process.
Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
- Free Software Foundation, Inc.
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+ 2008 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdb_string.h"
#include "gdb_assert.h"
#include "mi/mi-common.h"
+#include "event-top.h"
/* Prototypes for local functions */
static void set_schedlock_func (char *args, int from_tty,
struct cmd_list_element *c);
-struct execution_control_state;
-
-static int currently_stepping (struct execution_control_state *ecs);
+static int currently_stepping (struct thread_info *tp);
static void xdb_handle_command (char *args, int from_tty);
-static int prepare_to_proceed (void);
+static int prepare_to_proceed (int);
void _initialize_infrun (void);
-int inferior_ignoring_startup_exec_events = 0;
-int inferior_ignoring_leading_exec_events = 0;
-
/* When set, stop the 'step' command if we enter a function which has
no line number information. The normal behavior is that we step
over such function. */
static ptid_t previous_inferior_ptid;
-/* This is true for configurations that may follow through execl() and
- similar functions. At present this is only true for HP-UX native. */
-
-#ifndef MAY_FOLLOW_EXEC
-#define MAY_FOLLOW_EXEC (0)
-#endif
-
-static int may_follow_exec = MAY_FOLLOW_EXEC;
+int debug_displaced = 0;
+static void
+show_debug_displaced (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value);
+}
static int debug_infrun = 0;
static void
past the dynamic linker, as if we were using "next" to step over a
function call.
- IN_SOLIB_DYNSYM_RESOLVE_CODE says whether we're in the dynamic
+ in_solib_dynsym_resolve_code() says whether we're in the dynamic
linker code or not. Normally, this means we single-step. However,
if SKIP_SOLIB_RESOLVER then returns non-zero, then its value is an
address where we can place a step-resume breakpoint to get past the
linker's symbol resolution function.
- IN_SOLIB_DYNSYM_RESOLVE_CODE can generally be implemented in a
+ in_solib_dynsym_resolve_code() can generally be implemented in a
pretty portable way, by comparing the PC against the address ranges
of the dynamic linker's sections.
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
-/* We can't step off a permanent breakpoint in the ordinary way, because we
- can't remove it. Instead, we have to advance the PC to the next
- instruction. This macro should expand to a pointer to a function that
- does that, or zero if we have no such function. If we don't have a
- definition for it, we have to report an error. */
-#ifndef SKIP_PERMANENT_BREAKPOINT
-#define SKIP_PERMANENT_BREAKPOINT (default_skip_permanent_breakpoint)
-static void
-default_skip_permanent_breakpoint (void)
-{
- error (_("\
-The program is stopped at a permanent breakpoint, but GDB does not know\n\
-how to step past a permanent breakpoint on this architecture. Try using\n\
-a command like `return' or `jump' to continue execution."));
-}
-#endif
-
/* Convert the #defines into values. This is temporary until wfi control
flow is completely sorted out. */
static struct cmd_list_element *stop_command;
-/* Nonzero if breakpoints are now inserted in the inferior. */
-
-static int breakpoints_inserted;
-
/* Function inferior was in as of last step command. */
static struct symbol *step_start_function;
-/* Nonzero if we are expecting a trace trap and should proceed from it. */
-
-static int trap_expected;
-
/* Nonzero if we want to give control to the user when we're notified
of shared library events by the dynamic linker. */
static int stop_on_solib_events;
enum stop_kind stop_soon;
-/* Nonzero if proceed is being used for a "finish" command or a similar
- situation when stop_registers should be saved. */
-
-int proceed_to_finish;
-
/* Save register contents here when about to pop a stack dummy frame,
if-and-only-if proceed_to_finish is set.
Thus this contains the return value from the called function (assuming
static int stop_print_frame;
-static struct breakpoint *step_resume_breakpoint = NULL;
-
/* This is a cached copy of the pid/waitstatus of the last event
returned by target_wait()/deprecated_target_wait_hook(). This
information is returned by get_last_target_status(). */
static ptid_t target_last_wait_ptid;
static struct target_waitstatus target_last_waitstatus;
+static void context_switch (ptid_t ptid);
+
+void init_thread_stepping_state (struct thread_info *tss);
+
+void init_infwait_state (void);
+
/* This is used to remember when a fork, vfork or exec event
was caught by a catchpoint, and thus the event is to be
followed at the next resume of the inferior, and not
enum target_waitkind kind;
struct
{
- int parent_pid;
- int child_pid;
+ ptid_t parent_pid;
+ ptid_t child_pid;
}
fork_event;
char *execd_pathname;
void
follow_inferior_reset_breakpoints (void)
{
+ struct thread_info *tp = inferior_thread ();
+
/* Was there a step_resume breakpoint? (There was if the user
did a "next" at the fork() call.) If so, explicitly reset its
thread number.
"threads". We must update the bp's notion of which thread
it is for, or it'll be ignored when it triggers. */
- if (step_resume_breakpoint)
- breakpoint_re_set_thread (step_resume_breakpoint);
+ if (tp->step_resume_breakpoint)
+ breakpoint_re_set_thread (tp->step_resume_breakpoint);
/* Reinsert all breakpoints in the child. The user may have set
breakpoints after catching the fork, in which case those
/* EXECD_PATHNAME is assumed to be non-NULL. */
static void
-follow_exec (int pid, char *execd_pathname)
+follow_exec (ptid_t pid, char *execd_pathname)
{
- int saved_pid = pid;
+ ptid_t saved_pid = pid;
struct target_ops *tgt;
-
- if (!may_follow_exec)
- return;
+ struct thread_info *th = inferior_thread ();
/* This is an exec event that we actually wish to pay attention to.
Refresh our symbol table to the newly exec'd program, remove any
/* If there was one, it's gone now. We cannot truly step-to-next
statement through an exec(). */
- step_resume_breakpoint = NULL;
- step_range_start = 0;
- step_range_end = 0;
+ th->step_resume_breakpoint = NULL;
+ th->step_range_start = 0;
+ th->step_range_end = 0;
/* What is this a.out's name? */
printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
- /* First collect the run target in effect. */
- tgt = find_run_target ();
- /* If we can't find one, things are in a very strange state... */
- if (tgt == NULL)
- error (_("Could find run target to save before following exec"));
-
gdb_flush (gdb_stdout);
- target_mourn_inferior ();
- inferior_ptid = pid_to_ptid (saved_pid);
+ generic_mourn_inferior ();
/* Because mourn_inferior resets inferior_ptid. */
- push_target (tgt);
+ inferior_ptid = saved_pid;
+
+ if (gdb_sysroot && *gdb_sysroot)
+ {
+ char *name = alloca (strlen (gdb_sysroot)
+ + strlen (execd_pathname)
+ + 1);
+ strcpy (name, gdb_sysroot);
+ strcat (name, execd_pathname);
+ execd_pathname = name;
+ }
/* That a.out is now the one to use. */
exec_file_attach (execd_pathname, 0);
- /* And also is where symbols can be found. */
+ /* Reset the shared library package. This ensures that we get a
+ shlib event when the child reaches "_start", at which point the
+ dld will have had a chance to initialize the child. */
+ /* Also, loading a symbol file below may trigger symbol lookups, and
+ we don't want those to be satisfied by the libraries of the
+ previous incarnation of this process. */
+ no_shared_libraries (NULL, 0);
+
+ /* Load the main file's symbols. */
symbol_file_add_main (execd_pathname, 0);
- /* Reset the shared library package. This ensures that we get
- a shlib event when the child reaches "_start", at which point
- the dld will have had a chance to initialize the child. */
-#if defined(SOLIB_RESTART)
- SOLIB_RESTART ();
-#endif
#ifdef SOLIB_CREATE_INFERIOR_HOOK
SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
#else
thread here so that we can resume single-stepping it later. */
static ptid_t saved_singlestep_ptid;
static int stepping_past_singlestep_breakpoint;
+
+/* If not equal to null_ptid, this means that after stepping over breakpoint
+ is finished, we need to switch to deferred_step_ptid, and step it.
+
+ The use case is when one thread has hit a breakpoint, and then the user
+ has switched to another thread and issued 'step'. We need to step over
+ breakpoint in the thread which hit the breakpoint, but then continue
+ stepping the thread user has selected. */
+static ptid_t deferred_step_ptid;
+\f
+/* Displaced stepping. */
+
+/* In non-stop debugging mode, we must take special care to manage
+ breakpoints properly; in particular, the traditional strategy for
+ stepping a thread past a breakpoint it has hit is unsuitable.
+ 'Displaced stepping' is a tactic for stepping one thread past a
+ breakpoint it has hit while ensuring that other threads running
+ concurrently will hit the breakpoint as they should.
+
+ The traditional way to step a thread T off a breakpoint in a
+ multi-threaded program in all-stop mode is as follows:
+
+ a0) Initially, all threads are stopped, and breakpoints are not
+ inserted.
+ a1) We single-step T, leaving breakpoints uninserted.
+ a2) We insert breakpoints, and resume all threads.
+
+ In non-stop debugging, however, this strategy is unsuitable: we
+ don't want to have to stop all threads in the system in order to
+ continue or step T past a breakpoint. Instead, we use displaced
+ stepping:
+
+ n0) Initially, T is stopped, other threads are running, and
+ breakpoints are inserted.
+ n1) We copy the instruction "under" the breakpoint to a separate
+ location, outside the main code stream, making any adjustments
+ to the instruction, register, and memory state as directed by
+ T's architecture.
+ n2) We single-step T over the instruction at its new location.
+ n3) We adjust the resulting register and memory state as directed
+ by T's architecture. This includes resetting T's PC to point
+ back into the main instruction stream.
+ n4) We resume T.
+
+ This approach depends on the following gdbarch methods:
+
+ - gdbarch_max_insn_length and gdbarch_displaced_step_location
+ indicate where to copy the instruction, and how much space must
+ be reserved there. We use these in step n1.
+
+ - gdbarch_displaced_step_copy_insn copies a instruction to a new
+ address, and makes any necessary adjustments to the instruction,
+ register contents, and memory. We use this in step n1.
+
+ - gdbarch_displaced_step_fixup adjusts registers and memory after
+ we have successfuly single-stepped the instruction, to yield the
+ same effect the instruction would have had if we had executed it
+ at its original address. We use this in step n3.
+
+ - gdbarch_displaced_step_free_closure provides cleanup.
+
+ The gdbarch_displaced_step_copy_insn and
+ gdbarch_displaced_step_fixup functions must be written so that
+ copying an instruction with gdbarch_displaced_step_copy_insn,
+ single-stepping across the copied instruction, and then applying
+ gdbarch_displaced_insn_fixup should have the same effects on the
+ thread's memory and registers as stepping the instruction in place
+ would have. Exactly which responsibilities fall to the copy and
+ which fall to the fixup is up to the author of those functions.
+
+ See the comments in gdbarch.sh for details.
+
+ Note that displaced stepping and software single-step cannot
+ currently be used in combination, although with some care I think
+ they could be made to. Software single-step works by placing
+ breakpoints on all possible subsequent instructions; if the
+ displaced instruction is a PC-relative jump, those breakpoints
+ could fall in very strange places --- on pages that aren't
+ executable, or at addresses that are not proper instruction
+ boundaries. (We do generally let other threads run while we wait
+ to hit the software single-step breakpoint, and they might
+ encounter such a corrupted instruction.) One way to work around
+ this would be to have gdbarch_displaced_step_copy_insn fully
+ simulate the effect of PC-relative instructions (and return NULL)
+ on architectures that use software single-stepping.
+
+ In non-stop mode, we can have independent and simultaneous step
+ requests, so more than one thread may need to simultaneously step
+ over a breakpoint. The current implementation assumes there is
+ only one scratch space per process. In this case, we have to
+ serialize access to the scratch space. If thread A wants to step
+ over a breakpoint, but we are currently waiting for some other
+ thread to complete a displaced step, we leave thread A stopped and
+ place it in the displaced_step_request_queue. Whenever a displaced
+ step finishes, we pick the next thread in the queue and start a new
+ displaced step operation on it. See displaced_step_prepare and
+ displaced_step_fixup for details. */
+
+/* If this is not null_ptid, this is the thread carrying out a
+ displaced single-step. This thread's state will require fixing up
+ once it has completed its step. */
+static ptid_t displaced_step_ptid;
+
+struct displaced_step_request
+{
+ ptid_t ptid;
+ struct displaced_step_request *next;
+};
+
+/* A queue of pending displaced stepping requests. */
+struct displaced_step_request *displaced_step_request_queue;
+
+/* The architecture the thread had when we stepped it. */
+static struct gdbarch *displaced_step_gdbarch;
+
+/* The closure provided gdbarch_displaced_step_copy_insn, to be used
+ for post-step cleanup. */
+static struct displaced_step_closure *displaced_step_closure;
+
+/* The address of the original instruction, and the copy we made. */
+static CORE_ADDR displaced_step_original, displaced_step_copy;
+
+/* Saved contents of copy area. */
+static gdb_byte *displaced_step_saved_copy;
+
+/* When this is non-zero, we are allowed to use displaced stepping, if
+ the architecture supports it. When this is zero, we use
+ traditional the hold-and-step approach. */
+int can_use_displaced_stepping = 1;
+static void
+show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ fprintf_filtered (file, _("\
+Debugger's willingness to use displaced stepping to step over "
+"breakpoints is %s.\n"), value);
+}
+
+/* Return non-zero if displaced stepping is enabled, and can be used
+ with GDBARCH. */
+static int
+use_displaced_stepping (struct gdbarch *gdbarch)
+{
+ return (can_use_displaced_stepping
+ && gdbarch_displaced_step_copy_insn_p (gdbarch));
+}
+
+/* Clean out any stray displaced stepping state. */
+static void
+displaced_step_clear (void)
+{
+ /* Indicate that there is no cleanup pending. */
+ displaced_step_ptid = null_ptid;
+
+ if (displaced_step_closure)
+ {
+ gdbarch_displaced_step_free_closure (displaced_step_gdbarch,
+ displaced_step_closure);
+ displaced_step_closure = NULL;
+ }
+}
+
+static void
+cleanup_displaced_step_closure (void *ptr)
+{
+ struct displaced_step_closure *closure = ptr;
+
+ gdbarch_displaced_step_free_closure (current_gdbarch, closure);
+}
+
+/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
+void
+displaced_step_dump_bytes (struct ui_file *file,
+ const gdb_byte *buf,
+ size_t len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ fprintf_unfiltered (file, "%02x ", buf[i]);
+ fputs_unfiltered ("\n", file);
+}
+
+/* Prepare to single-step, using displaced stepping.
+
+ Note that we cannot use displaced stepping when we have a signal to
+ deliver. If we have a signal to deliver and an instruction to step
+ over, then after the step, there will be no indication from the
+ target whether the thread entered a signal handler or ignored the
+ signal and stepped over the instruction successfully --- both cases
+ result in a simple SIGTRAP. In the first case we mustn't do a
+ fixup, and in the second case we must --- but we can't tell which.
+ Comments in the code for 'random signals' in handle_inferior_event
+ explain how we handle this case instead.
+
+ Returns 1 if preparing was successful -- this thread is going to be
+ stepped now; or 0 if displaced stepping this thread got queued. */
+static int
+displaced_step_prepare (ptid_t ptid)
+{
+ struct cleanup *old_cleanups;
+ struct regcache *regcache = get_thread_regcache (ptid);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ CORE_ADDR original, copy;
+ ULONGEST len;
+ struct displaced_step_closure *closure;
+
+ /* We should never reach this function if the architecture does not
+ support displaced stepping. */
+ gdb_assert (gdbarch_displaced_step_copy_insn_p (gdbarch));
+
+ /* For the first cut, we're displaced stepping one thread at a
+ time. */
+
+ if (!ptid_equal (displaced_step_ptid, null_ptid))
+ {
+ /* Already waiting for a displaced step to finish. Defer this
+ request and place in queue. */
+ struct displaced_step_request *req, *new_req;
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: defering step of %s\n",
+ target_pid_to_str (ptid));
+
+ new_req = xmalloc (sizeof (*new_req));
+ new_req->ptid = ptid;
+ new_req->next = NULL;
+
+ if (displaced_step_request_queue)
+ {
+ for (req = displaced_step_request_queue;
+ req && req->next;
+ req = req->next)
+ ;
+ req->next = new_req;
+ }
+ else
+ displaced_step_request_queue = new_req;
+
+ return 0;
+ }
+ else
+ {
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: stepping %s now\n",
+ target_pid_to_str (ptid));
+ }
+
+ displaced_step_clear ();
+
+ original = regcache_read_pc (regcache);
+
+ copy = gdbarch_displaced_step_location (gdbarch);
+ len = gdbarch_max_insn_length (gdbarch);
+
+ /* Save the original contents of the copy area. */
+ displaced_step_saved_copy = xmalloc (len);
+ old_cleanups = make_cleanup (free_current_contents,
+ &displaced_step_saved_copy);
+ read_memory (copy, displaced_step_saved_copy, len);
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog, "displaced: saved 0x%s: ",
+ paddr_nz (copy));
+ displaced_step_dump_bytes (gdb_stdlog, displaced_step_saved_copy, len);
+ };
+
+ closure = gdbarch_displaced_step_copy_insn (gdbarch,
+ original, copy, regcache);
+
+ /* We don't support the fully-simulated case at present. */
+ gdb_assert (closure);
+
+ make_cleanup (cleanup_displaced_step_closure, closure);
+
+ /* Resume execution at the copy. */
+ regcache_write_pc (regcache, copy);
+
+ discard_cleanups (old_cleanups);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to 0x%s\n",
+ paddr_nz (copy));
+
+ /* Save the information we need to fix things up if the step
+ succeeds. */
+ displaced_step_ptid = ptid;
+ displaced_step_gdbarch = gdbarch;
+ displaced_step_closure = closure;
+ displaced_step_original = original;
+ displaced_step_copy = copy;
+ return 1;
+}
+
+static void
+displaced_step_clear_cleanup (void *ignore)
+{
+ displaced_step_clear ();
+}
+
+static void
+write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
+{
+ struct cleanup *ptid_cleanup = save_inferior_ptid ();
+ inferior_ptid = ptid;
+ write_memory (memaddr, myaddr, len);
+ do_cleanups (ptid_cleanup);
+}
+
+static void
+displaced_step_fixup (ptid_t event_ptid, enum target_signal signal)
+{
+ struct cleanup *old_cleanups;
+
+ /* Was this event for the pid we displaced? */
+ if (ptid_equal (displaced_step_ptid, null_ptid)
+ || ! ptid_equal (displaced_step_ptid, event_ptid))
+ return;
+
+ old_cleanups = make_cleanup (displaced_step_clear_cleanup, 0);
+
+ /* Restore the contents of the copy area. */
+ {
+ ULONGEST len = gdbarch_max_insn_length (displaced_step_gdbarch);
+ write_memory_ptid (displaced_step_ptid, displaced_step_copy,
+ displaced_step_saved_copy, len);
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: restored 0x%s\n",
+ paddr_nz (displaced_step_copy));
+ }
+
+ /* Did the instruction complete successfully? */
+ if (signal == TARGET_SIGNAL_TRAP)
+ {
+ /* Fix up the resulting state. */
+ gdbarch_displaced_step_fixup (displaced_step_gdbarch,
+ displaced_step_closure,
+ displaced_step_original,
+ displaced_step_copy,
+ get_thread_regcache (displaced_step_ptid));
+ }
+ else
+ {
+ /* Since the instruction didn't complete, all we can do is
+ relocate the PC. */
+ struct regcache *regcache = get_thread_regcache (event_ptid);
+ CORE_ADDR pc = regcache_read_pc (regcache);
+ pc = displaced_step_original + (pc - displaced_step_copy);
+ regcache_write_pc (regcache, pc);
+ }
+
+ do_cleanups (old_cleanups);
+
+ /* Are there any pending displaced stepping requests? If so, run
+ one now. */
+ if (displaced_step_request_queue)
+ {
+ struct displaced_step_request *head;
+ ptid_t ptid;
+
+ head = displaced_step_request_queue;
+ ptid = head->ptid;
+ displaced_step_request_queue = head->next;
+ xfree (head);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog,
+ "displaced: stepping queued %s now\n",
+ target_pid_to_str (ptid));
+
+
+ displaced_step_ptid = null_ptid;
+ displaced_step_prepare (ptid);
+ target_resume (ptid, 1, TARGET_SIGNAL_0);
+ }
+}
+
+/* Update global variables holding ptids to hold NEW_PTID if they were
+ holding OLD_PTID. */
+static void
+infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
+{
+ struct displaced_step_request *it;
+
+ if (ptid_equal (inferior_ptid, old_ptid))
+ inferior_ptid = new_ptid;
+
+ if (ptid_equal (singlestep_ptid, old_ptid))
+ singlestep_ptid = new_ptid;
+
+ if (ptid_equal (displaced_step_ptid, old_ptid))
+ displaced_step_ptid = new_ptid;
+
+ if (ptid_equal (deferred_step_ptid, old_ptid))
+ deferred_step_ptid = new_ptid;
+
+ for (it = displaced_step_request_queue; it; it = it->next)
+ if (ptid_equal (it->ptid, old_ptid))
+ it->ptid = new_ptid;
+}
+
\f
+/* Resuming. */
/* Things to clean up if we QUIT out of resume (). */
static void
{
int should_resume = 1;
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct thread_info *tp = inferior_thread ();
+ CORE_ADDR pc = regcache_read_pc (regcache);
QUIT;
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
- step, sig);
-
- /* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
-
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: resume (step=%d, signal=%d), "
+ "trap_expected=%d\n",
+ step, sig, tp->trap_expected);
/* Some targets (e.g. Solaris x86) have a kernel bug when stepping
over an instruction that causes a page fault without triggering
Work around the problem by removing hardware watchpoints if a step is
requested, GDB will check for a hardware watchpoint trigger after the
step anyway. */
- if (CANNOT_STEP_HW_WATCHPOINTS && step && breakpoints_inserted)
+ if (CANNOT_STEP_HW_WATCHPOINTS && step)
remove_hw_watchpoints ();
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
- if (breakpoint_here_p (read_pc ()) == permanent_breakpoint_here)
- SKIP_PERMANENT_BREAKPOINT ();
+ if (breakpoint_here_p (pc) == permanent_breakpoint_here)
+ {
+ if (gdbarch_skip_permanent_breakpoint_p (gdbarch))
+ gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
+ else
+ error (_("\
+The program is stopped at a permanent breakpoint, but GDB does not know\n\
+how to step past a permanent breakpoint on this architecture. Try using\n\
+a command like `return' or `jump' to continue execution."));
+ }
+
+ /* If enabled, step over breakpoints by executing a copy of the
+ instruction at a different address.
+
+ We can't use displaced stepping when we have a signal to deliver;
+ the comments for displaced_step_prepare explain why. The
+ comments in the handle_inferior event for dealing with 'random
+ signals' explain what we do instead. */
+ if (use_displaced_stepping (gdbarch)
+ && tp->trap_expected
+ && sig == TARGET_SIGNAL_0)
+ {
+ if (!displaced_step_prepare (inferior_ptid))
+ {
+ /* Got placed in displaced stepping queue. Will be resumed
+ later when all the currently queued displaced stepping
+ requests finish. The thread is not executing at this point,
+ and the call to set_executing will be made later. But we
+ need to call set_running here, since from frontend point of view,
+ the thread is running. */
+ set_running (inferior_ptid, 1);
+ discard_cleanups (old_cleanups);
+ return;
+ }
+ }
- if (SOFTWARE_SINGLE_STEP_P () && step)
+ if (step && gdbarch_software_single_step_p (gdbarch))
{
/* Do it the hard way, w/temp breakpoints */
- SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints */ );
- /* ...and don't ask hardware to do it. */
- step = 0;
- /* and do not pull these breakpoints until after a `wait' in
- `wait_for_inferior' */
- singlestep_breakpoints_inserted_p = 1;
- singlestep_ptid = inferior_ptid;
- singlestep_pc = read_pc ();
+ if (gdbarch_software_single_step (gdbarch, get_current_frame ()))
+ {
+ /* ...and don't ask hardware to do it. */
+ step = 0;
+ /* and do not pull these breakpoints until after a `wait' in
+ `wait_for_inferior' */
+ singlestep_breakpoints_inserted_p = 1;
+ singlestep_ptid = inferior_ptid;
+ singlestep_pc = pc;
+ }
}
/* If there were any forks/vforks/execs that were caught and are
resume_ptid = RESUME_ALL; /* Default */
- if ((step || singlestep_breakpoints_inserted_p)
- && (stepping_past_singlestep_breakpoint
- || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
+ /* If STEP is set, it's a request to use hardware stepping
+ facilities. But in that case, we should never
+ use singlestep breakpoint. */
+ gdb_assert (!(singlestep_breakpoints_inserted_p && step));
+
+ if (singlestep_breakpoints_inserted_p
+ && stepping_past_singlestep_breakpoint)
{
- /* Stepping past a breakpoint without inserting breakpoints.
- Make sure only the current thread gets to step, so that
- other threads don't sneak past breakpoints while they are
- not inserted. */
+ /* The situation here is as follows. In thread T1 we wanted to
+ single-step. Lacking hardware single-stepping we've
+ set breakpoint at the PC of the next instruction -- call it
+ P. After resuming, we've hit that breakpoint in thread T2.
+ Now we've removed original breakpoint, inserted breakpoint
+ at P+1, and try to step to advance T2 past breakpoint.
+ We need to step only T2, as if T1 is allowed to freely run,
+ it can run past P, and if other threads are allowed to run,
+ they can hit breakpoint at P+1, and nested hits of single-step
+ breakpoints is not something we'd want -- that's complicated
+ to support, and has no value. */
+ resume_ptid = inferior_ptid;
+ }
+ if ((step || singlestep_breakpoints_inserted_p)
+ && tp->trap_expected)
+ {
+ /* We're allowing a thread to run past a breakpoint it has
+ hit, by single-stepping the thread with the breakpoint
+ removed. In which case, we need to single-step only this
+ thread, and keep others stopped, as they can miss this
+ breakpoint if allowed to run.
+
+ The current code actually removes all breakpoints when
+ doing this, not just the one being stepped over, so if we
+ let other threads run, we can actually miss any
+ breakpoint, not just the one at PC. */
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on)
- || (scheduler_mode == schedlock_step
- && (step || singlestep_breakpoints_inserted_p)))
+ if (non_stop)
+ {
+ /* With non-stop mode on, threads are always handled
+ individually. */
+ resume_ptid = inferior_ptid;
+ }
+ else if ((scheduler_mode == schedlock_on)
+ || (scheduler_mode == schedlock_step
+ && (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
}
- if (CANNOT_STEP_BREAKPOINT)
+ if (gdbarch_cannot_step_breakpoint (gdbarch))
{
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
continue and we will hit it anyway. */
- if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+ if (step && breakpoint_inserted_here_p (pc))
step = 0;
}
+
+ if (debug_displaced
+ && use_displaced_stepping (gdbarch)
+ && tp->trap_expected)
+ {
+ struct regcache *resume_regcache = get_thread_regcache (resume_ptid);
+ CORE_ADDR actual_pc = regcache_read_pc (resume_regcache);
+ gdb_byte buf[4];
+
+ fprintf_unfiltered (gdb_stdlog, "displaced: run 0x%s: ",
+ paddr_nz (actual_pc));
+ read_memory (actual_pc, buf, sizeof (buf));
+ displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
+ }
+
target_resume (resume_ptid, step, sig);
+
+ /* Avoid confusing the next resume, if the next stop/resume
+ happens to apply to another thread. */
+ tp->stop_signal = TARGET_SIGNAL_0;
}
discard_cleanups (old_cleanups);
}
\f
+/* Proceeding. */
/* Clear out all variables saying what to do when inferior is continued.
First do this, then set the ones you want, then call `proceed'. */
void
clear_proceed_status (void)
{
- trap_expected = 0;
- step_range_start = 0;
- step_range_end = 0;
- step_frame_id = null_frame_id;
- step_over_calls = STEP_OVER_UNDEBUGGABLE;
+ if (!ptid_equal (inferior_ptid, null_ptid))
+ {
+ struct thread_info *tp = inferior_thread ();
+
+ tp->trap_expected = 0;
+ tp->step_range_start = 0;
+ tp->step_range_end = 0;
+ tp->step_frame_id = null_frame_id;
+ tp->step_over_calls = STEP_OVER_UNDEBUGGABLE;
+
+ tp->stop_step = 0;
+
+ tp->proceed_to_finish = 0;
+
+ /* Discard any remaining commands or status from previous
+ stop. */
+ bpstat_clear (&tp->stop_bpstat);
+ }
+
stop_after_trap = 0;
stop_soon = NO_STOP_QUIETLY;
- proceed_to_finish = 0;
breakpoint_proceeded = 1; /* We're about to proceed... */
- /* Discard any remaining commands or status from previous stop. */
- bpstat_clear (&stop_bpstat);
+ if (stop_registers)
+ {
+ regcache_xfree (stop_registers);
+ stop_registers = NULL;
+ }
}
/* This should be suitable for any targets that support threads. */
static int
-prepare_to_proceed (void)
+prepare_to_proceed (int step)
{
ptid_t wait_ptid;
struct target_waitstatus wait_status;
/* Get the last target status returned by target_wait(). */
get_last_target_status (&wait_ptid, &wait_status);
- /* Make sure we were stopped either at a breakpoint, or because
- of a Ctrl-C. */
+ /* Make sure we were stopped at a breakpoint. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP
- && wait_status.value.sig != TARGET_SIGNAL_INT))
+ || wait_status.value.sig != TARGET_SIGNAL_TRAP)
{
return 0;
}
+ /* Switched over from WAIT_PID. */
if (!ptid_equal (wait_ptid, minus_one_ptid)
&& !ptid_equal (inferior_ptid, wait_ptid))
{
- /* Switched over from WAIT_PID. */
- CORE_ADDR wait_pc = read_pc_pid (wait_ptid);
+ struct regcache *regcache = get_thread_regcache (wait_ptid);
- if (wait_pc != read_pc ())
+ if (breakpoint_here_p (regcache_read_pc (regcache)))
{
+ /* If stepping, remember current thread to switch back to. */
+ if (step)
+ deferred_step_ptid = inferior_ptid;
+
/* Switch back to WAIT_PID thread. */
- inferior_ptid = wait_ptid;
+ switch_to_thread (wait_ptid);
- /* FIXME: This stuff came from switch_to_thread() in
- thread.c (which should probably be a public function). */
- reinit_frame_cache ();
- registers_changed ();
- stop_pc = wait_pc;
+ /* We return 1 to indicate that there is a breakpoint here,
+ so we need to step over it before continuing to avoid
+ hitting it straight away. */
+ return 1;
}
-
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- if (breakpoint_here_p (wait_pc))
- return 1;
}
return 0;
-
}
-/* Record the pc of the program the last time it stopped. This is
- just used internally by wait_for_inferior, but need to be preserved
- over calls to it and cleared when the inferior is started. */
-static CORE_ADDR prev_pc;
-
/* Basic routine for continuing the program in various fashions.
ADDR is the address to resume at, or -1 for resume where stopped.
void
proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct thread_info *tp;
+ CORE_ADDR pc = regcache_read_pc (regcache);
int oneproc = 0;
+ enum target_signal stop_signal;
if (step > 0)
- step_start_function = find_pc_function (read_pc ());
+ step_start_function = find_pc_function (pc);
if (step < 0)
stop_after_trap = 1;
if (addr == (CORE_ADDR) -1)
{
- if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ if (pc == stop_pc && breakpoint_here_p (pc))
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint). */
oneproc = 1;
- else if (gdbarch_single_step_through_delay_p (current_gdbarch)
- && gdbarch_single_step_through_delay (current_gdbarch,
- get_current_frame ()))
+ else if (gdbarch_single_step_through_delay_p (gdbarch)
+ && gdbarch_single_step_through_delay (gdbarch,
+ get_current_frame ()))
/* We stepped onto an instruction that needs to be stepped
again before re-inserting the breakpoint, do so. */
oneproc = 1;
}
else
{
- write_pc (addr);
+ regcache_write_pc (regcache, addr);
}
if (debug_infrun)
"infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
paddr_nz (addr), siggnal, step);
- /* In a multi-threaded task we may select another thread
- and then continue or step.
-
- But if the old thread was stopped at a breakpoint, it
- will immediately cause another breakpoint stop without
- any execution (i.e. it will report a breakpoint hit
- incorrectly). So we must step over it first.
+ if (non_stop)
+ /* In non-stop, each thread is handled individually. The context
+ must already be set to the right thread here. */
+ ;
+ else
+ {
+ /* In a multi-threaded task we may select another thread and
+ then continue or step.
+
+ But if the old thread was stopped at a breakpoint, it will
+ immediately cause another breakpoint stop without any
+ execution (i.e. it will report a breakpoint hit incorrectly).
+ So we must step over it first.
+
+ prepare_to_proceed checks the current thread against the
+ thread that reported the most recent event. If a step-over
+ is required it returns TRUE and sets the current thread to
+ the old thread. */
+ if (prepare_to_proceed (step))
+ oneproc = 1;
+ }
- prepare_to_proceed checks the current thread against the thread
- that reported the most recent event. If a step-over is required
- it returns TRUE and sets the current thread to the old thread. */
- if (prepare_to_proceed () && breakpoint_here_p (read_pc ()))
- oneproc = 1;
+ /* prepare_to_proceed may change the current thread. */
+ tp = inferior_thread ();
if (oneproc)
- /* We will get a trace trap after one instruction.
- Continue it automatically and insert breakpoints then. */
- trap_expected = 1;
- else
{
- insert_breakpoints ();
- /* If we get here there was no call to error() in
- insert breakpoints -- so they were inserted. */
- breakpoints_inserted = 1;
+ tp->trap_expected = 1;
+ /* If displaced stepping is enabled, we can step over the
+ breakpoint without hitting it, so leave all breakpoints
+ inserted. Otherwise we need to disable all breakpoints, step
+ one instruction, and then re-add them when that step is
+ finished. */
+ if (!use_displaced_stepping (gdbarch))
+ remove_breakpoints ();
+ }
+
+ /* We can insert breakpoints if we're not trying to step over one,
+ or if we are stepping over one but we're using displaced stepping
+ to do so. */
+ if (! tp->trap_expected || use_displaced_stepping (gdbarch))
+ insert_breakpoints ();
+
+ if (!non_stop)
+ {
+ /* Pass the last stop signal to the thread we're resuming,
+ irrespective of whether the current thread is the thread that
+ got the last event or not. This was historically GDB's
+ behaviour before keeping a stop_signal per thread. */
+
+ struct thread_info *last_thread;
+ ptid_t last_ptid;
+ struct target_waitstatus last_status;
+
+ get_last_target_status (&last_ptid, &last_status);
+ if (!ptid_equal (inferior_ptid, last_ptid)
+ && !ptid_equal (last_ptid, null_ptid)
+ && !ptid_equal (last_ptid, minus_one_ptid))
+ {
+ last_thread = find_thread_pid (last_ptid);
+ if (last_thread)
+ {
+ tp->stop_signal = last_thread->stop_signal;
+ last_thread->stop_signal = TARGET_SIGNAL_0;
+ }
+ }
}
if (siggnal != TARGET_SIGNAL_DEFAULT)
- stop_signal = siggnal;
+ tp->stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (!signal_program[stop_signal])
- stop_signal = TARGET_SIGNAL_0;
+ else if (!signal_program[tp->stop_signal])
+ tp->stop_signal = TARGET_SIGNAL_0;
annotate_starting ();
the prev_pc value before calculating the line number. This approach
did not work because on platforms that use ptrace, the pc register
cannot be read unless the inferior is stopped. At that point, we
- are not guaranteed the inferior is stopped and so the read_pc ()
+ are not guaranteed the inferior is stopped and so the regcache_read_pc ()
call can fail. Setting the prev_pc value here ensures the value is
updated correctly when the inferior is stopped. */
- prev_pc = read_pc ();
+ tp->prev_pc = regcache_read_pc (get_current_regcache ());
+
+ /* Fill in with reasonable starting values. */
+ init_thread_stepping_state (tp);
+
+ /* Reset to normal state. */
+ init_infwait_state ();
/* Resume inferior. */
- resume (oneproc || step || bpstat_should_step (), stop_signal);
+ resume (oneproc || step || bpstat_should_step (), tp->stop_signal);
/* Wait for it to stop (if not standalone)
and in any case decode why it stopped, and act accordingly. */
does not support asynchronous execution. */
if (!target_can_async_p ())
{
- wait_for_inferior ();
+ wait_for_inferior (0);
normal_stop ();
}
}
void
start_remote (int from_tty)
{
- init_thread_list ();
init_wait_for_inferior ();
- stop_soon = STOP_QUIETLY;
- trap_expected = 0;
+ stop_soon = STOP_QUIETLY_REMOTE;
/* Always go on waiting for the target, regardless of the mode. */
/* FIXME: cagney/1999-09-23: At present it isn't possible to
target_open() return to the caller an indication that the target
is currently running and GDB state should be set to the same as
for an async run. */
- wait_for_inferior ();
+ wait_for_inferior (0);
/* Now that the inferior has stopped, do any bookkeeping like
loading shared libraries. We want to do this before normal_stop,
init_wait_for_inferior (void)
{
/* These are meaningless until the first time through wait_for_inferior. */
- prev_pc = 0;
- breakpoints_inserted = 0;
breakpoint_init_inferior (inf_starting);
- /* Don't confuse first call to proceed(). */
- stop_signal = TARGET_SIGNAL_0;
-
/* The first resume is not following a fork/vfork/exec. */
pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
+ deferred_step_ptid = null_ptid;
+
+ target_last_wait_ptid = minus_one_ptid;
+
+ previous_inferior_ptid = null_ptid;
+ init_infwait_state ();
+
+ displaced_step_clear ();
}
+
\f
/* This enum encodes possible reasons for doing a target_wait, so that
wfi can call target_wait in one place. (Ultimately the call will be
{
infwait_normal_state,
infwait_thread_hop_state,
+ infwait_step_watch_state,
infwait_nonstep_watch_state
};
SIGNAL_RECEIVED
};
-/* This structure contains what used to be local variables in
- wait_for_inferior. Probably many of them can return to being
- locals in handle_inferior_event. */
+/* The PTID we'll do a target_wait on.*/
+ptid_t waiton_ptid;
+/* Current inferior wait state. */
+enum infwait_states infwait_state;
+
+/* Data to be passed around while handling an event. This data is
+ discarded between events. */
struct execution_control_state
{
+ ptid_t ptid;
+ /* The thread that got the event, if this was a thread event; NULL
+ otherwise. */
+ struct thread_info *event_thread;
+
struct target_waitstatus ws;
- struct target_waitstatus *wp;
- int another_trap;
int random_signal;
CORE_ADDR stop_func_start;
CORE_ADDR stop_func_end;
char *stop_func_name;
- struct symtab_and_line sal;
- int current_line;
- struct symtab *current_symtab;
- int handling_longjmp; /* FIXME */
- ptid_t ptid;
- ptid_t saved_inferior_ptid;
- int step_after_step_resume_breakpoint;
- int stepping_through_solib_after_catch;
- bpstat stepping_through_solib_catchpoints;
int new_thread_event;
- struct target_waitstatus tmpstatus;
- enum infwait_states infwait_state;
- ptid_t waiton_ptid;
int wait_some_more;
};
static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
struct frame_id sr_id);
+static void insert_longjmp_resume_breakpoint (CORE_ADDR);
+
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
static void print_stop_reason (enum inferior_stop_reason stop_reason,
int stop_info);
+/* Callback for iterate_over_threads. */
+
+static int
+delete_step_resume_breakpoint_callback (struct thread_info *info, void *data)
+{
+ if (is_exited (info->ptid))
+ return 0;
+
+ delete_step_resume_breakpoint (info);
+ return 0;
+}
+
+/* In all-stop, delete the step resume breakpoint of any thread that
+ had one. In non-stop, delete the step resume breakpoint of the
+ thread that just stopped. */
+
+static void
+delete_step_thread_step_resume_breakpoint (void)
+{
+ if (!target_has_execution
+ || ptid_equal (inferior_ptid, null_ptid))
+ /* If the inferior has exited, we have already deleted the step
+ resume breakpoints out of GDB's lists. */
+ return;
+
+ if (non_stop)
+ {
+ /* If in non-stop mode, only delete the step-resume or
+ longjmp-resume breakpoint of the thread that just stopped
+ stepping. */
+ struct thread_info *tp = inferior_thread ();
+ delete_step_resume_breakpoint (tp);
+ }
+ else
+ /* In all-stop mode, delete all step-resume and longjmp-resume
+ breakpoints of any thread that had them. */
+ iterate_over_threads (delete_step_resume_breakpoint_callback, NULL);
+}
+
+/* A cleanup wrapper. */
+
+static void
+delete_step_thread_step_resume_breakpoint_cleanup (void *arg)
+{
+ delete_step_thread_step_resume_breakpoint ();
+}
+
/* Wait for control to return from inferior to debugger.
+
+ If TREAT_EXEC_AS_SIGTRAP is non-zero, then handle EXEC signals
+ as if they were SIGTRAP signals. This can be useful during
+ the startup sequence on some targets such as HP/UX, where
+ we receive an EXEC event instead of the expected SIGTRAP.
+
If inferior gets a signal, we may decide to start it up again
instead of returning. That is why there is a loop in this function.
When this function actually returns it means the inferior
should be left stopped and GDB should read more commands. */
void
-wait_for_inferior (void)
+wait_for_inferior (int treat_exec_as_sigtrap)
{
struct cleanup *old_cleanups;
struct execution_control_state ecss;
struct execution_control_state *ecs;
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: wait_for_inferior\n");
+ fprintf_unfiltered
+ (gdb_stdlog, "infrun: wait_for_inferior (treat_exec_as_sigtrap=%d)\n",
+ treat_exec_as_sigtrap);
- old_cleanups = make_cleanup (delete_step_resume_breakpoint,
- &step_resume_breakpoint);
+ old_cleanups =
+ make_cleanup (delete_step_thread_step_resume_breakpoint_cleanup, NULL);
- /* wfi still stays in a loop, so it's OK just to take the address of
- a local to get the ecs pointer. */
ecs = &ecss;
+ memset (ecs, 0, sizeof (*ecs));
- /* Fill in with reasonable starting values. */
- init_execution_control_state (ecs);
+ overlay_cache_invalid = 1;
- /* We'll update this if & when we switch to a new thread. */
+ /* We'll update this if & when we switch to a new thread. */
previous_inferior_ptid = inferior_ptid;
- overlay_cache_invalid = 1;
-
/* We have to invalidate the registers BEFORE calling target_wait
because they can be loaded from the target while in target_wait.
This makes remote debugging a bit more efficient for those
while (1)
{
if (deprecated_target_wait_hook)
- ecs->ptid = deprecated_target_wait_hook (ecs->waiton_ptid, ecs->wp);
+ ecs->ptid = deprecated_target_wait_hook (waiton_ptid, &ecs->ws);
else
- ecs->ptid = target_wait (ecs->waiton_ptid, ecs->wp);
+ ecs->ptid = target_wait (waiton_ptid, &ecs->ws);
+
+ if (treat_exec_as_sigtrap && ecs->ws.kind == TARGET_WAITKIND_EXECD)
+ {
+ xfree (ecs->ws.value.execd_pathname);
+ ecs->ws.kind = TARGET_WAITKIND_STOPPED;
+ ecs->ws.value.sig = TARGET_SIGNAL_TRAP;
+ }
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
if (!ecs->wait_some_more)
break;
}
+
do_cleanups (old_cleanups);
}
event loop whenever a change of state is detected on the file
descriptor corresponding to the target. It can be called more than
once to complete a single execution command. In such cases we need
- to keep the state in a global variable ASYNC_ECSS. If it is the
- last time that this function is called for a single execution
- command, then report to the user that the inferior has stopped, and
- do the necessary cleanups. */
-
-struct execution_control_state async_ecss;
-struct execution_control_state *async_ecs;
+ to keep the state in a global variable ECSS. If it is the last time
+ that this function is called for a single execution command, then
+ report to the user that the inferior has stopped, and do the
+ necessary cleanups. */
void
fetch_inferior_event (void *client_data)
{
- static struct cleanup *old_cleanups;
+ struct execution_control_state ecss;
+ struct execution_control_state *ecs = &ecss;
+ struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
+ int was_sync = sync_execution;
- async_ecs = &async_ecss;
+ memset (ecs, 0, sizeof (*ecs));
- if (!async_ecs->wait_some_more)
- {
- old_cleanups = make_exec_cleanup (delete_step_resume_breakpoint,
- &step_resume_breakpoint);
-
- /* Fill in with reasonable starting values. */
- init_execution_control_state (async_ecs);
+ overlay_cache_invalid = 1;
- /* We'll update this if & when we switch to a new thread. */
- previous_inferior_ptid = inferior_ptid;
+ /* We can only rely on wait_for_more being correct before handling
+ the event in all-stop, but previous_inferior_ptid isn't used in
+ non-stop. */
+ if (!ecs->wait_some_more)
+ /* We'll update this if & when we switch to a new thread. */
+ previous_inferior_ptid = inferior_ptid;
- overlay_cache_invalid = 1;
+ if (non_stop)
+ /* In non-stop mode, the user/frontend should not notice a thread
+ switch due to internal events. Make sure we reverse to the
+ user selected thread and frame after handling the event and
+ running any breakpoint commands. */
+ make_cleanup_restore_current_thread ();
- /* We have to invalidate the registers BEFORE calling target_wait
- because they can be loaded from the target while in target_wait.
- This makes remote debugging a bit more efficient for those
- targets that provide critical registers as part of their normal
- status mechanism. */
+ /* We have to invalidate the registers BEFORE calling target_wait
+ because they can be loaded from the target while in target_wait.
+ This makes remote debugging a bit more efficient for those
+ targets that provide critical registers as part of their normal
+ status mechanism. */
- registers_changed ();
- }
+ registers_changed ();
if (deprecated_target_wait_hook)
- async_ecs->ptid =
- deprecated_target_wait_hook (async_ecs->waiton_ptid, async_ecs->wp);
+ ecs->ptid =
+ deprecated_target_wait_hook (waiton_ptid, &ecs->ws);
else
- async_ecs->ptid = target_wait (async_ecs->waiton_ptid, async_ecs->wp);
+ ecs->ptid = target_wait (waiton_ptid, &ecs->ws);
+
+ if (non_stop
+ && ecs->ws.kind != TARGET_WAITKIND_IGNORE
+ && ecs->ws.kind != TARGET_WAITKIND_EXITED
+ && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
+ /* In non-stop mode, each thread is handled individually. Switch
+ early, so the global state is set correctly for this
+ thread. */
+ context_switch (ecs->ptid);
/* Now figure out what to do with the result of the result. */
- handle_inferior_event (async_ecs);
+ handle_inferior_event (ecs);
- if (!async_ecs->wait_some_more)
+ if (!ecs->wait_some_more)
{
- /* Do only the cleanups that have been added by this
- function. Let the continuations for the commands do the rest,
- if there are any. */
- do_exec_cleanups (old_cleanups);
- normal_stop ();
- if (step_multi && stop_step)
+ delete_step_thread_step_resume_breakpoint ();
+
+ if (stop_soon == NO_STOP_QUIETLY)
+ normal_stop ();
+
+ if (target_has_execution
+ && ecs->ws.kind != TARGET_WAITKIND_EXITED
+ && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
+ && ecs->event_thread->step_multi
+ && ecs->event_thread->stop_step)
inferior_event_handler (INF_EXEC_CONTINUE, NULL);
else
inferior_event_handler (INF_EXEC_COMPLETE, NULL);
}
+
+ /* Revert thread and frame. */
+ do_cleanups (old_chain);
+
+ /* If the inferior was in sync execution mode, and now isn't,
+ restore the prompt. */
+ if (was_sync && !sync_execution)
+ display_gdb_prompt (0);
}
/* Prepare an execution control state for looping through a
void
init_execution_control_state (struct execution_control_state *ecs)
{
- ecs->another_trap = 0;
ecs->random_signal = 0;
- ecs->step_after_step_resume_breakpoint = 0;
- ecs->handling_longjmp = 0; /* FIXME */
- ecs->stepping_through_solib_after_catch = 0;
- ecs->stepping_through_solib_catchpoints = NULL;
- ecs->sal = find_pc_line (prev_pc, 0);
- ecs->current_line = ecs->sal.line;
- ecs->current_symtab = ecs->sal.symtab;
- ecs->infwait_state = infwait_normal_state;
- ecs->waiton_ptid = pid_to_ptid (-1);
- ecs->wp = &(ecs->ws);
+}
+
+/* Clear context switchable stepping state. */
+
+void
+init_thread_stepping_state (struct thread_info *tss)
+{
+ struct symtab_and_line sal;
+
+ tss->stepping_over_breakpoint = 0;
+ tss->step_after_step_resume_breakpoint = 0;
+ tss->stepping_through_solib_after_catch = 0;
+ tss->stepping_through_solib_catchpoints = NULL;
+
+ sal = find_pc_line (tss->prev_pc, 0);
+ tss->current_line = sal.line;
+ tss->current_symtab = sal.symtab;
}
/* Return the cached copy of the last pid/waitstatus returned by
target_last_wait_ptid = minus_one_ptid;
}
-/* Switch thread contexts, maintaining "infrun state". */
+/* Switch thread contexts. */
static void
-context_switch (struct execution_control_state *ecs)
+context_switch (ptid_t ptid)
{
- /* Caution: it may happen that the new thread (or the old one!)
- is not in the thread list. In this case we must not attempt
- to "switch context", or we run the risk that our context may
- be lost. This may happen as a result of the target module
- mishandling thread creation. */
-
if (debug_infrun)
{
fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ",
target_pid_to_str (inferior_ptid));
fprintf_unfiltered (gdb_stdlog, "to %s\n",
- target_pid_to_str (ecs->ptid));
- }
-
- if (in_thread_list (inferior_ptid) && in_thread_list (ecs->ptid))
- { /* Perform infrun state context switch: */
- /* Save infrun state for the old thread. */
- save_infrun_state (inferior_ptid, prev_pc,
- trap_expected, step_resume_breakpoint,
- step_range_start,
- step_range_end, &step_frame_id,
- ecs->handling_longjmp, ecs->another_trap,
- ecs->stepping_through_solib_after_catch,
- ecs->stepping_through_solib_catchpoints,
- ecs->current_line, ecs->current_symtab);
-
- /* Load infrun state for the new thread. */
- load_infrun_state (ecs->ptid, &prev_pc,
- &trap_expected, &step_resume_breakpoint,
- &step_range_start,
- &step_range_end, &step_frame_id,
- &ecs->handling_longjmp, &ecs->another_trap,
- &ecs->stepping_through_solib_after_catch,
- &ecs->stepping_through_solib_catchpoints,
- &ecs->current_line, &ecs->current_symtab);
- }
- inferior_ptid = ecs->ptid;
- reinit_frame_cache ();
+ target_pid_to_str (ptid));
+ }
+
+ switch_to_thread (ptid);
}
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
+ struct regcache *regcache;
+ struct gdbarch *gdbarch;
CORE_ADDR breakpoint_pc;
- /* If this target does not decrement the PC after breakpoints, then
- we have nothing to do. */
- if (DECR_PC_AFTER_BREAK == 0)
- return;
-
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
we aren't, just return.
We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
- affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
- by software breakpoints should be handled through the normal breakpoint
- layer.
+ affected by gdbarch_decr_pc_after_break. Other waitkinds which are
+ implemented by software breakpoints should be handled through the normal
+ breakpoint layer.
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
- DECR_PC_AFTER_BREAK. I don't know any specific target that generates
- these signals at breakpoints (the code has been in GDB since at least
- 1992) so I can not guess how to handle them here.
+ gdbarch_decr_pc_after_break. I don't know any specific target that
+ generates these signals at breakpoints (the code has been in GDB since at
+ least 1992) so I can not guess how to handle them here.
- In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
- would have the PC after hitting a watchpoint affected by
- DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
- in GDB history, and it seems unlikely to be correct, so
- HAVE_NONSTEPPABLE_WATCHPOINTS is not checked here. */
+ In earlier versions of GDB, a target with
+ gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a
+ watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any
+ target with both of these set in GDB history, and it seems unlikely to be
+ correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */
if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
return;
if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
return;
+ /* If this target does not decrement the PC after breakpoints, then
+ we have nothing to do. */
+ regcache = get_thread_regcache (ecs->ptid);
+ gdbarch = get_regcache_arch (regcache);
+ if (gdbarch_decr_pc_after_break (gdbarch) == 0)
+ return;
+
/* Find the location where (if we've hit a breakpoint) the
breakpoint would be. */
- breakpoint_pc = read_pc_pid (ecs->ptid) - DECR_PC_AFTER_BREAK;
-
- if (SOFTWARE_SINGLE_STEP_P ())
- {
- /* When using software single-step, a SIGTRAP can only indicate
- an inserted breakpoint. This actually makes things
- easier. */
- if (singlestep_breakpoints_inserted_p)
- /* When software single stepping, the instruction at [prev_pc]
- is never a breakpoint, but the instruction following
- [prev_pc] (in program execution order) always is. Assume
- that following instruction was reached and hence a software
- breakpoint was hit. */
- write_pc_pid (breakpoint_pc, ecs->ptid);
- else if (software_breakpoint_inserted_here_p (breakpoint_pc))
- /* The inferior was free running (i.e., no single-step
- breakpoints inserted) and it hit a software breakpoint. */
- write_pc_pid (breakpoint_pc, ecs->ptid);
- }
- else
- {
- /* When using hardware single-step, a SIGTRAP is reported for
- both a completed single-step and a software breakpoint. Need
- to differentiate between the two as the latter needs
- adjusting but the former does not.
+ breakpoint_pc = regcache_read_pc (regcache)
+ - gdbarch_decr_pc_after_break (gdbarch);
- When the thread to be examined does not match the current thread
- context we can't use currently_stepping, so assume no
- single-stepping in this case. */
- if (ptid_equal (ecs->ptid, inferior_ptid) && currently_stepping (ecs))
- {
- if (prev_pc == breakpoint_pc
- && software_breakpoint_inserted_here_p (breakpoint_pc))
- /* Hardware single-stepped a software breakpoint (as
- occures when the inferior is resumed with PC pointing
- at not-yet-hit software breakpoint). Since the
- breakpoint really is executed, the inferior needs to be
- backed up to the breakpoint address. */
- write_pc_pid (breakpoint_pc, ecs->ptid);
- }
- else
- {
- if (software_breakpoint_inserted_here_p (breakpoint_pc))
- /* The inferior was free running (i.e., no hardware
- single-step and no possibility of a false SIGTRAP) and
- hit a software breakpoint. */
- write_pc_pid (breakpoint_pc, ecs->ptid);
- }
+ /* Check whether there actually is a software breakpoint inserted
+ at that location. */
+ if (software_breakpoint_inserted_here_p (breakpoint_pc))
+ {
+ /* When using hardware single-step, a SIGTRAP is reported for both
+ a completed single-step and a software breakpoint. Need to
+ differentiate between the two, as the latter needs adjusting
+ but the former does not.
+
+ The SIGTRAP can be due to a completed hardware single-step only if
+ - we didn't insert software single-step breakpoints
+ - the thread to be examined is still the current thread
+ - this thread is currently being stepped
+
+ If any of these events did not occur, we must have stopped due
+ to hitting a software breakpoint, and have to back up to the
+ breakpoint address.
+
+ As a special case, we could have hardware single-stepped a
+ software breakpoint. In this case (prev_pc == breakpoint_pc),
+ we also need to back up to the breakpoint address. */
+
+ if (singlestep_breakpoints_inserted_p
+ || !ptid_equal (ecs->ptid, inferior_ptid)
+ || !currently_stepping (ecs->event_thread)
+ || ecs->event_thread->prev_pc == breakpoint_pc)
+ regcache_write_pc (regcache, breakpoint_pc);
}
}
+void
+init_infwait_state (void)
+{
+ waiton_ptid = pid_to_ptid (-1);
+ infwait_state = infwait_normal_state;
+}
+
+void
+error_is_running (void)
+{
+ error (_("\
+Cannot execute this command while the selected thread is running."));
+}
+
+void
+ensure_not_running (void)
+{
+ if (is_running (inferior_ptid))
+ error_is_running ();
+}
+
/* Given an execution control state that has been freshly filled in
by an event from the inferior, figure out what it means and take
appropriate action. */
-int stepped_after_stopped_by_watchpoint;
-
void
handle_inferior_event (struct execution_control_state *ecs)
{
- /* NOTE: bje/2005-05-02: If you're looking at this code and thinking
- that the variable stepped_after_stopped_by_watchpoint isn't used,
- then you're wrong! See remote.c:remote_stopped_data_address. */
-
int sw_single_step_trap_p = 0;
- int stopped_by_watchpoint = -1; /* Mark as unknown. */
+ int stopped_by_watchpoint;
+ int stepped_after_stopped_by_watchpoint = 0;
+ struct symtab_and_line stop_pc_sal;
+
+ breakpoint_retire_moribund ();
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
- target_last_waitstatus = *ecs->wp;
+ target_last_waitstatus = ecs->ws;
+
+ /* Always clear state belonging to the previous time we stopped. */
+ stop_stack_dummy = 0;
+
+ /* If it's a new process, add it to the thread database */
+
+ ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
+ && !ptid_equal (ecs->ptid, minus_one_ptid)
+ && !in_thread_list (ecs->ptid));
+
+ if (ecs->ws.kind != TARGET_WAITKIND_EXITED
+ && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
+ add_thread (ecs->ptid);
+ ecs->event_thread = find_thread_pid (ecs->ptid);
+
+ /* Dependent on valid ECS->EVENT_THREAD. */
adjust_pc_after_break (ecs);
- switch (ecs->infwait_state)
+ /* Dependent on the current PC value modified by adjust_pc_after_break. */
+ reinit_frame_cache ();
+
+ if (ecs->ws.kind != TARGET_WAITKIND_IGNORE)
+ {
+ /* Mark the non-executing threads accordingly. */
+ if (!non_stop
+ || ecs->ws.kind == TARGET_WAITKIND_EXITED
+ || ecs->ws.kind == TARGET_WAITKIND_SIGNALLED)
+ set_executing (pid_to_ptid (-1), 0);
+ else
+ set_executing (ecs->ptid, 0);
+ }
+
+ switch (infwait_state)
{
case infwait_thread_hop_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
/* Cancel the waiton_ptid. */
- ecs->waiton_ptid = pid_to_ptid (-1);
+ waiton_ptid = pid_to_ptid (-1);
break;
case infwait_normal_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
- stepped_after_stopped_by_watchpoint = 0;
+ break;
+
+ case infwait_step_watch_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: infwait_step_watch_state\n");
+
+ stepped_after_stopped_by_watchpoint = 1;
break;
case infwait_nonstep_watch_state:
default:
internal_error (__FILE__, __LINE__, _("bad switch"));
}
- ecs->infwait_state = infwait_normal_state;
-
- reinit_frame_cache ();
-
- /* If it's a new process, add it to the thread database */
-
- ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
- && !ptid_equal (ecs->ptid, minus_one_ptid)
- && !in_thread_list (ecs->ptid));
-
- if (ecs->ws.kind != TARGET_WAITKIND_EXITED
- && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
- {
- add_thread (ecs->ptid);
-
- ui_out_text (uiout, "[New ");
- ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
- ui_out_text (uiout, "]\n");
- }
+ infwait_state = infwait_normal_state;
switch (ecs->ws.kind)
{
case TARGET_WAITKIND_LOADED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
- /* Ignore gracefully during startup of the inferior, as it
- might be the shell which has just loaded some objects,
- otherwise add the symbols for the newly loaded objects. */
-#ifdef SOLIB_ADD
+ /* Ignore gracefully during startup of the inferior, as it might
+ be the shell which has just loaded some objects, otherwise
+ add the symbols for the newly loaded objects. Also ignore at
+ the beginning of an attach or remote session; we will query
+ the full list of libraries once the connection is
+ established. */
if (stop_soon == NO_STOP_QUIETLY)
{
- /* Remove breakpoints, SOLIB_ADD might adjust
- breakpoint addresses via breakpoint_re_set. */
- if (breakpoints_inserted)
- remove_breakpoints ();
-
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
terminal for any messages produced by
exec/process stratum, instead relying on the target stack
to propagate relevant changes (stop, section table
changed, ...) up to other layers. */
+#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
+#else
+ solib_add (NULL, 0, ¤t_target, auto_solib_add);
+#endif
target_terminal_inferior ();
- /* Reinsert breakpoints and continue. */
- if (breakpoints_inserted)
+ /* If requested, stop when the dynamic linker notifies
+ gdb of events. This allows the user to get control
+ and place breakpoints in initializer routines for
+ dynamically loaded objects (among other things). */
+ if (stop_on_solib_events)
+ {
+ stop_stepping (ecs);
+ return;
+ }
+
+ /* NOTE drow/2007-05-11: This might be a good place to check
+ for "catch load". */
+ }
+
+ /* If we are skipping through a shell, or through shared library
+ loading that we aren't interested in, resume the program. If
+ we're running the program normally, also resume. But stop if
+ we're attaching or setting up a remote connection. */
+ if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
+ {
+ /* Loading of shared libraries might have changed breakpoint
+ addresses. Make sure new breakpoints are inserted. */
+ if (stop_soon == NO_STOP_QUIETLY
+ && !breakpoints_always_inserted_mode ())
insert_breakpoints ();
+ resume (0, TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
}
-#endif
- resume (0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
+
+ break;
case TARGET_WAITKIND_SPURIOUS:
if (debug_infrun)
/* Record the exit code in the convenience variable $_exitcode, so
that the user can inspect this again later. */
set_internalvar (lookup_internalvar ("_exitcode"),
- value_from_longest (builtin_type_int,
+ value_from_longest (builtin_type_int32,
(LONGEST) ecs->ws.value.integer));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ singlestep_breakpoints_inserted_p = 0;
stop_print_frame = 0;
stop_stepping (ecs);
return;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
stop_print_frame = 0;
- stop_signal = ecs->ws.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
/* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
may be needed. */
target_mourn_inferior ();
- print_stop_reason (SIGNAL_EXITED, stop_signal);
- singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P() */
+ print_stop_reason (SIGNAL_EXITED, ecs->ws.value.sig);
+ singlestep_breakpoints_inserted_p = 0;
stop_stepping (ecs);
return;
case TARGET_WAITKIND_VFORKED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
- stop_signal = TARGET_SIGNAL_TRAP;
pending_follow.kind = ecs->ws.kind;
- pending_follow.fork_event.parent_pid = PIDGET (ecs->ptid);
+ pending_follow.fork_event.parent_pid = ecs->ptid;
pending_follow.fork_event.child_pid = ecs->ws.value.related_pid;
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
- context_switch (ecs);
+ context_switch (ecs->ptid);
reinit_frame_cache ();
}
stop_pc = read_pc ();
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
+ ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
- ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
+ ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
- stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
keep_going (ecs);
return;
}
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
- stop_signal = TARGET_SIGNAL_TRAP;
-
- /* NOTE drow/2002-12-05: This code should be pushed down into the
- target_wait function. Until then following vfork on HP/UX 10.20
- is probably broken by this. Of course, it's broken anyway. */
- /* Is this a target which reports multiple exec events per actual
- call to exec()? (HP-UX using ptrace does, for example.) If so,
- ignore all but the last one. Just resume the exec'r, and wait
- for the next exec event. */
- if (inferior_ignoring_leading_exec_events)
- {
- inferior_ignoring_leading_exec_events--;
- target_resume (ecs->ptid, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
- inferior_ignoring_leading_exec_events =
- target_reported_exec_events_per_exec_call () - 1;
-
pending_follow.execd_pathname =
savestring (ecs->ws.value.execd_pathname,
strlen (ecs->ws.value.execd_pathname));
/* This causes the eventpoints and symbol table to be reset. Must
do this now, before trying to determine whether to stop. */
- follow_exec (PIDGET (inferior_ptid), pending_follow.execd_pathname);
+ follow_exec (inferior_ptid, pending_follow.execd_pathname);
xfree (pending_follow.execd_pathname);
- stop_pc = read_pc_pid (ecs->ptid);
- ecs->saved_inferior_ptid = inferior_ptid;
- inferior_ptid = ecs->ptid;
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
+
+ {
+ /* The breakpoints module may need to touch the inferior's
+ memory. Switch to the (stopped) event ptid
+ momentarily. */
+ ptid_t saved_inferior_ptid = inferior_ptid;
+ inferior_ptid = ecs->ptid;
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid, 0);
+ ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
- ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
- inferior_ptid = ecs->saved_inferior_ptid;
+ ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
+ inferior_ptid = saved_inferior_ptid;
+ }
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
- context_switch (ecs);
+ context_switch (ecs->ptid);
reinit_frame_cache ();
}
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
- stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
keep_going (ecs);
return;
}
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
goto process_event_stop_test;
/* Be careful not to try to gather much state about a thread
case TARGET_WAITKIND_STOPPED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
- stop_signal = ecs->ws.value.sig;
+ ecs->event_thread->stop_signal = ecs->ws.value.sig;
break;
/* We had an event in the inferior, but we are not interested
return;
}
- /* We may want to consider not doing a resume here in order to give
- the user a chance to play with the new thread. It might be good
- to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens automatically in
- either the OS or the native code). Therefore we need to continue
- all threads in order to make progress. */
if (ecs->new_thread_event)
{
+ if (non_stop)
+ /* Non-stop assumes that the target handles adding new threads
+ to the thread list. */
+ internal_error (__FILE__, __LINE__, "\
+targets should add new threads to the thread list themselves in non-stop mode.");
+
+ /* We may want to consider not doing a resume here in order to
+ give the user a chance to play with the new thread. It might
+ be good to make that a user-settable option. */
+
+ /* At this point, all threads are stopped (happens automatically
+ in either the OS or the native code). Therefore we need to
+ continue all threads in order to make progress. */
+
target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
- stop_pc = read_pc_pid (ecs->ptid);
+ /* Do we need to clean up the state of a thread that has completed a
+ displaced single-step? (Doing so usually affects the PC, so do
+ it here, before we set stop_pc.) */
+ if (ecs->ws.kind == TARGET_WAITKIND_STOPPED)
+ displaced_step_fixup (ecs->ptid, ecs->event_thread->stop_signal);
+
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
+ {
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n",
+ paddr_nz (stop_pc));
+ if (STOPPED_BY_WATCHPOINT (&ecs->ws))
+ {
+ CORE_ADDR addr;
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped by watchpoint\n");
+
+ if (target_stopped_data_address (¤t_target, &addr))
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stopped data address = 0x%s\n",
+ paddr_nz (addr));
+ else
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: (no data address available)\n");
+ }
+ }
if (stepping_past_singlestep_breakpoint)
{
- gdb_assert (SOFTWARE_SINGLE_STEP_P ()
- && singlestep_breakpoints_inserted_p);
+ gdb_assert (singlestep_breakpoints_inserted_p);
gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
/* We've either finished single-stepping past the single-step
breakpoint, or stopped for some other reason. It would be nice if
we could tell, but we can't reliably. */
- if (stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
ecs->random_signal = 0;
- ecs->ptid = saved_singlestep_ptid;
- context_switch (ecs);
+ context_switch (saved_singlestep_ptid);
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
stepping_past_singlestep_breakpoint = 0;
+ if (!ptid_equal (deferred_step_ptid, null_ptid))
+ {
+ /* In non-stop mode, there's never a deferred_step_ptid set. */
+ gdb_assert (!non_stop);
+
+ /* If we stopped for some other reason than single-stepping, ignore
+ the fact that we were supposed to switch back. */
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
+ {
+ struct thread_info *tp;
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: handling deferred step\n");
+
+ /* Pull the single step breakpoints out of the target. */
+ if (singlestep_breakpoints_inserted_p)
+ {
+ remove_single_step_breakpoints ();
+ singlestep_breakpoints_inserted_p = 0;
+ }
+
+ /* Note: We do not call context_switch at this point, as the
+ context is already set up for stepping the original thread. */
+ switch_to_thread (deferred_step_ptid);
+ deferred_step_ptid = null_ptid;
+ /* Suppress spurious "Switching to ..." message. */
+ previous_inferior_ptid = inferior_ptid;
+
+ resume (1, TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
+ }
+
+ deferred_step_ptid = null_ptid;
+ }
+
/* See if a thread hit a thread-specific breakpoint that was meant for
another thread. If so, then step that thread past the breakpoint,
and continue it. */
- if (stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
{
int thread_hop_needed = 0;
/* Check if a regular breakpoint has been hit before checking
for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
- if (breakpoints_inserted && breakpoint_here_p (stop_pc))
+ if (regular_breakpoint_inserted_here_p (stop_pc))
{
ecs->random_signal = 0;
if (!breakpoint_thread_match (stop_pc, ecs->ptid))
thread_hop_needed = 1;
}
- else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ else if (singlestep_breakpoints_inserted_p)
{
/* We have not context switched yet, so this should be true
no matter which thread hit the singlestep breakpoint. */
when they stop, or to re-poll the remote looking for
this particular thread (i.e. temporarily enable
schedlock). */
- if (read_pc_pid (singlestep_ptid) != singlestep_pc)
+
+ CORE_ADDR new_singlestep_pc
+ = regcache_read_pc (get_thread_regcache (singlestep_ptid));
+
+ if (new_singlestep_pc != singlestep_pc)
{
+ enum target_signal stop_signal;
+
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
" but expected thread advanced also\n");
singlestep_ptid. Don't swap here, since that's
the context we want to use. Just fudge our
state and continue. */
+ stop_signal = ecs->event_thread->stop_signal;
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
ecs->ptid = singlestep_ptid;
- stop_pc = read_pc_pid (ecs->ptid);
+ ecs->event_thread = find_thread_pid (ecs->ptid);
+ ecs->event_thread->stop_signal = stop_signal;
+ stop_pc = new_singlestep_pc;
}
else
{
if (thread_hop_needed)
{
- int remove_status;
+ int remove_status = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
/* Saw a breakpoint, but it was hit by the wrong thread.
Just continue. */
- if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ if (singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
- remove_status = remove_breakpoints ();
+ /* If the arch can displace step, don't remove the
+ breakpoints. */
+ if (!use_displaced_stepping (current_gdbarch))
+ remove_status = remove_breakpoints ();
+
/* Did we fail to remove breakpoints? If so, try
to set the PC past the bp. (There's at least
one situation in which we can fail to remove
process until the child exits (well, okay, not
then either :-) or execs. */
if (remove_status != 0)
- {
- /* FIXME! This is obviously non-portable! */
- write_pc_pid (stop_pc + 4, ecs->ptid);
- /* We need to restart all the threads now,
- * unles we're running in scheduler-locked mode.
- * Use currently_stepping to determine whether to
- * step or continue.
- */
- /* FIXME MVS: is there any reason not to call resume()? */
- if (scheduler_mode == schedlock_on)
- target_resume (ecs->ptid,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- else
- target_resume (RESUME_ALL,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
+ error (_("Cannot step over breakpoint hit in wrong thread"));
else
{ /* Single step */
- breakpoints_inserted = 0;
if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs);
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->ws);
- ecs->another_trap = 1;
+ context_switch (ecs->ptid);
+
+ if (!non_stop)
+ {
+ /* Only need to require the next event from this
+ thread in all-stop mode. */
+ waiton_ptid = ecs->ptid;
+ infwait_state = infwait_thread_hop_state;
+ }
- ecs->infwait_state = infwait_thread_hop_state;
+ ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
registers_changed ();
return;
}
}
- else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ else if (singlestep_breakpoints_inserted_p)
{
sw_single_step_trap_p = 1;
ecs->random_signal = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
- context_switch (ecs);
+ context_switch (ecs->ptid);
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
}
- if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ if (singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
+ remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
- /* It may not be necessary to disable the watchpoint to stop over
- it. For example, the PA can (with some kernel cooperation)
- single step over a watchpoint without disabling the watchpoint. */
- if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
- resume (1, 0);
- prepare_to_wait (ecs);
- return;
- }
+ if (stepped_after_stopped_by_watchpoint)
+ stopped_by_watchpoint = 0;
+ else
+ stopped_by_watchpoint = watchpoints_triggered (&ecs->ws);
- /* It is far more common to need to disable a watchpoint to step
- the inferior over it. FIXME. What else might a debug
- register or page protection watchpoint scheme need here? */
- if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
+ /* If necessary, step over this watchpoint. We'll be back to display
+ it in a moment. */
+ if (stopped_by_watchpoint
+ && (HAVE_STEPPABLE_WATCHPOINT
+ || gdbarch_have_nonsteppable_watchpoint (current_gdbarch)))
{
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
In order to make watchpoints work `right', we really need
to complete the memory write, and then evaluate the
- watchpoint expression. The following code does that by
- removing the watchpoint (actually, all watchpoints and
- breakpoints), single-stepping the target, re-inserting
- watchpoints, and then falling through to let normal
- single-step processing handle proceed. Since this
- includes evaluating watchpoints, things will come to a
- stop in the correct manner. */
-
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
- remove_breakpoints ();
+ watchpoint expression. We do this by single-stepping the
+ target.
+
+ It may not be necessary to disable the watchpoint to stop over
+ it. For example, the PA can (with some kernel cooperation)
+ single step over a watchpoint without disabling the watchpoint.
+
+ It is far more common to need to disable a watchpoint to step
+ the inferior over it. If we have non-steppable watchpoints,
+ we must disable the current watchpoint; it's simplest to
+ disable all watchpoints and breakpoints. */
+
+ if (!HAVE_STEPPABLE_WATCHPOINT)
+ remove_breakpoints ();
registers_changed ();
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
-
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->ws);
- ecs->infwait_state = infwait_nonstep_watch_state;
+ waiton_ptid = ecs->ptid;
+ if (HAVE_STEPPABLE_WATCHPOINT)
+ infwait_state = infwait_step_watch_state;
+ else
+ infwait_state = infwait_nonstep_watch_state;
prepare_to_wait (ecs);
return;
}
- /* It may be possible to simply continue after a watchpoint. */
- if (HAVE_CONTINUABLE_WATCHPOINT)
- stopped_by_watchpoint = STOPPED_BY_WATCHPOINT (ecs->ws);
-
ecs->stop_func_start = 0;
ecs->stop_func_end = 0;
ecs->stop_func_name = 0;
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
- ecs->stop_func_start += DEPRECATED_FUNCTION_START_OFFSET;
- ecs->another_trap = 0;
- bpstat_clear (&stop_bpstat);
- stop_step = 0;
- stop_stack_dummy = 0;
+ ecs->stop_func_start
+ += gdbarch_deprecated_function_start_offset (current_gdbarch);
+ ecs->event_thread->stepping_over_breakpoint = 0;
+ bpstat_clear (&ecs->event_thread->stop_bpstat);
+ ecs->event_thread->stop_step = 0;
stop_print_frame = 1;
ecs->random_signal = 0;
stopped_by_random_signal = 0;
- if (stop_signal == TARGET_SIGNAL_TRAP
- && trap_expected
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
+ && ecs->event_thread->trap_expected
&& gdbarch_single_step_through_delay_p (current_gdbarch)
- && currently_stepping (ecs))
+ && currently_stepping (ecs->event_thread))
{
- /* We're trying to step of a breakpoint. Turns out that we're
+ /* We're trying to step off a breakpoint. Turns out that we're
also on an instruction that needs to be stepped multiple
times before it's been fully executing. E.g., architectures
with a delay slot. It needs to be stepped twice, once for
get_current_frame ());
if (debug_infrun && step_through_delay)
fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
- if (step_range_end == 0 && step_through_delay)
+ if (ecs->event_thread->step_range_end == 0 && step_through_delay)
{
/* The user issued a continue when stopped at a breakpoint.
Set up for another trap and get out of here. */
- ecs->another_trap = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
/* The user issued a step when stopped at a breakpoint.
Maybe we should stop, maybe we should not - the delay
slot *might* correspond to a line of source. In any
- case, don't decide that here, just set ecs->another_trap,
- making sure we single-step again before breakpoints are
- re-inserted. */
- ecs->another_trap = 1;
+ case, don't decide that here, just set
+ ecs->stepping_over_breakpoint, making sure we
+ single-step again before breakpoints are re-inserted. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
}
}
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
- 1) break; to really stop and return to the debugger,
- 2) drop through to start up again
- (set ecs->another_trap to 1 to single step once)
+ 1) stop_stepping and return; to really stop and return to the debugger,
+ 2) keep_going and return to start up again
+ (set ecs->event_thread->stepping_over_breakpoint to 1 to single step once)
3) set ecs->random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
when we're trying to execute a breakpoint instruction on a
non-executable stack. This happens for call dummy breakpoints
for architectures like SPARC that place call dummies on the
- stack. */
-
- if (stop_signal == TARGET_SIGNAL_TRAP
- || (breakpoints_inserted
- && (stop_signal == TARGET_SIGNAL_ILL
- || stop_signal == TARGET_SIGNAL_SEGV
- || stop_signal == TARGET_SIGNAL_EMT))
- || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ stack.
+
+ If we're doing a displaced step past a breakpoint, then the
+ breakpoint is always inserted at the original instruction;
+ non-standard signals can't be explained by the breakpoint. */
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
+ || (! ecs->event_thread->trap_expected
+ && breakpoint_inserted_here_p (stop_pc)
+ && (ecs->event_thread->stop_signal == TARGET_SIGNAL_ILL
+ || ecs->event_thread->stop_signal == TARGET_SIGNAL_SEGV
+ || ecs->event_thread->stop_signal == TARGET_SIGNAL_EMT))
+ || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP
+ || stop_soon == STOP_QUIETLY_REMOTE)
{
- if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
/* This is originated from start_remote(), start_inferior() and
shared libraries hook functions. */
- if (stop_soon == STOP_QUIETLY)
+ if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
}
/* This originates from attach_command(). We need to overwrite
- the stop_signal here, because some kernels don't ignore a
- SIGSTOP in a subsequent ptrace(PTRACE_SONT,SOGSTOP) call.
- See more comments in inferior.h. */
- if (stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ the stop_signal here, because some kernels don't ignore a
+ SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
+ See more comments in inferior.h. On the other hand, if we
+ get a non-SIGSTOP, report it to the user - assume the backend
+ will handle the SIGSTOP if it should show up later.
+
+ Also consider that the attach is complete when we see a
+ SIGTRAP. Some systems (e.g. Windows), and stubs supporting
+ target extended-remote report it instead of a SIGSTOP
+ (e.g. gdbserver). We already rely on SIGTRAP being our
+ signal, so this is no exception. */
+ if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
+ && (ecs->event_thread->stop_signal == TARGET_SIGNAL_STOP
+ || ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP))
{
stop_stepping (ecs);
- if (stop_signal == TARGET_SIGNAL_STOP)
- stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
return;
}
- /* Don't even think about breakpoints if just proceeded over a
- breakpoint. */
- if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: trap expected\n");
- bpstat_clear (&stop_bpstat);
- }
- else
- {
- /* See if there is a breakpoint at the current PC. */
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
- stopped_by_watchpoint);
-
- /* Following in case break condition called a
- function. */
- stop_print_frame = 1;
- }
+ /* See if there is a breakpoint at the current PC. */
+ ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
+
+ /* Following in case break condition called a
+ function. */
+ stop_print_frame = 1;
/* NOTE: cagney/2003-03-29: These two checks for a random signal
at one stage in the past included checks for an inferior
be necessary for call dummies on a non-executable stack on
SPARC. */
- if (stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
- = !(bpstat_explains_signal (stop_bpstat)
- || trap_expected
- || (step_range_end && step_resume_breakpoint == NULL));
+ = !(bpstat_explains_signal (ecs->event_thread->stop_bpstat)
+ || ecs->event_thread->trap_expected
+ || (ecs->event_thread->step_range_end
+ && ecs->event_thread->step_resume_breakpoint == NULL));
else
{
- ecs->random_signal = !bpstat_explains_signal (stop_bpstat);
+ ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
if (!ecs->random_signal)
- stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
}
}
int printed = 0;
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal);
+ fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n",
+ ecs->event_thread->stop_signal);
stopped_by_random_signal = 1;
- if (signal_print[stop_signal])
+ if (signal_print[ecs->event_thread->stop_signal])
{
printed = 1;
target_terminal_ours_for_output ();
- print_stop_reason (SIGNAL_RECEIVED, stop_signal);
+ print_stop_reason (SIGNAL_RECEIVED, ecs->event_thread->stop_signal);
}
- if (signal_stop[stop_signal])
+ if (signal_stop_state (ecs->event_thread->stop_signal))
{
stop_stepping (ecs);
return;
target_terminal_inferior ();
/* Clear the signal if it should not be passed. */
- if (signal_program[stop_signal] == 0)
- stop_signal = TARGET_SIGNAL_0;
+ if (signal_program[ecs->event_thread->stop_signal] == 0)
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
- if (prev_pc == read_pc ()
- && !breakpoints_inserted
- && breakpoint_here_p (read_pc ())
- && step_resume_breakpoint == NULL)
+ if (ecs->event_thread->prev_pc == read_pc ()
+ && ecs->event_thread->trap_expected
+ && ecs->event_thread->step_resume_breakpoint == NULL)
{
/* We were just starting a new sequence, attempting to
single-step off of a breakpoint and expecting a SIGTRAP.
- Intead this signal arrives. This signal will take us out
+ Instead this signal arrives. This signal will take us out
of the stepping range so GDB needs to remember to, when
the signal handler returns, resume stepping off that
breakpoint. */
code paths as single-step - set a breakpoint at the
signal return address and then, once hit, step off that
breakpoint. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: signal arrived while stepping over "
+ "breakpoint\n");
+
insert_step_resume_breakpoint_at_frame (get_current_frame ());
- ecs->step_after_step_resume_breakpoint = 1;
+ ecs->event_thread->step_after_step_resume_breakpoint = 1;
keep_going (ecs);
return;
}
- if (step_range_end != 0
- && stop_signal != TARGET_SIGNAL_0
- && stop_pc >= step_range_start && stop_pc < step_range_end
+ if (ecs->event_thread->step_range_end != 0
+ && ecs->event_thread->stop_signal != TARGET_SIGNAL_0
+ && (ecs->event_thread->step_range_start <= stop_pc
+ && stop_pc < ecs->event_thread->step_range_end)
&& frame_id_eq (get_frame_id (get_current_frame ()),
- step_frame_id)
- && step_resume_breakpoint == NULL)
+ ecs->event_thread->step_frame_id)
+ && ecs->event_thread->step_resume_breakpoint == NULL)
{
/* The inferior is about to take a signal that will take it
out of the single step range. Set a breakpoint at the
Note that this is only needed for a signal delivered
while in the single-step range. Nested signals aren't a
problem as they eventually all return. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: signal may take us out of "
+ "single-step range\n");
+
insert_step_resume_breakpoint_at_frame (get_current_frame ());
keep_going (ecs);
return;
CORE_ADDR jmp_buf_pc;
struct bpstat_what what;
- what = bpstat_what (stop_bpstat);
+ what = bpstat_what (ecs->event_thread->stop_bpstat);
if (what.call_dummy)
{
switch (what.main_action)
{
case BPSTAT_WHAT_SET_LONGJMP_RESUME:
- /* If we hit the breakpoint at longjmp, disable it for the
- duration of this command. Then, install a temporary
- breakpoint at the target of the jmp_buf. */
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
- disable_longjmp_breakpoint ();
- remove_breakpoints ();
- breakpoints_inserted = 0;
- if (!GET_LONGJMP_TARGET_P () || !GET_LONGJMP_TARGET (&jmp_buf_pc))
+ /* If we hit the breakpoint at longjmp while stepping, we
+ install a momentary breakpoint at the target of the
+ jmp_buf. */
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
+
+ ecs->event_thread->stepping_over_breakpoint = 1;
+
+ if (!gdbarch_get_longjmp_target_p (current_gdbarch)
+ || !gdbarch_get_longjmp_target (current_gdbarch,
+ get_current_frame (), &jmp_buf_pc))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "\
+infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target)\n");
keep_going (ecs);
return;
}
- /* Need to blow away step-resume breakpoint, as it
- interferes with us */
- if (step_resume_breakpoint != NULL)
- {
- delete_step_resume_breakpoint (&step_resume_breakpoint);
- }
+ /* We're going to replace the current step-resume breakpoint
+ with a longjmp-resume breakpoint. */
+ delete_step_resume_breakpoint (ecs->event_thread);
+
+ /* Insert a breakpoint at resume address. */
+ insert_longjmp_resume_breakpoint (jmp_buf_pc);
- set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
- ecs->handling_longjmp = 1; /* FIXME */
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
- case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
- remove_breakpoints ();
- breakpoints_inserted = 0;
- disable_longjmp_breakpoint ();
- ecs->handling_longjmp = 0; /* FIXME */
- if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
- break;
- /* else fallthrough */
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
+
+ gdb_assert (ecs->event_thread->step_resume_breakpoint != NULL);
+ delete_step_resume_breakpoint (ecs->event_thread);
+
+ ecs->event_thread->stop_step = 1;
+ print_stop_reason (END_STEPPING_RANGE, 0);
+ stop_stepping (ecs);
+ return;
case BPSTAT_WHAT_SINGLE:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
- if (breakpoints_inserted)
- remove_breakpoints ();
- breakpoints_inserted = 0;
- ecs->another_trap = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
/* Still need to check other stuff, at least the case
where we are stepping and step out of the right range. */
break;
return;
case BPSTAT_WHAT_STEP_RESUME:
- /* This proably demands a more elegant solution, but, yeah
- right...
-
- This function's use of the simple variable
- step_resume_breakpoint doesn't seem to accomodate
- simultaneously active step-resume bp's, although the
- breakpoint list certainly can.
-
- If we reach here and step_resume_breakpoint is already
- NULL, then apparently we have multiple active
- step-resume bp's. We'll just delete the breakpoint we
- stopped at, and carry on.
-
- Correction: what the code currently does is delete a
- step-resume bp, but it makes no effort to ensure that
- the one deleted is the one currently stopped at. MVS */
-
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
- if (step_resume_breakpoint == NULL)
- {
- step_resume_breakpoint =
- bpstat_find_step_resume_breakpoint (stop_bpstat);
- }
- delete_step_resume_breakpoint (&step_resume_breakpoint);
- if (ecs->step_after_step_resume_breakpoint)
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->step_after_step_resume_breakpoint)
{
/* Back when the step-resume breakpoint was inserted, we
were trying to single-step off a breakpoint. Go back
to doing that. */
- ecs->step_after_step_resume_breakpoint = 0;
- remove_breakpoints ();
- breakpoints_inserted = 0;
- ecs->another_trap = 1;
+ ecs->event_thread->step_after_step_resume_breakpoint = 0;
+ ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
break;
- case BPSTAT_WHAT_THROUGH_SIGTRAMP:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_THROUGH_SIGTRAMP\n");
- /* If were waiting for a trap, hitting the step_resume_break
- doesn't count as getting it. */
- if (trap_expected)
- ecs->another_trap = 1;
- break;
-
case BPSTAT_WHAT_CHECK_SHLIBS:
case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
- /* Remove breakpoints, we eventually want to step over the
- shlib event breakpoint, and SOLIB_ADD might adjust
- breakpoint addresses via breakpoint_re_set. */
- if (breakpoints_inserted)
- remove_breakpoints ();
- breakpoints_inserted = 0;
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
#endif
target_terminal_inferior ();
- /* Try to reenable shared library breakpoints, additional
- code segments in shared libraries might be mapped in now. */
- re_enable_breakpoints_in_shlibs ();
-
/* If requested, stop when the dynamic linker notifies
gdb of events. This allows the user to get control
and place breakpoints in initializer routines for
code or stubs in libdld.sl, such as "shl_load" and
friends) until we reach non-dld code. At that point,
we can stop stepping. */
- bpstat_get_triggered_catchpoints (stop_bpstat,
+ bpstat_get_triggered_catchpoints (ecs->event_thread->stop_bpstat,
&ecs->
+ event_thread->
stepping_through_solib_catchpoints);
- ecs->stepping_through_solib_after_catch = 1;
+ ecs->event_thread->stepping_through_solib_after_catch = 1;
/* Be sure to lift all breakpoints, so the inferior does
actually step past this point... */
- ecs->another_trap = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
break;
}
else
{
/* We want to step over this breakpoint, then keep going. */
- ecs->another_trap = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
break;
}
}
/* Are we stepping to get the inferior out of the dynamic linker's
hook (and possibly the dld itself) after catching a shlib
event? */
- if (ecs->stepping_through_solib_after_catch)
+ if (ecs->event_thread->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
/* Have we reached our destination? If not, keep going. */
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
- ecs->another_trap = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
caused us to begin stepping. */
- ecs->stepping_through_solib_after_catch = 0;
- bpstat_clear (&stop_bpstat);
- stop_bpstat = bpstat_copy (ecs->stepping_through_solib_catchpoints);
- bpstat_clear (&ecs->stepping_through_solib_catchpoints);
+ ecs->event_thread->stepping_through_solib_after_catch = 0;
+ bpstat_clear (&ecs->event_thread->stop_bpstat);
+ ecs->event_thread->stop_bpstat
+ = bpstat_copy (ecs->event_thread->stepping_through_solib_catchpoints);
+ bpstat_clear (&ecs->event_thread->stepping_through_solib_catchpoints);
stop_print_frame = 1;
stop_stepping (ecs);
return;
}
- if (step_resume_breakpoint)
+ if (ecs->event_thread->step_resume_breakpoint)
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: step-resume breakpoint\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: step-resume breakpoint is inserted\n");
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
return;
}
- if (step_range_end == 0)
+ if (ecs->event_thread->step_range_end == 0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
Note that step_range_end is the address of the first instruction
beyond the step range, and NOT the address of the last instruction
within it! */
- if (stop_pc >= step_range_start && stop_pc < step_range_end)
+ if (stop_pc >= ecs->event_thread->step_range_start
+ && stop_pc < ecs->event_thread->step_range_end)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
- paddr_nz (step_range_start),
- paddr_nz (step_range_end));
+ paddr_nz (ecs->event_thread->step_range_start),
+ paddr_nz (ecs->event_thread->step_range_end));
keep_going (ecs);
return;
}
loader dynamic symbol resolution code, we keep on single stepping
until we exit the run time loader code and reach the callee's
address. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE
-#ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
- && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)
-#else
- && in_solib_dynsym_resolve_code (stop_pc)
-#endif
- )
+ if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
+ && in_solib_dynsym_resolve_code (stop_pc))
{
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
return;
}
- if (step_range_end != 1
- && (step_over_calls == STEP_OVER_UNDEBUGGABLE
- || step_over_calls == STEP_OVER_ALL)
+ if (ecs->event_thread->step_range_end != 1
+ && (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
+ || ecs->event_thread->step_over_calls == STEP_OVER_ALL)
&& get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
if (debug_infrun)
NOTE: frame_id_eq will never report two invalid frame IDs as
being equal, so to get into this block, both the current and
previous frame must have valid frame IDs. */
- if (!frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id)
- && frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
+ if (!frame_id_eq (get_frame_id (get_current_frame ()),
+ ecs->event_thread->step_frame_id)
+ && frame_id_eq (frame_unwind_id (get_current_frame ()),
+ ecs->event_thread->step_frame_id))
{
CORE_ADDR real_stop_pc;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
- if ((step_over_calls == STEP_OVER_NONE)
- || ((step_range_end == 1)
- && in_prologue (prev_pc, ecs->stop_func_start)))
+ if ((ecs->event_thread->step_over_calls == STEP_OVER_NONE)
+ || ((ecs->event_thread->step_range_end == 1)
+ && in_prologue (ecs->event_thread->prev_pc,
+ ecs->stop_func_start)))
{
/* I presume that step_over_calls is only 0 when we're
supposed to be stepping at the assembly language level
/* Also, maybe we just did a "nexti" inside a prolog, so we
thought it was a subroutine call but it was not. Stop as
well. FENN */
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
- if (step_over_calls == STEP_OVER_ALL)
+ if (ecs->event_thread->step_over_calls == STEP_OVER_ALL)
{
/* We're doing a "next", set a breakpoint at callee's return
address (the address at which the caller will
function. That's what tells us (a) whether we want to step
into it at all, and (b) what prologue we want to run to the
end of, if we do step into it. */
- real_stop_pc = skip_language_trampoline (stop_pc);
+ real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc);
if (real_stop_pc == 0)
- real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
- if (
-#ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE
- IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start)
-#else
- in_solib_dynsym_resolve_code (ecs->stop_func_start)
-#endif
-)
+ if (in_solib_dynsym_resolve_code (ecs->stop_func_start))
{
struct symtab_and_line sr_sal;
init_sal (&sr_sal);
/* If we have no line number and the step-stop-if-no-debug is
set, we stop the step so that the user has a chance to switch
in assembly mode. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
+ if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
+ && step_stop_if_no_debug)
{
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
/* If we're in the return path from a shared library trampoline,
we want to proceed through the trampoline when stepping. */
- if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
+ if (gdbarch_in_solib_return_trampoline (current_gdbarch,
+ stop_pc, ecs->stop_func_name))
{
/* Determine where this trampoline returns. */
- CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ CORE_ADDR real_stop_pc;
+ real_stop_pc = gdbarch_skip_trampoline_code
+ (current_gdbarch, get_current_frame (), stop_pc);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
}
}
- ecs->sal = find_pc_line (stop_pc, 0);
+ stop_pc_sal = find_pc_line (stop_pc, 0);
/* NOTE: tausq/2004-05-24: This if block used to be done before all
the trampoline processing logic, however, there are some trampolines
that have no names, so we should do trampoline handling first. */
- if (step_over_calls == STEP_OVER_UNDEBUGGABLE
+ if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
&& ecs->stop_func_name == NULL
- && ecs->sal.line == 0)
+ && stop_pc_sal.line == 0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
/* If we have no line number and the step-stop-if-no-debug
is set, we stop the step so that the user has a chance to
switch in assembly mode. */
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
}
- if (step_range_end == 1)
+ if (ecs->event_thread->step_range_end == 1)
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
- if (ecs->sal.line == 0)
+ if (stop_pc_sal.line == 0)
{
/* We have no line number information. That means to stop
stepping (does this always happen right after one instruction,
or can this happen as a result of a return or longjmp?). */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
- if ((stop_pc == ecs->sal.pc)
- && (ecs->current_line != ecs->sal.line
- || ecs->current_symtab != ecs->sal.symtab))
+ if ((stop_pc == stop_pc_sal.pc)
+ && (ecs->event_thread->current_line != stop_pc_sal.line
+ || ecs->event_thread->current_symtab != stop_pc_sal.symtab))
{
/* We are at the start of a different line. So stop. Note that
we don't stop if we step into the middle of a different line.
better. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
new line in mid-statement, we continue stepping. This makes
things like for(;;) statements work better.) */
- if (ecs->stop_func_end && ecs->sal.end >= ecs->stop_func_end)
- {
- /* If this is the last line of the function, don't keep stepping
- (it would probably step us out of the function).
- This is particularly necessary for a one-line function,
- in which after skipping the prologue we better stop even though
- we will be in mid-line. */
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different function\n");
- stop_step = 1;
- print_stop_reason (END_STEPPING_RANGE, 0);
- stop_stepping (ecs);
- return;
- }
- step_range_start = ecs->sal.pc;
- step_range_end = ecs->sal.end;
- step_frame_id = get_frame_id (get_current_frame ());
- ecs->current_line = ecs->sal.line;
- ecs->current_symtab = ecs->sal.symtab;
-
- /* In the case where we just stepped out of a function into the
- middle of a line of the caller, continue stepping, but
- step_frame_id must be modified to current frame */
-#if 0
- /* NOTE: cagney/2003-10-16: I think this frame ID inner test is too
- generous. It will trigger on things like a step into a frameless
- stackless leaf function. I think the logic should instead look
- at the unwound frame ID has that should give a more robust
- indication of what happened. */
- if (step - ID == current - ID)
- still stepping in same function;
- else if (step - ID == unwind (current - ID))
- stepped into a function;
- else
- stepped out of a function;
- /* Of course this assumes that the frame ID unwind code is robust
- and we're willing to introduce frame unwind logic into this
- function. Fortunately, those days are nearly upon us. */
-#endif
- {
- struct frame_id current_frame = get_frame_id (get_current_frame ());
- if (!(frame_id_inner (current_frame, step_frame_id)))
- step_frame_id = current_frame;
- }
+ ecs->event_thread->step_range_start = stop_pc_sal.pc;
+ ecs->event_thread->step_range_end = stop_pc_sal.end;
+ ecs->event_thread->step_frame_id = get_frame_id (get_current_frame ());
+ ecs->event_thread->current_line = stop_pc_sal.line;
+ ecs->event_thread->current_symtab = stop_pc_sal.symtab;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
/* Are we in the middle of stepping? */
static int
-currently_stepping (struct execution_control_state *ecs)
+currently_stepping (struct thread_info *tp)
{
- return ((!ecs->handling_longjmp
- && ((step_range_end && step_resume_breakpoint == NULL)
- || trap_expected))
- || ecs->stepping_through_solib_after_catch
+ return (((tp->step_range_end && tp->step_resume_breakpoint == NULL)
+ || tp->trap_expected)
+ || tp->stepping_through_solib_after_catch
|| bpstat_should_step ());
}
step_into_function (struct execution_control_state *ecs)
{
struct symtab *s;
- struct symtab_and_line sr_sal;
+ struct symtab_and_line stop_func_sal, sr_sal;
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
- ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start);
+ ecs->stop_func_start = gdbarch_skip_prologue
+ (current_gdbarch, ecs->stop_func_start);
- ecs->sal = find_pc_line (ecs->stop_func_start, 0);
+ stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
even if that involves jumps (as it seems to on the vax under
4.2). */
/* If the prologue ends in the middle of a source line, continue to
the end of that source line (if it is still within the function).
Otherwise, just go to end of prologue. */
- if (ecs->sal.end
- && ecs->sal.pc != ecs->stop_func_start
- && ecs->sal.end < ecs->stop_func_end)
- ecs->stop_func_start = ecs->sal.end;
+ if (stop_func_sal.end
+ && stop_func_sal.pc != ecs->stop_func_start
+ && stop_func_sal.end < ecs->stop_func_end)
+ ecs->stop_func_start = stop_func_sal.end;
/* Architectures which require breakpoint adjustment might not be able
to place a breakpoint at the computed address. If so, the test
if (ecs->stop_func_start == stop_pc)
{
/* We are already there: stop now. */
- stop_step = 1;
+ ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* And make sure stepping stops right away then. */
- step_range_end = step_range_start;
+ ecs->event_thread->step_range_end = ecs->event_thread->step_range_start;
}
keep_going (ecs);
}
-/* Insert a "step resume breakpoint" at SR_SAL with frame ID SR_ID.
+/* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID.
This is used to both functions and to skip over code. */
static void
insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
struct frame_id sr_id)
{
- /* There should never be more than one step-resume breakpoint per
- thread, so we should never be setting a new
+ /* There should never be more than one step-resume or longjmp-resume
+ breakpoint per thread, so we should never be setting a new
step_resume_breakpoint when one is already active. */
- gdb_assert (step_resume_breakpoint == NULL);
- step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
- bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: inserting step-resume breakpoint at 0x%s\n",
+ paddr_nz (sr_sal.pc));
+
+ inferior_thread ()->step_resume_breakpoint
+ = set_momentary_breakpoint (sr_sal, sr_id, bp_step_resume);
}
-/* Insert a "step resume breakpoint" at RETURN_FRAME.pc. This is used
+/* Insert a "step-resume breakpoint" at RETURN_FRAME.pc. This is used
to skip a potential signal handler.
This is called with the interrupted function's frame. The signal
{
struct symtab_and_line sr_sal;
+ gdb_assert (return_frame != NULL);
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (return_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (frame_pc_unwind (next_frame));
+ sr_sal.pc = gdbarch_addr_bits_remove
+ (current_gdbarch, frame_pc_unwind (next_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
}
+/* Insert a "longjmp-resume" breakpoint at PC. This is used to set a
+ new breakpoint at the target of a jmp_buf. The handling of
+ longjmp-resume uses the same mechanisms used for handling
+ "step-resume" breakpoints. */
+
+static void
+insert_longjmp_resume_breakpoint (CORE_ADDR pc)
+{
+ /* There should never be more than one step-resume or longjmp-resume
+ breakpoint per thread, so we should never be setting a new
+ longjmp_resume_breakpoint when one is already active. */
+ gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: inserting longjmp-resume breakpoint at 0x%s\n",
+ paddr_nz (pc));
+
+ inferior_thread ()->step_resume_breakpoint =
+ set_momentary_breakpoint_at_pc (pc, bp_longjmp_resume);
+}
+
static void
stop_stepping (struct execution_control_state *ecs)
{
keep_going (struct execution_control_state *ecs)
{
/* Save the pc before execution, to compare with pc after stop. */
- prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
+ ecs->event_thread->prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
- if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->trap_expected
+ && ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
- the inferior, else we'd have done a break above) and we
- haven't yet gotten our trap. Simply continue. */
- resume (currently_stepping (ecs), stop_signal);
+ the inferior, else we'd not get here) and we haven't yet
+ gotten our trap. Simply continue. */
+ resume (currently_stepping (ecs->event_thread),
+ ecs->event_thread->stop_signal);
}
else
{
The signal was SIGTRAP, e.g. it was our signal, but we
decided we should resume from it.
- We're going to run this baby now! */
+ We're going to run this baby now!
- if (!breakpoints_inserted && !ecs->another_trap)
+ Note that insert_breakpoints won't try to re-insert
+ already inserted breakpoints. Therefore, we don't
+ care if breakpoints were already inserted, or not. */
+
+ if (ecs->event_thread->stepping_over_breakpoint)
+ {
+ if (! use_displaced_stepping (current_gdbarch))
+ /* Since we can't do a displaced step, we have to remove
+ the breakpoint while we step it. To keep things
+ simple, we remove them all. */
+ remove_breakpoints ();
+ }
+ else
{
+ struct gdb_exception e;
/* Stop stepping when inserting breakpoints
has failed. */
- if (insert_breakpoints () != 0)
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ {
+ insert_breakpoints ();
+ }
+ if (e.reason < 0)
{
stop_stepping (ecs);
return;
}
- breakpoints_inserted = 1;
}
- trap_expected = ecs->another_trap;
+ ecs->event_thread->trap_expected = ecs->event_thread->stepping_over_breakpoint;
/* Do not deliver SIGNAL_TRAP (except when the user explicitly
specifies that such a signal should be delivered to the
simulator; the simulator then delivers the hardware
equivalent of a SIGNAL_TRAP to the program being debugged. */
- if (stop_signal == TARGET_SIGNAL_TRAP && !signal_program[stop_signal])
- stop_signal = TARGET_SIGNAL_0;
-
+ if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
+ && !signal_program[ecs->event_thread->stop_signal])
+ ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
- resume (currently_stepping (ecs), stop_signal);
+ resume (currently_stepping (ecs->event_thread),
+ ecs->event_thread->stop_signal);
}
prepare_to_wait (ecs);
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
- if (ecs->infwait_state == infwait_normal_state)
+ if (infwait_state == infwait_normal_state)
{
overlay_cache_invalid = 1;
as part of their normal status mechanism. */
registers_changed ();
- ecs->waiton_ptid = pid_to_ptid (-1);
- ecs->wp = &(ecs->ws);
+ waiton_ptid = pid_to_ptid (-1);
}
/* This is the old end of the while loop. Let everybody know we
want to wait for the inferior some more and get called again
/* For now print nothing. */
/* Print a message only if not in the middle of doing a "step n"
operation for n > 1 */
- if (!step_multi || !stop_step)
+ if (!inferior_thread ()->step_multi
+ || !inferior_thread ()->stop_step)
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
(uiout, "reason",
get_last_target_status (&last_ptid, &last);
+ /* In non-stop mode, we don't want GDB to switch threads behind the
+ user's back, to avoid races where the user is typing a command to
+ apply to thread x, but GDB switches to thread y before the user
+ finishes entering the command. */
+
/* As with the notification of thread events, we want to delay
notifying the user that we've switched thread context until
the inferior actually stops.
There's no point in saying anything if the inferior has exited.
Note that SIGNALLED here means "exited with a signal", not
"received a signal". */
- if (!ptid_equal (previous_inferior_ptid, inferior_ptid)
+ if (!non_stop
+ && !ptid_equal (previous_inferior_ptid, inferior_ptid)
&& target_has_execution
&& last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED)
{
target_terminal_ours_for_output ();
printf_filtered (_("[Switching to %s]\n"),
- target_pid_or_tid_to_str (inferior_ptid));
+ target_pid_to_str (inferior_ptid));
+ annotate_thread_changed ();
previous_inferior_ptid = inferior_ptid;
}
/* NOTE drow/2004-01-17: Is this still necessary? */
/* Make sure that the current_frame's pc is correct. This
is a correction for setting up the frame info before doing
- DECR_PC_AFTER_BREAK */
+ gdbarch_decr_pc_after_break */
if (target_has_execution)
/* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to
- DECR_PC_AFTER_BREAK, the program counter can change. Ask the
+ gdbarch_decr_pc_after_break, the program counter can change. Ask the
frame code to check for this and sort out any resultant mess.
- DECR_PC_AFTER_BREAK needs to just go away. */
+ gdbarch_decr_pc_after_break needs to just go away. */
deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
- if (target_has_execution && breakpoints_inserted)
+ if (!breakpoints_always_inserted_mode () && target_has_execution)
{
if (remove_breakpoints ())
{
Further execution is probably impossible.\n"));
}
}
- breakpoints_inserted = 0;
-
- /* Delete the breakpoint we stopped at, if it wants to be deleted.
- Delete any breakpoint that is to be deleted at the next stop. */
-
- breakpoint_auto_delete (stop_bpstat);
/* If an auto-display called a function and that got a signal,
delete that auto-display to avoid an infinite recursion. */
/* Don't print a message if in the middle of doing a "step n"
operation for n > 1 */
- if (step_multi && stop_step)
+ if (target_has_execution
+ && last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED
+ && inferior_thread ()->step_multi
+ && inferior_thread ()->stop_step)
goto done;
target_terminal_ours ();
if (target_has_stack && !stop_stack_dummy)
set_current_sal_from_frame (get_current_frame (), 1);
- /* Look up the hook_stop and run it (CLI internally handles problem
- of stop_command's pre-hook not existing). */
- if (stop_command)
- catch_errors (hook_stop_stub, stop_command,
- "Error while running hook_stop:\n", RETURN_MASK_ALL);
-
if (!target_has_stack)
- {
+ goto done;
- goto done;
- }
+ if (last.kind == TARGET_WAITKIND_SIGNALLED
+ || last.kind == TARGET_WAITKIND_EXITED)
+ goto done;
/* Select innermost stack frame - i.e., current frame is frame 0,
and current location is based on that.
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
- if (stop_print_frame)
+ /* If --batch-silent is enabled then there's no need to print the current
+ source location, and to try risks causing an error message about
+ missing source files. */
+ if (stop_print_frame && !batch_silent)
{
int bpstat_ret;
int source_flag;
int do_frame_printing = 1;
+ struct thread_info *tp = inferior_thread ();
- bpstat_ret = bpstat_print (stop_bpstat);
+ bpstat_ret = bpstat_print (tp->stop_bpstat);
switch (bpstat_ret)
{
case PRINT_UNKNOWN:
+ /* If we had hit a shared library event breakpoint,
+ bpstat_print would print out this message. If we hit
+ an OS-level shared library event, do the same
+ thing. */
+ if (last.kind == TARGET_WAITKIND_LOADED)
+ {
+ printf_filtered (_("Stopped due to shared library event\n"));
+ source_flag = SRC_LINE; /* something bogus */
+ do_frame_printing = 0;
+ break;
+ }
+
/* FIXME: cagney/2002-12-01: Given that a frame ID does
(or should) carry around the function and does (or
should) use that when doing a frame comparison. */
- if (stop_step
- && frame_id_eq (step_frame_id,
+ if (tp->stop_step
+ && frame_id_eq (tp->step_frame_id,
get_frame_id (get_current_frame ()))
&& step_start_function == find_pc_function (stop_pc))
source_flag = SRC_LINE; /* finished step, just print source line */
}
if (ui_out_is_mi_like_p (uiout))
- ui_out_field_int (uiout, "thread-id",
- pid_to_thread_id (inferior_ptid));
+ {
+
+ ui_out_field_int (uiout, "thread-id",
+ pid_to_thread_id (inferior_ptid));
+ if (non_stop)
+ {
+ struct cleanup *back_to = make_cleanup_ui_out_list_begin_end
+ (uiout, "stopped-threads");
+ ui_out_field_int (uiout, NULL,
+ pid_to_thread_id (inferior_ptid));
+ do_cleanups (back_to);
+ }
+ else
+ ui_out_field_string (uiout, "stopped-threads", "all");
+ }
/* The behavior of this routine with respect to the source
flag is:
SRC_LINE: Print only source line
/* Save the function value return registers, if we care.
We might be about to restore their previous contents. */
- if (proceed_to_finish)
- /* NB: The copy goes through to the target picking up the value of
- all the registers. */
- regcache_cpy (stop_registers, current_regcache);
+ if (inferior_thread ()->proceed_to_finish)
+ {
+ /* This should not be necessary. */
+ if (stop_registers)
+ regcache_xfree (stop_registers);
+
+ /* NB: The copy goes through to the target picking up the value of
+ all the registers. */
+ stop_registers = regcache_dup (get_current_regcache ());
+ }
if (stop_stack_dummy)
{
done:
annotate_stopped ();
- observer_notify_normal_stop (stop_bpstat);
+ if (!suppress_stop_observer
+ && !(target_has_execution
+ && last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED
+ && inferior_thread ()->step_multi))
+ {
+ if (!ptid_equal (inferior_ptid, null_ptid))
+ observer_notify_normal_stop (inferior_thread ()->stop_bpstat);
+ else
+ observer_notify_normal_stop (NULL);
+ }
+ if (target_has_execution
+ && last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED)
+ {
+ /* Delete the breakpoint we stopped at, if it wants to be deleted.
+ Delete any breakpoint that is to be deleted at the next stop. */
+ breakpoint_auto_delete (inferior_thread ()->stop_bpstat);
+
+ if (!non_stop)
+ set_running (pid_to_ptid (-1), 0);
+ else
+ set_running (inferior_ptid, 0);
+ }
+
+ /* Look up the hook_stop and run it (CLI internally handles problem
+ of stop_command's pre-hook not existing). */
+ if (stop_command)
+ catch_errors (hook_stop_stub, stop_command,
+ "Error while running hook_stop:\n", RETURN_MASK_ALL);
+
}
static int
int
signal_stop_state (int signo)
{
- return signal_stop[signo];
+ /* Always stop on signals if we're just gaining control of the
+ program. */
+ return signal_stop[signo] || stop_soon != NO_STOP_QUIETLY;
}
int
int stop_step;
int stop_stack_dummy;
int stopped_by_random_signal;
- int trap_expected;
+ int stepping_over_breakpoint;
CORE_ADDR step_range_start;
CORE_ADDR step_range_end;
struct frame_id step_frame_id;
CORE_ADDR step_resume_break_address;
int stop_after_trap;
int stop_soon;
- struct regcache *stop_registers;
/* These are here because if call_function_by_hand has written some
registers and then decides to call error(), we better not have changed
save_inferior_status (int restore_stack_info)
{
struct inferior_status *inf_status = XMALLOC (struct inferior_status);
+ struct thread_info *tp = inferior_thread ();
- inf_status->stop_signal = stop_signal;
+ inf_status->stop_signal = tp->stop_signal;
inf_status->stop_pc = stop_pc;
- inf_status->stop_step = stop_step;
+ inf_status->stop_step = tp->stop_step;
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
- inf_status->trap_expected = trap_expected;
- inf_status->step_range_start = step_range_start;
- inf_status->step_range_end = step_range_end;
- inf_status->step_frame_id = step_frame_id;
- inf_status->step_over_calls = step_over_calls;
+ inf_status->stepping_over_breakpoint = tp->trap_expected;
+ inf_status->step_range_start = tp->step_range_start;
+ inf_status->step_range_end = tp->step_range_end;
+ inf_status->step_frame_id = tp->step_frame_id;
+ inf_status->step_over_calls = tp->step_over_calls;
inf_status->stop_after_trap = stop_after_trap;
inf_status->stop_soon = stop_soon;
/* Save original bpstat chain here; replace it with copy of chain.
If caller's caller is walking the chain, they'll be happier if we
hand them back the original chain when restore_inferior_status is
called. */
- inf_status->stop_bpstat = stop_bpstat;
- stop_bpstat = bpstat_copy (stop_bpstat);
+ inf_status->stop_bpstat = tp->stop_bpstat;
+ tp->stop_bpstat = bpstat_copy (tp->stop_bpstat);
inf_status->breakpoint_proceeded = breakpoint_proceeded;
inf_status->restore_stack_info = restore_stack_info;
- inf_status->proceed_to_finish = proceed_to_finish;
+ inf_status->proceed_to_finish = tp->proceed_to_finish;
- inf_status->stop_registers = regcache_dup_no_passthrough (stop_registers);
-
- inf_status->registers = regcache_dup (current_regcache);
+ inf_status->registers = regcache_dup (get_current_regcache ());
inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
return inf_status;
void
restore_inferior_status (struct inferior_status *inf_status)
{
- stop_signal = inf_status->stop_signal;
+ struct thread_info *tp = inferior_thread ();
+
+ tp->stop_signal = inf_status->stop_signal;
stop_pc = inf_status->stop_pc;
- stop_step = inf_status->stop_step;
+ tp->stop_step = inf_status->stop_step;
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
- trap_expected = inf_status->trap_expected;
- step_range_start = inf_status->step_range_start;
- step_range_end = inf_status->step_range_end;
- step_frame_id = inf_status->step_frame_id;
- step_over_calls = inf_status->step_over_calls;
+ tp->trap_expected = inf_status->stepping_over_breakpoint;
+ tp->step_range_start = inf_status->step_range_start;
+ tp->step_range_end = inf_status->step_range_end;
+ tp->step_frame_id = inf_status->step_frame_id;
+ tp->step_over_calls = inf_status->step_over_calls;
stop_after_trap = inf_status->stop_after_trap;
stop_soon = inf_status->stop_soon;
- bpstat_clear (&stop_bpstat);
- stop_bpstat = inf_status->stop_bpstat;
+ bpstat_clear (&tp->stop_bpstat);
+ tp->stop_bpstat = inf_status->stop_bpstat;
breakpoint_proceeded = inf_status->breakpoint_proceeded;
- proceed_to_finish = inf_status->proceed_to_finish;
-
- /* FIXME: Is the restore of stop_registers always needed. */
- regcache_xfree (stop_registers);
- stop_registers = inf_status->stop_registers;
+ tp->proceed_to_finish = inf_status->proceed_to_finish;
/* The inferior can be gone if the user types "print exit(0)"
(and perhaps other times). */
if (target_has_execution)
/* NB: The register write goes through to the target. */
- regcache_cpy (current_regcache, inf_status->registers);
+ regcache_cpy (get_current_regcache (), inf_status->registers);
regcache_xfree (inf_status->registers);
/* FIXME: If we are being called after stopping in a function which
/* See save_inferior_status for info on stop_bpstat. */
bpstat_clear (&inf_status->stop_bpstat);
regcache_xfree (inf_status->registers);
- regcache_xfree (inf_status->stop_registers);
xfree (inf_status);
}
int
-inferior_has_forked (int pid, int *child_pid)
+inferior_has_forked (ptid_t pid, ptid_t *child_pid)
{
struct target_waitstatus last;
ptid_t last_ptid;
if (last.kind != TARGET_WAITKIND_FORKED)
return 0;
- if (ptid_get_pid (last_ptid) != pid)
+ if (!ptid_equal (last_ptid, pid))
return 0;
*child_pid = last.value.related_pid;
}
int
-inferior_has_vforked (int pid, int *child_pid)
+inferior_has_vforked (ptid_t pid, ptid_t *child_pid)
{
struct target_waitstatus last;
ptid_t last_ptid;
if (last.kind != TARGET_WAITKIND_VFORKED)
return 0;
- if (ptid_get_pid (last_ptid) != pid)
+ if (!ptid_equal (last_ptid, pid))
return 0;
*child_pid = last.value.related_pid;
}
int
-inferior_has_execd (int pid, char **execd_pathname)
+inferior_has_execd (ptid_t pid, char **execd_pathname)
{
struct target_waitstatus last;
ptid_t last_ptid;
if (last.kind != TARGET_WAITKIND_EXECD)
return 0;
- if (ptid_get_pid (last_ptid) != pid)
+ if (!ptid_equal (last_ptid, pid))
return 0;
*execd_pathname = xstrdup (last.value.execd_pathname);
}
\f
+int non_stop = 0;
+static int non_stop_1 = 0;
+
+static void
+set_non_stop (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ if (target_has_execution)
+ {
+ non_stop_1 = non_stop;
+ error (_("Cannot change this setting while the inferior is running."));
+ }
+
+ non_stop = non_stop_1;
+}
+
static void
-build_infrun (void)
+show_non_stop (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
- stop_registers = regcache_xmalloc (current_gdbarch);
+ fprintf_filtered (file,
+ _("Controlling the inferior in non-stop mode is %s.\n"),
+ value);
}
+
void
_initialize_infrun (void)
{
int numsigs;
struct cmd_list_element *c;
- DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
- deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
-
add_info ("signals", signals_info, _("\
What debugger does when program gets various signals.\n\
Specify a signal as argument to print info on that signal only."));
show_debug_infrun,
&setdebuglist, &showdebuglist);
+ add_setshow_boolean_cmd ("displaced", class_maintenance, &debug_displaced, _("\
+Set displaced stepping debugging."), _("\
+Show displaced stepping debugging."), _("\
+When non-zero, displaced stepping specific debugging is enabled."),
+ NULL,
+ show_debug_displaced,
+ &setdebuglist, &showdebuglist);
+
+ add_setshow_boolean_cmd ("non-stop", no_class,
+ &non_stop_1, _("\
+Set whether gdb controls the inferior in non-stop mode."), _("\
+Show whether gdb controls the inferior in non-stop mode."), _("\
+When debugging a multi-threaded program and this setting is\n\
+off (the default, also called all-stop mode), when one thread stops\n\
+(for a breakpoint, watchpoint, exception, or similar events), GDB stops\n\
+all other threads in the program while you interact with the thread of\n\
+interest. When you continue or step a thread, you can allow the other\n\
+threads to run, or have them remain stopped, but while you inspect any\n\
+thread's state, all threads stop.\n\
+\n\
+In non-stop mode, when one thread stops, other threads can continue\n\
+to run freely. You'll be able to step each thread independently,\n\
+leave it stopped or free to run as needed."),
+ set_non_stop,
+ show_non_stop,
+ &setlist,
+ &showlist);
+
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_print = (unsigned char *)
show_step_stop_if_no_debug,
&setlist, &showlist);
+ add_setshow_boolean_cmd ("can-use-displaced-stepping", class_maintenance,
+ &can_use_displaced_stepping, _("\
+Set debugger's willingness to use displaced stepping."), _("\
+Show debugger's willingness to use displaced stepping."), _("\
+If zero, gdb will not use displaced stepping to step over\n\
+breakpoints, even if such is supported by the target."),
+ NULL,
+ show_can_use_displaced_stepping,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
+
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);
minus_one_ptid = ptid_build (-1, 0, 0);
inferior_ptid = null_ptid;
target_last_wait_ptid = minus_one_ptid;
+ displaced_step_ptid = null_ptid;
+
+ observer_attach_thread_ptid_changed (infrun_thread_ptid_changed);
}