#include "continuations.h"
#include "linespec.h"
#include "cli/cli-utils.h"
+#include "infcall.h"
/* Local functions: */
static void nofp_registers_info (char *, int);
-static void print_return_value (struct value *function,
- struct type *value_type);
-
static void until_next_command (int);
static void until_command (char *, int);
static void run_command (char *, int);
-static void run_no_args_command (char *args, int from_tty);
-
-static void go_command (char *line_no, int from_tty);
-
void _initialize_infcmd (void);
#define ERROR_NO_INFERIOR \
void
post_create_inferior (struct target_ops *target, int from_tty)
{
- volatile struct gdb_exception ex;
/* Be sure we own the terminal in case write operations are performed. */
target_terminal_ours ();
if the PC is unavailable (e.g., we're opening a core file with
missing registers info), ignore it. */
stop_pc = 0;
- TRY_CATCH (ex, RETURN_MASK_ERROR)
+ TRY
{
stop_pc = regcache_read_pc (get_current_regcache ());
}
- if (ex.reason < 0 && ex.error != NOT_AVAILABLE_ERROR)
- throw_exception (ex);
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ if (ex.error != NOT_AVAILABLE_ERROR)
+ throw_exception (ex);
+ }
+ END_CATCH
if (exec_bfd)
{
if (background && !target->to_can_async_p (target))
error (_("Asynchronous execution not supported on this target."));
- /* If we don't get a request of running in the bg, then we need
- to simulate synchronous (fg) execution. */
- if (!background && target->to_can_async_p (target))
+ if (!background)
{
- /* Simulate synchronous execution. Note no cleanup is necessary
- for this. stdin is re-enabled whenever an error reaches the
- top level. */
+ /* If we get a request for running in the fg, then we need to
+ simulate synchronous (fg) execution. Note no cleanup is
+ necessary for this. stdin is re-enabled whenever an error
+ reaches the top level. */
async_disable_stdin ();
}
}
/* Start the target running. Do not use -1 continuation as it would skip
breakpoint right at the entry point. */
- proceed (regcache_read_pc (get_current_regcache ()), GDB_SIGNAL_0, 0);
+ proceed (regcache_read_pc (get_current_regcache ()), GDB_SIGNAL_0);
/* Since there was no error, there's no need to finish the thread
states here. */
run_command_1 (args, from_tty, 0);
}
-static void
-run_no_args_command (char *args, int from_tty)
-{
- set_inferior_args ("");
-}
-\f
-
/* Start the execution of the program up until the beginning of the main
program. */
switch_to_thread (thread->ptid);
clear_proceed_status (0);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
return 0;
}
ensure_valid_thread ();
ensure_not_running ();
clear_proceed_status (0);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
}
if (args != NULL)
{
- if (strncmp (args, "-a", sizeof ("-a") - 1) == 0)
+ if (startswith (args, "-a"))
{
all_threads = 1;
args += sizeof ("-a") - 1;
set_step_frame (void)
{
struct symtab_and_line sal;
+ CORE_ADDR pc;
+ struct frame_info *frame = get_current_frame ();
+ struct thread_info *tp = inferior_thread ();
- find_frame_sal (get_current_frame (), &sal);
- set_step_info (get_current_frame (), sal);
+ find_frame_sal (frame, &sal);
+ set_step_info (frame, sal);
+ pc = get_frame_pc (frame);
+ tp->control.step_start_function = find_pc_function (pc);
}
/* Step until outside of current statement. */
make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
}
- /* In synchronous case, all is well; each step_once call will step once. */
- if (!target_can_async_p ())
- {
- for (; count > 0; count--)
- {
- step_once (skip_subroutines, single_inst, count, thread);
-
- if (!target_has_execution)
- break;
- else
- {
- struct thread_info *tp = inferior_thread ();
-
- if (!tp->control.stop_step || !tp->step_multi)
- {
- /* If we stopped for some reason that is not stepping
- there are no further steps to make. */
- tp->step_multi = 0;
- break;
- }
- }
- }
+ /* Do only one step for now, before returning control to the event
+ loop. Let the continuation figure out how many other steps we
+ need to do, and handle them one at the time, through
+ step_once. */
+ step_once (skip_subroutines, single_inst, count, thread);
- do_cleanups (cleanups);
- }
- else
- {
- /* In the case of an asynchronous target things get complicated;
- do only one step for now, before returning control to the
- event loop. Let the continuation figure out how many other
- steps we need to do, and handle them one at the time, through
- step_once. */
- step_once (skip_subroutines, single_inst, count, thread);
-
- /* We are running, and the continuation is installed. It will
- disable the longjmp breakpoint as appropriate. */
- discard_cleanups (cleanups);
- }
+ /* We are running, and the continuation is installed. It will
+ disable the longjmp breakpoint as appropriate. */
+ discard_cleanups (cleanups);
}
struct step_1_continuation_args
if (count > 0)
{
+ struct step_1_continuation_args *args;
/* Don't assume THREAD is a valid thread id. It is set to -1 if
the longjmp breakpoint was not required. Use the
INFERIOR_PTID thread instead, which is the same thread when
THREAD is set. */
struct thread_info *tp = inferior_thread ();
- clear_proceed_status (!skip_subroutines);
+ clear_proceed_status (1);
set_step_frame ();
if (!single_inst)
tp->control.step_over_calls = STEP_OVER_ALL;
tp->step_multi = (count > 1);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 1);
-
- /* For async targets, register a continuation to do any
- additional steps. For sync targets, the caller will handle
- further stepping. */
- if (target_can_async_p ())
- {
- struct step_1_continuation_args *args;
+ tp->control.stepping_command = 1;
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
- args = xmalloc (sizeof (*args));
- args->skip_subroutines = skip_subroutines;
- args->single_inst = single_inst;
- args->count = count;
- args->thread = thread;
+ /* Register a continuation to do any additional steps. */
+ args = XNEW (struct step_1_continuation_args);
+ args = xmalloc (sizeof (*args));
+ args->skip_subroutines = skip_subroutines;
+ args->single_inst = single_inst;
+ args->count = count;
+ args->thread = thread;
- add_intermediate_continuation (tp, step_1_continuation, args, xfree);
- }
+ add_intermediate_continuation (tp, step_1_continuation, args, xfree);
}
}
}
clear_proceed_status (0);
- proceed (addr, GDB_SIGNAL_0, 0);
+ proceed (addr, GDB_SIGNAL_0);
}
\f
-
-/* Go to line or address in current procedure. */
-
-static void
-go_command (char *line_no, int from_tty)
-{
- if (line_no == (char *) NULL || !*line_no)
- printf_filtered (_("Usage: go <location>\n"));
- else
- {
- tbreak_command (line_no, from_tty);
- jump_command (line_no, from_tty);
- }
-}
-\f
-
/* Continue program giving it specified signal. */
static void
oursig = gdb_signal_from_command (num);
}
+ do_cleanups (args_chain);
+
/* Look for threads other than the current that this command ends up
resuming too (due to schedlock off), and warn if they'll get a
signal delivered. "signal 0" is used to suppress a previous
}
clear_proceed_status (0);
- proceed ((CORE_ADDR) -1, oursig, 0);
+ proceed ((CORE_ADDR) -1, oursig);
}
/* Queue a signal to be delivered to the current thread. */
set_longjmp_breakpoint (tp, get_frame_id (frame));
old_chain = make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 1);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
- if (target_can_async_p () && is_running (inferior_ptid))
+ if (is_running (inferior_ptid))
{
struct until_next_continuation_args *cont_args;
}
\f
/* Return the value of the result of a function at the end of a 'finish'
- command/BP. */
+ command/BP. DTOR_DATA (if not NULL) can represent inferior registers
+ right after an inferior call has finished. */
struct value *
-get_return_value (struct value *function, struct type *value_type)
+get_return_value (struct value *function, struct type *value_type,
+ struct dummy_frame_context_saver *ctx_saver)
{
- struct regcache *stop_regs = stop_registers;
+ struct regcache *stop_regs = NULL;
struct gdbarch *gdbarch;
struct value *value;
struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
- /* If stop_registers were not saved, use the current registers. */
- if (!stop_regs)
+ /* If registers were not saved, use the current registers. */
+ if (ctx_saver != NULL)
+ stop_regs = dummy_frame_context_saver_get_regs (ctx_saver);
+ else
{
stop_regs = regcache_dup (get_current_regcache ());
make_cleanup_regcache_xfree (stop_regs);
gdbarch = get_regcache_arch (stop_regs);
- CHECK_TYPEDEF (value_type);
+ value_type = check_typedef (value_type);
gdb_assert (TYPE_CODE (value_type) != TYPE_CODE_VOID);
/* FIXME: 2003-09-27: When returning from a nested inferior function
return value;
}
-/* Print the result of a function at the end of a 'finish' command. */
+/* Print the result of a function at the end of a 'finish' command.
+ DTOR_DATA (if not NULL) can represent inferior registers right after
+ an inferior call has finished. */
static void
-print_return_value (struct value *function, struct type *value_type)
+print_return_value (struct value *function, struct type *value_type,
+ struct dummy_frame_context_saver *ctx_saver)
{
- struct value *value = get_return_value (function, value_type);
+ struct value *value = get_return_value (function, value_type, ctx_saver);
struct ui_out *uiout = current_uiout;
if (value)
}
else
{
+ struct cleanup *oldchain;
+ char *type_name;
+
+ type_name = type_to_string (value_type);
+ oldchain = make_cleanup (xfree, type_name);
ui_out_text (uiout, "Value returned has type: ");
- ui_out_field_string (uiout, "return-type", TYPE_NAME (value_type));
+ ui_out_field_string (uiout, "return-type", type_name);
ui_out_text (uiout, ".");
ui_out_text (uiout, " Cannot determine contents\n");
+ do_cleanups (oldchain);
}
}
int thread;
struct breakpoint *breakpoint;
struct symbol *function;
+
+ /* Inferior registers stored right before dummy_frame has been freed
+ after an inferior call. It can be NULL if no inferior call was
+ involved, GDB will then use current inferior registers. */
+ struct dummy_frame_context_saver *ctx_saver;
};
static void
if (TYPE_CODE (value_type) != TYPE_CODE_VOID)
{
- volatile struct gdb_exception ex;
struct value *func;
- func = read_var_value (a->function, get_current_frame ());
- TRY_CATCH (ex, RETURN_MASK_ALL)
+ func = read_var_value (a->function, NULL, get_current_frame ());
+ TRY
{
/* print_return_value can throw an exception in some
circumstances. We need to catch this so that we still
delete the breakpoint. */
- print_return_value (func, value_type);
+ print_return_value (func, value_type, a->ctx_saver);
+ }
+ CATCH (ex, RETURN_MASK_ALL)
+ {
+ exception_print (gdb_stdout, ex);
}
- if (ex.reason < 0)
- exception_print (gdb_stdout, ex);
+ END_CATCH
}
}
static void
finish_command_continuation_free_arg (void *arg)
{
- xfree (arg);
+ struct finish_command_continuation_args *cargs = arg;
+
+ if (cargs->ctx_saver != NULL)
+ dummy_frame_context_saver_drop (cargs->ctx_saver);
+ xfree (cargs);
}
/* finish_backward -- helper function for finish_command. */
insert_step_resume_breakpoint_at_sal (gdbarch,
sr_sal, null_frame_id);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
else
{
/* We're almost there -- we just need to back up by one more
single-step. */
tp->control.step_range_start = tp->control.step_range_end = 1;
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 1);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
}
struct symtab_and_line sal;
struct thread_info *tp = inferior_thread ();
struct breakpoint *breakpoint;
- struct cleanup *old_chain;
+ struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
struct finish_command_continuation_args *cargs;
int thread = tp->num;
+ struct dummy_frame_context_saver *saver = NULL;
sal = find_pc_line (get_frame_pc (frame), 0);
sal.pc = get_frame_pc (frame);
+ if (get_frame_type (frame) == DUMMY_FRAME)
+ {
+ saver = dummy_frame_context_saver_setup (get_stack_frame_id (frame),
+ inferior_ptid);
+ make_cleanup (dummy_frame_context_saver_cleanup, saver);
+ }
+
breakpoint = set_momentary_breakpoint (gdbarch, sal,
get_stack_frame_id (frame),
bp_finish);
/* set_momentary_breakpoint invalidates FRAME. */
frame = NULL;
- old_chain = make_cleanup_delete_breakpoint (breakpoint);
+ make_cleanup_delete_breakpoint (breakpoint);
set_longjmp_breakpoint (tp, frame_id);
make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
- /* We want stop_registers, please... */
+ /* We want to print return value, please... */
tp->control.proceed_to_finish = 1;
- cargs = xmalloc (sizeof (*cargs));
+ cargs = XNEW (struct finish_command_continuation_args);
cargs->thread = thread;
cargs->breakpoint = breakpoint;
cargs->function = function;
+ cargs->ctx_saver = saver;
add_continuation (tp, finish_command_continuation, cargs,
finish_command_continuation_free_arg);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
discard_cleanups (old_chain);
- if (!target_can_async_p ())
- do_all_continuations (0);
}
/* "finish": Set a temporary breakpoint at the place the selected
print_stack_frame (get_selected_frame (NULL), 1, LOCATION, 0);
}
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 1);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
return;
}
{
switch_to_thread (thread->ptid);
clear_proceed_status (0);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
return 0;
static void
attach_command_post_wait (char *args, int from_tty, int async_exec)
{
- char *exec_file;
- char *full_exec_path = NULL;
struct inferior *inferior;
inferior = current_inferior ();
/* If no exec file is yet known, try to determine it from the
process itself. */
- exec_file = (char *) get_exec_file (0);
- if (!exec_file)
- {
- exec_file = target_pid_to_exec_file (ptid_get_pid (inferior_ptid));
- if (exec_file)
- {
- /* It's possible we don't have a full path, but rather just a
- filename. Some targets, such as HP-UX, don't provide the
- full path, sigh.
-
- Attempt to qualify the filename against the source path.
- (If that fails, we'll just fall back on the original
- filename. Not much more we can do...) */
-
- if (!source_full_path_of (exec_file, &full_exec_path))
- full_exec_path = xstrdup (exec_file);
-
- exec_file_attach (full_exec_path, from_tty);
- symbol_file_add_main (full_exec_path, from_tty);
- }
- }
+ if (get_exec_file (0) == NULL)
+ exec_file_locate_attach (ptid_get_pid (inferior_ptid), from_tty);
else
{
reopen_exec_file ();
if (inferior_thread ()->suspend.stop_signal == GDB_SIGNAL_0)
{
clear_proceed_status (0);
- proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
+ proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
}
}
}
/* The user requested a plain `attach', so be sure to leave
the inferior stopped. */
- if (target_can_async_p ())
- async_enable_stdin ();
+ async_enable_stdin ();
/* At least the current thread is already stopped. */
selected thread is stopped, others may still be executing.
Be sure to explicitly stop all threads of the process. This
should have no effect on already stopped threads. */
- if (non_stop)
+ if (target_is_non_stop_p ())
target_stop (pid_to_ptid (inferior->pid));
/* Tell the user/frontend where we're stopped. */
shouldn't refer to attach_target again. */
attach_target = NULL;
- /* Done with ARGS. */
- do_cleanups (args_chain);
-
/* Set up the "saved terminal modes" of the inferior
based on what modes we are starting it with. */
target_terminal_init ();
init_wait_for_inferior ();
clear_proceed_status (0);
- if (non_stop)
+ if (target_is_non_stop_p ())
{
/* If we find that the current thread isn't stopped, explicitly
do so now, because we're going to install breakpoints and
E.g. Mach 3 or GNU hurd. */
if (!target_attach_no_wait)
{
+ struct attach_command_continuation_args *a;
struct inferior *inferior = current_inferior ();
/* Careful here. See comments in inferior.h. Basically some
STOP_QUIETLY_NO_SIGSTOP is for. */
inferior->control.stop_soon = STOP_QUIETLY_NO_SIGSTOP;
- if (target_can_async_p ())
- {
- /* sync_execution mode. Wait for stop. */
- struct attach_command_continuation_args *a;
-
- a = xmalloc (sizeof (*a));
- a->args = xstrdup (args);
- a->from_tty = from_tty;
- a->async_exec = async_exec;
- add_inferior_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
- return;
- }
-
- wait_for_inferior ();
+ /* sync_execution mode. Wait for stop. */
+ a = XNEW (struct attach_command_continuation_args);
+ a->args = xstrdup (args);
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+ /* Done with ARGS. */
+ do_cleanups (args_chain);
+
+ if (!target_is_async_p ())
+ mark_infrun_async_event_handler ();
+ return;
}
+ /* Done with ARGS. */
+ do_cleanups (args_chain);
+
attach_command_post_wait (args, from_tty, async_exec);
}
if (is_executing (inferior_ptid))
{
+ struct attach_command_continuation_args *a;
struct inferior *inferior = current_inferior ();
/* We're going to install breakpoints, and poke at memory,
inferior->control.stop_soon = STOP_QUIETLY_REMOTE;
/* Wait for stop before proceeding. */
- if (target_can_async_p ())
- {
- struct attach_command_continuation_args *a;
-
- a = xmalloc (sizeof (*a));
- a->args = xstrdup ("");
- a->from_tty = from_tty;
- a->async_exec = async_exec;
- add_inferior_continuation (attach_command_continuation, a,
- attach_command_continuation_free_args);
+ a = XNEW (struct attach_command_continuation_args);
+ a->args = xstrdup ("");
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
- do_cleanups (old_chain);
- return;
- }
- else
- wait_for_inferior ();
+ do_cleanups (old_chain);
+ return;
}
async_exec = leave_running;
ptid = minus_one_ptid;
else
ptid = inferior_ptid;
- target_stop (ptid);
+ target_interrupt (ptid);
/* Tag the thread as having been explicitly requested to stop, so
other parts of gdb know not to resume this thread automatically,
dont_repeat (); /* Not for the faint of heart. */
if (args != NULL
- && strncmp (args, "-a", sizeof ("-a") - 1) == 0)
+ && startswith (args, "-a"))
all_threads = 1;
if (!non_stop && all_threads)
this command does not enter the subroutine, but instead steps over\n\
the call, in effect treating it as a single source line."));
add_com_alias ("n", "next", class_run, 1);
- if (xdb_commands)
- add_com_alias ("S", "next", class_run, 1);
add_com ("step", class_run, step_command, _("\
Step program until it reaches a different source line.\n\
set_cmd_completer (c, location_completer);
add_com_alias ("j", "jump", class_run, 1);
- if (xdb_commands)
- {
- c = add_com ("go", class_run, go_command, _("\
-Usage: go <location>\n\
-Continue program being debugged, stopping at specified line or \n\
-address.\n\
-Give as argument either LINENUM or *ADDR, where ADDR is an \n\
-expression for an address to start at.\n\
-This command is a combination of tbreak and jump."));
- set_cmd_completer (c, location_completer);
- }
-
- if (xdb_commands)
- add_com_alias ("g", "go", class_run, 1);
-
add_com ("continue", class_run, continue_command, _("\
Continue program being debugged, after signal or breakpoint.\n\
Usage: continue [N]\n\
use \"set args\" without arguments."));
set_cmd_completer (c, filename_completer);
add_com_alias ("r", "run", class_run, 1);
- if (xdb_commands)
- add_com ("R", class_run, run_no_args_command,
- _("Start debugged program with no arguments."));
c = add_com ("start", class_run, start_command, _("\
Run the debugged program until the beginning of the main procedure.\n\
add_info_alias ("r", "registers", 1);
set_cmd_completer (c, reg_or_group_completer);
- if (xdb_commands)
- {
- c = add_com ("lr", class_info, nofp_registers_info, _("\
-List of integer registers and their contents, for selected stack frame.\n\
-Register name as argument means describe only that register."));
- set_cmd_completer (c, reg_or_group_completer);
- }
-
c = add_info ("all-registers", all_registers_info, _("\
List of all registers and their contents, for selected stack frame.\n\
Register name as argument means describe only that register."));
projects / deliverable / binutils-gdb.git / blobdiff