#include "skip.h"
#include "probe.h"
#include "objfiles.h"
+#include "completer.h"
+#include "target-descriptions.h"
/* Prototypes for local functions */
fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value);
}
-int debug_infrun = 0;
+unsigned int debug_infrun = 0;
static void
show_debug_infrun (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
void init_thread_stepping_state (struct thread_info *tss);
-void init_infwait_state (void);
+static void init_infwait_state (void);
static const char follow_fork_mode_child[] = "child";
static const char follow_fork_mode_parent[] = "parent";
/* follow-fork child, detach-on-fork on. */
- old_chain = make_cleanup_restore_current_thread ();
+ inf->vfork_parent->pending_detach = 0;
+
+ if (!exec)
+ {
+ /* If we're handling a child exit, then inferior_ptid
+ points at the inferior's pid, not to a thread. */
+ old_chain = save_inferior_ptid ();
+ save_current_program_space ();
+ save_current_inferior ();
+ }
+ else
+ old_chain = save_current_space_and_thread ();
/* We're letting loose of the parent. */
tp = any_live_thread_of_process (inf->vfork_parent->pid);
set_current_inferior (inf);
set_current_program_space (pspace);
}
+ else
+ {
+ /* The old description may no longer be fit for the new image.
+ E.g, a 64-bit process exec'ed a 32-bit process. Clear the
+ old description; we'll read a new one below. No need to do
+ this on "follow-exec-mode new", as the old inferior stays
+ around (its description is later cleared/refetched on
+ restart). */
+ target_clear_description ();
+ }
gdb_assert (current_program_space == inf->pspace);
if ((inf->symfile_flags & SYMFILE_NO_READ) == 0)
set_initial_language ();
+ /* If the target can specify a description, read it. Must do this
+ after flipping to the new executable (because the target supplied
+ description must be compatible with the executable's
+ architecture, and the old executable may e.g., be 32-bit, while
+ the new one 64-bit), and before anything involving memory or
+ registers. */
+ target_find_description ();
+
#ifdef SOLIB_CREATE_INFERIOR_HOOK
SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
#else
remove_displaced_stepping_state (inf->pid);
}
-/* Enum strings for "set|show displaced-stepping". */
-
-static const char can_use_displaced_stepping_auto[] = "auto";
-static const char can_use_displaced_stepping_on[] = "on";
-static const char can_use_displaced_stepping_off[] = "off";
-static const char *const can_use_displaced_stepping_enum[] =
-{
- can_use_displaced_stepping_auto,
- can_use_displaced_stepping_on,
- can_use_displaced_stepping_off,
- NULL,
-};
-
/* If ON, and the architecture supports it, GDB will use displaced
stepping to step over breakpoints. If OFF, or if the architecture
doesn't support it, GDB will instead use the traditional
which of all-stop or non-stop mode is active --- displaced stepping
in non-stop mode; hold-and-step in all-stop mode. */
-static const char *can_use_displaced_stepping =
- can_use_displaced_stepping_auto;
+static enum auto_boolean can_use_displaced_stepping = AUTO_BOOLEAN_AUTO;
static void
show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
struct cmd_list_element *c,
const char *value)
{
- if (can_use_displaced_stepping == can_use_displaced_stepping_auto)
+ if (can_use_displaced_stepping == AUTO_BOOLEAN_AUTO)
fprintf_filtered (file,
_("Debugger's willingness to use displaced stepping "
"to step over breakpoints is %s (currently %s).\n"),
static int
use_displaced_stepping (struct gdbarch *gdbarch)
{
- return (((can_use_displaced_stepping == can_use_displaced_stepping_auto
- && non_stop)
- || can_use_displaced_stepping == can_use_displaced_stepping_on)
+ return (((can_use_displaced_stepping == AUTO_BOOLEAN_AUTO && non_stop)
+ || can_use_displaced_stepping == AUTO_BOOLEAN_TRUE)
&& gdbarch_displaced_step_copy_insn_p (gdbarch)
&& !RECORD_IS_USED);
}
ptid_t waiton_ptid;
/* Current inferior wait state. */
-enum infwait_states infwait_state;
+static enum infwait_states infwait_state;
/* Data to be passed around while handling an event. This data is
discarded between events. */
old_chain = make_cleanup_restore_current_thread ();
- switch_to_thread (info->ptid);
-
/* Go through handle_inferior_event/normal_stop, so we always
have consistent output as if the stop event had been
reported. */
old_chain_2 = make_cleanup (finish_thread_state_cleanup,
&minus_one_ptid);
- /* In non-stop mode, each thread is handled individually.
- Switch early, so the global state is set correctly for this
- thread. */
- if (non_stop
- && ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
- context_switch (ecs->ptid);
-
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
if (debug_infrun)
print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
- if (non_stop
- && ecs->ws.kind != TARGET_WAITKIND_IGNORE
- && ecs->ws.kind != TARGET_WAITKIND_NO_RESUMED
- && ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
- /* In non-stop mode, each thread is handled individually. Switch
- early, so the global state is set correctly for this
- thread. */
- context_switch (ecs->ptid);
-
/* If an error happens while handling the event, propagate GDB's
knowledge of the executing state to the frontend/user running
state. */
}
}
-void
+static void
init_infwait_state (void)
{
waiton_ptid = pid_to_ptid (-1);
infwait_state = infwait_normal_state;
}
-void
-error_is_running (void)
-{
- error (_("Cannot execute this command while "
- "the selected thread is running."));
-}
-
-void
-ensure_not_running (void)
-{
- if (is_running (inferior_ptid))
- error_is_running ();
-}
-
static int
stepped_in_from (struct frame_info *frame, struct frame_id step_frame_id)
{
}
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
- && !ptid_equal (ecs->ptid, minus_one_ptid))
+ && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
{
ecs->event_thread = find_thread_ptid (ecs->ptid);
/* If it's a new thread, add it to the thread database. */
we're attaching or setting up a remote connection. */
if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
{
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+
/* Loading of shared libraries might have changed breakpoint
addresses. Make sure new breakpoints are inserted. */
if (stop_soon == NO_STOP_QUIETLY
case TARGET_WAITKIND_SPURIOUS:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
resume (0, GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
+ case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
+ {
+ if (ecs->ws.kind == TARGET_WAITKIND_EXITED)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_EXITED\n");
+ else
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_SIGNALLED\n");
+ }
+
inferior_ptid = ecs->ptid;
set_current_inferior (find_inferior_pid (ptid_get_pid (ecs->ptid)));
set_current_program_space (current_inferior ()->pspace);
handle_vfork_child_exec_or_exit (0);
target_terminal_ours (); /* Must do this before mourn anyway. */
- print_exited_reason (ecs->ws.value.integer);
- /* Record the exit code in the convenience variable $_exitcode, so
- that the user can inspect this again later. */
- set_internalvar_integer (lookup_internalvar ("_exitcode"),
- (LONGEST) ecs->ws.value.integer);
+ if (ecs->ws.kind == TARGET_WAITKIND_EXITED)
+ {
+ /* Record the exit code in the convenience variable $_exitcode, so
+ that the user can inspect this again later. */
+ set_internalvar_integer (lookup_internalvar ("_exitcode"),
+ (LONGEST) ecs->ws.value.integer);
- /* Also record this in the inferior itself. */
- current_inferior ()->has_exit_code = 1;
- current_inferior ()->exit_code = (LONGEST) ecs->ws.value.integer;
+ /* Also record this in the inferior itself. */
+ current_inferior ()->has_exit_code = 1;
+ current_inferior ()->exit_code = (LONGEST) ecs->ws.value.integer;
+
+ print_exited_reason (ecs->ws.value.integer);
+ }
+ else
+ print_signal_exited_reason (ecs->ws.value.sig);
gdb_flush (gdb_stdout);
target_mourn_inferior ();
stop_stepping (ecs);
return;
- case TARGET_WAITKIND_SIGNALLED:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
- inferior_ptid = ecs->ptid;
- set_current_inferior (find_inferior_pid (ptid_get_pid (ecs->ptid)));
- set_current_program_space (current_inferior ()->pspace);
- handle_vfork_child_exec_or_exit (0);
- stop_print_frame = 0;
- target_terminal_ours (); /* Must do this before mourn anyway. */
-
- /* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
- reach here unless the inferior is dead. However, for years
- target_kill() was called here, which hints that fatal signals aren't
- really fatal on some systems. If that's true, then some changes
- may be needed. */
- target_mourn_inferior ();
-
- print_signal_exited_reason (ecs->ws.value.sig);
- singlestep_breakpoints_inserted_p = 0;
- cancel_single_step_breakpoints ();
- stop_stepping (ecs);
- return;
-
/* The following are the only cases in which we keep going;
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
+ {
+ if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
+ else
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_VFORKED\n");
+ }
/* Check whether the inferior is displaced stepping. */
{
vfork follow are detached. */
if (ecs->ws.kind != TARGET_WAITKIND_VFORKED)
{
- int child_pid = ptid_get_pid (ecs->ws.value.related_pid);
-
/* This won't actually modify the breakpoint list, but will
physically remove the breakpoints from the child. */
- detach_breakpoints (child_pid);
+ detach_breakpoints (ecs->ws.value.related_pid);
}
if (singlestep_breakpoints_inserted_p)
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_NO_HISTORY\n");
/* Reverse execution: target ran out of history info. */
+
+ /* Pull the single step breakpoints out of the target. */
+ if (singlestep_breakpoints_inserted_p)
+ {
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ remove_single_step_breakpoints ();
+ singlestep_breakpoints_inserted_p = 0;
+ }
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
print_no_history_reason ();
stop_stepping (ecs);
"infrun: stepping_past_"
"singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
context_switch (saved_singlestep_ptid);
if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (ecs->ptid));
+ deprecated_context_hook (pid_to_thread_id (saved_singlestep_ptid));
resume (1, GDB_SIGNAL_0);
prepare_to_wait (ecs);
/* Pull the single step breakpoints out of the target. */
if (singlestep_breakpoints_inserted_p)
{
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
skip_inline_frames call would break things. Fortunately
that's an extremely unlikely scenario. */
if (!pc_at_non_inline_function (aspace, stop_pc, &ecs->ws)
- && !(ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
- && ecs->event_thread->control.trap_expected
- && pc_at_non_inline_function (aspace,
- ecs->event_thread->prev_pc,
+ && !(ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
+ && ecs->event_thread->control.trap_expected
+ && pc_at_non_inline_function (aspace,
+ ecs->event_thread->prev_pc,
&ecs->ws)))
- skip_inline_frames (ecs->ptid);
+ {
+ skip_inline_frames (ecs->ptid);
+
+ /* Re-fetch current thread's frame in case that invalidated
+ the frame cache. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
+ }
}
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
(leaving the inferior at the step-resume-breakpoint without
actually executing it). Either way continue until the
breakpoint is really hit. */
- keep_going (ecs);
- return;
}
+ else
+ {
+ /* Handle cases caused by hitting a breakpoint. */
- /* Handle cases caused by hitting a breakpoint. */
- {
- CORE_ADDR jmp_buf_pc;
- struct bpstat_what what;
-
- what = bpstat_what (ecs->event_thread->control.stop_bpstat);
-
- if (what.call_dummy)
- {
- stop_stack_dummy = what.call_dummy;
- }
+ CORE_ADDR jmp_buf_pc;
+ struct bpstat_what what;
- /* If we hit an internal event that triggers symbol changes, the
- current frame will be invalidated within bpstat_what (e.g., if
- we hit an internal solib event). Re-fetch it. */
- frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
+ what = bpstat_what (ecs->event_thread->control.stop_bpstat);
- switch (what.main_action)
- {
- case BPSTAT_WHAT_SET_LONGJMP_RESUME:
- /* If we hit the breakpoint at longjmp while stepping, we
- install a momentary breakpoint at the target of the
- jmp_buf. */
+ if (what.call_dummy)
+ {
+ stop_stack_dummy = what.call_dummy;
+ }
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
+ /* If we hit an internal event that triggers symbol changes, the
+ current frame will be invalidated within bpstat_what (e.g.,
+ if we hit an internal solib event). Re-fetch it. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
- ecs->event_thread->stepping_over_breakpoint = 1;
+ switch (what.main_action)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp while stepping, we
+ install a momentary breakpoint at the target of the
+ jmp_buf. */
- if (what.is_longjmp)
- {
- struct value *arg_value;
-
- /* If we set the longjmp breakpoint via a SystemTap probe,
- then use it to extract the arguments. The destination
- PC is the third argument to the probe. */
- arg_value = probe_safe_evaluate_at_pc (frame, 2);
- if (arg_value)
- jmp_buf_pc = value_as_address (arg_value);
- else if (!gdbarch_get_longjmp_target_p (gdbarch)
- || !gdbarch_get_longjmp_target (gdbarch,
- frame, &jmp_buf_pc))
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
- "(!gdbarch_get_longjmp_target)\n");
- keep_going (ecs);
- return;
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
- /* We're going to replace the current step-resume breakpoint
- with a longjmp-resume breakpoint. */
- delete_step_resume_breakpoint (ecs->event_thread);
+ ecs->event_thread->stepping_over_breakpoint = 1;
- /* Insert a breakpoint at resume address. */
- insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
- }
- else
- check_exception_resume (ecs, frame);
- keep_going (ecs);
- return;
+ if (what.is_longjmp)
+ {
+ struct value *arg_value;
+
+ /* If we set the longjmp breakpoint via a SystemTap
+ probe, then use it to extract the arguments. The
+ destination PC is the third argument to the
+ probe. */
+ arg_value = probe_safe_evaluate_at_pc (frame, 2);
+ if (arg_value)
+ jmp_buf_pc = value_as_address (arg_value);
+ else if (!gdbarch_get_longjmp_target_p (gdbarch)
+ || !gdbarch_get_longjmp_target (gdbarch,
+ frame, &jmp_buf_pc))
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
+ "(!gdbarch_get_longjmp_target)\n");
+ keep_going (ecs);
+ return;
+ }
- case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
+ /* Insert a breakpoint at resume address. */
+ insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
+ }
+ else
+ check_exception_resume (ecs, frame);
+ keep_going (ecs);
+ return;
- if (what.is_longjmp)
- {
- gdb_assert (ecs->event_thread->control.step_resume_breakpoint
- != NULL);
- delete_step_resume_breakpoint (ecs->event_thread);
- }
- else
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
{
+ struct frame_info *init_frame;
+
/* There are several cases to consider.
1. The initiating frame no longer exists. In this case
- we must stop, because the exception has gone too far.
+ we must stop, because the exception or longjmp has gone
+ too far.
2. The initiating frame exists, and is the same as the
- current frame. We stop, because the exception has been
- caught.
+ current frame. We stop, because the exception or
+ longjmp has been caught.
3. The initiating frame exists and is different from
- the current frame. This means the exception has been
- caught beneath the initiating frame, so keep going. */
- struct frame_info *init_frame
- = frame_find_by_id (ecs->event_thread->initiating_frame);
+ the current frame. This means the exception or longjmp
+ has been caught beneath the initiating frame, so keep
+ going.
+
+ 4. longjmp breakpoint has been placed just to protect
+ against stale dummy frames and user is not interested
+ in stopping around longjmps. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
gdb_assert (ecs->event_thread->control.exception_resume_breakpoint
!= NULL);
delete_exception_resume_breakpoint (ecs->event_thread);
+ if (what.is_longjmp)
+ {
+ check_longjmp_breakpoint_for_call_dummy (ecs->event_thread->num);
+
+ if (!frame_id_p (ecs->event_thread->initiating_frame))
+ {
+ /* Case 4. */
+ keep_going (ecs);
+ return;
+ }
+ }
+
+ init_frame = frame_find_by_id (ecs->event_thread->initiating_frame);
+
if (init_frame)
{
struct frame_id current_id
/* For Cases 1 and 2, remove the step-resume breakpoint,
if it exists. */
delete_step_resume_breakpoint (ecs->event_thread);
+
+ ecs->event_thread->control.stop_step = 1;
+ print_end_stepping_range_reason ();
+ stop_stepping (ecs);
}
+ return;
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
- return;
-
- case BPSTAT_WHAT_SINGLE:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
- ecs->event_thread->stepping_over_breakpoint = 1;
- /* Still need to check other stuff, at least the case
- where we are stepping and step out of the right range. */
- break;
+ case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ /* Still need to check other stuff, at least the case where
+ we are stepping and step out of the right range. */
+ break;
- case BPSTAT_WHAT_STEP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
+ case BPSTAT_WHAT_STEP_RESUME:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
- delete_step_resume_breakpoint (ecs->event_thread);
- if (ecs->event_thread->control.proceed_to_finish
- && execution_direction == EXEC_REVERSE)
- {
- struct thread_info *tp = ecs->event_thread;
-
- /* We are finishing a function in reverse, and just hit
- the step-resume breakpoint at the start address of the
- function, and we're almost there -- just need to back
- up by one more single-step, which should take us back
- to the function call. */
- tp->control.step_range_start = tp->control.step_range_end = 1;
- keep_going (ecs);
- return;
- }
- fill_in_stop_func (gdbarch, ecs);
- if (stop_pc == ecs->stop_func_start
- && execution_direction == EXEC_REVERSE)
- {
- /* We are stepping over a function call in reverse, and
- just hit the step-resume breakpoint at the start
- address of the function. Go back to single-stepping,
- which should take us back to the function call. */
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- break;
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->control.proceed_to_finish
+ && execution_direction == EXEC_REVERSE)
+ {
+ struct thread_info *tp = ecs->event_thread;
+
+ /* We are finishing a function in reverse, and just hit
+ the step-resume breakpoint at the start address of
+ the function, and we're almost there -- just need to
+ back up by one more single-step, which should take us
+ back to the function call. */
+ tp->control.step_range_start = tp->control.step_range_end = 1;
+ keep_going (ecs);
+ return;
+ }
+ fill_in_stop_func (gdbarch, ecs);
+ if (stop_pc == ecs->stop_func_start
+ && execution_direction == EXEC_REVERSE)
+ {
+ /* We are stepping over a function call in reverse, and
+ just hit the step-resume breakpoint at the start
+ address of the function. Go back to single-stepping,
+ which should take us back to the function call. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+ break;
- case BPSTAT_WHAT_STOP_NOISY:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
- stop_print_frame = 1;
+ case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
+ stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpointt via the
- cleanup chain, so no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpointt via the
+ cleanup chain, so no need to worry about it here. */
- stop_stepping (ecs);
- return;
+ stop_stepping (ecs);
+ return;
- case BPSTAT_WHAT_STOP_SILENT:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
- stop_print_frame = 0;
+ case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
+ stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoin via the
- cleanup chain, so no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpoin via the
+ cleanup chain, so no need to worry about it here. */
- stop_stepping (ecs);
- return;
+ stop_stepping (ecs);
+ return;
- case BPSTAT_WHAT_HP_STEP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
+ case BPSTAT_WHAT_HP_STEP_RESUME:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
- delete_step_resume_breakpoint (ecs->event_thread);
- if (ecs->event_thread->step_after_step_resume_breakpoint)
- {
- /* Back when the step-resume breakpoint was inserted, we
- were trying to single-step off a breakpoint. Go back
- to doing that. */
- ecs->event_thread->step_after_step_resume_breakpoint = 0;
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- break;
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->step_after_step_resume_breakpoint)
+ {
+ /* Back when the step-resume breakpoint was inserted, we
+ were trying to single-step off a breakpoint. Go back
+ to doing that. */
+ ecs->event_thread->step_after_step_resume_breakpoint = 0;
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+ break;
- case BPSTAT_WHAT_KEEP_CHECKING:
- break;
- }
- }
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
+ }
+ }
/* We come here if we hit a breakpoint but should not
stop for it. Possibly we also were stepping
if (execution_direction == EXEC_REVERSE)
{
- struct symtab_and_line sr_sal;
-
- /* Normal function call return (static or dynamic). */
- init_sal (&sr_sal);
- sr_sal.pc = ecs->stop_func_start;
- sr_sal.pspace = get_frame_program_space (frame);
- insert_step_resume_breakpoint_at_sal (gdbarch,
- sr_sal, null_frame_id);
+ /* If we're already at the start of the function, we've either
+ just stepped backward into a single instruction function,
+ or stepped back out of a signal handler to the first instruction
+ of the function. Just keep going, which will single-step back
+ to the caller. */
+ if (ecs->stop_func_start != stop_pc)
+ {
+ struct symtab_and_line sr_sal;
+
+ /* Normal function call return (static or dynamic). */
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
+ sr_sal.pspace = get_frame_program_space (frame);
+ insert_step_resume_breakpoint_at_sal (gdbarch,
+ sr_sal, null_frame_id);
+ }
}
else
insert_step_resume_breakpoint_at_caller (frame);
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
if (tmp_sal.line != 0
- && !function_pc_is_marked_for_skip (ecs->stop_func_start))
+ && !function_name_is_marked_for_skip (ecs->stop_func_name,
+ &tmp_sal))
{
if (execution_direction == EXEC_REVERSE)
handle_step_into_function_backward (gdbarch, ecs);
if (execution_direction == EXEC_REVERSE)
{
- /* Set a breakpoint at callee's start address.
- From there we can step once and be back in the caller. */
- struct symtab_and_line sr_sal;
+ /* If we're already at the start of the function, we've either just
+ stepped backward into a single instruction function without line
+ number info, or stepped back out of a signal handler to the first
+ instruction of the function without line number info. Just keep
+ going, which will single-step back to the caller. */
+ if (ecs->stop_func_start != stop_pc)
+ {
+ /* Set a breakpoint at callee's start address.
+ From there we can step once and be back in the caller. */
+ struct symtab_and_line sr_sal;
- init_sal (&sr_sal);
- sr_sal.pc = ecs->stop_func_start;
- sr_sal.pspace = get_frame_program_space (frame);
- insert_step_resume_breakpoint_at_sal (gdbarch,
- sr_sal, null_frame_id);
+ init_sal (&sr_sal);
+ sr_sal.pc = ecs->stop_func_start;
+ sr_sal.pspace = get_frame_program_space (frame);
+ insert_step_resume_breakpoint_at_sal (gdbarch,
+ sr_sal, null_frame_id);
+ }
}
else
/* Set a breakpoint at callee's return address (the address
static void
insert_longjmp_resume_breakpoint (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- /* There should never be more than one step-resume or longjmp-resume
- breakpoint per thread, so we should never be setting a new
+ /* There should never be more than one longjmp-resume breakpoint per
+ thread, so we should never be setting a new
longjmp_resume_breakpoint when one is already active. */
- gdb_assert (inferior_thread ()->control.step_resume_breakpoint == NULL);
+ gdb_assert (inferior_thread ()->control.exception_resume_breakpoint == NULL);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: inserting longjmp-resume breakpoint at %s\n",
paddress (gdbarch, pc));
- inferior_thread ()->control.step_resume_breakpoint =
+ inferior_thread ()->control.exception_resume_breakpoint =
set_momentary_breakpoint_at_pc (gdbarch, pc, bp_longjmp_resume);
}
static void
insert_exception_resume_from_probe (struct thread_info *tp,
const struct probe *probe,
- struct objfile *objfile,
struct frame_info *frame)
{
struct value *arg_value;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: exception resume at %s\n",
- paddress (get_objfile_arch (objfile),
+ paddress (get_objfile_arch (probe->objfile),
handler));
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
struct frame_info *frame)
{
volatile struct gdb_exception e;
- struct objfile *objfile;
const struct probe *probe;
struct symbol *func;
SystemTap probe point. If so, the probe has two arguments: the
CFA and the HANDLER. We ignore the CFA, extract the handler, and
set a breakpoint there. */
- probe = find_probe_by_pc (get_frame_pc (frame), &objfile);
+ probe = find_probe_by_pc (get_frame_pc (frame));
if (probe)
{
- insert_exception_resume_from_probe (ecs->event_thread, probe,
- objfile, frame);
+ insert_exception_resume_from_probe (ecs->event_thread, probe, frame);
return;
}
do_cleanups (old_chain);
}
+/* Complete the "handle" command. */
+
+static VEC (char_ptr) *
+handle_completer (struct cmd_list_element *ignore,
+ char *text, char *word)
+{
+ VEC (char_ptr) *vec_signals, *vec_keywords, *return_val;
+ static const char * const keywords[] =
+ {
+ "all",
+ "stop",
+ "ignore",
+ "print",
+ "pass",
+ "nostop",
+ "noignore",
+ "noprint",
+ "nopass",
+ NULL,
+ };
+
+ vec_signals = signal_completer (ignore, text, word);
+ vec_keywords = complete_on_enum (keywords, word, word);
+
+ return_val = VEC_merge (char_ptr, vec_signals, vec_keywords);
+ VEC_free (char_ptr, vec_signals);
+ VEC_free (char_ptr, vec_keywords);
+ return return_val;
+}
+
static void
xdb_handle_command (char *args, int from_tty)
{
struct infcall_suspend_state
{
struct thread_suspend_state thread_suspend;
+#if 0 /* Currently unused and empty structures are not valid C. */
struct inferior_suspend_state inferior_suspend;
+#endif
/* Other fields: */
CORE_ADDR stop_pc;
}
inf_state->thread_suspend = tp->suspend;
+#if 0 /* Currently unused and empty structures are not valid C. */
inf_state->inferior_suspend = inf->suspend;
+#endif
/* run_inferior_call will not use the signal due to its `proceed' call with
GDB_SIGNAL_0 anyway. */
struct gdbarch *gdbarch = get_regcache_arch (regcache);
tp->suspend = inf_state->thread_suspend;
+#if 0 /* Currently unused and empty structures are not valid C. */
inf->suspend = inf_state->inferior_suspend;
+#endif
stop_pc = inf_state->stop_pc;
if (inf_state->siginfo_gdbarch == gdbarch)
{
struct type *type = gdbarch_get_siginfo_type (gdbarch);
- size_t len = TYPE_LENGTH (type);
/* Errors ignored. */
target_write (¤t_target, TARGET_OBJECT_SIGNAL_INFO, NULL,
- inf_state->siginfo_data, 0, len);
+ inf_state->siginfo_data, 0, TYPE_LENGTH (type));
}
/* The inferior can be gone if the user types "print exit(0)"
{
int i;
int numsigs;
+ struct cmd_list_element *c;
add_info ("signals", signals_info, _("\
What debugger does when program gets various signals.\n\
Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
- add_com ("handle", class_run, handle_command, _("\
-Specify how to handle a signal.\n\
+ c = add_com ("handle", class_run, handle_command, _("\
+Specify how to handle signals.\n\
+Usage: handle SIGNAL [ACTIONS]\n\
Args are signals and actions to apply to those signals.\n\
+If no actions are specified, the current settings for the specified signals\n\
+will be displayed instead.\n\
+\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
used by the debugger, typically SIGTRAP and SIGINT.\n\
+\n\
Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined."));
+Pass and Stop may be combined.\n\
+\n\
+Multiple signals may be specified. Signal numbers and signal names\n\
+may be interspersed with actions, with the actions being performed for\n\
+all signals cumulatively specified."));
+ set_cmd_completer (c, handle_completer);
+
if (xdb_commands)
{
add_com ("lz", class_info, signals_info, _("\
This allows you to set a list of commands to be run each time execution\n\
of the program stops."), &cmdlist);
- add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
+ add_setshow_zuinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
Set inferior debugging."), _("\
Show inferior debugging."), _("\
When non-zero, inferior specific debugging is enabled."),
- NULL,
- show_debug_infrun,
- &setdebuglist, &showdebuglist);
+ NULL,
+ show_debug_infrun,
+ &setdebuglist, &showdebuglist);
add_setshow_boolean_cmd ("displaced", class_maintenance,
&debug_displaced, _("\
show_step_stop_if_no_debug,
&setlist, &showlist);
- add_setshow_enum_cmd ("displaced-stepping", class_run,
- can_use_displaced_stepping_enum,
- &can_use_displaced_stepping, _("\
+ add_setshow_auto_boolean_cmd ("displaced-stepping", class_run,
+ &can_use_displaced_stepping, _("\
Set debugger's willingness to use displaced stepping."), _("\
Show debugger's willingness to use displaced stepping."), _("\
If on, gdb will use displaced stepping to step over breakpoints if it is\n\
architecture. If auto (which is the default), gdb will use displaced stepping\n\
if the target architecture supports it and non-stop mode is active, but will not\n\
use it in all-stop mode (see help set non-stop)."),
- NULL,
- show_can_use_displaced_stepping,
- &setlist, &showlist);
+ NULL,
+ show_can_use_displaced_stepping,
+ &setlist, &showlist);
add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names,
&exec_direction, _("Set direction of execution.\n\
projects / deliverable / binutils-gdb.git / blobdiff