static ptid_t previous_inferior_ptid;
-/* Default behavior is to detach newly forked processes (legacy). */
-int detach_fork = 1;
+/* If set (default for legacy reasons), when following a fork, GDB
+ will detach from one of the fork branches, child or parent.
+ Exactly which branch is detached depends on 'set follow-fork-mode'
+ setting. */
+
+static int detach_fork = 1;
int debug_displaced = 0;
static void
"this platform."));
}
+/* User interface for non-stop mode. */
-/* If the program uses ELF-style shared libraries, then calls to
- functions in shared libraries go through stubs, which live in a
- table called the PLT (Procedure Linkage Table). The first time the
- function is called, the stub sends control to the dynamic linker,
- which looks up the function's real address, patches the stub so
- that future calls will go directly to the function, and then passes
- control to the function.
-
- If we are stepping at the source level, we don't want to see any of
- this --- we just want to skip over the stub and the dynamic linker.
- The simple approach is to single-step until control leaves the
- dynamic linker.
-
- However, on some systems (e.g., Red Hat's 5.2 distribution) the
- dynamic linker calls functions in the shared C library, so you
- can't tell from the PC alone whether the dynamic linker is still
- running. In this case, we use a step-resume breakpoint to get us
- past the dynamic linker, as if we were using "next" to step over a
- function call.
-
- in_solib_dynsym_resolve_code() says whether we're in the dynamic
- linker code or not. Normally, this means we single-step. However,
- if SKIP_SOLIB_RESOLVER then returns non-zero, then its value is an
- address where we can place a step-resume breakpoint to get past the
- linker's symbol resolution function.
-
- in_solib_dynsym_resolve_code() can generally be implemented in a
- pretty portable way, by comparing the PC against the address ranges
- of the dynamic linker's sections.
-
- SKIP_SOLIB_RESOLVER is generally going to be system-specific, since
- it depends on internal details of the dynamic linker. It's usually
- not too hard to figure out where to put a breakpoint, but it
- certainly isn't portable. SKIP_SOLIB_RESOLVER should do plenty of
- sanity checking. If it can't figure things out, returning zero and
- getting the (possibly confusing) stepping behavior is better than
- signalling an error, which will obscure the change in the
- inferior's state. */
-
-/* This function returns TRUE if pc is the address of an instruction
- that lies within the dynamic linker (such as the event hook, or the
- dld itself).
-
- This function must be used only when a dynamic linker event has
- been caught, and the inferior is being stepped out of the hook, or
- undefined results are guaranteed. */
-
-#ifndef SOLIB_IN_DYNAMIC_LINKER
-#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
-#endif
+int non_stop = 0;
+static int non_stop_1 = 0;
+
+static void
+set_non_stop (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ if (target_has_execution)
+ {
+ non_stop_1 = non_stop;
+ error (_("Cannot change this setting while the inferior is running."));
+ }
+
+ non_stop = non_stop_1;
+}
+
+static void
+show_non_stop (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file,
+ _("Controlling the inferior in non-stop mode is %s.\n"),
+ value);
+}
/* "Observer mode" is somewhat like a more extreme version of
non-stop, in which all GDB operations that might affect the
target's execution have been disabled. */
-static int non_stop_1 = 0;
-
int observer_mode = 0;
static int observer_mode_1 = 0;
set_observer_mode (char *args, int from_tty,
struct cmd_list_element *c)
{
- extern int pagination_enabled;
-
if (target_has_execution)
{
observer_mode_1 = observer_mode;
/* Tell the target to do whatever is necessary to follow
either parent or child. */
- if (target_follow_fork (follow_child))
+ if (target_follow_fork (follow_child, detach_fork))
{
/* Target refused to follow, or there's some other reason
we shouldn't resume. */
= bpstat_stop_status (get_regcache_aspace (regcache),
stop_pc, ecs->ptid, &ecs->ws);
- sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
+ GDB_SIGNAL_TRAP);
ecs->random_signal = sval == BPSTAT_SIGNAL_NO;
if (!ecs->random_signal)
stop_pc, ecs->ptid, &ecs->ws);
sval
- = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
+ GDB_SIGNAL_TRAP);
ecs->random_signal = sval == BPSTAT_SIGNAL_NO;
if (!ecs->random_signal)
= bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
stop_pc, ecs->ptid, &ecs->ws);
ecs->random_signal
- = (bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
+ = (bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
+ GDB_SIGNAL_TRAP)
== BPSTAT_SIGNAL_NO);
/* Note that this may be referenced from inside
if (debug_infrun
&& ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
- && (bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
+ && (bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
+ GDB_SIGNAL_TRAP)
== BPSTAT_SIGNAL_NO)
&& stopped_by_watchpoint)
fprintf_unfiltered (gdb_stdlog,
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
ecs->random_signal
- = !((bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
+ = !((bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
+ GDB_SIGNAL_TRAP)
!= BPSTAT_SIGNAL_NO)
|| stopped_by_watchpoint
|| ecs->event_thread->control.trap_expected
{
enum bpstat_signal_value sval;
- sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
+ sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
+ ecs->event_thread->suspend.stop_signal);
ecs->random_signal = (sval == BPSTAT_SIGNAL_NO);
if (sval == BPSTAT_SIGNAL_HIDE)
}
}
-/* User interface for non-stop mode. */
-
-int non_stop = 0;
-
-static void
-set_non_stop (char *args, int from_tty,
- struct cmd_list_element *c)
-{
- if (target_has_execution)
- {
- non_stop_1 = non_stop;
- error (_("Cannot change this setting while the inferior is running."));
- }
-
- non_stop = non_stop_1;
-}
-
-static void
-show_non_stop (struct ui_file *file, int from_tty,
- struct cmd_list_element *c, const char *value)
-{
- fprintf_filtered (file,
- _("Controlling the inferior in non-stop mode is %s.\n"),
- value);
-}
-
static void
show_schedule_multiple (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
projects / deliverable / binutils-gdb.git / blobdiff