#include "exceptions.h"
#include "cli/cli-decode.h"
#include "gdbthread.h"
+#include "valprint.h"
/* Functions exported for general use, in inferior.h: */
static void float_info (char *, int);
-static void detach_command (char *, int);
-
static void disconnect_command (char *, int);
static void unset_environment_command (char *, int);
void _initialize_infcmd (void);
-#define GO_USAGE "Usage: go <location>\n"
-
#define ERROR_NO_INFERIOR \
if (!target_has_execution) error (_("The program is not being run."));
ptid_t inferior_ptid;
-/* Last signal that the inferior received (why it stopped). */
-
-enum target_signal stop_signal;
-
/* Address at which inferior stopped. */
CORE_ADDR stop_pc;
-/* Chain containing status of breakpoint(s) that we have stopped at. */
-
-bpstat stop_bpstat;
-
/* Flag indicating that a command has proceeded the inferior past the
current breakpoint. */
int breakpoint_proceeded;
-/* Nonzero if stopped due to a step command. */
-
-int stop_step;
-
/* Nonzero if stopped due to completion of a stack dummy routine. */
int stop_stack_dummy;
int stopped_by_random_signal;
-/* Range to single step within.
- If this is nonzero, respond to a single-step signal
- by continuing to step if the pc is in this range. */
-
-CORE_ADDR step_range_start; /* Inclusive */
-CORE_ADDR step_range_end; /* Exclusive */
-
-/* Stack frame address as of when stepping command was issued.
- This is how we know when we step into a subroutine call,
- and how to set the frame for the breakpoint used to step out. */
-
-struct frame_id step_frame_id;
-
-enum step_over_calls_kind step_over_calls;
-
-/* If stepping, nonzero means step count is > 1
- so don't print frame next time inferior stops
- if it stops due to stepping. */
-
-int step_multi;
-
/* Environment to use for running inferior,
in format described in environ.h. */
/* We over-compute the size. It shouldn't matter. */
for (i = 0; i < argc; ++i)
- length += 2 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0');
+ length += 3 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0');
result = (char *) xmalloc (length);
out = result;
{
for (cp = argv[i]; *cp; ++cp)
{
- if (strchr (special, *cp) != NULL)
- *out++ = '\\';
- *out++ = *cp;
+ if (*cp == '\n')
+ {
+ /* A newline cannot be quoted with a backslash (it
+ just disappears), only by putting it inside
+ quotes. */
+ *out++ = '\'';
+ *out++ = '\n';
+ *out++ = '\'';
+ }
+ else
+ {
+ if (strchr (special, *cp) != NULL)
+ *out++ = '\\';
+ *out++ = *cp;
+ }
}
}
}
don't need to. */
target_find_description ();
- if (exec_bfd)
+ /* If the solist is global across processes, there's no need to
+ refetch it here. */
+ if (exec_bfd && !gdbarch_has_global_solist (target_gdbarch))
{
/* Sometimes the platform-specific hook loads initial shared
libraries, and sometimes it doesn't. Try to do so first, so
#else
solib_add (NULL, from_tty, target, auto_solib_add);
#endif
+ }
+ if (exec_bfd)
+ {
/* Create the hooks to handle shared library load and unload
events. */
#ifdef SOLIB_CREATE_INFERIOR_HOOK
Start it from the beginning? "))
error (_("Program not restarted."));
target_kill ();
- no_shared_libraries (NULL, from_tty);
- init_wait_for_inferior ();
}
}
dont_repeat ();
kill_if_already_running (from_tty);
+
+ init_wait_for_inferior ();
clear_breakpoint_hit_counts ();
/* Clean up any leftovers from other runs. Some other things from
static int
proceed_thread_callback (struct thread_info *thread, void *arg)
{
+ /* We go through all threads individually instead of compressing
+ into a single target `resume_all' request, because some threads
+ may be stopped in internal breakpoints/events, or stopped waiting
+ for its turn in the displaced stepping queue (that is, they are
+ running && !executing). The target side has no idea about why
+ the thread is stopped, so a `resume_all' command would resume too
+ much. If/when GDB gains a way to tell the target `hold this
+ thread stopped until I say otherwise', then we can optimize
+ this. */
if (!is_stopped (thread->ptid))
return 0;
- context_switch_to (thread->ptid);
+ switch_to_thread (thread->ptid);
clear_proceed_status ();
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
return 0;
stopped at. */
if (args != NULL)
{
- bpstat bs = stop_bpstat;
+ bpstat bs = NULL;
int num, stat;
int stopped = 0;
+ struct thread_info *tp;
+
+ if (non_stop)
+ tp = find_thread_pid (inferior_ptid);
+ else
+ {
+ ptid_t last_ptid;
+ struct target_waitstatus ws;
+
+ get_last_target_status (&last_ptid, &ws);
+ tp = find_thread_pid (last_ptid);
+ }
+ if (tp != NULL)
+ bs = tp->stop_bpstat;
while ((stat = bpstat_num (&bs, &num)) != 0)
if (stat > 0)
make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
}
- /* In synchronous case, all is well, just use the regular for loop. */
+ /* In synchronous case, all is well; each step_once call will step once. */
if (!target_can_async_p ())
{
for (; count > 0; count--)
{
- clear_proceed_status ();
-
- frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
-
- if (!single_inst)
- {
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
- if (step_range_end == 0)
- {
- char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
- error (_("Cannot find bounds of current function"));
+ struct thread_info *tp;
+ step_once (skip_subroutines, single_inst, count, thread);
- target_terminal_ours ();
- printf_filtered (_("\
-Single stepping until exit from function %s, \n\
-which has no line number information.\n"), name);
- }
- }
+ if (target_has_execution
+ && !ptid_equal (inferior_ptid, null_ptid))
+ tp = inferior_thread ();
else
+ tp = NULL;
+
+ if (!tp || !tp->stop_step || !tp->step_multi)
{
- /* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
- if (!skip_subroutines)
- /* It is stepi.
- Don't step over function calls, not even to functions lacking
- line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ /* If we stopped for some reason that is not stepping
+ there are no further steps to make. */
+ if (tp)
+ tp->step_multi = 0;
+ break;
}
-
- if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
-
- step_multi = (count > 1);
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
-
- if (!stop_step)
- break;
}
do_cleanups (cleanups);
- return;
}
- /* In case of asynchronous target things get complicated, do only
- one step for now, before returning control to the event loop. Let
- the continuation figure out how many other steps we need to do,
- and handle them one at the time, through step_once(). */
else
{
+ /* In the case of an asynchronous target things get complicated;
+ do only one step for now, before returning control to the
+ event loop. Let the continuation figure out how many other
+ steps we need to do, and handle them one at the time, through
+ step_once. */
step_once (skip_subroutines, single_inst, count, thread);
+
/* We are running, and the continuation is installed. It will
disable the longjmp breakpoint as appropriate. */
discard_cleanups (cleanups);
{
struct step_1_continuation_args *a = args;
- if (!step_multi || !stop_step)
+ if (target_has_execution)
{
- /* If we stopped for some reason that is not stepping there are
- no further steps to make. Cleanup. */
- if (!a->single_inst || a->skip_subroutines)
- delete_longjmp_breakpoint (a->thread);
- step_multi = 0;
+ struct thread_info *tp;
+
+ tp = inferior_thread ();
+ if (tp->step_multi && tp->stop_step)
+ {
+ /* There are more steps to make, and we did stop due to
+ ending a stepping range. Do another step. */
+ step_once (a->skip_subroutines, a->single_inst,
+ a->count - 1, a->thread);
+ return;
+ }
+ tp->step_multi = 0;
}
- else
- step_once (a->skip_subroutines, a->single_inst, a->count - 1, a->thread);
+
+ /* We either stopped for some reason that is not stepping, or there
+ are no further steps to make. Cleanup. */
+ if (!a->single_inst || a->skip_subroutines)
+ delete_longjmp_breakpoint (a->thread);
}
-/* Do just one step operation. If count >1 we will have to set up a
- continuation to be done after the target stops (after this one
- step). This is useful to implement the 'step n' kind of commands, in
- case of asynchronous targets. We had to split step_1 into two parts,
- one to be done before proceed() and one afterwards. This function is
- called in case of step n with n>1, after the first step operation has
- been completed.*/
-static void
+/* Do just one step operation. This is useful to implement the 'step
+ n' kind of commands. In case of asynchronous targets, we will have
+ to set up a continuation to be done after the target stops (after
+ this one step). For synch targets, the caller handles further
+ stepping. */
+
+static void
step_once (int skip_subroutines, int single_inst, int count, int thread)
{
struct frame_info *frame;
- struct step_1_continuation_args *args;
if (count > 0)
{
+ /* Don't assume THREAD is a valid thread id. It is set to -1 if
+ the longjmp breakpoint was not required. Use the
+ INFERIOR_PTID thread instead, which is the same thread when
+ THREAD is set. */
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
+ tp->step_frame_id = get_frame_id (frame);
if (!single_inst)
{
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
+ CORE_ADDR pc;
+
+ pc = get_frame_pc (frame);
+ find_pc_line_pc_range (pc,
+ &tp->step_range_start, &tp->step_range_end);
/* If we have no line info, switch to stepi mode. */
- if (step_range_end == 0 && step_stop_if_no_debug)
+ if (tp->step_range_end == 0 && step_stop_if_no_debug)
{
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
}
- else if (step_range_end == 0)
+ else if (tp->step_range_end == 0)
{
char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
+ if (find_pc_partial_function (pc, &name,
+ &tp->step_range_start,
+ &tp->step_range_end) == 0)
error (_("Cannot find bounds of current function"));
target_terminal_ours ();
else
{
/* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
if (!skip_subroutines)
/* It is stepi.
Don't step over function calls, not even to functions lacking
line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ tp->step_over_calls = STEP_OVER_NONE;
}
if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
+ tp->step_over_calls = STEP_OVER_ALL;
- step_multi = (count > 1);
+ tp->step_multi = (count > 1);
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
- args = xmalloc (sizeof (*args));
- args->skip_subroutines = skip_subroutines;
- args->single_inst = single_inst;
- args->count = count;
- args->thread = thread;
- add_intermediate_continuation (step_1_continuation, args, xfree);
+ /* For async targets, register a continuation to do any
+ additional steps. For sync targets, the caller will handle
+ further stepping. */
+ if (target_can_async_p ())
+ {
+ struct step_1_continuation_args *args;
+
+ args = xmalloc (sizeof (*args));
+ args->skip_subroutines = skip_subroutines;
+ args->single_inst = single_inst;
+ args->count = count;
+ args->thread = thread;
+
+ add_intermediate_continuation (tp, step_1_continuation, args, xfree);
+ }
}
}
go_command (char *line_no, int from_tty)
{
if (line_no == (char *) NULL || !*line_no)
- printf_filtered (GO_USAGE);
+ printf_filtered (_("Usage: go <location>\n"));
else
{
tbreak_command (line_no, from_tty);
CORE_ADDR pc;
struct symbol *func;
struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
than the current line (if in symbolic section) or pc (if
not). */
- pc = read_pc ();
+ pc = get_frame_pc (frame);
func = find_pc_function (pc);
if (!func)
if (msymbol == NULL)
error (_("Execution is not within a known function."));
- step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
- step_range_end = pc;
+ tp->step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
+ tp->step_range_end = pc;
}
else
{
sal = find_pc_line (pc, 0);
- step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
- step_range_end = sal.end;
+ tp->step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+ tp->step_range_end = sal.end;
}
- step_over_calls = STEP_OVER_ALL;
- step_frame_id = get_frame_id (frame);
+ tp->step_over_calls = STEP_OVER_ALL;
+ tp->step_frame_id = get_frame_id (frame);
- step_multi = 0; /* Only one call to proceed */
+ tp->step_multi = 0; /* Only one call to proceed */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
}
if (value)
{
+ struct value_print_options opts;
+
/* Print it. */
stb = ui_out_stream_new (uiout);
old_chain = make_cleanup_ui_out_stream_delete (stb);
ui_out_field_fmt (uiout, "gdb-result-var", "$%d",
record_latest_value (value));
ui_out_text (uiout, " = ");
- value_print (value, stb->stream, 0, Val_no_prettyprint);
+ get_raw_print_options (&opts);
+ value_print (value, stb->stream, &opts);
ui_out_field_stream (uiout, "return-value", stb);
ui_out_text (uiout, "\n");
do_cleanups (old_chain);
{
struct finish_command_continuation_args *a = arg;
- if (bpstat_find_breakpoint (stop_bpstat, a->breakpoint) != NULL
+ bpstat bs = NULL;
+
+ if (!ptid_equal (inferior_ptid, null_ptid)
+ && target_has_execution
+ && is_stopped (inferior_ptid))
+ bs = inferior_thread ()->stop_bpstat;
+
+ if (bpstat_find_breakpoint (bs, a->breakpoint) != NULL
&& a->function != NULL)
{
struct type *value_type;
next stop will be in the same thread that we started doing a
finish on. This suppressing (or some other replacement means)
should be a thread property. */
- observer_notify_normal_stop (stop_bpstat);
+ observer_notify_normal_stop (bs);
suppress_stop_observer = 0;
delete_breakpoint (a->breakpoint);
}
xfree (arg);
}
+/* finish_backward -- helper function for finish_command. */
+
+static void
+finish_backward (struct symbol *function)
+{
+ struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+ CORE_ADDR pc;
+ CORE_ADDR func_addr;
+ int back_up;
+
+ pc = get_frame_pc (get_current_frame ());
+
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL) == 0)
+ internal_error (__FILE__, __LINE__,
+ _("Finish: couldn't find function."));
+
+ sal = find_pc_line (func_addr, 0);
+
+ /* We don't need a return value. */
+ tp->proceed_to_finish = 0;
+ /* Special case: if we're sitting at the function entry point,
+ then all we need to do is take a reverse singlestep. We
+ don't need to set a breakpoint, and indeed it would do us
+ no good to do so.
+
+ Note that this can only happen at frame #0, since there's
+ no way that a function up the stack can have a return address
+ that's equal to its entry point. */
+
+ if (sal.pc != pc)
+ {
+ /* Set breakpoint and continue. */
+ breakpoint =
+ set_momentary_breakpoint (sal,
+ get_frame_id (get_selected_frame (NULL)),
+ bp_breakpoint);
+ /* Tell the breakpoint to keep quiet. We won't be done
+ until we've done another reverse single-step. */
+ make_breakpoint_silent (breakpoint);
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ /* We will be stopped when proceed returns. */
+ back_up = bpstat_find_breakpoint (tp->stop_bpstat, breakpoint) != NULL;
+ do_cleanups (old_chain);
+ }
+ else
+ back_up = 1;
+ if (back_up)
+ {
+ /* If in fact we hit the step-resume breakpoint (and not
+ some other breakpoint), then we're almost there --
+ we just need to back up by one more single-step. */
+ tp->step_range_start = tp->step_range_end = 1;
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+ }
+ return;
+}
+
+/* finish_forward -- helper function for finish_command. */
+
+static void
+finish_forward (struct symbol *function, struct frame_info *frame)
+{
+ struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+ struct finish_command_continuation_args *cargs;
+
+ sal = find_pc_line (get_frame_pc (frame), 0);
+ sal.pc = get_frame_pc (frame);
+
+ breakpoint = set_momentary_breakpoint (sal, get_frame_id (frame),
+ bp_finish);
+
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
+
+ tp->proceed_to_finish = 1; /* We want stop_registers, please... */
+ make_cleanup_restore_integer (&suppress_stop_observer);
+ suppress_stop_observer = 1;
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+
+ cargs = xmalloc (sizeof (*cargs));
+
+ cargs->breakpoint = breakpoint;
+ cargs->function = function;
+ add_continuation (tp, finish_command_continuation, cargs,
+ finish_command_continuation_free_arg);
+
+ discard_cleanups (old_chain);
+ if (!target_can_async_p ())
+ do_all_continuations ();
+}
+
/* "finish": Set a temporary breakpoint at the place the selected
frame will return to, then continue. */
static void
finish_command (char *arg, int from_tty)
{
- struct symtab_and_line sal;
struct frame_info *frame;
struct symbol *function;
- struct breakpoint *breakpoint;
- struct cleanup *old_chain;
- struct finish_command_continuation_args *cargs;
int async_exec = 0;
if (async_exec && !target_can_async_p ())
error (_("Asynchronous execution not supported on this target."));
+ /* Don't try to async in reverse. */
+ if (async_exec && execution_direction == EXEC_REVERSE)
+ error (_("Asynchronous 'finish' not supported in reverse."));
+
/* If we are not asked to run in the bg, then prepare to run in the
foreground, synchronously. */
if (!async_exec && target_can_async_p ())
clear_proceed_status ();
- sal = find_pc_line (get_frame_pc (frame), 0);
- sal.pc = get_frame_pc (frame);
-
- breakpoint = set_momentary_breakpoint (sal, get_frame_id (frame), bp_finish);
-
- old_chain = make_cleanup_delete_breakpoint (breakpoint);
-
/* Find the function we will return from. */
function = find_pc_function (get_frame_pc (get_selected_frame (NULL)));
source. */
if (from_tty)
{
- printf_filtered (_("Run till exit from "));
+ if (execution_direction == EXEC_REVERSE)
+ printf_filtered (_("Run back to call of "));
+ else
+ printf_filtered (_("Run till exit from "));
+
print_stack_frame (get_selected_frame (NULL), 1, LOCATION);
}
- proceed_to_finish = 1; /* We want stop_registers, please... */
- make_cleanup_restore_integer (&suppress_stop_observer);
- suppress_stop_observer = 1;
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
-
- cargs = xmalloc (sizeof (*cargs));
-
- cargs->breakpoint = breakpoint;
- cargs->function = function;
- add_continuation (finish_command_continuation, cargs,
- finish_command_continuation_free_arg);
-
- discard_cleanups (old_chain);
- if (!target_can_async_p ())
- do_all_continuations ();
+ if (execution_direction == EXEC_REVERSE)
+ finish_backward (function);
+ else
+ finish_forward (function, frame);
}
\f
static void
program_info (char *args, int from_tty)
{
- bpstat bs = stop_bpstat;
- int num;
- int stat = bpstat_num (&bs, &num);
+ bpstat bs;
+ int num, stat;
+ struct thread_info *tp;
+ ptid_t ptid;
if (!target_has_execution)
{
return;
}
+ if (non_stop)
+ ptid = inferior_ptid;
+ else
+ {
+ struct target_waitstatus ws;
+ get_last_target_status (&ptid, &ws);
+ }
+
+ if (ptid_equal (ptid, null_ptid) || is_exited (ptid))
+ error (_("Invalid selected thread."));
+ else if (is_running (ptid))
+ error (_("Selected thread is running."));
+
+ tp = find_thread_pid (ptid);
+ bs = tp->stop_bpstat;
+ stat = bpstat_num (&bs, &num);
+
target_files_info ();
printf_filtered (_("Program stopped at %s.\n"),
hex_string ((unsigned long) stop_pc));
- if (stop_step)
+ if (tp->stop_step)
printf_filtered (_("It stopped after being stepped.\n"));
else if (stat != 0)
{
stat = bpstat_num (&bs, &num);
}
}
- else if (stop_signal != TARGET_SIGNAL_0)
+ else if (tp->stop_signal != TARGET_SIGNAL_0)
{
printf_filtered (_("It stopped with signal %s, %s.\n"),
- target_signal_to_name (stop_signal),
- target_signal_to_string (stop_signal));
+ target_signal_to_name (tp->stop_signal),
+ target_signal_to_string (tp->stop_signal));
}
if (!from_tty)
|| TYPE_CODE (register_type (gdbarch, i)) == TYPE_CODE_DECFLOAT)
{
int j;
+ struct value_print_options opts;
+ get_user_print_options (&opts);
+ opts.deref_ref = 1;
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 0, 1, 0, Val_pretty_default, current_language);
+ file, 0, &opts, current_language);
fprintf_filtered (file, "\t(raw 0x");
for (j = 0; j < register_size (gdbarch, i); j++)
}
else
{
+ struct value_print_options opts;
+
/* Print the register in hex. */
+ get_formatted_print_options (&opts, 'x');
+ opts.deref_ref = 1;
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 'x', 1, 0, Val_pretty_default, current_language);
+ file, 0, &opts,
+ current_language);
/* If not a vector register, print it also according to its
natural format. */
if (TYPE_VECTOR (register_type (gdbarch, i)) == 0)
{
+ get_user_print_options (&opts);
+ opts.deref_ref = 1;
fprintf_filtered (file, "\t");
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 0, 1, 0, Val_pretty_default, current_language);
+ file, 0, &opts, current_language);
}
}
if (regnum >= gdbarch_num_regs (gdbarch)
+ gdbarch_num_pseudo_regs (gdbarch))
{
+ struct value_print_options opts;
struct value *val = value_of_user_reg (regnum, frame);
printf_filtered ("%s: ", start);
+ get_formatted_print_options (&opts, 'x');
print_scalar_formatted (value_contents (val),
check_typedef (value_type (val)),
- 'x', 0, gdb_stdout);
+ &opts, 0, gdb_stdout);
printf_filtered ("\n");
}
else
}
\f
+/* Used in `attach&' command. ARG is a point to an integer
+ representing a process id. Proceed threads of this process iff
+ they stopped due to debugger request, and when they did, they
+ reported a clean stop (TARGET_SIGNAL_0). Do not proceed threads
+ that have been explicitly been told to stop. */
+
+static int
+proceed_after_attach_callback (struct thread_info *thread,
+ void *arg)
+{
+ int pid = * (int *) arg;
+
+ if (ptid_get_pid (thread->ptid) == pid
+ && !is_exited (thread->ptid)
+ && !is_executing (thread->ptid)
+ && !thread->stop_requested
+ && thread->stop_signal == TARGET_SIGNAL_0)
+ {
+ switch_to_thread (thread->ptid);
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+
+ return 0;
+}
+
+static void
+proceed_after_attach (int pid)
+{
+ /* Don't error out if the current thread is running, because
+ there may be other stopped threads. */
+ struct cleanup *old_chain;
+
+ /* Backup current thread and selected frame. */
+ old_chain = make_cleanup_restore_current_thread ();
+
+ iterate_over_threads (proceed_after_attach_callback, &pid);
+
+ /* Restore selected ptid. */
+ do_cleanups (old_chain);
+}
+
/*
* TODO:
* Should save/restore the tty state since it might be that the
{
char *exec_file;
char *full_exec_path = NULL;
+ struct inferior *inferior;
- stop_soon = NO_STOP_QUIETLY;
+ inferior = current_inferior ();
+ inferior->stop_soon = NO_STOP_QUIETLY;
/* If no exec file is yet known, try to determine it from the
process itself. */
target_terminal_inferior ();
if (async_exec)
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
+ {
+ /* The user requested an `attach&', so be sure to leave threads
+ that didn't get a signal running. */
+
+ /* Immediatelly resume all suspended threads of this inferior,
+ and this inferior only. This should have no effect on
+ already running threads. If a thread has been stopped with a
+ signal, leave it be. */
+ if (non_stop)
+ proceed_after_attach (inferior->pid);
+ else
+ {
+ if (inferior_thread ()->stop_signal == TARGET_SIGNAL_0)
+ {
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+ }
+ }
else
{
+ /* The user requested a plain `attach', so be sure to leave
+ the inferior stopped. */
+
if (target_can_async_p ())
async_enable_stdin ();
+
+ /* At least the current thread is already stopped. */
+
+ /* In all-stop, by definition, all threads have to be already
+ stopped at this point. In non-stop, however, although the
+ selected thread is stopped, others may still be executing.
+ Be sure to explicitly stop all threads of the process. This
+ should have no effect on already stopped threads. */
+ if (non_stop)
+ target_stop (pid_to_ptid (inferior->pid));
+
+ /* Tell the user/frontend where we're stopped. */
normal_stop ();
if (deprecated_attach_hook)
deprecated_attach_hook ();
char *exec_file;
char *full_exec_path = NULL;
int async_exec = 0;
+ struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
dont_repeat (); /* Not for the faint of heart */
- if (target_has_execution)
+ if (target_supports_multi_process ())
+ /* Don't complain if we can be attached to multiple processes. */
+ ;
+ else if (target_has_execution)
{
if (query ("A program is being debugged already. Kill it? "))
target_kill ();
{
/* Simulate synchronous execution */
async_disable_stdin ();
+ make_cleanup ((make_cleanup_ftype *)async_enable_stdin, NULL);
}
target_attach (args, from_tty);
init_wait_for_inferior ();
clear_proceed_status ();
+ if (non_stop)
+ {
+ /* If we find that the current thread isn't stopped, explicitly
+ do so now, because we're going to install breakpoints and
+ poke at memory. */
+
+ if (async_exec)
+ /* The user requested an `attach&'; stop just one thread. */
+ target_stop (inferior_ptid);
+ else
+ /* The user requested an `attach', so stop all threads of this
+ inferior. */
+ target_stop (pid_to_ptid (ptid_get_pid (inferior_ptid)));
+ }
+
/* Some system don't generate traps when attaching to inferior.
E.g. Mach 3 or GNU hurd. */
if (!target_attach_no_wait)
{
+ struct inferior *inferior = current_inferior ();
+
/* Careful here. See comments in inferior.h. Basically some
OSes don't ignore SIGSTOPs on continue requests anymore. We
need a way for handle_inferior_event to reset the stop_signal
variable after an attach, and this is what
STOP_QUIETLY_NO_SIGSTOP is for. */
- stop_soon = STOP_QUIETLY_NO_SIGSTOP;
+ inferior->stop_soon = STOP_QUIETLY_NO_SIGSTOP;
if (target_can_async_p ())
{
a->args = xstrdup (args);
a->from_tty = from_tty;
a->async_exec = async_exec;
- add_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+ discard_cleanups (back_to);
return;
}
}
attach_command_post_wait (args, from_tty, async_exec);
+ discard_cleanups (back_to);
}
/*
* started via the normal ptrace (PTRACE_TRACEME).
*/
-static void
+void
detach_command (char *args, int from_tty)
{
dont_repeat (); /* Not for the faint of heart. */
target_detach (args, from_tty);
- no_shared_libraries (NULL, from_tty);
- init_thread_list ();
+
+ /* If the solist is global across inferiors, don't clear it when we
+ detach from a single inferior. */
+ if (!gdbarch_has_global_solist (target_gdbarch))
+ no_shared_libraries (NULL, from_tty);
+
+ /* If the current target interface claims there's still execution,
+ then don't mess with threads of other processes. */
+ if (!target_has_execution)
+ init_thread_list ();
+
if (deprecated_detach_hook)
deprecated_detach_hook ();
}
else
ptid = inferior_ptid;
target_stop (ptid);
+
+ /* Tag the thread as having been explicitly requested to stop, so
+ other parts of gdb know not to resume this thread automatically,
+ if it was stopped due to an internal event. Limit this to
+ non-stop mode, as when debugging a multi-threaded application in
+ all-stop mode, we will only get one stop event --- it's undefined
+ which thread will report the event. */
+ if (non_stop)
+ set_stop_requested (ptid, 1);
}
/* Stop the execution of the target while running in async mode, in