#include "target-descriptions.h"
#include "user-regs.h"
#include "exceptions.h"
+#include "cli/cli-decode.h"
+#include "gdbthread.h"
+#include "valprint.h"
/* Functions exported for general use, in inferior.h: */
static void nofp_registers_info (char *, int);
-static void print_return_value (struct type *value_type);
-
-static void finish_command_continuation (struct continuation_arg *);
+static void print_return_value (struct type *func_type,
+ struct type *value_type);
static void until_next_command (int);
static void float_info (char *, int);
-static void detach_command (char *, int);
-
static void disconnect_command (char *, int);
static void unset_environment_command (char *, int);
static void jump_command (char *, int);
static void step_1 (int, int, char *);
-static void step_once (int skip_subroutines, int single_inst, int count);
-static void step_1_continuation (struct continuation_arg *arg);
+static void step_once (int skip_subroutines, int single_inst, int count, int thread);
static void next_command (char *, int);
void _initialize_infcmd (void);
-#define GO_USAGE "Usage: go <location>\n"
-
#define ERROR_NO_INFERIOR \
if (!target_has_execution) error (_("The program is not being run."));
ptid_t inferior_ptid;
-/* Last signal that the inferior received (why it stopped). */
-
-enum target_signal stop_signal;
-
/* Address at which inferior stopped. */
CORE_ADDR stop_pc;
-/* Chain containing status of breakpoint(s) that we have stopped at. */
-
-bpstat stop_bpstat;
-
/* Flag indicating that a command has proceeded the inferior past the
current breakpoint. */
int breakpoint_proceeded;
-/* Nonzero if stopped due to a step command. */
-
-int stop_step;
-
/* Nonzero if stopped due to completion of a stack dummy routine. */
int stop_stack_dummy;
int stopped_by_random_signal;
-/* Range to single step within.
- If this is nonzero, respond to a single-step signal
- by continuing to step if the pc is in this range. */
-
-CORE_ADDR step_range_start; /* Inclusive */
-CORE_ADDR step_range_end; /* Exclusive */
-
-/* Stack frame address as of when stepping command was issued.
- This is how we know when we step into a subroutine call,
- and how to set the frame for the breakpoint used to step out. */
-
-struct frame_id step_frame_id;
-
-enum step_over_calls_kind step_over_calls;
-
-/* If stepping, nonzero means step count is > 1
- so don't print frame next time inferior stops
- if it stops due to stepping. */
-
-int step_multi;
-
/* Environment to use for running inferior,
in format described in environ.h. */
struct gdb_environ *inferior_environ;
+
+/* When set, no calls to target_resumed observer will be made. */
+int suppress_resume_observer = 0;
+/* When set, normal_stop will not call the normal_stop observer. */
+int suppress_stop_observer = 0;
\f
/* Accessor routines. */
/* We over-compute the size. It shouldn't matter. */
for (i = 0; i < argc; ++i)
- length += 2 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0');
+ length += 3 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0');
result = (char *) xmalloc (length);
out = result;
{
for (cp = argv[i]; *cp; ++cp)
{
- if (strchr (special, *cp) != NULL)
- *out++ = '\\';
- *out++ = *cp;
+ if (*cp == '\n')
+ {
+ /* A newline cannot be quoted with a backslash (it
+ just disappears), only by putting it inside
+ quotes. */
+ *out++ = '\'';
+ *out++ = '\n';
+ *out++ = '\'';
+ }
+ else
+ {
+ if (strchr (special, *cp) != NULL)
+ *out++ = '\\';
+ *out++ = *cp;
+ }
}
}
}
don't need to. */
target_find_description ();
- if (exec_bfd)
+ /* If the solist is global across processes, there's no need to
+ refetch it here. */
+ if (exec_bfd && !gdbarch_has_global_solist (target_gdbarch))
{
/* Sometimes the platform-specific hook loads initial shared
libraries, and sometimes it doesn't. Try to do so first, so
#else
solib_add (NULL, from_tty, target, auto_solib_add);
#endif
+ }
+ if (exec_bfd)
+ {
/* Create the hooks to handle shared library load and unload
events. */
#ifdef SOLIB_CREATE_INFERIOR_HOOK
Start it from the beginning? "))
error (_("Program not restarted."));
target_kill ();
- no_shared_libraries (NULL, from_tty);
- init_wait_for_inferior ();
}
}
dont_repeat ();
kill_if_already_running (from_tty);
+
+ init_wait_for_inferior ();
clear_breakpoint_hit_counts ();
/* Clean up any leftovers from other runs. Some other things from
this function should probably be moved into target_pre_inferior. */
target_pre_inferior (from_tty);
- /* Purge old solib objfiles. */
- objfile_purge_solibs ();
-
- clear_solib ();
-
/* The comment here used to read, "The exec file is re-read every
time we do a generic_mourn_inferior, so we just have to worry
about the symbol file." The `generic_mourn_inferior' function
exec_file = (char *) get_exec_file (0);
+ if (non_stop && !target_supports_non_stop ())
+ error (_("The target does not support running in non-stop mode."));
+
/* We keep symbols from add-symbol-file, on the grounds that the
user might want to add some symbols before running the program
(right?). But sometimes (dynamic loading where the user manually
run_command_1 (args, from_tty, 1);
}
+static int
+proceed_thread_callback (struct thread_info *thread, void *arg)
+{
+ /* We go through all threads individually instead of compressing
+ into a single target `resume_all' request, because some threads
+ may be stopped in internal breakpoints/events, or stopped waiting
+ for its turn in the displaced stepping queue (that is, they are
+ running && !executing). The target side has no idea about why
+ the thread is stopped, so a `resume_all' command would resume too
+ much. If/when GDB gains a way to tell the target `hold this
+ thread stopped until I say otherwise', then we can optimize
+ this. */
+ if (!is_stopped (thread->ptid))
+ return 0;
+
+ switch_to_thread (thread->ptid);
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ return 0;
+}
+
void
-continue_command (char *proc_count_exp, int from_tty)
+continue_1 (int all_threads)
+{
+ ERROR_NO_INFERIOR;
+
+ if (non_stop && all_threads)
+ {
+ /* Don't error out if the current thread is running, because
+ there may be other stopped threads. */
+ struct cleanup *old_chain;
+
+ /* Backup current thread and selected frame. */
+ old_chain = make_cleanup_restore_current_thread ();
+
+ iterate_over_threads (proceed_thread_callback, NULL);
+
+ /* Restore selected ptid. */
+ do_cleanups (old_chain);
+ }
+ else
+ {
+ ensure_not_running ();
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+}
+
+/* continue [-a] [proceed-count] [&] */
+void
+continue_command (char *args, int from_tty)
{
int async_exec = 0;
+ int all_threads = 0;
ERROR_NO_INFERIOR;
/* Find out whether we must run in the background. */
- if (proc_count_exp != NULL)
- async_exec = strip_bg_char (&proc_count_exp);
+ if (args != NULL)
+ async_exec = strip_bg_char (&args);
/* If we must run in the background, but the target can't do it,
error out. */
async_disable_stdin ();
}
- /* If have argument (besides '&'), set proceed count of breakpoint
- we stopped at. */
- if (proc_count_exp != NULL)
+ if (args != NULL)
+ {
+ if (strncmp (args, "-a", sizeof ("-a") - 1) == 0)
+ {
+ all_threads = 1;
+ args += sizeof ("-a") - 1;
+ if (*args == '\0')
+ args = NULL;
+ }
+ }
+
+ if (!non_stop && all_threads)
+ error (_("`-a' is meaningless in all-stop mode."));
+
+ if (args != NULL && all_threads)
+ error (_("\
+Can't resume all threads and specify proceed count simultaneously."));
+
+ /* If we have an argument left, set proceed count of breakpoint we
+ stopped at. */
+ if (args != NULL)
{
- bpstat bs = stop_bpstat;
+ bpstat bs = NULL;
int num, stat;
int stopped = 0;
+ struct thread_info *tp;
+
+ if (non_stop)
+ tp = find_thread_pid (inferior_ptid);
+ else
+ {
+ ptid_t last_ptid;
+ struct target_waitstatus ws;
+
+ get_last_target_status (&last_ptid, &ws);
+ tp = find_thread_pid (last_ptid);
+ }
+ if (tp != NULL)
+ bs = tp->stop_bpstat;
while ((stat = bpstat_num (&bs, &num)) != 0)
if (stat > 0)
{
set_ignore_count (num,
- parse_and_eval_long (proc_count_exp) - 1,
+ parse_and_eval_long (args) - 1,
from_tty);
/* set_ignore_count prints a message ending with a period.
So print two spaces before "Continuing.". */
if (from_tty)
printf_filtered (_("Continuing.\n"));
- clear_proceed_status ();
-
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ continue_1 (all_threads);
}
\f
/* Step until outside of current statement. */
}
static void
-disable_longjmp_breakpoint_cleanup (void *ignore)
+delete_longjmp_breakpoint_cleanup (void *arg)
{
- disable_longjmp_breakpoint ();
+ int thread = * (int *) arg;
+ delete_longjmp_breakpoint (thread);
}
static void
{
int count = 1;
struct frame_info *frame;
- struct cleanup *cleanups = 0;
+ struct cleanup *cleanups = make_cleanup (null_cleanup, NULL);
int async_exec = 0;
+ int thread = -1;
ERROR_NO_INFERIOR;
+ ensure_not_running ();
if (count_string)
async_exec = strip_bg_char (&count_string);
if (!single_inst || skip_subroutines) /* leave si command alone */
{
- enable_longjmp_breakpoint ();
- if (!target_can_async_p ())
- cleanups = make_cleanup (disable_longjmp_breakpoint_cleanup, 0 /*ignore*/);
- else
- make_exec_cleanup (disable_longjmp_breakpoint_cleanup, 0 /*ignore*/);
+ if (in_thread_list (inferior_ptid))
+ thread = pid_to_thread_id (inferior_ptid);
+
+ set_longjmp_breakpoint ();
+
+ make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
}
- /* In synchronous case, all is well, just use the regular for loop. */
+ /* In synchronous case, all is well; each step_once call will step once. */
if (!target_can_async_p ())
{
for (; count > 0; count--)
{
- clear_proceed_status ();
+ struct thread_info *tp;
+ step_once (skip_subroutines, single_inst, count, thread);
- frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
-
- if (!single_inst)
- {
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
- if (step_range_end == 0)
- {
- char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
- error (_("Cannot find bounds of current function"));
-
- target_terminal_ours ();
- printf_filtered (_("\
-Single stepping until exit from function %s, \n\
-which has no line number information.\n"), name);
- }
- }
+ if (target_has_execution
+ && !ptid_equal (inferior_ptid, null_ptid))
+ tp = inferior_thread ();
else
+ tp = NULL;
+
+ if (!tp || !tp->stop_step || !tp->step_multi)
{
- /* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
- if (!skip_subroutines)
- /* It is stepi.
- Don't step over function calls, not even to functions lacking
- line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ /* If we stopped for some reason that is not stepping
+ there are no further steps to make. */
+ if (tp)
+ tp->step_multi = 0;
+ break;
}
-
- if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
-
- step_multi = (count > 1);
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
-
- if (!stop_step)
- break;
}
- if (!single_inst || skip_subroutines)
- do_cleanups (cleanups);
- return;
+ do_cleanups (cleanups);
}
- /* In case of asynchronous target things get complicated, do only
- one step for now, before returning control to the event loop. Let
- the continuation figure out how many other steps we need to do,
- and handle them one at the time, through step_once(). */
else
{
- if (target_can_async_p ())
- step_once (skip_subroutines, single_inst, count);
+ /* In the case of an asynchronous target things get complicated;
+ do only one step for now, before returning control to the
+ event loop. Let the continuation figure out how many other
+ steps we need to do, and handle them one at the time, through
+ step_once. */
+ step_once (skip_subroutines, single_inst, count, thread);
+
+ /* We are running, and the continuation is installed. It will
+ disable the longjmp breakpoint as appropriate. */
+ discard_cleanups (cleanups);
}
}
+struct step_1_continuation_args
+{
+ int count;
+ int skip_subroutines;
+ int single_inst;
+ int thread;
+};
+
/* Called after we are done with one step operation, to check whether
we need to step again, before we print the prompt and return control
to the user. If count is > 1, we will need to do one more call to
proceed(), via step_once(). Basically it is like step_once and
step_1_continuation are co-recursive. */
static void
-step_1_continuation (struct continuation_arg *arg)
+step_1_continuation (void *args)
{
- int count;
- int skip_subroutines;
- int single_inst;
+ struct step_1_continuation_args *a = args;
+
+ if (target_has_execution)
+ {
+ struct thread_info *tp;
- skip_subroutines = arg->data.integer;
- single_inst = arg->next->data.integer;
- count = arg->next->next->data.integer;
+ tp = inferior_thread ();
+ if (tp->step_multi && tp->stop_step)
+ {
+ /* There are more steps to make, and we did stop due to
+ ending a stepping range. Do another step. */
+ step_once (a->skip_subroutines, a->single_inst,
+ a->count - 1, a->thread);
+ return;
+ }
+ tp->step_multi = 0;
+ }
- if (stop_step)
- step_once (skip_subroutines, single_inst, count - 1);
- else
- if (!single_inst || skip_subroutines)
- do_exec_cleanups (ALL_CLEANUPS);
-}
-
-/* Do just one step operation. If count >1 we will have to set up a
- continuation to be done after the target stops (after this one
- step). This is useful to implement the 'step n' kind of commands, in
- case of asynchronous targets. We had to split step_1 into two parts,
- one to be done before proceed() and one afterwards. This function is
- called in case of step n with n>1, after the first step operation has
- been completed.*/
-static void
-step_once (int skip_subroutines, int single_inst, int count)
-{
- struct continuation_arg *arg1;
- struct continuation_arg *arg2;
- struct continuation_arg *arg3;
+ /* We either stopped for some reason that is not stepping, or there
+ are no further steps to make. Cleanup. */
+ if (!a->single_inst || a->skip_subroutines)
+ delete_longjmp_breakpoint (a->thread);
+}
+
+/* Do just one step operation. This is useful to implement the 'step
+ n' kind of commands. In case of asynchronous targets, we will have
+ to set up a continuation to be done after the target stops (after
+ this one step). For synch targets, the caller handles further
+ stepping. */
+
+static void
+step_once (int skip_subroutines, int single_inst, int count, int thread)
+{
struct frame_info *frame;
if (count > 0)
{
+ /* Don't assume THREAD is a valid thread id. It is set to -1 if
+ the longjmp breakpoint was not required. Use the
+ INFERIOR_PTID thread instead, which is the same thread when
+ THREAD is set. */
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
+ tp->step_frame_id = get_frame_id (frame);
if (!single_inst)
{
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
+ CORE_ADDR pc;
+
+ pc = get_frame_pc (frame);
+ find_pc_line_pc_range (pc,
+ &tp->step_range_start, &tp->step_range_end);
/* If we have no line info, switch to stepi mode. */
- if (step_range_end == 0 && step_stop_if_no_debug)
+ if (tp->step_range_end == 0 && step_stop_if_no_debug)
{
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
}
- else if (step_range_end == 0)
+ else if (tp->step_range_end == 0)
{
char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
+ if (find_pc_partial_function (pc, &name,
+ &tp->step_range_start,
+ &tp->step_range_end) == 0)
error (_("Cannot find bounds of current function"));
target_terminal_ours ();
else
{
/* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
if (!skip_subroutines)
/* It is stepi.
Don't step over function calls, not even to functions lacking
line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ tp->step_over_calls = STEP_OVER_NONE;
}
if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
-
- step_multi = (count > 1);
- arg1 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg2 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg3 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg1->next = arg2;
- arg1->data.integer = skip_subroutines;
- arg2->next = arg3;
- arg2->data.integer = single_inst;
- arg3->next = NULL;
- arg3->data.integer = count;
- add_intermediate_continuation (step_1_continuation, arg1);
+ tp->step_over_calls = STEP_OVER_ALL;
+
+ tp->step_multi = (count > 1);
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+
+ /* For async targets, register a continuation to do any
+ additional steps. For sync targets, the caller will handle
+ further stepping. */
+ if (target_can_async_p ())
+ {
+ struct step_1_continuation_args *args;
+
+ args = xmalloc (sizeof (*args));
+ args->skip_subroutines = skip_subroutines;
+ args->single_inst = single_inst;
+ args->count = count;
+ args->thread = thread;
+
+ add_intermediate_continuation (tp, step_1_continuation, args, xfree);
+ }
}
}
int async_exec = 0;
ERROR_NO_INFERIOR;
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (arg != NULL)
if (async_exec && !target_can_async_p ())
error (_("Asynchronous execution not supported on this target."));
- /* If we are not asked to run in the bg, then prepare to run in the
- foreground, synchronously. */
- if (!async_exec && target_can_async_p ())
- {
- /* Simulate synchronous execution */
- async_disable_stdin ();
- }
-
if (!arg)
error_no_arg (_("starting address"));
if (sfn != NULL)
{
fixup_symbol_section (sfn, 0);
- if (section_is_overlay (SYMBOL_BFD_SECTION (sfn)) &&
- !section_is_mapped (SYMBOL_BFD_SECTION (sfn)))
+ if (section_is_overlay (SYMBOL_OBJ_SECTION (sfn)) &&
+ !section_is_mapped (SYMBOL_OBJ_SECTION (sfn)))
{
if (!query ("WARNING!!! Destination is in unmapped overlay! Jump anyway? "))
{
printf_filtered (".\n");
}
+ /* If we are not asked to run in the bg, then prepare to run in the
+ foreground, synchronously. */
+ if (!async_exec && target_can_async_p ())
+ {
+ /* Simulate synchronous execution */
+ async_disable_stdin ();
+ }
+
clear_proceed_status ();
proceed (addr, TARGET_SIGNAL_0, 0);
}
go_command (char *line_no, int from_tty)
{
if (line_no == (char *) NULL || !*line_no)
- printf_filtered (GO_USAGE);
+ printf_filtered (_("Usage: go <location>\n"));
else
{
tbreak_command (line_no, from_tty);
dont_repeat (); /* Too dangerous. */
ERROR_NO_INFERIOR;
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (signum_exp != NULL)
CORE_ADDR pc;
struct symbol *func;
struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
than the current line (if in symbolic section) or pc (if
not). */
- pc = read_pc ();
+ pc = get_frame_pc (frame);
func = find_pc_function (pc);
if (!func)
if (msymbol == NULL)
error (_("Execution is not within a known function."));
- step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
- step_range_end = pc;
+ tp->step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
+ tp->step_range_end = pc;
}
else
{
sal = find_pc_line (pc, 0);
- step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
- step_range_end = sal.end;
+ tp->step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+ tp->step_range_end = sal.end;
}
- step_over_calls = STEP_OVER_ALL;
- step_frame_id = get_frame_id (frame);
+ tp->step_over_calls = STEP_OVER_ALL;
+ tp->step_frame_id = get_frame_id (frame);
- step_multi = 0; /* Only one call to proceed */
+ tp->step_multi = 0; /* Only one call to proceed */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
}
/* Print the result of a function at the end of a 'finish' command. */
static void
-print_return_value (struct type *value_type)
+print_return_value (struct type *func_type, struct type *value_type)
{
struct gdbarch *gdbarch = current_gdbarch;
struct cleanup *old_chain;
inferior function call code. In fact, when inferior function
calls are made async, this will likely be made the norm. */
- switch (gdbarch_return_value (gdbarch, value_type, NULL, NULL, NULL))
+ switch (gdbarch_return_value (gdbarch, func_type, value_type,
+ NULL, NULL, NULL))
{
case RETURN_VALUE_REGISTER_CONVENTION:
case RETURN_VALUE_ABI_RETURNS_ADDRESS:
case RETURN_VALUE_ABI_PRESERVES_ADDRESS:
value = allocate_value (value_type);
- gdbarch_return_value (gdbarch, value_type, stop_registers,
+ gdbarch_return_value (gdbarch, func_type, value_type, stop_registers,
value_contents_raw (value), NULL);
break;
case RETURN_VALUE_STRUCT_CONVENTION:
if (value)
{
+ struct value_print_options opts;
+
/* Print it. */
stb = ui_out_stream_new (uiout);
old_chain = make_cleanup_ui_out_stream_delete (stb);
ui_out_field_fmt (uiout, "gdb-result-var", "$%d",
record_latest_value (value));
ui_out_text (uiout, " = ");
- value_print (value, stb->stream, 0, Val_no_prettyprint);
+ get_raw_print_options (&opts);
+ value_print (value, stb->stream, &opts);
ui_out_field_stream (uiout, "return-value", stb);
ui_out_text (uiout, "\n");
do_cleanups (old_chain);
soon as it detects that the target has stopped. This function is
called via the cmd_continuation pointer. */
-static void
-finish_command_continuation (struct continuation_arg *arg)
+struct finish_command_continuation_args
{
- struct symbol *function;
struct breakpoint *breakpoint;
- struct cleanup *cleanups;
+ struct symbol *function;
+};
- breakpoint = (struct breakpoint *) arg->data.pointer;
- function = (struct symbol *) arg->next->data.pointer;
- cleanups = (struct cleanup *) arg->next->next->data.pointer;
+static void
+finish_command_continuation (void *arg)
+{
+ struct finish_command_continuation_args *a = arg;
- if (bpstat_find_breakpoint (stop_bpstat, breakpoint) != NULL
- && function != NULL)
+ bpstat bs = NULL;
+
+ if (!ptid_equal (inferior_ptid, null_ptid)
+ && target_has_execution
+ && is_stopped (inferior_ptid))
+ bs = inferior_thread ()->stop_bpstat;
+
+ if (bpstat_find_breakpoint (bs, a->breakpoint) != NULL
+ && a->function != NULL)
{
struct type *value_type;
- value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function));
+ value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (a->function));
if (!value_type)
internal_error (__FILE__, __LINE__,
_("finish_command: function has no target type"));
if (TYPE_CODE (value_type) != TYPE_CODE_VOID)
- print_return_value (value_type);
+ print_return_value (SYMBOL_TYPE (a->function), value_type);
}
- do_exec_cleanups (cleanups);
+ /* We suppress normal call of normal_stop observer and do it here so
+ that that *stopped notification includes the return value. */
+ /* NOTE: This is broken in non-stop mode. There is no guarantee the
+ next stop will be in the same thread that we started doing a
+ finish on. This suppressing (or some other replacement means)
+ should be a thread property. */
+ observer_notify_normal_stop (bs);
+ suppress_stop_observer = 0;
+ delete_breakpoint (a->breakpoint);
+}
+
+static void
+finish_command_continuation_free_arg (void *arg)
+{
+ /* NOTE: See finish_command_continuation. This would go away, if
+ this suppressing is made a thread property. */
+ suppress_stop_observer = 0;
+ xfree (arg);
+}
+
+/* finish_backward -- helper function for finish_command. */
+
+static void
+finish_backward (struct symbol *function)
+{
+ struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+ CORE_ADDR pc;
+ CORE_ADDR func_addr;
+ int back_up;
+
+ pc = get_frame_pc (get_current_frame ());
+
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL) == 0)
+ internal_error (__FILE__, __LINE__,
+ _("Finish: couldn't find function."));
+
+ sal = find_pc_line (func_addr, 0);
+
+ /* We don't need a return value. */
+ tp->proceed_to_finish = 0;
+ /* Special case: if we're sitting at the function entry point,
+ then all we need to do is take a reverse singlestep. We
+ don't need to set a breakpoint, and indeed it would do us
+ no good to do so.
+
+ Note that this can only happen at frame #0, since there's
+ no way that a function up the stack can have a return address
+ that's equal to its entry point. */
+
+ if (sal.pc != pc)
+ {
+ /* Set breakpoint and continue. */
+ breakpoint =
+ set_momentary_breakpoint (sal,
+ get_frame_id (get_selected_frame (NULL)),
+ bp_breakpoint);
+ /* Tell the breakpoint to keep quiet. We won't be done
+ until we've done another reverse single-step. */
+ make_breakpoint_silent (breakpoint);
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ /* We will be stopped when proceed returns. */
+ back_up = bpstat_find_breakpoint (tp->stop_bpstat, breakpoint) != NULL;
+ do_cleanups (old_chain);
+ }
+ else
+ back_up = 1;
+ if (back_up)
+ {
+ /* If in fact we hit the step-resume breakpoint (and not
+ some other breakpoint), then we're almost there --
+ we just need to back up by one more single-step. */
+ tp->step_range_start = tp->step_range_end = 1;
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+ }
+ return;
+}
+
+/* finish_forward -- helper function for finish_command. */
+
+static void
+finish_forward (struct symbol *function, struct frame_info *frame)
+{
+ struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+ struct finish_command_continuation_args *cargs;
+
+ sal = find_pc_line (get_frame_pc (frame), 0);
+ sal.pc = get_frame_pc (frame);
+
+ breakpoint = set_momentary_breakpoint (sal, get_frame_id (frame),
+ bp_finish);
+
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
+
+ tp->proceed_to_finish = 1; /* We want stop_registers, please... */
+ make_cleanup_restore_integer (&suppress_stop_observer);
+ suppress_stop_observer = 1;
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+
+ cargs = xmalloc (sizeof (*cargs));
+
+ cargs->breakpoint = breakpoint;
+ cargs->function = function;
+ add_continuation (tp, finish_command_continuation, cargs,
+ finish_command_continuation_free_arg);
+
+ discard_cleanups (old_chain);
+ if (!target_can_async_p ())
+ do_all_continuations ();
}
/* "finish": Set a temporary breakpoint at the place the selected
static void
finish_command (char *arg, int from_tty)
{
- struct symtab_and_line sal;
struct frame_info *frame;
struct symbol *function;
- struct breakpoint *breakpoint;
- struct cleanup *old_chain;
- struct continuation_arg *arg1, *arg2, *arg3;
int async_exec = 0;
if (async_exec && !target_can_async_p ())
error (_("Asynchronous execution not supported on this target."));
+ /* Don't try to async in reverse. */
+ if (async_exec && execution_direction == EXEC_REVERSE)
+ error (_("Asynchronous 'finish' not supported in reverse."));
+
/* If we are not asked to run in the bg, then prepare to run in the
foreground, synchronously. */
if (!async_exec && target_can_async_p ())
clear_proceed_status ();
- sal = find_pc_line (get_frame_pc (frame), 0);
- sal.pc = get_frame_pc (frame);
-
- breakpoint = set_momentary_breakpoint (sal, get_frame_id (frame), bp_finish);
-
- if (!target_can_async_p ())
- old_chain = make_cleanup_delete_breakpoint (breakpoint);
- else
- old_chain = make_exec_cleanup_delete_breakpoint (breakpoint);
-
/* Find the function we will return from. */
function = find_pc_function (get_frame_pc (get_selected_frame (NULL)));
source. */
if (from_tty)
{
- printf_filtered (_("Run till exit from "));
+ if (execution_direction == EXEC_REVERSE)
+ printf_filtered (_("Run back to call of "));
+ else
+ printf_filtered (_("Run till exit from "));
+
print_stack_frame (get_selected_frame (NULL), 1, LOCATION);
}
- proceed_to_finish = 1; /* We want stop_registers, please... */
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
-
- /* If running asynchronously and the target support asynchronous
- execution, set things up for the rest of the finish command to be
- completed later on, when gdb has detected that the target has
- stopped, in fetch_inferior_event.
- Setup it only after proceed, so that if proceed throws, we don't
- set continuation. */
- if (target_can_async_p ())
- {
- arg1 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg2 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg3 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg1->next = arg2;
- arg2->next = arg3;
- arg3->next = NULL;
- arg1->data.pointer = breakpoint;
- arg2->data.pointer = function;
- arg3->data.pointer = old_chain;
- add_continuation (finish_command_continuation, arg1);
- }
-
- /* Do this only if not running asynchronously or if the target
- cannot do async execution. Otherwise, complete this command when
- the target actually stops, in fetch_inferior_event. */
- if (!target_can_async_p ())
- {
- /* Did we stop at our breakpoint? */
- if (bpstat_find_breakpoint (stop_bpstat, breakpoint) != NULL
- && function != NULL)
- {
- struct type *value_type;
-
- value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function));
- if (!value_type)
- internal_error (__FILE__, __LINE__,
- _("finish_command: function has no target type"));
-
- if (TYPE_CODE (value_type) != TYPE_CODE_VOID)
- print_return_value (value_type);
- }
-
- do_cleanups (old_chain);
- }
+ if (execution_direction == EXEC_REVERSE)
+ finish_backward (function);
+ else
+ finish_forward (function, frame);
}
\f
static void
program_info (char *args, int from_tty)
{
- bpstat bs = stop_bpstat;
- int num;
- int stat = bpstat_num (&bs, &num);
+ bpstat bs;
+ int num, stat;
+ struct thread_info *tp;
+ ptid_t ptid;
if (!target_has_execution)
{
return;
}
+ if (non_stop)
+ ptid = inferior_ptid;
+ else
+ {
+ struct target_waitstatus ws;
+ get_last_target_status (&ptid, &ws);
+ }
+
+ if (ptid_equal (ptid, null_ptid) || is_exited (ptid))
+ error (_("Invalid selected thread."));
+ else if (is_running (ptid))
+ error (_("Selected thread is running."));
+
+ tp = find_thread_pid (ptid);
+ bs = tp->stop_bpstat;
+ stat = bpstat_num (&bs, &num);
+
target_files_info ();
printf_filtered (_("Program stopped at %s.\n"),
hex_string ((unsigned long) stop_pc));
- if (stop_step)
+ if (tp->stop_step)
printf_filtered (_("It stopped after being stepped.\n"));
else if (stat != 0)
{
stat = bpstat_num (&bs, &num);
}
}
- else if (stop_signal != TARGET_SIGNAL_0)
+ else if (tp->stop_signal != TARGET_SIGNAL_0)
{
printf_filtered (_("It stopped with signal %s, %s.\n"),
- target_signal_to_name (stop_signal),
- target_signal_to_string (stop_signal));
+ target_signal_to_name (tp->stop_signal),
+ target_signal_to_string (tp->stop_signal));
}
if (!from_tty)
|| TYPE_CODE (register_type (gdbarch, i)) == TYPE_CODE_DECFLOAT)
{
int j;
+ struct value_print_options opts;
+ get_user_print_options (&opts);
+ opts.deref_ref = 1;
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 0, 1, 0, Val_pretty_default);
+ file, 0, &opts, current_language);
fprintf_filtered (file, "\t(raw 0x");
for (j = 0; j < register_size (gdbarch, i); j++)
}
else
{
+ struct value_print_options opts;
+
/* Print the register in hex. */
+ get_formatted_print_options (&opts, 'x');
+ opts.deref_ref = 1;
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 'x', 1, 0, Val_pretty_default);
+ file, 0, &opts,
+ current_language);
/* If not a vector register, print it also according to its
natural format. */
if (TYPE_VECTOR (register_type (gdbarch, i)) == 0)
{
+ get_user_print_options (&opts);
+ opts.deref_ref = 1;
fprintf_filtered (file, "\t");
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 0, 1, 0, Val_pretty_default);
+ file, 0, &opts, current_language);
}
}
/* A register name? */
{
- int regnum = frame_map_name_to_regnum (frame, start, end - start);
+ int regnum = user_reg_map_name_to_regnum (gdbarch, start, end - start);
if (regnum >= 0)
{
/* User registers lie completely outside of the range of
if (regnum >= gdbarch_num_regs (gdbarch)
+ gdbarch_num_pseudo_regs (gdbarch))
{
+ struct value_print_options opts;
struct value *val = value_of_user_reg (regnum, frame);
printf_filtered ("%s: ", start);
+ get_formatted_print_options (&opts, 'x');
print_scalar_formatted (value_contents (val),
check_typedef (value_type (val)),
- 'x', 0, gdb_stdout);
+ &opts, 0, gdb_stdout);
printf_filtered ("\n");
}
else
}
\f
+/* Used in `attach&' command. ARG is a point to an integer
+ representing a process id. Proceed threads of this process iff
+ they stopped due to debugger request, and when they did, they
+ reported a clean stop (TARGET_SIGNAL_0). Do not proceed threads
+ that have been explicitly been told to stop. */
+
+static int
+proceed_after_attach_callback (struct thread_info *thread,
+ void *arg)
+{
+ int pid = * (int *) arg;
+
+ if (ptid_get_pid (thread->ptid) == pid
+ && !is_exited (thread->ptid)
+ && !is_executing (thread->ptid)
+ && !thread->stop_requested
+ && thread->stop_signal == TARGET_SIGNAL_0)
+ {
+ switch_to_thread (thread->ptid);
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+
+ return 0;
+}
+
+static void
+proceed_after_attach (int pid)
+{
+ /* Don't error out if the current thread is running, because
+ there may be other stopped threads. */
+ struct cleanup *old_chain;
+
+ /* Backup current thread and selected frame. */
+ old_chain = make_cleanup_restore_current_thread ();
+
+ iterate_over_threads (proceed_after_attach_callback, &pid);
+
+ /* Restore selected ptid. */
+ do_cleanups (old_chain);
+}
+
/*
* TODO:
* Should save/restore the tty state since it might be that the
This stops it cold in its tracks and allows us to start debugging it.
and wait for the trace-trap that results from attaching. */
-void
-attach_command (char *args, int from_tty)
+static void
+attach_command_post_wait (char *args, int from_tty, int async_exec)
{
char *exec_file;
char *full_exec_path = NULL;
+ struct inferior *inferior;
- dont_repeat (); /* Not for the faint of heart */
-
- if (target_has_execution)
- {
- if (query ("A program is being debugged already. Kill it? "))
- target_kill ();
- else
- error (_("Not killed."));
- }
-
- /* Clean up any leftovers from other runs. Some other things from
- this function should probably be moved into target_pre_inferior. */
- target_pre_inferior (from_tty);
-
- /* Clear out solib state. Otherwise the solib state of the previous
- inferior might have survived and is entirely wrong for the new
- target. This has been observed on GNU/Linux using glibc 2.3. How
- to reproduce:
-
- bash$ ./foo&
- [1] 4711
- bash$ ./foo&
- [1] 4712
- bash$ gdb ./foo
- [...]
- (gdb) attach 4711
- (gdb) detach
- (gdb) attach 4712
- Cannot access memory at address 0xdeadbeef
- */
- clear_solib ();
-
- target_attach (args, from_tty);
+ inferior = current_inferior ();
+ inferior->stop_soon = NO_STOP_QUIETLY;
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Set up execution context to know that we should return from
- wait_for_inferior as soon as the target reports a stop. */
- init_wait_for_inferior ();
- clear_proceed_status ();
-
- /* No traps are generated when attaching to inferior under Mach 3
- or GNU hurd. */
-#ifndef ATTACH_NO_WAIT
- /* Careful here. See comments in inferior.h. Basically some OSes
- don't ignore SIGSTOPs on continue requests anymore. We need a
- way for handle_inferior_event to reset the stop_signal variable
- after an attach, and this is what STOP_QUIETLY_NO_SIGSTOP is for. */
- stop_soon = STOP_QUIETLY_NO_SIGSTOP;
- wait_for_inferior (0);
- stop_soon = NO_STOP_QUIETLY;
-#endif
-
- /*
- * If no exec file is yet known, try to determine it from the
- * process itself.
- */
+ /* If no exec file is yet known, try to determine it from the
+ process itself. */
exec_file = (char *) get_exec_file (0);
if (!exec_file)
{
reread_symbols ();
}
- /* Take any necessary post-attaching actions for this platform.
- */
+ /* Take any necessary post-attaching actions for this platform. */
target_post_attach (PIDGET (inferior_ptid));
post_create_inferior (¤t_target, from_tty);
/* Install inferior's terminal modes. */
target_terminal_inferior ();
- normal_stop ();
+ if (async_exec)
+ {
+ /* The user requested an `attach&', so be sure to leave threads
+ that didn't get a signal running. */
+
+ /* Immediatelly resume all suspended threads of this inferior,
+ and this inferior only. This should have no effect on
+ already running threads. If a thread has been stopped with a
+ signal, leave it be. */
+ if (non_stop)
+ proceed_after_attach (inferior->pid);
+ else
+ {
+ if (inferior_thread ()->stop_signal == TARGET_SIGNAL_0)
+ {
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+ }
+ }
+ else
+ {
+ /* The user requested a plain `attach', so be sure to leave
+ the inferior stopped. */
- if (deprecated_attach_hook)
- deprecated_attach_hook ();
+ if (target_can_async_p ())
+ async_enable_stdin ();
+
+ /* At least the current thread is already stopped. */
+
+ /* In all-stop, by definition, all threads have to be already
+ stopped at this point. In non-stop, however, although the
+ selected thread is stopped, others may still be executing.
+ Be sure to explicitly stop all threads of the process. This
+ should have no effect on already stopped threads. */
+ if (non_stop)
+ target_stop (pid_to_ptid (inferior->pid));
+
+ /* Tell the user/frontend where we're stopped. */
+ normal_stop ();
+ if (deprecated_attach_hook)
+ deprecated_attach_hook ();
+ }
+}
+
+struct attach_command_continuation_args
+{
+ char *args;
+ int from_tty;
+ int async_exec;
+};
+
+static void
+attach_command_continuation (void *args)
+{
+ struct attach_command_continuation_args *a = args;
+ attach_command_post_wait (a->args, a->from_tty, a->async_exec);
+}
+
+static void
+attach_command_continuation_free_args (void *args)
+{
+ struct attach_command_continuation_args *a = args;
+ xfree (a->args);
+ xfree (a);
+}
+
+void
+attach_command (char *args, int from_tty)
+{
+ char *exec_file;
+ char *full_exec_path = NULL;
+ int async_exec = 0;
+ struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
+
+ dont_repeat (); /* Not for the faint of heart */
+
+ if (target_supports_multi_process ())
+ /* Don't complain if we can be attached to multiple processes. */
+ ;
+ else if (target_has_execution)
+ {
+ if (query ("A program is being debugged already. Kill it? "))
+ target_kill ();
+ else
+ error (_("Not killed."));
+ }
+
+ /* Clean up any leftovers from other runs. Some other things from
+ this function should probably be moved into target_pre_inferior. */
+ target_pre_inferior (from_tty);
+
+ if (non_stop && !target_supports_non_stop ())
+ error (_("Cannot attach to this target in non-stop mode"));
+
+ if (args)
+ {
+ async_exec = strip_bg_char (&args);
+
+ /* If we get a request for running in the bg but the target
+ doesn't support it, error out. */
+ if (async_exec && !target_can_async_p ())
+ error (_("Asynchronous execution not supported on this target."));
+ }
+
+ /* If we don't get a request of running in the bg, then we need
+ to simulate synchronous (fg) execution. */
+ if (!async_exec && target_can_async_p ())
+ {
+ /* Simulate synchronous execution */
+ async_disable_stdin ();
+ make_cleanup ((make_cleanup_ftype *)async_enable_stdin, NULL);
+ }
+
+ target_attach (args, from_tty);
+
+ /* Set up the "saved terminal modes" of the inferior
+ based on what modes we are starting it with. */
+ target_terminal_init ();
+
+ /* Set up execution context to know that we should return from
+ wait_for_inferior as soon as the target reports a stop. */
+ init_wait_for_inferior ();
+ clear_proceed_status ();
+
+ if (non_stop)
+ {
+ /* If we find that the current thread isn't stopped, explicitly
+ do so now, because we're going to install breakpoints and
+ poke at memory. */
+
+ if (async_exec)
+ /* The user requested an `attach&'; stop just one thread. */
+ target_stop (inferior_ptid);
+ else
+ /* The user requested an `attach', so stop all threads of this
+ inferior. */
+ target_stop (pid_to_ptid (ptid_get_pid (inferior_ptid)));
+ }
+
+ /* Some system don't generate traps when attaching to inferior.
+ E.g. Mach 3 or GNU hurd. */
+ if (!target_attach_no_wait)
+ {
+ struct inferior *inferior = current_inferior ();
+
+ /* Careful here. See comments in inferior.h. Basically some
+ OSes don't ignore SIGSTOPs on continue requests anymore. We
+ need a way for handle_inferior_event to reset the stop_signal
+ variable after an attach, and this is what
+ STOP_QUIETLY_NO_SIGSTOP is for. */
+ inferior->stop_soon = STOP_QUIETLY_NO_SIGSTOP;
+
+ if (target_can_async_p ())
+ {
+ /* sync_execution mode. Wait for stop. */
+ struct attach_command_continuation_args *a;
+
+ a = xmalloc (sizeof (*a));
+ a->args = xstrdup (args);
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+ discard_cleanups (back_to);
+ return;
+ }
+
+ wait_for_inferior (0);
+ }
+
+ attach_command_post_wait (args, from_tty, async_exec);
+ discard_cleanups (back_to);
}
/*
* started via the normal ptrace (PTRACE_TRACEME).
*/
-static void
+void
detach_command (char *args, int from_tty)
{
dont_repeat (); /* Not for the faint of heart. */
target_detach (args, from_tty);
- no_shared_libraries (NULL, from_tty);
+
+ /* If the solist is global across inferiors, don't clear it when we
+ detach from a single inferior. */
+ if (!gdbarch_has_global_solist (target_gdbarch))
+ no_shared_libraries (NULL, from_tty);
+
+ /* If the current target interface claims there's still execution,
+ then don't mess with threads of other processes. */
+ if (!target_has_execution)
+ init_thread_list ();
+
if (deprecated_detach_hook)
deprecated_detach_hook ();
}
dont_repeat (); /* Not for the faint of heart */
target_disconnect (args, from_tty);
no_shared_libraries (NULL, from_tty);
+ init_thread_list ();
if (deprecated_detach_hook)
deprecated_detach_hook ();
}
+void
+interrupt_target_1 (int all_threads)
+{
+ ptid_t ptid;
+ if (all_threads)
+ ptid = minus_one_ptid;
+ else
+ ptid = inferior_ptid;
+ target_stop (ptid);
+
+ /* Tag the thread as having been explicitly requested to stop, so
+ other parts of gdb know not to resume this thread automatically,
+ if it was stopped due to an internal event. Limit this to
+ non-stop mode, as when debugging a multi-threaded application in
+ all-stop mode, we will only get one stop event --- it's undefined
+ which thread will report the event. */
+ if (non_stop)
+ set_stop_requested (ptid, 1);
+}
+
/* Stop the execution of the target while running in async mode, in
- the backgound. */
+ the backgound. In all-stop, stop the whole process. In non-stop
+ mode, stop the current thread only by default, or stop all threads
+ if the `-a' switch is used. */
+
+/* interrupt [-a] */
void
interrupt_target_command (char *args, int from_tty)
{
if (target_can_async_p ())
{
+ int all_threads = 0;
+
dont_repeat (); /* Not for the faint of heart */
- target_stop ();
+
+ if (args != NULL
+ && strncmp (args, "-a", sizeof ("-a") - 1) == 0)
+ all_threads = 1;
+
+ if (!non_stop && all_threads)
+ error (_("-a is meaningless in all-stop mode."));
+
+ interrupt_target_1 (all_threads);
}
}
add_com ("finish", class_run, finish_command, _("\
Execute until selected stack frame returns.\n\
Upon return, the value returned is printed and put in the value history."));
+ add_com_alias ("fin", "finish", class_run, 1);
add_com ("next", class_run, next_command, _("\
Step program, proceeding through subroutine calls.\n\
if (xdb_commands)
add_com_alias ("g", "go", class_run, 1);
- add_com ("continue", class_run, continue_command, _("\
+ c = add_com ("continue", class_run, continue_command, _("\
Continue program being debugged, after signal or breakpoint.\n\
If proceeding from breakpoint, a number N may be used as an argument,\n\
which means to set the ignore count of that breakpoint to N - 1 (so that\n\
-the breakpoint won't break until the Nth time it is reached)."));
+the breakpoint won't break until the Nth time it is reached).\n\
+\n\
+If non-stop mode is enabled, continue only the current thread,\n\
+otherwise all the threads in the program are continued. To \n\
+continue all stopped threads in non-stop mode, use the -a option.\n\
+Specifying -a and an ignore count simultaneously is an error."));
add_com_alias ("c", "cont", class_run, 1);
add_com_alias ("fg", "cont", class_run, 1);
\"run\" command."));
set_cmd_completer (c, filename_completer);
- add_com ("interrupt", class_run, interrupt_target_command,
- _("Interrupt the execution of the debugged program."));
+ c = add_com ("interrupt", class_run, interrupt_target_command,
+ _("Interrupt the execution of the debugged program.\n\
+If non-stop mode is enabled, interrupt only the current thread,\n\
+otherwise all the threads in the program are stopped. To \n\
+interrupt all running threads in non-stop mode, use the -a option."));
add_info ("registers", nofp_registers_info, _("\
List of integer registers and their contents, for selected stack frame.\n\