/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2018 Free Software Foundation, Inc.
This file is part of GDB.
#include "inf-loop.h"
#include "regcache.h"
#include "value.h"
-#include "observer.h"
+#include "observable.h"
#include "language.h"
#include "solib.h"
#include "main.h"
#include "solist.h"
#include "event-loop.h"
#include "thread-fsm.h"
+#include "common/enum-flags.h"
+#include "progspace-and-thread.h"
+#include "common/gdb_optional.h"
+#include "arch-utils.h"
/* Prototypes for local functions */
-static void signals_info (char *, int);
-
-static void handle_command (char *, int);
-
static void sig_print_info (enum gdb_signal);
static void sig_print_header (void);
-static void resume_cleanups (void *);
-
-static int hook_stop_stub (void *);
-
-static int restore_selected_frame (void *);
-
static int follow_fork (void);
static int follow_fork_inferior (int follow_child, int detach_fork);
static void follow_inferior_reset_breakpoints (void);
-static void set_schedlock_func (char *args, int from_tty,
- struct cmd_list_element *c);
-
static int currently_stepping (struct thread_info *tp);
-void _initialize_infrun (void);
-
void nullify_last_target_wait_ptid (void);
static void insert_hp_step_resume_breakpoint_at_frame (struct frame_info *);
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
}
-/* In asynchronous mode, but simulating synchronous execution. */
-
-int sync_execution = 0;
-
/* proceed and normal_stop use this to notify the user when the
inferior stopped in a different thread than it had been running
in. */
}
static void
-set_disable_randomization (char *args, int from_tty,
+set_disable_randomization (const char *args, int from_tty,
struct cmd_list_element *c)
{
if (!target_supports_disable_randomization ())
static int non_stop_1 = 0;
static void
-set_non_stop (char *args, int from_tty,
+set_non_stop (const char *args, int from_tty,
struct cmd_list_element *c)
{
if (target_has_execution)
static int observer_mode_1 = 0;
static void
-set_observer_mode (char *args, int from_tty,
+set_observer_mode (const char *args, int from_tty,
struct cmd_list_element *c)
{
if (target_has_execution)
as appropriate when the above flag is changed. */
static void
-set_stop_on_solib_events (char *args, int from_tty, struct cmd_list_element *c)
+set_stop_on_solib_events (const char *args,
+ int from_tty, struct cmd_list_element *c)
{
update_solib_breakpoints ();
}
value);
}
-/* Nonzero means expecting a trace trap
- and should stop the inferior and return silently when it happens. */
-
-int stop_after_trap;
-
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
if (has_vforked
&& !non_stop /* Non-stop always resumes both branches. */
- && (!target_is_async_p () || sync_execution)
+ && current_ui->prompt_state == PROMPT_BLOCKED
&& !(follow_child || detach_fork || sched_multi))
{
/* The parent stays blocked inside the vfork syscall until the
/* Detach new forked process? */
if (detach_fork)
{
- struct cleanup *old_chain;
-
/* Before detaching from the child, remove all breakpoints
from it. If we forked, then this has already been taken
care of by infrun.c. If we vforked however, any
/* Ensure that we have a process ptid. */
ptid_t process_ptid = pid_to_ptid (ptid_get_pid (child_ptid));
- target_terminal_ours_for_output ();
+ target_terminal::ours_for_output ();
fprintf_filtered (gdb_stdlog,
_("Detaching after %s from child %s.\n"),
has_vforked ? "vfork" : "fork",
else
{
struct inferior *parent_inf, *child_inf;
- struct cleanup *old_chain;
/* Add process to GDB's tables. */
child_inf = add_inferior (ptid_get_pid (child_ptid));
child_inf->gdbarch = parent_inf->gdbarch;
copy_inferior_target_desc_info (child_inf, parent_inf);
- old_chain = save_inferior_ptid ();
- save_current_program_space ();
+ scoped_restore_current_pspace_and_thread restore_pspace_thread;
inferior_ptid = child_ptid;
add_thread (inferior_ptid);
+ set_current_inferior (child_inf);
child_inf->symfile_flags = SYMFILE_NO_READ;
/* If this is a vfork child, then the address-space is
else
{
child_inf->aspace = new_address_space ();
- child_inf->pspace = add_program_space (child_inf->aspace);
+ child_inf->pspace = new program_space (child_inf->aspace);
child_inf->removable = 1;
set_current_program_space (child_inf->pspace);
clone_program_space (child_inf->pspace, parent_inf->pspace);
required. */
solib_create_inferior_hook (0);
}
-
- do_cleanups (old_chain);
}
if (has_vforked)
if (info_verbose || debug_infrun)
{
- target_terminal_ours_for_output ();
+ target_terminal::ours_for_output ();
fprintf_filtered (gdb_stdlog,
_("Attaching after %s %s to child %s.\n"),
target_pid_to_str (parent_ptid),
/* Ensure that we have a process ptid. */
ptid_t process_ptid = pid_to_ptid (ptid_get_pid (child_ptid));
- target_terminal_ours_for_output ();
+ target_terminal::ours_for_output ();
fprintf_filtered (gdb_stdlog,
_("Detaching after fork from "
"child %s.\n"),
target_pid_to_str (process_ptid));
}
- target_detach (NULL, 0);
+ target_detach (parent_inf, 0);
}
/* Note that the detach above makes PARENT_INF dangling. */
inferior_ptid = child_ptid;
add_thread (inferior_ptid);
+ set_current_inferior (child_inf);
/* If this is a vfork child, then the address-space is shared
with the parent. If we detached from the parent, then we can
else
{
child_inf->aspace = new_address_space ();
- child_inf->pspace = add_program_space (child_inf->aspace);
+ child_inf->pspace = new program_space (child_inf->aspace);
child_inf->removable = 1;
child_inf->symfile_flags = SYMFILE_NO_READ;
set_current_program_space (child_inf->pspace);
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
- struct interp *command_interp = NULL;
+ struct thread_fsm *thread_fsm = NULL;
if (!non_stop)
{
step_frame_id = tp->control.step_frame_id;
exception_resume_breakpoint
= clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
- command_interp = tp->control.command_interp;
+ thread_fsm = tp->thread_fsm;
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
tp->control.step_range_end = 0;
tp->control.step_frame_id = null_frame_id;
delete_exception_resume_breakpoint (tp);
- tp->control.command_interp = NULL;
+ tp->thread_fsm = NULL;
}
parent = inferior_ptid;
tp->control.step_frame_id = step_frame_id;
tp->control.exception_resume_breakpoint
= exception_resume_breakpoint;
- tp->control.command_interp = command_interp;
+ tp->thread_fsm = thread_fsm;
}
else
{
return 0;
}
+/* Save/restore inferior_ptid, current program space and current
+ inferior. Only use this if the current context points at an exited
+ inferior (and therefore there's no current thread to save). */
+class scoped_restore_exited_inferior
+{
+public:
+ scoped_restore_exited_inferior ()
+ : m_saved_ptid (&inferior_ptid)
+ {}
+
+private:
+ scoped_restore_tmpl<ptid_t> m_saved_ptid;
+ scoped_restore_current_program_space m_pspace;
+ scoped_restore_current_inferior m_inferior;
+};
+
/* Called whenever we notice an exec or exit event, to handle
detaching or resuming a vfork parent. */
if (inf->vfork_parent->pending_detach)
{
struct thread_info *tp;
- struct cleanup *old_chain;
struct program_space *pspace;
struct address_space *aspace;
inf->vfork_parent->pending_detach = 0;
+ gdb::optional<scoped_restore_exited_inferior>
+ maybe_restore_inferior;
+ gdb::optional<scoped_restore_current_pspace_and_thread>
+ maybe_restore_thread;
+
+ /* If we're handling a child exit, then inferior_ptid points
+ at the inferior's pid, not to a thread. */
if (!exec)
- {
- /* If we're handling a child exit, then inferior_ptid
- points at the inferior's pid, not to a thread. */
- old_chain = save_inferior_ptid ();
- save_current_program_space ();
- save_current_inferior ();
- }
+ maybe_restore_inferior.emplace ();
else
- old_chain = save_current_space_and_thread ();
+ maybe_restore_thread.emplace ();
/* We're letting loose of the parent. */
tp = any_live_thread_of_process (inf->vfork_parent->pid);
if (debug_infrun || info_verbose)
{
- target_terminal_ours_for_output ();
+ target_terminal::ours_for_output ();
if (exec)
{
}
}
- target_detach (NULL, 0);
+ target_detach (inf->vfork_parent, 0);
/* Put it back. */
inf->pspace = pspace;
inf->aspace = aspace;
-
- do_cleanups (old_chain);
}
else if (exec)
{
/* We're staying attached to the parent, so, really give the
child a new address space. */
- inf->pspace = add_program_space (maybe_new_address_space ());
+ inf->pspace = new program_space (maybe_new_address_space ());
inf->aspace = inf->pspace->aspace;
inf->removable = 1;
set_current_program_space (inf->pspace);
}
else
{
- struct cleanup *old_chain;
struct program_space *pspace;
/* If this is a vfork child exiting, then the pspace and
go ahead and create a new one for this exiting
inferior. */
- /* Switch to null_ptid, so that clone_program_space doesn't want
- to read the selected frame of a dead process. */
- old_chain = save_inferior_ptid ();
- inferior_ptid = null_ptid;
+ /* Switch to null_ptid while running clone_program_space, so
+ that clone_program_space doesn't want to read the
+ selected frame of a dead process. */
+ scoped_restore restore_ptid
+ = make_scoped_restore (&inferior_ptid, null_ptid);
/* This inferior is dead, so avoid giving the breakpoints
module the option to write through to it (cloning a
program space resets breakpoints). */
inf->aspace = NULL;
inf->pspace = NULL;
- pspace = add_program_space (maybe_new_address_space ());
+ pspace = new program_space (maybe_new_address_space ());
set_current_program_space (pspace);
inf->removable = 1;
inf->symfile_flags = SYMFILE_NO_READ;
inf->pspace = pspace;
inf->aspace = pspace->aspace;
- /* Put back inferior_ptid. We'll continue mourning this
- inferior. */
- do_cleanups (old_chain);
-
resume_parent = inf->vfork_parent->pid;
/* Break the bonds. */
inf->vfork_parent->vfork_child = NULL;
{
/* If the user wanted the parent to be running, let it go
free now. */
- struct cleanup *old_chain = make_cleanup_restore_current_thread ();
+ scoped_restore_current_thread restore_thread;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
resume_parent);
iterate_over_threads (proceed_after_vfork_done, &resume_parent);
-
- do_cleanups (old_chain);
}
}
}
fprintf_filtered (file, _("Follow exec mode is \"%s\".\n"), value);
}
-/* EXECD_PATHNAME is assumed to be non-NULL. */
+/* EXEC_FILE_TARGET is assumed to be non-NULL. */
static void
-follow_exec (ptid_t ptid, char *execd_pathname)
+follow_exec (ptid_t ptid, char *exec_file_target)
{
struct thread_info *th, *tmp;
struct inferior *inf = current_inferior ();
int pid = ptid_get_pid (ptid);
+ ptid_t process_ptid;
/* This is an exec event that we actually wish to pay attention to.
Refresh our symbol table to the newly exec'd program, remove any
update_breakpoints_after_exec ();
/* What is this a.out's name? */
+ process_ptid = pid_to_ptid (pid);
printf_unfiltered (_("%s is executing new program: %s\n"),
- target_pid_to_str (inferior_ptid),
- execd_pathname);
+ target_pid_to_str (process_ptid),
+ exec_file_target);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
breakpoint_init_inferior (inf_execd);
- if (*gdb_sysroot != '\0')
- {
- char *name = exec_file_find (execd_pathname, NULL);
+ gdb::unique_xmalloc_ptr<char> exec_file_host
+ = exec_file_find (exec_file_target, NULL);
- execd_pathname = alloca (strlen (name) + 1);
- strcpy (execd_pathname, name);
- xfree (name);
- }
+ /* If we were unable to map the executable target pathname onto a host
+ pathname, tell the user that. Otherwise GDB's subsequent behavior
+ is confusing. Maybe it would even be better to stop at this point
+ so that the user can specify a file manually before continuing. */
+ if (exec_file_host == NULL)
+ warning (_("Could not load symbols for executable %s.\n"
+ "Do you need \"set sysroot\"?"),
+ exec_file_target);
/* Reset the shared library package. This ensures that we get a
shlib event when the child reaches "_start", at which point the
if (follow_exec_mode_string == follow_exec_mode_new)
{
- struct program_space *pspace;
-
/* The user wants to keep the old inferior and program spaces
around. Create a new fresh one, and switch to it. */
the same ptid, which can confuse find_inferior_ptid. */
exit_inferior_num_silent (current_inferior ()->num);
- inf = add_inferior (pid);
- pspace = add_program_space (maybe_new_address_space ());
- inf->pspace = pspace;
- inf->aspace = pspace->aspace;
- add_thread (ptid);
+ inf = add_inferior_with_spaces ();
+ inf->pid = pid;
+ target_follow_exec (inf, exec_file_target);
set_current_inferior (inf);
- set_current_program_space (pspace);
+ set_current_program_space (inf->pspace);
}
else
{
gdb_assert (current_program_space == inf->pspace);
- /* That a.out is now the one to use. */
- exec_file_attach (execd_pathname, 0);
-
- /* SYMFILE_DEFER_BP_RESET is used as the proper displacement for PIE
- (Position Independent Executable) main symbol file will get applied by
- solib_create_inferior_hook below. breakpoint_re_set would fail to insert
- the breakpoints with the zero displacement. */
-
- symbol_file_add (execd_pathname,
- (inf->symfile_flags
- | SYMFILE_MAINLINE | SYMFILE_DEFER_BP_RESET),
- NULL, 0);
-
- if ((inf->symfile_flags & SYMFILE_NO_READ) == 0)
- set_initial_language ();
+ /* Attempt to open the exec file. SYMFILE_DEFER_BP_RESET is used
+ because the proper displacement for a PIE (Position Independent
+ Executable) main symbol file will only be computed by
+ solib_create_inferior_hook below. breakpoint_re_set would fail
+ to insert the breakpoints with the zero displacement. */
+ try_open_exec_file (exec_file_host.get (), inf, SYMFILE_DEFER_BP_RESET);
/* If the target can specify a description, read it. Must do this
after flipping to the new executable (because the target supplied
registers. */
target_find_description ();
+ /* The add_thread call ends up reading registers, so do it after updating the
+ target description. */
+ if (follow_exec_mode_string == follow_exec_mode_new)
+ add_thread (ptid);
+
solib_create_inferior_hook (0);
jit_inferior_created_hook ();
/* Bit flags indicating what the thread needs to step over. */
-enum step_over_what
+enum step_over_what_flag
{
/* Step over a breakpoint. */
STEP_OVER_BREAKPOINT = 1,
expression. */
STEP_OVER_WATCHPOINT = 2
};
+DEF_ENUM_FLAGS_TYPE (enum step_over_what_flag, step_over_what);
/* Info about an instruction that is being stepped over. */
and address of the instruction the breakpoint is set at. We'll
skip inserting all breakpoints here. Valid iff ASPACE is
non-NULL. */
- struct address_space *aspace;
+ const address_space *aspace;
CORE_ADDR address;
/* The instruction being stepped over triggers a nonsteppable
watchpoint. If true, we'll skip inserting watchpoints. */
int nonsteppable_watchpoint_p;
+
+ /* The thread's global number. */
+ int thread;
};
/* The step-over info of the location that is being stepped over.
static struct step_over_info step_over_info;
/* Record the address of the breakpoint/instruction we're currently
- stepping over. */
+ stepping over.
+ N.B. We record the aspace and address now, instead of say just the thread,
+ because when we need the info later the thread may be running. */
static void
-set_step_over_info (struct address_space *aspace, CORE_ADDR address,
- int nonsteppable_watchpoint_p)
+set_step_over_info (const address_space *aspace, CORE_ADDR address,
+ int nonsteppable_watchpoint_p,
+ int thread)
{
step_over_info.aspace = aspace;
step_over_info.address = address;
step_over_info.nonsteppable_watchpoint_p = nonsteppable_watchpoint_p;
+ step_over_info.thread = thread;
}
/* Called when we're not longer stepping over a breakpoint / an
step_over_info.aspace = NULL;
step_over_info.address = 0;
step_over_info.nonsteppable_watchpoint_p = 0;
+ step_over_info.thread = -1;
}
/* See infrun.h. */
/* See infrun.h. */
+int
+thread_is_stepping_over_breakpoint (int thread)
+{
+ return (step_over_info.thread != -1
+ && thread == step_over_info.thread);
+}
+
+/* See infrun.h. */
+
int
stepping_past_nonsteppable_watchpoint (void)
{
same effect the instruction would have had if we had executed it
at its original address. We use this in step n3.
- - gdbarch_displaced_step_free_closure provides cleanup.
-
The gdbarch_displaced_step_copy_insn and
gdbarch_displaced_step_fixup functions must be written so that
copying an instruction with gdbarch_displaced_step_copy_insn,
displaced step operation on it. See displaced_step_prepare and
displaced_step_fixup for details. */
+/* Default destructor for displaced_step_closure. */
+
+displaced_step_closure::~displaced_step_closure () = default;
+
/* Per-inferior displaced stepping state. */
struct displaced_step_inferior_state
{
return 0;
}
+/* Return true if thread represented by PTID is doing a displaced
+ step. */
+
+static int
+displaced_step_in_progress_thread (ptid_t ptid)
+{
+ struct displaced_step_inferior_state *displaced;
+
+ gdb_assert (!ptid_equal (ptid, null_ptid));
+
+ displaced = get_displaced_stepping_state (ptid_get_pid (ptid));
+
+ return (displaced != NULL && ptid_equal (displaced->step_ptid, ptid));
+}
+
/* Return true if process PID has a thread doing a displaced step. */
static int
use_displaced_stepping (struct thread_info *tp)
{
struct regcache *regcache = get_thread_regcache (tp->ptid);
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
struct displaced_step_inferior_state *displaced_state;
displaced_state = get_displaced_stepping_state (ptid_get_pid (tp->ptid));
/* Indicate that there is no cleanup pending. */
displaced->step_ptid = null_ptid;
- if (displaced->step_closure)
- {
- gdbarch_displaced_step_free_closure (displaced->step_gdbarch,
- displaced->step_closure);
- displaced->step_closure = NULL;
- }
+ delete displaced->step_closure;
+ displaced->step_closure = NULL;
}
static void
displaced_step_clear_cleanup (void *arg)
{
- struct displaced_step_inferior_state *state = arg;
+ struct displaced_step_inferior_state *state
+ = (struct displaced_step_inferior_state *) arg;
displaced_step_clear (state);
}
static int
displaced_step_prepare_throw (ptid_t ptid)
{
- struct cleanup *old_cleanups, *ignore_cleanups;
+ struct cleanup *ignore_cleanups;
struct thread_info *tp = find_thread_ptid (ptid);
struct regcache *regcache = get_thread_regcache (ptid);
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
+ const address_space *aspace = regcache->aspace ();
CORE_ADDR original, copy;
ULONGEST len;
struct displaced_step_closure *closure;
displaced_step_clear (displaced);
- old_cleanups = save_inferior_ptid ();
+ scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid);
inferior_ptid = ptid;
original = regcache_read_pc (regcache);
copy = gdbarch_displaced_step_location (gdbarch);
len = gdbarch_max_insn_length (gdbarch);
+ if (breakpoint_in_range_p (aspace, copy, len))
+ {
+ /* There's a breakpoint set in the scratch pad location range
+ (which is usually around the entry point). We'd either
+ install it before resuming, which would overwrite/corrupt the
+ scratch pad, or if it was already inserted, this displaced
+ step would overwrite it. The latter is OK in the sense that
+ we already assume that no thread is going to execute the code
+ in the scratch pad range (after initial startup) anyway, but
+ the former is unacceptable. Simply punt and fallback to
+ stepping over this breakpoint in-line. */
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: breakpoint set in scratch pad. "
+ "Stepping over breakpoint in-line instead.\n");
+ }
+
+ return -1;
+ }
+
/* Save the original contents of the copy area. */
- displaced->step_saved_copy = xmalloc (len);
+ displaced->step_saved_copy = (gdb_byte *) xmalloc (len);
ignore_cleanups = make_cleanup (free_current_contents,
&displaced->step_saved_copy);
status = target_read_memory (copy, displaced->step_saved_copy, len);
/* The architecture doesn't know how or want to displaced step
this instruction or instruction sequence. Fallback to
stepping over the breakpoint in-line. */
- do_cleanups (old_cleanups);
+ do_cleanups (ignore_cleanups);
return -1;
}
discard_cleanups (ignore_cleanups);
- do_cleanups (old_cleanups);
-
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to %s\n",
paddress (gdbarch, copy));
{
struct displaced_step_inferior_state *displaced_state;
- if (ex.error != MEMORY_ERROR)
+ if (ex.error != MEMORY_ERROR
+ && ex.error != NOT_SUPPORTED_ERROR)
throw_exception (ex);
if (debug_infrun)
write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr,
const gdb_byte *myaddr, int len)
{
- struct cleanup *ptid_cleanup = save_inferior_ptid ();
+ scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid);
inferior_ptid = ptid;
write_memory (memaddr, myaddr, len);
- do_cleanups (ptid_cleanup);
}
/* Restore the contents of the copy area for thread PTID. */
static void keep_going_pass_signal (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static int keep_going_stepped_thread (struct thread_info *tp);
-static int thread_still_needs_step_over (struct thread_info *tp);
-static void stop_all_threads (void);
+static step_over_what thread_still_needs_step_over (struct thread_info *tp);
/* Are there any pending step-over requests? If so, run all we can
now and return true. Otherwise, return false. */
{
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
- enum step_over_what step_what;
+ step_over_what step_what;
int must_be_in_line;
+ gdb_assert (!tp->stop_requested);
+
next = thread_step_over_chain_next (tp);
/* If this inferior already has a displaced step in process,
static void
infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
{
- struct displaced_step_request *it;
struct displaced_step_inferior_state *displaced;
if (ptid_equal (inferior_ptid, old_ptid))
}
\f
-/* Resuming. */
-
-/* Things to clean up if we QUIT out of resume (). */
-static void
-resume_cleanups (void *ignore)
-{
- if (!ptid_equal (inferior_ptid, null_ptid))
- delete_single_step_breakpoints (inferior_thread ());
-
- normal_stop ();
-}
static const char schedlock_off[] = "off";
static const char schedlock_on[] = "on";
static const char schedlock_step[] = "step";
+static const char schedlock_replay[] = "replay";
static const char *const scheduler_enums[] = {
schedlock_off,
schedlock_on,
schedlock_step,
+ schedlock_replay,
NULL
};
-static const char *scheduler_mode = schedlock_off;
+static const char *scheduler_mode = schedlock_replay;
static void
show_scheduler_mode (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
}
static void
-set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
+set_schedlock_func (const char *args, int from_tty, struct cmd_list_element *c)
{
if (!target_can_lock_scheduler)
{
int hw_step = 1;
if (execution_direction == EXEC_FORWARD
- && gdbarch_software_single_step_p (gdbarch)
- && gdbarch_software_single_step (gdbarch, get_current_frame ()))
- {
- hw_step = 0;
- }
+ && gdbarch_software_single_step_p (gdbarch))
+ hw_step = !insert_single_step_breakpoints (gdbarch);
+
return hw_step;
}
resume. */
resume_ptid = inferior_ptid;
}
+ else if ((scheduler_mode == schedlock_replay)
+ && target_record_will_replay (minus_one_ptid, execution_direction))
+ {
+ /* User-settable 'scheduler' mode requires solo thread resume in replay
+ mode. */
+ resume_ptid = inferior_ptid;
+ }
else if (!sched_multi && target_supports_multi_process ())
{
/* Resume all threads of the current process (and none of other
{
struct thread_info *tp = inferior_thread ();
+ gdb_assert (!tp->stop_requested);
+
/* Install inferior's terminal modes. */
- target_terminal_inferior ();
+ target_terminal::inferior ();
/* Avoid confusing the next resume, if the next stop/resume
happens to apply to another thread. */
target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
target_resume (resume_ptid, step, sig);
+
+ target_commit_resume ();
}
-/* Resume the inferior, but allow a QUIT. This is useful if the user
- wants to interrupt some lengthy single-stepping operation
- (for child processes, the SIGINT goes to the inferior, and so
- we get a SIGINT random_signal, but for remote debugging and perhaps
- other targets, that's not true).
+/* Resume the inferior. SIG is the signal to give the inferior
+ (GDB_SIGNAL_0 for none). Note: don't call this directly; instead
+ call 'resume', which handles exceptions. */
- SIG is the signal to give the inferior (zero for none). */
-void
-resume (enum gdb_signal sig)
+static void
+resume_1 (enum gdb_signal sig)
{
- struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
struct thread_info *tp = inferior_thread ();
CORE_ADDR pc = regcache_read_pc (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
+ const address_space *aspace = regcache->aspace ();
ptid_t resume_ptid;
/* This represents the user's step vs continue request. When
deciding whether "set scheduler-locking step" applies, it's the
single-step). */
int step;
+ gdb_assert (!tp->stop_requested);
gdb_assert (!thread_is_in_step_over_chain (tp));
- QUIT;
-
if (tp->suspend.waitstatus_pending_p)
{
if (debug_infrun)
{
- char *statstr;
+ std::string statstr
+ = target_waitstatus_to_string (&tp->suspend.waitstatus);
- statstr = target_waitstatus_to_string (&tp->suspend.waitstatus);
fprintf_unfiltered (gdb_stdlog,
- "infrun: resume: thread %s has pending wait status %s "
- "(currently_stepping=%d).\n",
- target_pid_to_str (tp->ptid), statstr,
+ "infrun: resume: thread %s has pending wait "
+ "status %s (currently_stepping=%d).\n",
+ target_pid_to_str (tp->ptid), statstr.c_str (),
currently_stepping (tp));
- xfree (statstr);
}
tp->resumed = 1;
}
tp->suspend.stop_signal = GDB_SIGNAL_0;
- discard_cleanups (old_cleanups);
if (target_can_async_p ())
target_async (1);
resume_ptid = internal_resume_ptid (user_step);
do_target_resume (resume_ptid, 0, GDB_SIGNAL_0);
- discard_cleanups (old_cleanups);
tp->resumed = 1;
return;
}
"Got placed in step-over queue\n");
tp->control.trap_expected = 0;
- discard_cleanups (old_cleanups);
return;
}
else if (prepared < 0)
if (target_is_non_stop_p ())
stop_all_threads ();
- set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), 0);
+ set_step_over_info (regcache->aspace (),
+ regcache_read_pc (regcache), 0, tp->global_num);
step = maybe_software_singlestep (gdbarch, pc);
gdb_assert (!(thread_has_single_step_breakpoints_set (tp) && step));
/* Decide the set of threads to ask the target to resume. */
- if ((step || thread_has_single_step_breakpoints_set (tp))
- && tp->control.trap_expected)
+ if (tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
- hit, by single-stepping the thread with the breakpoint
- removed. In which case, we need to single-step only this
- thread, and keep others stopped, as they can miss this
- breakpoint if allowed to run. */
+ hit, either by single-stepping the thread with the breakpoint
+ removed, or by displaced stepping, with the breakpoint inserted.
+ In the former case, we need to single-step only this thread,
+ and keep others stopped, as they can miss this breakpoint if
+ allowed to run. That's not really a problem for displaced
+ stepping, but, we still keep other threads stopped, in case
+ another thread is also stopped for a breakpoint waiting for
+ its turn in the displaced stepping queue. */
resume_ptid = inferior_ptid;
}
else
&& !step_over_info_valid_p ())
{
struct regcache *resume_regcache = get_thread_regcache (tp->ptid);
- struct gdbarch *resume_gdbarch = get_regcache_arch (resume_regcache);
+ struct gdbarch *resume_gdbarch = resume_regcache->arch ();
CORE_ADDR actual_pc = regcache_read_pc (resume_regcache);
gdb_byte buf[4];
do_target_resume (resume_ptid, step, sig);
tp->resumed = 1;
- discard_cleanups (old_cleanups);
}
+
+/* Resume the inferior. SIG is the signal to give the inferior
+ (GDB_SIGNAL_0 for none). This is a wrapper around 'resume_1' that
+ rolls back state on error. */
+
+void
+resume (gdb_signal sig)
+{
+ TRY
+ {
+ resume_1 (sig);
+ }
+ CATCH (ex, RETURN_MASK_ALL)
+ {
+ /* If resuming is being aborted for any reason, delete any
+ single-step breakpoint resume_1 may have created, to avoid
+ confusing the following resumption, and to avoid leaving
+ single-step breakpoints perturbing other threads, in case
+ we're running in non-stop mode. */
+ if (inferior_ptid != null_ptid)
+ delete_single_step_breakpoints (inferior_thread ());
+ throw_exception (ex);
+ }
+ END_CATCH
+}
+
\f
/* Proceeding. */
+/* See infrun.h. */
+
+/* Counter that tracks number of user visible stops. This can be used
+ to tell whether a command has proceeded the inferior past the
+ current location. This allows e.g., inferior function calls in
+ breakpoint commands to not interrupt the command list. When the
+ call finishes successfully, the inferior is standing at the same
+ breakpoint as if nothing happened (and so we don't call
+ normal_stop). */
+static ULONGEST current_stop_id;
+
+/* See infrun.h. */
+
+ULONGEST
+get_stop_id (void)
+{
+ return current_stop_id;
+}
+
+/* Called when we report a user visible stop. */
+
+static void
+new_stop_id (void)
+{
+ current_stop_id++;
+}
+
/* Clear out all variables saying what to do when inferior is continued.
First do this, then set the ones you want, then call `proceed'. */
}
else if (debug_infrun)
{
- char *statstr;
+ std::string statstr
+ = target_waitstatus_to_string (&tp->suspend.waitstatus);
- statstr = target_waitstatus_to_string (&tp->suspend.waitstatus);
fprintf_unfiltered (gdb_stdlog,
"infrun: clear_proceed_status_thread: thread %s "
"has pending wait status %s "
"(currently_stepping=%d).\n",
- target_pid_to_str (tp->ptid), statstr,
+ target_pid_to_str (tp->ptid), statstr.c_str (),
currently_stepping (tp));
- xfree (statstr);
}
}
tp->control.proceed_to_finish = 0;
- tp->control.command_interp = NULL;
tp->control.stepping_command = 0;
/* Discard any remaining commands or status from previous stop. */
void
clear_proceed_status (int step)
{
+ /* With scheduler-locking replay, stop replaying other threads if we're
+ not replaying the user-visible resume ptid.
+
+ This is a convenience feature to not require the user to explicitly
+ stop replaying the other threads. We're assuming that the user's
+ intent is to resume tracing the recorded process. */
+ if (!non_stop && scheduler_mode == schedlock_replay
+ && target_record_is_replaying (minus_one_ptid)
+ && !target_record_will_replay (user_visible_resume_ptid (step),
+ execution_direction))
+ target_record_stop_replaying ();
+
if (!non_stop)
{
struct thread_info *tp;
inferior->control.stop_soon = NO_STOP_QUIETLY;
}
- stop_after_trap = 0;
-
- observer_notify_about_to_proceed ();
+ gdb::observers::about_to_proceed.notify ();
}
/* Returns true if TP is still stopped at a breakpoint that needs
{
struct regcache *regcache = get_thread_regcache (tp->ptid);
- if (breakpoint_here_p (get_regcache_aspace (regcache),
+ if (breakpoint_here_p (regcache->aspace (),
regcache_read_pc (regcache))
== ordinary_breakpoint_here)
return 1;
to make progress when resumed. Returns an bitwise or of enum
step_over_what bits, indicating what needs to be stepped over. */
-static int
+static step_over_what
thread_still_needs_step_over (struct thread_info *tp)
{
- struct inferior *inf = find_inferior_ptid (tp->ptid);
- int what = 0;
+ step_over_what what = 0;
if (thread_still_needs_step_over_bp (tp))
what |= STEP_OVER_BREAKPOINT;
{
return (scheduler_mode == schedlock_on
|| (scheduler_mode == schedlock_step
- && tp->control.stepping_command));
+ && tp->control.stepping_command)
+ || (scheduler_mode == schedlock_replay
+ && target_record_will_replay (minus_one_ptid,
+ execution_direction)));
}
/* Basic routine for continuing the program in various fashions.
struct gdbarch *gdbarch;
struct thread_info *tp;
CORE_ADDR pc;
- struct address_space *aspace;
ptid_t resume_ptid;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
previous_inferior_ptid = inferior_ptid;
regcache = get_current_regcache ();
- gdbarch = get_regcache_arch (regcache);
- aspace = get_regcache_aspace (regcache);
+ gdbarch = regcache->arch ();
+ const address_space *aspace = regcache->aspace ();
+
pc = regcache_read_pc (regcache);
tp = inferior_thread ();
if (siggnal != GDB_SIGNAL_DEFAULT)
tp->suspend.stop_signal = siggnal;
- /* Record the interpreter that issued the execution command that
- caused this thread to resume. If the top level interpreter is
- MI/async, and the execution command was a CLI command
- (next/step/etc.), we'll want to print stop event output to the MI
- console channel (the stepped-to line, etc.), as if the user
- entered the execution command on a real GDB console. */
- tp->control.command_interp = command_interp ();
-
resume_ptid = user_visible_resume_ptid (tp->control.stepping_command);
/* If an exception is thrown from this point on, make sure to
inferior. */
gdb_flush (gdb_stdout);
+ /* Since we've marked the inferior running, give it the terminal. A
+ QUIT/Ctrl-C from here on is forwarded to the target (which can
+ still detect attempts to unblock a stuck connection with repeated
+ Ctrl-C from within target_pass_ctrlc). */
+ target_terminal::inferior ();
+
/* In a multi-threaded task we may select another thread and
then continue or step.
until the target stops again. */
tp->prev_pc = regcache_read_pc (regcache);
- started = start_step_over ();
+ {
+ scoped_restore save_defer_tc = make_scoped_defer_target_commit_resume ();
- if (step_over_info_valid_p ())
- {
- /* Either this thread started a new in-line step over, or some
- other thread was already doing one. In either case, don't
- resume anything else until the step-over is finished. */
- }
- else if (started && !target_is_non_stop_p ())
- {
- /* A new displaced stepping sequence was started. In all-stop,
- we can't talk to the target anymore until it next stops. */
- }
- else if (!non_stop && target_is_non_stop_p ())
- {
- /* In all-stop, but the target is always in non-stop mode.
- Start all other threads that are implicitly resumed too. */
- ALL_NON_EXITED_THREADS (tp)
+ started = start_step_over ();
+
+ if (step_over_info_valid_p ())
+ {
+ /* Either this thread started a new in-line step over, or some
+ other thread was already doing one. In either case, don't
+ resume anything else until the step-over is finished. */
+ }
+ else if (started && !target_is_non_stop_p ())
+ {
+ /* A new displaced stepping sequence was started. In all-stop,
+ we can't talk to the target anymore until it next stops. */
+ }
+ else if (!non_stop && target_is_non_stop_p ())
+ {
+ /* In all-stop, but the target is always in non-stop mode.
+ Start all other threads that are implicitly resumed too. */
+ ALL_NON_EXITED_THREADS (tp)
{
/* Ignore threads of processes we're not resuming. */
if (!ptid_match (tp->ptid, resume_ptid))
if (!ecs->wait_some_more)
error (_("Command aborted."));
}
- }
- else if (!tp->resumed && !thread_is_in_step_over_chain (tp))
- {
- /* The thread wasn't started, and isn't queued, run it now. */
- reset_ecs (ecs, tp);
- switch_to_thread (tp->ptid);
- keep_going_pass_signal (ecs);
- if (!ecs->wait_some_more)
- error (_("Command aborted."));
- }
+ }
+ else if (!tp->resumed && !thread_is_in_step_over_chain (tp))
+ {
+ /* The thread wasn't started, and isn't queued, run it now. */
+ reset_ecs (ecs, tp);
+ switch_to_thread (tp->ptid);
+ keep_going_pass_signal (ecs);
+ if (!ecs->wait_some_more)
+ error (_("Command aborted."));
+ }
+ }
+
+ target_commit_resume ();
discard_cleanups (old_chain);
static void process_event_stop_test (struct execution_control_state *ecs);
static int switch_back_to_stepped_thread (struct execution_control_state *ecs);
-/* Callback for iterate over threads. If the thread is stopped, but
- the user/frontend doesn't know about that yet, go through
- normal_stop, as if the thread had just stopped now. ARG points at
- a ptid. If PTID is MINUS_ONE_PTID, applies to all threads. If
- ptid_is_pid(PTID) is true, applies to all threads of the process
- pointed at by PTID. Otherwise, apply only to the thread pointed by
- PTID. */
-
-static int
-infrun_thread_stop_requested_callback (struct thread_info *info, void *arg)
-{
- ptid_t ptid = * (ptid_t *) arg;
-
- if ((ptid_equal (info->ptid, ptid)
- || ptid_equal (minus_one_ptid, ptid)
- || (ptid_is_pid (ptid)
- && ptid_get_pid (ptid) == ptid_get_pid (info->ptid)))
- && is_running (info->ptid)
- && !is_executing (info->ptid))
- {
- struct cleanup *old_chain;
- struct execution_control_state ecss;
- struct execution_control_state *ecs = &ecss;
-
- memset (ecs, 0, sizeof (*ecs));
-
- old_chain = make_cleanup_restore_current_thread ();
-
- overlay_cache_invalid = 1;
- /* Flush target cache before starting to handle each event.
- Target was running and cache could be stale. This is just a
- heuristic. Running threads may modify target memory, but we
- don't get any event. */
- target_dcache_invalidate ();
-
- /* Go through handle_inferior_event/normal_stop, so we always
- have consistent output as if the stop event had been
- reported. */
- ecs->ptid = info->ptid;
- ecs->event_thread = info;
- ecs->ws.kind = TARGET_WAITKIND_STOPPED;
- ecs->ws.value.sig = GDB_SIGNAL_0;
-
- handle_inferior_event (ecs);
-
- if (!ecs->wait_some_more)
- {
- struct thread_info *tp;
-
- /* Cancel any running execution command. */
- thread_cancel_execution_command (info);
-
- normal_stop ();
-
- /* Finish off the continuations. */
- tp = inferior_thread ();
- do_all_intermediate_continuations_thread (tp, 1);
- do_all_continuations_thread (tp, 1);
- }
-
- do_cleanups (old_chain);
- }
-
- return 0;
-}
-
/* This function is attached as a "thread_stop_requested" observer.
Cleanup local state that assumed the PTID was to be resumed, and
report the stop to the frontend. */
{
struct thread_info *tp;
- /* PTID was requested to stop. Remove matching threads from the
- step-over queue, so we don't try to resume them
- automatically. */
+ /* PTID was requested to stop. If the thread was already stopped,
+ but the user/frontend doesn't know about that yet (e.g., the
+ thread had been temporarily paused for some step-over), set up
+ for reporting the stop now. */
ALL_NON_EXITED_THREADS (tp)
if (ptid_match (tp->ptid, ptid))
{
+ if (tp->state != THREAD_RUNNING)
+ continue;
+ if (tp->executing)
+ continue;
+
+ /* Remove matching threads from the step-over queue, so
+ start_step_over doesn't try to resume them
+ automatically. */
if (thread_is_in_step_over_chain (tp))
thread_step_over_chain_remove (tp);
- }
- iterate_over_threads (infrun_thread_stop_requested_callback, &ptid);
+ /* If the thread is stopped, but the user/frontend doesn't
+ know about that yet, queue a pending event, as if the
+ thread had just stopped now. Unless the thread already had
+ a pending event. */
+ if (!tp->suspend.waitstatus_pending_p)
+ {
+ tp->suspend.waitstatus_pending_p = 1;
+ tp->suspend.waitstatus.kind = TARGET_WAITKIND_STOPPED;
+ tp->suspend.waitstatus.value.sig = GDB_SIGNAL_0;
+ }
+
+ /* Clear the inline-frame state, since we're re-processing the
+ stop. */
+ clear_inline_frame_state (tp->ptid);
+
+ /* If this thread was paused because some other thread was
+ doing an inline-step over, let that finish first. Once
+ that happens, we'll restart all threads and consume pending
+ stop events then. */
+ if (step_over_info_valid_p ())
+ continue;
+
+ /* Otherwise we can process the (new) pending event now. Set
+ it so this pending event is considered by
+ do_target_wait. */
+ tp->resumed = 1;
+ }
}
static void
print_target_wait_results (ptid_t waiton_ptid, ptid_t result_ptid,
const struct target_waitstatus *ws)
{
- char *status_string = target_waitstatus_to_string (ws);
- struct ui_file *tmp_stream = mem_fileopen ();
- char *text;
+ std::string status_string = target_waitstatus_to_string (ws);
+ string_file stb;
/* The text is split over several lines because it was getting too long.
Call fprintf_unfiltered (gdb_stdlog) once so that the text is still
output as a unit; we want only one timestamp printed if debug_timestamp
is set. */
- fprintf_unfiltered (tmp_stream,
- "infrun: target_wait (%d.%ld.%ld",
- ptid_get_pid (waiton_ptid),
- ptid_get_lwp (waiton_ptid),
- ptid_get_tid (waiton_ptid));
+ stb.printf ("infrun: target_wait (%d.%ld.%ld",
+ ptid_get_pid (waiton_ptid),
+ ptid_get_lwp (waiton_ptid),
+ ptid_get_tid (waiton_ptid));
if (ptid_get_pid (waiton_ptid) != -1)
- fprintf_unfiltered (tmp_stream,
- " [%s]", target_pid_to_str (waiton_ptid));
- fprintf_unfiltered (tmp_stream, ", status) =\n");
- fprintf_unfiltered (tmp_stream,
- "infrun: %d.%ld.%ld [%s],\n",
- ptid_get_pid (result_ptid),
- ptid_get_lwp (result_ptid),
- ptid_get_tid (result_ptid),
- target_pid_to_str (result_ptid));
- fprintf_unfiltered (tmp_stream,
- "infrun: %s\n",
- status_string);
-
- text = ui_file_xstrdup (tmp_stream, NULL);
+ stb.printf (" [%s]", target_pid_to_str (waiton_ptid));
+ stb.printf (", status) =\n");
+ stb.printf ("infrun: %d.%ld.%ld [%s],\n",
+ ptid_get_pid (result_ptid),
+ ptid_get_lwp (result_ptid),
+ ptid_get_tid (result_ptid),
+ target_pid_to_str (result_ptid));
+ stb.printf ("infrun: %s\n", status_string.c_str ());
/* This uses %s in part to handle %'s in the text, but also to avoid
a gcc error: the format attribute requires a string literal. */
- fprintf_unfiltered (gdb_stdlog, "%s", text);
-
- xfree (status_string);
- xfree (text);
- ui_file_delete (tmp_stream);
+ fprintf_unfiltered (gdb_stdlog, "%s", stb.c_str ());
}
/* Select a thread at random, out of those which are resumed and have
|| tp->suspend.stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT))
{
struct regcache *regcache = get_thread_regcache (tp->ptid);
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
CORE_ADDR pc;
int discard = 0;
paddress (gdbarch, pc));
discard = 1;
}
- else if (!breakpoint_inserted_here_p (get_regcache_aspace (regcache), pc))
+ else if (!breakpoint_inserted_here_p (regcache->aspace (), pc))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
{
if (debug_infrun)
{
- char *statstr;
+ std::string statstr
+ = target_waitstatus_to_string (&tp->suspend.waitstatus);
- statstr = target_waitstatus_to_string (&tp->suspend.waitstatus);
fprintf_unfiltered (gdb_stdlog,
"infrun: Using pending wait status %s for %s.\n",
- statstr,
+ statstr.c_str (),
target_pid_to_str (tp->ptid));
- xfree (statstr);
}
/* Now that we've selected our final event LWP, un-adjust its PC
int decr_pc;
regcache = get_thread_regcache (tp->ptid);
- gdbarch = get_regcache_arch (regcache);
+ gdbarch = regcache->arch ();
decr_pc = gdbarch_decr_pc_after_break (gdbarch);
if (decr_pc != 0)
{
struct inferior *inf = current_inferior ();
ptid_t pid_ptid = pid_to_ptid (inf->pid);
- struct cleanup *old_chain_1;
struct displaced_step_inferior_state *displaced;
displaced = get_displaced_stepping_state (inf->pid);
fprintf_unfiltered (gdb_stdlog,
"displaced-stepping in-process while detaching");
- old_chain_1 = make_cleanup_restore_integer (&inf->detaching);
- inf->detaching = 1;
+ scoped_restore restore_detaching = make_scoped_restore (&inf->detaching, true);
while (!ptid_equal (displaced->step_ptid, null_ptid))
{
inferior, so this must mean the process is gone. */
if (!ecs->wait_some_more)
{
- discard_cleanups (old_chain_1);
+ restore_detaching.release ();
error (_("Program exited while detaching"));
}
}
- discard_cleanups (old_chain_1);
+ restore_detaching.release ();
}
/* Wait for control to return from inferior to debugger.
static void
reinstall_readline_callback_handler_cleanup (void *arg)
{
- if (!interpreter_async)
+ struct ui *ui = current_ui;
+
+ if (!ui->async)
{
/* We're not going back to the top level event loop yet. Don't
install the readline callback, as it'd prep the terminal,
return;
}
- if (async_command_editing_p && !sync_execution)
+ if (ui->command_editing && ui->prompt_state != PROMPT_BLOCKED)
gdb_rl_callback_handler_reinstall ();
}
struct thread_info *thr = ecs->event_thread;
if (thr != NULL && thr->thread_fsm != NULL)
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
if (!non_stop)
{
continue;
switch_to_thread (thr->ptid);
- thread_fsm_clean_up (thr->thread_fsm);
+ thread_fsm_clean_up (thr->thread_fsm, thr);
}
if (ecs->event_thread != NULL)
}
}
+/* Helper for all_uis_check_sync_execution_done that works on the
+ current UI. */
+
+static void
+check_curr_ui_sync_execution_done (void)
+{
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPT_NEEDED
+ && ui->async
+ && !gdb_in_secondary_prompt_p (ui))
+ {
+ target_terminal::ours ();
+ gdb::observers::sync_execution_done.notify ();
+ ui_register_input_event_handler (ui);
+ }
+}
+
+/* See infrun.h. */
+
+void
+all_uis_check_sync_execution_done (void)
+{
+ SWITCH_THRU_ALL_UIS ()
+ {
+ check_curr_ui_sync_execution_done ();
+ }
+}
+
+/* See infrun.h. */
+
+void
+all_uis_on_sync_execution_starting (void)
+{
+ SWITCH_THRU_ALL_UIS ()
+ {
+ if (current_ui->prompt_state == PROMPT_NEEDED)
+ async_disable_stdin ();
+ }
+}
+
/* Asynchronous version of wait_for_inferior. It is called by the
event loop whenever a change of state is detected on the file
descriptor corresponding to the target. It can be called more than
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
struct cleanup *ts_old_chain;
- int was_sync = sync_execution;
int cmd_done = 0;
ptid_t waiton_ptid = minus_one_ptid;
memset (ecs, 0, sizeof (*ecs));
+ /* Events are always processed with the main UI as current UI. This
+ way, warnings, debug output, etc. are always consistently sent to
+ the main console. */
+ scoped_restore save_ui = make_scoped_restore (¤t_ui, main_ui);
+
/* End up with readline processing input, if necessary. */
make_cleanup (reinstall_readline_callback_handler_cleanup, NULL);
set_current_traceframe (-1);
}
+ gdb::optional<scoped_restore_current_thread> maybe_restore_thread;
+
if (non_stop)
/* In non-stop mode, the user/frontend should not notice a thread
switch due to internal events. Make sure we reverse to the
user selected thread and frame after handling the event and
running any breakpoint commands. */
- make_cleanup_restore_current_thread ();
+ maybe_restore_thread.emplace ();
overlay_cache_invalid = 1;
/* Flush target cache before starting to handle each event. Target
event. */
target_dcache_invalidate ();
- make_cleanup_restore_integer (&execution_direction);
- execution_direction = target_execution_direction ();
+ scoped_restore save_exec_dir
+ = make_scoped_restore (&execution_direction, target_execution_direction ());
ecs->ptid = do_target_wait (waiton_ptid, &ecs->ws,
target_can_async_p () ? TARGET_WNOHANG : 0);
struct inferior *inf = find_inferior_ptid (ecs->ptid);
int should_stop = 1;
struct thread_info *thr = ecs->event_thread;
+ int should_notify_stop = 1;
delete_just_stopped_threads_infrun_breakpoints ();
struct thread_fsm *thread_fsm = thr->thread_fsm;
if (thread_fsm != NULL)
- should_stop = thread_fsm_should_stop (thread_fsm);
+ should_stop = thread_fsm_should_stop (thread_fsm, thr);
}
if (!should_stop)
{
clean_up_just_stopped_threads_fsms (ecs);
- /* We may not find an inferior if this was a process exit. */
- if (inf == NULL || inf->control.stop_soon == NO_STOP_QUIETLY)
- normal_stop ();
+ if (thr != NULL && thr->thread_fsm != NULL)
+ {
+ should_notify_stop
+ = thread_fsm_should_notify_stop (thr->thread_fsm);
+ }
+
+ if (should_notify_stop)
+ {
+ int proceeded = 0;
- inferior_event_handler (INF_EXEC_COMPLETE, NULL);
- cmd_done = 1;
+ /* We may not find an inferior if this was a process exit. */
+ if (inf == NULL || inf->control.stop_soon == NO_STOP_QUIETLY)
+ proceeded = normal_stop ();
+
+ if (!proceeded)
+ {
+ inferior_event_handler (INF_EXEC_COMPLETE, NULL);
+ cmd_done = 1;
+ }
+ }
}
}
/* Revert thread and frame. */
do_cleanups (old_chain);
- /* If the inferior was in sync execution mode, and now isn't,
- restore the prompt (a synchronous execution command has finished,
- and we're ready for input). */
- if (interpreter_async && was_sync && !sync_execution)
- observer_notify_sync_execution_done ();
+ /* If a UI was in sync execution mode, and now isn't, restore its
+ prompt (a synchronous execution command has finished, and we're
+ ready for input). */
+ all_uis_check_sync_execution_done ();
if (cmd_done
- && !was_sync
&& exec_done_display_p
&& (ptid_equal (inferior_ptid, null_ptid)
|| !is_running (inferior_ptid)))
/* Set the cached copy of the last ptid/waitstatus. */
-static void
+void
set_last_target_status (ptid_t ptid, struct target_waitstatus status)
{
target_last_wait_ptid = ptid;
{
struct regcache *regcache;
struct gdbarch *gdbarch;
- struct address_space *aspace;
CORE_ADDR breakpoint_pc, decr_pc;
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
regcache = get_thread_regcache (thread->ptid);
- gdbarch = get_regcache_arch (regcache);
+ gdbarch = regcache->arch ();
decr_pc = gdbarch_decr_pc_after_break (gdbarch);
if (decr_pc == 0)
return;
- aspace = get_regcache_aspace (regcache);
+ const address_space *aspace = regcache->aspace ();
/* Find the location where (if we've hit a breakpoint) the
breakpoint would be. */
|| (target_is_non_stop_p ()
&& moribund_breakpoint_here_p (aspace, breakpoint_pc)))
{
- struct cleanup *old_cleanups = make_cleanup (null_cleanup, NULL);
+ gdb::optional<scoped_restore_tmpl<int>> restore_operation_disable;
if (record_full_is_used ())
- record_full_gdb_operation_disable_set ();
+ restore_operation_disable.emplace
+ (record_full_gdb_operation_disable_set ());
/* When using hardware single-step, a SIGTRAP is reported for both
a completed single-step and a software breakpoint. Need to
|| (thread->stepped_breakpoint
&& thread->prev_pc == breakpoint_pc))
regcache_write_pc (regcache, breakpoint_pc);
-
- do_cleanups (old_cleanups);
}
}
return 0;
}
+/* If the event thread has the stop requested flag set, pretend it
+ stopped for a GDB_SIGNAL_0 (i.e., as if it stopped due to
+ target_stop). */
+
+static bool
+handle_stop_requested (struct execution_control_state *ecs)
+{
+ if (ecs->event_thread->stop_requested)
+ {
+ ecs->ws.kind = TARGET_WAITKIND_STOPPED;
+ ecs->ws.value.sig = GDB_SIGNAL_0;
+ handle_signal_stop (ecs);
+ return true;
+ }
+ return false;
+}
+
/* Auxiliary function that handles syscall entry/return events.
It returns 1 if the inferior should keep going (and GDB
should ignore the event), or 0 if the event deserves to be
syscall_number);
ecs->event_thread->control.stop_bpstat
- = bpstat_stop_status (get_regcache_aspace (regcache),
+ = bpstat_stop_status (regcache->aspace (),
stop_pc, ecs->ptid, &ecs->ws);
+ if (handle_stop_requested (ecs))
+ return 0;
+
if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
{
/* Catchpoint hit. */
}
}
+ if (handle_stop_requested (ecs))
+ return 0;
+
/* If no catchpoint triggered for this, then keep going. */
keep_going (ecs);
return 1;
static int \
thread_stopped_by_ ## REASON (ptid_t ptid) \
{ \
- struct cleanup *old_chain; \
- int res; \
- \
- old_chain = save_inferior_ptid (); \
+ scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid); \
inferior_ptid = ptid; \
\
- res = target_stopped_by_ ## REASON (); \
- \
- do_cleanups (old_chain); \
- \
- return res; \
+ return target_stopped_by_ ## REASON (); \
}
/* Generate thread_stopped_by_watchpoint. */
save_waitstatus (struct thread_info *tp, struct target_waitstatus *ws)
{
struct regcache *regcache;
- struct address_space *aspace;
if (debug_infrun)
{
- char *statstr;
+ std::string statstr = target_waitstatus_to_string (ws);
- statstr = target_waitstatus_to_string (ws);
fprintf_unfiltered (gdb_stdlog,
"infrun: saving status %s for %d.%ld.%ld\n",
- statstr,
+ statstr.c_str (),
ptid_get_pid (tp->ptid),
ptid_get_lwp (tp->ptid),
ptid_get_tid (tp->ptid));
- xfree (statstr);
}
/* Record for later. */
tp->suspend.waitstatus_pending_p = 1;
regcache = get_thread_regcache (tp->ptid);
- aspace = get_regcache_aspace (regcache);
+ const address_space *aspace = regcache->aspace ();
if (ws->kind == TARGET_WAITKIND_STOPPED
&& ws->value.sig == GDB_SIGNAL_TRAP)
}
}
-/* Stop all threads. */
+/* A cleanup that disables thread create/exit events. */
static void
-stop_all_threads (void)
+disable_thread_events (void *arg)
{
- /* We may need multiple passes to discover all threads. */
- int pass;
- int iterations = 0;
- ptid_t entry_ptid;
+ target_thread_events (0);
+}
+
+/* See infrun.h. */
+
+void
+stop_all_threads (void)
+{
+ /* We may need multiple passes to discover all threads. */
+ int pass;
+ int iterations = 0;
+ ptid_t entry_ptid;
struct cleanup *old_chain;
gdb_assert (target_is_non_stop_p ());
entry_ptid = inferior_ptid;
old_chain = make_cleanup (switch_to_thread_cleanup, &entry_ptid);
+ target_thread_events (1);
+ make_cleanup (disable_thread_events, NULL);
+
/* Request threads to stop, and then wait for the stops. Because
threads we already know about can spawn more threads while we're
trying to stop them, and we only learn about new threads when we
{
/* All resumed threads exited. */
}
- else if (ws.kind == TARGET_WAITKIND_EXITED
+ else if (ws.kind == TARGET_WAITKIND_THREAD_EXITED
+ || ws.kind == TARGET_WAITKIND_EXITED
|| ws.kind == TARGET_WAITKIND_SIGNALLED)
{
if (debug_infrun)
}
else
{
+ struct inferior *inf;
+
t = find_thread_ptid (event_ptid);
if (t == NULL)
t = add_thread (event_ptid);
t->resumed = 0;
t->control.may_range_step = 0;
+ /* This may be the first time we see the inferior report
+ a stop. */
+ inf = find_inferior_ptid (event_ptid);
+ if (inf->needs_setup)
+ {
+ switch_to_thread_no_regs (t);
+ setup_inferior (0);
+ }
+
if (ws.kind == TARGET_WAITKIND_STOPPED
&& ws.value.sig == GDB_SIGNAL_0)
{
{
enum gdb_signal sig;
struct regcache *regcache;
- struct address_space *aspace;
if (debug_infrun)
{
- char *statstr;
+ std::string statstr = target_waitstatus_to_string (&ws);
- statstr = target_waitstatus_to_string (&ws);
fprintf_unfiltered (gdb_stdlog,
"infrun: target_wait %s, saving "
"status for %d.%ld.%ld\n",
- statstr,
+ statstr.c_str (),
ptid_get_pid (t->ptid),
ptid_get_lwp (t->ptid),
ptid_get_tid (t->ptid));
- xfree (statstr);
}
/* Record for later. */
fprintf_unfiltered (gdb_stdlog, "infrun: stop_all_threads done\n");
}
+/* Handle a TARGET_WAITKIND_NO_RESUMED event. */
+
+static int
+handle_no_resumed (struct execution_control_state *ecs)
+{
+ struct inferior *inf;
+ struct thread_info *thread;
+
+ if (target_can_async_p ())
+ {
+ struct ui *ui;
+ int any_sync = 0;
+
+ ALL_UIS (ui)
+ {
+ if (ui->prompt_state == PROMPT_BLOCKED)
+ {
+ any_sync = 1;
+ break;
+ }
+ }
+ if (!any_sync)
+ {
+ /* There were no unwaited-for children left in the target, but,
+ we're not synchronously waiting for events either. Just
+ ignore. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: bg)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Otherwise, if we were running a synchronous execution command, we
+ may need to cancel it and give the user back the terminal.
+
+ In non-stop mode, the target can't tell whether we've already
+ consumed previous stop events, so it can end up sending us a
+ no-resumed event like so:
+
+ #0 - thread 1 is left stopped
+
+ #1 - thread 2 is resumed and hits breakpoint
+ -> TARGET_WAITKIND_STOPPED
+
+ #2 - thread 3 is resumed and exits
+ this is the last resumed thread, so
+ -> TARGET_WAITKIND_NO_RESUMED
+
+ #3 - gdb processes stop for thread 2 and decides to re-resume
+ it.
+
+ #4 - gdb processes the TARGET_WAITKIND_NO_RESUMED event.
+ thread 2 is now resumed, so the event should be ignored.
+
+ IOW, if the stop for thread 2 doesn't end a foreground command,
+ then we need to ignore the following TARGET_WAITKIND_NO_RESUMED
+ event. But it could be that the event meant that thread 2 itself
+ (or whatever other thread was the last resumed thread) exited.
+
+ To address this we refresh the thread list and check whether we
+ have resumed threads _now_. In the example above, this removes
+ thread 3 from the thread list. If thread 2 was re-resumed, we
+ ignore this event. If we find no thread resumed, then we cancel
+ the synchronous command show "no unwaited-for " to the user. */
+ update_thread_list ();
+
+ ALL_NON_EXITED_THREADS (thread)
+ {
+ if (thread->executing
+ || thread->suspend.waitstatus_pending_p)
+ {
+ /* There were no unwaited-for children left in the target at
+ some point, but there are now. Just ignore. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(ignoring: found resumed)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Note however that we may find no resumed thread because the whole
+ process exited meanwhile (thus updating the thread list results
+ in an empty thread list). In this case we know we'll be getting
+ a process exit event shortly. */
+ ALL_INFERIORS (inf)
+ {
+ if (inf->pid == 0)
+ continue;
+
+ thread = any_live_thread_of_process (inf->pid);
+ if (thread == NULL)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_NO_RESUMED "
+ "(expect process exit)\n");
+ prepare_to_wait (ecs);
+ return 1;
+ }
+ }
+
+ /* Go ahead and report the event. */
+ return 0;
+}
+
/* Given an execution control state that has been freshly filled in by
an event from the inferior, figure out what it means and take
appropriate action.
return;
}
- if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
- && target_can_async_p () && !sync_execution)
+ if (ecs->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
{
- /* There were no unwaited-for children left in the target, but,
- we're not synchronously waiting for events either. Just
- ignore. Otherwise, if we were running a synchronous
- execution command, we need to cancel it and give the user
- back the terminal. */
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: TARGET_WAITKIND_NO_RESUMED (ignoring)\n");
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_EXITED\n");
prepare_to_wait (ecs);
return;
}
+ if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
+ && handle_no_resumed (ecs))
+ return;
+
/* Cache the last pid/waitstatus. */
set_last_target_status (ecs->ptid, ecs->ws);
{
struct regcache *regcache = get_thread_regcache (ecs->ptid);
- if (breakpoint_inserted_here_p (get_regcache_aspace (regcache),
+ if (breakpoint_inserted_here_p (regcache->aspace (),
regcache_read_pc (regcache)))
{
if (debug_infrun)
handle_solib_event ();
ecs->event_thread->control.stop_bpstat
- = bpstat_stop_status (get_regcache_aspace (regcache),
+ = bpstat_stop_status (regcache->aspace (),
stop_pc, ecs->ptid, &ecs->ws);
+ if (handle_stop_requested (ecs))
+ return;
+
if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
{
/* A catchpoint triggered. */
case TARGET_WAITKIND_SPURIOUS:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
+ if (handle_stop_requested (ecs))
+ return;
if (!ptid_equal (ecs->ptid, inferior_ptid))
context_switch (ecs->ptid);
resume (GDB_SIGNAL_0);
prepare_to_wait (ecs);
return;
+ case TARGET_WAITKIND_THREAD_CREATED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_THREAD_CREATED\n");
+ if (handle_stop_requested (ecs))
+ return;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ if (!switch_back_to_stepped_thread (ecs))
+ keep_going (ecs);
+ return;
+
case TARGET_WAITKIND_EXITED:
case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
set_current_inferior (find_inferior_ptid (ecs->ptid));
set_current_program_space (current_inferior ()->pspace);
handle_vfork_child_exec_or_exit (0);
- target_terminal_ours (); /* Must do this before mourn anyway. */
+ target_terminal::ours (); /* Must do this before mourn anyway. */
/* Clearing any previous state of convenience variables. */
clear_exit_convenience_vars ();
/* Support the --return-child-result option. */
return_child_result_value = ecs->ws.value.integer;
- observer_notify_exited (ecs->ws.value.integer);
+ gdb::observers::exited.notify (ecs->ws.value.integer);
}
else
{
struct regcache *regcache = get_thread_regcache (ecs->ptid);
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
if (gdbarch_gdb_signal_to_target_p (gdbarch))
{
Cannot fill $_exitsignal with the correct signal number.\n"));
}
- observer_notify_signal_exited (ecs->ws.value.sig);
+ gdb::observers::signal_exited.notify (ecs->ws.value.sig);
}
gdb_flush (gdb_stdout);
- target_mourn_inferior ();
+ target_mourn_inferior (inferior_ptid);
stop_print_frame = 0;
stop_waiting (ecs);
return;
/* Check whether the inferior is displaced stepping. */
{
struct regcache *regcache = get_thread_regcache (ecs->ptid);
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct displaced_step_inferior_state *displaced
- = get_displaced_stepping_state (ptid_get_pid (ecs->ptid));
+ struct gdbarch *gdbarch = regcache->arch ();
/* If checking displaced stepping is supported, and thread
ecs->ptid is displaced stepping. */
- if (displaced && ptid_equal (displaced->step_ptid, ecs->ptid))
+ if (displaced_step_in_progress_thread (ecs->ptid))
{
struct inferior *parent_inf
= find_inferior_ptid (ecs->ptid);
if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
{
+ struct displaced_step_inferior_state *displaced
+ = get_displaced_stepping_state (ptid_get_pid (ecs->ptid));
+
/* Restore scratch pad for child process. */
displaced_step_restore (displaced, ecs->ws.value.related_pid);
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
ecs->event_thread->control.stop_bpstat
- = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
+ = bpstat_stop_status (get_current_regcache ()->aspace (),
stop_pc, ecs->ptid, &ecs->ws);
+ if (handle_stop_requested (ecs))
+ return;
+
/* If no catchpoint triggered for this, then keep going. Note
that we're interested in knowing the bpstat actually causes a
stop, not just if it may explain the signal. Software
parent = ecs->ptid;
child = ecs->ws.value.related_pid;
+ /* At this point, the parent is marked running, and the
+ child is marked stopped. */
+
+ /* If not resuming the parent, mark it stopped. */
+ if (follow_child && !detach_fork && !non_stop && !sched_multi)
+ set_running (parent, 0);
+
+ /* If resuming the child, mark it running. */
+ if (follow_child || (!detach_fork && (non_stop || sched_multi)))
+ set_running (child, 1);
+
/* In non-stop mode, also resume the other branch. */
if (!detach_fork && (non_stop
|| (sched_multi && target_is_non_stop_p ())))
current_inferior ()->waiting_for_vfork_done = 0;
current_inferior ()->pspace->breakpoints_not_allowed = 0;
+
+ if (handle_stop_requested (ecs))
+ return;
+
/* This also takes care of reinserting breakpoints in the
previously locked inferior. */
keep_going (ecs);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
+ /* Note we can't read registers yet (the stop_pc), because we
+ don't yet know the inferior's post-exec architecture.
+ 'stop_pc' is explicitly read below instead. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
- context_switch (ecs->ptid);
-
- stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
+ switch_to_thread_no_regs (ecs->event_thread);
/* Do whatever is necessary to the parent branch of the vfork. */
handle_vfork_child_exec_or_exit (1);
stop. */
follow_exec (inferior_ptid, ecs->ws.value.execd_pathname);
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
+
/* In follow_exec we may have deleted the original thread and
created a new one. Make sure that the event thread is the
execd thread for that case (this is a nop otherwise). */
ecs->event_thread = inferior_thread ();
ecs->event_thread->control.stop_bpstat
- = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
+ = bpstat_stop_status (get_current_regcache ()->aspace (),
stop_pc, ecs->ptid, &ecs->ws);
/* Note that this may be referenced from inside
xfree (ecs->ws.value.execd_pathname);
ecs->ws.value.execd_pathname = NULL;
+ if (handle_stop_requested (ecs))
+ return;
+
/* If no catchpoint triggered for this, then keep going. */
if (!bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
{
case TARGET_WAITKIND_STOPPED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
- ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig;
handle_signal_stop (ecs);
return;
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_NO_HISTORY\n");
/* Reverse execution: target ran out of history info. */
+ /* Switch to the stopped thread. */
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ context_switch (ecs->ptid);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
+
delete_just_stopped_threads_single_step_breakpoints ();
- stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
- observer_notify_no_history ();
+ stop_pc = regcache_read_pc (get_thread_regcache (inferior_ptid));
+
+ if (handle_stop_requested (ecs))
+ return;
+
+ gdb::observers::no_history.notify ();
stop_waiting (ecs);
return;
}
restart_threads (struct thread_info *event_thread)
{
struct thread_info *tp;
- struct thread_info *step_over = NULL;
/* In case the instruction just stepped spawned a new thread. */
update_thread_list ();
continue;
}
+ gdb_assert (!tp->stop_requested);
+
/* If some thread needs to start a step-over at this point, it
should still be in the step-over queue, and thus skipped
above. */
back an event. */
gdb_assert (ecs->event_thread->control.trap_expected);
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
- clear_step_over_info ();
+ clear_step_over_info ();
}
if (!target_is_non_stop_p ())
gdb_assert (ecs->ws.kind == TARGET_WAITKIND_STOPPED);
+ ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig;
+
/* Do we need to clean up the state of a thread that has
completed a displaced single-step? (Doing so usually affects
the PC, so do it here, before we set stop_pc.) */
if (debug_infrun)
{
struct regcache *regcache = get_thread_regcache (ecs->ptid);
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct cleanup *old_chain = save_inferior_ptid ();
+ struct gdbarch *gdbarch = regcache->arch ();
+ scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid);
inferior_ptid = ecs->ptid;
fprintf_unfiltered (gdb_stdlog,
"infrun: (no data address available)\n");
}
-
- do_cleanups (old_chain);
}
/* This is originated from start_remote(), start_inferior() and
return;
}
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
- && stop_after_trap)
- {
- if (!ptid_equal (ecs->ptid, inferior_ptid))
- context_switch (ecs->ptid);
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
- stop_print_frame = 0;
- stop_waiting (ecs);
- return;
- }
-
/* This originates from attach_command(). We need to overwrite
the stop_signal here, because some kernels don't ignore a
SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
context_switch (ecs->ptid);
if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (ecs->ptid));
+ deprecated_context_hook (ptid_to_global_thread_id (ecs->ptid));
}
/* At this point, get hold of the now-current thread's frame. */
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
{
struct regcache *regcache;
- struct address_space *aspace;
CORE_ADDR pc;
regcache = get_thread_regcache (ecs->ptid);
- aspace = get_regcache_aspace (regcache);
+ const address_space *aspace = regcache->aspace ();
+
pc = regcache_read_pc (regcache);
/* However, before doing so, if this single-step breakpoint was
inline function call sites). */
if (ecs->event_thread->control.step_range_end != 1)
{
- struct address_space *aspace =
- get_regcache_aspace (get_thread_regcache (ecs->ptid));
+ const address_space *aspace =
+ get_thread_regcache (ecs->ptid)->aspace ();
/* skip_inline_frames is expensive, so we avoid it if we can
determine that the address is one where functions cannot have
/* See if there is a breakpoint/watchpoint/catchpoint/etc. that
handles this event. */
ecs->event_thread->control.stop_bpstat
- = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
+ = bpstat_stop_status (get_current_regcache ()->aspace (),
stop_pc, ecs->ptid, &ecs->ws);
/* Following in case break condition called a
decr_pc = gdbarch_decr_pc_after_break (gdbarch);
if (decr_pc != 0)
{
- struct cleanup *old_cleanups = make_cleanup (null_cleanup, NULL);
+ gdb::optional<scoped_restore_tmpl<int>>
+ restore_operation_disable;
if (record_full_is_used ())
- record_full_gdb_operation_disable_set ();
+ restore_operation_disable.emplace
+ (record_full_gdb_operation_disable_set ());
regcache_write_pc (regcache, stop_pc + decr_pc);
-
- do_cleanups (old_cleanups);
}
}
else
if (random_signal)
random_signal = !stopped_by_watchpoint;
+ /* Always stop if the user explicitly requested this thread to
+ remain stopped. */
+ if (ecs->event_thread->stop_requested)
+ {
+ random_signal = 1;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: user-requested stop\n");
+ }
+
/* For the program's own signals, act according to
the signal handling tables. */
if (signal_print[ecs->event_thread->suspend.stop_signal])
{
/* The signal table tells us to print about this signal. */
- target_terminal_ours_for_output ();
- observer_notify_signal_received (ecs->event_thread->suspend.stop_signal);
- target_terminal_inferior ();
+ target_terminal::ours_for_output ();
+ gdb::observers::signal_received.notify (ecs->event_thread->suspend.stop_signal);
+ target_terminal::inferior ();
}
/* Clear the signal if it should not be passed. */
&& ecs->event_thread->control.trap_expected
&& ecs->event_thread->control.step_resume_breakpoint == NULL)
{
- int was_in_line;
-
/* We were just starting a new sequence, attempting to
single-step off of a breakpoint and expecting a SIGTRAP.
Instead this signal arrives. This signal will take us out
"infrun: signal arrived while stepping over "
"breakpoint\n");
- was_in_line = step_over_info_valid_p ();
- clear_step_over_info ();
insert_hp_step_resume_breakpoint_at_frame (frame);
ecs->event_thread->step_after_step_resume_breakpoint = 1;
/* Reset trap_expected to ensure breakpoints are re-inserted. */
ecs->event_thread->control.trap_expected = 0;
- if (target_is_non_stop_p ())
- {
- /* Either "set non-stop" is "on", or the target is
- always in non-stop mode. In this case, we have a bit
- more work to do. Resume the current thread, and if
- we had paused all threads, restart them while the
- signal handler runs. */
- keep_going (ecs);
-
- if (was_in_line)
- {
- restart_threads (ecs->event_thread);
- }
- else if (debug_infrun)
- {
- fprintf_unfiltered (gdb_stdlog,
- "infrun: no need to restart threads\n");
- }
- return;
- }
-
/* If we were nexting/stepping some other thread, switch to
it, so that we don't continue it, losing control. */
if (!switch_back_to_stepped_thread (ecs))
{
/* Set up a step-resume breakpoint at the address
indicated by SKIP_SOLIB_RESOLVER. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = pc_after_resolver;
sr_sal.pspace = get_frame_program_space (frame);
if (real_stop_pc)
{
/* And put the step-breakpoint there and go until there. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal); /* initialize to zeroes */
+ symtab_and_line sr_sal;
sr_sal.pc = real_stop_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
sr_sal.pspace = get_frame_program_space (frame);
to the caller. */
if (ecs->stop_func_start != stop_pc && ecs->stop_func_start != 0)
{
- struct symtab_and_line sr_sal;
-
/* Normal function call return (static or dynamic). */
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = ecs->stop_func_start;
sr_sal.pspace = get_frame_program_space (frame);
insert_step_resume_breakpoint_at_sal (gdbarch,
if (real_stop_pc != 0 && in_solib_dynsym_resolve_code (real_stop_pc))
{
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = ecs->stop_func_start;
sr_sal.pspace = get_frame_program_space (frame);
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
if (tmp_sal.line != 0
&& !function_name_is_marked_for_skip (ecs->stop_func_name,
- &tmp_sal))
+ tmp_sal))
{
if (execution_direction == EXEC_REVERSE)
handle_step_into_function_backward (gdbarch, ecs);
{
/* Set a breakpoint at callee's start address.
From there we can step once and be back in the caller. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = ecs->stop_func_start;
sr_sal.pspace = get_frame_program_space (frame);
insert_step_resume_breakpoint_at_sal (gdbarch,
/* Stepped backward into the solib dynsym resolver.
Set a breakpoint at its start and continue, then
one more step will take us out. */
- struct symtab_and_line sr_sal;
-
- init_sal (&sr_sal);
+ symtab_and_line sr_sal;
sr_sal.pc = ecs->stop_func_start;
sr_sal.pspace = get_frame_program_space (frame);
insert_step_resume_breakpoint_at_sal (gdbarch,
ecs->event_thread->control.step_frame_id)
&& inline_skipped_frames (ecs->ptid))
{
- struct symtab_and_line call_sal;
-
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: stepped into inlined function\n");
- find_frame_sal (get_current_frame (), &call_sal);
+ symtab_and_line call_sal = find_frame_sal (get_current_frame ());
if (ecs->event_thread->control.step_over_calls != STEP_OVER_ALL)
{
keep_going_stepped_thread (struct thread_info *tp)
{
struct frame_info *frame;
- struct gdbarch *gdbarch;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
stop_pc = regcache_read_pc (get_thread_regcache (tp->ptid));
frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
/* If the PC of the thread we were trying to single-step has
changed, then that thread has trapped or been signaled, but the
handle_step_into_function (struct gdbarch *gdbarch,
struct execution_control_state *ecs)
{
- struct compunit_symtab *cust;
- struct symtab_and_line stop_func_sal, sr_sal;
-
fill_in_stop_func (gdbarch, ecs);
- cust = find_pc_compunit_symtab (stop_pc);
+ compunit_symtab *cust = find_pc_compunit_symtab (stop_pc);
if (cust != NULL && compunit_language (cust) != language_asm)
- ecs->stop_func_start = gdbarch_skip_prologue (gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start
+ = gdbarch_skip_prologue_noexcept (gdbarch, ecs->stop_func_start);
- stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
+ symtab_and_line stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
even if that involves jumps (as it seems to on the vax under
4.2). */
else
{
/* Put the step-breakpoint there and go until there. */
- init_sal (&sr_sal); /* initialize to zeroes */
+ symtab_and_line sr_sal;
sr_sal.pc = ecs->stop_func_start;
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
sr_sal.pspace = get_frame_program_space (get_current_frame ());
cust = find_pc_compunit_symtab (stop_pc);
if (cust != NULL && compunit_language (cust) != language_asm)
- ecs->stop_func_start = gdbarch_skip_prologue (gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start
+ = gdbarch_skip_prologue_noexcept (gdbarch, ecs->stop_func_start);
stop_func_sal = find_pc_line (stop_pc, 0);
paddress (gdbarch, sr_sal.pc));
inferior_thread ()->control.step_resume_breakpoint
- = set_momentary_breakpoint (gdbarch, sr_sal, sr_id, sr_type);
+ = set_momentary_breakpoint (gdbarch, sr_sal, sr_id, sr_type).release ();
}
void
static void
insert_hp_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
{
- struct symtab_and_line sr_sal;
- struct gdbarch *gdbarch;
-
gdb_assert (return_frame != NULL);
- init_sal (&sr_sal); /* initialize to zeros */
- gdbarch = get_frame_arch (return_frame);
+ struct gdbarch *gdbarch = get_frame_arch (return_frame);
+
+ symtab_and_line sr_sal;
sr_sal.pc = gdbarch_addr_bits_remove (gdbarch, get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
sr_sal.pspace = get_frame_program_space (return_frame);
static void
insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
{
- struct symtab_and_line sr_sal;
- struct gdbarch *gdbarch;
-
/* We shouldn't have gotten here if we don't know where the call site
is. */
gdb_assert (frame_id_p (frame_unwind_caller_id (next_frame)));
- init_sal (&sr_sal); /* initialize to zeros */
+ struct gdbarch *gdbarch = frame_unwind_caller_arch (next_frame);
- gdbarch = frame_unwind_caller_arch (next_frame);
+ symtab_and_line sr_sal;
sr_sal.pc = gdbarch_addr_bits_remove (gdbarch,
frame_unwind_caller_pc (next_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
paddress (gdbarch, pc));
inferior_thread ()->control.exception_resume_breakpoint =
- set_momentary_breakpoint_at_pc (gdbarch, pc, bp_longjmp_resume);
+ set_momentary_breakpoint_at_pc (gdbarch, pc, bp_longjmp_resume).release ();
}
/* Insert an exception resume breakpoint. TP is the thread throwing
CORE_ADDR handler;
struct breakpoint *bp;
- vsym = lookup_symbol (SYMBOL_LINKAGE_NAME (sym), b, VAR_DOMAIN, NULL);
+ vsym = lookup_symbol_search_name (SYMBOL_SEARCH_NAME (sym),
+ b, VAR_DOMAIN);
value = read_var_value (vsym.symbol, vsym.block, frame);
/* If the value was optimized out, revert to the old behavior. */
if (! value_optimized_out (value))
(unsigned long) handler);
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
- handler, bp_exception_resume);
+ handler,
+ bp_exception_resume).release ();
/* set_momentary_breakpoint_at_pc invalidates FRAME. */
frame = NULL;
- bp->thread = tp->num;
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
}
handler));
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
- handler, bp_exception_resume);
- bp->thread = tp->num;
+ handler, bp_exception_resume).release ();
+ bp->thread = tp->global_num;
inferior_thread ()->control.exception_resume_breakpoint = bp;
}
CFA and the HANDLER. We ignore the CFA, extract the handler, and
set a breakpoint there. */
probe = find_probe_by_pc (get_frame_pc (frame));
- if (probe.probe)
+ if (probe.prob)
{
insert_exception_resume_from_probe (ecs->event_thread, &probe, frame);
return;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stop_waiting\n");
- clear_step_over_info ();
-
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
static void
keep_going_pass_signal (struct execution_control_state *ecs)
{
- /* Make sure normal_stop is called if we get a QUIT handled before
- reaching resume. */
- struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
-
gdb_assert (ptid_equal (ecs->event_thread->ptid, inferior_ptid));
gdb_assert (!ecs->event_thread->resumed);
non-signal event (e.g., a fork); or took a signal which we
are supposed to pass through to the inferior. Simply
continue. */
- discard_cleanups (old_cleanups);
resume (ecs->event_thread->suspend.stop_signal);
}
else if (step_over_info_valid_p ())
"resume of %s deferred\n",
target_pid_to_str (tp->ptid));
}
-
- discard_cleanups (old_cleanups);
}
else
{
struct regcache *regcache = get_current_regcache ();
int remove_bp;
int remove_wps;
- enum step_over_what step_what;
+ step_over_what step_what;
/* Either the trap was not expected, but we are continuing
anyway (if we got a signal, the user asked it be passed to
if (remove_bp
&& (remove_wps || !use_displaced_stepping (ecs->event_thread)))
{
- set_step_over_info (get_regcache_aspace (regcache),
- regcache_read_pc (regcache), remove_wps);
+ set_step_over_info (regcache->aspace (),
+ regcache_read_pc (regcache), remove_wps,
+ ecs->event_thread->global_num);
}
else if (remove_wps)
- set_step_over_info (NULL, 0, remove_wps);
+ set_step_over_info (NULL, 0, remove_wps, -1);
/* If we now need to do an in-line step-over, we need to stop
all other threads. Note this must be done before
{
exception_print (gdb_stderr, e);
stop_waiting (ecs);
- discard_cleanups (old_cleanups);
+ clear_step_over_info ();
return;
}
END_CATCH
ecs->event_thread->control.trap_expected = (remove_bp || remove_wps);
- discard_cleanups (old_cleanups);
resume (ecs->event_thread->suspend.stop_signal);
}
{
/* For CLI-like interpreters, print nothing. */
- if (ui_out_is_mi_like_p (uiout))
+ if (uiout->is_mi_like_p ())
{
- ui_out_field_string (uiout, "reason",
+ uiout->field_string ("reason",
async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
}
}
print_signal_exited_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
annotate_signalled ();
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
- ui_out_text (uiout, "\nProgram terminated with signal ");
+ if (uiout->is_mi_like_p ())
+ uiout->field_string
+ ("reason", async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
+ uiout->text ("\nProgram terminated with signal ");
annotate_signal_name ();
- ui_out_field_string (uiout, "signal-name",
+ uiout->field_string ("signal-name",
gdb_signal_to_name (siggnal));
annotate_signal_name_end ();
- ui_out_text (uiout, ", ");
+ uiout->text (", ");
annotate_signal_string ();
- ui_out_field_string (uiout, "signal-meaning",
+ uiout->field_string ("signal-meaning",
gdb_signal_to_string (siggnal));
annotate_signal_string_end ();
- ui_out_text (uiout, ".\n");
- ui_out_text (uiout, "The program no longer exists.\n");
+ uiout->text (".\n");
+ uiout->text ("The program no longer exists.\n");
}
void
annotate_exited (exitstatus);
if (exitstatus)
{
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason",
- async_reason_lookup (EXEC_ASYNC_EXITED));
- ui_out_text (uiout, "[Inferior ");
- ui_out_text (uiout, plongest (inf->num));
- ui_out_text (uiout, " (");
- ui_out_text (uiout, pidstr);
- ui_out_text (uiout, ") exited with code ");
- ui_out_field_fmt (uiout, "exit-code", "0%o", (unsigned int) exitstatus);
- ui_out_text (uiout, "]\n");
+ if (uiout->is_mi_like_p ())
+ uiout->field_string ("reason", async_reason_lookup (EXEC_ASYNC_EXITED));
+ uiout->text ("[Inferior ");
+ uiout->text (plongest (inf->num));
+ uiout->text (" (");
+ uiout->text (pidstr);
+ uiout->text (") exited with code ");
+ uiout->field_fmt ("exit-code", "0%o", (unsigned int) exitstatus);
+ uiout->text ("]\n");
}
else
{
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
- ui_out_text (uiout, "[Inferior ");
- ui_out_text (uiout, plongest (inf->num));
- ui_out_text (uiout, " (");
- ui_out_text (uiout, pidstr);
- ui_out_text (uiout, ") exited normally]\n");
+ if (uiout->is_mi_like_p ())
+ uiout->field_string
+ ("reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
+ uiout->text ("[Inferior ");
+ uiout->text (plongest (inf->num));
+ uiout->text (" (");
+ uiout->text (pidstr);
+ uiout->text (") exited normally]\n");
}
}
+/* Some targets/architectures can do extra processing/display of
+ segmentation faults. E.g., Intel MPX boundary faults.
+ Call the architecture dependent function to handle the fault. */
+
+static void
+handle_segmentation_fault (struct ui_out *uiout)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = regcache->arch ();
+
+ if (gdbarch_handle_segmentation_fault_p (gdbarch))
+ gdbarch_handle_segmentation_fault (gdbarch, uiout);
+}
+
void
print_signal_received_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
+ struct thread_info *thr = inferior_thread ();
+
annotate_signal ();
- if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
+ if (uiout->is_mi_like_p ())
+ ;
+ else if (show_thread_that_caused_stop ())
{
- struct thread_info *t = inferior_thread ();
+ const char *name;
- ui_out_text (uiout, "\n[");
- ui_out_field_string (uiout, "thread-name",
- target_pid_to_str (t->ptid));
- ui_out_field_fmt (uiout, "thread-id", "] #%d", t->num);
- ui_out_text (uiout, " stopped");
+ uiout->text ("\nThread ");
+ uiout->field_fmt ("thread-id", "%s", print_thread_id (thr));
+
+ name = thr->name != NULL ? thr->name : target_thread_name (thr);
+ if (name != NULL)
+ {
+ uiout->text (" \"");
+ uiout->field_fmt ("name", "%s", name);
+ uiout->text ("\"");
+ }
}
+ else
+ uiout->text ("\nProgram");
+
+ if (siggnal == GDB_SIGNAL_0 && !uiout->is_mi_like_p ())
+ uiout->text (" stopped");
else
{
- ui_out_text (uiout, "\nProgram received signal ");
+ uiout->text (" received signal ");
annotate_signal_name ();
- if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string
- (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
- ui_out_field_string (uiout, "signal-name",
- gdb_signal_to_name (siggnal));
+ if (uiout->is_mi_like_p ())
+ uiout->field_string
+ ("reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
+ uiout->field_string ("signal-name", gdb_signal_to_name (siggnal));
annotate_signal_name_end ();
- ui_out_text (uiout, ", ");
+ uiout->text (", ");
annotate_signal_string ();
- ui_out_field_string (uiout, "signal-meaning",
- gdb_signal_to_string (siggnal));
+ uiout->field_string ("signal-meaning", gdb_signal_to_string (siggnal));
+
+ if (siggnal == GDB_SIGNAL_SEGV)
+ handle_segmentation_fault (uiout);
+
annotate_signal_string_end ();
}
- ui_out_text (uiout, ".\n");
+ uiout->text (".\n");
}
void
print_no_history_reason (struct ui_out *uiout)
{
- ui_out_text (uiout, "\nNo more reverse-execution history.\n");
+ uiout->text ("\nNo more reverse-execution history.\n");
}
/* Print current location without a level number, if we have changed
print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
}
-/* Cleanup that restores a previous current uiout. */
-
-static void
-restore_current_uiout_cleanup (void *arg)
-{
- struct ui_out *saved_uiout = arg;
-
- current_uiout = saved_uiout;
-}
-
/* See infrun.h. */
void
print_stop_event (struct ui_out *uiout)
{
- struct cleanup *old_chain;
struct target_waitstatus last;
ptid_t last_ptid;
struct thread_info *tp;
get_last_target_status (&last_ptid, &last);
- old_chain = make_cleanup (restore_current_uiout_cleanup, current_uiout);
- current_uiout = uiout;
-
- print_stop_location (&last);
+ {
+ scoped_restore save_uiout = make_scoped_restore (¤t_uiout, uiout);
- /* Display the auto-display expressions. */
- do_displays ();
+ print_stop_location (&last);
- do_cleanups (old_chain);
+ /* Display the auto-display expressions. */
+ do_displays ();
+ }
tp = inferior_thread ();
if (tp->thread_fsm != NULL
}
}
-/* Here to return control to GDB when the inferior stops for real.
- Print appropriate messages, remove breakpoints, give terminal our modes.
-
- STOP_PRINT_FRAME nonzero means print the executing frame
- (pc, function, args, file, line number and line text).
- BREAKPOINTS_FAILED nonzero means stop was due to error
- attempting to insert breakpoints. */
+/* See infrun.h. */
void
+maybe_remove_breakpoints (void)
+{
+ if (!breakpoints_should_be_inserted_now () && target_has_execution)
+ {
+ if (remove_breakpoints ())
+ {
+ target_terminal::ours_for_output ();
+ printf_filtered (_("Cannot remove breakpoints because "
+ "program is no longer writable.\nFurther "
+ "execution is probably impossible.\n"));
+ }
+ }
+}
+
+/* The execution context that just caused a normal stop. */
+
+struct stop_context
+{
+ /* The stop ID. */
+ ULONGEST stop_id;
+
+ /* The event PTID. */
+
+ ptid_t ptid;
+
+ /* If stopp for a thread event, this is the thread that caused the
+ stop. */
+ struct thread_info *thread;
+
+ /* The inferior that caused the stop. */
+ int inf_num;
+};
+
+/* Returns a new stop context. If stopped for a thread event, this
+ takes a strong reference to the thread. */
+
+static struct stop_context *
+save_stop_context (void)
+{
+ struct stop_context *sc = XNEW (struct stop_context);
+
+ sc->stop_id = get_stop_id ();
+ sc->ptid = inferior_ptid;
+ sc->inf_num = current_inferior ()->num;
+
+ if (!ptid_equal (inferior_ptid, null_ptid))
+ {
+ /* Take a strong reference so that the thread can't be deleted
+ yet. */
+ sc->thread = inferior_thread ();
+ sc->thread->incref ();
+ }
+ else
+ sc->thread = NULL;
+
+ return sc;
+}
+
+/* Release a stop context previously created with save_stop_context.
+ Releases the strong reference to the thread as well. */
+
+static void
+release_stop_context_cleanup (void *arg)
+{
+ struct stop_context *sc = (struct stop_context *) arg;
+
+ if (sc->thread != NULL)
+ sc->thread->decref ();
+ xfree (sc);
+}
+
+/* Return true if the current context no longer matches the saved stop
+ context. */
+
+static int
+stop_context_changed (struct stop_context *prev)
+{
+ if (!ptid_equal (prev->ptid, inferior_ptid))
+ return 1;
+ if (prev->inf_num != current_inferior ()->num)
+ return 1;
+ if (prev->thread != NULL && prev->thread->state != THREAD_STOPPED)
+ return 1;
+ if (get_stop_id () != prev->stop_id)
+ return 1;
+ return 0;
+}
+
+/* See infrun.h. */
+
+int
normal_stop (void)
{
struct target_waitstatus last;
get_last_target_status (&last_ptid, &last);
+ new_stop_id ();
+
/* If an exception is thrown from this point on, make sure to
propagate GDB's knowledge of the executing state to the
frontend/user running state. A QUIT is an easy exception to see
update_thread_list ();
if (last.kind == TARGET_WAITKIND_STOPPED && stopped_by_random_signal)
- observer_notify_signal_received (inferior_thread ()->suspend.stop_signal);
+ gdb::observers::signal_received.notify (inferior_thread ()->suspend.stop_signal);
/* As with the notification of thread events, we want to delay
notifying the user that we've switched thread context until
&& last.kind != TARGET_WAITKIND_EXITED
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
{
- target_terminal_ours_for_output ();
- printf_filtered (_("[Switching to %s]\n"),
- target_pid_to_str (inferior_ptid));
- annotate_thread_changed ();
+ SWITCH_THRU_ALL_UIS ()
+ {
+ target_terminal::ours_for_output ();
+ printf_filtered (_("[Switching to %s]\n"),
+ target_pid_to_str (inferior_ptid));
+ annotate_thread_changed ();
+ }
previous_inferior_ptid = inferior_ptid;
}
if (last.kind == TARGET_WAITKIND_NO_RESUMED)
{
- gdb_assert (sync_execution || !target_can_async_p ());
-
- target_terminal_ours_for_output ();
- printf_filtered (_("No unwaited-for children left.\n"));
+ SWITCH_THRU_ALL_UIS ()
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
+ {
+ target_terminal::ours_for_output ();
+ printf_filtered (_("No unwaited-for children left.\n"));
+ }
}
/* Note: this depends on the update_thread_list call above. */
- if (!breakpoints_should_be_inserted_now () && target_has_execution)
- {
- if (remove_breakpoints ())
- {
- target_terminal_ours_for_output ();
- printf_filtered (_("Cannot remove breakpoints because "
- "program is no longer writable.\nFurther "
- "execution is probably impossible.\n"));
- }
- }
+ maybe_remove_breakpoints ();
/* If an auto-display called a function and that got a signal,
delete that auto-display to avoid an infinite recursion. */
if (stopped_by_random_signal)
disable_current_display ();
- target_terminal_ours ();
- async_enable_stdin ();
-
- /* Set the current source location. This will also happen if we
- display the frame below, but the current SAL will be incorrect
- during a user hook-stop function. */
- if (has_stack_frames () && !stop_stack_dummy)
- set_current_sal_from_frame (get_current_frame ());
-
- /* Let the user/frontend see the threads as stopped, but defer to
- call_function_by_hand if the thread finished an infcall
- successfully. We may be e.g., evaluating a breakpoint condition.
- In that case, the thread had state THREAD_RUNNING before the
- infcall, and shall remain marked running, all without informing
- the user/frontend about state transition changes. */
- if (target_has_execution
- && inferior_thread ()->control.in_infcall
- && stop_stack_dummy == STOP_STACK_DUMMY)
- discard_cleanups (old_chain);
- else
- do_cleanups (old_chain);
+ SWITCH_THRU_ALL_UIS ()
+ {
+ async_enable_stdin ();
+ }
- /* Look up the hook_stop and run it (CLI internally handles problem
- of stop_command's pre-hook not existing). */
- if (stop_command)
- catch_errors (hook_stop_stub, stop_command,
- "Error while running hook_stop:\n", RETURN_MASK_ALL);
+ /* Let the user/frontend see the threads as stopped. */
+ do_cleanups (old_chain);
- if (!has_stack_frames ())
- goto done;
+ /* Select innermost stack frame - i.e., current frame is frame 0,
+ and current location is based on that. Handle the case where the
+ dummy call is returning after being stopped. E.g. the dummy call
+ previously hit a breakpoint. (If the dummy call returns
+ normally, we won't reach here.) Do this before the stop hook is
+ run, so that it doesn't get to see the temporary dummy frame,
+ which is not where we'll present the stop. */
+ if (has_stack_frames ())
+ {
+ if (stop_stack_dummy == STOP_STACK_DUMMY)
+ {
+ /* Pop the empty frame that contains the stack dummy. This
+ also restores inferior state prior to the call (struct
+ infcall_suspend_state). */
+ struct frame_info *frame = get_current_frame ();
- if (last.kind == TARGET_WAITKIND_SIGNALLED
- || last.kind == TARGET_WAITKIND_EXITED)
- goto done;
+ gdb_assert (get_frame_type (frame) == DUMMY_FRAME);
+ frame_pop (frame);
+ /* frame_pop calls reinit_frame_cache as the last thing it
+ does which means there's now no selected frame. */
+ }
- /* Select innermost stack frame - i.e., current frame is frame 0,
- and current location is based on that.
- Don't do this on return from a stack dummy routine,
- or if the program has exited. */
-
- if (!stop_stack_dummy)
- select_frame (get_current_frame ());
-
- if (stop_stack_dummy == STOP_STACK_DUMMY)
- {
- /* Pop the empty frame that contains the stack dummy.
- This also restores inferior state prior to the call
- (struct infcall_suspend_state). */
- struct frame_info *frame = get_current_frame ();
-
- gdb_assert (get_frame_type (frame) == DUMMY_FRAME);
- frame_pop (frame);
- /* frame_pop() calls reinit_frame_cache as the last thing it
- does which means there's currently no selected frame. We
- don't need to re-establish a selected frame if the dummy call
- returns normally, that will be done by
- restore_infcall_control_state. However, we do have to handle
- the case where the dummy call is returning after being
- stopped (e.g. the dummy call previously hit a breakpoint).
- We can't know which case we have so just always re-establish
- a selected frame here. */
select_frame (get_current_frame ());
- }
-done:
+ /* Set the current source location. */
+ set_current_sal_from_frame (get_current_frame ());
+ }
- /* Suppress the stop observer if we're in the middle of:
+ /* Look up the hook_stop and run it (CLI internally handles problem
+ of stop_command's pre-hook not existing). */
+ if (stop_command != NULL)
+ {
+ struct stop_context *saved_context = save_stop_context ();
+ struct cleanup *old_chain
+ = make_cleanup (release_stop_context_cleanup, saved_context);
- - calling an inferior function, as we pretend we inferior didn't
- run at all. The return value of the call is handled by the
- expression evaluator, through call_function_by_hand. */
+ TRY
+ {
+ execute_cmd_pre_hook (stop_command);
+ }
+ CATCH (ex, RETURN_MASK_ALL)
+ {
+ exception_fprintf (gdb_stderr, ex,
+ "Error while running hook_stop:\n");
+ }
+ END_CATCH
- if (!target_has_execution
- || last.kind == TARGET_WAITKIND_SIGNALLED
- || last.kind == TARGET_WAITKIND_EXITED
- || last.kind == TARGET_WAITKIND_NO_RESUMED
- || !inferior_thread ()->control.in_infcall)
- {
- if (!ptid_equal (inferior_ptid, null_ptid))
- observer_notify_normal_stop (inferior_thread ()->control.stop_bpstat,
- stop_print_frame);
- else
- observer_notify_normal_stop (NULL, stop_print_frame);
+ /* If the stop hook resumes the target, then there's no point in
+ trying to notify about the previous stop; its context is
+ gone. Likewise if the command switches thread or inferior --
+ the observers would print a stop for the wrong
+ thread/inferior. */
+ if (stop_context_changed (saved_context))
+ {
+ do_cleanups (old_chain);
+ return 1;
+ }
+ do_cleanups (old_chain);
}
+ /* Notify observers about the stop. This is where the interpreters
+ print the stop event. */
+ if (!ptid_equal (inferior_ptid, null_ptid))
+ gdb::observers::normal_stop.notify (inferior_thread ()->control.stop_bpstat,
+ stop_print_frame);
+ else
+ gdb::observers::normal_stop.notify (NULL, stop_print_frame);
+
annotate_stopped ();
if (target_has_execution)
longer needed. Keeping those around slows down things linearly.
Note that this never removes the current inferior. */
prune_inferiors ();
-}
-static int
-hook_stop_stub (void *cmd)
-{
- execute_cmd_pre_hook ((struct cmd_list_element *) cmd);
- return (0);
+ return 0;
}
\f
int
/* Specify how various signals in the inferior should be handled. */
static void
-handle_command (char *args, int from_tty)
+handle_command (const char *args, int from_tty)
{
- char **argv;
int digits, wordlen;
int sigfirst, signum, siglast;
enum gdb_signal oursig;
int allsigs;
int nsigs;
unsigned char *sigs;
- struct cleanup *old_chain;
if (args == NULL)
{
/* Break the command line up into args. */
- argv = gdb_buildargv (args);
- old_chain = make_cleanup_freeargv (argv);
+ gdb_argv built_argv (args);
/* Walk through the args, looking for signal oursigs, signal names, and
actions. Signal numbers and signal names may be interspersed with
actions, with the actions being performed for all signals cumulatively
specified. Signal ranges can be specified as <LOW>-<HIGH>. */
- while (*argv != NULL)
+ for (char *arg : built_argv)
{
- wordlen = strlen (*argv);
- for (digits = 0; isdigit ((*argv)[digits]); digits++)
+ wordlen = strlen (arg);
+ for (digits = 0; isdigit (arg[digits]); digits++)
{;
}
allsigs = 0;
sigfirst = siglast = -1;
- if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
+ if (wordlen >= 1 && !strncmp (arg, "all", wordlen))
{
/* Apply action to all signals except those used by the
debugger. Silently skip those. */
sigfirst = 0;
siglast = nsigs - 1;
}
- else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+ else if (wordlen >= 1 && !strncmp (arg, "stop", wordlen))
{
SET_SIGS (nsigs, sigs, signal_stop);
SET_SIGS (nsigs, sigs, signal_print);
}
- else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+ else if (wordlen >= 1 && !strncmp (arg, "ignore", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_program);
}
- else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+ else if (wordlen >= 2 && !strncmp (arg, "print", wordlen))
{
SET_SIGS (nsigs, sigs, signal_print);
}
- else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+ else if (wordlen >= 2 && !strncmp (arg, "pass", wordlen))
{
SET_SIGS (nsigs, sigs, signal_program);
}
- else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+ else if (wordlen >= 3 && !strncmp (arg, "nostop", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_stop);
}
- else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+ else if (wordlen >= 3 && !strncmp (arg, "noignore", wordlen))
{
SET_SIGS (nsigs, sigs, signal_program);
}
- else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+ else if (wordlen >= 4 && !strncmp (arg, "noprint", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_print);
UNSET_SIGS (nsigs, sigs, signal_stop);
}
- else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
+ else if (wordlen >= 4 && !strncmp (arg, "nopass", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_program);
}
SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */
sigfirst = siglast = (int)
- gdb_signal_from_command (atoi (*argv));
- if ((*argv)[digits] == '-')
+ gdb_signal_from_command (atoi (arg));
+ if (arg[digits] == '-')
{
siglast = (int)
- gdb_signal_from_command (atoi ((*argv) + digits + 1));
+ gdb_signal_from_command (atoi (arg + digits + 1));
}
if (sigfirst > siglast)
{
}
else
{
- oursig = gdb_signal_from_name (*argv);
+ oursig = gdb_signal_from_name (arg);
if (oursig != GDB_SIGNAL_UNKNOWN)
{
sigfirst = siglast = (int) oursig;
else
{
/* Not a number and not a recognized flag word => complain. */
- error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv);
+ error (_("Unrecognized or ambiguous flag word: \"%s\"."), arg);
}
}
break;
}
}
-
- argv++;
}
for (signum = 0; signum < nsigs; signum++)
break;
}
-
- do_cleanups (old_chain);
}
/* Complete the "handle" command. */
-static VEC (char_ptr) *
+static void
handle_completer (struct cmd_list_element *ignore,
+ completion_tracker &tracker,
const char *text, const char *word)
{
- VEC (char_ptr) *vec_signals, *vec_keywords, *return_val;
static const char * const keywords[] =
{
"all",
NULL,
};
- vec_signals = signal_completer (ignore, text, word);
- vec_keywords = complete_on_enum (keywords, word, word);
-
- return_val = VEC_merge (char_ptr, vec_signals, vec_keywords);
- VEC_free (char_ptr, vec_signals);
- VEC_free (char_ptr, vec_keywords);
- return return_val;
+ signal_completer (ignore, tracker, text, word);
+ complete_on_enum (tracker, keywords, word, word);
}
enum gdb_signal
targets, all signals should be in the signal tables). */
static void
-signals_info (char *signum_exp, int from_tty)
+info_signals_command (const char *signum_exp, int from_tty)
{
enum gdb_signal oursig;
"to change these tables.\n"));
}
-/* Check if it makes sense to read $_siginfo from the current thread
- at this point. If not, throw an error. */
-
-static void
-validate_siginfo_access (void)
-{
- /* No current inferior, no siginfo. */
- if (ptid_equal (inferior_ptid, null_ptid))
- error (_("No thread selected."));
-
- /* Don't try to read from a dead thread. */
- if (is_exited (inferior_ptid))
- error (_("The current thread has terminated"));
-
- /* ... or from a spinning thread. */
- if (is_running (inferior_ptid))
- error (_("Selected thread is running."));
-}
-
/* The $_siginfo convenience variable is a bit special. We don't know
for sure the type of the value until we actually have a chance to
fetch the data. The type can change depending on gdbarch, so it is
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred =
target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO,
{
LONGEST transferred;
- validate_siginfo_access ();
+ /* If we can access registers, so can we access $_siginfo. Likewise
+ vice versa. */
+ validate_registers_access ();
transferred = target_write (¤t_target,
TARGET_OBJECT_SIGNAL_INFO,
/* Other fields: */
CORE_ADDR stop_pc;
- struct regcache *registers;
+ readonly_detached_regcache *registers;
/* Format of SIGINFO_DATA or NULL if it is not present. */
struct gdbarch *siginfo_gdbarch;
struct infcall_suspend_state *inf_state;
struct thread_info *tp = inferior_thread ();
struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
gdb_byte *siginfo_data = NULL;
if (gdbarch_get_siginfo_type_p (gdbarch))
size_t len = TYPE_LENGTH (type);
struct cleanup *back_to;
- siginfo_data = xmalloc (len);
+ siginfo_data = (gdb_byte *) xmalloc (len);
back_to = make_cleanup (xfree, siginfo_data);
if (target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO, NULL,
inf_state->stop_pc = stop_pc;
- inf_state->registers = regcache_dup (regcache);
+ inf_state->registers = new readonly_detached_regcache (*regcache);
return inf_state;
}
{
struct thread_info *tp = inferior_thread ();
struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
tp->suspend = inf_state->thread_suspend;
(and perhaps other times). */
if (target_has_execution)
/* NB: The register write goes through to the target. */
- regcache_cpy (regcache, inf_state->registers);
+ regcache->restore (inf_state->registers);
discard_infcall_suspend_state (inf_state);
}
static void
do_restore_infcall_suspend_state_cleanup (void *state)
{
- restore_infcall_suspend_state (state);
+ restore_infcall_suspend_state ((struct infcall_suspend_state *) state);
}
struct cleanup *
void
discard_infcall_suspend_state (struct infcall_suspend_state *inf_state)
{
- regcache_xfree (inf_state->registers);
+ delete inf_state->registers;
xfree (inf_state->siginfo_data);
xfree (inf_state);
}
-struct regcache *
+readonly_detached_regcache *
get_infcall_suspend_state_regcache (struct infcall_suspend_state *inf_state)
{
return inf_state->registers;
/* Other fields: */
enum stop_stack_kind stop_stack_dummy;
int stopped_by_random_signal;
- int stop_after_trap;
/* ID if the selected frame when the inferior function call was made. */
struct frame_id selected_frame_id;
/* Other fields: */
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
- inf_status->stop_after_trap = stop_after_trap;
inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
return inf_status;
}
-static int
-restore_selected_frame (void *args)
+static void
+restore_selected_frame (const frame_id &fid)
{
- struct frame_id *fid = (struct frame_id *) args;
- struct frame_info *frame;
-
- frame = frame_find_by_id (*fid);
+ frame_info *frame = frame_find_by_id (fid);
/* If inf_status->selected_frame_id is NULL, there was no previously
selected frame. */
if (frame == NULL)
{
warning (_("Unable to restore previously selected frame."));
- return 0;
+ return;
}
select_frame (frame);
-
- return (1);
}
/* Restore inferior session state to INF_STATUS. */
/* Other fields: */
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
- stop_after_trap = inf_status->stop_after_trap;
if (target_has_stack)
{
- /* The point of catch_errors is that if the stack is clobbered,
+ /* The point of the try/catch is that if the stack is clobbered,
walking the stack might encounter a garbage pointer and
error() trying to dereference it. */
- if (catch_errors
- (restore_selected_frame, &inf_status->selected_frame_id,
- "Unable to restore previously selected frame:\n",
- RETURN_MASK_ERROR) == 0)
- /* Error in restoring the selected frame. Select the innermost
- frame. */
- select_frame (get_current_frame ());
+ TRY
+ {
+ restore_selected_frame (inf_status->selected_frame_id);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ exception_fprintf (gdb_stderr, ex,
+ "Unable to restore previously selected frame:\n");
+ /* Error in restoring the selected frame. Select the
+ innermost frame. */
+ select_frame (get_current_frame ());
+ }
+ END_CATCH
}
xfree (inf_status);
static void
do_restore_infcall_control_state_cleanup (void *sts)
{
- restore_infcall_control_state (sts);
+ restore_infcall_control_state ((struct infcall_control_state *) sts);
}
struct cleanup *
xfree (inf_status);
}
\f
-/* restore_inferior_ptid() will be used by the cleanup machinery
- to restore the inferior_ptid value saved in a call to
- save_inferior_ptid(). */
-
-static void
-restore_inferior_ptid (void *arg)
-{
- ptid_t *saved_ptid_ptr = arg;
-
- inferior_ptid = *saved_ptid_ptr;
- xfree (arg);
-}
-
-/* Save the value of inferior_ptid so that it may be restored by a
- later call to do_cleanups(). Returns the struct cleanup pointer
- needed for later doing the cleanup. */
-
-struct cleanup *
-save_inferior_ptid (void)
-{
- ptid_t *saved_ptid_ptr = XNEW (ptid_t);
-
- *saved_ptid_ptr = inferior_ptid;
- return make_cleanup (restore_inferior_ptid, saved_ptid_ptr);
-}
-
/* See infrun.h. */
void
Set exec-direction / show exec-direction commands
(returns error unless target implements to_set_exec_direction method). */
-int execution_direction = EXEC_FORWARD;
+enum exec_direction_kind execution_direction = EXEC_FORWARD;
static const char exec_forward[] = "forward";
static const char exec_reverse[] = "reverse";
static const char *exec_direction = exec_forward;
};
static void
-set_exec_direction_func (char *args, int from_tty,
+set_exec_direction_func (const char *args, int from_tty,
struct cmd_list_element *cmd)
{
if (target_can_execute_reverse)
infrun_async_inferior_event_token
= create_async_event_handler (infrun_async_inferior_event_handler, NULL);
- add_info ("signals", signals_info, _("\
+ add_info ("signals", info_signals_command, _("\
What debugger does when program gets various signals.\n\
Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
signal_print[GDB_SIGNAL_WAITING] = 0;
signal_stop[GDB_SIGNAL_CANCEL] = 0;
signal_print[GDB_SIGNAL_CANCEL] = 0;
+ signal_stop[GDB_SIGNAL_LIBRT] = 0;
+ signal_print[GDB_SIGNAL_LIBRT] = 0;
/* Update cached state. */
signal_cache_update (-1);
scheduler_enums, &scheduler_mode, _("\
Set mode for locking scheduler during execution."), _("\
Show mode for locking scheduler during execution."), _("\
-off == no locking (threads may preempt at any time)\n\
-on == full locking (no thread except the current thread may run)\n\
-step == scheduler locked during stepping commands (step, next, stepi, nexti).\n\
- In this mode, other threads may run during other commands."),
+off == no locking (threads may preempt at any time)\n\
+on == full locking (no thread except the current thread may run)\n\
+ This applies to both normal execution and replay mode.\n\
+step == scheduler locked during stepping commands (step, next, stepi, nexti).\n\
+ In this mode, other threads may run during other commands.\n\
+ This applies to both normal execution and replay mode.\n\
+replay == scheduler locked in replay mode and unlocked during normal execution."),
set_schedlock_func, /* traps on target vector */
show_scheduler_mode,
&setlist, &showlist);
inferior_ptid = null_ptid;
target_last_wait_ptid = minus_one_ptid;
- observer_attach_thread_ptid_changed (infrun_thread_ptid_changed);
- observer_attach_thread_stop_requested (infrun_thread_stop_requested);
- observer_attach_thread_exit (infrun_thread_thread_exit);
- observer_attach_inferior_exit (infrun_inferior_exit);
+ gdb::observers::thread_ptid_changed.attach (infrun_thread_ptid_changed);
+ gdb::observers::thread_stop_requested.attach (infrun_thread_stop_requested);
+ gdb::observers::thread_exit.attach (infrun_thread_thread_exit);
+ gdb::observers::inferior_exit.attach (infrun_inferior_exit);
/* Explicitly create without lookup, since that tries to create a
value with a void typed value, and when we get here, gdbarch