -1 || regnum == i)
{
if (regs == NULL)
/* Most of the FPU control registers occupy only 16 bits in
the fxsave area. Give those a special treatment. */
- if (i >= I387_FCTRL_REGNUM && i < I387_XMM0_REGNUM
- && i != I387_FIOFF_REGNUM && i != I387_FOOFF_REGNUM)
+ if (i >= I387_FCTRL_REGNUM (tdep) && i < I387_XMM0_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
{
gdb_byte val[4];
- memcpy (val, FXSAVE_ADDR (regs, i), 2);
+ memcpy (val, FXSAVE_ADDR (tdep, regs, i), 2);
val[2] = val[3] = 0;
- if (i == I387_FOP_REGNUM)
+ if (i == I387_FOP_REGNUM (tdep))
val[1] &= ((1 << 3) - 1);
- else if (i== I387_FTAG_REGNUM)
+ else if (i== I387_FTAG_REGNUM (tdep))
{
/* The fxsave area contains a simplified version of
the tag word. We have to look at the actual 80-bit
int fpreg;
int top;
- top = ((FXSAVE_ADDR (regs, I387_FSTAT_REGNUM))[1] >> 3);
+ top = ((FXSAVE_ADDR (tdep, regs,
+ I387_FSTAT_REGNUM (tdep)))[1] >> 3);
top &= 0x7;
for (fpreg = 7; fpreg >= 0; fpreg--)
if (val[0] & (1 << fpreg))
{
- int regnum = (fpreg + 8 - top) % 8 + I387_ST0_REGNUM;
- tag = i387_tag (FXSAVE_ADDR (regs, regnum));
+ int regnum = (fpreg + 8 - top) % 8
+ + I387_ST0_REGNUM (tdep);
+ tag = i387_tag (FXSAVE_ADDR (tdep, regs, regnum));
}
else
tag = 3; /* Empty */
regcache_raw_supply (regcache, i, val);
}
else
- regcache_raw_supply (regcache, i, FXSAVE_ADDR (regs, i));
+ regcache_raw_supply (regcache, i, FXSAVE_ADDR (tdep, regs, i));
}
- if (regnum == I387_MXCSR_REGNUM || regnum == -1)
+ if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
{
if (regs == NULL)
- regcache_raw_supply (regcache, I387_MXCSR_REGNUM, NULL);
+ regcache_raw_supply (regcache, I387_MXCSR_REGNUM (tdep), NULL);
else
- regcache_raw_supply (regcache, I387_MXCSR_REGNUM,
+ regcache_raw_supply (regcache, I387_MXCSR_REGNUM (tdep),
FXSAVE_MXCSR_ADDR (regs));
}
-
-#undef I387_ST0_REGNUM
-#undef I387_NUM_XMM_REGS
}
/* Fill register REGNUM (if it is a floating-point or SSE register) in
void
i387_collect_fxsave (const struct regcache *regcache, int regnum, void *fxsave)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
gdb_byte *regs = fxsave;
int i;
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
gdb_assert (tdep->num_xmm_regs > 0);
- /* Define I387_ST0_REGNUM and I387_NUM_XMM_REGS such that we use the
- proper definitions for REGCACHE's architecture. */
-
-#define I387_ST0_REGNUM tdep->st0_regnum
-#define I387_NUM_XMM_REGS tdep->num_xmm_regs
-
- for (i = I387_ST0_REGNUM; i < I387_MXCSR_REGNUM; i++)
+ for (i = I387_ST0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
if (regnum == -1 || regnum == i)
{
/* Most of the FPU control registers occupy only 16 bits in
the fxsave area. Give those a special treatment. */
- if (i >= I387_FCTRL_REGNUM && i < I387_XMM0_REGNUM
- && i != I387_FIOFF_REGNUM && i != I387_FOOFF_REGNUM)
+ if (i >= I387_FCTRL_REGNUM (tdep) && i < I387_XMM0_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
{
gdb_byte buf[4];
regcache_raw_collect (regcache, i, buf);
- if (i == I387_FOP_REGNUM)
+ if (i == I387_FOP_REGNUM (tdep))
{
/* The opcode occupies only 11 bits. Make sure we
don't touch the other bits. */
buf[1] &= ((1 << 3) - 1);
- buf[1] |= ((FXSAVE_ADDR (regs, i))[1] & ~((1 << 3) - 1));
+ buf[1] |= ((FXSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
}
- else if (i == I387_FTAG_REGNUM)
+ else if (i == I387_FTAG_REGNUM (tdep))
{
/* Converting back is much easier. */
buf[0] |= (1 << fpreg);
}
}
- memcpy (FXSAVE_ADDR (regs, i), buf, 2);
+ memcpy (FXSAVE_ADDR (tdep, regs, i), buf, 2);
}
else
- regcache_raw_collect (regcache, i, FXSAVE_ADDR (regs, i));
+ regcache_raw_collect (regcache, i, FXSAVE_ADDR (tdep, regs, i));
}
- if (regnum == I387_MXCSR_REGNUM || regnum == -1)
- regcache_raw_collect (regcache, I387_MXCSR_REGNUM,
+ if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
+ regcache_raw_collect (regcache, I387_MXCSR_REGNUM (tdep),
FXSAVE_MXCSR_ADDR (regs));
-
-#undef I387_ST0_REGNUM
-#undef I387_NUM_XMM_REGS
}
/* Recreate the FTW (tag word) valid bits from the 80-bit FP data in
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
ULONGEST fstat;
- /* Define I387_ST0_REGNUM such that we use the proper
- definitions for the architecture. */
-#define I387_ST0_REGNUM tdep->st0_regnum
-
/* Set the top of the floating-point register stack to 7. The
actual value doesn't really matter, but 7 is what a normal
function return would end up with if the program started out with
a freshly initialized FPU. */
- regcache_raw_read_unsigned (regcache, I387_FSTAT_REGNUM, &fstat);
+ regcache_raw_read_unsigned (regcache, I387_FSTAT_REGNUM (tdep), &fstat);
fstat |= (7 << 11);
- regcache_raw_write_unsigned (regcache, I387_FSTAT_REGNUM, fstat);
+ regcache_raw_write_unsigned (regcache, I387_FSTAT_REGNUM (tdep), fstat);
/* Mark %st(1) through %st(7) as empty. Since we set the top of the
floating-point register stack to 7, the appropriate value for the
tag word is 0x3fff. */
- regcache_raw_write_unsigned (regcache, I387_FTAG_REGNUM, 0x3fff);
+ regcache_raw_write_unsigned (regcache, I387_FTAG_REGNUM (tdep), 0x3fff);
-#undef I387_ST0_REGNUM
}