-/* Memory-access and commands for inferior process, for GDB.
- Copyright (C) 1986, 1987, 1988 Free Software Foundation, Inc.
-
-GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone
-for the consequences of using it or for whether it serves any
-particular purpose or works at all, unless he says so in writing.
-Refer to the GDB General Public License for full details.
-
-Everyone is granted permission to copy, modify and redistribute GDB,
-but only under the conditions described in the GDB General Public
-License. A copy of this license is supposed to have been given to you
-along with GDB so you can know your rights and responsibilities. It
-should be in a file named COPYING. Among other things, the copyright
-notice and this notice must be preserved on all copies.
-
-In other words, go ahead and share GDB, but don't try to stop
-anyone else from sharing it farther. Help stamp out software hoarding!
-*/
+/* Memory-access and commands for "inferior" process, for GDB.
+ Copyright 1986, 1987, 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
-#include "initialize.h"
+#include <signal.h>
+#include <sys/param.h>
+#include <string.h>
#include "symtab.h"
-#include "param.h"
+#include "gdbtypes.h"
#include "frame.h"
#include "inferior.h"
#include "environ.h"
#include "value.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "language.h"
-#include <stdio.h>
-#include <signal.h>
-#include <sys/param.h>
+static void continue_command PARAMS ((char *, int));
+
+static void until_next_command PARAMS ((int));
+
+static void until_command PARAMS ((char *, int));
+
+static void path_info PARAMS ((char *, int));
+
+static void path_command PARAMS ((char *, int));
+
+static void unset_command PARAMS ((char *, int));
+
+static void float_info PARAMS ((char *, int));
+
+static void detach_command PARAMS ((char *, int));
+
+static void nofp_registers_info PARAMS ((char *, int));
+
+static void all_registers_info PARAMS ((char *, int));
+
+static void registers_info PARAMS ((char *, int));
+
+static void do_registers_info PARAMS ((int, int));
+
+static void unset_environment_command PARAMS ((char *, int));
-extern char *sys_siglist[];
+static void set_environment_command PARAMS ((char *, int));
+
+static void environment_info PARAMS ((char *, int));
+
+static void program_info PARAMS ((char *, int));
+
+static void finish_command PARAMS ((char *, int));
+
+static void signal_command PARAMS ((char *, int));
+
+static void jump_command PARAMS ((char *, int));
+
+static void step_1 PARAMS ((int, int, char *));
+
+static void nexti_command PARAMS ((char *, int));
+
+static void stepi_command PARAMS ((char *, int));
+
+static void next_command PARAMS ((char *, int));
+
+static void step_command PARAMS ((char *, int));
+
+static void run_command PARAMS ((char *, int));
#define ERROR_NO_INFERIOR \
- if (inferior_pid == 0) error ("The program is not being run.");
+ if (!target_has_execution) error ("The program is not being run.");
-/* String containing arguments to give to the program,
- with a space added at the front. Just a space means no args. */
+/* String containing arguments to give to the program, separated by spaces.
+ Empty string (pointer to '\0') means no args. */
static char *inferior_args;
char *inferior_io_terminal;
-/* Pid of our debugged inferior, or 0 if no inferior now. */
+/* Pid of our debugged inferior, or 0 if no inferior now.
+ Since various parts of infrun.c test this to see whether there is a program
+ being debugged it should be nonzero (currently 3 is used) for remote
+ debugging. */
int inferior_pid;
/* Last signal that the inferior received (why it stopped). */
-int stop_signal;
+enum target_signal stop_signal;
/* Address at which inferior stopped. */
CORE_ADDR stop_pc;
-/* Stack frame when program stopped. */
+/* Chain containing status of breakpoint(s) that we have stopped at. */
-FRAME stop_frame;
+bpstat stop_bpstat;
-/* Number of breakpoint it stopped at, or 0 if none. */
+/* Flag indicating that a command has proceeded the inferior past the
+ current breakpoint. */
-int stop_breakpoint;
+int breakpoint_proceeded;
/* Nonzero if stopped due to a step command. */
int stop_stack_dummy;
+/* Nonzero if stopped due to a random (unexpected) signal in inferior
+ process. */
+
+int stopped_by_random_signal;
+
/* Range to single step within.
If this is nonzero, respond to a single-step signal
by continuing to step if the pc is in this range. */
This is how we know when we step into a subroutine call,
and how to set the frame for the breakpoint used to step out. */
-CORE_ADDR step_frame;
+CORE_ADDR step_frame_address;
+
+/* Our notion of the current stack pointer. */
+
+CORE_ADDR step_sp;
/* 1 means step over all subroutine calls.
+ 0 means don't step over calls (used by stepi).
-1 means step over calls to undebuggable functions. */
int step_over_calls;
struct environ *inferior_environ;
-CORE_ADDR read_pc ();
-struct command_line *get_breakpoint_commands ();
-
-START_FILE
\f
-int
-have_inferior_p ()
-{
- return inferior_pid != 0;
-}
-
-static void
-set_args_command (args)
- char *args;
-{
- free (inferior_args);
- if (!args) args = "";
- inferior_args = concat (" ", args, "");
-}
-
+/* ARGSUSED */
void
-tty_command (file)
+tty_command (file, from_tty)
char *file;
+ int from_tty;
{
if (file == 0)
error_no_arg ("terminal name for running target process");
char *args;
int from_tty;
{
- extern char **environ;
- register int i;
char *exec_file;
- char *allargs;
-
- extern int sys_nerr;
- extern char *sys_errlist[];
- extern int errno;
dont_repeat ();
if (inferior_pid)
{
- if (query ("The program being debugged has been started already.\n\
+ if (
+ !query ("The program being debugged has been started already.\n\
Start it from the beginning? "))
- kill_inferior ();
- else
- error ("Program already started.");
+ error ("Program not restarted.");
+ target_kill ();
}
- if (remote_debugging)
- {
- free (allargs);
- if (from_tty)
- {
- printf ("Starting program: %s%s\n",
- exec_file, inferior_args);
- fflush (stdout);
- }
- }
- else
- {
- if (args)
- set_args_command (args);
+ clear_breakpoint_hit_counts ();
- exec_file = (char *) get_exec_file ();
- if (from_tty)
- {
- printf ("Starting program: %s%s\n",
- exec_file, inferior_args);
- fflush (stdout);
- }
+ exec_file = (char *) get_exec_file (0);
+
+ /* The exec file is re-read every time we do a generic_mourn_inferior, so
+ we just have to worry about the symbol file. */
+ reread_symbols ();
+
+ /* We keep symbols from add-symbol-file, on the grounds that the
+ user might want to add some symbols before running the program
+ (right?). But sometimes (dynamic loading where the user manually
+ introduces the new symbols with add-symbol-file), the code which
+ the symbols describe does not persist between runs. Currently
+ the user has to manually nuke all symbols between runs if they
+ want them to go away (PR 2207). This is probably reasonable. */
- allargs = concat ("exec ", exec_file, inferior_args);
- inferior_pid = create_inferior (allargs, environ_vector (inferior_environ));
+ if (args)
+ {
+ char *cmd;
+ cmd = concat ("set args ", args, NULL);
+ make_cleanup (free, cmd);
+ execute_command (cmd, from_tty);
}
- clear_proceed_status ();
+ if (from_tty)
+ {
+ puts_filtered("Starting program: ");
+ if (exec_file)
+ puts_filtered(exec_file);
+ puts_filtered(" ");
+ puts_filtered(inferior_args);
+ puts_filtered("\n");
+ gdb_flush (gdb_stdout);
+ }
- start_inferior ();
+ target_create_inferior (exec_file, inferior_args,
+ environ_vector (inferior_environ));
}
\f
-void
-cont_command (proc_count_exp, from_tty)
+static void
+continue_command (proc_count_exp, from_tty)
char *proc_count_exp;
int from_tty;
{
ERROR_NO_INFERIOR;
- clear_proceed_status ();
-
/* If have argument, set proceed count of breakpoint we stopped at. */
- if (stop_breakpoint && proc_count_exp)
+ if (proc_count_exp != NULL)
{
- set_ignore_count (stop_breakpoint,
- parse_and_eval_address (proc_count_exp) - 1,
- from_tty);
- if (from_tty)
- printf (" ");
+ bpstat bs = stop_bpstat;
+ int num = bpstat_num (&bs);
+ if (num == 0 && from_tty)
+ {
+ printf_filtered
+ ("Not stopped at any breakpoint; argument ignored.\n");
+ }
+ while (num != 0)
+ {
+ set_ignore_count (num,
+ parse_and_eval_address (proc_count_exp) - 1,
+ from_tty);
+ /* set_ignore_count prints a message ending with a period.
+ So print two spaces before "Continuing.". */
+ if (from_tty)
+ printf_filtered (" ");
+ num = bpstat_num (&bs);
+ }
}
if (from_tty)
- printf ("Continuing.\n");
+ printf_filtered ("Continuing.\n");
- proceed (-1, -1, 0);
+ clear_proceed_status ();
+
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
}
\f
/* Step until outside of current statement. */
-static void step_1 ();
+/* ARGSUSED */
static void
-step_command (count_string)
+step_command (count_string, from_tty)
+ char *count_string;
+ int from_tty;
{
step_1 (0, 0, count_string);
}
/* Likewise, but skip over subroutine calls as if single instructions. */
+/* ARGSUSED */
static void
-next_command (count_string)
+next_command (count_string, from_tty)
+ char *count_string;
+ int from_tty;
{
step_1 (1, 0, count_string);
}
/* Likewise, but step only one instruction. */
+/* ARGSUSED */
static void
-stepi_command (count_string)
+stepi_command (count_string, from_tty)
+ char *count_string;
+ int from_tty;
{
step_1 (0, 1, count_string);
}
+/* ARGSUSED */
static void
-nexti_command (count_string)
+nexti_command (count_string, from_tty)
+ char *count_string;
+ int from_tty;
{
step_1 (1, 1, count_string);
}
char *count_string;
{
register int count = 1;
+ struct frame_info *frame;
+ struct cleanup *cleanups = 0;
ERROR_NO_INFERIOR;
count = count_string ? parse_and_eval_address (count_string) : 1;
+ if (!single_inst || skip_subroutines) /* leave si command alone */
+ {
+ enable_longjmp_breakpoint();
+ cleanups = make_cleanup(disable_longjmp_breakpoint, 0);
+ }
+
for (; count > 0; count--)
{
clear_proceed_status ();
- step_frame = get_current_frame ();
+ frame = get_current_frame ();
+ if (!frame) /* Avoid coredump here. Why tho? */
+ error ("No current frame");
+ step_frame_address = FRAME_FP (frame);
+ step_sp = read_sp ();
if (! single_inst)
{
find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
if (step_range_end == 0)
{
- terminal_ours ();
- error ("Current function has no line number information.");
+ char *name;
+ if (find_pc_partial_function (stop_pc, &name, &step_range_start,
+ &step_range_end) == 0)
+ error ("Cannot find bounds of current function");
+
+ target_terminal_ours ();
+ printf_filtered ("\
+Single stepping until exit from function %s, \n\
+which has no line number information.\n", name);
+ gdb_flush (gdb_stdout);
}
}
else
{
- /* Say we are stepping, but stop after one insn whatever it does.
- Don't step through subroutine calls even to undebuggable functions. */
+ /* Say we are stepping, but stop after one insn whatever it does. */
step_range_start = step_range_end = 1;
if (!skip_subroutines)
+ /* It is stepi.
+ Don't step over function calls, not even to functions lacking
+ line numbers. */
step_over_calls = 0;
}
step_over_calls = 1;
step_multi = (count > 1);
- proceed (-1, -1, 1);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
if (! stop_step)
break;
+
+ /* FIXME: On nexti, this may have already been done (when we hit the
+ step resume break, I think). Probably this should be moved to
+ wait_for_inferior (near the top). */
+#if defined (SHIFT_INST_REGS)
+ SHIFT_INST_REGS();
+#endif
}
+
+ if (!single_inst || skip_subroutines)
+ do_cleanups(cleanups);
}
\f
/* Continue program at specified address. */
register CORE_ADDR addr;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
+ struct symbol *fn;
+ struct symbol *sfn;
ERROR_NO_INFERIOR;
if (!arg)
error_no_arg ("starting address");
- sals = decode_line_spec (arg, 1);
+ sals = decode_line_spec_1 (arg, 1);
if (sals.nelts != 1)
{
error ("Unreasonable jump request");
}
sal = sals.sals[0];
- free (sals.sals);
+ free ((PTR)sals.sals);
if (sal.symtab == 0 && sal.pc == 0)
error ("No source file has been specified.");
- if (sal.pc == 0)
- sal.pc = find_line_pc (sal.symtab, sal.line);
+ resolve_sal_pc (&sal); /* May error out */
- {
- struct symbol *fn = get_frame_function (get_current_frame ());
- struct symbol *sfn = find_pc_function (sal.pc);
- if (fn != 0 && sfn != fn
- && ! query ("That is not in function %s. Continue there? ",
- sal.line, SYMBOL_NAME (fn)))
- error ("Not confirmed.");
- }
-
- if (sal.pc == 0)
- error ("No line %d in file \"%s\".", sal.line, sal.symtab->filename);
+ /* See if we are trying to jump to another function. */
+ fn = get_frame_function (get_current_frame ());
+ sfn = find_pc_function (sal.pc);
+ if (fn != NULL && sfn != fn)
+ {
+ if (!query ("Line %d is not in `%s'. Jump anyway? ", sal.line,
+ SYMBOL_SOURCE_NAME (fn)))
+ {
+ error ("Not confirmed.");
+ /* NOTREACHED */
+ }
+ }
addr = sal.pc;
- clear_proceed_status ();
-
if (from_tty)
- printf ("Continuing at 0x%x.\n", addr);
+ {
+ printf_filtered ("Continuing at ");
+ print_address_numeric (addr, 1, gdb_stdout);
+ printf_filtered (".\n");
+ }
- proceed (addr, 0, 0);
+ clear_proceed_status ();
+ proceed (addr, TARGET_SIGNAL_0, 0);
}
/* Continue program giving it specified signal. */
char *signum_exp;
int from_tty;
{
- register int signum;
+ enum target_signal oursig;
dont_repeat (); /* Too dangerous. */
ERROR_NO_INFERIOR;
if (!signum_exp)
error_no_arg ("signal number");
- signum = parse_and_eval_address (signum_exp);
+ /* It would be even slicker to make signal names be valid expressions,
+ (the type could be "enum $signal" or some such), then the user could
+ assign them to convenience variables. */
+ oursig = target_signal_from_name (signum_exp);
- clear_proceed_status ();
+ if (oursig == TARGET_SIGNAL_UNKNOWN)
+ {
+ /* No, try numeric. */
+ int num = parse_and_eval_address (signum_exp);
+
+ if (num == 0)
+ oursig = TARGET_SIGNAL_0;
+ else
+ oursig = target_signal_from_command (num);
+ }
if (from_tty)
- printf ("Continuing with signal %d.\n", signum);
+ {
+ if (oursig == TARGET_SIGNAL_0)
+ printf_filtered ("Continuing with no signal.\n");
+ else
+ printf_filtered ("Continuing with signal %s.\n",
+ target_signal_to_name (oursig));
+ }
- proceed (stop_pc, signum, 0);
+ clear_proceed_status ();
+ /* "signal 0" should not get stuck if we are stopped at a breakpoint.
+ FIXME: Neither should "signal foo" but when I tried passing
+ (CORE_ADDR)-1 unconditionally I got a testsuite failure which I haven't
+ tried to track down yet. */
+ proceed (oursig == TARGET_SIGNAL_0 ? (CORE_ADDR) -1 : stop_pc, oursig, 0);
+}
+
+/* Call breakpoint_auto_delete on the current contents of the bpstat
+ pointed to by arg (which is really a bpstat *). */
+void
+breakpoint_auto_delete_contents (arg)
+ PTR arg;
+{
+ breakpoint_auto_delete (*(bpstat *)arg);
}
/* Execute a "stack dummy", a piece of code stored in the stack
The dummy's frame is automatically popped whenever that break is hit.
If that is the first time the program stops, run_stack_dummy
- returns to its caller with that frame already gone.
- Otherwise, the caller never gets returned to. */
+ returns to its caller with that frame already gone and returns 0.
+ Otherwise, run_stack-dummy returns 1 (the frame will eventually be popped
+ when we do hit that breakpoint). */
-/* 4 => return instead of letting the stack dummy run. */
+/* DEBUG HOOK: 4 => return instead of letting the stack dummy run. */
static int stack_dummy_testing = 0;
-void
+int
run_stack_dummy (addr, buffer)
CORE_ADDR addr;
- REGISTER_TYPE *buffer;
+ char buffer[REGISTER_BYTES];
{
- int saved_pc_changed = pc_changed;
- int saved_stop_signal = stop_signal;
- int saved_stop_pc = stop_pc;
- int saved_stop_frame = stop_frame;
- int saved_stop_breakpoint = stop_breakpoint;
- int saved_stop_step = stop_step;
- int saved_stop_stack_dummy = stop_stack_dummy;
- FRAME saved_selected_frame;
- int saved_selected_level;
- struct command_line *saved_breakpoint_commands
- = get_breakpoint_commands ();
-
- record_selected_frame (&saved_selected_frame, &saved_selected_level);
+ struct cleanup *old_cleanups = make_cleanup (null_cleanup, 0);
/* Now proceed, having reached the desired place. */
clear_proceed_status ();
if (stack_dummy_testing & 4)
{
POP_FRAME;
- return;
+ return(0);
}
- proceed (addr, 0, 0);
+#ifdef CALL_DUMMY_BREAKPOINT_OFFSET
+ {
+ struct breakpoint *bpt;
+ struct symtab_and_line sal;
+
+#if CALL_DUMMY_LOCATION != AT_ENTRY_POINT
+ sal.pc = addr - CALL_DUMMY_START_OFFSET + CALL_DUMMY_BREAKPOINT_OFFSET;
+#else
+ sal.pc = CALL_DUMMY_ADDRESS ();
+#endif
+ sal.symtab = NULL;
+ sal.line = 0;
+
+ /* Set up a FRAME for the dummy frame so we can pass it to
+ set_momentary_breakpoint. We need to give the breakpoint a
+ frame in case there is only one copy of the dummy (e.g.
+ CALL_DUMMY_LOCATION == AFTER_TEXT_END). */
+ flush_cached_frames ();
+ set_current_frame (create_new_frame (read_fp (), sal.pc));
+
+ /* If defined, CALL_DUMMY_BREAKPOINT_OFFSET is where we need to put
+ a breakpoint instruction. If not, the call dummy already has the
+ breakpoint instruction in it.
+
+ addr is the address of the call dummy plus the CALL_DUMMY_START_OFFSET,
+ so we need to subtract the CALL_DUMMY_START_OFFSET. */
+ bpt = set_momentary_breakpoint (sal,
+ get_current_frame (),
+ bp_call_dummy);
+ bpt->disposition = delete;
+
+ /* If all error()s out of proceed ended up calling normal_stop (and
+ perhaps they should; it already does in the special case of error
+ out of resume()), then we wouldn't need this. */
+ make_cleanup (breakpoint_auto_delete_contents, &stop_bpstat);
+ }
+#endif /* CALL_DUMMY_BREAKPOINT_OFFSET. */
+
+ proceed_to_finish = 1; /* We want stop_registers, please... */
+ proceed (addr, TARGET_SIGNAL_0, 0);
+
+ discard_cleanups (old_cleanups);
if (!stop_stack_dummy)
- error ("Cannot continue previously requested operation.");
-
- set_breakpoint_commands (saved_breakpoint_commands);
- select_frame (saved_selected_frame, saved_selected_level);
- stop_signal = saved_stop_signal;
- stop_pc = saved_stop_pc;
- stop_frame = saved_stop_frame;
- stop_breakpoint = saved_stop_breakpoint;
- stop_step = saved_stop_step;
- stop_stack_dummy = saved_stop_stack_dummy;
- pc_changed = saved_pc_changed;
+ return 1;
/* On return, the stack dummy has been popped already. */
- bcopy (stop_registers, buffer, sizeof stop_registers);
+ memcpy (buffer, stop_registers, sizeof stop_registers);
+ return 0;
+}
+\f
+/* Proceed until we reach a different source line with pc greater than
+ our current one or exit the function. We skip calls in both cases.
+
+ Note that eventually this command should probably be changed so
+ that only source lines are printed out when we hit the breakpoint
+ we set. This may involve changes to wait_for_inferior and the
+ proceed status code. */
+
+/* ARGSUSED */
+static void
+until_next_command (from_tty)
+ int from_tty;
+{
+ struct frame_info *frame;
+ CORE_ADDR pc;
+ struct symbol *func;
+ struct symtab_and_line sal;
+
+ clear_proceed_status ();
+
+ frame = get_current_frame ();
+
+ /* Step until either exited from this function or greater
+ than the current line (if in symbolic section) or pc (if
+ not). */
+
+ pc = read_pc ();
+ func = find_pc_function (pc);
+
+ if (!func)
+ {
+ struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc);
+
+ if (msymbol == NULL)
+ error ("Execution is not within a known function.");
+
+ step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
+ step_range_end = pc;
+ }
+ else
+ {
+ sal = find_pc_line (pc, 0);
+
+ step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+ step_range_end = sal.end;
+ }
+
+ step_over_calls = 1;
+ step_frame_address = FRAME_FP (frame);
+ step_sp = read_sp ();
+
+ step_multi = 0; /* Only one call to proceed */
+
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+}
+
+static void
+until_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ if (!target_has_execution)
+ error ("The program is not running.");
+ if (arg)
+ until_break_command (arg, from_tty);
+ else
+ until_next_command (from_tty);
}
\f
/* "finish": Set a temporary breakpoint at the place
int from_tty;
{
struct symtab_and_line sal;
- register FRAME frame;
- struct frame_info fi;
-
+ register struct frame_info *frame;
register struct symbol *function;
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
- if (!have_inferior_p ())
- error ("The program is not being run.");
if (arg)
error ("The \"finish\" command does not take any arguments.");
+ if (!target_has_execution)
+ error ("The program is not running.");
+ if (selected_frame == NULL)
+ error ("No selected frame.");
frame = get_prev_frame (selected_frame);
if (frame == 0)
clear_proceed_status ();
- fi = get_frame_info (frame);
- sal = find_pc_line (fi.pc, 0);
- sal.pc = fi.pc;
- set_momentary_breakpoint (sal, frame);
+ sal = find_pc_line (frame->pc, 0);
+ sal.pc = frame->pc;
+
+ breakpoint = set_momentary_breakpoint (sal, frame, bp_finish);
+
+ old_chain = make_cleanup(delete_breakpoint, breakpoint);
/* Find the function we will return from. */
- fi = get_frame_info (fi.next_frame);
- function = find_pc_function (fi.pc);
+ function = find_pc_function (selected_frame->pc);
+ /* Print info on the selected frame, including level number
+ but not source. */
if (from_tty)
{
- printf ("Run till exit from ");
- print_selected_frame ();
+ printf_filtered ("Run till exit from ");
+ print_stack_frame (selected_frame, selected_frame_level, 0);
}
- proceed (-1, -1, 0);
+ proceed_to_finish = 1; /* We want stop_registers, please... */
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
- if (stop_breakpoint == -3 && function != 0)
+ /* Did we stop at our breakpoint? */
+ if (bpstat_find_breakpoint(stop_bpstat, breakpoint) != NULL
+ && function != 0)
{
struct type *value_type;
- register value val;
-
- if (TYPE_CODE (SYMBOL_TYPE (function)) != TYPE_CODE_VOID)
- value_type = SYMBOL_TYPE (function);
- else
+ register value_ptr val;
+ CORE_ADDR funcaddr;
+
+ value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function));
+ if (!value_type)
+ fatal ("internal: finish_command: function has no target type");
+
+ if (TYPE_CODE (value_type) == TYPE_CODE_VOID)
return;
- val = value_being_returned (value_type, stop_registers);
- printf ("Value returned is $%d = ", record_latest_value (val));
- value_print (val, stdout);
- putchar ('\n');
+ funcaddr = BLOCK_START (SYMBOL_BLOCK_VALUE (function));
+
+ val = value_being_returned (value_type, stop_registers,
+ using_struct_return (value_of_variable (function, NULL),
+ funcaddr,
+ value_type,
+ BLOCK_GCC_COMPILED (SYMBOL_BLOCK_VALUE (function))));
+
+ printf_filtered ("Value returned is $%d = ", record_latest_value (val));
+ value_print (val, gdb_stdout, 0, Val_no_prettyprint);
+ printf_filtered ("\n");
}
+ do_cleanups(old_chain);
}
\f
+/* ARGSUSED */
static void
-program_info ()
+program_info (args, from_tty)
+ char *args;
+ int from_tty;
{
- if (inferior_pid == 0)
+ bpstat bs = stop_bpstat;
+ int num = bpstat_num (&bs);
+
+ if (!target_has_execution)
{
- printf ("The program being debugged is not being run.\n");
+ printf_filtered ("The program being debugged is not being run.\n");
return;
}
- printf ("Program being debugged is in process %d, stopped at 0x%x.\n",
- inferior_pid, stop_pc);
+ target_files_info ();
+ printf_filtered ("Program stopped at %s.\n",
+ local_hex_string((unsigned long) stop_pc));
if (stop_step)
- printf ("It stopped after being stepped.\n");
- else if (stop_breakpoint)
- printf ("It stopped at breakpoint %d.\n", stop_breakpoint);
- else if (stop_signal)
- printf ("It stopped with signal %d (%s).\n",
- stop_signal, sys_siglist[stop_signal]);
-
- printf ("\nType \"info stack\" or \"info reg\" for more information.\n");
+ printf_filtered ("It stopped after being stepped.\n");
+ else if (num != 0)
+ {
+ /* There may be several breakpoints in the same place, so this
+ isn't as strange as it seems. */
+ while (num != 0)
+ {
+ if (num < 0)
+ printf_filtered ("It stopped at a breakpoint that has since been deleted.\n");
+ else
+ printf_filtered ("It stopped at breakpoint %d.\n", num);
+ num = bpstat_num (&bs);
+ }
+ }
+ else if (stop_signal != TARGET_SIGNAL_0)
+ {
+ printf_filtered ("It stopped with signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+ }
+
+ if (!from_tty)
+ printf_filtered ("Type \"info stack\" or \"info registers\" for more information.\n");
}
\f
static void
-environment_info (var)
+environment_info (var, from_tty)
char *var;
+ int from_tty;
{
if (var)
{
register char *val = get_in_environ (inferior_environ, var);
if (val)
- printf ("%s = %s\n", var, val);
+ {
+ puts_filtered (var);
+ puts_filtered (" = ");
+ puts_filtered (val);
+ puts_filtered ("\n");
+ }
else
- printf ("Environment variable \"%s\" not defined.\n", var);
+ {
+ puts_filtered ("Environment variable \"");
+ puts_filtered (var);
+ puts_filtered ("\" not defined.\n");
+ }
}
else
{
register char **vector = environ_vector (inferior_environ);
while (*vector)
- printf ("%s\n", *vector++);
+ {
+ puts_filtered (*vector++);
+ puts_filtered ("\n");
+ }
}
}
static void
-set_environment_command (arg)
+set_environment_command (arg, from_tty)
char *arg;
+ int from_tty;
{
register char *p, *val, *var;
+ int nullset = 0;
if (arg == 0)
error_no_arg ("environment variable and value");
- p = (char *) index (arg, '=');
- val = (char *) index (arg, ' ');
+ /* Find seperation between variable name and value */
+ p = (char *) strchr (arg, '=');
+ val = (char *) strchr (arg, ' ');
+
if (p != 0 && val != 0)
- p = arg + min (p - arg, val - arg);
+ {
+ /* We have both a space and an equals. If the space is before the
+ equals, walk forward over the spaces til we see a nonspace
+ (possibly the equals). */
+ if (p > val)
+ while (*val == ' ')
+ val++;
+
+ /* Now if the = is after the char following the spaces,
+ take the char following the spaces. */
+ if (p > val)
+ p = val - 1;
+ }
else if (val != 0 && p == 0)
p = val;
- if (p == 0)
- error ("Space or \"=\" must separate variable name and its value");
- if (p[1] == 0)
- error_no_arg ("value for the variable");
if (p == arg)
error_no_arg ("environment variable to set");
- val = p + 1;
- while (*val == ' ' || *val == '\t') val++;
+ if (p == 0 || p[1] == 0)
+ {
+ nullset = 1;
+ if (p == 0)
+ p = arg + strlen (arg); /* So that savestring below will work */
+ }
+ else
+ {
+ /* Not setting variable value to null */
+ val = p + 1;
+ while (*val == ' ' || *val == '\t')
+ val++;
+ }
+
while (p != arg && (p[-1] == ' ' || p[-1] == '\t')) p--;
var = savestring (arg, p - arg);
- set_in_environ (inferior_environ, var, val);
+ if (nullset)
+ {
+ printf_filtered ("Setting environment variable \"%s\" to null value.\n", var);
+ set_in_environ (inferior_environ, var, "");
+ }
+ else
+ set_in_environ (inferior_environ, var, val);
free (var);
}
static void
-unset_environment_command (var)
+unset_environment_command (var, from_tty)
char *var;
+ int from_tty;
{
if (var == 0)
- error_no_arg ("environment variable");
-
- unset_in_environ (inferior_environ, var);
-}
-\f
-/* Read an integer from debugged memory, given address and number of bytes. */
-
-read_memory_integer (memaddr, len)
- CORE_ADDR memaddr;
- int len;
-{
- char cbuf;
- short sbuf;
- int ibuf;
- long lbuf;
-
- if (len == sizeof (char))
{
- read_memory (memaddr, &cbuf, len);
- return cbuf;
- }
- if (len == sizeof (short))
- {
- read_memory (memaddr, &sbuf, len);
- return sbuf;
- }
- if (len == sizeof (int))
- {
- read_memory (memaddr, &ibuf, len);
- return ibuf;
- }
- if (len == sizeof (lbuf))
- {
- read_memory (memaddr, &lbuf, len);
- return lbuf;
+ /* If there is no argument, delete all environment variables.
+ Ask for confirmation if reading from the terminal. */
+ if (!from_tty || query ("Delete all environment variables? "))
+ {
+ free_environ (inferior_environ);
+ inferior_environ = make_environ ();
+ }
}
- error ("Cannot handle integers of %d bytes.", len);
+ else
+ unset_in_environ (inferior_environ, var);
}
-\f
-CORE_ADDR
-read_pc ()
+
+/* Handle the execution path (PATH variable) */
+
+static const char path_var_name[] = "PATH";
+
+/* ARGSUSED */
+static void
+path_info (args, from_tty)
+ char *args;
+ int from_tty;
{
- return (CORE_ADDR) read_register (PC_REGNUM);
+ puts_filtered ("Executable and object file path: ");
+ puts_filtered (get_in_environ (inferior_environ, path_var_name));
+ puts_filtered ("\n");
}
-write_pc (val)
- CORE_ADDR val;
+/* Add zero or more directories to the front of the execution path. */
+
+static void
+path_command (dirname, from_tty)
+ char *dirname;
+ int from_tty;
{
- write_register (PC_REGNUM, (long) val);
+ char *exec_path;
+
+ dont_repeat ();
+ exec_path = strsave (get_in_environ (inferior_environ, path_var_name));
+ mod_path (dirname, &exec_path);
+ set_in_environ (inferior_environ, path_var_name, exec_path);
+ free (exec_path);
+ if (from_tty)
+ path_info ((char *)NULL, from_tty);
}
+\f
+/* The array of register names. */
char *reg_names[] = REGISTER_NAMES;
+/* Print out the machine register regnum. If regnum is -1,
+ print all registers (fpregs == 1) or all non-float registers
+ (fpregs == 0).
+
+ For most machines, having all_registers_info() print the
+ register(s) one per line is good enough. If a different format
+ is required, (eg, for MIPS or Pyramid 90x, which both have
+ lots of regs), or there is an existing convention for showing
+ all the registers, define the macro DO_REGISTERS_INFO(regnum, fp)
+ to provide that format. */
+
+#if !defined (DO_REGISTERS_INFO)
+
+#define DO_REGISTERS_INFO(regnum, fp) do_registers_info(regnum, fp)
+
static void
-registers_info (addr_exp)
- char *addr_exp;
+do_registers_info (regnum, fpregs)
+ int regnum;
+ int fpregs;
{
register int i;
- int regnum;
+ int numregs = ARCH_NUM_REGS;
- if (addr_exp)
+ for (i = 0; i < numregs; i++)
{
- if (*addr_exp >= '0' && *addr_exp <= '9')
- regnum = atoi (addr_exp);
- else
+ char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+
+ /* Decide between printing all regs, nonfloat regs, or specific reg. */
+ if (regnum == -1) {
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT && !fpregs)
+ continue;
+ } else {
+ if (i != regnum)
+ continue;
+ }
+
+ fputs_filtered (reg_names[i], gdb_stdout);
+ print_spaces_filtered (15 - strlen (reg_names[i]), gdb_stdout);
+
+ /* Get the data in raw format. */
+ if (read_relative_register_raw_bytes (i, raw_buffer))
{
- register char *p = addr_exp;
- if (p[0] == '$')
- p++;
- for (regnum = 0; regnum < NUM_REGS; regnum++)
- if (!strcmp (p, reg_names[regnum]))
- break;
- if (regnum == NUM_REGS)
- error ("%s: invalid register name.", addr_exp);
+ printf_filtered ("Invalid register contents\n");
+ continue;
}
- }
- else
- printf ("Reg\tContents\n\n");
- for (i = 0; i < NUM_REGS; i++)
- {
- unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
- unsigned char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
- REGISTER_TYPE val;
-
- if (addr_exp != 0 && i != regnum)
- continue;
-
- /* On machines with lots of registers, pause every 16 lines
- so user can read the output. */
- if (addr_exp == 0 && i > 0 && i % 16 == 0)
+ /* Convert raw data to virtual format if necessary. */
+#ifdef REGISTER_CONVERTIBLE
+ if (REGISTER_CONVERTIBLE (i))
{
- printf ("--Type Return to print more--");
- fflush (stdout);
- read_line ();
+ REGISTER_CONVERT_TO_VIRTUAL (i, REGISTER_VIRTUAL_TYPE (i),
+ raw_buffer, virtual_buffer);
}
+ else
+#endif
+ memcpy (virtual_buffer, raw_buffer,
+ REGISTER_VIRTUAL_SIZE (i));
- /* Get the data in raw format, then convert also to virtual format. */
- read_relative_register_raw_bytes (i, raw_buffer);
- REGISTER_CONVERT_TO_VIRTUAL (i, raw_buffer, virtual_buffer);
+ /* If virtual format is floating, print it that way, and in raw hex. */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+ {
+ register int j;
- printf ("%s\t", reg_names[i]);
+#ifdef INVALID_FLOAT
+ if (INVALID_FLOAT (virtual_buffer, REGISTER_VIRTUAL_SIZE (i)))
+ printf_filtered ("<invalid float>");
+ else
+#endif
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+
+ printf_filtered ("\t(raw 0x");
+ for (j = 0; j < REGISTER_RAW_SIZE (i); j++)
+ printf_filtered ("%02x", (unsigned char)raw_buffer[j]);
+ printf_filtered (")");
+ }
+
+/* FIXME! val_print probably can handle all of these cases now... */
- /* If virtual format is floating, print it that way. */
- if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT
- && ! INVALID_FLOAT (virtual_buffer, REGISTER_VIRTUAL_SIZE (i)))
- val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, stdout);
/* Else if virtual format is too long for printf,
print in hex a byte at a time. */
else if (REGISTER_VIRTUAL_SIZE (i) > sizeof (long))
{
register int j;
- printf ("0x");
+ printf_filtered ("0x");
for (j = 0; j < REGISTER_VIRTUAL_SIZE (i); j++)
- printf ("%02x", virtual_buffer[j]);
+ printf_filtered ("%02x", (unsigned char)virtual_buffer[j]);
}
/* Else print as integer in hex and in decimal. */
else
{
- long val;
-
- bcopy (virtual_buffer, &val, sizeof (long));
- if (val == 0)
- printf ("0");
- else
- printf ("0x%08x %d", val, val);
+ val_print (REGISTER_VIRTUAL_TYPE (i), raw_buffer, 0,
+ gdb_stdout, 'x', 1, 0, Val_pretty_default);
+ printf_filtered ("\t");
+ val_print (REGISTER_VIRTUAL_TYPE (i), raw_buffer, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
}
- /* If register has different raw and virtual formats,
- print the raw format in hex now. */
+ /* The SPARC wants to print even-numbered float regs as doubles
+ in addition to printing them as floats. */
+#ifdef PRINT_REGISTER_HOOK
+ PRINT_REGISTER_HOOK (i);
+#endif
- if (REGISTER_CONVERTIBLE (i))
- {
- register int j;
+ printf_filtered ("\n");
+ }
+}
+#endif /* no DO_REGISTERS_INFO. */
- printf (" (raw 0x");
- for (j = 0; j < REGISTER_RAW_SIZE (i); j++)
- printf ("%02x", raw_buffer[j]);
- printf (")");
- }
- printf ("\n");
+static void
+registers_info (addr_exp, fpregs)
+ char *addr_exp;
+ int fpregs;
+{
+ int regnum, numregs;
+ register char *end;
+
+ if (!target_has_registers)
+ error ("The program has no registers now.");
+
+ if (!addr_exp)
+ {
+ DO_REGISTERS_INFO(-1, fpregs);
+ return;
}
- printf ("Contents are relative to selected stack frame.\n");
+ do
+ {
+ if (addr_exp[0] == '$')
+ addr_exp++;
+ end = addr_exp;
+ while (*end != '\0' && *end != ' ' && *end != '\t')
+ ++end;
+ numregs = ARCH_NUM_REGS;
+ for (regnum = 0; regnum < numregs; regnum++)
+ if (!strncmp (addr_exp, reg_names[regnum], end - addr_exp)
+ && strlen (reg_names[regnum]) == end - addr_exp)
+ goto found;
+ if (*addr_exp >= '0' && *addr_exp <= '9')
+ regnum = atoi (addr_exp); /* Take a number */
+ if (regnum >= numregs) /* Bad name, or bad number */
+ error ("%.*s: invalid register", end - addr_exp, addr_exp);
+
+found:
+ DO_REGISTERS_INFO(regnum, fpregs);
+
+ addr_exp = end;
+ while (*addr_exp == ' ' || *addr_exp == '\t')
+ ++addr_exp;
+ } while (*addr_exp != '\0');
+}
+
+static void
+all_registers_info (addr_exp, from_tty)
+ char *addr_exp;
+ int from_tty;
+{
+ registers_info (addr_exp, 1);
+}
+
+static void
+nofp_registers_info (addr_exp, from_tty)
+ char *addr_exp;
+ int from_tty;
+{
+ registers_info (addr_exp, 0);
}
\f
-#ifdef ATTACH_DETACH
/*
* TODO:
* Should save/restore the tty state since it might be that the
* the tty in some state other than what we want. If it's running
* on another terminal or without a terminal, then saving and
* restoring the tty state is a harmless no-op.
+ * This only needs to be done if we are attaching to a process.
*/
/*
- * attach_command --
- * takes a program started up outside of gdb and ``attaches'' to it.
- * This stops it cold in its tracks and allows us to start tracing it.
- * For this to work, we must be able to send the process a
- * signal and we must have the same effective uid as the program.
- */
-static void
+ attach_command --
+ takes a program started up outside of gdb and ``attaches'' to it.
+ This stops it cold in its tracks and allows us to start debugging it.
+ and wait for the trace-trap that results from attaching. */
+
+void
attach_command (args, from_tty)
char *args;
int from_tty;
{
- char *exec_file;
- int pid;
- int remote;
-
- dont_repeat();
-
- if (!args)
- error_no_arg ("process-id to attach");
-
- while (*args == ' ' || *args == '\t') args++;
-
- if (args[0] == '/')
- remote = 1;
- else
- pid = atoi (args);
+ dont_repeat (); /* Not for the faint of heart */
- if (inferior_pid)
+ if (target_has_execution)
{
if (query ("A program is being debugged already. Kill it? "))
- kill_inferior ();
+ target_kill ();
else
- error ("Inferior not killed.");
+ error ("Not killed.");
}
- exec_file = (char *) get_exec_file ();
+ target_attach (args, from_tty);
- if (from_tty)
- {
- if (remote)
- printf ("Attaching remote machine\n");
- else
- printf ("Attaching program: %s pid %d\n",
- exec_file, pid);
- fflush (stdout);
- }
+ /* Set up the "saved terminal modes" of the inferior
+ based on what modes we are starting it with. */
+ target_terminal_init ();
- if (remote)
- {
- remote_open (args, from_tty);
- start_remote ();
- }
- else
- attach_program (pid);
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
+
+ /* Set up execution context to know that we should return from
+ wait_for_inferior as soon as the target reports a stop. */
+ init_wait_for_inferior ();
+ clear_proceed_status ();
+ stop_soon_quietly = 1;
+
+#ifndef MACH
+ /* Mach 3 does not generate any traps when attaching to inferior,
+ and to set up frames we can do this. */
+
+ wait_for_inferior ();
+#endif
+
+#ifdef SOLIB_ADD
+ /* Add shared library symbols from the newly attached process, if any. */
+ SOLIB_ADD ((char *)0, from_tty, (struct target_ops *)0);
+#endif
+
+ normal_stop ();
}
/*
char *args;
int from_tty;
{
- char *exec_file = (char *)get_exec_file ();
- int signal = 0;
-
- if (!inferior_pid)
- error ("Not currently tracing a program\n");
- if (from_tty)
- {
- printf ("Detaching program: %s pid %d\n",
- exec_file, inferior_pid);
- fflush (stdout);
- }
- if (args)
- signal = atoi (args);
+ dont_repeat (); /* Not for the faint of heart */
+ target_detach (args, from_tty);
+}
- detach (signal);
- inferior_pid = 0;
+/* ARGSUSED */
+static void
+float_info (addr_exp, from_tty)
+ char *addr_exp;
+ int from_tty;
+{
+#ifdef FLOAT_INFO
+ FLOAT_INFO;
+#else
+ printf_filtered ("No floating point info available for this processor.\n");
+#endif
}
-#endif /* ATTACH_DETACH */
\f
-static
-initialize ()
+/* ARGSUSED */
+static void
+unset_command (args, from_tty)
+ char *args;
+ int from_tty;
{
+ printf_filtered ("\"unset\" must be followed by the name of an unset subcommand.\n");
+ help_list (unsetlist, "unset ", -1, gdb_stdout);
+}
+
+void
+_initialize_infcmd ()
+{
+ struct cmd_list_element *c;
+
add_com ("tty", class_run, tty_command,
"Set terminal for future runs of program being debugged.");
- add_com ("set-args", class_run, set_args_command,
- "Specify arguments to give program being debugged when it is started.\n\
-Follow this command with any number of args, to be passed to the program.");
-
- add_info ("environment", environment_info,
- "The environment to give the program, or one variable's value.\n\
+ add_show_from_set
+ (add_set_cmd ("args", class_run, var_string_noescape, (char *)&inferior_args,
+
+"Set arguments to give program being debugged when it is started.\n\
+Follow this command with any number of args, to be passed to the program.",
+ &setlist),
+ &showlist);
+
+ c = add_cmd
+ ("environment", no_class, environment_info,
+ "The environment to give the program, or one variable's value.\n\
With an argument VAR, prints the value of environment variable VAR to\n\
give the program being debugged. With no arguments, prints the entire\n\
-environment to be given to the program.");
-
- add_com ("unset-environment", class_run, unset_environment_command,
- "Cancel environment variable VAR for the program.\n\
-This does not affect the program until the next \"run\" command.");
- add_com ("set-environment", class_run, set_environment_command,
- "Set environment variable value to give the program.\n\
+environment to be given to the program.", &showlist);
+ c->completer = noop_completer;
+
+ add_prefix_cmd ("unset", no_class, unset_command,
+ "Complement to certain \"set\" commands",
+ &unsetlist, "unset ", 0, &cmdlist);
+
+ c = add_cmd ("environment", class_run, unset_environment_command,
+ "Cancel environment variable VAR for the program.\n\
+This does not affect the program until the next \"run\" command.",
+ &unsetlist);
+ c->completer = noop_completer;
+
+ c = add_cmd ("environment", class_run, set_environment_command,
+ "Set environment variable value to give the program.\n\
Arguments are VAR VALUE where VAR is variable name and VALUE is value.\n\
VALUES of environment variables are uninterpreted strings.\n\
-This does not affect the program until the next \"run\" command.");
+This does not affect the program until the next \"run\" command.",
+ &setlist);
+ c->completer = noop_completer;
-#ifdef ATTACH_DETACH
+ add_com ("path", class_files, path_command,
+ "Add directory DIR(s) to beginning of search path for object files.\n\
+$cwd in the path means the current working directory.\n\
+This path is equivalent to the $PATH shell variable. It is a list of\n\
+directories, separated by colons. These directories are searched to find\n\
+fully linked executable files and separately compiled object files as needed.");
+
+ c = add_cmd ("paths", no_class, path_info,
+ "Current search path for finding object files.\n\
+$cwd in the path means the current working directory.\n\
+This path is equivalent to the $PATH shell variable. It is a list of\n\
+directories, separated by colons. These directories are searched to find\n\
+fully linked executable files and separately compiled object files as needed.", &showlist);
+ c->completer = noop_completer;
+
add_com ("attach", class_run, attach_command,
- "Attach to a process that was started up outside of GDB.\n\
-To do this, you must have permission to send the process a signal.\n\
-And it must have the same effective uid as the debugger.\n\n\
-Before using \"attach\", you must use the \"exec-file\" command\n\
-to specify the program running in the process,\n\
-and the \"symbol-file\" command to load its symbol table.");
+ "Attach to a process or file outside of GDB.\n\
+This command attaches to another target, of the same type as your last\n\
+`target' command (`info files' will show your target stack).\n\
+The command may take as argument a process id or a device file.\n\
+For a process id, you must have permission to send the process a signal,\n\
+and it must have the same effective uid as the debugger.\n\
+When using \"attach\", you should use the \"file\" command to specify\n\
+the program running in the process, and to load its symbol table.");
+
add_com ("detach", class_run, detach_command,
- "Detach the process previously attached.\n\
-The process is no longer traced and continues its execution.");
-#endif /* ATTACH_DETACH */
+ "Detach a process or file previously attached.\n\
+If a process, it is no longer traced, and it continues its execution. If you\n\
+were debugging a file, the file is closed and gdb no longer accesses it.");
add_com ("signal", class_run, signal_command,
- "Continue program giving it signal number SIGNUMBER.");
+ "Continue program giving it signal specified by the argument.\n\
+An argument of \"0\" means continue program without giving it a signal.");
add_com ("stepi", class_run, stepi_command,
"Step one instruction exactly.\n\
Argument N means do this N times (or till program stops for another reason).");
add_com_alias ("s", "step", class_run, 1);
+ add_com ("until", class_run, until_command,
+ "Execute until the program reaches a source line greater than the current\n\
+or a specified line or address or function (same args as break command).\n\
+Execution will also stop upon exit from the current stack frame.");
+ add_com_alias ("u", "until", class_run, 1);
+
add_com ("jump", class_run, jump_command,
"Continue program being debugged at specified line or address.\n\
Give as argument either LINENUM or *ADDR, where ADDR is an expression\n\
for an address to start at.");
- add_com ("cont", class_run, cont_command,
+ add_com ("continue", class_run, continue_command,
"Continue program being debugged, after signal or breakpoint.\n\
-If proceeding from breakpoint, a number N may be used as an argument:\n\
-then the same breakpoint won't break until the Nth time it is reached.");
+If proceeding from breakpoint, a number N may be used as an argument,\n\
+which means to set the ignore count of that breakpoint to N - 1 (so that\n\
+the breakpoint won't break until the Nth time it is reached).");
add_com_alias ("c", "cont", class_run, 1);
+ add_com_alias ("fg", "cont", class_run, 1);
add_com ("run", class_run, run_command,
"Start debugged program. You may specify arguments to give it.\n\
Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n\
Input and output redirection with \">\", \"<\", or \">>\" are also allowed.\n\n\
-With no arguments, uses arguments last specified (with \"run\" or \"set-args\".\n\
+With no arguments, uses arguments last specified (with \"run\" or \"set args\").\n\
To cancel previous arguments and run with no arguments,\n\
-use \"set-args\" without arguments.");
+use \"set args\" without arguments.");
add_com_alias ("r", "run", class_run, 1);
- add_info ("registers", registers_info,
- "List of registers and their contents, for selected stack frame.\n\
+ add_info ("registers", nofp_registers_info,
+ "List of integer registers and their contents, for selected stack frame.\n\
+Register name as argument means describe only that register.");
+
+ add_info ("all-registers", all_registers_info,
+"List of all registers and their contents, for selected stack frame.\n\
Register name as argument means describe only that register.");
add_info ("program", program_info,
"Execution status of the program.");
- inferior_args = savestring (" ", 1); /* By default, no args. */
+ add_info ("float", float_info,
+ "Print the status of the floating point unit\n");
+
+ inferior_args = savestring ("", 1); /* Initially no args */
inferior_environ = make_environ ();
init_environ (inferior_environ);
}
-
-END_FILE