/* Memory-access and commands for "inferior" process, for GDB.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2018 Free Software Foundation, Inc.
This file is part of GDB.
#include "block.h"
#include "solib.h"
#include <ctype.h>
-#include "observer.h"
+#include "observable.h"
#include "target-descriptions.h"
#include "user-regs.h"
#include "cli/cli-decode.h"
#include "linespec.h"
#include "cli/cli-utils.h"
#include "infcall.h"
+#include "thread-fsm.h"
+#include "top.h"
+#include "interps.h"
+#include "common/gdb_optional.h"
+#include "source.h"
/* Local functions: */
-static void nofp_registers_info (char *, int);
-
static void until_next_command (int);
-static void until_command (char *, int);
-
-static void path_info (char *, int);
-
-static void path_command (char *, int);
-
-static void unset_command (char *, int);
-
-static void float_info (char *, int);
-
-static void disconnect_command (char *, int);
-
-static void unset_environment_command (char *, int);
-
-static void set_environment_command (char *, int);
-
-static void environment_info (char *, int);
-
-static void program_info (char *, int);
-
-static void finish_command (char *, int);
-
-static void signal_command (char *, int);
-
-static void jump_command (char *, int);
-
-static void step_1 (int, int, char *);
-static void step_once (int skip_subroutines, int single_inst,
- int count, int thread);
-
-static void next_command (char *, int);
-
-static void step_command (char *, int);
-
-static void run_command (char *, int);
-
-void _initialize_infcmd (void);
+static void step_1 (int, int, const char *);
#define ERROR_NO_INFERIOR \
if (!target_has_execution) error (_("The program is not being run."));
static char *inferior_args_scratch;
+/* Scratch area where the new cwd will be stored by 'set cwd'. */
+
+static char *inferior_cwd_scratch;
+
/* Scratch area where 'set inferior-tty' will store user-provided value.
We'll immediate copy it into per-inferior storage. */
set_inferior_io_terminal (const char *terminal_name)
{
xfree (current_inferior ()->terminal);
- current_inferior ()->terminal = terminal_name ? xstrdup (terminal_name) : 0;
+
+ if (terminal_name != NULL && *terminal_name != '\0')
+ current_inferior ()->terminal = xstrdup (terminal_name);
+ else
+ current_inferior ()->terminal = NULL;
}
const char *
}
static void
-set_inferior_tty_command (char *args, int from_tty,
+set_inferior_tty_command (const char *args, int from_tty,
struct cmd_list_element *c)
{
/* CLI has assigned the user-provided value to inferior_io_terminal_scratch.
NEWARGS is not transferred. */
void
-set_inferior_args (char *newargs)
+set_inferior_args (const char *newargs)
{
xfree (current_inferior ()->args);
current_inferior ()->args = newargs ? xstrdup (newargs) : NULL;
/* Notice when `set args' is run. */
static void
-set_args_command (char *args, int from_tty, struct cmd_list_element *c)
+set_args_command (const char *args, int from_tty, struct cmd_list_element *c)
{
/* CLI has assigned the user-provided value to inferior_args_scratch.
Now route it to current inferior. */
deprecated_show_value_hack (file, from_tty, c, get_inferior_args ());
}
+/* See common/common-inferior.h. */
+
+void
+set_inferior_cwd (const char *cwd)
+{
+ struct inferior *inf = current_inferior ();
+
+ gdb_assert (inf != NULL);
+
+ if (cwd == NULL)
+ inf->cwd.reset ();
+ else
+ inf->cwd.reset (xstrdup (cwd));
+}
+
+/* See common/common-inferior.h. */
+
+const char *
+get_inferior_cwd ()
+{
+ return current_inferior ()->cwd.get ();
+}
+
+/* Handle the 'set cwd' command. */
+
+static void
+set_cwd_command (const char *args, int from_tty, struct cmd_list_element *c)
+{
+ if (*inferior_cwd_scratch == '\0')
+ set_inferior_cwd (NULL);
+ else
+ set_inferior_cwd (inferior_cwd_scratch);
+}
+
+/* Handle the 'show cwd' command. */
+
+static void
+show_cwd_command (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ const char *cwd = get_inferior_cwd ();
+
+ if (cwd == NULL)
+ fprintf_filtered (gdb_stdout,
+ _("\
+You have not set the inferior's current working directory.\n\
+The inferior will inherit GDB's cwd if native debugging, or the remote\n\
+server's cwd if remote debugging.\n"));
+ else
+ fprintf_filtered (gdb_stdout,
+ _("Current working directory that will be used "
+ "when starting the inferior is \"%s\".\n"), cwd);
+}
+
\f
/* Compute command-line string given argument vector. This does the
same shell processing as fork_inferior. */
#ifdef __MINGW32__
/* This holds all the characters considered special to the
Windows shells. */
- char *special = "\"!&*|[]{}<>?`~^=;, \t\n";
- const char quote = '"';
+ static const char special[] = "\"!&*|[]{}<>?`~^=;, \t\n";
+ static const char quote = '"';
#else
/* This holds all the characters considered special to the
typical Unix shells. We include `^' because the SunOS
/bin/sh treats it as a synonym for `|'. */
- char *special = "\"!#$&*()\\|[]{}<>?'`~^; \t\n";
- const char quote = '\'';
+ static const char special[] = "\"!#$&*()\\|[]{}<>?'`~^; \t\n";
+ static const char quote = '\'';
#endif
int i;
int length = 0;
NULL is returned. *BG_CHAR_P is an output boolean that indicates
whether the '&' character was found. */
-static char *
+static gdb::unique_xmalloc_ptr<char>
strip_bg_char (const char *args, int *bg_char_p)
{
const char *p;
*bg_char_p = 1;
if (p != args)
- return savestring (args, p - args);
+ return gdb::unique_xmalloc_ptr<char>
+ (savestring (args, p - args));
else
- return NULL;
+ return gdb::unique_xmalloc_ptr<char> (nullptr);
}
*bg_char_p = 0;
- return xstrdup (args);
+ return gdb::unique_xmalloc_ptr<char> (xstrdup (args));
}
/* Common actions to take after creating any sort of inferior, by any
{
/* Be sure we own the terminal in case write operations are performed. */
- target_terminal_ours ();
+ target_terminal::ours_for_output ();
/* If the target hasn't taken care of this already, do it now.
Targets which need to access registers during to_open,
/* If the solist is global across processes, there's no need to
refetch it here. */
if (!gdbarch_has_global_solist (target_gdbarch ()))
- solib_add (NULL, 0, target, auto_solib_add);
+ solib_add (NULL, 0, auto_solib_add);
}
}
if the now pushed target supports hardware watchpoints. */
breakpoint_re_set ();
- observer_notify_inferior_created (target, from_tty);
+ gdb::observers::inferior_created.notify (target, from_tty);
}
/* Kill the inferior if already running. This function is designed
if (background && !target->to_can_async_p (target))
error (_("Asynchronous execution not supported on this target."));
- /* If we don't get a request of running in the bg, then we need
- to simulate synchronous (fg) execution. */
- if (!background && target->to_can_async_p (target))
+ if (!background)
{
- /* Simulate synchronous execution. Note no cleanup is necessary
- for this. stdin is re-enabled whenever an error reaches the
- top level. */
- async_disable_stdin ();
+ /* If we get a request for running in the fg, then we need to
+ simulate synchronous (fg) execution. Note no cleanup is
+ necessary for this. stdin is re-enabled whenever an error
+ reaches the top level. */
+ all_uis_on_sync_execution_starting ();
}
}
-/* Implement the "run" command. If TBREAK_AT_MAIN is set, then insert
- a temporary breakpoint at the begining of the main program before
- running the program. */
+/* Determine how the new inferior will behave. */
+
+enum run_how
+ {
+ /* Run program without any explicit stop during startup. */
+ RUN_NORMAL,
+
+ /* Stop at the beginning of the program's main function. */
+ RUN_STOP_AT_MAIN,
+
+ /* Stop at the first instruction of the program. */
+ RUN_STOP_AT_FIRST_INSN
+ };
+
+/* Implement the "run" command. Force a stop during program start if
+ requested by RUN_HOW. */
static void
-run_command_1 (char *args, int from_tty, int tbreak_at_main)
+run_command_1 (const char *args, int from_tty, enum run_how run_how)
{
- char *exec_file;
+ const char *exec_file;
struct cleanup *old_chain;
ptid_t ptid;
struct ui_out *uiout = current_uiout;
struct target_ops *run_target;
int async_exec;
- struct cleanup *args_chain;
dont_repeat ();
reopen_exec_file ();
reread_symbols ();
- args = strip_bg_char (args, &async_exec);
- args_chain = make_cleanup (xfree, args);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (args, &async_exec);
+ args = stripped.get ();
/* Do validation and preparation before possibly changing anything
in the inferior. */
/* Done. Can now set breakpoints, change inferior args, etc. */
- /* Insert the temporary breakpoint if a location was specified. */
- if (tbreak_at_main)
+ /* Insert temporary breakpoint in main function if requested. */
+ if (run_how == RUN_STOP_AT_MAIN)
tbreak_command (main_name (), 0);
- exec_file = (char *) get_exec_file (0);
+ exec_file = get_exec_file (0);
/* We keep symbols from add-symbol-file, on the grounds that the
user might want to add some symbols before running the program
if (from_tty)
{
- ui_out_field_string (uiout, NULL, "Starting program");
- ui_out_text (uiout, ": ");
+ uiout->field_string (NULL, "Starting program");
+ uiout->text (": ");
if (exec_file)
- ui_out_field_string (uiout, "execfile", exec_file);
- ui_out_spaces (uiout, 1);
+ uiout->field_string ("execfile", exec_file);
+ uiout->spaces (1);
/* We call get_inferior_args() because we might need to compute
the value now. */
- ui_out_field_string (uiout, "infargs", get_inferior_args ());
- ui_out_text (uiout, "\n");
- ui_out_flush (uiout);
+ uiout->field_string ("infargs", get_inferior_args ());
+ uiout->text ("\n");
+ uiout->flush ();
}
- /* Done with ARGS. */
- do_cleanups (args_chain);
-
/* We call get_inferior_args() because we might need to compute
the value now. */
- run_target->to_create_inferior (run_target, exec_file, get_inferior_args (),
- environ_vector (current_inferior ()->environment),
+ run_target->to_create_inferior (run_target, exec_file,
+ std::string (get_inferior_args ()),
+ current_inferior ()->environment.envp (),
from_tty);
/* to_create_inferior should push the target, so after this point we
shouldn't refer to run_target again. */
has done its thing; now we are setting up the running program. */
post_create_inferior (¤t_target, 0);
+ /* Queue a pending event so that the program stops immediately. */
+ if (run_how == RUN_STOP_AT_FIRST_INSN)
+ {
+ thread_info *thr = inferior_thread ();
+ thr->suspend.waitstatus_pending_p = 1;
+ thr->suspend.waitstatus.kind = TARGET_WAITKIND_STOPPED;
+ thr->suspend.waitstatus.value.sig = GDB_SIGNAL_0;
+ }
+
/* Start the target running. Do not use -1 continuation as it would skip
breakpoint right at the entry point. */
proceed (regcache_read_pc (get_current_regcache ()), GDB_SIGNAL_0);
}
static void
-run_command (char *args, int from_tty)
+run_command (const char *args, int from_tty)
{
- run_command_1 (args, from_tty, 0);
+ run_command_1 (args, from_tty, RUN_NORMAL);
}
/* Start the execution of the program up until the beginning of the main
program. */
static void
-start_command (char *args, int from_tty)
+start_command (const char *args, int from_tty)
{
/* Some languages such as Ada need to search inside the program
minimal symbols for the location where to put the temporary
error (_("No symbol table loaded. Use the \"file\" command."));
/* Run the program until reaching the main procedure... */
- run_command_1 (args, from_tty, 1);
+ run_command_1 (args, from_tty, RUN_STOP_AT_MAIN);
+}
+
+/* Start the execution of the program stopping at the first
+ instruction. */
+
+static void
+starti_command (const char *args, int from_tty)
+{
+ run_command_1 (args, from_tty, RUN_STOP_AT_FIRST_INSN);
}
static int
{
/* Don't error out if the current thread is running, because
there may be other stopped threads. */
- struct cleanup *old_chain;
- /* Backup current thread and selected frame. */
- old_chain = make_cleanup_restore_current_thread ();
+ /* Backup current thread and selected frame and restore on scope
+ exit. */
+ scoped_restore_current_thread restore_thread;
iterate_over_threads (proceed_thread_callback, NULL);
- if (sync_execution)
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
{
/* If all threads in the target were already running,
proceed_thread_callback ends up never calling proceed,
Continuing.
<no thread was resumed, but the inferior now owns the terminal>
*/
- target_terminal_inferior ();
+ target_terminal::inferior ();
}
-
- /* Restore selected ptid. */
- do_cleanups (old_chain);
}
else
{
/* continue [-a] [proceed-count] [&] */
static void
-continue_command (char *args, int from_tty)
+continue_command (const char *args, int from_tty)
{
int async_exec;
int all_threads = 0;
- struct cleanup *args_chain;
ERROR_NO_INFERIOR;
/* Find out whether we must run in the background. */
- args = strip_bg_char (args, &async_exec);
- args_chain = make_cleanup (xfree, args);
-
- prepare_execution_command (¤t_target, async_exec);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (args, &async_exec);
+ args = stripped.get ();
if (args != NULL)
{
}
}
- /* Done with ARGS. */
- do_cleanups (args_chain);
+ ERROR_NO_INFERIOR;
+ ensure_not_tfind_mode ();
+
+ if (!non_stop || !all_threads)
+ {
+ ensure_valid_thread ();
+ ensure_not_running ();
+ }
+
+ prepare_execution_command (¤t_target, async_exec);
if (from_tty)
printf_filtered (_("Continuing.\n"));
static void
set_step_frame (void)
{
- struct symtab_and_line sal;
- CORE_ADDR pc;
- struct frame_info *frame = get_current_frame ();
- struct thread_info *tp = inferior_thread ();
+ frame_info *frame = get_current_frame ();
- find_frame_sal (frame, &sal);
+ symtab_and_line sal = find_frame_sal (frame);
set_step_info (frame, sal);
- pc = get_frame_pc (frame);
+
+ CORE_ADDR pc = get_frame_pc (frame);
+ thread_info *tp = inferior_thread ();
tp->control.step_start_function = find_pc_function (pc);
}
/* Step until outside of current statement. */
static void
-step_command (char *count_string, int from_tty)
+step_command (const char *count_string, int from_tty)
{
step_1 (0, 0, count_string);
}
/* Likewise, but skip over subroutine calls as if single instructions. */
static void
-next_command (char *count_string, int from_tty)
+next_command (const char *count_string, int from_tty)
{
step_1 (1, 0, count_string);
}
/* Likewise, but step only one instruction. */
static void
-stepi_command (char *count_string, int from_tty)
+stepi_command (const char *count_string, int from_tty)
{
step_1 (0, 1, count_string);
}
static void
-nexti_command (char *count_string, int from_tty)
+nexti_command (const char *count_string, int from_tty)
{
step_1 (1, 1, count_string);
}
delete_longjmp_breakpoint (thread);
}
+/* Data for the FSM that manages the step/next/stepi/nexti
+ commands. */
+
+struct step_command_fsm
+{
+ /* The base class. */
+ struct thread_fsm thread_fsm;
+
+ /* How many steps left in a "step N"-like command. */
+ int count;
+
+ /* If true, this is a next/nexti, otherwise a step/stepi. */
+ int skip_subroutines;
+
+ /* If true, this is a stepi/nexti, otherwise a step/step. */
+ int single_inst;
+};
+
+static void step_command_fsm_clean_up (struct thread_fsm *self,
+ struct thread_info *thread);
+static int step_command_fsm_should_stop (struct thread_fsm *self,
+ struct thread_info *thread);
+static enum async_reply_reason
+ step_command_fsm_async_reply_reason (struct thread_fsm *self);
+
+/* step_command_fsm's vtable. */
+
+static struct thread_fsm_ops step_command_fsm_ops =
+{
+ NULL,
+ step_command_fsm_clean_up,
+ step_command_fsm_should_stop,
+ NULL, /* return_value */
+ step_command_fsm_async_reply_reason,
+};
+
+/* Allocate a new step_command_fsm. */
+
+static struct step_command_fsm *
+new_step_command_fsm (struct interp *cmd_interp)
+{
+ struct step_command_fsm *sm;
+
+ sm = XCNEW (struct step_command_fsm);
+ thread_fsm_ctor (&sm->thread_fsm, &step_command_fsm_ops, cmd_interp);
+
+ return sm;
+}
+
+/* Prepare for a step/next/etc. command. Any target resource
+ allocated here is undone in the FSM's clean_up method. */
+
+static void
+step_command_fsm_prepare (struct step_command_fsm *sm,
+ int skip_subroutines, int single_inst,
+ int count, struct thread_info *thread)
+{
+ sm->skip_subroutines = skip_subroutines;
+ sm->single_inst = single_inst;
+ sm->count = count;
+
+ /* Leave the si command alone. */
+ if (!sm->single_inst || sm->skip_subroutines)
+ set_longjmp_breakpoint (thread, get_frame_id (get_current_frame ()));
+
+ thread->control.stepping_command = 1;
+}
+
+static int prepare_one_step (struct step_command_fsm *sm);
+
static void
-step_1 (int skip_subroutines, int single_inst, char *count_string)
+step_1 (int skip_subroutines, int single_inst, const char *count_string)
{
- int count = 1;
- struct cleanup *cleanups = make_cleanup (null_cleanup, NULL);
+ int count;
int async_exec;
- int thread = -1;
- struct cleanup *args_chain;
+ struct thread_info *thr;
+ struct step_command_fsm *step_sm;
ERROR_NO_INFERIOR;
ensure_not_tfind_mode ();
ensure_valid_thread ();
ensure_not_running ();
- count_string = strip_bg_char (count_string, &async_exec);
- args_chain = make_cleanup (xfree, count_string);
+ gdb::unique_xmalloc_ptr<char> stripped
+ = strip_bg_char (count_string, &async_exec);
+ count_string = stripped.get ();
prepare_execution_command (¤t_target, async_exec);
count = count_string ? parse_and_eval_long (count_string) : 1;
- /* Done with ARGS. */
- do_cleanups (args_chain);
+ clear_proceed_status (1);
- if (!single_inst || skip_subroutines) /* Leave si command alone. */
- {
- struct thread_info *tp = inferior_thread ();
+ /* Setup the execution command state machine to handle all the COUNT
+ steps. */
+ thr = inferior_thread ();
+ step_sm = new_step_command_fsm (command_interp ());
+ thr->thread_fsm = &step_sm->thread_fsm;
- if (in_thread_list (inferior_ptid))
- thread = pid_to_thread_id (inferior_ptid);
+ step_command_fsm_prepare (step_sm, skip_subroutines,
+ single_inst, count, thr);
- set_longjmp_breakpoint (tp, get_frame_id (get_current_frame ()));
+ /* Do only one step for now, before returning control to the event
+ loop. Let the continuation figure out how many other steps we
+ need to do, and handle them one at the time, through
+ step_once. */
+ if (!prepare_one_step (step_sm))
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
+ else
+ {
+ int proceeded;
- make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
+ /* Stepped into an inline frame. Pretend that we've
+ stopped. */
+ thread_fsm_clean_up (thr->thread_fsm, thr);
+ proceeded = normal_stop ();
+ if (!proceeded)
+ inferior_event_handler (INF_EXEC_COMPLETE, NULL);
+ all_uis_check_sync_execution_done ();
}
+}
- /* In synchronous case, all is well; each step_once call will step once. */
- if (!target_can_async_p ())
- {
- for (; count > 0; count--)
- {
- step_once (skip_subroutines, single_inst, count, thread);
-
- if (!target_has_execution)
- break;
- else
- {
- struct thread_info *tp = inferior_thread ();
+/* Implementation of the 'should_stop' FSM method for stepping
+ commands. Called after we are done with one step operation, to
+ check whether we need to step again, before we print the prompt and
+ return control to the user. If count is > 1, returns false, as we
+ will need to keep going. */
- if (!tp->control.stop_step || !tp->step_multi)
- {
- /* If we stopped for some reason that is not stepping
- there are no further steps to make. */
- tp->step_multi = 0;
- break;
- }
- }
- }
+static int
+step_command_fsm_should_stop (struct thread_fsm *self, struct thread_info *tp)
+{
+ struct step_command_fsm *sm = (struct step_command_fsm *) self;
- do_cleanups (cleanups);
- }
- else
+ if (tp->control.stop_step)
{
- /* In the case of an asynchronous target things get complicated;
- do only one step for now, before returning control to the
- event loop. Let the continuation figure out how many other
- steps we need to do, and handle them one at the time, through
- step_once. */
- step_once (skip_subroutines, single_inst, count, thread);
+ /* There are more steps to make, and we did stop due to
+ ending a stepping range. Do another step. */
+ if (--sm->count > 0)
+ return prepare_one_step (sm);
- /* We are running, and the continuation is installed. It will
- disable the longjmp breakpoint as appropriate. */
- discard_cleanups (cleanups);
+ thread_fsm_set_finished (self);
}
-}
-struct step_1_continuation_args
-{
- int count;
- int skip_subroutines;
- int single_inst;
- int thread;
-};
+ return 1;
+}
-/* Called after we are done with one step operation, to check whether
- we need to step again, before we print the prompt and return control
- to the user. If count is > 1, we will need to do one more call to
- proceed(), via step_once(). Basically it is like step_once and
- step_1_continuation are co-recursive. */
+/* Implementation of the 'clean_up' FSM method for stepping commands. */
static void
-step_1_continuation (void *args, int err)
+step_command_fsm_clean_up (struct thread_fsm *self, struct thread_info *thread)
{
- struct step_1_continuation_args *a = args;
+ struct step_command_fsm *sm = (struct step_command_fsm *) self;
- if (target_has_execution)
- {
- struct thread_info *tp;
+ if (!sm->single_inst || sm->skip_subroutines)
+ delete_longjmp_breakpoint (thread->global_num);
+}
- tp = inferior_thread ();
- if (!err
- && tp->step_multi && tp->control.stop_step)
- {
- /* There are more steps to make, and we did stop due to
- ending a stepping range. Do another step. */
- step_once (a->skip_subroutines, a->single_inst,
- a->count - 1, a->thread);
- return;
- }
- tp->step_multi = 0;
- }
+/* Implementation of the 'async_reply_reason' FSM method for stepping
+ commands. */
- /* We either hit an error, or stopped for some reason that is
- not stepping, or there are no further steps to make.
- Cleanup. */
- if (!a->single_inst || a->skip_subroutines)
- delete_longjmp_breakpoint (a->thread);
+static enum async_reply_reason
+step_command_fsm_async_reply_reason (struct thread_fsm *self)
+{
+ return EXEC_ASYNC_END_STEPPING_RANGE;
}
-/* Do just one step operation. This is useful to implement the 'step
- n' kind of commands. In case of asynchronous targets, we will have
- to set up a continuation to be done after the target stops (after
- this one step). For synch targets, the caller handles further
- stepping. */
+/* Prepare for one step in "step N". The actual target resumption is
+ done by the caller. Return true if we're done and should thus
+ report a stop to the user. Returns false if the target needs to be
+ resumed. */
-static void
-step_once (int skip_subroutines, int single_inst, int count, int thread)
+static int
+prepare_one_step (struct step_command_fsm *sm)
{
- struct frame_info *frame = get_current_frame ();
-
- if (count > 0)
+ if (sm->count > 0)
{
+ struct frame_info *frame = get_current_frame ();
+
/* Don't assume THREAD is a valid thread id. It is set to -1 if
the longjmp breakpoint was not required. Use the
INFERIOR_PTID thread instead, which is the same thread when
THREAD is set. */
struct thread_info *tp = inferior_thread ();
- clear_proceed_status (1);
set_step_frame ();
- if (!single_inst)
+ if (!sm->single_inst)
{
CORE_ADDR pc;
/* Step at an inlined function behaves like "down". */
- if (!skip_subroutines
+ if (!sm->skip_subroutines
&& inline_skipped_frames (inferior_ptid))
{
ptid_t resume_ptid;
set_running (resume_ptid, 1);
step_into_inline_frame (inferior_ptid);
- if (count > 1)
- step_once (skip_subroutines, single_inst, count - 1, thread);
- else
- {
- /* Pretend that we've stopped. */
- normal_stop ();
-
- if (target_can_async_p ())
- inferior_event_handler (INF_EXEC_COMPLETE, NULL);
- }
- return;
+ sm->count--;
+ return prepare_one_step (sm);
}
pc = get_frame_pc (frame);
&tp->control.step_range_end) == 0)
error (_("Cannot find bounds of current function"));
- target_terminal_ours ();
+ target_terminal::ours_for_output ();
printf_filtered (_("Single stepping until exit from function %s,"
"\nwhich has no line number information.\n"),
name);
{
/* Say we are stepping, but stop after one insn whatever it does. */
tp->control.step_range_start = tp->control.step_range_end = 1;
- if (!skip_subroutines)
+ if (!sm->skip_subroutines)
/* It is stepi.
Don't step over function calls, not even to functions lacking
line numbers. */
tp->control.step_over_calls = STEP_OVER_NONE;
}
- if (skip_subroutines)
+ if (sm->skip_subroutines)
tp->control.step_over_calls = STEP_OVER_ALL;
- tp->step_multi = (count > 1);
- tp->control.stepping_command = 1;
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
-
- /* For async targets, register a continuation to do any
- additional steps. For sync targets, the caller will handle
- further stepping. */
- if (target_can_async_p ())
- {
- struct step_1_continuation_args *args;
-
- args = xmalloc (sizeof (*args));
- args->skip_subroutines = skip_subroutines;
- args->single_inst = single_inst;
- args->count = count;
- args->thread = thread;
-
- add_intermediate_continuation (tp, step_1_continuation, args, xfree);
- }
+ return 0;
}
+
+ /* Done. */
+ thread_fsm_set_finished (&sm->thread_fsm);
+ return 1;
}
\f
/* Continue program at specified address. */
static void
-jump_command (char *arg, int from_tty)
+jump_command (const char *arg, int from_tty)
{
struct gdbarch *gdbarch = get_current_arch ();
CORE_ADDR addr;
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
struct symbol *fn;
struct symbol *sfn;
int async_exec;
- struct cleanup *args_chain;
ERROR_NO_INFERIOR;
ensure_not_tfind_mode ();
ensure_not_running ();
/* Find out whether we must run in the background. */
- arg = strip_bg_char (arg, &async_exec);
- args_chain = make_cleanup (xfree, arg);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (arg, &async_exec);
+ arg = stripped.get ();
prepare_execution_command (¤t_target, async_exec);
if (!arg)
error_no_arg (_("starting address"));
- sals = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
- if (sals.nelts != 1)
- {
- error (_("Unreasonable jump request"));
- }
-
- sal = sals.sals[0];
- xfree (sals.sals);
+ std::vector<symtab_and_line> sals
+ = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
+ if (sals.size () != 1)
+ error (_("Unreasonable jump request"));
- /* Done with ARGS. */
- do_cleanups (args_chain);
+ symtab_and_line &sal = sals[0];
if (sal.symtab == 0 && sal.pc == 0)
error (_("No source file has been specified."));
/* Continue program giving it specified signal. */
static void
-signal_command (char *signum_exp, int from_tty)
+signal_command (const char *signum_exp, int from_tty)
{
enum gdb_signal oursig;
int async_exec;
- struct cleanup *args_chain;
dont_repeat (); /* Too dangerous. */
ERROR_NO_INFERIOR;
ensure_not_running ();
/* Find out whether we must run in the background. */
- signum_exp = strip_bg_char (signum_exp, &async_exec);
- args_chain = make_cleanup (xfree, signum_exp);
+ gdb::unique_xmalloc_ptr<char> stripped
+ = strip_bg_char (signum_exp, &async_exec);
+ signum_exp = stripped.get ();
prepare_execution_command (¤t_target, async_exec);
{
if (!must_confirm)
printf_unfiltered (_("Note:\n"));
- printf_unfiltered (_(" Thread %d previously stopped with signal %s, %s.\n"),
- tp->num,
+ printf_unfiltered (_(" Thread %s previously stopped with signal %s, %s.\n"),
+ print_thread_id (tp),
gdb_signal_to_name (tp->suspend.stop_signal),
gdb_signal_to_string (tp->suspend.stop_signal));
must_confirm = 1;
}
if (must_confirm
- && !query (_("Continuing thread %d (the current thread) with specified signal will\n"
+ && !query (_("Continuing thread %s (the current thread) with specified signal will\n"
"still deliver the signals noted above to their respective threads.\n"
"Continue anyway? "),
- inferior_thread ()->num))
+ print_thread_id (inferior_thread ())))
error (_("Not confirmed."));
}
/* Queue a signal to be delivered to the current thread. */
static void
-queue_signal_command (char *signum_exp, int from_tty)
+queue_signal_command (const char *signum_exp, int from_tty)
{
enum gdb_signal oursig;
struct thread_info *tp;
tp->suspend.stop_signal = oursig;
}
-/* Continuation args to be passed to the "until" command
- continuation. */
-struct until_next_continuation_args
+/* Data for the FSM that manages the until (with no argument)
+ command. */
+
+struct until_next_fsm
{
- /* The thread that was current when the command was executed. */
+ /* The base class. */
+ struct thread_fsm thread_fsm;
+
+ /* The thread that as current when the command was executed. */
int thread;
};
-/* A continuation callback for until_next_command. */
+static int until_next_fsm_should_stop (struct thread_fsm *self,
+ struct thread_info *thread);
+static void until_next_fsm_clean_up (struct thread_fsm *self,
+ struct thread_info *thread);
+static enum async_reply_reason
+ until_next_fsm_async_reply_reason (struct thread_fsm *self);
+
+/* until_next_fsm's vtable. */
+
+static struct thread_fsm_ops until_next_fsm_ops =
+{
+ NULL, /* dtor */
+ until_next_fsm_clean_up,
+ until_next_fsm_should_stop,
+ NULL, /* return_value */
+ until_next_fsm_async_reply_reason,
+};
+
+/* Allocate a new until_next_fsm. */
+
+static struct until_next_fsm *
+new_until_next_fsm (struct interp *cmd_interp, int thread)
+{
+ struct until_next_fsm *sm;
+
+ sm = XCNEW (struct until_next_fsm);
+ thread_fsm_ctor (&sm->thread_fsm, &until_next_fsm_ops, cmd_interp);
+
+ sm->thread = thread;
+
+ return sm;
+}
+
+/* Implementation of the 'should_stop' FSM method for the until (with
+ no arg) command. */
+
+static int
+until_next_fsm_should_stop (struct thread_fsm *self,
+ struct thread_info *tp)
+{
+ if (tp->control.stop_step)
+ thread_fsm_set_finished (self);
+
+ return 1;
+}
+
+/* Implementation of the 'clean_up' FSM method for the until (with no
+ arg) command. */
static void
-until_next_continuation (void *arg, int err)
+until_next_fsm_clean_up (struct thread_fsm *self, struct thread_info *thread)
{
- struct until_next_continuation_args *a = arg;
+ delete_longjmp_breakpoint (thread->global_num);
+}
- delete_longjmp_breakpoint (a->thread);
+/* Implementation of the 'async_reply_reason' FSM method for the until
+ (with no arg) command. */
+
+static enum async_reply_reason
+until_next_fsm_async_reply_reason (struct thread_fsm *self)
+{
+ return EXEC_ASYNC_END_STEPPING_RANGE;
}
/* Proceed until we reach a different source line with pc greater than
struct symbol *func;
struct symtab_and_line sal;
struct thread_info *tp = inferior_thread ();
- int thread = tp->num;
+ int thread = tp->global_num;
struct cleanup *old_chain;
+ struct until_next_fsm *sm;
clear_proceed_status (0);
set_step_frame ();
tp->control.step_over_calls = STEP_OVER_ALL;
- tp->step_multi = 0; /* Only one call to proceed */
-
set_longjmp_breakpoint (tp, get_frame_id (frame));
old_chain = make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
-
- if (target_can_async_p () && is_running (inferior_ptid))
- {
- struct until_next_continuation_args *cont_args;
-
- discard_cleanups (old_chain);
- cont_args = XNEW (struct until_next_continuation_args);
- cont_args->thread = inferior_thread ()->num;
+ sm = new_until_next_fsm (command_interp (), tp->global_num);
+ tp->thread_fsm = &sm->thread_fsm;
+ discard_cleanups (old_chain);
- add_continuation (tp, until_next_continuation, cont_args, xfree);
- }
- else
- do_cleanups (old_chain);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
static void
-until_command (char *arg, int from_tty)
+until_command (const char *arg, int from_tty)
{
int async_exec;
- struct cleanup *args_chain;
ERROR_NO_INFERIOR;
ensure_not_tfind_mode ();
ensure_not_running ();
/* Find out whether we must run in the background. */
- arg = strip_bg_char (arg, &async_exec);
- args_chain = make_cleanup (xfree, arg);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (arg, &async_exec);
+ arg = stripped.get ();
prepare_execution_command (¤t_target, async_exec);
until_break_command (arg, from_tty, 0);
else
until_next_command (from_tty);
-
- /* Done with ARGS. */
- do_cleanups (args_chain);
}
static void
-advance_command (char *arg, int from_tty)
+advance_command (const char *arg, int from_tty)
{
int async_exec;
- struct cleanup *args_chain;
ERROR_NO_INFERIOR;
ensure_not_tfind_mode ();
error_no_arg (_("a location"));
/* Find out whether we must run in the background. */
- arg = strip_bg_char (arg, &async_exec);
- args_chain = make_cleanup (xfree, arg);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (arg, &async_exec);
+ arg = stripped.get ();
prepare_execution_command (¤t_target, async_exec);
until_break_command (arg, from_tty, 1);
-
- /* Done with ARGS. */
- do_cleanups (args_chain);
}
\f
/* Return the value of the result of a function at the end of a 'finish'
right after an inferior call has finished. */
struct value *
-get_return_value (struct value *function, struct type *value_type,
- struct dummy_frame_context_saver *ctx_saver)
+get_return_value (struct value *function, struct type *value_type)
{
- struct regcache *stop_regs = NULL;
- struct gdbarch *gdbarch;
+ regcache *stop_regs = get_current_regcache ();
+ struct gdbarch *gdbarch = stop_regs->arch ();
struct value *value;
- struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
-
- /* If registers were not saved, use the current registers. */
- if (ctx_saver != NULL)
- stop_regs = dummy_frame_context_saver_get_regs (ctx_saver);
- else
- {
- stop_regs = regcache_dup (get_current_regcache ());
- make_cleanup_regcache_xfree (stop_regs);
- }
-
- gdbarch = get_regcache_arch (stop_regs);
value_type = check_typedef (value_type);
gdb_assert (TYPE_CODE (value_type) != TYPE_CODE_VOID);
internal_error (__FILE__, __LINE__, _("bad switch"));
}
- do_cleanups (cleanup);
-
return value;
}
-/* Print the result of a function at the end of a 'finish' command.
- DTOR_DATA (if not NULL) can represent inferior registers right after
- an inferior call has finished. */
+/* The captured function return value/type and its position in the
+ value history. */
-static void
-print_return_value (struct value *function, struct type *value_type,
- struct dummy_frame_context_saver *ctx_saver)
+struct return_value_info
{
- struct value *value = get_return_value (function, value_type, ctx_saver);
- struct ui_out *uiout = current_uiout;
+ /* The captured return value. May be NULL if we weren't able to
+ retrieve it. See get_return_value. */
+ struct value *value;
+
+ /* The return type. In some cases, we'll not be able extract the
+ return value, but we always know the type. */
+ struct type *type;
+
+ /* If we captured a value, this is the value history index. */
+ int value_history_index;
+};
+
+/* Helper for print_return_value. */
- if (value)
+static void
+print_return_value_1 (struct ui_out *uiout, struct return_value_info *rv)
+{
+ if (rv->value != NULL)
{
struct value_print_options opts;
- struct ui_file *stb;
- struct cleanup *old_chain;
/* Print it. */
- stb = mem_fileopen ();
- old_chain = make_cleanup_ui_file_delete (stb);
- ui_out_text (uiout, "Value returned is ");
- ui_out_field_fmt (uiout, "gdb-result-var", "$%d",
- record_latest_value (value));
- ui_out_text (uiout, " = ");
+ uiout->text ("Value returned is ");
+ uiout->field_fmt ("gdb-result-var", "$%d",
+ rv->value_history_index);
+ uiout->text (" = ");
get_no_prettyformat_print_options (&opts);
- value_print (value, stb, &opts);
- ui_out_field_stream (uiout, "return-value", stb);
- ui_out_text (uiout, "\n");
- do_cleanups (old_chain);
+
+ string_file stb;
+
+ value_print (rv->value, &stb, &opts);
+ uiout->field_stream ("return-value", stb);
+ uiout->text ("\n");
}
else
{
- struct cleanup *oldchain;
- char *type_name;
+ std::string type_name = type_to_string (rv->type);
+ uiout->text ("Value returned has type: ");
+ uiout->field_string ("return-type", type_name.c_str ());
+ uiout->text (".");
+ uiout->text (" Cannot determine contents\n");
+ }
+}
+
+/* Print the result of a function at the end of a 'finish' command.
+ RV points at an object representing the captured return value/type
+ and its position in the value history. */
+
+void
+print_return_value (struct ui_out *uiout, struct return_value_info *rv)
+{
+ if (rv->type == NULL || TYPE_CODE (rv->type) == TYPE_CODE_VOID)
+ return;
- type_name = type_to_string (value_type);
- oldchain = make_cleanup (xfree, type_name);
- ui_out_text (uiout, "Value returned has type: ");
- ui_out_field_string (uiout, "return-type", type_name);
- ui_out_text (uiout, ".");
- ui_out_text (uiout, " Cannot determine contents\n");
- do_cleanups (oldchain);
+ TRY
+ {
+ /* print_return_value_1 can throw an exception in some
+ circumstances. We need to catch this so that we still
+ delete the breakpoint. */
+ print_return_value_1 (uiout, rv);
+ }
+ CATCH (ex, RETURN_MASK_ALL)
+ {
+ exception_print (gdb_stdout, ex);
}
+ END_CATCH
}
-/* Stuff that needs to be done by the finish command after the target
- has stopped. In asynchronous mode, we wait for the target to stop
- in the call to poll or select in the event loop, so it is
- impossible to do all the stuff as part of the finish_command
- function itself. The only chance we have to complete this command
- is in fetch_inferior_event, which is called by the event loop as
- soon as it detects that the target has stopped. */
+/* Data for the FSM that manages the finish command. */
-struct finish_command_continuation_args
+struct finish_command_fsm
{
- /* The thread that as current when the command was executed. */
- int thread;
+ /* The base class. */
+ struct thread_fsm thread_fsm;
+
+ /* The momentary breakpoint set at the function's return address in
+ the caller. */
struct breakpoint *breakpoint;
+
+ /* The function that we're stepping out of. */
struct symbol *function;
- /* Inferior registers stored right before dummy_frame has been freed
- after an inferior call. It can be NULL if no inferior call was
- involved, GDB will then use current inferior registers. */
- struct dummy_frame_context_saver *ctx_saver;
+ /* If the FSM finishes successfully, this stores the function's
+ return value. */
+ struct return_value_info return_value;
};
-static void
-finish_command_continuation (void *arg, int err)
+static int finish_command_fsm_should_stop (struct thread_fsm *self,
+ struct thread_info *thread);
+static void finish_command_fsm_clean_up (struct thread_fsm *self,
+ struct thread_info *thread);
+static struct return_value_info *
+ finish_command_fsm_return_value (struct thread_fsm *self);
+static enum async_reply_reason
+ finish_command_fsm_async_reply_reason (struct thread_fsm *self);
+
+/* finish_command_fsm's vtable. */
+
+static struct thread_fsm_ops finish_command_fsm_ops =
+{
+ NULL, /* dtor */
+ finish_command_fsm_clean_up,
+ finish_command_fsm_should_stop,
+ finish_command_fsm_return_value,
+ finish_command_fsm_async_reply_reason,
+ NULL, /* should_notify_stop */
+};
+
+/* Allocate a new finish_command_fsm. */
+
+static struct finish_command_fsm *
+new_finish_command_fsm (struct interp *cmd_interp)
{
- struct finish_command_continuation_args *a = arg;
+ struct finish_command_fsm *sm;
- if (!err)
- {
- struct thread_info *tp = NULL;
- bpstat bs = NULL;
+ sm = XCNEW (struct finish_command_fsm);
+ thread_fsm_ctor (&sm->thread_fsm, &finish_command_fsm_ops, cmd_interp);
- if (!ptid_equal (inferior_ptid, null_ptid)
- && target_has_execution
- && is_stopped (inferior_ptid))
- {
- tp = inferior_thread ();
- bs = tp->control.stop_bpstat;
- }
+ return sm;
+}
- if (bpstat_find_breakpoint (bs, a->breakpoint) != NULL
- && a->function != NULL)
- {
- struct type *value_type;
+/* Implementation of the 'should_stop' FSM method for the finish
+ commands. Detects whether the thread stepped out of the function
+ successfully, and if so, captures the function's return value and
+ marks the FSM finished. */
- value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (a->function));
- if (!value_type)
- internal_error (__FILE__, __LINE__,
- _("finish_command: function has no target type"));
+static int
+finish_command_fsm_should_stop (struct thread_fsm *self,
+ struct thread_info *tp)
+{
+ struct finish_command_fsm *f = (struct finish_command_fsm *) self;
+ struct return_value_info *rv = &f->return_value;
- if (TYPE_CODE (value_type) != TYPE_CODE_VOID)
- {
- struct value *func;
+ if (f->function != NULL
+ && bpstat_find_breakpoint (tp->control.stop_bpstat,
+ f->breakpoint) != NULL)
+ {
+ /* We're done. */
+ thread_fsm_set_finished (self);
- func = read_var_value (a->function, get_current_frame ());
- TRY
- {
- /* print_return_value can throw an exception in some
- circumstances. We need to catch this so that we still
- delete the breakpoint. */
- print_return_value (func, value_type, a->ctx_saver);
- }
- CATCH (ex, RETURN_MASK_ALL)
- {
- exception_print (gdb_stdout, ex);
- }
- END_CATCH
- }
- }
+ rv->type = TYPE_TARGET_TYPE (SYMBOL_TYPE (f->function));
+ if (rv->type == NULL)
+ internal_error (__FILE__, __LINE__,
+ _("finish_command: function has no target type"));
+
+ if (TYPE_CODE (rv->type) != TYPE_CODE_VOID)
+ {
+ struct value *func;
- /* We suppress normal call of normal_stop observer and do it
- here so that the *stopped notification includes the return
- value. */
- if (bs != NULL && tp->control.proceed_to_finish)
- observer_notify_normal_stop (bs, 1 /* print frame */);
+ func = read_var_value (f->function, NULL, get_current_frame ());
+ rv->value = get_return_value (func, rv->type);
+ if (rv->value != NULL)
+ rv->value_history_index = record_latest_value (rv->value);
+ }
+ }
+ else if (tp->control.stop_step)
+ {
+ /* Finishing from an inline frame, or reverse finishing. In
+ either case, there's no way to retrieve the return value. */
+ thread_fsm_set_finished (self);
}
- delete_breakpoint (a->breakpoint);
- delete_longjmp_breakpoint (a->thread);
+ return 1;
}
+/* Implementation of the 'clean_up' FSM method for the finish
+ commands. */
+
static void
-finish_command_continuation_free_arg (void *arg)
+finish_command_fsm_clean_up (struct thread_fsm *self,
+ struct thread_info *thread)
{
- struct finish_command_continuation_args *cargs = arg;
+ struct finish_command_fsm *f = (struct finish_command_fsm *) self;
- if (cargs->ctx_saver != NULL)
- dummy_frame_context_saver_drop (cargs->ctx_saver);
- xfree (cargs);
+ if (f->breakpoint != NULL)
+ {
+ delete_breakpoint (f->breakpoint);
+ f->breakpoint = NULL;
+ }
+ delete_longjmp_breakpoint (thread->global_num);
+}
+
+/* Implementation of the 'return_value' FSM method for the finish
+ commands. */
+
+static struct return_value_info *
+finish_command_fsm_return_value (struct thread_fsm *self)
+{
+ struct finish_command_fsm *f = (struct finish_command_fsm *) self;
+
+ return &f->return_value;
+}
+
+/* Implementation of the 'async_reply_reason' FSM method for the
+ finish commands. */
+
+static enum async_reply_reason
+finish_command_fsm_async_reply_reason (struct thread_fsm *self)
+{
+ if (execution_direction == EXEC_REVERSE)
+ return EXEC_ASYNC_END_STEPPING_RANGE;
+ else
+ return EXEC_ASYNC_FUNCTION_FINISHED;
}
/* finish_backward -- helper function for finish_command. */
static void
-finish_backward (struct symbol *function)
+finish_backward (struct finish_command_fsm *sm)
{
struct symtab_and_line sal;
struct thread_info *tp = inferior_thread ();
{
struct frame_info *frame = get_selected_frame (NULL);
struct gdbarch *gdbarch = get_frame_arch (frame);
- struct symtab_and_line sr_sal;
/* Set a step-resume at the function's entry point. Once that's
hit, we'll do one more step backwards. */
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = sal.pc;
sr_sal.pspace = get_frame_program_space (frame);
insert_step_resume_breakpoint_at_sal (gdbarch,
}
}
-/* finish_forward -- helper function for finish_command. */
+/* finish_forward -- helper function for finish_command. FRAME is the
+ frame that called the function we're about to step out of. */
static void
-finish_forward (struct symbol *function, struct frame_info *frame)
+finish_forward (struct finish_command_fsm *sm, struct frame_info *frame)
{
struct frame_id frame_id = get_frame_id (frame);
struct gdbarch *gdbarch = get_frame_arch (frame);
struct symtab_and_line sal;
struct thread_info *tp = inferior_thread ();
- struct breakpoint *breakpoint;
- struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
- struct finish_command_continuation_args *cargs;
- int thread = tp->num;
- struct dummy_frame_context_saver *saver = NULL;
sal = find_pc_line (get_frame_pc (frame), 0);
sal.pc = get_frame_pc (frame);
- if (get_frame_type (frame) == DUMMY_FRAME)
- {
- saver = dummy_frame_context_saver_setup (get_stack_frame_id (frame),
- inferior_ptid);
- make_cleanup (dummy_frame_context_saver_cleanup, saver);
- }
-
- breakpoint = set_momentary_breakpoint (gdbarch, sal,
- get_stack_frame_id (frame),
- bp_finish);
+ sm->breakpoint = set_momentary_breakpoint (gdbarch, sal,
+ get_stack_frame_id (frame),
+ bp_finish).release ();
/* set_momentary_breakpoint invalidates FRAME. */
frame = NULL;
- make_cleanup_delete_breakpoint (breakpoint);
-
set_longjmp_breakpoint (tp, frame_id);
- make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
/* We want to print return value, please... */
tp->control.proceed_to_finish = 1;
- cargs = xmalloc (sizeof (*cargs));
-
- cargs->thread = thread;
- cargs->breakpoint = breakpoint;
- cargs->function = function;
- cargs->ctx_saver = saver;
- add_continuation (tp, finish_command_continuation, cargs,
- finish_command_continuation_free_arg);
+
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
+}
- discard_cleanups (old_chain);
- if (!target_can_async_p ())
- do_all_continuations (0);
+/* Skip frames for "finish". */
+
+static struct frame_info *
+skip_finish_frames (struct frame_info *frame)
+{
+ struct frame_info *start;
+
+ do
+ {
+ start = frame;
+
+ frame = skip_tailcall_frames (frame);
+ if (frame == NULL)
+ break;
+
+ frame = skip_unwritable_frames (frame);
+ if (frame == NULL)
+ break;
+ }
+ while (start != frame);
+
+ return frame;
}
/* "finish": Set a temporary breakpoint at the place the selected
frame will return to, then continue. */
static void
-finish_command (char *arg, int from_tty)
+finish_command (const char *arg, int from_tty)
{
struct frame_info *frame;
- struct symbol *function;
int async_exec;
- struct cleanup *args_chain;
+ struct finish_command_fsm *sm;
+ struct thread_info *tp;
ERROR_NO_INFERIOR;
ensure_not_tfind_mode ();
ensure_not_running ();
/* Find out whether we must run in the background. */
- arg = strip_bg_char (arg, &async_exec);
- args_chain = make_cleanup (xfree, arg);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (arg, &async_exec);
+ arg = stripped.get ();
prepare_execution_command (¤t_target, async_exec);
if (arg)
error (_("The \"finish\" command does not take any arguments."));
- /* Done with ARGS. */
- do_cleanups (args_chain);
-
frame = get_prev_frame (get_selected_frame (_("No selected frame.")));
if (frame == 0)
error (_("\"finish\" not meaningful in the outermost frame."));
clear_proceed_status (0);
+ tp = inferior_thread ();
+
+ sm = new_finish_command_fsm (command_interp ());
+
+ tp->thread_fsm = &sm->thread_fsm;
+
/* Finishing from an inline frame is completely different. We don't
- try to show the "return value" - no way to locate it. So we do
- not need a completion. */
+ try to show the "return value" - no way to locate it. */
if (get_frame_type (get_selected_frame (_("No selected frame.")))
== INLINE_FRAME)
{
called by that frame. We don't use the magic "1" value for
step_range_end, because then infrun will think this is nexti,
and not step over the rest of this inlined function call. */
- struct thread_info *tp = inferior_thread ();
- struct symtab_and_line empty_sal;
-
- init_sal (&empty_sal);
- set_step_info (frame, empty_sal);
+ set_step_info (frame, {});
tp->control.step_range_start = get_frame_pc (frame);
tp->control.step_range_end = tp->control.step_range_start;
tp->control.step_over_calls = STEP_OVER_ALL;
return;
}
- /* Ignore TAILCALL_FRAME type frames, they were executed already before
- entering THISFRAME. */
- while (get_frame_type (frame) == TAILCALL_FRAME)
- frame = get_prev_frame (frame);
-
/* Find the function we will return from. */
- function = find_pc_function (get_frame_pc (get_selected_frame (NULL)));
+ sm->function = find_pc_function (get_frame_pc (get_selected_frame (NULL)));
/* Print info on the selected frame, including level number but not
source. */
printf_filtered (_("Run back to call of "));
else
{
- if (function != NULL && TYPE_NO_RETURN (function->type)
+ if (sm->function != NULL && TYPE_NO_RETURN (sm->function->type)
&& !query (_("warning: Function %s does not return normally.\n"
"Try to finish anyway? "),
- SYMBOL_PRINT_NAME (function)))
+ SYMBOL_PRINT_NAME (sm->function)))
error (_("Not confirmed."));
printf_filtered (_("Run till exit from "));
}
}
if (execution_direction == EXEC_REVERSE)
- finish_backward (function);
+ finish_backward (sm);
else
- finish_forward (function, frame);
+ {
+ frame = skip_finish_frames (frame);
+
+ if (frame == NULL)
+ error (_("Cannot find the caller frame."));
+
+ finish_forward (sm, frame);
+ }
}
\f
static void
-program_info (char *args, int from_tty)
+info_program_command (const char *args, int from_tty)
{
bpstat bs;
int num, stat;
}
\f
static void
-environment_info (char *var, int from_tty)
+environment_info (const char *var, int from_tty)
{
if (var)
{
- char *val = get_in_environ (current_inferior ()->environment, var);
+ const char *val = current_inferior ()->environment.get (var);
if (val)
{
}
else
{
- char **vector = environ_vector (current_inferior ()->environment);
+ char **envp = current_inferior ()->environment.envp ();
- while (*vector)
+ for (int idx = 0; envp[idx] != NULL; ++idx)
{
- puts_filtered (*vector++);
+ puts_filtered (envp[idx]);
puts_filtered ("\n");
}
}
}
static void
-set_environment_command (char *arg, int from_tty)
+set_environment_command (const char *arg, int from_tty)
{
- char *p, *val, *var;
+ const char *p, *val;
int nullset = 0;
if (arg == 0)
while (p != arg && (p[-1] == ' ' || p[-1] == '\t'))
p--;
- var = savestring (arg, p - arg);
+ std::string var (arg, p - arg);
if (nullset)
{
printf_filtered (_("Setting environment variable "
"\"%s\" to null value.\n"),
- var);
- set_in_environ (current_inferior ()->environment, var, "");
+ var.c_str ());
+ current_inferior ()->environment.set (var.c_str (), "");
}
else
- set_in_environ (current_inferior ()->environment, var, val);
- xfree (var);
+ current_inferior ()->environment.set (var.c_str (), val);
}
static void
-unset_environment_command (char *var, int from_tty)
+unset_environment_command (const char *var, int from_tty)
{
if (var == 0)
{
/* If there is no argument, delete all environment variables.
Ask for confirmation if reading from the terminal. */
if (!from_tty || query (_("Delete all environment variables? ")))
- {
- free_environ (current_inferior ()->environment);
- current_inferior ()->environment = make_environ ();
- }
+ current_inferior ()->environment.clear ();
}
else
- unset_in_environ (current_inferior ()->environment, var);
+ current_inferior ()->environment.unset (var);
}
/* Handle the execution path (PATH variable). */
static const char path_var_name[] = "PATH";
static void
-path_info (char *args, int from_tty)
+path_info (const char *args, int from_tty)
{
puts_filtered ("Executable and object file path: ");
- puts_filtered (get_in_environ (current_inferior ()->environment,
- path_var_name));
+ puts_filtered (current_inferior ()->environment.get (path_var_name));
puts_filtered ("\n");
}
/* Add zero or more directories to the front of the execution path. */
static void
-path_command (char *dirname, int from_tty)
+path_command (const char *dirname, int from_tty)
{
char *exec_path;
- char *env;
+ const char *env;
dont_repeat ();
- env = get_in_environ (current_inferior ()->environment, path_var_name);
+ env = current_inferior ()->environment.get (path_var_name);
/* Can be null if path is not set. */
if (!env)
env = "";
exec_path = xstrdup (env);
mod_path (dirname, &exec_path);
- set_in_environ (current_inferior ()->environment, path_var_name, exec_path);
+ current_inferior ()->environment.set (path_var_name, exec_path);
xfree (exec_path);
if (from_tty)
path_info ((char *) NULL, from_tty);
}
\f
+static void
+pad_to_column (string_file &stream, int col)
+{
+ /* At least one space must be printed to separate columns. */
+ stream.putc (' ');
+ const int size = stream.size ();
+ if (size < col)
+ stream.puts (n_spaces (col - size));
+}
+
/* Print out the register NAME with value VAL, to FILE, in the default
fashion. */
{
struct type *regtype = value_type (val);
int print_raw_format;
+ string_file format_stream;
+ enum tab_stops
+ {
+ value_column_1 = 15,
+ /* Give enough room for "0x", 16 hex digits and two spaces in
+ preceding column. */
+ value_column_2 = value_column_1 + 2 + 16 + 2,
+ };
- fputs_filtered (name, file);
- print_spaces_filtered (15 - strlen (name), file);
+ format_stream.puts (name);
+ pad_to_column (format_stream, value_column_1);
print_raw_format = (value_entirely_available (val)
&& !value_optimized_out (val));
if (TYPE_CODE (regtype) == TYPE_CODE_FLT
|| TYPE_CODE (regtype) == TYPE_CODE_DECFLOAT)
{
- int j;
struct value_print_options opts;
const gdb_byte *valaddr = value_contents_for_printing (val);
enum bfd_endian byte_order = gdbarch_byte_order (get_type_arch (regtype));
opts.deref_ref = 1;
val_print (regtype,
- value_contents_for_printing (val),
value_embedded_offset (val), 0,
- file, 0, val, &opts, current_language);
+ &format_stream, 0, val, &opts, current_language);
if (print_raw_format)
{
- fprintf_filtered (file, "\t(raw ");
- print_hex_chars (file, valaddr, TYPE_LENGTH (regtype), byte_order);
- fprintf_filtered (file, ")");
+ pad_to_column (format_stream, value_column_2);
+ format_stream.puts ("(raw ");
+ print_hex_chars (&format_stream, valaddr, TYPE_LENGTH (regtype),
+ byte_order, true);
+ format_stream.putc (')');
}
}
else
get_formatted_print_options (&opts, 'x');
opts.deref_ref = 1;
val_print (regtype,
- value_contents_for_printing (val),
value_embedded_offset (val), 0,
- file, 0, val, &opts, current_language);
+ &format_stream, 0, val, &opts, current_language);
/* If not a vector register, print it also according to its
natural format. */
if (print_raw_format && TYPE_VECTOR (regtype) == 0)
{
+ pad_to_column (format_stream, value_column_2);
get_user_print_options (&opts);
opts.deref_ref = 1;
- fprintf_filtered (file, "\t");
val_print (regtype,
- value_contents_for_printing (val),
value_embedded_offset (val), 0,
- file, 0, val, &opts, current_language);
+ &format_stream, 0, val, &opts, current_language);
}
}
+ fputs_filtered (format_stream.c_str (), file);
fprintf_filtered (file, "\n");
}
}
void
-registers_info (char *addr_exp, int fpregs)
+registers_info (const char *addr_exp, int fpregs)
{
struct frame_info *frame;
struct gdbarch *gdbarch;
while (*addr_exp != '\0')
{
- char *start;
+ const char *start;
const char *end;
/* Skip leading white space. */
}
static void
-all_registers_info (char *addr_exp, int from_tty)
+info_all_registers_command (const char *addr_exp, int from_tty)
{
registers_info (addr_exp, 1);
}
static void
-nofp_registers_info (char *addr_exp, int from_tty)
+info_registers_command (const char *addr_exp, int from_tty)
{
registers_info (addr_exp, 0);
}
}
static void
-vector_info (char *args, int from_tty)
+info_vector_command (const char *args, int from_tty)
{
if (!target_has_registers)
error (_("The program has no registers now."));
/* Kill the inferior process. Make us have no inferior. */
static void
-kill_command (char *arg, int from_tty)
+kill_command (const char *arg, int from_tty)
{
/* FIXME: This should not really be inferior_ptid (or target_has_execution).
It should be a distinct flag that indicates that a target is active, cuz
{
/* Don't error out if the current thread is running, because
there may be other stopped threads. */
- struct cleanup *old_chain;
/* Backup current thread and selected frame. */
- old_chain = make_cleanup_restore_current_thread ();
+ scoped_restore_current_thread restore_thread;
iterate_over_threads (proceed_after_attach_callback, &pid);
-
- /* Restore selected ptid. */
- do_cleanups (old_chain);
}
-/* attach_command --
- takes a program started up outside of gdb and ``attaches'' to it.
- This stops it cold in its tracks and allows us to start debugging it.
- and wait for the trace-trap that results from attaching. */
+/* See inferior.h. */
-static void
-attach_command_post_wait (char *args, int from_tty, int async_exec)
+void
+setup_inferior (int from_tty)
{
struct inferior *inferior;
inferior = current_inferior ();
- inferior->control.stop_soon = NO_STOP_QUIETLY;
+ inferior->needs_setup = 0;
/* If no exec file is yet known, try to determine it from the
process itself. */
if (get_exec_file (0) == NULL)
- exec_file_locate_attach (ptid_get_pid (inferior_ptid), from_tty);
+ exec_file_locate_attach (ptid_get_pid (inferior_ptid), 1, from_tty);
else
{
reopen_exec_file ();
target_post_attach (ptid_get_pid (inferior_ptid));
post_create_inferior (¤t_target, from_tty);
+}
+
+/* What to do after the first program stops after attaching. */
+enum attach_post_wait_mode
+{
+ /* Do nothing. Leaves threads as they are. */
+ ATTACH_POST_WAIT_NOTHING,
+
+ /* Re-resume threads that are marked running. */
+ ATTACH_POST_WAIT_RESUME,
+
+ /* Stop all threads. */
+ ATTACH_POST_WAIT_STOP,
+};
+
+/* Called after we've attached to a process and we've seen it stop for
+ the first time. If ASYNC_EXEC is true, re-resume threads that
+ should be running. Else if ATTACH, */
+
+static void
+attach_post_wait (const char *args, int from_tty, enum attach_post_wait_mode mode)
+{
+ struct inferior *inferior;
+
+ inferior = current_inferior ();
+ inferior->control.stop_soon = NO_STOP_QUIETLY;
+
+ if (inferior->needs_setup)
+ setup_inferior (from_tty);
- if (async_exec)
+ if (mode == ATTACH_POST_WAIT_RESUME)
{
/* The user requested an `attach&', so be sure to leave threads
that didn't get a signal running. */
}
}
}
- else
+ else if (mode == ATTACH_POST_WAIT_STOP)
{
/* The user requested a plain `attach', so be sure to leave
the inferior stopped. */
- if (target_can_async_p ())
- async_enable_stdin ();
-
/* At least the current thread is already stopped. */
/* In all-stop, by definition, all threads have to be already
should have no effect on already stopped threads. */
if (non_stop)
target_stop (pid_to_ptid (inferior->pid));
+ else if (target_is_non_stop_p ())
+ {
+ struct thread_info *thread;
+ struct thread_info *lowest = inferior_thread ();
+ int pid = current_inferior ()->pid;
+
+ stop_all_threads ();
+
+ /* It's not defined which thread will report the attach
+ stop. For consistency, always select the thread with
+ lowest GDB number, which should be the main thread, if it
+ still exists. */
+ ALL_NON_EXITED_THREADS (thread)
+ {
+ if (ptid_get_pid (thread->ptid) == pid)
+ {
+ if (thread->inf->num < lowest->inf->num
+ || thread->per_inf_num < lowest->per_inf_num)
+ lowest = thread;
+ }
+ }
+
+ switch_to_thread (lowest->ptid);
+ }
/* Tell the user/frontend where we're stopped. */
normal_stop ();
{
char *args;
int from_tty;
- int async_exec;
+ enum attach_post_wait_mode mode;
};
static void
attach_command_continuation (void *args, int err)
{
- struct attach_command_continuation_args *a = args;
+ struct attach_command_continuation_args *a
+ = (struct attach_command_continuation_args *) args;
if (err)
return;
- attach_command_post_wait (a->args, a->from_tty, a->async_exec);
+ attach_post_wait (a->args, a->from_tty, a->mode);
}
static void
attach_command_continuation_free_args (void *args)
{
- struct attach_command_continuation_args *a = args;
+ struct attach_command_continuation_args *a
+ = (struct attach_command_continuation_args *) args;
xfree (a->args);
xfree (a);
}
+/* "attach" command entry point. Takes a program started up outside
+ of gdb and ``attaches'' to it. This stops it cold in its tracks
+ and allows us to start debugging it. */
+
void
-attach_command (char *args, int from_tty)
+attach_command (const char *args, int from_tty)
{
int async_exec;
- struct cleanup *args_chain;
struct target_ops *attach_target;
+ struct inferior *inferior = current_inferior ();
+ enum attach_post_wait_mode mode;
dont_repeat (); /* Not for the faint of heart */
this function should probably be moved into target_pre_inferior. */
target_pre_inferior (from_tty);
- args = strip_bg_char (args, &async_exec);
- args_chain = make_cleanup (xfree, args);
+ gdb::unique_xmalloc_ptr<char> stripped = strip_bg_char (args, &async_exec);
+ args = stripped.get ();
attach_target = find_attach_target ();
shouldn't refer to attach_target again. */
attach_target = NULL;
- /* Done with ARGS. */
- do_cleanups (args_chain);
-
/* Set up the "saved terminal modes" of the inferior
based on what modes we are starting it with. */
- target_terminal_init ();
+ target_terminal::init ();
/* Install inferior's terminal modes. This may look like a no-op,
as we've just saved them above, however, this does more than
while we're in the event loop waiting for that stop. That is,
before the attach continuation runs and the command is really
finished. */
- target_terminal_inferior ();
+ target_terminal::inferior ();
/* Set up execution context to know that we should return from
wait_for_inferior as soon as the target reports a stop. */
init_wait_for_inferior ();
clear_proceed_status (0);
- if (non_stop)
+ inferior->needs_setup = 1;
+
+ if (target_is_non_stop_p ())
{
/* If we find that the current thread isn't stopped, explicitly
do so now, because we're going to install breakpoints and
target_stop (pid_to_ptid (ptid_get_pid (inferior_ptid)));
}
+ mode = async_exec ? ATTACH_POST_WAIT_RESUME : ATTACH_POST_WAIT_STOP;
+
/* Some system don't generate traps when attaching to inferior.
E.g. Mach 3 or GNU hurd. */
if (!target_attach_no_wait)
{
- struct inferior *inferior = current_inferior ();
+ struct attach_command_continuation_args *a;
/* Careful here. See comments in inferior.h. Basically some
OSes don't ignore SIGSTOPs on continue requests anymore. We
STOP_QUIETLY_NO_SIGSTOP is for. */
inferior->control.stop_soon = STOP_QUIETLY_NO_SIGSTOP;
- if (target_can_async_p ())
- {
- /* sync_execution mode. Wait for stop. */
- struct attach_command_continuation_args *a;
-
- a = xmalloc (sizeof (*a));
- a->args = xstrdup (args);
- a->from_tty = from_tty;
- a->async_exec = async_exec;
- add_inferior_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
- return;
- }
+ /* Wait for stop. */
+ a = XNEW (struct attach_command_continuation_args);
+ a->args = xstrdup (args);
+ a->from_tty = from_tty;
+ a->mode = mode;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
- wait_for_inferior ();
+ if (!target_is_async_p ())
+ mark_infrun_async_event_handler ();
+ return;
}
- attach_command_post_wait (args, from_tty, async_exec);
+ attach_post_wait (args, from_tty, mode);
}
/* We had just found out that the target was already attached to an
void
notice_new_inferior (ptid_t ptid, int leave_running, int from_tty)
{
- struct cleanup* old_chain;
- int async_exec;
-
- old_chain = make_cleanup (null_cleanup, NULL);
+ enum attach_post_wait_mode mode
+ = leave_running ? ATTACH_POST_WAIT_RESUME : ATTACH_POST_WAIT_NOTHING;
- /* If in non-stop, leave threads as running as they were. If
- they're stopped for some reason other than us telling it to, the
- target reports a signal != GDB_SIGNAL_0. We don't try to
- resume threads with such a stop signal. */
- async_exec = non_stop;
+ gdb::optional<scoped_restore_current_thread> restore_thread;
- if (!ptid_equal (inferior_ptid, null_ptid))
- make_cleanup_restore_current_thread ();
+ if (inferior_ptid != null_ptid)
+ restore_thread.emplace ();
- switch_to_thread (ptid);
+ /* Avoid reading registers -- we haven't fetched the target
+ description yet. */
+ switch_to_thread_no_regs (find_thread_ptid (ptid));
/* When we "notice" a new inferior we need to do all the things we
would normally do if we had just attached to it. */
if (is_executing (inferior_ptid))
{
+ struct attach_command_continuation_args *a;
struct inferior *inferior = current_inferior ();
/* We're going to install breakpoints, and poke at memory,
inferior->control.stop_soon = STOP_QUIETLY_REMOTE;
/* Wait for stop before proceeding. */
- if (target_can_async_p ())
- {
- struct attach_command_continuation_args *a;
+ a = XNEW (struct attach_command_continuation_args);
+ a->args = xstrdup ("");
+ a->from_tty = from_tty;
+ a->mode = mode;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
- a = xmalloc (sizeof (*a));
- a->args = xstrdup ("");
- a->from_tty = from_tty;
- a->async_exec = async_exec;
- add_inferior_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
-
- do_cleanups (old_chain);
- return;
- }
- else
- wait_for_inferior ();
+ return;
}
- async_exec = leave_running;
- attach_command_post_wait ("" /* args */, from_tty, async_exec);
-
- do_cleanups (old_chain);
+ attach_post_wait ("" /* args */, from_tty, mode);
}
/*
*/
void
-detach_command (char *args, int from_tty)
+detach_command (const char *args, int from_tty)
{
dont_repeat (); /* Not for the faint of heart. */
disconnect_tracing ();
- target_detach (args, from_tty);
+ target_detach (current_inferior (), from_tty);
+
+ /* The current inferior process was just detached successfully. Get
+ rid of breakpoints that no longer make sense. Note we don't do
+ this within target_detach because that is also used when
+ following child forks, and in that case we will want to transfer
+ breakpoints to the child, not delete them. */
+ breakpoint_init_inferior (inf_exited);
/* If the solist is global across inferiors, don't clear it when we
detach from a single inferior. */
stopped processes on some native platforms (e.g. GNU/Linux). */
static void
-disconnect_command (char *args, int from_tty)
+disconnect_command (const char *args, int from_tty)
{
dont_repeat (); /* Not for the faint of heart. */
query_if_trace_running (from_tty);
ptid = minus_one_ptid;
else
ptid = inferior_ptid;
- target_stop (ptid);
+
+ if (non_stop)
+ target_stop (ptid);
+ else
+ target_interrupt ();
/* Tag the thread as having been explicitly requested to stop, so
other parts of gdb know not to resume this thread automatically,
/* interrupt [-a]
Stop the execution of the target while running in async mode, in
- the backgound. In all-stop, stop the whole process. In non-stop
+ the background. In all-stop, stop the whole process. In non-stop
mode, stop the current thread only by default, or stop all threads
if the `-a' switch is used. */
static void
-interrupt_command (char *args, int from_tty)
+interrupt_command (const char *args, int from_tty)
{
if (target_can_async_p ())
{
}
static void
-float_info (char *args, int from_tty)
+info_float_command (const char *args, int from_tty)
{
struct frame_info *frame;
}
\f
static void
-unset_command (char *args, int from_tty)
+unset_command (const char *args, int from_tty)
{
printf_filtered (_("\"unset\" must be followed by the "
"name of an unset subcommand.\n"));
/* Implement `info proc' family of commands. */
static void
-info_proc_cmd_1 (char *args, enum info_proc_what what, int from_tty)
+info_proc_cmd_1 (const char *args, enum info_proc_what what, int from_tty)
{
struct gdbarch *gdbarch = get_current_arch ();
/* Implement `info proc' when given without any futher parameters. */
static void
-info_proc_cmd (char *args, int from_tty)
+info_proc_cmd (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_MINIMAL, from_tty);
}
/* Implement `info proc mappings'. */
static void
-info_proc_cmd_mappings (char *args, int from_tty)
+info_proc_cmd_mappings (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_MAPPINGS, from_tty);
}
/* Implement `info proc stat'. */
static void
-info_proc_cmd_stat (char *args, int from_tty)
+info_proc_cmd_stat (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_STAT, from_tty);
}
/* Implement `info proc status'. */
static void
-info_proc_cmd_status (char *args, int from_tty)
+info_proc_cmd_status (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_STATUS, from_tty);
}
/* Implement `info proc cwd'. */
static void
-info_proc_cmd_cwd (char *args, int from_tty)
+info_proc_cmd_cwd (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_CWD, from_tty);
}
/* Implement `info proc cmdline'. */
static void
-info_proc_cmd_cmdline (char *args, int from_tty)
+info_proc_cmd_cmdline (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_CMDLINE, from_tty);
}
/* Implement `info proc exe'. */
static void
-info_proc_cmd_exe (char *args, int from_tty)
+info_proc_cmd_exe (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_EXE, from_tty);
}
/* Implement `info proc all'. */
static void
-info_proc_cmd_all (char *args, int from_tty)
+info_proc_cmd_all (const char *args, int from_tty)
{
info_proc_cmd_1 (args, IP_ALL, from_tty);
}
+/* This help string is used for the run, start, and starti commands.
+ It is defined as a macro to prevent duplication. */
+
+#define RUN_ARGS_HELP \
+"You may specify arguments to give it.\n\
+Args may include \"*\", or \"[...]\"; they are expanded using the\n\
+shell that will start the program (specified by the \"$SHELL\" environment\n\
+variable). Input and output redirection with \">\", \"<\", or \">>\"\n\
+are also allowed.\n\
+\n\
+With no arguments, uses arguments last specified (with \"run\" or \n\
+\"set args\"). To cancel previous arguments and run with no arguments,\n\
+use \"set args\" without arguments.\n\
+\n\
+To start the inferior without using a shell, use \"set startup-with-shell off\"."
+
void
_initialize_infcmd (void)
{
const char *cmd_name;
/* Add the filename of the terminal connected to inferior I/O. */
- add_setshow_filename_cmd ("inferior-tty", class_run,
- &inferior_io_terminal_scratch, _("\
+ add_setshow_optional_filename_cmd ("inferior-tty", class_run,
+ &inferior_io_terminal_scratch, _("\
Set terminal for future runs of program being debugged."), _("\
Show terminal for future runs of program being debugged."), _("\
-Usage: set inferior-tty /dev/pts/1"),
- set_inferior_tty_command,
- show_inferior_tty_command,
- &setlist, &showlist);
- add_com_alias ("tty", "set inferior-tty", class_alias, 0);
+Usage: set inferior-tty [TTY]\n\n\
+If TTY is omitted, the default behavior of using the same terminal as GDB\n\
+is restored."),
+ set_inferior_tty_command,
+ show_inferior_tty_command,
+ &setlist, &showlist);
+ cmd_name = "inferior-tty";
+ c = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ gdb_assert (c != NULL);
+ add_alias_cmd ("tty", c, class_alias, 0, &cmdlist);
cmd_name = "args";
add_setshow_string_noescape_cmd (cmd_name, class_run,
gdb_assert (c != NULL);
set_cmd_completer (c, filename_completer);
+ cmd_name = "cwd";
+ add_setshow_string_noescape_cmd (cmd_name, class_run,
+ &inferior_cwd_scratch, _("\
+Set the current working directory to be used when the inferior is started.\n\
+Changing this setting does not have any effect on inferiors that are\n\
+already running."),
+ _("\
+Show the current working directory that is used when the inferior is started."),
+ _("\
+Use this command to change the current working directory that will be used\n\
+when the inferior is started. This setting does not affect GDB's current\n\
+working directory."),
+ set_cwd_command,
+ show_cwd_command,
+ &setlist, &showlist);
+ c = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ gdb_assert (c != NULL);
+ set_cmd_completer (c, filename_completer);
+
c = add_cmd ("environment", no_class, environment_info, _("\
The environment to give the program, or one variable's value.\n\
With an argument VAR, prints the value of environment variable VAR to\n\
add_com_alias ("fg", "cont", class_run, 1);
c = add_com ("run", class_run, run_command, _("\
-Start debugged program. You may specify arguments to give it.\n\
-Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n\
-Input and output redirection with \">\", \"<\", or \">>\" are also \
-allowed.\n\n\
-With no arguments, uses arguments last specified (with \"run\" \
-or \"set args\").\n\
-To cancel previous arguments and run with no arguments,\n\
-use \"set args\" without arguments."));
+Start debugged program.\n"
+RUN_ARGS_HELP));
set_cmd_completer (c, filename_completer);
add_com_alias ("r", "run", class_run, 1);
c = add_com ("start", class_run, start_command, _("\
-Run the debugged program until the beginning of the main procedure.\n\
-You may specify arguments to give to your program, just as with the\n\
-\"run\" command."));
+Start the debugged program stopping at the beginning of the main procedure.\n"
+RUN_ARGS_HELP));
+ set_cmd_completer (c, filename_completer);
+
+ c = add_com ("starti", class_run, starti_command, _("\
+Start the debugged program stopping at the first instruction.\n"
+RUN_ARGS_HELP));
set_cmd_completer (c, filename_completer);
add_com ("interrupt", class_run, interrupt_command,
otherwise all the threads in the program are stopped. To \n\
interrupt all running threads in non-stop mode, use the -a option."));
- c = add_info ("registers", nofp_registers_info, _("\
+ c = add_info ("registers", info_registers_command, _("\
List of integer registers and their contents, for selected stack frame.\n\
-Register name as argument means describe only that register."));
+One or more register names as argument means describe the given registers.\n\
+One or more register group names as argument means describe the registers\n\
+in the named register groups."));
add_info_alias ("r", "registers", 1);
set_cmd_completer (c, reg_or_group_completer);
- c = add_info ("all-registers", all_registers_info, _("\
+ c = add_info ("all-registers", info_all_registers_command, _("\
List of all registers and their contents, for selected stack frame.\n\
-Register name as argument means describe only that register."));
+One or more register names as argument means describe the given registers.\n\
+One or more register group names as argument means describe the registers\n\
+in the named register groups."));
set_cmd_completer (c, reg_or_group_completer);
- add_info ("program", program_info,
+ add_info ("program", info_program_command,
_("Execution status of the program."));
- add_info ("float", float_info,
+ add_info ("float", info_float_command,
_("Print the status of the floating point unit\n"));
- add_info ("vector", vector_info,
+ add_info ("vector", info_vector_command,
_("Print the status of the vector unit\n"));
add_prefix_cmd ("proc", class_info, info_proc_cmd,