ptid_t inferior_ptid;
-/* Last signal that the inferior received (why it stopped). */
-
-enum target_signal stop_signal;
-
/* Address at which inferior stopped. */
CORE_ADDR stop_pc;
-/* Chain containing status of breakpoint(s) that we have stopped at. */
-
-bpstat stop_bpstat;
-
/* Flag indicating that a command has proceeded the inferior past the
current breakpoint. */
int breakpoint_proceeded;
-/* Nonzero if stopped due to a step command. */
-
-int stop_step;
-
/* Nonzero if stopped due to completion of a stack dummy routine. */
int stop_stack_dummy;
int stopped_by_random_signal;
-/* Range to single step within.
- If this is nonzero, respond to a single-step signal
- by continuing to step if the pc is in this range. */
-
-CORE_ADDR step_range_start; /* Inclusive */
-CORE_ADDR step_range_end; /* Exclusive */
-
-/* Stack frame address as of when stepping command was issued.
- This is how we know when we step into a subroutine call,
- and how to set the frame for the breakpoint used to step out. */
-
-struct frame_id step_frame_id;
-
-enum step_over_calls_kind step_over_calls;
-
-/* If stepping, nonzero means step count is > 1
- so don't print frame next time inferior stops
- if it stops due to stepping. */
-
-int step_multi;
-
/* Environment to use for running inferior,
in format described in environ.h. */
stopped at. */
if (args != NULL)
{
- bpstat bs = stop_bpstat;
+ bpstat bs = NULL;
int num, stat;
int stopped = 0;
+ struct thread_info *tp;
+
+ if (non_stop)
+ tp = find_thread_pid (inferior_ptid);
+ else
+ {
+ ptid_t last_ptid;
+ struct target_waitstatus ws;
+
+ get_last_target_status (&last_ptid, &ws);
+ tp = find_thread_pid (last_ptid);
+ }
+ if (tp != NULL)
+ bs = tp->stop_bpstat;
while ((stat = bpstat_num (&bs, &num)) != 0)
if (stat > 0)
{
for (; count > 0; count--)
{
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
+ tp->step_frame_id = get_frame_id (frame);
if (!single_inst)
{
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
- if (step_range_end == 0)
+ find_pc_line_pc_range (stop_pc,
+ &tp->step_range_start, &tp->step_range_end);
+ if (tp->step_range_end == 0)
{
char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
+ if (find_pc_partial_function (stop_pc, &name,
+ &tp->step_range_start,
+ &tp->step_range_end) == 0)
error (_("Cannot find bounds of current function"));
target_terminal_ours ();
else
{
/* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
if (!skip_subroutines)
/* It is stepi.
Don't step over function calls, not even to functions lacking
line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ tp->step_over_calls = STEP_OVER_NONE;
}
if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
+ tp->step_over_calls = STEP_OVER_ALL;
- step_multi = (count > 1);
+ tp->step_multi = (count > 1);
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
- if (!stop_step)
+ if (!target_has_execution
+ || !inferior_thread ()->stop_step)
break;
}
{
struct step_1_continuation_args *a = args;
- if (!step_multi || !stop_step)
+ if (target_has_execution)
{
- /* If we stopped for some reason that is not stepping there are
- no further steps to make. Cleanup. */
- if (!a->single_inst || a->skip_subroutines)
- delete_longjmp_breakpoint (a->thread);
- step_multi = 0;
+ struct thread_info *tp;
+
+ tp = inferior_thread ();
+ if (tp->step_multi && tp->stop_step)
+ {
+ /* There are more steps to make, and we did stop due to
+ ending a stepping range. Do another step. */
+ step_once (a->skip_subroutines, a->single_inst, a->count - 1, a->thread);
+ return;
+ }
+ tp->step_multi = 0;
}
- else
- step_once (a->skip_subroutines, a->single_inst, a->count - 1, a->thread);
+
+ /* We either stopped for some reason that is not stepping, or there
+ are no further steps to make. Cleanup. */
+ if (!a->single_inst || a->skip_subroutines)
+ delete_longjmp_breakpoint (a->thread);
}
/* Do just one step operation. If count >1 we will have to set up a
if (count > 0)
{
+ /* Don't assume THREAD is a valid thread id. It is set to -1 if
+ the longjmp breakpoint was not required. Use the
+ INFERIOR_PTID thread instead, which is the same thread when
+ THREAD is set. */
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
frame = get_current_frame ();
if (!frame) /* Avoid coredump here. Why tho? */
error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
+ tp->step_frame_id = get_frame_id (frame);
if (!single_inst)
{
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
+ find_pc_line_pc_range (stop_pc,
+ &tp->step_range_start, &tp->step_range_end);
/* If we have no line info, switch to stepi mode. */
- if (step_range_end == 0 && step_stop_if_no_debug)
+ if (tp->step_range_end == 0 && step_stop_if_no_debug)
{
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
}
- else if (step_range_end == 0)
+ else if (tp->step_range_end == 0)
{
char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
+ if (find_pc_partial_function (stop_pc, &name,
+ &tp->step_range_start,
+ &tp->step_range_end) == 0)
error (_("Cannot find bounds of current function"));
target_terminal_ours ();
else
{
/* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
if (!skip_subroutines)
/* It is stepi.
Don't step over function calls, not even to functions lacking
line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ tp->step_over_calls = STEP_OVER_NONE;
}
if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
+ tp->step_over_calls = STEP_OVER_ALL;
- step_multi = (count > 1);
+ inferior_thread ()->step_multi = (count > 1);
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
args = xmalloc (sizeof (*args));
CORE_ADDR pc;
struct symbol *func;
struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
if (msymbol == NULL)
error (_("Execution is not within a known function."));
- step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
- step_range_end = pc;
+ tp->step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
+ tp->step_range_end = pc;
}
else
{
sal = find_pc_line (pc, 0);
- step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
- step_range_end = sal.end;
+ tp->step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+ tp->step_range_end = sal.end;
}
- step_over_calls = STEP_OVER_ALL;
- step_frame_id = get_frame_id (frame);
+ tp->step_over_calls = STEP_OVER_ALL;
+ tp->step_frame_id = get_frame_id (frame);
- step_multi = 0; /* Only one call to proceed */
+ tp->step_multi = 0; /* Only one call to proceed */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
}
{
struct finish_command_continuation_args *a = arg;
- if (bpstat_find_breakpoint (stop_bpstat, a->breakpoint) != NULL
+ bpstat bs = NULL;
+
+ if (!ptid_equal (inferior_ptid, null_ptid)
+ && target_has_execution
+ && is_stopped (inferior_ptid))
+ bs = inferior_thread ()->stop_bpstat;
+
+ if (bpstat_find_breakpoint (bs, a->breakpoint) != NULL
&& a->function != NULL)
{
struct type *value_type;
next stop will be in the same thread that we started doing a
finish on. This suppressing (or some other replacement means)
should be a thread property. */
- observer_notify_normal_stop (stop_bpstat);
+ observer_notify_normal_stop (bs);
suppress_stop_observer = 0;
delete_breakpoint (a->breakpoint);
}
struct breakpoint *breakpoint;
struct cleanup *old_chain;
struct finish_command_continuation_args *cargs;
+ struct thread_info *tp;
int async_exec = 0;
if (frame == 0)
error (_("\"finish\" not meaningful in the outermost frame."));
+ tp = inferior_thread ();
+
clear_proceed_status ();
sal = find_pc_line (get_frame_pc (frame), 0);
print_stack_frame (get_selected_frame (NULL), 1, LOCATION);
}
- proceed_to_finish = 1; /* We want stop_registers, please... */
+ tp->proceed_to_finish = 1; /* We want stop_registers, please... */
make_cleanup_restore_integer (&suppress_stop_observer);
suppress_stop_observer = 1;
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
static void
program_info (char *args, int from_tty)
{
- bpstat bs = stop_bpstat;
- int num;
- int stat = bpstat_num (&bs, &num);
+ bpstat bs;
+ int num, stat;
+ struct thread_info *tp;
+ ptid_t ptid;
if (!target_has_execution)
{
return;
}
+ if (non_stop)
+ ptid = inferior_ptid;
+ else
+ {
+ struct target_waitstatus ws;
+ get_last_target_status (&ptid, &ws);
+ }
+
+ if (ptid_equal (ptid, null_ptid) || is_exited (ptid))
+ error (_("Invalid selected thread."));
+ else if (is_running (ptid))
+ error (_("Selected thread is running."));
+
+ tp = find_thread_pid (ptid);
+ bs = tp->stop_bpstat;
+ stat = bpstat_num (&bs, &num);
+
target_files_info ();
printf_filtered (_("Program stopped at %s.\n"),
hex_string ((unsigned long) stop_pc));
- if (stop_step)
+ if (tp->stop_step)
printf_filtered (_("It stopped after being stepped.\n"));
else if (stat != 0)
{
stat = bpstat_num (&bs, &num);
}
}
- else if (stop_signal != TARGET_SIGNAL_0)
+ else if (tp->stop_signal != TARGET_SIGNAL_0)
{
printf_filtered (_("It stopped with signal %s, %s.\n"),
- target_signal_to_name (stop_signal),
- target_signal_to_string (stop_signal));
+ target_signal_to_name (tp->stop_signal),
+ target_signal_to_string (tp->stop_signal));
}
if (!from_tty)
projects / deliverable / binutils-gdb.git / blobdiff