/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
- 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
- Software Foundation, Inc.
+ Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GDB.
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
-/* We can't step off a permanent breakpoint in the ordinary way, because we
- can't remove it. Instead, we have to advance the PC to the next
- instruction. This macro should expand to a pointer to a function that
- does that, or zero if we have no such function. If we don't have a
- definition for it, we have to report an error. */
-#ifndef SKIP_PERMANENT_BREAKPOINT
-#define SKIP_PERMANENT_BREAKPOINT (default_skip_permanent_breakpoint)
-static void
-default_skip_permanent_breakpoint (void)
-{
- error (_("\
-The program is stopped at a permanent breakpoint, but GDB does not know\n\
-how to step past a permanent breakpoint on this architecture. Try using\n\
-a command like `return' or `jump' to continue execution."));
-}
-#endif
-
/* Convert the #defines into values. This is temporary until wfi control
flow is completely sorted out. */
-#ifndef HAVE_STEPPABLE_WATCHPOINT
-#define HAVE_STEPPABLE_WATCHPOINT 0
-#else
-#undef HAVE_STEPPABLE_WATCHPOINT
-#define HAVE_STEPPABLE_WATCHPOINT 1
-#endif
-
#ifndef CANNOT_STEP_HW_WATCHPOINTS
#define CANNOT_STEP_HW_WATCHPOINTS 0
#else
struct regcache *stop_registers;
-/* Nonzero if program stopped due to error trying to insert breakpoints. */
-
-static int breakpoints_failed;
-
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
/* The thread we inserted single-step breakpoints for. */
static ptid_t singlestep_ptid;
+/* PC when we started this single-step. */
+static CORE_ADDR singlestep_pc;
+
/* If another thread hit the singlestep breakpoint, we save the original
thread here so that we can resume single-stepping it later. */
static ptid_t saved_singlestep_ptid;
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (read_pc ()) == permanent_breakpoint_here)
- SKIP_PERMANENT_BREAKPOINT ();
+ {
+ if (gdbarch_skip_permanent_breakpoint_p (current_gdbarch))
+ gdbarch_skip_permanent_breakpoint (current_gdbarch,
+ get_current_regcache ());
+ else
+ error (_("\
+The program is stopped at a permanent breakpoint, but GDB does not know\n\
+how to step past a permanent breakpoint on this architecture. Try using\n\
+a command like `return' or `jump' to continue execution."));
+ }
if (SOFTWARE_SINGLE_STEP_P () && step)
{
/* Do it the hard way, w/temp breakpoints */
- SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints */ );
- /* ...and don't ask hardware to do it. */
- step = 0;
- /* and do not pull these breakpoints until after a `wait' in
- `wait_for_inferior' */
- singlestep_breakpoints_inserted_p = 1;
- singlestep_ptid = inferior_ptid;
+ if (SOFTWARE_SINGLE_STEP (get_current_frame ()))
+ {
+ /* ...and don't ask hardware to do it. */
+ step = 0;
+ /* and do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ singlestep_ptid = inferior_ptid;
+ singlestep_pc = read_pc ();
+ }
}
/* If there were any forks/vforks/execs that were caught and are
resume_ptid = inferior_ptid;
}
- if (CANNOT_STEP_BREAKPOINT)
+ if (gdbarch_cannot_step_breakpoint (current_gdbarch))
{
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
/* FIXME: This stuff came from switch_to_thread() in
thread.c (which should probably be a public function). */
- flush_cached_frames ();
+ reinit_frame_cache ();
registers_changed ();
stop_pc = wait_pc;
- select_frame (get_current_frame ());
}
/* We return 1 to indicate that there is a breakpoint here,
/* Start remote-debugging of a machine over a serial link. */
void
-start_remote (void)
+start_remote (int from_tty)
{
init_thread_list ();
init_wait_for_inferior ();
is currently running and GDB state should be set to the same as
for an async run. */
wait_for_inferior ();
+
+ /* Now that the inferior has stopped, do any bookkeeping like
+ loading shared libraries. We want to do this before normal_stop,
+ so that the displayed frame is up to date. */
+ post_create_inferior (¤t_target, from_tty);
+
normal_stop ();
}
to the interface from within handle_inferior_event(). */
enum inferior_stop_reason
{
- /* We don't know why. */
- STOP_UNKNOWN,
/* Step, next, nexti, stepi finished. */
END_STEPPING_RANGE,
- /* Found breakpoint. */
- BREAKPOINT_HIT,
/* Inferior terminated by signal. */
SIGNAL_EXITED,
/* Inferior exited. */
be lost. This may happen as a result of the target module
mishandling thread creation. */
+ if (debug_infrun)
+ {
+ fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ",
+ target_pid_to_str (inferior_ptid));
+ fprintf_unfiltered (gdb_stdlog, "to %s\n",
+ target_pid_to_str (ecs->ptid));
+ }
+
if (in_thread_list (inferior_ptid) && in_thread_list (ecs->ptid))
{ /* Perform infrun state context switch: */
/* Save infrun state for the old thread. */
&ecs->current_line, &ecs->current_symtab);
}
inferior_ptid = ecs->ptid;
+ reinit_frame_cache ();
}
static void
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
- if (DECR_PC_AFTER_BREAK == 0)
+ if (gdbarch_decr_pc_after_break (current_gdbarch) == 0)
return;
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
we aren't, just return.
We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
- affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
- by software breakpoints should be handled through the normal breakpoint
- layer.
+ affected by gdbarch_decr_pc_after_break. Other waitkinds which are
+ implemented by software breakpoints should be handled through the normal
+ breakpoint layer.
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
- DECR_PC_AFTER_BREAK. I don't know any specific target that generates
- these signals at breakpoints (the code has been in GDB since at least
- 1992) so I can not guess how to handle them here.
+ gdbarch_decr_pc_after_break. I don't know any specific target that
+ generates these signals at breakpoints (the code has been in GDB since at
+ least 1992) so I can not guess how to handle them here.
- In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
- would have the PC after hitting a watchpoint affected by
- DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
- in GDB history, and it seems unlikely to be correct, so
- HAVE_NONSTEPPABLE_WATCHPOINTS is not checked here. */
+ In earlier versions of GDB, a target with
+ gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a
+ watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any
+ target with both of these set in GDB history, and it seems unlikely to be
+ correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */
if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
return;
/* Find the location where (if we've hit a breakpoint) the
breakpoint would be. */
- breakpoint_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
+ breakpoint_pc = read_pc_pid (ecs->ptid) - gdbarch_decr_pc_after_break
+ (current_gdbarch);
if (SOFTWARE_SINGLE_STEP_P ())
{
}
ecs->infwait_state = infwait_normal_state;
- flush_cached_frames ();
+ reinit_frame_cache ();
/* If it's a new process, add it to the thread database */
(LONGEST) ecs->ws.value.integer));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */
stop_print_frame = 0;
stop_stepping (ecs);
return;
target_mourn_inferior ();
print_stop_reason (SIGNAL_EXITED, stop_signal);
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */
stop_stepping (ecs);
return;
pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ {
+ context_switch (ecs);
+ reinit_frame_cache ();
+ }
+
stop_pc = read_pc ();
stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
if (inferior_ignoring_leading_exec_events)
{
inferior_ignoring_leading_exec_events--;
- if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
- ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.
- parent_pid);
target_resume (ecs->ptid, 0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
inferior_ptid = ecs->saved_inferior_ptid;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ {
+ context_switch (ecs);
+ reinit_frame_cache ();
+ }
+
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
ecs->random_signal = 0;
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
+ /* We have not context switched yet, so this should be true
+ no matter which thread hit the singlestep breakpoint. */
+ gdb_assert (ptid_equal (inferior_ptid, singlestep_ptid));
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: software single step "
+ "trap for %s\n",
+ target_pid_to_str (ecs->ptid));
+
ecs->random_signal = 0;
/* The call to in_thread_list is necessary because PTIDs sometimes
change when we go from single-threaded to multi-threaded. If
if (!ptid_equal (singlestep_ptid, ecs->ptid)
&& in_thread_list (singlestep_ptid))
{
- thread_hop_needed = 1;
- stepping_past_singlestep_breakpoint = 1;
- saved_singlestep_ptid = singlestep_ptid;
+ /* If the PC of the thread we were trying to single-step
+ has changed, discard this event (which we were going
+ to ignore anyway), and pretend we saw that thread
+ trap. This prevents us continuously moving the
+ single-step breakpoint forward, one instruction at a
+ time. If the PC has changed, then the thread we were
+ trying to single-step has trapped or been signalled,
+ but the event has not been reported to GDB yet.
+
+ There might be some cases where this loses signal
+ information, if a signal has arrived at exactly the
+ same time that the PC changed, but this is the best
+ we can do with the information available. Perhaps we
+ should arrange to report all events for all threads
+ when they stop, or to re-poll the remote looking for
+ this particular thread (i.e. temporarily enable
+ schedlock). */
+ if (read_pc_pid (singlestep_ptid) != singlestep_pc)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
+ " but expected thread advanced also\n");
+
+ /* The current context still belongs to
+ singlestep_ptid. Don't swap here, since that's
+ the context we want to use. Just fudge our
+ state and continue. */
+ ecs->ptid = singlestep_ptid;
+ stop_pc = read_pc_pid (ecs->ptid);
+ }
+ else
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: unexpected thread\n");
+
+ thread_hop_needed = 1;
+ stepping_past_singlestep_breakpoint = 1;
+ saved_singlestep_ptid = singlestep_ptid;
+ }
}
}
if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
-
- flush_cached_frames ();
}
if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
/* It is far more common to need to disable a watchpoint to step
the inferior over it. FIXME. What else might a debug
register or page protection watchpoint scheme need here? */
- if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
+ if (gdbarch_have_nonsteppable_watchpoint (current_gdbarch)
+ && STOPPED_BY_WATCHPOINT (ecs->ws))
{
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
- ecs->stop_func_start += DEPRECATED_FUNCTION_START_OFFSET;
+ ecs->stop_func_start
+ += gdbarch_deprecated_function_start_offset (current_gdbarch);
ecs->another_trap = 0;
bpstat_clear (&stop_bpstat);
stop_step = 0;
stop_print_frame = 1;
ecs->random_signal = 0;
stopped_by_random_signal = 0;
- breakpoints_failed = 0;
if (stop_signal == TARGET_SIGNAL_TRAP
&& trap_expected
code paths as single-step - set a breakpoint at the
signal return address and then, once hit, step off that
breakpoint. */
+
insert_step_resume_breakpoint_at_frame (get_current_frame ());
ecs->step_after_step_resume_breakpoint = 1;
keep_going (ecs);
disable_longjmp_breakpoint ();
remove_breakpoints ();
breakpoints_inserted = 0;
- if (!GET_LONGJMP_TARGET_P () || !GET_LONGJMP_TARGET (&jmp_buf_pc))
+ if (!gdbarch_get_longjmp_target_p (current_gdbarch)
+ || !gdbarch_get_longjmp_target (current_gdbarch,
+ get_current_frame (), &jmp_buf_pc))
{
keep_going (ecs);
return;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
if (breakpoints_inserted)
- {
- remove_breakpoints ();
- }
+ remove_breakpoints ();
breakpoints_inserted = 0;
ecs->another_trap = 1;
/* Still need to check other stuff, at least the case
}
break;
- case BPSTAT_WHAT_THROUGH_SIGTRAMP:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_THROUGH_SIGTRAMP\n");
- /* If were waiting for a trap, hitting the step_resume_break
- doesn't count as getting it. */
- if (trap_expected)
- ecs->another_trap = 1;
- break;
-
case BPSTAT_WHAT_CHECK_SHLIBS:
case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
{
if (step_resume_breakpoint)
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: step-resume breakpoint\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: step-resume breakpoint is inserted\n");
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
function. That's what tells us (a) whether we want to step
into it at all, and (b) what prologue we want to run to the
end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (stop_pc);
+ real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc);
if (real_stop_pc == 0)
- real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
/* If we're in the return path from a shared library trampoline,
we want to proceed through the trampoline when stepping. */
- if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
+ if (gdbarch_in_solib_return_trampoline (current_gdbarch,
+ stop_pc, ecs->stop_func_name))
{
/* Determine where this trampoline returns. */
- CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ CORE_ADDR real_stop_pc;
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
- ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start);
+ ecs->stop_func_start = gdbarch_skip_prologue
+ (current_gdbarch, ecs->stop_func_start);
ecs->sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
keep_going (ecs);
}
-/* Insert a "step resume breakpoint" at SR_SAL with frame ID SR_ID.
+/* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID.
This is used to both functions and to skip over code. */
static void
thread, so we should never be setting a new
step_resume_breakpoint when one is already active. */
gdb_assert (step_resume_breakpoint == NULL);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: inserting step-resume breakpoint at 0x%s\n",
+ paddr_nz (sr_sal.pc));
+
step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
}
-/* Insert a "step resume breakpoint" at RETURN_FRAME.pc. This is used
+/* Insert a "step-resume breakpoint" at RETURN_FRAME.pc. This is used
to skip a potential signal handler.
This is called with the interrupted function's frame. The signal
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (return_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (next_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, frame_pc_unwind (next_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
if (!breakpoints_inserted && !ecs->another_trap)
{
- breakpoints_failed = insert_breakpoints ();
- if (breakpoints_failed)
+ /* Stop stepping when inserting breakpoints
+ has failed. */
+ if (insert_breakpoints () != 0)
{
stop_stepping (ecs);
return;
{
switch (stop_reason)
{
- case STOP_UNKNOWN:
- /* We don't deal with these cases from handle_inferior_event()
- yet. */
- break;
case END_STEPPING_RANGE:
/* We are done with a step/next/si/ni command. */
/* For now print nothing. */
(uiout, "reason",
async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
break;
- case BREAKPOINT_HIT:
- /* We found a breakpoint. */
- /* For now print nothing. */
- break;
case SIGNAL_EXITED:
/* The inferior was terminated by a signal. */
annotate_signalled ();
/* NOTE drow/2004-01-17: Is this still necessary? */
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
- DECR_PC_AFTER_BREAK */
+ gdbarch_decr_pc_after_break */
if (target_has_execution)
/* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
- DECR_PC_AFTER_BREAK, the program counter can change. Ask the
+ gdbarch_decr_pc_after_break, the program counter can change. Ask the
frame code to check for this and sort out any resultant mess.
- DECR_PC_AFTER_BREAK needs to just go away. */
+ gdbarch_decr_pc_after_break needs to just go away. */
deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
if (target_has_execution && breakpoints_inserted)
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
- if (stop_print_frame && deprecated_selected_frame)
+ if (stop_print_frame)
{
int bpstat_ret;
int source_flag;
default:
internal_error (__FILE__, __LINE__, _("Unknown value."));
}
- /* For mi, have the same behavior every time we stop:
- print everything but the source line. */
- if (ui_out_is_mi_like_p (uiout))
- source_flag = LOC_AND_ADDRESS;
if (ui_out_is_mi_like_p (uiout))
ui_out_field_int (uiout, "thread-id",
if (proceed_to_finish)
/* NB: The copy goes through to the target picking up the value of
all the registers. */
- regcache_cpy (stop_registers, current_regcache);
+ regcache_cpy (stop_registers, get_current_regcache ());
if (stop_stack_dummy)
{
inf_status->stop_registers = regcache_dup_no_passthrough (stop_registers);
- inf_status->registers = regcache_dup (current_regcache);
+ inf_status->registers = regcache_dup (get_current_regcache ());
- inf_status->selected_frame_id = get_frame_id (deprecated_selected_frame);
+ inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
return inf_status;
}
(and perhaps other times). */
if (target_has_execution)
/* NB: The register write goes through to the target. */
- regcache_cpy (current_regcache, inf_status->registers);
+ regcache_cpy (get_current_regcache (), inf_status->registers);
regcache_xfree (inf_status->registers);
/* FIXME: If we are being called after stopping in a function which