/* Low level interface to ptrace, for GDB when running under Unix.
- Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ Copyright (C) 1986-2015 Free Software Foundation, Inc.
This file is part of GDB.
#include "terminal.h"
#include "target.h"
#include "gdbthread.h"
-
-#include "gdb_string.h"
+#include "observer.h"
#include <signal.h>
#include <fcntl.h>
#include "gdb_select.h"
#include "inflow.h"
+#include "gdbcmd.h"
#ifdef HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#define O_NOCTTY 0
#endif
-#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
-static void handle_sigio (int);
-#endif
-
extern void _initialize_inflow (void);
static void pass_signal (int);
-static void kill_command (char *, int);
-
-static void terminal_ours_1 (int);
+static void child_terminal_ours_1 (int);
\f
/* Record terminal status separately for debugger and inferior. */
static struct serial *stdin_serial;
-/* TTY state for the inferior. We save it whenever the inferior stops, and
- restore it when it resumes. */
-static serial_ttystate inferior_ttystate;
+/* Terminal related info we need to keep track of. Each inferior
+ holds an instance of this structure --- we save it whenever the
+ corresponding inferior stops, and restore it to the foreground
+ inferior when it resumes. */
+struct terminal_info
+{
+ /* The name of the tty (from the `tty' command) that we gave to the
+ inferior when it was started. */
+ char *run_terminal;
+
+ /* TTY state. We save it whenever the inferior stops, and restore
+ it when it resumes. */
+ serial_ttystate ttystate;
+
+#ifdef PROCESS_GROUP_TYPE
+ /* Process group. Saved and restored just like ttystate. */
+ PROCESS_GROUP_TYPE process_group;
+#endif
+
+ /* fcntl flags. Saved and restored just like ttystate. */
+ int tflags;
+};
-/* Our own tty state, which we restore every time we need to deal with the
- terminal. We only set it once, when GDB first starts. The settings of
- flags which readline saves and restores and unimportant. */
-static serial_ttystate our_ttystate;
+/* Our own tty state, which we restore every time we need to deal with
+ the terminal. This is only set once, when GDB first starts. The
+ settings of flags which readline saves and restores and
+ unimportant. */
+static struct terminal_info our_terminal_info;
-/* fcntl flags for us and the inferior. Saved and restored just like
- {our,inferior}_ttystate. */
-static int tflags_inferior;
-static int tflags_ours;
+/* Snapshot of our own tty state taken during initialization of GDB.
+ This is used as the initial tty state given to each new inferior. */
+static serial_ttystate initial_gdb_ttystate;
+
+static struct terminal_info *get_inflow_inferior_data (struct inferior *);
#ifdef PROCESS_GROUP_TYPE
-/* Process group for us and the inferior. Saved and restored just like
- {our,inferior}_ttystate. */
-PROCESS_GROUP_TYPE our_process_group;
-PROCESS_GROUP_TYPE inferior_process_group;
+
+/* Return the process group of the current inferior. */
+
+PROCESS_GROUP_TYPE
+inferior_process_group (void)
+{
+ return get_inflow_inferior_data (current_inferior ())->process_group;
+}
#endif
/* While the inferior is running, we want SIGINT and SIGQUIT to go to the
we save our handlers in these two variables and set SIGINT and SIGQUIT
to SIG_IGN. */
-static void (*sigint_ours) ();
-static void (*sigquit_ours) ();
-
-/* The name of the tty (from the `tty' command) that we gave to the inferior
- when it was last started. */
+static sighandler_t sigint_ours;
+static sighandler_t sigquit_ours;
+/* The name of the tty (from the `tty' command) that we're giving to
+ the inferior when starting it up. This is only (and should only
+ be) used as a transient global by new_tty_prefork,
+ create_tty_session, new_tty and new_tty_postfork, all called from
+ fork_inferior, while forking a new child. */
static const char *inferior_thisrun_terminal;
/* Nonzero if our terminal settings are in effect. Zero if the
gdb_getpgrp (void)
{
int process_group = -1;
+
#ifdef HAVE_TERMIOS
process_group = tcgetpgrp (0);
#endif
}
#endif
-enum
+enum gdb_has_a_terminal_flag_enum
{
yes, no, have_not_checked
}
gdb_has_a_terminal_flag = have_not_checked;
+/* The value of the "interactive-mode" setting. */
+static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
+
+/* Implement the "show interactive-mode" option. */
+
+static void
+show_interactive_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ if (interactive_mode == AUTO_BOOLEAN_AUTO)
+ fprintf_filtered (file, "Debugger's interactive mode "
+ "is %s (currently %s).\n",
+ value, gdb_has_a_terminal () ? "on" : "off");
+ else
+ fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
+}
+
+/* Set the initial tty state that is to be inherited by new inferiors. */
+
+void
+set_initial_gdb_ttystate (void)
+{
+ initial_gdb_ttystate = serial_get_tty_state (stdin_serial);
+}
+
/* Does GDB have a terminal (on stdin)? */
int
gdb_has_a_terminal (void)
{
+ if (interactive_mode != AUTO_BOOLEAN_AUTO)
+ return interactive_mode == AUTO_BOOLEAN_TRUE;
+
switch (gdb_has_a_terminal_flag)
{
case yes:
initialized. */
#ifdef F_GETFL
- tflags_ours = fcntl (0, F_GETFL, 0);
+ our_terminal_info.tflags = fcntl (0, F_GETFL, 0);
#endif
gdb_has_a_terminal_flag = no;
if (stdin_serial != NULL)
{
- our_ttystate = serial_get_tty_state (stdin_serial);
+ our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
- if (our_ttystate != NULL)
+ if (our_terminal_info.ttystate != NULL)
{
gdb_has_a_terminal_flag = yes;
- our_process_group = gdb_getpgrp ();
+#ifdef PROCESS_GROUP_TYPE
+ our_terminal_info.process_group = gdb_getpgrp ();
+#endif
}
}
fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \
what, safe_strerror (errno))
-static void terminal_ours_1 (int);
-
/* Initialize the terminal settings we record for the inferior,
before we actually run the inferior. */
void
-terminal_init_inferior_with_pgrp (int pgrp)
+child_terminal_init_with_pgrp (int pgrp)
{
- if (gdb_has_a_terminal ())
- {
- /* We could just as well copy our_ttystate (if we felt like
- adding a new function serial_copy_tty_state()). */
- if (inferior_ttystate)
- xfree (inferior_ttystate);
- inferior_ttystate = serial_get_tty_state (stdin_serial);
+ struct inferior *inf = current_inferior ();
+ struct terminal_info *tinfo = get_inflow_inferior_data (inf);
#ifdef PROCESS_GROUP_TYPE
- inferior_process_group = pgrp;
+ /* Store the process group even without a terminal as it is used not
+ only to reset the tty foreground process group, but also to
+ interrupt the inferior. */
+ tinfo->process_group = pgrp;
#endif
+ if (gdb_has_a_terminal ())
+ {
+ xfree (tinfo->ttystate);
+ tinfo->ttystate = serial_copy_tty_state (stdin_serial,
+ initial_gdb_ttystate);
+
/* Make sure that next time we call terminal_inferior (which will be
before the program runs, as it needs to be), we install the new
process group. */
and gdb must be able to restore it correctly. */
void
-terminal_save_ours (void)
+gdb_save_tty_state (void)
{
if (gdb_has_a_terminal ())
{
- /* We could just as well copy our_ttystate (if we felt like adding
- a new function serial_copy_tty_state). */
- if (our_ttystate)
- xfree (our_ttystate);
- our_ttystate = serial_get_tty_state (stdin_serial);
+ xfree (our_terminal_info.ttystate);
+ our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
}
}
void
-terminal_init_inferior (void)
+child_terminal_init (struct target_ops *self)
{
#ifdef PROCESS_GROUP_TYPE
- /* This is for Lynx, and should be cleaned up by having Lynx be a separate
- debugging target with a version of target_terminal_init_inferior which
- passes in the process group to a generic routine which does all the work
- (and the non-threaded child_terminal_init_inferior can just pass in
- inferior_ptid to the same routine). */
+ /* This is for Lynx, and should be cleaned up by having Lynx be a
+ separate debugging target with a version of target_terminal_init
+ which passes in the process group to a generic routine which does
+ all the work (and the non-threaded child_terminal_init can just
+ pass in inferior_ptid to the same routine). */
/* We assume INFERIOR_PID is also the child's process group. */
- terminal_init_inferior_with_pgrp (PIDGET (inferior_ptid));
+ child_terminal_init_with_pgrp (ptid_get_pid (inferior_ptid));
#endif /* PROCESS_GROUP_TYPE */
}
/* Put the inferior's terminal settings into effect.
- This is preparation for starting or resuming the inferior. */
+ This is preparation for starting or resuming the inferior.
+
+ N.B. Targets that want to use this with async support must build that
+ support on top of this (e.g., the caller still needs to remove stdin
+ from the event loop). E.g., see linux_nat_terminal_inferior. */
void
-terminal_inferior (void)
+child_terminal_inferior (struct target_ops *self)
{
- if (gdb_has_a_terminal () && terminal_is_ours
- && inferior_ttystate != NULL
- && inferior_thisrun_terminal == 0)
+ struct inferior *inf;
+ struct terminal_info *tinfo;
+
+ if (!terminal_is_ours)
+ return;
+
+ inf = current_inferior ();
+ tinfo = get_inflow_inferior_data (inf);
+
+ if (gdb_has_a_terminal ()
+ && tinfo->ttystate != NULL
+ && tinfo->run_terminal == NULL)
{
int result;
/* Is there a reason this is being done twice? It happens both
places we use F_SETFL, so I'm inclined to think perhaps there
is some reason, however perverse. Perhaps not though... */
- result = fcntl (0, F_SETFL, tflags_inferior);
- result = fcntl (0, F_SETFL, tflags_inferior);
+ result = fcntl (0, F_SETFL, tinfo->tflags);
+ result = fcntl (0, F_SETFL, tinfo->tflags);
OOPSY ("fcntl F_SETFL");
#endif
/* Because we were careful to not change in or out of raw mode in
terminal_ours, we will not change in our out of raw mode with
this call, so we don't flush any input. */
- result = serial_set_tty_state (stdin_serial, inferior_ttystate);
+ result = serial_set_tty_state (stdin_serial,
+ tinfo->ttystate);
OOPSY ("setting tty state");
if (!job_control)
{
- sigint_ours = (void (*)()) signal (SIGINT, SIG_IGN);
+ sigint_ours = signal (SIGINT, SIG_IGN);
#ifdef SIGQUIT
- sigquit_ours = (void (*)()) signal (SIGQUIT, SIG_IGN);
+ sigquit_ours = signal (SIGQUIT, SIG_IGN);
#endif
}
if (job_control)
{
#ifdef HAVE_TERMIOS
- result = tcsetpgrp (0, inferior_process_group);
- if (!attach_flag)
+ result = tcsetpgrp (0, tinfo->process_group);
+ if (!inf->attach_flag)
OOPSY ("tcsetpgrp");
#endif
#ifdef HAVE_SGTTY
- result = ioctl (0, TIOCSPGRP, &inferior_process_group);
- if (!attach_flag)
+ result = ioctl (0, TIOCSPGRP, &tinfo->process_group);
+ if (!inf->attach_flag)
OOPSY ("TIOCSPGRP");
#endif
}
so that no input is discarded.
After doing this, either terminal_ours or terminal_inferior
- should be called to get back to a normal state of affairs. */
+ should be called to get back to a normal state of affairs.
+
+ N.B. The implementation is (currently) no different than
+ child_terminal_ours. See child_terminal_ours_1. */
void
-terminal_ours_for_output (void)
+child_terminal_ours_for_output (struct target_ops *self)
{
- terminal_ours_1 (1);
+ child_terminal_ours_1 (1);
}
/* Put our terminal settings into effect.
First record the inferior's terminal settings
- so they can be restored properly later. */
+ so they can be restored properly later.
+
+ N.B. Targets that want to use this with async support must build that
+ support on top of this (e.g., the caller still needs to add stdin to the
+ event loop). E.g., see linux_nat_terminal_ours. */
void
-terminal_ours (void)
+child_terminal_ours (struct target_ops *self)
{
- terminal_ours_1 (0);
+ child_terminal_ours_1 (0);
}
/* output_only is not used, and should not be used unless we introduce
flags. */
static void
-terminal_ours_1 (int output_only)
+child_terminal_ours_1 (int output_only)
{
- /* Checking inferior_thisrun_terminal is necessary so that
+ struct inferior *inf;
+ struct terminal_info *tinfo;
+
+ if (terminal_is_ours)
+ return;
+
+ terminal_is_ours = 1;
+
+ /* Checking inferior->run_terminal is necessary so that
if GDB is running in the background, it won't block trying
to do the ioctl()'s below. Checking gdb_has_a_terminal
avoids attempting all the ioctl's when running in batch. */
- if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0)
+
+ inf = current_inferior ();
+ tinfo = get_inflow_inferior_data (inf);
+
+ if (tinfo->run_terminal != NULL || gdb_has_a_terminal () == 0)
return;
- if (!terminal_is_ours)
{
#ifdef SIGTTOU
/* Ignore this signal since it will happen when we try to set the
pgrp. */
- void (*osigttou) () = NULL;
+ sighandler_t osigttou = NULL;
#endif
int result;
- terminal_is_ours = 1;
-
#ifdef SIGTTOU
if (job_control)
- osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN);
+ osigttou = signal (SIGTTOU, SIG_IGN);
#endif
- if (inferior_ttystate)
- xfree (inferior_ttystate);
- inferior_ttystate = serial_get_tty_state (stdin_serial);
+ xfree (tinfo->ttystate);
+ tinfo->ttystate = serial_get_tty_state (stdin_serial);
#ifdef PROCESS_GROUP_TYPE
- if (!attach_flag)
+ if (!inf->attach_flag)
/* If setpgrp failed in terminal_inferior, this would give us
our process group instead of the inferior's. See
terminal_inferior for details. */
- inferior_process_group = gdb_getpgrp ();
+ tinfo->process_group = gdb_getpgrp ();
#endif
/* Here we used to set ICANON in our ttystate, but I believe this
mode, to avoid flushing input. We need to do the same thing
regardless of output_only, because we don't have separate
terminal_is_ours and terminal_is_ours_for_output flags. It's OK,
- though, since readline will deal with raw mode when/if it needs to.
- */
+ though, since readline will deal with raw mode when/if it needs
+ to. */
- serial_noflush_set_tty_state (stdin_serial, our_ttystate,
- inferior_ttystate);
+ serial_noflush_set_tty_state (stdin_serial, our_terminal_info.ttystate,
+ tinfo->ttystate);
if (job_control)
{
#ifdef HAVE_TERMIOS
- result = tcsetpgrp (0, our_process_group);
+ result = tcsetpgrp (0, our_terminal_info.process_group);
#if 0
/* This fails on Ultrix with EINVAL if you run the testsuite
in the background with nohup, and then log out. GDB never
used to check for an error here, so perhaps there are other
such situations as well. */
if (result == -1)
- fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n",
+ fprintf_unfiltered (gdb_stderr,
+ "[tcsetpgrp failed in child_terminal_ours: %s]\n",
safe_strerror (errno));
#endif
#endif /* termios */
#ifdef HAVE_SGTTY
- result = ioctl (0, TIOCSPGRP, &our_process_group);
+ result = ioctl (0, TIOCSPGRP, &our_terminal_info.process_group);
#endif
}
}
#ifdef F_GETFL
- tflags_inferior = fcntl (0, F_GETFL, 0);
+ tinfo->tflags = fcntl (0, F_GETFL, 0);
/* Is there a reason this is being done twice? It happens both
places we use F_SETFL, so I'm inclined to think perhaps there
is some reason, however perverse. Perhaps not though... */
- result = fcntl (0, F_SETFL, tflags_ours);
- result = fcntl (0, F_SETFL, tflags_ours);
+ result = fcntl (0, F_SETFL, our_terminal_info.tflags);
+ result = fcntl (0, F_SETFL, our_terminal_info.tflags);
#endif
}
}
+/* Per-inferior data key. */
+static const struct inferior_data *inflow_inferior_data;
+
+static void
+inflow_inferior_data_cleanup (struct inferior *inf, void *arg)
+{
+ struct terminal_info *info = arg;
+
+ xfree (info->run_terminal);
+ xfree (info->ttystate);
+ xfree (info);
+}
+
+/* Get the current svr4 data. If none is found yet, add it now. This
+ function always returns a valid object. */
+
+static struct terminal_info *
+get_inflow_inferior_data (struct inferior *inf)
+{
+ struct terminal_info *info;
+
+ info = inferior_data (inf, inflow_inferior_data);
+ if (info == NULL)
+ {
+ info = XCNEW (struct terminal_info);
+ set_inferior_data (inf, inflow_inferior_data, info);
+ }
+
+ return info;
+}
+
+/* This is a "inferior_exit" observer. Releases the TERMINAL_INFO member
+ of the inferior structure. This field is private to inflow.c, and
+ its type is opaque to the rest of GDB. PID is the target pid of
+ the inferior that is about to be removed from the inferior
+ list. */
+
+static void
+inflow_inferior_exit (struct inferior *inf)
+{
+ struct terminal_info *info;
+
+ info = inferior_data (inf, inflow_inferior_data);
+ if (info != NULL)
+ {
+ xfree (info->run_terminal);
+ xfree (info->ttystate);
+ xfree (info);
+ set_inferior_data (inf, inflow_inferior_data, NULL);
+ }
+}
+
+void
+copy_terminal_info (struct inferior *to, struct inferior *from)
+{
+ struct terminal_info *tinfo_to, *tinfo_from;
+
+ tinfo_to = get_inflow_inferior_data (to);
+ tinfo_from = get_inflow_inferior_data (from);
+
+ xfree (tinfo_to->run_terminal);
+ xfree (tinfo_to->ttystate);
+
+ *tinfo_to = *tinfo_from;
+
+ if (tinfo_from->run_terminal)
+ tinfo_to->run_terminal
+ = xstrdup (tinfo_from->run_terminal);
+
+ if (tinfo_from->ttystate)
+ tinfo_to->ttystate
+ = serial_copy_tty_state (stdin_serial, tinfo_from->ttystate);
+}
+
void
term_info (char *arg, int from_tty)
{
}
void
-child_terminal_info (char *args, int from_tty)
+child_terminal_info (struct target_ops *self, const char *args, int from_tty)
{
+ struct inferior *inf;
+ struct terminal_info *tinfo;
+
if (!gdb_has_a_terminal ())
{
printf_filtered (_("This GDB does not control a terminal.\n"));
return;
}
- printf_filtered (_("Inferior's terminal status (currently saved by GDB):\n"));
+ if (ptid_equal (inferior_ptid, null_ptid))
+ return;
+
+ inf = current_inferior ();
+ tinfo = get_inflow_inferior_data (inf);
+
+ printf_filtered (_("Inferior's terminal status "
+ "(currently saved by GDB):\n"));
/* First the fcntl flags. */
{
int flags;
- flags = tflags_inferior;
+ flags = tinfo->tflags;
printf_filtered ("File descriptor flags = ");
#ifndef O_ACCMODE
#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
#endif
- /* (O_ACCMODE) parens are to avoid Ultrix header file bug */
+ /* (O_ACCMODE) parens are to avoid Ultrix header file bug. */
switch (flags & (O_ACCMODE))
{
case O_RDONLY:
}
#ifdef PROCESS_GROUP_TYPE
- printf_filtered ("Process group = %d\n",
- (int) inferior_process_group);
+ printf_filtered ("Process group = %d\n", (int) tinfo->process_group);
#endif
- serial_print_tty_state (stdin_serial, inferior_ttystate, gdb_stdout);
+ serial_print_tty_state (stdin_serial, tinfo->ttystate, gdb_stdout);
}
\f
/* NEW_TTY_PREFORK is called before forking a new child process,
inferior_thisrun_terminal = ttyname;
}
+#if !defined(__GO32__) && !defined(_WIN32)
+/* If RESULT, assumed to be the return value from a system call, is
+ negative, print the error message indicated by errno and exit.
+ MSG should identify the operation that failed. */
+static void
+check_syscall (const char *msg, int result)
+{
+ if (result < 0)
+ {
+ print_sys_errmsg (msg, errno);
+ _exit (1);
+ }
+}
+#endif
+
void
new_tty (void)
{
#ifdef TIOCNOTTY
/* Disconnect the child process from our controlling terminal. On some
systems (SVR4 for example), this may cause a SIGTTOU, so temporarily
- ignore SIGTTOU. */
+ ignore SIGTTOU. */
tty = open ("/dev/tty", O_RDWR);
if (tty > 0)
{
- void (*osigttou) ();
+ sighandler_t osigttou;
- osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN);
+ osigttou = signal (SIGTTOU, SIG_IGN);
ioctl (tty, TIOCNOTTY, 0);
close (tty);
signal (SIGTTOU, osigttou);
/* Now open the specified new terminal. */
tty = open (inferior_thisrun_terminal, O_RDWR | O_NOCTTY);
- if (tty == -1)
- {
- print_sys_errmsg (inferior_thisrun_terminal, errno);
- _exit (1);
- }
+ check_syscall (inferior_thisrun_terminal, tty);
/* Avoid use of dup2; doesn't exist on all systems. */
if (tty != 0)
{
close (0);
- dup (tty);
+ check_syscall ("dup'ing tty into fd 0", dup (tty));
}
if (tty != 1)
{
close (1);
- dup (tty);
+ check_syscall ("dup'ing tty into fd 1", dup (tty));
}
if (tty != 2)
{
close (2);
- dup (tty);
+ check_syscall ("dup'ing tty into fd 2", dup (tty));
}
#ifdef TIOCSCTTY
if (ioctl (tty, TIOCSCTTY, 0) == -1)
/* Mention GDB in warning because it will appear in the inferior's
terminal instead of GDB's. */
- warning ("GDB: Failed to set controlling terminal: %s",
+ warning (_("GDB: Failed to set controlling terminal: %s"),
safe_strerror (errno));
#endif
close (tty);
#endif /* !go32 && !win32 */
}
-\f
-/* Kill the inferior process. Make us have no inferior. */
-static void
-kill_command (char *arg, int from_tty)
-{
- /* FIXME: This should not really be inferior_ptid (or target_has_execution).
- It should be a distinct flag that indicates that a target is active, cuz
- some targets don't have processes! */
+/* NEW_TTY_POSTFORK is called after forking a new child process, and
+ adding it to the inferior table, to store the TTYNAME being used by
+ the child, or null if it sharing the terminal with gdb. */
- if (ptid_equal (inferior_ptid, null_ptid))
- error (_("The program is not being run."));
- if (!query ("Kill the program being debugged? "))
- error (_("Not confirmed."));
- target_kill ();
-
- init_thread_list (); /* Destroy thread info */
+void
+new_tty_postfork (void)
+{
+ /* Save the name for later, for determining whether we and the child
+ are sharing a tty. */
- /* Killing off the inferior can leave us with a core file. If so,
- print the state we are left in. */
- if (target_has_stack)
+ if (inferior_thisrun_terminal)
{
- printf_filtered (_("In %s,\n"), target_longname);
- print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
+ struct inferior *inf = current_inferior ();
+ struct terminal_info *tinfo = get_inflow_inferior_data (inf);
+
+ tinfo->run_terminal = xstrdup (inferior_thisrun_terminal);
}
- bfd_cache_close_all ();
+
+ inferior_thisrun_terminal = NULL;
}
+
\f
/* Call set_sigint_trap when you need to pass a signal on to an attached
- process when handling SIGINT */
+ process when handling SIGINT. */
static void
pass_signal (int signo)
{
#ifndef _WIN32
- kill (PIDGET (inferior_ptid), SIGINT);
+ kill (ptid_get_pid (inferior_ptid), SIGINT);
#endif
}
-static void (*osig) ();
+static sighandler_t osig;
+static int osig_set;
void
set_sigint_trap (void)
{
- if (attach_flag || inferior_thisrun_terminal)
+ struct inferior *inf = current_inferior ();
+ struct terminal_info *tinfo = get_inflow_inferior_data (inf);
+
+ if (inf->attach_flag || tinfo->run_terminal)
{
- osig = (void (*)()) signal (SIGINT, pass_signal);
+ osig = signal (SIGINT, pass_signal);
+ osig_set = 1;
}
+ else
+ osig_set = 0;
}
void
clear_sigint_trap (void)
{
- if (attach_flag || inferior_thisrun_terminal)
+ if (osig_set)
{
signal (SIGINT, osig);
+ osig_set = 0;
}
}
\f
-#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
-static void (*old_sigio) ();
-
-static void
-handle_sigio (int signo)
-{
- int numfds;
- fd_set readfds;
-
- signal (SIGIO, handle_sigio);
-
- FD_ZERO (&readfds);
- FD_SET (target_activity_fd, &readfds);
- numfds = gdb_select (target_activity_fd + 1, &readfds, NULL, NULL, NULL);
- if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds))
- {
-#ifndef _WIN32
- if ((*target_activity_function) ())
- kill (PIDGET (inferior_ptid), SIGINT);
-#endif
- }
-}
-
-static int old_fcntl_flags;
-
-void
-set_sigio_trap (void)
-{
- if (target_activity_function)
- {
- old_sigio = (void (*)()) signal (SIGIO, handle_sigio);
- fcntl (target_activity_fd, F_SETOWN, getpid ());
- old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0);
- fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC);
- }
-}
-
-void
-clear_sigio_trap (void)
-{
- if (target_activity_function)
- {
- signal (SIGIO, old_sigio);
- fcntl (target_activity_fd, F_SETFL, old_fcntl_flags);
- }
-}
-#else /* No SIGIO. */
-void
-set_sigio_trap (void)
-{
- if (target_activity_function)
- internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
-}
-
-void
-clear_sigio_trap (void)
-{
- if (target_activity_function)
- internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
-}
-#endif /* No SIGIO. */
-\f
/* Create a new session if the inferior will run in a different tty.
A session is UNIX's way of grouping processes that share a controlling
ret = setsid ();
if (ret == -1)
- warning ("Failed to create new terminal session: setsid: %s",
+ warning (_("Failed to create new terminal session: setsid: %s"),
safe_strerror (errno));
return ret;
add_info ("terminal", term_info,
_("Print inferior's saved terminal status."));
- add_com ("kill", class_run, kill_command,
- _("Kill execution of program being debugged."));
-
- inferior_ptid = null_ptid;
+ add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
+ &interactive_mode, _("\
+Set whether GDB's standard input is a terminal."), _("\
+Show whether GDB's standard input is a terminal."), _("\
+If on, GDB assumes that standard input is a terminal. In practice, it\n\
+means that GDB should wait for the user to answer queries associated to\n\
+commands entered at the command prompt. If off, GDB assumes that standard\n\
+input is not a terminal, and uses the default answer to all queries.\n\
+If auto (the default), determine which mode to use based on the standard\n\
+input settings."),
+ NULL,
+ show_interactive_mode,
+ &setlist, &showlist);
terminal_is_ours = 1;
#ifdef _SC_JOB_CONTROL
job_control = sysconf (_SC_JOB_CONTROL);
#else
- job_control = 0; /* have to assume the worst */
+ job_control = 0; /* Have to assume the worst. */
#endif /* _SC_JOB_CONTROL */
#endif /* _POSIX_JOB_CONTROL */
#endif /* HAVE_TERMIOS */
job_control = 0;
#endif /* TIOCGPGRP */
#endif /* sgtty */
+
+ observer_attach_inferior_exit (inflow_inferior_exit);
+
+ inflow_inferior_data
+ = register_inferior_data_with_cleanup (NULL, inflow_inferior_data_cleanup);
}