/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
- 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
- Software Foundation, Inc.
+ Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
+#include "exceptions.h"
#include "breakpoint.h"
#include "gdb_wait.h"
#include "gdbcore.h"
#include "value.h"
#include "observer.h"
#include "language.h"
+#include "solib.h"
+#include "main.h"
+
#include "gdb_assert.h"
+#include "mi/mi-common.h"
/* Prototypes for local functions */
no line number information. The normal behavior is that we step
over such function. */
int step_stop_if_no_debug = 0;
+static void
+show_step_stop_if_no_debug (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
+}
/* In asynchronous mode, but simulating synchronous execution. */
static int may_follow_exec = MAY_FOLLOW_EXEC;
+static int debug_infrun = 0;
+static void
+show_debug_infrun (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Inferior debugging is %s.\n"), value);
+}
+
/* If the program uses ELF-style shared libraries, then calls to
functions in shared libraries go through stubs, which live in a
table called the PLT (Procedure Linkage Table). The first time the
signalling an error, which will obscure the change in the
inferior's state. */
-#ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE
-#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0
-#endif
-
/* This function returns TRUE if pc is the address of an instruction
that lies within the dynamic linker (such as the event hook, or the
dld itself).
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
-/* On some systems, the PC may be left pointing at an instruction that won't
- actually be executed. This is usually indicated by a bit in the PSW. If
- we find ourselves in such a state, then we step the target beyond the
- nullified instruction before returning control to the user so as to avoid
- confusion. */
-
-#ifndef INSTRUCTION_NULLIFIED
-#define INSTRUCTION_NULLIFIED 0
-#endif
-
-/* We can't step off a permanent breakpoint in the ordinary way, because we
- can't remove it. Instead, we have to advance the PC to the next
- instruction. This macro should expand to a pointer to a function that
- does that, or zero if we have no such function. If we don't have a
- definition for it, we have to report an error. */
-#ifndef SKIP_PERMANENT_BREAKPOINT
-#define SKIP_PERMANENT_BREAKPOINT (default_skip_permanent_breakpoint)
-static void
-default_skip_permanent_breakpoint (void)
-{
- error ("\
-The program is stopped at a permanent breakpoint, but GDB does not know\n\
-how to step past a permanent breakpoint on this architecture. Try using\n\
-a command like `return' or `jump' to continue execution.");
-}
-#endif
-
/* Convert the #defines into values. This is temporary until wfi control
flow is completely sorted out. */
-#ifndef HAVE_STEPPABLE_WATCHPOINT
-#define HAVE_STEPPABLE_WATCHPOINT 0
-#else
-#undef HAVE_STEPPABLE_WATCHPOINT
-#define HAVE_STEPPABLE_WATCHPOINT 1
-#endif
-
#ifndef CANNOT_STEP_HW_WATCHPOINTS
#define CANNOT_STEP_HW_WATCHPOINTS 0
#else
static int trap_expected;
-#ifdef SOLIB_ADD
/* Nonzero if we want to give control to the user when we're notified
of shared library events by the dynamic linker. */
static int stop_on_solib_events;
-#endif
+static void
+show_stop_on_solib_events (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Stopping for shared library events is %s.\n"),
+ value);
+}
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
struct regcache *stop_registers;
-/* Nonzero if program stopped due to error trying to insert breakpoints. */
-
-static int breakpoints_failed;
-
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
static struct breakpoint *step_resume_breakpoint = NULL;
-/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
- interactions with an inferior that is running a kernel function
- (aka, a system call or "syscall"). wait_for_inferior therefore
- may have a need to know when the inferior is in a syscall. This
- is a count of the number of inferior threads which are known to
- currently be running in a syscall. */
-static int number_of_threads_in_syscalls;
-
/* This is a cached copy of the pid/waitstatus of the last event
returned by target_wait()/deprecated_target_wait_hook(). This
information is returned by get_last_target_status(). */
};
static const char *follow_fork_mode_string = follow_fork_mode_parent;
+static void
+show_follow_fork_mode_string (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Debugger response to a program call of fork or vfork is \"%s\".\n"),
+ value);
+}
\f
static int
step_range_end = 0;
/* What is this a.out's name? */
- printf_unfiltered ("Executing new program: %s\n", execd_pathname);
+ printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
tgt = find_run_target ();
/* If we can't find one, things are in a very strange state... */
if (tgt == NULL)
- error ("Could find run target to save before following exec");
+ error (_("Could find run target to save before following exec"));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
#endif
#ifdef SOLIB_CREATE_INFERIOR_HOOK
SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
+#else
+ solib_create_inferior_hook ();
#endif
/* Reinsert all breakpoints. (Those which were symbolic have
/* The thread we inserted single-step breakpoints for. */
static ptid_t singlestep_ptid;
+/* PC when we started this single-step. */
+static CORE_ADDR singlestep_pc;
+
/* If another thread hit the singlestep breakpoint, we save the original
thread here so that we can resume single-stepping it later. */
static ptid_t saved_singlestep_ptid;
static const char schedlock_off[] = "off";
static const char schedlock_on[] = "on";
static const char schedlock_step[] = "step";
-static const char *scheduler_mode = schedlock_off;
static const char *scheduler_enums[] = {
schedlock_off,
schedlock_on,
schedlock_step,
NULL
};
+static const char *scheduler_mode = schedlock_off;
+static void
+show_scheduler_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Mode for locking scheduler during execution is \"%s\".\n"),
+ value);
+}
static void
set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
{
- /* NOTE: cagney/2002-03-17: The deprecated_add_show_from_set()
- function clones the set command passed as a parameter. The clone
- operation will include (BUG?) any ``set'' command callback, if
- present. Commands like ``info set'' call all the ``show''
- command callbacks. Unfortunately, for ``show'' commands cloned
- from ``set'', this includes callbacks belonging to ``set''
- commands. Making this worse, this only occures if
- deprecated_add_show_from_set() is called after add_cmd_sfunc()
- (BUG?). */
- if (cmd_type (c) == set_cmd)
- if (!target_can_lock_scheduler)
- {
- scheduler_mode = schedlock_off;
- error ("Target '%s' cannot support this command.", target_shortname);
- }
+ if (!target_can_lock_scheduler)
+ {
+ scheduler_mode = schedlock_off;
+ error (_("Target '%s' cannot support this command."), target_shortname);
+ }
}
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
+ step, sig);
+
/* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (read_pc ()) == permanent_breakpoint_here)
- SKIP_PERMANENT_BREAKPOINT ();
+ {
+ if (gdbarch_skip_permanent_breakpoint_p (current_gdbarch))
+ gdbarch_skip_permanent_breakpoint (current_gdbarch,
+ get_current_regcache ());
+ else
+ error (_("\
+The program is stopped at a permanent breakpoint, but GDB does not know\n\
+how to step past a permanent breakpoint on this architecture. Try using\n\
+a command like `return' or `jump' to continue execution."));
+ }
if (SOFTWARE_SINGLE_STEP_P () && step)
{
/* Do it the hard way, w/temp breakpoints */
- SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints */ );
- /* ...and don't ask hardware to do it. */
- step = 0;
- /* and do not pull these breakpoints until after a `wait' in
- `wait_for_inferior' */
- singlestep_breakpoints_inserted_p = 1;
- singlestep_ptid = inferior_ptid;
+ if (SOFTWARE_SINGLE_STEP (get_current_frame ()))
+ {
+ /* ...and don't ask hardware to do it. */
+ step = 0;
+ /* and do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ singlestep_ptid = inferior_ptid;
+ singlestep_pc = read_pc ();
+ }
}
/* If there were any forks/vforks/execs that were caught and are
resume_ptid = inferior_ptid;
}
- if (CANNOT_STEP_BREAKPOINT)
+ if (gdbarch_cannot_step_breakpoint (current_gdbarch))
{
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
/* FIXME: This stuff came from switch_to_thread() in
thread.c (which should probably be a public function). */
- flush_cached_frames ();
+ reinit_frame_cache ();
registers_changed ();
stop_pc = wait_pc;
- select_frame (get_current_frame ());
}
/* We return 1 to indicate that there is a breakpoint here,
if (addr == (CORE_ADDR) -1)
{
- /* If there is a breakpoint at the address we will resume at,
- step one instruction before inserting breakpoints
- so that we do not stop right away (and report a second
- hit at this breakpoint). */
-
if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ /* There is a breakpoint at the address we will resume at,
+ step one instruction before inserting breakpoints so that
+ we do not stop right away (and report a second hit at this
+ breakpoint). */
oneproc = 1;
-
-#ifndef STEP_SKIPS_DELAY
-#define STEP_SKIPS_DELAY(pc) (0)
-#define STEP_SKIPS_DELAY_P (0)
-#endif
- /* Check breakpoint_here_p first, because breakpoint_here_p is fast
- (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
- is slow (it needs to read memory from the target). */
- if (STEP_SKIPS_DELAY_P
- && breakpoint_here_p (read_pc () + 4)
- && STEP_SKIPS_DELAY (read_pc ()))
+ else if (gdbarch_single_step_through_delay_p (current_gdbarch)
+ && gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ()))
+ /* We stepped onto an instruction that needs to be stepped
+ again before re-inserting the breakpoint, do so. */
oneproc = 1;
}
else
write_pc (addr);
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
+ paddr_nz (addr), siggnal, step);
+
/* In a multi-threaded task we may select another thread
and then continue or step.
/* Start remote-debugging of a machine over a serial link. */
void
-start_remote (void)
+start_remote (int from_tty)
{
init_thread_list ();
init_wait_for_inferior ();
is currently running and GDB state should be set to the same as
for an async run. */
wait_for_inferior ();
+
+ /* Now that the inferior has stopped, do any bookkeeping like
+ loading shared libraries. We want to do this before normal_stop,
+ so that the displayed frame is up to date. */
+ post_create_inferior (¤t_target, from_tty);
+
normal_stop ();
}
/* The first resume is not following a fork/vfork/exec. */
pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
- /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
- number_of_threads_in_syscalls = 0;
-
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
{
infwait_normal_state,
infwait_thread_hop_state,
- infwait_nullified_state,
infwait_nonstep_watch_state
};
to the interface from within handle_inferior_event(). */
enum inferior_stop_reason
{
- /* We don't know why. */
- STOP_UNKNOWN,
/* Step, next, nexti, stepi finished. */
END_STEPPING_RANGE,
- /* Found breakpoint. */
- BREAKPOINT_HIT,
/* Inferior terminated by signal. */
SIGNAL_EXITED,
/* Inferior exited. */
int step_after_step_resume_breakpoint;
int stepping_through_solib_after_catch;
bpstat stepping_through_solib_catchpoints;
- int enable_hw_watchpoints_after_wait;
int new_thread_event;
struct target_waitstatus tmpstatus;
enum infwait_states infwait_state;
static void step_into_function (struct execution_control_state *ecs);
static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
+static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
struct frame_id sr_id);
static void stop_stepping (struct execution_control_state *ecs);
struct execution_control_state ecss;
struct execution_control_state *ecs;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: wait_for_inferior\n");
+
old_cleanups = make_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
void
init_execution_control_state (struct execution_control_state *ecs)
{
- /* ecs->another_trap? */
+ ecs->another_trap = 0;
ecs->random_signal = 0;
ecs->step_after_step_resume_breakpoint = 0;
ecs->handling_longjmp = 0; /* FIXME */
ecs->stepping_through_solib_after_catch = 0;
ecs->stepping_through_solib_catchpoints = NULL;
- ecs->enable_hw_watchpoints_after_wait = 0;
ecs->sal = find_pc_line (prev_pc, 0);
ecs->current_line = ecs->sal.line;
ecs->current_symtab = ecs->sal.symtab;
*status = target_last_waitstatus;
}
+void
+nullify_last_target_wait_ptid (void)
+{
+ target_last_wait_ptid = minus_one_ptid;
+}
+
/* Switch thread contexts, maintaining "infrun state". */
static void
be lost. This may happen as a result of the target module
mishandling thread creation. */
+ if (debug_infrun)
+ {
+ fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ",
+ target_pid_to_str (inferior_ptid));
+ fprintf_unfiltered (gdb_stdlog, "to %s\n",
+ target_pid_to_str (ecs->ptid));
+ }
+
if (in_thread_list (inferior_ptid) && in_thread_list (ecs->ptid))
{ /* Perform infrun state context switch: */
/* Save infrun state for the old thread. */
&ecs->current_line, &ecs->current_symtab);
}
inferior_ptid = ecs->ptid;
+ reinit_frame_cache ();
}
static void
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
- if (DECR_PC_AFTER_BREAK == 0)
+ if (gdbarch_decr_pc_after_break (current_gdbarch) == 0)
return;
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
we aren't, just return.
We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
- affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
- by software breakpoints should be handled through the normal breakpoint
- layer.
+ affected by gdbarch_decr_pc_after_break. Other waitkinds which are
+ implemented by software breakpoints should be handled through the normal
+ breakpoint layer.
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
- DECR_PC_AFTER_BREAK. I don't know any specific target that generates
- these signals at breakpoints (the code has been in GDB since at least
- 1992) so I can not guess how to handle them here.
+ gdbarch_decr_pc_after_break. I don't know any specific target that
+ generates these signals at breakpoints (the code has been in GDB since at
+ least 1992) so I can not guess how to handle them here.
- In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
- would have the PC after hitting a watchpoint affected by
- DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
- in GDB history, and it seems unlikely to be correct, so
- HAVE_NONSTEPPABLE_WATCHPOINTS is not checked here. */
+ In earlier versions of GDB, a target with
+ gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a
+ watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any
+ target with both of these set in GDB history, and it seems unlikely to be
+ correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */
if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
return;
/* Find the location where (if we've hit a breakpoint) the
breakpoint would be. */
- breakpoint_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
+ breakpoint_pc = read_pc_pid (ecs->ptid) - gdbarch_decr_pc_after_break
+ (current_gdbarch);
if (SOFTWARE_SINGLE_STEP_P ())
{
/* When using hardware single-step, a SIGTRAP is reported for
both a completed single-step and a software breakpoint. Need
to differentiate between the two as the latter needs
- adjusting but the former does not. */
- if (currently_stepping (ecs))
+ adjusting but the former does not.
+
+ When the thread to be examined does not match the current thread
+ context we can't use currently_stepping, so assume no
+ single-stepping in this case. */
+ if (ptid_equal (ecs->ptid, inferior_ptid) && currently_stepping (ecs))
{
if (prev_pc == breakpoint_pc
&& software_breakpoint_inserted_here_p (breakpoint_pc))
void
handle_inferior_event (struct execution_control_state *ecs)
{
- /* NOTE: cagney/2003-03-28: If you're looking at this code and
- thinking that the variable stepped_after_stopped_by_watchpoint
- isn't used, then you're wrong! The macro STOPPED_BY_WATCHPOINT,
- defined in the file "config/pa/nm-hppah.h", accesses the variable
- indirectly. Mutter something rude about the HP merge. */
+ /* NOTE: bje/2005-05-02: If you're looking at this code and thinking
+ that the variable stepped_after_stopped_by_watchpoint isn't used,
+ then you're wrong! See remote.c:remote_stopped_data_address. */
+
int sw_single_step_trap_p = 0;
int stopped_by_watchpoint = -1; /* Mark as unknown. */
switch (ecs->infwait_state)
{
case infwait_thread_hop_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
/* Cancel the waiton_ptid. */
ecs->waiton_ptid = pid_to_ptid (-1);
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_normal_state:
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
- break;
-
- case infwait_nullified_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_nonstep_watch_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: infwait_nonstep_watch_state\n");
insert_breakpoints ();
/* FIXME-maybe: is this cleaner than setting a flag? Does it
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
ecs->infwait_state = infwait_normal_state;
- flush_cached_frames ();
+ reinit_frame_cache ();
/* If it's a new process, add it to the thread database */
switch (ecs->ws.kind)
{
case TARGET_WAITKIND_LOADED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
/* Ignore gracefully during startup of the inferior, as it
might be the shell which has just loaded some objects,
otherwise add the symbols for the newly loaded objects. */
return;
case TARGET_WAITKIND_SPURIOUS:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
target_terminal_ours (); /* Must do this before mourn anyway */
print_stop_reason (EXITED, ecs->ws.value.integer);
(LONGEST) ecs->ws.value.integer));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */
stop_print_frame = 0;
stop_stepping (ecs);
return;
case TARGET_WAITKIND_SIGNALLED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
stop_print_frame = 0;
stop_signal = ecs->ws.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
target_mourn_inferior ();
print_stop_reason (SIGNAL_EXITED, stop_signal);
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */
stop_stepping (ecs);
return;
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
stop_signal = TARGET_SIGNAL_TRAP;
pending_follow.kind = ecs->ws.kind;
pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ {
+ context_switch (ecs);
+ reinit_frame_cache ();
+ }
+
stop_pc = read_pc ();
stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
stop_signal = TARGET_SIGNAL_TRAP;
/* NOTE drow/2002-12-05: This code should be pushed down into the
if (inferior_ignoring_leading_exec_events)
{
inferior_ignoring_leading_exec_events--;
- if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
- ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.
- parent_pid);
target_resume (ecs->ptid, 0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
inferior_ptid = ecs->saved_inferior_ptid;
+ if (!ptid_equal (ecs->ptid, inferior_ptid))
+ {
+ context_switch (ecs);
+ reinit_frame_cache ();
+ }
+
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
}
goto process_event_stop_test;
- /* These syscall events are returned on HP-UX, as part of its
- implementation of page-protection-based "hardware" watchpoints.
- HP-UX has unfortunate interactions between page-protections and
- some system calls. Our solution is to disable hardware watches
- when a system call is entered, and reenable them when the syscall
- completes. The downside of this is that we may miss the precise
- point at which a watched piece of memory is modified. "Oh well."
-
- Note that we may have multiple threads running, which may each
- enter syscalls at roughly the same time. Since we don't have a
- good notion currently of whether a watched piece of memory is
- thread-private, we'd best not have any page-protections active
- when any thread is in a syscall. Thus, we only want to reenable
- hardware watches when no threads are in a syscall.
-
- Also, be careful not to try to gather much state about a thread
- that's in a syscall. It's frequently a losing proposition. */
+ /* Be careful not to try to gather much state about a thread
+ that's in a syscall. It's frequently a losing proposition. */
case TARGET_WAITKIND_SYSCALL_ENTRY:
- number_of_threads_in_syscalls++;
- if (number_of_threads_in_syscalls == 1)
- {
- TARGET_DISABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
get it entirely out of the syscall. (We get notice of the
event when the thread is just on the verge of exiting a
syscall. Stepping one instruction seems to get it back
- into user code.)
-
- Note that although the logical place to reenable h/w watches
- is here, we cannot. We cannot reenable them before stepping
- the thread (this causes the next wait on the thread to hang).
-
- Nor can we enable them after stepping until we've done a wait.
- Thus, we simply set the flag ecs->enable_hw_watchpoints_after_wait
- here, which will be serviced immediately after the target
- is waited on. */
+ into user code.) */
case TARGET_WAITKIND_SYSCALL_RETURN:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- if (number_of_threads_in_syscalls > 0)
- {
- number_of_threads_in_syscalls--;
- ecs->enable_hw_watchpoints_after_wait =
- (number_of_threads_in_syscalls == 0);
- }
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_STOPPED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
stop_signal = ecs->ws.value.sig;
break;
circumstance is any event which the lower level knows will be
reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n");
prepare_to_wait (ecs);
return;
}
stop_pc = read_pc_pid (ecs->ptid);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
+
if (stepping_past_singlestep_breakpoint)
{
gdb_assert (SOFTWARE_SINGLE_STEP_P ()
we could tell, but we can't reliably. */
if (stop_signal == TARGET_SIGNAL_TRAP)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
ecs->random_signal = 0;
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
+ /* We have not context switched yet, so this should be true
+ no matter which thread hit the singlestep breakpoint. */
+ gdb_assert (ptid_equal (inferior_ptid, singlestep_ptid));
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: software single step "
+ "trap for %s\n",
+ target_pid_to_str (ecs->ptid));
+
ecs->random_signal = 0;
/* The call to in_thread_list is necessary because PTIDs sometimes
change when we go from single-threaded to multi-threaded. If
if (!ptid_equal (singlestep_ptid, ecs->ptid)
&& in_thread_list (singlestep_ptid))
{
- thread_hop_needed = 1;
- stepping_past_singlestep_breakpoint = 1;
- saved_singlestep_ptid = singlestep_ptid;
+ /* If the PC of the thread we were trying to single-step
+ has changed, discard this event (which we were going
+ to ignore anyway), and pretend we saw that thread
+ trap. This prevents us continuously moving the
+ single-step breakpoint forward, one instruction at a
+ time. If the PC has changed, then the thread we were
+ trying to single-step has trapped or been signalled,
+ but the event has not been reported to GDB yet.
+
+ There might be some cases where this loses signal
+ information, if a signal has arrived at exactly the
+ same time that the PC changed, but this is the best
+ we can do with the information available. Perhaps we
+ should arrange to report all events for all threads
+ when they stop, or to re-poll the remote looking for
+ this particular thread (i.e. temporarily enable
+ schedlock). */
+ if (read_pc_pid (singlestep_ptid) != singlestep_pc)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
+ " but expected thread advanced also\n");
+
+ /* The current context still belongs to
+ singlestep_ptid. Don't swap here, since that's
+ the context we want to use. Just fudge our
+ state and continue. */
+ ecs->ptid = singlestep_ptid;
+ stop_pc = read_pc_pid (ecs->ptid);
+ }
+ else
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: unexpected thread\n");
+
+ thread_hop_needed = 1;
+ stepping_past_singlestep_breakpoint = 1;
+ saved_singlestep_ptid = singlestep_ptid;
+ }
}
}
{
int remove_status;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
+
/* Saw a breakpoint, but it was hit by the wrong thread.
Just continue. */
if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
so, then switch to that thread. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
+
context_switch (ecs);
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
-
- flush_cached_frames ();
}
if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
- /* If PC is pointing at a nullified instruction, then step beyond
- it so that the user won't be confused when GDB appears to be ready
- to execute it. */
-
- /* if (INSTRUCTION_NULLIFIED && currently_stepping (ecs)) */
- if (INSTRUCTION_NULLIFIED)
- {
- registers_changed ();
- target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- /* We may have received a signal that we want to pass to
- the inferior; therefore, we must not clobber the waitstatus
- in WS. */
-
- ecs->infwait_state = infwait_nullified_state;
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->tmpstatus);
- prepare_to_wait (ecs);
- return;
- }
-
/* It may not be necessary to disable the watchpoint to stop over
it. For example, the PA can (with some kernel cooperation)
single step over a watchpoint without disabling the watchpoint. */
if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
resume (1, 0);
prepare_to_wait (ecs);
return;
/* It is far more common to need to disable a watchpoint to step
the inferior over it. FIXME. What else might a debug
register or page protection watchpoint scheme need here? */
- if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
+ if (gdbarch_have_nonsteppable_watchpoint (current_gdbarch)
+ && STOPPED_BY_WATCHPOINT (ecs->ws))
{
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
includes evaluating watchpoints, things will come to a
stop in the correct manner. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
remove_breakpoints ();
registers_changed ();
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
- ecs->stop_func_start += DEPRECATED_FUNCTION_START_OFFSET;
+ ecs->stop_func_start
+ += gdbarch_deprecated_function_start_offset (current_gdbarch);
ecs->another_trap = 0;
bpstat_clear (&stop_bpstat);
stop_step = 0;
stop_print_frame = 1;
ecs->random_signal = 0;
stopped_by_random_signal = 0;
- breakpoints_failed = 0;
+
+ if (stop_signal == TARGET_SIGNAL_TRAP
+ && trap_expected
+ && gdbarch_single_step_through_delay_p (current_gdbarch)
+ && currently_stepping (ecs))
+ {
+ /* We're trying to step of a breakpoint. Turns out that we're
+ also on an instruction that needs to be stepped multiple
+ times before it's been fully executing. E.g., architectures
+ with a delay slot. It needs to be stepped twice, once for
+ the instruction and once for the delay slot. */
+ int step_through_delay
+ = gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ());
+ if (debug_infrun && step_through_delay)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
+ if (step_range_end == 0 && step_through_delay)
+ {
+ /* The user issued a continue when stopped at a breakpoint.
+ Set up for another trap and get out of here. */
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
+ else if (step_through_delay)
+ {
+ /* The user issued a step when stopped at a breakpoint.
+ Maybe we should stop, maybe we should not - the delay
+ slot *might* correspond to a line of source. In any
+ case, don't decide that here, just set ecs->another_trap,
+ making sure we single-step again before breakpoints are
+ re-inserted. */
+ ecs->another_trap = 1;
+ }
+ }
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
{
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
stop_print_frame = 0;
stop_stepping (ecs);
return;
shared libraries hook functions. */
if (stop_soon == STOP_QUIETLY)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_stepping (ecs);
return;
}
/* Don't even think about breakpoints if just proceeded over a
breakpoint. */
if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
- bpstat_clear (&stop_bpstat);
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: trap expected\n");
+ bpstat_clear (&stop_bpstat);
+ }
else
{
/* See if there is a breakpoint at the current PC. */
/* Signal not for debugging purposes. */
int printed = 0;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal);
+
stopped_by_random_signal = 1;
if (signal_print[stop_signal])
code paths as single-step - set a breakpoint at the
signal return address and then, once hit, step off that
breakpoint. */
+
insert_step_resume_breakpoint_at_frame (get_current_frame ());
ecs->step_after_step_resume_breakpoint = 1;
+ keep_going (ecs);
+ return;
}
- else if (step_range_end != 0
- && stop_signal != TARGET_SIGNAL_0
- && stop_pc >= step_range_start && stop_pc < step_range_end
- && frame_id_eq (get_frame_id (get_current_frame ()),
- step_frame_id))
+
+ if (step_range_end != 0
+ && stop_signal != TARGET_SIGNAL_0
+ && stop_pc >= step_range_start && stop_pc < step_range_end
+ && frame_id_eq (get_frame_id (get_current_frame ()),
+ step_frame_id)
+ && step_resume_breakpoint == NULL)
{
/* The inferior is about to take a signal that will take it
out of the single step range. Set a breakpoint at the
while in the single-step range. Nested signals aren't a
problem as they eventually all return. */
insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ keep_going (ecs);
+ return;
}
+
+ /* Note: step_resume_breakpoint may be non-NULL. This occures
+ when either there's a nested signal, or when there's a
+ pending signal enabled just as the signal handler returns
+ (leaving the inferior at the step-resume-breakpoint without
+ actually executing it). Either way continue until the
+ breakpoint is really hit. */
keep_going (ecs);
return;
}
/* If we hit the breakpoint at longjmp, disable it for the
duration of this command. Then, install a temporary
breakpoint at the target of the jmp_buf. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
disable_longjmp_breakpoint ();
remove_breakpoints ();
breakpoints_inserted = 0;
- if (!GET_LONGJMP_TARGET_P () || !GET_LONGJMP_TARGET (&jmp_buf_pc))
+ if (!gdbarch_get_longjmp_target_p (current_gdbarch)
+ || !gdbarch_get_longjmp_target (current_gdbarch,
+ get_current_frame (), &jmp_buf_pc))
{
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
remove_breakpoints ();
breakpoints_inserted = 0;
disable_longjmp_breakpoint ();
/* else fallthrough */
case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
if (breakpoints_inserted)
- {
- remove_breakpoints ();
- }
+ remove_breakpoints ();
breakpoints_inserted = 0;
ecs->another_trap = 1;
/* Still need to check other stuff, at least the case
break;
case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
stop_print_frame = 1;
/* We are about to nuke the step_resume_breakpointt via the
return;
case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
stop_print_frame = 0;
/* We are about to nuke the step_resume_breakpoin via the
step-resume bp, but it makes no effort to ensure that
the one deleted is the one currently stopped at. MVS */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
+
if (step_resume_breakpoint == NULL)
{
step_resume_breakpoint =
}
break;
- case BPSTAT_WHAT_THROUGH_SIGTRAMP:
- /* If were waiting for a trap, hitting the step_resume_break
- doesn't count as getting it. */
- if (trap_expected)
- ecs->another_trap = 1;
- break;
-
case BPSTAT_WHAT_CHECK_SHLIBS:
case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
-#ifdef SOLIB_ADD
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
/* Remove breakpoints, we eventually want to step over the
shlib event breakpoint, and SOLIB_ADD might adjust
breakpoint addresses via breakpoint_re_set. */
exec/process stratum, instead relying on the target stack
to propagate relevant changes (stop, section table
changed, ...) up to other layers. */
+#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
+#else
+ solib_add (NULL, 0, ¤t_target, auto_solib_add);
+#endif
target_terminal_inferior ();
/* Try to reenable shared library breakpoints, additional
break;
}
}
-#endif
break;
case BPSTAT_WHAT_LAST:
test for stepping. But, if not stepping,
do not stop. */
- /* Are we stepping to get the inferior out of the dynamic
- linker's hook (and possibly the dld itself) after catching
- a shlib event? */
+ /* Are we stepping to get the inferior out of the dynamic linker's
+ hook (and possibly the dld itself) after catching a shlib
+ event? */
if (ecs->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
/* Have we reached our destination? If not, keep going. */
if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
ecs->another_trap = 1;
keep_going (ecs);
return;
}
#endif
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
caused us to begin stepping. */
ecs->stepping_through_solib_after_catch = 0;
if (step_resume_breakpoint)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: step-resume breakpoint is inserted\n");
+
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
if (step_range_end == 0)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
/* Likewise if we aren't even stepping. */
keep_going (ecs);
return;
within it! */
if (stop_pc >= step_range_start && stop_pc < step_range_end)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
+ paddr_nz (step_range_start),
+ paddr_nz (step_range_end));
keep_going (ecs);
return;
}
until we exit the run time loader code and reach the callee's
address. */
if (step_over_calls == STEP_OVER_UNDEBUGGABLE
- && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc))
+#ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
+ && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)
+#else
+ && in_solib_dynsym_resolve_code (stop_pc)
+#endif
+ )
{
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
+
if (pc_after_resolver)
{
/* Set up a step-resume breakpoint at the address
|| step_over_calls == STEP_OVER_ALL)
&& get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
/* The inferior, while doing a "step" or "next", has ended up in
a signal trampoline (either by a signal being delivered or by
the signal handler returning). Just single-step until the
return;
}
- if (frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
+ /* Check for subroutine calls. The check for the current frame
+ equalling the step ID is not necessary - the check of the
+ previous frame's ID is sufficient - but it is a common case and
+ cheaper than checking the previous frame's ID.
+
+ NOTE: frame_id_eq will never report two invalid frame IDs as
+ being equal, so to get into this block, both the current and
+ previous frame must have valid frame IDs. */
+ if (!frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id)
+ && frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
{
- /* It's a subroutine call. */
CORE_ADDR real_stop_pc;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
+
if ((step_over_calls == STEP_OVER_NONE)
|| ((step_range_end == 1)
&& in_prologue (prev_pc, ecs->stop_func_start)))
/* We're doing a "next", set a breakpoint at callee's return
address (the address at which the caller will
resume). */
- insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
+ insert_step_resume_breakpoint_at_caller (get_current_frame ());
keep_going (ecs);
return;
}
function. That's what tells us (a) whether we want to step
into it at all, and (b) what prologue we want to run to the
end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (stop_pc);
+ real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc);
if (real_stop_pc == 0)
- real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
- if (IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start))
+ if (
+#ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
+ IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start)
+#else
+ in_solib_dynsym_resolve_code (ecs->stop_func_start)
+#endif
+)
{
struct symtab_and_line sr_sal;
init_sal (&sr_sal);
/* Set a breakpoint at callee's return address (the address at
which the caller will resume). */
- insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
+ insert_step_resume_breakpoint_at_caller (get_current_frame ());
keep_going (ecs);
return;
}
/* If we're in the return path from a shared library trampoline,
we want to proceed through the trampoline when stepping. */
- if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
+ if (gdbarch_in_solib_return_trampoline (current_gdbarch,
+ stop_pc, ecs->stop_func_name))
{
/* Determine where this trampoline returns. */
- CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ CORE_ADDR real_stop_pc;
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
/* Only proceed through if we know where it's going. */
if (real_stop_pc)
}
}
+ ecs->sal = find_pc_line (stop_pc, 0);
+
/* NOTE: tausq/2004-05-24: This if block used to be done before all
the trampoline processing logic, however, there are some trampolines
that have no names, so we should do trampoline handling first. */
if (step_over_calls == STEP_OVER_UNDEBUGGABLE
- && ecs->stop_func_name == NULL)
+ && ecs->stop_func_name == NULL
+ && ecs->sal.line == 0)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
+
/* The inferior just stepped into, or returned to, an
- undebuggable function (where there is no symbol, not even a
- minimal symbol, corresponding to the address where the
+ undebuggable function (where there is no debugging information
+ and no line number corresponding to the address where the
inferior stopped). Since we want to skip this kind of code,
we keep going until the inferior returns from this
- function. */
- if (step_stop_if_no_debug)
+ function - unless the user has asked us not to (via
+ set step-mode) or we no longer know how to get back
+ to the call site. */
+ if (step_stop_if_no_debug
+ || !frame_id_p (frame_unwind_id (get_current_frame ())))
{
/* If we have no line number and the step-stop-if-no-debug
is set, we stop the step so that the user has a chance to
{
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
- insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
+ insert_step_resume_breakpoint_at_caller (get_current_frame ());
keep_going (ecs);
return;
}
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
- ecs->sal = find_pc_line (stop_pc, 0);
-
if (ecs->sal.line == 0)
{
/* We have no line number information. That means to stop
stepping (does this always happen right after one instruction,
when we do "s" in a function with no line numbers,
or can this happen as a result of a return or longjmp?). */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
we don't stop if we step into the middle of a different line.
That is said to make things like for (;;) statements work
better. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
This is particularly necessary for a one-line function,
in which after skipping the prologue we better stop even though
we will be in mid-line. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different function\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
step_frame_id = current_frame;
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
keep_going (ecs);
}
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
- ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start);
+ ecs->stop_func_start = gdbarch_skip_prologue
+ (current_gdbarch, ecs->stop_func_start);
ecs->sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
keep_going (ecs);
}
-/* Insert a "step resume breakpoint" at SR_SAL with frame ID SR_ID.
+/* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID.
This is used to both functions and to skip over code. */
static void
thread, so we should never be setting a new
step_resume_breakpoint when one is already active. */
gdb_assert (step_resume_breakpoint == NULL);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: inserting step-resume breakpoint at 0x%s\n",
+ paddr_nz (sr_sal.pc));
+
step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
bp_step_resume);
if (breakpoints_inserted)
insert_breakpoints ();
}
-
-/* Insert a "step resume breakpoint" at RETURN_FRAME.pc. This is used
- to skip a function (next, skip-no-debug) or signal. It's assumed
- that the function/signal handler being skipped eventually returns
- to the breakpoint inserted at RETURN_FRAME.pc.
- For the skip-function case, the function may have been reached by
- either single stepping a call / return / signal-return instruction,
- or by hitting a breakpoint. In all cases, the RETURN_FRAME belongs
- to the skip-function's caller.
+/* Insert a "step-resume breakpoint" at RETURN_FRAME.pc. This is used
+ to skip a potential signal handler.
- For the signals case, this is called with the interrupted
- function's frame. The signal handler, when it returns, will resume
- the interrupted function at RETURN_FRAME.pc. */
+ This is called with the interrupted function's frame. The signal
+ handler, when it returns, will resume the interrupted function at
+ RETURN_FRAME.pc. */
static void
insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (return_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
}
+/* Similar to insert_step_resume_breakpoint_at_frame, except
+ but a breakpoint at the previous frame's PC. This is used to
+ skip a function after stepping into it (for "next" or if the called
+ function has no debugging information).
+
+ The current function has almost always been reached by single
+ stepping a call or return instruction. NEXT_FRAME belongs to the
+ current function, and the breakpoint will be set at the caller's
+ resume address.
+
+ This is a separate function rather than reusing
+ insert_step_resume_breakpoint_at_frame in order to avoid
+ get_prev_frame, which may stop prematurely (see the implementation
+ of frame_unwind_id for an example). */
+
+static void
+insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
+{
+ struct symtab_and_line sr_sal;
+
+ /* We shouldn't have gotten here if we don't know where the call site
+ is. */
+ gdb_assert (frame_id_p (frame_unwind_id (next_frame)));
+
+ init_sal (&sr_sal); /* initialize to zeros */
+
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, frame_pc_unwind (next_frame));
+ sr_sal.section = find_pc_overlay (sr_sal.pc);
+
+ insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
+}
+
static void
stop_stepping (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
+
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
if (!breakpoints_inserted && !ecs->another_trap)
{
- breakpoints_failed = insert_breakpoints ();
- if (breakpoints_failed)
+ /* Stop stepping when inserting breakpoints
+ has failed. */
+ if (insert_breakpoints () != 0)
{
stop_stepping (ecs);
return;
static void
prepare_to_wait (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
if (ecs->infwait_state == infwait_normal_state)
{
overlay_cache_invalid = 1;
{
switch (stop_reason)
{
- case STOP_UNKNOWN:
- /* We don't deal with these cases from handle_inferior_event()
- yet. */
- break;
case END_STEPPING_RANGE:
/* We are done with a step/next/si/ni command. */
/* For now print nothing. */
operation for n > 1 */
if (!step_multi || !stop_step)
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "end-stepping-range");
- break;
- case BREAKPOINT_HIT:
- /* We found a breakpoint. */
- /* For now print nothing. */
+ ui_out_field_string
+ (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
break;
case SIGNAL_EXITED:
/* The inferior was terminated by a signal. */
annotate_signalled ();
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "exited-signalled");
+ ui_out_field_string
+ (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
ui_out_text (uiout, "\nProgram terminated with signal ");
annotate_signal_name ();
ui_out_field_string (uiout, "signal-name",
if (stop_info)
{
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "exited");
+ ui_out_field_string (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_EXITED));
ui_out_text (uiout, "\nProgram exited with code ");
ui_out_field_fmt (uiout, "exit-code", "0%o",
(unsigned int) stop_info);
else
{
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "exited-normally");
+ ui_out_field_string
+ (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
ui_out_text (uiout, "\nProgram exited normally.\n");
}
+ /* Support the --return-child-result option. */
+ return_child_result_value = stop_info;
break;
case SIGNAL_RECEIVED:
/* Signal received. The signal table tells us to print about
ui_out_text (uiout, "\nProgram received signal ");
annotate_signal_name ();
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_string (uiout, "reason", "signal-received");
+ ui_out_field_string
+ (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
ui_out_field_string (uiout, "signal-name",
target_signal_to_name (stop_info));
annotate_signal_name_end ();
break;
default:
internal_error (__FILE__, __LINE__,
- "print_stop_reason: unrecognized enum value");
+ _("print_stop_reason: unrecognized enum value"));
break;
}
}
&& last.kind != TARGET_WAITKIND_EXITED)
{
target_terminal_ours_for_output ();
- printf_filtered ("[Switching to %s]\n",
+ printf_filtered (_("[Switching to %s]\n"),
target_pid_or_tid_to_str (inferior_ptid));
previous_inferior_ptid = inferior_ptid;
}
/* NOTE drow/2004-01-17: Is this still necessary? */
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
- DECR_PC_AFTER_BREAK */
+ gdbarch_decr_pc_after_break */
if (target_has_execution)
/* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
- DECR_PC_AFTER_BREAK, the program counter can change. Ask the
+ gdbarch_decr_pc_after_break, the program counter can change. Ask the
frame code to check for this and sort out any resultant mess.
- DECR_PC_AFTER_BREAK needs to just go away. */
+ gdbarch_decr_pc_after_break needs to just go away. */
deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
if (target_has_execution && breakpoints_inserted)
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf_filtered ("Cannot remove breakpoints because ");
- printf_filtered ("program is no longer writable.\n");
- printf_filtered ("It might be running in another process.\n");
- printf_filtered ("Further execution is probably impossible.\n");
+ printf_filtered (_("\
+Cannot remove breakpoints because program is no longer writable.\n\
+It might be running in another process.\n\
+Further execution is probably impossible.\n"));
}
}
breakpoints_inserted = 0;
target_terminal_ours ();
+ /* Set the current source location. This will also happen if we
+ display the frame below, but the current SAL will be incorrect
+ during a user hook-stop function. */
+ if (target_has_stack && !stop_stack_dummy)
+ set_current_sal_from_frame (get_current_frame (), 1);
+
/* Look up the hook_stop and run it (CLI internally handles problem
of stop_command's pre-hook not existing). */
if (stop_command)
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
- if (stop_print_frame && deprecated_selected_frame)
+ if (stop_print_frame)
{
int bpstat_ret;
int source_flag;
do_frame_printing = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "Unknown value.");
+ internal_error (__FILE__, __LINE__, _("Unknown value."));
}
- /* For mi, have the same behavior every time we stop:
- print everything but the source line. */
- if (ui_out_is_mi_like_p (uiout))
- source_flag = LOC_AND_ADDRESS;
if (ui_out_is_mi_like_p (uiout))
ui_out_field_int (uiout, "thread-id",
if (proceed_to_finish)
/* NB: The copy goes through to the target picking up the value of
all the registers. */
- regcache_cpy (stop_registers, current_regcache);
+ regcache_cpy (stop_registers, get_current_regcache ());
if (stop_stack_dummy)
{
static void
sig_print_header (void)
{
- printf_filtered ("\
-Signal Stop\tPrint\tPass to program\tDescription\n");
+ printf_filtered (_("\
+Signal Stop\tPrint\tPass to program\tDescription\n"));
}
static void
if (args == NULL)
{
- error_no_arg ("signal to handle");
+ error_no_arg (_("signal to handle"));
}
/* Allocate and zero an array of flags for which signals to handle. */
else
{
/* Not a number and not a recognized flag word => complain. */
- error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv);
}
}
}
else
{
- printf_unfiltered ("Not confirmed, unchanged.\n");
+ printf_unfiltered (_("Not confirmed, unchanged.\n"));
gdb_flush (gdb_stdout);
}
}
if (validFlag)
handle_command (argBuf, from_tty);
else
- printf_filtered ("Invalid signal handling flag.\n");
+ printf_filtered (_("Invalid signal handling flag.\n"));
if (argBuf)
xfree (argBuf);
}
sig_print_info (oursig);
}
- printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
+ printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
}
\f
struct inferior_status
inf_status->stop_registers = regcache_dup_no_passthrough (stop_registers);
- inf_status->registers = regcache_dup (current_regcache);
+ inf_status->registers = regcache_dup (get_current_regcache ());
- inf_status->selected_frame_id = get_frame_id (deprecated_selected_frame);
+ inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
return inf_status;
}
selected frame. */
if (frame == NULL)
{
- warning ("Unable to restore previously selected frame.\n");
+ warning (_("Unable to restore previously selected frame."));
return 0;
}
(and perhaps other times). */
if (target_has_execution)
/* NB: The register write goes through to the target. */
- regcache_cpy (current_regcache, inf_status->registers);
+ regcache_cpy (get_current_regcache (), inf_status->registers);
regcache_xfree (inf_status->registers);
/* FIXME: If we are being called after stopping in a function which
DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
- add_info ("signals", signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
+ add_info ("signals", signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
- add_com ("handle", class_run, handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("handle", class_run, handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
if (xdb_commands)
{
- add_com ("lz", class_info, signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
- add_com ("z", class_run, xdb_handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("lz", class_info, signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
+ add_com ("z", class_run, xdb_handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"s\" (toggles between stop and nostop), \n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"s\" (toggles between stop and nostop), \n\
\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
}
if (!dbx_commands)
- stop_command =
- add_cmd ("stop", class_obscure, not_just_help_class_command, "There is no `stop' command, but you can set a hook on `stop'.\n\
+ stop_command = add_cmd ("stop", class_obscure,
+ not_just_help_class_command, _("\
+There is no `stop' command, but you can set a hook on `stop'.\n\
This allows you to set a list of commands to be run each time execution\n\
-of the program stops.", &cmdlist);
+of the program stops."), &cmdlist);
+
+ add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
+Set inferior debugging."), _("\
+Show inferior debugging."), _("\
+When non-zero, inferior specific debugging is enabled."),
+ NULL,
+ show_debug_infrun,
+ &setdebuglist, &showdebuglist);
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_stop[TARGET_SIGNAL_CANCEL] = 0;
signal_print[TARGET_SIGNAL_CANCEL] = 0;
-#ifdef SOLIB_ADD
- deprecated_add_show_from_set
- (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
- (char *) &stop_on_solib_events,
- "Set stopping for shared library events.\n\
+ add_setshow_zinteger_cmd ("stop-on-solib-events", class_support,
+ &stop_on_solib_events, _("\
+Set stopping for shared library events."), _("\
+Show stopping for shared library events."), _("\
If nonzero, gdb will give control to the user when the dynamic linker\n\
notifies gdb of shared library events. The most common event of interest\n\
-to the user would be loading/unloading of a new library.\n", &setlist), &showlist);
-#endif
-
- c = add_set_enum_cmd ("follow-fork-mode",
- class_run,
- follow_fork_mode_kind_names, &follow_fork_mode_string,
- "Set debugger response to a program call of fork \
-or vfork.\n\
+to the user would be loading/unloading of a new library."),
+ NULL,
+ show_stop_on_solib_events,
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("follow-fork-mode", class_run,
+ follow_fork_mode_kind_names,
+ &follow_fork_mode_string, _("\
+Set debugger response to a program call of fork or vfork."), _("\
+Show debugger response to a program call of fork or vfork."), _("\
A fork or vfork creates a new process. follow-fork-mode can be:\n\
parent - the original process is debugged after a fork\n\
child - the new process is debugged after a fork\n\
The unfollowed process will continue to run.\n\
-By default, the debugger will follow the parent process.", &setlist);
- deprecated_add_show_from_set (c, &showlist);
-
- c = add_set_enum_cmd ("scheduler-locking", class_run, scheduler_enums, /* array of string names */
- &scheduler_mode, /* current mode */
- "Set mode for locking scheduler during execution.\n\
+By default, the debugger will follow the parent process."),
+ NULL,
+ show_follow_fork_mode_string,
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("scheduler-locking", class_run,
+ scheduler_enums, &scheduler_mode, _("\
+Set mode for locking scheduler during execution."), _("\
+Show mode for locking scheduler during execution."), _("\
off == no locking (threads may preempt at any time)\n\
on == full locking (no thread except the current thread may run)\n\
step == scheduler locked during every single-step operation.\n\
In this mode, no other thread may run during a step command.\n\
- Other threads may run while stepping over a function call ('next').", &setlist);
-
- set_cmd_sfunc (c, set_schedlock_func); /* traps on target vector */
- deprecated_add_show_from_set (c, &showlist);
-
- c = add_set_cmd ("step-mode", class_run,
- var_boolean, (char *) &step_stop_if_no_debug,
- "Set mode of the step operation. When set, doing a step over a\n\
-function without debug line information will stop at the first\n\
-instruction of that function. Otherwise, the function is skipped and\n\
-the step command stops at a different source line.", &setlist);
- deprecated_add_show_from_set (c, &showlist);
+ Other threads may run while stepping over a function call ('next')."),
+ set_schedlock_func, /* traps on target vector */
+ show_scheduler_mode,
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
+Set mode of the step operation."), _("\
+Show mode of the step operation."), _("\
+When set, doing a step over a function without debug line information\n\
+will stop at the first instruction of that function. Otherwise, the\n\
+function is skipped and the step command stops at a different source line."),
+ NULL,
+ show_step_stop_if_no_debug,
+ &setlist, &showlist);
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);