-/* Start (run) and stop the inferior process, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+/* Target-struct-independent code to start (run) and stop an inferior process.
+ Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993
+ Free Software Foundation, Inc.
This file is part of GDB.
don't worry about this; it will make calls look like simple
jumps (and the stack frames will be printed when the frame
pointer moves), which is a reasonably non-violent response.
-
-#if 0
- We skip this; it causes more problems than it's worth.
-#ifdef SUN4_COMPILER_FEATURE
- We do a special ifdef for the sun 4, forcing it to single step
- into calls which don't have prologues. This means that we can't
- nexti over leaf nodes, we can probably next over them (since they
- won't have debugging symbols, usually), and we can next out of
- functions returning structures (with a "call .stret4" at the end).
-#endif
-#endif
*/
-
-
-
-
-#include <stdio.h>
-#include <string.h>
#include "defs.h"
+#include <string.h>
+#include <ctype.h>
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
#include "breakpoint.h"
#include "wait.h"
#include "gdbcore.h"
-#include "signame.h"
-#include "command.h"
-#include "terminal.h" /* For #ifdef TIOCGPGRP and new_tty */
+#include "gdbcmd.h"
#include "target.h"
#include <signal.h>
#include <sys/file.h>
#endif
-#ifdef SET_STACK_LIMIT_HUGE
-#include <sys/time.h>
-#include <sys/resource.h>
-
-extern int original_stack_limit;
-#endif /* SET_STACK_LIMIT_HUGE */
-
/* Prototypes for local functions */
static void
-signals_info PARAMS ((char *));
+signals_info PARAMS ((char *, int));
static void
handle_command PARAMS ((char *, int));
static void
insert_step_breakpoint PARAMS ((void));
-static void
-resume PARAMS ((int, int));
-
static void
resume_cleanups PARAMS ((int));
-extern char **environ;
-
-extern struct target_ops child_ops; /* In inftarg.c */
-
-/* Sigtramp is a routine that the kernel calls (which then calls the
- signal handler). On most machines it is a library routine that
- is linked into the executable.
-
- This macro, given a program counter value and the name of the
- function in which that PC resides (which can be null if the
- name is not known), returns nonzero if the PC and name show
- that we are in sigtramp.
-
- On most machines just see if the name is sigtramp (and if we have
- no name, assume we are not in sigtramp). */
-#if !defined (IN_SIGTRAMP)
-#define IN_SIGTRAMP(pc, name) \
- (name && !strcmp ("_sigtramp", name))
-#endif
+static int
+hook_stop_stub PARAMS ((char *));
/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
program. It needs to examine the jmp_buf argument and extract the PC
#define GET_LONGJMP_TARGET(PC_ADDR) 0
#endif
+
+/* Some machines have trampoline code that sits between function callers
+ and the actual functions themselves. If this machine doesn't have
+ such things, disable their processing. */
+#ifndef SKIP_TRAMPOLINE_CODE
+#define SKIP_TRAMPOLINE_CODE(pc) 0
+#endif
+
+/* For SVR4 shared libraries, each call goes through a small piece of
+ trampoline code in the ".init" section. IN_SOLIB_TRAMPOLINE evaluates
+ to nonzero if we are current stopped in one of these. */
+#ifndef IN_SOLIB_TRAMPOLINE
+#define IN_SOLIB_TRAMPOLINE(pc,name) 0
+#endif
+
+/* On some systems, the PC may be left pointing at an instruction that won't
+ actually be executed. This is usually indicated by a bit in the PSW. If
+ we find ourselves in such a state, then we step the target beyond the
+ nullified instruction before returning control to the user so as to avoid
+ confusion. */
+
+#ifndef INSTRUCTION_NULLIFIED
+#define INSTRUCTION_NULLIFIED 0
+#endif
+
+#ifdef TDESC
+#include "tdesc.h"
+int safe_to_init_tdesc_context = 0;
+extern dc_dcontext_t current_context;
+#endif
+
/* Tables of how to react to signals; the user sets them. */
-static char signal_stop[NSIG];
-static char signal_print[NSIG];
-static char signal_program[NSIG];
+static unsigned char *signal_stop;
+static unsigned char *signal_print;
+static unsigned char *signal_program;
+
+#define SET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 1; \
+ } while (0)
+
+#define UNSET_SIGS(nsigs,sigs,flags) \
+ do { \
+ int signum = (nsigs); \
+ while (signum-- > 0) \
+ if ((sigs)[signum]) \
+ (flags)[signum] = 0; \
+ } while (0)
+
+
+/* Command list pointer for the "stop" placeholder. */
+
+static struct cmd_list_element *stop_command;
/* Nonzero if breakpoints are now inserted in the inferior. */
-/* Nonstatic for initialization during xxx_create_inferior. FIXME. */
-/*static*/ int breakpoints_inserted;
+static int breakpoints_inserted;
/* Function inferior was in as of last step command. */
STEP nonzero if we should step (zero to continue instead).
SIG is the signal to give the inferior (zero for none). */
-static void
+void
resume (step, sig)
int step;
int sig;
oneproc = 1;
}
else
- {
- write_register (PC_REGNUM, addr);
-#ifdef NPC_REGNUM
- write_register (NPC_REGNUM, addr + 4);
-#ifdef NNPC_REGNUM
- write_register (NNPC_REGNUM, addr + 8);
-#endif
-#endif
- }
+ write_pc (addr);
if (trap_expected_after_continue)
{
normal_stop ();
}
-#if 0
-/* This might be useful (not sure), but isn't currently used. See also
- write_pc(). */
-/* Writing the inferior pc as a register calls this function
- to inform infrun that the pc has been set in the debugger. */
-
-void
-writing_pc (val)
- CORE_ADDR val;
-{
- stop_pc = val;
- pc_changed = 1;
-}
-#endif
-
/* Record the pc and sp of the program the last time it stopped.
These are just used internally by wait_for_inferior, but need
to be preserved over calls to it and cleared when the inferior
static char *prev_func_name;
\f
-/* Start an inferior Unix child process and sets inferior_pid to its pid.
- EXEC_FILE is the file to run.
- ALLARGS is a string containing the arguments to the program.
- ENV is the environment vector to pass. Errors reported with error(). */
-
-#ifndef SHELL_FILE
-#define SHELL_FILE "/bin/sh"
-#endif
-
-void
-child_create_inferior (exec_file, allargs, env)
- char *exec_file;
- char *allargs;
- char **env;
-{
- int pid;
- char *shell_command;
- extern int sys_nerr;
- extern char *sys_errlist[];
- char *shell_file;
- static char default_shell_file[] = SHELL_FILE;
- int len;
- int pending_execs;
- /* Set debug_fork then attach to the child while it sleeps, to debug. */
- static int debug_fork = 0;
- /* This is set to the result of setpgrp, which if vforked, will be visible
- to you in the parent process. It's only used by humans for debugging. */
- static int debug_setpgrp = 657473;
- char **save_our_env;
-
- /* The user might want tilde-expansion, and in general probably wants
- the program to behave the same way as if run from
- his/her favorite shell. So we let the shell run it for us.
- FIXME, this should probably search the local environment (as
- modified by the setenv command), not the env gdb inherited. */
- shell_file = getenv ("SHELL");
- if (shell_file == NULL)
- shell_file = default_shell_file;
-
- len = 5 + strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop*/ 10;
- /* If desired, concat something onto the front of ALLARGS.
- SHELL_COMMAND is the result. */
-#ifdef SHELL_COMMAND_CONCAT
- shell_command = (char *) alloca (strlen (SHELL_COMMAND_CONCAT) + len);
- strcpy (shell_command, SHELL_COMMAND_CONCAT);
-#else
- shell_command = (char *) alloca (len);
- shell_command[0] = '\0';
-#endif
- strcat (shell_command, "exec ");
- strcat (shell_command, exec_file);
- strcat (shell_command, " ");
- strcat (shell_command, allargs);
-
- /* exec is said to fail if the executable is open. */
- close_exec_file ();
-
- /* Retain a copy of our environment variables, since the child will
- replace the value of environ and if we're vforked, we have to
- restore it. */
- save_our_env = environ;
-
- /* Tell the terminal handling subsystem what tty we plan to run on;
- it will just record the information for later. */
-
- new_tty_prefork (inferior_io_terminal);
-
- /* It is generally good practice to flush any possible pending stdio
- output prior to doing a fork, to avoid the possibility of both the
- parent and child flushing the same data after the fork. */
-
- fflush (stdout);
- fflush (stderr);
-
-#if defined(USG) && !defined(HAVE_VFORK)
- pid = fork ();
-#else
- if (debug_fork)
- pid = fork ();
- else
- pid = vfork ();
-#endif
-
- if (pid < 0)
- perror_with_name ("vfork");
-
- if (pid == 0)
- {
- if (debug_fork)
- sleep (debug_fork);
-
-#ifdef TIOCGPGRP
- /* Run inferior in a separate process group. */
-#ifdef NEED_POSIX_SETPGID
- debug_setpgrp = setpgid (0, 0);
-#else
-#if defined(USG) && !defined(SETPGRP_ARGS)
- debug_setpgrp = setpgrp ();
-#else
- debug_setpgrp = setpgrp (getpid (), getpid ());
-#endif /* USG */
-#endif /* NEED_POSIX_SETPGID */
- if (debug_setpgrp == -1)
- perror("setpgrp failed in child");
-#endif /* TIOCGPGRP */
-
-#ifdef SET_STACK_LIMIT_HUGE
- /* Reset the stack limit back to what it was. */
- {
- struct rlimit rlim;
-
- getrlimit (RLIMIT_STACK, &rlim);
- rlim.rlim_cur = original_stack_limit;
- setrlimit (RLIMIT_STACK, &rlim);
- }
-#endif /* SET_STACK_LIMIT_HUGE */
-
- /* Ask the tty subsystem to switch to the one we specified earlier
- (or to share the current terminal, if none was specified). */
-
- new_tty ();
-
- /* Changing the signal handlers for the inferior after
- a vfork can also change them for the superior, so we don't mess
- with signals here. See comments in
- initialize_signals for how we get the right signal handlers
- for the inferior. */
-
-#ifdef USE_PROC_FS
- proc_set_exec_trap (); /* Use SVR4 /proc interface */
-#else
- call_ptrace (0, 0, 0, 0); /* "Trace me, Dr. Memory!" */
-#endif
-
- /* There is no execlpe call, so we have to set the environment
- for our child in the global variable. If we've vforked, this
- clobbers the parent, but environ is restored a few lines down
- in the parent. By the way, yes we do need to look down the
- path to find $SHELL. Rich Pixley says so, and I agree. */
- environ = env;
- execlp (shell_file, shell_file, "-c", shell_command, (char *)0);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", shell_file,
- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
- fflush (stderr);
- _exit (0177);
- }
-
- /* Restore our environment in case a vforked child clob'd it. */
- environ = save_our_env;
-
- /* Now that we have a child process, make it our target. */
- push_target (&child_ops);
-
-#ifdef CREATE_INFERIOR_HOOK
- CREATE_INFERIOR_HOOK (pid);
-#endif
-
-/* The process was started by the fork that created it,
- but it will have stopped one instruction after execing the shell.
- Here we must get it up to actual execution of the real program. */
-
- inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
-
- clear_proceed_status ();
-
- /* We will get a trace trap after one instruction.
- Continue it automatically. Eventually (after shell does an exec)
- it will get another trace trap. Then insert breakpoints and continue. */
-
-#ifdef START_INFERIOR_TRAPS_EXPECTED
- pending_execs = START_INFERIOR_TRAPS_EXPECTED;
-#else
- pending_execs = 2;
-#endif
-
- init_wait_for_inferior ();
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- while (1)
- {
- stop_soon_quietly = 1; /* Make wait_for_inferior be quiet */
- wait_for_inferior ();
- if (stop_signal != SIGTRAP)
- {
- /* Let shell child handle its own signals in its own way */
- /* FIXME, what if child has exit()ed? Must exit loop somehow */
- resume (0, stop_signal);
- }
- else
- {
- /* We handle SIGTRAP, however; it means child did an exec. */
- if (0 == --pending_execs)
- break;
- resume (0, 0); /* Just make it go on */
- }
- }
- stop_soon_quietly = 0;
-
- /* We are now in the child process of interest, having exec'd the
- correct program, and are poised at the first instruction of the
- new program. */
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- SOLIB_CREATE_INFERIOR_HOOK ();
-#endif
-
- /* Should this perhaps just be a "proceed" call? FIXME */
- insert_step_breakpoint ();
- breakpoints_failed = insert_breakpoints ();
- if (!breakpoints_failed)
- {
- breakpoints_inserted = 1;
- target_terminal_inferior();
- /* Start the child program going on its first instruction, single-
- stepping if we need to. */
- resume (bpstat_should_step (), 0);
- wait_for_inferior ();
- normal_stop ();
- }
-}
-
/* Start remote-debugging of a machine over a serial link. */
void
}
-/* Attach to process PID, then initialize for debugging it
- and wait for the trace-trap that results from attaching. */
-
-void
-child_attach (args, from_tty)
- char *args;
- int from_tty;
-{
- char *exec_file;
- int pid;
-
- dont_repeat();
-
- if (!args)
- error_no_arg ("process-id to attach");
-
-#ifndef ATTACH_DETACH
- error ("Can't attach to a process on this machine.");
-#else
- pid = atoi (args);
-
- if (target_has_execution)
- {
- if (query ("A program is being debugged already. Kill it? "))
- target_kill ();
- else
- error ("Inferior not killed.");
- }
-
- exec_file = (char *) get_exec_file (1);
-
- if (from_tty)
- {
- printf ("Attaching program: %s pid %d\n",
- exec_file, pid);
- fflush (stdout);
- }
-
- attach (pid);
- inferior_pid = pid;
- push_target (&child_ops);
-
- mark_breakpoints_out ();
- target_terminal_init ();
- clear_proceed_status ();
- stop_soon_quietly = 1;
- /*proceed (-1, 0, -2);*/
- target_terminal_inferior ();
- wait_for_inferior ();
-#ifdef SOLIB_ADD
- SOLIB_ADD ((char *)0, from_tty, (struct target_ops *)0);
-#endif
- normal_stop ();
-#endif /* ATTACH_DETACH */
-}
\f
/* Wait for control to return from inferior to debugger.
If inferior gets a signal, we may decide to start it up again
CORE_ADDR stop_sp;
CORE_ADDR stop_func_start;
char *stop_func_name;
- CORE_ADDR prologue_pc;
+ CORE_ADDR prologue_pc, tmp;
int stop_step_resume_break;
struct symtab_and_line sal;
int remove_breakpoints_on_following_step = 0;
int current_line;
int handling_longjmp = 0; /* FIXME */
+ struct symtab *symtab;
sal = find_pc_line(prev_pc, 0);
current_line = sal.line;
target_wait (&w);
+#ifdef SIGTRAP_STOP_AFTER_LOAD
+
+ /* Somebody called load(2), and it gave us a "trap signal after load".
+ Ignore it gracefully. */
+
+ SIGTRAP_STOP_AFTER_LOAD (w);
+#endif
+
/* See if the process still exists; clean up if it doesn't. */
if (WIFEXITED (w))
{
target_terminal_ours (); /* Must do this before mourn anyway */
if (WEXITSTATUS (w))
- printf ("\nProgram exited with code 0%o.\n",
+ printf_filtered ("\nProgram exited with code 0%o.\n",
(unsigned int)WEXITSTATUS (w));
else
if (!batch_mode())
- printf ("\nProgram exited normally.\n");
+ printf_filtered ("\nProgram exited normally.\n");
fflush (stdout);
target_mourn_inferior ();
#ifdef NO_SINGLE_STEP
target_terminal_ours (); /* Must do this before mourn anyway */
target_kill (); /* kill mourns as well */
#ifdef PRINT_RANDOM_SIGNAL
- printf ("\nProgram terminated: ");
+ printf_filtered ("\nProgram terminated: ");
PRINT_RANDOM_SIGNAL (stop_signal);
#else
- printf ("\nProgram terminated with signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
+ printf_filtered ("\nProgram terminated with signal %d, %s\n",
+ stop_signal, safe_strsignal (stop_signal));
#endif
- printf ("The inferior process no longer exists.\n");
+ printf_filtered ("The inferior process no longer exists.\n");
fflush (stdout);
#ifdef NO_SINGLE_STEP
one_stepped = 0;
single_step (0); /* This actually cleans up the ss */
#endif /* NO_SINGLE_STEP */
+/* If PC is pointing at a nullified instruction, then step beyond it so that
+ the user won't be confused when GDB appears to be ready to execute it. */
+
+ if (INSTRUCTION_NULLIFIED)
+ {
+ resume (1, 0);
+ continue;
+ }
+
stop_pc = read_pc ();
set_current_frame ( create_new_frame (read_register (FP_REGNUM),
read_pc ()));
stop_frame_address = FRAME_FP (get_current_frame ());
stop_sp = read_register (SP_REGNUM);
+/* XXX - FIXME. Need to figure out a better way to grab the stack seg reg. */
+#ifdef GDB_TARGET_IS_H8500
+ stop_sp |= read_register (SEG_T_REGNUM) << 16;
+#endif
stop_func_start = 0;
stop_func_name = 0;
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
- (void) find_pc_partial_function (stop_pc, &stop_func_name,
- &stop_func_start);
+ find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start);
stop_func_start += FUNCTION_START_OFFSET;
another_trap = 0;
bpstat_clear (&stop_bpstat);
if (stop_signal == SIGTRAP
|| (breakpoints_inserted &&
(stop_signal == SIGILL
- || stop_signal == SIGEMT))
+#ifdef SIGEMT
+ || stop_signal == SIGEMT
+#endif
+ ))
|| stop_soon_quietly)
{
if (stop_signal == SIGTRAP && stop_after_trap)
if (DECR_PC_AFTER_BREAK)
{
stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
- pc_changed = 0;
+ write_pc (stop_pc);
}
}
else
/* End of a stack dummy. Some systems (e.g. Sony
news) give another signal besides SIGTRAP,
so check here as well as above. */
- || (stop_sp INNER_THAN stop_pc
- && stop_pc INNER_THAN stop_frame_address)
+ || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
);
if (!random_signal)
stop_signal = SIGTRAP;
#ifdef PRINT_RANDOM_SIGNAL
PRINT_RANDOM_SIGNAL (stop_signal);
#else
- printf ("\nProgram received signal %d, %s\n",
- stop_signal,
- stop_signal < NSIG
- ? sys_siglist[stop_signal]
- : "(undocumented)");
+ printf_filtered ("\nProgram received signal %d, %s\n",
+ stop_signal, safe_strsignal (stop_signal));
#endif /* PRINT_RANDOM_SIGNAL */
fflush (stdout);
}
else if (printed)
target_terminal_inferior ();
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = 0;
+
/* Note that virtually all the code below does `if !random_signal'.
Perhaps this code should end with a goto or continue. At least
one (now fixed) bug was caused by this -- a !random_signal was
/* Handle cases caused by hitting a breakpoint. */
if (!random_signal)
- if (bpstat_explains_signal (stop_bpstat))
- {
- CORE_ADDR jmp_buf_pc;
+ {
+ CORE_ADDR jmp_buf_pc;
+ enum bpstat_what what = bpstat_what (stop_bpstat);
- switch (stop_bpstat->breakpoint_at->type) /* FIXME */
- {
- /* If we hit the breakpoint at longjmp, disable it for the
- duration of this command. Then, install a temporary
- breakpoint at the target of the jmp_buf. */
- case bp_longjmp:
- disable_longjmp_breakpoint();
- remove_breakpoints ();
- breakpoints_inserted = 0;
- if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
+ switch (what)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp, disable it for the
+ duration of this command. Then, install a temporary
+ breakpoint at the target of the jmp_buf. */
+ disable_longjmp_breakpoint();
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
- /* Need to blow away step-resume breakpoint, as it
- interferes with us */
- remove_step_breakpoint ();
- step_resume_break_address = 0;
- stop_step_resume_break = 0;
+ /* Need to blow away step-resume breakpoint, as it
+ interferes with us */
+ remove_step_breakpoint ();
+ step_resume_break_address = 0;
+ stop_step_resume_break = 0;
-#if 0 /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls > 0)
- set_longjmp_resume_breakpoint(jmp_buf_pc,
- get_current_frame());
- else
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls > 0)
+ set_longjmp_resume_breakpoint(jmp_buf_pc,
+ get_current_frame());
+ else
#endif /* 0 */
- set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
- handling_longjmp = 1; /* FIXME */
- goto keep_going;
+ set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
+ handling_longjmp = 1; /* FIXME */
+ goto keep_going;
- case bp_longjmp_resume:
- remove_breakpoints ();
- breakpoints_inserted = 0;
-#if 0 /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls
- && (stop_frame_address
- INNER_THAN step_frame_address))
- {
- another_trap = 1;
- goto keep_going;
- }
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+#if 0
+ /* FIXME - Need to implement nested temporary breakpoints */
+ if (step_over_calls
+ && (stop_frame_address
+ INNER_THAN step_frame_address))
+ {
+ another_trap = 1;
+ goto keep_going;
+ }
#endif /* 0 */
- disable_longjmp_breakpoint();
- handling_longjmp = 0; /* FIXME */
+ disable_longjmp_breakpoint();
+ handling_longjmp = 0; /* FIXME */
+ if (what == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
break;
+ /* else fallthrough */
- default:
- fprintf(stderr, "Unknown breakpoint type %d\n",
- stop_bpstat->breakpoint_at->type);
- case bp_watchpoint:
- case bp_breakpoint:
- case bp_until:
- case bp_finish:
- /* Does a breakpoint want us to stop? */
- if (bpstat_stop (stop_bpstat))
- {
- stop_print_frame = bpstat_should_print (stop_bpstat);
- goto stop_stepping;
- }
- /* Otherwise, must remove breakpoints and single-step
- to get us past the one we hit. */
- else
- {
- remove_breakpoints ();
- remove_step_breakpoint ();
- breakpoints_inserted = 0;
- another_trap = 1;
- }
- break;
- }
- }
- else if (stop_step_resume_break)
+ case BPSTAT_WHAT_SINGLE:
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+ remove_step_breakpoint ();
+ breakpoints_inserted = 0;
+ another_trap = 1;
+ /* Still need to check other stuff, at least the case
+ where we are stepping and step out of the right range. */
+ break;
+
+ case BPSTAT_WHAT_STOP_NOISY:
+ stop_print_frame = 1;
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STOP_SILENT:
+ stop_print_frame = 0;
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
+ }
+
+ if (stop_step_resume_break)
{
/* But if we have hit the step-resumption breakpoint,
remove it. It has done its job getting us here.
#if 0
if (* step_frame_address == 0
|| (step_frame_address == stop_frame_address))
-#endif 0
+#endif
{
remove_step_breakpoint ();
step_resume_break_address = 0;
another_trap = 1;
}
}
+ }
/* We come here if we hit a breakpoint but should not
stop for it. Possibly we also were stepping
&& (stop_sp INNER_THAN prev_sp
|| stop_frame_address != step_frame_address)))
{
-#if 0
- /* When "next"ing through a function,
- This causes an extra stop at the end.
- Is there any reason for this?
- It's confusing to the user. */
- /* Don't step through the return from a function
- unless that is the first instruction stepped through. */
- if (ABOUT_TO_RETURN (stop_pc))
- {
- stop_step = 1;
- break;
- }
-#endif
+ ;
}
/* We stepped out of the stepping range. See if that was due
to a subroutine call that we should proceed to the end of. */
else if (!random_signal && step_range_end)
{
- if (stop_func_start)
- {
- prologue_pc = stop_func_start;
- SKIP_PROLOGUE (prologue_pc);
- }
-
/* Did we just take a signal? */
if (IN_SIGTRAMP (stop_pc, stop_func_name)
&& !IN_SIGTRAMP (prev_pc, prev_func_name))
if (step_range_end == 1)
step_range_end = (step_range_start = prev_pc) + 1;
remove_breakpoints_on_following_step = 1;
+ goto save_pc;
+ }
+
+ if (stop_func_start)
+ {
+ /* Do this after the IN_SIGTRAMP check; it might give
+ an error. */
+ prologue_pc = stop_func_start;
+ SKIP_PROLOGUE (prologue_pc);
}
/* ==> See comments at top of file on this algorithm. <==*/
- else if (stop_pc == stop_func_start
- && (stop_func_start != prev_func_start
- || prologue_pc != stop_func_start
- || stop_sp != prev_sp))
+ if ((stop_pc == stop_func_start
+ || IN_SOLIB_TRAMPOLINE (stop_pc, stop_func_name))
+ && (stop_func_start != prev_func_start
+ || prologue_pc != stop_func_start
+ || stop_sp != prev_sp))
{
- /* It's a subroutine call */
- if (step_over_calls > 0
- || (step_over_calls && find_pc_function (stop_pc) == 0))
+ /* It's a subroutine call.
+ (0) If we are not stepping over any calls ("stepi"), we
+ just stop.
+ (1) If we're doing a "next", we want to continue through
+ the call ("step over the call").
+ (2) If we are in a function-call trampoline (a stub between
+ the calling routine and the real function), locate
+ the real function and change stop_func_start.
+ (3) If we're doing a "step", and there are no debug symbols
+ at the target of the call, we want to continue through
+ it ("step over the call").
+ (4) Otherwise, we want to stop soon, after the function
+ prologue ("step into the call"). */
+
+ if (step_over_calls == 0)
{
- /* A subroutine call has happened. */
- /* Set a special breakpoint after the return */
+ /* I presume that step_over_calls is only 0 when we're
+ supposed to be stepping at the assembly language level. */
+ stop_step = 1;
+ break;
+ }
- step_resume_break_address =
- ADDR_BITS_REMOVE (
- SAVED_PC_AFTER_CALL (
- get_current_frame ()));
+ if (step_over_calls > 0)
+ goto step_over_function;
+
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (tmp != 0)
+ stop_func_start = tmp;
+
+ symtab = find_pc_symtab (stop_func_start);
+ if (symtab && LINETABLE (symtab))
+ goto step_into_function;
+
+step_over_function:
+ /* A subroutine call has happened. */
+ /* Set a special breakpoint after the return */
+ step_resume_break_address =
+ ADDR_BITS_REMOVE
+ (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ step_resume_break_duplicate
+ = breakpoint_here_p (step_resume_break_address);
+ if (breakpoints_inserted)
+ insert_step_breakpoint ();
+ goto save_pc;
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- }
+step_into_function:
/* Subroutine call with source code we should not step over.
Do step to the first line of code in it. */
- else if (step_over_calls)
- {
- SKIP_PROLOGUE (stop_func_start);
- sal = find_pc_line (stop_func_start, 0);
- /* Use the step_resume_break to step until
- the end of the prologue, even if that involves jumps
- (as it seems to on the vax under 4.2). */
- /* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
+ SKIP_PROLOGUE (stop_func_start);
+ sal = find_pc_line (stop_func_start, 0);
+ /* Use the step_resume_break to step until
+ the end of the prologue, even if that involves jumps
+ (as it seems to on the vax under 4.2). */
+ /* If the prologue ends in the middle of a source line,
+ continue to the end of that source line.
+ Otherwise, just go to end of prologue. */
#ifdef PROLOGUE_FIRSTLINE_OVERLAP
- /* no, don't either. It skips any code that's
- legitimately on the first line. */
+ /* no, don't either. It skips any code that's
+ legitimately on the first line. */
#else
- if (sal.end && sal.pc != stop_func_start)
- stop_func_start = sal.end;
+ if (sal.end && sal.pc != stop_func_start)
+ stop_func_start = sal.end;
#endif
-
- if (stop_func_start == stop_pc)
- {
- /* We are already there: stop now. */
- stop_step = 1;
- break;
- }
- else
- /* Put the step-breakpoint there and go until there. */
- {
- step_resume_break_address = stop_func_start;
-
- step_resume_break_duplicate
- = breakpoint_here_p (step_resume_break_address);
- if (breakpoints_inserted)
- insert_step_breakpoint ();
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- step_frame_address = 0;
- /* And make sure stepping stops right away then. */
- step_range_end = step_range_start;
- }
- }
- else
- {
- /* We get here only if step_over_calls is 0 and we
- just stepped into a subroutine. I presume
- that step_over_calls is only 0 when we're
- supposed to be stepping at the assembly
- language level.*/
- stop_step = 1;
- break;
- }
- }
- /* No subroutine call; stop now. */
- else
- {
- /* We've wandered out of the step range (but we haven't done a
- subroutine call or return (that's handled elsewhere)). We
- don't really want to stop until we encounter the start of a
- new statement. If so, we stop. Otherwise, we reset
- step_range_start and step_range_end, and just continue. */
- sal = find_pc_line(stop_pc, 0);
-
- if (step_range_end == 1 /* Don't do this for stepi/nexti */
- || sal.line == 0 /* Stop now if no line # info */
- || (current_line != sal.line
- && stop_pc == sal.pc))
+
+ if (stop_func_start == stop_pc)
{
+ /* We are already there: stop now. */
stop_step = 1;
break;
- }
- else if (sal.line != 0)
+ }
+ else
+ /* Put the step-breakpoint there and go until there. */
{
- /* This is probably not necessary, but it probably makes
- stepping more efficient, as we avoid calling
- find_pc_line() for each instruction we step over. */
- step_range_start = sal.pc;
- step_range_end = sal.end;
+ step_resume_break_address = stop_func_start;
+
+ step_resume_break_duplicate
+ = breakpoint_here_p (step_resume_break_address);
+ if (breakpoints_inserted)
+ insert_step_breakpoint ();
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_frame_address = 0;
+ /* And make sure stepping stops right away then. */
+ step_range_end = step_range_start;
}
+ goto save_pc;
}
+
+ /* We've wandered out of the step range (but haven't done a
+ subroutine call or return). */
+
+ sal = find_pc_line(stop_pc, 0);
+
+ if (step_range_end == 1 || /* stepi or nexti */
+ sal.line == 0 || /* ...or no line # info */
+ (stop_pc == sal.pc /* ...or we're at the start */
+ && current_line != sal.line)) { /* of a different line */
+ /* Stop because we're done stepping. */
+ stop_step = 1;
+ break;
+ } else {
+ /* We aren't done stepping, and we have line number info for $pc.
+ Optimize by setting the step_range for the line.
+ (We might not be in the original line, but if we entered a
+ new line in mid-statement, we continue stepping. This makes
+ things like for(;;) statements work better.) */
+ step_range_start = sal.pc;
+ step_range_end = sal.end;
+ goto save_pc;
+ }
+ /* We never fall through here */
}
- else if (trap_expected
- && IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ if (trap_expected
+ && IN_SIGTRAMP (stop_pc, stop_func_name)
+ && !IN_SIGTRAMP (prev_pc, prev_func_name))
{
/* What has happened here is that we have just stepped the inferior
with a signal (because it is a signal which shouldn't make
keep_going:
+save_pc:
/* Save the pc before execution, to compare with pc after stop. */
prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER
{
target_terminal_ours_for_output ();
print_sys_errmsg ("ptrace", breakpoints_failed);
- printf ("Stopped; cannot insert breakpoints.\n\
+ printf_filtered ("Stopped; cannot insert breakpoints.\n\
The same program may be running in another process.\n");
}
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf ("Cannot remove breakpoints because program is no longer writable.\n\
+ printf_filtered ("Cannot remove breakpoints because program is no longer writable.\n\
It might be running in another process.\n\
Further execution is probably impossible.\n");
}
target_terminal_ours ();
+ /* Look up the hook_stop and run it if it exists. */
+
+ if (stop_command->hook)
+ {
+ catch_errors (hook_stop_stub, (char *)stop_command->hook,
+ "Error while running hook_stop:\n");
+ }
+
if (!target_has_stack)
return;
select_frame (get_current_frame (), 0);
}
}
+
+static int
+hook_stop_stub (cmd)
+ char *cmd;
+{
+ execute_user_command ((struct cmd_list_element *)cmd, 0);
+ return (0);
+}
+
\f
static void
insert_step_breakpoint ()
step_resume_break_shadow);
}
\f
+int signal_stop_state (signo)
+ int signo;
+{
+ return ((signo >= 0 && signo < NSIG) ? signal_stop[signo] : 0);
+}
+
+int signal_print_state (signo)
+ int signo;
+{
+ return ((signo >= 0 && signo < NSIG) ? signal_print[signo] : 0);
+}
+
+int signal_pass_state (signo)
+ int signo;
+{
+ return ((signo >= 0 && signo < NSIG) ? signal_program[signo] : 0);
+}
+
static void
sig_print_header ()
{
sig_print_info (number)
int number;
{
- char *abbrev = sig_abbrev(number);
- if (abbrev == NULL)
+ char *name;
+
+ if ((name = strsigno (number)) == NULL)
printf_filtered ("%d\t\t", number);
else
- printf_filtered ("SIG%s (%d)\t", abbrev, number);
+ printf_filtered ("%s (%d)\t", name, number);
printf_filtered ("%s\t", signal_stop[number] ? "Yes" : "No");
printf_filtered ("%s\t", signal_print[number] ? "Yes" : "No");
printf_filtered ("%s\t\t", signal_program[number] ? "Yes" : "No");
- printf_filtered ("%s\n", sys_siglist[number]);
+ printf_filtered ("%s\n", safe_strsignal (number));
}
/* Specify how various signals in the inferior should be handled. */
char *args;
int from_tty;
{
- register char *p = args;
- int signum = 0;
- register int digits, wordlen;
- char *nextarg;
+ char **argv;
+ int digits, wordlen;
+ int sigfirst, signum, siglast;
+ int allsigs;
+ int nsigs;
+ unsigned char *sigs;
+ struct cleanup *old_chain;
+
+ if (args == NULL)
+ {
+ error_no_arg ("signal to handle");
+ }
+
+ /* Allocate and zero an array of flags for which signals to handle. */
+
+ nsigs = signo_max () + 1;
+ sigs = (unsigned char *) alloca (nsigs);
+ memset (sigs, 0, nsigs);
- if (!args)
- error_no_arg ("signal to handle");
+ /* Break the command line up into args. */
- while (*p)
+ argv = buildargv (args);
+ if (argv == NULL)
{
- /* Find the end of the next word in the args. */
- for (wordlen = 0;
- p[wordlen] && p[wordlen] != ' ' && p[wordlen] != '\t';
- wordlen++);
- /* Set nextarg to the start of the word after the one we just
- found, and null-terminate this one. */
- if (p[wordlen] == '\0')
- nextarg = p + wordlen;
- else
- {
- p[wordlen] = '\0';
- nextarg = p + wordlen + 1;
- }
-
+ nomem (0);
+ }
+ old_chain = make_cleanup (freeargv, (char *) argv);
- for (digits = 0; p[digits] >= '0' && p[digits] <= '9'; digits++);
+ /* Walk through the args, looking for signal numbers, signal names, and
+ actions. Signal numbers and signal names may be interspersed with
+ actions, with the actions being performed for all signals cumulatively
+ specified. Signal ranges can be specified as <LOW>-<HIGH>. */
+
+ while (*argv != NULL)
+ {
+ wordlen = strlen (*argv);
+ for (digits = 0; isdigit ((*argv)[digits]); digits++) {;}
+ allsigs = 0;
+ sigfirst = siglast = -1;
- if (signum == 0)
+ if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
+ {
+ /* Apply action to all signals except those used by the
+ debugger. Silently skip those. */
+ allsigs = 1;
+ sigfirst = 0;
+ siglast = nsigs - 1;
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_stop);
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_print);
+ }
+ else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+ {
+ SET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+ {
+ UNSET_SIGS (nsigs, sigs, signal_print);
+ UNSET_SIGS (nsigs, sigs, signal_stop);
+ }
+ else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
{
- /* It is the first argument--must be the signal to operate on. */
- if (digits == wordlen)
+ UNSET_SIGS (nsigs, sigs, signal_program);
+ }
+ else if (digits > 0)
+ {
+ sigfirst = siglast = atoi (*argv);
+ if ((*argv)[digits] == '-')
{
- /* Numeric. */
- signum = atoi (p);
- if (signum <= 0 || signum >= NSIG)
- {
- p[wordlen] = '\0';
- error ("Invalid signal %s given as argument to \"handle\".", p);
- }
+ siglast = atoi ((*argv) + digits + 1);
}
- else
+ if (sigfirst > siglast)
{
- /* Symbolic. */
- signum = sig_number (p);
- if (signum == -1)
- error ("No such signal \"%s\"", p);
+ /* Bet he didn't figure we'd think of this case... */
+ signum = sigfirst;
+ sigfirst = siglast;
+ siglast = signum;
}
-
- if (signum == SIGTRAP || signum == SIGINT)
+ if (sigfirst < 0 || sigfirst >= nsigs)
+ {
+ error ("Signal %d not in range 0-%d", sigfirst, nsigs - 1);
+ }
+ if (siglast < 0 || siglast >= nsigs)
{
- if (!query ("SIG%s is used by the debugger.\nAre you sure you want to change it? ", sig_abbrev (signum)))
- error ("Not confirmed.");
+ error ("Signal %d not in range 0-%d", siglast, nsigs - 1);
}
}
- /* Else, if already got a signal number, look for flag words
- saying what to do for it. */
- else if (!strncmp (p, "stop", wordlen))
+ else if ((signum = strtosigno (*argv)) != 0)
{
- signal_stop[signum] = 1;
- signal_print[signum] = 1;
+ sigfirst = siglast = signum;
}
- else if (wordlen >= 2 && !strncmp (p, "print", wordlen))
- signal_print[signum] = 1;
- else if (wordlen >= 2 && !strncmp (p, "pass", wordlen))
- signal_program[signum] = 1;
- else if (!strncmp (p, "ignore", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "nostop", wordlen))
- signal_stop[signum] = 0;
- else if (wordlen >= 4 && !strncmp (p, "noprint", wordlen))
+ else
{
- signal_print[signum] = 0;
- signal_stop[signum] = 0;
+ /* Not a number and not a recognized flag word => complain. */
+ error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
}
- else if (wordlen >= 4 && !strncmp (p, "nopass", wordlen))
- signal_program[signum] = 0;
- else if (wordlen >= 3 && !strncmp (p, "noignore", wordlen))
- signal_program[signum] = 1;
- /* Not a number and not a recognized flag word => complain. */
- else
+
+ /* If any signal numbers or symbol names were found, set flags for
+ which signals to apply actions to. */
+
+ for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
- error ("Unrecognized flag word: \"%s\".", p);
+ switch (signum)
+ {
+ case SIGTRAP:
+ case SIGINT:
+ if (!allsigs && !sigs[signum])
+ {
+ if (query ("%s is used by the debugger.\nAre you sure you want to change it? ", strsigno (signum)))
+ {
+ sigs[signum] = 1;
+ }
+ else
+ {
+ printf ("Not confirmed, unchanged.\n");
+ fflush (stdout);
+ }
+ }
+ break;
+ default:
+ sigs[signum] = 1;
+ break;
+ }
}
- /* Find start of next word. */
- p = nextarg;
- while (*p == ' ' || *p == '\t') p++;
+ argv++;
}
+ target_notice_signals();
+
if (from_tty)
{
/* Show the results. */
sig_print_header ();
- sig_print_info (signum);
+ for (signum = 0; signum < nsigs; signum++)
+ {
+ if (sigs[signum])
+ {
+ sig_print_info (signum);
+ }
+ }
}
+
+ do_cleanups (old_chain);
}
/* Print current contents of the tables set by the handle command. */
static void
-signals_info (signum_exp)
+signals_info (signum_exp, from_tty)
char *signum_exp;
+ int from_tty;
{
register int i;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
- i = sig_number (signum_exp);
- if (i == -1)
+ i = strtosigno (signum_exp);
+ if (i == 0)
{
/* Nope, maybe it's an address which evaluates to a signal
number. */
inf_status->restore_stack_info = restore_stack_info;
inf_status->proceed_to_finish = proceed_to_finish;
- bcopy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
+ memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
record_selected_frame (&(inf_status->selected_frame_address),
&(inf_status->selected_level));
breakpoint_proceeded = inf_status->breakpoint_proceeded;
proceed_to_finish = inf_status->proceed_to_finish;
- bcopy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+ memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
/* The inferior can be gone if the user types "print exit(0)"
(and perhaps other times). */
FRAME_FP (fid) != inf_status->selected_frame_address ||
level != 0)
{
-#if 0
+#if 1
/* I'm not sure this error message is a good idea. I have
only seen it occur after "Can't continue previously
requested operation" (we get called from do_cleanups), in
_initialize_infrun ()
{
register int i;
+ register int numsigs;
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
Specify a signal number as argument to print info on that signal only.");
+ add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command,
"Specify how to handle a signal.\n\
-Args are signal number followed by flags.\n\
-Flags allowed are \"stop\", \"print\", \"pass\",\n\
- \"nostop\", \"noprint\" or \"nopass\".\n\
-Print means print a message if this signal happens.\n\
+Args are signal numbers and actions to apply to those signals.\n\
+Signal numbers may be numeric (ex. 11) or symbolic (ex. SIGSEGV).\n\
+Numeric ranges may be specified with the form LOW-HIGH (ex. 14-21).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
Pass and Stop may be combined.");
- for (i = 0; i < NSIG; i++)
+ stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
+ "There is no `stop' command, but you can set a hook on `stop'.\n\
+This allows you to set a list of commands to be run each time execution\n\
+of the inferior program stops.", &cmdlist);
+
+ numsigs = signo_max () + 1;
+ signal_stop = (unsigned char *)
+ xmalloc (sizeof (signal_stop[0]) * numsigs);
+ signal_print = (unsigned char *)
+ xmalloc (sizeof (signal_print[0]) * numsigs);
+ signal_program = (unsigned char *)
+ xmalloc (sizeof (signal_program[0]) * numsigs);
+ for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
signal_print[i] = 1;