/* Target-struct-independent code to start (run) and stop an inferior process.
- Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993
+ Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* Notes on the algorithm used in wait_for_inferior to determine if we
- just did a subroutine call when stepping. We have the following
- information at that point:
-
- Current and previous (just before this step) pc.
- Current and previous sp.
- Current and previous start of current function.
-
- If the starts of the functions don't match, then
-
- a) We did a subroutine call.
-
- In this case, the pc will be at the beginning of a function.
-
- b) We did a subroutine return.
-
- Otherwise.
-
- c) We did a longjmp.
-
- If we did a longjump, we were doing "nexti", since a next would
- have attempted to skip over the assembly language routine in which
- the longjmp is coded and would have simply been the equivalent of a
- continue. I consider this ok behaivior. We'd like one of two
- things to happen if we are doing a nexti through the longjmp()
- routine: 1) It behaves as a stepi, or 2) It acts like a continue as
- above. Given that this is a special case, and that anybody who
- thinks that the concept of sub calls is meaningful in the context
- of a longjmp, I'll take either one. Let's see what happens.
-
- Acts like a subroutine return. I can handle that with no problem
- at all.
-
- -->So: If the current and previous beginnings of the current
- function don't match, *and* the pc is at the start of a function,
- we've done a subroutine call. If the pc is not at the start of a
- function, we *didn't* do a subroutine call.
-
- -->If the beginnings of the current and previous function do match,
- either:
-
- a) We just did a recursive call.
-
- In this case, we would be at the very beginning of a
- function and 1) it will have a prologue (don't jump to
- before prologue, or 2) (we assume here that it doesn't have
- a prologue) there will have been a change in the stack
- pointer over the last instruction. (Ie. it's got to put
- the saved pc somewhere. The stack is the usual place. In
- a recursive call a register is only an option if there's a
- prologue to do something with it. This is even true on
- register window machines; the prologue sets up the new
- window. It might not be true on a register window machine
- where the call instruction moved the register window
- itself. Hmmm. One would hope that the stack pointer would
- also change. If it doesn't, somebody send me a note, and
- I'll work out a more general theory.
- bug-gdb@prep.ai.mit.edu). This is true (albeit slipperly
- so) on all machines I'm aware of:
-
- m68k: Call changes stack pointer. Regular jumps don't.
-
- sparc: Recursive calls must have frames and therefor,
- prologues.
-
- vax: All calls have frames and hence change the
- stack pointer.
-
- b) We did a return from a recursive call. I don't see that we
- have either the ability or the need to distinguish this
- from an ordinary jump. The stack frame will be printed
- when and if the frame pointer changes; if we are in a
- function without a frame pointer, it's the users own
- lookout.
-
- c) We did a jump within a function. We assume that this is
- true if we didn't do a recursive call.
-
- d) We are in no-man's land ("I see no symbols here"). We
- don't worry about this; it will make calls look like simple
- jumps (and the stack frames will be printed when the frame
- pointer moves), which is a reasonably non-violent response.
-*/
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include <string.h>
+#include "gdb_string.h"
#include <ctype.h>
#include "symtab.h"
#include "frame.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "target.h"
+#include "gdbthread.h"
+#include "annotate.h"
#include <signal.h>
/* Prototypes for local functions */
-static void
-signals_info PARAMS ((char *, int));
+static void signals_info PARAMS ((char *, int));
-static void
-handle_command PARAMS ((char *, int));
+static void handle_command PARAMS ((char *, int));
-static void
-sig_print_info PARAMS ((int));
+static void sig_print_info PARAMS ((enum target_signal));
-static void
-sig_print_header PARAMS ((void));
+static void sig_print_header PARAMS ((void));
-static void
-resume_cleanups PARAMS ((int));
+static void resume_cleanups PARAMS ((int));
-static int
-hook_stop_stub PARAMS ((char *));
+static int hook_stop_stub PARAMS ((char *));
+
+static void delete_breakpoint_current_contents PARAMS ((PTR));
/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
program. It needs to examine the jmp_buf argument and extract the PC
from it. The return value is non-zero on success, zero otherwise. */
+
#ifndef GET_LONGJMP_TARGET
#define GET_LONGJMP_TARGET(PC_ADDR) 0
#endif
/* Some machines have trampoline code that sits between function callers
and the actual functions themselves. If this machine doesn't have
such things, disable their processing. */
+
#ifndef SKIP_TRAMPOLINE_CODE
#define SKIP_TRAMPOLINE_CODE(pc) 0
#endif
+/* Dynamic function trampolines are similar to solib trampolines in that they
+ are between the caller and the callee. The difference is that when you
+ enter a dynamic trampoline, you can't determine the callee's address. Some
+ (usually complex) code needs to run in the dynamic trampoline to figure out
+ the callee's address. This macro is usually called twice. First, when we
+ enter the trampoline (looks like a normal function call at that point). It
+ should return the PC of a point within the trampoline where the callee's
+ address is known. Second, when we hit the breakpoint, this routine returns
+ the callee's address. At that point, things proceed as per a step resume
+ breakpoint. */
+
+#ifndef DYNAMIC_TRAMPOLINE_NEXTPC
+#define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0
+#endif
+
/* For SVR4 shared libraries, each call goes through a small piece of
- trampoline code in the ".init" section. IN_SOLIB_TRAMPOLINE evaluates
+ trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
to nonzero if we are current stopped in one of these. */
-#ifndef IN_SOLIB_TRAMPOLINE
-#define IN_SOLIB_TRAMPOLINE(pc,name) 0
+
+#ifndef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0
+#endif
+
+/* In some shared library schemes, the return path from a shared library
+ call may need to go through a trampoline too. */
+
+#ifndef IN_SOLIB_RETURN_TRAMPOLINE
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc,name) 0
#endif
/* On some systems, the PC may be left pointing at an instruction that won't
static int trap_expected;
+#ifdef SOLIB_ADD
+/* Nonzero if we want to give control to the user when we're notified
+ of shared library events by the dynamic linker. */
+static int stop_on_solib_events;
+#endif
+
+#ifdef HP_OS_BUG
/* Nonzero if the next time we try to continue the inferior, it will
step one instruction and generate a spurious trace trap.
This is used to compensate for a bug in HP-UX. */
static int trap_expected_after_continue;
+#endif
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
static int stop_print_frame;
-#ifdef NO_SINGLE_STEP
-extern int one_stepped; /* From machine dependent code */
-extern void single_step (); /* Same. */
-#endif /* NO_SINGLE_STEP */
-
\f
/* Things to clean up if we QUIT out of resume (). */
/* ARGSUSED */
void
resume (step, sig)
int step;
- int sig;
+ enum target_signal sig;
{
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
+#ifdef CANNOT_STEP_BREAKPOINT
+ /* Most targets can step a breakpoint instruction, thus executing it
+ normally. But if this one cannot, just continue and we will hit
+ it anyway. */
+ if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ step = 0;
+#endif
+
#ifdef NO_SINGLE_STEP
if (step) {
single_step(sig); /* Do it the hard way, w/temp breakpoints */
DO_DEFERRED_STORES;
#endif
- target_resume (inferior_pid, step, sig);
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
+
+ target_resume (-1, step, sig);
discard_cleanups (old_cleanups);
}
void
proceed (addr, siggnal, step)
CORE_ADDR addr;
- int siggnal;
+ enum target_signal siggnal;
int step;
{
int oneproc = 0;
if (breakpoint_here_p (read_pc ()))
oneproc = 1;
+
+#ifdef STEP_SKIPS_DELAY
+ /* Check breakpoint_here_p first, because breakpoint_here_p is fast
+ (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
+ is slow (it needs to read memory from the target). */
+ if (breakpoint_here_p (read_pc () + 4)
+ && STEP_SKIPS_DELAY (read_pc ()))
+ oneproc = 1;
+#endif /* STEP_SKIPS_DELAY */
}
else
write_pc (addr);
+#ifdef PREPARE_TO_PROCEED
+ /* In a multi-threaded task we may select another thread and then continue.
+
+ In this case the thread that stopped at a breakpoint will immediately
+ cause another stop, if it is not stepped over first. On the other hand,
+ if (ADDR != -1) we only want to single step over the breakpoint if we did
+ switch to another thread.
+
+ If we are single stepping, don't do any of the above.
+ (Note that in the current implementation single stepping another
+ thread after a breakpoint and then continuing will cause the original
+ breakpoint to be hit again, but you can always continue, so it's not
+ a big deal.) */
+
+ if (! step && PREPARE_TO_PROCEED (1) && breakpoint_here_p (read_pc ()))
+ oneproc = 1;
+#endif /* PREPARE_TO_PROCEED */
+
+#ifdef HP_OS_BUG
if (trap_expected_after_continue)
{
/* If (step == 0), a trap will be automatically generated after
oneproc = 1;
trap_expected_after_continue = 0;
}
+#endif /* HP_OS_BUG */
if (oneproc)
/* We will get a trace trap after one instruction.
breakpoints_inserted = 1;
}
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- if (siggnal >= 0)
+ if (siggnal != TARGET_SIGNAL_DEFAULT)
stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (stop_signal < NSIG && !signal_program[stop_signal])
- stop_signal= 0;
+ else if (!signal_program[stop_signal])
+ stop_signal = TARGET_SIGNAL_0;
+
+ annotate_starting ();
+
+ /* Make sure that output from GDB appears before output from the
+ inferior. */
+ gdb_flush (gdb_stdout);
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), stop_signal);
to be preserved over calls to it and cleared when the inferior
is started. */
static CORE_ADDR prev_pc;
-static CORE_ADDR prev_sp;
static CORE_ADDR prev_func_start;
static char *prev_func_name;
void
start_remote ()
{
+ init_thread_list ();
init_wait_for_inferior ();
clear_proceed_status ();
stop_soon_quietly = 1;
{
/* These are meaningless until the first time through wait_for_inferior. */
prev_pc = 0;
- prev_sp = 0;
prev_func_start = 0;
prev_func_name = NULL;
+#ifdef HP_OS_BUG
trap_expected_after_continue = 0;
+#endif
breakpoints_inserted = 0;
- mark_breakpoints_out ();
- stop_signal = 0; /* Don't confuse first call to proceed(). */
+ breakpoint_init_inferior ();
+
+ /* Don't confuse first call to proceed(). */
+ stop_signal = TARGET_SIGNAL_0;
}
static void
wait_for_inferior ()
{
struct cleanup *old_cleanups;
- WAITTYPE w;
+ struct target_waitstatus w;
int another_trap;
- int random_signal;
- CORE_ADDR stop_sp = 0;
+ int random_signal = 0;
CORE_ADDR stop_func_start;
+ CORE_ADDR stop_func_end;
char *stop_func_name;
- CORE_ADDR prologue_pc = 0, tmp;
+#if 0
+ CORE_ADDR prologue_pc = 0;
+#endif
+ CORE_ADDR tmp;
struct symtab_and_line sal;
int remove_breakpoints_on_following_step = 0;
int current_line;
+ struct symtab *current_symtab;
int handling_longjmp = 0; /* FIXME */
struct breakpoint *step_resume_breakpoint = NULL;
+ struct breakpoint *through_sigtramp_breakpoint = NULL;
int pid;
+ int update_step_sp = 0;
old_cleanups = make_cleanup (delete_breakpoint_current_contents,
&step_resume_breakpoint);
+ make_cleanup (delete_breakpoint_current_contents,
+ &through_sigtramp_breakpoint);
sal = find_pc_line(prev_pc, 0);
current_line = sal.line;
+ current_symtab = sal.symtab;
+
+ /* Are we stepping? */
+#define CURRENTLY_STEPPING() \
+ ((through_sigtramp_breakpoint == NULL \
+ && !handling_longjmp \
+ && ((step_range_end && step_resume_breakpoint == NULL) \
+ || trap_expected)) \
+ || bpstat_should_step ())
while (1)
{
- /* Clean up saved state that will become invalid. */
- flush_cached_frames ();
+ /* We have to invalidate the registers BEFORE calling target_wait because
+ they can be loaded from the target while in target_wait. This makes
+ remote debugging a bit more efficient for those targets that provide
+ critical registers as part of their normal status mechanism. */
+
registers_changed ();
- pid = target_wait (&w);
+ if (target_wait_hook)
+ pid = target_wait_hook (-1, &w);
+ else
+ pid = target_wait (-1, &w);
-#ifdef SIGTRAP_STOP_AFTER_LOAD
+ /* Gross.
- /* Somebody called load(2), and it gave us a "trap signal after load".
- Ignore it gracefully. */
+ We goto this label from elsewhere in wait_for_inferior when we want
+ to continue the main loop without calling "wait" and trashing the
+ waitstatus contained in W. */
+ have_waited:
- SIGTRAP_STOP_AFTER_LOAD (w);
-#endif
+ flush_cached_frames ();
- /* See if the process still exists; clean up if it doesn't. */
- if (WIFEXITED (w))
+ /* If it's a new process, add it to the thread database */
+
+ if (pid != inferior_pid
+ && !in_thread_list (pid))
{
+ fprintf_unfiltered (gdb_stderr, "[New %s]\n", target_pid_to_str (pid));
+ add_thread (pid);
+
+ /* We may want to consider not doing a resume here in order to give
+ the user a chance to play with the new thread. It might be good
+ to make that a user-settable option. */
+
+ /* At this point, all threads are stopped (happens automatically in
+ either the OS or the native code). Therefore we need to continue
+ all threads in order to make progress. */
+
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+
+ switch (w.kind)
+ {
+ case TARGET_WAITKIND_LOADED:
+ /* Ignore it gracefully. */
+ if (breakpoints_inserted)
+ {
+ mark_breakpoints_out ();
+ insert_breakpoints ();
+ }
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ case TARGET_WAITKIND_SPURIOUS:
+ resume (0, TARGET_SIGNAL_0);
+ continue;
+
+ case TARGET_WAITKIND_EXITED:
target_terminal_ours (); /* Must do this before mourn anyway */
- if (WEXITSTATUS (w))
+ annotate_exited (w.value.integer);
+ if (w.value.integer)
printf_filtered ("\nProgram exited with code 0%o.\n",
- (unsigned int)WEXITSTATUS (w));
+ (unsigned int)w.value.integer);
else
- if (!batch_mode())
- printf_filtered ("\nProgram exited normally.\n");
- fflush (stdout);
+ printf_filtered ("\nProgram exited normally.\n");
+
+ /* Record the exit code in the convenience variable $_exitcode, so
+ that the user can inspect this again later. */
+ set_internalvar (lookup_internalvar ("_exitcode"),
+ value_from_longest (builtin_type_int,
+ (LONGEST) w.value.integer));
+ gdb_flush (gdb_stdout);
target_mourn_inferior ();
#ifdef NO_SINGLE_STEP
one_stepped = 0;
#endif
stop_print_frame = 0;
- break;
- }
- else if (!WIFSTOPPED (w))
- {
- char *signame;
-
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_SIGNALLED:
stop_print_frame = 0;
- stop_signal = WTERMSIG (w);
+ stop_signal = w.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
+ annotate_signalled ();
+
+ /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED
+ mean it is already dead? This has been here since GDB 2.8, so
+ perhaps it means rms didn't understand unix waitstatuses?
+ For the moment I'm just kludging around this in remote.c
+ rather than trying to change it here --kingdon, 5 Dec 1994. */
target_kill (); /* kill mourns as well */
-#ifdef PRINT_RANDOM_SIGNAL
- printf_filtered ("\nProgram terminated: ");
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
+
printf_filtered ("\nProgram terminated with signal ");
- signame = strsigno (stop_signal);
- if (signame == NULL)
- printf_filtered ("%d", stop_signal);
- else
- /* Do we need to print the number in addition to the name? */
- printf_filtered ("%s (%d)", signame, stop_signal);
- printf_filtered (", %s\n", safe_strsignal (stop_signal));
-#endif
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+
printf_filtered ("The program no longer exists.\n");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
#ifdef NO_SINGLE_STEP
one_stepped = 0;
#endif
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_STOPPED:
+ /* This is the only case in which we keep going; the above cases
+ end in a continue or goto. */
break;
}
-
+
+ stop_signal = w.value.sig;
+
+ stop_pc = read_pc_pid (pid);
+
+ /* See if a thread hit a thread-specific breakpoint that was meant for
+ another thread. If so, then step that thread past the breakpoint,
+ and continue it. */
+
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ {
+#ifdef NO_SINGLE_STEP
+ if (one_stepped)
+ random_signal = 0;
+ else
+#endif
+ if (breakpoints_inserted
+ && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
+ {
+ random_signal = 0;
+ if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK, pid))
+ {
+ /* Saw a breakpoint, but it was hit by the wrong thread. Just continue. */
+ write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, pid);
+
+ remove_breakpoints ();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+ /* FIXME: What if a signal arrives instead of the single-step
+ happening? */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+
+ /* We need to restart all the threads now. */
+ target_resume (-1, 0, TARGET_SIGNAL_0);
+ continue;
+ }
+ }
+ }
+ else
+ random_signal = 1;
+
+ /* See if something interesting happened to the non-current thread. If
+ so, then switch to that thread, and eventually give control back to
+ the user. */
+
if (pid != inferior_pid)
{
int printed = 0;
- if (!in_thread_list (pid))
- {
- fprintf (stderr, "[New %s]\n", target_pid_to_str (pid));
- add_thread (pid);
+ /* If it's a random signal for a non-current thread, notify user
+ if he's expressed an interest. */
- target_resume (pid, 0, 0);
- continue;
- }
- else
+ if (random_signal
+ && signal_print[stop_signal])
{
- stop_signal = WSTOPSIG (w);
+ printed = 1;
+ target_terminal_ours_for_output ();
+ printf_filtered ("\nProgram received signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+ gdb_flush (gdb_stdout);
+ }
- if (stop_signal >= NSIG || signal_print[stop_signal])
- {
- char *signame;
-
- printed = 1;
- target_terminal_ours_for_output ();
- printf_filtered ("\nProgram received signal ");
- signame = strsigno (stop_signal);
- if (signame == NULL)
- printf_filtered ("%d", stop_signal);
- else
- printf_filtered ("%s (%d)", signame, stop_signal);
- printf_filtered (", %s\n", safe_strsignal (stop_signal));
-
- fflush (stdout);
- }
+ /* If it's not SIGTRAP and not a signal we want to stop for, then
+ continue the thread. */
- if (stop_signal >= NSIG || signal_stop[stop_signal])
- {
- inferior_pid = pid;
- printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid));
-
- flush_cached_frames ();
- registers_changed ();
- trap_expected = 0;
- if (step_resume_breakpoint)
- {
- delete_breakpoint (step_resume_breakpoint);
- step_resume_breakpoint = NULL;
- }
- prev_pc = 0;
- prev_sp = 0;
- prev_func_name = NULL;
- step_range_start = 0;
- step_range_end = 0;
- step_frame_address = 0;
- handling_longjmp = 0;
- another_trap = 0;
- }
- else
- {
- if (printed)
- target_terminal_inferior ();
+ if (stop_signal != TARGET_SIGNAL_TRAP
+ && !signal_stop[stop_signal])
+ {
+ if (printed)
+ target_terminal_inferior ();
- /* Clear the signal if it should not be passed. */
- if (signal_program[stop_signal] == 0)
- stop_signal = 0;
+ /* Clear the signal if it should not be passed. */
+ if (signal_program[stop_signal] == 0)
+ stop_signal = TARGET_SIGNAL_0;
- target_resume (pid, 0, stop_signal);
- continue;
- }
+ target_resume (pid, 0, stop_signal);
+ continue;
}
+
+ /* It's a SIGTRAP or a signal we're interested in. Switch threads,
+ and fall into the rest of wait_for_inferior(). */
+
+ /* Save infrun state for the old thread. */
+ save_infrun_state (inferior_pid, prev_pc,
+ prev_func_start, prev_func_name,
+ trap_expected, step_resume_breakpoint,
+ through_sigtramp_breakpoint,
+ step_range_start, step_range_end,
+ step_frame_address, handling_longjmp,
+ another_trap);
+
+ inferior_pid = pid;
+
+ /* Load infrun state for the new thread. */
+ load_infrun_state (inferior_pid, &prev_pc,
+ &prev_func_start, &prev_func_name,
+ &trap_expected, &step_resume_breakpoint,
+ &through_sigtramp_breakpoint,
+ &step_range_start, &step_range_end,
+ &step_frame_address, &handling_longjmp,
+ &another_trap);
+ printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid));
+
+ flush_cached_frames ();
}
#ifdef NO_SINGLE_STEP
single_step (0); /* This actually cleans up the ss */
#endif /* NO_SINGLE_STEP */
-/* If PC is pointing at a nullified instruction, then step beyond it so that
- the user won't be confused when GDB appears to be ready to execute it. */
+ /* If PC is pointing at a nullified instruction, then step beyond
+ it so that the user won't be confused when GDB appears to be ready
+ to execute it. */
if (INSTRUCTION_NULLIFIED)
+ {
+ struct target_waitstatus tmpstatus;
+
+ registers_changed ();
+ target_resume (pid, 1, TARGET_SIGNAL_0);
+
+ /* We may have received a signal that we want to pass to
+ the inferior; therefore, we must not clobber the waitstatus
+ in W. So we call wait ourselves, then continue the loop
+ at the "have_waited" label. */
+ if (target_wait_hook)
+ target_wait_hook (pid, &tmpstatus);
+ else
+ target_wait (pid, &tmpstatus);
+
+
+ goto have_waited;
+ }
+
+#ifdef HAVE_STEPPABLE_WATCHPOINT
+ /* It may not be necessary to disable the watchpoint to stop over
+ it. For example, the PA can (with some kernel cooperation)
+ single step over a watchpoint without disabling the watchpoint. */
+ if (STOPPED_BY_WATCHPOINT (w))
{
resume (1, 0);
continue;
}
+#endif
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+ /* It is far more common to need to disable a watchpoint
+ to step the inferior over it. FIXME. What else might
+ a debug register or page protection watchpoint scheme need
+ here? */
+ if (STOPPED_BY_WATCHPOINT (w))
+ {
+/* At this point, we are stopped at an instruction which has attempted to write
+ to a piece of memory under control of a watchpoint. The instruction hasn't
+ actually executed yet. If we were to evaluate the watchpoint expression
+ now, we would get the old value, and therefore no change would seem to have
+ occurred.
+
+ In order to make watchpoints work `right', we really need to complete the
+ memory write, and then evaluate the watchpoint expression. The following
+ code does that by removing the watchpoint (actually, all watchpoints and
+ breakpoints), single-stepping the target, re-inserting watchpoints, and then
+ falling through to let normal single-step processing handle proceed. Since
+ this includes evaluating watchpoints, things will come to a stop in the
+ correct manner. */
+
+ write_pc (stop_pc - DECR_PC_AFTER_BREAK);
+
+ remove_breakpoints ();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+ /* FIXME-maybe: is this cleaner than setting a flag? Does it
+ handle things like signals arriving and other things happening
+ in combination correctly? */
+ goto have_waited;
+ }
+#endif
- stop_pc = read_pc ();
- set_current_frame ( create_new_frame (read_fp (), stop_pc));
+#ifdef HAVE_CONTINUABLE_WATCHPOINT
+ /* It may be possible to simply continue after a watchpoint. */
+ STOPPED_BY_WATCHPOINT (w);
+#endif
- stop_frame_address = FRAME_FP (get_current_frame ());
- stop_sp = read_sp ();
stop_func_start = 0;
stop_func_name = 0;
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
- (CORE_ADDR *)NULL);
+ &stop_func_end);
stop_func_start += FUNCTION_START_OFFSET;
another_trap = 0;
bpstat_clear (&stop_bpstat);
3) set random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
- stop_signal = WSTOPSIG (w);
-
/* First, distinguish signals caused by the debugger from signals
that have to do with the program's own actions.
Note that breakpoint insns may cause SIGTRAP or SIGILL
Here we detect when a SIGILL or SIGEMT is really a breakpoint
and change it to SIGTRAP. */
- if (stop_signal == SIGTRAP
+ if (stop_signal == TARGET_SIGNAL_TRAP
|| (breakpoints_inserted &&
- (stop_signal == SIGILL
-#ifdef SIGEMT
- || stop_signal == SIGEMT
-#endif
+ (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_EMT
))
|| stop_soon_quietly)
{
- if (stop_signal == SIGTRAP && stop_after_trap)
+ if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
stop_print_frame = 0;
break;
if just proceeded over a breakpoint.
However, if we are trying to proceed over a breakpoint
- and end up in sigtramp, then step_resume_breakpoint
+ and end up in sigtramp, then through_sigtramp_breakpoint
will be set and we should check whether we've hit the
step breakpoint. */
- if (stop_signal == SIGTRAP && trap_expected
- && step_resume_breakpoint == NULL)
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
+ && through_sigtramp_breakpoint == NULL)
bpstat_clear (&stop_bpstat);
else
{
/* See if there is a breakpoint at the current PC. */
+ stop_bpstat = bpstat_stop_status
+ (&stop_pc,
#if DECR_PC_AFTER_BREAK
- /* Notice the case of stepping through a jump
- that lands just after a breakpoint.
- Don't confuse that with hitting the breakpoint.
- What we check for is that 1) stepping is going on
- and 2) the pc before the last insn does not match
- the address of the breakpoint before the current pc. */
- if (prev_pc == stop_pc - DECR_PC_AFTER_BREAK
- || !step_range_end
- || step_resume_breakpoint != NULL
- || handling_longjmp /* FIXME */)
-#endif /* DECR_PC_AFTER_BREAK not zero */
- {
- stop_bpstat =
- bpstat_stop_status (&stop_pc, stop_frame_address);
- /* Following in case break condition called a
- function. */
- stop_print_frame = 1;
- }
+ /* Notice the case of stepping through a jump
+ that lands just after a breakpoint.
+ Don't confuse that with hitting the breakpoint.
+ What we check for is that 1) stepping is going on
+ and 2) the pc before the last insn does not match
+ the address of the breakpoint before the current pc. */
+ (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+ && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+ 0
+#endif /* DECR_PC_AFTER_BREAK zero */
+ );
+ /* Following in case break condition called a
+ function. */
+ stop_print_frame = 1;
}
- if (stop_signal == SIGTRAP)
+ if (stop_signal == TARGET_SIGNAL_TRAP)
random_signal
= !(bpstat_explains_signal (stop_bpstat)
|| trap_expected
- || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
|| (step_range_end && step_resume_breakpoint == NULL));
else
{
/* End of a stack dummy. Some systems (e.g. Sony
news) give another signal besides SIGTRAP,
so check here as well as above. */
- || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+ FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
);
if (!random_signal)
- stop_signal = SIGTRAP;
+ stop_signal = TARGET_SIGNAL_TRAP;
}
}
else
stopped_by_random_signal = 1;
- if (stop_signal >= NSIG
- || signal_print[stop_signal])
+ if (signal_print[stop_signal])
{
- char *signame;
printed = 1;
target_terminal_ours_for_output ();
-#ifdef PRINT_RANDOM_SIGNAL
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
+ annotate_signal ();
printf_filtered ("\nProgram received signal ");
- signame = strsigno (stop_signal);
- if (signame == NULL)
- printf_filtered ("%d", stop_signal);
- else
- /* Do we need to print the number as well as the name? */
- printf_filtered ("%s (%d)", signame, stop_signal);
- printf_filtered (", %s\n", safe_strsignal (stop_signal));
-#endif /* PRINT_RANDOM_SIGNAL */
- fflush (stdout);
+ annotate_signal_name ();
+ printf_filtered ("%s", target_signal_to_name (stop_signal));
+ annotate_signal_name_end ();
+ printf_filtered (", ");
+ annotate_signal_string ();
+ printf_filtered ("%s", target_signal_to_string (stop_signal));
+ annotate_signal_string_end ();
+ printf_filtered (".\n");
+ gdb_flush (gdb_stdout);
}
- if (stop_signal >= NSIG
- || signal_stop[stop_signal])
+ if (signal_stop[stop_signal])
break;
/* If not going to stop, give terminal back
if we took it away. */
/* Clear the signal if it should not be passed. */
if (signal_program[stop_signal] == 0)
- stop_signal = 0;
+ stop_signal = TARGET_SIGNAL_0;
/* I'm not sure whether this needs to be check_sigtramp2 or
whether it could/should be keep_going. */
what = bpstat_what (stop_bpstat);
+ if (what.call_dummy)
+ {
+ stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+ trap_expected_after_continue = 1;
+#endif
+ }
+
switch (what.main_action)
{
case BPSTAT_WHAT_SET_LONGJMP_RESUME:
{
delete_breakpoint (step_resume_breakpoint);
step_resume_breakpoint = NULL;
- what.step_resume = 0;
+ }
+ /* Not sure whether we need to blow this away too, but probably
+ it is like the step-resume breakpoint. */
+ if (through_sigtramp_breakpoint != NULL)
+ {
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
}
#if 0
#if 0
/* FIXME - Need to implement nested temporary breakpoints */
if (step_over_calls
- && (stop_frame_address
+ && (FRAME_FP (get_current_frame ())
INNER_THAN step_frame_address))
{
another_trap = 1;
case BPSTAT_WHAT_STOP_NOISY:
stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpoint via the
- cleanup chain, so no need to worry about it here. */
+
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
+
goto stop_stepping;
case BPSTAT_WHAT_STOP_SILENT:
stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoint via the
- cleanup chain, so no need to worry about it here. */
- goto stop_stepping;
- case BPSTAT_WHAT_KEEP_CHECKING:
- break;
- }
+ /* We are about to nuke the step_resume_breakpoint and
+ through_sigtramp_breakpoint via the cleanup chain, so
+ no need to worry about it here. */
- if (what.step_resume)
- {
+ goto stop_stepping;
+
+ case BPSTAT_WHAT_STEP_RESUME:
delete_breakpoint (step_resume_breakpoint);
step_resume_breakpoint = NULL;
+ break;
+
+ case BPSTAT_WHAT_THROUGH_SIGTRAMP:
+ if (through_sigtramp_breakpoint)
+ delete_breakpoint (through_sigtramp_breakpoint);
+ through_sigtramp_breakpoint = NULL;
/* If were waiting for a trap, hitting the step_resume_break
doesn't count as getting it. */
if (trap_expected)
another_trap = 1;
+ break;
+
+ case BPSTAT_WHAT_CHECK_SHLIBS:
+#ifdef SOLIB_ADD
+ {
+ extern int auto_solib_add;
+
+ /* Remove breakpoints, we eventually want to step over the
+ shlib event breakpoint, and SOLIB_ADD might adjust
+ breakpoint addresses via breakpoint_re_set. */
+ if (breakpoints_inserted)
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+
+ /* Check for any newly added shared libraries if we're
+ supposed to be adding them automatically. */
+ if (auto_solib_add)
+ {
+ /* Switch terminal for any messages produced by
+ breakpoint_re_set. */
+ target_terminal_ours_for_output ();
+ SOLIB_ADD (NULL, 0, NULL);
+ re_enable_breakpoints_in_shlibs ();
+ target_terminal_inferior ();
+ }
+
+ /* If requested, stop when the dynamic linker notifies
+ gdb of events. This allows the user to get control
+ and place breakpoints in initializer routines for
+ dynamically loaded objects (among other things). */
+ if (stop_on_solib_events)
+ {
+ stop_print_frame = 0;
+ goto stop_stepping;
+ }
+ else
+ {
+ /* We want to step over this breakpoint, then keep going. */
+ another_trap = 1;
+ break;
+ }
+ }
+#endif
+ break;
+
+ case BPSTAT_WHAT_LAST:
+ /* Not a real code, but listed here to shut up gcc -Wall. */
+
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
}
}
test for stepping. But, if not stepping,
do not stop. */
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+ /* This is the old way of detecting the end of the stack dummy.
+ An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets
+ handled above. As soon as we can test it on all of them, all
+ architectures should define it. */
+
/* If this is the breakpoint at the end of a stack dummy,
just stop silently, unless the user was doing an si/ni, in which
case she'd better know what she's doing. */
- if (PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
+ if (PC_IN_CALL_DUMMY (stop_pc, read_sp (), FRAME_FP (get_current_frame ()))
&& !step_range_end)
{
stop_print_frame = 0;
#endif
break;
}
-
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
+
if (step_resume_breakpoint)
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
- /* I suspect this could/should be keep_going, because if the
- check_sigtramp2 check succeeds, then it will put in another
- step_resume_breakpoint, and we aren't (yet) prepared to nest
- them. */
+ /* I'm not sure whether this needs to be check_sigtramp2 or
+ whether it could/should be keep_going. */
goto check_sigtramp2;
if (step_range_end == 0)
/* If stepping through a line, keep going if still within it. */
if (stop_pc >= step_range_start
&& stop_pc < step_range_end
+#if 0
+/* I haven't a clue what might trigger this clause, and it seems wrong anyway,
+ so I've disabled it until someone complains. -Stu 10/24/95 */
+
/* The step range might include the start of the
function, so if we are at the start of the
step range and either the stack or frame pointers
just changed, we've stepped outside */
&& !(stop_pc == step_range_start
- && stop_frame_address
- && (stop_sp INNER_THAN prev_sp
- || stop_frame_address != step_frame_address)))
+ && FRAME_FP (get_current_frame ())
+ && (read_sp () INNER_THAN step_sp
+ || FRAME_FP (get_current_frame ()) != step_frame_address))
+#endif
+)
{
/* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
So definately need to check for sigtramp here. */
goto check_sigtramp2;
}
- /* We stepped out of the stepping range. See if that was due
- to a subroutine call that we should proceed to the end of. */
+ /* We stepped out of the stepping range. */
+
+ /* We can't update step_sp every time through the loop, because
+ reading the stack pointer would slow down stepping too much.
+ But we can update it every time we leave the step range. */
+ update_step_sp = 1;
/* Did we just take a signal? */
if (IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && read_sp () INNER_THAN step_sp)
{
+ /* We've just taken a signal; go until we are back to
+ the point where we took it and one more. */
+
/* This code is needed at least in the following case:
The user types "next" and then a signal arrives (before
the "next" is done). */
- /* We've just taken a signal; go until we are back to
- the point where we took it and one more. */
+
+ /* Note that if we are stopped at a breakpoint, then we need
+ the step_resume breakpoint to override any breakpoints at
+ the same location, so that we will still step over the
+ breakpoint even though the signal happened. */
+
{
struct symtab_and_line sr_sal;
sr_sal.pc = prev_pc;
sr_sal.symtab = NULL;
sr_sal.line = 0;
+ /* We could probably be setting the frame to
+ step_frame_address; I don't think anyone thought to try it. */
step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, get_current_frame (),
- bp_step_resume);
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
}
goto keep_going;
}
+#if 0
+ /* I disabled this test because it was too complicated and slow. The
+ SKIP_PROLOGUE was especially slow, because it caused unnecessary
+ prologue examination on various architectures. The code in the #else
+ clause has been tested on the Sparc, Mips, PA, and Power
+ architectures, so it's pretty likely to be correct. -Stu 10/24/95 */
+
+ /* See if we left the step range due to a subroutine call that
+ we should proceed to the end of. */
+
if (stop_func_start)
{
+ struct symtab *s;
+
/* Do this after the IN_SIGTRAMP check; it might give
an error. */
prologue_pc = stop_func_start;
- SKIP_PROLOGUE (prologue_pc);
+
+ /* Don't skip the prologue if this is assembly source */
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (prologue_pc);
}
- /* ==> See comments at top of file on this algorithm. <==*/
+ if (!(step_sp INNER_THAN read_sp ()) /* don't mistake (sig)return as a call */
+ && (/* Might be a non-recursive call. If the symbols are missing
+ enough that stop_func_start == prev_func_start even though
+ they are really two functions, we will treat some calls as
+ jumps. */
+ stop_func_start != prev_func_start
- if ((stop_pc == stop_func_start
- || IN_SOLIB_TRAMPOLINE (stop_pc, stop_func_name))
- && (stop_func_start != prev_func_start
+ /* Might be a recursive call if either we have a prologue
+ or the call instruction itself saves the PC on the stack. */
|| prologue_pc != stop_func_start
- || stop_sp != prev_sp))
+ || read_sp () != step_sp)
+ && (/* PC is completely out of bounds of any known objfiles. Treat
+ like a subroutine call. */
+ ! stop_func_start
+
+ /* If we do a call, we will be at the start of a function... */
+ || stop_pc == stop_func_start
+
+ /* ...except on the Alpha with -O (and also Irix 5 and
+ perhaps others), in which we might call the address
+ after the load of gp. Since prologues don't contain
+ calls, we can't return to within one, and we don't
+ jump back into them, so this check is OK. */
+
+ || stop_pc < prologue_pc
+
+ /* ...and if it is a leaf function, the prologue might
+ consist of gp loading only, so the call transfers to
+ the first instruction after the prologue. */
+ || (stop_pc == prologue_pc
+
+ /* Distinguish this from the case where we jump back
+ to the first instruction after the prologue,
+ within a function. */
+ && stop_func_start != prev_func_start)
+
+ /* If we end up in certain places, it means we did a subroutine
+ call. I'm not completely sure this is necessary now that we
+ have the above checks with stop_func_start (and now that
+ find_pc_partial_function is pickier). */
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+
+ /* If none of the above apply, it is a jump within a function,
+ or a return from a subroutine. The other case is longjmp,
+ which can no longer happen here as long as the
+ handling_longjmp stuff is working. */
+ ))
+#else
+ /* This test is a much more streamlined, (but hopefully correct)
+ replacement for the code above. It's been tested on the Sparc,
+ Mips, PA, and Power architectures with good results. */
+
+ if (stop_pc == stop_func_start /* Quick test */
+ || in_prologue (stop_pc, stop_func_start)
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+ || stop_func_start == 0)
+#endif
+
{
/* It's a subroutine call. */
tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
if (tmp != 0)
stop_func_start = tmp;
+ else
+ {
+ tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc);
+ if (tmp)
+ {
+ struct symtab_and_line xxx;
+
+ xxx.pc = tmp;
+ xxx.symtab = NULL;
+ xxx.line = 0;
+ step_resume_breakpoint =
+ set_momentary_breakpoint (xxx, NULL, bp_step_resume);
+ insert_breakpoints ();
+ goto keep_going;
+ }
+ }
/* If we have line number information for the function we
are thinking of stepping into, step into it.
step_resume_breakpoint =
set_momentary_breakpoint (sr_sal, get_current_frame (),
bp_step_resume);
+ step_resume_breakpoint->frame = step_frame_address;
if (breakpoints_inserted)
insert_breakpoints ();
}
step_into_function:
/* Subroutine call with source code we should not step over.
Do step to the first line of code in it. */
- SKIP_PROLOGUE (stop_func_start);
+ {
+ struct symtab *s;
+
+ s = find_pc_symtab (stop_pc);
+ if (s && s->language != language_asm)
+ SKIP_PROLOGUE (stop_func_start);
+ }
sal = find_pc_line (stop_func_start, 0);
/* Use the step_resume_break to step until
the end of the prologue, even if that involves jumps
(as it seems to on the vax under 4.2). */
/* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
+ continue to the end of that source line (if it is still
+ within the function). Otherwise, just go to end of prologue. */
#ifdef PROLOGUE_FIRSTLINE_OVERLAP
/* no, don't either. It skips any code that's
legitimately on the first line. */
#else
- if (sal.end && sal.pc != stop_func_start)
+ if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end)
stop_func_start = sal.end;
#endif
since on some machines the prologue
is where the new fp value is established. */
step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, (CORE_ADDR)0,
- bp_step_resume);
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
goto keep_going;
}
- /* We've wandered out of the step range (but haven't done a
- subroutine call or return). (Is that true? I think we get
- here if we did a return and maybe a longjmp). */
+ /* We've wandered out of the step range. */
sal = find_pc_line(stop_pc, 0);
break;
}
+ /* If we're in the return path from a shared library trampoline,
+ we want to proceed through the trampoline when stepping. */
+ if (IN_SOLIB_RETURN_TRAMPOLINE(stop_pc, stop_func_name))
+ {
+ CORE_ADDR tmp;
+
+ /* Determine where this trampoline returns. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+
+ /* Only proceed through if we know where it's going. */
+ if (tmp)
+ {
+ /* And put the step-breakpoint there and go until there. */
+ struct symtab_and_line sr_sal;
+
+ sr_sal.pc = tmp;
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* Restart without fiddling with the step ranges or
+ other state. */
+ goto keep_going;
+ }
+ }
+
if (sal.line == 0)
{
/* We have no line number information. That means to stop
break;
}
- if (stop_pc == sal.pc && current_line != sal.line)
+ if (stop_pc == sal.pc
+ && (current_line != sal.line || current_symtab != sal.symtab))
{
/* We are at the start of a different line. So stop. Note that
we don't stop if we step into the middle of a different line.
(We might not be in the original line, but if we entered a
new line in mid-statement, we continue stepping. This makes
things like for(;;) statements work better.) */
+
+ if (stop_func_end && sal.end >= stop_func_end)
+ {
+ /* If this is the last line of the function, don't keep stepping
+ (it would probably step us out of the function).
+ This is particularly necessary for a one-line function,
+ in which after skipping the prologue we better stop even though
+ we will be in mid-line. */
+ stop_step = 1;
+ break;
+ }
step_range_start = sal.pc;
step_range_end = sal.end;
+ step_frame_address = FRAME_FP (get_current_frame ());
goto keep_going;
check_sigtramp2:
if (trap_expected
&& IN_SIGTRAMP (stop_pc, stop_func_name)
- && !IN_SIGTRAMP (prev_pc, prev_func_name))
+ && !IN_SIGTRAMP (prev_pc, prev_func_name)
+ && read_sp () INNER_THAN step_sp)
{
/* What has happened here is that we have just stepped the inferior
with a signal (because it is a signal which shouldn't make
sr_sal.pc = prev_pc;
sr_sal.symtab = NULL;
sr_sal.line = 0;
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, get_current_frame (),
- bp_step_resume);
+ /* We perhaps could set the frame if we kept track of what
+ the frame corresponding to prev_pc was. But we don't,
+ so don't. */
+ through_sigtramp_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
if (breakpoints_inserted)
insert_breakpoints ();
been at the start of a
function. */
prev_func_name = stop_func_name;
- prev_sp = stop_sp;
+
+ if (update_step_sp)
+ step_sp = read_sp ();
+ update_step_sp = 0;
/* If we did not do break;, it means we should keep
running the inferior and not return to debugger. */
- if (trap_expected && stop_signal != SIGTRAP)
+ if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd have done a break above) and we
haven't yet gotten our trap. Simply continue. */
- resume ((step_range_end && step_resume_breakpoint == NULL)
- || (trap_expected && step_resume_breakpoint == NULL)
- || bpstat_should_step (),
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
else
{
to one-proceed past a breakpoint. */
/* If we've just finished a special step resume and we don't
want to hit a breakpoint, pull em out. */
- if (step_resume_breakpoint == NULL &&
- remove_breakpoints_on_following_step)
+ if (step_resume_breakpoint == NULL
+ && through_sigtramp_breakpoint == NULL
+ && remove_breakpoints_on_following_step)
{
remove_breakpoints_on_following_step = 0;
remove_breakpoints ();
breakpoints_inserted = 0;
}
else if (!breakpoints_inserted &&
- (step_resume_breakpoint != NULL || !another_trap))
+ (through_sigtramp_breakpoint != NULL || !another_trap))
{
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
trap_expected = another_trap;
- if (stop_signal == SIGTRAP)
- stop_signal = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ stop_signal = TARGET_SIGNAL_0;
#ifdef SHIFT_INST_REGS
/* I'm not sure when this following segment applies. I do know, now,
that we shouldn't rewrite the regs when we were stopped by a
random signal from the inferior process. */
+ /* FIXME: Shouldn't this be based on the valid bit of the SXIP?
+ (this is only used on the 88k). */
if (!bpstat_explains_signal (stop_bpstat)
- && (stop_signal != SIGCLD)
+ && (stop_signal != TARGET_SIGNAL_CHLD)
&& !stopped_by_random_signal)
- {
- CORE_ADDR pc_contents = read_register (PC_REGNUM);
- CORE_ADDR npc_contents = read_register (NPC_REGNUM);
- if (pc_contents != npc_contents)
- {
- write_register (NNPC_REGNUM, npc_contents);
- write_register (NPC_REGNUM, pc_contents);
- }
- }
+ SHIFT_INST_REGS();
#endif /* SHIFT_INST_REGS */
- resume ((step_resume_breakpoint == NULL
- && !handling_longjmp
- && (step_range_end
- || trap_expected))
- || bpstat_should_step (),
- stop_signal);
+ resume (CURRENTLY_STEPPING (), stop_signal);
}
}
prev_pc = read_pc ();
prev_func_start = stop_func_start;
prev_func_name = stop_func_name;
- prev_sp = stop_sp;
}
do_cleanups (old_cleanups);
}
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
DECR_PC_AFTER_BREAK */
- if (target_has_execution)
+ if (target_has_execution && get_current_frame())
(get_current_frame ())->pc = read_pc ();
if (breakpoints_failed)
disable_current_display ();
if (step_multi && stop_step)
- return;
+ goto done;
target_terminal_ours ();
+ if (stop_bpstat
+ && stop_bpstat->breakpoint_at
+ && stop_bpstat->breakpoint_at->type == bp_shlib_event)
+ printf_filtered ("Stopped due to shared library event\n");
+
/* Look up the hook_stop and run it if it exists. */
if (stop_command->hook)
}
if (!target_has_stack)
- return;
+ goto done;
/* Select innermost stack frame except on return from a stack dummy routine,
or if the program has exited. Print it without a level number if
source_only = bpstat_print (stop_bpstat);
source_only = source_only ||
( stop_step
- && step_frame_address == stop_frame_address
+ && step_frame_address == FRAME_FP (get_current_frame ())
&& step_start_function == find_pc_function (stop_pc));
print_stack_frame (selected_frame, -1, source_only? -1: 1);
POP_FRAME ends with a setting of the current frame, so we
can use that next. */
POP_FRAME;
+ /* Set stop_pc to what it was before we called the function. Can't rely
+ on restore_inferior_status because that only gets called if we don't
+ stop in the called function. */
+ stop_pc = read_pc();
select_frame (get_current_frame (), 0);
}
+ done:
+ annotate_stopped ();
}
static int
int signal_stop_state (signo)
int signo;
{
- return ((signo >= 0 && signo < NSIG) ? signal_stop[signo] : 0);
+ return signal_stop[signo];
}
int signal_print_state (signo)
int signo;
{
- return ((signo >= 0 && signo < NSIG) ? signal_print[signo] : 0);
+ return signal_print[signo];
}
int signal_pass_state (signo)
int signo;
{
- return ((signo >= 0 && signo < NSIG) ? signal_program[signo] : 0);
+ return signal_program[signo];
}
static void
sig_print_header ()
{
- printf_filtered ("Signal\t\tStop\tPrint\tPass to program\tDescription\n");
+ printf_filtered ("\
+Signal Stop\tPrint\tPass to program\tDescription\n");
}
static void
-sig_print_info (number)
- int number;
+sig_print_info (oursig)
+ enum target_signal oursig;
{
- char *name;
-
- if ((name = strsigno (number)) == NULL)
- printf_filtered ("%d\t\t", number);
- else
- printf_filtered ("%s (%d)\t", name, number);
- printf_filtered ("%s\t", signal_stop[number] ? "Yes" : "No");
- printf_filtered ("%s\t", signal_print[number] ? "Yes" : "No");
- printf_filtered ("%s\t\t", signal_program[number] ? "Yes" : "No");
- printf_filtered ("%s\n", safe_strsignal (number));
+ char *name = target_signal_to_name (oursig);
+ printf_filtered ("%s", name);
+ printf_filtered ("%*.*s ", 13 - strlen (name), 13 - strlen (name),
+ " ");
+ printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\n", target_signal_to_string (oursig));
}
/* Specify how various signals in the inferior should be handled. */
char **argv;
int digits, wordlen;
int sigfirst, signum, siglast;
+ enum target_signal oursig;
int allsigs;
int nsigs;
unsigned char *sigs;
/* Allocate and zero an array of flags for which signals to handle. */
- nsigs = signo_max () + 1;
+ nsigs = (int)TARGET_SIGNAL_LAST;
sigs = (unsigned char *) alloca (nsigs);
memset (sigs, 0, nsigs);
}
old_chain = make_cleanup (freeargv, (char *) argv);
- /* Walk through the args, looking for signal numbers, signal names, and
+ /* Walk through the args, looking for signal oursigs, signal names, and
actions. Signal numbers and signal names may be interspersed with
actions, with the actions being performed for all signals cumulatively
specified. Signal ranges can be specified as <LOW>-<HIGH>. */
}
else if (digits > 0)
{
- sigfirst = siglast = atoi (*argv);
+ /* It is numeric. The numeric signal refers to our own internal
+ signal numbering from target.h, not to host/target signal number.
+ This is a feature; users really should be using symbolic names
+ anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
+ will work right anyway. */
+
+ sigfirst = siglast = (int) target_signal_from_command (atoi (*argv));
if ((*argv)[digits] == '-')
{
- siglast = atoi ((*argv) + digits + 1);
+ siglast =
+ (int) target_signal_from_command (atoi ((*argv) + digits + 1));
}
if (sigfirst > siglast)
{
sigfirst = siglast;
siglast = signum;
}
- if (sigfirst < 0 || sigfirst >= nsigs)
+ }
+ else
+ {
+ oursig = target_signal_from_name (*argv);
+ if (oursig != TARGET_SIGNAL_UNKNOWN)
{
- error ("Signal %d not in range 0-%d", sigfirst, nsigs - 1);
+ sigfirst = siglast = (int)oursig;
}
- if (siglast < 0 || siglast >= nsigs)
+ else
{
- error ("Signal %d not in range 0-%d", siglast, nsigs - 1);
+ /* Not a number and not a recognized flag word => complain. */
+ error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
}
}
- else if ((signum = strtosigno (*argv)) != 0)
- {
- sigfirst = siglast = signum;
- }
- else
- {
- /* Not a number and not a recognized flag word => complain. */
- error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
- }
/* If any signal numbers or symbol names were found, set flags for
which signals to apply actions to. */
for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
- switch (signum)
+ switch ((enum target_signal)signum)
{
- case SIGTRAP:
- case SIGINT:
+ case TARGET_SIGNAL_TRAP:
+ case TARGET_SIGNAL_INT:
if (!allsigs && !sigs[signum])
{
- if (query ("%s is used by the debugger.\nAre you sure you want to change it? ", strsigno (signum)))
+ if (query ("%s is used by the debugger.\n\
+Are you sure you want to change it? ",
+ target_signal_to_name
+ ((enum target_signal)signum)))
{
sigs[signum] = 1;
}
else
{
- printf ("Not confirmed, unchanged.\n");
- fflush (stdout);
+ printf_unfiltered ("Not confirmed, unchanged.\n");
+ gdb_flush (gdb_stdout);
}
}
break;
+ case TARGET_SIGNAL_0:
+ case TARGET_SIGNAL_DEFAULT:
+ case TARGET_SIGNAL_UNKNOWN:
+ /* Make sure that "all" doesn't print these. */
+ break;
default:
sigs[signum] = 1;
break;
argv++;
}
- target_notice_signals();
+ target_notice_signals(inferior_pid);
if (from_tty)
{
do_cleanups (old_chain);
}
-/* Print current contents of the tables set by the handle command. */
+/* Print current contents of the tables set by the handle command.
+ It is possible we should just be printing signals actually used
+ by the current target (but for things to work right when switching
+ targets, all signals should be in the signal tables). */
static void
signals_info (signum_exp, from_tty)
char *signum_exp;
int from_tty;
{
- register int i;
+ enum target_signal oursig;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
- i = strtosigno (signum_exp);
- if (i == 0)
+ oursig = target_signal_from_name (signum_exp);
+ if (oursig == TARGET_SIGNAL_UNKNOWN)
{
- /* Nope, maybe it's an address which evaluates to a signal
- number. */
- i = parse_and_eval_address (signum_exp);
- if (i >= NSIG || i < 0)
- error ("Signal number out of bounds.");
+ /* No, try numeric. */
+ oursig =
+ target_signal_from_command (parse_and_eval_address (signum_exp));
}
- sig_print_info (i);
+ sig_print_info (oursig);
return;
}
printf_filtered ("\n");
- for (i = 0; i < NSIG; i++)
+ /* These ugly casts brought to you by the native VAX compiler. */
+ for (oursig = TARGET_SIGNAL_FIRST;
+ (int)oursig < (int)TARGET_SIGNAL_LAST;
+ oursig = (enum target_signal)((int)oursig + 1))
{
QUIT;
- sig_print_info (i);
+ if (oursig != TARGET_SIGNAL_UNKNOWN
+ && oursig != TARGET_SIGNAL_DEFAULT
+ && oursig != TARGET_SIGNAL_0)
+ sig_print_info (oursig);
}
printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
{
inf_status->stop_signal = stop_signal;
inf_status->stop_pc = stop_pc;
- inf_status->stop_frame_address = stop_frame_address;
inf_status->stop_step = stop_step;
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
}
struct restore_selected_frame_args {
- FRAME_ADDR frame_address;
+ CORE_ADDR frame_address;
int level;
};
restore_selected_frame_args * (declared as char * for catch_errors)
telling us what frame to restore. Returns 1 for success, or 0 for
failure. An error message will have been printed on error. */
+
static int
restore_selected_frame (args)
char *args;
{
struct restore_selected_frame_args *fr =
(struct restore_selected_frame_args *) args;
- FRAME fid;
+ struct frame_info *frame;
int level = fr->level;
- fid = find_relative_frame (get_current_frame (), &level);
+ frame = find_relative_frame (get_current_frame (), &level);
/* If inf_status->selected_frame_address is NULL, there was no
previously selected frame. */
- if (fid == 0 ||
- FRAME_FP (fid) != fr->frame_address ||
+ if (frame == NULL ||
+ FRAME_FP (frame) != fr->frame_address ||
level != 0)
{
warning ("Unable to restore previously selected frame.\n");
return 0;
}
- select_frame (fid, fr->level);
+ select_frame (frame, fr->level);
return(1);
}
{
stop_signal = inf_status->stop_signal;
stop_pc = inf_status->stop_pc;
- stop_frame_address = inf_status->stop_frame_address;
stop_step = inf_status->stop_step;
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
-Specify a signal number as argument to print info on that signal only.");
+Specify a signal as argument to print info on that signal only.");
add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command,
- "Specify how to handle a signal.\n\
-Args are signal numbers and actions to apply to those signals.\n\
-Signal numbers may be numeric (ex. 11) or symbolic (ex. SIGSEGV).\n\
-Numeric ranges may be specified with the form LOW-HIGH (ex. 14-21).\n\
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n\
-Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.");
+Pass and Stop may be combined.", NULL));
stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
"There is no `stop' command, but you can set a hook on `stop'.\n\
This allows you to set a list of commands to be run each time execution\n\
of the program stops.", &cmdlist);
- numsigs = signo_max () + 1;
- signal_stop = (unsigned char *)
- xmalloc (sizeof (signal_stop[0]) * numsigs);
- signal_print = (unsigned char *)
- xmalloc (sizeof (signal_print[0]) * numsigs);
+ numsigs = (int)TARGET_SIGNAL_LAST;
+ signal_stop = (unsigned char *)
+ xmalloc (sizeof (signal_stop[0]) * numsigs);
+ signal_print = (unsigned char *)
+ xmalloc (sizeof (signal_print[0]) * numsigs);
signal_program = (unsigned char *)
- xmalloc (sizeof (signal_program[0]) * numsigs);
+ xmalloc (sizeof (signal_program[0]) * numsigs);
for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
- signal_program[SIGTRAP] = 0;
- signal_program[SIGINT] = 0;
+ signal_program[TARGET_SIGNAL_TRAP] = 0;
+ signal_program[TARGET_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
-#ifdef SIGALRM
- signal_stop[SIGALRM] = 0;
- signal_print[SIGALRM] = 0;
-#endif /* SIGALRM */
-#ifdef SIGVTALRM
- signal_stop[SIGVTALRM] = 0;
- signal_print[SIGVTALRM] = 0;
-#endif /* SIGVTALRM */
-#ifdef SIGPROF
- signal_stop[SIGPROF] = 0;
- signal_print[SIGPROF] = 0;
-#endif /* SIGPROF */
-#ifdef SIGCHLD
- signal_stop[SIGCHLD] = 0;
- signal_print[SIGCHLD] = 0;
-#endif /* SIGCHLD */
-#ifdef SIGCLD
- signal_stop[SIGCLD] = 0;
- signal_print[SIGCLD] = 0;
-#endif /* SIGCLD */
-#ifdef SIGIO
- signal_stop[SIGIO] = 0;
- signal_print[SIGIO] = 0;
-#endif /* SIGIO */
-#ifdef SIGURG
- signal_stop[SIGURG] = 0;
- signal_print[SIGURG] = 0;
-#endif /* SIGURG */
+ signal_stop[TARGET_SIGNAL_ALRM] = 0;
+ signal_print[TARGET_SIGNAL_ALRM] = 0;
+ signal_stop[TARGET_SIGNAL_VTALRM] = 0;
+ signal_print[TARGET_SIGNAL_VTALRM] = 0;
+ signal_stop[TARGET_SIGNAL_PROF] = 0;
+ signal_print[TARGET_SIGNAL_PROF] = 0;
+ signal_stop[TARGET_SIGNAL_CHLD] = 0;
+ signal_print[TARGET_SIGNAL_CHLD] = 0;
+ signal_stop[TARGET_SIGNAL_IO] = 0;
+ signal_print[TARGET_SIGNAL_IO] = 0;
+ signal_stop[TARGET_SIGNAL_POLL] = 0;
+ signal_print[TARGET_SIGNAL_POLL] = 0;
+ signal_stop[TARGET_SIGNAL_URG] = 0;
+ signal_print[TARGET_SIGNAL_URG] = 0;
+
+#ifdef SOLIB_ADD
+ add_show_from_set
+ (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
+ (char *) &stop_on_solib_events,
+ "Set stopping for shared library events.\n\
+If nonzero, gdb will give control to the user when the dynamic linker\n\
+notifies gdb of shared library events. The most common event of interest\n\
+to the user would be loading/unloading of a new library.\n",
+ &setlist),
+ &showlist);
+#endif
}