/* Low level interface to ptrace, for GDB when running under Unix.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "frame.h"
#include "terminal.h"
#include "target.h"
#include "gdbthread.h"
+#include "observer.h"
#include "gdb_string.h"
#include <signal.h>
#include <fcntl.h>
-#ifdef HAVE_SYS_SELECT_H
-#include <sys/select.h>
-#endif
-
-#ifdef HAVE_TERMIOS
-#define PROCESS_GROUP_TYPE pid_t
-#endif
+#include "gdb_select.h"
-#ifdef HAVE_TERMIO
-#define PROCESS_GROUP_TYPE int
-#endif
-
-#ifdef HAVE_SGTTY
-#ifdef SHORT_PGRP
-/* This is only used for the ultra. Does it have pid_t? */
-#define PROCESS_GROUP_TYPE short
-#else
-#define PROCESS_GROUP_TYPE int
-#endif
-#endif /* sgtty */
+#include "inflow.h"
#ifdef HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#endif
+#ifndef O_NOCTTY
+#define O_NOCTTY 0
+#endif
+
#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
static void handle_sigio (int);
#endif
static void pass_signal (int);
-static void kill_command (char *, int);
-
static void terminal_ours_1 (int);
\f
/* Record terminal status separately for debugger and inferior. */
-static serial_t stdin_serial;
+static struct serial *stdin_serial;
+
+/* Terminal related info we need to keep track of. Each inferior
+ holds an instance of this structure --- we save it whenever the
+ corresponding inferior stops, and restore it to the foreground
+ inferior when it resumes. */
+struct terminal_info
+{
+ /* The name of the tty (from the `tty' command) that we gave to the
+ inferior when it was started. */
+ char *run_terminal;
+
+ /* TTY state. We save it whenever the inferior stops, and restore
+ it when it resumes. */
+ serial_ttystate ttystate;
-/* TTY state for the inferior. We save it whenever the inferior stops, and
- restore it when it resumes. */
-static serial_ttystate inferior_ttystate;
+#ifdef PROCESS_GROUP_TYPE
+ /* Process group. Saved and restored just like ttystate. */
+ PROCESS_GROUP_TYPE process_group;
+#endif
-/* Our own tty state, which we restore every time we need to deal with the
- terminal. We only set it once, when GDB first starts. The settings of
- flags which readline saves and restores and unimportant. */
-static serial_ttystate our_ttystate;
+ /* fcntl flags. Saved and restored just like ttystate. */
+ int tflags;
+};
-/* fcntl flags for us and the inferior. Saved and restored just like
- {our,inferior}_ttystate. */
-static int tflags_inferior;
-static int tflags_ours;
+/* Our own tty state, which we restore every time we need to deal with
+ the terminal. This is only set once, when GDB first starts. The
+ settings of flags which readline saves and restores and
+ unimportant. */
+static struct terminal_info our_terminal_info;
#ifdef PROCESS_GROUP_TYPE
-/* Process group for us and the inferior. Saved and restored just like
- {our,inferior}_ttystate. */
-PROCESS_GROUP_TYPE our_process_group;
-PROCESS_GROUP_TYPE inferior_process_group;
+
+/* Return the process group of the current inferior. */
+
+PROCESS_GROUP_TYPE
+inferior_process_group (void)
+{
+ return current_inferior ()->terminal_info->process_group;
+}
#endif
/* While the inferior is running, we want SIGINT and SIGQUIT to go to the
static void (*sigint_ours) ();
static void (*sigquit_ours) ();
-/* The name of the tty (from the `tty' command) that we gave to the inferior
- when it was last started. */
-
-static char *inferior_thisrun_terminal;
+/* The name of the tty (from the `tty' command) that we're giving to
+ the inferior when starting it up. This is only (and should only
+ be) used as a transient global by new_tty_prefork,
+ create_tty_session, new_tty and new_tty_postfork, all called from
+ fork_inferior, while forking a new child. */
+static const char *inferior_thisrun_terminal;
/* Nonzero if our terminal settings are in effect. Zero if the
inferior's settings are in effect. Ignored if !gdb_has_a_terminal
int terminal_is_ours;
+#ifdef PROCESS_GROUP_TYPE
+static PROCESS_GROUP_TYPE
+gdb_getpgrp (void)
+{
+ int process_group = -1;
+#ifdef HAVE_TERMIOS
+ process_group = tcgetpgrp (0);
+#endif
+#ifdef HAVE_TERMIO
+ process_group = getpgrp ();
+#endif
+#ifdef HAVE_SGTTY
+ ioctl (0, TIOCGPGRP, &process_group);
+#endif
+ return process_group;
+}
+#endif
+
enum
{
yes, no, have_not_checked
case no:
return 0;
case have_not_checked:
- /* Get all the current tty settings (including whether we have a tty at
- all!). Can't do this in _initialize_inflow because SERIAL_FDOPEN
- won't work until the serial_ops_list is initialized. */
+ /* Get all the current tty settings (including whether we have a
+ tty at all!). Can't do this in _initialize_inflow because
+ serial_fdopen() won't work until the serial_ops_list is
+ initialized. */
#ifdef F_GETFL
- tflags_ours = fcntl (0, F_GETFL, 0);
+ our_terminal_info.tflags = fcntl (0, F_GETFL, 0);
#endif
gdb_has_a_terminal_flag = no;
- stdin_serial = SERIAL_FDOPEN (0);
if (stdin_serial != NULL)
{
- our_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
+ our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
- if (our_ttystate != NULL)
+ if (our_terminal_info.ttystate != NULL)
{
gdb_has_a_terminal_flag = yes;
-#ifdef HAVE_TERMIOS
- our_process_group = tcgetpgrp (0);
-#endif
-#ifdef HAVE_TERMIO
- our_process_group = getpgrp ();
-#endif
-#ifdef HAVE_SGTTY
- ioctl (0, TIOCGPGRP, &our_process_group);
+#ifdef PROCESS_GROUP_TYPE
+ our_terminal_info.process_group = gdb_getpgrp ();
#endif
}
}
#define OOPSY(what) \
if (result == -1) \
fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \
- what, strerror (errno))
+ what, safe_strerror (errno))
static void terminal_ours_1 (int);
{
if (gdb_has_a_terminal ())
{
- /* We could just as well copy our_ttystate (if we felt like adding
- a new function SERIAL_COPY_TTY_STATE). */
- if (inferior_ttystate)
- xfree (inferior_ttystate);
- inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
+ struct inferior *inf = current_inferior ();
+
+ /* We could just as well copy our_ttystate (if we felt like
+ adding a new function serial_copy_tty_state()). */
+ xfree (inf->terminal_info->ttystate);
+ inf->terminal_info->ttystate
+ = serial_get_tty_state (stdin_serial);
#ifdef PROCESS_GROUP_TYPE
- inferior_process_group = pgrp;
+ inf->terminal_info->process_group = pgrp;
#endif
/* Make sure that next time we call terminal_inferior (which will be
}
}
+/* Save the terminal settings again. This is necessary for the TUI
+ when it switches to TUI or non-TUI mode; curses changes the terminal
+ and gdb must be able to restore it correctly. */
+
+void
+terminal_save_ours (void)
+{
+ if (gdb_has_a_terminal ())
+ {
+ /* We could just as well copy our_ttystate (if we felt like adding
+ a new function serial_copy_tty_state). */
+ xfree (our_terminal_info.ttystate);
+ our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
+ }
+}
+
void
terminal_init_inferior (void)
{
void
terminal_inferior (void)
{
- if (gdb_has_a_terminal () && terminal_is_ours
- && inferior_thisrun_terminal == 0)
+ struct inferior *inf;
+
+ if (!terminal_is_ours)
+ return;
+
+ inf = current_inferior ();
+
+ if (gdb_has_a_terminal ()
+ && inf->terminal_info->ttystate != NULL
+ && inf->terminal_info->run_terminal == NULL)
{
int result;
/* Is there a reason this is being done twice? It happens both
places we use F_SETFL, so I'm inclined to think perhaps there
is some reason, however perverse. Perhaps not though... */
- result = fcntl (0, F_SETFL, tflags_inferior);
- result = fcntl (0, F_SETFL, tflags_inferior);
+ result = fcntl (0, F_SETFL, inf->terminal_info->tflags);
+ result = fcntl (0, F_SETFL, inf->terminal_info->tflags);
OOPSY ("fcntl F_SETFL");
#endif
/* Because we were careful to not change in or out of raw mode in
terminal_ours, we will not change in our out of raw mode with
this call, so we don't flush any input. */
- result = SERIAL_SET_TTY_STATE (stdin_serial, inferior_ttystate);
+ result = serial_set_tty_state (stdin_serial,
+ inf->terminal_info->ttystate);
OOPSY ("setting tty state");
if (!job_control)
if (job_control)
{
#ifdef HAVE_TERMIOS
- result = tcsetpgrp (0, inferior_process_group);
- if (!attach_flag)
+ result = tcsetpgrp (0, inf->terminal_info->process_group);
+ if (!inf->attach_flag)
OOPSY ("tcsetpgrp");
#endif
#ifdef HAVE_SGTTY
- result = ioctl (0, TIOCSPGRP, &inferior_process_group);
- if (!attach_flag)
+ result = ioctl (0, TIOCSPGRP, &inf->terminal_info->process_group);
+ if (!inf->attach_flag)
OOPSY ("TIOCSPGRP");
#endif
}
static void
terminal_ours_1 (int output_only)
{
- /* Checking inferior_thisrun_terminal is necessary so that
+ struct inferior *inf;
+
+ if (terminal_is_ours)
+ return;
+
+ terminal_is_ours = 1;
+
+ /* Checking inferior->run_terminal is necessary so that
if GDB is running in the background, it won't block trying
to do the ioctl()'s below. Checking gdb_has_a_terminal
avoids attempting all the ioctl's when running in batch. */
- if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0)
+
+ inf = current_inferior ();
+
+ if (inf->terminal_info->run_terminal != NULL || gdb_has_a_terminal () == 0)
return;
- if (!terminal_is_ours)
{
#ifdef SIGTTOU
/* Ignore this signal since it will happen when we try to set the
#endif
int result;
- terminal_is_ours = 1;
-
#ifdef SIGTTOU
if (job_control)
osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN);
#endif
- if (inferior_ttystate)
- xfree (inferior_ttystate);
- inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
-#ifdef HAVE_TERMIOS
- inferior_process_group = tcgetpgrp (0);
-#endif
-#ifdef HAVE_TERMIO
- inferior_process_group = getpgrp ();
-#endif
-#ifdef HAVE_SGTTY
- ioctl (0, TIOCGPGRP, &inferior_process_group);
+ xfree (inf->terminal_info->ttystate);
+ inf->terminal_info->ttystate = serial_get_tty_state (stdin_serial);
+
+#ifdef PROCESS_GROUP_TYPE
+ if (!inf->attach_flag)
+ /* If setpgrp failed in terminal_inferior, this would give us
+ our process group instead of the inferior's. See
+ terminal_inferior for details. */
+ inf->terminal_info->process_group = gdb_getpgrp ();
#endif
/* Here we used to set ICANON in our ttystate, but I believe this
though, since readline will deal with raw mode when/if it needs to.
*/
- SERIAL_NOFLUSH_SET_TTY_STATE (stdin_serial, our_ttystate,
- inferior_ttystate);
+ serial_noflush_set_tty_state (stdin_serial, our_terminal_info.ttystate,
+ inf->terminal_info->ttystate);
if (job_control)
{
#ifdef HAVE_TERMIOS
- result = tcsetpgrp (0, our_process_group);
+ result = tcsetpgrp (0, our_terminal_info.process_group);
#if 0
/* This fails on Ultrix with EINVAL if you run the testsuite
in the background with nohup, and then log out. GDB never
such situations as well. */
if (result == -1)
fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n",
- strerror (errno));
+ safe_strerror (errno));
#endif
#endif /* termios */
#ifdef HAVE_SGTTY
- result = ioctl (0, TIOCSPGRP, &our_process_group);
+ result = ioctl (0, TIOCSPGRP, &our_terminal_info.process_group);
#endif
}
}
#ifdef F_GETFL
- tflags_inferior = fcntl (0, F_GETFL, 0);
+ inf->terminal_info->tflags = fcntl (0, F_GETFL, 0);
/* Is there a reason this is being done twice? It happens both
places we use F_SETFL, so I'm inclined to think perhaps there
is some reason, however perverse. Perhaps not though... */
- result = fcntl (0, F_SETFL, tflags_ours);
- result = fcntl (0, F_SETFL, tflags_ours);
+ result = fcntl (0, F_SETFL, our_terminal_info.tflags);
+ result = fcntl (0, F_SETFL, our_terminal_info.tflags);
#endif
-
- result = result; /* lint */
}
}
-/* ARGSUSED */
+/* This is a "new_inferior" observer. It's business is to allocate
+ the TERMINAL_INFO member of the inferior structure. This field is
+ private to inflow.c, and its type is opaque to the rest of GDB.
+ PID is the target pid of the inferior that has just been added to
+ the inferior list. */
+
+static void
+inflow_new_inferior (int pid)
+{
+ struct inferior *inf = find_inferior_pid (pid);
+
+ inf->terminal_info = XZALLOC (struct terminal_info);
+}
+
+/* This is a "inferior_exit" observer. Releases the TERMINAL_INFO member
+ of the inferior structure. This field is private to inflow.c, and
+ its type is opaque to the rest of GDB. PID is the target pid of
+ the inferior that is about to be removed from the inferior
+ list. */
+
+static void
+inflow_inferior_exit (int pid)
+{
+ struct inferior *inf = find_inferior_pid (pid);
+
+ xfree (inf->terminal_info->run_terminal);
+ xfree (inf->terminal_info);
+ inf->terminal_info = NULL;
+}
+
+void
+copy_terminal_info (struct inferior *to, struct inferior *from)
+{
+ *to->terminal_info = *from->terminal_info;
+ if (from->terminal_info->run_terminal)
+ to->terminal_info->run_terminal
+ = xstrdup (from->terminal_info->run_terminal);
+}
+
void
term_info (char *arg, int from_tty)
{
target_terminal_info (arg, from_tty);
}
-/* ARGSUSED */
void
child_terminal_info (char *args, int from_tty)
{
+ struct inferior *inf;
+
if (!gdb_has_a_terminal ())
{
- printf_filtered ("This GDB does not control a terminal.\n");
+ printf_filtered (_("This GDB does not control a terminal.\n"));
return;
}
- printf_filtered ("Inferior's terminal status (currently saved by GDB):\n");
+ if (ptid_equal (inferior_ptid, null_ptid))
+ return;
+
+ inf = current_inferior ();
+
+ printf_filtered (_("Inferior's terminal status (currently saved by GDB):\n"));
/* First the fcntl flags. */
{
int flags;
- flags = tflags_inferior;
+ flags = inf->terminal_info->tflags;
printf_filtered ("File descriptor flags = ");
#ifdef PROCESS_GROUP_TYPE
printf_filtered ("Process group = %d\n",
- (int) inferior_process_group);
+ (int) inf->terminal_info->process_group);
#endif
- SERIAL_PRINT_TTY_STATE (stdin_serial, inferior_ttystate, gdb_stdout);
+ serial_print_tty_state (stdin_serial,
+ inf->terminal_info->ttystate,
+ gdb_stdout);
}
\f
/* NEW_TTY_PREFORK is called before forking a new child process,
the terminal specified in the NEW_TTY_PREFORK call. */
void
-new_tty_prefork (char *ttyname)
+new_tty_prefork (const char *ttyname)
{
/* Save the name for later, for determining whether we and the child
are sharing a tty. */
inferior_thisrun_terminal = ttyname;
}
+
+/* If RESULT, assumed to be the return value from a system call, is
+ negative, print the error message indicated by errno and exit.
+ MSG should identify the operation that failed. */
+static void
+check_syscall (const char *msg, int result)
+{
+ if (result < 0)
+ {
+ print_sys_errmsg (msg, errno);
+ _exit (1);
+ }
+}
+
void
new_tty (void)
{
- register int tty;
+ int tty;
if (inferior_thisrun_terminal == 0)
return;
#endif
/* Now open the specified new terminal. */
-
-#ifdef USE_O_NOCTTY
tty = open (inferior_thisrun_terminal, O_RDWR | O_NOCTTY);
-#else
- tty = open (inferior_thisrun_terminal, O_RDWR);
-#endif
- if (tty == -1)
- {
- print_sys_errmsg (inferior_thisrun_terminal, errno);
- _exit (1);
- }
+ check_syscall (inferior_thisrun_terminal, tty);
/* Avoid use of dup2; doesn't exist on all systems. */
if (tty != 0)
{
close (0);
- dup (tty);
+ check_syscall ("dup'ing tty into fd 0", dup (tty));
}
if (tty != 1)
{
close (1);
- dup (tty);
+ check_syscall ("dup'ing tty into fd 1", dup (tty));
}
if (tty != 2)
{
close (2);
- dup (tty);
+ check_syscall ("dup'ing tty into fd 2", dup (tty));
}
+
+#ifdef TIOCSCTTY
+ /* Make tty our new controlling terminal. */
+ if (ioctl (tty, TIOCSCTTY, 0) == -1)
+ /* Mention GDB in warning because it will appear in the inferior's
+ terminal instead of GDB's. */
+ warning ("GDB: Failed to set controlling terminal: %s",
+ safe_strerror (errno));
+#endif
+
if (tty > 2)
close (tty);
#endif /* !go32 && !win32 */
}
-\f
-/* Kill the inferior process. Make us have no inferior. */
-/* ARGSUSED */
-static void
-kill_command (char *arg, int from_tty)
-{
- /* FIXME: This should not really be inferior_ptid (or target_has_execution).
- It should be a distinct flag that indicates that a target is active, cuz
- some targets don't have processes! */
+/* NEW_TTY_POSTFORK is called after forking a new child process, and
+ adding it to the inferior table, to store the TTYNAME being used by
+ the child, or null if it sharing the terminal with gdb. */
- if (ptid_equal (inferior_ptid, null_ptid))
- error ("The program is not being run.");
- if (!query ("Kill the program being debugged? "))
- error ("Not confirmed.");
- target_kill ();
+void
+new_tty_postfork (void)
+{
+ /* Save the name for later, for determining whether we and the child
+ are sharing a tty. */
- init_thread_list (); /* Destroy thread info */
+ if (inferior_thisrun_terminal)
+ current_inferior ()->terminal_info->run_terminal
+ = xstrdup (inferior_thisrun_terminal);
- /* Killing off the inferior can leave us with a core file. If so,
- print the state we are left in. */
- if (target_has_stack)
- {
- printf_filtered ("In %s,\n", target_longname);
- if (selected_frame == NULL)
- fputs_filtered ("No selected stack frame.\n", gdb_stdout);
- else
- print_stack_frame (selected_frame, selected_frame_level, 1);
- }
+ inferior_thisrun_terminal = NULL;
}
+
\f
/* Call set_sigint_trap when you need to pass a signal on to an attached
process when handling SIGINT */
-/* ARGSUSED */
static void
pass_signal (int signo)
{
}
static void (*osig) ();
+static int osig_set;
void
set_sigint_trap (void)
{
- if (attach_flag || inferior_thisrun_terminal)
+ struct inferior *inf = current_inferior ();
+ if (inf->attach_flag || inf->terminal_info->run_terminal)
{
osig = (void (*)()) signal (SIGINT, pass_signal);
+ osig_set = 1;
}
+ else
+ osig_set = 0;
}
void
clear_sigint_trap (void)
{
- if (attach_flag || inferior_thisrun_terminal)
+ if (osig_set)
{
signal (SIGINT, osig);
+ osig_set = 0;
}
}
\f
-#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
-static void (*old_sigio) ();
-
-static void
-handle_sigio (int signo)
-{
- int numfds;
- fd_set readfds;
-
- signal (SIGIO, handle_sigio);
-
- FD_ZERO (&readfds);
- FD_SET (target_activity_fd, &readfds);
- numfds = select (target_activity_fd + 1, &readfds, NULL, NULL, NULL);
- if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds))
- {
-#ifndef _WIN32
- if ((*target_activity_function) ())
- kill (PIDGET (inferior_ptid), SIGINT);
-#endif
- }
-}
-static int old_fcntl_flags;
+/* Create a new session if the inferior will run in a different tty.
+ A session is UNIX's way of grouping processes that share a controlling
+ terminal, so a new one is needed if the inferior terminal will be
+ different from GDB's.
-void
-set_sigio_trap (void)
+ Returns the session id of the new session, 0 if no session was created
+ or -1 if an error occurred. */
+pid_t
+create_tty_session (void)
{
- if (target_activity_function)
- {
- old_sigio = (void (*)()) signal (SIGIO, handle_sigio);
- fcntl (target_activity_fd, F_SETOWN, getpid ());
- old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0);
- fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC);
- }
-}
+#ifdef HAVE_SETSID
+ pid_t ret;
-void
-clear_sigio_trap (void)
-{
- if (target_activity_function)
- {
- signal (SIGIO, old_sigio);
- fcntl (target_activity_fd, F_SETFL, old_fcntl_flags);
- }
-}
-#else /* No SIGIO. */
-void
-set_sigio_trap (void)
-{
- if (target_activity_function)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
-}
+ if (!job_control || inferior_thisrun_terminal == 0)
+ return 0;
-void
-clear_sigio_trap (void)
-{
- if (target_activity_function)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ ret = setsid ();
+ if (ret == -1)
+ warning ("Failed to create new terminal session: setsid: %s",
+ safe_strerror (errno));
+
+ return ret;
+#else
+ return 0;
+#endif /* HAVE_SETSID */
}
-#endif /* No SIGIO. */
-\f
/* This is here because this is where we figure out whether we (probably)
have job control. Just using job_control only does part of it because
if (job_control)
{
-#if defined (NEED_POSIX_SETPGID) || (defined (HAVE_TERMIOS) && defined (HAVE_SETPGID))
- /* setpgid (0, 0) is supposed to work and mean the same thing as
- this, but on Ultrix 4.2A it fails with EPERM (and
+#if defined (HAVE_TERMIOS) || defined (TIOCGPGRP)
+#ifdef HAVE_SETPGID
+ /* The call setpgid (0, 0) is supposed to work and mean the same
+ thing as this, but on Ultrix 4.2A it fails with EPERM (and
setpgid (getpid (), getpid ()) succeeds). */
retval = setpgid (getpid (), getpid ());
#else
-#if defined (TIOCGPGRP)
-#if defined(USG) && !defined(SETPGRP_ARGS)
+#ifdef HAVE_SETPGRP
+#ifdef SETPGRP_VOID
retval = setpgrp ();
#else
retval = setpgrp (getpid (), getpid ());
-#endif /* USG */
-#endif /* TIOCGPGRP. */
-#endif /* NEED_POSIX_SETPGID */
+#endif
+#endif /* HAVE_SETPGRP */
+#endif /* HAVE_SETPGID */
+#endif /* defined (HAVE_TERMIOS) || defined (TIOCGPGRP) */
}
+
return retval;
}
+/* Get all the current tty settings (including whether we have a
+ tty at all!). We can't do this in _initialize_inflow because
+ serial_fdopen() won't work until the serial_ops_list is
+ initialized, but we don't want to do it lazily either, so
+ that we can guarantee stdin_serial is opened if there is
+ a terminal. */
+void
+initialize_stdin_serial (void)
+{
+ stdin_serial = serial_fdopen (0);
+}
+
void
_initialize_inflow (void)
{
add_info ("terminal", term_info,
- "Print inferior's saved terminal status.");
-
- add_com ("kill", class_run, kill_command,
- "Kill execution of program being debugged.");
-
- inferior_ptid = null_ptid;
+ _("Print inferior's saved terminal status."));
terminal_is_ours = 1;
job_control = 0;
#endif /* TIOCGPGRP */
#endif /* sgtty */
+
+ observer_attach_new_inferior (inflow_new_inferior);
+ observer_attach_inferior_exit (inflow_inferior_exit);
}