#include "command.h"
#include "gdb_string.h"
#include "infcall.h"
+#include "dummy-frame.h"
/* NOTE: cagney/2003-04-16: What's the future of this code?
else
error ("Invalid data type for function to be called.");
- *retval_type = value_type;
- return funaddr;
+ if (retval_type != NULL)
+ *retval_type = value_type;
+ return funaddr + DEPRECATED_FUNCTION_START_OFFSET;
}
/* Call breakpoint_auto_delete on the current contents of the bpstat
breakpoint_auto_delete (*(bpstat *) arg);
}
-static CORE_ADDR
-legacy_push_dummy_code (struct gdbarch *gdbarch,
- CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc,
- struct value **args, int nargs,
- struct type *value_type,
- CORE_ADDR *real_pc, CORE_ADDR *bp_addr)
-{
- /* CALL_DUMMY is an array of words (DEPRECATED_REGISTER_SIZE), but
- each word is in host byte order. Before calling
- DEPRECATED_FIX_CALL_DUMMY, we byteswap it and remove any extra
- bytes which might exist because ULONGEST is bigger than
- DEPRECATED_REGISTER_SIZE. */
- /* NOTE: This is pretty wierd, as the call dummy is actually a
- sequence of instructions. But CISC machines will have to pack
- the instructions into DEPRECATED_REGISTER_SIZE units (and so will
- RISC machines for which INSTRUCTION_SIZE is not
- DEPRECATED_REGISTER_SIZE). */
- /* NOTE: This is pretty stupid. CALL_DUMMY should be in strict
- target byte order. */
- CORE_ADDR start_sp;
- ULONGEST *dummy = alloca (DEPRECATED_SIZEOF_CALL_DUMMY_WORDS);
- int sizeof_dummy1 = (DEPRECATED_REGISTER_SIZE
- * DEPRECATED_SIZEOF_CALL_DUMMY_WORDS
- / sizeof (ULONGEST));
- char *dummy1 = alloca (sizeof_dummy1);
- memcpy (dummy, DEPRECATED_CALL_DUMMY_WORDS,
- DEPRECATED_SIZEOF_CALL_DUMMY_WORDS);
- if (INNER_THAN (1, 2))
- {
- /* Stack grows down */
- sp -= sizeof_dummy1;
- start_sp = sp;
- }
- else
- {
- /* Stack grows up */
- start_sp = sp;
- sp += sizeof_dummy1;
- }
- /* NOTE: cagney/2002-09-10: Don't bother re-adjusting the stack
- after allocating space for the call dummy. A target can specify
- a SIZEOF_DUMMY1 (via DEPRECATED_SIZEOF_CALL_DUMMY_WORDS) such
- that all local alignment requirements are met. */
- /* Create a call sequence customized for this function and the
- number of arguments for it. */
- {
- int i;
- for (i = 0; i < (int) (DEPRECATED_SIZEOF_CALL_DUMMY_WORDS / sizeof (dummy[0]));
- i++)
- store_unsigned_integer (&dummy1[i * DEPRECATED_REGISTER_SIZE],
- DEPRECATED_REGISTER_SIZE,
- (ULONGEST) dummy[i]);
- }
- /* NOTE: cagney/2003-04-22: This computation of REAL_PC, BP_ADDR and
- DUMMY_ADDR is pretty messed up. It comes from constant tinkering
- with the values. Instead a DEPRECATED_FIX_CALL_DUMMY replacement
- (PUSH_DUMMY_BREAKPOINT?) should just do everything. */
- if (!gdbarch_push_dummy_call_p (current_gdbarch))
- {
-#ifdef GDB_TARGET_IS_HPPA
- (*real_pc) = DEPRECATED_FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs,
- args, value_type, using_gcc);
-#else
- if (DEPRECATED_FIX_CALL_DUMMY_P ())
- {
- /* gdb_assert (CALL_DUMMY_LOCATION == ON_STACK) true? */
- DEPRECATED_FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
- value_type, using_gcc);
- }
- (*real_pc) = start_sp;
-#endif
- }
- /* Yes, the offset is applied to the real_pc and not the dummy addr.
- Ulgh! Blame the HP/UX target. */
- (*bp_addr) = (*real_pc) + DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET;
- /* Yes, the offset is applied to the real_pc and not the
- dummy_addr. Ulgh! Blame the HP/UX target. */
- (*real_pc) += DEPRECATED_CALL_DUMMY_START_OFFSET;
- write_memory (start_sp, (char *) dummy1, sizeof_dummy1);
- if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES)
- generic_save_call_dummy_addr (start_sp, start_sp + sizeof_dummy1);
- return sp;
-}
-
static CORE_ADDR
generic_push_dummy_code (struct gdbarch *gdbarch,
CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc,
return sp;
}
-/* Provide backward compatibility. Once DEPRECATED_FIX_CALL_DUMMY is
- eliminated, this can be simplified. */
+/* For CALL_DUMMY_ON_STACK, push a breakpoint sequence that the called
+ function returns to. */
static CORE_ADDR
push_dummy_code (struct gdbarch *gdbarch,
if (gdbarch_push_dummy_code_p (gdbarch))
return gdbarch_push_dummy_code (gdbarch, sp, funaddr, using_gcc,
args, nargs, value_type, real_pc, bp_addr);
- else if (DEPRECATED_FIX_CALL_DUMMY_P ()
- && !gdbarch_push_dummy_call_p (gdbarch))
- return legacy_push_dummy_code (gdbarch, sp, funaddr, using_gcc,
- args, nargs, value_type, real_pc, bp_addr);
else
return generic_push_dummy_code (gdbarch, sp, funaddr, using_gcc,
args, nargs, value_type, real_pc, bp_addr);
CORE_ADDR real_pc;
struct type *ftype = check_typedef (SYMBOL_TYPE (function));
CORE_ADDR bp_addr;
+ struct regcache *caller_regcache;
+ struct cleanup *caller_regcache_cleanup;
+ struct frame_id dummy_id;
if (!target_has_execution)
noprocess ();
inf_status = save_inferior_status (1);
inf_status_cleanup = make_cleanup_restore_inferior_status (inf_status);
- if (DEPRECATED_PUSH_DUMMY_FRAME_P ())
- {
- /* DEPRECATED_PUSH_DUMMY_FRAME is responsible for saving the
- inferior registers (and frame_pop() for restoring them). (At
- least on most machines) they are saved on the stack in the
- inferior. */
- DEPRECATED_PUSH_DUMMY_FRAME;
- }
- else
- {
- /* FIXME: cagney/2003-02-26: Step zero of this little tinker is
- to extract the generic dummy frame code from the architecture
- vector. Hence this direct call.
-
- A follow-on change is to modify this interface so that it takes
- thread OR frame OR ptid as a parameter, and returns a dummy
- frame handle. The handle can then be used further down as a
- parameter to generic_save_dummy_frame_tos(). Hmm, thinking
- about it, since everything is ment to be using generic dummy
- frames, why not even use some of the dummy frame code to here -
- do a regcache dup and then pass the duped regcache, along with
- all the other stuff, at one single point.
-
- In fact, you can even save the structure's return address in the
- dummy frame and fix one of those nasty lost struct return edge
- conditions. */
- generic_push_dummy_frame ();
- }
+ /* Save the caller's registers so that they can be restored once the
+ callee returns. To allow nested calls the registers are (further
+ down) pushed onto a dummy frame stack. Include a cleanup (which
+ is tossed once the regcache has been pushed). */
+ caller_regcache = frame_save_as_regcache (get_current_frame ());
+ caller_regcache_cleanup = make_cleanup_regcache_xfree (caller_regcache);
/* Ensure that the initial SP is correctly aligned. */
{
}
break;
case AT_ENTRY_POINT:
- if (DEPRECATED_FIX_CALL_DUMMY_P ()
- && !gdbarch_push_dummy_call_p (current_gdbarch))
- {
- /* Sigh. Some targets use DEPRECATED_FIX_CALL_DUMMY to
- shove extra stuff onto the stack or into registers. That
- code should be in PUSH_DUMMY_CALL, however, in the mean
- time ... */
- /* If the target is manipulating DUMMY1, it looses big time. */
- void *dummy1 = NULL;
- DEPRECATED_FIX_CALL_DUMMY (dummy1, sp, funaddr, nargs, args,
- value_type, using_gcc);
- }
real_pc = funaddr;
dummy_addr = entry_point_address ();
/* Make certain that the address points at real code, and not a
internal_error (__FILE__, __LINE__, "bad switch");
}
- if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES)
- /* Save where the breakpoint is going to be inserted so that the
- dummy-frame code is later able to re-identify it. */
- generic_save_call_dummy_addr (bp_addr, bp_addr + 1);
-
if (nargs < TYPE_NFIELDS (ftype))
error ("too few arguments in function call");
arg_type = check_typedef (VALUE_ENCLOSING_TYPE (args[i]));
len = TYPE_LENGTH (arg_type);
- if (DEPRECATED_STACK_ALIGN_P ())
- /* MVS 11/22/96: I think at least some of this
- stack_align code is really broken. Better to let
- PUSH_ARGUMENTS adjust the stack in a target-defined
- manner. */
- aligned_len = DEPRECATED_STACK_ALIGN (len);
- else
- aligned_len = len;
+ aligned_len = len;
if (INNER_THAN (1, 2))
{
/* stack grows downward */
if (struct_return)
{
int len = TYPE_LENGTH (value_type);
- if (DEPRECATED_STACK_ALIGN_P ())
- /* NOTE: cagney/2003-03-22: Should rely on frame align, rather
- than stack align to force the alignment of the stack. */
- len = DEPRECATED_STACK_ALIGN (len);
if (INNER_THAN (1, 2))
{
/* Stack grows downward. Align STRUCT_ADDR and SP after
/* When there is no push_dummy_call method, should this code
simply error out. That would the implementation of this method
for all ABIs (which is probably a good thing). */
- sp = gdbarch_push_dummy_call (current_gdbarch, funaddr, current_regcache,
+ sp = gdbarch_push_dummy_call (current_gdbarch, function, current_regcache,
bp_addr, nargs, args, sp, struct_return,
struct_addr);
else if (DEPRECATED_PUSH_ARGUMENTS_P ())
sp = DEPRECATED_PUSH_ARGUMENTS (nargs, args, sp, struct_return,
struct_addr);
else
- sp = legacy_push_arguments (nargs, args, sp, struct_return, struct_addr);
-
- if (DEPRECATED_PUSH_RETURN_ADDRESS_P ())
- /* for targets that use no CALL_DUMMY */
- /* There are a number of targets now which actually don't write
- any CALL_DUMMY instructions into the target, but instead just
- save the machine state, push the arguments, and jump directly
- to the callee function. Since this doesn't actually involve
- executing a JSR/BSR instruction, the return address must be set
- up by hand, either by pushing onto the stack or copying into a
- return-address register as appropriate. Formerly this has been
- done in PUSH_ARGUMENTS, but that's overloading its
- functionality a bit, so I'm making it explicit to do it here. */
- /* NOTE: cagney/2003-04-22: The first parameter ("real_pc") has
- been replaced with zero, it turns out that no implementation
- used that parameter. This occured because the value being
- supplied - the address of the called function's entry point
- instead of the address of the breakpoint that the called
- function should return to - wasn't useful. */
- sp = DEPRECATED_PUSH_RETURN_ADDRESS (0, sp);
-
- /* NOTE: cagney/2003-03-23: Diable this code when there is a
- push_dummy_call() method. Since that method will have already
- handled any alignment issues, the code below is entirely
- redundant. */
- if (!gdbarch_push_dummy_call_p (current_gdbarch)
- && DEPRECATED_STACK_ALIGN_P () && !INNER_THAN (1, 2))
- {
- /* If stack grows up, we must leave a hole at the bottom, note
- that sp already has been advanced for the arguments! */
- sp = DEPRECATED_STACK_ALIGN (sp);
- }
+ error ("This target does not support function calls");
- /* Store the address at which the structure is supposed to be
- written. */
- /* NOTE: 2003-03-24: Since PUSH_ARGUMENTS can (and typically does)
- store the struct return address, this call is entirely redundant. */
- if (struct_return && DEPRECATED_STORE_STRUCT_RETURN_P ())
- DEPRECATED_STORE_STRUCT_RETURN (struct_addr, sp);
-
- /* Write the stack pointer. This is here because the statements
- above might fool with it. On SPARC, this write also stores the
- register window into the right place in the new stack frame,
- which otherwise wouldn't happen (see store_inferior_registers in
- sparc-nat.c). */
- /* NOTE: cagney/2003-03-23: Since the architecture method
- push_dummy_call() should have already stored the stack pointer
- (as part of creating the fake call frame), and none of the code
- following that call adjusts the stack-pointer value, the below
- call is entirely redundant. */
- if (DEPRECATED_DUMMY_WRITE_SP_P ())
- DEPRECATED_DUMMY_WRITE_SP (sp);
-
- if (gdbarch_unwind_dummy_id_p (current_gdbarch))
- {
- /* Sanity. The exact same SP value is returned by
- PUSH_DUMMY_CALL, saved as the dummy-frame TOS, and used by
- unwind_dummy_id to form the frame ID's stack address. */
- gdb_assert (DEPRECATED_USE_GENERIC_DUMMY_FRAMES);
- generic_save_dummy_frame_tos (sp);
- }
- else if (DEPRECATED_SAVE_DUMMY_FRAME_TOS_P ())
- DEPRECATED_SAVE_DUMMY_FRAME_TOS (sp);
+ /* Set up a frame ID for the dummy frame so we can pass it to
+ set_momentary_breakpoint. We need to give the breakpoint a frame
+ ID so that the breakpoint code can correctly re-identify the
+ dummy breakpoint. */
+ /* Sanity. The exact same SP value is returned by PUSH_DUMMY_CALL,
+ saved as the dummy-frame TOS, and used by unwind_dummy_id to form
+ the frame ID's stack address. */
+ dummy_id = frame_id_build (sp, bp_addr);
- /* Now proceed, having reached the desired place. */
- clear_proceed_status ();
-
/* Create a momentary breakpoint at the return address of the
inferior. That way it breaks when it returns. */
{
struct breakpoint *bpt;
struct symtab_and_line sal;
- struct frame_id frame;
init_sal (&sal); /* initialize to zeroes */
sal.pc = bp_addr;
sal.section = find_pc_overlay (sal.pc);
- /* Set up a frame ID for the dummy frame so we can pass it to
- set_momentary_breakpoint. We need to give the breakpoint a
- frame ID so that the breakpoint code can correctly re-identify
- the dummy breakpoint. */
- if (gdbarch_unwind_dummy_id_p (current_gdbarch))
- {
- /* Sanity. The exact same SP value is returned by
- PUSH_DUMMY_CALL, saved as the dummy-frame TOS, and used by
- unwind_dummy_id to form the frame ID's stack address. */
- gdb_assert (DEPRECATED_USE_GENERIC_DUMMY_FRAMES);
- frame = frame_id_build (sp, sal.pc);
- }
- else
- {
- /* The assumption here is that push_dummy_call() returned the
- stack part of the frame ID. Unfortunately, many older
- architectures were, via a convoluted mess, relying on the
- poorly defined and greatly overloaded
- DEPRECATED_TARGET_READ_FP or DEPRECATED_FP_REGNUM to supply
- the value. */
- if (DEPRECATED_TARGET_READ_FP_P ())
- frame = frame_id_build (DEPRECATED_TARGET_READ_FP (), sal.pc);
- else if (DEPRECATED_FP_REGNUM >= 0)
- frame = frame_id_build (read_register (DEPRECATED_FP_REGNUM), sal.pc);
- else
- frame = frame_id_build (sp, sal.pc);
- }
- bpt = set_momentary_breakpoint (sal, frame, bp_call_dummy);
+ /* Sanity. The exact same SP value is returned by
+ PUSH_DUMMY_CALL, saved as the dummy-frame TOS, and used by
+ unwind_dummy_id to form the frame ID's stack address. */
+ bpt = set_momentary_breakpoint (sal, dummy_id, bp_call_dummy);
bpt->disposition = disp_del;
}
+ /* Everything's ready, push all the info needed to restore the
+ caller (and identify the dummy-frame) onto the dummy-frame
+ stack. */
+ dummy_frame_push (caller_regcache, &dummy_id);
+ discard_cleanups (caller_regcache_cleanup);
+
+ /* - SNIP - SNIP - SNIP - SNIP - SNIP - SNIP - SNIP - SNIP - SNIP -
+ If you're looking to implement asynchronous dummy-frames, then
+ just below is the place to chop this function in two.. */
+
+ /* Now proceed, having reached the desired place. */
+ clear_proceed_status ();
+
/* Execute a "stack dummy", a piece of code stored in the stack by
the debugger to be executed in the inferior.
leave the RETBUF alone. */
do_cleanups (inf_status_cleanup);
- /* Figure out the value returned by the function. */
- if (struct_return)
- {
+ /* Figure out the value returned by the function, return that. */
+ {
+ struct value *retval;
+ if (TYPE_CODE (value_type) == TYPE_CODE_VOID)
+ /* If the function returns void, don't bother fetching the
+ return value. */
+ retval = allocate_value (value_type);
+ else if (struct_return)
/* NOTE: cagney/2003-09-27: This assumes that PUSH_DUMMY_CALL
has correctly stored STRUCT_ADDR in the target. In the past
that hasn't been the case, the old MIPS PUSH_ARGUMENTS
you're seeing problems with values being returned using the
"struct return convention", check that PUSH_DUMMY_CALL isn't
playing tricks. */
- struct value *retval = value_at (value_type, struct_addr, NULL);
- do_cleanups (retbuf_cleanup);
- return retval;
- }
- else
- {
- /* The non-register case was handled above. */
- struct value *retval = register_value_being_returned (value_type,
- retbuf);
- do_cleanups (retbuf_cleanup);
- return retval;
- }
+ retval = value_at (value_type, struct_addr, NULL);
+ else
+ {
+ /* This code only handles "register convention". */
+ retval = allocate_value (value_type);
+ gdb_assert (gdbarch_return_value (current_gdbarch, value_type,
+ NULL, NULL, NULL)
+ == RETURN_VALUE_REGISTER_CONVENTION);
+ gdbarch_return_value (current_gdbarch, value_type, retbuf,
+ VALUE_CONTENTS_RAW (retval) /*read*/,
+ NULL /*write*/);
+ }
+ do_cleanups (retbuf_cleanup);
+ return retval;
+ }
}
void _initialize_infcall (void);
{
add_setshow_boolean_cmd ("coerce-float-to-double", class_obscure,
&coerce_float_to_double_p, "\
-Set coercion of floats to doubles when calling functions\n\
+Set coercion of floats to doubles when calling functions.", "\
+Show coercion of floats to doubles when calling functions", "\
Variables of type float should generally be converted to doubles before\n\
calling an unprototyped function, and left alone when calling a prototyped\n\
function. However, some older debug info formats do not provide enough\n\
set, GDB will perform the conversion for a function it considers\n\
unprototyped.\n\
The default is to perform the conversion.\n", "\
-Show coercion of floats to doubles when calling functions\n\
-Variables of type float should generally be converted to doubles before\n\
-calling an unprototyped function, and left alone when calling a prototyped\n\
-function. However, some older debug info formats do not provide enough\n\
-information to determine that a function is prototyped. If this flag is\n\
-set, GDB will perform the conversion for a function it considers\n\
-unprototyped.\n\
-The default is to perform the conversion.\n",
+Coercion of floats to doubles when calling functions is %s.",
NULL, NULL, &setlist, &showlist);
add_setshow_boolean_cmd ("unwindonsignal", no_class,
&unwind_on_signal_p, "\
-Set unwinding of stack if a signal is received while in a call dummy.\n\
+Set unwinding of stack if a signal is received while in a call dummy.", "\
+Show unwinding of stack if a signal is received while in a call dummy.", "\
The unwindonsignal lets the user determine what gdb should do if a signal\n\
is received while in a function called from gdb (call dummy). If set, gdb\n\
unwinds the stack and restore the context to what as it was before the call.\n\
The default is to stop in the frame where the signal was received.", "\
-Set unwinding of stack if a signal is received while in a call dummy.\n\
-The unwindonsignal lets the user determine what gdb should do if a signal\n\
-is received while in a function called from gdb (call dummy). If set, gdb\n\
-unwinds the stack and restore the context to what as it was before the call.\n\
-The default is to stop in the frame where the signal was received.",
+Unwinding of stack if a signal is received while in a call dummy is %s.",
NULL, NULL, &setlist, &showlist);
}