-/* Start and stop the inferior process, for GDB.
- Copyright (C) 1986, 1987, 1988 Free Software Foundation, Inc.
-
-GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone
-for the consequences of using it or for whether it serves any
-particular purpose or works at all, unless he says so in writing.
-Refer to the GDB General Public License for full details.
-
-Everyone is granted permission to copy, modify and redistribute GDB,
-but only under the conditions described in the GDB General Public
-License. A copy of this license is supposed to have been given to you
-along with GDB so you can know your rights and responsibilities. It
-should be in a file named COPYING. Among other things, the copyright
-notice and this notice must be preserved on all copies.
-
-In other words, go ahead and share GDB, but don't try to stop
-anyone else from sharing it farther. Help stamp out software hoarding!
-*/
+/* Target-struct-independent code to start (run) and stop an inferior process.
+ Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996
+ Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include "initialize.h"
-#include "param.h"
+#include "gdb_string.h"
+#include <ctype.h>
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
+#include "breakpoint.h"
#include "wait.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "gdbthread.h"
+#include "annotate.h"
-#include <stdio.h>
#include <signal.h>
-#include <a.out.h>
+
+/* unistd.h is needed to #define X_OK */
+#ifdef USG
+#include <unistd.h>
+#else
#include <sys/file.h>
+#endif
-#ifdef UMAX_PTRACE
-#include <sys/param.h>
-#include <sys/ptrace.h>
-#endif UMAX_PTRACE
+/* Prototypes for local functions */
-extern char *sys_siglist[];
-extern int errno;
+static void signals_info PARAMS ((char *, int));
-/* Tables of how to react to signals; the user sets them. */
+static void handle_command PARAMS ((char *, int));
-static char signal_stop[NSIG];
-static char signal_print[NSIG];
-static char signal_program[NSIG];
+static void sig_print_info PARAMS ((enum target_signal));
-/* Nonzero if breakpoints are now inserted in the inferior. */
+static void sig_print_header PARAMS ((void));
-static int breakpoints_inserted;
+static void resume_cleanups PARAMS ((int));
-/* Function inferior was in as of last step command. */
+static int hook_stop_stub PARAMS ((char *));
-static struct symbol *step_start_function;
+/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
+ program. It needs to examine the jmp_buf argument and extract the PC
+ from it. The return value is non-zero on success, zero otherwise. */
-/* This is the sequence of bytes we insert for a breakpoint. */
+#ifndef GET_LONGJMP_TARGET
+#define GET_LONGJMP_TARGET(PC_ADDR) 0
+#endif
-static char break_insn[] = BREAKPOINT;
-/* Nonzero => address for special breakpoint for resuming stepping. */
+/* Some machines have trampoline code that sits between function callers
+ and the actual functions themselves. If this machine doesn't have
+ such things, disable their processing. */
-static CORE_ADDR step_resume_break_address;
+#ifndef SKIP_TRAMPOLINE_CODE
+#define SKIP_TRAMPOLINE_CODE(pc) 0
+#endif
-/* Original contents of the byte where the special breakpoint is. */
+/* Dynamic function trampolines are similar to solib trampolines in that they
+ are between the caller and the callee. The difference is that when you
+ enter a dynamic trampoline, you can't determine the callee's address. Some
+ (usually complex) code needs to run in the dynamic trampoline to figure out
+ the callee's address. This macro is usually called twice. First, when we
+ enter the trampoline (looks like a normal function call at that point). It
+ should return the PC of a point within the trampoline where the callee's
+ address is known. Second, when we hit the breakpoint, this routine returns
+ the callee's address. At that point, things proceed as per a step resume
+ breakpoint. */
+
+#ifndef DYNAMIC_TRAMPOLINE_NEXTPC
+#define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0
+#endif
-static char step_resume_break_shadow[sizeof break_insn];
+/* For SVR4 shared libraries, each call goes through a small piece of
+ trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
+ to nonzero if we are current stopped in one of these. */
-/* Nonzero means the special breakpoint is a duplicate
- so it has not itself been inserted. */
+#ifndef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0
+#endif
-static int step_resume_break_duplicate;
+/* In some shared library schemes, the return path from a shared library
+ call may need to go through a trampoline too. */
-/* Nonzero if we are expecting a trace trap and should proceed from it.
- 2 means expecting 2 trace traps and should continue both times.
- That occurs when we tell sh to exec the program: we will get
- a trap after the exec of sh and a second when the program is exec'd. */
+#ifndef IN_SOLIB_RETURN_TRAMPOLINE
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc,name) 0
+#endif
+
+/* On some systems, the PC may be left pointing at an instruction that won't
+ actually be executed. This is usually indicated by a bit in the PSW. If
+ we find ourselves in such a state, then we step the target beyond the
+ nullified instruction before returning control to the user so as to avoid
+ confusion. */
+
+#ifndef INSTRUCTION_NULLIFIED
+#define INSTRUCTION_NULLIFIED 0
+#endif
+
+/* Tables of how to react to signals; the user sets them. */
+
+static unsigned char *signal_stop;
+static unsigned char *signal_print;
+static unsigned char *signal_program;
+
+#define SET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 1; \
+ } while (0)
+
+#define UNSET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 0; \
+ } while (0)
+
+
+/* Command list pointer for the "stop" placeholder. */
+
+static struct cmd_list_element *stop_command;
+
+/* Nonzero if breakpoints are now inserted in the inferior. */
+
+static int breakpoints_inserted;
+
+/* Function inferior was in as of last step command. */
+
+static struct symbol *step_start_function;
+
+/* Nonzero if we are expecting a trace trap and should proceed from it. */
static int trap_expected;
+/* Nonzero if we want to give control to the user when we're notified
+ of shared library events by the dynamic linker. */
+static int stop_on_solib_events;
+
+#ifdef HP_OS_BUG
/* Nonzero if the next time we try to continue the inferior, it will
step one instruction and generate a spurious trace trap.
This is used to compensate for a bug in HP-UX. */
static int trap_expected_after_continue;
+#endif
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
-static int stop_after_trap;
-
-/* Nonzero means expecting a trace trap due to attaching to a process. */
-
-static int stop_after_attach;
+int stop_after_trap;
-/* Nonzero if pc has been changed by the debugger
- since the inferior stopped. */
+/* Nonzero means expecting a trap and caller will handle it themselves.
+ It is used after attach, due to attaching to a process;
+ when running in the shell before the child program has been exec'd;
+ and when running some kinds of remote stuff (FIXME?). */
-int pc_changed;
+int stop_soon_quietly;
-/* Nonzero if debugging a remote machine via a serial link or ethernet. */
+/* Nonzero if proceed is being used for a "finish" command or a similar
+ situation when stop_registers should be saved. */
-int remote_debugging;
+int proceed_to_finish;
-/* Save register contents here when about to pop a stack dummy frame. */
+/* Save register contents here when about to pop a stack dummy frame,
+ if-and-only-if proceed_to_finish is set.
+ Thus this contains the return value from the called function (assuming
+ values are returned in a register). */
char stop_registers[REGISTER_BYTES];
static int breakpoints_failed;
-/* Nonzero if inferior is in sh before our program got exec'd. */
-
-static int running_in_shell;
-
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
-static void insert_step_breakpoint ();
-static void remove_step_breakpoint ();
-static void wait_for_inferior ();
-static void normal_stop ();
+#ifdef NO_SINGLE_STEP
+extern int one_stepped; /* From machine dependent code */
+extern void single_step (); /* Same. */
+#endif /* NO_SINGLE_STEP */
+
+extern void write_pc_pid PARAMS ((CORE_ADDR, int));
+
+\f
+/* Things to clean up if we QUIT out of resume (). */
+/* ARGSUSED */
+static void
+resume_cleanups (arg)
+ int arg;
+{
+ normal_stop ();
+}
+
+/* Resume the inferior, but allow a QUIT. This is useful if the user
+ wants to interrupt some lengthy single-stepping operation
+ (for child processes, the SIGINT goes to the inferior, and so
+ we get a SIGINT random_signal, but for remote debugging and perhaps
+ other targets, that's not true).
+
+ STEP nonzero if we should step (zero to continue instead).
+ SIG is the signal to give the inferior (zero for none). */
+void
+resume (step, sig)
+ int step;
+ enum target_signal sig;
+{
+ struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
+ QUIT;
+
+#ifdef CANNOT_STEP_BREAKPOINT
+ /* Most targets can step a breakpoint instruction, thus executing it
+ normally. But if this one cannot, just continue and we will hit
+ it anyway. */
+ if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ step = 0;
+#endif
+
+#ifdef NO_SINGLE_STEP
+ if (step) {
+ single_step(sig); /* Do it the hard way, w/temp breakpoints */
+ step = 0; /* ...and don't ask hardware to do it. */
+ }
+#endif
+
+ /* Handle any optimized stores to the inferior NOW... */
+#ifdef DO_DEFERRED_STORES
+ DO_DEFERRED_STORES;
+#endif
+
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
+
+ target_resume (-1, step, sig);
+ discard_cleanups (old_cleanups);
+}
-START_FILE
\f
/* Clear out all variables saying what to do when inferior is continued.
First do this, then set the ones you want, then call `proceed'. */
trap_expected = 0;
step_range_start = 0;
step_range_end = 0;
- step_frame = 0;
+ step_frame_address = 0;
step_over_calls = -1;
- step_resume_break_address = 0;
stop_after_trap = 0;
- stop_after_attach = 0;
+ stop_soon_quietly = 0;
+ proceed_to_finish = 0;
+ breakpoint_proceeded = 1; /* We're about to proceed... */
- /* Discard any remaining commands left by breakpoint we had stopped at. */
- clear_breakpoint_commands ();
+ /* Discard any remaining commands or status from previous stop. */
+ bpstat_clear (&stop_bpstat);
}
/* Basic routine for continuing the program in various fashions.
ADDR is the address to resume at, or -1 for resume where stopped.
- SIGNAL is the signal to give it, or 0 for none,
+ SIGGNAL is the signal to give it, or 0 for none,
or -1 for act according to how it stopped.
STEP is nonzero if should trap after one instruction.
-1 means return after that and print nothing.
You should call clear_proceed_status before calling proceed. */
void
-proceed (addr, signal, step)
+proceed (addr, siggnal, step)
CORE_ADDR addr;
- int signal;
+ enum target_signal siggnal;
int step;
{
int oneproc = 0;
if (step < 0)
stop_after_trap = 1;
- if (addr == -1)
+ if (addr == (CORE_ADDR)-1)
{
/* If there is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints
so that we do not stop right away. */
- if (!pc_changed && breakpoint_here_p (read_pc ()))
+ if (breakpoint_here_p (read_pc ()))
+ oneproc = 1;
+
+#ifdef STEP_SKIPS_DELAY
+ /* Check breakpoint_here_p first, because breakpoint_here_p is fast
+ (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
+ is slow (it needs to read memory from the target). */
+ if (breakpoint_here_p (read_pc () + 4)
+ && STEP_SKIPS_DELAY (read_pc ()))
oneproc = 1;
+#endif /* STEP_SKIPS_DELAY */
}
else
- write_register (PC_REGNUM, addr);
-
+ write_pc (addr);
+
+#ifdef PREPARE_TO_PROCEED
+ /* In a multi-threaded task we may select another thread and then continue.
+
+ In this case the thread that stopped at a breakpoint will immediately
+ cause another stop, if it is not stepped over first. On the other hand,
+ if (ADDR != -1) we only want to single step over the breakpoint if we did
+ switch to another thread.
+
+ If we are single stepping, don't do any of the above.
+ (Note that in the current implementation single stepping another
+ thread after a breakpoint and then continuing will cause the original
+ breakpoint to be hit again, but you can always continue, so it's not
+ a big deal.) */
+
+ if (! step && PREPARE_TO_PROCEED (1) && breakpoint_here_p (read_pc ()))
+ oneproc = 1;
+#endif /* PREPARE_TO_PROCEED */
+
+#ifdef HP_OS_BUG
if (trap_expected_after_continue)
{
/* If (step == 0), a trap will be automatically generated after
oneproc = 1;
trap_expected_after_continue = 0;
}
+#endif /* HP_OS_BUG */
if (oneproc)
/* We will get a trace trap after one instruction.
breakpoints_inserted = 1;
}
- /* Install inferior's terminal modes. */
- terminal_inferior ();
-
- if (signal >= 0)
- stop_signal = signal;
+ if (siggnal != TARGET_SIGNAL_DEFAULT)
+ stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (stop_signal < NSIG && !signal_program[stop_signal])
- stop_signal= 0;
+ else if (!signal_program[stop_signal])
+ stop_signal = TARGET_SIGNAL_0;
+
+ annotate_starting ();
+
+ /* Make sure that output from GDB appears before output from the
+ inferior. */
+ gdb_flush (gdb_stdout);
/* Resume inferior. */
- resume (oneproc || step, stop_signal);
+ resume (oneproc || step || bpstat_should_step (), stop_signal);
/* Wait for it to stop (if not standalone)
and in any case decode why it stopped, and act accordingly. */
normal_stop ();
}
-/* Writing the inferior pc as a register calls this function
- to inform infrun that the pc has been set in the debugger. */
-
-writing_pc (val)
- CORE_ADDR val;
-{
- stop_pc = val;
- pc_changed = 1;
-}
-
-/* Start an inferior process for the first time.
- Actually it was started by the fork that created it,
- but it will have stopped one instruction after execing sh.
- Here we must get it up to actual execution of the real program. */
-
-start_inferior ()
-{
- /* We will get a trace trap after one instruction.
- Continue it automatically. Eventually (after shell does an exec)
- it will get another trace trap. Then insert breakpoints and continue. */
- trap_expected = 2;
- running_in_shell = 0; /* Set to 1 at first SIGTRAP, 0 at second. */
- trap_expected_after_continue = 0;
- breakpoints_inserted = 0;
- mark_breakpoints_out ();
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- terminal_init_inferior ();
-
- /* Install inferior's terminal modes. */
- terminal_inferior ();
-
- if (remote_debugging)
- {
- trap_expected = 0;
- fetch_inferior_registers();
- set_current_frame (read_register(FP_REGNUM));
- stop_frame = get_current_frame();
- inferior_pid = 3;
- if (insert_breakpoints())
- fatal("Can't insert breakpoints");
- breakpoints_inserted = 1;
- proceed(-1, -1, 0);
- }
- else
- {
- wait_for_inferior ();
- normal_stop ();
- }
-}
+/* Record the pc and sp of the program the last time it stopped.
+ These are just used internally by wait_for_inferior, but need
+ to be preserved over calls to it and cleared when the inferior
+ is started. */
+static CORE_ADDR prev_pc;
+static CORE_ADDR prev_func_start;
+static char *prev_func_name;
+\f
/* Start remote-debugging of a machine over a serial link. */
void
start_remote ()
{
+ init_thread_list ();
+ init_wait_for_inferior ();
clear_proceed_status ();
- running_in_shell = 0;
+ stop_soon_quietly = 1;
trap_expected = 0;
- inferior_pid = 3;
- breakpoints_inserted = 0;
- mark_breakpoints_out ();
wait_for_inferior ();
- normal_stop();
+ normal_stop ();
}
-#ifdef ATTACH_DETACH
-
-/* Attach to process PID, then initialize for debugging it
- and wait for the trace-trap that results from attaching. */
+/* Initialize static vars when a new inferior begins. */
void
-attach_program (pid)
- int pid;
+init_wait_for_inferior ()
{
- attach (pid);
- inferior_pid = pid;
+ /* These are meaningless until the first time through wait_for_inferior. */
+ prev_pc = 0;
+ prev_func_start = 0;
+ prev_func_name = NULL;
- mark_breakpoints_out ();
- terminal_init_inferior ();
- clear_proceed_status ();
- stop_after_attach = 1;
- /*proceed (-1, 0, -2);*/
- wait_for_inferior ();
- normal_stop ();
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 0;
+#endif
+ breakpoints_inserted = 0;
+ breakpoint_init_inferior ();
+
+ /* Don't confuse first call to proceed(). */
+ stop_signal = TARGET_SIGNAL_0;
+}
+
+static void
+delete_breakpoint_current_contents (arg)
+ PTR arg;
+{
+ struct breakpoint **breakpointp = (struct breakpoint **)arg;
+ if (*breakpointp != NULL)
+ delete_breakpoint (*breakpointp);
}
-#endif /* ATTACH_DETACH */
\f
/* Wait for control to return from inferior to debugger.
If inferior gets a signal, we may decide to start it up again
When this function actually returns it means the inferior
should be left stopped and GDB should read more commands. */
-static void
+void
wait_for_inferior ()
{
- register int pid;
- WAITTYPE w;
- CORE_ADDR pc;
- int tem;
+ struct cleanup *old_cleanups;
+ struct target_waitstatus w;
int another_trap;
int random_signal;
- CORE_ADDR stop_sp;
- int stop_step_resume_break;
- int newmisc;
- int newfun_pc;
- struct symbol *newfun;
+ CORE_ADDR stop_func_start;
+ CORE_ADDR stop_func_end;
+ char *stop_func_name;
+#if 0
+ CORE_ADDR prologue_pc = 0;
+#endif
+ CORE_ADDR tmp;
struct symtab_and_line sal;
- int prev_pc;
-
- prev_pc = read_pc ();
+ int remove_breakpoints_on_following_step = 0;
+ int current_line;
+ struct symtab *current_symtab;
+ int handling_longjmp = 0; /* FIXME */
+ struct breakpoint *step_resume_breakpoint = NULL;
+ struct breakpoint *through_sigtramp_breakpoint = NULL;
+ int pid;
+ int update_step_sp = 0;
+
+ old_cleanups = make_cleanup (delete_breakpoint_current_contents,
+ &step_resume_breakpoint);
+ make_cleanup (delete_breakpoint_current_contents,
+ &through_sigtramp_breakpoint);
+ sal = find_pc_line(prev_pc, 0);
+ current_line = sal.line;
+ current_symtab = sal.symtab;
+
+ /* Are we stepping? */
+#define CURRENTLY_STEPPING() \
+ ((through_sigtramp_breakpoint == NULL \
+ && !handling_longjmp \
+ && ((step_range_end && step_resume_breakpoint == NULL) \
+ || trap_expected)) \
+ || bpstat_should_step ())
while (1)
{
- if (remote_debugging)
- remote_wait (&w);
+ /* We have to invalidate the registers BEFORE calling target_wait because
+ they can be loaded from the target while in target_wait. This makes
+ remote debugging a bit more efficient for those targets that provide
+ critical registers as part of their normal status mechanism. */
+
+ registers_changed ();
+
+ if (target_wait_hook)
+ pid = target_wait_hook (-1, &w);
+ else
+ pid = target_wait (-1, &w);
+
+ /* Gross.
+
+ We goto this label from elsewhere in wait_for_inferior when we want
+ to continue the main loop without calling "wait" and trashing the
+ waitstatus contained in W. */
+ have_waited:
+
+ flush_cached_frames ();
+
+ /* If it's a new process, add it to the thread database */
+
+ if (pid != inferior_pid
+ && !in_thread_list (pid))
+ {
+ fprintf_unfiltered (gdb_stderr, "[New %s]\n", target_pid_to_str (pid));
+ add_thread (pid);
+
+ /* We may want to consider not doing a resume here in order to give
+ the user a chance to play with the new thread. It might be good
+ to make that a user-settable option. */
+
+ /* At this point, all threads are stopped (happens automatically in
+ either the OS or the native code). Therefore we need to continue
+ all threads in order to make progress. */
+
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+
+ switch (w.kind)
+ {
+ case TARGET_WAITKIND_LOADED:
+ /* Ignore it gracefully. */
+ if (breakpoints_inserted)
+ {
+ mark_breakpoints_out ();
+ insert_breakpoints ();
+ }
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ case TARGET_WAITKIND_SPURIOUS:
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ case TARGET_WAITKIND_EXITED:
+ target_terminal_ours (); /* Must do this before mourn anyway */
+ annotate_exited (w.value.integer);
+ if (w.value.integer)
+ printf_filtered ("\nProgram exited with code 0%o.\n",
+ (unsigned int)w.value.integer);
+ else
+ printf_filtered ("\nProgram exited normally.\n");
+
+ /* Record the exit code in the convenience variable $_exitcode, so
+ that the user can inspect this again later. */
+ set_internalvar (lookup_internalvar ("_exitcode"),
+ value_from_longest (builtin_type_int,
+ (LONGEST) w.value.integer));
+ gdb_flush (gdb_stdout);
+ target_mourn_inferior ();
+#ifdef NO_SINGLE_STEP
+ one_stepped = 0;
+#endif
+ stop_print_frame = 0;
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_SIGNALLED:
+ stop_print_frame = 0;
+ stop_signal = w.value.sig;
+ target_terminal_ours (); /* Must do this before mourn anyway */
+ annotate_signalled ();
+
+ /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED
+ mean it is already dead? This has been here since GDB 2.8, so
+ perhaps it means rms didn't understand unix waitstatuses?
+ For the moment I'm just kludging around this in remote.c
+ rather than trying to change it here --kingdon, 5 Dec 1994. */
+ target_kill (); /* kill mourns as well */
+
+ printf_filtered ("\nProgram terminated with signal ");
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+
+ printf_filtered ("The program no longer exists.\n");
+ gdb_flush (gdb_stdout);
+#ifdef NO_SINGLE_STEP
+ one_stepped = 0;
+#endif
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_STOPPED:
+ /* This is the only case in which we keep going; the above cases
+ end in a continue or goto. */
+ break;
+ }
+
+ stop_signal = w.value.sig;
+
+ stop_pc = read_pc_pid (pid);
+
+ /* See if a thread hit a thread-specific breakpoint that was meant for
+ another thread. If so, then step that thread past the breakpoint,
+ and continue it. */
+
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ {
+#ifdef NO_SINGLE_STEP
+ if (one_stepped)
+ random_signal = 0;
+ else
+#endif
+ if (breakpoints_inserted
+ && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
+ {
+ random_signal = 0;
+ if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK, pid))
+ {
+ /* Saw a breakpoint, but it was hit by the wrong thread. Just continue. */
+ write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, pid);
+
+ remove_breakpoints ();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+ /* FIXME: What if a signal arrives instead of the single-step
+ happening? */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+
+ /* We need to restart all the threads now. */
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ }
+ }
else
+ random_signal = 1;
+
+ /* See if something interesting happened to the non-current thread. If
+ so, then switch to that thread, and eventually give control back to
+ the user. */
+
+ if (pid != inferior_pid)
+ {
+ int printed = 0;
+
+ /* If it's a random signal for a non-current thread, notify user
+ if he's expressed an interest. */
+
+ if (random_signal
+ && signal_print[stop_signal])
+ {
+ printed = 1;
+ target_terminal_ours_for_output ();
+ printf_filtered ("\nProgram received signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+ gdb_flush (gdb_stdout);
+ }
+
+ /* If it's not SIGTRAP and not a signal we want to stop for, then
+ continue the thread. */
+
+ if (stop_signal != TARGET_SIGNAL_TRAP
+ && !signal_stop[stop_signal])
+ {
+ if (printed)
+ target_terminal_inferior ();
+
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
+
+ target_resume (pid, 0, stop_signal);
+ continue;
+ }
+
+ /* It's a SIGTRAP or a signal we're interested in. Switch threads,
+ and fall into the rest of wait_for_inferior(). */
+
+ /* Save infrun state for the old thread. */
+ save_infrun_state (inferior_pid, prev_pc,
+ prev_func_start, prev_func_name,
+ trap_expected, step_resume_breakpoint,
+ through_sigtramp_breakpoint,
+ step_range_start, step_range_end,
+ step_frame_address, handling_longjmp,
+ another_trap);
+
+ inferior_pid = pid;
+
+ /* Load infrun state for the new thread. */
+ load_infrun_state (inferior_pid, &prev_pc,
+ &prev_func_start, &prev_func_name,
+ &trap_expected, &step_resume_breakpoint,
+ &through_sigtramp_breakpoint,
+ &step_range_start, &step_range_end,
+ &step_frame_address, &handling_longjmp,
+ &another_trap);
+ printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid));
+
+ flush_cached_frames ();
+ }
+
+#ifdef NO_SINGLE_STEP
+ if (one_stepped)
+ single_step (0); /* This actually cleans up the ss */
+#endif /* NO_SINGLE_STEP */
+
+ /* If PC is pointing at a nullified instruction, then step beyond
+ it so that the user won't be confused when GDB appears to be ready
+ to execute it. */
+
+ if (INSTRUCTION_NULLIFIED)
+ {
+ struct target_waitstatus tmpstatus;
+
+ registers_changed ();
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+
+ /* We may have received a signal that we want to pass to
+ the inferior; therefore, we must not clobber the waitstatus
+ in W. So we call wait ourselves, then continue the loop
+ at the "have_waited" label. */
+ if (target_wait_hook)
+ target_wait_hook (pid, &tmpstatus);
+ else
+ target_wait (pid, &tmpstatus);
+
+
+ goto have_waited;
+ }
+
+#ifdef HAVE_STEPPABLE_WATCHPOINT
+ /* It may not be necessary to disable the watchpoint to stop over
+ it. For example, the PA can (with some kernel cooperation)
+ single step over a watchpoint without disabling the watchpoint. */
+ if (STOPPED_BY_WATCHPOINT (w))
+ {
+ resume (1, 0);
+ continue;
+ }
+#endif
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+ /* It is far more common to need to disable a watchpoint
+ to step the inferior over it. FIXME. What else might
+ a debug register or page protection watchpoint scheme need
+ here? */
+ if (STOPPED_BY_WATCHPOINT (w))
{
- pid = wait (&w);
- if (pid != inferior_pid)
- continue;
+/* At this point, we are stopped at an instruction which has attempted to write
+ to a piece of memory under control of a watchpoint. The instruction hasn't
+ actually executed yet. If we were to evaluate the watchpoint expression
+ now, we would get the old value, and therefore no change would seem to have
+ occurred.
+
+ In order to make watchpoints work `right', we really need to complete the
+ memory write, and then evaluate the watchpoint expression. The following
+ code does that by removing the watchpoint (actually, all watchpoints and
+ breakpoints), single-stepping the target, re-inserting watchpoints, and then
+ falling through to let normal single-step processing handle proceed. Since
+ this includes evaluating watchpoints, things will come to a stop in the
+ correct manner. */
+
+ write_pc (stop_pc - DECR_PC_AFTER_BREAK);
+
+ remove_breakpoints ();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+ /* FIXME-maybe: is this cleaner than setting a flag? Does it
+ handle things like signals arriving and other things happening
+ in combination correctly? */
+ goto have_waited;
}
+#endif
+
+#ifdef HAVE_CONTINUABLE_WATCHPOINT
+ /* It may be possible to simply continue after a watchpoint. */
+ STOPPED_BY_WATCHPOINT (w);
+#endif
- pc_changed = 0;
- fetch_inferior_registers ();
- stop_pc = read_pc ();
- set_current_frame (read_register (FP_REGNUM));
- stop_frame = get_current_frame ();
- stop_sp = read_register (SP_REGNUM);
+ stop_func_start = 0;
+ stop_func_name = 0;
+ /* Don't care about return value; stop_func_start and stop_func_name
+ will both be 0 if it doesn't work. */
+ find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
+ &stop_func_end);
+ stop_func_start += FUNCTION_START_OFFSET;
another_trap = 0;
- stop_breakpoint = 0;
+ bpstat_clear (&stop_bpstat);
stop_step = 0;
stop_stack_dummy = 0;
stop_print_frame = 1;
- stop_step_resume_break = 0;
random_signal = 0;
+ stopped_by_random_signal = 0;
breakpoints_failed = 0;
-
+
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
1) break; to really stop and return to the debugger,
2) drop through to start up again
- (set another_trap to 1 to single step once)
- 3) set random_signal to 1, and the decision between 1 and 2
- will be made according to the signal handling tables. */
-
- if (WIFEXITED (w))
+ (set another_trap to 1 to single step once)
+ 3) set random_signal to 1, and the decision between 1 and 2
+ will be made according to the signal handling tables. */
+
+ /* First, distinguish signals caused by the debugger from signals
+ that have to do with the program's own actions.
+ Note that breakpoint insns may cause SIGTRAP or SIGILL
+ or SIGEMT, depending on the operating system version.
+ Here we detect when a SIGILL or SIGEMT is really a breakpoint
+ and change it to SIGTRAP. */
+
+ if (stop_signal == TARGET_SIGNAL_TRAP
+ || (breakpoints_inserted &&
+ (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_EMT
+ ))
+ || stop_soon_quietly)
{
- terminal_ours_for_output ();
- if (WRETCODE (w))
- printf ("\nProgram exited with code 0%o.\n", WRETCODE (w));
+ if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
+ {
+ stop_print_frame = 0;
+ break;
+ }
+ if (stop_soon_quietly)
+ break;
+
+ /* Don't even think about breakpoints
+ if just proceeded over a breakpoint.
+
+ However, if we are trying to proceed over a breakpoint
+ and end up in sigtramp, then through_sigtramp_breakpoint
+ will be set and we should check whether we've hit the
+ step breakpoint. */
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
+ && through_sigtramp_breakpoint == NULL)
+ bpstat_clear (&stop_bpstat);
else
- printf ("\nProgram exited normally.\n");
- fflush (stdout);
- inferior_died ();
- stop_print_frame = 0;
- break;
- }
- else if (!WIFSTOPPED (w))
- {
- kill_inferior ();
- stop_print_frame = 0;
- stop_signal = WTERMSIG (w);
- terminal_ours_for_output ();
- printf ("\nProgram terminated with signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
- printf ("The inferior process no longer exists.\n");
- fflush (stdout);
- break;
- }
- else
- {
- stop_signal = WSTOPSIG (w);
-
- /* First, distinguish signals caused by the debugger from signals
- that have to do with the program's own actions.
- Note that breakpoint insns may cause SIGTRAP or SIGILL
- or SIGEMT, depending on the operating system version.
- Here we detect when a SIGILL or SIGEMT is really a breakpoint
- and change it to SIGTRAP. */
-
- if (stop_signal == SIGTRAP
- || (breakpoints_inserted &&
- (stop_signal == SIGILL
- || stop_signal == SIGEMT))
- || stop_after_attach)
{
- if (stop_signal == SIGTRAP && stop_after_trap)
- {
- stop_print_frame = 0;
- break;
- }
- if (stop_after_attach)
- break;
- /* Don't even think about breakpoints
- if still running the shell that will exec the program
- or if just proceeded over a breakpoint. */
- if (stop_signal == SIGTRAP && trap_expected)
- stop_breakpoint = 0;
- else
- /* See if there is a breakpoint at the current PC. */
+ /* See if there is a breakpoint at the current PC. */
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
#if DECR_PC_AFTER_BREAK
- /* Notice the case of stepping through a jump
- that leads just after a breakpoint.
- Don't confuse that with hitting the breakpoint.
- What we check for is that 1) stepping is going on
- and 2) the pc before the last insn does not match
- the address of the breakpoint before the current pc. */
- if (!(prev_pc != stop_pc - DECR_PC_AFTER_BREAK
- && step_range_end && !step_resume_break_address))
-#endif /* DECR_PC_AFTER_BREAK not zero */
- {
- select_frame (stop_frame, 0); /* For condition exprs. */
- stop_breakpoint = breakpoint_stop_status (stop_pc, stop_frame);
- /* Following in case break condition called a function. */
- stop_print_frame = 1;
- if (stop_breakpoint && DECR_PC_AFTER_BREAK)
- {
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
- pc_changed = 0;
- }
- }
- /* See if we stopped at the special breakpoint for
- stepping over a subroutine call. */
- if (stop_pc - DECR_PC_AFTER_BREAK == step_resume_break_address)
- {
- stop_step_resume_break = 1;
- if (DECR_PC_AFTER_BREAK)
- {
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
- pc_changed = 0;
- }
- }
-
- if (stop_signal == SIGTRAP)
- random_signal
- = !(stop_breakpoint || trap_expected
- || stop_step_resume_break
- || (stop_sp INNER_THAN stop_pc && stop_pc INNER_THAN stop_frame)
- || (step_range_end && !step_resume_break_address));
- else
- {
- random_signal
- = !(stop_breakpoint || stop_step_resume_break);
- if (!random_signal)
- stop_signal = SIGTRAP;
- }
+ /* Notice the case of stepping through a jump
+ that lands just after a breakpoint.
+ Don't confuse that with hitting the breakpoint.
+ What we check for is that 1) stepping is going on
+ and 2) the pc before the last insn does not match
+ the address of the breakpoint before the current pc. */
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ /* Following in case break condition called a
+ function. */
+ stop_print_frame = 1;
}
+
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ random_signal
+ = !(bpstat_explains_signal (stop_bpstat)
+ || trap_expected
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+ || (step_range_end && step_resume_breakpoint == NULL));
else
- random_signal = 1;
+ {
+ random_signal
+ = !(bpstat_explains_signal (stop_bpstat)
+ /* End of a stack dummy. Some systems (e.g. Sony
+ news) give another signal besides SIGTRAP,
+ so check here as well as above. */
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+ );
+ if (!random_signal)
+ stop_signal = TARGET_SIGNAL_TRAP;
+ }
+ }
+ else
+ random_signal = 1;
- /* For the program's own signals, act according to
- the signal handling tables. */
+ /* For the program's own signals, act according to
+ the signal handling tables. */
- if (random_signal
- && !(running_in_shell && stop_signal == SIGSEGV))
+ if (random_signal)
+ {
+ /* Signal not for debugging purposes. */
+ int printed = 0;
+
+ stopped_by_random_signal = 1;
+
+ if (signal_print[stop_signal])
{
- /* Signal not for debugging purposes. */
- int printed = 0;
-
- if (stop_signal >= NSIG
- || signal_print[stop_signal])
- {
- printed = 1;
- terminal_ours_for_output ();
- printf ("\nProgram received signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
- fflush (stdout);
- }
- if (stop_signal >= NSIG
- || signal_stop[stop_signal])
- break;
- /* If not going to stop, give terminal back
- if we took it away. */
- else if (printed)
- terminal_inferior ();
+ printed = 1;
+ target_terminal_ours_for_output ();
+ annotate_signal ();
+ printf_filtered ("\nProgram received signal ");
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+ gdb_flush (gdb_stdout);
}
+ if (signal_stop[stop_signal])
+ break;
+ /* If not going to stop, give terminal back
+ if we took it away. */
+ else if (printed)
+ target_terminal_inferior ();
+
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
+
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+ }
+
+ /* Handle cases caused by hitting a breakpoint. */
+ {
+ CORE_ADDR jmp_buf_pc;
+ struct bpstat_what what;
+
+ what = bpstat_what (stop_bpstat);
+
+ if (what.call_dummy)
+ {
+ stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 1;
+#endif
+ }
+
+ switch (what.main_action)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp, disable it for the
+ duration of this command. Then, install a temporary
+ breakpoint at the target of the jmp_buf. */
+ disable_longjmp_breakpoint();
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
+
+ /* Need to blow away step-resume breakpoint, as it
+ interferes with us */
+ if (step_resume_breakpoint != NULL)
+ {
+ delete_breakpoint (step_resume_breakpoint);
+ step_resume_breakpoint = NULL;
+ }
+ /* Not sure whether we need to blow this away too, but probably
+ it is like the step-resume breakpoint. */
+ if (through_sigtramp_breakpoint != NULL)
+ {
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
+ }
+
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls > 0)
+ set_longjmp_resume_breakpoint(jmp_buf_pc,
+ get_current_frame());
+ else
+#endif /* 0 */
+ set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
+ handling_longjmp = 1; /* FIXME */
+ goto keep_going;
+
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls
+ && (FRAME_FP (get_current_frame ())
+ INNER_THAN step_frame_address))
+ {
+ another_trap = 1;
+ goto keep_going;
+ }
+#endif /* 0 */
+ disable_longjmp_breakpoint();
+ handling_longjmp = 0; /* FIXME */
+ if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
+ break;
+ /* else fallthrough */
+
+ case BPSTAT_WHAT_SINGLE:
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ another_trap = 1;
+ /* Still need to check other stuff, at least the case
+ where we are stepping and step out of the right range. */
+ break;
- /* Handle cases caused by hitting a breakpoint. */
+ case BPSTAT_WHAT_STOP_NOISY:
+ stop_print_frame = 1;
- if (!random_signal
- && (stop_breakpoint || stop_step_resume_break))
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STOP_SILENT:
+ stop_print_frame = 0;
+
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STEP_RESUME:
+ delete_breakpoint (step_resume_breakpoint);
+ step_resume_breakpoint = NULL;
+ break;
+
+ case BPSTAT_WHAT_THROUGH_SIGTRAMP:
+ if (through_sigtramp_breakpoint)
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
+
+ /* If were waiting for a trap, hitting the step_resume_break
+ doesn't count as getting it. */
+ if (trap_expected)
+ another_trap = 1;
+ break;
+
+#ifdef SOLIB_ADD
+ case BPSTAT_WHAT_CHECK_SHLIBS:
{
- /* Does a breakpoint want us to stop? */
- if (stop_breakpoint && stop_breakpoint != -1)
+ extern int auto_solib_add;
+
+ /* Remove breakpoints, we eventually want to step over the
+ shlib event breakpoint, and SOLIB_ADD might adjust
+ breakpoint addresses via breakpoint_re_set. */
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+
+ /* Check for any newly added shared libraries if we're
+ supposed to be adding them automatically. */
+ if (auto_solib_add)
{
- /* 0x1000000 is set in stop_breakpoint as returned by
- breakpoint_status_p to indicate a silent breakpoint. */
- if (stop_breakpoint > 0 && stop_breakpoint & 0x1000000)
- {
- stop_breakpoint &= ~0x1000000;
- stop_print_frame = 0;
- }
- break;
+ /* Switch terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL);
+ re_enable_breakpoints_in_shlibs ();
+ target_terminal_inferior ();
}
- /* But if we have hit the step-resumption breakpoint,
- remove it. It has done its job getting us here. */
- if (stop_step_resume_break
- && (step_frame == 0 || stop_frame == step_frame))
+
+ /* If requested, stop when the dynamic linker notifies
+ gdb of events. This allows the user to get control
+ and place breakpoints in initializer routines for
+ dynamically loaded objects (among other things). */
+ if (stop_on_solib_events)
{
- remove_step_breakpoint ();
- step_resume_break_address = 0;
+ stop_print_frame = 0;
+ goto stop_stepping;
}
- /* Otherwise, must remove breakpoints and single-step
- to get us past the one we hit. */
else
{
- remove_breakpoints ();
- remove_step_breakpoint ();
- breakpoints_inserted = 0;
+ /* We want to step over this breakpoint, then keep going. */
another_trap = 1;
+ break;
}
-
- /* We come here if we hit a breakpoint but should not
- stop for it. Possibly we also were stepping
- and should stop for that. So fall through and
- test for stepping. But, if not stepping,
- do not stop. */
}
+#endif
- /* If this is the breakpoint at the end of a stack dummy,
- just stop silently. */
- if (stop_sp INNER_THAN stop_pc && stop_pc INNER_THAN stop_frame)
- {
- stop_print_frame = 0;
- stop_stack_dummy = 1;
-#ifdef HP9K320
- trap_expected_after_continue = 1;
+ case BPSTAT_WHAT_LAST:
+ /* Not a real code, but listed here to shut up gcc -Wall. */
+
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
+ }
+ }
+
+ /* We come here if we hit a breakpoint but should not
+ stop for it. Possibly we also were stepping
+ and should stop for that. So fall through and
+ test for stepping. But, if not stepping,
+ do not stop. */
+
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ /* This is the old way of detecting the end of the stack dummy.
+ An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets
+ handled above. As soon as we can test it on all of them, all
+ architectures should define it. */
+
+ /* If this is the breakpoint at the end of a stack dummy,
+ just stop silently, unless the user was doing an si/ni, in which
+ case she'd better know what she's doing. */
+
+ if (PC_IN_CALL_DUMMY (stop_pc, read_sp (), FRAME_FP (get_current_frame ()))
+ && !step_range_end)
+ {
+ stop_print_frame = 0;
+ stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 1;
#endif
+ break;
+ }
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+
+ if (step_resume_breakpoint)
+ /* Having a step-resume breakpoint overrides anything
+ else having to do with stepping commands until
+ that breakpoint is reached. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+
+ if (step_range_end == 0)
+ /* Likewise if we aren't even stepping. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+
+ /* If stepping through a line, keep going if still within it. */
+ if (stop_pc >= step_range_start
+ && stop_pc < step_range_end
+#if 0
+/* I haven't a clue what might trigger this clause, and it seems wrong anyway,
+ so I've disabled it until someone complains. -Stu 10/24/95 */
+
+ /* The step range might include the start of the
+ function, so if we are at the start of the
+ step range and either the stack or frame pointers
+ just changed, we've stepped outside */
+ && !(stop_pc == step_range_start
+ && FRAME_FP (get_current_frame ())
+ && (read_sp () INNER_THAN step_sp
+ || FRAME_FP (get_current_frame ()) != step_frame_address))
+#endif
+)
+ {
+ /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
+ So definately need to check for sigtramp here. */
+ goto check_sigtramp2;
+ }
+
+ /* We stepped out of the stepping range. */
+
+ /* We can't update step_sp every time through the loop, because
+ reading the stack pointer would slow down stepping too much.
+ But we can update it every time we leave the step range. */
+ update_step_sp = 1;
+
+ /* Did we just take a signal? */
+ if (IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ {
+ /* We've just taken a signal; go until we are back to
+ the point where we took it and one more. */
+
+ /* This code is needed at least in the following case:
+ The user types "next" and then a signal arrives (before
+ the "next" is done). */
+
+ /* Note that if we are stopped at a breakpoint, then we need
+ the step_resume breakpoint to override any breakpoints at
+ the same location, so that we will still step over the
+ breakpoint even though the signal happened. */
+
+ {
+ struct symtab_and_line sr_sal;
+
+ sr_sal.pc = prev_pc;
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ /* We could probably be setting the frame to
+ step_frame_address; I don't think anyone thought to try it. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+
+ /* If this is stepi or nexti, make sure that the stepping range
+ gets us past that instruction. */
+ if (step_range_end == 1)
+ /* FIXME: Does this run afoul of the code below which, if
+ we step into the middle of a line, resets the stepping
+ range? */
+ step_range_end = (step_range_start = prev_pc) + 1;
+
+ remove_breakpoints_on_following_step = 1;
+ goto keep_going;
+ }
+
+#if 0
+ /* I disabled this test because it was too complicated and slow. The
+ SKIP_PROLOGUE was especially slow, because it caused unnecessary
+ prologue examination on various architectures. The code in the #else
+ clause has been tested on the Sparc, Mips, PA, and Power
+ architectures, so it's pretty likely to be correct. -Stu 10/24/95 */
+
+ /* See if we left the step range due to a subroutine call that
+ we should proceed to the end of. */
+
+ if (stop_func_start)
+ {
+ struct symtab *s;
+
+ /* Do this after the IN_SIGTRAMP check; it might give
+ an error. */
+ prologue_pc = stop_func_start;
+
+ /* Don't skip the prologue if this is assembly source */
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (prologue_pc);
+ }
+
+ if ((/* Might be a non-recursive call. If the symbols are missing
+ enough that stop_func_start == prev_func_start even though
+ they are really two functions, we will treat some calls as
+ jumps. */
+ stop_func_start != prev_func_start
+
+ /* Might be a recursive call if either we have a prologue
+ or the call instruction itself saves the PC on the stack. */
+ || prologue_pc != stop_func_start
+ || read_sp () != step_sp)
+ && (/* PC is completely out of bounds of any known objfiles. Treat
+ like a subroutine call. */
+ ! stop_func_start
+
+ /* If we do a call, we will be at the start of a function... */
+ || stop_pc == stop_func_start
+
+ /* ...except on the Alpha with -O (and also Irix 5 and
+ perhaps others), in which we might call the address
+ after the load of gp. Since prologues don't contain
+ calls, we can't return to within one, and we don't
+ jump back into them, so this check is OK. */
+
+ || stop_pc < prologue_pc
+
+ /* ...and if it is a leaf function, the prologue might
+ consist of gp loading only, so the call transfers to
+ the first instruction after the prologue. */
+ || (stop_pc == prologue_pc
+
+ /* Distinguish this from the case where we jump back
+ to the first instruction after the prologue,
+ within a function. */
+ && stop_func_start != prev_func_start)
+
+ /* If we end up in certain places, it means we did a subroutine
+ call. I'm not completely sure this is necessary now that we
+ have the above checks with stop_func_start (and now that
+ find_pc_partial_function is pickier). */
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+
+ /* If none of the above apply, it is a jump within a function,
+ or a return from a subroutine. The other case is longjmp,
+ which can no longer happen here as long as the
+ handling_longjmp stuff is working. */
+ ))
+#else
+ /* This test is a much more streamlined, (but hopefully correct)
+ replacement for the code above. It's been tested on the Sparc,
+ Mips, PA, and Power architectures with good results. */
+
+ if (stop_pc == stop_func_start /* Quick test */
+ || in_prologue (stop_pc, stop_func_start)
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+ || stop_func_start == 0)
+#endif
+
+ {
+ /* It's a subroutine call. */
+
+ if (step_over_calls == 0)
+ {
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ stop_step = 1;
break;
}
- if (step_resume_break_address)
- /* Having a step-resume breakpoint overrides anything
- else having to do with stepping commands until
- that breakpoint is reached. */
- ;
- /* If stepping through a line, keep going if still within it. */
- else if (!random_signal
- && step_range_end
- && stop_pc >= step_range_start
- && stop_pc < step_range_end)
+ if (step_over_calls > 0)
+ /* We're doing a "next". */
+ goto step_over_function;
+
+ /* If we are in a function call trampoline (a stub between
+ the calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to
+ the end of, if we do step into it. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (tmp != 0)
+ stop_func_start = tmp;
+ else
{
- /* Don't step through the return from a function
- unless that is the first instruction stepped through. */
- if (ABOUT_TO_RETURN (stop_pc))
+ tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc);
+ if (tmp)
{
- stop_step = 1;
- break;
+ struct symtab_and_line xxx;
+
+ xxx.pc = tmp;
+ xxx.symtab = NULL;
+ xxx.line = 0;
+ step_resume_breakpoint =
+ set_momentary_breakpoint (xxx, NULL, bp_step_resume);
+ insert_breakpoints ();
+ goto keep_going;
}
}
- /* We stepped out of the stepping range. See if that was due
- to a subroutine call that we should proceed to the end of. */
- else if (!random_signal && step_range_end)
+ /* If we have line number information for the function we
+ are thinking of stepping into, step into it.
+
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
+ {
+ struct symtab_and_line tmp_sal;
+
+ tmp_sal = find_pc_line (stop_func_start, 0);
+ if (tmp_sal.line != 0)
+ goto step_into_function;
+ }
+
+step_over_function:
+ /* A subroutine call has happened. */
+ {
+ /* Set a special breakpoint after the return */
+ struct symtab_and_line sr_sal;
+ sr_sal.pc =
+ ADDR_BITS_REMOVE
+ (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, get_current_frame (),
+ bp_step_resume);
+ step_resume_breakpoint->frame = step_frame_address;
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+ goto keep_going;
+
+step_into_function:
+ /* Subroutine call with source code we should not step over.
+ Do step to the first line of code in it. */
+ {
+ struct symtab *s;
+
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (stop_func_start);
+ }
+ sal = find_pc_line (stop_func_start, 0);
+ /* Use the step_resume_break to step until
+ the end of the prologue, even if that involves jumps
+ (as it seems to on the vax under 4.2). */
+ /* If the prologue ends in the middle of a source line,
+ continue to the end of that source line (if it is still
+ within the function). Otherwise, just go to end of prologue. */
+#ifdef PROLOGUE_FIRSTLINE_OVERLAP
+ /* no, don't either. It skips any code that's
+ legitimately on the first line. */
+#else
+ if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end)
+ stop_func_start = sal.end;
+#endif
+
+ if (stop_func_start == stop_pc)
{
- newfun = find_pc_function (stop_pc);
- newmisc = -1;
- if (newfun)
- {
- newfun_pc = BLOCK_START (SYMBOL_BLOCK_VALUE (newfun))
- + FUNCTION_START_OFFSET;
- }
- else
- {
- newmisc = find_pc_misc_function (stop_pc);
- if (newmisc >= 0)
- newfun_pc = misc_function_vector[newmisc].address
- + FUNCTION_START_OFFSET;
- else newfun_pc = 0;
- }
- if (stop_pc == newfun_pc
- && (step_over_calls > 0 || (step_over_calls && newfun == 0)))
- {
- /* A subroutine call has happened. */
- /* Set a special breakpoint after the return */
- step_resume_break_address = SAVED_PC_AFTER_CALL (stop_frame);
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- }
- /* Subroutine call with source code we should not step over.
- Do step to the first line of code in it. */
- else if (stop_pc == newfun_pc && step_over_calls)
- {
- SKIP_PROLOGUE (newfun_pc);
- sal = find_pc_line (newfun_pc, 0);
- /* Use the step_resume_break to step until
- the end of the prologue, even if that involves jumps
- (as it seems to on the vax under 4.2). */
- /* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
- if (sal.end && sal.pc != newfun_pc)
- newfun_pc = sal.end;
-
- if (newfun_pc == stop_pc)
- /* We are already there: stop now. */
- stop_step = 1;
- else
- /* Put the step-breakpoint there and go until there. */
- {
- step_resume_break_address = newfun_pc;
-
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- step_frame = 0;
- /* And make sure stepping stops right away then. */
- step_range_end = step_range_start;
- }
- }
- /* No subroutince call; stop now. */
- else
- {
- stop_step = 1;
- break;
- }
+ /* We are already there: stop now. */
+ stop_step = 1;
+ break;
}
+ else
+ /* Put the step-breakpoint there and go until there. */
+ {
+ struct symtab_and_line sr_sal;
+
+ sr_sal.pc = stop_func_start;
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* And make sure stepping stops right away then. */
+ step_range_end = step_range_start;
+ }
+ goto keep_going;
}
- /* Save the pc before execution, to compare with pc after stop. */
- prev_pc = read_pc ();
+ /* We've wandered out of the step range. */
- /* If we did not do break;, it means we should keep
- running the inferior and not return to debugger. */
+ sal = find_pc_line(stop_pc, 0);
- /* If trap_expected is 2, it means continue once more
- and insert breakpoints at the next trap.
- If trap_expected is 1 and the signal was SIGSEGV, it means
- the shell is doing some memory allocation--just resume it
- with SIGSEGV.
- Otherwise insert breakpoints now, and possibly single step. */
+ if (step_range_end == 1)
+ {
+ /* It is stepi or nexti. We always want to stop stepping after
+ one instruction. */
+ stop_step = 1;
+ break;
+ }
- if (trap_expected > 1)
+ /* If we're in the return path from a shared library trampoline,
+ we want to proceed through the trampoline when stepping. */
+ if (IN_SOLIB_RETURN_TRAMPOLINE(stop_pc, stop_func_name))
+ {
+ CORE_ADDR tmp;
+
+ /* Determine where this trampoline returns. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+
+ /* Only proceed through if we know where it's going. */
+ if (tmp)
+ {
+ /* And put the step-breakpoint there and go until there. */
+ struct symtab_and_line sr_sal;
+
+ sr_sal.pc = tmp;
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* Restart without fiddling with the step ranges or
+ other state. */
+ goto keep_going;
+ }
+ }
+
+ if (sal.line == 0)
{
- trap_expected--;
- running_in_shell = 1;
- resume (0, 0);
+ /* We have no line number information. That means to stop
+ stepping (does this always happen right after one instruction,
+ when we do "s" in a function with no line numbers,
+ or can this happen as a result of a return or longjmp?). */
+ stop_step = 1;
+ break;
}
- else if (running_in_shell && stop_signal == SIGSEGV)
+
+ if (stop_pc == sal.pc
+ && (current_line != sal.line || current_symtab != sal.symtab))
{
- resume (0, SIGSEGV);
+ /* We are at the start of a different line. So stop. Note that
+ we don't stop if we step into the middle of a different line.
+ That is said to make things like for (;;) statements work
+ better. */
+ stop_step = 1;
+ break;
+ }
+
+ /* We aren't done stepping.
+
+ Optimize by setting the stepping range to the line.
+ (We might not be in the original line, but if we entered a
+ new line in mid-statement, we continue stepping. This makes
+ things like for(;;) statements work better.) */
+
+ if (stop_func_end && sal.end >= stop_func_end)
+ {
+ /* If this is the last line of the function, don't keep stepping
+ (it would probably step us out of the function).
+ This is particularly necessary for a one-line function,
+ in which after skipping the prologue we better stop even though
+ we will be in mid-line. */
+ stop_step = 1;
+ break;
+ }
+ step_range_start = sal.pc;
+ step_range_end = sal.end;
+ goto keep_going;
+
+ check_sigtramp2:
+ if (trap_expected
+ && IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ {
+ /* What has happened here is that we have just stepped the inferior
+ with a signal (because it is a signal which shouldn't make
+ us stop), thus stepping into sigtramp.
+
+ So we need to set a step_resume_break_address breakpoint
+ and continue until we hit it, and then step. FIXME: This should
+ be more enduring than a step_resume breakpoint; we should know
+ that we will later need to keep going rather than re-hitting
+ the breakpoint here (see testsuite/gdb.t06/signals.exp where
+ it says "exceedingly difficult"). */
+ struct symtab_and_line sr_sal;
+
+ sr_sal.pc = prev_pc;
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ /* We perhaps could set the frame if we kept track of what
+ the frame corresponding to prev_pc was. But we don't,
+ so don't. */
+ through_sigtramp_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ remove_breakpoints_on_following_step = 1;
+ another_trap = 1;
+ }
+
+ keep_going:
+ /* Come to this label when you need to resume the inferior.
+ It's really much cleaner to do a goto than a maze of if-else
+ conditions. */
+
+ /* Save the pc before execution, to compare with pc after stop. */
+ prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
+ prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER
+ BREAK is defined, the
+ original pc would not have
+ been at the start of a
+ function. */
+ prev_func_name = stop_func_name;
+
+ if (update_step_sp)
+ step_sp = read_sp ();
+ update_step_sp = 0;
+
+ /* If we did not do break;, it means we should keep
+ running the inferior and not return to debugger. */
+
+ if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
+ {
+ /* We took a signal (which we are supposed to pass through to
+ the inferior, else we'd have done a break above) and we
+ haven't yet gotten our trap. Simply continue. */
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
else
{
- /* Here, we are not awaiting another exec to get
- the program we really want to debug.
+ /* Either the trap was not expected, but we are continuing
+ anyway (the user asked that this signal be passed to the
+ child)
+ -- or --
+ The signal was SIGTRAP, e.g. it was our signal, but we
+ decided we should resume from it.
+
+ We're going to run this baby now!
+
Insert breakpoints now, unless we are trying
to one-proceed past a breakpoint. */
- running_in_shell = 0;
- if (!breakpoints_inserted && !another_trap)
+ /* If we've just finished a special step resume and we don't
+ want to hit a breakpoint, pull em out. */
+ if (step_resume_breakpoint == NULL
+ && through_sigtramp_breakpoint == NULL
+ && remove_breakpoints_on_following_step)
+ {
+ remove_breakpoints_on_following_step = 0;
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ }
+ else if (!breakpoints_inserted &&
+ (through_sigtramp_breakpoint != NULL || !another_trap))
{
- insert_step_breakpoint ();
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
break;
trap_expected = another_trap;
- if (stop_signal == SIGTRAP)
- stop_signal = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ stop_signal = TARGET_SIGNAL_0;
+
+#ifdef SHIFT_INST_REGS
+ /* I'm not sure when this following segment applies. I do know, now,
+ that we shouldn't rewrite the regs when we were stopped by a
+ random signal from the inferior process. */
+ /* FIXME: Shouldn't this be based on the valid bit of the SXIP?
+ (this is only used on the 88k). */
+
+ if (!bpstat_explains_signal (stop_bpstat)
+ && (stop_signal != TARGET_SIGNAL_CHLD)
+ && !stopped_by_random_signal)
+ SHIFT_INST_REGS();
+#endif /* SHIFT_INST_REGS */
- resume ((step_range_end && !step_resume_break_address)
- || trap_expected,
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
}
+
+ stop_stepping:
+ if (target_has_execution)
+ {
+ /* Assuming the inferior still exists, set these up for next
+ time, just like we did above if we didn't break out of the
+ loop. */
+ prev_pc = read_pc ();
+ prev_func_start = stop_func_start;
+ prev_func_name = stop_func_name;
+ }
+ do_cleanups (old_cleanups);
}
\f
/* Here to return control to GDB when the inferior stops for real.
Print appropriate messages, remove breakpoints, give terminal our modes.
- RUNNING_IN_SHELL nonzero means the shell got a signal before
- exec'ing the program we wanted to run.
STOP_PRINT_FRAME nonzero means print the executing frame
(pc, function, args, file, line number and line text).
BREAKPOINTS_FAILED nonzero means stop was due to error
attempting to insert breakpoints. */
-static void
+void
normal_stop ()
{
+ /* Make sure that the current_frame's pc is correct. This
+ is a correction for setting up the frame info before doing
+ DECR_PC_AFTER_BREAK */
+ if (target_has_execution && get_current_frame())
+ (get_current_frame ())->pc = read_pc ();
+
if (breakpoints_failed)
{
- terminal_ours_for_output ();
+ target_terminal_ours_for_output ();
print_sys_errmsg ("ptrace", breakpoints_failed);
- printf ("Stopped; cannot insert breakpoints.\n\
+ printf_filtered ("Stopped; cannot insert breakpoints.\n\
The same program may be running in another process.\n");
}
- if (inferior_pid)
- remove_step_breakpoint ();
-
- if (inferior_pid && breakpoints_inserted)
+ if (target_has_execution && breakpoints_inserted)
if (remove_breakpoints ())
{
- terminal_ours_for_output ();
- printf ("Cannot remove breakpoints because program is no longer writable.\n\
-It must be running in another process.\n\
+ target_terminal_ours_for_output ();
+ printf_filtered ("Cannot remove breakpoints because program is no longer writable.\n\
+It might be running in another process.\n\
Further execution is probably impossible.\n");
}
/* Delete the breakpoint we stopped at, if it wants to be deleted.
Delete any breakpoint that is to be deleted at the next stop. */
- breakpoint_auto_delete (stop_breakpoint);
+ breakpoint_auto_delete (stop_bpstat);
/* If an auto-display called a function and that got a signal,
delete that auto-display to avoid an infinite recursion. */
- delete_current_display ();
+ if (stopped_by_random_signal)
+ disable_current_display ();
if (step_multi && stop_step)
- return;
+ goto done;
- terminal_ours ();
+ target_terminal_ours ();
- if (running_in_shell)
- {
- if (stop_signal == SIGSEGV)
- {
- char *exec_file = (char *) get_exec_file (1);
+ if (stop_bpstat
+ && stop_bpstat->breakpoint_at
+ && stop_bpstat->breakpoint_at->type == bp_shlib_event)
+ printf_filtered ("Stopped due to shared library event\n");
- if (access (exec_file, X_OK) != 0)
- printf ("The file \"%s\" is not executable.\n", exec_file);
- else
- printf ("\
-You have just encountered a bug in \"sh\". GDB starts your program\n\
-by running \"sh\" with a command to exec your program.\n\
-This is so that \"sh\" will process wildcards and I/O redirection.\n\
-This time, \"sh\" crashed.\n\
-\n\
-One known bug in \"sh\" bites when the environment takes up a lot of space.\n\
-Try \"info env\" to see the environment; then use \"unset-env\" to kill\n\
-some variables whose values are large; then do \"run\" again.\n\
-\n\
-If that works, you might want to put those \"unset-env\" commands\n\
-into a \".gdbinit\" file in this directory so they will happen every time.\n");
- }
- /* Don't confuse user with his program's symbols on sh's data. */
- stop_print_frame = 0;
+ /* Look up the hook_stop and run it if it exists. */
+
+ if (stop_command->hook)
+ {
+ catch_errors (hook_stop_stub, (char *)stop_command->hook,
+ "Error while running hook_stop:\n", RETURN_MASK_ALL);
}
- if (inferior_pid == 0)
- return;
+ if (!target_has_stack)
+ goto done;
/* Select innermost stack frame except on return from a stack dummy routine,
- or if the program has exited. */
+ or if the program has exited. Print it without a level number if
+ we have changed functions or hit a breakpoint. Print source line
+ if we have one. */
if (!stop_stack_dummy)
{
- select_frame (stop_frame, 0);
+ select_frame (get_current_frame (), 0);
if (stop_print_frame)
{
- if (stop_breakpoint > 0)
- printf ("\nBpt %d, ", stop_breakpoint);
- print_sel_frame (stop_step
- && step_frame == stop_frame
- && step_start_function == find_pc_function (stop_pc));
+ int source_only;
+
+ source_only = bpstat_print (stop_bpstat);
+ source_only = source_only ||
+ ( stop_step
+ && step_frame_address == FRAME_FP (get_current_frame ())
+ && step_start_function == find_pc_function (stop_pc));
+
+ print_stack_frame (selected_frame, -1, source_only? -1: 1);
+
/* Display the auto-display expressions. */
do_displays ();
}
}
- /* Save the function value return registers
+ /* Save the function value return registers, if we care.
We might be about to restore their previous contents. */
- read_register_bytes (0, stop_registers, REGISTER_BYTES);
+ if (proceed_to_finish)
+ read_register_bytes (0, stop_registers, REGISTER_BYTES);
if (stop_stack_dummy)
{
- /* Pop the empty frame that contains the stack dummy. */
+ /* Pop the empty frame that contains the stack dummy.
+ POP_FRAME ends with a setting of the current frame, so we
+ can use that next. */
POP_FRAME;
- select_frame (read_register (FP_REGNUM), 0);
+ /* Set stop_pc to what it was before we called the function. Can't rely
+ on restore_inferior_status because that only gets called if we don't
+ stop in the called function. */
+ stop_pc = read_pc();
+ select_frame (get_current_frame (), 0);
}
+ done:
+ annotate_stopped ();
+}
+
+static int
+hook_stop_stub (cmd)
+ char *cmd;
+{
+ execute_user_command ((struct cmd_list_element *)cmd, 0);
+ return (0);
}
\f
+int signal_stop_state (signo)
+ int signo;
+{
+ return signal_stop[signo];
+}
+
+int signal_print_state (signo)
+ int signo;
+{
+ return signal_print[signo];
+}
+
+int signal_pass_state (signo)
+ int signo;
+{
+ return signal_program[signo];
+}
+
static void
-insert_step_breakpoint ()
+sig_print_header ()
{
- if (step_resume_break_address && !step_resume_break_duplicate)
- {
- read_memory (step_resume_break_address,
- step_resume_break_shadow, sizeof break_insn);
- write_memory (step_resume_break_address,
- break_insn, sizeof break_insn);
- }
+ printf_filtered ("\
+Signal Stop\tPrint\tPass to program\tDescription\n");
}
static void
-remove_step_breakpoint ()
+sig_print_info (oursig)
+ enum target_signal oursig;
{
- if (step_resume_break_address && !step_resume_break_duplicate)
- write_memory (step_resume_break_address, step_resume_break_shadow,
- sizeof break_insn);
+ char *name = target_signal_to_name (oursig);
+ printf_filtered ("%s", name);
+ printf_filtered ("%*.*s ", 13 - strlen (name), 13 - strlen (name),
+ " ");
+ printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\n", target_signal_to_string (oursig));
}
-\f
+
/* Specify how various signals in the inferior should be handled. */
static void
char *args;
int from_tty;
{
- register char *p = args;
- int signum;
- register int digits, wordlen;
+ char **argv;
+ int digits, wordlen;
+ int sigfirst, signum, siglast;
+ enum target_signal oursig;
+ int allsigs;
+ int nsigs;
+ unsigned char *sigs;
+ struct cleanup *old_chain;
+
+ if (args == NULL)
+ {
+ error_no_arg ("signal to handle");
+ }
+
+ /* Allocate and zero an array of flags for which signals to handle. */
+
+ nsigs = (int)TARGET_SIGNAL_LAST;
+ sigs = (unsigned char *) alloca (nsigs);
+ memset (sigs, 0, nsigs);
- if (!args)
- error_no_arg ("signal to handle");
+ /* Break the command line up into args. */
- while (*p)
+ argv = buildargv (args);
+ if (argv == NULL)
{
- /* Find the end of the next word in the args. */
- for (wordlen = 0; p[wordlen] && p[wordlen] != ' ' && p[wordlen] != '\t';
- wordlen++);
- for (digits = 0; p[digits] >= '0' && p[digits] <= '9'; digits++);
+ nomem (0);
+ }
+ old_chain = make_cleanup (freeargv, (char *) argv);
+
+ /* Walk through the args, looking for signal oursigs, signal names, and
+ actions. Signal numbers and signal names may be interspersed with
+ actions, with the actions being performed for all signals cumulatively
+ specified. Signal ranges can be specified as <LOW>-<HIGH>. */
+
+ while (*argv != NULL)
+ {
+ wordlen = strlen (*argv);
+ for (digits = 0; isdigit ((*argv)[digits]); digits++) {;}
+ allsigs = 0;
+ sigfirst = siglast = -1;
- /* If it is all digits, it is signal number to operate on. */
- if (digits == wordlen)
+ if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
{
- signum = atoi (p);
- if (signum == SIGTRAP || signum == SIGINT)
- {
- if (!query ("Signal %d is used by the debugger.\nAre you sure you want to change it? ", signum))
- error ("Not confirmed.");
- }
+ /* Apply action to all signals except those used by the
+ debugger. Silently skip those. */
+ allsigs = 1;
+ sigfirst = 0;
+ siglast = nsigs - 1;
}
- else if (signum == 0)
- error ("First argument is not a signal number.");
-
- /* Else, if already got a signal number, look for flag words
- saying what to do for it. */
- else if (!strncmp (p, "stop", wordlen))
+ else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_stop);
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_print);
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
{
- signal_stop[signum] = 1;
- signal_print[signum] = 1;
+ UNSET_SIGS (nsigs, sigs, signal_program);
}
- else if (wordlen >= 2 && !strncmp (p, "print", wordlen))
- signal_print[signum] = 1;
- else if (wordlen >= 2 && !strncmp (p, "pass", wordlen))
- signal_program[signum] = 1;
- else if (!strncmp (p, "ignore", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "nostop", wordlen))
- signal_stop[signum] = 0;
- else if (wordlen >= 4 && !strncmp (p, "noprint", wordlen))
+ else if (digits > 0)
{
- signal_print[signum] = 0;
- signal_stop[signum] = 0;
+ /* It is numeric. The numeric signal refers to our own internal
+ signal numbering from target.h, not to host/target signal number.
+ This is a feature; users really should be using symbolic names
+ anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
+ will work right anyway. */
+
+ sigfirst = siglast = (int) target_signal_from_command (atoi (*argv));
+ if ((*argv)[digits] == '-')
+ {
+ siglast =
+ (int) target_signal_from_command (atoi ((*argv) + digits + 1));
+ }
+ if (sigfirst > siglast)
+ {
+ /* Bet he didn't figure we'd think of this case... */
+ signum = sigfirst;
+ sigfirst = siglast;
+ siglast = signum;
+ }
}
- else if (wordlen >= 4 && !strncmp (p, "nopass", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "noignore", wordlen))
- signal_program[signum] = 1;
- /* Not a number and not a recognized flag word => complain. */
else
{
- p[wordlen] = 0;
- error ("Unrecognized flag word: \"%s\".", p);
+ oursig = target_signal_from_name (*argv);
+ if (oursig != TARGET_SIGNAL_UNKNOWN)
+ {
+ sigfirst = siglast = (int)oursig;
+ }
+ else
+ {
+ /* Not a number and not a recognized flag word => complain. */
+ error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ }
+ }
+
+ /* If any signal numbers or symbol names were found, set flags for
+ which signals to apply actions to. */
+
+ for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
+ {
+ switch ((enum target_signal)signum)
+ {
+ case TARGET_SIGNAL_TRAP:
+ case TARGET_SIGNAL_INT:
+ if (!allsigs && !sigs[signum])
+ {
+ if (query ("%s is used by the debugger.\n\
+Are you sure you want to change it? ",
+ target_signal_to_name
+ ((enum target_signal)signum)))
+ {
+ sigs[signum] = 1;
+ }
+ else
+ {
+ printf_unfiltered ("Not confirmed, unchanged.\n");
+ gdb_flush (gdb_stdout);
+ }
+ }
+ break;
+ case TARGET_SIGNAL_0:
+ case TARGET_SIGNAL_DEFAULT:
+ case TARGET_SIGNAL_UNKNOWN:
+ /* Make sure that "all" doesn't print these. */
+ break;
+ default:
+ sigs[signum] = 1;
+ break;
+ }
}
- /* Find start of next word. */
- p += wordlen;
- while (*p == ' ' || *p == '\t') p++;
+ argv++;
}
+ target_notice_signals(inferior_pid);
+
if (from_tty)
{
/* Show the results. */
- printf ("Number\tStop\tPrint\tPass to program\tDescription\n");
- printf ("%d\t", signum);
- printf ("%s\t", signal_stop[signum] ? "Yes" : "No");
- printf ("%s\t", signal_print[signum] ? "Yes" : "No");
- printf ("%s\t\t", signal_program[signum] ? "Yes" : "No");
- printf ("%s\n", sys_siglist[signum]);
+ sig_print_header ();
+ for (signum = 0; signum < nsigs; signum++)
+ {
+ if (sigs[signum])
+ {
+ sig_print_info (signum);
+ }
+ }
}
+
+ do_cleanups (old_chain);
}
-/* Print current contents of the tables set by the handle command. */
+/* Print current contents of the tables set by the handle command.
+ It is possible we should just be printing signals actually used
+ by the current target (but for things to work right when switching
+ targets, all signals should be in the signal tables). */
static void
-signals_info (signum_exp)
+signals_info (signum_exp, from_tty)
char *signum_exp;
+ int from_tty;
{
- register int i;
- printf ("Number\tStop\tPrint\tPass to program\tDescription\n");
+ enum target_signal oursig;
+ sig_print_header ();
if (signum_exp)
{
- i = parse_and_eval_address (signum_exp);
- printf ("%d\t", i);
- printf ("%s\t", signal_stop[i] ? "Yes" : "No");
- printf ("%s\t", signal_print[i] ? "Yes" : "No");
- printf ("%s\t\t", signal_program[i] ? "Yes" : "No");
- printf ("%s\n", sys_siglist[i]);
+ /* First see if this is a symbol name. */
+ oursig = target_signal_from_name (signum_exp);
+ if (oursig == TARGET_SIGNAL_UNKNOWN)
+ {
+ /* No, try numeric. */
+ oursig =
+ target_signal_from_command (parse_and_eval_address (signum_exp));
+ }
+ sig_print_info (oursig);
return;
}
- printf ("\n");
- for (i = 0; i < NSIG; i++)
+ printf_filtered ("\n");
+ /* These ugly casts brought to you by the native VAX compiler. */
+ for (oursig = TARGET_SIGNAL_FIRST;
+ (int)oursig < (int)TARGET_SIGNAL_LAST;
+ oursig = (enum target_signal)((int)oursig + 1))
{
QUIT;
- if (i > 0 && i % 16 == 0)
- {
- printf ("[Type Return to see more]");
- fflush (stdout);
- read_line ();
- }
- printf ("%d\t", i);
- printf ("%s\t", signal_stop[i] ? "Yes" : "No");
- printf ("%s\t", signal_print[i] ? "Yes" : "No");
- printf ("%s\t\t", signal_program[i] ? "Yes" : "No");
- printf ("%s\n", sys_siglist[i]);
+
+ if (oursig != TARGET_SIGNAL_UNKNOWN
+ && oursig != TARGET_SIGNAL_DEFAULT
+ && oursig != TARGET_SIGNAL_0)
+ sig_print_info (oursig);
+ }
+
+ printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
+}
+\f
+/* Save all of the information associated with the inferior<==>gdb
+ connection. INF_STATUS is a pointer to a "struct inferior_status"
+ (defined in inferior.h). */
+
+void
+save_inferior_status (inf_status, restore_stack_info)
+ struct inferior_status *inf_status;
+ int restore_stack_info;
+{
+ inf_status->stop_signal = stop_signal;
+ inf_status->stop_pc = stop_pc;
+ inf_status->stop_step = stop_step;
+ inf_status->stop_stack_dummy = stop_stack_dummy;
+ inf_status->stopped_by_random_signal = stopped_by_random_signal;
+ inf_status->trap_expected = trap_expected;
+ inf_status->step_range_start = step_range_start;
+ inf_status->step_range_end = step_range_end;
+ inf_status->step_frame_address = step_frame_address;
+ inf_status->step_over_calls = step_over_calls;
+ inf_status->stop_after_trap = stop_after_trap;
+ inf_status->stop_soon_quietly = stop_soon_quietly;
+ /* Save original bpstat chain here; replace it with copy of chain.
+ If caller's caller is walking the chain, they'll be happier if we
+ hand them back the original chain when restore_i_s is called. */
+ inf_status->stop_bpstat = stop_bpstat;
+ stop_bpstat = bpstat_copy (stop_bpstat);
+ inf_status->breakpoint_proceeded = breakpoint_proceeded;
+ inf_status->restore_stack_info = restore_stack_info;
+ inf_status->proceed_to_finish = proceed_to_finish;
+
+ memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+
+ read_register_bytes (0, inf_status->registers, REGISTER_BYTES);
+
+ record_selected_frame (&(inf_status->selected_frame_address),
+ &(inf_status->selected_level));
+ return;
+}
+
+struct restore_selected_frame_args {
+ CORE_ADDR frame_address;
+ int level;
+};
+
+static int restore_selected_frame PARAMS ((char *));
+
+/* Restore the selected frame. args is really a struct
+ restore_selected_frame_args * (declared as char * for catch_errors)
+ telling us what frame to restore. Returns 1 for success, or 0 for
+ failure. An error message will have been printed on error. */
+
+static int
+restore_selected_frame (args)
+ char *args;
+{
+ struct restore_selected_frame_args *fr =
+ (struct restore_selected_frame_args *) args;
+ struct frame_info *frame;
+ int level = fr->level;
+
+ frame = find_relative_frame (get_current_frame (), &level);
+
+ /* If inf_status->selected_frame_address is NULL, there was no
+ previously selected frame. */
+ if (frame == NULL ||
+ FRAME_FP (frame) != fr->frame_address ||
+ level != 0)
+ {
+ warning ("Unable to restore previously selected frame.\n");
+ return 0;
}
+ select_frame (frame, fr->level);
+ return(1);
+}
- printf ("\nUse the \"handle\" command to change these tables.\n");
+void
+restore_inferior_status (inf_status)
+ struct inferior_status *inf_status;
+{
+ stop_signal = inf_status->stop_signal;
+ stop_pc = inf_status->stop_pc;
+ stop_step = inf_status->stop_step;
+ stop_stack_dummy = inf_status->stop_stack_dummy;
+ stopped_by_random_signal = inf_status->stopped_by_random_signal;
+ trap_expected = inf_status->trap_expected;
+ step_range_start = inf_status->step_range_start;
+ step_range_end = inf_status->step_range_end;
+ step_frame_address = inf_status->step_frame_address;
+ step_over_calls = inf_status->step_over_calls;
+ stop_after_trap = inf_status->stop_after_trap;
+ stop_soon_quietly = inf_status->stop_soon_quietly;
+ bpstat_clear (&stop_bpstat);
+ stop_bpstat = inf_status->stop_bpstat;
+ breakpoint_proceeded = inf_status->breakpoint_proceeded;
+ proceed_to_finish = inf_status->proceed_to_finish;
+
+ memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
+
+ /* The inferior can be gone if the user types "print exit(0)"
+ (and perhaps other times). */
+ if (target_has_execution)
+ write_register_bytes (0, inf_status->registers, REGISTER_BYTES);
+
+ /* The inferior can be gone if the user types "print exit(0)"
+ (and perhaps other times). */
+
+ /* FIXME: If we are being called after stopping in a function which
+ is called from gdb, we should not be trying to restore the
+ selected frame; it just prints a spurious error message (The
+ message is useful, however, in detecting bugs in gdb (like if gdb
+ clobbers the stack)). In fact, should we be restoring the
+ inferior status at all in that case? . */
+
+ if (target_has_stack && inf_status->restore_stack_info)
+ {
+ struct restore_selected_frame_args fr;
+ fr.level = inf_status->selected_level;
+ fr.frame_address = inf_status->selected_frame_address;
+ /* The point of catch_errors is that if the stack is clobbered,
+ walking the stack might encounter a garbage pointer and error()
+ trying to dereference it. */
+ if (catch_errors (restore_selected_frame, &fr,
+ "Unable to restore previously selected frame:\n",
+ RETURN_MASK_ERROR) == 0)
+ /* Error in restoring the selected frame. Select the innermost
+ frame. */
+ select_frame (get_current_frame (), 0);
+ }
}
+
\f
-static
-initialize ()
+void
+_initialize_infrun ()
{
register int i;
+ register int numsigs;
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
-Specify a signal number as argument to print info on that signal only.");
+Specify a signal as argument to print info on that signal only.");
+ add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command,
- "Specify how to handle a signal.\n\
-Args are signal number followed by flags.\n\
-Flags allowed are \"stop\", \"print\", \"pass\",\n\
- \"nostop\", \"noprint\" or \"nopass\".\n\
-Print means print a message if this signal happens.\n\
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
-Pass and Stop may be combined.");
-
- for (i = 0; i < NSIG; i++)
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+
+ stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
+ "There is no `stop' command, but you can set a hook on `stop'.\n\
+This allows you to set a list of commands to be run each time execution\n\
+of the program stops.", &cmdlist);
+
+ numsigs = (int)TARGET_SIGNAL_LAST;
+ signal_stop = (unsigned char *)
+ xmalloc (sizeof (signal_stop[0]) * numsigs);
+ signal_print = (unsigned char *)
+ xmalloc (sizeof (signal_print[0]) * numsigs);
+ signal_program = (unsigned char *)
+ xmalloc (sizeof (signal_program[0]) * numsigs);
+ for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
signal_print[i] = 1;
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
- signal_program[SIGTRAP] = 0;
- signal_program[SIGINT] = 0;
+ signal_program[TARGET_SIGNAL_TRAP] = 0;
+ signal_program[TARGET_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
-#ifdef SIGALRM
- signal_stop[SIGALRM] = 0;
- signal_print[SIGALRM] = 0;
-#endif /* SIGALRM */
-#ifdef SIGVTALRM
- signal_stop[SIGVTALRM] = 0;
- signal_print[SIGVTALRM] = 0;
-#endif /* SIGVTALRM */
-#ifdef SIGPROF
- signal_stop[SIGPROF] = 0;
- signal_print[SIGPROF] = 0;
-#endif /* SIGPROF */
-#ifdef SIGCHLD
- signal_stop[SIGCHLD] = 0;
- signal_print[SIGCHLD] = 0;
-#endif /* SIGCHLD */
-#ifdef SIGCLD
- signal_stop[SIGCLD] = 0;
- signal_print[SIGCLD] = 0;
-#endif /* SIGCLD */
-#ifdef SIGIO
- signal_stop[SIGIO] = 0;
- signal_print[SIGIO] = 0;
-#endif /* SIGIO */
-#ifdef SIGURG
- signal_stop[SIGURG] = 0;
- signal_print[SIGURG] = 0;
-#endif /* SIGURG */
+ signal_stop[TARGET_SIGNAL_ALRM] = 0;
+ signal_print[TARGET_SIGNAL_ALRM] = 0;
+ signal_stop[TARGET_SIGNAL_VTALRM] = 0;
+ signal_print[TARGET_SIGNAL_VTALRM] = 0;
+ signal_stop[TARGET_SIGNAL_PROF] = 0;
+ signal_print[TARGET_SIGNAL_PROF] = 0;
+ signal_stop[TARGET_SIGNAL_CHLD] = 0;
+ signal_print[TARGET_SIGNAL_CHLD] = 0;
+ signal_stop[TARGET_SIGNAL_IO] = 0;
+ signal_print[TARGET_SIGNAL_IO] = 0;
+ signal_stop[TARGET_SIGNAL_POLL] = 0;
+ signal_print[TARGET_SIGNAL_POLL] = 0;
+ signal_stop[TARGET_SIGNAL_URG] = 0;
+ signal_print[TARGET_SIGNAL_URG] = 0;
+
+#ifdef SOLIB_ADD
+ add_show_from_set
+ (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
+ (char *) &stop_on_solib_events,
+ "Set stopping for shared library events.\n\
+If nonzero, gdb will give control to the user when the dynamic linker\n\
+notifies gdb of shared library events. The most common event of interest\n\
+to the user would be loading/unloading of a new library.\n",
+ &setlist),
+ &showlist);
+#endif
}
-
-END_FILE