-/* Start (run) and stop the inferior process, for GDB.
- Copyright (C) 1986, 1987, 1988, 1989, 1991 Free Software Foundation, Inc.
+/* Target-struct-independent code to start (run) and stop an inferior process.
+ Copyright 1986, 87, 88, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-/* Notes on the algorithm used in wait_for_inferior to determine if we
- just did a subroutine call when stepping. We have the following
- information at that point:
-
- Current and previous (just before this step) pc.
- Current and previous sp.
- Current and previous start of current function.
-
- If the start's of the functions don't match, then
-
- a) We did a subroutine call.
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "frame.h"
+#include "inferior.h"
+#include "breakpoint.h"
+#include "wait.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "gdbthread.h"
+#include "annotate.h"
+#include "symfile.h" /* for overlay functions */
- In this case, the pc will be at the beginning of a function.
+#include <signal.h>
- b) We did a subroutine return.
+/* Prototypes for local functions */
- Otherwise.
+static void signals_info PARAMS ((char *, int));
- c) We did a longjmp.
+static void handle_command PARAMS ((char *, int));
- If we did a longjump, we were doing "nexti", since a next would
- have attempted to skip over the assembly language routine in which
- the longjmp is coded and would have simply been the equivalent of a
- continue. I consider this ok behaivior. We'd like one of two
- things to happen if we are doing a nexti through the longjmp()
- routine: 1) It behaves as a stepi, or 2) It acts like a continue as
- above. Given that this is a special case, and that anybody who
- thinks that the concept of sub calls is meaningful in the context
- of a longjmp, I'll take either one. Let's see what happens.
+static void sig_print_info PARAMS ((enum target_signal));
- Acts like a subroutine return. I can handle that with no problem
- at all.
+static void sig_print_header PARAMS ((void));
- -->So: If the current and previous beginnings of the current
- function don't match, *and* the pc is at the start of a function,
- we've done a subroutine call. If the pc is not at the start of a
- function, we *didn't* do a subroutine call.
+static void resume_cleanups PARAMS ((int));
- -->If the beginnings of the current and previous function do match,
- either:
+static int hook_stop_stub PARAMS ((char *));
- a) We just did a recursive call.
+static void delete_breakpoint_current_contents PARAMS ((PTR));
- In this case, we would be at the very beginning of a
- function and 1) it will have a prologue (don't jump to
- before prologue, or 2) (we assume here that it doesn't have
- a prologue) there will have been a change in the stack
- pointer over the last instruction. (Ie. it's got to put
- the saved pc somewhere. The stack is the usual place. In
- a recursive call a register is only an option if there's a
- prologue to do something with it. This is even true on
- register window machines; the prologue sets up the new
- window. It might not be true on a register window machine
- where the call instruction moved the register window
- itself. Hmmm. One would hope that the stack pointer would
- also change. If it doesn't, somebody send me a note, and
- I'll work out a more general theory.
- bug-gdb@prep.ai.mit.edu). This is true (albeit slipperly
- so) on all machines I'm aware of:
+int inferior_ignoring_startup_exec_events = 0;
+int inferior_ignoring_leading_exec_events = 0;
- m68k: Call changes stack pointer. Regular jumps don't.
+#ifdef HPUXHPPA
+/* wait_for_inferior and normal_stop use this to notify the user
+ when the inferior stopped in a different thread than it had been
+ running in. */
+static int switched_from_inferior_pid;
+#endif
- sparc: Recursive calls must have frames and therefor,
- prologues.
+/* resume and wait_for_inferior use this to ensure that when
+ stepping over a hit breakpoint in a threaded application
+ only the thread that hit the breakpoint is stepped and the
+ other threads don't continue. This prevents having another
+ thread run past the breakpoint while it is temporarily
+ removed.
- vax: All calls have frames and hence change the
- stack pointer.
+ This is not thread-specific, so it isn't saved as part of
+ the infrun state.
- b) We did a return from a recursive call. I don't see that we
- have either the ability or the need to distinguish this
- from an ordinary jump. The stack frame will be printed
- when and if the frame pointer changes; if we are in a
- function without a frame pointer, it's the users own
- lookout.
+ Versions of gdb which don't use the "step == this thread steps
+ and others continue" model but instead use the "step == this
+ thread steps and others wait" shouldn't do this. */
+static int thread_step_needed = 0;
- c) We did a jump within a function. We assume that this is
- true if we didn't do a recursive call.
+void _initialize_infrun PARAMS ((void));
- d) We are in no-man's land ("I see no symbols here"). We
- don't worry about this; it will make calls look like simple
- jumps (and the stack frames will be printed when the frame
- pointer moves), which is a reasonably non-violent response.
+/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
+ program. It needs to examine the jmp_buf argument and extract the PC
+ from it. The return value is non-zero on success, zero otherwise. */
-#if 0
- We skip this; it causes more problems than it's worth.
-#ifdef SUN4_COMPILER_FEATURE
- We do a special ifdef for the sun 4, forcing it to single step
- into calls which don't have prologues. This means that we can't
- nexti over leaf nodes, we can probably next over them (since they
- won't have debugging symbols, usually), and we can next out of
- functions returning structures (with a "call .stret4" at the end).
+#ifndef GET_LONGJMP_TARGET
+#define GET_LONGJMP_TARGET(PC_ADDR) 0
#endif
-#endif
-*/
-
-
-
-
-#include <stdio.h>
-#include <string.h>
-#include "defs.h"
-#include "param.h"
-#include "symtab.h"
-#include "frame.h"
-#include "inferior.h"
-#include "breakpoint.h"
-#include "wait.h"
-#include "gdbcore.h"
-#include "signame.h"
-#include "command.h"
-#include "terminal.h" /* For #ifdef TIOCGPGRP and new_tty */
-#include "target.h"
-#include <signal.h>
+/* Some machines have trampoline code that sits between function callers
+ and the actual functions themselves. If this machine doesn't have
+ such things, disable their processing. */
-/* unistd.h is needed to #define X_OK */
-#ifdef USG
-#include <unistd.h>
-#else
-#include <sys/file.h>
+#ifndef SKIP_TRAMPOLINE_CODE
+#define SKIP_TRAMPOLINE_CODE(pc) 0
#endif
-#ifdef SET_STACK_LIMIT_HUGE
-#include <sys/time.h>
-#include <sys/resource.h>
+/* Dynamic function trampolines are similar to solib trampolines in that they
+ are between the caller and the callee. The difference is that when you
+ enter a dynamic trampoline, you can't determine the callee's address. Some
+ (usually complex) code needs to run in the dynamic trampoline to figure out
+ the callee's address. This macro is usually called twice. First, when we
+ enter the trampoline (looks like a normal function call at that point). It
+ should return the PC of a point within the trampoline where the callee's
+ address is known. Second, when we hit the breakpoint, this routine returns
+ the callee's address. At that point, things proceed as per a step resume
+ breakpoint. */
+
+#ifndef DYNAMIC_TRAMPOLINE_NEXTPC
+#define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0
+#endif
-extern int original_stack_limit;
-#endif /* SET_STACK_LIMIT_HUGE */
+/* On SVR4 based systems, determining the callee's address is exceedingly
+ difficult and depends on the implementation of the run time loader.
+ If we are stepping at the source level, we single step until we exit
+ the run time loader code and reach the callee's address. */
-extern char *getenv ();
-extern char **environ;
+#ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE
+#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0
+#endif
-extern struct target_ops child_ops; /* In inftarg.c */
+/* For SVR4 shared libraries, each call goes through a small piece of
+ trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
+ to nonzero if we are current stopped in one of these. */
+#ifndef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0
+#endif
-/* Sigtramp is a routine that the kernel calls (which then calls the
- signal handler). On most machines it is a library routine that
- is linked into the executable.
+/* In some shared library schemes, the return path from a shared library
+ call may need to go through a trampoline too. */
- This macro, given a program counter value and the name of the
- function in which that PC resides (which can be null if the
- name is not known), returns nonzero if the PC and name show
- that we are in sigtramp.
+#ifndef IN_SOLIB_RETURN_TRAMPOLINE
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc,name) 0
+#endif
- On most machines just see if the name is sigtramp (and if we have
- no name, assume we are not in sigtramp). */
-#if !defined (IN_SIGTRAMP)
-#define IN_SIGTRAMP(pc, name) \
- (name && !strcmp ("_sigtramp", name))
+/* On MIPS16, a function that returns a floating point value may call
+ a library helper function to copy the return value to a floating point
+ register. The IGNORE_HELPER_CALL macro returns non-zero if we
+ should ignore (i.e. step over) this function call. */
+#ifndef IGNORE_HELPER_CALL
+#define IGNORE_HELPER_CALL(pc) 0
#endif
-#ifdef TDESC
-#include "tdesc.h"
-int safe_to_init_tdesc_context = 0;
-extern dc_dcontext_t current_context;
+/* On some systems, the PC may be left pointing at an instruction that won't
+ actually be executed. This is usually indicated by a bit in the PSW. If
+ we find ourselves in such a state, then we step the target beyond the
+ nullified instruction before returning control to the user so as to avoid
+ confusion. */
+
+#ifndef INSTRUCTION_NULLIFIED
+#define INSTRUCTION_NULLIFIED 0
#endif
/* Tables of how to react to signals; the user sets them. */
-static char signal_stop[NSIG];
-static char signal_print[NSIG];
-static char signal_program[NSIG];
-
-/* Nonzero if breakpoints are now inserted in the inferior. */
-/* Nonstatic for initialization during xxx_create_inferior. FIXME. */
+static unsigned char *signal_stop;
+static unsigned char *signal_print;
+static unsigned char *signal_program;
-/*static*/ int breakpoints_inserted;
+#define SET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 1; \
+ } while (0)
-/* Function inferior was in as of last step command. */
+#define UNSET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 0; \
+ } while (0)
-static struct symbol *step_start_function;
-/* Nonzero => address for special breakpoint for resuming stepping. */
+/* Command list pointer for the "stop" placeholder. */
-static CORE_ADDR step_resume_break_address;
+static struct cmd_list_element *stop_command;
-/* Pointer to orig contents of the byte where the special breakpoint is. */
+/* Nonzero if breakpoints are now inserted in the inferior. */
-static char step_resume_break_shadow[BREAKPOINT_MAX];
+static int breakpoints_inserted;
-/* Nonzero means the special breakpoint is a duplicate
- so it has not itself been inserted. */
+/* Function inferior was in as of last step command. */
-static int step_resume_break_duplicate;
+static struct symbol *step_start_function;
/* Nonzero if we are expecting a trace trap and should proceed from it. */
static int trap_expected;
+#ifdef SOLIB_ADD
+/* Nonzero if we want to give control to the user when we're notified
+ of shared library events by the dynamic linker. */
+static int stop_on_solib_events;
+#endif
+
+#ifdef HP_OS_BUG
/* Nonzero if the next time we try to continue the inferior, it will
step one instruction and generate a spurious trace trap.
This is used to compensate for a bug in HP-UX. */
static int trap_expected_after_continue;
+#endif
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
int stop_soon_quietly;
-/* Nonzero if pc has been changed by the debugger
- since the inferior stopped. */
-
-int pc_changed;
-
/* Nonzero if proceed is being used for a "finish" command or a similar
situation when stop_registers should be saved. */
static int stop_print_frame;
-#ifdef NO_SINGLE_STEP
-extern int one_stepped; /* From machine dependent code */
-extern void single_step (); /* Same. */
-#endif /* NO_SINGLE_STEP */
+static struct breakpoint *step_resume_breakpoint = NULL;
+static struct breakpoint *through_sigtramp_breakpoint = NULL;
+
+/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
+ interactions with an inferior that is running a kernel function
+ (aka, a system call or "syscall"). wait_for_inferior therefore
+ may have a need to know when the inferior is in a syscall. This
+ is a count of the number of inferior threads which are known to
+ currently be running in a syscall. */
+static int number_of_threads_in_syscalls;
+
+/* This is used to remember when a fork, vfork or exec event
+ was caught by a catchpoint, and thus the event is to be
+ followed at the next resume of the inferior, and not
+ immediately. */
+static struct {
+ enum target_waitkind kind;
+ struct {
+ int parent_pid;
+ int saw_parent_fork;
+ int child_pid;
+ int saw_child_fork;
+ int saw_child_exec;
+ } fork_event;
+ char * execd_pathname;
+} pending_follow;
+
+/* Some platforms don't allow us to do anything meaningful with a
+ vforked child until it has exec'd. Vforked processes on such
+ platforms can only be followed after they've exec'd.
+
+ When this is set to 0, a vfork can be immediately followed,
+ and an exec can be followed merely as an exec. When this is
+ set to 1, a vfork event has been seen, but cannot be followed
+ until the exec is seen.
+
+ (In the latter case, inferior_pid is still the parent of the
+ vfork, and pending_follow.fork_event.child_pid is the child. The
+ appropriate process is followed, according to the setting of
+ follow-fork-mode.) */
+static int follow_vfork_when_exec;
+
+static char * follow_fork_mode_kind_names [] = {
+/* ??rehrauer: The "both" option is broken, by what may be a 10.20
+ kernel problem. It's also not terribly useful without a GUI to
+ help the user drive two debuggers. So for now, I'm disabling
+ the "both" option.
+ "parent", "child", "both", "ask" };
+ */
+ "parent", "child", "ask" };
+
+static char * follow_fork_mode_string = NULL;
+
+\f
+#if defined(HPUXHPPA)
+static void
+follow_inferior_fork (parent_pid, child_pid, has_forked, has_vforked)
+ int parent_pid;
+ int child_pid;
+ int has_forked;
+ int has_vforked;
+{
+ int followed_parent = 0;
+ int followed_child = 0;
+ int ima_clone = 0;
+
+ /* Which process did the user want us to follow? */
+ char * follow_mode =
+ savestring (follow_fork_mode_string, strlen (follow_fork_mode_string));
+
+ /* Or, did the user not know, and want us to ask? */
+ if (STREQ (follow_fork_mode_string, "ask"))
+ {
+ char requested_mode[100];
+
+ free (follow_mode);
+ error ("\"ask\" mode NYI");
+ follow_mode = savestring (requested_mode, strlen (requested_mode));
+ }
+
+ /* If we're to be following the parent, then detach from child_pid.
+ We're already following the parent, so need do nothing explicit
+ for it. */
+ if (STREQ (follow_mode, "parent"))
+ {
+ followed_parent = 1;
+
+ /* We're already attached to the parent, by default. */
+
+ /* Before detaching from the child, remove all breakpoints from
+ it. (This won't actually modify the breakpoint list, but will
+ physically remove the breakpoints from the child.) */
+ if (! has_vforked || ! follow_vfork_when_exec)
+ {
+ detach_breakpoints (child_pid);
+ SOLIB_REMOVE_INFERIOR_HOOK (child_pid);
+ }
+
+ /* Detach from the child. */
+ dont_repeat ();
+
+ target_require_detach (child_pid, "", 1);
+ }
+
+ /* If we're to be following the child, then attach to it, detach
+ from inferior_pid, and set inferior_pid to child_pid. */
+ else if (STREQ (follow_mode, "child"))
+ {
+ char child_pid_spelling [100]; /* Arbitrary length. */
+
+ followed_child = 1;
+
+ /* Before detaching from the parent, detach all breakpoints from
+ the child. But only if we're forking, or if we follow vforks
+ as soon as they happen. (If we're following vforks only when
+ the child has exec'd, then it's very wrong to try to write
+ back the "shadow contents" of inserted breakpoints now -- they
+ belong to the child's pre-exec'd a.out.) */
+ if (! has_vforked || ! follow_vfork_when_exec)
+ {
+ detach_breakpoints (child_pid);
+ }
+
+ /* Before detaching from the parent, remove all breakpoints from it. */
+ remove_breakpoints ();
+
+ /* Also reset the solib inferior hook from the parent. */
+ SOLIB_REMOVE_INFERIOR_HOOK (inferior_pid);
+
+ /* Detach from the parent. */
+ dont_repeat ();
+ target_detach (NULL, 1);
+
+ /* Attach to the child. */
+ inferior_pid = child_pid;
+ sprintf (child_pid_spelling, "%d", child_pid);
+ dont_repeat ();
+
+ target_require_attach (child_pid_spelling, 1);
+
+ /* Was there a step_resume breakpoint? (There was if the user
+ did a "next" at the fork() call.) If so, explicitly reset its
+ thread number.
+
+ step_resumes are a form of bp that are made to be per-thread.
+ Since we created the step_resume bp when the parent process
+ was being debugged, and now are switching to the child process,
+ from the breakpoint package's viewpoint, that's a switch of
+ "threads". We must update the bp's notion of which thread
+ it is for, or it'll be ignored when it triggers... */
+ if (step_resume_breakpoint &&
+ (! has_vforked || ! follow_vfork_when_exec))
+ breakpoint_re_set_thread (step_resume_breakpoint);
+
+ /* Reinsert all breakpoints in the child. (The user may've set
+ breakpoints after catching the fork, in which case those
+ actually didn't get set in the child, but only in the parent.) */
+ if (! has_vforked || ! follow_vfork_when_exec)
+ {
+ breakpoint_re_set ();
+ insert_breakpoints ();
+ }
+ }
+
+ /* If we're to be following both parent and child, then fork ourselves,
+ and attach the debugger clone to the child. */
+ else if (STREQ (follow_mode, "both"))
+ {
+ char pid_suffix [100]; /* Arbitrary length. */
+
+ /* Clone ourselves to follow the child. This is the end of our
+ involvement with child_pid; our clone will take it from here... */
+ dont_repeat ();
+ target_clone_and_follow_inferior (child_pid, &followed_child);
+ followed_parent = !followed_child;
+
+ /* We continue to follow the parent. To help distinguish the two
+ debuggers, though, both we and our clone will reset our prompts. */
+ sprintf (pid_suffix, "[%d] ", inferior_pid);
+ set_prompt (strcat (get_prompt (), pid_suffix));
+ }
+
+ /* The parent and child of a vfork share the same address space.
+ Also, on some targets the order in which vfork and exec events
+ are received for parent in child requires some delicate handling
+ of the events.
+
+ For instance, on ptrace-based HPUX we receive the child's vfork
+ event first, at which time the parent has been suspended by the
+ OS and is essentially untouchable until the child's exit or second
+ exec event arrives. At that time, the parent's vfork event is
+ delivered to us, and that's when we see and decide how to follow
+ the vfork. But to get to that point, we must continue the child
+ until it execs or exits. To do that smoothly, all breakpoints
+ must be removed from the child, in case there are any set between
+ the vfork() and exec() calls. But removing them from the child
+ also removes them from the parent, due to the shared-address-space
+ nature of a vfork'd parent and child. On HPUX, therefore, we must
+ take care to restore the bp's to the parent before we continue it.
+ Else, it's likely that we may not stop in the expected place. (The
+ worst scenario is when the user tries to step over a vfork() call;
+ the step-resume bp must be restored for the step to properly stop
+ in the parent after the call completes!)
+
+ Sequence of events, as reported to gdb from HPUX:
+
+ Parent Child Action for gdb to take
+ -------------------------------------------------------
+ 1 VFORK Continue child
+ 2 EXEC
+ 3 EXEC or EXIT
+ 4 VFORK */
+ if (has_vforked)
+ {
+ target_post_follow_vfork (parent_pid,
+ followed_parent,
+ child_pid,
+ followed_child);
+ }
+
+ pending_follow.fork_event.saw_parent_fork = 0;
+ pending_follow.fork_event.saw_child_fork = 0;
+
+ free (follow_mode);
+}
+
+static void
+follow_fork (parent_pid, child_pid)
+ int parent_pid;
+ int child_pid;
+{
+ follow_inferior_fork (parent_pid, child_pid, 1, 0);
+}
+
+
+/* Forward declaration. */
+static void follow_exec PARAMS((int, char *));
+
+static void
+follow_vfork (parent_pid, child_pid)
+ int parent_pid;
+ int child_pid;
+{
+ follow_inferior_fork (parent_pid, child_pid, 0, 1);
+
+ /* Did we follow the child? Had it exec'd before we saw the parent vfork? */
+ if (pending_follow.fork_event.saw_child_exec && (inferior_pid == child_pid))
+ {
+ pending_follow.fork_event.saw_child_exec = 0;
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_exec (inferior_pid, pending_follow.execd_pathname);
+ free (pending_follow.execd_pathname);
+ }
+}
+#endif /* HPUXHPPA */
+
+static void
+follow_exec (pid, execd_pathname)
+ int pid;
+ char * execd_pathname;
+{
+#ifdef HPUXHPPA
+ int saved_pid = pid;
+ extern struct target_ops child_ops;
+
+ /* Did this exec() follow a vfork()? If so, we must follow the
+ vfork now too. Do it before following the exec. */
+ if (follow_vfork_when_exec &&
+ (pending_follow.kind == TARGET_WAITKIND_VFORKED))
+ {
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_vfork (inferior_pid, pending_follow.fork_event.child_pid);
+ follow_vfork_when_exec = 0;
+ saved_pid = inferior_pid;
+
+ /* Did we follow the parent? If so, we're done. If we followed
+ the child then we must also follow its exec(). */
+ if (inferior_pid == pending_follow.fork_event.parent_pid)
+ return;
+ }
+
+ /* This is an exec event that we actually wish to pay attention to.
+ Refresh our symbol table to the newly exec'd program, remove any
+ momentary bp's, etc.
+
+ If there are breakpoints, they aren't really inserted now,
+ since the exec() transformed our inferior into a fresh set
+ of instructions.
+
+ We want to preserve symbolic breakpoints on the list, since
+ we have hopes that they can be reset after the new a.out's
+ symbol table is read.
+
+ However, any "raw" breakpoints must be removed from the list
+ (e.g., the solib bp's), since their address is probably invalid
+ now.
+
+ And, we DON'T want to call delete_breakpoints() here, since
+ that may write the bp's "shadow contents" (the instruction
+ value that was overwritten witha TRAP instruction). Since
+ we now have a new a.out, those shadow contents aren't valid. */
+ update_breakpoints_after_exec ();
+
+ /* If there was one, it's gone now. We cannot truly step-to-next
+ statement through an exec(). */
+ step_resume_breakpoint = NULL;
+ step_range_start = 0;
+ step_range_end = 0;
-static void insert_step_breakpoint ();
-static void remove_step_breakpoint ();
-/*static*/ void wait_for_inferior ();
-void init_wait_for_inferior ();
-void normal_stop ();
+ /* If there was one, it's gone now. */
+ through_sigtramp_breakpoint = NULL;
+
+ /* What is this a.out's name? */
+ printf_unfiltered ("Executing new program: %s\n", execd_pathname);
+
+ /* We've followed the inferior through an exec. Therefore, the
+ inferior has essentially been killed & reborn. */
+ gdb_flush (gdb_stdout);
+ target_mourn_inferior ();
+ inferior_pid = saved_pid; /* Because mourn_inferior resets inferior_pid. */
+ push_target (&child_ops);
+
+ /* That a.out is now the one to use. */
+ exec_file_attach (execd_pathname, 0);
+
+ /* And also is where symbols can be found. */
+ symbol_file_command (execd_pathname, 0);
+
+ /* Reset the shared library package. This ensures that we get
+ a shlib event when the child reaches "_start", at which point
+ the dld will have had a chance to initialize the child. */
+ SOLIB_RESTART ();
+ SOLIB_CREATE_INFERIOR_HOOK (inferior_pid);
+
+ /* Reinsert all breakpoints. (Those which were symbolic have
+ been reset to the proper address in the new a.out, thanks
+ to symbol_file_command...) */
+ insert_breakpoints ();
+
+ /* The next resume of this inferior should bring it to the shlib
+ startup breakpoints. (If the user had also set bp's on
+ "main" from the old (parent) process, then they'll auto-
+ matically get reset there in the new process.) */
+#endif
+}
+
+/* Non-zero if we just simulating a single-step. This is needed
+ because we cannot remove the breakpoints in the inferior process
+ until after the `wait' in `wait_for_inferior'. */
+static int singlestep_breakpoints_inserted_p = 0;
\f
/* Things to clean up if we QUIT out of resume (). */
normal_stop ();
}
+static char schedlock_off[] = "off";
+static char schedlock_on[] = "on";
+static char schedlock_step[] = "step";
+static char *scheduler_mode = schedlock_off;
+static char *scheduler_enums[] = {schedlock_off, schedlock_on, schedlock_step};
+
+static void
+set_schedlock_func (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ if (c->type == set_cmd)
+ if (!target_can_lock_scheduler)
+ {
+ scheduler_mode = schedlock_off;
+ error ("Target '%s' cannot support this command.",
+ target_shortname);
+ }
+}
+
+
/* Resume the inferior, but allow a QUIT. This is useful if the user
wants to interrupt some lengthy single-stepping operation
(for child processes, the SIGINT goes to the inferior, and so
STEP nonzero if we should step (zero to continue instead).
SIG is the signal to give the inferior (zero for none). */
-static void
+void
resume (step, sig)
int step;
- int sig;
+ enum target_signal sig;
{
- struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
+ int should_resume = 1;
+ struct cleanup *old_cleanups = make_cleanup ((make_cleanup_func)
+ resume_cleanups, 0);
QUIT;
-#ifdef NO_SINGLE_STEP
- if (step) {
- single_step(); /* Do it the hard way, w/temp breakpoints */
- step = 0; /* ...and don't ask hardware to do it. */
- }
+#ifdef CANNOT_STEP_BREAKPOINT
+ /* Most targets can step a breakpoint instruction, thus executing it
+ normally. But if this one cannot, just continue and we will hit
+ it anyway. */
+ if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ step = 0;
#endif
+ if (SOFTWARE_SINGLE_STEP_P && step)
+ {
+ /* Do it the hard way, w/temp breakpoints */
+ SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints*/);
+ /* ...and don't ask hardware to do it. */
+ step = 0;
+ /* and do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ }
+
/* Handle any optimized stores to the inferior NOW... */
#ifdef DO_DEFERRED_STORES
DO_DEFERRED_STORES;
#endif
- target_resume (step, sig);
+#ifdef HPUXHPPA
+ /* If there were any forks/vforks/execs that were caught and are
+ now to be followed, then do so. */
+ switch (pending_follow.kind)
+ {
+ case (TARGET_WAITKIND_FORKED):
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_fork (inferior_pid, pending_follow.fork_event.child_pid);
+ break;
+
+ case (TARGET_WAITKIND_VFORKED):
+ {
+ int saw_child_exec = pending_follow.fork_event.saw_child_exec;
+
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ follow_vfork (inferior_pid, pending_follow.fork_event.child_pid);
+
+ /* Did we follow the child, but not yet see the child's exec event?
+ If so, then it actually ought to be waiting for us; we respond to
+ parent vfork events. We don't actually want to resume the child
+ in this situation; we want to just get its exec event. */
+ if (! saw_child_exec &&
+ (inferior_pid == pending_follow.fork_event.child_pid))
+ should_resume = 0;
+ }
+ break;
+
+ case (TARGET_WAITKIND_EXECD):
+ /* If we saw a vfork event but couldn't follow it until we saw
+ an exec, then now might be the time! */
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+ /* follow_exec is called as soon as the exec event is seen. */
+ break;
+
+ default:
+ break;
+ }
+#endif /* HPUXHPPA */
+
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
+
+ if (should_resume)
+ {
+#ifdef HPUXHPPA
+ if (thread_step_needed)
+ {
+ /* We stopped on a BPT instruction;
+ don't continue other threads and
+ just step this thread. */
+ thread_step_needed = 0;
+
+ if (!breakpoint_here_p(read_pc()))
+ {
+ /* Breakpoint deleted: ok to do regular resume
+ where all the threads either step or continue. */
+ target_resume (-1, step, sig);
+ }
+ else
+ {
+ if (!step)
+ {
+ warning ( "Internal error, changing continue to step." );
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ trap_expected = 1;
+ step = 1;
+ }
+
+ target_resume (inferior_pid, step, sig);
+ }
+ }
+ else
+#endif /* HPUXHPPA */
+ {
+ /* Vanilla resume. */
+
+ if ((scheduler_mode == schedlock_on) ||
+ (scheduler_mode == schedlock_step && step != 0))
+ target_resume (inferior_pid, step, sig);
+ else
+ target_resume (-1, step, sig);
+ }
+ }
+
discard_cleanups (old_cleanups);
}
step_range_end = 0;
step_frame_address = 0;
step_over_calls = -1;
- step_resume_break_address = 0;
stop_after_trap = 0;
stop_soon_quietly = 0;
proceed_to_finish = 0;
void
proceed (addr, siggnal, step)
CORE_ADDR addr;
- int siggnal;
+ enum target_signal siggnal;
int step;
{
int oneproc = 0;
{
/* If there is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints
- so that we do not stop right away. */
+ so that we do not stop right away (and report a second
+ hit at this breakpoint). */
+
+ if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ oneproc = 1;
- if (!pc_changed && breakpoint_here_p (read_pc ()))
+#ifndef STEP_SKIPS_DELAY
+#define STEP_SKIPS_DELAY(pc) (0)
+#define STEP_SKIPS_DELAY_P (0)
+#endif
+ /* Check breakpoint_here_p first, because breakpoint_here_p is fast
+ (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
+ is slow (it needs to read memory from the target). */
+ if (STEP_SKIPS_DELAY_P
+ && breakpoint_here_p (read_pc () + 4)
+ && STEP_SKIPS_DELAY (read_pc ()))
oneproc = 1;
}
else
{
- write_register (PC_REGNUM, addr);
-#ifdef NPC_REGNUM
- write_register (NPC_REGNUM, addr + 4);
-#ifdef NNPC_REGNUM
- write_register (NNPC_REGNUM, addr + 8);
-#endif
-#endif
+ write_pc (addr);
+
+ /* New address; we don't need to single-step a thread
+ over a breakpoint we just hit, 'cause we aren't
+ continuing from there.
+
+ It's not worth worrying about the case where a user
+ asks for a "jump" at the current PC--if they get the
+ hiccup of re-hiting a hit breakpoint, what else do
+ they expect? */
+ thread_step_needed = 0;
+ }
+
+#ifdef PREPARE_TO_PROCEED
+ /* In a multi-threaded task we may select another thread
+ and then continue or step.
+
+ But if the old thread was stopped at a breakpoint, it
+ will immediately cause another breakpoint stop without
+ any execution (i.e. it will report a breakpoint hit
+ incorrectly). So we must step over it first.
+
+ PREPARE_TO_PROCEED checks the current thread against the thread
+ that reported the most recent event. If a step-over is required
+ it returns TRUE and sets the current thread to the old thread. */
+ if (PREPARE_TO_PROCEED() && breakpoint_here_p (read_pc()))
+ {
+ oneproc = 1;
+ thread_step_needed = 1;
}
+#endif /* PREPARE_TO_PROCEED */
+
+#ifdef HP_OS_BUG
if (trap_expected_after_continue)
{
/* If (step == 0), a trap will be automatically generated after
oneproc = 1;
trap_expected_after_continue = 0;
}
+#endif /* HP_OS_BUG */
if (oneproc)
/* We will get a trace trap after one instruction.
error ("Cannot insert breakpoints.\n\
The same program may be running in another process.");
}
+
breakpoints_inserted = 1;
}
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- if (siggnal >= 0)
+ if (siggnal != TARGET_SIGNAL_DEFAULT)
stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (stop_signal < NSIG && !signal_program[stop_signal])
- stop_signal= 0;
+ else if (!signal_program[stop_signal])
+ stop_signal = TARGET_SIGNAL_0;
+
+ annotate_starting ();
+
+ /* Make sure that output from GDB appears before output from the
+ inferior. */
+ gdb_flush (gdb_stdout);
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), stop_signal);
normal_stop ();
}
-#if 0
-/* This might be useful (not sure), but isn't currently used. See also
- write_pc(). */
-/* Writing the inferior pc as a register calls this function
- to inform infrun that the pc has been set in the debugger. */
-
-void
-writing_pc (val)
- CORE_ADDR val;
-{
- stop_pc = val;
- pc_changed = 1;
-}
-#endif
-
/* Record the pc and sp of the program the last time it stopped.
These are just used internally by wait_for_inferior, but need
to be preserved over calls to it and cleared when the inferior
is started. */
static CORE_ADDR prev_pc;
-static CORE_ADDR prev_sp;
static CORE_ADDR prev_func_start;
static char *prev_func_name;
\f
-/* Start an inferior Unix child process and sets inferior_pid to its pid.
- EXEC_FILE is the file to run.
- ALLARGS is a string containing the arguments to the program.
- ENV is the environment vector to pass. Errors reported with error(). */
+/* Start remote-debugging of a machine over a serial link. */
-#ifndef SHELL_FILE
-#define SHELL_FILE "/bin/sh"
-#endif
+void
+start_remote ()
+{
+ init_thread_list ();
+ init_wait_for_inferior ();
+ stop_soon_quietly = 1;
+ trap_expected = 0;
+ wait_for_inferior ();
+ normal_stop ();
+}
+
+/* Initialize static vars when a new inferior begins. */
void
-child_create_inferior (exec_file, allargs, env)
- char *exec_file;
- char *allargs;
- char **env;
+init_wait_for_inferior ()
{
- int pid;
- char *shell_command;
- extern int sys_nerr;
- extern char *sys_errlist[];
- char *shell_file;
- static char default_shell_file[] = SHELL_FILE;
- int len;
- int pending_execs;
- /* Set debug_fork then attach to the child while it sleeps, to debug. */
- static int debug_fork = 0;
- /* This is set to the result of setpgrp, which if vforked, will be visible
- to you in the parent process. It's only used by humans for debugging. */
- static int debug_setpgrp = 657473;
- char **save_our_env;
-
- /* The user might want tilde-expansion, and in general probably wants
- the program to behave the same way as if run from
- his/her favorite shell. So we let the shell run it for us.
- FIXME, this should probably search the local environment (as
- modified by the setenv command), not the env gdb inherited. */
- shell_file = getenv ("SHELL");
- if (shell_file == NULL)
- shell_file = default_shell_file;
-
- len = 5 + strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop*/ 10;
- /* If desired, concat something onto the front of ALLARGS.
- SHELL_COMMAND is the result. */
-#ifdef SHELL_COMMAND_CONCAT
- shell_command = (char *) alloca (strlen (SHELL_COMMAND_CONCAT) + len);
- strcpy (shell_command, SHELL_COMMAND_CONCAT);
-#else
- shell_command = (char *) alloca (len);
- shell_command[0] = '\0';
-#endif
- strcat (shell_command, "exec ");
- strcat (shell_command, exec_file);
- strcat (shell_command, " ");
- strcat (shell_command, allargs);
+ /* These are meaningless until the first time through wait_for_inferior. */
+ prev_pc = 0;
+ prev_func_start = 0;
+ prev_func_name = NULL;
- /* exec is said to fail if the executable is open. */
- close_exec_file ();
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 0;
+#endif
+ breakpoints_inserted = 0;
+ breakpoint_init_inferior (inf_starting);
- /* Retain a copy of our environment variables, since the child will
- replace the value of environ and if we're vforked, we have to
- restore it. */
- save_our_env = environ;
+ /* Don't confuse first call to proceed(). */
+ stop_signal = TARGET_SIGNAL_0;
- /* Tell the terminal handling subsystem what tty we plan to run on;
- it will just record the information for later. */
+ /* The first resume is not following a fork/vfork/exec. */
+ pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
+ pending_follow.fork_event.saw_parent_fork = 0;
+ pending_follow.fork_event.saw_child_fork = 0;
+ pending_follow.fork_event.saw_child_exec = 0;
- new_tty_prefork (inferior_io_terminal);
+ /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
+ number_of_threads_in_syscalls = 0;
- /* It is generally good practice to flush any possible pending stdio
- output prior to doing a fork, to avoid the possibility of both the
- parent and child flushing the same data after the fork. */
+ clear_proceed_status ();
+}
- fflush (stdout);
- fflush (stderr);
+static void
+delete_breakpoint_current_contents (arg)
+ PTR arg;
+{
+ struct breakpoint **breakpointp = (struct breakpoint **)arg;
+ if (*breakpointp != NULL)
+ {
+ delete_breakpoint (*breakpointp);
+ *breakpointp = NULL;
+ }
+}
+\f
+/* Wait for control to return from inferior to debugger.
+ If inferior gets a signal, we may decide to start it up again
+ instead of returning. That is why there is a loop in this function.
+ When this function actually returns it means the inferior
+ should be left stopped and GDB should read more commands. */
-#if defined(USG) && !defined(HAVE_VFORK)
- pid = fork ();
-#else
- if (debug_fork)
- pid = fork ();
- else
- pid = vfork ();
+void
+wait_for_inferior ()
+{
+ struct cleanup *old_cleanups;
+ struct target_waitstatus w;
+ int another_trap;
+ int random_signal = 0;
+ CORE_ADDR stop_func_start;
+ CORE_ADDR stop_func_end;
+ char *stop_func_name;
+#if 0
+ CORE_ADDR prologue_pc = 0;
+#endif
+ CORE_ADDR tmp;
+ struct symtab_and_line sal;
+ int remove_breakpoints_on_following_step = 0;
+ int current_line;
+ struct symtab *current_symtab;
+ int handling_longjmp = 0; /* FIXME */
+ int pid;
+ int saved_inferior_pid;
+ int update_step_sp = 0;
+ int stepping_through_solib_after_catch = 0;
+ bpstat stepping_through_solib_catchpoints = NULL;
+ int enable_hw_watchpoints_after_wait = 0;
+ int stepping_through_sigtramp = 0;
+ int new_thread_event;
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+ int stepped_after_stopped_by_watchpoint;
#endif
- if (pid < 0)
- perror_with_name ("vfork");
+ old_cleanups = make_cleanup (delete_breakpoint_current_contents,
+ &step_resume_breakpoint);
+ make_cleanup (delete_breakpoint_current_contents,
+ &through_sigtramp_breakpoint);
+ sal = find_pc_line(prev_pc, 0);
+ current_line = sal.line;
+ current_symtab = sal.symtab;
+
+ /* Are we stepping? */
+#define CURRENTLY_STEPPING() \
+ ((through_sigtramp_breakpoint == NULL \
+ && !handling_longjmp \
+ && ((step_range_end && step_resume_breakpoint == NULL) \
+ || trap_expected)) \
+ || stepping_through_solib_after_catch \
+ || bpstat_should_step ())
+ ;
+ thread_step_needed = 0;
+
+#ifdef HPUXHPPA
+ /* We'll update this if & when we switch to a new thread. */
+ switched_from_inferior_pid = inferior_pid;
+#endif
- if (pid == 0)
+ while (1)
{
- if (debug_fork)
- sleep (debug_fork);
+ extern int overlay_cache_invalid; /* declared in symfile.h */
-#ifdef TIOCGPGRP
- /* Run inferior in a separate process group. */
-#ifdef USG
- debug_setpgrp = setpgrp ();
-#else
- debug_setpgrp = setpgrp (getpid (), getpid ());
-#endif
- if (debug_setpgrp == -1)
- perror("setpgrp failed in child");
-#endif /* TIOCGPGRP */
+ overlay_cache_invalid = 1;
-#ifdef SET_STACK_LIMIT_HUGE
- /* Reset the stack limit back to what it was. */
- {
- struct rlimit rlim;
+ /* We have to invalidate the registers BEFORE calling target_wait because
+ they can be loaded from the target while in target_wait. This makes
+ remote debugging a bit more efficient for those targets that provide
+ critical registers as part of their normal status mechanism. */
- getrlimit (RLIMIT_STACK, &rlim);
- rlim.rlim_cur = original_stack_limit;
- setrlimit (RLIMIT_STACK, &rlim);
- }
-#endif /* SET_STACK_LIMIT_HUGE */
+ registers_changed ();
- /* Ask the tty subsystem to switch to the one we specified earlier
- (or to share the current terminal, if none was specified). */
+ if (target_wait_hook)
+ pid = target_wait_hook (-1, &w);
+ else
+ pid = target_wait (-1, &w);
- new_tty ();
+ /* Since we've done a wait, we have a new event. Don't carry
+ over any expectations about needing to step over a
+ breakpoint. */
+ thread_step_needed = 0;
+
+ /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event is
+ serviced in this loop, below. */
+ if (enable_hw_watchpoints_after_wait)
+ {
+ TARGET_ENABLE_HW_WATCHPOINTS(inferior_pid);
+ enable_hw_watchpoints_after_wait = 0;
+ }
- /* Changing the signal handlers for the inferior after
- a vfork can also change them for the superior, so we don't mess
- with signals here. See comments in
- initialize_signals for how we get the right signal handlers
- for the inferior. */
-#ifdef USE_PROC_FS
- proc_set_exec_trap (); /* Use SVR4 /proc interface */
-#else
- call_ptrace (0, 0, 0, 0); /* "Trace me, Dr. Memory!" */
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+stepped_after_stopped_by_watchpoint = 0;
#endif
- /* There is no execlpe call, so we have to set the environment
- for our child in the global variable. If we've vforked, this
- clobbers the parent, but environ is restored a few lines down
- in the parent. By the way, yes we do need to look down the
- path to find $SHELL. Rich Pixley says so, and I agree. */
- environ = env;
- execlp (shell_file, shell_file, "-c", shell_command, (char *)0);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", shell_file,
- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
- fflush (stderr);
- _exit (0177);
- }
+ /* Gross.
- /* Restore our environment in case a vforked child clob'd it. */
- environ = save_our_env;
+ We goto this label from elsewhere in wait_for_inferior when we want
+ to continue the main loop without calling "wait" and trashing the
+ waitstatus contained in W. */
+ have_waited:
- /* Now that we have a child process, make it our target. */
- push_target (&child_ops);
-
-#ifdef CREATE_INFERIOR_HOOK
- CREATE_INFERIOR_HOOK (pid);
-#endif
-
-/* The process was started by the fork that created it,
- but it will have stopped one instruction after execing the shell.
- Here we must get it up to actual execution of the real program. */
+ flush_cached_frames ();
- inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
+ /* If it's a new process, add it to the thread database */
- clear_proceed_status ();
+ new_thread_event = ((pid != inferior_pid) && !in_thread_list (pid));
+
+ if (w.kind != TARGET_WAITKIND_EXITED
+ && w.kind != TARGET_WAITKIND_SIGNALLED
+ && new_thread_event)
+ {
+ add_thread (pid);
-#if defined (START_INFERIOR_HOOK)
- START_INFERIOR_HOOK ();
-#endif
- /* We will get a trace trap after one instruction.
- Continue it automatically. Eventually (after shell does an exec)
- it will get another trace trap. Then insert breakpoints and continue. */
+#ifdef HPUXHPPA
+ fprintf_unfiltered (gdb_stderr, "[New %s]\n",
+ target_pid_or_tid_to_str (pid));
-#ifdef START_INFERIOR_TRAPS_EXPECTED
- pending_execs = START_INFERIOR_TRAPS_EXPECTED;
#else
- pending_execs = 2;
+ printf_filtered ("[New %s]\n", target_pid_to_str (pid));
#endif
- init_wait_for_inferior ();
+#if 0
+ /* NOTE: This block is ONLY meant to be invoked in case of a
+ "thread creation event"! If it is invoked for any other
+ sort of event (such as a new thread landing on a breakpoint),
+ the event will be discarded, which is almost certainly
+ a bad thing!
+
+ To avoid this, the low-level module (eg. target_wait)
+ should call in_thread_list and add_thread, so that the
+ new thread is known by the time we get here. */
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
+ /* We may want to consider not doing a resume here in order
+ to give the user a chance to play with the new thread.
+ It might be good to make that a user-settable option. */
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
+ /* At this point, all threads are stopped (happens
+ automatically in either the OS or the native code).
+ Therefore we need to continue all threads in order to
+ make progress. */
- while (1)
- {
- stop_soon_quietly = 1; /* Make wait_for_inferior be quiet */
- wait_for_inferior ();
- if (stop_signal != SIGTRAP)
- {
- /* Let shell child handle its own signals in its own way */
- /* FIXME, what if child has exit()ed? Must exit loop somehow */
- resume (0, stop_signal);
- }
- else
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+#endif
+ }
+
+ switch (w.kind)
{
- /* We handle SIGTRAP, however; it means child did an exec. */
- if (0 == --pending_execs)
- break;
- resume (0, 0); /* Just make it go on */
- }
- }
- stop_soon_quietly = 0;
+ case TARGET_WAITKIND_LOADED:
+ /* Ignore gracefully during startup of the inferior, as it
+ might be the shell which has just loaded some objects,
+ otherwise add the symbols for the newly loaded objects. */
+#ifdef SOLIB_ADD
+ if (!stop_soon_quietly)
+ {
+ extern int auto_solib_add;
+
+ /* Remove breakpoints, SOLIB_ADD might adjust
+ breakpoint addresses via breakpoint_re_set. */
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+
+ /* Check for any newly added shared libraries if we're
+ supposed to be adding them automatically. */
+ if (auto_solib_add)
+ {
+ /* Switch terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL);
+ target_terminal_inferior ();
+ }
- /* We are now in the child process of interest, having exec'd the
- correct program, and are poised at the first instruction of the
- new program. */
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- SOLIB_CREATE_INFERIOR_HOOK ();
+ /* Reinsert breakpoints and continue. */
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
#endif
+ resume (0, TARGET_SIGNAL_0);
+ continue;
- /* Should this perhaps just be a "proceed" call? FIXME */
- insert_step_breakpoint ();
- breakpoints_failed = insert_breakpoints ();
- if (!breakpoints_failed)
- {
- breakpoints_inserted = 1;
- target_terminal_inferior();
- /* Start the child program going on its first instruction, single-
- stepping if we need to. */
- resume (bpstat_should_step (), 0);
- wait_for_inferior ();
- normal_stop ();
- }
-}
+ case TARGET_WAITKIND_SPURIOUS:
+ resume (0, TARGET_SIGNAL_0);
+ continue;
-/* Start remote-debugging of a machine over a serial link. */
+ case TARGET_WAITKIND_EXITED:
+ target_terminal_ours (); /* Must do this before mourn anyway */
+ annotate_exited (w.value.integer);
+ if (w.value.integer)
+ printf_filtered ("\nProgram exited with code 0%o.\n",
+ (unsigned int)w.value.integer);
+ else
+ printf_filtered ("\nProgram exited normally.\n");
+
+ /* Record the exit code in the convenience variable $_exitcode, so
+ that the user can inspect this again later. */
+ set_internalvar (lookup_internalvar ("_exitcode"),
+ value_from_longest (builtin_type_int,
+ (LONGEST) w.value.integer));
+ gdb_flush (gdb_stdout);
+ target_mourn_inferior ();
+ singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P*/
+ stop_print_frame = 0;
+ goto stop_stepping;
-void
-start_remote ()
-{
- init_wait_for_inferior ();
- clear_proceed_status ();
- stop_soon_quietly = 1;
- trap_expected = 0;
- wait_for_inferior ();
- normal_stop ();
-}
+ case TARGET_WAITKIND_SIGNALLED:
+ stop_print_frame = 0;
+ stop_signal = w.value.sig;
+ target_terminal_ours (); /* Must do this before mourn anyway */
+ annotate_signalled ();
+
+ /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED
+ mean it is already dead? This has been here since GDB 2.8, so
+ perhaps it means rms didn't understand unix waitstatuses?
+ For the moment I'm just kludging around this in remote.c
+ rather than trying to change it here --kingdon, 5 Dec 1994. */
+ target_kill (); /* kill mourns as well */
+
+ printf_filtered ("\nProgram terminated with signal ");
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+
+ printf_filtered ("The program no longer exists.\n");
+ gdb_flush (gdb_stdout);
+ singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P*/
+ goto stop_stepping;
+
+ /* The following are the only cases in which we keep going;
+ the above cases end in a continue or goto. */
+ case TARGET_WAITKIND_FORKED:
+ stop_signal = TARGET_SIGNAL_TRAP;
+ pending_follow.kind = w.kind;
+
+ /* Ignore fork events reported for the parent; we're only
+ interested in reacting to forks of the child. Note that
+ we expect the child's fork event to be available if we
+ waited for it now. */
+ if (inferior_pid == pid)
+ {
+ pending_follow.fork_event.saw_parent_fork = 1;
+ pending_follow.fork_event.parent_pid = pid;
+ pending_follow.fork_event.child_pid = w.value.related_pid;
+ continue;
+ }
+ else
+ {
+ pending_follow.fork_event.saw_child_fork = 1;
+ pending_follow.fork_event.child_pid = pid;
+ pending_follow.fork_event.parent_pid = w.value.related_pid;
+ }
-/* Initialize static vars when a new inferior begins. */
+ stop_pc = read_pc_pid (pid);
+ saved_inferior_pid = inferior_pid;
+ inferior_pid = pid;
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ random_signal = ! bpstat_explains_signal (stop_bpstat);
+ inferior_pid = saved_inferior_pid;
+ goto process_event_stop_test;
+
+ /* If this a platform which doesn't allow a debugger to touch a
+ vfork'd inferior until after it exec's, then we'd best keep
+ our fingers entirely off the inferior, other than continuing
+ it. This has the unfortunate side-effect that catchpoints
+ of vforks will be ignored. But since the platform doesn't
+ allow the inferior be touched at vfork time, there's really
+ little choice. */
+ case TARGET_WAITKIND_VFORKED:
+ stop_signal = TARGET_SIGNAL_TRAP;
+ pending_follow.kind = w.kind;
+
+ /* Is this a vfork of the parent? If so, then give any
+ vfork catchpoints a chance to trigger now. (It's
+ dangerous to do so if the child canot be touched until
+ it execs, and the child has not yet exec'd. We probably
+ should warn the user to that effect when the catchpoint
+ triggers...) */
+ if (pid == inferior_pid)
+ {
+ pending_follow.fork_event.saw_parent_fork = 1;
+ pending_follow.fork_event.parent_pid = pid;
+ pending_follow.fork_event.child_pid = w.value.related_pid;
+ }
-void
-init_wait_for_inferior ()
-{
- /* These are meaningless until the first time through wait_for_inferior. */
- prev_pc = 0;
- prev_sp = 0;
- prev_func_start = 0;
- prev_func_name = NULL;
+ /* If we've seen the child's vfork event but cannot really touch
+ the child until it execs, then we must continue the child now.
+ Else, give any vfork catchpoints a chance to trigger now. */
+ else
+ {
+ pending_follow.fork_event.saw_child_fork = 1;
+ pending_follow.fork_event.child_pid = pid;
+ pending_follow.fork_event.parent_pid = w.value.related_pid;
+ target_post_startup_inferior (pending_follow.fork_event.child_pid);
+ follow_vfork_when_exec = ! target_can_follow_vfork_prior_to_exec ();
+ if (follow_vfork_when_exec)
+ {
+ target_resume (pid, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ }
- trap_expected_after_continue = 0;
- breakpoints_inserted = 0;
- mark_breakpoints_out ();
- stop_signal = 0; /* Don't confuse first call to proceed(). */
-}
+ stop_pc = read_pc ();
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ random_signal = ! bpstat_explains_signal (stop_bpstat);
+ goto process_event_stop_test;
+
+ case TARGET_WAITKIND_EXECD:
+ stop_signal = TARGET_SIGNAL_TRAP;
+
+ /* Is this a target which reports multiple exec events per actual
+ call to exec()? (HP-UX using ptrace does, for example.) If so,
+ ignore all but the last one. Just resume the exec'r, and wait
+ for the next exec event. */
+ if (inferior_ignoring_leading_exec_events)
+ {
+ inferior_ignoring_leading_exec_events--;
+ if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
+ ENSURE_VFORKING_PARENT_REMAINS_STOPPED(pending_follow.fork_event.parent_pid);
+ target_resume (pid, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ inferior_ignoring_leading_exec_events =
+ target_reported_exec_events_per_exec_call () - 1;
+ pending_follow.execd_pathname = savestring (w.value.execd_pathname,
+ strlen (w.value.execd_pathname));
-/* Attach to process PID, then initialize for debugging it
- and wait for the trace-trap that results from attaching. */
+ /* Did inferior_pid exec, or did a (possibly not-yet-followed)
+ child of a vfork exec?
-void
-child_attach (args, from_tty)
- char *args;
- int from_tty;
-{
- char *exec_file;
- int pid;
+ ??rehrauer: This is unabashedly an HP-UX specific thing. On
+ HP-UX, events associated with a vforking inferior come in
+ threes: a vfork event for the child (always first), followed
+ a vfork event for the parent and an exec event for the child.
+ The latter two can come in either order.
- dont_repeat();
+ If we get the parent vfork event first, life's good: We follow
+ either the parent or child, and then the child's exec event is
+ a "don't care".
- if (!args)
- error_no_arg ("process-id to attach");
+ But if we get the child's exec event first, then we delay
+ responding to it until we handle the parent's vfork. Because,
+ otherwise we can't satisfy a "catch vfork". */
+ if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
+ {
+ pending_follow.fork_event.saw_child_exec = 1;
+
+ /* On some targets, the child must be resumed before
+ the parent vfork event is delivered. A single-step
+ suffices. */
+ if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK())
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+ /* We expect the parent vfork event to be available now. */
+ continue;
+ }
-#ifndef ATTACH_DETACH
- error ("Can't attach to a process on this machine.");
-#else
- pid = atoi (args);
+ /* This causes the eventpoints and symbol table to be reset. Must
+ do this now, before trying to determine whether to stop. */
+ follow_exec (inferior_pid, pending_follow.execd_pathname);
+ free (pending_follow.execd_pathname);
- if (target_has_execution)
- {
- if (query ("A program is being debugged already. Kill it? "))
- target_kill ((char *)0, from_tty);
- else
- error ("Inferior not killed.");
- }
+ stop_pc = read_pc_pid (pid);
+ saved_inferior_pid = inferior_pid;
+ inferior_pid = pid;
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ random_signal = ! bpstat_explains_signal (stop_bpstat);
+ inferior_pid = saved_inferior_pid;
+ goto process_event_stop_test;
+
+ /* These syscall events are returned on HP-UX, as part of its
+ implementation of page-protection-based "hardware" watchpoints.
+ HP-UX has unfortunate interactions between page-protections and
+ some system calls. Our solution is to disable hardware watches
+ when a system call is entered, and reenable them when the syscall
+ completes. The downside of this is that we may miss the precise
+ point at which a watched piece of memory is modified. "Oh well."
+
+ Note that we may have multiple threads running, which may each
+ enter syscalls at roughly the same time. Since we don't have a
+ good notion currently of whether a watched piece of memory is
+ thread-private, we'd best not have any page-protections active
+ when any thread is in a syscall. Thus, we only want to reenable
+ hardware watches when no threads are in a syscall.
+
+ Also, be careful not to try to gather much state about a thread
+ that's in a syscall. It's frequently a losing proposition. */
+ case TARGET_WAITKIND_SYSCALL_ENTRY:
+ number_of_threads_in_syscalls++;
+ if (number_of_threads_in_syscalls == 1)
+ {
+ TARGET_DISABLE_HW_WATCHPOINTS(inferior_pid);
+ }
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ /* Before examining the threads further, step this thread to
+ get it entirely out of the syscall. (We get notice of the
+ event when the thread is just on the verge of exiting a
+ syscall. Stepping one instruction seems to get it back
+ into user code.)
+
+ Note that although the logical place to reenable h/w watches
+ is here, we cannot. We cannot reenable them before stepping
+ the thread (this causes the next wait on the thread to hang).
+
+ Nor can we enable them after stepping until we've done a wait.
+ Thus, we simply set the flag enable_hw_watchpoints_after_wait
+ here, which will be serviced immediately after the target
+ is waited on. */
+ case TARGET_WAITKIND_SYSCALL_RETURN:
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+
+ if (number_of_threads_in_syscalls > 0)
+ {
+ number_of_threads_in_syscalls--;
+ enable_hw_watchpoints_after_wait =
+ (number_of_threads_in_syscalls == 0);
+ }
+ continue;
- exec_file = (char *) get_exec_file (1);
+ case TARGET_WAITKIND_STOPPED:
+ stop_signal = w.value.sig;
+ break;
+ }
- if (from_tty)
- {
- printf ("Attaching program: %s pid %d\n",
- exec_file, pid);
- fflush (stdout);
- }
+ /* We may want to consider not doing a resume here in order to give
+ the user a chance to play with the new thread. It might be good
+ to make that a user-settable option. */
- attach (pid);
- inferior_pid = pid;
- push_target (&child_ops);
+ /* At this point, all threads are stopped (happens automatically in
+ either the OS or the native code). Therefore we need to continue
+ all threads in order to make progress. */
+ if (new_thread_event)
+ {
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
- mark_breakpoints_out ();
- target_terminal_init ();
- clear_proceed_status ();
- stop_soon_quietly = 1;
- /*proceed (-1, 0, -2);*/
- target_terminal_inferior ();
- wait_for_inferior ();
-#ifdef SOLIB_ADD
- SOLIB_ADD ((char *)0, from_tty, (struct target_ops *)0);
-#endif
- normal_stop ();
-#endif /* ATTACH_DETACH */
-}
-\f
-/* Wait for control to return from inferior to debugger.
- If inferior gets a signal, we may decide to start it up again
- instead of returning. That is why there is a loop in this function.
- When this function actually returns it means the inferior
- should be left stopped and GDB should read more commands. */
+ stop_pc = read_pc_pid (pid);
-void
-wait_for_inferior ()
-{
- WAITTYPE w;
- int another_trap;
- int random_signal;
- CORE_ADDR stop_sp;
- CORE_ADDR stop_func_start;
- char *stop_func_name;
- CORE_ADDR prologue_pc;
- int stop_step_resume_break;
- struct symtab_and_line sal;
- int remove_breakpoints_on_following_step = 0;
-#ifdef TDESC
- extern dc_handle_t tdesc_handle;
-#endif
- int current_line;
+ /* See if a thread hit a thread-specific breakpoint that was meant for
+ another thread. If so, then step that thread past the breakpoint,
+ and continue it. */
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ {
+ if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p)
+ random_signal = 0;
+ else
+ if (breakpoints_inserted
+ && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
+ {
+ random_signal = 0;
+ if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK,
+ pid))
+ {
+ int remove_status;
+
+ /* Saw a breakpoint, but it was hit by the wrong thread.
+ Just continue. */
+ write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, pid);
+
+ remove_status = remove_breakpoints ();
+ /* Did we fail to remove breakpoints? If so, try
+ to set the PC past the bp. (There's at least
+ one situation in which we can fail to remove
+ the bp's: On HP-UX's that use ttrace, we can't
+ change the address space of a vforking child
+ process until the child exits (well, okay, not
+ then either :-) or execs. */
+ if (remove_status != 0)
+ {
+ write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, pid);
+ }
+ else
+ { /* Single step */
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+ /* FIXME: What if a signal arrives instead of the
+ single-step happening? */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+ }
+
+ /* We need to restart all the threads now. */
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ else
+ {
+ /* This breakpoint matches--either it is the right
+ thread or it's a generic breakpoint for all threads.
+ Remember that we'll need to step just _this_ thread
+ on any following user continuation! */
+ thread_step_needed = 1;
+ }
+ }
+ }
+ else
+ random_signal = 1;
+
+ /* See if something interesting happened to the non-current thread. If
+ so, then switch to that thread, and eventually give control back to
+ the user.
+
+ Note that if there's any kind of pending follow (i.e., of a fork,
+ vfork or exec), we don't want to do this now. Rather, we'll let
+ the next resume handle it. */
+ if ((pid != inferior_pid) &&
+ (pending_follow.kind == TARGET_WAITKIND_SPURIOUS))
+ {
+ int printed = 0;
+
+ /* If it's a random signal for a non-current thread, notify user
+ if he's expressed an interest. */
+ if (random_signal
+ && signal_print[stop_signal])
+ {
+/* ??rehrauer: I don't understand the rationale for this code. If the
+ inferior will stop as a result of this signal, then the act of handling
+ the stop ought to print a message that's couches the stoppage in user
+ terms, e.g., "Stopped for breakpoint/watchpoint". If the inferior
+ won't stop as a result of the signal -- i.e., if the signal is merely
+ a side-effect of something GDB's doing "under the covers" for the
+ user, such as stepping threads over a breakpoint they shouldn't stop
+ for -- then the message seems to be a serious annoyance at best.
+
+ For now, remove the message altogether. */
#if 0
- /* This no longer works now that read_register is lazy;
- it might try to ptrace when the process is not stopped. */
- prev_pc = read_pc ();
- (void) find_pc_partial_function (prev_pc, &prev_func_name,
- &prev_func_start);
- prev_func_start += FUNCTION_START_OFFSET;
- prev_sp = read_register (SP_REGNUM);
-#endif /* 0 */
+ printed = 1;
+ target_terminal_ours_for_output ();
+ printf_filtered ("\nProgram received signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+ gdb_flush (gdb_stdout);
+#endif
+ }
- sal = find_pc_line(prev_pc, 0);
- current_line = sal.line;
+ /* If it's not SIGTRAP and not a signal we want to stop for, then
+ continue the thread. */
- while (1)
- {
- /* Clean up saved state that will become invalid. */
- pc_changed = 0;
- flush_cached_frames ();
- registers_changed ();
+ if (stop_signal != TARGET_SIGNAL_TRAP
+ && !signal_stop[stop_signal])
+ {
+ if (printed)
+ target_terminal_inferior ();
- target_wait (&w);
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
- /* See if the process still exists; clean up if it doesn't. */
- if (WIFEXITED (w))
+ target_resume (pid, 0, stop_signal);
+ continue;
+ }
+
+ /* It's a SIGTRAP or a signal we're interested in. Switch threads,
+ and fall into the rest of wait_for_inferior(). */
+
+ /* Save infrun state for the old thread. */
+ save_infrun_state (inferior_pid, prev_pc,
+ prev_func_start, prev_func_name,
+ trap_expected, step_resume_breakpoint,
+ through_sigtramp_breakpoint,
+ step_range_start, step_range_end,
+ step_frame_address, handling_longjmp,
+ another_trap,
+ stepping_through_solib_after_catch,
+ stepping_through_solib_catchpoints,
+ stepping_through_sigtramp);
+
+#ifdef HPUXHPPA
+ switched_from_inferior_pid = inferior_pid;
+#endif
+
+ inferior_pid = pid;
+
+ /* Load infrun state for the new thread. */
+ load_infrun_state (inferior_pid, &prev_pc,
+ &prev_func_start, &prev_func_name,
+ &trap_expected, &step_resume_breakpoint,
+ &through_sigtramp_breakpoint,
+ &step_range_start, &step_range_end,
+ &step_frame_address, &handling_longjmp,
+ &another_trap,
+ &stepping_through_solib_after_catch,
+ &stepping_through_solib_catchpoints,
+ &stepping_through_sigtramp);
+
+ if (context_hook)
+ context_hook (pid_to_thread_id (pid));
+
+ printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid));
+ flush_cached_frames ();
+ }
+
+ if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p)
{
- target_terminal_ours (); /* Must do this before mourn anyway */
-#ifdef TDESC
- safe_to_init_tdesc_context = 0;
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
+ }
+
+ /* If PC is pointing at a nullified instruction, then step beyond
+ it so that the user won't be confused when GDB appears to be ready
+ to execute it. */
+
+#if 0 /* XXX DEBUG */
+ printf ("infrun.c:1607: pc = 0x%x\n", read_pc ());
#endif
- if (WEXITSTATUS (w))
- printf ("\nProgram exited with code 0%o.\n",
- (unsigned int)WEXITSTATUS (w));
- else
- if (!batch_mode())
- printf ("\nProgram exited normally.\n");
- fflush (stdout);
- target_mourn_inferior ();
-#ifdef NO_SINGLE_STEP
- one_stepped = 0;
+ /* if (INSTRUCTION_NULLIFIED && CURRENTLY_STEPPING ()) */
+ if (INSTRUCTION_NULLIFIED)
+ {
+ struct target_waitstatus tmpstatus;
+#if 0
+ all_registers_info ((char *)0, 0);
#endif
- stop_print_frame = 0;
- break;
+ registers_changed ();
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+
+ /* We may have received a signal that we want to pass to
+ the inferior; therefore, we must not clobber the waitstatus
+ in W. So we call wait ourselves, then continue the loop
+ at the "have_waited" label. */
+ if (target_wait_hook)
+ target_wait_hook (pid, &tmpstatus);
+ else
+ target_wait (pid, &tmpstatus);
+
+ goto have_waited;
}
- else if (!WIFSTOPPED (w))
+
+#ifdef HAVE_STEPPABLE_WATCHPOINT
+ /* It may not be necessary to disable the watchpoint to stop over
+ it. For example, the PA can (with some kernel cooperation)
+ single step over a watchpoint without disabling the watchpoint. */
+ if (STOPPED_BY_WATCHPOINT (w))
{
- stop_print_frame = 0;
- stop_signal = WTERMSIG (w);
- target_terminal_ours (); /* Must do this before mourn anyway */
- target_kill ((char *)0, 0); /* kill mourns as well */
-#ifdef TDESC
- safe_to_init_tdesc_context = 0;
+ resume (1, 0);
+ continue;
+ }
#endif
-#ifdef PRINT_RANDOM_SIGNAL
- printf ("\nProgram terminated: ");
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
- printf ("\nProgram terminated with signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+ /* It is far more common to need to disable a watchpoint
+ to step the inferior over it. FIXME. What else might
+ a debug register or page protection watchpoint scheme need
+ here? */
+ if (STOPPED_BY_WATCHPOINT (w))
+ {
+/* At this point, we are stopped at an instruction which has attempted to write
+ to a piece of memory under control of a watchpoint. The instruction hasn't
+ actually executed yet. If we were to evaluate the watchpoint expression
+ now, we would get the old value, and therefore no change would seem to have
+ occurred.
+
+ In order to make watchpoints work `right', we really need to complete the
+ memory write, and then evaluate the watchpoint expression. The following
+ code does that by removing the watchpoint (actually, all watchpoints and
+ breakpoints), single-stepping the target, re-inserting watchpoints, and then
+ falling through to let normal single-step processing handle proceed. Since
+ this includes evaluating watchpoints, things will come to a stop in the
+ correct manner. */
+
+ write_pc (stop_pc - DECR_PC_AFTER_BREAK);
+
+ remove_breakpoints ();
+ registers_changed();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+
+ /* FIXME-maybe: is this cleaner than setting a flag? Does it
+ handle things like signals arriving and other things happening
+ in combination correctly? */
+ stepped_after_stopped_by_watchpoint = 1;
+ goto have_waited;
+ }
#endif
- printf ("The inferior process no longer exists.\n");
- fflush (stdout);
-#ifdef NO_SINGLE_STEP
- one_stepped = 0;
+
+#ifdef HAVE_CONTINUABLE_WATCHPOINT
+ /* It may be possible to simply continue after a watchpoint. */
+ STOPPED_BY_WATCHPOINT (w);
#endif
- break;
- }
-
-#ifdef NO_SINGLE_STEP
- if (one_stepped)
- single_step (0); /* This actually cleans up the ss */
-#endif /* NO_SINGLE_STEP */
-
- stop_pc = read_pc ();
-#ifdef TDESC
- if (safe_to_init_tdesc_context)
- {
- current_context = init_dcontext();
- set_current_frame ( create_new_frame (get_frame_base (read_pc()),read_pc()));
- }
- else
-#endif /* TDESC */
- set_current_frame ( create_new_frame (read_register (FP_REGNUM),
- read_pc ()));
-
- stop_frame_address = FRAME_FP (get_current_frame ());
- stop_sp = read_register (SP_REGNUM);
+
stop_func_start = 0;
+ stop_func_end = 0;
stop_func_name = 0;
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
- (void) find_pc_partial_function (stop_pc, &stop_func_name,
- &stop_func_start);
+ find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
+ &stop_func_end);
stop_func_start += FUNCTION_START_OFFSET;
another_trap = 0;
bpstat_clear (&stop_bpstat);
stop_step = 0;
stop_stack_dummy = 0;
stop_print_frame = 1;
- stop_step_resume_break = 0;
random_signal = 0;
stopped_by_random_signal = 0;
breakpoints_failed = 0;
3) set random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
- stop_signal = WSTOPSIG (w);
-
/* First, distinguish signals caused by the debugger from signals
that have to do with the program's own actions.
Note that breakpoint insns may cause SIGTRAP or SIGILL
Here we detect when a SIGILL or SIGEMT is really a breakpoint
and change it to SIGTRAP. */
- if (stop_signal == SIGTRAP
+ if (stop_signal == TARGET_SIGNAL_TRAP
|| (breakpoints_inserted &&
- (stop_signal == SIGILL
- || stop_signal == SIGEMT))
+ (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_EMT
+ ))
|| stop_soon_quietly)
{
- if (stop_signal == SIGTRAP && stop_after_trap)
+ if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
stop_print_frame = 0;
break;
if just proceeded over a breakpoint.
However, if we are trying to proceed over a breakpoint
- and end up in sigtramp, then step_resume_break_address
+ and end up in sigtramp, then through_sigtramp_breakpoint
will be set and we should check whether we've hit the
step breakpoint. */
- if (stop_signal == SIGTRAP && trap_expected
- && step_resume_break_address == NULL)
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
+ && through_sigtramp_breakpoint == NULL)
bpstat_clear (&stop_bpstat);
else
{
/* See if there is a breakpoint at the current PC. */
-#if DECR_PC_AFTER_BREAK
- /* Notice the case of stepping through a jump
- that leads just after a breakpoint.
- Don't confuse that with hitting the breakpoint.
- What we check for is that 1) stepping is going on
- and 2) the pc before the last insn does not match
- the address of the breakpoint before the current pc. */
- if (!(prev_pc != stop_pc - DECR_PC_AFTER_BREAK
- && step_range_end && !step_resume_break_address))
-#endif /* DECR_PC_AFTER_BREAK not zero */
- {
- /* See if we stopped at the special breakpoint for
- stepping over a subroutine call. If both are zero,
- this wasn't the reason for the stop. */
- if (stop_pc - DECR_PC_AFTER_BREAK
- == step_resume_break_address
- && step_resume_break_address)
- {
- stop_step_resume_break = 1;
- if (DECR_PC_AFTER_BREAK)
- {
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
- pc_changed = 0;
- }
- }
- else
- {
- stop_bpstat =
- bpstat_stop_status (&stop_pc, stop_frame_address);
- /* Following in case break condition called a
- function. */
- stop_print_frame = 1;
- }
- }
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
+ (DECR_PC_AFTER_BREAK ?
+ /* Notice the case of stepping through a jump
+ that lands just after a breakpoint.
+ Don't confuse that with hitting the breakpoint.
+ What we check for is that 1) stepping is going on
+ and 2) the pc before the last insn does not match
+ the address of the breakpoint before the current pc
+ and 3) we didn't hit a breakpoint in a signal handler
+ without an intervening stop in sigtramp, which is
+ detected by a new stack pointer value below
+ any usual function calling stack adjustments. */
+ (CURRENTLY_STEPPING ()
+ && prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && !(step_range_end
+ && INNER_THAN (read_sp (), (step_sp - 16)))) :
+ 0)
+ );
+ /* Following in case break condition called a
+ function. */
+ stop_print_frame = 1;
}
-
- if (stop_signal == SIGTRAP)
+
+ if (stop_signal == TARGET_SIGNAL_TRAP)
random_signal
= !(bpstat_explains_signal (stop_bpstat)
|| trap_expected
- || stop_step_resume_break
- || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
- || (step_range_end && !step_resume_break_address));
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+ || (step_range_end && step_resume_breakpoint == NULL));
+
else
{
random_signal
= !(bpstat_explains_signal (stop_bpstat)
- || stop_step_resume_break
/* End of a stack dummy. Some systems (e.g. Sony
news) give another signal besides SIGTRAP,
so check here as well as above. */
- || (stop_sp INNER_THAN stop_pc
- && stop_pc INNER_THAN stop_frame_address)
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
);
if (!random_signal)
- stop_signal = SIGTRAP;
+ stop_signal = TARGET_SIGNAL_TRAP;
}
}
+
+ /* When we reach this point, we've pretty much decided
+ that the reason for stopping must've been a random
+ (unexpected) signal. */
+
else
random_signal = 1;
-
+ /* If a fork, vfork or exec event was seen, then there are two
+ possible responses we can make:
+
+ 1. If a catchpoint triggers for the event (random_signal == 0),
+ then we must stop now and issue a prompt. We will resume
+ the inferior when the user tells us to.
+ 2. If no catchpoint triggers for the event (random_signal == 1),
+ then we must resume the inferior now and keep checking.
+
+ In either case, we must take appropriate steps to "follow" the
+ the fork/vfork/exec when the inferior is resumed. For example,
+ if follow-fork-mode is "child", then we must detach from the
+ parent inferior and follow the new child inferior.
+
+ In either case, setting pending_follow causes the next resume()
+ to take the appropriate following action. */
+process_event_stop_test:
+ if (w.kind == TARGET_WAITKIND_FORKED)
+ {
+ if (random_signal) /* I.e., no catchpoint triggered for this. */
+ {
+ trap_expected = 1;
+ stop_signal = TARGET_SIGNAL_0;
+ goto keep_going;
+ }
+ }
+ else if (w.kind == TARGET_WAITKIND_VFORKED)
+ {
+ if (random_signal) /* I.e., no catchpoint triggered for this. */
+ {
+ stop_signal = TARGET_SIGNAL_0;
+ goto keep_going;
+ }
+ }
+ else if (w.kind == TARGET_WAITKIND_EXECD)
+ {
+ pending_follow.kind = w.kind;
+ if (random_signal) /* I.e., no catchpoint triggered for this. */
+ {
+ trap_expected = 1;
+ stop_signal = TARGET_SIGNAL_0;
+ goto keep_going;
+ }
+ }
+
/* For the program's own signals, act according to
the signal handling tables. */
-
+
if (random_signal)
{
/* Signal not for debugging purposes. */
stopped_by_random_signal = 1;
- if (stop_signal >= NSIG
- || signal_print[stop_signal])
+ if (signal_print[stop_signal])
{
printed = 1;
target_terminal_ours_for_output ();
-#ifdef PRINT_RANDOM_SIGNAL
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
- printf ("\nProgram received signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
-#endif /* PRINT_RANDOM_SIGNAL */
- fflush (stdout);
+ annotate_signal ();
+ printf_filtered ("\nProgram received signal ");
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+ gdb_flush (gdb_stdout);
}
- if (stop_signal >= NSIG
- || signal_stop[stop_signal])
+ if (signal_stop[stop_signal])
break;
/* If not going to stop, give terminal back
if we took it away. */
else if (printed)
target_terminal_inferior ();
- /* Note that virtually all the code below does `if !random_signal'.
- Perhaps this code should end with a goto or continue. At least
- one (now fixed) bug was caused by this -- a !random_signal was
- missing in one of the tests below. */
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
+
+ /* If we're in the middle of a "next" command, let the code for
+ stepping over a function handle this. pai/1997-09-10
+
+ A previous comment here suggested it was possible to change
+ this to jump to keep_going in all cases. */
+
+ if (step_over_calls > 0)
+ goto step_over_function;
+ else
+ goto check_sigtramp2;
}
-
+
/* Handle cases caused by hitting a breakpoint. */
-
- if (!random_signal
- && (bpstat_explains_signal (stop_bpstat) || stop_step_resume_break))
- {
- /* Does a breakpoint want us to stop? */
- if (bpstat_stop (stop_bpstat))
- {
- stop_print_frame = bpstat_should_print (stop_bpstat);
- break;
- }
- /* But if we have hit the step-resumption breakpoint,
- remove it. It has done its job getting us here.
- The sp test is to make sure that we don't get hung
- up in recursive calls in functions without frame
- pointers. If the stack pointer isn't outside of
- where the breakpoint was set (within a routine to be
- stepped over), we're in the middle of a recursive
- call. Not true for reg window machines (sparc)
- because the must change frames to call things and
- the stack pointer doesn't have to change if it
- the bp was set in a routine without a frame (pc can
- be stored in some other window).
-
- The removal of the sp test is to allow calls to
- alloca. Nasty things were happening. Oh, well,
- gdb can only handle one level deep of lack of
- frame pointer. */
- if (stop_step_resume_break
- && (step_frame_address == 0
- || (stop_frame_address == step_frame_address)))
- {
- remove_step_breakpoint ();
- step_resume_break_address = 0;
+ {
+ CORE_ADDR jmp_buf_pc;
+ struct bpstat_what what;
- /* If were waiting for a trap, hitting the step_resume_break
- doesn't count as getting it. */
- if (trap_expected)
- another_trap = 1;
- }
- /* Otherwise, must remove breakpoints and single-step
- to get us past the one we hit. */
- else
- {
- remove_breakpoints ();
- remove_step_breakpoint ();
- breakpoints_inserted = 0;
- another_trap = 1;
- }
-
- /* We come here if we hit a breakpoint but should not
- stop for it. Possibly we also were stepping
- and should stop for that. So fall through and
- test for stepping. But, if not stepping,
- do not stop. */
- }
-
- /* If this is the breakpoint at the end of a stack dummy,
- just stop silently. */
- if (!random_signal
- && PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address))
+ what = bpstat_what (stop_bpstat);
+
+ if (what.call_dummy)
{
- stop_print_frame = 0;
stop_stack_dummy = 1;
#ifdef HP_OS_BUG
trap_expected_after_continue = 1;
#endif
+ }
+
+ switch (what.main_action)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp, disable it for the
+ duration of this command. Then, install a temporary
+ breakpoint at the target of the jmp_buf. */
+ disable_longjmp_breakpoint();
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
+
+ /* Need to blow away step-resume breakpoint, as it
+ interferes with us */
+ if (step_resume_breakpoint != NULL)
+ {
+ delete_breakpoint (step_resume_breakpoint);
+ step_resume_breakpoint = NULL;
+ }
+ /* Not sure whether we need to blow this away too, but probably
+ it is like the step-resume breakpoint. */
+ if (through_sigtramp_breakpoint != NULL)
+ {
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
+ }
+
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls > 0)
+ set_longjmp_resume_breakpoint(jmp_buf_pc,
+ get_current_frame());
+ else
+#endif /* 0 */
+ set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
+ handling_longjmp = 1; /* FIXME */
+ goto keep_going;
+
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls
+ && (INNER_THAN (FRAME_FP (get_current_frame ()),
+ step_frame_address)))
+ {
+ another_trap = 1;
+ goto keep_going;
+ }
+#endif /* 0 */
+ disable_longjmp_breakpoint();
+ handling_longjmp = 0; /* FIXME */
+ if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
+ break;
+ /* else fallthrough */
+
+ case BPSTAT_WHAT_SINGLE:
+ if (breakpoints_inserted)
+ {
+ thread_step_needed = 1;
+ remove_breakpoints ();
+ }
+ breakpoints_inserted = 0;
+ another_trap = 1;
+ /* Still need to check other stuff, at least the case
+ where we are stepping and step out of the right range. */
+ break;
+
+ case BPSTAT_WHAT_STOP_NOISY:
+ stop_print_frame = 1;
+
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STOP_SILENT:
+ stop_print_frame = 0;
+
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STEP_RESUME:
+ /* This proably demands a more elegant solution, but, yeah
+ right...
+
+ This function's use of the simple variable
+ step_resume_breakpoint doesn't seem to accomodate
+ simultaneously active step-resume bp's, although the
+ breakpoint list certainly can.
+
+ If we reach here and step_resume_breakpoint is already
+ NULL, then apparently we have multiple active
+ step-resume bp's. We'll just delete the breakpoint we
+ stopped at, and carry on. */
+ if (step_resume_breakpoint == NULL)
+ {
+ step_resume_breakpoint =
+ bpstat_find_step_resume_breakpoint (stop_bpstat);
+ }
+ delete_breakpoint (step_resume_breakpoint);
+ step_resume_breakpoint = NULL;
+ break;
+
+ case BPSTAT_WHAT_THROUGH_SIGTRAMP:
+ if (through_sigtramp_breakpoint)
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
+
+ /* If were waiting for a trap, hitting the step_resume_break
+ doesn't count as getting it. */
+ if (trap_expected)
+ another_trap = 1;
+ break;
+
+ case BPSTAT_WHAT_CHECK_SHLIBS:
+ case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
+#ifdef SOLIB_ADD
+ {
+ extern int auto_solib_add;
+
+ /* Remove breakpoints, we eventually want to step over the
+ shlib event breakpoint, and SOLIB_ADD might adjust
+ breakpoint addresses via breakpoint_re_set. */
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+
+ /* Check for any newly added shared libraries if we're
+ supposed to be adding them automatically. */
+ if (auto_solib_add)
+ {
+ /* Switch terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL);
+ target_terminal_inferior ();
+ }
+
+ /* Try to reenable shared library breakpoints, additional
+ code segments in shared libraries might be mapped in now. */
+ re_enable_breakpoints_in_shlibs ();
+
+ /* If requested, stop when the dynamic linker notifies
+ gdb of events. This allows the user to get control
+ and place breakpoints in initializer routines for
+ dynamically loaded objects (among other things). */
+ if (stop_on_solib_events)
+ {
+ stop_print_frame = 0;
+ goto stop_stepping;
+ }
+
+ /* If we stopped due to an explicit catchpoint, then the
+ (see above) call to SOLIB_ADD pulled in any symbols
+ from a newly-loaded library, if appropriate.
+
+ We do want the inferior to stop, but not where it is
+ now, which is in the dynamic linker callback. Rather,
+ we would like it stop in the user's program, just after
+ the call that caused this catchpoint to trigger. That
+ gives the user a more useful vantage from which to
+ examine their program's state. */
+ else if (what.main_action == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+ {
+ /* ??rehrauer: If I could figure out how to get the
+ right return PC from here, we could just set a temp
+ breakpoint and resume. I'm not sure we can without
+ cracking open the dld's shared libraries and sniffing
+ their unwind tables and text/data ranges, and that's
+ not a terribly portable notion.
+
+ Until that time, we must step the inferior out of the
+ dld callback, and also out of the dld itself (and any
+ code or stubs in libdld.sl, such as "shl_load" and
+ friends) until we reach non-dld code. At that point,
+ we can stop stepping. */
+ bpstat_get_triggered_catchpoints (stop_bpstat,
+ &stepping_through_solib_catchpoints);
+ stepping_through_solib_after_catch = 1;
+
+ /* Be sure to lift all breakpoints, so the inferior does
+ actually step past this point... */
+ another_trap = 1;
+ break;
+ }
+ else
+ {
+ /* We want to step over this breakpoint, then keep going. */
+ another_trap = 1;
+ break;
+ }
+ }
+#endif
+ break;
+
+ case BPSTAT_WHAT_LAST:
+ /* Not a real code, but listed here to shut up gcc -Wall. */
+
+ case BPSTAT_WHAT_KEEP_CHECKING:
break;
}
-
- if (step_resume_break_address)
+ }
+
+ /* We come here if we hit a breakpoint but should not
+ stop for it. Possibly we also were stepping
+ and should stop for that. So fall through and
+ test for stepping. But, if not stepping,
+ do not stop. */
+
+ /* Are we stepping to get the inferior out of the dynamic
+ linker's hook (and possibly the dld itself) after catching
+ a shlib event? */
+ if (stepping_through_solib_after_catch)
+ {
+#if defined(SOLIB_ADD)
+ /* Have we reached our destination? If not, keep going. */
+ if (SOLIB_IN_DYNAMIC_LINKER (pid, stop_pc))
+ {
+ another_trap = 1;
+ goto keep_going;
+ }
+#endif
+ /* Else, stop and report the catchpoint(s) whose triggering
+ caused us to begin stepping. */
+ stepping_through_solib_after_catch = 0;
+ bpstat_clear (&stop_bpstat);
+ stop_bpstat = bpstat_copy (stepping_through_solib_catchpoints);
+ bpstat_clear (&stepping_through_solib_catchpoints);
+ stop_print_frame = 1;
+ goto stop_stepping;
+ }
+
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ /* This is the old way of detecting the end of the stack dummy.
+ An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets
+ handled above. As soon as we can test it on all of them, all
+ architectures should define it. */
+
+ /* If this is the breakpoint at the end of a stack dummy,
+ just stop silently, unless the user was doing an si/ni, in which
+ case she'd better know what she's doing. */
+
+ if (CALL_DUMMY_HAS_COMPLETED (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+ && !step_range_end)
+ {
+ stop_print_frame = 0;
+ stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 1;
+#endif
+ break;
+ }
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+
+ if (step_resume_breakpoint)
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
- ;
- /* If stepping through a line, keep going if still within it. */
- else if (!random_signal
- && step_range_end
- && stop_pc >= step_range_start
- && stop_pc < step_range_end
- /* The step range might include the start of the
- function, so if we are at the start of the
- step range and either the stack or frame pointers
- just changed, we've stepped outside */
- && !(stop_pc == step_range_start
- && stop_frame_address
- && (stop_sp INNER_THAN prev_sp
- || stop_frame_address != step_frame_address)))
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+
+ if (step_range_end == 0)
+ /* Likewise if we aren't even stepping. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
+ goto check_sigtramp2;
+
+ /* If stepping through a line, keep going if still within it.
+
+ Note that step_range_end is the address of the first instruction
+ beyond the step range, and NOT the address of the last instruction
+ within it! */
+ if (stop_pc >= step_range_start
+ && stop_pc < step_range_end
+#if 0
+/* I haven't a clue what might trigger this clause, and it seems wrong
+ anyway, so I've disabled it until someone complains. -Stu 10/24/95 */
+
+ /* The step range might include the start of the
+ function, so if we are at the start of the
+ step range and either the stack or frame pointers
+ just changed, we've stepped outside */
+ && !(stop_pc == step_range_start
+ && FRAME_FP (get_current_frame ())
+ && (INNER_THAN (read_sp (), step_sp)
+ || FRAME_FP (get_current_frame ()) != step_frame_address))
+#endif
+)
{
+ /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
+ So definately need to check for sigtramp here. */
+ goto check_sigtramp2;
+ }
+
+ /* We stepped out of the stepping range. */
+
+ /* If we are stepping at the source level and entered the runtime
+ loader dynamic symbol resolution code, we keep on single stepping
+ until we exit the run time loader code and reach the callee's
+ address. */
+ if (step_over_calls < 0 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc))
+ goto keep_going;
+
+ /* We can't update step_sp every time through the loop, because
+ reading the stack pointer would slow down stepping too much.
+ But we can update it every time we leave the step range. */
+ update_step_sp = 1;
+
+ /* Did we just take a signal? */
+ if (IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && INNER_THAN (read_sp (), step_sp))
+ {
+ /* We've just taken a signal; go until we are back to
+ the point where we took it and one more. */
+
+ /* Note: The test above succeeds not only when we stepped
+ into a signal handler, but also when we step past the last
+ statement of a signal handler and end up in the return stub
+ of the signal handler trampoline. To distinguish between
+ these two cases, check that the frame is INNER_THAN the
+ previous one below. pai/1997-09-11 */
+
+
+ {
+ CORE_ADDR current_frame = FRAME_FP (get_current_frame());
+
+ if (INNER_THAN (current_frame, step_frame_address))
+ {
+ /* We have just taken a signal; go until we are back to
+ the point where we took it and one more. */
+
+ /* This code is needed at least in the following case:
+ The user types "next" and then a signal arrives (before
+ the "next" is done). */
+
+ /* Note that if we are stopped at a breakpoint, then we need
+ the step_resume breakpoint to override any breakpoints at
+ the same location, so that we will still step over the
+ breakpoint even though the signal happened. */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL(&sr_sal);
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ sr_sal.pc = prev_pc;
+ /* We could probably be setting the frame to
+ step_frame_address; I don't think anyone thought to
+ try it. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+ else
+ {
+ /* We just stepped out of a signal handler and into
+ its calling trampoline.
+
+ Normally, we'd jump to step_over_function from
+ here, but for some reason GDB can't unwind the
+ stack correctly to find the real PC for the point
+ user code where the signal trampoline will return
+ -- FRAME_SAVED_PC fails, at least on HP-UX 10.20.
+ But signal trampolines are pretty small stubs of
+ code, anyway, so it's OK instead to just
+ single-step out. Note: assuming such trampolines
+ don't exhibit recursion on any platform... */
+ find_pc_partial_function (stop_pc, &stop_func_name,
+ &stop_func_start,
+ &stop_func_end);
+ /* Readjust stepping range */
+ step_range_start = stop_func_start;
+ step_range_end = stop_func_end;
+ stepping_through_sigtramp = 1;
+ }
+ }
+
+
+ /* If this is stepi or nexti, make sure that the stepping range
+ gets us past that instruction. */
+ if (step_range_end == 1)
+ /* FIXME: Does this run afoul of the code below which, if
+ we step into the middle of a line, resets the stepping
+ range? */
+ step_range_end = (step_range_start = prev_pc) + 1;
+
+ remove_breakpoints_on_following_step = 1;
+ goto keep_going;
+ }
+
#if 0
- /* When "next"ing through a function,
- This causes an extra stop at the end.
- Is there any reason for this?
- It's confusing to the user. */
- /* Don't step through the return from a function
- unless that is the first instruction stepped through. */
- if (ABOUT_TO_RETURN (stop_pc))
+ /* I disabled this test because it was too complicated and slow.
+ The SKIP_PROLOGUE was especially slow, because it caused
+ unnecessary prologue examination on various architectures.
+ The code in the #else clause has been tested on the Sparc,
+ Mips, PA, and Power architectures, so it's pretty likely to
+ be correct. -Stu 10/24/95 */
+
+ /* See if we left the step range due to a subroutine call that
+ we should proceed to the end of. */
+
+ if (stop_func_start)
+ {
+ struct symtab *s;
+
+ /* Do this after the IN_SIGTRAMP check; it might give
+ an error. */
+ prologue_pc = stop_func_start;
+
+ /* Don't skip the prologue if this is assembly source */
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (prologue_pc);
+ }
+
+ if (!(INNER_THAN (step_sp, read_sp ())) /* don't mistake (sig)return
+ as a call */
+ && (/* Might be a non-recursive call. If the symbols are missing
+ enough that stop_func_start == prev_func_start even though
+ they are really two functions, we will treat some calls as
+ jumps. */
+ stop_func_start != prev_func_start
+
+ /* Might be a recursive call if either we have a prologue
+ or the call instruction itself saves the PC on the stack. */
+ || prologue_pc != stop_func_start
+ || read_sp () != step_sp)
+ && (/* PC is completely out of bounds of any known objfiles. Treat
+ like a subroutine call. */
+ ! stop_func_start
+
+ /* If we do a call, we will be at the start of a function... */
+ || stop_pc == stop_func_start
+
+ /* ...except on the Alpha with -O (and also Irix 5 and
+ perhaps others), in which we might call the address
+ after the load of gp. Since prologues don't contain
+ calls, we can't return to within one, and we don't
+ jump back into them, so this check is OK. */
+
+ || stop_pc < prologue_pc
+
+ /* ...and if it is a leaf function, the prologue might
+ consist of gp loading only, so the call transfers to
+ the first instruction after the prologue. */
+ || (stop_pc == prologue_pc
+
+ /* Distinguish this from the case where we jump back
+ to the first instruction after the prologue,
+ within a function. */
+ && stop_func_start != prev_func_start)
+
+ /* If we end up in certain places, it means we did a subroutine
+ call. I'm not completely sure this is necessary now that we
+ have the above checks with stop_func_start (and now that
+ find_pc_partial_function is pickier). */
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+
+ /* If none of the above apply, it is a jump within a function,
+ or a return from a subroutine. The other case is longjmp,
+ which can no longer happen here as long as the
+ handling_longjmp stuff is working. */
+ ))
+#else
+ /* This test is a much more streamlined, (but hopefully correct)
+ replacement for the code above. It's been tested on the Sparc,
+ Mips, PA, and Power architectures with good results. */
+
+ if (stop_pc == stop_func_start /* Quick test */
+ || (in_prologue (stop_pc, stop_func_start) &&
+ ! IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, stop_func_name))
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+ || stop_func_name == 0)
+#endif
+
+ {
+ /* It's a subroutine call. */
+
+ if (step_over_calls == 0)
+ {
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level
+ ("stepi"). Just stop. */
+ stop_step = 1;
+ break;
+ }
+
+ if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc))
+ /* We're doing a "next". */
+ goto step_over_function;
+
+ /* If we are in a function call trampoline (a stub between
+ the calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to
+ the end of, if we do step into it. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (tmp != 0)
+ stop_func_start = tmp;
+ else
+ {
+ tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc);
+ if (tmp)
+ {
+ struct symtab_and_line xxx;
+ /* Why isn't this s_a_l called "sr_sal", like all of the
+ other s_a_l's where this code is duplicated? */
+ INIT_SAL (&xxx); /* initialize to zeroes */
+ xxx.pc = tmp;
+ xxx.section = find_pc_overlay (xxx.pc);
+ step_resume_breakpoint =
+ set_momentary_breakpoint (xxx, NULL, bp_step_resume);
+ insert_breakpoints ();
+ goto keep_going;
+ }
+ }
+
+ /* If we have line number information for the function we
+ are thinking of stepping into, step into it.
+
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
+ {
+ struct symtab_and_line tmp_sal;
+
+ tmp_sal = find_pc_line (stop_func_start, 0);
+ if (tmp_sal.line != 0)
+ goto step_into_function;
+ }
+
+step_over_function:
+ /* A subroutine call has happened. */
+ {
+ /* Set a special breakpoint after the return */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL(&sr_sal);
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+
+ /* If we came here after encountering a signal in the middle of
+ a "next", use the stashed-away previous frame pc */
+ sr_sal.pc
+ = stopped_by_random_signal
+ ? prev_pc
+ : ADDR_BITS_REMOVE (SAVED_PC_AFTER_CALL (get_current_frame ()));
+
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal,
+ stopped_by_random_signal ?
+ NULL : get_current_frame (),
+ bp_step_resume);
+
+ /* We've just entered a callee, and we wish to resume until
+ it returns to the caller. Setting a step_resume bp on
+ the return PC will catch a return from the callee.
+
+ However, if the callee is recursing, we want to be
+ careful not to catch returns of those recursive calls,
+ but of THIS instance of the call.
+
+ To do this, we set the step_resume bp's frame to our
+ current caller's frame (step_frame_address, which is
+ set by the "next" or "until" command, before execution
+ begins).
+
+ But ... don't do it if we're single-stepping out of a
+ sigtramp, because the reason we're single-stepping is
+ precisely because unwinding is a problem (HP-UX 10.20,
+ e.g.) and the frame address is likely to be incorrect.
+ No danger of sigtramp recursion. */
+
+ if (stepping_through_sigtramp)
+ {
+ step_resume_breakpoint->frame = (CORE_ADDR) NULL;
+ stepping_through_sigtramp = 0;
+ }
+ else if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
+ step_resume_breakpoint->frame = step_frame_address;
+
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+ }
+ goto keep_going;
+
+step_into_function:
+ /* Subroutine call with source code we should not step over.
+ Do step to the first line of code in it. */
+ {
+ struct symtab *s;
+
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (stop_func_start);
+ }
+ sal = find_pc_line (stop_func_start, 0);
+ /* Use the step_resume_break to step until
+ the end of the prologue, even if that involves jumps
+ (as it seems to on the vax under 4.2). */
+ /* If the prologue ends in the middle of a source line,
+ continue to the end of that source line (if it is still
+ within the function). Otherwise, just go to end of prologue. */
+#ifdef PROLOGUE_FIRSTLINE_OVERLAP
+ /* no, don't either. It skips any code that's
+ legitimately on the first line. */
+#else
+ if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end)
+ stop_func_start = sal.end;
+#endif
+
+ if (stop_func_start == stop_pc)
{
+ /* We are already there: stop now. */
stop_step = 1;
break;
}
-#endif
+ else
+ /* Put the step-breakpoint there and go until there. */
+ {
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = stop_func_start;
+ sr_sal.section = find_pc_overlay (stop_func_start);
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* And make sure stepping stops right away then. */
+ step_range_end = step_range_start;
+ }
+ goto keep_going;
}
+
+ /* We've wandered out of the step range. */
+
+ sal = find_pc_line(stop_pc, 0);
- /* We stepped out of the stepping range. See if that was due
- to a subroutine call that we should proceed to the end of. */
- else if (!random_signal && step_range_end)
+ if (step_range_end == 1)
{
- if (stop_func_start)
- {
- prologue_pc = stop_func_start;
- SKIP_PROLOGUE (prologue_pc);
- }
+ /* It is stepi or nexti. We always want to stop stepping after
+ one instruction. */
+ stop_step = 1;
+ break;
+ }
- /* Did we just take a signal? */
- if (IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ /* If we're in the return path from a shared library trampoline,
+ we want to proceed through the trampoline when stepping. */
+ if (IN_SOLIB_RETURN_TRAMPOLINE(stop_pc, stop_func_name))
+ {
+ CORE_ADDR tmp;
+
+ /* Determine where this trampoline returns. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+
+ /* Only proceed through if we know where it's going. */
+ if (tmp)
{
- /* This code is needed at least in the following case:
- The user types "next" and then a signal arrives (before
- the "next" is done). */
- /* We've just taken a signal; go until we are back to
- the point where we took it and one more. */
- step_resume_break_address = prev_pc;
- step_resume_break_duplicate =
- breakpoint_here_p (step_resume_break_address);
+ /* And put the step-breakpoint there and go until there. */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = tmp;
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Make sure that the stepping range gets us past
- that instruction. */
- if (step_range_end == 1)
- step_range_end = (step_range_start = prev_pc) + 1;
- remove_breakpoints_on_following_step = 1;
- }
+ insert_breakpoints ();
- /* ==> See comments at top of file on this algorithm. <==*/
-
- else if (stop_pc == stop_func_start
- && (stop_func_start != prev_func_start
- || prologue_pc != stop_func_start
- || stop_sp != prev_sp))
- {
- /* It's a subroutine call */
- if (step_over_calls > 0
- || (step_over_calls && find_pc_function (stop_pc) == 0))
- {
- /* A subroutine call has happened. */
- /* Set a special breakpoint after the return */
- step_resume_break_address =
- ADDR_BITS_REMOVE
- (SAVED_PC_AFTER_CALL (get_current_frame ()));
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- }
- /* Subroutine call with source code we should not step over.
- Do step to the first line of code in it. */
- else if (step_over_calls)
- {
- SKIP_PROLOGUE (stop_func_start);
- sal = find_pc_line (stop_func_start, 0);
- /* Use the step_resume_break to step until
- the end of the prologue, even if that involves jumps
- (as it seems to on the vax under 4.2). */
- /* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
-#ifdef PROLOGUE_FIRSTLINE_OVERLAP
- /* no, don't either. It skips any code that's
- legitimately on the first line. */
-#else
- if (sal.end && sal.pc != stop_func_start)
- stop_func_start = sal.end;
-#endif
-
- if (stop_func_start == stop_pc)
- {
- /* We are already there: stop now. */
- stop_step = 1;
- break;
- }
- else
- /* Put the step-breakpoint there and go until there. */
- {
- step_resume_break_address = stop_func_start;
-
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- step_frame_address = 0;
- /* And make sure stepping stops right away then. */
- step_range_end = step_range_start;
- }
- }
- else
- {
- /* We get here only if step_over_calls is 0 and we
- just stepped into a subroutine. I presume
- that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly
- language level.*/
- stop_step = 1;
- break;
- }
- }
- /* No subroutine call; stop now. */
- else
- {
- /* We've wandered out of the step range (but we haven't done a
- subroutine call or return (that's handled elsewhere)). We
- don't really want to stop until we encounter the start of a
- new statement. If so, we stop. Otherwise, we reset
- step_range_start and step_range_end, and just continue. */
- sal = find_pc_line(stop_pc, 0);
-
- if (step_range_end == 1 || /* Don't do this for stepi/nexti */
- sal.line == 0 || /* Stop now if no line # info */
- (current_line != sal.line
- && stop_pc == sal.pc)) {
- stop_step = 1;
- break;
- } else {
- /* This is probably not necessary, but it probably makes
- stepping more efficient, as we avoid calling find_pc_line()
- for each instruction we step over. */
- step_range_start = sal.pc;
- step_range_end = sal.end;
- }
+ /* Restart without fiddling with the step ranges or
+ other state. */
+ goto keep_going;
}
}
+
+ if (sal.line == 0)
+ {
+ /* We have no line number information. That means to stop
+ stepping (does this always happen right after one instruction,
+ when we do "s" in a function with no line numbers,
+ or can this happen as a result of a return or longjmp?). */
+ stop_step = 1;
+ break;
+ }
+
+ if ((stop_pc == sal.pc)
+ && (current_line != sal.line || current_symtab != sal.symtab))
+ {
+ /* We are at the start of a different line. So stop. Note that
+ we don't stop if we step into the middle of a different line.
+ That is said to make things like for (;;) statements work
+ better. */
+ stop_step = 1;
+ break;
+ }
+
+ /* We aren't done stepping.
+
+ Optimize by setting the stepping range to the line.
+ (We might not be in the original line, but if we entered a
+ new line in mid-statement, we continue stepping. This makes
+ things like for(;;) statements work better.) */
+
+ if (stop_func_end && sal.end >= stop_func_end)
+ {
+ /* If this is the last line of the function, don't keep stepping
+ (it would probably step us out of the function).
+ This is particularly necessary for a one-line function,
+ in which after skipping the prologue we better stop even though
+ we will be in mid-line. */
+ stop_step = 1;
+ break;
+ }
+ step_range_start = sal.pc;
+ step_range_end = sal.end;
+ step_frame_address = FRAME_FP (get_current_frame ());
+ current_line = sal.line;
+ current_symtab = sal.symtab;
+
+ /* In the case where we just stepped out of a function into the middle
+ of a line of the caller, continue stepping, but step_frame_address
+ must be modified to current frame */
+ {
+ CORE_ADDR current_frame = FRAME_FP (get_current_frame());
+ if (!(INNER_THAN (current_frame, step_frame_address)))
+ step_frame_address = current_frame;
+ }
+
- else if (trap_expected
- && IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ goto keep_going;
+
+ check_sigtramp2:
+ if (trap_expected
+ && IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && INNER_THAN (read_sp (), step_sp))
{
/* What has happened here is that we have just stepped the inferior
with a signal (because it is a signal which shouldn't make
us stop), thus stepping into sigtramp.
So we need to set a step_resume_break_address breakpoint
- and continue until we hit it, and then step. */
- step_resume_break_address = prev_pc;
- /* Always 1, I think, but it's probably easier to have
- the step_resume_break as usual rather than trying to
- re-use the breakpoint which is already there. */
- step_resume_break_duplicate =
- breakpoint_here_p (step_resume_break_address);
+ and continue until we hit it, and then step. FIXME: This should
+ be more enduring than a step_resume breakpoint; we should know
+ that we will later need to keep going rather than re-hitting
+ the breakpoint here (see testsuite/gdb.t06/signals.exp where
+ it says "exceedingly difficult"). */
+ struct symtab_and_line sr_sal;
+
+ INIT_SAL (&sr_sal); /* initialize to zeroes */
+ sr_sal.pc = prev_pc;
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+ /* We perhaps could set the frame if we kept track of what
+ the frame corresponding to prev_pc was. But we don't,
+ so don't. */
+ through_sigtramp_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
if (breakpoints_inserted)
- insert_step_breakpoint ();
+ insert_breakpoints ();
+
remove_breakpoints_on_following_step = 1;
another_trap = 1;
}
+ keep_going:
+ /* Come to this label when you need to resume the inferior.
+ It's really much cleaner to do a goto than a maze of if-else
+ conditions. */
+
+ /* ??rehrauer: ttrace on HP-UX theoretically allows one to debug
+ a vforked child beetween its creation and subsequent exit or
+ call to exec(). However, I had big problems in this rather
+ creaky exec engine, getting that to work. The fundamental
+ problem is that I'm trying to debug two processes via an
+ engine that only understands a single process with possibly
+ multiple threads.
+
+ Hence, this spot is known to have problems when
+ target_can_follow_vfork_prior_to_exec returns 1. */
+
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER
been at the start of a
function. */
prev_func_name = stop_func_name;
- prev_sp = stop_sp;
+
+ if (update_step_sp)
+ step_sp = read_sp ();
+ update_step_sp = 0;
/* If we did not do break;, it means we should keep
running the inferior and not return to debugger. */
- if (trap_expected && stop_signal != SIGTRAP)
+ if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd have done a break above) and we
haven't yet gotten our trap. Simply continue. */
- resume ((step_range_end && !step_resume_break_address)
- || (trap_expected && !step_resume_break_address)
- || bpstat_should_step (),
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
else
{
to one-proceed past a breakpoint. */
/* If we've just finished a special step resume and we don't
want to hit a breakpoint, pull em out. */
-#ifdef TDESC
- if (!tdesc_handle)
- {
- init_tdesc();
- safe_to_init_tdesc_context = 1;
- }
-#endif
-
- if (!step_resume_break_address &&
- remove_breakpoints_on_following_step)
+ if (step_resume_breakpoint == NULL
+ && through_sigtramp_breakpoint == NULL
+ && remove_breakpoints_on_following_step)
{
remove_breakpoints_on_following_step = 0;
remove_breakpoints ();
breakpoints_inserted = 0;
}
else if (!breakpoints_inserted &&
- (step_resume_break_address != NULL || !another_trap))
+ (through_sigtramp_breakpoint != NULL || !another_trap))
{
- insert_step_breakpoint ();
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
break;
trap_expected = another_trap;
- if (stop_signal == SIGTRAP)
- stop_signal = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ stop_signal = TARGET_SIGNAL_0;
#ifdef SHIFT_INST_REGS
- /* I'm not sure when this following segment applies. I do know, now,
- that we shouldn't rewrite the regs when we were stopped by a
- random signal from the inferior process. */
+ /* I'm not sure when this following segment applies. I do know,
+ now, that we shouldn't rewrite the regs when we were stopped
+ by a random signal from the inferior process. */
+ /* FIXME: Shouldn't this be based on the valid bit of the SXIP?
+ (this is only used on the 88k). */
if (!bpstat_explains_signal (stop_bpstat)
- && (stop_signal != SIGCLD)
+ && (stop_signal != TARGET_SIGNAL_CHLD)
&& !stopped_by_random_signal)
- {
- CORE_ADDR pc_contents = read_register (PC_REGNUM);
- CORE_ADDR npc_contents = read_register (NPC_REGNUM);
- if (pc_contents != npc_contents)
- {
- write_register (NNPC_REGNUM, npc_contents);
- write_register (NPC_REGNUM, pc_contents);
- }
- }
+ SHIFT_INST_REGS();
#endif /* SHIFT_INST_REGS */
- resume ((step_range_end && !step_resume_break_address)
- || (trap_expected && !step_resume_break_address)
- || bpstat_should_step (),
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
}
+
+ stop_stepping:
if (target_has_execution)
{
+ /* Are we stopping for a vfork event? We only stop when we see
+ the child's event. However, we may not yet have seen the
+ parent's event. And, inferior_pid is still set to the parent's
+ pid, until we resume again and follow either the parent or child.
+
+ To ensure that we can really touch inferior_pid (aka, the
+ parent process) -- which calls to functions like read_pc
+ implicitly do -- wait on the parent if necessary. */
+ if ((pending_follow.kind == TARGET_WAITKIND_VFORKED)
+ && ! pending_follow.fork_event.saw_parent_fork)
+ {
+ int parent_pid;
+
+ do {
+ if (target_wait_hook)
+ parent_pid = target_wait_hook (-1, &w);
+ else
+ parent_pid = target_wait (-1, &w);
+ } while (parent_pid != inferior_pid);
+ }
+
+
/* Assuming the inferior still exists, set these up for next
time, just like we did above if we didn't break out of the
loop. */
prev_pc = read_pc ();
prev_func_start = stop_func_start;
prev_func_name = stop_func_name;
- prev_sp = stop_sp;
}
+ do_cleanups (old_cleanups);
+}
+
+/* This function returns TRUE if ep is an internal breakpoint
+ set to catch generic shared library (aka dynamically-linked
+ library) events. (This is *NOT* the same as a catchpoint for a
+ shlib event. The latter is something a user can set; this is
+ something gdb sets for its own use, and isn't ever shown to a
+ user.) */
+static int
+is_internal_shlib_eventpoint (ep)
+ struct breakpoint * ep;
+{
+ return
+ (ep->type == bp_shlib_event)
+ ;
+}
+
+/* This function returns TRUE if bs indicates that the inferior
+ stopped due to a shared library (aka dynamically-linked library)
+ event. */
+static int
+stopped_for_internal_shlib_event (bs)
+ bpstat bs;
+{
+ /* Note that multiple eventpoints may've caused the stop. Any
+ that are associated with shlib events will be accepted. */
+ for (;bs != NULL; bs = bs->next)
+ {
+ if ((bs->breakpoint_at != NULL)
+ && is_internal_shlib_eventpoint (bs->breakpoint_at))
+ return 1;
+ }
+
+ /* If we get here, then no candidate was found. */
+ return 0;
+}
+
+/* This function returns TRUE if bs indicates that the inferior
+ stopped due to a shared library (aka dynamically-linked library)
+ event caught by a catchpoint.
+
+ If TRUE, cp_p is set to point to the catchpoint.
+
+ Else, the value of cp_p is undefined. */
+static int
+stopped_for_shlib_catchpoint (bs, cp_p)
+ bpstat bs;
+ struct breakpoint ** cp_p;
+{
+ /* Note that multiple eventpoints may've caused the stop. Any
+ that are associated with shlib events will be accepted. */
+ *cp_p = NULL;
+
+ for (;bs != NULL; bs = bs->next)
+ {
+ if ((bs->breakpoint_at != NULL)
+ && ep_is_shlib_catchpoint (bs->breakpoint_at))
+ {
+ *cp_p = bs->breakpoint_at;
+ return 1;
+ }
+ }
+
+ /* If we get here, then no candidate was found. */
+ return 0;
}
+
\f
/* Here to return control to GDB when the inferior stops for real.
Print appropriate messages, remove breakpoints, give terminal our modes.
void
normal_stop ()
{
+
+#ifdef HPUXHPPA
+ /* As with the notification of thread events, we want to delay
+ notifying the user that we've switched thread context until
+ the inferior actually stops.
+
+ (Note that there's no point in saying anything if the inferior
+ has exited!) */
+ if ((switched_from_inferior_pid != inferior_pid) &&
+ target_has_execution)
+ {
+ target_terminal_ours_for_output ();
+ printf_filtered ("[Switched to %s]\n",
+ target_pid_or_tid_to_str (inferior_pid));
+ switched_from_inferior_pid = inferior_pid;
+ }
+#endif
+
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
DECR_PC_AFTER_BREAK */
- if (target_has_execution)
+ if (target_has_execution && get_current_frame())
(get_current_frame ())->pc = read_pc ();
if (breakpoints_failed)
{
target_terminal_ours_for_output ();
print_sys_errmsg ("ptrace", breakpoints_failed);
- printf ("Stopped; cannot insert breakpoints.\n\
+ printf_filtered ("Stopped; cannot insert breakpoints.\n\
The same program may be running in another process.\n");
}
- if (target_has_execution)
- remove_step_breakpoint ();
-
if (target_has_execution && breakpoints_inserted)
+ {
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf ("Cannot remove breakpoints because program is no longer writable.\n\
-It might be running in another process.\n\
-Further execution is probably impossible.\n");
+ printf_filtered ("Cannot remove breakpoints because ");
+ printf_filtered ("program is no longer writable.\n");
+ printf_filtered ("It might be running in another process.\n");
+ printf_filtered ("Further execution is probably impossible.\n");
}
-
+ }
breakpoints_inserted = 0;
/* Delete the breakpoint we stopped at, if it wants to be deleted.
if (stopped_by_random_signal)
disable_current_display ();
+ /* Don't print a message if in the middle of doing a "step n"
+ operation for n > 1 */
if (step_multi && stop_step)
- return;
+ goto done;
target_terminal_ours ();
+ /* Did we stop because the user set the stop_on_solib_events
+ variable? (If so, we report this as a generic, "Stopped due
+ to shlib event" message.) */
+ if (stopped_for_internal_shlib_event (stop_bpstat))
+ {
+ printf_filtered ("Stopped due to shared library event\n");
+ }
+
+ /* Look up the hook_stop and run it if it exists. */
+
+ if (stop_command && stop_command->hook)
+ {
+ catch_errors (hook_stop_stub, (char *)stop_command->hook,
+ "Error while running hook_stop:\n", RETURN_MASK_ALL);
+ }
+
if (!target_has_stack)
- return;
+ {
+
+ goto done;
+ }
+
+ /* Select innermost stack frame - i.e., current frame is frame 0,
+ and current location is based on that.
+ Don't do this on return from a stack dummy routine,
+ or if the program has exited. */
- /* Select innermost stack frame except on return from a stack dummy routine,
- or if the program has exited. Print it without a level number if
- we have changed functions or hit a breakpoint. Print source line
- if we have one. */
if (!stop_stack_dummy)
{
select_frame (get_current_frame (), 0);
+ /* Print current location without a level number, if
+ we have changed functions or hit a breakpoint.
+ Print source line if we have one.
+ bpstat_print() contains the logic deciding in detail
+ what to print, based on the event(s) that just occurred. */
+
if (stop_print_frame)
{
- int source_only;
-
- source_only = bpstat_print (stop_bpstat);
- source_only = source_only ||
- ( stop_step
- && step_frame_address == stop_frame_address
- && step_start_function == find_pc_function (stop_pc));
-
- print_stack_frame (selected_frame, -1, source_only? -1: 1);
+ int bpstat_ret;
+ int source_flag;
+
+ bpstat_ret = bpstat_print (stop_bpstat);
+ /* bpstat_print() returned one of:
+ -1: Didn't print anything
+ 0: Printed preliminary "Breakpoint n, " message, desires
+ location tacked on
+ 1: Printed something, don't tack on location */
+
+ if (bpstat_ret == -1)
+ if ( stop_step
+ && step_frame_address == FRAME_FP (get_current_frame ())
+ && step_start_function == find_pc_function (stop_pc))
+ source_flag = -1; /* finished step, just print source line */
+ else
+ source_flag = 1; /* print location and source line */
+ else if (bpstat_ret == 0) /* hit bpt, desire location */
+ source_flag = 1; /* print location and source line */
+ else /* bpstat_ret == 1, hit bpt, do not desire location */
+ source_flag = -1; /* just print source line */
+
+ /* The behavior of this routine with respect to the source
+ flag is:
+ -1: Print only source line
+ 0: Print only location
+ 1: Print location and source line */
+ show_and_print_stack_frame (selected_frame, -1, source_flag);
/* Display the auto-display expressions. */
do_displays ();
POP_FRAME ends with a setting of the current frame, so we
can use that next. */
POP_FRAME;
+ /* Set stop_pc to what it was before we called the function.
+ Can't rely on restore_inferior_status because that only gets
+ called if we don't stop in the called function. */
+ stop_pc = read_pc();
select_frame (get_current_frame (), 0);
}
+
+
+ TUIDO (((TuiOpaqueFuncPtr)tui_vCheckDataValues, selected_frame));
+
+ done:
+ annotate_stopped ();
+}
+
+static int
+hook_stop_stub (cmd)
+ char *cmd;
+{
+ execute_user_command ((struct cmd_list_element *)cmd, 0);
+ return (0);
}
\f
-static void
-insert_step_breakpoint ()
+int signal_stop_state (signo)
+ int signo;
{
- if (step_resume_break_address && !step_resume_break_duplicate)
- target_insert_breakpoint (step_resume_break_address,
- step_resume_break_shadow);
+ return signal_stop[signo];
}
-static void
-remove_step_breakpoint ()
+int signal_print_state (signo)
+ int signo;
{
- if (step_resume_break_address && !step_resume_break_duplicate)
- target_remove_breakpoint (step_resume_break_address,
- step_resume_break_shadow);
+ return signal_print[signo];
}
-\f
+
+int signal_pass_state (signo)
+ int signo;
+{
+ return signal_program[signo];
+}
+
static void
sig_print_header ()
{
- printf_filtered ("Signal\t\tStop\tPrint\tPass to program\tDescription\n");
+ printf_filtered ("\
+Signal Stop\tPrint\tPass to program\tDescription\n");
}
static void
-sig_print_info (number)
- int number;
+sig_print_info (oursig)
+ enum target_signal oursig;
{
- char *abbrev = sig_abbrev(number);
- if (abbrev == NULL)
- printf_filtered ("%d\t\t", number);
- else
- printf_filtered ("SIG%s (%d)\t", abbrev, number);
- printf_filtered ("%s\t", signal_stop[number] ? "Yes" : "No");
- printf_filtered ("%s\t", signal_print[number] ? "Yes" : "No");
- printf_filtered ("%s\t\t", signal_program[number] ? "Yes" : "No");
- printf_filtered ("%s\n", sys_siglist[number]);
+ char *name = target_signal_to_name (oursig);
+ int name_padding = 13 - strlen (name);
+ if (name_padding <= 0)
+ name_padding = 0;
+
+ printf_filtered ("%s", name);
+ printf_filtered ("%*.*s ", name_padding, name_padding,
+ " ");
+ printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\n", target_signal_to_string (oursig));
}
/* Specify how various signals in the inferior should be handled. */
char *args;
int from_tty;
{
- register char *p = args;
- int signum = 0;
- register int digits, wordlen;
- char *nextarg;
+ char **argv;
+ int digits, wordlen;
+ int sigfirst, signum, siglast;
+ enum target_signal oursig;
+ int allsigs;
+ int nsigs;
+ unsigned char *sigs;
+ struct cleanup *old_chain;
+
+ if (args == NULL)
+ {
+ error_no_arg ("signal to handle");
+ }
+
+ /* Allocate and zero an array of flags for which signals to handle. */
- if (!args)
- error_no_arg ("signal to handle");
+ nsigs = (int)TARGET_SIGNAL_LAST;
+ sigs = (unsigned char *) alloca (nsigs);
+ memset (sigs, 0, nsigs);
- while (*p)
+ /* Break the command line up into args. */
+
+ argv = buildargv (args);
+ if (argv == NULL)
{
- /* Find the end of the next word in the args. */
- for (wordlen = 0;
- p[wordlen] && p[wordlen] != ' ' && p[wordlen] != '\t';
- wordlen++);
- /* Set nextarg to the start of the word after the one we just
- found, and null-terminate this one. */
- if (p[wordlen] == '\0')
- nextarg = p + wordlen;
- else
- {
- p[wordlen] = '\0';
- nextarg = p + wordlen + 1;
- }
-
+ nomem (0);
+ }
+ old_chain = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
- for (digits = 0; p[digits] >= '0' && p[digits] <= '9'; digits++);
+ /* Walk through the args, looking for signal oursigs, signal names, and
+ actions. Signal numbers and signal names may be interspersed with
+ actions, with the actions being performed for all signals cumulatively
+ specified. Signal ranges can be specified as <LOW>-<HIGH>. */
+
+ while (*argv != NULL)
+ {
+ wordlen = strlen (*argv);
+ for (digits = 0; isdigit ((*argv)[digits]); digits++) {;}
+ allsigs = 0;
+ sigfirst = siglast = -1;
- if (signum == 0)
+ if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
{
- /* It is the first argument--must be the signal to operate on. */
- if (digits == wordlen)
- {
- /* Numeric. */
- signum = atoi (p);
- if (signum <= 0 || signum >= NSIG)
- {
- p[wordlen] = '\0';
- error ("Invalid signal %s given as argument to \"handle\".", p);
- }
- }
- else
+ /* Apply action to all signals except those used by the
+ debugger. Silently skip those. */
+ allsigs = 1;
+ sigfirst = 0;
+ siglast = nsigs - 1;
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_stop);
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_print);
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (digits > 0)
+ {
+ /* It is numeric. The numeric signal refers to our own
+ internal signal numbering from target.h, not to host/target
+ signal number. This is a feature; users really should be
+ using symbolic names anyway, and the common ones like
+ SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */
+
+ sigfirst = siglast = (int)
+ target_signal_from_command (atoi (*argv));
+ if ((*argv)[digits] == '-')
{
- /* Symbolic. */
- signum = sig_number (p);
- if (signum == -1)
- error ("No such signal \"%s\"", p);
+ siglast = (int)
+ target_signal_from_command (atoi ((*argv) + digits + 1));
}
-
- if (signum == SIGTRAP || signum == SIGINT)
+ if (sigfirst > siglast)
{
- if (!query ("SIG%s is used by the debugger.\nAre you sure you want to change it? ", sig_abbrev (signum)))
- error ("Not confirmed.");
+ /* Bet he didn't figure we'd think of this case... */
+ signum = sigfirst;
+ sigfirst = siglast;
+ siglast = signum;
}
}
- /* Else, if already got a signal number, look for flag words
- saying what to do for it. */
- else if (!strncmp (p, "stop", wordlen))
- {
- signal_stop[signum] = 1;
- signal_print[signum] = 1;
- }
- else if (wordlen >= 2 && !strncmp (p, "print", wordlen))
- signal_print[signum] = 1;
- else if (wordlen >= 2 && !strncmp (p, "pass", wordlen))
- signal_program[signum] = 1;
- else if (!strncmp (p, "ignore", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "nostop", wordlen))
- signal_stop[signum] = 0;
- else if (wordlen >= 4 && !strncmp (p, "noprint", wordlen))
+ else
{
- signal_print[signum] = 0;
- signal_stop[signum] = 0;
+ oursig = target_signal_from_name (*argv);
+ if (oursig != TARGET_SIGNAL_UNKNOWN)
+ {
+ sigfirst = siglast = (int)oursig;
+ }
+ else
+ {
+ /* Not a number and not a recognized flag word => complain. */
+ error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ }
}
- else if (wordlen >= 4 && !strncmp (p, "nopass", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "noignore", wordlen))
- signal_program[signum] = 1;
- /* Not a number and not a recognized flag word => complain. */
- else
+
+ /* If any signal numbers or symbol names were found, set flags for
+ which signals to apply actions to. */
+
+ for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
- error ("Unrecognized flag word: \"%s\".", p);
+ switch ((enum target_signal)signum)
+ {
+ case TARGET_SIGNAL_TRAP:
+ case TARGET_SIGNAL_INT:
+ if (!allsigs && !sigs[signum])
+ {
+ if (query ("%s is used by the debugger.\n\
+Are you sure you want to change it? ",
+ target_signal_to_name
+ ((enum target_signal)signum)))
+ {
+ sigs[signum] = 1;
+ }
+ else
+ {
+ printf_unfiltered ("Not confirmed, unchanged.\n");
+ gdb_flush (gdb_stdout);
+ }
+ }
+ break;
+ case TARGET_SIGNAL_0:
+ case TARGET_SIGNAL_DEFAULT:
+ case TARGET_SIGNAL_UNKNOWN:
+ /* Make sure that "all" doesn't print these. */
+ break;
+ default:
+ sigs[signum] = 1;
+ break;
+ }
}
- /* Find start of next word. */
- p = nextarg;
- while (*p == ' ' || *p == '\t') p++;
+ argv++;
}
+ target_notice_signals(inferior_pid);
+
if (from_tty)
{
/* Show the results. */
sig_print_header ();
- sig_print_info (signum);
+ for (signum = 0; signum < nsigs; signum++)
+ {
+ if (sigs[signum])
+ {
+ sig_print_info (signum);
+ }
+ }
+ }
+
+ do_cleanups (old_chain);
+}
+
+static void
+xdb_handle_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char **argv;
+ struct cleanup *old_chain;
+
+ /* Break the command line up into args. */
+
+ argv = buildargv (args);
+ if (argv == NULL)
+ {
+ nomem (0);
}
+ old_chain = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+ if (argv[1] != (char *)NULL)
+ {
+ char *argBuf;
+ int bufLen;
+
+ bufLen = strlen(argv[0]) + 20;
+ argBuf = (char *)xmalloc(bufLen);
+ if (argBuf)
+ {
+ int validFlag = 1;
+ enum target_signal oursig;
+
+ oursig = target_signal_from_name (argv[0]);
+ memset(argBuf, 0, bufLen);
+ if (strcmp(argv[1], "Q") == 0)
+ sprintf(argBuf, "%s %s", argv[0], "noprint");
+ else
+ {
+ if (strcmp(argv[1], "s") == 0)
+ {
+ if (!signal_stop[oursig])
+ sprintf(argBuf, "%s %s", argv[0], "stop");
+ else
+ sprintf(argBuf, "%s %s", argv[0], "nostop");
+ }
+ else if (strcmp(argv[1], "i") == 0)
+ {
+ if (!signal_program[oursig])
+ sprintf(argBuf, "%s %s", argv[0], "pass");
+ else
+ sprintf(argBuf, "%s %s", argv[0], "nopass");
+ }
+ else if (strcmp(argv[1], "r") == 0)
+ {
+ if (!signal_print[oursig])
+ sprintf(argBuf, "%s %s", argv[0], "print");
+ else
+ sprintf(argBuf, "%s %s", argv[0], "noprint");
+ }
+ else
+ validFlag = 0;
+ }
+ if (validFlag)
+ handle_command(argBuf, from_tty);
+ else
+ printf_filtered("Invalid signal handling flag.\n");
+ if (argBuf)
+ free(argBuf);
+ }
+ }
+ do_cleanups (old_chain);
}
-/* Print current contents of the tables set by the handle command. */
+/* Print current contents of the tables set by the handle command.
+ It is possible we should just be printing signals actually used
+ by the current target (but for things to work right when switching
+ targets, all signals should be in the signal tables). */
static void
-signals_info (signum_exp)
+signals_info (signum_exp, from_tty)
char *signum_exp;
+ int from_tty;
{
- register int i;
+ enum target_signal oursig;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
- i = sig_number (signum_exp);
- if (i == -1)
+ oursig = target_signal_from_name (signum_exp);
+ if (oursig == TARGET_SIGNAL_UNKNOWN)
{
- /* Nope, maybe it's an address which evaluates to a signal
- number. */
- i = parse_and_eval_address (signum_exp);
- if (i >= NSIG || i < 0)
- error ("Signal number out of bounds.");
+ /* No, try numeric. */
+ oursig =
+ target_signal_from_command (parse_and_eval_address (signum_exp));
}
- sig_print_info (i);
+ sig_print_info (oursig);
return;
}
printf_filtered ("\n");
- for (i = 0; i < NSIG; i++)
+ /* These ugly casts brought to you by the native VAX compiler. */
+ for (oursig = TARGET_SIGNAL_FIRST;
+ (int)oursig < (int)TARGET_SIGNAL_LAST;
+ oursig = (enum target_signal)((int)oursig + 1))
{
QUIT;
- sig_print_info (i);
+ if (oursig != TARGET_SIGNAL_UNKNOWN
+ && oursig != TARGET_SIGNAL_DEFAULT
+ && oursig != TARGET_SIGNAL_0)
+ sig_print_info (oursig);
}
printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
struct inferior_status *inf_status;
int restore_stack_info;
{
- inf_status->pc_changed = pc_changed;
inf_status->stop_signal = stop_signal;
inf_status->stop_pc = stop_pc;
- inf_status->stop_frame_address = stop_frame_address;
inf_status->stop_step = stop_step;
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
inf_status->step_range_end = step_range_end;
inf_status->step_frame_address = step_frame_address;
inf_status->step_over_calls = step_over_calls;
- inf_status->step_resume_break_address = step_resume_break_address;
inf_status->stop_after_trap = stop_after_trap;
inf_status->stop_soon_quietly = stop_soon_quietly;
/* Save original bpstat chain here; replace it with copy of chain.
inf_status->restore_stack_info = restore_stack_info;
inf_status->proceed_to_finish = proceed_to_finish;
- bcopy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
-
+ memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+
+ read_register_bytes (0, inf_status->registers, REGISTER_BYTES);
+
record_selected_frame (&(inf_status->selected_frame_address),
&(inf_status->selected_level));
return;
}
+struct restore_selected_frame_args {
+ CORE_ADDR frame_address;
+ int level;
+};
+
+static int restore_selected_frame PARAMS ((char *));
+
+/* Restore the selected frame. args is really a struct
+ restore_selected_frame_args * (declared as char * for catch_errors)
+ telling us what frame to restore. Returns 1 for success, or 0 for
+ failure. An error message will have been printed on error. */
+
+static int
+restore_selected_frame (args)
+ char *args;
+{
+ struct restore_selected_frame_args *fr =
+ (struct restore_selected_frame_args *) args;
+ struct frame_info *frame;
+ int level = fr->level;
+
+ frame = find_relative_frame (get_current_frame (), &level);
+
+ /* If inf_status->selected_frame_address is NULL, there was no
+ previously selected frame. */
+ if (frame == NULL ||
+ /* FRAME_FP (frame) != fr->frame_address || */
+ /* elz: deleted this check as a quick fix to the problem that
+ for function called by hand gdb creates no internal frame
+ structure and the real stack and gdb's idea of stack are
+ different if nested calls by hands are made.
+
+ mvs: this worries me. */
+ level != 0)
+ {
+ warning ("Unable to restore previously selected frame.\n");
+ return 0;
+ }
+
+ select_frame (frame, fr->level);
+
+ return(1);
+}
+
void
restore_inferior_status (inf_status)
struct inferior_status *inf_status;
{
- FRAME fid;
- int level = inf_status->selected_level;
-
- pc_changed = inf_status->pc_changed;
stop_signal = inf_status->stop_signal;
stop_pc = inf_status->stop_pc;
- stop_frame_address = inf_status->stop_frame_address;
stop_step = inf_status->stop_step;
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
step_range_end = inf_status->step_range_end;
step_frame_address = inf_status->step_frame_address;
step_over_calls = inf_status->step_over_calls;
- step_resume_break_address = inf_status->step_resume_break_address;
stop_after_trap = inf_status->stop_after_trap;
stop_soon_quietly = inf_status->stop_soon_quietly;
bpstat_clear (&stop_bpstat);
breakpoint_proceeded = inf_status->breakpoint_proceeded;
proceed_to_finish = inf_status->proceed_to_finish;
- bcopy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+ memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
+
+ /* The inferior can be gone if the user types "print exit(0)"
+ (and perhaps other times). */
+ if (target_has_execution)
+ write_register_bytes (0, inf_status->registers, REGISTER_BYTES);
/* The inferior can be gone if the user types "print exit(0)"
(and perhaps other times). */
+
+ /* FIXME: If we are being called after stopping in a function which
+ is called from gdb, we should not be trying to restore the
+ selected frame; it just prints a spurious error message (The
+ message is useful, however, in detecting bugs in gdb (like if gdb
+ clobbers the stack)). In fact, should we be restoring the
+ inferior status at all in that case? . */
+
if (target_has_stack && inf_status->restore_stack_info)
{
- fid = find_relative_frame (get_current_frame (),
- &level);
-
- /* If inf_status->selected_frame_address is NULL, there was no
- previously selected frame. */
- if (fid == 0 ||
- FRAME_FP (fid) != inf_status->selected_frame_address ||
- level != 0)
- {
-#if 0
- /* I'm not sure this error message is a good idea. I have
- only seen it occur after "Can't continue previously
- requested operation" (we get called from do_cleanups), in
- which case it just adds insult to injury (one confusing
- error message after another. Besides which, does the
- user really care if we can't restore the previously
- selected frame? */
- fprintf (stderr, "Unable to restore previously selected frame.\n");
-#endif
- select_frame (get_current_frame (), 0);
- return;
- }
-
- select_frame (fid, inf_status->selected_level);
+ struct restore_selected_frame_args fr;
+ fr.level = inf_status->selected_level;
+ fr.frame_address = inf_status->selected_frame_address;
+ /* The point of catch_errors is that if the stack is clobbered,
+ walking the stack might encounter a garbage pointer and error()
+ trying to dereference it. */
+ if (catch_errors (restore_selected_frame, &fr,
+ "Unable to restore previously selected frame:\n",
+ RETURN_MASK_ERROR) == 0)
+ /* Error in restoring the selected frame. Select the innermost
+ frame. */
+
+
+ select_frame (get_current_frame (), 0);
+
}
}
+
+\f
+void
+set_follow_fork_mode_command (arg, from_tty, c)
+ char * arg;
+ int from_tty;
+ struct cmd_list_element * c;
+{
+ if (! STREQ (arg, "parent") &&
+ ! STREQ (arg, "child") &&
+ ! STREQ (arg, "both") &&
+ ! STREQ (arg, "ask"))
+ error ("follow-fork-mode must be one of \"parent\", \"child\", \"both\" or \"ask\".");
+
+ if (follow_fork_mode_string != NULL)
+ free (follow_fork_mode_string);
+ follow_fork_mode_string = savestring (arg, strlen (arg));
+}
+
+
\f
void
_initialize_infrun ()
{
register int i;
+ register int numsigs;
+ struct cmd_list_element * c;
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
-Specify a signal number as argument to print info on that signal only.");
+Specify a signal as argument to print info on that signal only.");
+ add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command,
- "Specify how to handle a signal.\n\
-Args are signal number followed by flags.\n\
-Flags allowed are \"stop\", \"print\", \"pass\",\n\
- \"nostop\", \"noprint\" or \"nopass\".\n\
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
+Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
+Pass means let program see this signal; otherwise program doesn't know.\n\
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+ if (xdb_commands)
+ {
+ add_com("lz", class_info, signals_info,
+ "What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only.");
+ add_com("z", class_run, xdb_handle_command,
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"s\" (toggles between stop and nostop), \n\
+\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
+nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
-Pass and Stop may be combined.");
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+ }
- for (i = 0; i < NSIG; i++)
+ if (!dbx_commands)
+ stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
+ "There is no `stop' command, but you can set a hook on `stop'.\n\
+This allows you to set a list of commands to be run each time execution\n\
+of the program stops.", &cmdlist);
+
+ numsigs = (int)TARGET_SIGNAL_LAST;
+ signal_stop = (unsigned char *)
+ xmalloc (sizeof (signal_stop[0]) * numsigs);
+ signal_print = (unsigned char *)
+ xmalloc (sizeof (signal_print[0]) * numsigs);
+ signal_program = (unsigned char *)
+ xmalloc (sizeof (signal_program[0]) * numsigs);
+ for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
signal_print[i] = 1;
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
- signal_program[SIGTRAP] = 0;
- signal_program[SIGINT] = 0;
+ signal_program[TARGET_SIGNAL_TRAP] = 0;
+ signal_program[TARGET_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
-#ifdef SIGALRM
- signal_stop[SIGALRM] = 0;
- signal_print[SIGALRM] = 0;
-#endif /* SIGALRM */
-#ifdef SIGVTALRM
- signal_stop[SIGVTALRM] = 0;
- signal_print[SIGVTALRM] = 0;
-#endif /* SIGVTALRM */
-#ifdef SIGPROF
- signal_stop[SIGPROF] = 0;
- signal_print[SIGPROF] = 0;
-#endif /* SIGPROF */
-#ifdef SIGCHLD
- signal_stop[SIGCHLD] = 0;
- signal_print[SIGCHLD] = 0;
-#endif /* SIGCHLD */
-#ifdef SIGCLD
- signal_stop[SIGCLD] = 0;
- signal_print[SIGCLD] = 0;
-#endif /* SIGCLD */
-#ifdef SIGIO
- signal_stop[SIGIO] = 0;
- signal_print[SIGIO] = 0;
-#endif /* SIGIO */
-#ifdef SIGURG
- signal_stop[SIGURG] = 0;
- signal_print[SIGURG] = 0;
-#endif /* SIGURG */
-}
+ signal_stop[TARGET_SIGNAL_ALRM] = 0;
+ signal_print[TARGET_SIGNAL_ALRM] = 0;
+ signal_stop[TARGET_SIGNAL_VTALRM] = 0;
+ signal_print[TARGET_SIGNAL_VTALRM] = 0;
+ signal_stop[TARGET_SIGNAL_PROF] = 0;
+ signal_print[TARGET_SIGNAL_PROF] = 0;
+ signal_stop[TARGET_SIGNAL_CHLD] = 0;
+ signal_print[TARGET_SIGNAL_CHLD] = 0;
+ signal_stop[TARGET_SIGNAL_IO] = 0;
+ signal_print[TARGET_SIGNAL_IO] = 0;
+ signal_stop[TARGET_SIGNAL_POLL] = 0;
+ signal_print[TARGET_SIGNAL_POLL] = 0;
+ signal_stop[TARGET_SIGNAL_URG] = 0;
+ signal_print[TARGET_SIGNAL_URG] = 0;
+
+#ifdef SOLIB_ADD
+ add_show_from_set
+ (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
+ (char *) &stop_on_solib_events,
+ "Set stopping for shared library events.\n\
+If nonzero, gdb will give control to the user when the dynamic linker\n\
+notifies gdb of shared library events. The most common event of interest\n\
+to the user would be loading/unloading of a new library.\n",
+ &setlist),
+ &showlist);
+#endif
+ c = add_set_enum_cmd ("follow-fork-mode",
+ class_run,
+ follow_fork_mode_kind_names,
+ (char *) &follow_fork_mode_string,
+/* ??rehrauer: The "both" option is broken, by what may be a 10.20
+ kernel problem. It's also not terribly useful without a GUI to
+ help the user drive two debuggers. So for now, I'm disabling
+ the "both" option. */
+/* "Set debugger response to a program call of fork \
+or vfork.\n\
+A fork or vfork creates a new process. follow-fork-mode can be:\n\
+ parent - the original process is debugged after a fork\n\
+ child - the new process is debugged after a fork\n\
+ both - both the parent and child are debugged after a fork\n\
+ ask - the debugger will ask for one of the above choices\n\
+For \"both\", another copy of the debugger will be started to follow\n\
+the new child process. The original debugger will continue to follow\n\
+the original parent process. To distinguish their prompts, the\n\
+debugger copy's prompt will be changed.\n\
+For \"parent\" or \"child\", the unfollowed process will run free.\n\
+By default, the debugger will follow the parent process.",
+*/
+ "Set debugger response to a program call of fork \
+or vfork.\n\
+A fork or vfork creates a new process. follow-fork-mode can be:\n\
+ parent - the original process is debugged after a fork\n\
+ child - the new process is debugged after a fork\n\
+ ask - the debugger will ask for one of the above choices\n\
+For \"parent\" or \"child\", the unfollowed process will run free.\n\
+By default, the debugger will follow the parent process.",
+ &setlist);
+/* c->function.sfunc = ;*/
+ add_show_from_set (c, &showlist);
+
+ set_follow_fork_mode_command ("parent", 0, NULL);
+
+ c = add_set_enum_cmd ("scheduler-locking", class_run,
+ scheduler_enums, /* array of string names */
+ (char *) &scheduler_mode, /* current mode */
+ "Set mode for locking scheduler during execution.\n\
+off == no locking (threads may preempt at any time)\n\
+on == full locking (no thread except the current thread may run)\n\
+step == scheduler locked during every single-step operation.\n\
+ In this mode, no other thread may run during a step command.\n\
+ Other threads may run while stepping over a function call ('next').",
+ &setlist);
+
+ c->function.sfunc = set_schedlock_func; /* traps on target vector */
+ add_show_from_set (c, &showlist);
+}