#endif
-/* Convert the #defines into values. This is temporary until wfi control
- flow is completely sorted out. */
-
-#ifndef CANNOT_STEP_HW_WATCHPOINTS
-#define CANNOT_STEP_HW_WATCHPOINTS 0
-#else
-#undef CANNOT_STEP_HW_WATCHPOINTS
-#define CANNOT_STEP_HW_WATCHPOINTS 1
-#endif
-
/* Tables of how to react to signals; the user sets them. */
static unsigned char *signal_stop;
"trap_expected=%d\n",
step, sig, tp->trap_expected);
- /* Some targets (e.g. Solaris x86) have a kernel bug when stepping
- over an instruction that causes a page fault without triggering
- a hardware watchpoint. The kernel properly notices that it shouldn't
- stop, because the hardware watchpoint is not triggered, but it forgets
- the step request and continues the program normally.
- Work around the problem by removing hardware watchpoints if a step is
- requested, GDB will check for a hardware watchpoint trigger after the
- step anyway. */
- if (CANNOT_STEP_HW_WATCHPOINTS && step)
- remove_hw_watchpoints ();
-
-
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
ui_file_delete (tmp_stream);
}
+/* Prepare and stabilize the inferior for detaching it. E.g.,
+ detaching while a thread is displaced stepping is a recipe for
+ crashing it, as nothing would readjust the PC out of the scratch
+ pad. */
+
+void
+prepare_for_detach (void)
+{
+ struct inferior *inf = current_inferior ();
+ ptid_t pid_ptid = pid_to_ptid (inf->pid);
+ struct cleanup *old_chain_1;
+ struct displaced_step_inferior_state *displaced;
+
+ displaced = get_displaced_stepping_state (inf->pid);
+
+ /* Is any thread of this process displaced stepping? If not,
+ there's nothing else to do. */
+ if (displaced == NULL || ptid_equal (displaced->step_ptid, null_ptid))
+ return;
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced-stepping in-process while detaching");
+
+ old_chain_1 = make_cleanup_restore_integer (&inf->detaching);
+ inf->detaching = 1;
+
+ while (!ptid_equal (displaced->step_ptid, null_ptid))
+ {
+ struct cleanup *old_chain_2;
+ struct execution_control_state ecss;
+ struct execution_control_state *ecs;
+
+ ecs = &ecss;
+ memset (ecs, 0, sizeof (*ecs));
+
+ overlay_cache_invalid = 1;
+
+ /* We have to invalidate the registers BEFORE calling
+ target_wait because they can be loaded from the target while
+ in target_wait. This makes remote debugging a bit more
+ efficient for those targets that provide critical registers
+ as part of their normal status mechanism. */
+
+ registers_changed ();
+
+ if (deprecated_target_wait_hook)
+ ecs->ptid = deprecated_target_wait_hook (pid_ptid, &ecs->ws, 0);
+ else
+ ecs->ptid = target_wait (pid_ptid, &ecs->ws, 0);
+
+ if (debug_infrun)
+ print_target_wait_results (pid_ptid, ecs->ptid, &ecs->ws);
+
+ /* If an error happens while handling the event, propagate GDB's
+ knowledge of the executing state to the frontend/user running
+ state. */
+ old_chain_2 = make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
+
+ /* Now figure out what to do with the result of the result. */
+ handle_inferior_event (ecs);
+
+ /* No error, don't finish the state yet. */
+ discard_cleanups (old_chain_2);
+
+ /* Breakpoints and watchpoints are not installed on the target
+ at this point, and signals are passed directly to the
+ inferior, so this must mean the process is gone. */
+ if (!ecs->wait_some_more)
+ {
+ discard_cleanups (old_chain_1);
+ error (_("Program exited while detaching"));
+ }
+ }
+
+ discard_cleanups (old_chain_1);
+}
+
/* Wait for control to return from inferior to debugger.
If TREAT_EXEC_AS_SIGTRAP is non-zero, then handle EXEC signals
target_last_waitstatus = ecs->ws;
/* Always clear state belonging to the previous time we stopped. */
- stop_stack_dummy = 0;
+ stop_stack_dummy = STOP_NONE;
/* If it's a new process, add it to the thread database */
{
/* Signal not for debugging purposes. */
int printed = 0;
+ struct inferior *inf = find_inferior_pid (ptid_get_pid (ecs->ptid));
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n",
to remain stopped. */
if (stop_soon != NO_STOP_QUIETLY
|| ecs->event_thread->stop_requested
- || signal_stop_state (ecs->event_thread->stop_signal))
+ || (!inf->detaching
+ && signal_stop_state (ecs->event_thread->stop_signal)))
{
stop_stepping (ecs);
return;
if (what.call_dummy)
{
- stop_stack_dummy = 1;
+ stop_stack_dummy = what.call_dummy;
}
switch (what.main_action)
stop_registers = regcache_dup (get_current_regcache ());
}
- if (stop_stack_dummy)
+ if (stop_stack_dummy == STOP_STACK_DUMMY)
{
/* Pop the empty frame that contains the stack dummy.
This also restores inferior state prior to the call
{
bpstat stop_bpstat;
int stop_step;
- int stop_stack_dummy;
+ enum stop_stack_kind stop_stack_dummy;
int stopped_by_random_signal;
int stepping_over_breakpoint;
CORE_ADDR step_range_start;
/* Since both parameters have the same type, prevent easy mistakes
from happening. */
gdb_assert (!ptid_equal (ptid, minus_one_ptid)
- && !ptid_equal (ptid, null_ptid)
- && !ptid_is_pid (ptid));
+ && !ptid_equal (ptid, null_ptid));
if (ptid_equal (filter, minus_one_ptid))
return 1;