Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
- 2008 Free Software Foundation, Inc.
+ 2008, 2009 Free Software Foundation, Inc.
This file is part of GDB.
static void float_info (char *, int);
-static void detach_command (char *, int);
-
static void disconnect_command (char *, int);
static void unset_environment_command (char *, int);
run_command_1 (char *args, int from_tty, int tbreak_at_main)
{
char *exec_file;
+ struct cleanup *old_chain;
+ ptid_t ptid;
dont_repeat ();
target_create_inferior (exec_file, get_inferior_args (),
environ_vector (inferior_environ), from_tty);
+ /* We're starting off a new process. When we get out of here, in
+ non-stop mode, finish the state of all threads of that process,
+ but leave other threads alone, as they may be stopped in internal
+ events --- the frontend shouldn't see them as stopped. In
+ all-stop, always finish the state of all threads, as we may be
+ resuming more than just the new process. */
+ if (non_stop)
+ ptid = pid_to_ptid (ptid_get_pid (inferior_ptid));
+ else
+ ptid = minus_one_ptid;
+ old_chain = make_cleanup (finish_thread_state_cleanup, &ptid);
+
/* Pass zero for FROM_TTY, because at this point the "run" command
has done its thing; now we are setting up the running program. */
post_create_inferior (¤t_target, 0);
/* Start the target running. */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
-}
+ /* Since there was no error, there's no need to finish the thread
+ states here. */
+ discard_cleanups (old_chain);
+}
static void
run_command (char *args, int from_tty)
make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
}
- /* In synchronous case, all is well, just use the regular for loop. */
+ /* In synchronous case, all is well; each step_once call will step once. */
if (!target_can_async_p ())
{
for (; count > 0; count--)
{
- struct thread_info *tp = inferior_thread ();
- clear_proceed_status ();
+ struct thread_info *tp;
+ step_once (skip_subroutines, single_inst, count, thread);
- frame = get_current_frame ();
- tp->step_frame_id = get_frame_id (frame);
-
- if (!single_inst)
- {
- find_pc_line_pc_range (stop_pc,
- &tp->step_range_start, &tp->step_range_end);
- if (tp->step_range_end == 0)
- {
- char *name;
- if (find_pc_partial_function (stop_pc, &name,
- &tp->step_range_start,
- &tp->step_range_end) == 0)
- error (_("Cannot find bounds of current function"));
-
- target_terminal_ours ();
- printf_filtered (_("\
-Single stepping until exit from function %s, \n\
-which has no line number information.\n"), name);
- }
- }
+ if (target_has_execution
+ && !ptid_equal (inferior_ptid, null_ptid))
+ tp = inferior_thread ();
else
+ tp = NULL;
+
+ if (!tp || !tp->stop_step || !tp->step_multi)
{
- /* Say we are stepping, but stop after one insn whatever it does. */
- tp->step_range_start = tp->step_range_end = 1;
- if (!skip_subroutines)
- /* It is stepi.
- Don't step over function calls, not even to functions lacking
- line numbers. */
- tp->step_over_calls = STEP_OVER_NONE;
+ /* If we stopped for some reason that is not stepping
+ there are no further steps to make. */
+ if (tp)
+ tp->step_multi = 0;
+ break;
}
-
- if (skip_subroutines)
- tp->step_over_calls = STEP_OVER_ALL;
-
- tp->step_multi = (count > 1);
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
-
- if (!target_has_execution
- || !inferior_thread ()->stop_step)
- break;
}
do_cleanups (cleanups);
- return;
}
- /* In case of asynchronous target things get complicated, do only
- one step for now, before returning control to the event loop. Let
- the continuation figure out how many other steps we need to do,
- and handle them one at the time, through step_once(). */
else
{
+ /* In the case of an asynchronous target things get complicated;
+ do only one step for now, before returning control to the
+ event loop. Let the continuation figure out how many other
+ steps we need to do, and handle them one at the time, through
+ step_once. */
step_once (skip_subroutines, single_inst, count, thread);
+
/* We are running, and the continuation is installed. It will
disable the longjmp breakpoint as appropriate. */
discard_cleanups (cleanups);
{
/* There are more steps to make, and we did stop due to
ending a stepping range. Do another step. */
- step_once (a->skip_subroutines, a->single_inst, a->count - 1, a->thread);
+ step_once (a->skip_subroutines, a->single_inst,
+ a->count - 1, a->thread);
return;
}
tp->step_multi = 0;
delete_longjmp_breakpoint (a->thread);
}
-/* Do just one step operation. If count >1 we will have to set up a
- continuation to be done after the target stops (after this one
- step). This is useful to implement the 'step n' kind of commands, in
- case of asynchronous targets. We had to split step_1 into two parts,
- one to be done before proceed() and one afterwards. This function is
- called in case of step n with n>1, after the first step operation has
- been completed.*/
-static void
+/* Do just one step operation. This is useful to implement the 'step
+ n' kind of commands. In case of asynchronous targets, we will have
+ to set up a continuation to be done after the target stops (after
+ this one step). For synch targets, the caller handles further
+ stepping. */
+
+static void
step_once (int skip_subroutines, int single_inst, int count, int thread)
{
struct frame_info *frame;
- struct step_1_continuation_args *args;
if (count > 0)
{
clear_proceed_status ();
frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
tp->step_frame_id = get_frame_id (frame);
if (!single_inst)
{
- find_pc_line_pc_range (stop_pc,
+ CORE_ADDR pc;
+
+ pc = get_frame_pc (frame);
+ find_pc_line_pc_range (pc,
&tp->step_range_start, &tp->step_range_end);
/* If we have no line info, switch to stepi mode. */
else if (tp->step_range_end == 0)
{
char *name;
- if (find_pc_partial_function (stop_pc, &name,
+ if (find_pc_partial_function (pc, &name,
&tp->step_range_start,
&tp->step_range_end) == 0)
error (_("Cannot find bounds of current function"));
tp->step_multi = (count > 1);
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
- args = xmalloc (sizeof (*args));
- args->skip_subroutines = skip_subroutines;
- args->single_inst = single_inst;
- args->count = count;
- args->thread = thread;
- add_intermediate_continuation (tp, step_1_continuation, args, xfree);
+ /* For async targets, register a continuation to do any
+ additional steps. For sync targets, the caller will handle
+ further stepping. */
+ if (target_can_async_p ())
+ {
+ struct step_1_continuation_args *args;
+
+ args = xmalloc (sizeof (*args));
+ args->skip_subroutines = skip_subroutines;
+ args->single_inst = single_inst;
+ args->count = count;
+ args->thread = thread;
+
+ add_intermediate_continuation (tp, step_1_continuation, args, xfree);
+ }
}
}
}
clear_proceed_status ();
- /* "signal 0" should not get stuck if we are stopped at a breakpoint.
- FIXME: Neither should "signal foo" but when I tried passing
- (CORE_ADDR)-1 unconditionally I got a testsuite failure which I haven't
- tried to track down yet. */
- proceed (oursig == TARGET_SIGNAL_0 ? (CORE_ADDR) -1 : stop_pc, oursig, 0);
+ proceed ((CORE_ADDR) -1, oursig, 0);
}
/* Proceed until we reach a different source line with pc greater than
than the current line (if in symbolic section) or pc (if
not). */
- pc = read_pc ();
+ pc = get_frame_pc (frame);
func = find_pc_function (pc);
if (!func)
struct thread_info *tp = inferior_thread ();
struct breakpoint *breakpoint;
struct cleanup *old_chain;
+ CORE_ADDR pc;
CORE_ADDR func_addr;
int back_up;
- if (find_pc_partial_function (get_frame_pc (get_current_frame ()),
- NULL, &func_addr, NULL) == 0)
+ pc = get_frame_pc (get_current_frame ());
+
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL) == 0)
internal_error (__FILE__, __LINE__,
_("Finish: couldn't find function."));
no way that a function up the stack can have a return address
that's equal to its entry point. */
- if (sal.pc != read_pc ())
+ if (sal.pc != pc)
{
/* Set breakpoint and continue. */
breakpoint =
stat = bpstat_num (&bs, &num);
target_files_info ();
- printf_filtered (_("Program stopped at %s.\n"),
- hex_string ((unsigned long) stop_pc));
+ printf_filtered (_("Program stopped at %s.\n"), paddress (stop_pc));
if (tp->stop_step)
printf_filtered (_("It stopped after being stepped.\n"));
else if (stat != 0)
char *exec_file;
char *full_exec_path = NULL;
int async_exec = 0;
+ struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
dont_repeat (); /* Not for the faint of heart */
{
/* Simulate synchronous execution */
async_disable_stdin ();
+ make_cleanup ((make_cleanup_ftype *)async_enable_stdin, NULL);
}
target_attach (args, from_tty);
a->args = xstrdup (args);
a->from_tty = from_tty;
a->async_exec = async_exec;
- add_continuation (inferior_thread (),
- attach_command_continuation, a,
- attach_command_continuation_free_args);
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+ discard_cleanups (back_to);
return;
}
}
attach_command_post_wait (args, from_tty, async_exec);
+ discard_cleanups (back_to);
}
/*
* started via the normal ptrace (PTRACE_TRACEME).
*/
-static void
+void
detach_command (char *args, int from_tty)
{
dont_repeat (); /* Not for the faint of heart. */
projects / deliverable / binutils-gdb.git / blobdiff