/* Target-struct-independent code to start (run) and stop an inferior process.
- Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993
+ Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994
Free Software Foundation, Inc.
This file is part of GDB.
static void
handle_command PARAMS ((char *, int));
-static void
-sig_print_info PARAMS ((int));
+static void sig_print_info PARAMS ((enum target_signal));
static void
sig_print_header PARAMS ((void));
#define SKIP_TRAMPOLINE_CODE(pc) 0
#endif
-/* On Irix 5, some function calls automatically skip the first few
- instructions, so we need a more complicated test to see if we are
- the start of a function. */
-#ifndef AT_FUNCTION_START
-#define AT_FUNCTION_START(pc,func_name,func_addr) 0
-#endif
-
/* For SVR4 shared libraries, each call goes through a small piece of
trampoline code in the ".init" section. IN_SOLIB_TRAMPOLINE evaluates
to nonzero if we are current stopped in one of these. */
void
resume (step, sig)
int step;
- int sig;
+ enum target_signal sig;
{
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
void
proceed (addr, siggnal, step)
CORE_ADDR addr;
- int siggnal;
+ enum target_signal siggnal;
int step;
{
int oneproc = 0;
breakpoints_inserted = 1;
}
- if (siggnal >= 0)
+ if (siggnal != TARGET_SIGNAL_DEFAULT)
stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (stop_signal < NSIG && !signal_program[stop_signal])
- stop_signal= 0;
+ else if (!signal_program[stop_signal])
+ stop_signal = TARGET_SIGNAL_0;
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), stop_signal);
trap_expected_after_continue = 0;
breakpoints_inserted = 0;
breakpoint_init_inferior ();
- stop_signal = 0; /* Don't confuse first call to proceed(). */
+
+ /* Don't confuse first call to proceed(). */
+ stop_signal = TARGET_SIGNAL_0;
}
static void
wait_for_inferior ()
{
struct cleanup *old_cleanups;
- WAITTYPE w;
+ struct target_waitstatus w;
int another_trap;
int random_signal;
CORE_ADDR stop_sp = 0;
CORE_ADDR stop_func_start;
+ CORE_ADDR stop_func_end;
char *stop_func_name;
CORE_ADDR prologue_pc = 0, tmp;
struct symtab_and_line sal;
pid = target_wait (-1, &w);
-#ifdef SIGTRAP_STOP_AFTER_LOAD
-
- /* Somebody called load(2), and it gave us a "trap signal after load".
- Ignore it gracefully. */
+ switch (w.kind)
+ {
+ case TARGET_WAITKIND_LOADED:
+ /* Ignore it gracefully. */
+ if (breakpoints_inserted)
+ {
+ mark_breakpoints_out ();
+ insert_breakpoints ();
+ }
+ resume (0, TARGET_SIGNAL_0);
+ continue;
- SIGTRAP_STOP_AFTER_LOAD (w);
-#endif
+ case TARGET_WAITKIND_SPURIOUS:
+ resume (0, TARGET_SIGNAL_0);
+ continue;
- /* See if the process still exists; clean up if it doesn't. */
- if (WIFEXITED (w))
- {
+ case TARGET_WAITKIND_EXITED:
target_terminal_ours (); /* Must do this before mourn anyway */
- if (WEXITSTATUS (w))
+ if (w.value.integer)
printf_filtered ("\nProgram exited with code 0%o.\n",
- (unsigned int)WEXITSTATUS (w));
+ (unsigned int)w.value.integer);
else
if (!batch_mode())
printf_filtered ("\nProgram exited normally.\n");
one_stepped = 0;
#endif
stop_print_frame = 0;
- break;
- }
- else if (!WIFSTOPPED (w))
- {
- char *signame;
-
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_SIGNALLED:
stop_print_frame = 0;
- stop_signal = WTERMSIG (w);
+ stop_signal = w.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
target_kill (); /* kill mourns as well */
-#ifdef PRINT_RANDOM_SIGNAL
- printf_filtered ("\nProgram terminated: ");
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
- printf_filtered ("\nProgram terminated with signal ");
- signame = strsigno (stop_signal);
- if (signame == NULL)
- printf_filtered ("%d", stop_signal);
- else
- /* Do we need to print the number in addition to the name? */
- printf_filtered ("%s (%d)", signame, stop_signal);
- printf_filtered (", %s\n", safe_strsignal (stop_signal));
-#endif
+ printf_filtered ("\nProgram terminated with signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
+
printf_filtered ("The program no longer exists.\n");
gdb_flush (gdb_stdout);
#ifdef NO_SINGLE_STEP
one_stepped = 0;
#endif
+ goto stop_stepping;
+
+ case TARGET_WAITKIND_STOPPED:
+ /* This is the only case in which we keep going; the above cases
+ end in a continue or goto. */
break;
}
- stop_signal = WSTOPSIG (w);
+ stop_signal = w.value.sig;
if (pid != inferior_pid)
{
else
stop_pc = read_pc ();
- if (stop_signal == SIGTRAP
+ if (stop_signal == TARGET_SIGNAL_TRAP
&& breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
{
if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK, pid))
write_pc (stop_pc - DECR_PC_AFTER_BREAK);
remove_breakpoints ();
- target_resume (pid, 1, 0); /* Single step */
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
/* FIXME: What if a signal arrives instead of the single-step
happening? */
target_wait (pid, &w);
insert_breakpoints ();
}
- target_resume (-1, 0, 0);
+ target_resume (-1, 0, TARGET_SIGNAL_0);
continue;
}
else
fprintf_unfiltered (gdb_stderr, "[New %s]\n", target_pid_to_str (pid));
add_thread (pid);
- target_resume (-1, 0, 0);
+ target_resume (-1, 0, TARGET_SIGNAL_0);
continue;
}
else
{
- if (stop_signal >= NSIG || signal_print[stop_signal])
+ if (signal_print[stop_signal])
{
char *signame;
printed = 1;
target_terminal_ours_for_output ();
- printf_filtered ("\nProgram received signal ");
- signame = strsigno (stop_signal);
- if (signame == NULL)
- printf_filtered ("%d", stop_signal);
- else
- printf_filtered ("%s (%d)", signame, stop_signal);
- printf_filtered (", %s\n", safe_strsignal (stop_signal));
-
+ printf_filtered ("\nProgram received signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
gdb_flush (gdb_stdout);
}
- if (stop_signal == SIGTRAP
- || stop_signal >= NSIG
+ if (stop_signal == TARGET_SIGNAL_TRAP
|| signal_stop[stop_signal])
{
switch_thread:
/* Clear the signal if it should not be passed. */
if (signal_program[stop_signal] == 0)
- stop_signal = 0;
+ stop_signal = TARGET_SIGNAL_0;
target_resume (pid, 0, stop_signal);
continue;
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
- NULL);
+ &stop_func_end);
stop_func_start += FUNCTION_START_OFFSET;
another_trap = 0;
bpstat_clear (&stop_bpstat);
Here we detect when a SIGILL or SIGEMT is really a breakpoint
and change it to SIGTRAP. */
- if (stop_signal == SIGTRAP
+ if (stop_signal == TARGET_SIGNAL_TRAP
|| (breakpoints_inserted &&
- (stop_signal == SIGILL
-#ifdef SIGEMT
- || stop_signal == SIGEMT
-#endif
+ (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_EMT
))
|| stop_soon_quietly)
{
- if (stop_signal == SIGTRAP && stop_after_trap)
+ if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
stop_print_frame = 0;
break;
and end up in sigtramp, then step_resume_breakpoint
will be set and we should check whether we've hit the
step breakpoint. */
- if (stop_signal == SIGTRAP && trap_expected
+ if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
&& step_resume_breakpoint == NULL)
bpstat_clear (&stop_bpstat);
else
stop_print_frame = 1;
}
- if (stop_signal == SIGTRAP)
+ if (stop_signal == TARGET_SIGNAL_TRAP)
random_signal
= !(bpstat_explains_signal (stop_bpstat)
|| trap_expected
#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET. */
);
if (!random_signal)
- stop_signal = SIGTRAP;
+ stop_signal = TARGET_SIGNAL_TRAP;
}
}
else
stopped_by_random_signal = 1;
- if (stop_signal >= NSIG
- || signal_print[stop_signal])
+ if (signal_print[stop_signal])
{
char *signame;
printed = 1;
target_terminal_ours_for_output ();
-#ifdef PRINT_RANDOM_SIGNAL
- PRINT_RANDOM_SIGNAL (stop_signal);
-#else
- printf_filtered ("\nProgram received signal ");
- signame = strsigno (stop_signal);
- if (signame == NULL)
- printf_filtered ("%d", stop_signal);
- else
- /* Do we need to print the number as well as the name? */
- printf_filtered ("%s (%d)", signame, stop_signal);
- printf_filtered (", %s\n", safe_strsignal (stop_signal));
-#endif /* PRINT_RANDOM_SIGNAL */
+ printf_filtered ("\nProgram received signal %s, %s.\n",
+ target_signal_to_name (stop_signal),
+ target_signal_to_string (stop_signal));
gdb_flush (gdb_stdout);
}
- if (stop_signal >= NSIG
- || signal_stop[stop_signal])
+ if (signal_stop[stop_signal])
break;
/* If not going to stop, give terminal back
if we took it away. */
/* Clear the signal if it should not be passed. */
if (signal_program[stop_signal] == 0)
- stop_signal = 0;
+ stop_signal = TARGET_SIGNAL_0;
/* I'm not sure whether this needs to be check_sigtramp2 or
whether it could/should be keep_going. */
like a subroutine call. */
! stop_func_start
- /* If we do a call, we will be at the start of a function. */
+ /* If we do a call, we will be at the start of a function... */
|| stop_pc == stop_func_start
- || AT_FUNCTION_START (stop_pc, stop_func_name, stop_func_start)
-#if 0
- /* Not conservative enough for 4.11. FIXME: enable this
- after 4.11. */
- /* Except on the Alpha with -O (and perhaps other machines
- with similar calling conventions), in which we might
- call the address after the load of gp. Since prologues
- don't contain calls, we can't return to within one, and
- we don't jump back into them, so this check is OK. */
+ /* ...except on the Alpha with -O (and also Irix 5 and
+ perhaps others), in which we might call the address
+ after the load of gp. Since prologues don't contain
+ calls, we can't return to within one, and we don't
+ jump back into them, so this check is OK. */
+
|| stop_pc < prologue_pc
-#endif
/* If we end up in certain places, it means we did a subroutine
call. I'm not completely sure this is necessary now that we
the end of the prologue, even if that involves jumps
(as it seems to on the vax under 4.2). */
/* If the prologue ends in the middle of a source line,
- continue to the end of that source line.
- Otherwise, just go to end of prologue. */
+ continue to the end of that source line (if it is still
+ within the function). Otherwise, just go to end of prologue. */
#ifdef PROLOGUE_FIRSTLINE_OVERLAP
/* no, don't either. It skips any code that's
legitimately on the first line. */
#else
- if (sal.end && sal.pc != stop_func_start)
+ if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end)
stop_func_start = sal.end;
#endif
(We might not be in the original line, but if we entered a
new line in mid-statement, we continue stepping. This makes
things like for(;;) statements work better.) */
+
+ if (stop_func_end && sal.end >= stop_func_end)
+ {
+ /* If this is the last line of the function, don't keep stepping
+ (it would probably step us out of the function).
+ This is particularly necessary for a one-line function,
+ in which after skipping the prologue we better stop even though
+ we will be in mid-line. */
+ stop_step = 1;
+ break;
+ }
step_range_start = sal.pc;
step_range_end = sal.end;
goto keep_going;
/* If we did not do break;, it means we should keep
running the inferior and not return to debugger. */
- if (trap_expected && stop_signal != SIGTRAP)
+ if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd have done a break above) and we
trap_expected = another_trap;
- if (stop_signal == SIGTRAP)
- stop_signal = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP)
+ stop_signal = TARGET_SIGNAL_0;
#ifdef SHIFT_INST_REGS
/* I'm not sure when this following segment applies. I do know, now,
(this is only used on the 88k). */
if (!bpstat_explains_signal (stop_bpstat)
- && (stop_signal != SIGCLD)
+ && (stop_signal != TARGET_SIGNAL_CHLD)
&& !stopped_by_random_signal)
SHIFT_INST_REGS();
#endif /* SHIFT_INST_REGS */
POP_FRAME ends with a setting of the current frame, so we
can use that next. */
POP_FRAME;
+ /* Set stop_pc to what it was before we called the function. Can't rely
+ on restore_inferior_status because that only gets called if we don't
+ stop in the called function. */
+ stop_pc = read_pc();
select_frame (get_current_frame (), 0);
}
}
int signal_stop_state (signo)
int signo;
{
- return ((signo >= 0 && signo < NSIG) ? signal_stop[signo] : 0);
+ return signal_stop[signo];
}
int signal_print_state (signo)
int signo;
{
- return ((signo >= 0 && signo < NSIG) ? signal_print[signo] : 0);
+ return signal_print[signo];
}
int signal_pass_state (signo)
int signo;
{
- return ((signo >= 0 && signo < NSIG) ? signal_program[signo] : 0);
+ return signal_program[signo];
}
static void
sig_print_header ()
{
- printf_filtered ("Signal\t\tStop\tPrint\tPass to program\tDescription\n");
+ printf_filtered ("\
+Signal Stop\tPrint\tPass to program\tDescription\n");
}
static void
-sig_print_info (number)
- int number;
+sig_print_info (oursig)
+ enum target_signal oursig;
{
- char *name;
-
- if ((name = strsigno (number)) == NULL)
- printf_filtered ("%d\t\t", number);
- else
- printf_filtered ("%s (%d)\t", name, number);
- printf_filtered ("%s\t", signal_stop[number] ? "Yes" : "No");
- printf_filtered ("%s\t", signal_print[number] ? "Yes" : "No");
- printf_filtered ("%s\t\t", signal_program[number] ? "Yes" : "No");
- printf_filtered ("%s\n", safe_strsignal (number));
+ char *name = target_signal_to_name (oursig);
+ printf_filtered ("%s", name);
+ printf_filtered ("%*.*s ", 13 - strlen (name), 13 - strlen (name),
+ " ");
+ printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
+ printf_filtered ("%s\n", target_signal_to_string (oursig));
}
/* Specify how various signals in the inferior should be handled. */
char **argv;
int digits, wordlen;
int sigfirst, signum, siglast;
+ enum target_signal oursig;
int allsigs;
int nsigs;
unsigned char *sigs;
/* Allocate and zero an array of flags for which signals to handle. */
- nsigs = signo_max () + 1;
+ nsigs = (int)TARGET_SIGNAL_LAST;
sigs = (unsigned char *) alloca (nsigs);
memset (sigs, 0, nsigs);
}
old_chain = make_cleanup (freeargv, (char *) argv);
- /* Walk through the args, looking for signal numbers, signal names, and
+ /* Walk through the args, looking for signal oursigs, signal names, and
actions. Signal numbers and signal names may be interspersed with
actions, with the actions being performed for all signals cumulatively
specified. Signal ranges can be specified as <LOW>-<HIGH>. */
}
else if (digits > 0)
{
+ /* It is numeric. The numeric signal refers to our own internal
+ signal numbering from target.h, not to host/target signal number.
+ This is a feature; users really should be using symbolic names
+ anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
+ will work right anyway. */
+
sigfirst = siglast = atoi (*argv);
if ((*argv)[digits] == '-')
{
error ("Signal %d not in range 0-%d", siglast, nsigs - 1);
}
}
- else if ((signum = strtosigno (*argv)) != 0)
- {
- sigfirst = siglast = signum;
- }
else
{
- /* Not a number and not a recognized flag word => complain. */
- error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ oursig = target_signal_from_name (*argv);
+ if (oursig != TARGET_SIGNAL_UNKNOWN)
+ {
+ sigfirst = siglast = (int)oursig;
+ }
+ else
+ {
+ /* Not a number and not a recognized flag word => complain. */
+ error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ }
}
/* If any signal numbers or symbol names were found, set flags for
for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
- switch (signum)
+ switch ((enum target_signal)signum)
{
- case SIGTRAP:
- case SIGINT:
+ case TARGET_SIGNAL_TRAP:
+ case TARGET_SIGNAL_INT:
if (!allsigs && !sigs[signum])
{
- if (query ("%s is used by the debugger.\nAre you sure you want to change it? ", strsigno (signum)))
+ if (query ("%s is used by the debugger.\n\
+Are you sure you want to change it? ",
+ target_signal_to_name
+ ((enum target_signal)signum)))
{
sigs[signum] = 1;
}
do_cleanups (old_chain);
}
-/* Print current contents of the tables set by the handle command. */
+/* Print current contents of the tables set by the handle command.
+ It is possible we should just be printing signals actually used
+ by the current target (but for things to work right when switching
+ targets, all signals should be in the signal tables). */
static void
signals_info (signum_exp, from_tty)
char *signum_exp;
int from_tty;
{
- register int i;
+ enum target_signal oursig;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
- i = strtosigno (signum_exp);
- if (i == 0)
+ oursig = target_signal_from_name (signum_exp);
+ if (oursig == TARGET_SIGNAL_UNKNOWN)
{
/* Nope, maybe it's an address which evaluates to a signal
number. */
- i = parse_and_eval_address (signum_exp);
- if (i >= NSIG || i < 0)
+ /* The numeric signal refers to our own internal
+ signal numbering from target.h, not to host/target signal number.
+ This is a feature; users really should be using symbolic names
+ anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
+ will work right anyway. */
+ int i = parse_and_eval_address (signum_exp);
+ if (i >= (int)TARGET_SIGNAL_LAST
+ || i < 0
+ || i == (int)TARGET_SIGNAL_UNKNOWN
+ || i == (int)TARGET_SIGNAL_DEFAULT)
error ("Signal number out of bounds.");
+ oursig = (enum target_signal)i;
}
- sig_print_info (i);
+ sig_print_info (oursig);
return;
}
printf_filtered ("\n");
- for (i = 0; i < NSIG; i++)
+ /* These ugly casts brought to you by the native VAX compiler. */
+ for (oursig = 0;
+ (int)oursig < (int)TARGET_SIGNAL_LAST;
+ oursig = (enum target_signal)((int)oursig + 1))
{
QUIT;
- sig_print_info (i);
+ if (oursig != TARGET_SIGNAL_UNKNOWN
+ && oursig != TARGET_SIGNAL_DEFAULT
+ && oursig != TARGET_SIGNAL_0)
+ sig_print_info (oursig);
}
printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
This allows you to set a list of commands to be run each time execution\n\
of the program stops.", &cmdlist);
- numsigs = signo_max () + 1;
- signal_stop = (unsigned char *)
- xmalloc (sizeof (signal_stop[0]) * numsigs);
- signal_print = (unsigned char *)
- xmalloc (sizeof (signal_print[0]) * numsigs);
+ numsigs = (int)TARGET_SIGNAL_LAST;
+ signal_stop = (unsigned char *)
+ xmalloc (sizeof (signal_stop[0]) * numsigs);
+ signal_print = (unsigned char *)
+ xmalloc (sizeof (signal_print[0]) * numsigs);
signal_program = (unsigned char *)
- xmalloc (sizeof (signal_program[0]) * numsigs);
+ xmalloc (sizeof (signal_program[0]) * numsigs);
for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
- signal_program[SIGTRAP] = 0;
- signal_program[SIGINT] = 0;
+ signal_program[TARGET_SIGNAL_TRAP] = 0;
+ signal_program[TARGET_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
-#ifdef SIGALRM
- signal_stop[SIGALRM] = 0;
- signal_print[SIGALRM] = 0;
-#endif /* SIGALRM */
-#ifdef SIGVTALRM
- signal_stop[SIGVTALRM] = 0;
- signal_print[SIGVTALRM] = 0;
-#endif /* SIGVTALRM */
-#ifdef SIGPROF
- signal_stop[SIGPROF] = 0;
- signal_print[SIGPROF] = 0;
-#endif /* SIGPROF */
-#ifdef SIGCHLD
- signal_stop[SIGCHLD] = 0;
- signal_print[SIGCHLD] = 0;
-#endif /* SIGCHLD */
-#ifdef SIGCLD
- signal_stop[SIGCLD] = 0;
- signal_print[SIGCLD] = 0;
-#endif /* SIGCLD */
-#ifdef SIGIO
- signal_stop[SIGIO] = 0;
- signal_print[SIGIO] = 0;
-#endif /* SIGIO */
-#ifdef SIGURG
- signal_stop[SIGURG] = 0;
- signal_print[SIGURG] = 0;
-#endif /* SIGURG */
+ signal_stop[TARGET_SIGNAL_ALRM] = 0;
+ signal_print[TARGET_SIGNAL_ALRM] = 0;
+ signal_stop[TARGET_SIGNAL_VTALRM] = 0;
+ signal_print[TARGET_SIGNAL_VTALRM] = 0;
+ signal_stop[TARGET_SIGNAL_PROF] = 0;
+ signal_print[TARGET_SIGNAL_PROF] = 0;
+ signal_stop[TARGET_SIGNAL_CHLD] = 0;
+ signal_print[TARGET_SIGNAL_CHLD] = 0;
+ signal_stop[TARGET_SIGNAL_IO] = 0;
+ signal_print[TARGET_SIGNAL_IO] = 0;
+ signal_stop[TARGET_SIGNAL_POLL] = 0;
+ signal_print[TARGET_SIGNAL_POLL] = 0;
+ signal_stop[TARGET_SIGNAL_URG] = 0;
+ signal_print[TARGET_SIGNAL_URG] = 0;
}