use _filtered routines for printing so symbolic addresses show up in the right place
[deliverable/binutils-gdb.git] / gdb / infrun.c
index 5dcf5647c0b25aeaae869a9fc1e908106670705b..b8464443ce907b0054aa2a01953ac90e67c3ab39 100644 (file)
@@ -1,21 +1,21 @@
-/* Start and stop the inferior process, for GDB.
-   Copyright (C) 1986, 1987, 1988, 1989 Free Software Foundation, Inc.
+/* Start (run) and stop the inferior process, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
 
 This file is part of GDB.
 
-GDB is free software; you can redistribute it and/or modify
+This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
 
-GDB is distributed in the hope that it will be useful,
+This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
 
 /* Notes on the algorithm used in wait_for_inferior to determine if we
    just did a subroutine call when stepping.  We have the following
@@ -25,7 +25,7 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
                  Current and previous sp.
                  Current and previous start of current function.
 
-   If the start's of the functions don't match, then
+   If the starts of the functions don't match, then
 
        a) We did a subroutine call.
 
@@ -74,7 +74,7 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
           itself.  Hmmm.  One would hope that the stack pointer would
           also change.  If it doesn't, somebody send me a note, and
           I'll work out a more general theory.
-          randy@wheaties.ai.mit.edu).  This is true (albeit slipperly
+          bug-gdb@prep.ai.mit.edu).  This is true (albeit slipperly
           so) on all machines I'm aware of:
 
              m68k:     Call changes stack pointer.  Regular jumps don't.
@@ -99,31 +99,20 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
           don't worry about this; it will make calls look like simple
           jumps (and the stack frames will be printed when the frame
           pointer moves), which is a reasonably non-violent response.
-
-#if 0
-    We skip this; it causes more problems than it's worth.
-#ifdef SUN4_COMPILER_FEATURE
-    We do a special ifdef for the sun 4, forcing it to single step
-  into calls which don't have prologues.  This means that we can't
-  nexti over leaf nodes, we can probably next over them (since they
-  won't have debugging symbols, usually), and we can next out of
-  functions returning structures (with a "call .stret4" at the end).
-#endif
-#endif
 */
-   
-
-   
-   
 
 #include "defs.h"
-#include "param.h"
+#include <string.h>
 #include "symtab.h"
 #include "frame.h"
 #include "inferior.h"
+#include "breakpoint.h"
 #include "wait.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "terminal.h"          /* For #ifdef TIOCGPGRP and new_tty */
+#include "target.h"
 
-#include <stdio.h>
 #include <signal.h>
 
 /* unistd.h is needed to #define X_OK */
@@ -133,23 +122,42 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 #include <sys/file.h>
 #endif
 
-#ifdef UMAX_PTRACE
-#include <aouthdr.h>
-#include <sys/param.h>
-#include <sys/ptrace.h>
-#endif /* UMAX_PTRACE */
+#ifdef SET_STACK_LIMIT_HUGE
+#include <sys/time.h>
+#include <sys/resource.h>
+
+extern int original_stack_limit;
+#endif /* SET_STACK_LIMIT_HUGE */
+
+/* Prototypes for local functions */
+
+static void
+signals_info PARAMS ((char *, int));
+
+static void
+handle_command PARAMS ((char *, int));
+
+static void
+sig_print_info PARAMS ((int));
+
+static void
+sig_print_header PARAMS ((void));
+
+static void
+remove_step_breakpoint PARAMS ((void));
+
+static void
+insert_step_breakpoint PARAMS ((void));
+
+static void
+resume PARAMS ((int, int));
+
+static void
+resume_cleanups PARAMS ((int));
 
-/* Required by <sys/user.h>.  */
-#include <sys/types.h>
-/* Required by <sys/user.h>, at least on system V.  */
-#include <sys/dir.h>
-/* Needed by IN_SIGTRAMP on some machines (e.g. vax).  */
-#include <sys/param.h>
-/* Needed by IN_SIGTRAMP on some machines (e.g. vax).  */
-#include <sys/user.h>
+extern char **environ;
 
-extern char *sys_siglist[];
-extern int errno;
+extern struct target_ops child_ops;    /* In inftarg.c */
 
 /* Sigtramp is a routine that the kernel calls (which then calls the
    signal handler).  On most machines it is a library routine that
@@ -164,44 +172,88 @@ extern int errno;
    no name, assume we are not in sigtramp).  */
 #if !defined (IN_SIGTRAMP)
 #define IN_SIGTRAMP(pc, name) \
-  name && !strcmp ("_sigtramp", name)
+  (name && !strcmp ("_sigtramp", name))
+#endif
+
+/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
+   program.  It needs to examine the jmp_buf argument and extract the PC
+   from it.  The return value is non-zero on success, zero otherwise. */
+#ifndef GET_LONGJMP_TARGET
+#define GET_LONGJMP_TARGET(PC_ADDR) 0
+#endif
+
+
+/* Some machines have trampoline code that sits between function callers
+   and the actual functions themselves.  If this machine doesn't have
+   such things, disable their processing.  */
+#ifndef SKIP_TRAMPOLINE_CODE
+#define        SKIP_TRAMPOLINE_CODE(pc)        0
+#endif
+
+/* For SVR4 shared libraries, each call goes through a small piece of
+   trampoline code in the ".init" section.  IN_SOLIB_TRAMPOLINE evaluates
+   to nonzero if we are current stopped in one of these. */
+#ifndef IN_SOLIB_TRAMPOLINE
+#define IN_SOLIB_TRAMPOLINE(pc,name)   0
+#endif
+
+/* Notify other parts of gdb that might care that signal handling may
+   have changed for one or more signals. */
+#ifndef NOTICE_SIGNAL_HANDLING_CHANGE
+#define NOTICE_SIGNAL_HANDLING_CHANGE  /* No actions */
+#endif
+
+#ifdef TDESC
+#include "tdesc.h"
+int safe_to_init_tdesc_context = 0;
+extern dc_dcontext_t current_context;
 #endif
 
 /* Tables of how to react to signals; the user sets them.  */
 
-static char signal_stop[NSIG];
-static char signal_print[NSIG];
-static char signal_program[NSIG];
+static unsigned char *signal_stop;
+static unsigned char *signal_print;
+static unsigned char *signal_program;
+
+#define SET_SIGS(nsigs,sigs,flags) \
+  do { \
+    int signum = (nsigs); \
+    while (signum-- > 0) \
+      if ((sigs)[signum]) \
+       (flags)[signum] = 1; \
+  } while (0)
+
+#define UNSET_SIGS(nsigs,sigs,flags) \
+  do { \
+    int signum = (nsigs); \
+    while (signum-- > 0) \
+      if ((sigs)[signum]) \
+       (flags)[signum] = 0; \
+  } while (0)
 
 /* Nonzero if breakpoints are now inserted in the inferior.  */
+/* Nonstatic for initialization during xxx_create_inferior. FIXME. */
 
-static int breakpoints_inserted;
+/*static*/ int breakpoints_inserted;
 
 /* Function inferior was in as of last step command.  */
 
 static struct symbol *step_start_function;
 
-/* This is the sequence of bytes we insert for a breakpoint.  */
-
-static char break_insn[] = BREAKPOINT;
-
 /* Nonzero => address for special breakpoint for resuming stepping.  */
 
 static CORE_ADDR step_resume_break_address;
 
-/* Original contents of the byte where the special breakpoint is.  */
+/* Pointer to orig contents of the byte where the special breakpoint is.  */
 
-static char step_resume_break_shadow[sizeof break_insn];
+static char step_resume_break_shadow[BREAKPOINT_MAX];
 
 /* Nonzero means the special breakpoint is a duplicate
    so it has not itself been inserted.  */
 
 static int step_resume_break_duplicate;
 
-/* Nonzero if we are expecting a trace trap and should proceed from it.
-   2 means expecting 2 trace traps and should continue both times.
-   That occurs when we tell sh to exec the program: we will get
-   a trap after the exec of sh and a second when the program is exec'd.  */
+/* Nonzero if we are expecting a trace trap and should proceed from it.  */
 
 static int trap_expected;
 
@@ -216,20 +268,27 @@ static int trap_expected_after_continue;
 
 int stop_after_trap;
 
-/* Nonzero means expecting a trace trap due to attaching to a process.  */
+/* Nonzero means expecting a trap and caller will handle it themselves.
+   It is used after attach, due to attaching to a process;
+   when running in the shell before the child program has been exec'd;
+   and when running some kinds of remote stuff (FIXME?).  */
 
-int stop_after_attach;
+int stop_soon_quietly;
 
 /* Nonzero if pc has been changed by the debugger
    since the inferior stopped.  */
 
 int pc_changed;
 
-/* Nonzero if debugging a remote machine via a serial link or ethernet.  */
+/* Nonzero if proceed is being used for a "finish" command or a similar
+   situation when stop_registers should be saved.  */
 
-int remote_debugging;
+int proceed_to_finish;
 
-/* Save register contents here when about to pop a stack dummy frame.  */
+/* Save register contents here when about to pop a stack dummy frame,
+   if-and-only-if proceed_to_finish is set.
+   Thus this contains the return value from the called function (assuming
+   values are returned in a register).  */
 
 char stop_registers[REGISTER_BYTES];
 
@@ -237,10 +296,6 @@ char stop_registers[REGISTER_BYTES];
 
 static int breakpoints_failed;
 
-/* Nonzero if inferior is in sh before our program got exec'd.  */
-
-static int running_in_shell;
-
 /* Nonzero after stop if current stack frame should be printed.  */
 
 static int stop_print_frame;
@@ -250,10 +305,47 @@ extern int one_stepped;           /* From machine dependent code */
 extern void single_step ();    /* Same. */
 #endif /* NO_SINGLE_STEP */
 
-static void insert_step_breakpoint ();
-static void remove_step_breakpoint ();
-static void wait_for_inferior ();
-static void normal_stop ();
+\f
+/* Things to clean up if we QUIT out of resume ().  */
+/* ARGSUSED */
+static void
+resume_cleanups (arg)
+     int arg;
+{
+  normal_stop ();
+}
+
+/* Resume the inferior, but allow a QUIT.  This is useful if the user
+   wants to interrupt some lengthy single-stepping operation
+   (for child processes, the SIGINT goes to the inferior, and so
+   we get a SIGINT random_signal, but for remote debugging and perhaps
+   other targets, that's not true).
+
+   STEP nonzero if we should step (zero to continue instead).
+   SIG is the signal to give the inferior (zero for none).  */
+static void
+resume (step, sig)
+     int step;
+     int sig;
+{
+  struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
+  QUIT;
+
+#ifdef NO_SINGLE_STEP
+  if (step) {
+    single_step(sig);  /* Do it the hard way, w/temp breakpoints */
+    step = 0;          /* ...and don't ask hardware to do it.  */
+  }
+#endif
+
+  /* Handle any optimized stores to the inferior NOW...  */
+#ifdef DO_DEFERRED_STORES
+  DO_DEFERRED_STORES;
+#endif
+
+  target_resume (step, sig);
+  discard_cleanups (old_cleanups);
+}
 
 \f
 /* Clear out all variables saying what to do when inferior is continued.
@@ -269,16 +361,18 @@ clear_proceed_status ()
   step_over_calls = -1;
   step_resume_break_address = 0;
   stop_after_trap = 0;
-  stop_after_attach = 0;
+  stop_soon_quietly = 0;
+  proceed_to_finish = 0;
+  breakpoint_proceeded = 1;    /* We're about to proceed... */
 
-  /* Discard any remaining commands left by breakpoint we had stopped at.  */
-  clear_breakpoint_commands ();
+  /* Discard any remaining commands or status from previous stop.  */
+  bpstat_clear (&stop_bpstat);
 }
 
 /* Basic routine for continuing the program in various fashions.
 
    ADDR is the address to resume at, or -1 for resume where stopped.
-   SIGNAL is the signal to give it, or 0 for none,
+   SIGGNAL is the signal to give it, or 0 for none,
      or -1 for act according to how it stopped.
    STEP is nonzero if should trap after one instruction.
      -1 means return after that and print nothing.
@@ -288,9 +382,9 @@ clear_proceed_status ()
    You should call clear_proceed_status before calling proceed.  */
 
 void
-proceed (addr, signal, step)
+proceed (addr, siggnal, step)
      CORE_ADDR addr;
-     int signal;
+     int siggnal;
      int step;
 {
   int oneproc = 0;
@@ -300,7 +394,7 @@ proceed (addr, signal, step)
   if (step < 0)
     stop_after_trap = 1;
 
-  if (addr == -1)
+  if (addr == (CORE_ADDR)-1)
     {
       /* If there is a breakpoint at the address we will resume at,
         step one instruction before inserting breakpoints
@@ -314,6 +408,9 @@ proceed (addr, signal, step)
       write_register (PC_REGNUM, addr);
 #ifdef NPC_REGNUM
       write_register (NPC_REGNUM, addr + 4);
+#ifdef NNPC_REGNUM
+      write_register (NNPC_REGNUM, addr + 8);
+#endif
 #endif
     }
 
@@ -344,17 +441,17 @@ The same program may be running in another process.");
     }
 
   /* Install inferior's terminal modes.  */
-  terminal_inferior ();
+  target_terminal_inferior ();
 
-  if (signal >= 0)
-    stop_signal = signal;
+  if (siggnal >= 0)
+    stop_signal = siggnal;
   /* If this signal should not be seen by program,
      give it zero.  Used for debugging signals.  */
   else if (stop_signal < NSIG && !signal_program[stop_signal])
     stop_signal= 0;
 
   /* Resume inferior.  */
-  resume (oneproc || step, stop_signal);
+  resume (oneproc || step || bpstat_should_step (), stop_signal);
 
   /* Wait for it to stop (if not standalone)
      and in any case decode why it stopped, and act accordingly.  */
@@ -363,65 +460,230 @@ The same program may be running in another process.");
   normal_stop ();
 }
 
-/* Writing the inferior pc as a register calls this function
-   to inform infrun that the pc has been set in the debugger.  */
+/* Record the pc and sp of the program the last time it stopped.
+   These are just used internally by wait_for_inferior, but need
+   to be preserved over calls to it and cleared when the inferior
+   is started.  */
+static CORE_ADDR prev_pc;
+static CORE_ADDR prev_sp;
+static CORE_ADDR prev_func_start;
+static char *prev_func_name;
+
+\f
+/* Start an inferior Unix child process and sets inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().  */
+
+#ifndef SHELL_FILE
+#define SHELL_FILE "/bin/sh"
+#endif
 
 void
-writing_pc (val)
-     CORE_ADDR val;
+child_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
 {
-  stop_pc = val;
-  pc_changed = 1;
-}
+  int pid;
+  char *shell_command;
+  char *shell_file;
+  static char default_shell_file[] = SHELL_FILE;
+  int len;
+  int pending_execs;
+  /* Set debug_fork then attach to the child while it sleeps, to debug. */
+  static int debug_fork = 0;
+  /* This is set to the result of setpgrp, which if vforked, will be visible
+     to you in the parent process.  It's only used by humans for debugging.  */
+  static int debug_setpgrp = 657473;
+  char **save_our_env;
+
+  /* The user might want tilde-expansion, and in general probably wants
+     the program to behave the same way as if run from
+     his/her favorite shell.  So we let the shell run it for us.
+     FIXME, this should probably search the local environment (as
+     modified by the setenv command), not the env gdb inherited.  */
+  shell_file = getenv ("SHELL");
+  if (shell_file == NULL)
+    shell_file = default_shell_file;
+  
+  len = 5 + strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop*/ 10;
+  /* If desired, concat something onto the front of ALLARGS.
+     SHELL_COMMAND is the result.  */
+#ifdef SHELL_COMMAND_CONCAT
+  shell_command = (char *) alloca (strlen (SHELL_COMMAND_CONCAT) + len);
+  strcpy (shell_command, SHELL_COMMAND_CONCAT);
+#else
+  shell_command = (char *) alloca (len);
+  shell_command[0] = '\0';
+#endif
+  strcat (shell_command, "exec ");
+  strcat (shell_command, exec_file);
+  strcat (shell_command, " ");
+  strcat (shell_command, allargs);
+
+  /* exec is said to fail if the executable is open.  */
+  close_exec_file ();
+
+  /* Retain a copy of our environment variables, since the child will
+     replace the value of  environ  and if we're vforked, we have to 
+     restore it.  */
+  save_our_env = environ;
+
+  /* Tell the terminal handling subsystem what tty we plan to run on;
+     it will just record the information for later.  */
+
+  new_tty_prefork (inferior_io_terminal);
+
+  /* It is generally good practice to flush any possible pending stdio
+     output prior to doing a fork, to avoid the possibility of both the
+     parent and child flushing the same data after the fork. */
+
+  fflush (stdout);
+  fflush (stderr);
+
+#if defined(USG) && !defined(HAVE_VFORK)
+  pid = fork ();
+#else
+  if (debug_fork)
+    pid = fork ();
+  else
+    pid = vfork ();
+#endif
+
+  if (pid < 0)
+    perror_with_name ("vfork");
+
+  if (pid == 0)
+    {
+      if (debug_fork) 
+       sleep (debug_fork);
+
+#ifdef TIOCGPGRP
+      /* Run inferior in a separate process group.  */
+#ifdef NEED_POSIX_SETPGID
+      debug_setpgrp = setpgid (0, 0);
+#else
+#if defined(USG) && !defined(SETPGRP_ARGS)
+      debug_setpgrp = setpgrp ();
+#else
+      debug_setpgrp = setpgrp (getpid (), getpid ());
+#endif /* USG */
+#endif /* NEED_POSIX_SETPGID */
+      if (debug_setpgrp == -1)
+        perror("setpgrp failed in child");
+#endif /* TIOCGPGRP */
+
+#ifdef SET_STACK_LIMIT_HUGE
+      /* Reset the stack limit back to what it was.  */
+      {
+       struct rlimit rlim;
+
+       getrlimit (RLIMIT_STACK, &rlim);
+       rlim.rlim_cur = original_stack_limit;
+       setrlimit (RLIMIT_STACK, &rlim);
+      }
+#endif /* SET_STACK_LIMIT_HUGE */
+
+      /* Ask the tty subsystem to switch to the one we specified earlier
+        (or to share the current terminal, if none was specified).  */
+
+      new_tty ();
+
+      /* Changing the signal handlers for the inferior after
+        a vfork can also change them for the superior, so we don't mess
+        with signals here.  See comments in
+        initialize_signals for how we get the right signal handlers
+        for the inferior.  */
+
+#ifdef USE_PROC_FS
+      /* Use SVR4 /proc interface */
+      proc_set_exec_trap ();
+#else
+      /* "Trace me, Dr. Memory!" */
+      call_ptrace (0, 0, (PTRACE_ARG3_TYPE) 0, 0);
+#endif
 
-/* Start an inferior process for the first time.
-   Actually it was started by the fork that created it,
-   but it will have stopped one instruction after execing sh.
+      /* There is no execlpe call, so we have to set the environment
+        for our child in the global variable.  If we've vforked, this
+        clobbers the parent, but environ is restored a few lines down
+        in the parent.  By the way, yes we do need to look down the
+        path to find $SHELL.  Rich Pixley says so, and I agree.  */
+      environ = env;
+      execlp (shell_file, shell_file, "-c", shell_command, (char *)0);
+
+      fprintf (stderr, "Cannot exec %s: %s.\n", shell_file,
+              safe_strerror (errno));
+      fflush (stderr);
+      _exit (0177);
+    }
+
+  /* Restore our environment in case a vforked child clob'd it.  */
+  environ = save_our_env;
+
+  /* Now that we have a child process, make it our target.  */
+  push_target (&child_ops);
+
+#ifdef CREATE_INFERIOR_HOOK
+  CREATE_INFERIOR_HOOK (pid);
+#endif  
+
+/* The process was started by the fork that created it,
+   but it will have stopped one instruction after execing the shell.
    Here we must get it up to actual execution of the real program.  */
 
-void
-start_inferior ()
-{
+  inferior_pid = pid;          /* Needed for wait_for_inferior stuff below */
+
+  clear_proceed_status ();
+
   /* We will get a trace trap after one instruction.
      Continue it automatically.  Eventually (after shell does an exec)
      it will get another trace trap.  Then insert breakpoints and continue.  */
 
 #ifdef START_INFERIOR_TRAPS_EXPECTED
-  trap_expected = START_INFERIOR_TRAPS_EXPECTED;
+  pending_execs = START_INFERIOR_TRAPS_EXPECTED;
 #else
-  trap_expected = 2;
+  pending_execs = 2;
 #endif
 
-  running_in_shell = 0;                /* Set to 1 at first SIGTRAP, 0 at second.  */
-  trap_expected_after_continue = 0;
-  breakpoints_inserted = 0;
-  mark_breakpoints_out ();
+  init_wait_for_inferior ();
 
   /* Set up the "saved terminal modes" of the inferior
      based on what modes we are starting it with.  */
-  terminal_init_inferior ();
+  target_terminal_init ();
 
   /* Install inferior's terminal modes.  */
-  terminal_inferior ();
+  target_terminal_inferior ();
 
-  if (remote_debugging)
-    {
-      trap_expected = 0;
-      fetch_inferior_registers();
-      set_current_frame (create_new_frame (read_register (FP_REGNUM),
-                                          read_pc ()));
-      stop_frame_address = FRAME_FP (get_current_frame());
-      inferior_pid = 3;
-      if (insert_breakpoints())
-       fatal("Can't insert breakpoints");
-      breakpoints_inserted = 1;
-      proceed(-1, -1, 0);
-    }
-  else
+  while (1)
     {
+      stop_soon_quietly = 1;   /* Make wait_for_inferior be quiet */
       wait_for_inferior ();
-      normal_stop ();
+      if (stop_signal != SIGTRAP)
+       {
+         /* Let shell child handle its own signals in its own way */
+         /* FIXME, what if child has exit()ed?  Must exit loop somehow */
+         resume (0, stop_signal);
+       }
+      else
+       {
+         /* We handle SIGTRAP, however; it means child did an exec.  */
+         if (0 == --pending_execs)
+           break;
+         resume (0, 0);                /* Just make it go on */
+       }
     }
+  stop_soon_quietly = 0;
+
+  /* We are now in the child process of interest, having exec'd the
+     correct program, and are poised at the first instruction of the
+     new program.  */
+#ifdef SOLIB_CREATE_INFERIOR_HOOK
+  SOLIB_CREATE_INFERIOR_HOOK (pid);
+#endif
+
+  /* Pedal to the metal.  Away we go.  */
+  proceed ((CORE_ADDR) -1, 0, 0);
 }
 
 /* Start remote-debugging of a machine over a serial link.  */
@@ -429,38 +691,90 @@ start_inferior ()
 void
 start_remote ()
 {
+  init_wait_for_inferior ();
   clear_proceed_status ();
-  running_in_shell = 0;
+  stop_soon_quietly = 1;
   trap_expected = 0;
-  inferior_pid = 3;
+  wait_for_inferior ();
+  normal_stop ();
+}
+
+/* Initialize static vars when a new inferior begins.  */
+
+void
+init_wait_for_inferior ()
+{
+  /* These are meaningless until the first time through wait_for_inferior.  */
+  prev_pc = 0;
+  prev_sp = 0;
+  prev_func_start = 0;
+  prev_func_name = NULL;
+
+  trap_expected_after_continue = 0;
   breakpoints_inserted = 0;
   mark_breakpoints_out ();
-  wait_for_inferior ();
-  normal_stop();
+  stop_signal = 0;             /* Don't confuse first call to proceed(). */
 }
 
-#ifdef ATTACH_DETACH
 
 /* Attach to process PID, then initialize for debugging it
    and wait for the trace-trap that results from attaching.  */
 
 void
-attach_program (pid)
-     int pid;
+child_attach (args, from_tty)
+     char *args;
+     int from_tty;
 {
+  char *exec_file;
+  int pid;
+
+  dont_repeat();
+
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+#ifndef ATTACH_DETACH
+  error ("Can't attach to a process on this machine.");
+#else
+  pid = atoi (args);
+
+  if (pid == getpid())         /* Trying to masturbate? */
+    error ("I refuse to debug myself!");
+
+  if (target_has_execution)
+    {
+      if (query ("A program is being debugged already.  Kill it? "))
+       target_kill ();
+      else
+       error ("Inferior not killed.");
+    }
+
+  exec_file = (char *) get_exec_file (1);
+
+  if (from_tty)
+    {
+      printf ("Attaching program: %s pid %d\n",
+             exec_file, pid);
+      fflush (stdout);
+    }
+
   attach (pid);
   inferior_pid = pid;
+  push_target (&child_ops);
 
   mark_breakpoints_out ();
-  terminal_init_inferior ();
+  target_terminal_init ();
   clear_proceed_status ();
-  stop_after_attach = 1;
+  stop_soon_quietly = 1;
   /*proceed (-1, 0, -2);*/
-  terminal_inferior ();
+  target_terminal_inferior ();
   wait_for_inferior ();
+#ifdef SOLIB_ADD
+  SOLIB_ADD ((char *)0, from_tty, (struct target_ops *)0);
+#endif
   normal_stop ();
+#endif  /* ATTACH_DETACH */
 }
-#endif /* ATTACH_DETACH */
 \f
 /* Wait for control to return from inferior to debugger.
    If inferior gets a signal, we may decide to start it up again
@@ -468,59 +782,54 @@ attach_program (pid)
    When this function actually returns it means the inferior
    should be left stopped and GDB should read more commands.  */
 
-static void
+void
 wait_for_inferior ()
 {
-  register int pid;
   WAITTYPE w;
-  CORE_ADDR pc;
-  int tem;
   int another_trap;
   int random_signal;
-  CORE_ADDR stop_sp, prev_sp;
-  CORE_ADDR prev_func_start, stop_func_start;
-  char *prev_func_name, *stop_func_name;
-  CORE_ADDR prologue_pc;
+  CORE_ADDR stop_sp;
+  CORE_ADDR stop_func_start;
+  char *stop_func_name;
+  CORE_ADDR prologue_pc, tmp;
   int stop_step_resume_break;
-  CORE_ADDR step_resume_break_sp;
-  int newmisc;
-  int newfun_pc;
   struct symtab_and_line sal;
-  int prev_pc;
-  extern CORE_ADDR text_end;
   int remove_breakpoints_on_following_step = 0;
+  int current_line;
+  int handling_longjmp = 0;    /* FIXME */
 
-  prev_pc = read_pc ();
-  (void) find_pc_partial_function (prev_pc, &prev_func_name,
-                                  &prev_func_start);
-  prev_func_start += FUNCTION_START_OFFSET;
-  prev_sp = read_register (SP_REGNUM);
+  sal = find_pc_line(prev_pc, 0);
+  current_line = sal.line;
 
   while (1)
     {
       /* Clean up saved state that will become invalid.  */
       pc_changed = 0;
       flush_cached_frames ();
+      registers_changed ();
 
-      if (remote_debugging)
-       remote_wait (&w);
-      else
-       {
-         pid = wait (&w);
-         if (pid != inferior_pid)
-           continue;
-       }
+      target_wait (&w);
+
+#ifdef SIGTRAP_STOP_AFTER_LOAD
+
+      /* Somebody called load(2), and it gave us a "trap signal after load".
+         Ignore it gracefully. */
+
+      SIGTRAP_STOP_AFTER_LOAD (w);
+#endif
 
       /* See if the process still exists; clean up if it doesn't.  */
       if (WIFEXITED (w))
        {
-         terminal_ours_for_output ();
-         if (WRETCODE (w))
-           printf ("\nProgram exited with code 0%o.\n", WRETCODE (w));
+         target_terminal_ours ();      /* Must do this before mourn anyway */
+         if (WEXITSTATUS (w))
+           printf_filtered ("\nProgram exited with code 0%o.\n", 
+                    (unsigned int)WEXITSTATUS (w));
          else
-           printf ("\nProgram exited normally.\n");
+           if (!batch_mode())
+             printf_filtered ("\nProgram exited normally.\n");
          fflush (stdout);
-         inferior_died ();
+         target_mourn_inferior ();
 #ifdef NO_SINGLE_STEP
          one_stepped = 0;
 #endif
@@ -529,16 +838,18 @@ wait_for_inferior ()
        }
       else if (!WIFSTOPPED (w))
        {
-         kill_inferior ();
          stop_print_frame = 0;
          stop_signal = WTERMSIG (w);
-         terminal_ours_for_output ();
-         printf ("\nProgram terminated with signal %d, %s\n",
-                 stop_signal,
-                 stop_signal < NSIG
-                 ? sys_siglist[stop_signal]
-                 : "(undocumented)");
-         printf ("The inferior process no longer exists.\n");
+         target_terminal_ours ();      /* Must do this before mourn anyway */
+         target_kill ();               /* kill mourns as well */
+#ifdef PRINT_RANDOM_SIGNAL
+         printf_filtered ("\nProgram terminated: ");
+         PRINT_RANDOM_SIGNAL (stop_signal);
+#else
+         printf_filtered ("\nProgram terminated with signal %d, %s\n",
+                          stop_signal, safe_strsignal (stop_signal));
+#endif
+         printf_filtered ("The inferior process no longer exists.\n");
          fflush (stdout);
 #ifdef NO_SINGLE_STEP
          one_stepped = 0;
@@ -551,7 +862,6 @@ wait_for_inferior ()
        single_step (0);        /* This actually cleans up the ss */
 #endif /* NO_SINGLE_STEP */
       
-      fetch_inferior_registers ();
       stop_pc = read_pc ();
       set_current_frame ( create_new_frame (read_register (FP_REGNUM),
                                            read_pc ()));
@@ -562,11 +872,10 @@ wait_for_inferior ()
       stop_func_name = 0;
       /* Don't care about return value; stop_func_start and stop_func_name
         will both be 0 if it doesn't work.  */
-      (void) find_pc_partial_function (stop_pc, &stop_func_name,
-                                      &stop_func_start);
+      find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start);
       stop_func_start += FUNCTION_START_OFFSET;
       another_trap = 0;
-      stop_breakpoint = 0;
+      bpstat_clear (&stop_bpstat);
       stop_step = 0;
       stop_stack_dummy = 0;
       stop_print_frame = 1;
@@ -595,39 +904,52 @@ wait_for_inferior ()
       if (stop_signal == SIGTRAP
          || (breakpoints_inserted &&
              (stop_signal == SIGILL
-              || stop_signal == SIGEMT))
-         || stop_after_attach)
+#ifdef SIGEMT
+              || stop_signal == SIGEMT
+#endif
+            ))
+         || stop_soon_quietly)
        {
          if (stop_signal == SIGTRAP && stop_after_trap)
            {
              stop_print_frame = 0;
              break;
            }
-         if (stop_after_attach)
+         if (stop_soon_quietly)
            break;
+
          /* Don't even think about breakpoints
-            if still running the shell that will exec the program
-            or if just proceeded over a breakpoint.  */
-         if (stop_signal == SIGTRAP && trap_expected)
-           stop_breakpoint = 0;
+            if just proceeded over a breakpoint.
+
+            However, if we are trying to proceed over a breakpoint
+            and end up in sigtramp, then step_resume_break_address
+            will be set and we should check whether we've hit the
+            step breakpoint.  */
+         if (stop_signal == SIGTRAP && trap_expected
+             && step_resume_break_address == 0)
+           bpstat_clear (&stop_bpstat);
          else
            {
              /* See if there is a breakpoint at the current PC.  */
 #if DECR_PC_AFTER_BREAK
              /* Notice the case of stepping through a jump
-                that leads just after a breakpoint.
+                that lands just after a breakpoint.
                 Don't confuse that with hitting the breakpoint.
                 What we check for is that 1) stepping is going on
                 and 2) the pc before the last insn does not match
                 the address of the breakpoint before the current pc.  */
-             if (!(prev_pc != stop_pc - DECR_PC_AFTER_BREAK
-                   && step_range_end && !step_resume_break_address))
+             if (prev_pc == stop_pc - DECR_PC_AFTER_BREAK
+                 || !step_range_end
+                 || step_resume_break_address
+                 || handling_longjmp /* FIXME */)
 #endif /* DECR_PC_AFTER_BREAK not zero */
                {
                  /* See if we stopped at the special breakpoint for
-                    stepping over a subroutine call.  */
-                 if (stop_pc - DECR_PC_AFTER_BREAK
-                     == step_resume_break_address)
+                    stepping over a subroutine call.  If both are zero,
+                    this wasn't the reason for the stop.  */
+                 if (step_resume_break_address
+                     && stop_pc - DECR_PC_AFTER_BREAK
+                        == step_resume_break_address)
                    {
                      stop_step_resume_break = 1;
                      if (DECR_PC_AFTER_BREAK)
@@ -639,45 +961,31 @@ wait_for_inferior ()
                    }
                  else
                    {
-                     stop_breakpoint =
-                       breakpoint_stop_status (stop_pc, stop_frame_address);
+                     stop_bpstat =
+                       bpstat_stop_status (&stop_pc, stop_frame_address);
                      /* Following in case break condition called a
                         function.  */
                      stop_print_frame = 1;
-                     if (stop_breakpoint && DECR_PC_AFTER_BREAK)
-                       {
-                         stop_pc -= DECR_PC_AFTER_BREAK;
-                         write_register (PC_REGNUM, stop_pc);
-#ifdef NPC_REGNUM
-                         write_register (NPC_REGNUM, stop_pc + 4);
-#endif
-                         pc_changed = 0;
-                       }
                    }
                }
            }
          
          if (stop_signal == SIGTRAP)
            random_signal
-             = !(stop_breakpoint || trap_expected
+             = !(bpstat_explains_signal (stop_bpstat)
+                 || trap_expected
                  || stop_step_resume_break
-#ifndef CANNOT_EXECUTE_STACK
-                 || (stop_sp INNER_THAN stop_pc
-                     && stop_pc INNER_THAN stop_frame_address)
-#else
-                 || stop_pc == text_end - 2
-#endif
+                 || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
                  || (step_range_end && !step_resume_break_address));
          else
            {
              random_signal
-               = !(stop_breakpoint
+               = !(bpstat_explains_signal (stop_bpstat)
                    || stop_step_resume_break
-#ifdef sony_news
-                   || (stop_sp INNER_THAN stop_pc
-                       && stop_pc INNER_THAN stop_frame_address)
-#endif
-                   
+                   /* End of a stack dummy.  Some systems (e.g. Sony
+                      news) give another signal besides SIGTRAP,
+                      so check here as well as above.  */
+                   || PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address)
                    );
              if (!random_signal)
                stop_signal = SIGTRAP;
@@ -689,8 +997,7 @@ wait_for_inferior ()
       /* For the program's own signals, act according to
         the signal handling tables.  */
       
-      if (random_signal
-         && !(running_in_shell && stop_signal == SIGSEGV))
+      if (random_signal)
        {
          /* Signal not for debugging purposes.  */
          int printed = 0;
@@ -701,12 +1008,13 @@ wait_for_inferior ()
              || signal_print[stop_signal])
            {
              printed = 1;
-             terminal_ours_for_output ();
-             printf ("\nProgram received signal %d, %s\n",
-                     stop_signal,
-                     stop_signal < NSIG
-                     ? sys_siglist[stop_signal]
-                     : "(undocumented)");
+             target_terminal_ours_for_output ();
+#ifdef PRINT_RANDOM_SIGNAL
+             PRINT_RANDOM_SIGNAL (stop_signal);
+#else
+             printf_filtered ("\nProgram received signal %d, %s\n",
+                              stop_signal, safe_strsignal (stop_signal));
+#endif /* PRINT_RANDOM_SIGNAL */
              fflush (stdout);
            }
          if (stop_signal >= NSIG
@@ -715,82 +1023,142 @@ wait_for_inferior ()
          /* If not going to stop, give terminal back
             if we took it away.  */
          else if (printed)
-           terminal_inferior ();
+           target_terminal_inferior ();
+
+         /* Note that virtually all the code below does `if !random_signal'.
+            Perhaps this code should end with a goto or continue.  At least
+            one (now fixed) bug was caused by this -- a !random_signal was
+            missing in one of the tests below.  */
        }
-      
+
       /* Handle cases caused by hitting a breakpoint.  */
-      
-      if (!random_signal
-         && (stop_breakpoint || stop_step_resume_break))
-       {
-         /* Does a breakpoint want us to stop?  */
-         if (stop_breakpoint && stop_breakpoint != -1
-             && stop_breakpoint != -0x1000001)
-           {
-             /* 0x1000000 is set in stop_breakpoint as returned by
-                breakpoint_stop_status to indicate a silent
-                breakpoint.  */
-             if ((stop_breakpoint > 0 ? stop_breakpoint :
-                  -stop_breakpoint)
-                 & 0x1000000)
-               {
-                 stop_print_frame = 0;
-                 if (stop_breakpoint > 0)
-                   stop_breakpoint -= 0x1000000;
-                 else
-                   stop_breakpoint += 0x1000000;
-               }
-             break;
-           }
-         /* But if we have hit the step-resumption breakpoint,
-            remove it.  It has done its job getting us here.
-            The sp test is to make sure that we don't get hung
-            up in recursive calls in functions without frame
-            pointers.  If the stack pointer isn't outside of
-            where the breakpoint was set (within a routine to be
-            stepped over), we're in the middle of a recursive
-            call. Not true for reg window machines (sparc)
-            because the must change frames to call things and
-            the stack pointer doesn't have to change if it
-            the bp was set in a routine without a frame (pc can
-            be stored in some other window).
-            
-            The removal of the sp test is to allow calls to
-            alloca.  Nasty things were happening.  Oh, well,
-            gdb can only handle one level deep of lack of
-            frame pointer. */
-         if (stop_step_resume_break
-             && (step_frame_address == 0
-                 || (stop_frame_address == step_frame_address)))
-           {
-             remove_step_breakpoint ();
-             step_resume_break_address = 0;
-           }
-         /* Otherwise, must remove breakpoints and single-step
-            to get us past the one we hit.  */
-         else
-           {
-             remove_breakpoints ();
-             remove_step_breakpoint ();
-             breakpoints_inserted = 0;
-             another_trap = 1;
-           }
-         
-         /* We come here if we hit a breakpoint but should not
-            stop for it.  Possibly we also were stepping
-            and should stop for that.  So fall through and
-            test for stepping.  But, if not stepping,
-            do not stop.  */
-       }
-      
+
+      if (!random_signal)
+       if (bpstat_explains_signal (stop_bpstat))
+         {
+           CORE_ADDR jmp_buf_pc;
+
+           switch (stop_bpstat->breakpoint_at->type) /* FIXME */
+             {
+               /* If we hit the breakpoint at longjmp, disable it for the
+                  duration of this command.  Then, install a temporary
+                  breakpoint at the target of the jmp_buf. */
+             case bp_longjmp:
+               disable_longjmp_breakpoint();
+               remove_breakpoints ();
+               breakpoints_inserted = 0;
+               if (!GET_LONGJMP_TARGET(&jmp_buf_pc)) goto keep_going;
+
+               /* Need to blow away step-resume breakpoint, as it
+                  interferes with us */
+               remove_step_breakpoint ();
+               step_resume_break_address = 0;
+               stop_step_resume_break = 0;
+
+#if 0                          /* FIXME - Need to implement nested temporary breakpoints */
+               if (step_over_calls > 0)
+                 set_longjmp_resume_breakpoint(jmp_buf_pc,
+                                               get_current_frame());
+               else
+#endif                         /* 0 */
+                 set_longjmp_resume_breakpoint(jmp_buf_pc, NULL);
+               handling_longjmp = 1; /* FIXME */
+               goto keep_going;
+
+             case bp_longjmp_resume:
+               remove_breakpoints ();
+               breakpoints_inserted = 0;
+#if 0                          /* FIXME - Need to implement nested temporary breakpoints */
+               if (step_over_calls
+                   && (stop_frame_address
+                       INNER_THAN step_frame_address))
+                 {
+                   another_trap = 1;
+                   goto keep_going;
+                 }
+#endif                         /* 0 */
+               disable_longjmp_breakpoint();
+               handling_longjmp = 0; /* FIXME */
+               break;
+
+             default:
+               fprintf(stderr, "Unknown breakpoint type %d\n",
+                       stop_bpstat->breakpoint_at->type);
+             case bp_watchpoint:
+             case bp_breakpoint:
+             case bp_until:
+             case bp_finish:
+               /* Does a breakpoint want us to stop?  */
+               if (bpstat_stop (stop_bpstat))
+                 {
+                   stop_print_frame = bpstat_should_print (stop_bpstat);
+                   goto stop_stepping;
+                 }
+               /* Otherwise, must remove breakpoints and single-step
+                  to get us past the one we hit.  */
+               else
+                 {
+                   remove_breakpoints ();
+                   remove_step_breakpoint ();
+                   breakpoints_inserted = 0;
+                   another_trap = 1;
+                 }
+               break;
+             }
+         }
+       else if (stop_step_resume_break)
+         {
+           /* But if we have hit the step-resumption breakpoint,
+              remove it.  It has done its job getting us here.
+              The sp test is to make sure that we don't get hung
+              up in recursive calls in functions without frame
+              pointers.  If the stack pointer isn't outside of
+              where the breakpoint was set (within a routine to be
+              stepped over), we're in the middle of a recursive
+              call. Not true for reg window machines (sparc)
+              because the must change frames to call things and
+              the stack pointer doesn't have to change if it
+              the bp was set in a routine without a frame (pc can
+              be stored in some other window).
+              
+              The removal of the sp test is to allow calls to
+              alloca.  Nasty things were happening.  Oh, well,
+              gdb can only handle one level deep of lack of
+              frame pointer. */
+
+           /*
+             Disable test for step_frame_address match so that we always stop even if the
+             frames don't match.  Reason: if we hit the step_resume_breakpoint, there is
+             no way to temporarily disable it so that we can step past it.  If we leave
+             the breakpoint in, then we loop forever repeatedly hitting, but never
+             getting past the breakpoint.  This change keeps nexting over recursive
+             function calls from hanging gdb.
+             */
+#if 0
+           if (* step_frame_address == 0
+               || (step_frame_address == stop_frame_address))
+#endif
+             {
+               remove_step_breakpoint ();
+               step_resume_break_address = 0;
+
+               /* If were waiting for a trap, hitting the step_resume_break
+                  doesn't count as getting it.  */
+               if (trap_expected)
+                 another_trap = 1;
+             }
+         }
+
+      /* We come here if we hit a breakpoint but should not
+        stop for it.  Possibly we also were stepping
+        and should stop for that.  So fall through and
+        test for stepping.  But, if not stepping,
+        do not stop.  */
+
       /* If this is the breakpoint at the end of a stack dummy,
         just stop silently.  */
-#ifndef CANNOT_EXECUTE_STACK
-      if (stop_sp INNER_THAN stop_pc
-         && stop_pc INNER_THAN stop_frame_address)
-#else
-       if (stop_pc == text_end - 2)
-#endif
+      if (!random_signal 
+        && PC_IN_CALL_DUMMY (stop_pc, stop_sp, stop_frame_address))
          {
            stop_print_frame = 0;
            stop_stack_dummy = 1;
@@ -819,13 +1187,7 @@ wait_for_inferior ()
                    && (stop_sp INNER_THAN prev_sp
                        || stop_frame_address != step_frame_address)))
        {
-         /* Don't step through the return from a function
-            unless that is the first instruction stepped through.  */
-         if (ABOUT_TO_RETURN (stop_pc))
-           {
-             stop_step = 1;
-             break;
-           }
+         ;
        }
       
       /* We stepped out of the stepping range.  See if that was due
@@ -842,12 +1204,14 @@ wait_for_inferior ()
          if (IN_SIGTRAMP (stop_pc, stop_func_name)
              && !IN_SIGTRAMP (prev_pc, prev_func_name))
            {
+             /* This code is needed at least in the following case:
+                The user types "next" and then a signal arrives (before
+                the "next" is done).  */
              /* We've just taken a signal; go until we are back to
                 the point where we took it and one more.  */
              step_resume_break_address = prev_pc;
              step_resume_break_duplicate =
                breakpoint_here_p (step_resume_break_address);
-             step_resume_break_sp = stop_sp;
              if (breakpoints_inserted)
                insert_step_breakpoint ();
              /* Make sure that the stepping range gets us past
@@ -855,92 +1219,160 @@ wait_for_inferior ()
              if (step_range_end == 1)
                step_range_end = (step_range_start = prev_pc) + 1;
              remove_breakpoints_on_following_step = 1;
+             goto save_pc;
            }
 
          /* ==> See comments at top of file on this algorithm.  <==*/
          
-         else if (stop_pc == stop_func_start
+         if ((stop_pc == stop_func_start
+              || IN_SOLIB_TRAMPOLINE (stop_pc, stop_func_name))
              && (stop_func_start != prev_func_start
                  || prologue_pc != stop_func_start
                  || stop_sp != prev_sp))
            {
-             /* It's a subroutine call */
-             if (step_over_calls > 0 
-                 || (step_over_calls &&  find_pc_function (stop_pc) == 0))
+             /* It's a subroutine call.
+                (0)  If we are not stepping over any calls ("stepi"), we
+                     just stop.
+                (1)  If we're doing a "next", we want to continue through
+                     the call ("step over the call").
+                (2)  If we are in a function-call trampoline (a stub between
+                     the calling routine and the real function), locate
+                     the real function and change stop_func_start.
+                (3)  If we're doing a "step", and there are no debug symbols
+                     at the target of the call, we want to continue through
+                     it ("step over the call").
+                (4)  Otherwise, we want to stop soon, after the function
+                     prologue ("step into the call"). */
+
+             if (step_over_calls == 0)
                {
-                 /* A subroutine call has happened.  */
-                 /* Set a special breakpoint after the return */
-                 step_resume_break_address =
-                   SAVED_PC_AFTER_CALL (get_current_frame ());
-                 step_resume_break_duplicate
-                   = breakpoint_here_p (step_resume_break_address);
-                 step_resume_break_sp = stop_sp;
-                 if (breakpoints_inserted)
-                   insert_step_breakpoint ();
+                 /* I presume that step_over_calls is only 0 when we're
+                    supposed to be stepping at the assembly language level. */
+                 stop_step = 1;
+                 break;
                }
+
+             if (step_over_calls > 0)
+               goto step_over_function;
+
+             tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+             if (tmp != 0)
+               stop_func_start = tmp;
+
+             if (find_pc_function (stop_func_start) != 0)
+               goto step_into_function;
+
+step_over_function:
+             /* A subroutine call has happened.  */
+             /* Set a special breakpoint after the return */
+             step_resume_break_address =
+               ADDR_BITS_REMOVE
+                 (SAVED_PC_AFTER_CALL (get_current_frame ()));
+             step_resume_break_duplicate
+               = breakpoint_here_p (step_resume_break_address);
+             if (breakpoints_inserted)
+               insert_step_breakpoint ();
+             goto save_pc;
+
+step_into_function:
              /* Subroutine call with source code we should not step over.
                 Do step to the first line of code in it.  */
-             else if (step_over_calls)
-               {
-                 SKIP_PROLOGUE (stop_func_start);
-                 sal = find_pc_line (stop_func_start, 0);
-                 /* Use the step_resume_break to step until
-                    the end of the prologue, even if that involves jumps
-                    (as it seems to on the vax under 4.2).  */
-                 /* If the prologue ends in the middle of a source line,
-                    continue to the end of that source line.
-                    Otherwise, just go to end of prologue.  */
+             SKIP_PROLOGUE (stop_func_start);
+             sal = find_pc_line (stop_func_start, 0);
+             /* Use the step_resume_break to step until
+                the end of the prologue, even if that involves jumps
+                (as it seems to on the vax under 4.2).  */
+             /* If the prologue ends in the middle of a source line,
+                continue to the end of that source line.
+                Otherwise, just go to end of prologue.  */
 #ifdef PROLOGUE_FIRSTLINE_OVERLAP
-                 /* no, don't either.  It skips any code that's
-                    legitimately on the first line.  */
+             /* no, don't either.  It skips any code that's
+                legitimately on the first line.  */
 #else
-                 if (sal.end && sal.pc != stop_func_start)
-                   stop_func_start = sal.end;
+             if (sal.end && sal.pc != stop_func_start)
+               stop_func_start = sal.end;
 #endif
-                 
-                 if (stop_func_start == stop_pc)
-                   {
-                     /* We are already there: stop now.  */
-                     stop_step = 1;
-                     break;
-                   }
-                 else
-                   /* Put the step-breakpoint there and go until there. */
-                   {
-                     step_resume_break_address = stop_func_start;
-                     step_resume_break_sp = stop_sp;
-                     
-                     step_resume_break_duplicate
-                       = breakpoint_here_p (step_resume_break_address);
-                     if (breakpoints_inserted)
-                       insert_step_breakpoint ();
-                     /* Do not specify what the fp should be when we stop
-                        since on some machines the prologue
-                        is where the new fp value is established.  */
-                     step_frame_address = 0;
-                     /* And make sure stepping stops right away then.  */
-                     step_range_end = step_range_start;
-                   }
-               }
-             else
+
+             if (stop_func_start == stop_pc)
                {
-                 /* We get here only if step_over_calls is 0 and we
-                    just stepped into a subroutine.  I presume
-                    that step_over_calls is only 0 when we're
-                    supposed to be stepping at the assembly
-                    language level.*/
+                 /* We are already there: stop now.  */
                  stop_step = 1;
                  break;
+               }       
+             else
+               /* Put the step-breakpoint there and go until there. */
+               {
+                 step_resume_break_address = stop_func_start;
+                 
+                 step_resume_break_duplicate
+                   = breakpoint_here_p (step_resume_break_address);
+                 if (breakpoints_inserted)
+                   insert_step_breakpoint ();
+                 /* Do not specify what the fp should be when we stop
+                    since on some machines the prologue
+                    is where the new fp value is established.  */
+                 step_frame_address = 0;
+                 /* And make sure stepping stops right away then.  */
+                 step_range_end = step_range_start;
                }
+             goto save_pc;
            }
-         /* No subroutince call; stop now.  */
-         else
-           {
-             stop_step = 1;
-             break;
-           }
+
+         /* We've wandered out of the step range (but haven't done a
+            subroutine call or return).  */
+
+         sal = find_pc_line(stop_pc, 0);
+         
+         if (step_range_end == 1 ||    /* stepi or nexti */
+             sal.line == 0 ||          /* ...or no line # info */
+             (stop_pc == sal.pc        /* ...or we're at the start */
+              && current_line != sal.line)) {  /* of a different line */
+           /* Stop because we're done stepping.  */
+           stop_step = 1;
+           break;
+         } else {
+           /* We aren't done stepping, and we have line number info for $pc.
+              Optimize by setting the step_range for the line.  
+              (We might not be in the original line, but if we entered a
+              new line in mid-statement, we continue stepping.  This makes 
+              things like for(;;) statements work better.)  */
+           step_range_start = sal.pc;
+           step_range_end = sal.end;
+           goto save_pc;
+         }
+         /* We never fall through here */
+       }
+
+      if (trap_expected
+         && IN_SIGTRAMP (stop_pc, stop_func_name)
+         && !IN_SIGTRAMP (prev_pc, prev_func_name))
+       {
+         /* What has happened here is that we have just stepped the inferior
+            with a signal (because it is a signal which shouldn't make
+            us stop), thus stepping into sigtramp.
+
+            So we need to set a step_resume_break_address breakpoint
+            and continue until we hit it, and then step.  */
+         step_resume_break_address = prev_pc;
+         /* Always 1, I think, but it's probably easier to have
+            the step_resume_break as usual rather than trying to
+            re-use the breakpoint which is already there.  */
+         step_resume_break_duplicate =
+           breakpoint_here_p (step_resume_break_address);
+         if (breakpoints_inserted)
+           insert_step_breakpoint ();
+         remove_breakpoints_on_following_step = 1;
+         another_trap = 1;
        }
 
+/* My apologies to the gods of structured programming. */
+/* Come to this label when you need to resume the inferior.  It's really much
+   cleaner at this time to do a goto than to try and figure out what the
+   if-else chain ought to look like!! */
+
+    keep_going:
+
+save_pc:
       /* Save the pc before execution, to compare with pc after stop.  */
       prev_pc = read_pc ();    /* Might have been DECR_AFTER_BREAK */
       prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER
@@ -954,39 +1386,29 @@ wait_for_inferior ()
       /* If we did not do break;, it means we should keep
         running the inferior and not return to debugger.  */
 
-      /* If trap_expected is 2, it means continue once more
-        and insert breakpoints at the next trap.
-        If trap_expected is 1 and the signal was SIGSEGV, it means
-        the shell is doing some memory allocation--just resume it
-        with SIGSEGV.
-        Otherwise insert breakpoints now, and possibly single step.  */
-
-      if (trap_expected > 1)
-       {
-         trap_expected--;
-         running_in_shell = 1;
-         resume (0, 0);
-       }
-      else if (running_in_shell && stop_signal == SIGSEGV)
-       {
-         resume (0, SIGSEGV);
-       }
-      else if (trap_expected && stop_signal != SIGTRAP)
+      if (trap_expected && stop_signal != SIGTRAP)
        {
-         /* We took a signal which we are supposed to pass through to
-            the inferior and we haven't yet gotten our trap.  Simply
-            continue.  */
+         /* We took a signal (which we are supposed to pass through to
+            the inferior, else we'd have done a break above) and we
+            haven't yet gotten our trap.  Simply continue.  */
          resume ((step_range_end && !step_resume_break_address)
-                 || trap_expected,
+                 || (trap_expected && !step_resume_break_address)
+                 || bpstat_should_step (),
                  stop_signal);
        }
       else
        {
-         /* Here, we are not awaiting another exec to get
-            the program we really want to debug.
+         /* Either the trap was not expected, but we are continuing
+            anyway (the user asked that this signal be passed to the
+            child)
+              -- or --
+            The signal was SIGTRAP, e.g. it was our signal, but we
+            decided we should resume from it.
+
+            We're going to run this baby now!
+
             Insert breakpoints now, unless we are trying
             to one-proceed past a breakpoint.  */
-         running_in_shell = 0;
          /* If we've just finished a special step resume and we don't
             want to hit a breakpoint, pull em out.  */
          if (!step_resume_break_address &&
@@ -996,7 +1418,8 @@ wait_for_inferior ()
              remove_breakpoints ();
              breakpoints_inserted = 0;
            }
-         else if (!breakpoints_inserted && !another_trap)
+         else if (!breakpoints_inserted &&
+                  (step_resume_break_address != 0 || !another_trap))
            {
              insert_step_breakpoint ();
              breakpoints_failed = insert_breakpoints ();
@@ -1010,49 +1433,81 @@ wait_for_inferior ()
          if (stop_signal == SIGTRAP)
            stop_signal = 0;
 
-         resume ((step_range_end && !step_resume_break_address)
-                 || trap_expected,
+#ifdef SHIFT_INST_REGS
+         /* I'm not sure when this following segment applies.  I do know, now,
+            that we shouldn't rewrite the regs when we were stopped by a
+            random signal from the inferior process.  */
+
+          if (!bpstat_explains_signal (stop_bpstat)
+             && (stop_signal != SIGCLD) 
+              && !stopped_by_random_signal)
+            {
+            CORE_ADDR pc_contents = read_register (PC_REGNUM);
+            CORE_ADDR npc_contents = read_register (NPC_REGNUM);
+            if (pc_contents != npc_contents)
+              {
+              write_register (NNPC_REGNUM, npc_contents);
+              write_register (NPC_REGNUM, pc_contents);
+             }
+            }
+#endif /* SHIFT_INST_REGS */
+
+         resume ((!step_resume_break_address
+                  && !handling_longjmp
+                  && (step_range_end
+                      || trap_expected))
+                 || bpstat_should_step (),
                  stop_signal);
        }
     }
+
+ stop_stepping:
+  if (target_has_execution)
+    {
+      /* Assuming the inferior still exists, set these up for next
+        time, just like we did above if we didn't break out of the
+        loop.  */
+      prev_pc = read_pc ();
+      prev_func_start = stop_func_start;
+      prev_func_name = stop_func_name;
+      prev_sp = stop_sp;
+    }
 }
 \f
 /* Here to return control to GDB when the inferior stops for real.
    Print appropriate messages, remove breakpoints, give terminal our modes.
 
-   RUNNING_IN_SHELL nonzero means the shell got a signal before
-   exec'ing the program we wanted to run.
    STOP_PRINT_FRAME nonzero means print the executing frame
    (pc, function, args, file, line number and line text).
    BREAKPOINTS_FAILED nonzero means stop was due to error
    attempting to insert breakpoints.  */
 
-static void
+void
 normal_stop ()
 {
   /* Make sure that the current_frame's pc is correct.  This
      is a correction for setting up the frame info before doing
      DECR_PC_AFTER_BREAK */
-  if (inferior_pid)
+  if (target_has_execution)
     (get_current_frame ())->pc = read_pc ();
   
   if (breakpoints_failed)
     {
-      terminal_ours_for_output ();
+      target_terminal_ours_for_output ();
       print_sys_errmsg ("ptrace", breakpoints_failed);
-      printf ("Stopped; cannot insert breakpoints.\n\
+      printf_filtered ("Stopped; cannot insert breakpoints.\n\
 The same program may be running in another process.\n");
     }
 
-  if (inferior_pid)
+  if (target_has_execution)
     remove_step_breakpoint ();
 
-  if (inferior_pid && breakpoints_inserted)
+  if (target_has_execution && breakpoints_inserted)
     if (remove_breakpoints ())
       {
-       terminal_ours_for_output ();
-       printf ("Cannot remove breakpoints because program is no longer writable.\n\
-It must be running in another process.\n\
+       target_terminal_ours_for_output ();
+       printf_filtered ("Cannot remove breakpoints because program is no longer writable.\n\
+It might be running in another process.\n\
 Further execution is probably impossible.\n");
       }
 
@@ -1061,7 +1516,7 @@ Further execution is probably impossible.\n");
   /* Delete the breakpoint we stopped at, if it wants to be deleted.
      Delete any breakpoint that is to be deleted at the next stop.  */
 
-  breakpoint_auto_delete (stop_breakpoint);
+  breakpoint_auto_delete (stop_bpstat);
 
   /* If an auto-display called a function and that got a signal,
      delete that auto-display to avoid an infinite recursion.  */
@@ -1072,58 +1527,40 @@ Further execution is probably impossible.\n");
   if (step_multi && stop_step)
     return;
 
-  terminal_ours ();
+  target_terminal_ours ();
 
-  if (running_in_shell)
-    {
-      if (stop_signal == SIGSEGV)
-       {
-         char *exec_file = (char *) get_exec_file (1);
-
-         if (access (exec_file, X_OK) != 0)
-           printf ("The file \"%s\" is not executable.\n", exec_file);
-         else
-           printf ("\
-You have just encountered a bug in \"sh\".  GDB starts your program\n\
-by running \"sh\" with a command to exec your program.\n\
-This is so that \"sh\" will process wildcards and I/O redirection.\n\
-This time, \"sh\" crashed.\n\
-\n\
-One known bug in \"sh\" bites when the environment takes up a lot of space.\n\
-Try \"info env\" to see the environment; then use \"delete env\" to kill\n\
-some variables whose values are large; then do \"run\" again.\n\
-\n\
-If that works, you might want to put those \"delete env\" commands\n\
-into a \".gdbinit\" file in this directory so they will happen every time.\n");
-       }
-      /* Don't confuse user with his program's symbols on sh's data.  */
-      stop_print_frame = 0;
-    }
-
-  if (inferior_pid == 0)
+  if (!target_has_stack)
     return;
 
   /* Select innermost stack frame except on return from a stack dummy routine,
-     or if the program has exited.  */
+     or if the program has exited.  Print it without a level number if
+     we have changed functions or hit a breakpoint.  Print source line
+     if we have one.  */
   if (!stop_stack_dummy)
     {
       select_frame (get_current_frame (), 0);
 
       if (stop_print_frame)
        {
-         if (stop_breakpoint > 0)
-           printf ("\nBpt %d, ", stop_breakpoint);
-         print_sel_frame (stop_step
-                          && step_frame_address == stop_frame_address
-                          && step_start_function == find_pc_function (stop_pc));
+         int source_only;
+
+         source_only = bpstat_print (stop_bpstat);
+         source_only = source_only ||
+               (   stop_step
+                && step_frame_address == stop_frame_address
+                && step_start_function == find_pc_function (stop_pc));
+
+          print_stack_frame (selected_frame, -1, source_only? -1: 1);
+
          /* Display the auto-display expressions.  */
          do_displays ();
        }
     }
 
-  /* Save the function value return registers
+  /* Save the function value return registers, if we care.
      We might be about to restore their previous contents.  */
-  read_register_bytes (0, stop_registers, REGISTER_BYTES);
+  if (proceed_to_finish)
+    read_register_bytes (0, stop_registers, REGISTER_BYTES);
 
   if (stop_stack_dummy)
     {
@@ -1139,22 +1576,58 @@ static void
 insert_step_breakpoint ()
 {
   if (step_resume_break_address && !step_resume_break_duplicate)
-    {
-      read_memory (step_resume_break_address,
-                  step_resume_break_shadow, sizeof break_insn);
-      write_memory (step_resume_break_address,
-                   break_insn, sizeof break_insn);
-    }
+    target_insert_breakpoint (step_resume_break_address,
+                             step_resume_break_shadow);
 }
 
 static void
 remove_step_breakpoint ()
 {
   if (step_resume_break_address && !step_resume_break_duplicate)
-    write_memory (step_resume_break_address, step_resume_break_shadow,
-                 sizeof break_insn);
+    target_remove_breakpoint (step_resume_break_address,
+                             step_resume_break_shadow);
 }
 \f
+int signal_stop_state (signo)
+     int signo;
+{
+  return ((signo >= 0 && signo < NSIG) ? signal_stop[signo] : 0);
+}
+
+int signal_print_state (signo)
+     int signo;
+{
+  return ((signo >= 0 && signo < NSIG) ? signal_print[signo] : 0);
+}
+
+int signal_pass_state (signo)
+     int signo;
+{
+  return ((signo >= 0 && signo < NSIG) ? signal_program[signo] : 0);
+}
+
+static void
+sig_print_header ()
+{
+  printf_filtered ("Signal\t\tStop\tPrint\tPass to program\tDescription\n");
+}
+
+static void
+sig_print_info (number)
+     int number;
+{
+  char *name;
+
+  if ((name = strsigno (number)) == NULL)
+    printf_filtered ("%d\t\t", number);
+  else
+    printf_filtered ("%s (%d)\t", name, number);
+  printf_filtered ("%s\t", signal_stop[number] ? "Yes" : "No");
+  printf_filtered ("%s\t", signal_print[number] ? "Yes" : "No");
+  printf_filtered ("%s\t\t", signal_program[number] ? "Yes" : "No");
+  printf_filtered ("%s\n", safe_strsignal (number));
+}
+
 /* Specify how various signals in the inferior should be handled.  */
 
 static void
@@ -1162,105 +1635,193 @@ handle_command (args, from_tty)
      char *args;
      int from_tty;
 {
-  register char *p = args;
-  int signum = 0;
-  register int digits, wordlen;
+  char **argv;
+  int digits, wordlen;
+  int sigfirst, signum, siglast;
+  int allsigs;
+  int nsigs;
+  unsigned char *sigs;
+  struct cleanup *old_chain;
+
+  if (args == NULL)
+    {
+      error_no_arg ("signal to handle");
+    }
 
-  if (!args)
-    error_no_arg ("signal to handle");
+  /* Allocate and zero an array of flags for which signals to handle. */
 
-  while (*p)
+  nsigs = signo_max () + 1;
+  sigs = (unsigned char *) alloca (nsigs);
+  memset (sigs, 0, nsigs);
+
+  /* Break the command line up into args. */
+
+  argv = buildargv (args);
+  if (argv == NULL)
+    {
+      nomem (0);
+    }
+  old_chain = make_cleanup (freeargv, (char *) argv);
+
+  /* Walk through the args, looking for signal numbers, signal names, and
+     actions.  Signal numbers and signal names may be interspersed with
+     actions, with the actions being performed for all signals cumulatively
+     specified.  Signal ranges can be specified as <LOW>-<HIGH>. */
+
+  while (*argv != NULL)
     {
-      /* Find the end of the next word in the args.  */
-      for (wordlen = 0; p[wordlen] && p[wordlen] != ' ' && p[wordlen] != '\t';
-          wordlen++);
-      for (digits = 0; p[digits] >= '0' && p[digits] <= '9'; digits++);
+      wordlen = strlen (*argv);
+      for (digits = 0; isdigit ((*argv)[digits]); digits++) {;}
+      allsigs = 0;
+      sigfirst = siglast = -1;
 
-      /* If it is all digits, it is signal number to operate on.  */
-      if (digits == wordlen)
+      if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
+       {
+         /* Apply action to all signals except those used by the
+            debugger.  Silently skip those. */
+         allsigs = 1;
+         sigfirst = 0;
+         siglast = nsigs - 1;
+       }
+      else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+       {
+         SET_SIGS (nsigs, sigs, signal_stop);
+         SET_SIGS (nsigs, sigs, signal_print);
+       }
+      else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+       {
+         UNSET_SIGS (nsigs, sigs, signal_program);
+       }
+      else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+       {
+         SET_SIGS (nsigs, sigs, signal_print);
+       }
+      else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+       {
+         SET_SIGS (nsigs, sigs, signal_program);
+       }
+      else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+       {
+         UNSET_SIGS (nsigs, sigs, signal_stop);
+       }
+      else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+       {
+         SET_SIGS (nsigs, sigs, signal_program);
+       }
+      else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+       {
+         UNSET_SIGS (nsigs, sigs, signal_print);
+         UNSET_SIGS (nsigs, sigs, signal_stop);
+       }
+      else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
        {
-         signum = atoi (p);
-         if (signum <= 0 || signum >= NSIG)
+         UNSET_SIGS (nsigs, sigs, signal_program);
+       }
+      else if (digits > 0)
+       {
+         sigfirst = siglast = atoi (*argv);
+         if ((*argv)[digits] == '-')
+           {
+             siglast = atoi ((*argv) + digits + 1);
+           }
+         if (sigfirst > siglast)
+           {
+             /* Bet he didn't figure we'd think of this case... */
+             signum = sigfirst;
+             sigfirst = siglast;
+             siglast = signum;
+           }
+         if (sigfirst < 0 || sigfirst >= nsigs)
            {
-             p[wordlen] = '\0';
-             error ("Invalid signal %s given as argument to \"handle\".", p);
+             error ("Signal %d not in range 0-%d", sigfirst, nsigs - 1);
            }
-         if (signum == SIGTRAP || signum == SIGINT)
+         if (siglast < 0 || siglast >= nsigs)
            {
-             if (!query ("Signal %d is used by the debugger.\nAre you sure you want to change it? ", signum))
-               error ("Not confirmed.");
+             error ("Signal %d not in range 0-%d", siglast, nsigs - 1);
            }
        }
-      else if (signum == 0)
-       error ("First argument is not a signal number.");
-
-      /* Else, if already got a signal number, look for flag words
-        saying what to do for it.  */
-      else if (!strncmp (p, "stop", wordlen))
+      else if ((signum = strtosigno (*argv)) != 0)
        {
-         signal_stop[signum] = 1;
-         signal_print[signum] = 1;
+         sigfirst = siglast = signum;
        }
-      else if (wordlen >= 2 && !strncmp (p, "print", wordlen))
-       signal_print[signum] = 1;
-      else if (wordlen >= 2 && !strncmp (p, "pass", wordlen))
-       signal_program[signum] = 1;
-      else if (!strncmp (p, "ignore", wordlen))
-       signal_program[signum] = 0;
-      else if (wordlen >= 3 && !strncmp (p, "nostop", wordlen))
-       signal_stop[signum] = 0;
-      else if (wordlen >= 4 && !strncmp (p, "noprint", wordlen))
+      else
        {
-         signal_print[signum] = 0;
-         signal_stop[signum] = 0;
+         /* Not a number and not a recognized flag word => complain.  */
+         error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
        }
-      else if (wordlen >= 4 && !strncmp (p, "nopass", wordlen))
-       signal_program[signum] = 0;
-      else if (wordlen >= 3 && !strncmp (p, "noignore", wordlen))
-       signal_program[signum] = 1;
-      /* Not a number and not a recognized flag word => complain.  */
-      else
+
+      /* If any signal numbers or symbol names were found, set flags for
+        which signals to apply actions to. */
+
+      for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
        {
-         p[wordlen] = 0;
-         error ("Unrecognized flag word: \"%s\".", p);
+         switch (signum)
+           {
+             case SIGTRAP:
+             case SIGINT:
+               if (!allsigs && !sigs[signum])
+                 {
+                   if (query ("%s is used by the debugger.\nAre you sure you want to change it? ", strsigno (signum)))
+                     {
+                       sigs[signum] = 1;
+                     }
+                   else
+                     {
+                       printf ("Not confirmed, unchanged.\n");
+                       fflush (stdout);
+                     }
+                 }
+               break;
+             default:
+               sigs[signum] = 1;
+               break;
+           }
        }
 
-      /* Find start of next word.  */
-      p += wordlen;
-      while (*p == ' ' || *p == '\t') p++;
+      argv++;
     }
 
+  NOTICE_SIGNAL_HANDLING_CHANGE;
+
   if (from_tty)
     {
       /* Show the results.  */
-      printf ("Number\tStop\tPrint\tPass to program\tDescription\n");
-      printf ("%d\t", signum);
-      printf ("%s\t", signal_stop[signum] ? "Yes" : "No");
-      printf ("%s\t", signal_print[signum] ? "Yes" : "No");
-      printf ("%s\t\t", signal_program[signum] ? "Yes" : "No");
-      printf ("%s\n", sys_siglist[signum]);
+      sig_print_header ();
+      for (signum = 0; signum < nsigs; signum++)
+       {
+         if (sigs[signum])
+           {
+             sig_print_info (signum);
+           }
+       }
     }
+
+  do_cleanups (old_chain);
 }
 
 /* Print current contents of the tables set by the handle command.  */
 
 static void
-signals_info (signum_exp)
+signals_info (signum_exp, from_tty)
      char *signum_exp;
+     int from_tty;
 {
   register int i;
-  printf_filtered ("Number\tStop\tPrint\tPass to program\tDescription\n");
+  sig_print_header ();
 
   if (signum_exp)
     {
-      i = parse_and_eval_address (signum_exp);
-      if (i >= NSIG || i < 0)
-       error ("Signal number out of bounds.");
-      printf_filtered ("%d\t", i);
-      printf_filtered ("%s\t", signal_stop[i] ? "Yes" : "No");
-      printf_filtered ("%s\t", signal_print[i] ? "Yes" : "No");
-      printf_filtered ("%s\t\t", signal_program[i] ? "Yes" : "No");
-      printf_filtered ("%s\n", sys_siglist[i]);
+      /* First see if this is a symbol name.  */
+      i = strtosigno (signum_exp);
+      if (i == 0)
+       {
+         /* Nope, maybe it's an address which evaluates to a signal
+            number.  */
+         i = parse_and_eval_address (signum_exp);
+         if (i >= NSIG || i < 0)
+           error ("Signal number out of bounds.");
+       }
+      sig_print_info (i);
       return;
     }
 
@@ -1269,11 +1830,7 @@ signals_info (signum_exp)
     {
       QUIT;
 
-      printf_filtered ("%d\t", i);
-      printf_filtered ("%s\t", signal_stop[i] ? "Yes" : "No");
-      printf_filtered ("%s\t", signal_print[i] ? "Yes" : "No");
-      printf_filtered ("%s\t\t", signal_program[i] ? "Yes" : "No");
-      printf_filtered ("%s\n", sys_siglist[i]);
+      sig_print_info (i);
     }
 
   printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
@@ -1283,8 +1840,6 @@ signals_info (signum_exp)
    connection.  INF_STATUS is a pointer to a "struct inferior_status"
    (defined in inferior.h).  */
 
-struct command_line *get_breakpoint_commands ();
-
 void
 save_inferior_status (inf_status, restore_stack_info)
      struct inferior_status *inf_status;
@@ -1294,7 +1849,6 @@ save_inferior_status (inf_status, restore_stack_info)
   inf_status->stop_signal = stop_signal;
   inf_status->stop_pc = stop_pc;
   inf_status->stop_frame_address = stop_frame_address;
-  inf_status->stop_breakpoint = stop_breakpoint;
   inf_status->stop_step = stop_step;
   inf_status->stop_stack_dummy = stop_stack_dummy;
   inf_status->stopped_by_random_signal = stopped_by_random_signal;
@@ -1305,11 +1859,17 @@ save_inferior_status (inf_status, restore_stack_info)
   inf_status->step_over_calls = step_over_calls;
   inf_status->step_resume_break_address = step_resume_break_address;
   inf_status->stop_after_trap = stop_after_trap;
-  inf_status->stop_after_attach = stop_after_attach;
-  inf_status->breakpoint_commands = get_breakpoint_commands ();
+  inf_status->stop_soon_quietly = stop_soon_quietly;
+  /* Save original bpstat chain here; replace it with copy of chain. 
+     If caller's caller is walking the chain, they'll be happier if we
+     hand them back the original chain when restore_i_s is called.  */
+  inf_status->stop_bpstat = stop_bpstat;
+  stop_bpstat = bpstat_copy (stop_bpstat);
+  inf_status->breakpoint_proceeded = breakpoint_proceeded;
   inf_status->restore_stack_info = restore_stack_info;
+  inf_status->proceed_to_finish = proceed_to_finish;
   
-  bcopy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
+  memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
   
   record_selected_frame (&(inf_status->selected_frame_address),
                         &(inf_status->selected_level));
@@ -1327,7 +1887,6 @@ restore_inferior_status (inf_status)
   stop_signal = inf_status->stop_signal;
   stop_pc = inf_status->stop_pc;
   stop_frame_address = inf_status->stop_frame_address;
-  stop_breakpoint = inf_status->stop_breakpoint;
   stop_step = inf_status->stop_step;
   stop_stack_dummy = inf_status->stop_stack_dummy;
   stopped_by_random_signal = inf_status->stopped_by_random_signal;
@@ -1338,27 +1897,43 @@ restore_inferior_status (inf_status)
   step_over_calls = inf_status->step_over_calls;
   step_resume_break_address = inf_status->step_resume_break_address;
   stop_after_trap = inf_status->stop_after_trap;
-  stop_after_attach = inf_status->stop_after_attach;
-  set_breakpoint_commands (inf_status->breakpoint_commands);
+  stop_soon_quietly = inf_status->stop_soon_quietly;
+  bpstat_clear (&stop_bpstat);
+  stop_bpstat = inf_status->stop_bpstat;
+  breakpoint_proceeded = inf_status->breakpoint_proceeded;
+  proceed_to_finish = inf_status->proceed_to_finish;
 
-  bcopy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+  memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
 
-  if (inf_status->restore_stack_info)
+  /* The inferior can be gone if the user types "print exit(0)"
+     (and perhaps other times).  */
+  if (target_has_stack && inf_status->restore_stack_info)
     {
       fid = find_relative_frame (get_current_frame (),
                                 &level);
-      
-      if (FRAME_FP (fid) != inf_status->selected_frame_address ||
+
+      /* If inf_status->selected_frame_address is NULL, there was no
+        previously selected frame.  */
+      if (fid == 0 ||
+         FRAME_FP (fid) != inf_status->selected_frame_address ||
          level != 0)
        {
+#if 1
+         /* I'm not sure this error message is a good idea.  I have
+            only seen it occur after "Can't continue previously
+            requested operation" (we get called from do_cleanups), in
+            which case it just adds insult to injury (one confusing
+            error message after another.  Besides which, does the
+            user really care if we can't restore the previously
+            selected frame?  */
          fprintf (stderr, "Unable to restore previously selected frame.\n");
+#endif
          select_frame (get_current_frame (), 0);
          return;
        }
       
       select_frame (fid, inf_status->selected_level);
     }
-  return;
 }
 
 \f
@@ -1366,22 +1941,36 @@ void
 _initialize_infrun ()
 {
   register int i;
+  register int numsigs;
 
   add_info ("signals", signals_info,
            "What debugger does when program gets various signals.\n\
 Specify a signal number as argument to print info on that signal only.");
+  add_info_alias ("handle", "signals", 0);
 
   add_com ("handle", class_run, handle_command,
           "Specify how to handle a signal.\n\
-Args are signal number followed by flags.\n\
-Flags allowed are \"stop\", \"print\", \"pass\",\n\
- \"nostop\", \"noprint\" or \"nopass\".\n\
-Print means print a message if this signal happens.\n\
+Args are signal numbers and actions to apply to those signals.\n\
+Signal numbers may be numeric (ex. 11) or symbolic (ex. SIGSEGV).\n\
+Numeric ranges may be specified with the form LOW-HIGH (ex. 14-21).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
 Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
 Pass means let program see this signal; otherwise program doesn't know.\n\
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
 Pass and Stop may be combined.");
 
-  for (i = 0; i < NSIG; i++)
+  numsigs = signo_max () + 1;
+  signal_stop    = (unsigned char *)    
+                  xmalloc (sizeof (signal_stop[0]) * numsigs);
+  signal_print   = (unsigned char *)
+                  xmalloc (sizeof (signal_print[0]) * numsigs);
+  signal_program = (unsigned char *)
+                  xmalloc (sizeof (signal_program[0]) * numsigs);
+  for (i = 0; i < numsigs; i++)
     {
       signal_stop[i] = 1;
       signal_print[i] = 1;
@@ -1423,4 +2012,3 @@ Pass and Stop may be combined.");
   signal_print[SIGURG] = 0;
 #endif /* SIGURG */
 }
-
This page took 0.049259 seconds and 4 git commands to generate.