#include "gdbcmd.h"
#include "command.h"
#include "gdb_string.h"
+#include "infcall.h"
/* NOTE: cagney/2003-04-16: What's the future of this code?
value_arg_coerce (struct value *arg, struct type *param_type,
int is_prototyped)
{
- register struct type *arg_type = check_typedef (VALUE_TYPE (arg));
- register struct type *type
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ struct type *type
= param_type ? check_typedef (param_type) : arg_type;
switch (TYPE_CODE (type))
/* Determine a function's address and its return type from its value.
Calls error() if the function is not valid for calling. */
-static CORE_ADDR
+CORE_ADDR
find_function_addr (struct value *function, struct type **retval_type)
{
- register struct type *ftype = check_typedef (VALUE_TYPE (function));
- register enum type_code code = TYPE_CODE (ftype);
+ struct type *ftype = check_typedef (VALUE_TYPE (function));
+ enum type_code code = TYPE_CODE (ftype);
struct type *value_type;
CORE_ADDR funaddr;
if (TYPE_CODE (ftype) == TYPE_CODE_FUNC
|| TYPE_CODE (ftype) == TYPE_CODE_METHOD)
{
- funaddr = CONVERT_FROM_FUNC_PTR_ADDR (funaddr);
+ funaddr = gdbarch_convert_from_func_ptr_addr (current_gdbarch,
+ funaddr,
+ ¤t_target);
value_type = TYPE_TARGET_TYPE (ftype);
}
else
breakpoint_auto_delete (*(bpstat *) arg);
}
+static CORE_ADDR
+legacy_push_dummy_code (struct gdbarch *gdbarch,
+ CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc,
+ struct value **args, int nargs,
+ struct type *value_type,
+ CORE_ADDR *real_pc, CORE_ADDR *bp_addr)
+{
+ /* CALL_DUMMY is an array of words (DEPRECATED_REGISTER_SIZE), but
+ each word is in host byte order. Before calling
+ DEPRECATED_FIX_CALL_DUMMY, we byteswap it and remove any extra
+ bytes which might exist because ULONGEST is bigger than
+ DEPRECATED_REGISTER_SIZE. */
+ /* NOTE: This is pretty wierd, as the call dummy is actually a
+ sequence of instructions. But CISC machines will have to pack
+ the instructions into DEPRECATED_REGISTER_SIZE units (and so will
+ RISC machines for which INSTRUCTION_SIZE is not
+ DEPRECATED_REGISTER_SIZE). */
+ /* NOTE: This is pretty stupid. CALL_DUMMY should be in strict
+ target byte order. */
+ CORE_ADDR start_sp;
+ ULONGEST *dummy = alloca (DEPRECATED_SIZEOF_CALL_DUMMY_WORDS);
+ int sizeof_dummy1 = (DEPRECATED_REGISTER_SIZE
+ * DEPRECATED_SIZEOF_CALL_DUMMY_WORDS
+ / sizeof (ULONGEST));
+ char *dummy1 = alloca (sizeof_dummy1);
+ memcpy (dummy, DEPRECATED_CALL_DUMMY_WORDS,
+ DEPRECATED_SIZEOF_CALL_DUMMY_WORDS);
+ if (INNER_THAN (1, 2))
+ {
+ /* Stack grows down */
+ sp -= sizeof_dummy1;
+ start_sp = sp;
+ }
+ else
+ {
+ /* Stack grows up */
+ start_sp = sp;
+ sp += sizeof_dummy1;
+ }
+ /* NOTE: cagney/2002-09-10: Don't bother re-adjusting the stack
+ after allocating space for the call dummy. A target can specify
+ a SIZEOF_DUMMY1 (via DEPRECATED_SIZEOF_CALL_DUMMY_WORDS) such
+ that all local alignment requirements are met. */
+ /* Create a call sequence customized for this function and the
+ number of arguments for it. */
+ {
+ int i;
+ for (i = 0; i < (int) (DEPRECATED_SIZEOF_CALL_DUMMY_WORDS / sizeof (dummy[0]));
+ i++)
+ store_unsigned_integer (&dummy1[i * DEPRECATED_REGISTER_SIZE],
+ DEPRECATED_REGISTER_SIZE,
+ (ULONGEST) dummy[i]);
+ }
+ /* NOTE: cagney/2003-04-22: This computation of REAL_PC, BP_ADDR and
+ DUMMY_ADDR is pretty messed up. It comes from constant tinkering
+ with the values. Instead a DEPRECATED_FIX_CALL_DUMMY replacement
+ (PUSH_DUMMY_BREAKPOINT?) should just do everything. */
+#ifdef GDB_TARGET_IS_HPPA
+ (*real_pc) = DEPRECATED_FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs,
+ args, value_type, using_gcc);
+#else
+ if (DEPRECATED_FIX_CALL_DUMMY_P ())
+ {
+ /* gdb_assert (CALL_DUMMY_LOCATION == ON_STACK) true? */
+ DEPRECATED_FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
+ value_type, using_gcc);
+ }
+ (*real_pc) = start_sp;
+#endif
+ /* Yes, the offset is applied to the real_pc and not the dummy addr.
+ Ulgh! Blame the HP/UX target. */
+ (*bp_addr) = (*real_pc) + DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET;
+ /* Yes, the offset is applied to the real_pc and not the
+ dummy_addr. Ulgh! Blame the HP/UX target. */
+ (*real_pc) += DEPRECATED_CALL_DUMMY_START_OFFSET;
+ write_memory (start_sp, (char *) dummy1, sizeof_dummy1);
+ if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES)
+ generic_save_call_dummy_addr (start_sp, start_sp + sizeof_dummy1);
+ return sp;
+}
+
+static CORE_ADDR
+generic_push_dummy_code (struct gdbarch *gdbarch,
+ CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc,
+ struct value **args, int nargs,
+ struct type *value_type,
+ CORE_ADDR *real_pc, CORE_ADDR *bp_addr)
+{
+ /* Something here to findout the size of a breakpoint and then
+ allocate space for it on the stack. */
+ int bplen;
+ /* This code assumes frame align. */
+ gdb_assert (gdbarch_frame_align_p (gdbarch));
+ /* Force the stack's alignment. The intent is to ensure that the SP
+ is aligned to at least a breakpoint instruction's boundary. */
+ sp = gdbarch_frame_align (gdbarch, sp);
+ /* Allocate space for, and then position the breakpoint on the
+ stack. */
+ if (gdbarch_inner_than (gdbarch, 1, 2))
+ {
+ CORE_ADDR bppc = sp;
+ gdbarch_breakpoint_from_pc (gdbarch, &bppc, &bplen);
+ sp = gdbarch_frame_align (gdbarch, sp - bplen);
+ (*bp_addr) = sp;
+ /* Should the breakpoint size/location be re-computed here? */
+ }
+ else
+ {
+ (*bp_addr) = sp;
+ gdbarch_breakpoint_from_pc (gdbarch, bp_addr, &bplen);
+ sp = gdbarch_frame_align (gdbarch, sp + bplen);
+ }
+ /* Inferior resumes at the function entry point. */
+ (*real_pc) = funaddr;
+ return sp;
+}
+
+/* Provide backward compatibility. Once DEPRECATED_FIX_CALL_DUMMY is
+ eliminated, this can be simplified. */
+
+static CORE_ADDR
+push_dummy_code (struct gdbarch *gdbarch,
+ CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc,
+ struct value **args, int nargs,
+ struct type *value_type,
+ CORE_ADDR *real_pc, CORE_ADDR *bp_addr)
+{
+ if (gdbarch_push_dummy_code_p (gdbarch))
+ return gdbarch_push_dummy_code (gdbarch, sp, funaddr, using_gcc,
+ args, nargs, value_type, real_pc, bp_addr);
+ else if (DEPRECATED_FIX_CALL_DUMMY_P ())
+ return legacy_push_dummy_code (gdbarch, sp, funaddr, using_gcc,
+ args, nargs, value_type, real_pc, bp_addr);
+ else
+ return generic_push_dummy_code (gdbarch, sp, funaddr, using_gcc,
+ args, nargs, value_type, real_pc, bp_addr);
+}
+
/* All this stuff with a dummy frame may seem unnecessarily complicated
(why not just save registers in GDB?). The purpose of pushing a dummy
frame which looks just like a real frame is so that if you call a
struct value *
call_function_by_hand (struct value *function, int nargs, struct value **args)
{
- register CORE_ADDR sp;
+ CORE_ADDR sp;
CORE_ADDR dummy_addr;
struct type *value_type;
unsigned char struct_return;
vector. Hence this direct call.
A follow-on change is to modify this interface so that it takes
- thread OR frame OR tpid as a parameter, and returns a dummy
+ thread OR frame OR ptid as a parameter, and returns a dummy
frame handle. The handle can then be used further down as a
- parameter SAVE_DUMMY_FRAME_TOS. Hmm, thinking about it, since
- everything is ment to be using generic dummy frames, why not
- even use some of the dummy frame code to here - do a regcache
- dup and then pass the duped regcache, along with all the other
- stuff, at one single point.
+ parameter to generic_save_dummy_frame_tos(). Hmm, thinking
+ about it, since everything is ment to be using generic dummy
+ frames, why not even use some of the dummy frame code to here -
+ do a regcache dup and then pass the duped regcache, along with
+ all the other stuff, at one single point.
In fact, you can even save the structure's return address in the
dummy frame and fix one of those nasty lost struct return edge
CORE_ADDR old_sp = read_sp ();
if (gdbarch_frame_align_p (current_gdbarch))
{
+ sp = gdbarch_frame_align (current_gdbarch, old_sp);
+ /* NOTE: cagney/2003-08-13: Skip the "red zone". For some
+ ABIs, a function can use memory beyond the inner most stack
+ address. AMD64 called that region the "red zone". Skip at
+ least the "red zone" size before allocating any space on
+ the stack. */
+ if (INNER_THAN (1, 2))
+ sp -= gdbarch_frame_red_zone_size (current_gdbarch);
+ else
+ sp += gdbarch_frame_red_zone_size (current_gdbarch);
+ /* Still aligned? */
+ gdb_assert (sp == gdbarch_frame_align (current_gdbarch, sp));
/* NOTE: cagney/2002-09-18:
On a RISC architecture, a void parameterless generic dummy
frame (i.e., no parameters, no result) typically does not
need to push anything the stack and hence can leave SP and
- FP. Similarly, a framelss (possibly leaf) function does
+ FP. Similarly, a frameless (possibly leaf) function does
not push anything on the stack and, hence, that too can
leave FP and SP unchanged. As a consequence, a sequence of
void parameterless generic dummy frame calls to frameless
stack. That way, two dummy frames can never be identical.
It does burn a few bytes of stack but that is a small price
to pay :-). */
- sp = gdbarch_frame_align (current_gdbarch, old_sp);
if (sp == old_sp)
{
if (INNER_THAN (1, 2))
|| (INNER_THAN (2, 1) && sp >= old_sp));
}
else
- /* FIXME: cagney/2002-09-18: Hey, you loose! Who knows how
- badly aligned the SP is! Further, per comment above, if the
- generic dummy frame ends up empty (because nothing is pushed)
- GDB won't be able to correctly perform back traces. If a
- target is having trouble with backtraces, first thing to do
- is add FRAME_ALIGN() to its architecture vector. After that,
- try adding SAVE_DUMMY_FRAME_TOS() and modifying
- DEPRECATED_FRAME_CHAIN so that when the next outer frame is a
- generic dummy, it returns the current frame's base. */
+ /* FIXME: cagney/2002-09-18: Hey, you loose!
+
+ Who knows how badly aligned the SP is!
+
+ If the generic dummy frame ends up empty (because nothing is
+ pushed) GDB won't be able to correctly perform back traces.
+ If a target is having trouble with backtraces, first thing to
+ do is add FRAME_ALIGN() to the architecture vector. If that
+ fails, try unwind_dummy_id().
+
+ If the ABI specifies a "Red Zone" (see the doco) the code
+ below will quietly trash it. */
sp = old_sp;
}
/* Are we returning a value using a structure return or a normal
value return? */
- struct_return = using_struct_return (function, funaddr, value_type,
- using_gcc);
+ struct_return = using_struct_return (value_type, using_gcc);
+
+ /* Determine the location of the breakpoint (and possibly other
+ stuff) that the called function will return to. The SPARC, for a
+ function returning a structure or union, needs to make space for
+ not just the breakpoint but also an extra word containing the
+ size (?) of the structure being passed. */
+
+ /* The actual breakpoint (at BP_ADDR) is inserted separatly so there
+ is no need to write that out. */
switch (CALL_DUMMY_LOCATION)
{
case ON_STACK:
- {
- /* CALL_DUMMY is an array of words (REGISTER_SIZE), but each
- word is in host byte order. Before calling FIX_CALL_DUMMY,
- we byteswap it and remove any extra bytes which might exist
- because ULONGEST is bigger than REGISTER_SIZE. */
- /* NOTE: This is pretty wierd, as the call dummy is actually a
- sequence of instructions. But CISC machines will have to
- pack the instructions into REGISTER_SIZE units (and so will
- RISC machines for which INSTRUCTION_SIZE is not
- REGISTER_SIZE). */
- /* NOTE: This is pretty stupid. CALL_DUMMY should be in
- strict target byte order. */
- CORE_ADDR start_sp;
- ULONGEST *dummy = alloca (SIZEOF_CALL_DUMMY_WORDS);
- int sizeof_dummy1 = (REGISTER_SIZE * SIZEOF_CALL_DUMMY_WORDS
- / sizeof (ULONGEST));
- char *dummy1 = alloca (sizeof_dummy1);
- memcpy (dummy, CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS);
- if (INNER_THAN (1, 2))
- {
- /* Stack grows down */
- sp -= sizeof_dummy1;
- start_sp = sp;
- }
- else
- {
- /* Stack grows up */
- start_sp = sp;
- sp += sizeof_dummy1;
- }
- /* NOTE: cagney/2002-09-10: Don't bother re-adjusting the
- stack after allocating space for the call dummy. A target
- can specify a SIZEOF_DUMMY1 (via SIZEOF_CALL_DUMMY_WORDS)
- such that all local alignment requirements are met. */
- /* Create a call sequence customized for this function and the
- number of arguments for it. */
+ /* "dummy_addr" is here just to keep old targets happy. New
+ targets return that same information via "sp" and "bp_addr". */
+ if (INNER_THAN (1, 2))
{
- int i;
- for (i = 0; i < (int) (SIZEOF_CALL_DUMMY_WORDS / sizeof (dummy[0]));
- i++)
- store_unsigned_integer (&dummy1[i * REGISTER_SIZE],
- REGISTER_SIZE,
- (ULONGEST) dummy[i]);
+ sp = push_dummy_code (current_gdbarch, sp, funaddr,
+ using_gcc, args, nargs, value_type,
+ &real_pc, &bp_addr);
+ dummy_addr = sp;
}
- /* NOTE: cagney/2003-04-22: This computation of REAL_PC,
- BP_ADDR and DUMMY_ADDR is pretty messed up. It comes from
- constant tinkering with the values. Instead a
- FIX_CALL_DUMMY replacement (PUSH_DUMMY_BREAKPOINT?) should
- just do everything. */
-#ifdef GDB_TARGET_IS_HPPA
- real_pc = FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
- value_type, using_gcc);
-#else
- if (FIX_CALL_DUMMY_P ())
- {
- /* gdb_assert (CALL_DUMMY_LOCATION == ON_STACK) true? */
- FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args, value_type,
- using_gcc);
- }
- real_pc = start_sp;
-#endif
- dummy_addr = start_sp;
- /* Yes, the offset is applied to the real_pc and not the dummy
- addr. Ulgh! Blame the HP/UX target. */
- bp_addr = real_pc + CALL_DUMMY_BREAKPOINT_OFFSET;
- /* Yes, the offset is applied to the real_pc and not the
- dummy_addr. Ulgh! Blame the HP/UX target. */
- real_pc += CALL_DUMMY_START_OFFSET;
- write_memory (start_sp, (char *) dummy1, sizeof_dummy1);
- if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES)
- generic_save_call_dummy_addr (start_sp, start_sp + sizeof_dummy1);
- break;
- }
+ else
+ {
+ dummy_addr = sp;
+ sp = push_dummy_code (current_gdbarch, sp, funaddr,
+ using_gcc, args, nargs, value_type,
+ &real_pc, &bp_addr);
+ }
+ break;
case AT_ENTRY_POINT:
+ if (DEPRECATED_FIX_CALL_DUMMY_P ())
+ {
+ /* Sigh. Some targets use DEPRECATED_FIX_CALL_DUMMY to
+ shove extra stuff onto the stack or into registers. That
+ code should be in PUSH_DUMMY_CALL, however, in the mean
+ time ... */
+ /* If the target is manipulating DUMMY1, it looses big time. */
+ void *dummy1 = NULL;
+ DEPRECATED_FIX_CALL_DUMMY (dummy1, sp, funaddr, nargs, args,
+ value_type, using_gcc);
+ }
real_pc = funaddr;
- dummy_addr = CALL_DUMMY_ADDRESS ();
+ dummy_addr = entry_point_address ();
+ if (DEPRECATED_CALL_DUMMY_ADDRESS_P ())
+ /* Override it. */
+ dummy_addr = DEPRECATED_CALL_DUMMY_ADDRESS ();
+ /* Make certain that the address points at real code, and not a
+ function descriptor. */
+ dummy_addr = gdbarch_convert_from_func_ptr_addr (current_gdbarch,
+ dummy_addr,
+ ¤t_target);
/* A call dummy always consists of just a single breakpoint, so
it's address is the same as the address of the dummy. */
bp_addr = dummy_addr;
- if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES)
- /* NOTE: cagney/2002-04-13: The entry point is going to be
- modified with a single breakpoint. */
- generic_save_call_dummy_addr (CALL_DUMMY_ADDRESS (),
- CALL_DUMMY_ADDRESS () + 1);
break;
+ case AT_SYMBOL:
+ /* Some executables define a symbol __CALL_DUMMY_ADDRESS whose
+ address is the location where the breakpoint should be
+ placed. Once all targets are using the overhauled frame code
+ this can be deleted - ON_STACK is a better option. */
+ {
+ struct minimal_symbol *sym;
+
+ sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL);
+ real_pc = funaddr;
+ if (sym)
+ dummy_addr = SYMBOL_VALUE_ADDRESS (sym);
+ else
+ dummy_addr = entry_point_address ();
+ /* Make certain that the address points at real code, and not
+ a function descriptor. */
+ dummy_addr = gdbarch_convert_from_func_ptr_addr (current_gdbarch,
+ dummy_addr,
+ ¤t_target);
+ /* A call dummy always consists of just a single breakpoint,
+ so it's address is the same as the address of the dummy. */
+ bp_addr = dummy_addr;
+ break;
+ }
default:
internal_error (__FILE__, __LINE__, "bad switch");
}
+ if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES)
+ /* Save where the breakpoint is going to be inserted so that the
+ dummy-frame code is later able to re-identify it. */
+ generic_save_call_dummy_addr (bp_addr, bp_addr + 1);
+
if (nargs < TYPE_NFIELDS (ftype))
error ("too few arguments in function call");
}
}
- if (REG_STRUCT_HAS_ADDR_P ())
+ if (DEPRECATED_REG_STRUCT_HAS_ADDR_P ())
{
int i;
/* This is a machine like the sparc, where we may need to pass a
|| (TYPE_CODE (arg_type) == TYPE_CODE_FLT
&& TYPE_LENGTH (arg_type) > 8)
)
- && REG_STRUCT_HAS_ADDR (using_gcc, arg_type))
+ && DEPRECATED_REG_STRUCT_HAS_ADDR (using_gcc, arg_type))
{
CORE_ADDR addr;
int len; /* = TYPE_LENGTH (arg_type); */
arg_type = check_typedef (VALUE_ENCLOSING_TYPE (args[i]));
len = TYPE_LENGTH (arg_type);
- if (STACK_ALIGN_P ())
+ if (DEPRECATED_STACK_ALIGN_P ())
/* MVS 11/22/96: I think at least some of this
stack_align code is really broken. Better to let
PUSH_ARGUMENTS adjust the stack in a target-defined
manner. */
- aligned_len = STACK_ALIGN (len);
+ aligned_len = DEPRECATED_STACK_ALIGN (len);
else
aligned_len = len;
if (INNER_THAN (1, 2))
if (struct_return)
{
int len = TYPE_LENGTH (value_type);
- if (STACK_ALIGN_P ())
+ if (DEPRECATED_STACK_ALIGN_P ())
/* NOTE: cagney/2003-03-22: Should rely on frame align, rather
than stack align to force the alignment of the stack. */
- len = STACK_ALIGN (len);
+ len = DEPRECATED_STACK_ALIGN (len);
if (INNER_THAN (1, 2))
{
/* Stack grows downward. Align STRUCT_ADDR and SP after
/* elz: on HPPA no need for this extra alignment, maybe it is needed
on other architectures. This is because all the alignment is
- taken care of in the above code (ifdef REG_STRUCT_HAS_ADDR) and
- in hppa_push_arguments */
+ taken care of in the above code (ifdef DEPRECATED_REG_STRUCT_HAS_ADDR)
+ and in hppa_push_arguments */
/* NOTE: cagney/2003-03-24: The below code is very broken. Given an
odd sized parameter the below will mis-align the stack. As was
suggested back in '96, better to let PUSH_ARGUMENTS handle it. */
/* MVS 11/22/96: I think at least some of this stack_align code
is really broken. Better to let push_dummy_call() adjust the
stack in a target-defined manner. */
- if (STACK_ALIGN_P () && INNER_THAN (1, 2))
+ if (DEPRECATED_STACK_ALIGN_P () && INNER_THAN (1, 2))
{
/* If stack grows down, we must leave a hole at the top. */
int len = 0;
len += TYPE_LENGTH (VALUE_ENCLOSING_TYPE (args[i]));
if (DEPRECATED_CALL_DUMMY_STACK_ADJUST_P ())
len += DEPRECATED_CALL_DUMMY_STACK_ADJUST;
- sp -= STACK_ALIGN (len) - len;
+ sp -= DEPRECATED_STACK_ALIGN (len) - len;
}
}
/* When there is no push_dummy_call method, should this code
simply error out. That would the implementation of this method
for all ABIs (which is probably a good thing). */
- sp = gdbarch_push_dummy_call (current_gdbarch, current_regcache,
- dummy_addr, nargs, args, sp, struct_return,
+ sp = gdbarch_push_dummy_call (current_gdbarch, funaddr, current_regcache,
+ bp_addr, nargs, args, sp, struct_return,
struct_addr);
else if (DEPRECATED_PUSH_ARGUMENTS_P ())
/* Keep old targets working. */
handled any alignment issues, the code below is entirely
redundant. */
if (!gdbarch_push_dummy_call_p (current_gdbarch)
- && STACK_ALIGN_P () && !INNER_THAN (1, 2))
+ && DEPRECATED_STACK_ALIGN_P () && !INNER_THAN (1, 2))
{
/* If stack grows up, we must leave a hole at the bottom, note
that sp already has been advanced for the arguments! */
if (DEPRECATED_CALL_DUMMY_STACK_ADJUST_P ())
sp += DEPRECATED_CALL_DUMMY_STACK_ADJUST;
- sp = STACK_ALIGN (sp);
+ sp = DEPRECATED_STACK_ALIGN (sp);
}
/* XXX This seems wrong. For stacks that grow down we shouldn't do
if (struct_return && DEPRECATED_STORE_STRUCT_RETURN_P ())
DEPRECATED_STORE_STRUCT_RETURN (struct_addr, sp);
- /* Write the stack pointer. This is here because the statements above
- might fool with it. On SPARC, this write also stores the register
- window into the right place in the new stack frame, which otherwise
- wouldn't happen. (See store_inferior_registers in sparc-nat.c.) */
- /* NOTE: cagney/2003-03-23: Disable this code when there is a
- push_dummy_call() method. Since that method will have already
- stored the stack pointer (as part of creating the fake call
- frame), and none of the code following that code adjusts the
- stack-pointer value, the below call is entirely redundant. */
+ /* Write the stack pointer. This is here because the statements
+ above might fool with it. On SPARC, this write also stores the
+ register window into the right place in the new stack frame,
+ which otherwise wouldn't happen (see store_inferior_registers in
+ sparc-nat.c). */
+ /* NOTE: cagney/2003-03-23: Since the architecture method
+ push_dummy_call() should have already stored the stack pointer
+ (as part of creating the fake call frame), and none of the code
+ following that call adjusts the stack-pointer value, the below
+ call is entirely redundant. */
if (DEPRECATED_DUMMY_WRITE_SP_P ())
DEPRECATED_DUMMY_WRITE_SP (sp);
- if (SAVE_DUMMY_FRAME_TOS_P ())
- SAVE_DUMMY_FRAME_TOS (sp);
+ if (gdbarch_unwind_dummy_id_p (current_gdbarch))
+ {
+ /* Sanity. The exact same SP value is returned by
+ PUSH_DUMMY_CALL, saved as the dummy-frame TOS, and used by
+ unwind_dummy_id to form the frame ID's stack address. */
+ gdb_assert (DEPRECATED_USE_GENERIC_DUMMY_FRAMES);
+ generic_save_dummy_frame_tos (sp);
+ }
+ else if (DEPRECATED_SAVE_DUMMY_FRAME_TOS_P ())
+ DEPRECATED_SAVE_DUMMY_FRAME_TOS (sp);
/* Now proceed, having reached the desired place. */
clear_proceed_status ();
sal.section = find_pc_overlay (sal.pc);
/* Set up a frame ID for the dummy frame so we can pass it to
set_momentary_breakpoint. We need to give the breakpoint a
- frame ID so that the breakpoint code can correctly
- re-identify the dummy breakpoint. */
- frame = frame_id_build (read_fp (), sal.pc);
+ frame ID so that the breakpoint code can correctly re-identify
+ the dummy breakpoint. */
+ if (gdbarch_unwind_dummy_id_p (current_gdbarch))
+ {
+ /* Sanity. The exact same SP value is returned by
+ PUSH_DUMMY_CALL, saved as the dummy-frame TOS, and used by
+ unwind_dummy_id to form the frame ID's stack address. */
+ gdb_assert (DEPRECATED_USE_GENERIC_DUMMY_FRAMES);
+ frame = frame_id_build (sp, sal.pc);
+ }
+ else
+ {
+ /* The assumption here is that push_dummy_call() returned the
+ stack part of the frame ID. Unfortunately, many older
+ architectures were, via a convoluted mess, relying on the
+ poorly defined and greatly overloaded
+ DEPRECATED_TARGET_READ_FP or DEPRECATED_FP_REGNUM to supply
+ the value. */
+ if (DEPRECATED_TARGET_READ_FP_P ())
+ frame = frame_id_build (DEPRECATED_TARGET_READ_FP (), sal.pc);
+ else if (DEPRECATED_FP_REGNUM >= 0)
+ frame = frame_id_build (read_register (DEPRECATED_FP_REGNUM), sal.pc);
+ else
+ frame = frame_id_build (sp, sal.pc);
+ }
bpt = set_momentary_breakpoint (sal, frame, bp_call_dummy);
bpt->disposition = disp_del;
}
if (stopped_by_random_signal || !stop_stack_dummy)
{
/* Find the name of the function we're about to complain about. */
- char *name = NULL;
+ const char *name = NULL;
{
struct symbol *symbol = find_pc_function (funaddr);
if (symbol)
if (msymbol)
name = SYMBOL_PRINT_NAME (msymbol);
}
+ if (name == NULL)
+ {
+ /* Can't use a cleanup here. It is discarded, instead use
+ an alloca. */
+ char *tmp = xstrprintf ("at %s", local_hex_string (funaddr));
+ char *a = alloca (strlen (tmp) + 1);
+ strcpy (a, tmp);
+ xfree (tmp);
+ name = a;
+ }
}
- if (name == NULL)
- {
- /* NOTE: cagney/2003-04-23: Don't blame me. This code dates
- back to 1993-07-08, I simply moved it. */
- char format[80];
- sprintf (format, "at %s", local_hex_format ());
- name = alloca (80);
- /* FIXME-32x64: assumes funaddr fits in a long. */
- sprintf (name, format, (unsigned long) funaddr);
- }
if (stopped_by_random_signal)
{
/* We stopped inside the FUNCTION because of a random
do_cleanups (inf_status_cleanup);
/* Figure out the value returned by the function. */
- /* elz: I defined this new macro for the hppa architecture only.
- this gives us a way to get the value returned by the function
- from the stack, at the same address we told the function to put
- it. We cannot assume on the pa that r28 still contains the
- address of the returned structure. Usually this will be
- overwritten by the callee. I don't know about other
- architectures, so I defined this macro */
-#ifdef VALUE_RETURNED_FROM_STACK
if (struct_return)
{
- do_cleanups (retbuf_cleanup);
- return VALUE_RETURNED_FROM_STACK (value_type, struct_addr);
- }
-#endif
- /* NOTE: cagney/2002-09-10: Only when the stack has been correctly
- aligned (using frame_align()) do we can trust STRUCT_ADDR and
- fetch the return value direct from the stack. This lack of trust
- comes about because legacy targets have a nasty habit of
- silently, and local to PUSH_ARGUMENTS(), moving STRUCT_ADDR. For
- such targets, just hope that value_being_returned() can find the
- adjusted value. */
- if (struct_return && gdbarch_frame_align_p (current_gdbarch))
- {
+ /* NOTE: cagney/2003-09-27: This assumes that PUSH_DUMMY_CALL
+ has correctly stored STRUCT_ADDR in the target. In the past
+ that hasn't been the case, the old MIPS PUSH_ARGUMENTS
+ (PUSH_DUMMY_CALL precursor) would silently move the location
+ of the struct return value making STRUCT_ADDR bogus. If
+ you're seeing problems with values being returned using the
+ "struct return convention", check that PUSH_DUMMY_CALL isn't
+ playing tricks. */
struct value *retval = value_at (value_type, struct_addr, NULL);
do_cleanups (retbuf_cleanup);
return retval;
}
else
{
- struct value *retval = value_being_returned (value_type, retbuf,
- struct_return);
+ /* The non-register case was handled above. */
+ struct value *retval = register_value_being_returned (value_type,
+ retbuf);
do_cleanups (retbuf_cleanup);
return retval;
}